diff options
Diffstat (limited to 'drivers/misc/bcm-vk/bcm_vk.h')
| -rw-r--r-- | drivers/misc/bcm-vk/bcm_vk.h | 549 |
1 files changed, 549 insertions, 0 deletions
diff --git a/drivers/misc/bcm-vk/bcm_vk.h b/drivers/misc/bcm-vk/bcm_vk.h new file mode 100644 index 0000000000..386884c2a2 --- /dev/null +++ b/drivers/misc/bcm-vk/bcm_vk.h @@ -0,0 +1,549 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright 2018-2020 Broadcom. + */ + +#ifndef BCM_VK_H +#define BCM_VK_H + +#include <linux/atomic.h> +#include <linux/firmware.h> +#include <linux/irq.h> +#include <linux/kref.h> +#include <linux/miscdevice.h> +#include <linux/mutex.h> +#include <linux/pci.h> +#include <linux/poll.h> +#include <linux/sched/signal.h> +#include <linux/tty.h> +#include <linux/uaccess.h> +#include <uapi/linux/misc/bcm_vk.h> + +#include "bcm_vk_msg.h" + +#define DRV_MODULE_NAME "bcm-vk" + +/* + * Load Image is completed in two stages: + * + * 1) When the VK device boot-up, M7 CPU runs and executes the BootROM. + * The Secure Boot Loader (SBL) as part of the BootROM will run + * to open up ITCM for host to push BOOT1 image. + * SBL will authenticate the image before jumping to BOOT1 image. + * + * 2) Because BOOT1 image is a secured image, we also called it the + * Secure Boot Image (SBI). At second stage, SBI will initialize DDR + * and wait for host to push BOOT2 image to DDR. + * SBI will authenticate the image before jumping to BOOT2 image. + * + */ +/* Location of registers of interest in BAR0 */ + +/* Request register for Secure Boot Loader (SBL) download */ +#define BAR_CODEPUSH_SBL 0x400 +/* Start of ITCM */ +#define CODEPUSH_BOOT1_ENTRY 0x00400000 +#define CODEPUSH_MASK 0xfffff000 +#define CODEPUSH_BOOTSTART BIT(0) + +/* Boot Status register */ +#define BAR_BOOT_STATUS 0x404 + +#define SRAM_OPEN BIT(16) +#define DDR_OPEN BIT(17) + +/* Firmware loader progress status definitions */ +#define FW_LOADER_ACK_SEND_MORE_DATA BIT(18) +#define FW_LOADER_ACK_IN_PROGRESS BIT(19) +#define FW_LOADER_ACK_RCVD_ALL_DATA BIT(20) + +/* Boot1/2 is running in standalone mode */ +#define BOOT_STDALONE_RUNNING BIT(21) + +/* definitions for boot status register */ +#define BOOT_STATE_MASK (0xffffffff & \ + ~(FW_LOADER_ACK_SEND_MORE_DATA | \ + FW_LOADER_ACK_IN_PROGRESS | \ + BOOT_STDALONE_RUNNING)) + +#define BOOT_ERR_SHIFT 4 +#define BOOT_ERR_MASK (0xf << BOOT_ERR_SHIFT) +#define BOOT_PROG_MASK 0xf + +#define BROM_STATUS_NOT_RUN 0x2 +#define BROM_NOT_RUN (SRAM_OPEN | BROM_STATUS_NOT_RUN) +#define BROM_STATUS_COMPLETE 0x6 +#define BROM_RUNNING (SRAM_OPEN | BROM_STATUS_COMPLETE) +#define BOOT1_STATUS_COMPLETE 0x6 +#define BOOT1_RUNNING (DDR_OPEN | BOOT1_STATUS_COMPLETE) +#define BOOT2_STATUS_COMPLETE 0x6 +#define BOOT2_RUNNING (FW_LOADER_ACK_RCVD_ALL_DATA | \ + BOOT2_STATUS_COMPLETE) + +/* Boot request for Secure Boot Image (SBI) */ +#define BAR_CODEPUSH_SBI 0x408 +/* 64M mapped to BAR2 */ +#define CODEPUSH_BOOT2_ENTRY 0x60000000 + +#define BAR_CARD_STATUS 0x410 +/* CARD_STATUS definitions */ +#define CARD_STATUS_TTYVK0_READY BIT(0) +#define CARD_STATUS_TTYVK1_READY BIT(1) + +#define BAR_BOOT1_STDALONE_PROGRESS 0x420 +#define BOOT1_STDALONE_SUCCESS (BIT(13) | BIT(14)) +#define BOOT1_STDALONE_PROGRESS_MASK BOOT1_STDALONE_SUCCESS + +#define BAR_METADATA_VERSION 0x440 +#define BAR_OS_UPTIME 0x444 +#define BAR_CHIP_ID 0x448 +#define MAJOR_SOC_REV(_chip_id) (((_chip_id) >> 20) & 0xf) + +#define BAR_CARD_TEMPERATURE 0x45c +/* defines for all temperature sensor */ +#define BCM_VK_TEMP_FIELD_MASK 0xff +#define BCM_VK_CPU_TEMP_SHIFT 0 +#define BCM_VK_DDR0_TEMP_SHIFT 8 +#define BCM_VK_DDR1_TEMP_SHIFT 16 + +#define BAR_CARD_VOLTAGE 0x460 +/* defines for voltage rail conversion */ +#define BCM_VK_VOLT_RAIL_MASK 0xffff +#define BCM_VK_3P3_VOLT_REG_SHIFT 16 + +#define BAR_CARD_ERR_LOG 0x464 +/* Error log register bit definition - register for error alerts */ +#define ERR_LOG_UECC BIT(0) +#define ERR_LOG_SSIM_BUSY BIT(1) +#define ERR_LOG_AFBC_BUSY BIT(2) +#define ERR_LOG_HIGH_TEMP_ERR BIT(3) +#define ERR_LOG_WDOG_TIMEOUT BIT(4) +#define ERR_LOG_SYS_FAULT BIT(5) +#define ERR_LOG_RAMDUMP BIT(6) +#define ERR_LOG_COP_WDOG_TIMEOUT BIT(7) +/* warnings */ +#define ERR_LOG_MEM_ALLOC_FAIL BIT(8) +#define ERR_LOG_LOW_TEMP_WARN BIT(9) +#define ERR_LOG_ECC BIT(10) +#define ERR_LOG_IPC_DWN BIT(11) + +/* Alert bit definitions detectd on host */ +#define ERR_LOG_HOST_INTF_V_FAIL BIT(13) +#define ERR_LOG_HOST_HB_FAIL BIT(14) +#define ERR_LOG_HOST_PCIE_DWN BIT(15) + +#define BAR_CARD_ERR_MEM 0x468 +/* defines for mem err, all fields have same width */ +#define BCM_VK_MEM_ERR_FIELD_MASK 0xff +#define BCM_VK_ECC_MEM_ERR_SHIFT 0 +#define BCM_VK_UECC_MEM_ERR_SHIFT 8 +/* threshold of event occurrence and logs start to come out */ +#define BCM_VK_ECC_THRESHOLD 10 +#define BCM_VK_UECC_THRESHOLD 1 + +#define BAR_CARD_PWR_AND_THRE 0x46c +/* defines for power and temp threshold, all fields have same width */ +#define BCM_VK_PWR_AND_THRE_FIELD_MASK 0xff +#define BCM_VK_LOW_TEMP_THRE_SHIFT 0 +#define BCM_VK_HIGH_TEMP_THRE_SHIFT 8 +#define BCM_VK_PWR_STATE_SHIFT 16 + +#define BAR_CARD_STATIC_INFO 0x470 + +#define BAR_INTF_VER 0x47c +#define BAR_INTF_VER_MAJOR_SHIFT 16 +#define BAR_INTF_VER_MASK 0xffff +/* + * major and minor semantic version numbers supported + * Please update as required on interface changes + */ +#define SEMANTIC_MAJOR 1 +#define SEMANTIC_MINOR 0 + +/* + * first door bell reg, ie for queue = 0. Only need the first one, as + * we will use the queue number to derive the others + */ +#define VK_BAR0_REGSEG_DB_BASE 