summaryrefslogtreecommitdiffstats
path: root/drivers/misc/mei/hdcp
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/misc/mei/hdcp')
-rw-r--r--drivers/misc/mei/hdcp/Kconfig12
-rw-r--r--drivers/misc/mei/hdcp/Makefile7
-rw-r--r--drivers/misc/mei/hdcp/mei_hdcp.c879
-rw-r--r--drivers/misc/mei/hdcp/mei_hdcp.h14
4 files changed, 912 insertions, 0 deletions
diff --git a/drivers/misc/mei/hdcp/Kconfig b/drivers/misc/mei/hdcp/Kconfig
new file mode 100644
index 0000000000..54e1c95269
--- /dev/null
+++ b/drivers/misc/mei/hdcp/Kconfig
@@ -0,0 +1,12 @@
+# SPDX-License-Identifier: GPL-2.0
+# Copyright (c) 2019, Intel Corporation. All rights reserved.
+#
+config INTEL_MEI_HDCP
+ tristate "Intel HDCP2.2 services of ME Interface"
+ select INTEL_MEI_ME
+ depends on DRM_I915
+ help
+ MEI Support for HDCP2.2 Services on Intel platforms.
+
+ Enables the ME FW services required for HDCP2.2 support through
+ I915 display driver of Intel.
diff --git a/drivers/misc/mei/hdcp/Makefile b/drivers/misc/mei/hdcp/Makefile
new file mode 100644
index 0000000000..3fbb56485c
--- /dev/null
+++ b/drivers/misc/mei/hdcp/Makefile
@@ -0,0 +1,7 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Copyright (c) 2019, Intel Corporation. All rights reserved.
+#
+# Makefile - HDCP client driver for Intel MEI Bus Driver.
+
+obj-$(CONFIG_INTEL_MEI_HDCP) += mei_hdcp.o
diff --git a/drivers/misc/mei/hdcp/mei_hdcp.c b/drivers/misc/mei/hdcp/mei_hdcp.c
new file mode 100644
index 0000000000..51359cc5ec
--- /dev/null
+++ b/drivers/misc/mei/hdcp/mei_hdcp.c
@@ -0,0 +1,879 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright © 2019 Intel Corporation
+ *
+ * mei_hdcp.c: HDCP client driver for mei bus
+ *
+ * Author:
+ * Ramalingam C <ramalingam.c@intel.com>
+ */
+
+/**
+ * DOC: MEI_HDCP Client Driver
+ *
+ * The mei_hdcp driver acts as a translation layer between HDCP 2.2
+ * protocol implementer (I915) and ME FW by translating HDCP2.2
+ * negotiation messages to ME FW command payloads and vice versa.
+ */
+
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/mei.h>
+#include <linux/mei_cl_bus.h>
+#include <linux/component.h>
+#include <drm/drm_connector.h>
+#include <drm/i915_component.h>
+#include <drm/i915_hdcp_interface.h>
+
+#include "mei_hdcp.h"
+
+/**
+ * mei_hdcp_initiate_session() - Initiate a Wired HDCP2.2 Tx Session in ME FW
+ * @dev: device corresponding to the mei_cl_device
+ * @data: Intel HW specific hdcp data
+ * @ake_data: AKE_Init msg output.
+ *
+ * Return: 0 on Success, <0 on Failure.
+ */
+static int
+mei_hdcp_initiate_session(struct device *dev, struct hdcp_port_data *data,
+ struct hdcp2_ake_init *ake_data)
+{
+ struct wired_cmd_initiate_hdcp2_session_in session_init_in = { { 0 } };
+ struct wired_cmd_initiate_hdcp2_session_out
+ session_init_out = { { 0 } };
+ struct mei_cl_device *cldev;
+ ssize_t byte;
+
+ if (!dev || !data || !ake_data)
+ return -EINVAL;
+
+ cldev = to_mei_cl_device(dev);
+
+ session_init_in.header.api_version = HDCP_API_VERSION;
+ session_init_in.header.command_id = WIRED_INITIATE_HDCP2_SESSION;
+ session_init_in.header.status = FW_HDCP_STATUS_SUCCESS;
+ session_init_in.header.buffer_len =
+ WIRED_CMD_BUF_LEN_INITIATE_HDCP2_SESSION_IN;
+
+ session_init_in.port.integrated_port_type = data->port_type;
+ session_init_in.port.physical_port = (u8)data->hdcp_ddi;
+ session_init_in.port.attached_transcoder = (u8)data->hdcp_transcoder;
+ session_init_in.protocol = data->protocol;
+
