summaryrefslogtreecommitdiffstats
path: root/drivers/media/usb/pvrusb2/pvrusb2-hdw.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/media/usb/pvrusb2/pvrusb2-hdw.c')
-rw-r--r--drivers/media/usb/pvrusb2/pvrusb2-hdw.c5146
1 files changed, 5146 insertions, 0 deletions
diff --git a/drivers/media/usb/pvrusb2/pvrusb2-hdw.c b/drivers/media/usb/pvrusb2/pvrusb2-hdw.c
new file mode 100644
index 0000000000..29cc207194
--- /dev/null
+++ b/drivers/media/usb/pvrusb2/pvrusb2-hdw.c
@@ -0,0 +1,5146 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ *
+ * Copyright (C) 2005 Mike Isely <isely@pobox.com>
+ */
+
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/firmware.h>
+#include <linux/videodev2.h>
+#include <media/v4l2-common.h>
+#include <media/tuner.h>
+#include "pvrusb2.h"
+#include "pvrusb2-std.h"
+#include "pvrusb2-util.h"
+#include "pvrusb2-hdw.h"
+#include "pvrusb2-i2c-core.h"
+#include "pvrusb2-eeprom.h"
+#include "pvrusb2-hdw-internal.h"
+#include "pvrusb2-encoder.h"
+#include "pvrusb2-debug.h"
+#include "pvrusb2-fx2-cmd.h"
+#include "pvrusb2-wm8775.h"
+#include "pvrusb2-video-v4l.h"
+#include "pvrusb2-cx2584x-v4l.h"
+#include "pvrusb2-cs53l32a.h"
+#include "pvrusb2-audio.h"
+
+#define TV_MIN_FREQ 55250000L
+#define TV_MAX_FREQ 850000000L
+
+/* This defines a minimum interval that the decoder must remain quiet
+ before we are allowed to start it running. */
+#define TIME_MSEC_DECODER_WAIT 50
+
+/* This defines a minimum interval that the decoder must be allowed to run
+ before we can safely begin using its streaming output. */
+#define TIME_MSEC_DECODER_STABILIZATION_WAIT 300
+
+/* This defines a minimum interval that the encoder must remain quiet
+ before we are allowed to configure it. */
+#define TIME_MSEC_ENCODER_WAIT 50
+
+/* This defines the minimum interval that the encoder must successfully run
+ before we consider that the encoder has run at least once since its
+ firmware has been loaded. This measurement is in important for cases
+ where we can't do something until we know that the encoder has been run
+ at least once. */
+#define TIME_MSEC_ENCODER_OK 250
+
+static struct pvr2_hdw *unit_pointers[PVR_NUM] = {[ 0 ... PVR_NUM-1 ] = NULL};
+static DEFINE_MUTEX(pvr2_unit_mtx);
+
+static int ctlchg;
+static int procreload;
+static int tuner[PVR_NUM] = { [0 ... PVR_NUM-1] = -1 };
+static int tolerance[PVR_NUM] = { [0 ... PVR_NUM-1] = 0 };
+static int video_std[PVR_NUM] = { [0 ... PVR_NUM-1] = 0 };
+static int init_pause_msec;
+
+module_param(ctlchg, int, S_IRUGO|S_IWUSR);
+MODULE_PARM_DESC(ctlchg, "0=optimize ctl change 1=always accept new ctl value");
+module_param(init_pause_msec, int, S_IRUGO|S_IWUSR);
+MODULE_PARM_DESC(init_pause_msec, "hardware initialization settling delay");
+module_param(procreload, int, S_IRUGO|S_IWUSR);
+MODULE_PARM_DESC(procreload,
+ "Attempt init failure recovery with firmware reload");
+module_param_array(tuner, int, NULL, 0444);
+MODULE_PARM_DESC(tuner,"specify installed tuner type");
+module_param_array(video_std, int, NULL, 0444);
+MODULE_PARM_DESC(video_std,"specify initial video standard");
+module_param_array(tolerance, int, NULL, 0444);
+MODULE_PARM_DESC(tolerance,"specify stream error tolerance");
+
+/* US Broadcast channel 3 (61.25 MHz), to help with testing */
+static int default_tv_freq = 61250000L;
+/* 104.3 MHz, a usable FM station for my area */
+static int default_radio_freq = 104300000L;
+
+module_param_named(tv_freq, default_tv_freq, int, 0444);
+MODULE_PARM_DESC(tv_freq, "specify initial television frequency");
+module_param_named(radio_freq, default_radio_freq, int, 0444);
+MODULE_PARM_DESC(radio_freq, "specify initial radio frequency");
+
+#define PVR2_CTL_WRITE_ENDPOINT 0x01
+#define PVR2_CTL_READ_ENDPOINT 0x81
+
+#define PVR2_GPIO_IN 0x9008
+#define PVR2_GPIO_OUT 0x900c
+#define PVR2_GPIO_DIR 0x9020
+
+#define trace_firmware(...) pvr2_trace(PVR2_TRACE_FIRMWARE,__VA_ARGS__)
+
+#define PVR2_FIRMWARE_ENDPOINT 0x02
+
+/* size of a firmware chunk */
+#define FIRMWARE_CHUNK_SIZE 0x2000
+
+typedef void (*pvr2_subdev_update_func)(struct pvr2_hdw *,
+ struct v4l2_subdev *);
+
+static const pvr2_subdev_update_func pvr2_module_update_functions[] = {
+ [PVR2_CLIENT_ID_WM8775] = pvr2_wm8775_subdev_update,
+ [PVR2_CLIENT_ID_SAA7115] = pvr2_saa7115_subdev_update,
+ [PVR2_CLIENT_ID_MSP3400] = pvr2_msp3400_subdev_update,
+ [PVR2_CLIENT_ID_CX25840] = pvr2_cx25840_subdev_update,
+ [PVR2_CLIENT_ID_CS53L32A] = pvr2_cs53l32a_subdev_update,
+};
+
+static const char *module_names[] = {
+ [PVR2_CLIENT_ID_MSP3400] = "msp3400",
+ [PVR2_CLIENT_ID_CX25840] = "cx25840",
+ [PVR2_CLIENT_ID_SAA7115] = "saa7115",
+ [PVR2_CLIENT_ID_TUNER] = "tuner",
+ [PVR2_CLIENT_ID_DEMOD] = "tuner",
+ [PVR2_CLIENT_ID_CS53L32A] = "cs53l32a",
+ [PVR2_CLIENT_ID_WM8775] = "wm8775",
+};
+
+
+static const unsigned char *module_i2c_addresses[] = {
+ [PVR2_CLIENT_ID_TUNER] = "\x60\x61\x62\x63",
+ [PVR2_CLIENT_ID_DEMOD] = "\x43",
+ [PVR2_CLIENT_ID_MSP3400] = "\x40",
+ [PVR2_CLIENT_ID_SAA7115] = "\x21",
+ [PVR2_CLIENT_ID_WM8775] = "\x1b",
+ [PVR2_CLIENT_ID_CX25840] = "\x44",
+ [PVR2_CLIENT_ID_CS53L32A] = "\x11",
+};
+
+
+static const char *ir_scheme_names[] = {
+ [PVR2_IR_SCHEME_NONE] = "none",
+ [PVR2_IR_SCHEME_29XXX] = "29xxx",
+ [PVR2_IR_SCHEME_24XXX] = "24xxx (29xxx emulation)",
+ [PVR2_IR_SCHEME_24XXX_MCE] = "24xxx (MCE device)",
+ [PVR2_IR_SCHEME_ZILOG] = "Zilog",
+};
+
+
+/* Define the list of additional controls we'll dynamically construct based
+ on query of the cx2341x module. */
+struct pvr2_mpeg_ids {
+ const char *strid;
+ int id;
+};
+static const struct pvr2_mpeg_ids mpeg_ids[] = {
+ {
+ .strid = "audio_layer",
+ .id = V4L2_CID_MPEG_AUDIO_ENCODING,
+ },{
+ .strid = "audio_bitrate",
+ .id = V4L2_CID_MPEG_AUDIO_L2_BITRATE,
+ },{
+ /* Already using audio_mode elsewhere :-( */
+ .strid = "mpeg_audio_mode",
+ .id = V4L2_CID_MPEG_AUDIO_MODE,
+ },{
+ .strid = "mpeg_audio_mode_extension",
+ .id = V4L2_CID_MPEG_AUDIO_MODE_EXTENSION,
+ },{
+ .strid = "audio_emphasis",
+ .id = V4L2_CID_MPEG_AUDIO_EMPHASIS,
+ },{
+ .strid = "audio_crc",
+ .id = V4L2_CID_MPEG_AUDIO_CRC,
+ },{
+ .strid = "video_aspect",
+ .id = V4L2_CID_MPEG_VIDEO_ASPECT,
+ },{
+ .strid = "video_b_frames",
+ .id = V4L2_CID_MPEG_VIDEO_B_FRAMES,
+ },{
+ .strid = "video_gop_size",
+ .id = V4L2_CID_MPEG_VIDEO_GOP_SIZE,
+ },{
+ .strid = "video_gop_closure",
+ .id = V4L2_CID_MPEG_VIDEO_GOP_CLOSURE,
+ },{
+ .strid = "video_bitrate_mode",
+ .id = V4L2_CID_MPEG_VIDEO_BITRATE_MODE,
+ },{
+ .strid = "video_bitrate",
+ .id = V4L2_CID_MPEG_VIDEO_BITRATE,
+ },{
+ .strid = "video_bitrate_peak",
+ .id = V4L2_CID_MPEG_VIDEO_BITRATE_PEAK,
+ },{
+ .strid = "video_temporal_decimation",
+ .id = V4L2_CID_MPEG_VIDEO_TEMPORAL_DECIMATION,
+ },{
+ .strid = "stream_type",
+ .id = V4L2_CID_MPEG_STREAM_TYPE,
+ },{
+ .strid = "video_spatial_filter_mode",
+ .id = V4L2_CID_MPEG_CX2341X_VIDEO_SPATIAL_FILTER_MODE,
+ },{
+ .strid = "video_spatial_filter",
+ .id = V4L2_CID_MPEG_CX2341X_VIDEO_SPATIAL_FILTER,
+ },{
+ .strid = "video_luma_spatial_filter_type",
+ .id = V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_SPATIAL_FILTER_TYPE,
+ },{
+ .strid = "video_chroma_spatial_filter_type",
+ .id = V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_SPATIAL_FILTER_TYPE,
+ },{
+ .strid = "video_temporal_filter_mode",
+ .id = V4L2_CID_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER_MODE,
+ },{
+ .strid = "video_temporal_filter",
+ .id = V4L2_CID_MPEG_CX2341X_VIDEO_TEMPORAL_FILTER,
+ },{
+ .strid = "video_median_filter_type",
+ .id = V4L2_CID_MPEG_CX2341X_VIDEO_MEDIAN_FILTER_TYPE,
+ },{
+ .strid = "video_luma_median_filter_top",
+ .id = V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_MEDIAN_FILTER_TOP,
+ },{
+ .strid = "video_luma_median_filter_bottom",
+ .id = V4L2_CID_MPEG_CX2341X_VIDEO_LUMA_MEDIAN_FILTER_BOTTOM,
+ },{
+ .strid = "video_chroma_median_filter_top",
+ .id = V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_MEDIAN_FILTER_TOP,
+ },{
+ .strid = "video_chroma_median_filter_bottom",
+ .id = V4L2_CID_MPEG_CX2341X_VIDEO_CHROMA_MEDIAN_FILTER_BOTTOM,
+ }
+};
+#define MPEGDEF_COUNT ARRAY_SIZE(mpeg_ids)
+
+
+static const char *control_values_srate[] = {
+ [V4L2_MPEG_AUDIO_SAMPLING_FREQ_44100] = "44.1 kHz",
+ [V4L2_MPEG_AUDIO_SAMPLING_FREQ_48000] = "48 kHz",
+ [V4L2_MPEG_AUDIO_SAMPLING_FREQ_32000] = "32 kHz",
+};
+
+
+
+static const char *control_values_input[] = {
+ [PVR2_CVAL_INPUT_TV] = "television", /*xawtv needs this name*/
+ [PVR2_CVAL_INPUT_DTV] = "dtv",
+ [PVR2_CVAL_INPUT_RADIO] = "radio",
+ [PVR2_CVAL_INPUT_SVIDEO] = "s-video",
+ [PVR2_CVAL_INPUT_COMPOSITE] = "composite",
+};
+
+
+static const char *control_values_audiomode[] = {
+ [V4L2_TUNER_MODE_MONO] = "Mono",
+ [V4L2_TUNER_MODE_STEREO] = "Stereo",
+ [V4L2_TUNER_MODE_LANG1] = "Lang1",
+ [V4L2_TUNER_MODE_LANG2] = "Lang2",
+ [V4L2_TUNER_MODE_LANG1_LANG2] = "Lang1+Lang2",
+};
+
+
+static const char *control_values_hsm[] = {
+ [PVR2_CVAL_HSM_FAIL] = "Fail",
+ [PVR2_CVAL_HSM_HIGH] = "High",
+ [PVR2_CVAL_HSM_FULL] = "Full",
+};
+
+
+static const char *pvr2_state_names[] = {
+ [PVR2_STATE_NONE] = "none",
+ [PVR2_STATE_DEAD] = "dead",
+ [PVR2_STATE_COLD] = "cold",
+ [PVR2_STATE_WARM] = "warm",
+ [PVR2_STATE_ERROR] = "error",
+ [PVR2_STATE_READY] = "ready",
+ [PVR2_STATE_RUN] = "run",
+};
+
+
+struct pvr2_fx2cmd_descdef {
+ unsigned char id;
+ unsigned char *desc;
+};
+
+static const struct pvr2_fx2cmd_descdef pvr2_fx2cmd_desc[] = {
+ {FX2CMD_MEM_WRITE_DWORD, "write encoder dword"},
+ {FX2CMD_MEM_READ_DWORD, "read encoder dword"},
+ {FX2CMD_HCW_ZILOG_RESET, "zilog IR reset control"},
+ {FX2CMD_MEM_READ_64BYTES, "read encoder 64bytes"},
+ {FX2CMD_REG_WRITE, "write encoder register"},
+ {FX2CMD_REG_READ, "read encoder register"},
+ {FX2CMD_MEMSEL, "encoder memsel"},
+ {FX2CMD_I2C_WRITE, "i2c write"},
+ {FX2CMD_I2C_READ, "i2c read"},
+ {FX2CMD_GET_USB_SPEED, "get USB speed"},
+ {FX2CMD_STREAMING_ON, "stream on"},
+ {FX2CMD_STREAMING_OFF, "stream off"},
+ {FX2CMD_FWPOST1, "fwpost1"},
+ {FX2CMD_POWER_OFF, "power off"},
+ {FX2CMD_POWER_ON, "power on"},
+ {FX2CMD_DEEP_RESET, "deep reset"},
+ {FX2CMD_GET_EEPROM_ADDR, "get rom addr"},
+ {FX2CMD_GET_IR_CODE, "get IR code"},
+ {FX2CMD_HCW_DEMOD_RESETIN, "hcw demod resetin"},
+ {FX2CMD_HCW_DTV_STREAMING_ON, "hcw dtv stream on"},
+ {FX2CMD_HCW_DTV_STREAMING_OFF, "hcw dtv stream off"},
+ {FX2CMD_ONAIR_DTV_STREAMING_ON, "onair dtv stream on"},
+ {FX2CMD_ONAIR_DTV_STREAMING_OFF, "onair dtv stream off"},
+ {FX2CMD_ONAIR_DTV_POWER_ON, "onair dtv power on"},
+ {FX2CMD_ONAIR_DTV_POWER_OFF, "onair dtv power off"},
+ {FX2CMD_HCW_DEMOD_RESET_PIN, "hcw demod reset pin"},
+ {FX2CMD_HCW_MAKO_SLEEP_PIN, "hcw mako sleep pin"},
+};
+
+
+static int pvr2_hdw_set_input(struct pvr2_hdw *hdw,int v);
+static void pvr2_hdw_state_sched(struct pvr2_hdw *);
+static int pvr2_hdw_state_eval(struct pvr2_hdw *);
+static void pvr2_hdw_set_cur_freq(struct pvr2_hdw *,unsigned long);
+static void pvr2_hdw_worker_poll(struct work_struct *work);
+static int pvr2_hdw_wait(struct pvr2_hdw *,int state);
+static int pvr2_hdw_untrip_unlocked(struct pvr2_hdw *);
+static void pvr2_hdw_state_log_state(struct pvr2_hdw *);
+static int pvr2_hdw_cmd_usbstream(struct pvr2_hdw *hdw,int runFl);
+static int pvr2_hdw_commit_setup(struct pvr2_hdw *hdw);
+static int pvr2_hdw_get_eeprom_addr(struct pvr2_hdw *hdw);
+static void pvr2_hdw_quiescent_timeout(struct timer_list *);
+static void pvr2_hdw_decoder_stabilization_timeout(struct timer_list *);
+static void pvr2_hdw_encoder_wait_timeout(struct timer_list *);
+static void pvr2_hdw_encoder_run_timeout(struct timer_list *);
+static int pvr2_issue_simple_cmd(struct pvr2_hdw *,u32);
+static int pvr2_send_request_ex(struct pvr2_hdw *hdw,
+ unsigned int timeout,int probe_fl,
+ void *write_data,unsigned int write_len,
+ void *read_data,unsigned int read_len);
+static int pvr2_hdw_check_cropcap(struct pvr2_hdw *hdw);
+static v4l2_std_id pvr2_hdw_get_detected_std(struct pvr2_hdw *hdw);
+
+static void trace_stbit(const char *name,int val)
+{
+ pvr2_trace(PVR2_TRACE_STBITS,
+ "State bit %s <-- %s",
+ name,(val ? "true" : "false"));
+}
+
+static int ctrl_channelfreq_get(struct pvr2_ctrl *cptr,int *vp)
+{
+ struct pvr2_hdw *hdw = cptr->hdw;
+ if ((hdw->freqProgSlot > 0) && (hdw->freqProgSlot <= FREQTABLE_SIZE)) {
+ *vp = hdw->freqTable[hdw->freqProgSlot-1];
+ } else {
+ *vp = 0;
+ }
+ return 0;
+}
+
+static int ctrl_channelfreq_set(struct pvr2_ctrl *cptr,int m,int v)
+{
+ struct pvr2_hdw *hdw = cptr->hdw;
+ unsigned int slotId = hdw->freqProgSlot;
+ if ((slotId > 0) && (slotId <= FREQTABLE_SIZE)) {
+ hdw->freqTable[slotId-1] = v;
+ /* Handle side effects correctly - if we're tuned to this
+ slot, then forgot the slot id relation since the stored
+ frequency has been changed. */
+ if (hdw->freqSelector) {
+ if (hdw->freqSlotRadio == slotId) {
+ hdw->freqSlotRadio = 0;
+ }
+ } else {
+ if (hdw->freqSlotTelevision == slotId) {
+ hdw->freqSlotTelevision = 0;
+ }
+ }
+ }
+ return 0;
+}
+
+static int ctrl_channelprog_get(struct pvr2_ctrl *cptr,int *vp)
+{
+ *vp = cptr->hdw->freqProgSlot;
+ return 0;
+}
+
+static int ctrl_channelprog_set(struct pvr2_ctrl *cptr,int m,int v)
+{
+ struct pvr2_hdw *hdw = cptr->hdw;
+ if ((v >= 0) && (v <= FREQTABLE_SIZE)) {
+ hdw->freqProgSlot = v;
+ }
+ return 0;
+}
+
+static int ctrl_channel_get(struct pvr2_ctrl *cptr,int *vp)
+{
+ struct pvr2_hdw *hdw = cptr->hdw;
+ *vp = hdw->freqSelector ? hdw->freqSlotRadio : hdw->freqSlotTelevision;
+ return 0;
+}
+
+static int ctrl_channel_set(struct pvr2_ctrl *cptr,int m,int slotId)
+{
+ unsigned freq = 0;
+ struct pvr2_hdw *hdw = cptr->hdw;
+ if ((slotId < 0) || (slotId > FREQTABLE_SIZE)) return 0;
+ if (slotId > 0) {
+ freq = hdw->freqTable[slotId-1];
+ if (!freq) return 0;
+ pvr2_hdw_set_cur_freq(hdw,freq);
+ }
+ if (hdw->freqSelector) {
+ hdw->freqSlotRadio = slotId;
+ } else {
+ hdw->freqSlotTelevision = slotId;
+ }
+ return 0;
+}
+
+static int ctrl_freq_get(struct pvr2_ctrl *cptr,int *vp)
+{
+ *vp = pvr2_hdw_get_cur_freq(cptr->hdw);
+ return 0;
+}
+
+static int ctrl_freq_is_dirty(struct pvr2_ctrl *cptr)
+{
+ return cptr->hdw->freqDirty != 0;
+}
+
+static void ctrl_freq_clear_dirty(struct pvr2_ctrl *cptr)
+{
+ cptr->hdw->freqDirty = 0;
+}
+
+static int ctrl_freq_set(struct pvr2_ctrl *cptr,int m,int v)
+{
+ pvr2_hdw_set_cur_freq(cptr->hdw,v);
+ return 0;
+}
+
+static int ctrl_cropl_min_get(struct pvr2_ctrl *cptr, int *left)
+{
+ struct v4l2_cropcap *cap = &cptr->hdw->cropcap_info;
+ int stat = pvr2_hdw_check_cropcap(cptr->hdw);
+ if (stat != 0) {
+ return stat;
+ }
+ *left = cap->bounds.left;
+ return 0;
+}
+
+static int ctrl_cropl_max_get(struct pvr2_ctrl *cptr, int *left)
+{
+ struct v4l2_cropcap *cap = &cptr->hdw->cropcap_info;
+ int stat = pvr2_hdw_check_cropcap(cptr->hdw);
+ if (stat != 0) {
+ return stat;
+ }
+ *left = cap->bounds.left;
+ if (cap->bounds.width > cptr->hdw->cropw_val) {
+ *left += cap->bounds.width - cptr->hdw->cropw_val;
+ }
+ return 0;
+}
+
+static int ctrl_cropt_min_get(struct pvr2_ctrl *cptr, int *top)
+{
+ struct v4l2_cropcap *cap = &cptr->hdw->cropcap_info;
+ int stat = pvr2_hdw_check_cropcap(cptr->hdw);
+ if (stat != 0) {
+ return stat;
+ }
+ *top = cap->bounds.top;
+ return 0;
+}
+
+static int ctrl_cropt_max_get(struct pvr2_ctrl *cptr, int *top)
+{
+ struct v4l2_cropcap *cap = &cptr->hdw->cropcap_info;
+ int stat = pvr2_hdw_check_cropcap(cptr->hdw);
+ if (stat != 0) {
+ return stat;
+ }
+ *top = cap->bounds.top;
+ if (cap->bounds.height > cptr->hdw->croph_val) {
+ *top += cap->bounds.height - cptr->hdw->croph_val;
+ }
+ return 0;
+}
+
+static int ctrl_cropw_max_get(struct pvr2_ctrl *cptr, int *width)
+{
+ struct v4l2_cropcap *cap = &cptr->hdw->cropcap_info;
+ int stat, bleftend, cleft;
+
+ stat = pvr2_hdw_check_cropcap(cptr->hdw);
+ if (stat != 0) {
+ return stat;
+ }
+ bleftend = cap->bounds.left+cap->bounds.width;
+ cleft = cptr->hdw->cropl_val;
+
+ *width = cleft < bleftend ? bleftend-cleft : 0;
+ return 0;
+}
+
+static int ctrl_croph_max_get(struct pvr2_ctrl *cptr, int *height)
+{
+ struct v4l2_cropcap *cap = &cptr->hdw->cropcap_info;
+ int stat, btopend, ctop;
+
+ stat = pvr2_hdw_check_cropcap(cptr->hdw);
+ if (stat != 0) {
+ return stat;
+ }
+ btopend = cap->bounds.top+cap->bounds.height;
+ ctop = cptr->hdw->cropt_val;
+
+ *height = ctop < btopend ? btopend-ctop : 0;
+ return 0;
+}
+
+static int ctrl_get_cropcapbl(struct pvr2_ctrl *cptr, int *val)
+{
+ struct v4l2_cropcap *cap = &cptr->hdw->cropcap_info;
+ int stat = pvr2_hdw_check_cropcap(cptr->hdw);
+ if (stat != 0) {
+ return stat;
+ }
+ *val = cap->bounds.left;
+ return 0;
+}
+
+static int ctrl_get_cropcapbt(struct pvr2_ctrl *cptr, int *val)
+{
+ struct v4l2_cropcap *cap = &cptr->hdw->cropcap_info;
+ int stat = pvr2_hdw_check_cropcap(cptr->hdw);
+ if (stat != 0) {
+ return stat;
+ }
+ *val = cap->bounds.top;
+ return 0;
+}
+
+static int ctrl_get_cropcapbw(struct pvr2_ctrl *cptr, int *val)
+{
+ struct v4l2_cropcap *cap = &cptr->hdw->cropcap_info;
+ int stat = pvr2_hdw_check_cropcap(cptr->hdw);
+ if (stat != 0) {
+ return stat;
+ }
+ *val = cap->bounds.width;
+ return 0;
+}
+
+static int ctrl_get_cropcapbh(struct pvr2_ctrl *cptr, int *val)
+{
+ struct v4l2_cropcap *cap = &cptr->hdw->cropcap_info;
+ int stat = pvr2_hdw_check_cropcap(cptr->hdw);
+ if (stat != 0) {
+ return stat;
+ }
+ *val = cap->bounds.height;
+ return 0;
+}
+
+static int ctrl_get_cropcapdl(struct pvr2_ctrl *cptr, int *val)
+{
+ struct v4l2_cropcap *cap = &cptr->hdw->cropcap_info;
+ int stat = pvr2_hdw_check_cropcap(cptr->hdw);
+ if (stat != 0) {
+ return stat;
+ }
+ *val = cap->defrect.left;
+ return 0;
+}
+
+static int ctrl_get_cropcapdt(struct pvr2_ctrl *cptr, int *val)
+{
+ struct v4l2_cropcap *cap = &cptr->hdw->cropcap_info;
+ int stat = pvr2_hdw_check_cropcap(cptr->hdw);
+ if (stat != 0) {
+ return stat;
+ }
+ *val = cap->defrect.top;
+ return 0;
+}
+
+static int ctrl_get_cropcapdw(struct pvr2_ctrl *cptr, int *val)
+{
+ struct v4l2_cropcap *cap = &cptr->hdw->cropcap_info;
+ int stat = pvr2_hdw_check_cropcap(cptr->hdw);
+ if (stat != 0) {
+ return stat;
+ }
+ *val = cap->defrect.width;
+ return 0;
+}
+
+static int ctrl_get_cropcapdh(struct pvr2_ctrl *cptr, int *val)
+{
+ struct v4l2_cropcap *cap = &cptr->hdw->cropcap_info;
+ int stat = pvr2_hdw_check_cropcap(cptr->hdw);
+ if (stat != 0) {
+ return stat;
+ }
+ *val = cap->defrect.height;
+ return 0;
+}
+
+static int ctrl_get_cropcappan(struct pvr2_ctrl *cptr, int *val)
+{
+ struct v4l2_cropcap *cap = &cptr->hdw->cropcap_info;
+ int stat = pvr2_hdw_check_cropcap(cptr->hdw);
+ if (stat != 0) {
+ return stat;
+ }
+ *val = cap->pixelaspect.numerator;
+ return 0;
+}
+
+static int ctrl_get_cropcappad(struct pvr2_ctrl *cptr, int *val)
+{
+ struct v4l2_cropcap *cap = &cptr->hdw->cropcap_info;
+ int stat = pvr2_hdw_check_cropcap(cptr->hdw);
+ if (stat != 0) {
+ return stat;
+ }
+ *val = cap->pixelaspect.denominator;
+ return 0;
+}
+
+static int ctrl_vres_max_get(struct pvr2_ctrl *cptr,int *vp)
+{
+ /* Actual maximum depends on the video standard in effect. */
+ if (cptr->hdw->std_mask_cur & V4L2_STD_525_60) {
+ *vp = 480;
+ } else {
+ *vp = 576;
+ }
+ return 0;
+}
+
+static int ctrl_vres_min_get(struct pvr2_ctrl *cptr,int *vp)
+{
+ /* Actual minimum depends on device digitizer type. */
