summaryrefslogtreecommitdiffstats
path: root/drivers/media/usb/gspca/sq905c.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/media/usb/gspca/sq905c.c')
-rw-r--r--drivers/media/usb/gspca/sq905c.c330
1 files changed, 330 insertions, 0 deletions
diff --git a/drivers/media/usb/gspca/sq905c.c b/drivers/media/usb/gspca/sq905c.c
new file mode 100644
index 0000000000..6ca947aef2
--- /dev/null
+++ b/drivers/media/usb/gspca/sq905c.c
@@ -0,0 +1,330 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * SQ905C subdriver
+ *
+ * Copyright (C) 2009 Theodore Kilgore
+ */
+
+/*
+ *
+ * This driver uses work done in
+ * libgphoto2/camlibs/digigr8, Copyright (C) Theodore Kilgore.
+ *
+ * This driver has also used as a base the sq905c driver
+ * and may contain code fragments from it.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#define MODULE_NAME "sq905c"
+
+#include <linux/workqueue.h>
+#include <linux/slab.h>
+#include "gspca.h"
+
+MODULE_AUTHOR("Theodore Kilgore <kilgota@auburn.edu>");
+MODULE_DESCRIPTION("GSPCA/SQ905C USB Camera Driver");
+MODULE_LICENSE("GPL");
+
+/* Default timeouts, in ms */
+#define SQ905C_CMD_TIMEOUT 500
+#define SQ905C_DATA_TIMEOUT 1000
+
+/* Maximum transfer size to use. */
+#define SQ905C_MAX_TRANSFER 0x8000
+
+#define FRAME_HEADER_LEN 0x50
+
+/* Commands. These go in the "value" slot. */
+#define SQ905C_CLEAR 0xa0 /* clear everything */
+#define SQ905C_GET_ID 0x14f4 /* Read version number */
+#define SQ905C_CAPTURE_LOW 0xa040 /* Starts capture at 160x120 */
+#define SQ905C_CAPTURE_MED 0x1440 /* Starts capture at 320x240 */
+#define SQ905C_CAPTURE_HI 0x2840 /* Starts capture at 320x240 */
+
+/* For capture, this must go in the "index" slot. */
+#define SQ905C_CAPTURE_INDEX 0x110f
+
+/* Structure to hold all of our device specific stuff */
+struct sd {
+ struct gspca_dev gspca_dev; /* !! must be the first item */
+ const struct v4l2_pix_format *cap_mode;
+ /* Driver stuff */
+ struct work_struct work_struct;
+ struct workqueue_struct *work_thread;
+};
+
+/*
+ * Most of these cameras will do 640x480 and 320x240. 160x120 works
+ * in theory but gives very poor output. Therefore, not supported.
+ * The 0x2770:0x9050 cameras have max resolution of 320x240.
+ */
+static struct v4l2_pix_format sq905c_mode[] = {
+ { 320, 240, V4L2_PIX_FMT_SQ905C, V4L2_FIELD_NONE,
+ .bytesperline = 320,
+ .sizeimage = 320 * 240,
+ .colorspace = V4L2_COLORSPACE_SRGB,
+ .priv = 0},
+ { 640, 480, V4L2_PIX_FMT_SQ905C, V4L2_FIELD_NONE,
+ .bytesperline = 640,
+ .sizeimage = 640 * 480,
+ .colorspace = V4L2_COLORSPACE_SRGB,
+ .priv = 0}
+};
+
+/* Send a command to the camera. */
+static int sq905c_command(struct gspca_dev *gspca_dev, u16 command, u16 index)
+{
+ int ret;
+
+ ret = usb_control_msg(gspca_dev->dev,
+ usb_sndctrlpipe(gspca_dev->dev, 0),
+ USB_REQ_SYNCH_FRAME, /* request */
+ USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+ command, index, NULL, 0,
+ SQ905C_CMD_TIMEOUT);
+ if (ret < 0) {
+ pr_err("%s: usb_control_msg failed (%d)\n", __func__, ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+static int sq905c_read(struct gspca_dev *gspca_dev, u16 command, u16 index,
+ int size)
+{
+ int ret;
+
+ ret = usb_control_msg(gspca_dev->dev,
+ usb_rcvctrlpipe(gspca_dev->dev, 0),
+ USB_REQ_SYNCH_FRAME, /* request */
+ USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+ command, index, gspca_dev->usb_buf, size,
+ SQ905C_CMD_TIMEOUT);
+ if (ret < 0) {
+ pr_err("%s: usb_control_msg failed (%d)\n", __func__, ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+/*
+ * This function is called as a workqueue function and runs whenever the camera
+ * is streaming data. Because it is a workqueue function it is allowed to sleep
+ * so we can use synchronous USB calls. To avoid possible collisions with other
+ * threads attempting to use gspca_dev->usb_buf we take the usb_lock when
+ * performing USB operations using it. In practice we don't really need this
+ * as the camera doesn't provide any controls.