+ byte = mei_cldev_send(cldev, (u8 *)&session_init_in,
+ sizeof(session_init_in));
+ if (byte < 0) {
+ dev_dbg(dev, "mei_cldev_send failed. %zd\n", byte);
+ return byte;
+ }
+
+ byte = mei_cldev_recv(cldev, (u8 *)&session_init_out,
+ sizeof(session_init_out));
+ if (byte < 0) {
+ dev_dbg(dev, "mei_cldev_recv failed. %zd\n", byte);
+ return byte;
+ }
+
+ if (session_init_out.header.status != FW_HDCP_STATUS_SUCCESS) {
+ dev_dbg(dev, "ME cmd 0x%08X Failed. Status: 0x%X\n",
+ WIRED_INITIATE_HDCP2_SESSION,
+ session_init_out.header.status);
+ return -EIO;
+ }
+
+ ake_data->msg_id = HDCP_2_2_AKE_INIT;
+ ake_data->tx_caps = session_init_out.tx_caps;
+ memcpy(ake_data->r_tx, session_init_out.r_tx, HDCP_2_2_RTX_LEN);
+
+ return 0;
+}
+
+/**
+ * mei_hdcp_verify_receiver_cert_prepare_km() - Verify the Receiver Certificate
+ * AKE_Send_Cert and prepare AKE_Stored_Km/AKE_No_Stored_Km
+ * @dev: device corresponding to the mei_cl_device
+ * @data: Intel HW specific hdcp data
+ * @rx_cert: AKE_Send_Cert for verification
+ * @km_stored: Pairing status flag output
+ * @ek_pub_km: AKE_Stored_Km/AKE_No_Stored_Km output msg
+ * @msg_sz : size of AKE_XXXXX_Km output msg
+ *
+ * Return: 0 on Success, <0 on Failure
+ */
+static int
+mei_hdcp_verify_receiver_cert_prepare_km(struct device *dev,
+ struct hdcp_port_data *data,
+ struct hdcp2_ake_send_cert *rx_cert,
+ bool *km_stored,
+ struct hdcp2_ake_no_stored_km
+ *ek_pub_km,
+ size_t *msg_sz)
+{
+ struct wired_cmd_verify_receiver_cert_in verify_rxcert_in = { { 0 } };
+ struct wired_cmd_verify_receiver_cert_out verify_rxcert_out = { { 0 } };
+ struct mei_cl_device *cldev;
+ ssize_t byte;
+
+ if (!dev || !data || !rx_cert || !km_stored || !ek_pub_km || !msg_sz)
+ return -EINVAL;
+
+ cldev = to_mei_cl_device(dev);
+
+ verify_rxcert_in.header.api_version = HDCP_API_VERSION;
+ verify_rxcert_in.header.command_id = WIRED_VERIFY_RECEIVER_CERT;
+ verify_rxcert_in.header.status = FW_HDCP_STATUS_SUCCESS;
+ verify_rxcert_in.header.buffer_len =
+ WIRED_CMD_BUF_LEN_VERIFY_RECEIVER_CERT_IN;
+
+ verify_rxcert_in.port.integrated_port_type = data->port_type;
+ verify_rxcert_in.port.physical_port = (u8)data->hdcp_ddi;
+ verify_rxcert_in.port.attached_transcoder = (u8)data->hdcp_transcoder;
+
+ verify_rxcert_in.cert_rx = rx_cert->cert_rx;
+ memcpy(verify_rxcert_in.r_rx, &rx_cert->r_rx, HDCP_2_2_RRX_LEN);
+ memcpy(verify_rxcert_in.rx_caps, rx_cert->rx_caps, HDCP_2_2_RXCAPS_LEN);
+
+ byte = mei_cldev_send(cldev, (u8 *)&verify_rxcert_in,
+ sizeof(verify_rxcert_in));
+ if (byte < 0) {
+ dev_dbg(dev, "mei_cldev_send failed: %zd\n", byte);
+ return byte;
+ }
+
+ byte = mei_cldev_recv(cldev, (u8 *)&verify_rxcert_out,
+ sizeof(verify_rxcert_out));
+ if (byte < 0) {
+ dev_dbg(dev, "mei_cldev_recv failed: %zd\n", byte);
+ return byte;
+ }
+
+ if (verify_rxcert_out.header.status != FW_HDCP_STATUS_SUCCESS) {
+ dev_dbg(dev, "ME cmd 0x%08X Failed. Status: 0x%X\n",
+ WIRED_VERIFY_RECEIVER_CERT,
+ verify_rxcert_out.header.status);
+ return -EIO;
+ }
+
+ *km_stored = !!verify_rxcert_out.km_stored;
+ if (verify_rxcert_out.km_stored) {
+ ek_pub_km->msg_id = HDCP_2_2_AKE_STORED_KM;
+ *msg_sz = sizeof(struct hdcp2_ake_stored_km);
+ } else {
+ ek_pub_km->msg_id = HDCP_2_2_AKE_NO_STORED_KM;
+ *msg_sz = sizeof(struct hdcp2_ake_no_stored_km);
+ }
+
+ memcpy(ek_pub_km->e_kpub_km, &verify_rxcert_out.ekm_buff,
+ sizeof(verify_rxcert_out.ekm_buff));
+
+ return 0;
+}
+
+/**
+ * mei_hdcp_verify_hprime() - Verify AKE_Send_H_prime at ME FW.
