diff options
Diffstat (limited to 'drivers/mfd/kempld-core.c')
-rw-r--r-- | drivers/mfd/kempld-core.c | 983 |
1 files changed, 983 insertions, 0 deletions
diff --git a/drivers/mfd/kempld-core.c b/drivers/mfd/kempld-core.c new file mode 100644 index 0000000000..33c6cfe9fe --- /dev/null +++ b/drivers/mfd/kempld-core.c @@ -0,0 +1,983 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Kontron PLD MFD core driver + * + * Copyright (c) 2010-2013 Kontron Europe GmbH + * Author: Michael Brunner <michael.brunner@kontron.com> + */ + +#include <linux/platform_device.h> +#include <linux/mfd/core.h> +#include <linux/mfd/kempld.h> +#include <linux/module.h> +#include <linux/dmi.h> +#include <linux/io.h> +#include <linux/delay.h> +#include <linux/acpi.h> + +#define MAX_ID_LEN 4 +static char force_device_id[MAX_ID_LEN + 1] = ""; +module_param_string(force_device_id, force_device_id, + sizeof(force_device_id), 0); +MODULE_PARM_DESC(force_device_id, "Override detected product"); + +/* + * Get hardware mutex to block firmware from accessing the pld. + * It is possible for the firmware may hold the mutex for an extended length of + * time. This function will block until access has been granted. + */ +static void kempld_get_hardware_mutex(struct kempld_device_data *pld) +{ + /* The mutex bit will read 1 until access has been granted */ + while (ioread8(pld->io_index) & KEMPLD_MUTEX_KEY) + usleep_range(1000, 3000); +} + +static void kempld_release_hardware_mutex(struct kempld_device_data *pld) +{ + /* The harware mutex is released when 1 is written to the mutex bit. */ + iowrite8(KEMPLD_MUTEX_KEY, pld->io_index); +} + +static int kempld_get_info_generic(struct kempld_device_data *pld) +{ + u16 version; + u8 spec; + + kempld_get_mutex(pld); + + version = kempld_read16(pld, KEMPLD_VERSION); + spec = kempld_read8(pld, KEMPLD_SPEC); + pld->info.buildnr = kempld_read16(pld, KEMPLD_BUILDNR); + + pld->info.minor = KEMPLD_VERSION_GET_MINOR(version); + pld->info.major = KEMPLD_VERSION_GET_MAJOR(version); + pld->info.number = KEMPLD_VERSION_GET_NUMBER(version); + pld->info.type = KEMPLD_VERSION_GET_TYPE(version); + + if (spec == 0xff) { + pld->info.spec_minor = 0; + pld->info.spec_major = 1; + } else { + pld->info.spec_minor = KEMPLD_SPEC_GET_MINOR(spec); + pld->info.spec_major = KEMPLD_SPEC_GET_MAJOR(spec); + } + + if (pld->info.spec_major > 0) + pld->feature_mask = kempld_read16(pld, KEMPLD_FEATURE); + else + pld->feature_mask = 0; + + kempld_release_mutex(pld); + + return 0; +} + +enum kempld_cells { + KEMPLD_I2C = 0, + KEMPLD_WDT, + KEMPLD_GPIO, + KEMPLD_UART, +}; + +static const char *kempld_dev_names[] = { + [KEMPLD_I2C] = "kempld-i2c", + [KEMPLD_WDT] = "kempld-wdt", + [KEMPLD_GPIO] = "kempld-gpio", + [KEMPLD_UART] = "kempld-uart", +}; + +#define KEMPLD_MAX_DEVS ARRAY_SIZE(kempld_dev_names) + +static int kempld_register_cells_generic(struct kempld_device_data *pld) +{ + struct mfd_cell devs[KEMPLD_MAX_DEVS] = {}; + int i = 0; + + if (pld->feature_mask & KEMPLD_FEATURE_BIT_I2C) + devs[i++].name = kempld_dev_names[KEMPLD_I2C]; + + if (pld->feature_mask & KEMPLD_FEATURE_BIT_WATCHDOG) + devs[i++].name = kempld_dev_names[KEMPLD_WDT]; + + if (pld->feature_mask & KEMPLD_FEATURE_BIT_GPIO) + devs[i++].name = kempld_dev_names[KEMPLD_GPIO]; + + if (pld->feature_mask & KEMPLD_FEATURE_MASK_UART) + devs[i++].name = kempld_dev_names[KEMPLD_UART]; + + return mfd_add_devices(pld->dev, -1, devs, i, NULL, 0, NULL); +} + +static struct resource kempld_ioresource = { + .start = KEMPLD_IOINDEX, + .end = KEMPLD_IODATA, + .flags = IORESOURCE_IO, +}; + +static const struct kempld_platform_data kempld_platform_data_generic = { + .pld_clock = KEMPLD_CLK, + .ioresource = &kempld_ioresource, + .get_hardware_mutex = kempld_get_hardware_mutex, + .release_hardware_mutex = kempld_release_hardware_mutex, + .get_info = kempld_get_info_generic, + .register_cells = kempld_register_cells_generic, +}; + +static struct platform_device *kempld_pdev; + +static int kempld_create_platform_device(const struct dmi_system_id *id) +{ + const struct kempld_platform_data *pdata = id->driver_data; + int ret; + + kempld_pdev = platform_device_alloc("kempld", -1); + if (!kempld_pdev) + return -ENOMEM; + + ret = platform_device_add_data(kempld_pdev, pdata, sizeof(*pdata)); + if (ret) + goto err; + + ret = platform_device_add_resources(kempld_pdev, pdata->ioresource, 1); + if (ret) + goto err; + + ret = platform_device_add(kempld_pdev); + if (ret) + goto err; + + return 0; +err: + platform_device_put(kempld_pdev); + return ret; +} + +/** + * kempld_read8 - read 8 bit register + * @pld: kempld_device_data structure describing the PLD + * @index: register index on the chip + * + * kempld_get_mutex must be called prior to calling this function. + */ +u8 kempld_read8(struct kempld_device_data *pld, u8 index) +{ + iowrite8(index, pld->io_index); + return ioread8(pld->io_data); +} +EXPORT_SYMBOL_GPL(kempld_read8); + +/** + * kempld_write8 - write 8 bit register + * @pld: kempld_device_data structure describing the PLD + * @index: register index on the chip + * @data: new register value + * + * kempld_get_mutex must be called prior to calling this function. + */ +void kempld_write8(struct kempld_device_data *pld, u8 index, u8 data) +{ + iowrite8(index, pld->io_index); + iowrite8(data, pld->io_data); +} +EXPORT_SYMBOL_GPL(kempld_write8); + +/** + * kempld_read16 - read 16 bit register + * @pld: kempld_device_data structure describing the PLD + * @index: register index on the chip + * + * kempld_get_mutex must be called prior to calling this function. + */ +u16 kempld_read16(struct kempld_device_data *pld, u8 index) +{ + return kempld_read8(pld, index) | kempld_read8(pld, index + 1) << 8; +} +EXPORT_SYMBOL_GPL(kempld_read16); + +/** + * kempld_write16 - write 16 bit register + * @pld: kempld_device_data structure describing the PLD + * @index: register index on the chip + * @data: new register value + * + * kempld_get_mutex must be called prior to calling this function. + */ +void kempld_write16(struct kempld_device_data *pld, u8 index, u16 data) +{ + kempld_write8(pld, index, (u8)data); + kempld_write8(pld, index + 1, (u8)(data >> 8)); +} +EXPORT_SYMBOL_GPL(kempld_write16); + +/** + * kempld_read32 - read 32 bit register + * @pld: kempld_device_data structure describing the PLD + * @index: register index on the chip + * + * kempld_get_mutex must be called prior to calling this function. + */ +u32 kempld_read32(struct kempld_device_data *pld, u8 index) +{ + return kempld_read16(pld, index) | kempld_read16(pld, index + 2) << 16; +} +EXPORT_SYMBOL_GPL(kempld_read32); + +/** + * kempld_write32 - write 32 bit register + * @pld: kempld_device_data structure describing the PLD + * @index: register index on the chip + * @data: new register value + * + * kempld_get_mutex must be called prior to calling this function. + */ +void kempld_write32(struct kempld_device_data *pld, u8 index, u32 data) +{ + kempld_write16(pld, index, (u16)data); + kempld_write16(pld, index + 2, (u16)(data >> 16)); +} +EXPORT_SYMBOL_GPL(kempld_write32); + +/** + * kempld_get_mutex - acquire PLD mutex + * @pld: kempld_device_data structure describing the PLD + */ +void kempld_get_mutex(struct kempld_device_data *pld) +{ + const struct kempld_platform_data *pdata = dev_get_platdata(pld->dev); + + mutex_lock(&pld->lock); + pdata->get_hardware_mutex(pld); +} +EXPORT_SYMBOL_GPL(kempld_get_mutex); + +/** + * kempld_release_mutex - release PLD mutex + * @pld: kempld_device_data structure describing the PLD + */ +void kempld_release_mutex(struct kempld_device_data *pld) +{ + const struct kempld_platform_data *pdata = dev_get_platdata(pld->dev); + + pdata->release_hardware_mutex(pld); + mutex_unlock(&pld->lock); +} +EXPORT_SYMBOL_GPL(kempld_release_mutex); + +/** + * kempld_get_info - update device specific information + * @pld: kempld_device_data structure describing the PLD + * + * This function calls the configured board specific kempld_get_info_XXXX + * function which is responsible for gathering information about the specific + * hardware. The information is then stored within the pld structure. + */ +static int kempld_get_info(struct kempld_device_data *pld) +{ + int ret; + const struct kempld_platform_data *pdata = dev_get_platdata(pld->dev); + char major, minor; + + ret = pdata->get_info(pld); + if (ret) + return ret; + + /* The Kontron PLD firmware version string has the following format: + * Pwxy.zzzz + * P: Fixed + * w: PLD number - 1 hex digit + * x: Major version - 1 alphanumerical digit (0-9A-V) + * y: Minor version - 1 alphanumerical digit (0-9A-V) + * zzzz: Build number - 4 zero padded hex digits */ + + if (pld->info.major < 10) + major = pld->info.major + '0'; + else + major = (pld->info.major - 10) + 'A'; + if (pld->info.minor < 10) + minor = pld->info.minor + '0'; + else + minor = (pld->info.minor - 10) + 'A'; + + ret = scnprintf(pld->info.version, sizeof(pld->info.version), + "P%X%c%c.%04X", pld->info.number, major, minor, + pld->info.buildnr); + if (ret < 0) + return ret; + + return 0; +} + +/* + * kempld_register_cells - register cell drivers + * + * This function registers cell drivers for the detected hardware by calling + * the configured kempld_register_cells_XXXX function which is responsible + * to detect and register the needed cell drivers. + */ +static int kempld_register_cells(struct kempld_device_data *pld) +{ + const struct kempld_platform_data *pdata = dev_get_platdata(pld->dev); + + return pdata->register_cells(pld); +} + +static const char *kempld_get_type_string(struct kempld_device_data *pld) +{ + const char *version_type; + + switch (pld->info.type) { + case 0: + version_type = "release"; + break; + case 1: + version_type = "debug"; + break; + case 2: + version_type = "custom"; + break; + default: + version_type = "unspecified"; + break; + } + + return version_type; +} + +static ssize_t pld_version_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct kempld_device_data *pld = dev_get_drvdata(dev); + + return sysfs_emit(buf, "%s\n", pld->info.version); +} + +static ssize_t pld_specification_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct kempld_device_data *pld = dev_get_drvdata(dev); + + return sysfs_emit(buf, "%d.%d\n", pld->info.spec_major, pld->info.spec_minor); +} + +static ssize_t pld_type_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct kempld_device_data *pld = dev_get_drvdata(dev); + + return sysfs_emit(buf, "%s\n", kempld_get_type_string(pld)); +} + +static DEVICE_ATTR_RO(pld_version); +static DEVICE_ATTR_RO(pld_specification); +static DEVICE_ATTR_RO(pld_type); + +static struct attribute *pld_attributes[] = { + &dev_attr_pld_version.attr, + &dev_attr_pld_specification.attr, + &dev_attr_pld_type.attr, + NULL +}; + +static const struct attribute_group pld_attr_group = { + .attrs = pld_attributes, +}; + +static int kempld_detect_device(struct kempld_device_data *pld) +{ + u8 index_reg; + int ret; + + mutex_lock(&pld->lock); + + /* Check for empty IO space */ + index_reg = ioread8(pld->io_index); + if (index_reg == 0xff && ioread8(pld->io_data) == 0xff) { + mutex_unlock(&pld->lock); + return -ENODEV; + } + + /* Release hardware mutex if acquired */ + if (!(index_reg & KEMPLD_MUTEX_KEY)) { + iowrite8(KEMPLD_MUTEX_KEY, pld->io_index); + /* PXT and COMe-cPC2 boards may require a second release */ + iowrite8(KEMPLD_MUTEX_KEY, pld->io_index); + } + + mutex_unlock(&pld->lock); + + ret = kempld_get_info(pld); + if (ret) + return ret; + + dev_info(pld->dev, "Found Kontron PLD - %s (%s), spec %d.