+ */
+static void sq905c_dostream(struct work_struct *work)
+{
+ struct sd *dev = container_of(work, struct sd, work_struct);
+ struct gspca_dev *gspca_dev = &dev->gspca_dev;
+ int bytes_left; /* bytes remaining in current frame. */
+ int data_len; /* size to use for the next read. */
+ int act_len;
+ int packet_type;
+ int ret;
+ u8 *buffer;
+
+ buffer = kmalloc(SQ905C_MAX_TRANSFER, GFP_KERNEL);
+ if (!buffer) {
+ pr_err("Couldn't allocate USB buffer\n");
+ goto quit_stream;
+ }
+
+ while (gspca_dev->present && gspca_dev->streaming) {
+#ifdef CONFIG_PM
+ if (gspca_dev->frozen)
+ break;
+#endif
+ /* Request the header, which tells the size to download */
+ ret = usb_bulk_msg(gspca_dev->dev,
+ usb_rcvbulkpipe(gspca_dev->dev, 0x81),
+ buffer, FRAME_HEADER_LEN, &act_len,
+ SQ905C_DATA_TIMEOUT);
+ gspca_dbg(gspca_dev, D_STREAM,
+ "Got %d bytes out of %d for header\n",
+ act_len, FRAME_HEADER_LEN);
+ if (ret < 0 || act_len < FRAME_HEADER_LEN)
+ goto quit_stream;
+ /* size is read from 4 bytes starting 0x40, little endian */
+ bytes_left = buffer[0x40]|(buffer[0x41]<<8)|(buffer[0x42]<<16)
+ |(buffer[0x43]<<24);
+ gspca_dbg(gspca_dev, D_STREAM, "bytes_left = 0x%x\n",
+ bytes_left);
+ /* We keep the header. It has other information, too. */
+ packet_type = FIRST_PACKET;
+ gspca_frame_add(gspca_dev, packet_type,
+ buffer, FRAME_HEADER_LEN);
+ while (bytes_left > 0 && gspca_dev->present) {
+ data_len = bytes_left > SQ905C_MAX_TRANSFER ?
+ SQ905C_MAX_TRANSFER : bytes_left;
+ ret = usb_bulk_msg(gspca_dev->dev,
+ usb_rcvbulkpipe(gspca_dev->dev, 0x81),
+ buffer, data_len, &act_len,
+ SQ905C_DATA_TIMEOUT);
+ if (ret < 0 || act_len < data_len)
+ goto quit_stream;
+ gspca_dbg(gspca_dev, D_STREAM,
+ "Got %d bytes out of %d for frame\n",
+ data_len, bytes_left);
+ bytes_left -= data_len;
+ if (bytes_left == 0)
+ packet_type = LAST_PACKET;
+ else
+ packet_type = INTER_PACKET;
+ gspca_frame_add(gspca_dev, packet_type,
+ buffer, data_len);
+ }
+ }
+quit_stream:
+ if (gspca_dev->present) {
+ mutex_lock(&gspca_dev->usb_lock);
+ sq905c_command(gspca_dev, SQ905C_CLEAR, 0);
+ mutex_unlock(&gspca_dev->usb_lock);
+ }
+ kfree(buffer);
+}
+
+/* This function is called at probe time just before sd_init */
+static int sd_config(struct gspca_dev *gspca_dev,
+ const struct usb_device_id *id)
+{
+ struct cam *cam = &gspca_dev->cam;
+ struct sd *dev = (struct sd *) gspca_dev;
+ int ret;
+
+ gspca_dbg(gspca_dev, D_PROBE,
+ "SQ9050 camera detected (vid/pid 0x%04X:0x%04X)\n",
+ id->idVendor, id->idProduct);
+
+ ret = sq905c_command(gspca_dev, SQ905C_GET_ID, 0);
+ if (ret < 0) {
+ gspca_err(gspca_dev, "Get version command failed\n");
+ return ret;
+ }
+
+ ret = sq905c_read(gspca_dev, 0xf5, 0, 20);
+ if (ret < 0) {
+ gspca_err(gspca_dev, "Reading version command failed\n");
+ return ret;
+ }
+ /* Note we leave out the usb id and the manufacturing date */
+ gspca_dbg(gspca_dev, D_PROBE,
+ "SQ9050 ID string: %02x - %*ph\n",
