diff options
Diffstat (limited to 'drivers/misc/mei/hdcp')
| -rw-r--r-- | drivers/misc/mei/hdcp/Kconfig | 12 | ||||
| -rw-r--r-- | drivers/misc/mei/hdcp/Makefile | 7 | ||||
| -rw-r--r-- | drivers/misc/mei/hdcp/mei_hdcp.c | 879 | ||||
| -rw-r--r-- | drivers/misc/mei/hdcp/mei_hdcp.h | 14 |
4 files changed, 912 insertions, 0 deletions
diff --git a/drivers/misc/mei/hdcp/Kconfig b/drivers/misc/mei/hdcp/Kconfig new file mode 100644 index 0000000000..54e1c95269 --- /dev/null +++ b/drivers/misc/mei/hdcp/Kconfig @@ -0,0 +1,12 @@ +# SPDX-License-Identifier: GPL-2.0 +# Copyright (c) 2019, Intel Corporation. All rights reserved. +# +config INTEL_MEI_HDCP + tristate "Intel HDCP2.2 services of ME Interface" + select INTEL_MEI_ME + depends on DRM_I915 + help + MEI Support for HDCP2.2 Services on Intel platforms. + + Enables the ME FW services required for HDCP2.2 support through + I915 display driver of Intel. diff --git a/drivers/misc/mei/hdcp/Makefile b/drivers/misc/mei/hdcp/Makefile new file mode 100644 index 0000000000..3fbb56485c --- /dev/null +++ b/drivers/misc/mei/hdcp/Makefile @@ -0,0 +1,7 @@ +# SPDX-License-Identifier: GPL-2.0 +# +# Copyright (c) 2019, Intel Corporation. All rights reserved. +# +# Makefile - HDCP client driver for Intel MEI Bus Driver. + +obj-$(CONFIG_INTEL_MEI_HDCP) += mei_hdcp.o diff --git a/drivers/misc/mei/hdcp/mei_hdcp.c b/drivers/misc/mei/hdcp/mei_hdcp.c new file mode 100644 index 0000000000..51359cc5ec --- /dev/null +++ b/drivers/misc/mei/hdcp/mei_hdcp.c @@ -0,0 +1,879 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright © 2019 Intel Corporation + * + * mei_hdcp.c: HDCP client driver for mei bus + * + * Author: + * Ramalingam C <ramalingam.c@intel.com> + */ + +/** + * DOC: MEI_HDCP Client Driver + * + * The mei_hdcp driver acts as a translation layer between HDCP 2.2 + * protocol implementer (I915) and ME FW by translating HDCP2.2 + * negotiation messages to ME FW command payloads and vice versa. + */ + +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/mei.h> +#include <linux/mei_cl_bus.h> +#include <linux/component.h> +#include <drm/drm_connector.h> +#include <drm/i915_component.h> +#include <drm/i915_hdcp_interface.h> + +#include "mei_hdcp.h" + +/** + * mei_hdcp_initiate_session() - Initiate a Wired HDCP2.2 Tx Session in ME FW + * @dev: device corresponding to the mei_cl_device + * @data: Intel HW specific hdcp data + * @ake_data: AKE_Init msg output. + * + * Return: 0 on Success, <0 on Failure. + */ +static int +mei_hdcp_initiate_session(struct device *dev, struct hdcp_port_data *data, + struct hdcp2_ake_init *ake_data) +{ + struct wired_cmd_initiate_hdcp2_session_in session_init_in = { { 0 } }; + struct wired_cmd_initiate_hdcp2_session_out + session_init_out = { { 0 } }; + struct mei_cl_device *cldev; + ssize_t byte; + + if (!dev || !data || !ake_data) + return -EINVAL; + + cldev = to_mei_cl_device(dev); + + session_init_in.header.api_version = HDCP_API_VERSION; + session_init_in.header.command_id = WIRED_INITIATE_HDCP2_SESSION; + session_init_in.header.status = FW_HDCP_STATUS_SUCCESS; + session_init_in.header.buffer_len = + WIRED_CMD_BUF_LEN_INITIATE_HDCP2_SESSION_IN; + + session_init_in.port.integrated_port_type = data->port_type; + session_init_in.port.physical_port = (u8)data->hdcp_ddi; + session_init_in.port.attached_transcoder = (u8)data->hdcp_transcoder; + session_init_in.protocol = data->protocol; + + byte = mei_cldev_send(cldev, (u8 *)&session_init_in, + sizeof(session_init_in)); + if (byte < 0) { + dev_dbg(dev, "mei_cldev_send failed. %zd\n", byte); + return