%d\n", + pld->info.version, kempld_get_type_string(pld), + pld->info.spec_major, pld->info.spec_minor); + + ret = sysfs_create_group(&pld->dev->kobj, &pld_attr_group); + if (ret) + return ret; + + ret = kempld_register_cells(pld); + if (ret) + sysfs_remove_group(&pld->dev->kobj, &pld_attr_group); + + return ret; +} + +#ifdef CONFIG_ACPI +static int kempld_get_acpi_data(struct platform_device *pdev) +{ + struct list_head resource_list; + struct resource *resources; + struct resource_entry *rentry; + struct device *dev = &pdev->dev; + struct acpi_device *acpi_dev = ACPI_COMPANION(dev); + const struct kempld_platform_data *pdata; + int ret; + int count; + + pdata = acpi_device_get_match_data(dev); + ret = platform_device_add_data(pdev, pdata, + sizeof(struct kempld_platform_data)); + if (ret) + return ret; + + INIT_LIST_HEAD(&resource_list); + ret = acpi_dev_get_resources(acpi_dev, &resource_list, NULL, NULL); + if (ret < 0) + goto out; + + count = ret; + + if (count == 0) { + ret = platform_device_add_resources(pdev, pdata->ioresource, 1); + goto out; + } + + resources = devm_kcalloc(&acpi_dev->dev, count, sizeof(*resources), + GFP_KERNEL); + if (!resources) { + ret = -ENOMEM; + goto out; + } + + count = 0; + list_for_each_entry(rentry, &resource_list, node) { + memcpy(&resources[count], rentry->res, + sizeof(*resources)); + count++; + } + ret = platform_device_add_resources(pdev, resources, count); + +out: + acpi_dev_free_resource_list(&resource_list); + + return ret; +} +#else +static int kempld_get_acpi_data(struct platform_device *pdev) +{ + return -ENODEV; +} +#endif /* CONFIG_ACPI */ + +static int kempld_probe(struct platform_device *pdev) +{ + const struct kempld_platform_data *pdata; + struct device *dev = &pdev->dev; + struct kempld_device_data *pld; + struct resource *ioport; + int ret; + + if (kempld_pdev == NULL) { + /* + * No kempld_pdev device has been registered in kempld_init, + * so we seem to be probing an ACPI platform device. + */ + ret = kempld_get_acpi_data(pdev); + if (ret) + return ret; + } else if (kempld_pdev != pdev) { + /* + * The platform device we are probing is not the one we + * registered in kempld_init using the DMI table, so this one + * comes from ACPI. + * As we can only probe one - abort here and use the DMI + * based one instead. + */ + dev_notice(dev, "platform device exists - not using ACPI\n"); + return -ENODEV; + } + pdata = dev_get_platdata(dev); + + pld = devm_kzalloc(dev, sizeof(*pld), GFP_KERNEL); + if (!pld) + return -ENOMEM; + + ioport = platform_get_resource(pdev, IORESOURCE_IO, 0); + if (!ioport) + return -EINVAL; + + pld->io_base = devm_ioport_map(dev, ioport->start, + resource_size(ioport)); + if (!pld->io_base) + return -ENOMEM; + + pld->io_index = pld->io_base; + pld->io_data = pld->io_base + 1; + pld->pld_clock = pdata->pld_clock; + pld->dev = dev; + + mutex_init(&pld->lock); + platform_set_drvdata(pdev, pld); + + return kempld_detect_device(pld); +} + +static int kempld_remove(struct platform_device *pdev) +{ + struct kempld_device_data *pld = platform_get_drvdata(pdev); + const struct kempld_platform_data *pdata = dev_get_platdata(pld->dev); + + sysfs_remove_group(&pld->dev->kobj, &pld_attr_group); + + mfd_remove_devices(&pdev->dev); + pdata->release_hardware_mutex(pld); + + return 0; +} + +#ifdef CONFIG_ACPI +static const struct acpi_device_id kempld_acpi_table[] = { + { "KEM0000", (kernel_ulong_t)&kempld_platform_data_generic }, + { "KEM0001", (kernel_ulong_t)&kempld_platform_data_generic }, + {} +}; +MODULE_DEVICE_TABLE(acpi, kempld_acpi_table); +#endif + +static struct platform_driver kempld_driver = { + .driver = { + .name = "kempld", + .acpi_match_table = ACPI_PTR(kempld_acpi_table), + }, + .probe = kempld_probe, + .remove = kempld_remove, +}; + +static const struct dmi_system_id kempld_dmi_table[] __initconst = { + { + .ident = "BBD6", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"), + DMI_MATCH(DMI_BOARD_NAME, "COMe-bBD"), + }, + .driver_data = (void *)&kempld_platform_data_generic, + .callback = kempld_create_platform_device, + }, { + .ident = "BBL6", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"), + DMI_MATCH(DMI_BOARD_NAME, "COMe-bBL6"), + }, + .driver_data = (void *)&kempld_platform_data_generic, + .callback = kempld_create_platform_device, + }, { + .ident = "BDV7", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"), + DMI_MATCH(DMI_BOARD_NAME, "COMe-bDV7"), + }, + .driver_data = (void *)&kempld_platform_data_generic, + .callback = kempld_create_platform_device, + }, { + .ident = "BHL6", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"), + DMI_MATCH(DMI_BOARD_NAME, "COMe-bHL6"), + }, + .driver_data = (void *)&kempld_platform_data_generic, + .callback = kempld_create_platform_device, + }, { + .ident = "BKL6", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"), + DMI_MATCH(DMI_BOARD_NAME, "COMe-bKL6"), + }, + .driver_data = (void *)&kempld_platform_data_generic, + .callback = kempld_create_platform_device, + }, { + .ident = "BSL6", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"), + DMI_MATCH(DMI_BOARD_NAME, "COMe-bSL6"), + }, + .driver_data = (void *)&kempld_platform_data_generic, + .callback = kempld_create_platform_device, + }, { + .ident = "CAL6", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"), + DMI_MATCH(DMI_BOARD_NAME, "COMe-cAL"), + }, + .driver_data = (void *)&kempld_platform_data_generic, + .callback = kempld_create_platform_device, + }, { + .ident = "CBL6", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"), + DMI_MATCH(DMI_BOARD_NAME, "COMe-cBL6"), + }, + .driver_data = (void *)&kempld_platform_data_generic, + .callback = kempld_create_platform_device, + }, { + .ident = "CBW6", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"), + DMI_MATCH(DMI_BOARD_NAME, "COMe-cBW6"), + }, + .driver_data = (void *)&kempld_platform_data_generic, + .callback = kempld_create_platform_device, + }, { + .ident = "CCR2", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"), + DMI_MATCH(DMI_BOARD_NAME, "COMe-bIP2"), + }, + .driver_data = (void *)&kempld_platform_data_generic, + .callback = kempld_create_platform_device, + }, { + .ident = "CCR6", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"), + DMI_MATCH(DMI_BOARD_NAME, "COMe-bIP6"), + }, + .driver_data = (void *)&kempld_platform_data_generic, + .callback = kempld_create_platform_device, + }, { + .ident = "CDV7", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"), + DMI_MATCH(DMI_BOARD_NAME, "COMe-cDV7"), + }, + .driver_data = (void *)&kempld_platform_data_generic, + .callback = kempld_create_platform_device, + }, { + .ident = "CHL6", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"), + DMI_MATCH(DMI_BOARD_NAME, "COMe-cHL6"), + }, + .driver_data = (void *)&kempld_platform_data_generic, + .callback = kempld_create_platform_device, + }, { + .ident = "CHR2", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"), + DMI_MATCH(DMI_BOARD_NAME, "ETXexpress-SC T2"), + }, + .driver_data = (void *)&kempld_platform_data_generic, + .callback = kempld_create_platform_device, + }, { + .ident = "CHR2", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"), + DMI_MATCH(DMI_BOARD_NAME, "ETXe-SC T2"), + }, + .driver_data = (void *)&kempld_platform_data_generic, + .callback = kempld_create_platform_device, + }, { + .ident = "CHR2", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"), + DMI_MATCH(DMI_BOARD_NAME, "COMe-bSC2"), + }, + .driver_data = (void *)&kempld_platform_data_generic, + .callback = kempld_create_platform_device, + }, { + .ident = "CHR6", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"), + DMI_MATCH(DMI_BOARD_NAME, "ETXexpress-SC T6"), + }, + .driver_data = (void *)&kempld_platform_data_generic, + .callback = kempld_create_platform_device, + }, { + .ident = "CHR6", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"), + DMI_MATCH(DMI_BOARD_NAME, "ETXe-SC T6"), + }, + .driver_data = (void *)&kempld_platform_data_generic, + .callback = kempld_create_platform_device, + }, { + .ident = "CHR6", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"), + DMI_MATCH(DMI_BOARD_NAME, "COMe-bSC6"), + }, + .driver_data = (void *)&kempld_platform_data_generic, + .callback = kempld_create_platform_device, + }, { + .ident = "CKL6", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"), + DMI_MATCH(DMI_BOARD_NAME, "COMe-cKL6"), + }, + .driver_data = (void *)&kempld_platform_data_generic, + .callback = kempld_create_platform_device, + }, { + .ident = "CNTG", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"), + DMI_MATCH(DMI_BOARD_NAME, "ETXexpress-PC"), + }, + .driver_data = (void *)&kempld_platform_data_generic, + .callback = kempld_create_platform_device, + }, { + .ident = "CNTG", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"), + DMI_MATCH(DMI_BOARD_NAME, "COMe-bPC2"), + }, + .driver_data = (void *)&kempld_platform_data_generic, + .callback = kempld_create_platform_device, + }, { + .ident = "CNTX", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"), + DMI_MATCH(DMI_BOARD_NAME, "PXT"), + }, + .driver_data = (void *)&kempld_platform_data_generic, + .callback = kempld_create_platform_device, + }, { + .ident = "CSL6", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"), + DMI_MATCH(DMI_BOARD_NAME, "COMe-cSL6"), + }, + .driver_data = (void *)&kempld_platform_data_generic, + .callback = kempld_create_platform_device, + }, { + .ident = "CVV6", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"), + DMI_MATCH(DMI_BOARD_NAME, "COMe-cBT"), + }, + .driver_data = (void *)&kempld_platform_data_generic, + .callback = kempld_create_platform_device, + }, { + .ident = "FRI2", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"), + DMI_MATCH(DMI_BIOS_VERSION, "FRI2"), + }, + .driver_data = (void *)&kempld_platform_data_generic, + .callback = kempld_create_platform_device, + }, { + .ident = "FRI2", + .matches = { + DMI_MATCH(DMI_PRODUCT_NAME, "Fish River Island II"), + }, + .driver_data = (void *)&kempld_platform_data_generic, + .callback = kempld_create_platform_device, + }, { + .ident = "A203", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"), + DMI_MATCH(DMI_BOARD_NAME, "KBox A-203"), + }, + .driver_data = (void *)&kempld_platform_data_generic, + .callback = kempld_create_platform_device, + }, { + .ident = "M4A1", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"), + DMI_MATCH(DMI_BOARD_NAME, "COMe-m4AL"), + }, + .driver_data = (void *)&kempld_platform_data_generic, + .callback = kempld_create_platform_device, + }, { + .ident = "MAL1", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"), + DMI_MATCH(DMI_BOARD_NAME, "COMe-mAL10"), + }, + .driver_data = (void *)&kempld_platform_data_generic, + .callback = kempld_create_platform_device, + }, { + .ident = "MAPL", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"), + DMI_MATCH(DMI_BOARD_NAME, "mITX-APL"), + }, + .driver_data = (void *)&kempld_platform_data_generic, + .callback = kempld_create_platform_device, + }, { + .ident = "MBR1", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"), + DMI_MATCH(DMI_BOARD_NAME, "ETX-OH"), + }, + .driver_data = (void *)&kempld_platform_data_generic, + .callback = kempld_create_platform_device, + }, { + .ident = "MVV1", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"), + DMI_MATCH(DMI_BOARD_NAME, "COMe-mBT"), + }, + .driver_data = (void *)&kempld_platform_data_generic, + .callback = kempld_create_platform_device, + }, { + .ident = "NTC1", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"), + DMI_MATCH(DMI_BOARD_NAME, "nanoETXexpress-TT"), + }, + .driver_data = (void *)&kempld_platform_data_generic, + .callback = kempld_create_platform_device, + }, { + .ident = "NTC1", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"), + DMI_MATCH(DMI_BOARD_NAME, "nETXe-TT"), + }, + .driver_data = (void *)&kempld_platform_data_generic, + .callback = kempld_create_platform_device, + }, { + .ident = "NTC1", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"), + DMI_MATCH(DMI_BOARD_NAME, "COMe-mTT"), + }, + .driver_data = (void *)&kempld_platform_data_generic, + .callback = kempld_create_platform_device, + }, { + .ident = "NUP1", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"), + DMI_MATCH(DMI_BOARD_NAME, "COMe-mCT"), + }, + .driver_data = (void *)&kempld_platform_data_generic, + .callback = kempld_create_platform_device, + }, { + .ident = "PAPL", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"), + DMI_MATCH(DMI_BOARD_NAME, "pITX-APL"), + }, + .driver_data = (void *)&kempld_platform_data_generic, + .callback = kempld_create_platform_device, + }, { + .ident = "SXAL", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"), + DMI_MATCH(DMI_BOARD_NAME, "SMARC-sXAL"), + }, + .driver_data = (void *)&kempld_platform_data_generic, + .callback = kempld_create_platform_device, + }, { + .ident = "SXAL4", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"), + DMI_MATCH(DMI_BOARD_NAME, "SMARC-sXA4"), + }, + .driver_data = (void *)&kempld_platform_data_generic, + .callback = kempld_create_platform_device, + }, { + .ident = "UNP1", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"), + DMI_MATCH(DMI_BOARD_NAME, "microETXexpress-DC"), + }, + .driver_data = (void *)&kempld_platform_data_generic, + .callback = kempld_create_platform_device, + }, { + .ident = "UNP1", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"), + DMI_MATCH(DMI_BOARD_NAME, "COMe-cDC2"), + }, + .driver_data = (void *)&kempld_platform_data_generic, + .callback = kempld_create_platform_device, + }, { + .ident = "UNTG", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"), + DMI_MATCH(DMI_BOARD_NAME, "microETXexpress-PC"), + }, + .driver_data = (void *)&kempld_platform_data_generic, + .callback = kempld_create_platform_device, + }, { + .ident = "UNTG", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"), + DMI_MATCH(DMI_BOARD_NAME, "COMe-cPC2"), + }, + .driver_data = (void *)&kempld_platform_data_generic, + .callback = kempld_create_platform_device, + }, { + .ident = "UUP6", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"), + DMI_MATCH(DMI_BOARD_NAME, "COMe-cCT6"), + }, + .driver_data = (void *)&kempld_platform_data_generic, + .callback = kempld_create_platform_device, + }, { + .ident = "UTH6", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"), + DMI_MATCH(DMI_BOARD_NAME, "COMe-cTH6"), + }, + .driver_data = (void *)&kempld_platform_data_generic, + .callback = kempld_create_platform_device, + }, { + .ident = "Q7AL", + .matches = { + DMI_MATCH(DMI_BOARD_VENDOR, "Kontron"), + DMI_MATCH(DMI_BOARD_NAME, "Qseven-Q7AL"), + }, + .driver_data = (void *)&kempld_platform_data_generic, + .callback = kempld_create_platform_device, + }, + {} +}; +MODULE_DEVICE_TABLE(dmi, kempld_dmi_table); + +static int __init kempld_init(void) +{ + const struct dmi_system_id *id; + + if (force_device_id[0]) { + for (id = kempld_dmi_table; + id->matches[0].slot != DMI_NONE; id++) + if (strstr(id->ident, force_device_id)) + if (id->callback && !id->callback(id)) + break; + if (id->matches[0].slot == DMI_NONE) + return -ENODEV; + } else { + dmi_check_system(kempld_dmi_table); + } + + return platform_driver_register(&kempld_driver); +} + +static void __exit kempld_exit(void) +{ + if (kempld_pdev) + platform_device_unregister(kempld_pdev); + + platform_driver_unregister(&kempld_driver); +} + +module_init(kempld_init); +module_exit(kempld_exit); + +MODULE_DESCRIPTION("KEM PLD Core Driver"); +MODULE_AUTHOR("Michael Brunner <michael.brunner@kontron.com>"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:kempld-core"); |