1 files changed, 101 insertions, 0 deletions
diff --git a/drivers/media/usb/cx231xx/cx231xx-input.c b/drivers/media/usb/cx231xx/cx231xx-input.c
new file mode 100644
index 0000000000..8149702bcf
--- /dev/null
+++ b/drivers/media/usb/cx231xx/cx231xx-input.c
@@ -0,0 +1,101 @@
+// SPDX-License-Identifier: GPL-2.0
+// cx231xx IR glue driver
+//
+// Copyright (c) 2010 Mauro Carvalho Chehab <mchehab@kernel.org>
+//
+// Polaris (cx231xx) has its support for IR's with a design close to MCE.
+// however, a few designs are using an external I2C chip for IR, instead
+// of using the one provided by the chip.
+// This driver provides support for those extra devices
+
+#include "cx231xx.h"
+#include <linux/slab.h>
+#include <linux/bitrev.h>
+
+#define MODULE_NAME "cx231xx-input"
+
+static int get_key_isdbt(struct IR_i2c *ir, enum rc_proto *protocol,
+			 u32 *pscancode, u8 *toggle)
+{
+	int	rc;
+	u8	cmd, scancode;
+
+	dev_dbg(&ir->rc->dev, "%s\n", __func__);
+
+		/* poll IR chip */
+	rc = i2c_master_recv(ir->c, &cmd, 1);
+	if (rc < 0)
+		return rc;
+	if (rc != 1)
+		return -EIO;
+
+	/* it seems that 0xFE indicates that a button is still hold
+	   down, while 0xff indicates that no button is hold
+	   down. 0xfe sequences are sometimes interrupted by 0xFF */
+
+	if (cmd == 0xff)
+		return 0;
+
+	scancode = bitrev8(cmd);
+
+	dev_dbg(&ir->rc->dev, "cmd %02x, scan = %02x\n", cmd, scancode);
+
+	*protocol = RC_PROTO_OTHER;
+	*pscancode = scancode;
+	*toggle = 0;
+	return 1;
+}
+
+int cx231xx_ir_init(struct cx231xx *dev)
+{
+	struct i2c_board_info info;
+	u8 ir_i2c_bus;
+
+	dev_dbg(dev->dev, "%s\n", __func__);
+
+	/* Only initialize if a rc keycode map is defined */
+	if (!cx231xx_boards[dev->model].rc_map_name)
+		return -ENODEV;
+
+	request_module("ir-kbd-i2c");
+
+	memset(&info, 0, sizeof(struct i2c_board_info));
+	memset(&dev->init_data, 0, sizeof(dev->init_data));
+	dev->init_data.rc_dev = rc_allocate_device(RC_DRIVER_SCANCODE);
+	if (!dev->init_data.rc_dev)
+		return -ENOMEM;
+
+	dev->init_data.name = cx231xx_boards[dev->model].name;
+
+	strscpy(info.type, "ir_video", I2C_NAME_SIZE);
+	info.platform_data = &dev->init_data;
+
+	/*
+	 * Board-dependent values
+	 *
+	 * For now, there's just one type of hardware design using
+	 * an i2c device.
+	 */
+	dev->init_data.get_key = get_key_isdbt;
+	dev->init_data.ir_codes = cx231xx_boards[dev->model].rc_map_name;
+	/* The i2c micro-controller only outputs the cmd part of NEC protocol */
+	dev->init_data.rc_dev->scancode_mask = 0xff;
+	dev->init_data.rc_dev->driver_name = "cx231xx";
+	dev->init_data.type = RC_PROTO_BIT_NEC;
+	info.addr = 0x30;
+
+	/* Load and bind ir-kbd-i2c */
+	ir_i2c_bus = cx231xx_boards[dev->model].ir_i2c_master;
+	dev_dbg(dev->dev, "Trying to bind ir at bus %d, addr 0x%02x\n",
+		ir_i2c_bus, info.addr);
+	dev->ir_i2c_client = i2c_new_client_device(
+		cx231xx_get_i2c_adap(dev, ir_i2c_bus), &info);
+
+	return 0;
+}
+
+void cx231xx_ir_exit(struct cx231xx *dev)
+{
+	i2c_unregister_device(dev->ir_i2c_client);
+	dev->ir_i2c_client = NULL;
+}