summaryrefslogtreecommitdiffstats
path: root/drivers/media/tuners/fc0012.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/media/tuners/fc0012.c')
-rw-r--r--drivers/media/tuners/fc0012.c503
1 files changed, 503 insertions, 0 deletions
diff --git a/drivers/media/tuners/fc0012.c b/drivers/media/tuners/fc0012.c
new file mode 100644
index 0000000000..81e65acbdb
--- /dev/null
+++ b/drivers/media/tuners/fc0012.c
@@ -0,0 +1,503 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Fitipower FC0012 tuner driver
+ *
+ * Copyright (C) 2012 Hans-Frieder Vogt <hfvogt@gmx.net>
+ */
+
+#include "fc0012.h"
+#include "fc0012-priv.h"
+
+static int fc0012_writereg(struct fc0012_priv *priv, u8 reg, u8 val)
+{
+ u8 buf[2] = {reg, val};
+ struct i2c_msg msg = {
+ .addr = priv->cfg->i2c_address, .flags = 0, .buf = buf, .len = 2
+ };
+
+ if (i2c_transfer(priv->i2c, &msg, 1) != 1) {
+ dev_err(&priv->i2c->dev,
+ "%s: I2C write reg failed, reg: %02x, val: %02x\n",
+ KBUILD_MODNAME, reg, val);
+ return -EREMOTEIO;
+ }
+ return 0;
+}
+
+static int fc0012_readreg(struct fc0012_priv *priv, u8 reg, u8 *val)
+{
+ struct i2c_msg msg[2] = {
+ { .addr = priv->cfg->i2c_address, .flags = 0,
+ .buf = &reg, .len = 1 },
+ { .addr = priv->cfg->i2c_address, .flags = I2C_M_RD,
+ .buf = val, .len = 1 },
+ };
+
+ if (i2c_transfer(priv->i2c, msg, 2) != 2) {
+ dev_err(&priv->i2c->dev,
+ "%s: I2C read reg failed, reg: %02x\n",
+ KBUILD_MODNAME, reg);
+ return -EREMOTEIO;
+ }
+ return 0;
+}
+
+static void fc0012_release(struct dvb_frontend *fe)
+{
+ kfree(fe->tuner_priv);
+ fe->tuner_priv = NULL;
+}
+
+static int fc0012_init(struct dvb_frontend *fe)
+{
+ struct fc0012_priv *priv = fe->tuner_priv;
+ int i, ret = 0;
+ unsigned char reg[] = {
+ 0x00, /* dummy reg. 0 */
+ 0x05, /* reg. 0x01 */
+ 0x10, /* reg. 0x02 */
+ 0x00, /* reg. 0x03 */
+ 0x00, /* reg. 0x04 */
+ 0x0f, /* reg. 0x05: may also be 0x0a */
+ 0x00, /* reg. 0x06: divider 2, VCO slow */
+ 0x00, /* reg. 0x07: may also be 0x0f */
+ 0xff, /* reg. 0x08: AGC Clock divide by 256, AGC gain 1/256,
+ Loop Bw 1/8 */
+ 0x6e, /* reg. 0x09: Disable LoopThrough, Enable LoopThrough: 0x6f */
+ 0xb8, /* reg. 0x0a: Disable LO Test Buffer */
+ 0x82, /* reg. 0x0b: Output Clock is same as clock frequency,
+ may also be 0x83 */
+ 0xfc, /* reg. 0x0c: depending on AGC Up-Down mode, may need 0xf8 */
+ 0x02, /* reg. 0x0d: AGC Not Forcing & LNA Forcing, 0x02 for DVB-T */
+ 0x00, /* reg. 0x0e */
+ 0x00, /* reg. 0x0f */
+ 0x00, /* reg. 0x10: may also be 0x0d */
+ 0x00, /* reg. 0x11 */
+ 0x1f, /* reg. 0x12: Set to maximum gain */
+ 0x08, /* reg. 0x13: Set to Middle Gain: 0x08,
+ Low Gain: 0x00, High Gain: 0x10, enable IX2: 0x80 */
+ 0x00, /* reg. 0x14 */
+ 0x04, /* reg. 0x15: Enable LNA COMPS */
+ };
+
+ switch (priv->cfg->xtal_freq) {
+ case FC_XTAL_27_MHZ:
+ case FC_XTAL_28_8_MHZ:
+ reg[0x07] |= 0x20;
+ break;
+ case FC_XTAL_36_MHZ:
+ default:
+ break;
+ }
+
+ if (priv->cfg->dual_master)
+ reg[0x0c] |= 0x02;
+
+ if (priv->cfg->loop_through)
+ reg[0x09] |= 0x01;
+
+ if (fe->ops.i2c_gate_ctrl)
