diff options
Diffstat (limited to 'drivers/misc/mei')
38 files changed, 17843 insertions, 0 deletions
diff --git a/drivers/misc/mei/Kconfig b/drivers/misc/mei/Kconfig new file mode 100644 index 0000000000..37db142de4 --- /dev/null +++ b/drivers/misc/mei/Kconfig @@ -0,0 +1,65 @@ +# SPDX-License-Identifier: GPL-2.0 +# Copyright (c) 2003-2019, Intel Corporation. All rights reserved. +config INTEL_MEI + tristate "Intel Management Engine Interface" + depends on X86 && PCI + help + The Intel Management Engine (Intel ME) provides Manageability, + Security and Media services for system containing Intel chipsets. + if selected /dev/mei misc device will be created. + + For more information see + <https://software.intel.com/en-us/manageability/> + +config INTEL_MEI_ME + tristate "ME Enabled Intel Chipsets" + select INTEL_MEI + depends on X86 && PCI + help + MEI support for ME Enabled Intel chipsets. + + Supported Chipsets are: + 7 Series Chipset Family + 6 Series Chipset Family + 5 Series Chipset Family + 4 Series Chipset Family + Mobile 4 Series Chipset Family + ICH9 + 82946GZ/GL + 82G35 Express + 82Q963/Q965 + 82P965/G965 + Mobile PM965/GM965 + Mobile GME965/GLE960 + 82Q35 Express + 82G33/G31/P35/P31 Express + 82Q33 Express + 82X38/X48 Express + +config INTEL_MEI_TXE + tristate "Intel Trusted Execution Environment with ME Interface" + select INTEL_MEI + depends on X86 && PCI + help + MEI Support for Trusted Execution Environment device on Intel SoCs + + Supported SoCs: + Intel Bay Trail + +config INTEL_MEI_GSC + tristate "Intel MEI GSC embedded device" + depends on INTEL_MEI + depends on INTEL_MEI_ME + depends on X86 && PCI + depends on DRM_I915 + help + Intel auxiliary driver for GSC devices embedded in Intel graphics devices. + + An MEI device here called GSC can be embedded in an + Intel graphics devices, to support a range of chassis + tasks such as graphics card firmware update and security + tasks. + +source "drivers/misc/mei/hdcp/Kconfig" +source "drivers/misc/mei/pxp/Kconfig" +source "drivers/misc/mei/gsc_proxy/Kconfig" diff --git a/drivers/misc/mei/Makefile b/drivers/misc/mei/Makefile new file mode 100644 index 0000000000..14aee253ae --- /dev/null +++ b/drivers/misc/mei/Makefile @@ -0,0 +1,33 @@ +# SPDX-License-Identifier: GPL-2.0 +# +# Copyright (c) 2010-2019, Intel Corporation. All rights reserved. +# Makefile - Intel Management Engine Interface (Intel MEI) Linux driver +# +obj-$(CONFIG_INTEL_MEI) += mei.o +mei-objs := init.o +mei-objs += hbm.o +mei-objs += interrupt.o +mei-objs += client.o +mei-objs += main.o +mei-objs += dma-ring.o +mei-objs += bus.o +mei-objs += bus-fixup.o +mei-$(CONFIG_DEBUG_FS) += debugfs.o + +obj-$(CONFIG_INTEL_MEI_ME) += mei-me.o +mei-me-objs := pci-me.o +mei-me-objs += hw-me.o + +obj-$(CONFIG_INTEL_MEI_GSC) += mei-gsc.o +mei-gsc-objs := gsc-me.o + +obj-$(CONFIG_INTEL_MEI_TXE) += mei-txe.o +mei-txe-objs := pci-txe.o +mei-txe-objs += hw-txe.o + +mei-$(CONFIG_EVENT_TRACING) += mei-trace.o +CFLAGS_mei-trace.o = -I$(src) + +obj-$(CONFIG_INTEL_MEI_HDCP) += hdcp/ +obj-$(CONFIG_INTEL_MEI_PXP) += pxp/ +obj-$(CONFIG_INTEL_MEI_GSC_PROXY) += gsc_proxy/ diff --git a/drivers/misc/mei/bus-fixup.c b/drivers/misc/mei/bus-fixup.c new file mode 100644 index 0000000000..2733070acf --- /dev/null +++ b/drivers/misc/mei/bus-fixup.c @@ -0,0 +1,588 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2013-2023, Intel Corporation. All rights reserved. + * Intel Management Engine Interface (Intel MEI) Linux driver + */ + +#include <linux/kernel.h> +#include <linux/sched.h> +#include <linux/module.h> +#include <linux/device.h> +#include <linux/slab.h> + +#include <linux/mei.h> +#include <linux/mei_cl_bus.h> + +#include "mei_dev.h" +#include "client.h" +#include "mkhi.h" + +#define MEI_UUID_NFC_INFO UUID_LE(0xd2de1625, 0x382d, 0x417d, \ + 0x48, 0xa4, 0xef, 0xab, 0xba, 0x8a, 0x12, 0x06) + +static const uuid_le mei_nfc_info_guid = MEI_UUID_NFC_INFO; + +#define MEI_UUID_NFC_HCI UUID_LE(0x0bb17a78, 0x2a8e, 0x4c50, \ + 0x94, 0xd4, 0x50, 0x26, 0x67, 0x23, 0x77, 0x5c) + +#define MEI_UUID_WD UUID_LE(0x05B79A6F, 0x4628, 0x4D7F, \ + 0x89, 0x9D, 0xA9, 0x15, 0x14, 0xCB, 0x32, 0xAB) + +#define MEI_UUID_MKHIF_FIX UUID_LE(0x55213584, 0x9a29, 0x4916, \ + 0xba, 0xdf, 0xf, 0xb7, 0xed, 0x68, 0x2a, 0xeb) + +#define MEI_UUID_IGSC_MKHI UUID_LE(0xE2C2AFA2, 0x3817, 0x4D19, \ + 0x9D, 0x95, 0x06, 0xB1, 0x6B, 0x58, 0x8A, 0x5D) + +#define MEI_UUID_IGSC_MKHI_FIX UUID_LE(0x46E0C1FB, 0xA546, 0x414F, \ + 0x91, 0x70, 0xB7, 0xF4, 0x6D, 0x57, 0xB4, 0xAD) + +#define MEI_UUID_HDCP UUID_LE(0xB638AB7E, 0x94E2, 0x4EA2, \ + 0xA5, 0x52, 0xD1, 0xC5, 0x4B, 0x62, 0x7F, 0x04) + +#define MEI_UUID_PAVP UUID_LE(0xfbf6fcf1, 0x96cf, 0x4e2e, 0xA6, \ + 0xa6, 0x1b, 0xab, 0x8c, 0xbe, 0x36, 0xb1) + +#define MEI_UUID_ANY NULL_UUID_LE + +/** + * number_of_connections - determine whether an client be on the bus + * according number of connections + * We support only clients: + * 1. with single connection + * 2. and fixed clients (max_number_of_connections == 0) + * + * @cldev: me clients device + */ +static void number_of_connections(struct mei_cl_device *cldev) +{ + if (cldev->me_cl->props.max_number_of_connections > 1) + cldev->do_match = 0; +} + +/** + * blacklist - blacklist a client from the bus + * + * @cldev: me clients device + */ +static void blacklist(struct mei_cl_device *cldev) +{ + cldev->do_match = 0; +} + +/** + * whitelist - forcefully whitelist client + * + * @cldev: me clients device + */ +static void whitelist(struct