+ if (cptr->hdw->hdw_desc->flag_has_cx25840) {
+ *vp = 75;
+ } else {
+ *vp = 17;
+ }
+ return 0;
+}
+
+static int ctrl_get_input(struct pvr2_ctrl *cptr,int *vp)
+{
+ *vp = cptr->hdw->input_val;
+ return 0;
+}
+
+static int ctrl_check_input(struct pvr2_ctrl *cptr,int v)
+{
+ if (v < 0 || v > PVR2_CVAL_INPUT_MAX)
+ return 0;
+ return ((1UL << v) & cptr->hdw->input_allowed_mask) != 0;
+}
+
+static int ctrl_set_input(struct pvr2_ctrl *cptr,int m,int v)
+{
+ return pvr2_hdw_set_input(cptr->hdw,v);
+}
+
+static int ctrl_isdirty_input(struct pvr2_ctrl *cptr)
+{
+ return cptr->hdw->input_dirty != 0;
+}
+
+static void ctrl_cleardirty_input(struct pvr2_ctrl *cptr)
+{
+ cptr->hdw->input_dirty = 0;
+}
+
+
+static int ctrl_freq_max_get(struct pvr2_ctrl *cptr, int *vp)
+{
+ unsigned long fv;
+ struct pvr2_hdw *hdw = cptr->hdw;
+ if (hdw->tuner_signal_stale) {
+ pvr2_hdw_status_poll(hdw);
+ }
+ fv = hdw->tuner_signal_info.rangehigh;
+ if (!fv) {
+ /* Safety fallback */
+ *vp = TV_MAX_FREQ;
+ return 0;
+ }
+ if (hdw->tuner_signal_info.capability & V4L2_TUNER_CAP_LOW) {
+ fv = (fv * 125) / 2;
+ } else {
+ fv = fv * 62500;
+ }
+ *vp = fv;
+ return 0;
+}
+
+static int ctrl_freq_min_get(struct pvr2_ctrl *cptr, int *vp)
+{
+ unsigned long fv;
+ struct pvr2_hdw *hdw = cptr->hdw;
+ if (hdw->tuner_signal_stale) {
+ pvr2_hdw_status_poll(hdw);
+ }
+ fv = hdw->tuner_signal_info.rangelow;
+ if (!fv) {
+ /* Safety fallback */
+ *vp = TV_MIN_FREQ;
+ return 0;
+ }
+ if (hdw->tuner_signal_info.capability & V4L2_TUNER_CAP_LOW) {
+ fv = (fv * 125) / 2;
+ } else {
+ fv = fv * 62500;
+ }
+ *vp = fv;
+ return 0;
+}
+
+static int ctrl_cx2341x_is_dirty(struct pvr2_ctrl *cptr)
+{
+ return cptr->hdw->enc_stale != 0;
+}
+
+static void ctrl_cx2341x_clear_dirty(struct pvr2_ctrl *cptr)
+{
+ cptr->hdw->enc_stale = 0;
+ cptr->hdw->enc_unsafe_stale = 0;
+}
+
+static int ctrl_cx2341x_get(struct pvr2_ctrl *cptr,int *vp)
+{
+ int ret;
+ struct v4l2_ext_controls cs;
+ struct v4l2_ext_control c1;
+ memset(&cs,0,sizeof(cs));
+ memset(&c1,0,sizeof(c1));
+ cs.controls = &c1;
+ cs.count = 1;
+ c1.id = cptr->info->v4l_id;
+ ret = cx2341x_ext_ctrls(&cptr->hdw->enc_ctl_state, 0, &cs,
+ VIDIOC_G_EXT_CTRLS);
+ if (ret) return ret;
+ *vp = c1.value;
+ return 0;
+}
+
+static int ctrl_cx2341x_set(struct pvr2_ctrl *cptr,int m,int v)
+{
+ int ret;
+ struct pvr2_hdw *hdw = cptr->hdw;
+ struct v4l2_ext_controls cs;
+ struct v4l2_ext_control c1;
+ memset(&cs,0,sizeof(cs));
+ memset(&c1,0,sizeof(c1));
+ cs.controls = &c1;
+ cs.count = 1;
+ c1.id = cptr->info->v4l_id;
+ c1.value = v;
+ ret = cx2341x_ext_ctrls(&hdw->enc_ctl_state,
+ hdw->state_encoder_run, &cs,
+ VIDIOC_S_EXT_CTRLS);
+ if (ret == -EBUSY) {
+ /* Oops. cx2341x is telling us it's not safe to change
+ this control while we're capturing. Make a note of this
+ fact so that the pipeline will be stopped the next time
+ controls are committed. Then go on ahead and store this
+ change anyway. */
+ ret = cx2341x_ext_ctrls(&hdw->enc_ctl_state,
+ 0, &cs,
+ VIDIOC_S_EXT_CTRLS);
+ if (!ret) hdw->enc_unsafe_stale = !0;
+ }
+ if (ret) return ret;
+ hdw->enc_stale = !0;
+ return 0;
+}
+
+static unsigned int ctrl_cx2341x_getv4lflags(struct pvr2_ctrl *cptr)
+{
+ struct v4l2_queryctrl qctrl = {};
+ struct pvr2_ctl_info *info;
+ qctrl.id = cptr->info->v4l_id;
+ cx2341x_ctrl_query(&cptr->hdw->enc_ctl_state,&qctrl);
+ /* Strip out the const so we can adjust a function pointer. It's
+ OK to do this here because we know this is a dynamically created
+ control, so the underlying storage for the info pointer is (a)
+ private to us, and (b) not in read-only storage. Either we do
+ this or we significantly complicate the underlying control
+ implementation. */
+ info = (struct pvr2_ctl_info *)(cptr->info);
+ if (qctrl.flags & V4L2_CTRL_FLAG_READ_ONLY) {
+ if (info->set_value) {
+ info->set_value = NULL;
+ }
+ } else {
+ if (!(info->set_value)) {
+ info->set_value = ctrl_cx2341x_set;
+ }
+ }
+ return qctrl.flags;
+}
+
+static int ctrl_streamingenabled_get(struct pvr2_ctrl *cptr,int *vp)
+{
+ *vp = cptr->hdw->state_pipeline_req;
+ return 0;
+}
+
+static int ctrl_masterstate_get(struct pvr2_ctrl *cptr,int *vp)
+{
+ *vp = cptr->hdw->master_state;
+ return 0;
+}
+
+static int ctrl_hsm_get(struct pvr2_ctrl *cptr,int *vp)
+{
+ int result = pvr2_hdw_is_hsm(cptr->hdw);
+ *vp = PVR2_CVAL_HSM_FULL;
+ if (result < 0) *vp = PVR2_CVAL_HSM_FAIL;
+ if (result) *vp = PVR2_CVAL_HSM_HIGH;
+ return 0;
+}
+
+static int ctrl_stddetect_get(struct pvr2_ctrl *cptr, int *vp)
+{
+ *vp = pvr2_hdw_get_detected_std(cptr->hdw);
+ return 0;
+}
+
+static int ctrl_stdavail_get(struct pvr2_ctrl *cptr,int *vp)
+{
+ *vp = cptr->hdw->std_mask_avail;
+ return 0;
+}
+
+static int ctrl_stdavail_set(struct pvr2_ctrl *cptr,int m,int v)
+{
+ struct pvr2_hdw *hdw = cptr->hdw;
+ v4l2_std_id ns;
+ ns = hdw->std_mask_avail;
+ ns = (ns & ~m) | (v & m);
+ if (ns == hdw->std_mask_avail) return 0;
+ hdw->std_mask_avail = ns;
+ hdw->std_info_cur.def.type_bitmask.valid_bits = hdw->std_mask_avail;
+ return 0;
+}
+
+static int ctrl_std_val_to_sym(struct pvr2_ctrl *cptr,int msk,int val,
+ char *bufPtr,unsigned int bufSize,
+ unsigned int *len)
+{
+ *len = pvr2_std_id_to_str(bufPtr,bufSize,msk & val);
+ return 0;
+}
+
+static int ctrl_std_sym_to_val(struct pvr2_ctrl *cptr,
+ const char *bufPtr,unsigned int bufSize,
+ int *mskp,int *valp)
+{
+ v4l2_std_id id;
+ if (!pvr2_std_str_to_id(&id, bufPtr, bufSize))
+ return -EINVAL;
+ if (mskp) *mskp = id;
+ if (valp) *valp = id;
+ return 0;
+}
+
+static int ctrl_stdcur_get(struct pvr2_ctrl *cptr,int *vp)
+{
+ *vp = cptr->hdw->std_mask_cur;
+ return 0;
+}
+
+static int ctrl_stdcur_set(struct pvr2_ctrl *cptr,int m,int v)
+{
+ struct pvr2_hdw *hdw = cptr->hdw;
+ v4l2_std_id ns;
+ ns = hdw->std_mask_cur;
+ ns = (ns & ~m) | (v & m);
+ if (ns == hdw->std_mask_cur) return 0;
+ hdw->std_mask_cur = ns;
+ hdw->std_dirty = !0;
+ return 0;
+}
+
+static int ctrl_stdcur_is_dirty(struct pvr2_ctrl *cptr)
+{
+ return cptr->hdw->std_dirty != 0;
+}
+
+static void ctrl_stdcur_clear_dirty(struct pvr2_ctrl *cptr)
+{
+ cptr->hdw->std_dirty = 0;
+}
+
+static int ctrl_signal_get(struct pvr2_ctrl *cptr,int *vp)
+{
+ struct pvr2_hdw *hdw = cptr->hdw;
+ pvr2_hdw_status_poll(hdw);
+ *vp = hdw->tuner_signal_info.signal;
+ return 0;
+}
+
+static int ctrl_audio_modes_present_get(struct pvr2_ctrl *cptr,int *vp)
+{
+ int val = 0;
+ unsigned int subchan;
+ struct pvr2_hdw *hdw = cptr->hdw;
+ pvr2_hdw_status_poll(hdw);
+ subchan = hdw->tuner_signal_info.rxsubchans;
+ if (subchan & V4L2_TUNER_SUB_MONO) {
+ val |= (1 << V4L2_TUNER_MODE_MONO);
+ }
+ if (subchan & V4L2_TUNER_SUB_STEREO) {
+ val |= (1 << V4L2_TUNER_MODE_STEREO);
+ }
+ if (subchan & V4L2_TUNER_SUB_LANG1) {
+ val |= (1 << V4L2_TUNER_MODE_LANG1);
+ }
+ if (subchan & V4L2_TUNER_SUB_LANG2) {
+ val |= (1 << V4L2_TUNER_MODE_LANG2);
+ }
+ *vp = val;
+ return 0;
+}
+
+
+#define DEFINT(vmin,vmax) \
+ .type = pvr2_ctl_int, \
+ .def.type_int.min_value = vmin, \
+ .def.type_int.max_value = vmax
+
+#define DEFENUM(tab) \
+ .type = pvr2_ctl_enum, \
+ .def.type_enum.count = ARRAY_SIZE(tab), \
+ .def.type_enum.value_names = tab
+
+#define DEFBOOL \
+ .type = pvr2_ctl_bool
+
+#define DEFMASK(msk,tab) \
+ .type = pvr2_ctl_bitmask, \
+ .def.type_bitmask.valid_bits = msk, \
+ .def.type_bitmask.bit_names = tab
+
+#define DEFREF(vname) \
+ .set_value = ctrl_set_##vname, \
+ .get_value = ctrl_get_##vname, \
+ .is_dirty = ctrl_isdirty_##vname, \
+ .clear_dirty = ctrl_cleardirty_##vname
+
+
+#define VCREATE_FUNCS(vname) \
+static int ctrl_get_##vname(struct pvr2_ctrl *cptr,int *vp) \
+{*vp = cptr->hdw->vname##_val; return 0;} \
+static int ctrl_set_##vname(struct pvr2_ctrl *cptr,int m,int v) \
+{cptr->hdw->vname##_val = v; cptr->hdw->vname##_dirty = !0; return 0;} \
+static int ctrl_isdirty_##vname(struct pvr2_ctrl *cptr) \
+{return cptr->hdw->vname##_dirty != 0;} \
+static void ctrl_cleardirty_##vname(struct pvr2_ctrl *cptr) \
+{cptr->hdw->vname##_dirty = 0;}
+
+VCREATE_FUNCS(brightness)
+VCREATE_FUNCS(contrast)
+VCREATE_FUNCS(saturation)
+VCREATE_FUNCS(hue)
+VCREATE_FUNCS(volume)
+VCREATE_FUNCS(balance)
+VCREATE_FUNCS(bass)
+VCREATE_FUNCS(treble)
+VCREATE_FUNCS(mute)
+VCREATE_FUNCS(cropl)
+VCREATE_FUNCS(cropt)
+VCREATE_FUNCS(cropw)
+VCREATE_FUNCS(croph)
+VCREATE_FUNCS(audiomode)
+VCREATE_FUNCS(res_hor)
+VCREATE_FUNCS(res_ver)
+VCREATE_FUNCS(srate)
+
+/* Table definition of all controls which can be manipulated */
+static const struct pvr2_ctl_info control_defs[] = {
+ {
+ .v4l_id = V4L2_CID_BRIGHTNESS,
+ .desc = "Brightness",
+ .name = "brightness",
+ .default_value = 128,
+ DEFREF(brightness),
+ DEFINT(0,255),
+ },{
+ .v4l_id = V4L2_CID_CONTRAST,
+ .desc = "Contrast",
+ .name = "contrast",
+ .default_value = 68,
+ DEFREF(contrast),
+ DEFINT(0,127),
+ },{
+ .v4l_id = V4L2_CID_SATURATION,
+ .desc = "Saturation",
+ .name = "saturation",
+ .default_value = 64,
+ DEFREF(saturation),
+ DEFINT(0,127),
+ },{
+ .v4l_id = V4L2_CID_HUE,
+ .desc = "Hue",
+ .name = "hue",
+ .default_value = 0,
+ DEFREF(hue),
+ DEFINT(-128,127),
+ },{
+ .v4l_id = V4L2_CID_AUDIO_VOLUME,
+ .desc = "Volume",
+ .name = "volume",
+ .default_value = 62000,
+ DEFREF(volume),
+ DEFINT(0,65535),
+ },{
+ .v4l_id = V4L2_CID_AUDIO_BALANCE,
+ .desc = "Balance",
+ .name = "balance",
+ .default_value = 0,
+ DEFREF(balance),
+ DEFINT(-32768,32767),
+ },{
+ .v4l_id = V4L2_CID_AUDIO_BASS,
+ .desc = "Bass",
+ .name = "bass",
+ .default_value = 0,
+ DEFREF(bass),
+ DEFINT(-32768,32767),
+ },{
+ .v4l_id = V4L2_CID_AUDIO_TREBLE,
+ .desc = "Treble",
+ .name = "treble",
+ .default_value = 0,
+ DEFREF(treble),
+ DEFINT(-32768,32767),
+ },{
+ .v4l_id = V4L2_CID_AUDIO_MUTE,
+ .desc = "Mute",
+ .name = "mute",
+ .default_value = 0,
+ DEFREF(mute),
+ DEFBOOL,
+ }, {
+ .desc = "Capture crop left margin",
+ .name = "crop_left",
+ .internal_id = PVR2_CID_CROPL,
+ .default_value = 0,
+ DEFREF(cropl),
+ DEFINT(-129, 340),
+ .get_min_value = ctrl_cropl_min_get,
+ .get_max_value = ctrl_cropl_max_get,
+ .get_def_value = ctrl_get_cropcapdl,
+ }, {
+ .desc = "Capture crop top margin",
+ .name = "crop_top",
+ .internal_id = PVR2_CID_CROPT,
+ .default_value = 0,
+ DEFREF(cropt),
+ DEFINT(-35, 544),
+ .get_min_value = ctrl_cropt_min_get,
+ .get_max_value = ctrl_cropt_max_get,
+ .get_def_value = ctrl_get_cropcapdt,
+ }, {
+ .desc = "Capture crop width",
+ .name = "crop_width",
+ .internal_id = PVR2_CID_CROPW,
+ .default_value = 720,
+ DEFREF(cropw),
+ DEFINT(0, 864),
+ .get_max_value = ctrl_cropw_max_get,
+ .get_def_value = ctrl_get_cropcapdw,
+ }, {
+ .desc = "Capture crop height",
+ .name = "crop_height",
+ .internal_id = PVR2_CID_CROPH,
+ .default_value = 480,
+ DEFREF(croph),
+ DEFINT(0, 576),
+ .get_max_value = ctrl_croph_max_get,
+ .get_def_value = ctrl_get_cropcapdh,
+ }, {
+ .desc = "Capture capability pixel aspect numerator",
+ .name = "cropcap_pixel_numerator",
+ .internal_id = PVR2_CID_CROPCAPPAN,
+ .get_value = ctrl_get_cropcappan,
+ }, {
+ .desc = "Capture capability pixel aspect denominator",
+ .name = "cropcap_pixel_denominator",
+ .internal_id = PVR2_CID_CROPCAPPAD,
+ .get_value = ctrl_get_cropcappad,
+ }, {
+ .desc = "Capture capability bounds top",
+ .name = "cropcap_bounds_top",
+ .internal_id = PVR2_CID_CROPCAPBT,
+ .get_value = ctrl_get_cropcapbt,
+ }, {
+ .desc = "Capture capability bounds left",
+ .name = "cropcap_bounds_left",
+ .internal_id = PVR2_CID_CROPCAPBL,
+ .get_value = ctrl_get_cropcapbl,
+ }, {
+ .desc = "Capture capability bounds width",
+ .name = "cropcap_bounds_width",
+ .internal_id = PVR2_CID_CROPCAPBW,
+ .get_value = ctrl_get_cropcapbw,
+ }, {
+ .desc = "Capture capability bounds height",
+ .name = "cropcap_bounds_height",
+ .internal_id = PVR2_CID_CROPCAPBH,
+ .get_value = ctrl_get_cropcapbh,
+ },{
+ .desc = "Video Source",
+ .name = "input",
+ .internal_id = PVR2_CID_INPUT,
+ .default_value = PVR2_CVAL_INPUT_TV,
+ .check_value = ctrl_check_input,
+ DEFREF(input),
+ DEFENUM(control_values_input),
+ },{
+ .desc = "Audio Mode",
+ .name = "audio_mode",
+ .internal_id = PVR2_CID_AUDIOMODE,
+ .default_value = V4L2_TUNER_MODE_STEREO,
+ DEFREF(audiomode),
+ DEFENUM(control_values_audiomode),
+ },{
+ .desc = "Horizontal capture resolution",
+ .name = "resolution_hor",
+ .internal_id = PVR2_CID_HRES,
+ .default_value = 720,
+ DEFREF(res_hor),
+ DEFINT(19,720),
+ },{
+ .desc = "Vertical capture resolution",
+ .name = "resolution_ver",
+ .internal_id = PVR2_CID_VRES,
+ .default_value = 480,
+ DEFREF(res_ver),
+ DEFINT(17,576),
+ /* Hook in check for video standard and adjust maximum
+ depending on the standard. */
+ .get_max_value = ctrl_vres_max_get,
+ .get_min_value = ctrl_vres_min_get,
+ },{
+ .v4l_id = V4L2_CID_MPEG_AUDIO_SAMPLING_FREQ,
+ .default_value = V4L2_MPEG_AUDIO_SAMPLING_FREQ_48000,
+ .desc = "Audio Sampling Frequency",
+ .name = "srate",
+ DEFREF(srate),
+ DEFENUM(control_values_srate),
+ },{
+ .desc = "Tuner Frequency (Hz)",
+ .name = "frequency",
+ .internal_id = PVR2_CID_FREQUENCY,
+ .default_value = 0,
+ .set_value = ctrl_freq_set,
+ .get_value = ctrl_freq_get,
+ .is_dirty = ctrl_freq_is_dirty,
+ .clear_dirty = ctrl_freq_clear_dirty,
+ DEFINT(0,0),
+ /* Hook in check for input value (tv/radio) and adjust
+ max/min values accordingly */
+ .get_max_value = ctrl_freq_max_get,
+ .get_min_value = ctrl_freq_min_get,
+ },{
+ .desc = "Channel",
+ .name = "channel",
+ .set_value = ctrl_channel_set,
+ .get_value = ctrl_channel_get,
+ DEFINT(0,FREQTABLE_SIZE),
+ },{
+ .desc = "Channel Program Frequency",
+ .name = "freq_table_value",
+ .set_value = ctrl_channelfreq_set,
+ .get_value = ctrl_channelfreq_get,
+ DEFINT(0,0),
+ /* Hook in check for input value (tv/radio) and adjust
+ max/min values accordingly */
+ .get_max_value = ctrl_freq_max_get,
+ .get_min_value = ctrl_freq_min_get,
+ },{
+ .desc = "Channel Program ID",
+ .name = "freq_table_channel",
+ .set_value = ctrl_channelprog_set,
+ .get_value = ctrl_channelprog_get,
+ DEFINT(0,FREQTABLE_SIZE),
+ },{
+ .desc = "Streaming Enabled",
+ .name = "streaming_enabled",
+ .get_value = ctrl_streamingenabled_get,
+ DEFBOOL,
+ },{
+ .desc = "USB Speed",
+ .name = "usb_speed",
+ .get_value = ctrl_hsm_get,
+ DEFENUM(control_values_hsm),
+ },{
+ .desc = "Master State",
+ .name = "master_state",
+ .get_value = ctrl_masterstate_get,
+ DEFENUM(pvr2_state_names),
+ },{
+ .desc = "Signal Present",
+ .name = "signal_present",
+ .get_value = ctrl_signal_get,
+ DEFINT(0,65535),
+ },{
+ .desc = "Audio Modes Present",
+ .name = "audio_modes_present",
+ .get_value = ctrl_audio_modes_present_get,
+ /* For this type we "borrow" the V4L2_TUNER_MODE enum from
+ v4l. Nothing outside of this module cares about this,
+ but I reuse it in order to also reuse the
+ control_values_audiomode string table. */
+ DEFMASK(((1 << V4L2_TUNER_MODE_MONO)|
+ (1 << V4L2_TUNER_MODE_STEREO)|
+ (1 << V4L2_TUNER_MODE_LANG1)|
+ (1 << V4L2_TUNER_MODE_LANG2)),
+ control_values_audiomode),
+ },{
+ .desc = "Video Standards Available Mask",
+ .name = "video_standard_mask_available",
+ .internal_id = PVR2_CID_STDAVAIL,
+ .skip_init = !0,
+ .get_value = ctrl_stdavail_get,
+ .set_value = ctrl_stdavail_set,
+ .val_to_sym = ctrl_std_val_to_sym,
+ .sym_to_val = ctrl_std_sym_to_val,
+ .type = pvr2_ctl_bitmask,
+ },{
+ .desc = "Video Standards In Use Mask",
+ .name = "video_standard_mask_active",
+ .internal_id = PVR2_CID_STDCUR,
+ .skip_init = !0,
+ .get_value = ctrl_stdcur_get,
+ .set_value = ctrl_stdcur_set,
+ .is_dirty = ctrl_stdcur_is_dirty,
+ .clear_dirty = ctrl_stdcur_clear_dirty,
+ .val_to_sym = ctrl_std_val_to_sym,
+ .sym_to_val = ctrl_std_sym_to_val,
+ .type = pvr2_ctl_bitmask,
+ },{
+ .desc = "Video Standards Detected Mask",
+ .name = "video_standard_mask_detected",
+ .internal_id = PVR2_CID_STDDETECT,
+ .skip_init = !0,
+ .get_value = ctrl_stddetect_get,
+ .val_to_sym = ctrl_std_val_to_sym,
+ .sym_to_val = ctrl_std_sym_to_val,
+ .type = pvr2_ctl_bitmask,
+ }
+};
+
+#define CTRLDEF_COUNT ARRAY_SIZE(control_defs)
+
+
+const char *pvr2_config_get_name(enum pvr2_config cfg)
+{
+ switch (cfg) {
+ case pvr2_config_empty: return "empty";
+ case pvr2_config_mpeg: return "mpeg";
+ case pvr2_config_vbi: return "vbi";
+ case pvr2_config_pcm: return "pcm";
+ case pvr2_config_rawvideo: return "raw video";
+ }
+ return "<unknown>";
+}
+
+
+struct usb_device *pvr2_hdw_get_dev(struct pvr2_hdw *hdw)
+{
+ return hdw->usb_dev;
+}
+
+
+unsigned long pvr2_hdw_get_sn(struct pvr2_hdw *hdw)
+{
+ return hdw->serial_number;
+}
+
+
+const char *pvr2_hdw_get_bus_info(struct pvr2_hdw *hdw)
+{
+ return hdw->bus_info;
+}
+
+
+const char *pvr2_hdw_get_device_identifier(struct pvr2_hdw *hdw)
+{
+ return hdw->identifier;
+}
+
+
+unsigned long pvr2_hdw_get_cur_freq(struct pvr2_hdw *hdw)
+{
+ return hdw->freqSelector ? hdw->freqValTelevision : hdw->freqValRadio;
+}
+
+/* Set the currently tuned frequency and account for all possible
+ driver-core side effects of this action. */
+static void pvr2_hdw_set_cur_freq(struct pvr2_hdw *hdw,unsigned long val)
+{
+ if (hdw->input_val == PVR2_CVAL_INPUT_RADIO) {
+ if (hdw->freqSelector) {
+ /* Swing over to radio frequency selection */
+ hdw->freqSelector = 0;
+ hdw->freqDirty = !0;
+ }
+ if (hdw->freqValRadio != val) {
+ hdw->freqValRadio = val;
+ hdw->freqSlotRadio = 0;
+ hdw->freqDirty = !0;
+ }
+ } else {
+ if (!(hdw->freqSelector)) {
+ /* Swing over to television frequency selection */
+ hdw->freqSelector = 1;
+ hdw->freqDirty = !0;
+ }
+ if (hdw->freqValTelevision != val) {
+ hdw->freqValTelevision = val;
+ hdw->freqSlotTelevision = 0;
+ hdw->freqDirty = !0;
+ }
+ }
+}
+
+int pvr2_hdw_get_unit_number(struct pvr2_hdw *hdw)
+{
+ return hdw->unit_number;
+}
+
+
+/* Attempt to locate one of the given set of files. Messages are logged
+ appropriate to what has been found. The return value will be 0 or
+ greater on success (it will be the index of the file name found) and
+ fw_entry will be filled in. Otherwise a negative error is returned on
+ failure. If the return value is -ENOENT then no viable firmware file
+ could be located. */
+static int pvr2_locate_firmware(struct pvr2_hdw *hdw,
+ const struct firmware **fw_entry,
+ const char *fwtypename,
+ unsigned int fwcount,
+ const char *fwnames[])
+{
+ unsigned int idx;
+ int ret = -EINVAL;
+ for (idx = 0; idx < fwcount; idx++) {
+ ret = request_firmware(fw_entry,
+ fwnames[idx],
+ &hdw->usb_dev->dev);
+ if (!ret) {
+ trace_firmware("Located %s firmware: %s; uploading...",
+ fwtypename,
+ fwnames[idx]);
+ return idx;
+ }
+ if (ret == -ENOENT) continue;
+ pvr2_trace(PVR2_TRACE_ERROR_LEGS,
+ "request_firmware fatal error with code=%d",ret);
+ return ret;
+ }
+ pvr2_trace(PVR2_TRACE_ERROR_LEGS,
+ "***WARNING*** Device %s firmware seems to be missing.",
+ fwtypename);
+ pvr2_trace(PVR2_TRACE_ERROR_LEGS,
+ "Did you install the pvrusb2 firmware files in their proper location?");
+ if (fwcount == 1) {
+ pvr2_trace(PVR2_TRACE_ERROR_LEGS,
+ "request_firmware unable to locate %s file %s",
+ fwtypename,fwnames[0]);
+ } else {
+ pvr2_trace(PVR2_TRACE_ERROR_LEGS,
+ "request_firmware unable to locate one of the following %s files:",
+ fwtypename);
+ for (idx = 0; idx < fwcount; idx++) {
+ pvr2_trace(PVR2_TRACE_ERROR_LEGS,
+ "request_firmware: Failed to find %s",
+ fwnames[idx]);
+ }
+ }
+ return ret;
+}
+
+
+/*
+ * pvr2_upload_firmware1().
