diff options
Diffstat (limited to 'drivers/misc/mei/hw-me.c')
| -rw-r--r-- | drivers/misc/mei/hw-me.c | 1770 |
1 files changed, 1770 insertions, 0 deletions
diff --git a/drivers/misc/mei/hw-me.c b/drivers/misc/mei/hw-me.c new file mode 100644 index 0000000000..da4ef0b519 --- /dev/null +++ b/drivers/misc/mei/hw-me.c @@ -0,0 +1,1770 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2003-2022, Intel Corporation. All rights reserved. + * Intel Management Engine Interface (Intel MEI) Linux driver + */ + +#include <linux/pci.h> + +#include <linux/kthread.h> +#include <linux/interrupt.h> +#include <linux/pm_runtime.h> +#include <linux/sizes.h> +#include <linux/delay.h> + +#include "mei_dev.h" +#include "hbm.h" + +#include "hw-me.h" +#include "hw-me-regs.h" + +#include "mei-trace.h" + +/** + * mei_me_reg_read - Reads 32bit data from the mei device + * + * @hw: the me hardware structure + * @offset: offset from which to read the data + * + * Return: register value (u32) + */ +static inline u32 mei_me_reg_read(const struct mei_me_hw *hw, + unsigned long offset) +{ + return ioread32(hw->mem_addr + offset); +} + + +/** + * mei_me_reg_write - Writes 32bit data to the mei device + * + * @hw: the me hardware structure + * @offset: offset from which to write the data + * @value: register value to write (u32) + */ +static inline void mei_me_reg_write(const struct mei_me_hw *hw, + unsigned long offset, u32 value) +{ + iowrite32(value, hw->mem_addr + offset); +} + +/** + * mei_me_mecbrw_read - Reads 32bit data from ME circular buffer + * read window register + * + * @dev: the device structure + * + * Return: ME_CB_RW register value (u32) + */ +static inline u32 mei_me_mecbrw_read(const struct mei_device *dev) +{ + return mei_me_reg_read(to_me_hw(dev), ME_CB_RW); +} + +/** + * mei_me_hcbww_write - write 32bit data to the host circular buffer + * + * @dev: the device structure + * @data: 32bit data to be written to the host circular buffer + */ +static inline void mei_me_hcbww_write(struct mei_device *dev, u32 data) +{ + mei_me_reg_write(to_me_hw(dev), H_CB_WW, data); +} + +/** + * mei_me_mecsr_read - Reads 32bit data from the ME CSR + * + * @dev: the device structure + * + * Return: ME_CSR_HA register value (u32) + */ +static inline u32 mei_me_mecsr_read(const struct mei_device *dev) +{ + u32 reg; + + reg = mei_me_reg_read(to_me_hw(dev), ME_CSR_HA); + trace_mei_reg_read(dev->dev, "ME_CSR_HA", ME_CSR_HA, reg); + + return reg; +} + +/** + * mei_hcsr_read - Reads 32bit data from the host CSR + * + * @dev: the device structure + * + * Return: H_CSR register value (u32) + */ +static inline u32 mei_hcsr_read(const struct mei_device *dev) +{ + u32 reg; + + reg = mei_me_reg_read(to_me_hw(dev), H_CSR); + trace_mei_reg_read(dev->dev, "H_CSR", H_CSR, reg); + + return reg; +} + +/** + * mei_hcsr_write - writes H_CSR register to the mei device + * + * @dev: the device structure + * @reg: new register value + */ +static inline void mei_hcsr_write(struct mei_device *dev, u32 reg) +{ + trace_mei_reg_write(dev->dev, "H_CSR", H_CSR, reg); + mei_me_reg_write(to_me_hw(dev), H_CSR, reg); +} + +/** + * mei_hcsr_set - writes H_CSR register to the mei device, + * and ignores the H_IS bit for it is write-one-to-zero. + * + * @dev: the device structure + * @reg: new register value + */ +static inline void mei_hcsr_set(struct mei_device *dev, u32 reg) +{ + reg &= ~H_CSR_IS_MASK; + mei_hcsr_write(dev, reg); +} + +/** + * mei_hcsr_set_hig - set host interrupt (set H_IG) + * + * @dev: the device structure + */ +static inline void mei_hcsr_set_hig(struct mei_device *dev) +{ + u32 hcsr; + + hcsr = mei_hcsr_read(dev) | H_IG; + mei_hcsr_set(dev, hcsr); +} + +/** + * mei_me_d0i3c_read - Reads 32bit data from the D0I3C register + * + * @dev: the device structure + * + * Return: H_D0I3C register value (u32) + */ +static inline u32 mei_me_d0i3c_read(const struct mei_device *dev) +{ + u32 reg; + + reg = mei_me_reg_read(to_me_hw(dev), H_D0I3C); + trace_mei_reg_read(dev->dev, "H_D0I3C", H_D0I3C, reg); + + return reg; +} + +/** + * mei_me_d0i3c_write - writes H_D0I3C register to device + * + * @dev: the device structure + * @reg: new register value + */ +static inline void mei_me_d0i3c_write(struct mei_device *dev, u32 reg) +{ + trace_mei_reg_write(dev->dev, "H_D0I3C", H_D0I3C, reg); + mei_me_reg_write(to_me_hw(dev), H_D0I3C, reg); +} + +/** + * mei_me_trc_status - read trc status register + * + * @dev: mei device + * @trc: trc status register value + * + * Return: 0 on success, error otherwise + */ +static int mei_me_trc_status(struct mei_device *dev, u32 *trc) +{ + struct mei_me_hw *hw = to_me_hw(dev); + + if (!hw->cfg->hw_trc_supported) + return -EOPNOTSUPP; + + *trc = mei_me_reg_read(hw, ME_TRC); + trace_mei_reg_read(dev->dev, "ME_TRC", ME_TRC, *trc); + + return 0; +} + +/** + * mei_me_fw_status - read fw status register from pci config space + * + * @dev: mei device + * @fw_status: fw status register values + * + * Return: 0 on success, error otherwise + */ +static int mei_me_fw_status(struct mei_device *dev, + struct mei_fw_status *fw_status) +{ + struct mei_me_hw *hw = to_me_hw(dev); + const struct mei_fw_status *fw_src = &hw->cfg->fw_status; + int ret; + int i; + + if (!fw_status || !hw->read_fws) + return -EINVAL; + + fw_status->count = fw_src->count; + for (i = 0; i < fw_src->count && i < MEI_FW_STATUS_MAX; i++) { + ret = hw->read_fws(dev, fw_src->status[i], + &fw_status->status[i]); + trace_mei_pci_cfg_read(dev->dev, "PCI_CFG_HFS_X", + fw_src->status[i], + fw_status->status[i]); + if (ret) + return ret; + } + + return 0; +} + +/** + * mei_me_hw_config - configure hw dependent settings + * + * @dev: mei device + * + * Return: + * * -EINVAL when read_fws is not set + * * 0 on success + * + */ +static int mei_me_hw_config(struct mei_device *dev) +{ + struct mei_me_hw *hw = to_me_hw(dev); + u32 hcsr, reg; + + if (WARN_ON(!hw->read_fws)) + return -EINVAL; + + /* Doesn't change in runtime */ + hcsr = mei_hcsr_read(dev); + hw->hbuf_depth = (hcsr & H_CBD) >> 24; + + reg = 0; + hw->read_fws(dev, PCI_CFG_HFS_1, ®); + trace_mei_pci_cfg_read(dev->dev, "PCI_CFG_HFS_1", PCI_CFG_HFS_1, reg); + hw->d0i3_supported = + ((reg & PCI_CFG_HFS_1_D0I3_MSK) == PCI_CFG_HFS_1_D0I3_MSK); + + hw->pg_state = MEI_PG_OFF; + if (hw->d0i3_supported) { + reg = mei_me_d0i3c_read(dev); + if (reg & H_D0I3C_I3) + hw->pg_state = MEI_PG_ON; + } + + return 0; +} + +/** + * mei_me_pg_state - translate internal pg state + * to the mei power gating state + * + * @dev: mei device + * + * Return: MEI_PG_OFF if aliveness is on and MEI_PG_ON otherwise + */ +static inline enum mei_pg_state mei_me_pg_state(struct mei_device *dev) +{ + struct mei_me_hw *hw = to_me_hw(dev); + + return hw->pg_state; +} + +static inline u32 me_intr_src(u32 hcsr) +{ + return hcsr & H_CSR_IS_MASK; +} + +/** + * me_intr_disable - disables mei device interrupts + * using supplied hcsr register value. + * + * @dev: the device structure + * @hcsr: supplied hcsr register value + */ +static inline void me_intr_disable(struct mei_device *dev, u32 hcsr) +{ + hcsr &= ~H_CSR_IE_MASK; + mei_hcsr_set(dev, hcsr); +} + +/** + * me_intr_clear - clear and stop interrupts + * + * @dev: the device structure + * @hcsr: supplied hcsr register value + */ +static inline void me_intr_clear(struct mei_device *dev, u32 hcsr) +{ + if (me_intr_src(hcsr)) + mei_hcsr_write(dev, hcsr); +} + +/** + * mei_me_intr_clear - clear and stop interrupts + * + * @dev: the device structure + */ +static void mei_me_intr_clear(struct mei_device *dev) +{ + u32 hcsr = mei_hcsr_read(dev); + + me_intr_clear(dev, hcsr); +} +/** + * mei_me_intr_enable - enables mei device interrupts + * + * @dev: the device structure + */ +static void mei_me_intr_enable(struct mei_device *dev) +{ + u32 hcsr; + + if (mei_me_hw_use_polling(to_me_hw(dev))) + return; + + hcsr = mei_hcsr_read(dev) | H_CSR_IE_MASK; + mei_hcsr_set(dev, hcsr); +} + +/** + * mei_me_intr_disable - disables mei device interrupts + * + * @dev: the device structure + */ +static void mei_me_intr_disable(struct mei_device *dev) +{ + u32 hcsr = mei_hcsr_read(dev); + + me_intr_disable(dev, hcsr); +} + +/** + * mei_me_synchronize_irq - wait for pending IRQ handlers + * + * @dev: the device structure + */ +static void mei_me_synchronize_irq(struct mei_device *dev) +{ + struct mei_me_hw *hw = to_me_hw(dev); + + if (mei_me_hw_use_polling(hw)) + return; + + synchronize_irq(hw->irq); +} + +/** + * mei_me_hw_reset_release - release device from the reset + * + * @dev: the device structure + */ +static void mei_me_hw_reset_release(struct mei_device *dev) +{ + u32 hcsr = mei_hcsr_read(dev); + + hcsr |= H_IG; + hcsr &= ~H_RST; + mei_hcsr_set(dev, hcsr); +} + +/** + * mei_me_host_set_ready - enable device + * + * @dev: mei device + */ +static void mei_me_host_set_ready(struct mei_device *dev) +{ + u32 hcsr = mei_hcsr_read(dev); + + if (!mei_me_hw_use_polling(to_me_hw(dev))) + hcsr |= H_CSR_IE_MASK; + + hcsr |= H_IG | H_RDY; + mei_hcsr_set(dev, hcsr); +} + +/** + * mei_me_host_is_ready - check whether the host has turned ready + * + * @dev: mei device + * Return: bool + */ +static bool mei_me_host_is_ready(struct mei_device *dev) +{ + u32 hcsr = mei_hcsr_read(dev); + + return (hcsr & H_RDY) == H_RDY; +} + +/** + * mei_me_hw_is_ready - check whether the me(hw) has turned ready + * + * @dev: mei device + * Return: bool + */ +static bool mei_me_hw_is_ready(struct mei_device *dev) +{ + u32 mecsr = mei_me_mecsr_read(dev); + + return (mecsr & ME_RDY_HRA) == ME_RDY_HRA; +} + +/** + * mei_me_hw_is_resetting - check whether the me(hw) is in reset + * + * @dev: mei device + * Return: bool + */ +static bool mei_me_hw_is_resetting(struct mei_device *dev) +{ + u32 mecsr = mei_me_mecsr_read(dev); + + return (mecsr & ME_RST_HRA) == ME_RST_HRA; +} + +/** + * mei_gsc_pxp_check - check for gsc firmware entering pxp mode + * + * @dev: the device structure + */ +static void mei_gsc_pxp_check(struct mei_device *dev) +{ + struct mei_me_hw *hw = to_me_hw(dev); + u32 fwsts5 = 0; + + if (dev->pxp_mode == MEI_DEV_PXP_DEFAULT) + return; + + hw->read_fws(dev, PCI_CFG_HFS_5, &fwsts5); + trace_mei_pci_cfg_read(dev->dev, "PCI_CFG_HFS_5", PCI_CFG_HFS_5, fwsts5); + if ((fwsts5 & GSC_CFG_HFS_5_BOOT_TYPE_MSK) == GSC_CFG_HFS_5_BOOT_TYPE_PXP) { + dev_dbg(dev->dev, "pxp mode is ready 0x%08x\n", fwsts5); + dev->pxp_mode = MEI_DEV_PXP_READY; + } else { + dev_dbg(dev->dev, "pxp mode is not ready 0x%08x\n", fwsts5); + } +} + +/** + * mei_me_hw_ready_wait - wait until the me(hw) has turned ready + * or timeout is reached + * + * @dev: mei device + * Return: 0 on success, error otherwise + */ +static int mei_me_hw_ready_wait(struct mei_device *dev) +{ + mutex_unlock(&dev->device_lock); + wait_event_timeout(dev->wait_hw_ready, + dev->recvd_hw_ready, + dev->timeouts.hw_ready); + mutex_lock(&dev->device_lock); + if (!dev->recvd_hw_ready) { + dev_err(dev->dev, "wait hw ready failed\n"); + return -ETIME; + } + + mei_gsc_pxp_check(dev); + + mei_me_hw_reset_release(dev); + dev->recvd_hw_ready = false; + return 0; +} + +/** + * mei_me_hw_start - hw start routine + * + * @dev: mei device + * Return: 0 on success, error otherwise + */ +static int mei_me_hw_start(struct mei_device *dev) +{ + int ret = mei_me_hw_ready_wait(dev); + + if (ret) + return ret; + dev_dbg(dev->dev, "hw is ready\n"); + + mei_me_host_set_ready(dev); + return ret; +} + + +/** + * mei_hbuf_filled_slots - gets number of device filled buffer slots + * + * @dev: the device structure + * + * Return: number of filled slots + */ +static unsigned char mei_hbuf_filled_slots(struct mei_device *dev) +{ + u32 hcsr; + char read_ptr, write_ptr; + + hcsr = mei_hcsr_read(dev); + + read_ptr = (char) ((hcsr & H_CBRP) >> 8); + write_ptr = (char) ((hcsr & H_CBWP) >> 16); + + return (unsigned char) (write_ptr - read_ptr); +} + +/** + * mei_me_hbuf_is_empty - checks if host buffer is empty. + * + * @dev: the device structure + * + * Return: true if empty, false - otherwise. + */ +static bool mei_me_hbuf_is_empty(struct mei_device *dev) +{ + return mei_hbuf_filled_slots(dev) == 0; +} + +/** + * mei_me_hbuf_empty_slots - counts write empty slots. + * + * @dev: the device structure + * + * Return: -EOVERFLOW if overflow, otherwise empty slots count + */ +static int mei_me_hbuf_empty_slots(struct mei_device *dev) +{ + struct mei_me_hw *hw = to_me_hw(dev); + unsigned char filled_slots, empty_slots; + + filled_slots = mei_hbuf_filled_slots(dev); + empty_slots = hw->hbuf_depth - filled_slots; + + /* check for overflow */ + if (filled_slots > hw->hbuf_depth) + return -EOVERFLOW; + + return empty_slots; +} + +/** + * mei_me_hbuf_depth - returns depth of the hw buffer. + * + * @dev: the device structure + * + * Return: size of hw buffer in slots + */ +static u32 mei_me_hbuf_depth(const struct mei_device *dev) +{ + struct mei_me_hw *hw = to_me_hw(dev); + + return hw->hbuf_depth; +} + +/** + * mei_me_hbuf_write - writes a message to host hw buffer. + * + * @dev: the device structure + * @hdr: header of message + * @hdr_len: header length in bytes: must be multiplication of a slot (4bytes) + * @data: payload + * @data_len: payload length in bytes + * + * Return: 0 if success, < 0 - otherwise. + */ +static int mei_me_hbuf_write(struct mei_device *dev, + const void *hdr, size_t hdr_len, + const void *data, size_t data_len) +{ + unsigned long rem; + unsigned long i; + const u32 *reg_buf; + u32 dw_cnt; + int empty_slots; + + if (WARN_ON(!hdr || hdr_len & 0x3)) + return -EINVAL; + + if (!data && data_len) { + dev_err(dev->dev, "wrong parameters null data with data_len = %zu\n", data_len); + return -EINVAL; + } + + dev_dbg(dev->dev, MEI_HDR_FMT, MEI_HDR_PRM((struct mei_msg_hdr *)hdr)); + + empty_slots = mei_hbuf_empty_slots(dev); + dev_dbg(dev->dev, "empty slots = %d.\n", empty_slots); + + if (empty_slots < 0) + return -EOVERFLOW; + + dw_cnt = mei_data2slots(hdr_len + data_len); + if (dw_cnt > (u32)empty_slots) + return -EMSGSIZE; + + reg_buf = hdr; + for (i = 0; i < hdr_len / MEI_SLOT_SIZE; i++) + mei_me_hcbww_write(dev, reg_buf[i]); + + reg_buf = data; + for (i = 0; i < data_len / MEI_SLOT_SIZE; i++) + mei_me_hcbww_write(dev, reg_buf[i]); + + rem = data_len & 0x3; + if (rem > 0) { + u32 reg = 0; + + memcpy(®, (const u8 *)data + data_len - rem, rem); + mei_me_hcbww_write(dev, reg); + } + + mei_hcsr_set_hig(dev); + if (!mei_me_hw_is_ready(dev)) + return -EIO; + + return 0; +} + +/** + * mei_me_count_full_read_slots - counts read full slots. + * + * @dev: the device structure + * + * Return: -EOVERFLOW if overflow, otherwise filled slots count + */ +static int mei_me_count_full_read_slots(struct mei_device *dev) +{ + u32 me_csr; + char read_ptr, write_ptr; + unsigned char buffer_depth, filled_slots; + + me_csr = mei_me_mecsr_read(dev); + buffer_depth = (unsigned char)((me_csr & ME_CBD_HRA) >> 24); + read_ptr = (char) ((me_csr & ME_CBRP_HRA) >> 8); + write_ptr = (char) ((me_csr & ME_CBWP_HRA) >> 16); + filled_slots = (unsigned char) (write_ptr - read_ptr); + + /* check for overflow */ + if (filled_slots > buffer_depth) + return -EOVERFLOW; + + dev_dbg(dev->dev, "filled_slots =%08x\n", filled_slots); + return (int)filled_slots; +} + +/** + * mei_me_read_slots - reads a message from mei device. + * + * @dev: the device structure + * @buffer: message buffer will be written + * @buffer_length: message size will be read + * + * Return: always 0 + */ +static int mei_me_read_slots(struct mei_device *dev, unsigned char *buffer, + unsigned long buffer_length) +{ + u32 *reg_buf = (u32 *)buffer; + + for (; buffer_length >= MEI_SLOT_SIZE; buffer_length -= MEI_SLOT_SIZE) + *reg_buf++ = mei_me_mecbrw_read(dev); + + if (buffer_length > 0) { + u32 reg = mei_me_mecbrw_read(dev); + + memcpy(reg_buf, ®, buffer_length); + } + + mei_hcsr_set_hig(dev); + return 0; +} + +/** + * mei_me_pg_set - write pg enter register + * + * @dev: the device structure + */ +static void mei_me_pg_set(struct mei_device *dev) +{ + struct mei_me_hw *hw = to_me_hw(dev); + u32 reg; + + reg = mei_me_reg_read(hw, H_HPG_CSR); + trace_mei_reg_read(dev->dev, "H_HPG_CSR", H_HPG_CSR, reg); + + reg |= H_HPG_CSR_PGI; + + trace_mei_reg_write(dev->dev, "H_HPG_CSR", H_HPG_CSR, reg); + mei_me_reg_write(hw, H_HPG_CSR, reg); +} + +/** + * mei_me_pg_unset - write pg exit register + * + * @dev: the device structure + */ +static void mei_me_pg_unset(struct mei_device *dev) +{ + struct mei_me_hw *hw = to_me_hw(dev); + u32 reg; + + reg = mei_me_reg_read(hw, H_HPG_CSR); + trace_mei_reg_read(dev->dev, "H_HPG_CSR", H_HPG_CSR, reg); + + WARN(!