+ * @dev: device corresponding to the mei_cl_device
+ * @data: Intel HW specific hdcp data
+ * @rx_hprime: AKE_Send_H_prime msg for ME FW verification
+ *
+ * Return: 0 on Success, <0 on Failure
+ */
+static int
+mei_hdcp_verify_hprime(struct device *dev, struct hdcp_port_data *data,
+ struct hdcp2_ake_send_hprime *rx_hprime)
+{
+ struct wired_cmd_ake_send_hprime_in send_hprime_in = { { 0 } };
+ struct wired_cmd_ake_send_hprime_out send_hprime_out = { { 0 } };
+ struct mei_cl_device *cldev;
+ ssize_t byte;
+
+ if (!dev || !data || !rx_hprime)
+ return -EINVAL;
+
+ cldev = to_mei_cl_device(dev);
+
+ send_hprime_in.header.api_version = HDCP_API_VERSION;
+ send_hprime_in.header.command_id = WIRED_AKE_SEND_HPRIME;
+ send_hprime_in.header.status = FW_HDCP_STATUS_SUCCESS;
+ send_hprime_in.header.buffer_len = WIRED_CMD_BUF_LEN_AKE_SEND_HPRIME_IN;
+
+ send_hprime_in.port.integrated_port_type = data->port_type;
+ send_hprime_in.port.physical_port = (u8)data->hdcp_ddi;
+ send_hprime_in.port.attached_transcoder = (u8)data->hdcp_transcoder;
+
+ memcpy(send_hprime_in.h_prime, rx_hprime->h_prime,
+ HDCP_2_2_H_PRIME_LEN);
+
+ byte = mei_cldev_send(cldev, (u8 *)&send_hprime_in,
+ sizeof(send_hprime_in));
+ if (byte < 0) {
+ dev_dbg(dev, "mei_cldev_send failed. %zd\n", byte);
+ return byte;
+ }
+
+ byte = mei_cldev_recv(cldev, (u8 *)&send_hprime_out,
+ sizeof(send_hprime_out));
+ if (byte < 0) {
+ dev_dbg(dev, "mei_cldev_recv failed. %zd\n", byte);
+ return byte;
+ }
+
+ if (send_hprime_out.header.status != FW_HDCP_STATUS_SUCCESS) {
+ dev_dbg(dev, "ME cmd 0x%08X Failed. Status: 0x%X\n",
+ WIRED_AKE_SEND_HPRIME, send_hprime_out.header.status);
+ return -EIO;
+ }
+
+ return 0;
+}
+
+/**
+ * mei_hdcp_store_pairing_info() - Store pairing info received at ME FW
+ * @dev: device corresponding to the mei_cl_device
+ * @data: Intel HW specific hdcp data
+ * @pairing_info: AKE_Send_Pairing_Info msg input to ME FW
+ *
+ * Return: 0 on Success, <0 on Failure
+ */
+static int
+mei_hdcp_store_pairing_info(struct device *dev, struct hdcp_port_data *data,
+ struct hdcp2_ake_send_pairing_info *pairing_info)
+{
+ struct wired_cmd_ake_send_pairing_info_in pairing_info_in = { { 0 } };
+ struct wired_cmd_ake_send_pairing_info_out pairing_info_out = { { 0 } };
+ struct mei_cl_device *cldev;
+ ssize_t byte;
+
+ if (!dev || !data || !pairing_info)
+ return -EINVAL;
+
+ cldev = to_mei_cl_device(dev);
+
+ pairing_info_in.header.api_version = HDCP_API_VERSION;
+ pairing_info_in.header.command_id = WIRED_AKE_SEND_PAIRING_INFO;
+ pairing_info_in.header.status = FW_HDCP_STATUS_SUCCESS;
+ pairing_info_in.header.buffer_len =
+ WIRED_CMD_BUF_LEN_SEND_PAIRING_INFO_IN;
+
+ pairing_info_in.port.integrated_port_type = data->port_type;
+ pairing_info_in.port.physical_port = (u8)data->hdcp_ddi;
+ pairing_info_in.port.attached_transcoder = (u8)data->hdcp_transcoder;
+
+ memcpy(pairing_info_in.e_kh_km, pairing_info->e_kh_km,
+ HDCP_2_2_E_KH_KM_LEN);
+
+ byte = mei_cldev_send(cldev, (u8 *)&pairing_info_in,
+ sizeof(pairing_info_in));
+ if (byte < 0) {
+ dev_dbg(dev, "mei_cldev_send failed. %zd\n", byte);
+ return byte;
+ }
+
+ byte = mei_cldev_recv(cldev, (u8 *)&pairing_info_out,
+ sizeof(pairing_info_out));
+ if (byte < 0) {
+ dev_dbg(dev, "mei_cldev_recv failed. %zd\n", byte);
+ return byte;
+ }
+
+ if (pairing_info_out.header.status != FW_HDCP_STATUS_SUCCESS) {
+ dev_dbg(dev, "ME cmd 0x%08X failed. Status: 0x%X\n",
+ WIRED_AKE_SEND_PAIRING_INFO,
+ pairing_info_out.header.status);
+ return -EIO;
+ }
+
+ return 0;
+}
+
+/**
+ * mei_hdcp_initiate_locality_check() - Prepare LC_Init
+ * @dev: device corresponding to the mei_cl_device