+ fe->ops.i2c_gate_ctrl(fe, 1); /* open I2C-gate */
+
+ for (i = 1; i < sizeof(reg); i++) {
+ ret = fc0012_writereg(priv, i, reg[i]);
+ if (ret)
+ break;
+ }
+
+ if (fe->ops.i2c_gate_ctrl)
+ fe->ops.i2c_gate_ctrl(fe, 0); /* close I2C-gate */
+
+ if (ret)
+ dev_err(&priv->i2c->dev, "%s: fc0012_writereg failed: %d\n",
+ KBUILD_MODNAME, ret);
+
+ return ret;
+}
+
+static int fc0012_set_params(struct dvb_frontend *fe)
+{
+ struct fc0012_priv *priv = fe->tuner_priv;
+ int i, ret = 0;
+ struct dtv_frontend_properties *p = &fe->dtv_property_cache;
+ u32 freq = p->frequency / 1000;
+ u32 delsys = p->delivery_system;
+ unsigned char reg[7], am, pm, multi, tmp;
+ unsigned long f_vco;
+ unsigned short xtal_freq_khz_2, xin, xdiv;
+ bool vco_select = false;
+
+ if (fe->callback) {
+ ret = fe->callback(priv->i2c, DVB_FRONTEND_COMPONENT_TUNER,
+ FC_FE_CALLBACK_VHF_ENABLE, (freq > 300000 ? 0 : 1));
+ if (ret)
+ goto exit;
+ }
+
+ switch (priv->cfg->xtal_freq) {
+ case FC_XTAL_27_MHZ:
+ xtal_freq_khz_2 = 27000 / 2;
+ break;
+ case FC_XTAL_36_MHZ:
+ xtal_freq_khz_2 = 36000 / 2;
+ break;
+ case FC_XTAL_28_8_MHZ:
+ default:
+ xtal_freq_khz_2 = 28800 / 2;
+ break;
+ }
+
+ /* select frequency divider and the frequency of VCO */
+ if (freq < 37084) { /* freq * 96 < 3560000 */
+ multi = 96;
+ reg[5] = 0x82;
+ reg[6] = 0x00;
+ } else if (freq < 55625) { /* freq * 64 < 3560000 */
+ multi = 64;
+ reg[5] = 0x82;
+ reg[6] = 0x02;
+ } else if (freq < 74167) { /* freq * 48 < 3560000 */
+ multi = 48;
+ reg[5] = 0x42;
+ reg[6] = 0x00;
+ } else if (freq < 111250) { /* freq * 32 < 3560000 */
+ multi = 32;
+ reg[5] = 0x42;
+ reg[6] = 0x02;
+ } else if (freq < 148334) { /* freq * 24 < 3560000 */
+ multi = 24;
+ reg[5] = 0x22;
+ reg[6] = 0x00;
+ } else if (freq < 222500) { /* freq * 16 < 3560000 */
+ multi = 16;
+ reg[5] = 0x22;
+ reg[6] = 0x02;
+ } else if (freq < 296667) { /* freq * 12 < 3560000 */
+ multi = 12;
+ reg[5] = 0x12;
+ reg[6] = 0x00;
+ } else if (freq < 445000) { /* freq * 8 < 3560000 */
+ multi = 8;
+ reg[5] = 0x12;
+ reg[6] = 0x02;
+ } else if (freq < 593334) { /* freq * 6 < 3560000 */
+ multi = 6;
+ reg[5] = 0x0a;
+ reg[6] = 0x00;
+ } else {
+ multi = 4;
+ reg[5] = 0x0a;
+ reg[6] = 0x02;
+ }
+
+ f_vco = freq * multi;
+
+ if (f_vco >= 3060000) {
+ reg[6] |= 0x08;
+ vco_select = true;
+ }
+
+ if (freq >= 45000) {
+ /* From divided value (XDIV) determined the FA and FP value */
+ xdiv = (unsigned short)(f_vco / xtal_freq_khz_2);
+ if ((f_vco - xdiv * xtal_freq_khz_2) >= (xtal_freq_khz_2 / 2))
+ xdiv++;
+
+ pm = (unsigned char)(xdiv / 8);
+ am = (unsigned char)(xdiv - (8 * pm));
+
+ if (am < 2) {
+ reg[1] = am + 8;
+ reg[2] = pm - 1;
+ } else {
+ reg[1] = am;
+ reg[2] = pm;
+ }
+ } else {
+ /* fix for frequency less than 45 MHz */
+ reg[1] = 0x06;
+ reg[2] = 0x11;
+ }
+
+ /* fix clock out */
+ reg[6] |= 0x20;
+
+ /* From VCO frequency determines the XIN ( fractional part of Delta
+ Sigma PLL) and divided value (XDIV) */
+ xin = (unsigned short)(f_vco - (f_vco / xtal_freq_khz_2) * xtal_freq_khz_2);