+ *
+ * Send the 8051 firmware to the device. After the upload, arrange for
+ * device to re-enumerate.
+ *
+ * NOTE : the pointer to the firmware data given by request_firmware()
+ * is not suitable for an usb transaction.
+ *
+ */
+static int pvr2_upload_firmware1(struct pvr2_hdw *hdw)
+{
+ const struct firmware *fw_entry = NULL;
+ void *fw_ptr;
+ unsigned int pipe;
+ unsigned int fwsize;
+ int ret;
+ u16 address;
+
+ if (!hdw->hdw_desc->fx2_firmware.cnt) {
+ hdw->fw1_state = FW1_STATE_OK;
+ pvr2_trace(PVR2_TRACE_ERROR_LEGS,
+ "Connected device type defines no firmware to upload; ignoring firmware");
+ return -ENOTTY;
+ }
+
+ hdw->fw1_state = FW1_STATE_FAILED; // default result
+
+ trace_firmware("pvr2_upload_firmware1");
+
+ ret = pvr2_locate_firmware(hdw,&fw_entry,"fx2 controller",
+ hdw->hdw_desc->fx2_firmware.cnt,
+ hdw->hdw_desc->fx2_firmware.lst);
+ if (ret < 0) {
+ if (ret == -ENOENT) hdw->fw1_state = FW1_STATE_MISSING;
+ return ret;
+ }
+
+ usb_clear_halt(hdw->usb_dev, usb_sndbulkpipe(hdw->usb_dev, 0 & 0x7f));
+
+ pipe = usb_sndctrlpipe(hdw->usb_dev, 0);
+ fwsize = fw_entry->size;
+
+ if ((fwsize != 0x2000) &&
+ (!(hdw->hdw_desc->flag_fx2_16kb && (fwsize == 0x4000)))) {
+ if (hdw->hdw_desc->flag_fx2_16kb) {
+ pvr2_trace(PVR2_TRACE_ERROR_LEGS,
+ "Wrong fx2 firmware size (expected 8192 or 16384, got %u)",
+ fwsize);
+ } else {
+ pvr2_trace(PVR2_TRACE_ERROR_LEGS,
+ "Wrong fx2 firmware size (expected 8192, got %u)",
+ fwsize);
+ }
+ release_firmware(fw_entry);
+ return -ENOMEM;
+ }
+
+ fw_ptr = kmalloc(0x800, GFP_KERNEL);
+ if (fw_ptr == NULL){
+ release_firmware(fw_entry);
+ return -ENOMEM;
+ }
+
+ /* We have to hold the CPU during firmware upload. */
+ pvr2_hdw_cpureset_assert(hdw,1);
+
+ /* upload the firmware to address 0000-1fff in 2048 (=0x800) bytes
+ chunk. */
+
+ ret = 0;
+ for (address = 0; address < fwsize; address += 0x800) {
+ memcpy(fw_ptr, fw_entry->data + address, 0x800);
+ ret += usb_control_msg(hdw->usb_dev, pipe, 0xa0, 0x40, address,
+ 0, fw_ptr, 0x800, 1000);
+ }
+
+ trace_firmware("Upload done, releasing device's CPU");
+
+ /* Now release the CPU. It will disconnect and reconnect later. */
+ pvr2_hdw_cpureset_assert(hdw,0);
+
+ kfree(fw_ptr);
+ release_firmware(fw_entry);
+
+ trace_firmware("Upload done (%d bytes sent)",ret);
+
+ /* We should have written fwsize bytes */
+ if (ret == fwsize) {
+ hdw->fw1_state = FW1_STATE_RELOAD;
+ return 0;
+ }
+
+ return -EIO;
+}
+
+
+/*
+ * pvr2_upload_firmware2()
+ *
+ * This uploads encoder firmware on endpoint 2.
+ *
+ */
+
+int pvr2_upload_firmware2(struct pvr2_hdw *hdw)
+{
+ const struct firmware *fw_entry = NULL;
+ void *fw_ptr;
+ unsigned int pipe, fw_len, fw_done, bcnt, icnt;
+ int actual_length;
+ int ret = 0;
+ int fwidx;
+ static const char *fw_files[] = {
+ CX2341X_FIRM_ENC_FILENAME,
+ };
+
+ if (hdw->hdw_desc->flag_skip_cx23416_firmware) {
+ return 0;
+ }
+
+ trace_firmware("pvr2_upload_firmware2");
+
+ ret = pvr2_locate_firmware(hdw,&fw_entry,"encoder",
+ ARRAY_SIZE(fw_files), fw_files);
+ if (ret < 0) return ret;
+ fwidx = ret;
+ ret = 0;
+ /* Since we're about to completely reinitialize the encoder,
+ invalidate our cached copy of its configuration state. Next
+ time we configure the encoder, then we'll fully configure it. */
+ hdw->enc_cur_valid = 0;
+
+ /* Encoder is about to be reset so note that as far as we're
+ concerned now, the encoder has never been run. */
+ del_timer_sync(&hdw->encoder_run_timer);
+ if (hdw->state_encoder_runok) {
+ hdw->state_encoder_runok = 0;
+ trace_stbit("state_encoder_runok",hdw->state_encoder_runok);
+ }
+
+ /* First prepare firmware loading */
+ ret |= pvr2_write_register(hdw, 0x0048, 0xffffffff); /*interrupt mask*/
+ ret |= pvr2_hdw_gpio_chg_dir(hdw,0xffffffff,0x00000088); /*gpio dir*/
+ ret |= pvr2_hdw_gpio_chg_out(hdw,0xffffffff,0x00000008); /*gpio output state*/
+ ret |= pvr2_hdw_cmd_deep_reset(hdw);
+ ret |= pvr2_write_register(hdw, 0xa064, 0x00000000); /*APU command*/
+ ret |= pvr2_hdw_gpio_chg_dir(hdw,0xffffffff,0x00000408); /*gpio dir*/
+ ret |= pvr2_hdw_gpio_chg_out(hdw,0xffffffff,0x00000008); /*gpio output state*/
+ ret |= pvr2_write_register(hdw, 0x9058, 0xffffffed); /*VPU ctrl*/
+ ret |= pvr2_write_register(hdw, 0x9054, 0xfffffffd); /*reset hw blocks*/
+ ret |= pvr2_write_register(hdw, 0x07f8, 0x80000800); /*encoder SDRAM refresh*/
+ ret |= pvr2_write_register(hdw, 0x07fc, 0x0000001a); /*encoder SDRAM pre-charge*/
+ ret |= pvr2_write_register(hdw, 0x0700, 0x00000000); /*I2C clock*/
+ ret |= pvr2_write_register(hdw, 0xaa00, 0x00000000); /*unknown*/
+ ret |= pvr2_write_register(hdw, 0xaa04, 0x00057810); /*unknown*/
+ ret |= pvr2_write_register(hdw, 0xaa10, 0x00148500); /*unknown*/
+ ret |= pvr2_write_register(hdw, 0xaa18, 0x00840000); /*unknown*/
+ ret |= pvr2_issue_simple_cmd(hdw,FX2CMD_FWPOST1);
+ ret |= pvr2_issue_simple_cmd(hdw,FX2CMD_MEMSEL | (1 << 8) | (0 << 16));
+
+ if (ret) {
+ pvr2_trace(PVR2_TRACE_ERROR_LEGS,
+ "firmware2 upload prep failed, ret=%d",ret);
+ release_firmware(fw_entry);
+ goto done;
+ }
+
+ /* Now send firmware */
+
+ fw_len = fw_entry->size;
+
+ if (fw_len % sizeof(u32)) {
+ pvr2_trace(PVR2_TRACE_ERROR_LEGS,
+ "size of %s firmware must be a multiple of %zu bytes",
+ fw_files[fwidx],sizeof(u32));
+ release_firmware(fw_entry);
+ ret = -EINVAL;
+ goto done;
+ }
+
+ fw_ptr = kmalloc(FIRMWARE_CHUNK_SIZE, GFP_KERNEL);
+ if (fw_ptr == NULL){
+ release_firmware(fw_entry);
+ pvr2_trace(PVR2_TRACE_ERROR_LEGS,
+ "failed to allocate memory for firmware2 upload");
+ ret = -ENOMEM;
+ goto done;
+ }
+
+ pipe = usb_sndbulkpipe(hdw->usb_dev, PVR2_FIRMWARE_ENDPOINT);
+
+ fw_done = 0;
+ for (fw_done = 0; fw_done < fw_len;) {
+ bcnt = fw_len - fw_done;
+ if (bcnt > FIRMWARE_CHUNK_SIZE) bcnt = FIRMWARE_CHUNK_SIZE;
+ memcpy(fw_ptr, fw_entry->data + fw_done, bcnt);
+ /* Usbsnoop log shows that we must swap bytes... */
+ /* Some background info: The data being swapped here is a
+ firmware image destined for the mpeg encoder chip that
+ lives at the other end of a USB endpoint. The encoder
+ chip always talks in 32 bit chunks and its storage is
+ organized into 32 bit words. However from the file
+ system to the encoder chip everything is purely a byte
+ stream. The firmware file's contents are always 32 bit
+ swapped from what the encoder expects. Thus the need
+ always exists to swap the bytes regardless of the endian
+ type of the host processor and therefore swab32() makes
+ the most sense. */
+ for (icnt = 0; icnt < bcnt/4 ; icnt++)
+ ((u32 *)fw_ptr)[icnt] = swab32(((u32 *)fw_ptr)[icnt]);
+
+ ret |= usb_bulk_msg(hdw->usb_dev, pipe, fw_ptr,bcnt,
+ &actual_length, 1000);
+ ret |= (actual_length != bcnt);
+ if (ret) break;
+ fw_done += bcnt;
+ }
+
+ trace_firmware("upload of %s : %i / %i ",
+ fw_files[fwidx],fw_done,fw_len);
+
+ kfree(fw_ptr);
+ release_firmware(fw_entry);
+
+ if (ret) {
+ pvr2_trace(PVR2_TRACE_ERROR_LEGS,
+ "firmware2 upload transfer failure");
+ goto done;
+ }
+
+ /* Finish upload */
+
+ ret |= pvr2_write_register(hdw, 0x9054, 0xffffffff); /*reset hw blocks*/
+ ret |= pvr2_write_register(hdw, 0x9058, 0xffffffe8); /*VPU ctrl*/
+ ret |= pvr2_issue_simple_cmd(hdw,FX2CMD_MEMSEL | (1 << 8) | (0 << 16));
+
+ if (ret) {
+ pvr2_trace(PVR2_TRACE_ERROR_LEGS,
+ "firmware2 upload post-proc failure");
+ }
+
+ done:
+ if (hdw->hdw_desc->signal_routing_scheme ==
+ PVR2_ROUTING_SCHEME_GOTVIEW) {
+ /* Ensure that GPIO 11 is set to output for GOTVIEW
+ hardware. */
+ pvr2_hdw_gpio_chg_dir(hdw,(1 << 11),~0);
+ }
+ return ret;
+}
+
+
+static const char *pvr2_get_state_name(unsigned int st)
+{
+ if (st < ARRAY_SIZE(pvr2_state_names)) {
+ return pvr2_state_names[st];
+ }
+ return "???";
+}
+
+static int pvr2_decoder_enable(struct pvr2_hdw *hdw,int enablefl)
+{
+ /* Even though we really only care about the video decoder chip at
+ this point, we'll broadcast stream on/off to all sub-devices
+ anyway, just in case somebody else wants to hear the
+ command... */
+ pvr2_trace(PVR2_TRACE_CHIPS, "subdev v4l2 stream=%s",
+ (enablefl ? "on" : "off"));
+ v4l2_device_call_all(&hdw->v4l2_dev, 0, video, s_stream, enablefl);
+ v4l2_device_call_all(&hdw->v4l2_dev, 0, audio, s_stream, enablefl);
+ if (hdw->decoder_client_id) {
+ /* We get here if the encoder has been noticed. Otherwise
+ we'll issue a warning to the user (which should
+ normally never happen). */
+ return 0;
+ }
+ if (!hdw->flag_decoder_missed) {
+ pvr2_trace(PVR2_TRACE_ERROR_LEGS,
+ "***WARNING*** No decoder present");
+ hdw->flag_decoder_missed = !0;
+ trace_stbit("flag_decoder_missed",
+ hdw->flag_decoder_missed);
+ }
+ return -EIO;
+}
+
+
+int pvr2_hdw_get_state(struct pvr2_hdw *hdw)
+{
+ return hdw->master_state;
+}
+
+
+static int pvr2_hdw_untrip_unlocked(struct pvr2_hdw *hdw)
+{
+ if (!hdw->flag_tripped) return 0;
+ hdw->flag_tripped = 0;
+ pvr2_trace(PVR2_TRACE_ERROR_LEGS,
+ "Clearing driver error status");
+ return !0;
+}
+
+
+int pvr2_hdw_untrip(struct pvr2_hdw *hdw)
+{
+ int fl;
+ LOCK_TAKE(hdw->big_lock); do {
+ fl = pvr2_hdw_untrip_unlocked(hdw);
+ } while (0); LOCK_GIVE(hdw->big_lock);
+ if (fl) pvr2_hdw_state_sched(hdw);
+ return 0;
+}
+
+
+
+
+int pvr2_hdw_get_streaming(struct pvr2_hdw *hdw)
+{
+ return hdw->state_pipeline_req != 0;
+}
+
+
+int pvr2_hdw_set_streaming(struct pvr2_hdw *hdw,int enable_flag)
+{
+ int ret,st;
+ LOCK_TAKE(hdw->big_lock);
+ pvr2_hdw_untrip_unlocked(hdw);
+ if (!enable_flag != !hdw->state_pipeline_req) {
+ hdw->state_pipeline_req = enable_flag != 0;
+ pvr2_trace(PVR2_TRACE_START_STOP,
+ "/*--TRACE_STREAM--*/ %s",
+ enable_flag ? "enable" : "disable");
+ }
+ pvr2_hdw_state_sched(hdw);
+ LOCK_GIVE(hdw->big_lock);
+ if ((ret = pvr2_hdw_wait(hdw,0)) < 0) return ret;
+ if (enable_flag) {
+ while ((st = hdw->master_state) != PVR2_STATE_RUN) {
+ if (st != PVR2_STATE_READY) return -EIO;
+ if ((ret = pvr2_hdw_wait(hdw,st)) < 0) return ret;
+ }
+ }
+ return 0;
+}
+
+
+int pvr2_hdw_set_stream_type(struct pvr2_hdw *hdw,enum pvr2_config config)
+{
+ int fl;
+ LOCK_TAKE(hdw->big_lock);
+ if ((fl = (hdw->desired_stream_type != config)) != 0) {
+ hdw->desired_stream_type = config;
+ hdw->state_pipeline_config = 0;
+ trace_stbit("state_pipeline_config",
+ hdw->state_pipeline_config);
+ pvr2_hdw_state_sched(hdw);
+ }
+ LOCK_GIVE(hdw->big_lock);
+ if (fl) return 0;
+ return pvr2_hdw_wait(hdw,0);
+}
+
+
+static int get_default_tuner_type(struct pvr2_hdw *hdw)
+{
+ int unit_number = hdw->unit_number;
+ int tp = -1;
+ if ((unit_number >= 0) && (unit_number < PVR_NUM)) {
+ tp = tuner[unit_number];
+ }
+ if (tp < 0) return -EINVAL;
+ hdw->tuner_type = tp;
+ hdw->tuner_updated = !0;
+ return 0;
+}
+
+
+static v4l2_std_id get_default_standard(struct pvr2_hdw *hdw)
+{
+ int unit_number = hdw->unit_number;
+ int tp = 0;
+ if ((unit_number >= 0) && (unit_number < PVR_NUM)) {
+ tp = video_std[unit_number];
+ if (tp) return tp;
+ }
+ return 0;
+}
+
+
+static unsigned int get_default_error_tolerance(struct pvr2_hdw *hdw)
+{
+ int unit_number = hdw->unit_number;
+ int tp = 0;
+ if ((unit_number >= 0) && (unit_number < PVR_NUM)) {
+ tp = tolerance[unit_number];
+ }
+ return tp;
+}
+
+
+static int pvr2_hdw_check_firmware(struct pvr2_hdw *hdw)
+{
+ /* Try a harmless request to fetch the eeprom's address over
+ endpoint 1. See what happens. Only the full FX2 image can
+ respond to this. If this probe fails then likely the FX2
+ firmware needs be loaded. */
+ int result;
+ LOCK_TAKE(hdw->ctl_lock); do {
+ hdw->cmd_buffer[0] = FX2CMD_GET_EEPROM_ADDR;
+ result = pvr2_send_request_ex(hdw,HZ*1,!0,
+ hdw->cmd_buffer,1,
+ hdw->cmd_buffer,1);
+ if (result < 0) break;
+ } while(0); LOCK_GIVE(hdw->ctl_lock);
+ if (result) {
+ pvr2_trace(PVR2_TRACE_INIT,
+ "Probe of device endpoint 1 result status %d",
+ result);
+ } else {
+ pvr2_trace(PVR2_TRACE_INIT,
+ "Probe of device endpoint 1 succeeded");
+ }
+ return result == 0;
+}
+
+struct pvr2_std_hack {
+ v4l2_std_id pat; /* Pattern to match */
+ v4l2_std_id msk; /* Which bits we care about */
+ v4l2_std_id std; /* What additional standards or default to set */
+};
+
+/* This data structure labels specific combinations of standards from
+ tveeprom that we'll try to recognize. If we recognize one, then assume
+ a specified default standard to use. This is here because tveeprom only
+ tells us about available standards not the intended default standard (if
+ any) for the device in question. We guess the default based on what has
+ been reported as available. Note that this is only for guessing a
+ default - which can always be overridden explicitly - and if the user
+ has otherwise named a default then that default will always be used in
+ place of this table. */
+static const struct pvr2_std_hack std_eeprom_maps[] = {
+ { /* PAL(B/G) */
+ .pat = V4L2_STD_B|V4L2_STD_GH,
+ .std = V4L2_STD_PAL_B|V4L2_STD_PAL_B1|V4L2_STD_PAL_G,
+ },
+ { /* NTSC(M) */
+ .pat = V4L2_STD_MN,
+ .std = V4L2_STD_NTSC_M,
+ },
+ { /* PAL(I) */
+ .pat = V4L2_STD_PAL_I,
+ .std = V4L2_STD_PAL_I,
+ },
+ { /* SECAM(L/L') */
+ .pat = V4L2_STD_SECAM_L|V4L2_STD_SECAM_LC,
+ .std = V4L2_STD_SECAM_L|V4L2_STD_SECAM_LC,
+ },
+ { /* PAL(D/D1/K) */
+ .pat = V4L2_STD_DK,
+ .std = V4L2_STD_PAL_D|V4L2_STD_PAL_D1|V4L2_STD_PAL_K,
+ },
+};
+
+static void pvr2_hdw_setup_std(struct pvr2_hdw *hdw)
+{
+ char buf[40];
+ unsigned int bcnt;
+ v4l2_std_id std1,std2,std3;
+
+ std1 = get_default_standard(hdw);
+ std3 = std1 ? 0 : hdw->hdw_desc->default_std_mask;
+
+ bcnt = pvr2_std_id_to_str(buf,sizeof(buf),hdw->std_mask_eeprom);
+ pvr2_trace(PVR2_TRACE_STD,
+ "Supported video standard(s) reported available in hardware: %.*s",
+ bcnt,buf);
+
+ hdw->std_mask_avail = hdw->std_mask_eeprom;
+
+ std2 = (std1|std3) & ~hdw->std_mask_avail;
+ if (std2) {
+ bcnt = pvr2_std_id_to_str(buf,sizeof(buf),std2);
+ pvr2_trace(PVR2_TRACE_STD,
+ "Expanding supported video standards to include: %.*s",
+ bcnt,buf);
+ hdw->std_mask_avail |= std2;
+ }
+
+ hdw->std_info_cur.def.type_bitmask.valid_bits = hdw->std_mask_avail;
+
+ if (std1) {
+ bcnt = pvr2_std_id_to_str(buf,sizeof(buf),std1);
+ pvr2_trace(PVR2_TRACE_STD,
+ "Initial video standard forced to %.*s",
+ bcnt,buf);
+ hdw->std_mask_cur = std1;
+ hdw->std_dirty = !0;
+ return;
+ }
+ if (std3) {
+ bcnt = pvr2_std_id_to_str(buf,sizeof(buf),std3);
+ pvr2_trace(PVR2_TRACE_STD,
+ "Initial video standard (determined by device type): %.*s",
+ bcnt, buf);
+ hdw->std_mask_cur = std3;
+ hdw->std_dirty = !0;
+ return;
+ }
+
+ {
+ unsigned int idx;
+ for (idx = 0; idx < ARRAY_SIZE(std_eeprom_maps); idx++) {
+ if (std_eeprom_maps[idx].msk ?