+ * @data: Intel HW specific hdcp data
+ * @lc_init_data: LC_Init msg output
+ *
+ * Return: 0 on Success, <0 on Failure
+ */
+static int
+mei_hdcp_initiate_locality_check(struct device *dev,
+ struct hdcp_port_data *data,
+ struct hdcp2_lc_init *lc_init_data)
+{
+ struct wired_cmd_init_locality_check_in lc_init_in = { { 0 } };
+ struct wired_cmd_init_locality_check_out lc_init_out = { { 0 } };
+ struct mei_cl_device *cldev;
+ ssize_t byte;
+
+ if (!dev || !data || !lc_init_data)
+ return -EINVAL;
+
+ cldev = to_mei_cl_device(dev);
+
+ lc_init_in.header.api_version = HDCP_API_VERSION;
+ lc_init_in.header.command_id = WIRED_INIT_LOCALITY_CHECK;
+ lc_init_in.header.status = FW_HDCP_STATUS_SUCCESS;
+ lc_init_in.header.buffer_len = WIRED_CMD_BUF_LEN_INIT_LOCALITY_CHECK_IN;
+
+ lc_init_in.port.integrated_port_type = data->port_type;
+ lc_init_in.port.physical_port = (u8)data->hdcp_ddi;
+ lc_init_in.port.attached_transcoder = (u8)data->hdcp_transcoder;
+
+ byte = mei_cldev_send(cldev, (u8 *)&lc_init_in, sizeof(lc_init_in));
+ if (byte < 0) {
+ dev_dbg(dev, "mei_cldev_send failed. %zd\n", byte);
+ return byte;
+ }
+
+ byte = mei_cldev_recv(cldev, (u8 *)&lc_init_out, sizeof(lc_init_out));
+ if (byte < 0) {
+ dev_dbg(dev, "mei_cldev_recv failed. %zd\n", byte);
+ return byte;
+ }
+
+ if (lc_init_out.header.status != FW_HDCP_STATUS_SUCCESS) {
+ dev_dbg(dev, "ME cmd 0x%08X Failed. status: 0x%X\n",
+ WIRED_INIT_LOCALITY_CHECK, lc_init_out.header.status);
+ return -EIO;
+ }
+
+ lc_init_data->msg_id = HDCP_2_2_LC_INIT;
+ memcpy(lc_init_data->r_n, lc_init_out.r_n, HDCP_2_2_RN_LEN);
+
+ return 0;
+}
+
+/**
+ * mei_hdcp_verify_lprime() - Verify lprime.
+ * @dev: device corresponding to the mei_cl_device
+ * @data: Intel HW specific hdcp data
+ * @rx_lprime: LC_Send_L_prime msg for ME FW verification
+ *
+ * Return: 0 on Success, <0 on Failure
+ */
+static int
+mei_hdcp_verify_lprime(struct device *dev, struct hdcp_port_data *data,
+ struct hdcp2_lc_send_lprime *rx_lprime)
+{
+ struct wired_cmd_validate_locality_in verify_lprime_in = { { 0 } };
+ struct wired_cmd_validate_locality_out verify_lprime_out = { { 0 } };
+ struct mei_cl_device *cldev;
+ ssize_t byte;
+
+ if (!dev || !data || !rx_lprime)
+ return -EINVAL;
+
+ cldev = to_mei_cl_device(dev);
+
+ verify_lprime_in.header.api_version = HDCP_API_VERSION;
+ verify_lprime_in.header.command_id = WIRED_VALIDATE_LOCALITY;
+ verify_lprime_in.header.status = FW_HDCP_STATUS_SUCCESS;
+ verify_lprime_in.header.buffer_len =
+ WIRED_CMD_BUF_LEN_VALIDATE_LOCALITY_IN;
+
+ verify_lprime_in.port.integrated_port_type = data->port_type;
+ verify_lprime_in.port.physical_port = (u8)data->hdcp_ddi;
+ verify_lprime_in.port.attached_transcoder = (u8)data->hdcp_transcoder;
+
+ memcpy(verify_lprime_in.l_prime, rx_lprime->l_prime,
+ HDCP_2_2_L_PRIME_LEN);
+
+ byte = mei_cldev_send(cldev, (u8 *)&verify_lprime_in,
+ sizeof(verify_lprime_in));
+ if (byte < 0) {
+ dev_dbg(dev, "mei_cldev_send failed. %zd\n", byte);
+ return byte;
+ }
+
+ byte = mei_cldev_recv(cldev, (u8 *)&verify_lprime_out,
+ sizeof(verify_lprime_out));
+ if (byte < 0) {
+ dev_dbg(dev, "mei_cldev_recv failed. %zd\n", byte);
+ return byte;
+ }
+
+ if (verify_lprime_out.header.status != FW_HDCP_STATUS_SUCCESS) {
+ dev_dbg(dev, "ME cmd 0x%08X failed. status: 0x%X\n",
+ WIRED_VALIDATE_LOCALITY,
+ verify_lprime_out.header.status);
+ return -EIO;
+ }
+
+ return 0;
+}
+
+/**
+ * mei_hdcp_get_session_key() - Prepare SKE_Send_Eks.
+ * @dev: device corresponding to the mei_cl_device
+ * @data: Intel HW specific hdcp data
+ * @ske_data: SKE_Send_Eks msg output from ME FW.