byte; + } + + byte = mei_cldev_recv(cldev, (u8 *)&session_init_out, + sizeof(session_init_out)); + if (byte < 0) { + dev_dbg(dev, "mei_cldev_recv failed. %zd\n", byte); + return byte; + } + + if (session_init_out.header.status != FW_HDCP_STATUS_SUCCESS) { + dev_dbg(dev, "ME cmd 0x%08X Failed. Status: 0x%X\n", + WIRED_INITIATE_HDCP2_SESSION, + session_init_out.header.status); + return -EIO; + } + + ake_data->msg_id = HDCP_2_2_AKE_INIT; + ake_data->tx_caps = session_init_out.tx_caps; + memcpy(ake_data->r_tx, session_init_out.r_tx, HDCP_2_2_RTX_LEN); + + return 0; +} + +/** + * mei_hdcp_verify_receiver_cert_prepare_km() - Verify the Receiver Certificate + * AKE_Send_Cert and prepare AKE_Stored_Km/AKE_No_Stored_Km + * @dev: device corresponding to the mei_cl_device + * @data: Intel HW specific hdcp data + * @rx_cert: AKE_Send_Cert for verification + * @km_stored: Pairing status flag output + * @ek_pub_km: AKE_Stored_Km/AKE_No_Stored_Km output msg + * @msg_sz : size of AKE_XXXXX_Km output msg + * + * Return: 0 on Success, <0 on Failure + */ +static int +mei_hdcp_verify_receiver_cert_prepare_km(struct device *dev, + struct hdcp_port_data *data, + struct hdcp2_ake_send_cert *rx_cert, + bool *km_stored, + struct hdcp2_ake_no_stored_km + *ek_pub_km, + size_t *msg_sz) +{ + struct wired_cmd_verify_receiver_cert_in verify_rxcert_in = { { 0 } }; + struct wired_cmd_verify_receiver_cert_out verify_rxcert_out = { { 0 } }; + struct mei_cl_device *cldev; + ssize_t byte; + + if (!dev || !data || !rx_cert || !km_stored || !ek_pub_km || !msg_sz) + return -EINVAL; + + cldev = to_mei_cl_device(dev); + + verify_rxcert_in.header.api_version = HDCP_API_VERSION; + verify_rxcert_in.header.command_id = WIRED_VERIFY_RECEIVER_CERT; + verify_rxcert_in.header.status = FW_HDCP_STATUS_SUCCESS; + verify_rxcert_in.header.buffer_len = + WIRED_CMD_BUF_LEN_VERIFY_RECEIVER_CERT_IN; + + verify_rxcert_in.port.integrated_port_type = data->port_type; + verify_rxcert_in.port.physical_port = (u8)data->hdcp_ddi; + verify_rxcert_in.port.attached_transcoder = (u8)data->hdcp_transcoder; + + verify_rxcert_in.cert_rx = rx_cert->cert_rx; + memcpy(verify_rxcert_in.r_rx, &rx_cert->r_rx, HDCP_2_2_RRX_LEN); + memcpy(verify_rxcert_in.rx_caps, rx_cert->rx_caps, HDCP_2_2_RXCAPS_LEN); + + byte = mei_cldev_send(cldev, (u8 *)&verify_rxcert_in, + sizeof(verify_rxcert_in)); + if (byte < 0) { + dev_dbg(dev, "mei_cldev_send failed: %zd\n", byte); + return byte; + } + + byte = mei_cldev_recv(cldev, (u8 *)&verify_rxcert_out, + sizeof(verify_rxcert_out)); + if (byte < 0) { + dev_dbg(dev, "mei_cldev_recv failed: %zd\n", byte); + return byte; + } + + if (verify_rxcert_out.header.status != FW_HDCP_STATUS_SUCCESS) { + dev_dbg(dev, "ME cmd 0x%08X Failed. Status: 0x%X\n", + WIRED_VERIFY_RECEIVER_CERT, + verify_rxcert_out.header.status); + return -EIO; + } + + *km_stored = !!verify_rxcert_out.km_stored; + if (verify_rxcert_out.km_stored) { + ek_pub_km->msg_id = HDCP_2_2_AKE_STORED_KM; + *msg_sz = sizeof(struct hdcp2_ake_stored_km); + } else { + ek_pub_km->msg_id = HDCP_2_2_AKE_NO_STORED_KM; + *msg_sz = sizeof(struct hdcp2_ake_no_stored_km); + } + + memcpy(ek_pub_km->e_kpub_km, &verify_rxcert_out.ekm_buff, + sizeof(verify_rxcert_out.ekm_buff)); + + return 0; +} + +/** + * mei_hdcp_verify_hprime() - Verify AKE_Send_H_prime at ME FW. + * @dev: device corresponding to the mei_cl_device + * @data: Intel HW specific hdcp data + * @rx_hprime: AKE_Send_H_prime msg for ME FW verification + * + * Return: 0 on Success, <0 on Failure + */ +static int +mei_hdcp_verify_hprime(struct device *dev, struct