(reg & H_HPG_CSR_PGI), "PGI is not set\n"); + + reg |= H_HPG_CSR_PGIHEXR; + + trace_mei_reg_write(dev->dev, "H_HPG_CSR", H_HPG_CSR, reg); + mei_me_reg_write(hw, H_HPG_CSR, reg); +} + +/** + * mei_me_pg_legacy_enter_sync - perform legacy pg entry procedure + * + * @dev: the device structure + * + * Return: 0 on success an error code otherwise + */ +static int mei_me_pg_legacy_enter_sync(struct mei_device *dev) +{ + struct mei_me_hw *hw = to_me_hw(dev); + int ret; + + dev->pg_event = MEI_PG_EVENT_WAIT; + + ret = mei_hbm_pg(dev, MEI_PG_ISOLATION_ENTRY_REQ_CMD); + if (ret) + return ret; + + mutex_unlock(&dev->device_lock); + wait_event_timeout(dev->wait_pg, + dev->pg_event == MEI_PG_EVENT_RECEIVED, + dev->timeouts.pgi); + mutex_lock(&dev->device_lock); + + if (dev->pg_event == MEI_PG_EVENT_RECEIVED) { + mei_me_pg_set(dev); + ret = 0; + } else { + ret = -ETIME; + } + + dev->pg_event = MEI_PG_EVENT_IDLE; + hw->pg_state = MEI_PG_ON; + + return ret; +} + +/** + * mei_me_pg_legacy_exit_sync - perform legacy pg exit procedure + * + * @dev: the device structure + * + * Return: 0 on success an error code otherwise + */ +static int mei_me_pg_legacy_exit_sync(struct mei_device *dev) +{ + struct mei_me_hw *hw = to_me_hw(dev); + int ret; + + if (dev->pg_event == MEI_PG_EVENT_RECEIVED) + goto reply; + + dev->pg_event = MEI_PG_EVENT_WAIT; + + mei_me_pg_unset(dev); + + mutex_unlock(&dev->device_lock); + wait_event_timeout(dev->wait_pg, + dev->pg_event == MEI_PG_EVENT_RECEIVED, + dev->timeouts.pgi); + mutex_lock(&dev->device_lock); + +reply: + if (dev->pg_event != MEI_PG_EVENT_RECEIVED) { + ret = -ETIME; + goto out; + } + + dev->pg_event = MEI_PG_EVENT_INTR_WAIT; + ret = mei_hbm_pg(dev, MEI_PG_ISOLATION_EXIT_RES_CMD); + if (ret) + return ret; + + mutex_unlock(&dev->device_lock); + wait_event_timeout(dev->wait_pg, + dev->pg_event == MEI_PG_EVENT_INTR_RECEIVED, + dev->timeouts.pgi); + mutex_lock(&dev->device_lock); + + if (dev->pg_event == MEI_PG_EVENT_INTR_RECEIVED) + ret = 0; + else + ret = -ETIME; + +out: + dev->pg_event = MEI_PG_EVENT_IDLE; + hw->pg_state = MEI_PG_OFF; + + return ret; +} + +/** + * mei_me_pg_in_transition - is device now in pg transition + * + * @dev: the device structure + * + * Return: true if in pg transition, false otherwise + */ +static bool mei_me_pg_in_transition(struct mei_device *dev) +{ + return dev->pg_event >= MEI_PG_EVENT_WAIT && + dev->pg_event <= MEI_PG_EVENT_INTR_WAIT; +} + +/** + * mei_me_pg_is_enabled - detect if PG is supported by HW + * + * @dev: the device structure + * + * Return: true is pg supported, false otherwise + */ +static bool mei_me_pg_is_enabled(struct mei_device *dev) +{ + struct mei_me_hw *hw = to_me_hw(dev); + u32 reg = mei_me_mecsr_read(dev); + + if (hw->d0i3_supported) + return true; + + if ((reg & ME_PGIC_HRA) == 0) + goto notsupported; + + if (!dev->hbm_f_pg_supported) + goto notsupported; + + return true; + +notsupported: + dev_dbg(dev->dev, "pg: not supported: d0i3 = %d HGP = %d hbm version %d.%d ?= %d.%d\n", + hw->d0i3_supported, + !!(reg & ME_PGIC_HRA), + dev->version.major_version, + dev->version.minor_version, + HBM_MAJOR_VERSION_PGI, + HBM_MINOR_VERSION_PGI); + + return false; +} + +/** + * mei_me_d0i3_set - write d0i3 register bit on mei device. + * + * @dev: the device structure + * @intr: ask for interrupt + * + * Return: D0I3C register value + */ +static u32 mei_me_d0i3_set(struct mei_device *dev, bool intr) +{ + u32 reg = mei_me_d0i3c_read(dev); + + reg |= H_D0I3C_I3; + if (intr) + reg |= H_D0I3C_IR; + else + reg &= ~H_D0I3C_IR; + mei_me_d0i3c_write(dev, reg); + /* read it to ensure HW consistency */ + reg = mei_me_d0i3c_read(dev); + return reg; +} + +/** + * mei_me_d0i3_unset - clean d0i3 register bit on mei device. + * + * @dev: the device structure + * + * Return: D0I3C register value + */ +static u32 mei_me_d0i3_unset(struct mei_device *dev) +{ + u32 reg = mei_me_d0i3c_read(dev); + + reg &= ~H_D0I3C_I3; + reg |= H_D0I3C_IR; + mei_me_d0i3c_write(dev, reg); + /* read it to ensure HW consistency */ + reg = mei_me_d0i3c_read(dev); + return reg; +} + +/** + * mei_me_d0i3_enter_sync - perform d0i3 entry procedure + * + * @dev: the device structure + * + * Return: 0 on success an error code otherwise + */ +static int mei_me_d0i3_enter_sync(struct mei_device *dev) +{ + struct mei_me_hw *hw = to_me_hw(dev); + int ret; + u32 reg; + + reg = mei_me_d0i3c_read(dev); + if (reg & H_D0I3C_I3) { + /* we are in d0i3, nothing to do */ + dev_dbg(dev->dev, "d0i3 set not needed\n"); + ret = 0; + goto on; + } + + /* PGI entry procedure */ + dev->pg_event = MEI_PG_EVENT_WAIT; + + ret = mei_hbm_pg(dev, MEI_PG_ISOLATION_ENTRY_REQ_CMD); + if (ret) + /* FIXME: should we reset here? */ + goto out; + + mutex_unlock(&dev->device_lock); + wait_event_timeout(dev->wait_pg, + dev->pg_event == MEI_PG_EVENT_RECEIVED, + dev->timeouts.pgi); + mutex_lock(&dev->device_lock); + + if (dev->pg_event != MEI_PG_EVENT_RECEIVED) { + ret = -ETIME; + goto out; + } + /* end PGI entry procedure */ + + dev->pg_event = MEI_PG_EVENT_INTR_WAIT; + + reg = mei_me_d0i3_set(dev, true); + if (!