diff options
Diffstat (limited to 'drivers/mfd/atc260x-core.c')
-rw-r--r-- | drivers/mfd/atc260x-core.c | 307 |
1 files changed, 307 insertions, 0 deletions
diff --git a/drivers/mfd/atc260x-core.c b/drivers/mfd/atc260x-core.c new file mode 100644 index 0000000000..67473b58b0 --- /dev/null +++ b/drivers/mfd/atc260x-core.c @@ -0,0 +1,307 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Core support for ATC260x PMICs + * + * Copyright (C) 2019 Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> + * Copyright (C) 2020 Cristian Ciocaltea <cristian.ciocaltea@gmail.com> + */ + +#include <linux/interrupt.h> +#include <linux/mfd/atc260x/core.h> +#include <linux/mfd/core.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/regmap.h> + +#define ATC260X_CHIP_REV_MAX 31 + +struct atc260x_init_regs { + unsigned int cmu_devrst; + unsigned int cmu_devrst_ints; + unsigned int ints_msk; + unsigned int pad_en; + unsigned int pad_en_extirq; +}; + +static void regmap_lock_mutex(void *__mutex) +{ + struct mutex *mutex = __mutex; + + /* + * Using regmap within an atomic context (e.g. accessing a PMIC when + * powering system down) is normally allowed only if the regmap type + * is MMIO and the regcache type is either REGCACHE_NONE or + * REGCACHE_FLAT. For slow buses like I2C and SPI, the regmap is + * internally protected by a mutex which is acquired non-atomically. + * + * Let's improve this by using a customized locking scheme inspired + * from I2C atomic transfer. See i2c_in_atomic_xfer_mode() for a + * starting point. + */ + if (system_state > SYSTEM_RUNNING && irqs_disabled()) + mutex_trylock(mutex); + else + mutex_lock(mutex); +} + +static void regmap_unlock_mutex(void *__mutex) +{ + struct mutex *mutex = __mutex; + + mutex_unlock(mutex); +} + +static const struct regmap_config atc2603c_regmap_config = { + .reg_bits = 8, + .val_bits = 16, + .max_register = ATC2603C_SADDR, + .cache_type = REGCACHE_NONE, +}; + +static const struct regmap_config atc2609a_regmap_config = { + .reg_bits = 8, + .val_bits = 16, + .max_register = ATC2609A_SADDR, + .cache_type = REGCACHE_NONE, +}; + +static const struct regmap_irq atc2603c_regmap_irqs[] = { + REGMAP_IRQ_REG(ATC2603C_IRQ_AUDIO, 0, ATC2603C_INTS_MSK_AUDIO), + REGMAP_IRQ_REG(ATC2603C_IRQ_OV, 0, ATC2603C_INTS_MSK_OV), + REGMAP_IRQ_REG(ATC2603C_IRQ_OC, 0, ATC2603C_INTS_MSK_OC), + REGMAP_IRQ_REG(ATC2603C_IRQ_OT, 0, ATC2603C_INTS_MSK_OT), + REGMAP_IRQ_REG(ATC2603C_IRQ_UV, 0, ATC2603C_INTS_MSK_UV), + REGMAP_IRQ_REG(ATC2603C_IRQ_ALARM, 0, ATC2603C_INTS_MSK_ALARM), + REGMAP_IRQ_REG(ATC2603C_IRQ_ONOFF, 0, ATC2603C_INTS_MSK_ONOFF), + REGMAP_IRQ_REG(ATC2603C_IRQ_SGPIO, 0, ATC2603C_INTS_MSK_SGPIO), + REGMAP_IRQ_REG(ATC2603C_IRQ_IR, 0, ATC2603C_INTS_MSK_IR), + REGMAP_IRQ_REG(ATC2603C_IRQ_REMCON, 0, ATC2603C_INTS_MSK_REMCON), + REGMAP_IRQ_REG(ATC2603C_IRQ_POWER_IN, 0, ATC2603C_INTS_MSK_POWERIN), +}; + +static const struct regmap_irq atc2609a_regmap_irqs[] = { + REGMAP_IRQ_REG(ATC2609A_IRQ_AUDIO, 0, ATC2609A_INTS_MSK_AUDIO), + REGMAP_IRQ_REG(ATC2609A_IRQ_OV, 0, ATC2609A_INTS_MSK_OV), + REGMAP_IRQ_REG(ATC2609A_IRQ_OC, 0, ATC2609A_INTS_MSK_OC), + REGMAP_IRQ_REG(ATC2609A_IRQ_OT, 0, ATC2609A_INTS_MSK_OT), + REGMAP_IRQ_REG(ATC2609A_IRQ_UV, 0, ATC2609A_INTS_MSK_UV), + REGMAP_IRQ_REG(ATC2609A_IRQ_ALARM, 