diff options
Diffstat (limited to 'drivers/media/usb/dvb-usb-v2/af9035.h')
| -rw-r--r-- | drivers/media/usb/dvb-usb-v2/af9035.h | 156 |
1 files changed, 156 insertions, 0 deletions
diff --git a/drivers/media/usb/dvb-usb-v2/af9035.h b/drivers/media/usb/dvb-usb-v2/af9035.h new file mode 100644 index 0000000000..1533cf346e --- /dev/null +++ b/drivers/media/usb/dvb-usb-v2/af9035.h @@ -0,0 +1,156 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * Afatech AF9035 DVB USB driver + * + * Copyright (C) 2009 Antti Palosaari <crope@iki.fi> + * Copyright (C) 2012 Antti Palosaari <crope@iki.fi> + */ + +#ifndef AF9035_H +#define AF9035_H + +#include <linux/platform_device.h> +#include "dvb_usb.h" +#include "af9033.h" +#include "tua9001.h" +#include "fc0011.h" +#include "fc0012.h" +#include "mxl5007t.h" +#include "tda18218.h" +#include "fc2580.h" +#include "it913x.h" +#include "si2168.h" +#include "si2157.h" + +struct reg_val { + u32 reg; + u8 val; +}; + +struct reg_val_mask { + u32 reg; + u8 val; + u8 mask; +}; + +struct usb_req { + u8 cmd; + u8 mbox; + u8 wlen; + u8 *wbuf; + u8 rlen; + u8 *rbuf; +}; + +struct state { +#define BUF_LEN 64 + u8 buf[BUF_LEN]; + u8 seq; /* packet sequence number */ + u8 prechip_version; + u8 chip_version; + u16 chip_type; + u8 eeprom[256]; + bool no_eeprom; + u8 ir_mode; + u8 ir_type; + u8 dual_mode:1; + u8 no_read:1; + u8 af9033_i2c_addr[2]; + u8 it930x_addresses; + struct af9033_config af9033_config[2]; + struct af9033_ops ops; + #define AF9035_I2C_CLIENT_MAX 4 + struct i2c_client *i2c_client[AF9035_I2C_CLIENT_MAX]; + struct i2c_adapter *i2c_adapter_demod; + struct platform_device *platform_device_tuner[2]; +}; + +struct address_table { + u8 frontend_i2c_addr; + u8 tuner_i2c_addr; + u8 tuner_if_port; +}; + +static const struct address_table it930x_addresses_table[] = { + { 0x67, 0x63, 1 }, + { 0x64, 0x60, 0 }, +}; + +static const u32 clock_lut_af9035[] = { + 20480000, /* FPGA */ + 16384000, /* 16.38 MHz */ + 20480000, /* 20.48 MHz */ + 36000000, /* 36.00 MHz */ + 30000000, /* 30.00 MHz */ + 26000000, /* 26.00 MHz */ + 28000000, /* 28.00 MHz */ + 32000000, /* 32.00 MHz */ + 34000000, /* 34.00 MHz */ + 24000000, /* 24.00 MHz */ + 22000000, /* 22.00 MHz */ + 12000000, /* 12.00 MHz */ +}; + +static const u32 clock_lut_it9135[] = { + 12000000, /* 12.00 MHz */ + 20480000, /* 20.48 MHz */ + 36000000, /* 36.00 MHz */ + 30000000, /* 30.00 MHz */ + 26000000, /* 26.00 MHz */ + 28000000, /* 28.00 MHz */ + 32000000, /* 32.00 MHz */ + 34000000, /* 34.00 MHz */ + 24000000, /* 24.00 MHz */ + 22000000, /* 22.00 MHz */ +}; + +#define AF9035_FIRMWARE_AF9035 "dvb-usb-af9035-02.fw" +#define AF9035_FIRMWARE_IT9135_V1 "dvb-usb-it9135-01.fw" +#define AF9035_FIRMWARE_IT9135_V2 "dvb-usb-it9135-02.fw" +#define AF9035_FIRMWARE_IT9303 "dvb-usb-it9303-01.fw" + +/* + * eeprom is memory mapped as read only. Writing that memory mapped address + * will not corrupt eeprom. + * + * TS mode: + * 0 TS + * 1 DCA + PIP + * 3 PIP + * 5 DCA + PIP (AF9035 only) + * n DCA + * + * Values 0, 3 and 5 are seen to this day. 0 for single TS and 3/5 for dual TS. + */ + +#define EEPROM_BASE_AF9035 0x42f5 +#define EEPROM_BASE_IT9135 0x4994 +#define EEPROM_SHIFT 0x10 + +#define EEPROM_IR_MODE 0x18 +#define EEPROM_TS_MODE 0x31 +#define EEPROM_2ND_DEMOD_ADDR 0x32 +#define EEPROM_IR_TYPE 0x34 +#define EEPROM_1_IF_L 0x38 +#define EEPROM_1_IF_H 0x39 +#define EEPROM_1_TUNER_ID 0x3c +#define EEPROM_2_IF_L 0x48 +#define EEPROM_2_IF_H 0x49 +#define EEPROM_2_TUNER_ID 0x4c + +/* USB commands */ +#define CMD_MEM_RD 0x00 +#define CMD_MEM_WR 0x01 +#define CMD_I2C_RD 0x02 +#define CMD_I2C_WR 0x03 +#define CMD_IR_GET 0x18 +#define CMD_FW_DL 0x21 +#define CMD_FW_QUERYINFO 0x22 +#define CMD_FW_BOOT 0x23 +#define CMD_FW_DL_BEGIN 0x24 +#define CMD_FW_DL_END 0x25 +#define CMD_FW_SCATTER_WR 0x29 +#define CMD_GENERIC_I2C_RD 0x2a +#define CMD_GENERIC_I2C_WR 0x2b + +#endif |