+ ((std_eeprom_maps[idx].pat ^
+ hdw->std_mask_eeprom) &
+ std_eeprom_maps[idx].msk) :
+ (std_eeprom_maps[idx].pat !=
+ hdw->std_mask_eeprom)) continue;
+ bcnt = pvr2_std_id_to_str(buf,sizeof(buf),
+ std_eeprom_maps[idx].std);
+ pvr2_trace(PVR2_TRACE_STD,
+ "Initial video standard guessed as %.*s",
+ bcnt,buf);
+ hdw->std_mask_cur = std_eeprom_maps[idx].std;
+ hdw->std_dirty = !0;
+ return;
+ }
+ }
+
+}
+
+
+static unsigned int pvr2_copy_i2c_addr_list(
+ unsigned short *dst, const unsigned char *src,
+ unsigned int dst_max)
+{
+ unsigned int cnt = 0;
+ if (!src) return 0;
+ while (src[cnt] && (cnt + 1) < dst_max) {
+ dst[cnt] = src[cnt];
+ cnt++;
+ }
+ dst[cnt] = I2C_CLIENT_END;
+ return cnt;
+}
+
+
+static void pvr2_hdw_cx25840_vbi_hack(struct pvr2_hdw *hdw)
+{
+ /*
+ Mike Isely <isely@pobox.com> 19-Nov-2006 - This bit of nuttiness
+ for cx25840 causes that module to correctly set up its video
+ scaling. This is really a problem in the cx25840 module itself,
+ but we work around it here. The problem has not been seen in
+ ivtv because there VBI is supported and set up. We don't do VBI
+ here (at least not yet) and thus we never attempted to even set
+ it up.
+ */
+ struct v4l2_format fmt;
+ if (hdw->decoder_client_id != PVR2_CLIENT_ID_CX25840) {
+ /* We're not using a cx25840 so don't enable the hack */
+ return;
+ }
+
+ pvr2_trace(PVR2_TRACE_INIT,
+ "Module ID %u: Executing cx25840 VBI hack",
+ hdw->decoder_client_id);
+ memset(&fmt, 0, sizeof(fmt));
+ fmt.type = V4L2_BUF_TYPE_SLICED_VBI_CAPTURE;
+ fmt.fmt.sliced.service_lines[0][21] = V4L2_SLICED_CAPTION_525;
+ fmt.fmt.sliced.service_lines[1][21] = V4L2_SLICED_CAPTION_525;
+ v4l2_device_call_all(&hdw->v4l2_dev, hdw->decoder_client_id,
+ vbi, s_sliced_fmt, &fmt.fmt.sliced);
+}
+
+
+static int pvr2_hdw_load_subdev(struct pvr2_hdw *hdw,
+ const struct pvr2_device_client_desc *cd)
+{
+ const char *fname;
+ unsigned char mid;
+ struct v4l2_subdev *sd;
+ unsigned int i2ccnt;
+ const unsigned char *p;
+ /* Arbitrary count - max # i2c addresses we will probe */
+ unsigned short i2caddr[25];
+
+ mid = cd->module_id;
+ fname = (mid < ARRAY_SIZE(module_names)) ? module_names[mid] : NULL;
+ if (!fname) {
+ pvr2_trace(PVR2_TRACE_ERROR_LEGS,
+ "Module ID %u for device %s has no name? The driver might have a configuration problem.",
+ mid,
+ hdw->hdw_desc->description);
+ return -EINVAL;
+ }
+ pvr2_trace(PVR2_TRACE_INIT,
+ "Module ID %u (%s) for device %s being loaded...",
+ mid, fname,
+ hdw->hdw_desc->description);
+
+ i2ccnt = pvr2_copy_i2c_addr_list(i2caddr, cd->i2c_address_list,
+ ARRAY_SIZE(i2caddr));
+ if (!i2ccnt && ((p = (mid < ARRAY_SIZE(module_i2c_addresses)) ?
+ module_i2c_addresses[mid] : NULL) != NULL)) {
+ /* Second chance: Try default i2c address list */
+ i2ccnt = pvr2_copy_i2c_addr_list(i2caddr, p,
+ ARRAY_SIZE(i2caddr));
+ if (i2ccnt) {
+ pvr2_trace(PVR2_TRACE_INIT,
+ "Module ID %u: Using default i2c address list",
+ mid);
+ }
+ }
+
+ if (!i2ccnt) {
+ pvr2_trace(PVR2_TRACE_ERROR_LEGS,
+ "Module ID %u (%s) for device %s: No i2c addresses. The driver might have a configuration problem.",
+ mid, fname, hdw->hdw_desc->description);
+ return -EINVAL;
+ }
+
+ if (i2ccnt == 1) {
+ pvr2_trace(PVR2_TRACE_INIT,
+ "Module ID %u: Setting up with specified i2c address 0x%x",
+ mid, i2caddr[0]);
+ sd = v4l2_i2c_new_subdev(&hdw->v4l2_dev, &hdw->i2c_adap,
+ fname, i2caddr[0], NULL);
+ } else {
+ pvr2_trace(PVR2_TRACE_INIT,
+ "Module ID %u: Setting up with address probe list",
+ mid);
+ sd = v4l2_i2c_new_subdev(&hdw->v4l2_dev, &hdw->i2c_adap,
+ fname, 0, i2caddr);
+ }
+
+ if (!sd) {
+ pvr2_trace(PVR2_TRACE_ERROR_LEGS,
+ "Module ID %u (%s) for device %s failed to load. Possible missing sub-device kernel module or initialization failure within module.",
+ mid, fname, hdw->hdw_desc->description);
+ return -EIO;
+ }
+
+ /* Tag this sub-device instance with the module ID we know about.
+ In other places we'll use that tag to determine if the instance
+ requires special handling. */
+ sd->grp_id = mid;
+
+ pvr2_trace(PVR2_TRACE_INFO, "Attached sub-driver %s", fname);
+
+
+ /* client-specific setup... */
+ switch (mid) {
+ case PVR2_CLIENT_ID_CX25840:
+ case PVR2_CLIENT_ID_SAA7115:
+ hdw->decoder_client_id = mid;
+ break;
+ default: break;
+ }
+
+ return 0;
+}
+
+
+static void pvr2_hdw_load_modules(struct pvr2_hdw *hdw)
+{
+ unsigned int idx;
+ const struct pvr2_string_table *cm;
+ const struct pvr2_device_client_table *ct;
+ int okFl = !0;
+
+ cm = &hdw->hdw_desc->client_modules;
+ for (idx = 0; idx < cm->cnt; idx++) {
+ request_module(cm->lst[idx]);
+ }
+
+ ct = &hdw->hdw_desc->client_table;
+ for (idx = 0; idx < ct->cnt; idx++) {
+ if (pvr2_hdw_load_subdev(hdw, &ct->lst[idx]) < 0) okFl = 0;
+ }
+ if (!okFl) {
+ hdw->flag_modulefail = !0;
+ pvr2_hdw_render_useless(hdw);
+ }
+}
+
+
+static void pvr2_hdw_setup_low(struct pvr2_hdw *hdw)
+{
+ int ret;
+ unsigned int idx;
+ struct pvr2_ctrl *cptr;
+ int reloadFl = 0;
+ if (hdw->hdw_desc->fx2_firmware.cnt) {
+ if (!reloadFl) {
+ reloadFl =
+ (hdw->usb_intf->cur_altsetting->desc.bNumEndpoints
+ == 0);
+ if (reloadFl) {
+ pvr2_trace(PVR2_TRACE_INIT,
+ "USB endpoint config looks strange; possibly firmware needs to be loaded");
+ }
+ }
+ if (!reloadFl) {
+ reloadFl = !pvr2_hdw_check_firmware(hdw);
+ if (reloadFl) {
+ pvr2_trace(PVR2_TRACE_INIT,
+ "Check for FX2 firmware failed; possibly firmware needs to be loaded");
+ }
+ }
+ if (reloadFl) {
+ if (pvr2_upload_firmware1(hdw) != 0) {
+ pvr2_trace(PVR2_TRACE_ERROR_LEGS,
+ "Failure uploading firmware1");
+ }
+ return;
+ }
+ }
+ hdw->fw1_state = FW1_STATE_OK;
+
+ if (!pvr2_hdw_dev_ok(hdw)) return;
+
+ hdw->force_dirty = !0;
+
+ if (!hdw->hdw_desc->flag_no_powerup) {
+ pvr2_hdw_cmd_powerup(hdw);
+ if (!pvr2_hdw_dev_ok(hdw)) return;
+ }
+
+ /* Take the IR chip out of reset, if appropriate */
+ if (hdw->ir_scheme_active == PVR2_IR_SCHEME_ZILOG) {
+ pvr2_issue_simple_cmd(hdw,
+ FX2CMD_HCW_ZILOG_RESET |
+ (1 << 8) |
+ ((0) << 16));
+ }
+
+ /* This step MUST happen after the earlier powerup step */
+ pvr2_i2c_core_init(hdw);
+ if (!pvr2_hdw_dev_ok(hdw)) return;
+
+ /* Reset demod only on Hauppauge 160xxx platform */
+ if (le16_to_cpu(hdw->usb_dev->descriptor.idVendor) == 0x2040 &&
+ (le16_to_cpu(hdw->usb_dev->descriptor.idProduct) == 0x7502 ||
+ le16_to_cpu(hdw->usb_dev->descriptor.idProduct) == 0x7510)) {
+ pr_info("%s(): resetting 160xxx demod\n", __func__);
+ /* TODO: not sure this is proper place to reset once only */
+ pvr2_issue_simple_cmd(hdw,
+ FX2CMD_HCW_DEMOD_RESET_PIN |
+ (1 << 8) |
+ ((0) << 16));
+ usleep_range(10000, 10500);
+ pvr2_issue_simple_cmd(hdw,
+ FX2CMD_HCW_DEMOD_RESET_PIN |
+ (1 << 8) |
+ ((1) << 16));
+ usleep_range(10000, 10500);
+ }
+
+ pvr2_hdw_load_modules(hdw);
+ if (!pvr2_hdw_dev_ok(hdw)) return;
+
+ v4l2_device_call_all(&hdw->v4l2_dev, 0, core, load_fw);
+
+ for (idx = 0; idx < CTRLDEF_COUNT; idx++) {
+ cptr = hdw->controls + idx;
+ if (cptr->info->skip_init) continue;
+ if (!cptr->info->set_value) continue;
+ cptr->info->set_value(cptr,~0,cptr->info->default_value);
+ }
+
+ pvr2_hdw_cx25840_vbi_hack(hdw);
+
+ /* Set up special default values for the television and radio
+ frequencies here. It's not really important what these defaults
+ are, but I set them to something usable in the Chicago area just
+ to make driver testing a little easier. */
+
+ hdw->freqValTelevision = default_tv_freq;
+ hdw->freqValRadio = default_radio_freq;
+
+ // Do not use pvr2_reset_ctl_endpoints() here. It is not
+ // thread-safe against the normal pvr2_send_request() mechanism.
+ // (We should make it thread safe).
+
+ if (hdw->hdw_desc->flag_has_hauppauge_rom) {
+ ret = pvr2_hdw_get_eeprom_addr(hdw);
+ if (!pvr2_hdw_dev_ok(hdw)) return;
+ if (ret < 0) {
+ pvr2_trace(PVR2_TRACE_ERROR_LEGS,
+ "Unable to determine location of eeprom, skipping");
+ } else {
+ hdw->eeprom_addr = ret;
+ pvr2_eeprom_analyze(hdw);
+ if (!pvr2_hdw_dev_ok(hdw)) return;
+ }
+ } else {
+ hdw->tuner_type = hdw->hdw_desc->default_tuner_type;
+ hdw->tuner_updated = !0;
+ hdw->std_mask_eeprom = V4L2_STD_ALL;
+ }
+
+ if (hdw->serial_number) {
+ idx = scnprintf(hdw->identifier, sizeof(hdw->identifier) - 1,
+ "sn-%lu", hdw->serial_number);
+ } else if (hdw->unit_number >= 0) {
+ idx = scnprintf(hdw->identifier, sizeof(hdw->identifier) - 1,
+ "unit-%c",
+ hdw->unit_number + 'a');
+ } else {
+ idx = scnprintf(hdw->identifier, sizeof(hdw->identifier) - 1,
+ "unit-??");
+ }
+ hdw->identifier[idx] = 0;
+
+ pvr2_hdw_setup_std(hdw);
+
+ if (!get_default_tuner_type(hdw)) {
+ pvr2_trace(PVR2_TRACE_INIT,
+ "pvr2_hdw_setup: Tuner type overridden to %d",
+ hdw->tuner_type);
+ }
+
+
+ if (!pvr2_hdw_dev_ok(hdw)) return;
+
+ if (hdw->hdw_desc->signal_routing_scheme ==
+ PVR2_ROUTING_SCHEME_GOTVIEW) {
+ /* Ensure that GPIO 11 is set to output for GOTVIEW
+ hardware. */
+ pvr2_hdw_gpio_chg_dir(hdw,(1 << 11),~0);
+ }
+
+ pvr2_hdw_commit_setup(hdw);
+
+ hdw->vid_stream = pvr2_stream_create();
+ if (!pvr2_hdw_dev_ok(hdw)) return;
+ pvr2_trace(PVR2_TRACE_INIT,
+ "pvr2_hdw_setup: video stream is %p",hdw->vid_stream);
+ if (hdw->vid_stream) {
+ idx = get_default_error_tolerance(hdw);
+ if (idx) {
+ pvr2_trace(PVR2_TRACE_INIT,
+ "pvr2_hdw_setup: video stream %p setting tolerance %u",
+ hdw->vid_stream,idx);
+ }
+ pvr2_stream_setup(hdw->vid_stream,hdw->usb_dev,
+ PVR2_VID_ENDPOINT,idx);
+ }
+
+ if (!pvr2_hdw_dev_ok(hdw)) return;
+
+ hdw->flag_init_ok = !0;
+
+ pvr2_hdw_state_sched(hdw);
+}
+
+
+/* Set up the structure and attempt to put the device into a usable state.
+ This can be a time-consuming operation, which is why it is not done
+ internally as part of the create() step. */
+static void pvr2_hdw_setup(struct pvr2_hdw *hdw)
+{
+ pvr2_trace(PVR2_TRACE_INIT,"pvr2_hdw_setup(hdw=%p) begin",hdw);
+ do {
+ pvr2_hdw_setup_low(hdw);
+ pvr2_trace(PVR2_TRACE_INIT,
+ "pvr2_hdw_setup(hdw=%p) done, ok=%d init_ok=%d",
+ hdw,pvr2_hdw_dev_ok(hdw),hdw->flag_init_ok);
+ if (pvr2_hdw_dev_ok(hdw)) {
+ if (hdw->flag_init_ok) {
+ pvr2_trace(
+ PVR2_TRACE_INFO,
+ "Device initialization completed successfully.");
+ break;
+ }
+ if (hdw->fw1_state == FW1_STATE_RELOAD) {
+ pvr2_trace(
+ PVR2_TRACE_INFO,
+ "Device microcontroller firmware (re)loaded; it should now reset and reconnect.");
+ break;
+ }
+ pvr2_trace(
+ PVR2_TRACE_ERROR_LEGS,
+ "Device initialization was not successful.");
+ if (hdw->fw1_state == FW1_STATE_MISSING) {
+ pvr2_trace(
+ PVR2_TRACE_ERROR_LEGS,
+ "Giving up since device microcontroller firmware appears to be missing.");
+ break;
+ }
+ }
+ if (hdw->flag_modulefail) {
+ pvr2_trace(
+ PVR2_TRACE_ERROR_LEGS,
+ "***WARNING*** pvrusb2 driver initialization failed due to the failure of one or more sub-device kernel modules.");
+ pvr2_trace(
+ PVR2_TRACE_ERROR_LEGS,
+ "You need to resolve the failing condition before this driver can function. There should be some earlier messages giving more information about the problem.");
+ break;
+ }
+ if (procreload) {
+ pvr2_trace(
+ PVR2_TRACE_ERROR_LEGS,
+ "Attempting pvrusb2 recovery by reloading primary firmware.");
+ pvr2_trace(
+ PVR2_TRACE_ERROR_LEGS,
+ "If this works, device should disconnect and reconnect in a sane state.");
+ hdw->fw1_state = FW1_STATE_UNKNOWN;
+ pvr2_upload_firmware1(hdw);
+ } else {
+ pvr2_trace(
+ PVR2_TRACE_ERROR_LEGS,
+ "***WARNING*** pvrusb2 device hardware appears to be jammed and I can't clear it.");
+ pvr2_trace(
+ PVR2_TRACE_ERROR_LEGS,
+ "You might need to power cycle the pvrusb2 device in order to recover.");
+ }
+ } while (0);
+ pvr2_trace(PVR2_TRACE_INIT,"pvr2_hdw_setup(hdw=%p) end",hdw);
+}
+
+
+/* Perform second stage initialization. Set callback pointer first so that
+ we can avoid a possible initialization race (if the kernel thread runs
+ before the callback has been set). */
+int pvr2_hdw_initialize(struct pvr2_hdw *hdw,
+ void (*callback_func)(void *),
+ void *callback_data)
+{
+ LOCK_TAKE(hdw->big_lock); do {
+ if (hdw->flag_disconnected) {
+ /* Handle a race here: If we're already
+ disconnected by this point, then give up. If we
+ get past this then we'll remain connected for
+ the duration of initialization since the entire
+ initialization sequence is now protected by the
+ big_lock. */
+ break;
+ }
+ hdw->state_data = callback_data;
+ hdw->state_func = callback_func;
+ pvr2_hdw_setup(hdw);
+ } while (0); LOCK_GIVE(hdw->big_lock);
+ return hdw->flag_init_ok;
+}
+
+
+/* Create, set up, and return a structure for interacting with the
+ underlying hardware. */
+struct pvr2_hdw *pvr2_hdw_create(struct usb_interface *intf,
+ const struct usb_device_id *devid)
+{
+ unsigned int idx,cnt1,cnt2,m;
+ struct pvr2_hdw *hdw = NULL;
+ int valid_std_mask;
+ struct pvr2_ctrl *cptr;
+ struct usb_device *usb_dev;
+ const struct pvr2_device_desc *hdw_desc;
+ __u8 ifnum;
+ struct v4l2_queryctrl qctrl;
+ struct pvr2_ctl_info *ciptr;
+
+ usb_dev = interface_to_usbdev(intf);
+
+ hdw_desc = (const struct pvr2_device_desc *)(devid->driver_info);
+
+ if (hdw_desc == NULL) {
+ pvr2_trace(PVR2_TRACE_INIT, "pvr2_hdw_create: No device description pointer, unable to continue.");
+ pvr2_trace(PVR2_TRACE_INIT,
+ "If you have a new device type, please contact Mike Isely <isely@pobox.com> to get it included in the driver");
+ goto fail;
+ }
+
+ hdw = kzalloc(sizeof(*hdw),GFP_KERNEL);
+ pvr2_trace(PVR2_TRACE_INIT,"pvr2_hdw_create: hdw=%p, type \"%s\"",
+ hdw,hdw_desc->description);
+ pvr2_trace(PVR2_TRACE_INFO, "Hardware description: %s",
+ hdw_desc->description);
+ if (hdw_desc->flag_is_experimental) {
+ pvr2_trace(PVR2_TRACE_INFO, "**********");
+ pvr2_trace(PVR2_TRACE_INFO,
+ "***WARNING*** Support for this device (%s) is experimental.",
+ hdw_desc->description);
+ pvr2_trace(PVR2_TRACE_INFO,
+ "Important functionality might not be entirely working.");
+ pvr2_trace(PVR2_TRACE_INFO,
+ "Please consider contacting the driver author to help with further stabilization of the driver.");
+ pvr2_trace(PVR2_TRACE_INFO, "**********");
+ }
+ if (!hdw) goto fail;
+
+ timer_setup(&hdw->quiescent_timer, pvr2_hdw_quiescent_timeout, 0);
+
+ timer_setup(&hdw->decoder_stabilization_timer,
+ pvr2_hdw_decoder_stabilization_timeout, 0);
+
+ timer_setup(&hdw->encoder_wait_timer, pvr2_hdw_encoder_wait_timeout,
+ 0);
+
+ timer_setup(&hdw->encoder_run_timer, pvr2_hdw_encoder_run_timeout, 0);
+
+ hdw->master_state = PVR2_STATE_DEAD;
+
+ init_waitqueue_head(&hdw->state_wait_data);
+
+ hdw->tuner_signal_stale = !0;
+ cx2341x_fill_defaults(&hdw->enc_ctl_state);
+
+ /* Calculate which inputs are OK */
+ m = 0;
+ if (hdw_desc->flag_has_analogtuner) m |= 1 << PVR2_CVAL_INPUT_TV;
+ if (hdw_desc->digital_control_scheme != PVR2_DIGITAL_SCHEME_NONE) {
+ m |= 1 << PVR2_CVAL_INPUT_DTV;
+ }
+ if (hdw_desc->flag_has_svideo) m |= 1 << PVR2_CVAL_INPUT_SVIDEO;
+ if (hdw_desc->flag_has_composite) m |= 1 << PVR2_CVAL_INPUT_COMPOSITE;
+ if (hdw_desc->flag_has_fmradio) m |= 1 << PVR2_CVAL_INPUT_RADIO;
+ hdw->input_avail_mask = m;
+ hdw->input_allowed_mask = hdw->input_avail_mask;
+
+ /* If not a hybrid device, pathway_state never changes. So
+ initialize it here to what it should forever be. */
+ if (!(hdw->input_avail_mask & (1 << PVR2_CVAL_INPUT_DTV))) {
+ hdw->pathway_state = PVR2_PATHWAY_ANALOG;
+ } else if (!(hdw->input_avail_mask & (1 << PVR2_CVAL_INPUT_TV))) {
+ hdw->pathway_state = PVR2_PATHWAY_DIGITAL;
+ }
+
+ hdw->control_cnt = CTRLDEF_COUNT;
+ hdw->control_cnt += MPEGDEF_COUNT;
+ hdw->controls = kcalloc(hdw->control_cnt, sizeof(struct pvr2_ctrl),
+ GFP_KERNEL);
+ if (!hdw->controls) goto fail;
+ hdw->hdw_desc = hdw_desc;
+ hdw->ir_scheme_active = hdw->hdw_desc->ir_scheme;
+ for (idx = 0; idx < hdw->control_cnt; idx++) {
+ cptr = hdw->controls + idx;
+ cptr->hdw = hdw;
+ }
+ for (idx = 0; idx < 32; idx++) {
+ hdw->std_mask_ptrs[idx] = hdw->std_mask_names[idx];
+ }
+ for (idx = 0; idx < CTRLDEF_COUNT; idx++) {
+ cptr = hdw->controls + idx;
+ cptr->info = control_defs+idx;
+ }
+
+ /* Ensure that default input choice is a valid one. */
+ m = hdw->input_avail_mask;
+ if (m) for (idx = 0; idx < (sizeof(m) << 3); idx++) {
+ if (!((1UL << idx) & m)) continue;
+ hdw->input_val = idx;
+ break;
+ }
+
+ /* Define and configure additional controls from cx2341x module. */
+ hdw->mpeg_ctrl_info = kcalloc(MPEGDEF_COUNT,
+ sizeof(*(hdw->mpeg_ctrl_info)),
+ GFP_KERNEL);
+ if (!hdw->mpeg_ctrl_info) goto fail;
+ for (idx = 0; idx < MPEGDEF_COUNT; idx++) {
+ cptr = hdw->controls + idx + CTRLDEF_COUNT;
+ ciptr = &(hdw->mpeg_ctrl_info[idx].info);
+ ciptr->desc = hdw->mpeg_ctrl_info[idx].desc;
+ ciptr->name = mpeg_ids[idx].strid;
+ ciptr->v4l_id = mpeg_ids[idx].id;
+ ciptr->skip_init = !0;
+ ciptr->get_value = ctrl_cx2341x_get;
+ ciptr->get_v4lflags = ctrl_cx2341x_getv4lflags;
+ ciptr->is_dirty = ctrl_cx2341x_is_dirty;
+ if (!idx) ciptr->clear_dirty = ctrl_cx2341x_clear_dirty;
+ qctrl.id = ciptr->v4l_id;
+ cx2341x_ctrl_query(&hdw->enc_ctl_state,&qctrl);
+ if (!(qctrl.flags & V4L2_CTRL_FLAG_READ_ONLY)) {
+ ciptr->set_value = ctrl_cx2341x_set;
+ }
+ strscpy(hdw->mpeg_ctrl_info[idx].desc, qctrl.name,
+ sizeof(hdw->mpeg_ctrl_info[idx].desc));
+ ciptr->default_value = qctrl.default_value;
+ switch (qctrl.type) {
+ default:
+ case V4L2_CTRL_TYPE_INTEGER:
+ ciptr->type = pvr2_ctl_int;
+ ciptr->def.type_int.min_value = qctrl.minimum;
+ ciptr->def.type_int.max_value = qctrl.maximum;
+ break;
+ case V4L2_CTRL_TYPE_BOOLEAN:
+ ciptr->type = pvr2_ctl_bool;
+ break;
+ case V4L2_CTRL_TYPE_MENU:
+ ciptr->type = pvr2_ctl_enum;
+ ciptr->def.type_enum.value_names =
+ cx2341x_ctrl_get_menu(&hdw->enc_ctl_state,
+ ciptr->v4l_id);
+ for (cnt1 = 0;
+ ciptr->def.type_enum.value_names[cnt1] != NULL;
+ cnt1++) { }
+ ciptr->def.type_enum.count = cnt1;
+ break;
+ }
+ cptr->info = ciptr;
+ }
+
+ // Initialize control data regarding video standard masks
+ valid_std_mask = pvr2_std_get_usable();
+ for (idx = 0; idx < 32; idx++) {
+ if (!(valid_std_mask & (1UL << idx))) continue;
+ cnt1 = pvr2_std_id_to_str(
+ hdw->std_mask_names[idx],
+ sizeof(hdw->std_mask_names[idx])-1,
+ 1UL << idx);
+ hdw->std_mask_names[idx][cnt1] = 0;
+ }
+ cptr = pvr2_hdw_get_ctrl_by_id(hdw,PVR2_CID_STDAVAIL);
+ if (cptr) {
+ memcpy(&hdw->std_info_avail,cptr->info,
+ sizeof(hdw->std_info_avail));
+ cptr->info = &hdw->std_info_avail;
+ hdw->std_info_avail.def.type_bitmask.bit_names =
+ hdw->std_mask_ptrs;
+ hdw->std_info_avail.def.type_bitmask.valid_bits =
+ valid_std_mask;
+ }
+ cptr = pvr2_hdw_get_ctrl_by_id(hdw,PVR2_CID_STDCUR);
+ if (cptr) {
+ memcpy(&hdw->std_info_cur,cptr->info,
+ sizeof(hdw->std_info_cur));
+ cptr->info = &hdw->std_info_cur;
+ hdw->std_info_cur.def.type_bitmask.bit_names =
+ hdw->std_mask_ptrs;
+ hdw->std_info_cur.def.type_bitmask.valid_bits =
+ valid_std_mask;
+ }
+ cptr = pvr2_hdw_get_ctrl_by_id(hdw,PVR2_CID_STDDETECT);
+ if (cptr) {
+ memcpy(&hdw->std_info_detect,cptr->info,
+ sizeof(hdw->std_info_detect));
+ cptr->info = &hdw->std_info_detect;
+ hdw->std_info_detect.def.type_bitmask.bit_names =
+ hdw->std_mask_ptrs;
+ hdw->std_info_detect.def.type_bitmask.valid_bits =
+ valid_std_mask;
+ }
+
+ hdw->cropcap_stale = !0;
+ hdw->eeprom_addr = -1;
+ hdw->unit_number = -1;
+ hdw->v4l_minor_number_video = -1;
+ hdw->v4l_minor_number_vbi = -1;
+ hdw->v4l_minor_number_radio = -1;
+ hdw->ctl_write_buffer = kmalloc(PVR2_CTL_BUFFSIZE,GFP_KERNEL);
+ if (!hdw->ctl_write_buffer) goto fail;
+ hdw->ctl_read_buffer = kmalloc(PVR2_CTL_BUFFSIZE,GFP_KERNEL);
+ if (!hdw->ctl_read_buffer) goto fail;
+ hdw->ctl_write_urb = usb_alloc_urb(0,GFP_KERNEL);
+ if (!hdw->ctl_write_urb) goto fail;
+ hdw->ctl_read_urb = usb_alloc_urb(0,GFP_KERNEL);
+ if (!hdw->ctl_read_urb) goto fail;
+
+ if (v4l2_device_register(&intf->dev, &hdw->v4l2_dev) != 0) {
+ pvr2_trace(PVR2_TRACE_ERROR_LEGS,
+ "Error registering with v4l core, giving up");
+ goto fail;
+ }
+ mutex_lock(&pvr2_unit_mtx);
+ do {
+ for (idx = 0; idx < PVR_NUM; idx++) {
+ if (unit_pointers[idx]) continue;
+ hdw->unit_number = idx;
+ unit_pointers[idx] = hdw;
+ break;
+ }
+ } while (0);
+ mutex_unlock(&pvr2_unit_mtx);
+
+ INIT_WORK(&hdw->workpoll, pvr2_hdw_worker_poll);
+
+ if (hdw->unit_number == -1)
+ goto fail;
+
+ cnt1 = 0;
+ cnt2 = scnprintf(hdw->name+cnt1,sizeof(hdw->name)-cnt1,"pvrusb2");
+ cnt1 += cnt2;
+ if (hdw->unit_number >= 0) {
+ cnt2 = scnprintf(hdw->name+cnt1,sizeof(hdw->name)-cnt1,"_%c",
+ ('a' + hdw->unit_number));
+ cnt1 += cnt2;
+ }
+ if (cnt1 >= sizeof(hdw->name)) cnt1 = sizeof(hdw->name)-1;
+ hdw->name[cnt1] = 0;
+
+ pvr2_trace(PVR2_TRACE_INIT,"Driver unit number is %d, name is %s",
+ hdw->unit_number,hdw->name);
+
+ hdw->tuner_type = -1;
+ hdw->flag_ok = !0;
+
+ hdw->usb_intf = intf;
+ hdw->usb_dev = usb_dev;
+
+ usb_make_path(hdw->usb_dev, hdw->bus_info, sizeof(hdw->bus_info));
+
+ ifnum = hdw->usb_intf->cur_altsetting->desc.bInterfaceNumber;
+ usb_set_interface(hdw->usb_dev,ifnum,0);
+
+ mutex_init(&hdw->ctl_lock_mutex);
+ mutex_init(&hdw->big_lock_mutex);
+
+ return hdw;
+ fail:
+ if (hdw) {
+ timer_shutdown_sync(&hdw->quiescent_timer);
+ timer_shutdown_sync(&hdw->decoder_stabilization_timer);
+ timer_shutdown_sync(&hdw->encoder_run_timer);
+ timer_shutdown_sync(&hdw->encoder_wait_timer);
+ flush_work(&hdw->workpoll);
+ v4l2_device_unregister(&hdw->v4l2_dev);
+ usb_free_urb(hdw->ctl_read_urb);
+ usb_free_urb(hdw->ctl_write_urb);
+ kfree(hdw->ctl_read_buffer);
+ kfree(hdw->ctl_write_buffer);
+ kfree(hdw->controls);
+ kfree(hdw->mpeg_ctrl_info);
+ kfree(hdw);
+ }
+ return NULL;
+}
+
+
+/* Remove _all_ associations between this driver and the underlying USB
+ layer. */
+static void pvr2_hdw_remove_usb_stuff(struct pvr2_hdw *hdw)
+{
+ if (hdw->flag_disconnected) return;
+ pvr2_trace(PVR2_TRACE_INIT,"pvr2_hdw_remove_usb_stuff: hdw=%p",hdw);
+ if (hdw->ctl_read_urb) {
+ usb_kill_urb(hdw->ctl_read_urb);
+ usb_free_urb(hdw->ctl_read_urb);
+ hdw->ctl_read_urb = NULL;
+ }
+ if (hdw->ctl_write_urb) {
+ usb_kill_urb(hdw->ctl_write_urb);
+ usb_free_urb(hdw->ctl_write_urb);
+ hdw->ctl_write_urb = NULL;
+ }
+ if (hdw->ctl_read_buffer) {
+ kfree(hdw->ctl_read_buffer);
+ hdw->ctl_read_buffer = NULL;
+ }
+ if (hdw->ctl_write_buffer) {
+ kfree(hdw->ctl_write_buffer);
+ hdw->ctl_write_buffer = NULL;
+ }
+ hdw->flag_disconnected = !0;
+ /* If we don't do this, then there will be a dangling struct device
+ reference to our disappearing device persisting inside the V4L
+ core... */
+ v4l2_device_disconnect(&hdw->v4l2_dev);
+ hdw->usb_dev = NULL;
+ hdw->usb_intf = NULL;
+ pvr2_hdw_render_useless(hdw);
+}
+
+void pvr2_hdw_set_v4l2_dev(struct pvr2_hdw *hdw, struct video_device *vdev)
+{
+ vdev->v4l2_dev = &hdw->v4l2_dev;
+}
+
+/* Destroy hardware interaction structure */
+void pvr2_hdw_destroy(struct pvr2_hdw *hdw)
+{
+ if (!hdw) return;
+ pvr2_trace(PVR2_TRACE_INIT,"pvr2_hdw_destroy: hdw=%p",hdw);
+ flush_work(&hdw->workpoll);
+ timer_shutdown_sync(&hdw->quiescent_timer);
+ timer_shutdown_sync(&hdw->decoder_stabilization_timer);
+ timer_shutdown_sync(&hdw->encoder_run_timer);
+ timer_shutdown_sync(&hdw->encoder_wait_timer);
+ if (hdw->fw_buffer) {
+ kfree(hdw->fw_buffer);
+ hdw->fw_buffer = NULL;
+ }
+ if (hdw->vid_stream) {
+ pvr2_stream_destroy(hdw->vid_stream);
+ hdw->vid_stream = NULL;
+ }
+ v4l2_device_unregister(&hdw->v4l2_dev);
+ pvr2_hdw_disconnect(hdw);
+ mutex_lock(&pvr2_unit_mtx);
+ do {
+ if ((hdw->unit_number >= 0) &&
+ (hdw->unit_number < PVR_NUM) &&
+ (unit_pointers[hdw->unit_number] == hdw)) {
+ unit_pointers[hdw->unit_number] = NULL;
+ }
+ } while (0);
+ mutex_unlock(&pvr2_unit_mtx);
+ kfree(hdw->controls);
+ kfree(hdw->mpeg_ctrl_info);
+ kfree(hdw);
+}
+
+
+int pvr2_hdw_dev_ok(struct pvr2_hdw *hdw)
+{
+ return (hdw && hdw->flag_ok);
+}
+
+
+/* Called when hardware has been unplugged */
+void pvr2_hdw_disconnect(struct pvr2_hdw *hdw)
+{
+ pvr2_trace(PVR2_TRACE_INIT,"pvr2_hdw_disconnect(hdw=%p)",hdw);
+ LOCK_TAKE(hdw->big_lock);
+ pvr2_i2c_core_done(hdw);
+ LOCK_TAKE(hdw->ctl_lock);
+ pvr2_hdw_remove_usb_stuff(hdw);
+ LOCK_GIVE(hdw->ctl_lock);
+ LOCK_GIVE(hdw->big_lock);
+}
+
+
+/* Get the number of defined controls */
+unsigned int pvr2_hdw_get_ctrl_count(struct pvr2_hdw *hdw)
+{
+ return hdw->control_cnt;
+}
+
+
+/* Retrieve a control handle given its index (0..count-1) */
+struct pvr2_ctrl *pvr2_hdw_get_ctrl_by_index(struct pvr2_hdw *hdw,
+ unsigned int idx)
+{
+ if (idx >= hdw->control_cnt) return NULL;
+ return hdw->controls + idx;
+}
+
+
+/* Retrieve a control handle given its index (0..count-1) */
+struct pvr2_ctrl *pvr2_hdw_get_ctrl_by_id(struct pvr2_hdw *hdw,
+ unsigned int ctl_id)
+{
+ struct pvr2_ctrl *cptr;
+ unsigned int idx;
+ int i;
+
+ /* This could be made a lot more efficient, but for now... */
+ for (idx = 0; idx < hdw->control_cnt; idx++) {
+ cptr = hdw->controls + idx;
+ i = cptr->info->internal_id;
+ if (i && (i == ctl_id)) return cptr;
+ }
+ return NULL;
+}
+
+
+/* Given a V4L ID, retrieve the control structure associated with it. */
+struct pvr2_ctrl *pvr2_hdw_get_ctrl_v4l(struct pvr2_hdw *hdw,unsigned int ctl_id)
+{
+ struct pvr2_ctrl *cptr;
+ unsigned int idx;
+ int i;
+
+ /* This could be made a lot more efficient, but for now... */
+ for (idx = 0; idx < hdw->control_cnt; idx++) {
+ cptr = hdw->controls + idx;
+ i = cptr->info->v4l_id;
+ if (i && (i == ctl_id)) return cptr;
+ }
+ return NULL;
+}
+
+
+/* Given a V4L ID for its immediate predecessor, retrieve the control
+ structure associated with it. */
+struct pvr2_ctrl *pvr2_hdw_get_ctrl_nextv4l(struct pvr2_hdw *hdw,
+ unsigned int ctl_id)
+{
+ struct pvr2_ctrl *cptr,*cp2;
+ unsigned int idx;
+ int i;
+
+ /* This could be made a lot more efficient, but for now... */
+ cp2 = NULL;
+ for (idx = 0; idx < hdw->control_cnt; idx++) {
+ cptr = hdw->controls + idx;
+ i = cptr->info->v4l_id;
+ if (!i) continue;
+ if (i <= ctl_id) continue;
+ if (cp2 && (cp2->info->v4l_id < i)) continue;
+ cp2 = cptr;
+ }
+ return cp2;
+ return NULL;
+}
+
+
+static const char *get_ctrl_typename(enum pvr2_ctl_type tp)
+{
+ switch (tp) {
+ case pvr2_ctl_int: return "integer";
+ case pvr2_ctl_enum: return "enum";
+ case pvr2_ctl_bool: return "boolean";
+ case pvr2_ctl_bitmask: return "bitmask";
+ }
+ return "";
+}
+
+
+static void pvr2_subdev_set_control(struct pvr2_hdw *hdw, int id,
+ const char *name, int val)
+{
+ struct v4l2_control ctrl;
+ struct v4l2_subdev *sd;
+
+ pvr2_trace(PVR2_TRACE_CHIPS, "subdev v4l2 %s=%d", name, val);
+ memset(&ctrl, 0, sizeof(ctrl));
+ ctrl.id = id;
+ ctrl.value = val;
+
+ v4l2_device_for_each_subdev(sd, &hdw->v4l2_dev)
+ v4l2_s_ctrl(NULL, sd->ctrl_handler, &ctrl);
+}
+
+#define PVR2_SUBDEV_SET_CONTROL(hdw, id, lab) \
+ if ((hdw)->lab##_dirty || (hdw)->force_dirty) { \
+ pvr2_subdev_set_control(hdw, id, #lab, (hdw)->lab##_val); \
+ }
+
+static v4l2_std_id pvr2_hdw_get_detected_std(struct pvr2_hdw *hdw)
+{
+ v4l2_std_id std;
+ std = (v4l2_std_id)hdw->std_mask_avail;
+ v4l2_device_call_all(&hdw->v4l2_dev, 0,
+ video, querystd, &std);
+ return std;
+}
+
+/* Execute whatever commands are required to update the state of all the
+ sub-devices so that they match our current control values. */
+static void pvr2_subdev_update(struct pvr2_hdw *hdw)
+{
+ struct v4l2_subdev *sd;
+ unsigned int id;
+ pvr2_subdev_update_func fp;
+
+ pvr2_trace(PVR2_TRACE_CHIPS, "subdev update...");
+
+ if (hdw->tuner_updated || hdw->force_dirty) {
+ struct tuner_setup setup;
+ pvr2_trace(PVR2_TRACE_CHIPS, "subdev tuner set_type(%d)",
+ hdw->tuner_type);
+ if (((int)(hdw->tuner_type)) >= 0) {
+ memset(&setup, 0, sizeof(setup));
+ setup.addr = ADDR_UNSET;
+ setup.type = hdw->tuner_type;
+ setup.mode_mask = T_RADIO | T_ANALOG_TV;
+ v4l2_device_call_all(&hdw->v4l2_dev, 0,
+ tuner, s_type_addr, &setup);
+ }
+ }
+
+ if (hdw->input_dirty || hdw->std_dirty || hdw->force_dirty) {
+ pvr2_trace(PVR2_TRACE_CHIPS, "subdev v4l2 set_standard");
+ if (hdw->input_val == PVR2_CVAL_INPUT_RADIO) {
+ v4l2_device_call_all(&hdw->v4l2_dev, 0,
+ tuner, s_radio);
+ } else {
+ v4l2_std_id vs;
+ vs = hdw->std_mask_cur;
+ v4l2_device_call_all(&hdw->v4l2_dev, 0,
+ video, s_std, vs);
+ pvr2_hdw_cx25840_vbi_hack(hdw);
+ }
+ hdw->tuner_signal_stale = !0;
+ hdw->cropcap_stale = !0;
+ }
+
+ PVR2_SUBDEV_SET_CONTROL(hdw, V4L2_CID_BRIGHTNESS, brightness);
+ PVR2_SUBDEV_SET_CONTROL(hdw, V4L2_CID_CONTRAST, contrast);
+ PVR2_SUBDEV_SET_CONTROL(hdw, V4L2_CID_SATURATION, saturation);
+ PVR2_SUBDEV_SET_CONTROL(hdw, V4L2_CID_HUE, hue);
+ PVR2_SUBDEV_SET_CONTROL(hdw, V4L2_CID_AUDIO_MUTE, mute);
+ PVR2_SUBDEV_SET_CONTROL(hdw, V4L2_CID_AUDIO_VOLUME, volume);
+ PVR2_SUBDEV_SET_CONTROL(hdw, V4L2_CID_AUDIO_BALANCE, balance);
+ PVR2_SUBDEV_SET_CONTROL(hdw, V4L2_CID_AUDIO_BASS, bass);
+ PVR2_SUBDEV_SET_CONTROL(hdw, V4L2_CID_AUDIO_TREBLE, treble);
+
+ if (hdw->input_dirty || hdw->audiomode_dirty || hdw->force_dirty) {
+ struct v4l2_tuner vt;
+ memset(&vt, 0, sizeof(vt));
+ vt.type = (hdw->input_val == PVR2_CVAL_INPUT_RADIO) ?
+ V4L2_TUNER_RADIO : V4L2_TUNER_ANALOG_TV;
+ vt.audmode = hdw->audiomode_val;
+ v4l2_device_call_all(&hdw->v4l2_dev, 0, tuner, s_tuner, &vt);
+ }
+
+ if (hdw->freqDirty || hdw->force_dirty) {
+ unsigned long fv;
+ struct v4l2_frequency freq;
+ fv = pvr2_hdw_get_cur_freq(hdw);
+ pvr2_trace(PVR2_TRACE_CHIPS, "subdev v4l2 set_freq(%lu)", fv);
+ if (hdw->tuner_signal_stale) pvr2_hdw_status_poll(hdw);
+ memset(&freq, 0, sizeof(freq));
+ if (hdw->tuner_signal_info.capability & V4L2_TUNER_CAP_LOW) {
+ /* ((fv * 1000) / 62500) */
+ freq.frequency = (fv * 2) / 125;
+ } else {
+ freq.frequency = fv / 62500;
+ }
+ /* tuner-core currently doesn't seem to care about this, but
+ let's set it anyway for completeness. */
+ if (hdw->input_val == PVR2_CVAL_INPUT_RADIO) {
+ freq.type = V4L2_TUNER_RADIO;
+ } else {
+ freq.type = V4L2_TUNER_ANALOG_TV;
+ }
+ freq.tuner = 0;
+ v4l2_device_call_all(&hdw->v4l2_dev, 0, tuner,
+ s_frequency, &freq);
+ }
+
+ if (hdw->res_hor_dirty || hdw->res_ver_dirty || hdw->force_dirty) {
+ struct v4l2_subdev_format format = {
+ .which = V4L2_SUBDEV_FORMAT_ACTIVE,
+ };
+
+ format.format.width = hdw->res_hor_val;
+ format.format.height = hdw->res_ver_val;
+ format.format.code = MEDIA_BUS_FMT_FIXED;
+ pvr2_trace(PVR2_TRACE_CHIPS, "subdev v4l2 set_size(%dx%d)",
+ format.format.width, format.format.height);
+ v4l2_device_call_all(&hdw->v4l2_dev, 0, pad, set_fmt,
+ NULL, &format);
+ }
+
+ if (hdw->srate_dirty || hdw->force_dirty) {
+ u32 val;
+ pvr2_trace(PVR2_TRACE_CHIPS, "subdev v4l2 set_audio %d",
+ hdw->srate_val);
+ switch (hdw->srate_val) {
+ default:
+ case V4L2_MPEG_AUDIO_SAMPLING_FREQ_48000:
+ val = 48000;
+ break;
+ case V4L2_MPEG_AUDIO_SAMPLING_FREQ_44100:
+ val = 44100;
+ break;
+ case V4L2_MPEG_AUDIO_SAMPLING_FREQ_32000:
+ val = 32000;
+ break;
+ }
+ v4l2_device_call_all(&hdw->v4l2_dev, 0,
+ audio, s_clock_freq, val);
+ }
+
+ /* Unable to set crop parameters; there is apparently no equivalent
+ for VIDIOC_S_CROP */
+
+ v4l2_device_for_each_subdev(sd, &hdw->v4l2_dev) {
+ id = sd->grp_id;
+ if (id >= ARRAY_SIZE(pvr2_module_update_functions)) continue;
+ fp = pvr2_module_update_functions[id];
+ if (!fp) continue;
+ (*fp)(hdw, sd);
+ }
+
+ if (hdw->tuner_signal_stale || hdw->cropcap_stale) {
+ pvr2_hdw_status_poll(hdw);
+ }
+}
+
+
+/* Figure out if we need to commit control changes. If so, mark internal
+ state flags to indicate this fact and return true. Otherwise do nothing
+ else and return false. */
+static int pvr2_hdw_commit_setup(struct pvr2_hdw *hdw)
+{
+ unsigned int idx;
+ struct pvr2_ctrl *cptr;
+ int value;
+ int commit_flag = hdw->force_dirty;
+ char buf[100];
+ unsigned int bcnt,ccnt;
+
+ for (idx = 0; idx < hdw->control_cnt; idx++) {
+ cptr = hdw->controls + idx;
+ if (!cptr->info->is_dirty) continue;
+ if (!cptr->info->is_dirty(cptr)) continue;
+ commit_flag = !0;
+
+ if (!(pvrusb2_debug & PVR2_TRACE_CTL)) continue;
+ bcnt = scnprintf(buf,sizeof(buf),"\"%s\" <-- ",
+ cptr->info->name);
+ value = 0;
+ cptr->info->get_value(cptr,&value);
+ pvr2_ctrl_value_to_sym_internal(cptr,~0,value,
+ buf+bcnt,
+ sizeof(buf)-bcnt,&ccnt);
+ bcnt += ccnt;
+ bcnt += scnprintf(buf+bcnt,sizeof(buf)-bcnt," <%s>",
+ get_ctrl_typename(cptr->info->type));
+ pvr2_trace(PVR2_TRACE_CTL,
+ "/*--TRACE_COMMIT--*/ %.*s",
+ bcnt,buf);
+ }
+
+ if (!commit_flag) {
+ /* Nothing has changed */
+ return 0;
+ }
+
+ hdw->state_pipeline_config = 0;
+ trace_stbit("state_pipeline_config",hdw->state_pipeline_config);
+ pvr2_hdw_state_sched(hdw);
+
+ return !0;
+}
+
+
+/* Perform all operations needed to commit all control changes. This must
+ be performed in synchronization with the pipeline state and is thus
+ expected to be called as part of the driver's worker thread. Return
+ true if commit successful, otherwise return false to indicate that
+ commit isn't possible at this time. */
+static int pvr2_hdw_commit_execute(struct pvr2_hdw *hdw)
+{
+ unsigned int idx;
+ struct pvr2_ctrl *cptr;
+ int disruptive_change;
+
+ if (hdw->input_dirty && hdw->state_pathway_ok &&
+ (((hdw->input_val == PVR2_CVAL_INPUT_DTV) ?
+ PVR2_PATHWAY_DIGITAL : PVR2_PATHWAY_ANALOG) !=
+ hdw->pathway_state)) {
+ /* Change of mode being asked for... */
+ hdw->state_pathway_ok = 0;
+ trace_stbit("state_pathway_ok", hdw->state_pathway_ok);
+ }
+ if (!hdw->state_pathway_ok) {
+ /* Can't commit anything until pathway is ok. */
+ return 0;
+ }
+
+ /* Handle some required side effects when the video standard is
+ changed.... */
+ if (hdw->std_dirty) {
+ int nvres;
+ int gop_size;
+ if (hdw->std_mask_cur & V4L2_STD_525_60) {
+ nvres = 480;
+ gop_size = 15;
+ } else {
+ nvres = 576;
+ gop_size = 12;
+ }
+ /* Rewrite the vertical resolution to be appropriate to the
+ video standard that has been selected. */
+ if (nvres != hdw->res_ver_val) {
+ hdw->res_ver_val = nvres;
+ hdw->res_ver_dirty = !0;
+ }
+ /* Rewrite the GOP size to be appropriate to the video
+ standard that has been selected. */
+ if (gop_size != hdw->enc_ctl_state.video_gop_size) {
+ struct v4l2_ext_controls cs;
+ struct v4l2_ext_control c1;
+ memset(&cs, 0, sizeof(cs));
+ memset(&c1, 0, sizeof(c1));
+ cs.controls = &c1;
+ cs.count = 1;
+ c1.id = V4L2_CID_MPEG_VIDEO_GOP_SIZE;
+ c1.value = gop_size;
+ cx2341x_ext_ctrls(&hdw->enc_ctl_state, 0, &cs,
+ VIDIOC_S_EXT_CTRLS);
+ }
+ }
+
+ /* The broadcast decoder can only scale down, so if
+ * res_*_dirty && crop window < output format ==> enlarge crop.
+ *
+ * The mpeg encoder receives fields of res_hor_val dots and
+ * res_ver_val halflines. Limits: hor<=720, ver<=576.