+ xin = (xin << 15) / xtal_freq_khz_2;
+ if (xin >= 16384)
+ xin += 32768;
+
+ reg[3] = xin >> 8; /* xin with 9 bit resolution */
+ reg[4] = xin & 0xff;
+
+ if (delsys == SYS_DVBT) {
+ reg[6] &= 0x3f; /* bits 6 and 7 describe the bandwidth */
+ switch (p->bandwidth_hz) {
+ case 6000000:
+ reg[6] |= 0x80;
+ break;
+ case 7000000:
+ reg[6] |= 0x40;
+ break;
+ case 8000000:
+ default:
+ break;
+ }
+ } else {
+ dev_err(&priv->i2c->dev, "%s: modulation type not supported!\n",
+ KBUILD_MODNAME);
+ return -EINVAL;
+ }
+
+ /* modified for Realtek demod */
+ reg[5] |= 0x07;
+
+ if (fe->ops.i2c_gate_ctrl)
+ fe->ops.i2c_gate_ctrl(fe, 1); /* open I2C-gate */
+
+ for (i = 1; i <= 6; i++) {
+ ret = fc0012_writereg(priv, i, reg[i]);
+ if (ret)
+ goto exit;
+ }
+
+ /* VCO Calibration */
+ ret = fc0012_writereg(priv, 0x0e, 0x80);
+ if (!ret)
+ ret = fc0012_writereg(priv, 0x0e, 0x00);
+
+ /* VCO Re-Calibration if needed */
+ if (!ret)
+ ret = fc0012_writereg(priv, 0x0e, 0x00);
+
+ if (!ret) {
+ msleep(10);
+ ret = fc0012_readreg(priv, 0x0e, &tmp);
+ }
+ if (ret)
+ goto exit;
+
+ /* vco selection */
+ tmp &= 0x3f;
+
+ if (vco_select) {
+ if (tmp > 0x3c) {
+ reg[6] &= ~0x08;
+ ret = fc0012_writereg(priv, 0x06, reg[6]);
+ if (!ret)
+ ret = fc0012_writereg(priv, 0x0e, 0x80);
+ if (!ret)
+ ret = fc0012_writereg(priv, 0x0e, 0x00);
+ }
+ } else {
+ if (tmp < 0x02) {
+ reg[6] |= 0x08;
+ ret = fc0012_writereg(priv, 0x06, reg[6]);
+ if (!ret)
+ ret = fc0012_writereg(priv, 0x0e, 0x80);
+ if (!ret)
+ ret = fc0012_writereg(priv, 0x0e, 0x00);
+ }
+ }
+
+ priv->frequency = p->frequency;
+ priv->bandwidth = p->bandwidth_hz;
+
+exit:
+ if (fe->ops.i2c_gate_ctrl)
+ fe->ops.i2c_gate_ctrl(fe, 0); /* close I2C-gate */
+ if (ret)
+ dev_warn(&priv->i2c->dev, "%s: %s failed: %d\n",
+ KBUILD_MODNAME, __func__, ret);
+ return ret;
+}
+
+static int fc0012_get_frequency(struct dvb_frontend *fe, u32 *frequency)
+{
+ struct fc0012_priv *priv = fe->tuner_priv;
+ *frequency = priv->frequency;
+ return 0;
+}
+
+static int fc0012_get_if_frequency(struct dvb_frontend *fe, u32 *frequency)
+{
+ *frequency = 0; /* Zero-IF */
+ return 0;
+}
+
+static int fc0012_get_bandwidth(struct dvb_frontend *fe, u32 *bandwidth)
+{
+ struct fc0012_priv *priv = fe->tuner_priv;
+ *bandwidth = priv->bandwidth;
+ return 0;
+}
+
+#define INPUT_ADC_LEVEL -8
+
+static int fc0012_get_rf_strength(struct dvb_frontend *fe, u16 *strength)
+{
+ struct fc0012_priv *priv = fe->tuner_priv;
+ int ret;
+ unsigned char tmp;
+ int int_temp, lna_gain, int_lna, tot_agc_gain, power;
+ static const int fc0012_lna_gain_table[] = {
+ /* low gain */
+ -63, -58, -99, -73,
+ -63, -65, -54, -60,
+ /* middle gain */
+ 71, 70, 68, 67,
+ 65, 63, 61, 58,
+ /* high gain */
+ 197, 191, 188, 186,
+ 184, 182, 181, 179,
+ };
+
+ if (fe->ops.i2c_gate_ctrl)
+ fe->ops.i2c_gate_ctrl(fe, 1); /* open I2C-gate */
+
+ ret = fc0012_writereg(priv, 0x12, 0x00);
+ if (ret)
+ goto err;
+
+ ret = fc0012_readreg(priv, 0x12, &tmp);
+ if (ret)
+ goto err;
+ int_temp = tmp;