0x484 +#define VK_BAR0_REGSEG_DB_REG_GAP 8 /* + * DB register gap, + * DB1 at 0x48c and DB2 at 0x494 + */ + +/* reset register and specific values */ +#define VK_BAR0_RESET_DB_NUM 3 +#define VK_BAR0_RESET_DB_SOFT 0xffffffff +#define VK_BAR0_RESET_DB_HARD 0xfffffffd +#define VK_BAR0_RESET_RAMPDUMP 0xa0000000 + +#define VK_BAR0_Q_DB_BASE(q_num) (VK_BAR0_REGSEG_DB_BASE + \ + ((q_num) * VK_BAR0_REGSEG_DB_REG_GAP)) +#define VK_BAR0_RESET_DB_BASE (VK_BAR0_REGSEG_DB_BASE + \ + (VK_BAR0_RESET_DB_NUM * VK_BAR0_REGSEG_DB_REG_GAP)) + +#define BAR_BOOTSRC_SELECT 0xc78 +/* BOOTSRC definitions */ +#define BOOTSRC_SOFT_ENABLE BIT(14) + +/* Card OS Firmware version size */ +#define BAR_FIRMWARE_TAG_SIZE 50 +#define FIRMWARE_STATUS_PRE_INIT_DONE 0x1f + +/* VK MSG_ID defines */ +#define VK_MSG_ID_BITMAP_SIZE 4096 +#define VK_MSG_ID_BITMAP_MASK (VK_MSG_ID_BITMAP_SIZE - 1) +#define VK_MSG_ID_OVERFLOW 0xffff + +/* + * BAR1 + */ + +/* BAR1 message q definition */ + +/* indicate if msgq ctrl in BAR1 is populated */ +#define VK_BAR1_MSGQ_DEF_RDY 0x60c0 +/* ready marker value for the above location, normal boot2 */ +#define VK_BAR1_MSGQ_RDY_MARKER 0xbeefcafe +/* ready marker value for the above location, normal boot2 */ +#define VK_BAR1_DIAG_RDY_MARKER 0xdeadcafe +/* number of msgqs in BAR1 */ +#define VK_BAR1_MSGQ_NR 0x60c4 +/* BAR1 queue control structure offset */ +#define VK_BAR1_MSGQ_CTRL_OFF 0x60c8 + +/* BAR1 ucode and boot1 version tag */ +#define VK_BAR1_UCODE_VER_TAG 0x6170 +#define VK_BAR1_BOOT1_VER_TAG 0x61b0 +#define VK_BAR1_VER_TAG_SIZE 64 + +/* Memory to hold the DMA buffer memory address allocated for boot2 download */ +#define VK_BAR1_DMA_BUF_OFF_HI 0x61e0 +#define VK_BAR1_DMA_BUF_OFF_LO (VK_BAR1_DMA_BUF_OFF_HI + 4) +#define VK_BAR1_DMA_BUF_SZ (VK_BAR1_DMA_BUF_OFF_HI + 8) + +/* Scratch memory allocated on host for VK */ +#define VK_BAR1_SCRATCH_OFF_HI 0x61f0 +#define VK_BAR1_SCRATCH_OFF_LO (VK_BAR1_SCRATCH_OFF_HI + 4) +#define VK_BAR1_SCRATCH_SZ_ADDR (VK_BAR1_SCRATCH_OFF_HI + 8) +#define VK_BAR1_SCRATCH_DEF_NR_PAGES 32 + +/* BAR1 DAUTH info */ +#define VK_BAR1_DAUTH_BASE_ADDR 0x6200 +#define VK_BAR1_DAUTH_STORE_SIZE 0x48 +#define VK_BAR1_DAUTH_VALID_SIZE 0x8 +#define VK_BAR1_DAUTH_MAX 4 +#define VK_BAR1_DAUTH_STORE_ADDR(x) \ + (VK_BAR1_DAUTH_BASE_ADDR + \ + (x) * (VK_BAR1_DAUTH_STORE_SIZE + VK_BAR1_DAUTH_VALID_SIZE)) +#define VK_BAR1_DAUTH_VALID_ADDR(x) \ + (VK_BAR1_DAUTH_STORE_ADDR(x) + VK_BAR1_DAUTH_STORE_SIZE) + +/* BAR1 SOTP AUTH and REVID info */ +#define VK_BAR1_SOTP_REVID_BASE_ADDR 0x6340 +#define VK_BAR1_SOTP_REVID_SIZE 0x10 +#define VK_BAR1_SOTP_REVID_MAX 2 +#define VK_BAR1_SOTP_REVID_ADDR(x) \ + (VK_BAR1_SOTP_REVID_BASE_ADDR + (x) * VK_BAR1_SOTP_REVID_SIZE) + +/* VK device supports a maximum of 3 bars */ +#define MAX_BAR 3 + +/* default number of msg blk for inband SGL */ +#define BCM_VK_DEF_IB_SGL_BLK_LEN 16 +#define BCM_VK_IB_SGL_BLK_MAX 24 + +enum pci_barno { + BAR_0 = 0, + BAR_1, + BAR_2 +}; + +#ifdef CONFIG_BCM_VK_TTY +#define BCM_VK_NUM_TTY 2 +#else +#define BCM_VK_NUM_TTY 0 +#endif + +struct bcm_vk_tty { + struct tty_port port; + u32 to_offset; /* bar offset to use */ + u32 to_size; /* to VK buffer size */ + u32 wr; /* write offset shadow */ + u32 from_offset; /* bar offset to use */ + u32 from_size; /* from VK buffer size */ + u32 rd; /* read offset shadow */ + pid_t pid; + bool irq_enabled; + bool is_opened; /* tracks tty open/close */ +}; + +/* VK device max power state, supports 3, full, reduced and low */ +#define MAX_OPP 3 +#define MAX_CARD_INFO_TAG_SIZE 64 + +struct bcm_vk_card_info { + u32 version; + char os_tag[MAX_CARD_INFO_TAG_SIZE]; + char cmpt_tag[MAX_CARD_INFO_TAG_SIZE]; + u32 cpu_freq_mhz; + u32 cpu_scale[MAX_OPP]; + u32 ddr_freq_mhz; + u32 ddr_size_MB; + u32 video_core_freq_mhz; +}; + +/* DAUTH related info */ +struct bcm_vk_dauth_key { + char store[VK_BAR1_DAUTH_STORE_SIZE]; + char valid[VK_BAR1_DAUTH_VALID_SIZE]; +}; + +struct bcm_vk_dauth_info { + struct bcm_vk_dauth_key keys[VK_BAR1_DAUTH_MAX]; +}; + +/* + * Control structure of logging messages from the card. This + * buffer is for logmsg that comes from vk + */ +struct bcm_vk_peer_log { + u32 rd_idx; + u32 wr_idx; + u32 buf_size; + u32 mask; + char data[]; +}; + +/* max buf size allowed */ +#define BCM_VK_PEER_LOG_BUF_MAX SZ_16K +/* max size per line of peer log */ +#define BCM_VK_PEER_LOG_LINE_MAX 256 + +/* + * single entry for processing type + utilization + */ +#define BCM_VK_PROC_TYPE_TAG_LEN 8 +struct bcm_vk_proc_mon_entry_t { + char tag[BCM_VK_PROC_TYPE_TAG_LEN]; + u32 used; + u32 max; /**< max capacity */ +}; + +/** + * Structure for run time utilization + */ +#define BCM_VK_PROC_MON_MAX 8 /* max entries supported */ +struct bcm_vk_proc_mon_info { + u32 num; /**< no of entries */ + u32 entry_size; /**< per entry size */ + struct bcm_vk_proc_mon_entry_t entries[BCM_VK_PROC_MON_MAX]; +}; + +struct bcm_vk_hb_ctrl { + struct delayed_work work; + u32 last_uptime; + u32 lost_cnt; +}; + +struct bcm_vk_alert { + u16 flags; + u16 notfs; +}; + +/* some alert counters that the driver will keep track */ +struct bcm_vk_alert_cnts { + u16 ecc; + u16 uecc; +}; + +struct bcm_vk { + struct pci_dev *pdev; + void __iomem *bar[MAX_BAR]; + int num_irqs; + + struct bcm_vk_card_info card_info; + struct bcm_vk_proc_mon_info proc_mon_info; + struct bcm_vk_dauth_info dauth_info; + + /* mutex to protect the ioctls */ + struct mutex mutex; + struct miscdevice miscdev; + int devid; /* dev id allocated */ + +#ifdef CONFIG_BCM_VK_TTY + struct tty_driver *tty_drv; + struct