+ */
+ if (hdw->res_hor_dirty && hdw->cropw_val < hdw->res_hor_val) {
+ hdw->cropw_val = hdw->res_hor_val;
+ hdw->cropw_dirty = !0;
+ } else if (hdw->cropw_dirty) {
+ hdw->res_hor_dirty = !0; /* must rescale */
+ hdw->res_hor_val = min(720, hdw->cropw_val);
+ }
+ if (hdw->res_ver_dirty && hdw->croph_val < hdw->res_ver_val) {
+ hdw->croph_val = hdw->res_ver_val;
+ hdw->croph_dirty = !0;
+ } else if (hdw->croph_dirty) {
+ int nvres = hdw->std_mask_cur & V4L2_STD_525_60 ? 480 : 576;
+ hdw->res_ver_dirty = !0;
+ hdw->res_ver_val = min(nvres, hdw->croph_val);
+ }
+
+ /* If any of the below has changed, then we can't do the update
+ while the pipeline is running. Pipeline must be paused first
+ and decoder -> encoder connection be made quiescent before we
+ can proceed. */
+ disruptive_change =
+ (hdw->std_dirty ||
+ hdw->enc_unsafe_stale ||
+ hdw->srate_dirty ||
+ hdw->res_ver_dirty ||
+ hdw->res_hor_dirty ||
+ hdw->cropw_dirty ||
+ hdw->croph_dirty ||
+ hdw->input_dirty ||
+ (hdw->active_stream_type != hdw->desired_stream_type));
+ if (disruptive_change && !hdw->state_pipeline_idle) {
+ /* Pipeline is not idle; we can't proceed. Arrange to
+ cause pipeline to stop so that we can try this again
+ later.... */
+ hdw->state_pipeline_pause = !0;
+ return 0;
+ }
+
+ if (hdw->srate_dirty) {
+ /* Write new sample rate into control structure since
+ * the master copy is stale. We must track srate
+ * separate from the mpeg control structure because
+ * other logic also uses this value. */
+ struct v4l2_ext_controls cs;
+ struct v4l2_ext_control c1;
+ memset(&cs,0,sizeof(cs));
+ memset(&c1,0,sizeof(c1));
+ cs.controls = &c1;
+ cs.count = 1;
+ c1.id = V4L2_CID_MPEG_AUDIO_SAMPLING_FREQ;
+ c1.value = hdw->srate_val;
+ cx2341x_ext_ctrls(&hdw->enc_ctl_state, 0, &cs,VIDIOC_S_EXT_CTRLS);
+ }
+
+ if (hdw->active_stream_type != hdw->desired_stream_type) {
+ /* Handle any side effects of stream config here */
+ hdw->active_stream_type = hdw->desired_stream_type;
+ }
+
+ if (hdw->hdw_desc->signal_routing_scheme ==
+ PVR2_ROUTING_SCHEME_GOTVIEW) {
+ u32 b;
+ /* Handle GOTVIEW audio switching */
+ pvr2_hdw_gpio_get_out(hdw,&b);
+ if (hdw->input_val == PVR2_CVAL_INPUT_RADIO) {
+ /* Set GPIO 11 */
+ pvr2_hdw_gpio_chg_out(hdw,(1 << 11),~0);
+ } else {
+ /* Clear GPIO 11 */
+ pvr2_hdw_gpio_chg_out(hdw,(1 << 11),0);
+ }
+ }
+
+ /* Check and update state for all sub-devices. */
+ pvr2_subdev_update(hdw);
+
+ hdw->tuner_updated = 0;
+ hdw->force_dirty = 0;
+ for (idx = 0; idx < hdw->control_cnt; idx++) {
+ cptr = hdw->controls + idx;
+ if (!cptr->info->clear_dirty) continue;
+ cptr->info->clear_dirty(cptr);
+ }
+
+ if ((hdw->pathway_state == PVR2_PATHWAY_ANALOG) &&
+ hdw->state_encoder_run) {
+ /* If encoder isn't running or it can't be touched, then
+ this will get worked out later when we start the
+ encoder. */
+ if (pvr2_encoder_adjust(hdw) < 0) return !0;
+ }
+
+ hdw->state_pipeline_config = !0;
+ /* Hardware state may have changed in a way to cause the cropping
+ capabilities to have changed. So mark it stale, which will
+ cause a later re-fetch. */
+ trace_stbit("state_pipeline_config",hdw->state_pipeline_config);
+ return !0;
+}
+
+
+int pvr2_hdw_commit_ctl(struct pvr2_hdw *hdw)
+{
+ int fl;
+ LOCK_TAKE(hdw->big_lock);
+ fl = pvr2_hdw_commit_setup(hdw);
+ LOCK_GIVE(hdw->big_lock);
+ if (!fl) return 0;
+ return pvr2_hdw_wait(hdw,0);
+}
+
+
+static void pvr2_hdw_worker_poll(struct work_struct *work)
+{
+ int fl = 0;
+ struct pvr2_hdw *hdw = container_of(work,struct pvr2_hdw,workpoll);
+ LOCK_TAKE(hdw->big_lock); do {
+ fl = pvr2_hdw_state_eval(hdw);
+ } while (0); LOCK_GIVE(hdw->big_lock);
+ if (fl && hdw->state_func) {
+ hdw->state_func(hdw->state_data);
+ }
+}
+
+
+static int pvr2_hdw_wait(struct pvr2_hdw *hdw,int state)
+{
+ return wait_event_interruptible(
+ hdw->state_wait_data,
+ (hdw->state_stale == 0) &&
+ (!state || (hdw->master_state != state)));
+}
+
+
+/* Return name for this driver instance */
+const char *pvr2_hdw_get_driver_name(struct pvr2_hdw *hdw)
+{
+ return hdw->name;
+}
+
+
+const char *pvr2_hdw_get_desc(struct pvr2_hdw *hdw)
+{
+ return hdw->hdw_desc->description;
+}
+
+
+const char *pvr2_hdw_get_type(struct pvr2_hdw *hdw)
+{
+ return hdw->hdw_desc->shortname;
+}
+
+
+int pvr2_hdw_is_hsm(struct pvr2_hdw *hdw)
+{
+ int result;
+ LOCK_TAKE(hdw->ctl_lock); do {
+ hdw->cmd_buffer[0] = FX2CMD_GET_USB_SPEED;
+ result = pvr2_send_request(hdw,
+ hdw->cmd_buffer,1,
+ hdw->cmd_buffer,1);
+ if (result < 0) break;
+ result = (hdw->cmd_buffer[0] != 0);
+ } while(0); LOCK_GIVE(hdw->ctl_lock);
+ return result;
+}
+
+
+/* Execute poll of tuner status */
+void pvr2_hdw_execute_tuner_poll(struct pvr2_hdw *hdw)
+{
+ LOCK_TAKE(hdw->big_lock); do {
+ pvr2_hdw_status_poll(hdw);
+ } while (0); LOCK_GIVE(hdw->big_lock);
+}
+
+
+static int pvr2_hdw_check_cropcap(struct pvr2_hdw *hdw)
+{
+ if (!hdw->cropcap_stale) {
+ return 0;
+ }
+ pvr2_hdw_status_poll(hdw);
+ if (hdw->cropcap_stale) {
+ return -EIO;
+ }
+ return 0;
+}
+
+
+/* Return information about cropping capabilities */
+int pvr2_hdw_get_cropcap(struct pvr2_hdw *hdw, struct v4l2_cropcap *pp)
+{
+ int stat = 0;
+ LOCK_TAKE(hdw->big_lock);
+ stat = pvr2_hdw_check_cropcap(hdw);
+ if (!stat) {
+ memcpy(pp, &hdw->cropcap_info, sizeof(hdw->cropcap_info));
+ }
+ LOCK_GIVE(hdw->big_lock);
+ return stat;
+}
+
+
+/* Return information about the tuner */
+int pvr2_hdw_get_tuner_status(struct pvr2_hdw *hdw,struct v4l2_tuner *vtp)
+{
+ LOCK_TAKE(hdw->big_lock);
+ do {
+ if (hdw->tuner_signal_stale) {
+ pvr2_hdw_status_poll(hdw);
+ }
+ memcpy(vtp,&hdw->tuner_signal_info,sizeof(struct v4l2_tuner));
+ } while (0);
+ LOCK_GIVE(hdw->big_lock);
+ return 0;
+}
+
+
+/* Get handle to video output stream */
+struct pvr2_stream *pvr2_hdw_get_video_stream(struct pvr2_hdw *hp)
+{
+ return hp->vid_stream;
+}
+
+
+void pvr2_hdw_trigger_module_log(struct pvr2_hdw *hdw)
+{
+ int nr = pvr2_hdw_get_unit_number(hdw);
+ LOCK_TAKE(hdw->big_lock);
+ do {
+ pr_info("pvrusb2: ================= START STATUS CARD #%d =================\n", nr);
+ v4l2_device_call_all(&hdw->v4l2_dev, 0, core, log_status);
+ pvr2_trace(PVR2_TRACE_INFO,"cx2341x config:");
+ cx2341x_log_status(&hdw->enc_ctl_state, "pvrusb2");
+ pvr2_hdw_state_log_state(hdw);
+ pr_info("pvrusb2: ================== END STATUS CARD #%d ==================\n", nr);
+ } while (0);
+ LOCK_GIVE(hdw->big_lock);
+}
+
+
+/* Grab EEPROM contents, needed for direct method. */
+#define EEPROM_SIZE 8192
+#define trace_eeprom(...) pvr2_trace(PVR2_TRACE_EEPROM,__VA_ARGS__)
+static u8 *pvr2_full_eeprom_fetch(struct pvr2_hdw *hdw)
+{
+ struct i2c_msg msg[2];
+ u8 *eeprom;
+ u8 iadd[2];
+ u8 addr;
+ u16 eepromSize;
+ unsigned int offs;
+ int ret;
+ int mode16 = 0;
+ unsigned pcnt,tcnt;
+ eeprom = kzalloc(EEPROM_SIZE, GFP_KERNEL);
+ if (!eeprom) {
+ pvr2_trace(PVR2_TRACE_ERROR_LEGS,
+ "Failed to allocate memory required to read eeprom");
+ return NULL;
+ }
+
+ trace_eeprom("Value for eeprom addr from controller was 0x%x",
+ hdw->eeprom_addr);
+ addr = hdw->eeprom_addr;
+ /* Seems that if the high bit is set, then the *real* eeprom
+ address is shifted right now bit position (noticed this in
+ newer PVR USB2 hardware) */
+ if (addr & 0x80) addr >>= 1;
+
+ /* FX2 documentation states that a 16bit-addressed eeprom is
+ expected if the I2C address is an odd number (yeah, this is
+ strange but it's what they do) */
+ mode16 = (addr & 1);
+ eepromSize = (mode16 ? EEPROM_SIZE : 256);
+ trace_eeprom("Examining %d byte eeprom at location 0x%x using %d bit addressing",
+ eepromSize, addr,
+ mode16 ? 16 : 8);
+
+ msg[0].addr = addr;
+ msg[0].flags = 0;
+ msg[0].len = mode16 ? 2 : 1;
+ msg[0].buf = iadd;
+ msg[1].addr = addr;
+ msg[1].flags = I2C_M_RD;
+
+ /* We have to do the actual eeprom data fetch ourselves, because
+ (1) we're only fetching part of the eeprom, and (2) if we were
+ getting the whole thing our I2C driver can't grab it in one
+ pass - which is what tveeprom is otherwise going to attempt */
+ for (tcnt = 0; tcnt < EEPROM_SIZE; tcnt += pcnt) {
+ pcnt = 16;
+ if (pcnt + tcnt > EEPROM_SIZE) pcnt = EEPROM_SIZE-tcnt;
+ offs = tcnt + (eepromSize - EEPROM_SIZE);
+ if (mode16) {
+ iadd[0] = offs >> 8;
+ iadd[1] = offs;
+ } else {
+ iadd[0] = offs;
+ }
+ msg[1].len = pcnt;
+ msg[1].buf = eeprom+tcnt;
+ if ((ret = i2c_transfer(&hdw->i2c_adap,
+ msg,ARRAY_SIZE(msg))) != 2) {
+ pvr2_trace(PVR2_TRACE_ERROR_LEGS,
+ "eeprom fetch set offs err=%d",ret);
+ kfree(eeprom);
+ return NULL;
+ }
+ }
+ return eeprom;
+}
+
+
+void pvr2_hdw_cpufw_set_enabled(struct pvr2_hdw *hdw,
+ int mode,
+ int enable_flag)
+{
+ int ret;
+ u16 address;
+ unsigned int pipe;
+ LOCK_TAKE(hdw->big_lock);
+ do {
+ if ((hdw->fw_buffer == NULL) == !enable_flag) break;
+
+ if (!enable_flag) {
+ pvr2_trace(PVR2_TRACE_FIRMWARE,
+ "Cleaning up after CPU firmware fetch");
+ kfree(hdw->fw_buffer);
+ hdw->fw_buffer = NULL;
+ hdw->fw_size = 0;
+ if (hdw->fw_cpu_flag) {
+ /* Now release the CPU. It will disconnect
+ and reconnect later. */
+ pvr2_hdw_cpureset_assert(hdw,0);
+ }
+ break;
+ }
+
+ hdw->fw_cpu_flag = (mode != 2);
+ if (hdw->fw_cpu_flag) {
+ hdw->fw_size = (mode == 1) ? 0x4000 : 0x2000;
+ pvr2_trace(PVR2_TRACE_FIRMWARE,
+ "Preparing to suck out CPU firmware (size=%u)",
+ hdw->fw_size);
+ hdw->fw_buffer = kzalloc(hdw->fw_size,GFP_KERNEL);
+ if (!hdw->fw_buffer) {
+ hdw->fw_size = 0;
+ break;
+ }
+
+ /* We have to hold the CPU during firmware upload. */
+ pvr2_hdw_cpureset_assert(hdw,1);
+
+ /* download the firmware from address 0000-1fff in 2048
+ (=0x800) bytes chunk. */
+
+ pvr2_trace(PVR2_TRACE_FIRMWARE,
+ "Grabbing CPU firmware");
+ pipe = usb_rcvctrlpipe(hdw->usb_dev, 0);
+ for(address = 0; address < hdw->fw_size;
+ address += 0x800) {
+ ret = usb_control_msg(hdw->usb_dev,pipe,
+ 0xa0,0xc0,
+ address,0,
+ hdw->fw_buffer+address,
+ 0x800,1000);
+ if (ret < 0) break;
+ }
+
+ pvr2_trace(PVR2_TRACE_FIRMWARE,
+ "Done grabbing CPU firmware");
+ } else {
+ pvr2_trace(PVR2_TRACE_FIRMWARE,
+ "Sucking down EEPROM contents");
+ hdw->fw_buffer = pvr2_full_eeprom_fetch(hdw);
+ if (!hdw->fw_buffer) {
+ pvr2_trace(PVR2_TRACE_FIRMWARE,
+ "EEPROM content suck failed.");
+ break;
+ }
+ hdw->fw_size = EEPROM_SIZE;
+ pvr2_trace(PVR2_TRACE_FIRMWARE,
+ "Done sucking down EEPROM contents");
+ }
+ } while (0);
+ LOCK_GIVE(hdw->big_lock);
+}
+
+
+/* Return true if we're in a mode for retrieval CPU firmware */
+int pvr2_hdw_cpufw_get_enabled(struct pvr2_hdw *hdw)
+{
+ return hdw->fw_buffer != NULL;
+}
+
+
+int pvr2_hdw_cpufw_get(struct pvr2_hdw *hdw,unsigned int offs,
+ char *buf,unsigned int cnt)
+{
+ int ret = -EINVAL;
+ LOCK_TAKE(hdw->big_lock);
+ do {
+ if (!buf) break;
+ if (!cnt) break;
+
+ if (!hdw->fw_buffer) {
+ ret = -EIO;
+ break;
+ }
+
+ if (offs >= hdw->fw_size) {
+ pvr2_trace(PVR2_TRACE_FIRMWARE,
+ "Read firmware data offs=%d EOF",
+ offs);
+ ret = 0;
+ break;
+ }
+
+ if (offs + cnt > hdw->fw_size) cnt = hdw->fw_size - offs;
+
+ memcpy(buf,hdw->fw_buffer+offs,cnt);
+
+ pvr2_trace(PVR2_TRACE_FIRMWARE,
+ "Read firmware data offs=%d cnt=%d",
+ offs,cnt);
+ ret = cnt;
+ } while (0);
+ LOCK_GIVE(hdw->big_lock);
+
+ return ret;
+}
+
+
+int pvr2_hdw_v4l_get_minor_number(struct pvr2_hdw *hdw,
+ enum pvr2_v4l_type index)
+{
+ switch (index) {
+ case pvr2_v4l_type_video: return hdw->v4l_minor_number_video;
+ case pvr2_v4l_type_vbi: return hdw->v4l_minor_number_vbi;
+ case pvr2_v4l_type_radio: return hdw->v4l_minor_number_radio;
+ default: return -1;
+ }
+}
+
+
+/* Store a v4l minor device number */
+void pvr2_hdw_v4l_store_minor_number(struct pvr2_hdw *hdw,
+ enum pvr2_v4l_type index,int v)
+{
+ switch (index) {
+ case pvr2_v4l_type_video: hdw->v4l_minor_number_video = v;break;
+ case pvr2_v4l_type_vbi: hdw->v4l_minor_number_vbi = v;break;
+ case pvr2_v4l_type_radio: hdw->v4l_minor_number_radio = v;break;
+ default: break;
+ }
+}
+
+
+static void pvr2_ctl_write_complete(struct urb *urb)
+{
+ struct pvr2_hdw *hdw = urb->context;
+ hdw->ctl_write_pend_flag = 0;
+ if (hdw->ctl_read_pend_flag) return;
+ complete(&hdw->ctl_done);
+}
+
+
+static void pvr2_ctl_read_complete(struct urb *urb)
+{
+ struct pvr2_hdw *hdw = urb->context;
+ hdw->ctl_read_pend_flag = 0;
+ if (hdw->ctl_write_pend_flag) return;
+ complete(&hdw->ctl_done);
+}
+
+struct hdw_timer {
+ struct timer_list timer;
+ struct pvr2_hdw *hdw;
+};
+
+static void pvr2_ctl_timeout(struct timer_list *t)
+{
+ struct hdw_timer *timer = from_timer(timer, t, timer);
+ struct pvr2_hdw *hdw = timer->hdw;
+
+ if (hdw->ctl_write_pend_flag || hdw->ctl_read_pend_flag) {
+ hdw->ctl_timeout_flag = !0;
+ if (hdw->ctl_write_pend_flag)
+ usb_unlink_urb(hdw->ctl_write_urb);
+ if (hdw->ctl_read_pend_flag)
+ usb_unlink_urb(hdw->ctl_read_urb);
+ }
+}
+
+
+/* Issue a command and get a response from the device. This extended
+ version includes a probe flag (which if set means that device errors
+ should not be logged or treated as fatal) and a timeout in jiffies.
+ This can be used to non-lethally probe the health of endpoint 1. */
+static int pvr2_send_request_ex(struct pvr2_hdw *hdw,
+ unsigned int timeout,int probe_fl,
+ void *write_data,unsigned int write_len,
+ void *read_data,unsigned int read_len)
+{
+ unsigned int idx;
+ int status = 0;
+ struct hdw_timer timer = {
+ .hdw = hdw,
+ };
+
+ if (!hdw->ctl_lock_held) {
+ pvr2_trace(PVR2_TRACE_ERROR_LEGS,
+ "Attempted to execute control transfer without lock!!");
+ return -EDEADLK;
+ }
+ if (!hdw->flag_ok && !probe_fl) {
+ pvr2_trace(PVR2_TRACE_ERROR_LEGS,
+ "Attempted to execute control transfer when device not ok");
+ return -EIO;
+ }
+ if (!(hdw->ctl_read_urb && hdw->ctl_write_urb)) {
+ if (!probe_fl) {
+ pvr2_trace(PVR2_TRACE_ERROR_LEGS,
+ "Attempted to execute control transfer when USB is disconnected");
+ }
+ return -ENOTTY;
+ }
+
+ /* Ensure that we have sane parameters */
+ if (!write_data) write_len = 0;
+ if (!read_data) read_len = 0;
+ if (write_len > PVR2_CTL_BUFFSIZE) {
+ pvr2_trace(
+ PVR2_TRACE_ERROR_LEGS,
+ "Attempted to execute %d byte control-write transfer (limit=%d)",
+ write_len,PVR2_CTL_BUFFSIZE);
+ return -EINVAL;
+ }
+ if (read_len > PVR2_CTL_BUFFSIZE) {
+ pvr2_trace(
+ PVR2_TRACE_ERROR_LEGS,
+ "Attempted to execute %d byte control-read transfer (limit=%d)",
+ write_len,PVR2_CTL_BUFFSIZE);
+ return -EINVAL;
+ }
+ if ((!write_len) && (!read_len)) {
+ pvr2_trace(
+ PVR2_TRACE_ERROR_LEGS,
+ "Attempted to execute null control transfer?");
+ return -EINVAL;
+ }
+
+
+ hdw->cmd_debug_state = 1;
+ if (write_len && write_data)
+ hdw->cmd_debug_code = ((unsigned char *)write_data)[0];
+ else
+ hdw->cmd_debug_code = 0;
+ hdw->cmd_debug_write_len = write_len;
+ hdw->cmd_debug_read_len = read_len;
+
+ /* Initialize common stuff */
+ init_completion(&hdw->ctl_done);
+ hdw->ctl_timeout_flag = 0;
+ hdw->ctl_write_pend_flag = 0;
+ hdw->ctl_read_pend_flag = 0;
+ timer_setup_on_stack(&timer.timer, pvr2_ctl_timeout, 0);
+ timer.timer.expires = jiffies + timeout;
+
+ if (write_len && write_data) {
+ hdw->cmd_debug_state = 2;
+ /* Transfer write data to internal buffer */
+ for (idx = 0; idx < write_len; idx++) {
+ hdw->ctl_write_buffer[idx] =
+ ((unsigned char *)write_data)[idx];
+ }
+ /* Initiate a write request */
+ usb_fill_bulk_urb(hdw->ctl_write_urb,
+ hdw->usb_dev,
+ usb_sndbulkpipe(hdw->usb_dev,
+ PVR2_CTL_WRITE_ENDPOINT),
+ hdw->ctl_write_buffer,
+ write_len,
+ pvr2_ctl_write_complete,
+ hdw);
+ hdw->ctl_write_urb->actual_length = 0;
+ hdw->ctl_write_pend_flag = !0;
+ if (usb_urb_ep_type_check(hdw->ctl_write_urb)) {
+ pvr2_trace(
+ PVR2_TRACE_ERROR_LEGS,
+ "Invalid write control endpoint");
+ return -EINVAL;
+ }
+ status = usb_submit_urb(hdw->ctl_write_urb,GFP_KERNEL);
+ if (status < 0) {
+ pvr2_trace(PVR2_TRACE_ERROR_LEGS,
+ "Failed to submit write-control URB status=%d",
+status);
+ hdw->ctl_write_pend_flag = 0;
+ goto done;
+ }
+ }
+
+ if (read_len) {
+ hdw->cmd_debug_state = 3;
+ memset(hdw->ctl_read_buffer,0x43,read_len);
+ /* Initiate a read request */
+ usb_fill_bulk_urb(hdw->ctl_read_urb,
+ hdw->usb_dev,
+ usb_rcvbulkpipe(hdw->usb_dev,
+ PVR2_CTL_READ_ENDPOINT),
+ hdw->ctl_read_buffer,
+ read_len,
+ pvr2_ctl_read_complete,
+ hdw);
+ hdw->ctl_read_urb->actual_length = 0;
+ hdw->ctl_read_pend_flag = !0;
+ if (usb_urb_ep_type_check(hdw->ctl_read_urb)) {
+ pvr2_trace(
+ PVR2_TRACE_ERROR_LEGS,
+ "Invalid read control endpoint");
+ return -EINVAL;
+ }
+ status = usb_submit_urb(hdw->ctl_read_urb,GFP_KERNEL);
+ if (status < 0) {
+ pvr2_trace(PVR2_TRACE_ERROR_LEGS,
+ "Failed to submit read-control URB status=%d",
+status);
+ hdw->ctl_read_pend_flag = 0;
+ goto done;
+ }
+ }
+
+ /* Start timer */
+ add_timer(&timer.timer);
+
+ /* Now wait for all I/O to complete */
+ hdw->cmd_debug_state = 4;
+ while (hdw->ctl_write_pend_flag || hdw->ctl_read_pend_flag) {
+ wait_for_completion(&hdw->ctl_done);
+ }
+ hdw->cmd_debug_state = 5;
+
+ /* Stop timer */
+ del_timer_sync(&timer.timer);
+
+ hdw->cmd_debug_state = 6;
+ status = 0;
+
+ if (hdw->ctl_timeout_flag) {
+ status = -ETIMEDOUT;
+ if (!probe_fl) {
+ pvr2_trace(PVR2_TRACE_ERROR_LEGS,
+ "Timed out control-write");
+ }
+ goto done;
+ }
+
+ if (write_len) {
+ /* Validate results of write request */
+ if ((hdw->ctl_write_urb->status != 0) &&
+ (hdw->ctl_write_urb->status != -ENOENT) &&
+ (hdw->ctl_write_urb->status != -ESHUTDOWN) &&
+ (hdw->ctl_write_urb->status != -ECONNRESET)) {
+ /* USB subsystem is reporting some kind of failure
+ on the write */
+ status = hdw->ctl_write_urb->status;
+ if (!probe_fl) {
+ pvr2_trace(PVR2_TRACE_ERROR_LEGS,
+ "control-write URB failure, status=%d",
+ status);
+ }
+ goto done;
+ }
+ if (hdw->ctl_write_urb->actual_length < write_len) {
+ /* Failed to write enough data */
+ status = -EIO;
+ if (!probe_fl) {
+ pvr2_trace(PVR2_TRACE_ERROR_LEGS,
+ "control-write URB short, expected=%d got=%d",
+ write_len,
+ hdw->ctl_write_urb->actual_length);
+ }
+ goto done;
+ }
+ }
+ if (read_len && read_data) {
+ /* Validate results of read request */
+ if ((hdw->ctl_read_urb->status != 0) &&
+ (hdw->ctl_read_urb->status != -ENOENT) &&
+ (hdw->ctl_read_urb->status != -ESHUTDOWN) &&
+ (hdw->ctl_read_urb->status != -ECONNRESET)) {
+ /* USB subsystem is reporting some kind of failure
+ on the read */
+ status = hdw->ctl_read_urb->status;
+ if (!probe_fl) {
+ pvr2_trace(PVR2_TRACE_ERROR_LEGS,
+ "control-read URB failure, status=%d",
+ status);
+ }
+ goto done;
+ }
+ if (hdw->ctl_read_urb->actual_length < read_len) {
+ /* Failed to read enough data */
+ status = -EIO;
+ if (!probe_fl) {
+ pvr2_trace(PVR2_TRACE_ERROR_LEGS,
+ "control-read URB short, expected=%d got=%d",
+ read_len,
+ hdw->ctl_read_urb->actual_length);
+ }
+ goto done;
+ }
+ /* Transfer retrieved data out from internal buffer */