0, ATC2609A_INTS_MSK_ALARM), + REGMAP_IRQ_REG(ATC2609A_IRQ_ONOFF, 0, ATC2609A_INTS_MSK_ONOFF), + REGMAP_IRQ_REG(ATC2609A_IRQ_WKUP, 0, ATC2609A_INTS_MSK_WKUP), + REGMAP_IRQ_REG(ATC2609A_IRQ_IR, 0, ATC2609A_INTS_MSK_IR), + REGMAP_IRQ_REG(ATC2609A_IRQ_REMCON, 0, ATC2609A_INTS_MSK_REMCON), + REGMAP_IRQ_REG(ATC2609A_IRQ_POWER_IN, 0, ATC2609A_INTS_MSK_POWERIN), +}; + +static const struct regmap_irq_chip atc2603c_regmap_irq_chip = { + .name = "atc2603c", + .irqs = atc2603c_regmap_irqs, + .num_irqs = ARRAY_SIZE(atc2603c_regmap_irqs), + .num_regs = 1, + .status_base = ATC2603C_INTS_PD, + .unmask_base = ATC2603C_INTS_MSK, +}; + +static const struct regmap_irq_chip atc2609a_regmap_irq_chip = { + .name = "atc2609a", + .irqs = atc2609a_regmap_irqs, + .num_irqs = ARRAY_SIZE(atc2609a_regmap_irqs), + .num_regs = 1, + .status_base = ATC2609A_INTS_PD, + .unmask_base = ATC2609A_INTS_MSK, +}; + +static const struct resource atc2603c_onkey_resources[] = { + DEFINE_RES_IRQ(ATC2603C_IRQ_ONOFF), +}; + +static const struct resource atc2609a_onkey_resources[] = { + DEFINE_RES_IRQ(ATC2609A_IRQ_ONOFF), +}; + +static const struct mfd_cell atc2603c_mfd_cells[] = { + { .name = "atc260x-regulator" }, + { .name = "atc260x-pwrc" }, + { + .name = "atc260x-onkey", + .num_resources = ARRAY_SIZE(atc2603c_onkey_resources), + .resources = atc2603c_onkey_resources, + }, +}; + +static const struct mfd_cell atc2609a_mfd_cells[] = { + { .name = "atc260x-regulator" }, + { .name = "atc260x-pwrc" }, + { + .name = "atc260x-onkey", + .num_resources = ARRAY_SIZE(atc2609a_onkey_resources), + .resources = atc2609a_onkey_resources, + }, +}; + +static const struct atc260x_init_regs atc2603c_init_regs = { + .cmu_devrst = ATC2603C_CMU_DEVRST, + .cmu_devrst_ints = ATC2603C_CMU_DEVRST_INTS, + .ints_msk = ATC2603C_INTS_MSK, + .pad_en = ATC2603C_PAD_EN, + .pad_en_extirq = ATC2603C_PAD_EN_EXTIRQ, +}; + +static const struct atc260x_init_regs atc2609a_init_regs = { + .cmu_devrst = ATC2609A_CMU_DEVRST, + .cmu_devrst_ints = ATC2609A_CMU_DEVRST_INTS, + .ints_msk = ATC2609A_INTS_MSK, + .pad_en = ATC2609A_PAD_EN, + .pad_en_extirq = ATC2609A_PAD_EN_EXTIRQ, +}; + +static void atc260x_cmu_reset(struct atc260x *atc260x) +{ + const struct atc260x_init_regs *regs = atc260x->init_regs; + + /* Assert reset */ + regmap_update_bits(atc260x->regmap, regs->cmu_devrst, + regs->cmu_devrst_ints, ~regs->cmu_devrst_ints); + + /* De-assert reset */ + regmap_update_bits(atc260x->regmap, regs->cmu_devrst, + regs->cmu_devrst_ints, regs->cmu_devrst_ints); +} + +static void atc260x_dev_init(struct atc260x *atc260x) +{ + const struct atc260x_init_regs *regs = atc260x->init_regs; + + /* Initialize interrupt block */ + atc260x_cmu_reset(atc260x); + + /* Disable all interrupt sources */ + regmap_write(atc260x->regmap, regs->ints_msk, 0); + + /* Enable EXTIRQ pad */ + regmap_update_bits(atc260x->regmap, regs->pad_en, + regs->pad_en_extirq, regs->pad_en_extirq); +} + +/** + * atc260x_match_device(): Setup ATC260x variant related fields + * + * @atc260x: ATC260x device to setup (.dev field must be set) + * @regmap_cfg: regmap config associated with this ATC260x device + * + * This lets the ATC260x core configure the MFD cells and register maps + * for later use. + */ +int atc260x_match_device(struct