+ *
+ * Return: 0 on Success, <0 on Failure
+ */
+static int mei_hdcp_get_session_key(struct device *dev,
+ struct hdcp_port_data *data,
+ struct hdcp2_ske_send_eks *ske_data)
+{
+ struct wired_cmd_get_session_key_in get_skey_in = { { 0 } };
+ struct wired_cmd_get_session_key_out get_skey_out = { { 0 } };
+ struct mei_cl_device *cldev;
+ ssize_t byte;
+
+ if (!dev || !data || !ske_data)
+ return -EINVAL;
+
+ cldev = to_mei_cl_device(dev);
+
+ get_skey_in.header.api_version = HDCP_API_VERSION;
+ get_skey_in.header.command_id = WIRED_GET_SESSION_KEY;
+ get_skey_in.header.status = FW_HDCP_STATUS_SUCCESS;
+ get_skey_in.header.buffer_len = WIRED_CMD_BUF_LEN_GET_SESSION_KEY_IN;
+
+ get_skey_in.port.integrated_port_type = data->port_type;
+ get_skey_in.port.physical_port = (u8)data->hdcp_ddi;
+ get_skey_in.port.attached_transcoder = (u8)data->hdcp_transcoder;
+
+ byte = mei_cldev_send(cldev, (u8 *)&get_skey_in, sizeof(get_skey_in));
+ if (byte < 0) {
+ dev_dbg(dev, "mei_cldev_send failed. %zd\n", byte);
+ return byte;
+ }
+
+ byte = mei_cldev_recv(cldev, (u8 *)&get_skey_out, sizeof(get_skey_out));
+
+ if (byte < 0) {
+ dev_dbg(dev, "mei_cldev_recv failed. %zd\n", byte);
+ return byte;
+ }
+
+ if (get_skey_out.header.status != FW_HDCP_STATUS_SUCCESS) {
+ dev_dbg(dev, "ME cmd 0x%08X failed. status: 0x%X\n",
+ WIRED_GET_SESSION_KEY, get_skey_out.header.status);
+ return -EIO;
+ }
+
+ ske_data->msg_id = HDCP_2_2_SKE_SEND_EKS;
+ memcpy(ske_data->e_dkey_ks, get_skey_out.e_dkey_ks,
+ HDCP_2_2_E_DKEY_KS_LEN);
+ memcpy(ske_data->riv, get_skey_out.r_iv, HDCP_2_2_RIV_LEN);
+
+ return 0;
+}
+
+/**
+ * mei_hdcp_repeater_check_flow_prepare_ack() - Validate the Downstream topology
+ * and prepare rep_ack.
+ * @dev: device corresponding to the mei_cl_device
+ * @data: Intel HW specific hdcp data
+ * @rep_topology: Receiver ID List to be validated
+ * @rep_send_ack : repeater ack from ME FW.
+ *
+ * Return: 0 on Success, <0 on Failure
+ */
+static int
+mei_hdcp_repeater_check_flow_prepare_ack(struct device *dev,
+ struct hdcp_port_data *data,
+ struct hdcp2_rep_send_receiverid_list
+ *rep_topology,
+ struct hdcp2_rep_send_ack
+ *rep_send_ack)
+{
+ struct wired_cmd_verify_repeater_in verify_repeater_in = { { 0 } };
+ struct wired_cmd_verify_repeater_out verify_repeater_out = { { 0 } };
+ struct mei_cl_device *cldev;
+ ssize_t byte;
+
+ if (!dev || !rep_topology || !rep_send_ack || !data)
+ return -EINVAL;
+
+ cldev = to_mei_cl_device(dev);
+
+ verify_repeater_in.header.api_version = HDCP_API_VERSION;
+ verify_repeater_in.header.command_id = WIRED_VERIFY_REPEATER;
+ verify_repeater_in.header.status = FW_HDCP_STATUS_SUCCESS;
+ verify_repeater_in.header.buffer_len =
+ WIRED_CMD_BUF_LEN_VERIFY_REPEATER_IN;
+
+ verify_repeater_in.port.integrated_port_type = data->port_type;
+ verify_repeater_in.port.physical_port = (u8)data->hdcp_ddi;
+ verify_repeater_in.port.attached_transcoder = (u8)data->hdcp_transcoder;
+
+ memcpy(verify_repeater_in.rx_info, rep_topology->rx_info,
+ HDCP_2_2_RXINFO_LEN);
+ memcpy(verify_repeater_in.seq_num_v, rep_topology->seq_num_v,
+ HDCP_2_2_SEQ_NUM_LEN);
+ memcpy(verify_repeater_in.v_prime, rep_topology->v_prime,
+ HDCP_2_2_V_PRIME_HALF_LEN);
+ memcpy(verify_repeater_in.receiver_ids, rep_topology->receiver_ids,
+ HDCP_2_2_RECEIVER_IDS_MAX_LEN);
+
+ byte = mei_cldev_send(cldev, (u8 *)&verify_repeater_in,
+ sizeof(verify_repeater_in));
+ if (byte < 0) {
+ dev_dbg(dev, "mei_cldev_send failed. %zd\n", byte);
+ return byte;
+ }
+
+ byte = mei_cldev_recv(cldev, (u8 *)&verify_repeater_out,
+ sizeof(verify_repeater_out));
+ if (byte < 0) {
+ dev_dbg(dev, "mei_cldev_recv failed. %zd\n", byte);
+ return byte;
+ }
+
+ if (verify_repeater_out.header.status != FW_HDCP_STATUS_SUCCESS) {
+ dev_dbg(dev, "ME cmd 0x%08X failed. status: 0x%X\n",
+ WIRED_VERIFY_REPEATER,
+ verify_repeater_out.header.status);
+ return -EIO;
+ }
+
+ memcpy(rep_send_ack->v, verify_repeater_out.v,
+ HDCP_2_2_V_PRIME_HALF_LEN);
+ rep_send_ack->msg_id = HDCP_2_2_REP_SEND_ACK;
+
+ return 0;
+}
+
+/**
+ * mei_hdcp_verify_mprime() - Verify mprime.