timer_list serial_timer; + struct bcm_vk_tty tty[BCM_VK_NUM_TTY]; + struct workqueue_struct *tty_wq_thread; + struct work_struct tty_wq_work; +#endif + + /* Reference-counting to handle file operations */ + struct kref kref; + + spinlock_t msg_id_lock; /* Spinlock for msg_id */ + u16 msg_id; + DECLARE_BITMAP(bmap, VK_MSG_ID_BITMAP_SIZE); + spinlock_t ctx_lock; /* Spinlock for component context */ + struct bcm_vk_ctx ctx[VK_CMPT_CTX_MAX]; + struct bcm_vk_ht_entry pid_ht[VK_PID_HT_SZ]; + pid_t reset_pid; /* process that issue reset */ + + atomic_t msgq_inited; /* indicate if info has been synced with vk */ + struct bcm_vk_msg_chan to_v_msg_chan; + struct bcm_vk_msg_chan to_h_msg_chan; + + struct workqueue_struct *wq_thread; + struct work_struct wq_work; /* work queue for deferred job */ + unsigned long wq_offload[1]; /* various flags on wq requested */ + void *tdma_vaddr; /* test dma segment virtual addr */ + dma_addr_t tdma_addr; /* test dma segment bus addr */ + + struct notifier_block panic_nb; + u32 ib_sgl_size; /* size allocated for inband sgl insertion */ + + /* heart beat mechanism control structure */ + struct bcm_vk_hb_ctrl hb_ctrl; + /* house-keeping variable of error logs */ + spinlock_t host_alert_lock; /* protection to access host_alert struct */ + struct bcm_vk_alert host_alert; + struct bcm_vk_alert peer_alert; /* bits set by the card */ + struct bcm_vk_alert_cnts alert_cnts; + + /* offset of the peer log control in BAR2 */ + u32 peerlog_off; + struct bcm_vk_peer_log peerlog_info; /* record of peer log info */ + /* offset of processing monitoring info in BAR2 */ + u32 proc_mon_off; +}; + +/* wq offload work items bits definitions */ +enum bcm_vk_wq_offload_flags { + BCM_VK_WQ_DWNLD_PEND = 0, + BCM_VK_WQ_DWNLD_AUTO = 1, + BCM_VK_WQ_NOTF_PEND = 2, +}; + +/* a macro to get an individual field with mask and shift */ +#define BCM_VK_EXTRACT_FIELD(_field, _reg, _mask, _shift) \ + (_field = (((_reg) >> (_shift)) & (_mask))) + +struct bcm_vk_entry { + const u32 mask; + const u32 exp_val; + const char *str; +}; + +/* alerts that could be generated from peer */ +#define BCM_VK_PEER_ERR_NUM 12 +extern struct bcm_vk_entry const bcm_vk_peer_err[BCM_VK_PEER_ERR_NUM]; +/* alerts detected by the host */ +#define BCM_VK_HOST_ERR_NUM 3 +extern struct bcm_vk_entry const bcm_vk_host_err[BCM_VK_HOST_ERR_NUM]; + +/* + * check if PCIe interface is down on read. Use it when it is + * certain that _val should never be all ones. + */ +#define BCM_VK_INTF_IS_DOWN(val) ((val) == 0xffffffff) + +static inline u32 vkread32(struct bcm_vk *vk, enum pci_barno bar, u64 offset) +{ + return readl(vk->bar[bar] + offset); +} + +static inline void vkwrite32(struct bcm_vk *vk, + u32 value, + enum pci_barno bar, + u64 offset) +{ + writel(value, vk->bar[bar] + offset); +} + +static inline u8 vkread8(struct bcm_vk *vk, enum pci_barno bar, u64 offset) +{ + return readb(vk->bar[bar] + offset); +} + +static inline void vkwrite8(struct bcm_vk *vk, + u8 value, + enum pci_barno bar, + u64 offset) +{ + writeb(value, vk->bar[bar] + offset); +} + +static inline bool bcm_vk_msgq_marker_valid(struct bcm_vk *vk) +{ + u32 rdy_marker = 0; + u32 fw_status; + + fw_status = vkread32(vk, BAR_0, VK_BAR_FWSTS); + + if ((fw_status & VK_FWSTS_READY) == VK_FWSTS_READY) + rdy_marker = vkread32(vk, BAR_1, VK_BAR1_MSGQ_DEF_RDY); + + return (rdy_marker == VK_BAR1_MSGQ_RDY_MARKER); +} + +int bcm_vk_open(struct inode *inode, struct file *p_file); +ssize_t bcm_vk_read(struct file *p_file, char __user *buf, size_t count, + loff_t *f_pos); +ssize_t bcm_vk_write(struct file *p_file, const char __user *buf, + size_t count, loff_t *f_pos); +__poll_t bcm_vk_poll(struct file *p_file, struct poll_table_struct *wait); +int bcm_vk_release(struct inode *inode, struct file *p_file); +void bcm_vk_release_data(struct kref *kref); +irqreturn_t bcm_vk_msgq_irqhandler(int irq, void *dev_id); +irqreturn_t bcm_vk_notf_irqhandler(int irq, void *dev_id); +irqreturn_t bcm_vk_tty_irqhandler(int irq, void *dev_id); +int bcm_vk_msg_init(struct bcm_vk *vk); +void bcm_vk_msg_remove(struct bcm_vk *vk); +void bcm_vk_drain_msg_on_reset(struct bcm_vk *vk); +int bcm_vk_sync_msgq(struct bcm_vk *vk, bool force_sync); +void bcm_vk_blk_drv_access(struct bcm_vk *vk); +s32 bcm_to_h_msg_dequeue(struct bcm_vk *vk); +int bcm_vk_send_shutdown_msg(struct bcm_vk *vk, u32 shut_type, + const pid_t pid, const u32 q_num); +void bcm_to_v_q_doorbell(struct bcm_vk *vk, u32 q_num, u32 db_val); +int bcm_vk_auto_load_all_images(struct bcm_vk *vk); +void bcm_vk_hb_init(struct bcm_vk *vk); +void bcm_vk_hb_deinit(struct bcm_vk *vk); +void bcm_vk_handle_notf(struct bcm_vk *vk); +bool bcm_vk_drv_access_ok(struct bcm_vk *vk); +void bcm_vk_set_host_alert(struct bcm_vk *vk, u32 bit_mask); + +#ifdef CONFIG_BCM_VK_TTY +int bcm_vk_tty_init(struct bcm_vk *vk, char *name); +void bcm_vk_tty_exit(struct bcm_vk *vk); +void bcm_vk_tty_terminate_tty_user(struct bcm_vk *vk); +void bcm_vk_tty_wq_exit(struct bcm_vk *vk); + +static inline void bcm_vk_tty_set_irq_enabled(struct bcm_vk *vk, int index) +{ + vk->tty[index].irq_enabled = true; +} +#else +static inline int bcm_vk_tty_init(struct bcm_vk *vk, char *name) +{ + return 0; +} + +static inline void bcm_vk_tty_exit(struct bcm_vk *vk) +{ +} + +static inline void bcm_vk_tty_terminate_tty_user(struct bcm_vk *vk) +{ +} + +static inline void bcm_vk_tty_wq_exit(struct bcm_vk *vk) +{ +} + +static inline void bcm_vk_tty_set_irq_enabled(struct bcm_vk *vk, int index) +{ +} +#endif /* CONFIG_BCM_VK_TTY */ + +#endif |