+ for (idx = 0; idx < read_len; idx++) {
+ ((unsigned char *)read_data)[idx] =
+ hdw->ctl_read_buffer[idx];
+ }
+ }
+
+ done:
+
+ hdw->cmd_debug_state = 0;
+ if ((status < 0) && (!probe_fl)) {
+ pvr2_hdw_render_useless(hdw);
+ }
+ destroy_timer_on_stack(&timer.timer);
+
+ return status;
+}
+
+
+int pvr2_send_request(struct pvr2_hdw *hdw,
+ void *write_data,unsigned int write_len,
+ void *read_data,unsigned int read_len)
+{
+ return pvr2_send_request_ex(hdw,HZ*4,0,
+ write_data,write_len,
+ read_data,read_len);
+}
+
+
+static int pvr2_issue_simple_cmd(struct pvr2_hdw *hdw,u32 cmdcode)
+{
+ int ret;
+ unsigned int cnt = 1;
+ unsigned int args = 0;
+ LOCK_TAKE(hdw->ctl_lock);
+ hdw->cmd_buffer[0] = cmdcode & 0xffu;
+ args = (cmdcode >> 8) & 0xffu;
+ args = (args > 2) ? 2 : args;
+ if (args) {
+ cnt += args;
+ hdw->cmd_buffer[1] = (cmdcode >> 16) & 0xffu;
+ if (args > 1) {
+ hdw->cmd_buffer[2] = (cmdcode >> 24) & 0xffu;
+ }
+ }
+ if (pvrusb2_debug & PVR2_TRACE_INIT) {
+ unsigned int idx;
+ unsigned int ccnt,bcnt;
+ char tbuf[50];
+ cmdcode &= 0xffu;
+ bcnt = 0;
+ ccnt = scnprintf(tbuf+bcnt,
+ sizeof(tbuf)-bcnt,
+ "Sending FX2 command 0x%x",cmdcode);
+ bcnt += ccnt;
+ for (idx = 0; idx < ARRAY_SIZE(pvr2_fx2cmd_desc); idx++) {
+ if (pvr2_fx2cmd_desc[idx].id == cmdcode) {
+ ccnt = scnprintf(tbuf+bcnt,
+ sizeof(tbuf)-bcnt,
+ " \"%s\"",
+ pvr2_fx2cmd_desc[idx].desc);
+ bcnt += ccnt;
+ break;
+ }
+ }
+ if (args) {
+ ccnt = scnprintf(tbuf+bcnt,
+ sizeof(tbuf)-bcnt,
+ " (%u",hdw->cmd_buffer[1]);
+ bcnt += ccnt;
+ if (args > 1) {
+ ccnt = scnprintf(tbuf+bcnt,
+ sizeof(tbuf)-bcnt,
+ ",%u",hdw->cmd_buffer[2]);
+ bcnt += ccnt;
+ }
+ ccnt = scnprintf(tbuf+bcnt,
+ sizeof(tbuf)-bcnt,
+ ")");
+ bcnt += ccnt;
+ }
+ pvr2_trace(PVR2_TRACE_INIT,"%.*s",bcnt,tbuf);
+ }
+ ret = pvr2_send_request(hdw,hdw->cmd_buffer,cnt,NULL,0);
+ LOCK_GIVE(hdw->ctl_lock);
+ return ret;
+}
+
+
+int pvr2_write_register(struct pvr2_hdw *hdw, u16 reg, u32 data)
+{
+ int ret;
+
+ LOCK_TAKE(hdw->ctl_lock);
+
+ hdw->cmd_buffer[0] = FX2CMD_REG_WRITE; /* write register prefix */
+ PVR2_DECOMPOSE_LE(hdw->cmd_buffer,1,data);
+ hdw->cmd_buffer[5] = 0;
+ hdw->cmd_buffer[6] = (reg >> 8) & 0xff;
+ hdw->cmd_buffer[7] = reg & 0xff;
+
+
+ ret = pvr2_send_request(hdw, hdw->cmd_buffer, 8, hdw->cmd_buffer, 0);
+
+ LOCK_GIVE(hdw->ctl_lock);
+
+ return ret;
+}
+
+
+static int pvr2_read_register(struct pvr2_hdw *hdw, u16 reg, u32 *data)
+{
+ int ret = 0;
+
+ LOCK_TAKE(hdw->ctl_lock);
+
+ hdw->cmd_buffer[0] = FX2CMD_REG_READ; /* read register prefix */
+ hdw->cmd_buffer[1] = 0;
+ hdw->cmd_buffer[2] = 0;
+ hdw->cmd_buffer[3] = 0;
+ hdw->cmd_buffer[4] = 0;
+ hdw->cmd_buffer[5] = 0;
+ hdw->cmd_buffer[6] = (reg >> 8) & 0xff;
+ hdw->cmd_buffer[7] = reg & 0xff;
+
+ ret |= pvr2_send_request(hdw, hdw->cmd_buffer, 8, hdw->cmd_buffer, 4);
+ *data = PVR2_COMPOSE_LE(hdw->cmd_buffer,0);
+
+ LOCK_GIVE(hdw->ctl_lock);
+
+ return ret;
+}
+
+
+void pvr2_hdw_render_useless(struct pvr2_hdw *hdw)
+{
+ if (!hdw->flag_ok) return;
+ pvr2_trace(PVR2_TRACE_ERROR_LEGS,
+ "Device being rendered inoperable");
+ if (hdw->vid_stream) {
+ pvr2_stream_setup(hdw->vid_stream,NULL,0,0);
+ }
+ hdw->flag_ok = 0;
+ trace_stbit("flag_ok",hdw->flag_ok);
+ pvr2_hdw_state_sched(hdw);
+}
+
+
+void pvr2_hdw_device_reset(struct pvr2_hdw *hdw)
+{
+ int ret;
+ pvr2_trace(PVR2_TRACE_INIT,"Performing a device reset...");
+ ret = usb_lock_device_for_reset(hdw->usb_dev,NULL);
+ if (ret == 0) {
+ ret = usb_reset_device(hdw->usb_dev);
+ usb_unlock_device(hdw->usb_dev);
+ } else {
+ pvr2_trace(PVR2_TRACE_ERROR_LEGS,
+ "Failed to lock USB device ret=%d",ret);
+ }
+ if (init_pause_msec) {
+ pvr2_trace(PVR2_TRACE_INFO,
+ "Waiting %u msec for hardware to settle",
+ init_pause_msec);
+ msleep(init_pause_msec);
+ }
+
+}
+
+
+void pvr2_hdw_cpureset_assert(struct pvr2_hdw *hdw,int val)
+{
+ char *da;
+ unsigned int pipe;
+ int ret;
+
+ if (!hdw->usb_dev) return;
+
+ da = kmalloc(16, GFP_KERNEL);
+
+ if (da == NULL) {
+ pvr2_trace(PVR2_TRACE_ERROR_LEGS,
+ "Unable to allocate memory to control CPU reset");
+ return;
+ }
+
+ pvr2_trace(PVR2_TRACE_INIT,"cpureset_assert(%d)",val);
+
+ da[0] = val ? 0x01 : 0x00;
+
+ /* Write the CPUCS register on the 8051. The lsb of the register
+ is the reset bit; a 1 asserts reset while a 0 clears it. */
+ pipe = usb_sndctrlpipe(hdw->usb_dev, 0);
+ ret = usb_control_msg(hdw->usb_dev,pipe,0xa0,0x40,0xe600,0,da,1,1000);
+ if (ret < 0) {
+ pvr2_trace(PVR2_TRACE_ERROR_LEGS,
+ "cpureset_assert(%d) error=%d",val,ret);
+ pvr2_hdw_render_useless(hdw);
+ }
+
+ kfree(da);
+}
+
+
+int pvr2_hdw_cmd_deep_reset(struct pvr2_hdw *hdw)
+{
+ return pvr2_issue_simple_cmd(hdw,FX2CMD_DEEP_RESET);
+}
+
+
+int pvr2_hdw_cmd_powerup(struct pvr2_hdw *hdw)
+{
+ return pvr2_issue_simple_cmd(hdw,FX2CMD_POWER_ON);
+}
+
+
+
+int pvr2_hdw_cmd_decoder_reset(struct pvr2_hdw *hdw)
+{
+ pvr2_trace(PVR2_TRACE_INIT,
+ "Requesting decoder reset");
+ if (hdw->decoder_client_id) {
+ v4l2_device_call_all(&hdw->v4l2_dev, hdw->decoder_client_id,
+ core, reset, 0);
+ pvr2_hdw_cx25840_vbi_hack(hdw);
+ return 0;
+ }
+ pvr2_trace(PVR2_TRACE_INIT,
+ "Unable to reset decoder: nothing attached");
+ return -ENOTTY;
+}
+
+
+static int pvr2_hdw_cmd_hcw_demod_reset(struct pvr2_hdw *hdw, int onoff)
+{
+ hdw->flag_ok = !0;
+
+ /* Use this for Hauppauge 160xxx only */
+ if (le16_to_cpu(hdw->usb_dev->descriptor.idVendor) == 0x2040 &&
+ (le16_to_cpu(hdw->usb_dev->descriptor.idProduct) == 0x7502 ||
+ le16_to_cpu(hdw->usb_dev->descriptor.idProduct) == 0x7510)) {
+ pr_debug("%s(): resetting demod on Hauppauge 160xxx platform skipped\n",
+ __func__);
+ /* Can't reset 160xxx or it will trash Demod tristate */
+ return pvr2_issue_simple_cmd(hdw,
+ FX2CMD_HCW_MAKO_SLEEP_PIN |
+ (1 << 8) |
+ ((onoff ? 1 : 0) << 16));
+ }
+
+ return pvr2_issue_simple_cmd(hdw,
+ FX2CMD_HCW_DEMOD_RESETIN |
+ (1 << 8) |
+ ((onoff ? 1 : 0) << 16));
+}
+
+
+static int pvr2_hdw_cmd_onair_fe_power_ctrl(struct pvr2_hdw *hdw, int onoff)
+{
+ hdw->flag_ok = !0;
+ return pvr2_issue_simple_cmd(hdw,(onoff ?
+ FX2CMD_ONAIR_DTV_POWER_ON :
+ FX2CMD_ONAIR_DTV_POWER_OFF));
+}
+
+
+static int pvr2_hdw_cmd_onair_digital_path_ctrl(struct pvr2_hdw *hdw,
+ int onoff)
+{
+ return pvr2_issue_simple_cmd(hdw,(onoff ?
+ FX2CMD_ONAIR_DTV_STREAMING_ON :
+ FX2CMD_ONAIR_DTV_STREAMING_OFF));
+}
+
+
+static void pvr2_hdw_cmd_modeswitch(struct pvr2_hdw *hdw,int digitalFl)
+{
+ int cmode;
+ /* Compare digital/analog desired setting with current setting. If
+ they don't match, fix it... */
+ cmode = (digitalFl ? PVR2_PATHWAY_DIGITAL : PVR2_PATHWAY_ANALOG);
+ if (cmode == hdw->pathway_state) {
+ /* They match; nothing to do */
+ return;
+ }
+
+ switch (hdw->hdw_desc->digital_control_scheme) {
+ case PVR2_DIGITAL_SCHEME_HAUPPAUGE:
+ pvr2_hdw_cmd_hcw_demod_reset(hdw,digitalFl);
+ if (cmode == PVR2_PATHWAY_ANALOG) {
+ /* If moving to analog mode, also force the decoder
+ to reset. If no decoder is attached, then it's
+ ok to ignore this because if/when the decoder
+ attaches, it will reset itself at that time. */
+ pvr2_hdw_cmd_decoder_reset(hdw);
+ }
+ break;
+ case PVR2_DIGITAL_SCHEME_ONAIR:
+ /* Supposedly we should always have the power on whether in
+ digital or analog mode. But for now do what appears to
+ work... */
+ pvr2_hdw_cmd_onair_fe_power_ctrl(hdw,digitalFl);
+ break;
+ default: break;
+ }
+
+ pvr2_hdw_untrip_unlocked(hdw);
+ hdw->pathway_state = cmode;
+}
+
+
+static void pvr2_led_ctrl_hauppauge(struct pvr2_hdw *hdw, int onoff)
+{
+ /* change some GPIO data
+ *
+ * note: bit d7 of dir appears to control the LED,
+ * so we shut it off here.
+ *
+ */
+ if (onoff) {
+ pvr2_hdw_gpio_chg_dir(hdw, 0xffffffff, 0x00000481);
+ } else {
+ pvr2_hdw_gpio_chg_dir(hdw, 0xffffffff, 0x00000401);
+ }
+ pvr2_hdw_gpio_chg_out(hdw, 0xffffffff, 0x00000000);
+}
+
+
+typedef void (*led_method_func)(struct pvr2_hdw *,int);
+
+static led_method_func led_methods[] = {
+ [PVR2_LED_SCHEME_HAUPPAUGE] = pvr2_led_ctrl_hauppauge,
+};
+
+
+/* Toggle LED */
+static void pvr2_led_ctrl(struct pvr2_hdw *hdw,int onoff)
+{
+ unsigned int scheme_id;
+ led_method_func fp;
+
+ if ((!onoff) == (!hdw->led_on)) return;
+
+ hdw->led_on = onoff != 0;
+
+ scheme_id = hdw->hdw_desc->led_scheme;
+ if (scheme_id < ARRAY_SIZE(led_methods)) {
+ fp = led_methods[scheme_id];
+ } else {
+ fp = NULL;
+ }
+
+ if (fp) (*fp)(hdw,onoff);
+}
+
+
+/* Stop / start video stream transport */
+static int pvr2_hdw_cmd_usbstream(struct pvr2_hdw *hdw,int runFl)
+{
+ int ret;
+
+ /* If we're in analog mode, then just issue the usual analog
+ command. */
+ if (hdw->pathway_state == PVR2_PATHWAY_ANALOG) {
+ return pvr2_issue_simple_cmd(hdw,
+ (runFl ?
+ FX2CMD_STREAMING_ON :
+ FX2CMD_STREAMING_OFF));
+ /*Note: Not reached */
+ }
+
+ if (hdw->pathway_state != PVR2_PATHWAY_DIGITAL) {
+ /* Whoops, we don't know what mode we're in... */
+ return -EINVAL;
+ }
+
+ /* To get here we have to be in digital mode. The mechanism here
+ is unfortunately different for different vendors. So we switch
+ on the device's digital scheme attribute in order to figure out
+ what to do. */
+ switch (hdw->hdw_desc->digital_control_scheme) {
+ case PVR2_DIGITAL_SCHEME_HAUPPAUGE:
+ return pvr2_issue_simple_cmd(hdw,
+ (runFl ?
+ FX2CMD_HCW_DTV_STREAMING_ON :
+ FX2CMD_HCW_DTV_STREAMING_OFF));
+ case PVR2_DIGITAL_SCHEME_ONAIR:
+ ret = pvr2_issue_simple_cmd(hdw,
+ (runFl ?
+ FX2CMD_STREAMING_ON :
+ FX2CMD_STREAMING_OFF));
+ if (ret) return ret;
+ return pvr2_hdw_cmd_onair_digital_path_ctrl(hdw,runFl);
+ default:
+ return -EINVAL;
+ }
+}
+
+
+/* Evaluate whether or not state_pathway_ok can change */
+static int state_eval_pathway_ok(struct pvr2_hdw *hdw)
+{
+ if (hdw->state_pathway_ok) {
+ /* Nothing to do if pathway is already ok */
+ return 0;
+ }
+ if (!hdw->state_pipeline_idle) {
+ /* Not allowed to change anything if pipeline is not idle */
+ return 0;
+ }
+ pvr2_hdw_cmd_modeswitch(hdw,hdw->input_val == PVR2_CVAL_INPUT_DTV);
+ hdw->state_pathway_ok = !0;
+ trace_stbit("state_pathway_ok",hdw->state_pathway_ok);
+ return !0;
+}
+
+
+/* Evaluate whether or not state_encoder_ok can change */
+static int state_eval_encoder_ok(struct pvr2_hdw *hdw)
+{
+ if (hdw->state_encoder_ok) return 0;
+ if (hdw->flag_tripped) return 0;
+ if (hdw->state_encoder_run) return 0;
+ if (hdw->state_encoder_config) return 0;
+ if (hdw->state_decoder_run) return 0;
+ if (hdw->state_usbstream_run) return 0;
+ if (hdw->pathway_state == PVR2_PATHWAY_DIGITAL) {
+ if (!hdw->hdw_desc->flag_digital_requires_cx23416) return 0;
+ } else if (hdw->pathway_state != PVR2_PATHWAY_ANALOG) {
+ return 0;
+ }
+
+ if (pvr2_upload_firmware2(hdw) < 0) {
+ hdw->flag_tripped = !0;
+ trace_stbit("flag_tripped",hdw->flag_tripped);
+ return !0;
+ }
+ hdw->state_encoder_ok = !0;
+ trace_stbit("state_encoder_ok",hdw->state_encoder_ok);
+ return !0;
+}
+
+
+/* Evaluate whether or not state_encoder_config can change */
+static int state_eval_encoder_config(struct pvr2_hdw *hdw)
+{
+ if (hdw->state_encoder_config) {
+ if (hdw->state_encoder_ok) {
+ if (hdw->state_pipeline_req &&
+ !hdw->state_pipeline_pause) return 0;
+ }
+ hdw->state_encoder_config = 0;
+ hdw->state_encoder_waitok = 0;
+ trace_stbit("state_encoder_waitok",hdw->state_encoder_waitok);
+ /* paranoia - solve race if timer just completed */
+ del_timer_sync(&hdw->encoder_wait_timer);
+ } else {
+ if (!hdw->state_pathway_ok ||
+ (hdw->pathway_state != PVR2_PATHWAY_ANALOG) ||
+ !hdw->state_encoder_ok ||
+ !hdw->state_pipeline_idle ||
+ hdw->state_pipeline_pause ||
+ !hdw->state_pipeline_req ||
+ !hdw->state_pipeline_config) {
+ /* We must reset the enforced wait interval if
+ anything has happened that might have disturbed
+ the encoder. This should be a rare case. */
+ if (timer_pending(&hdw->encoder_wait_timer)) {
+ del_timer_sync(&hdw->encoder_wait_timer);
+ }
+ if (hdw->state_encoder_waitok) {
+ /* Must clear the state - therefore we did
+ something to a state bit and must also
+ return true. */
+ hdw->state_encoder_waitok = 0;
+ trace_stbit("state_encoder_waitok",
+ hdw->state_encoder_waitok);
+ return !0;
+ }
+ return 0;
+ }
+ if (!hdw->state_encoder_waitok) {
+ if (!timer_pending(&hdw->encoder_wait_timer)) {
+ /* waitok flag wasn't set and timer isn't
+ running. Check flag once more to avoid
+ a race then start the timer. This is
+ the point when we measure out a minimal
+ quiet interval before doing something to
+ the encoder. */
+ if (!hdw->state_encoder_waitok) {
+ hdw->encoder_wait_timer.expires =
+ jiffies + msecs_to_jiffies(
+ TIME_MSEC_ENCODER_WAIT);
+ add_timer(&hdw->encoder_wait_timer);
+ }
+ }
+ /* We can't continue until we know we have been
+ quiet for the interval measured by this
+ timer. */
+ return 0;
+ }
+ pvr2_encoder_configure(hdw);
+ if (hdw->state_encoder_ok) hdw->state_encoder_config = !0;
+ }
+ trace_stbit("state_encoder_config",hdw->state_encoder_config);
+ return !0;
+}
+
+
+/* Return true if the encoder should not be running. */
+static int state_check_disable_encoder_run(struct pvr2_hdw *hdw)
+{
+ if (!hdw->state_encoder_ok) {
+ /* Encoder isn't healthy at the moment, so stop it. */
+ return !0;
+ }
+ if (!hdw->state_pathway_ok) {
+ /* Mode is not understood at the moment (i.e. it wants to
+ change), so encoder must be stopped. */
+ return !0;
+ }
+
+ switch (hdw->pathway_state) {
+ case PVR2_PATHWAY_ANALOG:
+ if (!hdw->state_decoder_run) {
+ /* We're in analog mode and the decoder is not
+ running; thus the encoder should be stopped as
+ well. */
+ return !0;
+ }
+ break;
+ case PVR2_PATHWAY_DIGITAL:
+ if (hdw->state_encoder_runok) {
+ /* This is a funny case. We're in digital mode so
+ really the encoder should be stopped. However
+ if it really is running, only kill it after
+ runok has been set. This gives a chance for the
+ onair quirk to function (encoder must run
+ briefly first, at least once, before onair
+ digital streaming can work). */
+ return !0;
+ }
+ break;
+ default:
+ /* Unknown mode; so encoder should be stopped. */
+ return !0;
+ }
+
+ /* If we get here, we haven't found a reason to stop the
+ encoder. */
+ return 0;
+}
+
+
+/* Return true if the encoder should be running. */
+static int state_check_enable_encoder_run(struct pvr2_hdw *hdw)
+{
+ if (!hdw->state_encoder_ok) {
+ /* Don't run the encoder if it isn't healthy... */
+ return 0;
+ }
+ if (!hdw->state_pathway_ok) {
+ /* Don't run the encoder if we don't (yet) know what mode
+ we need to be in... */
+ return 0;
+ }
+
+ switch (hdw->pathway_state) {
+ case PVR2_PATHWAY_ANALOG:
+ if (hdw->state_decoder_run && hdw->state_decoder_ready) {
+ /* In analog mode, if the decoder is running, then
+ run the encoder. */
+ return !0;
+ }
+ break;
+ case PVR2_PATHWAY_DIGITAL:
+ if ((hdw->hdw_desc->digital_control_scheme ==
+ PVR2_DIGITAL_SCHEME_ONAIR) &&
+ !hdw->state_encoder_runok) {
+ /* This is a quirk. OnAir hardware won't stream
+ digital until the encoder has been run at least
+ once, for a minimal period of time (empiricially
+ measured to be 1/4 second). So if we're on
+ OnAir hardware and the encoder has never been
+ run at all, then start the encoder. Normal
+ state machine logic in the driver will
+ automatically handle the remaining bits. */
+ return !0;
+ }
+ break;
+ default:
+ /* For completeness (unknown mode; encoder won't run ever) */
+ break;
+ }
+ /* If we get here, then we haven't found any reason to run the
+ encoder, so don't run it. */
+ return 0;
+}
+
+
+/* Evaluate whether or not state_encoder_run can change */
+static int state_eval_encoder_run(struct pvr2_hdw *hdw)
+{
+ if (hdw->state_encoder_run) {
+ if (!state_check_disable_encoder_run(hdw)) return 0;
+ if (hdw->state_encoder_ok) {
+ del_timer_sync(&hdw->encoder_run_timer);
+ if (pvr2_encoder_stop(hdw) < 0) return !0;
+ }
+ hdw->state_encoder_run = 0;
+ } else {
+ if (!state_check_enable_encoder_run(hdw)) return 0;
+ if (pvr2_encoder_start(hdw) < 0) return !0;
+ hdw->state_encoder_run = !0;
+ if (!hdw->state_encoder_runok) {
+ hdw->encoder_run_timer.expires = jiffies +
+ msecs_to_jiffies(TIME_MSEC_ENCODER_OK);
+ add_timer(&hdw->encoder_run_timer);
+ }
+ }
+ trace_stbit("state_encoder_run",hdw->state_encoder_run);
+ return !0;
+}
+
+
+/* Timeout function for quiescent timer. */
+static void pvr2_hdw_quiescent_timeout(struct timer_list *t)
+{
+ struct pvr2_hdw *hdw = from_timer(hdw, t, quiescent_timer);
+ hdw->state_decoder_quiescent = !0;
+ trace_stbit("state_decoder_quiescent",hdw->state_decoder_quiescent);
+ hdw->state_stale = !0;
+ schedule_work(&hdw->workpoll);
+}
+
+
+/* Timeout function for decoder stabilization timer. */
+static void pvr2_hdw_decoder_stabilization_timeout(struct timer_list *t)
+{
+ struct pvr2_hdw *hdw = from_timer(hdw, t, decoder_stabilization_timer);
+ hdw->state_decoder_ready = !0;
+ trace_stbit("state_decoder_ready", hdw->state_decoder_ready);
+ hdw->state_stale = !0;
+ schedule_work(&hdw->workpoll);
+}
+
+
+/* Timeout function for encoder wait timer. */
+static void pvr2_hdw_encoder_wait_timeout(struct timer_list *t)
+{
+ struct pvr2_hdw *hdw = from_timer(hdw, t, encoder_wait_timer);
+ hdw->state_encoder_waitok = !0;
+ trace_stbit("state_encoder_waitok",hdw->state_encoder_waitok);
+ hdw->state_stale = !0;
+ schedule_work(&hdw->workpoll);
+}
+
+
+/* Timeout function for encoder run timer. */
+static void pvr2_hdw_encoder_run_timeout(struct timer_list *t)
+{
+ struct pvr2_hdw *hdw = from_timer(hdw, t, encoder_run_timer);
+ if (!hdw->state_encoder_runok) {
+ hdw->state_encoder_runok = !0;
+ trace_stbit("state_encoder_runok",hdw->state_encoder_runok);
+ hdw->state_stale = !0;
+ schedule_work(&hdw->workpoll);
+ }
+}
+
+
+/* Evaluate whether or not state_decoder_run can change */
+static int state_eval_decoder_run(struct pvr2_hdw *hdw)
+{
+ if (hdw->state_decoder_run) {
+ if (hdw->state_encoder_ok) {
+ if (hdw->state_pipeline_req &&
+ !hdw->state_pipeline_pause &&
+ hdw->state_pathway_ok) return 0;
+ }
+ if (!hdw->flag_decoder_missed) {
+ pvr2_decoder_enable(hdw,0);
+ }
+ hdw->state_decoder_quiescent = 0;
+ hdw->state_decoder_run = 0;
+ /* paranoia - solve race if timer(s) just completed */
+ del_timer_sync(&hdw->quiescent_timer);
+ /* Kill the stabilization timer, in case we're killing the
+ encoder before the previous stabilization interval has
+ been properly timed. */
+ del_timer_sync(&hdw->decoder_stabilization_timer);
+ hdw->state_decoder_ready = 0;
+ } else {
+ if (!hdw->state_decoder_quiescent) {
+ if (!timer_pending(&hdw->quiescent_timer)) {
+ /* We don't do something about the
+ quiescent timer until right here because
+ we also want to catch cases where the
+ decoder was already not running (like
+ after initialization) as opposed to
+ knowing that we had just stopped it.