mei_cl_device *cldev) +{ + cldev->do_match = 1; +} + +#define OSTYPE_LINUX 2 +struct mei_os_ver { + __le16 build; + __le16 reserved1; + u8 os_type; + u8 major; + u8 minor; + u8 reserved2; +} __packed; + +struct mkhi_fw_ver_block { + u16 minor; + u8 major; + u8 platform; + u16 buildno; + u16 hotfix; +} __packed; + +struct mkhi_fw_ver { + struct mkhi_fw_ver_block ver[MEI_MAX_FW_VER_BLOCKS]; +} __packed; + +#define MKHI_OSVER_BUF_LEN (sizeof(struct mkhi_msg_hdr) + \ + sizeof(struct mkhi_fwcaps) + \ + sizeof(struct mei_os_ver)) +static int mei_osver(struct mei_cl_device *cldev) +{ + const size_t size = MKHI_OSVER_BUF_LEN; + u8 buf[MKHI_OSVER_BUF_LEN]; + struct mkhi_msg *req; + struct mkhi_fwcaps *fwcaps; + struct mei_os_ver *os_ver; + unsigned int mode = MEI_CL_IO_TX_BLOCKING | MEI_CL_IO_TX_INTERNAL; + + memset(buf, 0, size); + + req = (struct mkhi_msg *)buf; + req->hdr.group_id = MKHI_FWCAPS_GROUP_ID; + req->hdr.command = MKHI_FWCAPS_SET_OS_VER_APP_RULE_CMD; + + fwcaps = (struct mkhi_fwcaps *)req->data; + + fwcaps->id.rule_type = 0x0; + fwcaps->id.feature_id = MKHI_FEATURE_PTT; + fwcaps->len = sizeof(*os_ver); + os_ver = (struct mei_os_ver *)fwcaps->data; + os_ver->os_type = OSTYPE_LINUX; + + return __mei_cl_send(cldev->cl, buf, size, 0, mode); +} + +#define MKHI_FWVER_BUF_LEN (sizeof(struct mkhi_msg_hdr) + \ + sizeof(struct mkhi_fw_ver)) +#define MKHI_FWVER_LEN(__num) (sizeof(struct mkhi_msg_hdr) + \ + sizeof(struct mkhi_fw_ver_block) * (__num)) +static int mei_fwver(struct mei_cl_device *cldev) +{ + u8 buf[MKHI_FWVER_BUF_LEN]; + struct mkhi_msg req; + struct mkhi_msg *rsp; + struct mkhi_fw_ver *fwver; + int bytes_recv, ret, i; + + memset(buf, 0, sizeof(buf)); + + req.hdr.group_id = MKHI_GEN_GROUP_ID; + req.hdr.command = MKHI_GEN_GET_FW_VERSION_CMD; + + ret = __mei_cl_send(cldev->cl, (u8 *)&req, sizeof(req), 0, + MEI_CL_IO_TX_BLOCKING); + if (ret < 0) { + dev_info(&cldev->dev, "Could not send ReqFWVersion cmd ret = %d\n", ret); + return ret; + } + + ret = 0; + bytes_recv = __mei_cl_recv(cldev->cl, buf, sizeof(buf), NULL, 0, + cldev->bus->timeouts.mkhi_recv); + if (bytes_recv < 0 || (size_t)bytes_recv < MKHI_FWVER_LEN(1)) { + /* + * Should be at least one version block, + * error out if nothing found + */ + dev_info(&cldev->dev, "Could not read FW version ret = %d\n", bytes_recv); + return -EIO; + } + + rsp = (struct mkhi_msg *)buf; + fwver = (struct mkhi_fw_ver *)rsp->data; + memset(cldev->bus->fw_ver, 0, sizeof(cldev->bus->fw_ver)); + for (i = 0; i < MEI_MAX_FW_VER_BLOCKS; i++) { + if ((size_t)bytes_recv < MKHI_FWVER_LEN(i + 1)) + break; + dev_dbg(&cldev->dev, "FW version%d %d:%d.%d.%d.%d\n", + i, fwver->ver[i].platform, + fwver->ver[i].major, fwver->ver[i].minor, + fwver->ver[i].hotfix, fwver->ver[i].buildno); + + cldev->bus->fw_ver[i].platform = fwver->ver[i].platform; + cldev->bus->fw_ver[i].major = fwver->ver[i].major; + cldev->bus->fw_ver[i].minor = fwver->ver[i].minor; + cldev->bus->fw_ver[i].hotfix = fwver->ver[i].hotfix; + cldev->bus->fw_ver[i].buildno = fwver->ver[i].buildno; + } + cldev->bus->fw_ver_received = 1; + + return ret; +} + +#define GFX_MEMORY_READY_TIMEOUT 200 /* timeout in milliseconds */ + +static int mei_gfx_memory_ready(struct mei_cl_device *cldev) +{ + struct mkhi_gfx_mem_ready req = {0}; + unsigned int mode = MEI_CL_IO_TX_INTERNAL | MEI_CL_IO_TX_BLOCKING; + + req.hdr.group_id = MKHI_GROUP_ID_GFX; + req.hdr.command = MKHI_GFX_MEMORY_READY_CMD_REQ; + req.flags = MKHI_GFX_MEM_READY_PXP_ALLOWED; + + dev_dbg(&cldev->dev, "Sending memory ready command\n"); + return __mei_cl_send_timeout(cldev->cl, (u8 *)&req, sizeof(req), 0, + mode, GFX_MEMORY_READY_TIMEOUT); +} + +static void mei_mkhi_fix(struct mei_cl_device *cldev) +{ + int ret; + + /* No need to enable the client if nothing is needed from it */ + if (!cldev->bus->fw_f_fw_ver_supported && + !cldev->bus->hbm_f_os_supported) + return; + + ret = mei_cldev_enable(cldev); + if (ret) + return; + + if (cldev->bus->fw_f_fw_ver_supported) { + ret = mei_fwver(cldev); + if (ret < 0) + dev_info(&cldev->dev, "FW version command failed %d\n", + ret); + } + + if (cldev->bus->hbm_f_os_supported) { + ret = mei_osver(cldev); + if (ret < 0) + dev_info(&cldev->dev, "OS version command failed %d\n", + ret); + } + mei_cldev_disable(cldev); +} + +static void mei_gsc_mkhi_ver(struct mei_cl_device *cldev) +{ + int ret; + + /* + * No need to enable the client if nothing is needed from it. + * No need to fill in version if it is already filled in by the fix address client. + */ + if (!cldev->bus->fw_f_fw_ver_supported || cldev->bus->fw_ver_received) + return; + + ret = mei_cldev_enable(cldev); + if (ret) + return; + + ret = mei_fwver(cldev); + if (ret < 0) + dev_info(&cldev->dev, "FW version command failed %d\n", ret); + mei_cldev_disable(cldev); +} + +static void mei_gsc_mkhi_fix_ver(struct mei_cl_device *cldev) +{ + int ret; + + /* No need to enable the client if nothing is needed from it */ + if (!cldev->bus->fw_f_fw_ver_supported && + cldev->bus->pxp_mode != MEI_DEV_PXP_INIT) + return; + + ret = mei_cldev_enable(cldev); + if (ret) + return; + + if (cldev->bus->pxp_mode == MEI_DEV_PXP_INIT) { + ret = mei_gfx_memory_ready(cldev); + if (ret < 0) { + dev_err(&cldev->dev, "memory ready command failed %d\n", ret); + } else { + dev_dbg(&cldev->dev, "memory ready command sent\n"); + cldev->bus->pxp_mode = MEI_DEV_PXP_SETUP; + } + /* we go to reset after that */ + goto out; + } + + ret = mei_fwver(cldev); + if (ret < 