(reg & H_D0I3C_CIP)) { + dev_dbg(dev->dev, "d0i3 enter wait not needed\n"); + ret = 0; + goto on; + } + + mutex_unlock(&dev->device_lock); + wait_event_timeout(dev->wait_pg, + dev->pg_event == MEI_PG_EVENT_INTR_RECEIVED, + dev->timeouts.d0i3); + mutex_lock(&dev->device_lock); + + if (dev->pg_event != MEI_PG_EVENT_INTR_RECEIVED) { + reg = mei_me_d0i3c_read(dev); + if (!(reg & H_D0I3C_I3)) { + ret = -ETIME; + goto out; + } + } + + ret = 0; +on: + hw->pg_state = MEI_PG_ON; +out: + dev->pg_event = MEI_PG_EVENT_IDLE; + dev_dbg(dev->dev, "d0i3 enter ret = %d\n", ret); + return ret; +} + +/** + * mei_me_d0i3_enter - perform d0i3 entry procedure + * no hbm PG handshake + * no waiting for confirmation; runs with interrupts + * disabled + * + * @dev: the device structure + * + * Return: 0 on success an error code otherwise + */ +static int mei_me_d0i3_enter(struct mei_device *dev) +{ + struct mei_me_hw *hw = to_me_hw(dev); + u32 reg; + + reg = mei_me_d0i3c_read(dev); + if (reg & H_D0I3C_I3) { + /* we are in d0i3, nothing to do */ + dev_dbg(dev->dev, "already d0i3 : set not needed\n"); + goto on; + } + + mei_me_d0i3_set(dev, false); +on: + hw->pg_state = MEI_PG_ON; + dev->pg_event = MEI_PG_EVENT_IDLE; + dev_dbg(dev->dev, "d0i3 enter\n"); + return 0; +} + +/** + * mei_me_d0i3_exit_sync - perform d0i3 exit procedure + * + * @dev: the device structure + * + * Return: 0 on success an error code otherwise + */ +static int mei_me_d0i3_exit_sync(struct mei_device *dev) +{ + struct mei_me_hw *hw = to_me_hw(dev); + int ret; + u32 reg; + + dev->pg_event = MEI_PG_EVENT_INTR_WAIT; + + reg = mei_me_d0i3c_read(dev); + if (!(reg & H_D0I3C_I3)) { + /* we are not in d0i3, nothing to do */ + dev_dbg(dev->dev, "d0i3 exit not needed\n"); + ret = 0; + goto off; + } + + reg = mei_me_d0i3_unset(dev); + if (!(reg & H_D0I3C_CIP)) { + dev_dbg(dev->dev, "d0i3 exit wait not needed\n"); + ret = 0; + goto off; + } + + mutex_unlock(&dev->device_lock); + wait_event_timeout(dev->wait_pg, + dev->pg_event == MEI_PG_EVENT_INTR_RECEIVED, + dev->timeouts.d0i3); + mutex_lock(&dev->device_lock); + + if (dev->pg_event != MEI_PG_EVENT_INTR_RECEIVED) { + reg = mei_me_d0i3c_read(dev); + if (reg & H_D0I3C_I3) { + ret = -ETIME; + goto out; + } + } + + ret = 0; +off: + hw->pg_state = MEI_PG_OFF; +out: + dev->pg_event = MEI_PG_EVENT_IDLE; + + dev_dbg(dev->dev, "d0i3 exit ret = %d\n", ret); + return ret; +} + +/** + * mei_me_pg_legacy_intr - perform legacy pg processing + * in interrupt thread handler + * + * @dev: the device structure + */ +static void mei_me_pg_legacy_intr(struct mei_device *dev) +{ + struct mei_me_hw *hw = to_me_hw(dev); + + if (dev->pg_event != MEI_PG_EVENT_INTR_WAIT) + return; + + dev->pg_event = MEI_PG_EVENT_INTR_RECEIVED; + hw->pg_state = MEI_PG_OFF; + if (waitqueue_active(&dev->wait_pg)) + wake_up(&dev->wait_pg); +} + +/** + * mei_me_d0i3_intr - perform d0i3 processing in interrupt thread handler + * + * @dev: the device structure + * @intr_source: interrupt source + */ +static void mei_me_d0i3_intr(struct mei_device *dev, u32 intr_source) +{ + struct mei_me_hw *hw = to_me_hw(dev); + + if (dev->pg_event == MEI_PG_EVENT_INTR_WAIT && + (intr_source & H_D0I3C_IS)) { + dev->pg_event = MEI_PG_EVENT_INTR_RECEIVED; + if (hw->pg_state == MEI_PG_ON) { + hw->pg_state = MEI_PG_OFF; + if (dev->hbm_state != MEI_HBM_IDLE) { + /* + * force H_RDY because it could be + * wiped off during PG + */ + dev_dbg(dev->dev, "d0i3 set host ready\n"); + mei_me_host_set_ready(dev); + } + } else { + hw->pg_state = MEI_PG_ON; + } + + wake_up(&dev->wait_pg); + } + + if (hw->pg_state == MEI_PG_ON && (intr_source & H_IS)) { + /* + * HW sent some data and we are in D0i3, so + * we got here because of HW initiated exit from D0i3. + * Start runtime pm resume sequence to exit low power state. + */ + dev_dbg(dev->dev, "d0i3 want resume\n"); + mei_hbm_pg_resume(dev); + } +} + +/** + * mei_me_pg_intr - perform pg processing in interrupt thread handler + * + * @dev: the device structure + * @intr_source: interrupt source + */ +static void mei_me_pg_intr(struct mei_device *dev, u32 intr_source) +{ + struct mei_me_hw *hw = to_me_hw(dev); + + if (hw->d0i3_supported) + mei_me_d0i3_intr(dev, intr_source); + else + mei_me_pg_legacy_intr(dev); +} + +/** + * mei_me_pg_enter_sync - perform runtime pm entry procedure + * + * @dev: the device structure + * + * Return: 0 on success an error code otherwise + */ +int mei_me_pg_enter_sync(struct mei_device *dev) +{ + struct mei_me_hw *hw = to_me_hw(dev); + + if (hw->d0i3_supported) + return mei_me_d0i3_enter_sync(dev); + else + return mei_me_pg_legacy_enter_sync(dev); +} + +/** + * mei_me_pg_exit_sync - perform runtime pm exit procedure + * + * @dev: the device structure + * + * Return: 0 on success an error code otherwise + */ +int mei_me_pg_exit_sync(struct mei_device *dev) +{ + struct mei_me_hw *hw = to_me_hw(dev); + + if (hw->d0i3_supported) + return mei_me_d0i3_exit_sync(dev); + else + return mei_me_pg_legacy_exit_sync(dev); +} + +/** + * mei_me_hw_reset - resets fw via mei csr register. + * + * @dev: the device structure + * @intr_enable: if interrupt should be enabled after reset. + * + * Return: 0 on success an error code otherwise + */ +static int mei_me_hw_reset(struct mei_device *dev, bool intr_enable) +{ + struct mei_me_hw *hw = to_me_hw(dev); + int ret; + u32 hcsr; + + if (intr_enable) { + mei_me_intr_enable(dev); + if (hw->d0i3_supported) { + ret = mei_me_d0i3_exit_sync(dev); + if (ret) + return ret; + } else { + hw->pg_state = MEI_PG_OFF; + } + } + + pm_runtime_set_active(dev->dev); + + hcsr = mei_hcsr_read(dev); + /* H_RST may be found lit before reset is started, + * for example if preceding reset flow hasn't completed. + * In that case asserting H_RST will be ignored, therefore + * we need to clean H_RST bit to start a successful reset sequence. + */ + if ((hcsr & H_RST) == H_RST) { + dev_warn(dev->dev, "H_RST is set = 0x%08X", hcsr); + hcsr &= ~H_RST; + mei_hcsr_set(dev, hcsr); + hcsr = mei_hcsr_read(dev); + } + + hcsr |= H_RST | H_IG | H_CSR_IS_MASK; + + if (!intr_enable || mei_me_hw_use_polling(to_me_hw(dev))) + hcsr &= ~H_CSR_IE_MASK; + + dev->recvd_hw_ready = false; + mei_hcsr_write(dev, hcsr); + + /* + * Host reads the H_CSR once to ensure that the + * posted write to H_CSR completes. + */ + hcsr = mei_hcsr_read(dev); + + if ((hcsr & H_RST) == 0) + dev_warn(dev->dev, "H_RST is not set = 0x%08X", hcsr); + + if ((hcsr & H_RDY) == H_RDY) + dev_warn(dev->dev, "H_RDY is not cleared 0x%08X", hcsr); + + if (!intr_enable) { + mei_me_hw_reset_release(dev); + if (hw->d0i3_supported) { + ret = mei_me_d0i3_enter(dev); + if (ret) + return ret; + } + } + return 0; +} + +/** + * mei_me_irq_quick_handler - The ISR of the MEI device + * + * @irq: The irq number + * @dev_id: pointer to the device structure + * + * Return: irqreturn_t + */ +irqreturn_t mei_me_irq_quick_handler(int irq, void *dev_id) +{ + struct mei_device *dev = (struct mei_device *)dev_id; + u32 hcsr; + + hcsr = mei_hcsr_read(dev); + if (!me_intr_src(hcsr)) + return IRQ_NONE; + + dev_dbg(dev->dev, "interrupt source 0x%08X\n", me_intr_src(hcsr)); + + /* disable interrupts on device */ + me_intr_disable(dev, hcsr); + return IRQ_WAKE_THREAD; +} +EXPORT_SYMBOL_GPL(mei_me_irq_quick_handler); + +/** + * mei_me_irq_thread_handler - function called after ISR to handle the interrupt + * processing. + * + * @irq: The irq number + * @dev_id: pointer to the device structure + * + * Return: irqreturn_t + * + */ +irqreturn_t mei_me_irq_thread_handler(int irq, void *dev_id) +{ + struct mei_device *dev = (struct mei_device *) dev_id; + struct list_head cmpl_list; + s32 slots; + u32 hcsr; + int rets = 0; + + dev_dbg(dev->dev, "function called after ISR to handle the interrupt processing.\n"); + /* initialize our complete list */ + mutex_lock(&dev->device_lock); + + hcsr = mei_hcsr_read(dev); + me_intr_clear(dev, hcsr); + + INIT_LIST_HEAD(&cmpl_list); + + /* check if ME wants a reset */ + if (!mei_hw_is_ready(dev) && dev->dev_state != MEI_DEV_RESETTING) { + dev_warn(dev->dev, "FW not ready: resetting: dev_state = %d pxp = %d\n", + dev->dev_state, dev->pxp_mode); + if (dev->dev_state == MEI_DEV_POWERING_DOWN || + dev->dev_state == MEI_DEV_POWER_DOWN) + mei_cl_all_disconnect(dev); + else if (dev->dev_state != MEI_DEV_DISABLED) + schedule_work(&dev->reset_work); + goto end; + } + + if (mei_me_hw_is_resetting(dev)) + mei_hcsr_set_hig(dev); + + mei_me_pg_intr(dev, me_intr_src(hcsr)); + + /* check if we need to start the dev */ + if (!mei_host_is_ready(dev)) { + if (mei_hw_is_ready(dev)) { + dev_dbg(dev->dev, "we need to start the dev.\n"); + dev->recvd_hw_ready = true; + wake_up(&dev->wait_hw_ready); + } else { + dev_dbg(dev->dev, "Spurious Interrupt\n"); + } + goto end; + } + /* check slots available for reading */ + slots = mei_count_full_read_slots(dev); + while (slots > 0) { + dev_dbg(dev->dev, "slots to read = %08x\n", slots); + rets = mei_irq_read_handler(dev, &cmpl_list, &slots); + /* There is a race between ME write and interrupt delivery: + * Not all data is always available immediately after the + * interrupt, so try to read again on the next interrupt. + */ + if (rets == -ENODATA) + break; + + if (rets) { + dev_err(dev->dev, "mei_irq_read_handler ret = %d, state = %d.\n", + rets, dev->dev_state); + if (dev->dev_state != MEI_DEV_RESETTING && + dev->dev_state != MEI_DEV_DISABLED && + dev->dev_state != MEI_DEV_POWERING_DOWN && + dev->dev_state != MEI_DEV_POWER_DOWN) + schedule_work(&dev->reset_work); + goto end; + } + } + + dev->hbuf_is_ready = mei_hbuf_is_ready(dev); + + /* + * During PG handshake only allowed write is the replay to the + * PG exit message, so block calling write function + * if the pg event is in PG handshake + */ + if (dev->pg_event != MEI_PG_EVENT_WAIT && + dev->pg_event != MEI_PG_EVENT_RECEIVED) { + rets = mei_irq_write_handler(dev, &cmpl_list); + dev->hbuf_is_ready = mei_hbuf_is_ready(dev); + } + + mei_irq_compl_handler(dev, &cmpl_list); + +end: + dev_dbg(dev->dev, "interrupt thread end ret = %d\n", rets); + mei_me_intr_enable(dev); + mutex_unlock(&dev->device_lock); + return