hdcp_port_data *data, + struct hdcp2_ake_send_hprime *rx_hprime) +{ + struct wired_cmd_ake_send_hprime_in send_hprime_in = { { 0 } }; + struct wired_cmd_ake_send_hprime_out send_hprime_out = { { 0 } }; + struct mei_cl_device *cldev; + ssize_t byte; + + if (!dev || !data || !rx_hprime) + return -EINVAL; + + cldev = to_mei_cl_device(dev); + + send_hprime_in.header.api_version = HDCP_API_VERSION; + send_hprime_in.header.command_id = WIRED_AKE_SEND_HPRIME; + send_hprime_in.header.status = FW_HDCP_STATUS_SUCCESS; + send_hprime_in.header.buffer_len = WIRED_CMD_BUF_LEN_AKE_SEND_HPRIME_IN; + + send_hprime_in.port.integrated_port_type = data->port_type; + send_hprime_in.port.physical_port = (u8)data->hdcp_ddi; + send_hprime_in.port.attached_transcoder = (u8)data->hdcp_transcoder; + + memcpy(send_hprime_in.h_prime, rx_hprime->h_prime, + HDCP_2_2_H_PRIME_LEN); + + byte = mei_cldev_send(cldev, (u8 *)&send_hprime_in, + sizeof(send_hprime_in)); + if (byte < 0) { + dev_dbg(dev, "mei_cldev_send failed. %zd\n", byte); + return byte; + } + + byte = mei_cldev_recv(cldev, (u8 *)&send_hprime_out, + sizeof(send_hprime_out)); + if (byte < 0) { + dev_dbg(dev, "mei_cldev_recv failed. %zd\n", byte); + return byte; + } + + if (send_hprime_out.header.status != FW_HDCP_STATUS_SUCCESS) { + dev_dbg(dev, "ME cmd 0x%08X Failed. Status: 0x%X\n", + WIRED_AKE_SEND_HPRIME, send_hprime_out.header.status); + return -EIO; + } + + return 0; +} + +/** + * mei_hdcp_store_pairing_info() - Store pairing info received at ME FW + * @dev: device corresponding to the mei_cl_device + * @data: Intel HW specific hdcp data + * @pairing_info: AKE_Send_Pairing_Info msg input to ME FW + * + * Return: 0 on Success, <0 on Failure + */ +static int +mei_hdcp_store_pairing_info(struct device *dev, struct hdcp_port_data *data, + struct hdcp2_ake_send_pairing_info *pairing_info) +{ + struct wired_cmd_ake_send_pairing_info_in pairing_info_in = { { 0 } }; + struct wired_cmd_ake_send_pairing_info_out pairing_info_out = { { 0 } }; + struct mei_cl_device *cldev; + ssize_t byte; + + if (!dev || !data || !pairing_info) + return -EINVAL; + + cldev = to_mei_cl_device(dev); + + pairing_info_in.header.api_version = HDCP_API_VERSION; + pairing_info_in.header.command_id = WIRED_AKE_SEND_PAIRING_INFO; + pairing_info_in.header.status = FW_HDCP_STATUS_SUCCESS; + pairing_info_in.header.buffer_len = + WIRED_CMD_BUF_LEN_SEND_PAIRING_INFO_IN; + + pairing_info_in.port.integrated_port_type = data->port_type; + pairing_info_in.port.physical_port = (u8)data->hdcp_ddi; + pairing_info_in.port.attached_transcoder = (u8)data->hdcp_transcoder; + + memcpy(pairing_info_in.e_kh_km, pairing_info->e_kh_km, + HDCP_2_2_E_KH_KM_LEN); + + byte = mei_cldev_send(cldev, (u8 *)&pairing_info_in, + sizeof(pairing_info_in)); + if (byte < 0) { + dev_dbg(dev, "mei_cldev_send failed. %zd\n", byte); + return byte; + } + + byte = mei_cldev_recv(cldev, (u8 *)&pairing_info_out, + sizeof(pairing_info_out)); + if (byte < 0) { + dev_dbg(dev, "mei_cldev_recv failed. %zd\n", byte); + return byte; + } + + if (pairing_info_out.header.status != FW_HDCP_STATUS_SUCCESS) { + dev_dbg(dev, "ME cmd 0x%08X failed. Status: 0x%X\n", + WIRED_AKE_SEND_PAIRING_INFO, + pairing_info_out.header.status); + return -EIO; + } + + return 0; +} + +/** + * mei_hdcp_initiate_locality_check() - Prepare LC_Init + * @dev: device corresponding to the mei_cl_device + * @data: Intel HW specific hdcp data + * @lc_init_data: LC_Init msg output + * + * Return: 0 on Success, <0 on Failure + */ +static int +mei_hdcp_initiate_locality_check(struct device *dev, + struct hdcp_port_data *data, + struct hdcp2_lc_init *lc_init_data) +{ + struct wired_cmd_init_locality_check_in lc_init_in = { { 0 } }; + struct wired_cmd_init_locality_check_out lc_init_out = { { 0 } }; + struct mei_cl_device *cldev; + ssize_t byte; + + if (!dev || !data || !lc_init_data) + return -EINVAL; + + cldev = to_mei_cl_device(dev); + + lc_init_in.header.api_version = HDCP_API_VERSION; + lc_init_in.header.command_id = WIRED_INIT_LOCALITY_CHECK; + lc_init_in.header.status = FW_HDCP_STATUS_SUCCESS; + lc_init_in.header.buffer_len = WIRED_CMD_BUF_LEN_INIT_LOCALITY_CHECK_IN; + + lc_init_in.port.integrated_port_type = data->port_type; + lc_init_in.port.physical_port = (u8)data->hdcp_ddi; + lc_init_in.port.attached_transcoder = (u8)data->hdcp_transcoder; + + byte = mei_cldev_send(cldev, (u8 *)&lc_init_in, sizeof(lc_init_in)); + if (byte < 0) { + dev_dbg(dev, "mei_cldev_send failed. %zd\n", byte); + return byte; + } + + byte = mei_cldev_recv(cldev, (u8 *)&lc_init_out, sizeof(lc_init_out)); + if (byte < 0) { + dev_dbg(dev, "mei_cldev_recv failed. %zd\n", byte); + return byte; + } + + if (lc_init_out.header.status != FW_HDCP_STATUS_SUCCESS) { + dev_dbg(dev, "ME cmd 0x%08X Failed. status: 0x%X\n", + WIRED_INIT_LOCALITY_CHECK, lc_init_out.header.status); + return -EIO; + } + + lc_init_data->msg_id = HDCP_2_2_LC_INIT; + memcpy(lc_init_data->r_n, lc_init_out.r_n, HDCP_2_2_RN_LEN); + + return 0; +} + +/** + * mei_hdcp_verify_lprime() - Verify lprime. + * @dev: device corresponding to the mei_cl_device + * @data: Intel HW specific hdcp data + * @rx_lprime: LC_Send_L_prime msg for ME FW verification + * + * Return: 0 on Success, <0 on Failure + */ +static int +mei_hdcp_verify_lprime(struct device *dev, struct hdcp_port_data *data, + struct hdcp2_lc_send_lprime *rx_lprime) +{ + struct wired_cmd_validate_locality_in verify_lprime_in = { { 0 } }; + struct wired_cmd_validate_locality_out verify_lprime_out = { { 0 } }; + struct mei_cl_device *cldev; + ssize_t byte; + + if (!dev || !data || !rx_lprime) + return -EINVAL; + + cldev = to_mei_cl_device(dev); + + verify_lprime_in.header.api_version = HDCP_API_VERSION; + verify_lprime_in.header.command_id = WIRED_VALIDATE_LOCALITY; + verify_lprime_in.header.status = FW_HDCP_STATUS_SUCCESS; + verify_lprime_in.header.buffer_len = + WIRED_CMD_BUF_LEN_VALIDATE_LOCALITY_IN; + + verify_lprime_in.port.integrated_port_type = data->port_type; + verify_lprime_in.port.physical_port = (u8)data->hdcp_ddi; + verify_lprime_in.port.attached_transcoder = (u8)data->hdcp_transcoder; + + memcpy(verify_lprime_in.l_prime, rx_lprime->l_prime, + HDCP_2_2_L_PRIME_LEN); + + byte = mei_cldev_send(cldev, (u8 *)&verify_lprime_in, + sizeof(verify_lprime_in)); + if (byte < 0) { + dev_dbg(dev, "mei_cldev_send failed. %zd\n", byte); + return byte; + } + + byte = mei_cldev_recv(cldev, (u8 *)&verify_lprime_out, + sizeof(verify_lprime_out)); + if (byte < 0) { + dev_dbg(dev, "mei_cldev_recv failed. %zd\n", byte); + return byte; + } + + if (verify_lprime_out.header.status != FW_HDCP_STATUS_SUCCESS) { + dev_dbg(dev, "ME cmd 0x%08X failed. status: 0x%X\n", + WIRED_VALIDATE_LOCALITY, + verify_lprime_out.header.status); + return -EIO; + } + + return 0; +} + +/** + * mei_hdcp_get_session_key() - Prepare SKE_Send_Eks. + * @dev: device corresponding to the mei_cl_device + * @data: Intel HW specific hdcp data + * @ske_data: SKE_Send_Eks msg output from ME FW. + * + * Return: 0 on Success, <0 on Failure + */ +static int mei_hdcp_get_session_key(struct device *dev, + struct hdcp_port_data *data, + struct hdcp2_ske_send_eks *ske_data) +{ + struct wired_cmd_get_session_key_in get_skey_in = { { 0 } }; + struct wired_cmd_get_session_key_out get_skey_out = { { 0 } }; + struct mei_cl_device *cldev; + ssize_t byte; + + if (!dev || !data || !ske_data) + return -EINVAL; + + cldev = to_mei_cl_device(dev); + + get_skey_in.header.api_version = HDCP_API_VERSION; + get_skey_in.header.command_id = WIRED_GET_SESSION_KEY; + get_skey_in.header.status = FW_HDCP_STATUS_SUCCESS; + get_skey_in.header.buffer_len = WIRED_CMD_BUF_LEN_GET_SESSION_KEY_IN; + + get_skey_in.port.integrated_port_type = data->port_type; + get_skey_in.port.physical_port = (u8)data->hdcp_ddi; + get_skey_in.port.attached_transcoder = (u8)data->hdcp_transcoder; + + byte = mei_cldev_send(cldev, (u8 *)&get_skey_in, sizeof(get_skey_in)); + if (byte < 0) { + dev_dbg(dev, "mei_cldev_send failed. %zd\n", byte); + return byte; + } + + byte = mei_cldev_recv(cldev, (u8 *)&get_skey_out, sizeof(get_skey_out)); + + if (byte < 0) { + dev_dbg(dev, "mei_cldev_recv failed. %zd\n", byte); + return byte; + } + + if (get_skey_out.header.status != FW_HDCP_STATUS_SUCCESS) { + dev_dbg(dev, "ME cmd 0x%08X failed. status: 0x%X\n", + WIRED_GET_SESSION_KEY, get_skey_out.header.status); + return -EIO; + } + + ske_data->msg_id = HDCP_2_2_SKE_SEND_EKS; + memcpy(ske_data->e_dkey_ks, get_skey_out.e_dkey_ks, + HDCP_2_2_E_DKEY_KS_LEN); + memcpy(ske_data->riv, get_skey_out.r_iv, HDCP_2_2_RIV_LEN); + + return 0; +} + +/** + * mei_hdcp_repeater_check_flow_prepare_ack() - Validate the Downstream topology + * and prepare rep_ack. + * @dev: device corresponding to the mei_cl_device + * @data: Intel HW specific hdcp data + * @rep_topology: Receiver ID List to be validated + * @rep_send_ack : repeater ack from ME FW. + * + * Return: 0 on Success, <0 on Failure + */ +static int +mei_hdcp_repeater_check_flow_prepare_ack(struct device *dev, + struct hdcp_port_data *data, + struct hdcp2_rep_send_receiverid_list + *rep_topology, + struct hdcp2_rep_send_ack + *rep_send_ack) +{ + struct wired_cmd_verify_repeater_in verify_repeater_in = { { 0 } }; + struct wired_cmd_verify_repeater_out verify_repeater_out = { { 0 } }; + struct mei_cl_device *cldev; + ssize_t byte; + + if (!dev || !rep_topology || !rep_send_ack || !data) + return -EINVAL; + + cldev = to_mei_cl_device(dev); + + verify_repeater_in.header.api_version = HDCP_API_VERSION; + verify_repeater_in.header.command_id = WIRED_VERIFY_REPEATER; + verify_repeater_in.header.status = FW_HDCP_STATUS_SUCCESS; + verify_repeater_in.header.buffer_len = + WIRED_CMD_BUF_LEN_VERIFY_REPEATER_IN; + + verify_repeater_in.port.integrated_port_type = data->port_type; + verify_repeater_in.port.physical_port = (u8)data->hdcp_ddi; + verify_repeater_in.port.attached_transcoder = (u8)data->hdcp_transcoder; + + memcpy(verify_repeater_in.rx_info, rep_topology->rx_info, + HDCP_2_2_RXINFO_LEN); + memcpy(verify_repeater_in.seq_num_v, rep_topology->seq_num_v, + HDCP_2_2_SEQ_NUM_LEN); + memcpy(verify_repeater_in.v_prime, rep_topology->v_prime, + HDCP_2_2_V_PRIME_HALF_LEN); + memcpy(verify_repeater_in.receiver_ids, rep_topology->receiver_ids, + HDCP_2_2_RECEIVER_IDS_MAX_LEN); + + byte = mei_cldev_send(cldev, (u8 *)&verify_repeater_in, + sizeof(verify_repeater_in)); + if (byte < 0) { + dev_dbg(dev, "mei_cldev_send failed. %zd\n", byte); + return byte; + } + + byte = mei_cldev_recv(cldev, (u8 *)&verify_repeater_out, + sizeof(verify_repeater_out)); + if (byte < 0) { + dev_dbg(dev, "mei_cldev_recv failed. %zd\n", byte); + return byte; + } + + if (verify_repeater_out.header.status != FW_HDCP_STATUS_SUCCESS) { + dev_dbg(dev, "ME cmd 0x%08X failed. status: 0x%X\n", + WIRED_VERIFY_REPEATER, + verify_repeater_out.header.status); + return -EIO; + } + + memcpy(rep_send_ack->v, verify_repeater_out.v, + HDCP_2_2_V_PRIME_HALF_LEN); + rep_send_ack->msg_id = HDCP_2_2_REP_SEND_ACK; + + return 0; +} + +/** + * mei_hdcp_verify_mprime() - Verify mprime. + * @dev: device corresponding to the mei_cl_device + * @data: Intel HW specific hdcp data + * @stream_ready: RepeaterAuth_Stream_Ready msg for ME FW verification. + * + * Return: 0 on Success, <0 on Failure + */ +static int mei_hdcp_verify_mprime(struct device *dev, + struct hdcp_port_data *data, + struct hdcp2_rep_stream_ready *stream_ready) +{ + struct wired_cmd_repeater_auth_stream_req_in *verify_mprime_in; + struct wired_cmd_repeater_auth_stream_req_out + verify_mprime_out = { { 0 } }; + struct mei_cl_device *cldev; + ssize_t byte; + size_t cmd_size; + + if (!dev || !stream_ready || !data) + return -EINVAL; + + cldev = to_mei_cl_device(dev); + + cmd_size = struct_size(verify_mprime_in, streams, data->k); + if (cmd_size == SIZE_MAX) + return -EINVAL; + + verify_mprime_in = kzalloc(cmd_size, GFP_KERNEL); + if (!verify_mprime_in) + return -ENOMEM; + + verify_mprime_in->header.api_version = HDCP_API_VERSION; + verify_mprime_in->header.command_id = WIRED_REPEATER_AUTH_STREAM_REQ; + verify_mprime_in->header.status = FW_HDCP_STATUS_SUCCESS; + verify_mprime_in->header.buffer_len = cmd_size - sizeof(verify_mprime_in->header); + + verify_mprime_in->port.integrated_port_type = data->port_type; + verify_mprime_in->port.physical_port = (u8)data->hdcp_ddi; + verify_mprime_in->port.attached_transcoder = (u8)data->hdcp_transcoder; + + memcpy(verify_mprime_in->m_prime, stream_ready->m_prime, HDCP_2_2_MPRIME_LEN); + drm_hdcp_cpu_to_be24(verify_mprime_in->seq_num_m, data->seq_num_m); + + memcpy(verify_mprime_in->streams, data->streams, + array_size(data->k, sizeof(*data->streams))); + + verify_mprime_in->k = cpu_to_be16(data->k); + + byte = mei_cldev_send(cldev, (u8 *)verify_mprime_in, cmd_size); + kfree(verify_mprime_in); + if (byte < 0) { + dev_dbg(dev, "mei_cldev_send failed. %zd\n", byte); + return byte; + } + + byte = mei_cldev_recv(cldev, (u8 *)&verify_mprime_out, + sizeof(verify_mprime_out)); + if (byte < 0) { + dev_dbg(dev, "mei_cldev_recv failed. %zd\n", byte); + return byte; + } + + if (verify_mprime_out.header.status != FW_HDCP_STATUS_SUCCESS) { + dev_dbg(dev, "ME cmd 0x%08X failed. status: 0x%X\n", + WIRED_REPEATER_AUTH_STREAM_REQ, + verify_mprime_out.header.status); + return -EIO; + } + + return 0; +} + +/** + * mei_hdcp_enable_authentication() - Mark a port as authenticated + * through ME FW + * @dev: device corresponding to the mei_cl_device + * @data: Intel HW specific hdcp data + * + * Return: 0 on Success, <0 on Failure + */ +static int mei_hdcp_enable_authentication(struct device *dev, + struct hdcp_port_data *data) +{ + struct wired_cmd_enable_auth_in enable_auth_in = { { 0 } }; + struct wired_cmd_enable_auth_out enable_auth_out = { { 0 } }; + struct mei_cl_device *cldev; + ssize_t byte; + + if (!dev || !data) + return -EINVAL; + + cldev = to_mei_cl_device(dev); + + enable_auth_in.header.api_version = HDCP_API_VERSION; + enable_auth_in.header.command_id = WIRED_ENABLE_AUTH; + enable_auth_in.header.status = FW_HDCP_STATUS_SUCCESS; + enable_auth_in.header.buffer_len = WIRED_CMD_BUF_LEN_ENABLE_AUTH_IN; + + enable_auth_in.port.integrated_port_type = data->port_type; + enable_auth_in.port.physical_port = (u8)data->hdcp_ddi; + enable_auth_in.port.attached_transcoder = (u8)data->hdcp_transcoder; + enable_auth_in.stream_type = data->streams[0].stream_type; + + byte = mei_cldev_send(cldev, (u8 *)&enable_auth_in, + sizeof(enable_auth_in)); + if (byte < 0) { + dev_dbg(dev, "mei_cldev_send failed. %zd\n", byte); + return byte; + } + + byte = mei_cldev_recv(cldev, (u8 *)&enable_auth_out, + sizeof(enable_auth_out)); + if (byte < 0) { + dev_dbg(dev, "mei_cldev_recv failed. %zd\n", byte); + return byte; + } + + if (enable_auth_out.header.status != FW_HDCP_STATUS_SUCCESS) { + dev_dbg(dev, "ME cmd 0x%08X failed. status: 0x%X\n", + WIRED_ENABLE_AUTH, enable_auth_out.header.status); + return -EIO; + } + + return 0; +} + +/** + * mei_hdcp_close_session() - Close the Wired HDCP Tx session of ME FW per port. + * This also disables the authenticated state of the port. + * @dev: device corresponding to the mei_cl_device + * @data: Intel HW specific hdcp data + * + * Return: 0 on Success, <0 on Failure + */ +static int +mei_hdcp_close_session(struct device *dev, struct hdcp_port_data *data) +{ + struct wired_cmd_close_session_in session_close_in = { { 0 } }; + struct wired_cmd_close_session_out session_close_out = { { 0 } }; + struct mei_cl_device *cldev; + ssize_t byte; + + if (!dev || !data) + return -EINVAL; + + cldev = to_mei_cl_device(dev); + + session_close_in.header.api_version = HDCP_API_VERSION; + session_close_in.header.command_id = WIRED_CLOSE_SESSION; + session_close_in.header.status = FW_HDCP_STATUS_SUCCESS; + session_close_in.header.buffer_len = + WIRED_CMD_BUF_LEN_CLOSE_SESSION_IN; + + session_close_in.port.integrated_port_type = data->port_type; + session_close_in.port.physical_port = (u8)data->hdcp_ddi; + session_close_in.port.attached_transcoder = (u8)data->hdcp_transcoder; + + byte = mei_cldev_send(cldev, (u8 *)&session_close_in, + sizeof(session_close_in)); + if (byte < 0) { + dev_dbg(dev, "mei_cldev_send failed. %zd\n", byte); + return byte; + } + + byte = mei_cldev_recv(cldev, (u8 *)&session_close_out, + sizeof(session_close_out)); + if (byte < 0) { + dev_dbg(dev, "mei_cldev_recv failed. %zd\n", byte); + return byte; + } + + if (session_close_out.header.status != FW_HDCP_STATUS_SUCCESS) { + dev_dbg(dev, "Session Close Failed. status: 0x%X\n", + session_close_out.header.status); + return -EIO; + } + + return 0; +} + +static const struct i915_hdcp_ops mei_hdcp_ops = { + .owner = THIS_MODULE, + .initiate_hdcp2_session = mei_hdcp_initiate_session, + .verify_receiver_cert_prepare_km = + mei_hdcp_verify_receiver_cert_prepare_km, + .verify_hprime = mei_hdcp_verify_hprime, + .store_pairing_info = mei_hdcp_store_pairing_info, + .initiate_locality_check = mei_hdcp_initiate_locality_check, + .verify_lprime = mei_hdcp_verify_lprime, + .get_session_key = mei_hdcp_get_session_key, + .repeater_check_flow_prepare_ack = + mei_hdcp_repeater_check_flow_prepare_ack, + .verify_mprime = mei_hdcp_verify_mprime, + .enable_hdcp_authentication = mei_hdcp_enable_authentication, + .close_hdcp_session = mei_hdcp_close_session, +}; + +static int mei_component_master_bind(struct device *dev) +{ + struct mei_cl_device *cldev = to_mei_cl_device(dev); + struct i915_hdcp_arbiter *comp_arbiter = mei_cldev_get_drvdata(cldev); + int ret; + + dev_dbg(dev, "%s\n", __func__); + comp_arbiter->ops = &mei_hdcp_ops; + comp_arbiter->hdcp_dev = dev; + ret = component_bind_all(dev, comp_arbiter); + if (ret < 0) + return ret; + + return 0; +} + +static void mei_component_master_unbind(struct device *dev) +{ + struct mei_cl_device *cldev = to_mei_cl_device(dev); + struct i915_hdcp_arbiter *comp_arbiter = mei_cldev_get_drvdata(cldev); + + dev_dbg(dev, "%s\n", __func__); + component_unbind_all(dev, comp_arbiter); +} + +static const struct component_master_ops mei_component_master_ops = { + .bind = mei_component_master_bind, + .unbind = mei_component_master_unbind, +}; + +/** + * mei_hdcp_component_match - compare function for matching mei hdcp. + * + * The function checks if the driver is i915, the subcomponent is HDCP + * and the grand parent of hdcp and the parent of i915 are the same + * PCH device. + * + * @dev: master device + * @subcomponent: subcomponent to match (I915_COMPONENT_HDCP) + * @data: compare data (mei hdcp device) + * + * Return: + * * 1 - if components match + * * 0 - otherwise + */ +static int mei_hdcp_component_match(struct device *dev, int subcomponent, + void *data) +{ + struct device *base = data; + + if (!dev->driver || strcmp(dev->driver->name, "i915") || + subcomponent != I915_COMPONENT_HDCP) + return 0; + + base = base->parent; + if (!base) + return 0; + + base = base->parent; + dev = dev->parent; + + return (base && dev && dev == base); +} + +static int mei_hdcp_probe(struct mei_cl_device *cldev, + const struct mei_cl_device_id *id) +{ + struct i915_hdcp_arbiter *comp_arbiter; + struct component_match *master_match; + int ret; + + ret = mei_cldev_enable(cldev); + if (ret < 0) { + dev_err(&cldev->dev, "mei_cldev_enable Failed. %d\n", ret); + goto enable_err_exit; + } + + comp_arbiter = kzalloc(sizeof(*comp_arbiter), GFP_KERNEL); + if (!comp_arbiter) { + ret = -ENOMEM; + goto err_exit; + } + + master_match = NULL; + component_match_add_typed(&cldev->dev, &master_match, + mei_hdcp_component_match, &cldev->dev); + if (IS_ERR_OR_NULL(master_match)) { + ret = -ENOMEM; + goto err_exit; + } + + mei_cldev_set_drvdata(cldev, comp_arbiter); + ret = component_master_add_with_match(&cldev->dev, + &mei_component_master_ops, + master_match); + if (ret < 0) { + dev_err(&cldev->dev, "Master comp add failed %d\n", ret); + goto err_exit; + } + + return 0; + +err_exit: + mei_cldev_set_drvdata(cldev, NULL); + kfree(comp_arbiter); + mei_cldev_disable(cldev); +enable_err_exit: + return ret; +} + +static void mei_hdcp_remove(struct mei_cl_device *cldev) +{ + struct i915_hdcp_arbiter *comp_arbiter = mei_cldev_get_drvdata(cldev); + int ret; + + component_master_del(&cldev->dev, &mei_component_master_ops); + kfree(comp_arbiter); + mei_cldev_set_drvdata(cldev, NULL); + + ret = mei_cldev_disable(cldev); + if (ret) + dev_warn(&cldev->dev, "mei_cldev_disable() failed\n"); +} + +#define MEI_UUID_HDCP UUID_LE(0xB638AB7E, 0x94E2, 0x4EA2, 0xA5, \ + 0x52, 0xD1, 0xC5, 0x4B, 0x62, 0x7F, 0x04) + +static const struct mei_cl_device_id mei_hdcp_tbl[] = { + { .uuid = MEI_UUID_HDCP, .version = MEI_CL_VERSION_ANY }, + { } +}; +MODULE_DEVICE_TABLE(mei, mei_hdcp_tbl); + +static struct mei_cl_driver mei_hdcp_driver = { + .id_table = mei_hdcp_tbl, + .name = KBUILD_MODNAME, + .probe = mei_hdcp_probe, + .remove = mei_hdcp_remove, +}; + +module_mei_cl_driver(mei_hdcp_driver); + +MODULE_AUTHOR("Intel Corporation"); +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("MEI HDCP"); diff --git a/drivers/misc/mei/hdcp/mei_hdcp.h b/drivers/misc/mei/hdcp/mei_hdcp.h new file mode 100644 index 0000000000..0683d83ec1 --- /dev/null +++ b/drivers/misc/mei/hdcp/mei_hdcp.h @@ -0,0 +1,14 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright © 2019 Intel Corporation + * + * Authors: + * Ramalingam C <ramalingam.c@intel.com> + */ + +#ifndef __MEI_HDCP_H__ +#define __MEI_HDCP_H__ + +#include <drm/display/drm_hdcp.h> + +#endif /* __MEI_HDCP_H__ */ |