0) + dev_info(&cldev->dev, "FW version command failed %d\n", + ret); +out: + mei_cldev_disable(cldev); +} + +/** + * mei_wd - wd client on the bus, change protocol version + * as the API has changed. + * + * @cldev: me clients device + */ +#if IS_ENABLED(CONFIG_INTEL_MEI_ME) +#include <linux/pci.h> +#include "hw-me-regs.h" +static void mei_wd(struct mei_cl_device *cldev) +{ + struct pci_dev *pdev = to_pci_dev(cldev->dev.parent); + + if (pdev->device == MEI_DEV_ID_WPT_LP || + pdev->device == MEI_DEV_ID_SPT || + pdev->device == MEI_DEV_ID_SPT_H) + cldev->me_cl->props.protocol_version = 0x2; + + cldev->do_match = 1; +} +#else +static inline void mei_wd(struct mei_cl_device *cldev) {} +#endif /* CONFIG_INTEL_MEI_ME */ + +struct mei_nfc_cmd { + u8 command; + u8 status; + u16 req_id; + u32 reserved; + u16 data_size; + u8 sub_command; + u8 data[]; +} __packed; + +struct mei_nfc_reply { + u8 command; + u8 status; + u16 req_id; + u32 reserved; + u16 data_size; + u8 sub_command; + u8 reply_status; + u8 data[]; +} __packed; + +struct mei_nfc_if_version { + u8 radio_version_sw[3]; + u8 reserved[3]; + u8 radio_version_hw[3]; + u8 i2c_addr; + u8 fw_ivn; + u8 vendor_id; + u8 radio_type; +} __packed; + + +#define MEI_NFC_CMD_MAINTENANCE 0x00 +#define MEI_NFC_SUBCMD_IF_VERSION 0x01 + +/* Vendors */ +#define MEI_NFC_VENDOR_INSIDE 0x00 +#define MEI_NFC_VENDOR_NXP 0x01 + +/* Radio types */ +#define MEI_NFC_VENDOR_INSIDE_UREAD 0x00 +#define MEI_NFC_VENDOR_NXP_PN544 0x01 + +/** + * mei_nfc_if_version - get NFC interface version + * + * @cl: host client (nfc info) + * @ver: NFC interface version to be filled in + * + * Return: 0 on success; < 0 otherwise + */ +static int mei_nfc_if_version(struct mei_cl *cl, + struct mei_nfc_if_version *ver) +{ + struct mei_device *bus; + struct mei_nfc_cmd cmd = { + .command = MEI_NFC_CMD_MAINTENANCE, + .data_size = 1, + .sub_command = MEI_NFC_SUBCMD_IF_VERSION, + }; + struct mei_nfc_reply *reply = NULL; + size_t if_version_length; + u8 vtag; + int bytes_recv, ret; + + bus = cl->dev; + + WARN_ON(mutex_is_locked(&bus->device_lock)); + + ret = __mei_cl_send(cl, (u8 *)&cmd, sizeof(cmd), 0, + MEI_CL_IO_TX_BLOCKING); + if (ret < 0) { + dev_err(bus->dev, "Could not send IF version cmd ret = %d\n", ret); + return ret; + } + + /* to be sure on the stack we alloc memory */ + if_version_length = sizeof(*reply) + sizeof(*ver); + + reply = kzalloc(if_version_length, GFP_KERNEL); + if (!reply) + return -ENOMEM; + + ret = 0; + bytes_recv = __mei_cl_recv(cl, (u8 *)reply, if_version_length, &vtag, + 0, 0); + if (bytes_recv < 0 || (size_t)bytes_recv < if_version_length) { + dev_err(bus->dev, "Could not read IF version ret = %d\n", bytes_recv); + ret = -EIO; + goto err; + } + + memcpy(ver, reply->data, sizeof(*ver)); + + dev_info(bus->dev, "NFC MEI VERSION: IVN 0x%x Vendor ID 0x%x Type 0x%x\n", + ver->fw_ivn, ver->vendor_id, ver->radio_type); + +err: + kfree(reply); + return ret; +} + +/** + * mei_nfc_radio_name - derive nfc radio name from the interface version + * + * @ver: NFC radio version + * + * Return: radio name string + */ +static const char *mei_nfc_radio_name(struct mei_nfc_if_version *ver) +{ + + if (ver->vendor_id == MEI_NFC_VENDOR_INSIDE) { + if (ver->radio_type == MEI_NFC_VENDOR_INSIDE_UREAD) + return "microread"; + } + + if (ver->vendor_id == MEI_NFC_VENDOR_NXP) { + if (ver->radio_type == MEI_NFC_VENDOR_NXP_PN544) + return "pn544"; + } + + return NULL; +} + +/** + * mei_nfc - The nfc fixup function. The function retrieves nfc radio + * name and set is as device attribute so we can load + * the proper device driver for it + * + * @cldev: me client device (nfc) + */ +static void mei_nfc(struct mei_cl_device *cldev) +{ + struct mei_device *bus; + struct mei_cl *cl; + struct mei_me_client *me_cl = NULL; + struct mei_nfc_if_version ver; + const char *radio_name = NULL; + int ret; + + bus = cldev->bus; + + mutex_lock(&bus->device_lock); + /* we need to connect to INFO GUID */ + cl = mei_cl_alloc_linked(bus); + if (IS_ERR(cl)) { + ret = PTR_ERR(cl); + cl = NULL; + dev_err(bus->dev, "nfc hook alloc failed %d\n", ret); + goto out; + } + + me_cl = mei_me_cl_by_uuid(bus, &mei_nfc_info_guid); + if (!me_cl) { + ret = -ENOTTY; + dev_err(bus->dev, "Cannot find nfc info %d\n", ret); + goto out; + } + + ret = mei_cl_connect(cl, me_cl, NULL); + if (ret < 0) { + dev_err(&cldev->dev, "Can't connect to the NFC INFO ME ret = %d\n", + ret); + goto out; + } + + mutex_unlock(&bus->device_lock); + + ret = mei_nfc_if_version(cl, &ver); + if (ret) + goto disconnect; + + radio_name = mei_nfc_radio_name(&ver); + + if (!radio_name) { + ret = -ENOENT; + dev_err(&cldev->dev, "Can't get the NFC interface version ret = %d\n", + ret); + goto disconnect; + } + + dev_dbg(bus->dev, "nfc radio %s\n", radio_name); + strscpy(cldev->name, radio_name, sizeof(cldev->name)); + +disconnect: + mutex_lock(&bus->device_lock); + if (mei_cl_disconnect(cl) < 0) + dev_err(bus->dev, "Can't disconnect the NFC INFO ME\n"); + + mei_cl_flush_queues(cl, NULL); + +out: + mei_cl_unlink(cl); + mutex_unlock(&bus->device_lock); + mei_me_cl_put(me_cl); + kfree(cl); + + if (ret) + cldev->do_match = 0; + + dev_dbg(bus->dev, "end of fixup match = %d\n", cldev->do_match); +} + +/** + * vt_support - enable on bus clients with vtag support + * + * @cldev: me clients device + */ +static void vt_support(struct mei_cl_device *cldev) +{ + if (cldev->me_cl->props.vt_supported == 1) + cldev->do_match = 1; +} + +/** + * pxp_is_ready - enable bus