IRQ_HANDLED; +} +EXPORT_SYMBOL_GPL(mei_me_irq_thread_handler); + +#define MEI_POLLING_TIMEOUT_ACTIVE 100 +#define MEI_POLLING_TIMEOUT_IDLE 500 + +/** + * mei_me_polling_thread - interrupt register polling thread + * + * The thread monitors the interrupt source register and calls + * mei_me_irq_thread_handler() to handle the firmware + * input. + * + * The function polls in MEI_POLLING_TIMEOUT_ACTIVE timeout + * in case there was an event, in idle case the polling + * time increases yet again by MEI_POLLING_TIMEOUT_ACTIVE + * up to MEI_POLLING_TIMEOUT_IDLE. + * + * @_dev: mei device + * + * Return: always 0 + */ +int mei_me_polling_thread(void *_dev) +{ + struct mei_device *dev = _dev; + irqreturn_t irq_ret; + long polling_timeout = MEI_POLLING_TIMEOUT_ACTIVE; + + dev_dbg(dev->dev, "kernel thread is running\n"); + while (!kthread_should_stop()) { + struct mei_me_hw *hw = to_me_hw(dev); + u32 hcsr; + + wait_event_timeout(hw->wait_active, + hw->is_active || kthread_should_stop(), + msecs_to_jiffies(MEI_POLLING_TIMEOUT_IDLE)); + + if (kthread_should_stop()) + break; + + hcsr = mei_hcsr_read(dev); + if (me_intr_src(hcsr)) { + polling_timeout = MEI_POLLING_TIMEOUT_ACTIVE; + irq_ret = mei_me_irq_thread_handler(1, dev); + if (irq_ret != IRQ_HANDLED) + dev_err(dev->dev, "irq_ret %d\n", irq_ret); + } else { + /* + * Increase timeout by MEI_POLLING_TIMEOUT_ACTIVE + * up to MEI_POLLING_TIMEOUT_IDLE + */ + polling_timeout = clamp_val(polling_timeout + MEI_POLLING_TIMEOUT_ACTIVE, + MEI_POLLING_TIMEOUT_ACTIVE, + MEI_POLLING_TIMEOUT_IDLE); + } + + schedule_timeout_interruptible(msecs_to_jiffies(polling_timeout)); + } + + return 0; +} +EXPORT_SYMBOL_GPL(mei_me_polling_thread); + +static const struct mei_hw_ops mei_me_hw_ops = { + + .trc_status = mei_me_trc_status, + .fw_status = mei_me_fw_status, + .pg_state = mei_me_pg_state, + + .host_is_ready = mei_me_host_is_ready, + + .hw_is_ready = mei_me_hw_is_ready, + .hw_reset = mei_me_hw_reset, + .hw_config = mei_me_hw_config, + .hw_start = mei_me_hw_start, + + .pg_in_transition = mei_me_pg_in_transition, + .pg_is_enabled = mei_me_pg_is_enabled, + + .intr_clear = mei_me_intr_clear, + .intr_enable = mei_me_intr_enable, + .intr_disable = mei_me_intr_disable, + .synchronize_irq = mei_me_synchronize_irq, + + .hbuf_free_slots = mei_me_hbuf_empty_slots, + .hbuf_is_ready = mei_me_hbuf_is_empty, + .hbuf_depth = mei_me_hbuf_depth, + + .write = mei_me_hbuf_write, + + .rdbuf_full_slots = mei_me_count_full_read_slots, + .read_hdr = mei_me_mecbrw_read, + .read = mei_me_read_slots +}; + +/** + * mei_me_fw_type_nm() - check for nm sku + * + * Read ME FW Status register to check for the Node Manager (NM) Firmware. + * The NM FW is only signaled in PCI function 0. + * __Note__: Deprecated by PCH8 and newer. + * + * @pdev: pci device + * + * Return: true in case of NM firmware + */ +static bool mei_me_fw_type_nm(const struct pci_dev *pdev) +{ + u32 reg; + unsigned int devfn; + + devfn = PCI_DEVFN(PCI_SLOT(pdev->devfn), 0); + pci_bus_read_config_dword(pdev->bus, devfn, PCI_CFG_HFS_2, ®); + trace_mei_pci_cfg_read(&pdev->dev, "PCI_CFG_HFS_2", PCI_CFG_HFS_2, reg); + /* make sure that bit 9 (NM) is up and bit 10 (DM) is down */ + return (reg & 0x600) == 0x200; +} + +#define MEI_CFG_FW_NM \ + .quirk_probe = mei_me_fw_type_nm + +/** + * mei_me_fw_type_sps_4() - check for sps 4.0 sku + * + * Read ME FW Status register to check for SPS Firmware. + * The SPS FW is only signaled in the PCI function 0. + * __Note__: Deprecated by SPS 5.0 and newer. + * + * @pdev: pci device + * + * Return: true in case of SPS firmware + */ +static bool mei_me_fw_type_sps_4(const struct pci_dev *pdev) +{ + u32 reg; + unsigned int devfn; + + devfn = PCI_DEVFN(PCI_SLOT(pdev->devfn), 0); + pci_bus_read_config_dword(pdev->bus, devfn, PCI_CFG_HFS_1, ®); + trace_mei_pci_cfg_read(&pdev->dev, "PCI_CFG_HFS_1", PCI_CFG_HFS_1, reg); + return (reg & PCI_CFG_HFS_1_OPMODE_MSK) == PCI_CFG_HFS_1_OPMODE_SPS; +} + +#define MEI_CFG_FW_SPS_4 \ + .quirk_probe = mei_me_fw_type_sps_4 + +/** + * mei_me_fw_type_sps_ign() - check for sps or ign sku + * + * Read ME FW Status register to check for SPS or IGN Firmware. + * The SPS/IGN FW is only signaled in pci function 0 + * + * @pdev: pci device + * + * Return: true in case of SPS/IGN firmware + */ +static bool mei_me_fw_type_sps_ign(const struct pci_dev *pdev) +{ + u32 reg; + u32 fw_type; + unsigned int devfn; + + devfn = PCI_DEVFN(PCI_SLOT(pdev->devfn), 0); + pci_bus_read_config_dword(pdev->bus, devfn, PCI_CFG_HFS_3, ®); + trace_mei_pci_cfg_read(&pdev->dev, "PCI_CFG_HFS_3", PCI_CFG_HFS_3, reg); + fw_type = (reg & PCI_CFG_HFS_3_FW_SKU_MSK); + + dev_dbg(&pdev->dev, "fw type is %d\n", fw_type); + + return fw_type == PCI_CFG_HFS_3_FW_SKU_IGN || + fw_type == PCI_CFG_HFS_3_FW_SKU_SPS; +} + +#define MEI_CFG_KIND_ITOUCH \ + .kind = "itouch" + +#define MEI_CFG_TYPE_GSC \ + .kind = "gsc" + +#define MEI_CFG_TYPE_GSCFI \ + .kind = "gscfi" + +#define MEI_CFG_FW_SPS_IGN \ + .quirk_probe = mei_me_fw_type_sps_ign + +#define MEI_CFG_FW_VER_SUPP \ + .fw_ver_supported = 1 + +#define MEI_CFG_ICH_HFS \ + .fw_status.count = 0 + +#define MEI_CFG_ICH10_HFS \ + .fw_status.count = 1, \ + .fw_status.status[0] = PCI_CFG_HFS_1 + +#define MEI_CFG_PCH_HFS \ + .fw_status.count = 2, \ + .fw_status.status[0] = PCI_CFG_HFS_1, \ + .fw_status.status[1] = PCI_CFG_HFS_2 + +#define MEI_CFG_PCH8_HFS \ + .fw_status.count = 6, \ + .fw_status.status[0] = PCI_CFG_HFS_1, \ + .fw_status.status[1] = PCI_CFG_HFS_2, \ + .fw_status.status[2] = PCI_CFG_HFS_3, \ + .fw_status.status[3] = PCI_CFG_HFS_4, \ + .fw_status.status[4] = PCI_CFG_HFS_5, \ + .fw_status.status[5] = PCI_CFG_HFS_6 + +#define MEI_CFG_DMA_128 \ + .dma_size[DMA_DSCR_HOST] = SZ_128K, \ + .dma_size[DMA_DSCR_DEVICE] = SZ_128K, \ + .dma_size[DMA_DSCR_CTRL] = PAGE_SIZE + +#define MEI_CFG_TRC \ + .hw_trc_supported = 1 + +/* ICH Legacy devices */ +static const struct mei_cfg mei_me_ich_cfg = { + MEI_CFG_ICH_HFS, +}; + +/* ICH devices */ +static const struct mei_cfg mei_me_ich10_cfg = { + MEI_CFG_ICH10_HFS, +}; + +/* PCH6 devices */ +static const struct mei_cfg mei_me_pch6_cfg = { + MEI_CFG_PCH_HFS, +}; + +/* PCH7 devices */ +static const struct mei_cfg mei_me_pch7_cfg = { + MEI_CFG_PCH_HFS, + MEI_CFG_FW_VER_SUPP, +}; + +/* PCH Cougar Point and Patsburg with quirk for Node Manager exclusion */ +static const struct mei_cfg mei_me_pch_cpt_pbg_cfg = { + MEI_CFG_PCH_HFS, + MEI_CFG_FW_VER_SUPP, + MEI_CFG_FW_NM, +}; + +/* PCH8 Lynx Point and newer devices */ +static const struct mei_cfg mei_me_pch8_cfg = { + MEI_CFG_PCH8_HFS, + MEI_CFG_FW_VER_SUPP, +}; + +/* PCH8 Lynx Point and newer devices - iTouch */ +static const struct mei_cfg mei_me_pch8_itouch_cfg = { + MEI_CFG_KIND_ITOUCH, + MEI_CFG_PCH8_HFS, + MEI_CFG_FW_VER_SUPP, +}; + +/* PCH8 Lynx Point with quirk for SPS Firmware exclusion */ +static const struct mei_cfg mei_me_pch8_sps_4_cfg = { + MEI_CFG_PCH8_HFS, + MEI_CFG_FW_VER_SUPP, + MEI_CFG_FW_SPS_4, +}; + +/* LBG with quirk for SPS (4.0) Firmware exclusion */ +static const struct mei_cfg mei_me_pch12_sps_4_cfg = { + MEI_CFG_PCH8_HFS, + MEI_CFG_FW_VER_SUPP, + MEI_CFG_FW_SPS_4, +}; + +/* Cannon Lake and newer devices */ +static const struct mei_cfg mei_me_pch12_cfg = { + MEI_CFG_PCH8_HFS, + MEI_CFG_FW_VER_SUPP, + MEI_CFG_DMA_128, +}; + +/* Cannon Lake with quirk for SPS 5.0 and newer Firmware exclusion */ +static const struct mei_cfg mei_me_pch12_sps_cfg = { + MEI_CFG_PCH8_HFS, + MEI_CFG_FW_VER_SUPP, + MEI_CFG_DMA_128, + MEI_CFG_FW_SPS_IGN, +}; + +/* Cannon Lake itouch with quirk for SPS 5.0 and newer Firmware exclusion + * w/o DMA support. + */ +static const struct mei_cfg mei_me_pch12_itouch_sps_cfg = { + MEI_CFG_KIND_ITOUCH, + MEI_CFG_PCH8_HFS, + MEI_CFG_FW_VER_SUPP, + MEI_CFG_FW_SPS_IGN, +}; + +/* Tiger Lake and newer devices */ +static const struct mei_cfg mei_me_pch15_cfg = { + MEI_CFG_PCH8_HFS, + MEI_CFG_FW_VER_SUPP, + MEI_CFG_DMA_128, + MEI_CFG_TRC, +}; + +/* Tiger Lake with quirk for SPS 5.0 and newer Firmware exclusion */ +static const struct mei_cfg mei_me_pch15_sps_cfg = { + MEI_CFG_PCH8_HFS, + MEI_CFG_FW_VER_SUPP, + MEI_CFG_DMA_128, + MEI_CFG_TRC, + MEI_CFG_FW_SPS_IGN, +}; + +/* Graphics System Controller */ +static const struct mei_cfg mei_me_gsc_cfg = { + MEI_CFG_TYPE_GSC, + MEI_CFG_PCH8_HFS, + MEI_CFG_FW_VER_SUPP, +}; + +/* Graphics System Controller Firmware Interface */ +static const struct mei_cfg mei_me_gscfi_cfg = { + MEI_CFG_TYPE_GSCFI, + MEI_CFG_PCH8_HFS, + MEI_CFG_FW_VER_SUPP, +}; + +/* + * mei_cfg_list - A list of platform platform specific configurations. + * Note: has to be synchronized with enum mei_cfg_idx. + */ +static const struct mei_cfg *const mei_cfg_list[] = { + [MEI_ME_UNDEF_CFG] = NULL, + [MEI_ME_ICH_CFG] = &mei_me_ich_cfg, + [MEI_ME_ICH10_CFG] = &mei_me_ich10_cfg, + [MEI_ME_PCH6_CFG] = &mei_me_pch6_cfg, + [MEI_ME_PCH7_CFG] = &mei_me_pch7_cfg, + [MEI_ME_PCH_CPT_PBG_CFG] = &mei_me_pch_cpt_pbg_cfg, + [MEI_ME_PCH8_CFG] = &mei_me_pch8_cfg, + [MEI_ME_PCH8_ITOUCH_CFG] = &mei_me_pch8_itouch_cfg, + [MEI_ME_PCH8_SPS_4_CFG] = &mei_me_pch8_sps_4_cfg, + [MEI_ME_PCH12_CFG] = &mei_me_pch12_cfg, + [MEI_ME_PCH12_SPS_4_CFG] = &mei_me_pch12_sps_4_cfg, + [MEI_ME_PCH12_SPS_CFG] = &mei_me_pch12_sps_cfg, + [MEI_ME_PCH12_SPS_ITOUCH_CFG] = &mei_me_pch12_itouch_sps_cfg, + [MEI_ME_PCH15_CFG] = &mei_me_pch15_cfg, + [MEI_ME_PCH15_SPS_CFG] = &mei_me_pch15_sps_cfg, + [MEI_ME_GSC_CFG] = &mei_me_gsc_cfg, + [MEI_ME_GSCFI_CFG] = &mei_me_gscfi_cfg, +}; + +const struct mei_cfg *mei_me_get_cfg(kernel_ulong_t idx) +{ + BUILD_BUG_ON(ARRAY_SIZE(mei_cfg_list) != MEI_ME_NUM_CFG); + + if (idx >= MEI_ME_NUM_CFG) + return NULL; + + return mei_cfg_list[idx]; +} +EXPORT_SYMBOL_GPL(mei_me_get_cfg); + +/** + * mei_me_dev_init - allocates and initializes the mei device structure + * + * @parent: device associated with physical device (pci/platform) + * @cfg: per device generation config + * @slow_fw: configure longer timeouts as FW is slow + * + * Return: The mei_device pointer on success, NULL on failure. + */ +struct mei_device *mei_me_dev_init(struct device *parent, + const struct mei_cfg *cfg, bool slow_fw) +{ + struct mei_device *dev; + struct mei_me_hw *hw; + int i; + + dev = devm_kzalloc(parent, sizeof(*dev) + sizeof(*hw), GFP_KERNEL); + if (!dev) + return NULL; + + hw = to_me_hw(dev); + + for (i = 0; i < DMA_DSCR_NUM; i++) + dev->dr_dscr[i].size = cfg->dma_size[i]; + + mei_device_init(dev, parent, slow_fw, &mei_me_hw_ops); + hw->cfg = cfg; + + dev->fw_f_fw_ver_supported = cfg->fw_ver_supported; + + dev->kind = cfg->kind; + + return dev; +} +EXPORT_SYMBOL_GPL(mei_me_dev_init); |