+ The second flag check is here to cover a
+ race - the timer could have run and set
+ this flag just after the previous check
+ but before we did the pending check. */
+ if (!hdw->state_decoder_quiescent) {
+ hdw->quiescent_timer.expires =
+ jiffies + msecs_to_jiffies(
+ TIME_MSEC_DECODER_WAIT);
+ add_timer(&hdw->quiescent_timer);
+ }
+ }
+ /* Don't allow decoder to start again until it has
+ been quiesced first. This little detail should
+ hopefully further stabilize the encoder. */
+ return 0;
+ }
+ if (!hdw->state_pathway_ok ||
+ (hdw->pathway_state != PVR2_PATHWAY_ANALOG) ||
+ !hdw->state_pipeline_req ||
+ hdw->state_pipeline_pause ||
+ !hdw->state_pipeline_config ||
+ !hdw->state_encoder_config ||
+ !hdw->state_encoder_ok) return 0;
+ del_timer_sync(&hdw->quiescent_timer);
+ if (hdw->flag_decoder_missed) return 0;
+ if (pvr2_decoder_enable(hdw,!0) < 0) return 0;
+ hdw->state_decoder_quiescent = 0;
+ hdw->state_decoder_ready = 0;
+ hdw->state_decoder_run = !0;
+ if (hdw->decoder_client_id == PVR2_CLIENT_ID_SAA7115) {
+ hdw->decoder_stabilization_timer.expires =
+ jiffies + msecs_to_jiffies(
+ TIME_MSEC_DECODER_STABILIZATION_WAIT);
+ add_timer(&hdw->decoder_stabilization_timer);
+ } else {
+ hdw->state_decoder_ready = !0;
+ }
+ }
+ trace_stbit("state_decoder_quiescent",hdw->state_decoder_quiescent);
+ trace_stbit("state_decoder_run",hdw->state_decoder_run);
+ trace_stbit("state_decoder_ready", hdw->state_decoder_ready);
+ return !0;
+}
+
+
+/* Evaluate whether or not state_usbstream_run can change */
+static int state_eval_usbstream_run(struct pvr2_hdw *hdw)
+{
+ if (hdw->state_usbstream_run) {
+ int fl = !0;
+ if (hdw->pathway_state == PVR2_PATHWAY_ANALOG) {
+ fl = (hdw->state_encoder_ok &&
+ hdw->state_encoder_run);
+ } else if ((hdw->pathway_state == PVR2_PATHWAY_DIGITAL) &&
+ (hdw->hdw_desc->flag_digital_requires_cx23416)) {
+ fl = hdw->state_encoder_ok;
+ }
+ if (fl &&
+ hdw->state_pipeline_req &&
+ !hdw->state_pipeline_pause &&
+ hdw->state_pathway_ok) {
+ return 0;
+ }
+ pvr2_hdw_cmd_usbstream(hdw,0);
+ hdw->state_usbstream_run = 0;
+ } else {
+ if (!hdw->state_pipeline_req ||
+ hdw->state_pipeline_pause ||
+ !hdw->state_pathway_ok) return 0;
+ if (hdw->pathway_state == PVR2_PATHWAY_ANALOG) {
+ if (!hdw->state_encoder_ok ||
+ !hdw->state_encoder_run) return 0;
+ } else if ((hdw->pathway_state == PVR2_PATHWAY_DIGITAL) &&
+ (hdw->hdw_desc->flag_digital_requires_cx23416)) {
+ if (!hdw->state_encoder_ok) return 0;
+ if (hdw->state_encoder_run) return 0;
+ if (hdw->hdw_desc->digital_control_scheme ==
+ PVR2_DIGITAL_SCHEME_ONAIR) {
+ /* OnAir digital receivers won't stream
+ unless the analog encoder has run first.
+ Why? I have no idea. But don't even
+ try until we know the analog side is
+ known to have run. */
+ if (!hdw->state_encoder_runok) return 0;
+ }
+ }
+ if (pvr2_hdw_cmd_usbstream(hdw,!0) < 0) return 0;
+ hdw->state_usbstream_run = !0;
+ }
+ trace_stbit("state_usbstream_run",hdw->state_usbstream_run);
+ return !0;
+}
+
+
+/* Attempt to configure pipeline, if needed */
+static int state_eval_pipeline_config(struct pvr2_hdw *hdw)
+{
+ if (hdw->state_pipeline_config ||
+ hdw->state_pipeline_pause) return 0;
+ pvr2_hdw_commit_execute(hdw);
+ return !0;
+}
+
+
+/* Update pipeline idle and pipeline pause tracking states based on other
+ inputs. This must be called whenever the other relevant inputs have
+ changed. */
+static int state_update_pipeline_state(struct pvr2_hdw *hdw)
+{
+ unsigned int st;
+ int updatedFl = 0;
+ /* Update pipeline state */
+ st = !(hdw->state_encoder_run ||
+ hdw->state_decoder_run ||
+ hdw->state_usbstream_run ||
+ (!hdw->state_decoder_quiescent));
+ if (!st != !hdw->state_pipeline_idle) {
+ hdw->state_pipeline_idle = st;
+ updatedFl = !0;
+ }
+ if (hdw->state_pipeline_idle && hdw->state_pipeline_pause) {
+ hdw->state_pipeline_pause = 0;
+ updatedFl = !0;
+ }
+ return updatedFl;
+}
+
+
+typedef int (*state_eval_func)(struct pvr2_hdw *);
+
+/* Set of functions to be run to evaluate various states in the driver. */
+static const state_eval_func eval_funcs[] = {
+ state_eval_pathway_ok,
+ state_eval_pipeline_config,
+ state_eval_encoder_ok,
+ state_eval_encoder_config,
+ state_eval_decoder_run,
+ state_eval_encoder_run,
+ state_eval_usbstream_run,
+};
+
+
+/* Process various states and return true if we did anything interesting. */
+static int pvr2_hdw_state_update(struct pvr2_hdw *hdw)
+{
+ unsigned int i;
+ int state_updated = 0;
+ int check_flag;
+
+ if (!hdw->state_stale) return 0;
+ if ((hdw->fw1_state != FW1_STATE_OK) ||
+ !hdw->flag_ok) {
+ hdw->state_stale = 0;
+ return !0;
+ }
+ /* This loop is the heart of the entire driver. It keeps trying to
+ evaluate various bits of driver state until nothing changes for
+ one full iteration. Each "bit of state" tracks some global
+ aspect of the driver, e.g. whether decoder should run, if
+ pipeline is configured, usb streaming is on, etc. We separately
+ evaluate each of those questions based on other driver state to
+ arrive at the correct running configuration. */
+ do {
+ check_flag = 0;
+ state_update_pipeline_state(hdw);
+ /* Iterate over each bit of state */
+ for (i = 0; (i<ARRAY_SIZE(eval_funcs)) && hdw->flag_ok; i++) {
+ if ((*eval_funcs[i])(hdw)) {
+ check_flag = !0;
+ state_updated = !0;
+ state_update_pipeline_state(hdw);
+ }
+ }
+ } while (check_flag && hdw->flag_ok);
+ hdw->state_stale = 0;
+ trace_stbit("state_stale",hdw->state_stale);
+ return state_updated;
+}
+
+
+static unsigned int print_input_mask(unsigned int msk,
+ char *buf,unsigned int acnt)
+{
+ unsigned int idx,ccnt;
+ unsigned int tcnt = 0;
+ for (idx = 0; idx < ARRAY_SIZE(control_values_input); idx++) {
+ if (!((1UL << idx) & msk)) continue;
+ ccnt = scnprintf(buf+tcnt,
+ acnt-tcnt,
+ "%s%s",
+ (tcnt ? ", " : ""),
+ control_values_input[idx]);
+ tcnt += ccnt;
+ }
+ return tcnt;
+}
+
+
+static const char *pvr2_pathway_state_name(int id)
+{
+ switch (id) {
+ case PVR2_PATHWAY_ANALOG: return "analog";
+ case PVR2_PATHWAY_DIGITAL: return "digital";
+ default: return "unknown";
+ }
+}
+
+
+static unsigned int pvr2_hdw_report_unlocked(struct pvr2_hdw *hdw,int which,
+ char *buf,unsigned int acnt)
+{
+ switch (which) {
+ case 0:
+ return scnprintf(
+ buf,acnt,
+ "driver:%s%s%s%s%s <mode=%s>",
+ (hdw->flag_ok ? " <ok>" : " <fail>"),
+ (hdw->flag_init_ok ? " <init>" : " <uninitialized>"),
+ (hdw->flag_disconnected ? " <disconnected>" :
+ " <connected>"),
+ (hdw->flag_tripped ? " <tripped>" : ""),
+ (hdw->flag_decoder_missed ? " <no decoder>" : ""),
+ pvr2_pathway_state_name(hdw->pathway_state));
+
+ case 1:
+ return scnprintf(
+ buf,acnt,
+ "pipeline:%s%s%s%s",
+ (hdw->state_pipeline_idle ? " <idle>" : ""),
+ (hdw->state_pipeline_config ?
+ " <configok>" : " <stale>"),
+ (hdw->state_pipeline_req ? " <req>" : ""),
+ (hdw->state_pipeline_pause ? " <pause>" : ""));
+ case 2:
+ return scnprintf(
+ buf,acnt,
+ "worker:%s%s%s%s%s%s%s",
+ (hdw->state_decoder_run ?
+ (hdw->state_decoder_ready ?
+ "<decode:run>" : " <decode:start>") :
+ (hdw->state_decoder_quiescent ?
+ "" : " <decode:stop>")),
+ (hdw->state_decoder_quiescent ?
+ " <decode:quiescent>" : ""),
+ (hdw->state_encoder_ok ?
+ "" : " <encode:init>"),
+ (hdw->state_encoder_run ?
+ (hdw->state_encoder_runok ?
+ " <encode:run>" :
+ " <encode:firstrun>") :
+ (hdw->state_encoder_runok ?
+ " <encode:stop>" :
+ " <encode:virgin>")),
+ (hdw->state_encoder_config ?
+ " <encode:configok>" :
+ (hdw->state_encoder_waitok ?
+ "" : " <encode:waitok>")),
+ (hdw->state_usbstream_run ?
+ " <usb:run>" : " <usb:stop>"),
+ (hdw->state_pathway_ok ?
+ " <pathway:ok>" : ""));
+ case 3:
+ return scnprintf(
+ buf,acnt,
+ "state: %s",
+ pvr2_get_state_name(hdw->master_state));
+ case 4: {
+ unsigned int tcnt = 0;
+ unsigned int ccnt;
+
+ ccnt = scnprintf(buf,
+ acnt,
+ "Hardware supported inputs: ");
+ tcnt += ccnt;
+ tcnt += print_input_mask(hdw->input_avail_mask,
+ buf+tcnt,
+ acnt-tcnt);
+ if (hdw->input_avail_mask != hdw->input_allowed_mask) {
+ ccnt = scnprintf(buf+tcnt,
+ acnt-tcnt,
+ "; allowed inputs: ");
+ tcnt += ccnt;
+ tcnt += print_input_mask(hdw->input_allowed_mask,
+ buf+tcnt,
+ acnt-tcnt);
+ }
+ return tcnt;
+ }
+ case 5: {
+ struct pvr2_stream_stats stats;
+ if (!hdw->vid_stream) break;
+ pvr2_stream_get_stats(hdw->vid_stream,
+ &stats,
+ 0);
+ return scnprintf(
+ buf,acnt,
+ "Bytes streamed=%u URBs: queued=%u idle=%u ready=%u processed=%u failed=%u",
+ stats.bytes_processed,
+ stats.buffers_in_queue,
+ stats.buffers_in_idle,
+ stats.buffers_in_ready,
+ stats.buffers_processed,
+ stats.buffers_failed);
+ }
+ case 6: {
+ unsigned int id = hdw->ir_scheme_active;
+ return scnprintf(buf, acnt, "ir scheme: id=%d %s", id,
+ (id >= ARRAY_SIZE(ir_scheme_names) ?
+ "?" : ir_scheme_names[id]));
+ }
+ default: break;
+ }
+ return 0;
+}
+
+
+/* Generate report containing info about attached sub-devices and attached
+ i2c clients, including an indication of which attached i2c clients are
+ actually sub-devices. */
+static unsigned int pvr2_hdw_report_clients(struct pvr2_hdw *hdw,
+ char *buf, unsigned int acnt)
+{
+ struct v4l2_subdev *sd;
+ unsigned int tcnt = 0;
+ unsigned int ccnt;
+ struct i2c_client *client;
+ const char *p;
+ unsigned int id;
+
+ ccnt = scnprintf(buf, acnt, "Associated v4l2-subdev drivers and I2C clients:\n");
+ tcnt += ccnt;
+ v4l2_device_for_each_subdev(sd, &hdw->v4l2_dev) {
+ id = sd->grp_id;
+ p = NULL;
+ if (id < ARRAY_SIZE(module_names)) p = module_names[id];
+ if (p) {
+ ccnt = scnprintf(buf + tcnt, acnt - tcnt, " %s:", p);
+ tcnt += ccnt;
+ } else {
+ ccnt = scnprintf(buf + tcnt, acnt - tcnt,
+ " (unknown id=%u):", id);
+ tcnt += ccnt;
+ }
+ client = v4l2_get_subdevdata(sd);
+ if (client) {
+ ccnt = scnprintf(buf + tcnt, acnt - tcnt,
+ " %s @ %02x\n", client->name,
+ client->addr);
+ tcnt += ccnt;
+ } else {
+ ccnt = scnprintf(buf + tcnt, acnt - tcnt,
+ " no i2c client\n");
+ tcnt += ccnt;
+ }
+ }
+ return tcnt;
+}
+
+
+unsigned int pvr2_hdw_state_report(struct pvr2_hdw *hdw,
+ char *buf,unsigned int acnt)
+{
+ unsigned int bcnt,ccnt,idx;
+ bcnt = 0;
+ LOCK_TAKE(hdw->big_lock);
+ for (idx = 0; ; idx++) {
+ ccnt = pvr2_hdw_report_unlocked(hdw,idx,buf,acnt);
+ if (!ccnt) break;
+ bcnt += ccnt; acnt -= ccnt; buf += ccnt;
+ if (!acnt) break;
+ buf[0] = '\n'; ccnt = 1;
+ bcnt += ccnt; acnt -= ccnt; buf += ccnt;
+ }
+ ccnt = pvr2_hdw_report_clients(hdw, buf, acnt);
+ bcnt += ccnt; acnt -= ccnt; buf += ccnt;
+ LOCK_GIVE(hdw->big_lock);
+ return bcnt;
+}
+
+
+static void pvr2_hdw_state_log_state(struct pvr2_hdw *hdw)
+{
+ char buf[256];
+ unsigned int idx, ccnt;
+ unsigned int lcnt, ucnt;
+
+ for (idx = 0; ; idx++) {
+ ccnt = pvr2_hdw_report_unlocked(hdw,idx,buf,sizeof(buf));
+ if (!ccnt) break;
+ pr_info("%s %.*s\n", hdw->name, ccnt, buf);
+ }
+ ccnt = pvr2_hdw_report_clients(hdw, buf, sizeof(buf));
+ if (ccnt >= sizeof(buf))
+ ccnt = sizeof(buf);
+
+ ucnt = 0;
+ while (ucnt < ccnt) {
+ lcnt = 0;
+ while ((lcnt + ucnt < ccnt) && (buf[lcnt + ucnt] != '\n')) {
+ lcnt++;
+ }
+ pr_info("%s %.*s\n", hdw->name, lcnt, buf + ucnt);
+ ucnt += lcnt + 1;
+ }
+}
+
+
+/* Evaluate and update the driver's current state, taking various actions
+ as appropriate for the update. */
+static int pvr2_hdw_state_eval(struct pvr2_hdw *hdw)
+{
+ unsigned int st;
+ int state_updated = 0;
+ int callback_flag = 0;
+ int analog_mode;
+
+ pvr2_trace(PVR2_TRACE_STBITS,
+ "Drive state check START");
+ if (pvrusb2_debug & PVR2_TRACE_STBITS) {
+ pvr2_hdw_state_log_state(hdw);
+ }
+
+ /* Process all state and get back over disposition */
+ state_updated = pvr2_hdw_state_update(hdw);
+
+ analog_mode = (hdw->pathway_state != PVR2_PATHWAY_DIGITAL);
+
+ /* Update master state based upon all other states. */
+ if (!hdw->flag_ok) {
+ st = PVR2_STATE_DEAD;
+ } else if (hdw->fw1_state != FW1_STATE_OK) {
+ st = PVR2_STATE_COLD;
+ } else if ((analog_mode ||
+ hdw->hdw_desc->flag_digital_requires_cx23416) &&
+ !hdw->state_encoder_ok) {
+ st = PVR2_STATE_WARM;
+ } else if (hdw->flag_tripped ||
+ (analog_mode && hdw->flag_decoder_missed)) {
+ st = PVR2_STATE_ERROR;
+ } else if (hdw->state_usbstream_run &&
+ (!analog_mode ||
+ (hdw->state_encoder_run && hdw->state_decoder_run))) {
+ st = PVR2_STATE_RUN;
+ } else {
+ st = PVR2_STATE_READY;
+ }
+ if (hdw->master_state != st) {
+ pvr2_trace(PVR2_TRACE_STATE,
+ "Device state change from %s to %s",
+ pvr2_get_state_name(hdw->master_state),
+ pvr2_get_state_name(st));
+ pvr2_led_ctrl(hdw,st == PVR2_STATE_RUN);
+ hdw->master_state = st;
+ state_updated = !0;
+ callback_flag = !0;
+ }
+ if (state_updated) {
+ /* Trigger anyone waiting on any state changes here. */
+ wake_up(&hdw->state_wait_data);
+ }
+
+ if (pvrusb2_debug & PVR2_TRACE_STBITS) {
+ pvr2_hdw_state_log_state(hdw);
+ }
+ pvr2_trace(PVR2_TRACE_STBITS,
+ "Drive state check DONE callback=%d",callback_flag);
+
+ return callback_flag;
+}
+
+
+/* Cause kernel thread to check / update driver state */
+static void pvr2_hdw_state_sched(struct pvr2_hdw *hdw)
+{
+ if (hdw->state_stale) return;
+ hdw->state_stale = !0;
+ trace_stbit("state_stale",hdw->state_stale);
+ schedule_work(&hdw->workpoll);
+}
+
+
+int pvr2_hdw_gpio_get_dir(struct pvr2_hdw *hdw,u32 *dp)
+{
+ return pvr2_read_register(hdw,PVR2_GPIO_DIR,dp);
+}
+
+
+int pvr2_hdw_gpio_get_out(struct pvr2_hdw *hdw,u32 *dp)
+{
+ return pvr2_read_register(hdw,PVR2_GPIO_OUT,dp);
+}
+
+
+int pvr2_hdw_gpio_get_in(struct pvr2_hdw *hdw,u32 *dp)
+{
+ return pvr2_read_register(hdw,PVR2_GPIO_IN,dp);
+}
+
+
+int pvr2_hdw_gpio_chg_dir(struct pvr2_hdw *hdw,u32 msk,u32 val)
+{
+ u32 cval,nval;
+ int ret;
+ if (~msk) {
+ ret = pvr2_read_register(hdw,PVR2_GPIO_DIR,&cval);
+ if (ret) return ret;
+ nval = (cval & ~msk) | (val & msk);
+ pvr2_trace(PVR2_TRACE_GPIO,
+ "GPIO direction changing 0x%x:0x%x from 0x%x to 0x%x",
+ msk,val,cval,nval);
+ } else {
+ nval = val;
+ pvr2_trace(PVR2_TRACE_GPIO,
+ "GPIO direction changing to 0x%x",nval);
+ }
+ return pvr2_write_register(hdw,PVR2_GPIO_DIR,nval);
+}
+
+
+int pvr2_hdw_gpio_chg_out(struct pvr2_hdw *hdw,u32 msk,u32 val)
+{
+ u32 cval,nval;
+ int ret;
+ if (~msk) {
+ ret = pvr2_read_register(hdw,PVR2_GPIO_OUT,&cval);
+ if (ret) return ret;
+ nval = (cval & ~msk) | (val & msk);
+ pvr2_trace(PVR2_TRACE_GPIO,
+ "GPIO output changing 0x%x:0x%x from 0x%x to 0x%x",
+ msk,val,cval,nval);
+ } else {
+ nval = val;
+ pvr2_trace(PVR2_TRACE_GPIO,
+ "GPIO output changing to 0x%x",nval);
+ }
+ return pvr2_write_register(hdw,PVR2_GPIO_OUT,nval);
+}
+
+
+void pvr2_hdw_status_poll(struct pvr2_hdw *hdw)
+{
+ struct v4l2_tuner *vtp = &hdw->tuner_signal_info;
+ memset(vtp, 0, sizeof(*vtp));
+ vtp->type = (hdw->input_val == PVR2_CVAL_INPUT_RADIO) ?
+ V4L2_TUNER_RADIO : V4L2_TUNER_ANALOG_TV;
+ hdw->tuner_signal_stale = 0;
+ /* Note: There apparently is no replacement for VIDIOC_CROPCAP
+ using v4l2-subdev - therefore we can't support that AT ALL right
+ now. (Of course, no sub-drivers seem to implement it either.
+ But now it's a chicken and egg problem...) */
+ v4l2_device_call_all(&hdw->v4l2_dev, 0, tuner, g_tuner, vtp);
+ pvr2_trace(PVR2_TRACE_CHIPS, "subdev status poll type=%u strength=%u audio=0x%x cap=0x%x low=%u hi=%u",
+ vtp->type,
+ vtp->signal, vtp->rxsubchans, vtp->capability,
+ vtp->rangelow, vtp->rangehigh);
+
+ /* We have to do this to avoid getting into constant polling if
+ there's nobody to answer a poll of cropcap info. */
+ hdw->cropcap_stale = 0;
+}
+
+
+unsigned int pvr2_hdw_get_input_available(struct pvr2_hdw *hdw)
+{
+ return hdw->input_avail_mask;
+}
+
+
+unsigned int pvr2_hdw_get_input_allowed(struct pvr2_hdw *hdw)
+{
+ return hdw->input_allowed_mask;
+}
+
+
+static int pvr2_hdw_set_input(struct pvr2_hdw *hdw,int v)
+{
+ if (hdw->input_val != v) {
+ hdw->input_val = v;
+ hdw->input_dirty = !0;
+ }
+
+ /* Handle side effects - if we switch to a mode that needs the RF
+ tuner, then select the right frequency choice as well and mark
+ it dirty. */
+ if (hdw->input_val == PVR2_CVAL_INPUT_RADIO) {
+ hdw->freqSelector = 0;
+ hdw->freqDirty = !0;
+ } else if ((hdw->input_val == PVR2_CVAL_INPUT_TV) ||
+ (hdw->input_val == PVR2_CVAL_INPUT_DTV)) {
+ hdw->freqSelector = 1;
+ hdw->freqDirty = !0;
+ }
+ return 0;
+}
+
+
+int pvr2_hdw_set_input_allowed(struct pvr2_hdw *hdw,
+ unsigned int change_mask,
+ unsigned int change_val)
+{
+ int ret = 0;
+ unsigned int nv,m,idx;
+ LOCK_TAKE(hdw->big_lock);
+ do {
+ nv = hdw->input_allowed_mask & ~change_mask;
+ nv |= (change_val & change_mask);
+ nv &= hdw->input_avail_mask;
+ if (!nv) {
+ /* No legal modes left; return error instead. */
+ ret = -EPERM;
+ break;
+ }
+ hdw->input_allowed_mask = nv;
+ if ((1UL << hdw->input_val) & hdw->input_allowed_mask) {
+ /* Current mode is still in the allowed mask, so
+ we're done. */
+ break;
+ }
+ /* Select and switch to a mode that is still in the allowed
+ mask */
+ if (!hdw->input_allowed_mask) {
+ /* Nothing legal; give up */
+ break;
+ }
+ m = hdw->input_allowed_mask;
+ for (idx = 0; idx < (sizeof(m) << 3); idx++) {
+ if (!((1UL << idx) & m)) continue;
+ pvr2_hdw_set_input(hdw,idx);
+ break;
+ }
+ } while (0);
+ LOCK_GIVE(hdw->big_lock);
+ return ret;
+}
+
+
+/* Find I2C address of eeprom */
+static int pvr2_hdw_get_eeprom_addr(struct pvr2_hdw *hdw)
+{
+ int result;
+ LOCK_TAKE(hdw->ctl_lock); do {
+ hdw->cmd_buffer[0] = FX2CMD_GET_EEPROM_ADDR;
+ result = pvr2_send_request(hdw,
+ hdw->cmd_buffer,1,
+ hdw->cmd_buffer,1);
+ if (result < 0) break;
+ result = hdw->cmd_buffer[0];
+ } while(0); LOCK_GIVE(hdw->ctl_lock);
+ return result;
+}