client if pxp is ready + * + * @cldev: me clients device + */ +static void pxp_is_ready(struct mei_cl_device *cldev) +{ + struct mei_device *bus = cldev->bus; + + switch (bus->pxp_mode) { + case MEI_DEV_PXP_READY: + case MEI_DEV_PXP_DEFAULT: + cldev->do_match = 1; + break; + default: + cldev->do_match = 0; + break; + } +} + +#define MEI_FIXUP(_uuid, _hook) { _uuid, _hook } + +static struct mei_fixup { + + const uuid_le uuid; + void (*hook)(struct mei_cl_device *cldev); +} mei_fixups[] = { + MEI_FIXUP(MEI_UUID_ANY, number_of_connections), + MEI_FIXUP(MEI_UUID_NFC_INFO, blacklist), + MEI_FIXUP(MEI_UUID_NFC_HCI, mei_nfc), + MEI_FIXUP(MEI_UUID_WD, mei_wd), + MEI_FIXUP(MEI_UUID_MKHIF_FIX, mei_mkhi_fix), + MEI_FIXUP(MEI_UUID_IGSC_MKHI_FIX, mei_gsc_mkhi_fix_ver), + MEI_FIXUP(MEI_UUID_IGSC_MKHI, mei_gsc_mkhi_ver), + MEI_FIXUP(MEI_UUID_HDCP, whitelist), + MEI_FIXUP(MEI_UUID_ANY, vt_support), + MEI_FIXUP(MEI_UUID_PAVP, pxp_is_ready), +}; + +/** + * mei_cl_bus_dev_fixup - run fixup handlers + * + * @cldev: me client device + */ +void mei_cl_bus_dev_fixup(struct mei_cl_device *cldev) +{ + struct mei_fixup *f; + const uuid_le *uuid = mei_me_cl_uuid(cldev->me_cl); + size_t i; + + for (i = 0; i < ARRAY_SIZE(mei_fixups); i++) { + + f = &mei_fixups[i]; + if (uuid_le_cmp(f->uuid, MEI_UUID_ANY) == 0 || + uuid_le_cmp(f->uuid, *uuid) == 0) + f->hook(cldev); + } +} + diff --git a/drivers/misc/mei/bus.c b/drivers/misc/mei/bus.c new file mode 100644 index 0000000000..2e65ce6bde --- /dev/null +++ b/drivers/misc/mei/bus.c @@ -0,0 +1,1556 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2012-2023, Intel Corporation. All rights reserved. + * Intel Management Engine Interface (Intel MEI) Linux driver + */ + +#include <linux/module.h> +#include <linux/device.h> +#include <linux/kernel.h> +#include <linux/sched/signal.h> +#include <linux/init.h> +#include <linux/errno.h> +#include <linux/slab.h> +#include <linux/mutex.h> +#include <linux/interrupt.h> +#include <linux/scatterlist.h> +#include <linux/mei_cl_bus.h> + +#include "mei_dev.h" +#include "client.h" + +#define to_mei_cl_driver(d) container_of(d, struct mei_cl_driver, driver) + +/** + * __mei_cl_send - internal client send (write) + * + * @cl: host client + * @buf: buffer to send + * @length: buffer length + * @vtag: virtual tag + * @mode: sending mode + * + * Return: written size bytes or < 0 on error + */ +ssize_t __mei_cl_send(struct mei_cl *cl, const u8 *buf, size_t length, u8 vtag, + unsigned int mode) +{ + return __mei_cl_send_timeout(cl, buf, length, vtag, mode, MAX_SCHEDULE_TIMEOUT); +} + +/** + * __mei_cl_send_timeout - internal client send (write) + * + * @cl: host client + * @buf: buffer to send + * @length: buffer length + * @vtag: virtual tag + * @mode: sending mode + * @timeout: send timeout in milliseconds. + * effective only for blocking writes: the MEI_CL_IO_TX_BLOCKING mode bit is set. + * set timeout to the MAX_SCHEDULE_TIMEOUT to maixum allowed wait. + * + * Return: written size bytes or < 0 on error + */ +ssize_t __mei_cl_send_timeout(struct mei_cl *cl, const u8 *buf, size_t length, u8 vtag, + unsigned int mode, unsigned long timeout) +{ + struct mei_device *bus; + struct mei_cl_cb *cb; + ssize_t rets; + + if (WARN_ON(!cl || !cl->dev)) + return -ENODEV; + + bus = cl->dev; + + mutex_lock(&bus->device_lock); + if (bus->dev_state != MEI_DEV_ENABLED && + bus->dev_state != MEI_DEV_POWERING_DOWN) { + rets = -ENODEV; + goto out; + } + + if (!mei_cl_is_connected(cl)) { + rets = -ENODEV; + goto out; + } + + /* Check if we have an ME client device */ + if (!mei_me_cl_is_active(cl->me_cl)) { + rets = -ENOTTY; + goto out; + } + + if (vtag) { + /* Check if vtag is supported by client */ + rets = mei_cl_vt_support_check(cl); + if (rets) + goto out; + } + + if (length > mei_cl_mtu(cl)) { + rets = -EFBIG; + goto out; + } + + while (cl->tx_cb_queued >= bus->tx_queue_limit) { + mutex_unlock(&bus->device_lock); + rets = wait_event_interruptible(cl->tx_wait, + cl->writing_state == MEI_WRITE_COMPLETE || + (!mei_cl_is_connected(cl))); + mutex_lock(&bus->device_lock); + if (rets) { + if (signal_pending(current)) + rets = -EINTR; + goto out; + } + if (!mei_cl_is_connected(cl)) { + rets = -ENODEV; + goto out; + } + } + + cb = mei_cl_alloc_cb(cl, length, MEI_FOP_WRITE, NULL); + if (!cb) { + rets = -ENOMEM; + goto out; + } + cb->vtag = vtag; + + cb->internal = !!(mode & MEI_CL_IO_TX_INTERNAL); + cb->blocking = !!(mode & MEI_CL_IO_TX_BLOCKING); + memcpy(cb->buf.data, buf, length); + /* hack we point data to header */ + if (mode & MEI_CL_IO_SGL) { + cb->ext_hdr = (struct mei_ext_hdr *)cb->buf.data; + cb->buf.data = NULL; + cb->buf.size = 0; + } + + rets = mei_cl_write(cl, cb, timeout); + + if (mode & MEI_CL_IO_SGL && rets == 0) + rets = length; + +out: + mutex_unlock(&bus->device_lock); + + return rets; +} + +/** + * __mei_cl_recv - internal client receive (read) + * + * @cl: host client + * @buf: buffer to receive + * @length: buffer length + * @mode: io mode + * @vtag: virtual tag + * @timeout: recv timeout, 0 for infinite timeout + * + * Return: read size in bytes of < 0 on error + */ +ssize_t __mei_cl_recv(struct mei_cl *cl, u8 *buf, size_t length, u8 *vtag, + unsigned int mode, unsigned long timeout) +{ + struct mei_device *bus; + struct mei_cl_cb *cb; + size_t r_length; + ssize_t rets; + bool nonblock = !!