+ * @dev: device corresponding to the mei_cl_device
+ * @data: Intel HW specific hdcp data
+ * @stream_ready: RepeaterAuth_Stream_Ready msg for ME FW verification.
+ *
+ * Return: 0 on Success, <0 on Failure
+ */
+static int mei_hdcp_verify_mprime(struct device *dev,
+ struct hdcp_port_data *data,
+ struct hdcp2_rep_stream_ready *stream_ready)
+{
+ struct wired_cmd_repeater_auth_stream_req_in *verify_mprime_in;
+ struct wired_cmd_repeater_auth_stream_req_out
+ verify_mprime_out = { { 0 } };
+ struct mei_cl_device *cldev;
+ ssize_t byte;
+ size_t cmd_size;
+
+ if (!dev || !stream_ready || !data)
+ return -EINVAL;
+
+ cldev = to_mei_cl_device(dev);
+
+ cmd_size = struct_size(verify_mprime_in, streams, data->k);
+ if (cmd_size == SIZE_MAX)
+ return -EINVAL;
+
+ verify_mprime_in = kzalloc(cmd_size, GFP_KERNEL);
+ if (!verify_mprime_in)
+ return -ENOMEM;
+
+ verify_mprime_in->header.api_version = HDCP_API_VERSION;
+ verify_mprime_in->header.command_id = WIRED_REPEATER_AUTH_STREAM_REQ;
+ verify_mprime_in->header.status = FW_HDCP_STATUS_SUCCESS;
+ verify_mprime_in->header.buffer_len = cmd_size - sizeof(verify_mprime_in->header);
+
+ verify_mprime_in->port.integrated_port_type = data->port_type;
+ verify_mprime_in->port.physical_port = (u8)data->hdcp_ddi;
+ verify_mprime_in->port.attached_transcoder = (u8)data->hdcp_transcoder;
+
+ memcpy(verify_mprime_in->m_prime, stream_ready->m_prime, HDCP_2_2_MPRIME_LEN);
+ drm_hdcp_cpu_to_be24(verify_mprime_in->seq_num_m, data->seq_num_m);
+
+ memcpy(verify_mprime_in->streams, data->streams,
+ array_size(data->k, sizeof(*data->streams)));
+
+ verify_mprime_in->k = cpu_to_be16(data->k);
+
+ byte = mei_cldev_send(cldev, (u8 *)verify_mprime_in, cmd_size);
+ kfree(verify_mprime_in);
+ if (byte < 0) {
+ dev_dbg(dev, "mei_cldev_send failed. %zd\n", byte);
+ return byte;
+ }
+
+ byte = mei_cldev_recv(cldev, (u8 *)&verify_mprime_out,
+ sizeof(verify_mprime_out));
+ if (byte < 0) {
+ dev_dbg(dev, "mei_cldev_recv failed. %zd\n", byte);
+ return byte;
+ }
+
+ if (verify_mprime_out.header.status != FW_HDCP_STATUS_SUCCESS) {
+ dev_dbg(dev, "ME cmd 0x%08X failed. status: 0x%X\n",
+ WIRED_REPEATER_AUTH_STREAM_REQ,
+ verify_mprime_out.header.status);
+ return -EIO;
+ }
+
+ return 0;
+}
+
+/**
+ * mei_hdcp_enable_authentication() - Mark a port as authenticated
+ * through ME FW
+ * @dev: device corresponding to the mei_cl_device
+ * @data: Intel HW specific hdcp data
+ *
+ * Return: 0 on Success, <0 on Failure
+ */
+static int mei_hdcp_enable_authentication(struct device *dev,
+ struct hdcp_port_data *data)
+{
+ struct wired_cmd_enable_auth_in enable_auth_in = { { 0 } };
+ struct wired_cmd_enable_auth_out enable_auth_out = { { 0 } };
+ struct mei_cl_device *cldev;
+ ssize_t byte;
+
+ if (!dev || !data)
+ return -EINVAL;
+
+ cldev = to_mei_cl_device(dev);
+
+ enable_auth_in.header.api_version = HDCP_API_VERSION;
+ enable_auth_in.header.command_id = WIRED_ENABLE_AUTH;
+ enable_auth_in.header.status = FW_HDCP_STATUS_SUCCESS;
+ enable_auth_in.header.buffer_len = WIRED_CMD_BUF_LEN_ENABLE_AUTH_IN;
+
+ enable_auth_in.port.integrated_port_type = data->port_type;
+ enable_auth_in.port.physical_port = (u8)data->hdcp_ddi;
+ enable_auth_in.port.attached_transcoder = (u8)data->hdcp_transcoder;
+ enable_auth_in.stream_type = data->streams[0].stream_type;
+
+ byte = mei_cldev_send(cldev, (u8 *)&enable_auth_in,
+ sizeof(enable_auth_in));
+ if (byte < 0) {
+ dev_dbg(dev, "mei_cldev_send failed. %zd\n", byte);
+ return byte;
+ }
+
+ byte = mei_cldev_recv(cldev, (u8 *)&enable_auth_out,
+ sizeof(enable_auth_out));
+ if (byte < 0) {
+ dev_dbg(dev, "mei_cldev_recv failed. %zd\n", byte);
+ return byte;
+ }
+
+ if (enable_auth_out.header.status != FW_HDCP_STATUS_SUCCESS) {
+ dev_dbg(dev, "ME cmd 0x%08X failed. status: 0x%X\n",
+ WIRED_ENABLE_AUTH, enable_auth_out.header.status);
+ return -EIO;
+ }
+
+ return 0;
+}
+
+/**
+ * mei_hdcp_close_session() - Close the Wired HDCP Tx session of ME FW per port.