atc260x *atc260x, struct regmap_config *regmap_cfg) +{ + struct device *dev = atc260x->dev; + const void *of_data; + + of_data = of_device_get_match_data(dev); + if (!of_data) + return -ENODEV; + + atc260x->ic_type = (unsigned long)of_data; + + switch (atc260x->ic_type) { + case ATC2603C: + *regmap_cfg = atc2603c_regmap_config; + atc260x->regmap_irq_chip = &atc2603c_regmap_irq_chip; + atc260x->cells = atc2603c_mfd_cells; + atc260x->nr_cells = ARRAY_SIZE(atc2603c_mfd_cells); + atc260x->type_name = "atc2603c"; + atc260x->rev_reg = ATC2603C_CHIP_VER; + atc260x->init_regs = &atc2603c_init_regs; + break; + case ATC2609A: + *regmap_cfg = atc2609a_regmap_config; + atc260x->regmap_irq_chip = &atc2609a_regmap_irq_chip; + atc260x->cells = atc2609a_mfd_cells; + atc260x->nr_cells = ARRAY_SIZE(atc2609a_mfd_cells); + atc260x->type_name = "atc2609a"; + atc260x->rev_reg = ATC2609A_CHIP_VER; + atc260x->init_regs = &atc2609a_init_regs; + break; + default: + dev_err(dev, "Unsupported ATC260x device type: %u\n", + atc260x->ic_type); + return -EINVAL; + } + + atc260x->regmap_mutex = devm_kzalloc(dev, sizeof(*atc260x->regmap_mutex), + GFP_KERNEL); + if (!atc260x->regmap_mutex) + return -ENOMEM; + + mutex_init(atc260x->regmap_mutex); + + regmap_cfg->lock = regmap_lock_mutex, + regmap_cfg->unlock = regmap_unlock_mutex, + regmap_cfg->lock_arg = atc260x->regmap_mutex; + + return 0; +} +EXPORT_SYMBOL_GPL(atc260x_match_device); + +/** + * atc260x_device_probe(): Probe a configured ATC260x device + * + * @atc260x: ATC260x device to probe (must be configured) + * + * This function lets the ATC260x core register the ATC260x MFD devices + * and IRQCHIP. The ATC260x device passed in must be fully configured + * with atc260x_match_device, its IRQ set, and regmap created. + */ +int atc260x_device_probe(struct atc260x *atc260x) +{ + struct device *dev = atc260x->dev; + unsigned int chip_rev; + int ret; + + if (!atc260x->irq) { + dev_err(dev, "No interrupt support\n"); + return -EINVAL; + } + + /* Initialize the hardware */ + atc260x_dev_init(atc260x); + + ret = regmap_read(atc260x->regmap, atc260x->rev_reg, &chip_rev); + if (ret) { + dev_err(dev, "Failed to get chip revision\n"); + return ret; + } + + if (chip_rev > ATC260X_CHIP_REV_MAX) { + dev_err(dev, "Unknown chip revision: %u\n", chip_rev); + return -EINVAL; + } + + atc260x->ic_ver = __ffs(chip_rev + 1U); + + dev_info(dev, "Detected chip type %s rev.%c\n", + atc260x->type_name, 'A' + atc260x->ic_ver); + + ret = devm_regmap_add_irq_chip(dev, atc260x->regmap, atc260x->irq, IRQF_ONESHOT, + -1, atc260x->regmap_irq_chip, &atc260x->irq_data); + if (ret) { + dev_err(dev, "Failed to add IRQ chip: %d\n", ret); + return ret; + } + + ret = devm_mfd_add_devices(dev, PLATFORM_DEVID_NONE, + atc260x->cells, atc260x->nr_cells, NULL, 0, + regmap_irq_get_domain(atc260x->irq_data)); + if (ret) { + dev_err(dev, "Failed to add child devices: %d\n", ret); + regmap_del_irq_chip(atc260x->irq, atc260x->irq_data); + } + + return ret; +} +EXPORT_SYMBOL_GPL(atc260x_device_probe); + +MODULE_DESCRIPTION("ATC260x PMICs Core support"); +MODULE_AUTHOR("Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>"); +MODULE_AUTHOR("Cristian Ciocaltea <cristian.ciocaltea@gmail.com>"); +MODULE_LICENSE("GPL"); |