(mode & MEI_CL_IO_RX_NONBLOCK); + + if (WARN_ON(!cl || !cl->dev)) + return -ENODEV; + + bus = cl->dev; + + mutex_lock(&bus->device_lock); + if (bus->dev_state != MEI_DEV_ENABLED && + bus->dev_state != MEI_DEV_POWERING_DOWN) { + rets = -ENODEV; + goto out; + } + + cb = mei_cl_read_cb(cl, NULL); + if (cb) + goto copy; + + rets = mei_cl_read_start(cl, length, NULL); + if (rets && rets != -EBUSY) + goto out; + + if (nonblock) { + rets = -EAGAIN; + goto out; + } + + /* wait on event only if there is no other waiter */ + /* synchronized under device mutex */ + if (!waitqueue_active(&cl->rx_wait)) { + + mutex_unlock(&bus->device_lock); + + if (timeout) { + rets = wait_event_interruptible_timeout + (cl->rx_wait, + mei_cl_read_cb(cl, NULL) || + (!mei_cl_is_connected(cl)), + msecs_to_jiffies(timeout)); + if (rets == 0) + return -ETIME; + if (rets < 0) { + if (signal_pending(current)) + return -EINTR; + return -ERESTARTSYS; + } + } else { + if (wait_event_interruptible + (cl->rx_wait, + mei_cl_read_cb(cl, NULL) || + (!mei_cl_is_connected(cl)))) { + if (signal_pending(current)) + return -EINTR; + return -ERESTARTSYS; + } + } + + mutex_lock(&bus->device_lock); + + if (!mei_cl_is_connected(cl)) { + rets = -ENODEV; + goto out; + } + } + + cb = mei_cl_read_cb(cl, NULL); + if (!cb) { + rets = 0; + goto out; + } + +copy: + if (cb->status) { + rets = cb->status; + goto free; + } + + /* for the GSC type - copy the extended header to the buffer */ + if (cb->ext_hdr && cb->ext_hdr->type == MEI_EXT_HDR_GSC) { + r_length = min_t(size_t, length, cb->ext_hdr->length * sizeof(u32)); + memcpy(buf, cb->ext_hdr, r_length); + } else { + r_length = min_t(size_t, length, cb->buf_idx); + memcpy(buf, cb->buf.data, r_length); + } + rets = r_length; + + if (vtag) + *vtag = cb->vtag; + +free: + mei_cl_del_rd_completed(cl, cb); +out: + mutex_unlock(&bus->device_lock); + + return rets; +} + +/** + * mei_cldev_send_vtag - me device send with vtag (write) + * + * @cldev: me client device + * @buf: buffer to send + * @length: buffer length + * @vtag: virtual tag + * + * Return: + * * written size in bytes + * * < 0 on error + */ + +ssize_t mei_cldev_send_vtag(struct mei_cl_device *cldev, const u8 *buf, + size_t length, u8 vtag) +{ + struct mei_cl *cl = cldev->cl; + + return __mei_cl_send(cl, buf, length, vtag, MEI_CL_IO_TX_BLOCKING); +} +EXPORT_SYMBOL_GPL(mei_cldev_send_vtag); + +/** + * mei_cldev_recv_vtag - client receive with vtag (read) + * + * @cldev: me client device + * @buf: buffer to receive + * @length: buffer length + * @vtag: virtual tag + * + * Return: + * * read size in bytes + * * < 0 on error + */ + +ssize_t mei_cldev_recv_vtag(struct mei_cl_device *cldev, u8 *buf, size_t length, + u8 *vtag) +{ + struct mei_cl *cl = cldev->cl; + + return __mei_cl_recv(cl, buf, length, vtag, 0, 0); +} +EXPORT_SYMBOL_GPL(mei_cldev_recv_vtag); + +/** + * mei_cldev_recv_nonblock_vtag - non block client receive with vtag (read) + * + * @cldev: me client device + * @buf: buffer to receive + * @length: buffer length + * @vtag: virtual tag + * + * Return: + * * read size in bytes + * * -EAGAIN if function will block. + * * < 0 on other error + */ +ssize_t mei_cldev_recv_nonblock_vtag(struct mei_cl_device *cldev, u8 *buf, + size_t length, u8 *vtag) +{ + struct mei_cl *cl = cldev->cl; + + return __mei_cl_recv(cl, buf, length, vtag, MEI_CL_IO_RX_NONBLOCK, 0); +} +EXPORT_SYMBOL_GPL(mei_cldev_recv_nonblock_vtag); + +/** + * mei_cldev_send - me device send (write) + * + * @cldev: me client device + * @buf: buffer to send + * @length: buffer length + * + * Return: + * * written size in bytes + * * < 0 on error + */ +ssize_t mei_cldev_send(struct mei_cl_device *cldev, const u8 *buf, size_t length) +{ + return mei_cldev_send_vtag(cldev, buf, length, 0); +} +EXPORT_SYMBOL_GPL(mei_cldev_send); + +/** + * mei_cldev_recv - client receive (read) + * + * @cldev: me client device + * @buf: buffer to receive + * @length: buffer length + * + * Return: read size in bytes of < 0 on error + */ +ssize_t mei_cldev_recv(struct mei_cl_device *cldev, u8 *buf, size_t length) +{ + return mei_cldev_recv_vtag(cldev, buf, length, NULL); +} +EXPORT_SYMBOL_GPL(mei_cldev_recv); + +/** + * mei_cldev_recv_nonblock - non block client receive (read) + * + * @cldev: me client device + * @buf: buffer to receive + * @length: buffer length + * + * Return: read size in bytes of < 0 on error + * -EAGAIN if function will block. + */ +ssize_t mei_cldev_recv_nonblock(struct mei_cl_device *cldev, u8 *buf, + size_t length) +{ + return mei_cldev_recv_nonblock_vtag(cldev, buf, length, NULL); +} +EXPORT_SYMBOL_GPL(mei_cldev_recv_nonblock); + +/** + * mei_cl_bus_rx_work - dispatch rx event for a bus device + * + * @work: work + */ +static void mei_cl_bus_rx_work(struct work_struct *work) +{ + struct mei_cl_device *cldev; + struct mei_device *bus; + + cldev = container_of(work, struct mei_cl_device, rx_work); + + bus = cldev->bus; + + if (cldev->rx_cb) + cldev->rx_cb(cldev); + + mutex_lock(&bus->device_lock); + if (mei_cl_is_connected(cldev->cl)) + mei_cl_read_start(cldev->cl, mei_cl_mtu(cldev->cl), NULL); + mutex_unlock(&bus->device_lock); +} + +/** + * mei_cl_bus_notif_work - dispatch FW notif event for a bus device + * + * @work: work + */ +static void mei_cl_bus_notif_work(struct work_struct *work) +{ + struct mei_cl_device *cldev; + + cldev = container_of(work, struct mei_cl_device, notif_work); + + if (cldev->notif_cb) + cldev->notif_cb(cldev); +} + +/** + * mei_cl_bus_notify_event - schedule notify cb on bus client + * + * @cl: host client + * + * Return: true if event was scheduled + * false if the client