+ * This also disables the authenticated state of the port.
+ * @dev: device corresponding to the mei_cl_device
+ * @data: Intel HW specific hdcp data
+ *
+ * Return: 0 on Success, <0 on Failure
+ */
+static int
+mei_hdcp_close_session(struct device *dev, struct hdcp_port_data *data)
+{
+ struct wired_cmd_close_session_in session_close_in = { { 0 } };
+ struct wired_cmd_close_session_out session_close_out = { { 0 } };
+ struct mei_cl_device *cldev;
+ ssize_t byte;
+
+ if (!dev || !data)
+ return -EINVAL;
+
+ cldev = to_mei_cl_device(dev);
+
+ session_close_in.header.api_version = HDCP_API_VERSION;
+ session_close_in.header.command_id = WIRED_CLOSE_SESSION;
+ session_close_in.header.status = FW_HDCP_STATUS_SUCCESS;
+ session_close_in.header.buffer_len =
+ WIRED_CMD_BUF_LEN_CLOSE_SESSION_IN;
+
+ session_close_in.port.integrated_port_type = data->port_type;
+ session_close_in.port.physical_port = (u8)data->hdcp_ddi;
+ session_close_in.port.attached_transcoder = (u8)data->hdcp_transcoder;
+
+ byte = mei_cldev_send(cldev, (u8 *)&session_close_in,
+ sizeof(session_close_in));
+ if (byte < 0) {
+ dev_dbg(dev, "mei_cldev_send failed. %zd\n", byte);
+ return byte;
+ }
+
+ byte = mei_cldev_recv(cldev, (u8 *)&session_close_out,
+ sizeof(session_close_out));
+ if (byte < 0) {
+ dev_dbg(dev, "mei_cldev_recv failed. %zd\n", byte);
+ return byte;
+ }
+
+ if (session_close_out.header.status != FW_HDCP_STATUS_SUCCESS) {
+ dev_dbg(dev, "Session Close Failed. status: 0x%X\n",
+ session_close_out.header.status);
+ return -EIO;
+ }
+
+ return 0;
+}
+
+static const struct i915_hdcp_ops mei_hdcp_ops = {
+ .owner = THIS_MODULE,
+ .initiate_hdcp2_session = mei_hdcp_initiate_session,
+ .verify_receiver_cert_prepare_km =
+ mei_hdcp_verify_receiver_cert_prepare_km,
+ .verify_hprime = mei_hdcp_verify_hprime,
+ .store_pairing_info = mei_hdcp_store_pairing_info,
+ .initiate_locality_check = mei_hdcp_initiate_locality_check,
+ .verify_lprime = mei_hdcp_verify_lprime,
+ .get_session_key = mei_hdcp_get_session_key,
+ .repeater_check_flow_prepare_ack =
+ mei_hdcp_repeater_check_flow_prepare_ack,
+ .verify_mprime = mei_hdcp_verify_mprime,
+ .enable_hdcp_authentication = mei_hdcp_enable_authentication,
+ .close_hdcp_session = mei_hdcp_close_session,
+};
+
+static int mei_component_master_bind(struct device *dev)
+{
+ struct mei_cl_device *cldev = to_mei_cl_device(dev);
+ struct i915_hdcp_arbiter *comp_arbiter = mei_cldev_get_drvdata(cldev);
+ int ret;
+
+ dev_dbg(dev, "%s\n", __func__);
+ comp_arbiter->ops = &mei_hdcp_ops;
+ comp_arbiter->hdcp_dev = dev;
+ ret = component_bind_all(dev, comp_arbiter);
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
+static void mei_component_master_unbind(struct device *dev)
+{
+ struct mei_cl_device *cldev = to_mei_cl_device(dev);
+ struct i915_hdcp_arbiter *comp_arbiter = mei_cldev_get_drvdata(cldev);
+
+ dev_dbg(dev, "%s\n", __func__);
+ component_unbind_all(dev, comp_arbiter);
+}
+
+static const struct component_master_ops mei_component_master_ops = {
+ .bind = mei_component_master_bind,
+ .unbind = mei_component_master_unbind,
+};
+
+/**
+ * mei_hdcp_component_match - compare function for matching mei hdcp.