+ gspca_dev->usb_buf[3], 6, gspca_dev->usb_buf + 14);
+
+ cam->cam_mode = sq905c_mode;
+ cam->nmodes = 2;
+ if (gspca_dev->usb_buf[15] == 0)
+ cam->nmodes = 1;
+ /* We don't use the buffer gspca allocates so make it small. */
+ cam->bulk_size = 32;
+ cam->bulk = 1;
+ INIT_WORK(&dev->work_struct, sq905c_dostream);
+ return 0;
+}
+
+/* called on streamoff with alt==0 and on disconnect */
+/* the usb_lock is held at entry - restore on exit */
+static void sd_stop0(struct gspca_dev *gspca_dev)
+{
+ struct sd *dev = (struct sd *) gspca_dev;
+
+ /* wait for the work queue to terminate */
+ mutex_unlock(&gspca_dev->usb_lock);
+ /* This waits for sq905c_dostream to finish */
+ destroy_workqueue(dev->work_thread);
+ dev->work_thread = NULL;
+ mutex_lock(&gspca_dev->usb_lock);
+}
+
+/* this function is called at probe and resume time */
+static int sd_init(struct gspca_dev *gspca_dev)
+{
+ /* connect to the camera and reset it. */
+ return sq905c_command(gspca_dev, SQ905C_CLEAR, 0);
+}
+
+/* Set up for getting frames. */
+static int sd_start(struct gspca_dev *gspca_dev)
+{
+ struct sd *dev = (struct sd *) gspca_dev;
+ int ret;
+
+ dev->cap_mode = gspca_dev->cam.cam_mode;
+ /* "Open the shutter" and set size, to start capture */
+ switch (gspca_dev->pixfmt.width) {
+ case 640:
+ gspca_dbg(gspca_dev, D_STREAM, "Start streaming at high resolution\n");
+ dev->cap_mode++;
+ ret = sq905c_command(gspca_dev, SQ905C_CAPTURE_HI,
+ SQ905C_CAPTURE_INDEX);
+ break;
+ default: /* 320 */
+ gspca_dbg(gspca_dev, D_STREAM, "Start streaming at medium resolution\n");
+ ret = sq905c_command(gspca_dev, SQ905C_CAPTURE_MED,
+ SQ905C_CAPTURE_INDEX);
+ }
+
+ if (ret < 0) {
+ gspca_err(gspca_dev, "Start streaming command failed\n");
+ return ret;
+ }
+ /* Start the workqueue function to do the streaming */
+ dev->work_thread = create_singlethread_workqueue(MODULE_NAME);
+ if (!dev->work_thread)
+ return -ENOMEM;
+
+ queue_work(dev->work_thread, &dev->work_struct);
+
+ return 0;
+}
+
+/* Table of supported USB devices */
+static const struct usb_device_id device_table[] = {
+ {USB_DEVICE(0x2770, 0x905c)},
+ {USB_DEVICE(0x2770, 0x9050)},
+ {USB_DEVICE(0x2770, 0x9051)},
+ {USB_DEVICE(0x2770, 0x9052)},
+ {USB_DEVICE(0x2770, 0x913d)},
+ {}
+};
+
+MODULE_DEVICE_TABLE(usb, device_table);
+
+/* sub-driver description */
+static const struct sd_desc sd_desc = {
+ .name = MODULE_NAME,
+ .config = sd_config,
+ .init = sd_init,
+ .start = sd_start,
+ .stop0 = sd_stop0,
+};
+
+/* -- device connect -- */
+static int sd_probe(struct usb_interface *intf,
+ const struct usb_device_id *id)
+{
+ return gspca_dev_probe(intf, id,
+ &sd_desc,
+ sizeof(struct sd),
+ THIS_MODULE);
+}
+
+static struct usb_driver sd_driver = {
+ .name = MODULE_NAME,
+ .id_table = device_table,
+ .probe = sd_probe,
+ .disconnect = gspca_disconnect,
+#ifdef CONFIG_PM
+ .suspend = gspca_suspend,
+ .resume = gspca_resume,
+ .reset_resume = gspca_resume,
+#endif
+};
+
+module_usb_driver(sd_driver);