+
+ ret = fc0012_readreg(priv, 0x13, &tmp);
+ if (ret)
+ goto err;
+ lna_gain = tmp & 0x1f;
+
+ if (fe->ops.i2c_gate_ctrl)
+ fe->ops.i2c_gate_ctrl(fe, 0); /* close I2C-gate */
+
+ if (lna_gain < ARRAY_SIZE(fc0012_lna_gain_table)) {
+ int_lna = fc0012_lna_gain_table[lna_gain];
+ tot_agc_gain = (abs((int_temp >> 5) - 7) - 2 +
+ (int_temp & 0x1f)) * 2;
+ power = INPUT_ADC_LEVEL - tot_agc_gain - int_lna / 10;
+
+ if (power >= 45)
+ *strength = 255; /* 100% */
+ else if (power < -95)
+ *strength = 0;
+ else
+ *strength = (power + 95) * 255 / 140;
+
+ *strength |= *strength << 8;
+ } else {
+ ret = -1;
+ }
+
+ goto exit;
+
+err:
+ if (fe->ops.i2c_gate_ctrl)
+ fe->ops.i2c_gate_ctrl(fe, 0); /* close I2C-gate */
+exit:
+ if (ret)
+ dev_warn(&priv->i2c->dev, "%s: %s failed: %d\n",
+ KBUILD_MODNAME, __func__, ret);
+ return ret;
+}
+
+static const struct dvb_tuner_ops fc0012_tuner_ops = {
+ .info = {
+ .name = "Fitipower FC0012",
+
+ .frequency_min_hz = 37 * MHz, /* estimate */
+ .frequency_max_hz = 862 * MHz, /* estimate */
+ },
+
+ .release = fc0012_release,
+
+ .init = fc0012_init,
+
+ .set_params = fc0012_set_params,
+
+ .get_frequency = fc0012_get_frequency,
+ .get_if_frequency = fc0012_get_if_frequency,
+ .get_bandwidth = fc0012_get_bandwidth,
+
+ .get_rf_strength = fc0012_get_rf_strength,
+};
+
+struct dvb_frontend *fc0012_attach(struct dvb_frontend *fe,
+ struct i2c_adapter *i2c, const struct fc0012_config *cfg)
+{
+ struct fc0012_priv *priv;
+ int ret;
+ u8 chip_id;
+
+ if (fe->ops.i2c_gate_ctrl)
+ fe->ops.i2c_gate_ctrl(fe, 1);
+
+ priv = kzalloc(sizeof(struct fc0012_priv), GFP_KERNEL);
+ if (!priv) {
+ ret = -ENOMEM;
+ dev_err(&i2c->dev, "%s: kzalloc() failed\n", KBUILD_MODNAME);
+ goto err;
+ }
+
+ priv->cfg = cfg;
+ priv->i2c = i2c;
+
+ /* check if the tuner is there */
+ ret = fc0012_readreg(priv, 0x00, &chip_id);
+ if (ret < 0)
+ goto err;
+
+ dev_dbg(&i2c->dev, "%s: chip_id=%02x\n", __func__, chip_id);
+
+ switch (chip_id) {
+ case 0xa1:
+ break;
+ default:
+ ret = -ENODEV;
+ goto err;
+ }
+
+ dev_info(&i2c->dev, "%s: Fitipower FC0012 successfully identified\n",
+ KBUILD_MODNAME);
+
+ if (priv->cfg->loop_through) {
+ ret = fc0012_writereg(priv, 0x09, 0x6f);
+ if (ret < 0)
+ goto err;
+ }
+
+ /*
+ * TODO: Clock out en or div?
+ * For dual tuner configuration clearing bit [0] is required.
+ */
+ if (priv->cfg->clock_out) {
+ ret = fc0012_writereg(priv, 0x0b, 0x82);
+ if (ret < 0)
+ goto err;
+ }
+
+ fe->tuner_priv = priv;
+ memcpy(&fe->ops.tuner_ops, &fc0012_tuner_ops,
+ sizeof(struct dvb_tuner_ops));
+
+err:
+ if (fe->ops.i2c_gate_ctrl)
+ fe->ops.i2c_gate_ctrl(fe, 0);
+
+ if (ret) {
+ dev_dbg(&i2c->dev, "%s: failed: %d\n", __func__, ret);
+ kfree(priv);
+ return NULL;
+ }
+
+ return fe;
+}
+EXPORT_SYMBOL_GPL(fc0012_attach);
+
+MODULE_DESCRIPTION("Fitipower FC0012 silicon tuner driver");
+MODULE_AUTHOR("Hans-Frieder Vogt <hfvogt@gmx.net>");
+MODULE_LICENSE("GPL");
+MODULE_VERSION("0.6");
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-01 09:12:10 +0000