+ *
+ * The function checks if the driver is i915, the subcomponent is HDCP
+ * and the grand parent of hdcp and the parent of i915 are the same
+ * PCH device.
+ *
+ * @dev: master device
+ * @subcomponent: subcomponent to match (I915_COMPONENT_HDCP)
+ * @data: compare data (mei hdcp device)
+ *
+ * Return:
+ * * 1 - if components match
+ * * 0 - otherwise
+ */
+static int mei_hdcp_component_match(struct device *dev, int subcomponent,
+ void *data)
+{
+ struct device *base = data;
+
+ if (!dev->driver || strcmp(dev->driver->name, "i915") ||
+ subcomponent != I915_COMPONENT_HDCP)
+ return 0;
+
+ base = base->parent;
+ if (!base)
+ return 0;
+
+ base = base->parent;
+ dev = dev->parent;
+
+ return (base && dev && dev == base);
+}
+
+static int mei_hdcp_probe(struct mei_cl_device *cldev,
+ const struct mei_cl_device_id *id)
+{
+ struct i915_hdcp_arbiter *comp_arbiter;
+ struct component_match *master_match;
+ int ret;
+
+ ret = mei_cldev_enable(cldev);
+ if (ret < 0) {
+ dev_err(&cldev->dev, "mei_cldev_enable Failed. %d\n", ret);
+ goto enable_err_exit;
+ }
+
+ comp_arbiter = kzalloc(sizeof(*comp_arbiter), GFP_KERNEL);
+ if (!comp_arbiter) {
+ ret = -ENOMEM;
+ goto err_exit;
+ }
+
+ master_match = NULL;
+ component_match_add_typed(&cldev->dev, &master_match,
+ mei_hdcp_component_match, &cldev->dev);
+ if (IS_ERR_OR_NULL(master_match)) {
+ ret = -ENOMEM;
+ goto err_exit;
+ }
+
+ mei_cldev_set_drvdata(cldev, comp_arbiter);
+ ret = component_master_add_with_match(&cldev->dev,
+ &mei_component_master_ops,
+ master_match);
+ if (ret < 0) {
+ dev_err(&cldev->dev, "Master comp add failed %d\n", ret);
+ goto err_exit;
+ }
+
+ return 0;
+
+err_exit:
+ mei_cldev_set_drvdata(cldev, NULL);
+ kfree(comp_arbiter);
+ mei_cldev_disable(cldev);
+enable_err_exit:
+ return ret;
+}
+
+static void mei_hdcp_remove(struct mei_cl_device *cldev)
+{
+ struct i915_hdcp_arbiter *comp_arbiter = mei_cldev_get_drvdata(cldev);
+ int ret;
+
+ component_master_del(&cldev->dev, &mei_component_master_ops);
+ kfree(comp_arbiter);
+ mei_cldev_set_drvdata(cldev, NULL);
+
+ ret = mei_cldev_disable(cldev);
+ if (ret)
+ dev_warn(&cldev->dev, "mei_cldev_disable() failed\n");
+}
+
+#define MEI_UUID_HDCP UUID_LE(0xB638AB7E, 0x94E2, 0x4EA2, 0xA5, \
+ 0x52, 0xD1, 0xC5, 0x4B, 0x62, 0x7F, 0x04)
+
+static const struct mei_cl_device_id mei_hdcp_tbl[] = {
+ { .uuid = MEI_UUID_HDCP, .version = MEI_CL_VERSION_ANY },
+ { }
+};
+MODULE_DEVICE_TABLE(mei, mei_hdcp_tbl);
+
+static struct mei_cl_driver mei_hdcp_driver = {
+ .id_table = mei_hdcp_tbl,
+ .name = KBUILD_MODNAME,
+ .probe = mei_hdcp_probe,
+ .remove = mei_hdcp_remove,
+};
+
+module_mei_cl_driver(mei_hdcp_driver);
+
+MODULE_AUTHOR("Intel Corporation");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("MEI HDCP");
diff --git a/drivers/misc/mei/hdcp/mei_hdcp.h b/drivers/misc/mei/hdcp/mei_hdcp.h
new file mode 100644
index 0000000000..0683d83ec1
--- /dev/null
+++ b/drivers/misc/mei/hdcp/mei_hdcp.h
@@ -0,0 +1,14 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright © 2019 Intel Corporation
+ *
+ * Authors:
+ * Ramalingam C <ramalingam.c@intel.com>
+ */
+
+#ifndef __MEI_HDCP_H__
+#define __MEI_HDCP_H__
+
+#include <drm/display/drm_hdcp.h>
+
+#endif /* __MEI_HDCP_H__ */