is not waiting for event + */ +bool mei_cl_bus_notify_event(struct mei_cl *cl) +{ + struct mei_cl_device *cldev = cl->cldev; + + if (!cldev || !cldev->notif_cb) + return false; + + if (!cl->notify_ev) + return false; + + schedule_work(&cldev->notif_work); + + cl->notify_ev = false; + + return true; +} + +/** + * mei_cl_bus_rx_event - schedule rx event + * + * @cl: host client + * + * Return: true if event was scheduled + * false if the client is not waiting for event + */ +bool mei_cl_bus_rx_event(struct mei_cl *cl) +{ + struct mei_cl_device *cldev = cl->cldev; + + if (!cldev || !cldev->rx_cb) + return false; + + schedule_work(&cldev->rx_work); + + return true; +} + +/** + * mei_cldev_register_rx_cb - register Rx event callback + * + * @cldev: me client devices + * @rx_cb: callback function + * + * Return: 0 on success + * -EALREADY if an callback is already registered + * <0 on other errors + */ +int mei_cldev_register_rx_cb(struct mei_cl_device *cldev, mei_cldev_cb_t rx_cb) +{ + struct mei_device *bus = cldev->bus; + int ret; + + if (!rx_cb) + return -EINVAL; + if (cldev->rx_cb) + return -EALREADY; + + cldev->rx_cb = rx_cb; + INIT_WORK(&cldev->rx_work, mei_cl_bus_rx_work); + + mutex_lock(&bus->device_lock); + if (mei_cl_is_connected(cldev->cl)) + ret = mei_cl_read_start(cldev->cl, mei_cl_mtu(cldev->cl), NULL); + else + ret = -ENODEV; + mutex_unlock(&bus->device_lock); + if (ret && ret != -EBUSY) { + cancel_work_sync(&cldev->rx_work); + cldev->rx_cb = NULL; + return ret; + } + + return 0; +} +EXPORT_SYMBOL_GPL(mei_cldev_register_rx_cb); + +/** + * mei_cldev_register_notif_cb - register FW notification event callback + * + * @cldev: me client devices + * @notif_cb: callback function + * + * Return: 0 on success + * -EALREADY if an callback is already registered + * <0 on other errors + */ +int mei_cldev_register_notif_cb(struct mei_cl_device *cldev, + mei_cldev_cb_t notif_cb) +{ + struct mei_device *bus = cldev->bus; + int ret; + + if (!notif_cb) + return -EINVAL; + + if (cldev->notif_cb) + return -EALREADY; + + cldev->notif_cb = notif_cb; + INIT_WORK(&cldev->notif_work, mei_cl_bus_notif_work); + + mutex_lock(&bus->device_lock); + ret = mei_cl_notify_request(cldev->cl, NULL, 1); + mutex_unlock(&bus->device_lock); + if (ret) { + cancel_work_sync(&cldev->notif_work); + cldev->notif_cb = NULL; + return ret; + } + + return 0; +} +EXPORT_SYMBOL_GPL(mei_cldev_register_notif_cb); + +/** + * mei_cldev_get_drvdata - driver data getter + * + * @cldev: mei client device + * + * Return: driver private data + */ +void *mei_cldev_get_drvdata(const struct mei_cl_device *cldev) +{ + return dev_get_drvdata(&cldev->dev); +} +EXPORT_SYMBOL_GPL(mei_cldev_get_drvdata); + +/** + * mei_cldev_set_drvdata - driver data setter + * + * @cldev: mei client device + * @data: data to store + */ +void mei_cldev_set_drvdata(struct mei_cl_device *cldev, void *data) +{ + dev_set_drvdata(&cldev->dev, data); +} +EXPORT_SYMBOL_GPL(mei_cldev_set_drvdata); + +/** + * mei_cldev_uuid - return uuid of the underlying me client + * + * @cldev: mei client device + * + * Return: me client uuid + */ +const uuid_le *mei_cldev_uuid(const struct mei_cl_device *cldev) +{ + return mei_me_cl_uuid(cldev->me_cl); +} +EXPORT_SYMBOL_GPL(mei_cldev_uuid); + +/** + * mei_cldev_ver - return protocol version of the underlying me client + * + * @cldev: mei client device + * + * Return: me client protocol version + */ +u8 mei_cldev_ver(const struct mei_cl_device *cldev) +{ + return mei_me_cl_ver(cldev->me_cl); +} +EXPORT_SYMBOL_GPL(mei_cldev_ver); + +/** + * mei_cldev_enabled - check whether the device is enabled + * + * @cldev: mei client device + * + * Return: true if me client is initialized and connected + */ +bool mei_cldev_enabled(const struct mei_cl_device *cldev) +{ + return mei_cl_is_connected(cldev->cl); +} +EXPORT_SYMBOL_GPL(mei_cldev_enabled); + +/** + * mei_cl_bus_module_get - acquire module of the underlying + * hw driver. + * + * @cldev: mei client device + * + * Return: true on success; false if the module was removed. + */ +static bool mei_cl_bus_module_get(struct mei_cl_device *cldev) +{ + return try_module_get(cldev->bus->dev->driver->owner); +} + +/** + * mei_cl_bus_module_put - release the underlying hw module. + * + * @cldev: mei client device + */ +static void mei_cl_bus_module_put(struct mei_cl_device *cldev) +{ + module_put(cldev->bus->dev->driver->owner); +} + +/** + * mei_cl_bus_vtag - get bus vtag entry wrapper + * The tag for bus client is always first. + * + * @cl: host client + * + * Return: bus vtag or NULL + */ +static inline struct mei_cl_vtag *mei_cl_bus_vtag(struct mei_cl *cl) +{ + return list_first_entry_or_null(&cl->vtag_map, + struct mei_cl_vtag, list); +} + +/** + * mei_cl_bus_vtag_alloc - add bus client entry to vtag map + * + * @cldev: me client device + * + * Return: + * * 0 on success + * * -ENOMEM if memory allocation failed + */ +static int mei_cl_bus_vtag_alloc(struct mei_cl_device *cldev) +{ + struct mei_cl *cl = cldev->cl; + struct mei_cl_vtag *cl_vtag; + + /* + * Bail out if the client does not supports vtags + * or has already allocated one + */ + if (mei_cl_vt_support_check(cl) || mei_cl_bus_vtag(cl)) + return 0; + + cl_vtag = mei_cl_vtag_alloc(NULL, 0); + if (IS_ERR(cl_vtag)) + return -ENOMEM; + + list_add_tail(&cl_vtag->list, &cl->vtag_map); + + return 0; +} + +/** + * mei_cl_bus_vtag_free - remove the bus entry from vtag map + * + * @cldev: me client device + */ +static void mei_cl_bus_vtag_free(struct mei_cl_device *cldev) +{ + struct mei_cl *cl = cldev->cl; + struct mei_cl_vtag *cl_vtag; + + cl_vtag = mei_cl_bus_vtag(cl); + if (!cl_vtag) + return; + + list_del(&cl_vtag->list); + kfree(cl_vtag); +} + +void *mei_cldev_dma_map(struct mei_cl_device *cldev, u8 buffer_id, size_t size) +{ + struct mei_device *bus; + struct mei_cl *cl; + int ret; + + if (!cldev || !buffer_id || !size) + return ERR_PTR(-EINVAL); + + if (!IS_ALIGNED(size, MEI_FW_PAGE_SIZE)) { + dev_err(&cldev->dev, "Map size should be aligned to %lu\n", + MEI_FW_PAGE_SIZE); + return ERR_PTR(-EINVAL); + } + + cl = cldev->cl; + bus = cldev->bus; + + mutex_lock(&bus->device_lock); + if (cl->state == MEI_FILE_UNINITIALIZED) { + ret = mei_cl_link(cl); + if (ret) + goto notlinked; + /* update pointers */ + cl->cldev = cldev; + } + + ret = mei_cl_dma_alloc_and_map(cl, NULL, buffer_id, size); + if (ret) + mei_cl_unlink(cl); +notlinked: + mutex_unlock(&bus->device_lock); + if (ret) + return ERR_PTR(ret); + return cl->dma.vaddr; +} +EXPORT_SYMBOL_GPL(mei_cldev_dma_map); + +int mei_cldev_dma_unmap(struct mei_cl_device *cldev) +{ + struct mei_device *bus; + struct mei_cl *cl; + int ret; + + if (!cldev) + return -EINVAL; + + cl = cldev->cl; + bus = cldev->bus; + + mutex_lock(&bus->device_lock); + ret = mei_cl_dma_unmap(cl, NULL); + + mei_cl_flush_queues(cl, NULL); + mei_cl_unlink(cl); + mutex_unlock(&bus->device_lock); + return ret; +} +EXPORT_SYMBOL_GPL(mei_cldev_dma_unmap); + +/** + * mei_cldev_enable - enable me client device + * create connection with me client + * + * @cldev: me client device + * + * Return: 0 on success and < 0 on error + */ +int mei_cldev_enable(struct mei_cl_device *cldev) +{ + struct mei_device *bus = cldev->bus; + struct mei_cl *cl; + int ret; + + cl = cldev->cl; + + mutex_lock(&bus->device_lock); + if (cl->state == MEI_FILE_UNINITIALIZED) { + ret = mei_cl_link(cl); + if (ret) + goto notlinked; + /* update pointers */ + cl->cldev = cldev; + } + + if (mei_cl_is_connected(cl)) { + ret = 0; + goto out; + } + + if (!mei_me_cl_is_active(cldev->me_cl)) { + dev_err(&cldev->dev, "me client is not active\n"); + ret = -ENOTTY; + goto out; + } + + ret = mei_cl_bus_vtag_alloc(cldev); + if (ret) + goto out; + + ret = mei_cl_connect(cl, cldev->me_cl, NULL); + if (ret < 0) { + dev_err(&cldev->dev, "cannot connect\n"); + mei_cl_bus_vtag_free(cldev); + } + +out: + if (ret) + mei_cl_unlink(cl); +notlinked: + mutex_unlock(&bus->device_lock); + + return ret; +} +EXPORT_SYMBOL_GPL(mei_cldev_enable); + +/** + * mei_cldev_unregister_callbacks - internal wrapper for unregistering + * callbacks. + * + * @cldev: client device + */ +static void mei_cldev_unregister_callbacks(struct mei_cl_device *cldev) +{ + if (cldev->rx_cb) { + cancel_work_sync(&cldev->rx_work); + cldev->rx_cb = NULL; + } + + if (cldev->notif_cb) { + cancel_work_sync(&cldev->notif_work); + cldev->notif_cb = NULL; + } +} + +/** + * mei_cldev_disable - disable me client device + * disconnect form the me client + * + * @cldev: me client device + * + * Return: 0 on success and < 0 on error + */ +int mei_cldev_disable(struct mei_cl_device *cldev) +{ + struct mei_device *bus; + struct mei_cl *cl; + int err; + + if (!cldev) + return -ENODEV; + + cl = cldev->cl; + + bus = cldev->bus; + + mei_cldev_unregister_callbacks(cldev); + + mutex_lock(&bus->device_lock); + + mei_cl_bus_vtag_free(cldev); + + if (!mei_cl_is_connected(cl)) { + dev_dbg(bus->dev, "Already disconnected\n"); + err = 0; + goto out; + } + + err = mei_cl_disconnect(cl); + if (err < 0) + dev_err(bus->dev, "Could not disconnect from the ME client\n"); + +out: + /* Flush queues and remove any pending read unless we have mapped DMA */ + if (!cl->dma_mapped) { + mei_cl_flush_queues(cl, NULL); + mei_cl_unlink(cl); + } + + mutex_unlock(&bus->device_lock); + return err; +} +EXPORT_SYMBOL_GPL(mei_cldev_disable); + +/** + * mei_cldev_send_gsc_command - sends a gsc command, by sending + * a gsl mei message to gsc and receiving reply from gsc + * + * @cldev: me client device + * @client_id: client id to send the command to + * @fence_id: fence id to send the command to + * @sg_in: scatter gather list containing addresses for rx message buffer + * @total_in_len: total length of data in 'in' sg, can be less than the sum of buffers sizes + * @sg_out: scatter gather list containing addresses for tx message buffer + * + * Return: + * * written size in bytes + * * < 0 on error + */ +ssize_t mei_cldev_send_gsc_command(struct mei_cl_device *cldev, + u8 client_id, u32 fence_id, + struct scatterlist *sg_in, + size_t total_in_len, + struct scatterlist *sg_out) +{ + struct mei_cl *cl; + struct mei_device *bus; + ssize_t ret = 0; + + struct mei_ext_hdr_gsc_h2f *ext_hdr; + size_t buf_sz = sizeof(struct mei_ext_hdr_gsc_h2f); + int sg_out_nents, sg_in_nents; + int i; + struct scatterlist *sg; + struct mei_ext_hdr_gsc_f2h rx_msg; + unsigned int sg_len; + + if (!cldev || !sg_in || !sg_out) + return -EINVAL; + + cl = cldev->cl; + bus = cldev->bus; + + dev_dbg(bus->dev, "client_id %u, fence_id %u\n", client_id, fence_id); + + if (!bus->hbm_f_gsc_supported) + return -EOPNOTSUPP; + + sg_out_nents = sg_nents(sg_out); + sg_in_nents = sg_nents(sg_in); + /* at least one entry in tx and rx sgls must be present */ + if (sg_out_nents <= 0 || sg_in_nents <= 0) + return -EINVAL; + + buf_sz += (sg_out_nents + sg_in_nents) * sizeof(struct mei_gsc_sgl); + ext_hdr = kzalloc(buf_sz, GFP_KERNEL); + if (!ext_hdr) + return -ENOMEM; + + /* construct the GSC message */ + ext_hdr->hdr.type = MEI_EXT_HDR_GSC; + ext_hdr->hdr.length = buf_sz / sizeof(u32); /* length is in dw */ + + ext_hdr->client_id = client_id; + ext_hdr->addr_type = GSC_ADDRESS_TYPE_PHYSICAL_SGL; + ext_hdr->fence_id = fence_id; + ext_hdr->input_address_count = sg_in_nents; + ext_hdr->output_address_count = sg_out_nents; + ext_hdr->reserved[0] = 0; + ext_hdr->reserved[1] = 0; + + /* copy in-sgl to the message */ + for (i = 0, sg = sg_in; i < sg_in_nents; i++, sg++) { + ext_hdr->sgl[i].low = lower_32_bits(sg_dma_address(sg)); + ext_hdr->sgl[i].high = upper_32_bits(sg_dma_address(sg)); + sg_len = min_t(unsigned int, sg_dma_len(sg), PAGE_SIZE); + ext_hdr->sgl[i].length = (sg_len <= total_in_len) ? sg_len : total_in_len; + total_in_len -= ext_hdr->sgl[i].length; + } + + /* copy out-sgl to the message */ + for (i = sg_in_nents, sg = sg_out; i < sg_in_nents + sg_out_nents; i++, sg++) { + ext_hdr->sgl[i].low = lower_32_bits(sg_dma_address(sg)); + ext_hdr->sgl[i].high = upper_32_bits(sg_dma_address(sg)); + sg_len = min_t(unsigned int, sg_dma_len(sg), PAGE_SIZE); + ext_hdr->sgl[i].length = sg_len; + } + + /* send the message to GSC */ + ret = __mei_cl_send(cl, (u8 *)ext_hdr, buf_sz, 0, MEI_CL_IO_SGL); + if (ret < 0) { + dev_err(bus->dev, "__mei_cl_send failed, returned %zd\n", ret); + goto end; + } + if (ret != buf_sz) { + dev_err(bus->dev, "__mei_cl_send returned %zd instead of expected %zd\n", + ret, buf_sz); + ret = -EIO; + goto end; + } + + /* receive the reply from GSC, note that at this point sg_in should contain the reply */ + ret = __mei_cl_recv(cl, (u8 *)&rx_msg, sizeof(rx_msg), NULL, MEI_CL_IO_SGL, 0); + + if (ret != sizeof(rx_msg)) { + dev_err(bus->dev, "__mei_cl_recv returned %zd instead of expected %zd\n", + ret, sizeof(rx_msg)); + if (ret >= 0) + ret = -EIO; + goto end; + } + + /* check rx_msg.client_id and rx_msg.fence_id match the ones we send */ + if (rx_msg.client_id != client_id || rx_msg.fence_id != fence_id) { + dev_err(bus->dev, "received client_id/fence_id %u/%u instead of %u/%u sent\n", + rx_msg.client_id, rx_msg.fence_id, client_id, fence_id); + ret = -EFAULT; + goto end; + } + + dev_dbg(bus->dev, "gsc command: successfully written %u bytes\n", rx_msg.written); + ret = rx_msg.written; + +end: + kfree(ext_hdr); + return ret; +} +EXPORT_SYMBOL_GPL(mei_cldev_send_gsc_command); + +/** + * mei_cl_device_find - find matching entry in the driver id table + * + * @cldev: me client device + * @cldrv: me client driver + * + * Return: id on success; NULL if no id is matching + */ +static const +struct mei_cl_device_id *mei_cl_device_find(const struct mei_cl_device *cldev, + const struct mei_cl_driver *cldrv) +{ + const struct mei_cl_device_id *id; + const uuid_le *uuid; + u8 version; + bool match; + + uuid = mei_me_cl_uuid(cldev->me_cl); + version = mei_me_cl_ver(cldev->me_cl); + + id = cldrv->id_table; + while (uuid_le_cmp(NULL_UUID_LE, id->uuid)) { + if (!uuid_le_cmp(*uuid, id->uuid)) { + match = true; + + if (cldev->name[0]) + if (strncmp(cldev->name, id->name, + sizeof(id->name))) + match = false; + + if (id->version != MEI_CL_VERSION_ANY) + if (id->version != version) + match = false; + if (match) + return id; + } + + id++; + } + + return NULL; +} + +/** + * mei_cl_device_match - device match function + * + * @dev: device + * @drv: driver + * + * Return: 1 if matching device was found 0 otherwise + */ +static int mei_cl_device_match(struct device *dev, struct device_driver *drv) +{ + const struct mei_cl_device *cldev = to_mei_cl_device(dev); + const struct mei_cl_driver *cldrv = to_mei_cl_driver(drv); + const struct mei_cl_device_id *found_id; + + if (!cldev->do_match) + return 0; + + if (!cldrv || !cldrv->id_table) + return 0; + + found_id = mei_cl_device_find(cldev, cldrv); + if (found_id) + return 1; + + return 0; +} + +/** + * mei_cl_device_probe - bus probe function + * + * @dev: device + * + * Return: 0 on success; < 0 otherwise + */ +static int mei_cl_device_probe(struct device *dev) +{ + struct mei_cl_device *cldev; + struct mei_cl_driver *cldrv; + const struct mei_cl_device_id *id; + int ret; + + cldev = to_mei_cl_device(dev); + cldrv = to_mei_cl_driver(dev->driver); + + if (!cldrv || !cldrv->probe) + return -ENODEV; + + id = mei_cl_device_find(cldev, cldrv); + if (!id) + return -ENODEV; + + if (!mei_cl_bus_module_get(cldev)) { + dev_err(&cldev->dev, "get hw module failed"); + return -ENODEV; + } + + ret = cldrv->probe(cldev, id); + if (ret) { + mei_cl_bus_module_put(cldev); + return ret; + } + + __module_get(THIS_MODULE); + return 0; +} + +/** + * mei_cl_device_remove - remove device from the bus + * + * @dev: device + * + * Return: 0 on success; < 0 otherwise + */ +static void mei_cl_device_remove(struct device *dev) +{ + struct mei_cl_device *cldev = to_mei_cl_device(dev); + struct mei_cl_driver *cldrv = to_mei_cl_driver(dev->driver); + + if (cldrv->remove) + cldrv->remove(cldev); + + mei_cldev_unregister_callbacks(cldev); + + mei_cl_bus_module_put(cldev); + module_put(THIS_MODULE); +} + +static ssize_t name_show(struct device *dev, struct device_attribute *a, + char *buf) +{ + struct mei_cl_device *cldev = to_mei_cl_device(dev); + + return scnprintf(buf, PAGE_SIZE, "%s", cldev->name); +} +static DEVICE_ATTR_RO(name); + +static ssize_t uuid_show(struct device *dev, struct device_attribute *a, + char *buf) +{ + struct mei_cl_device *cldev = to_mei_cl_device(dev); + const uuid_le *uuid = mei_me_cl_uuid(cldev->me_cl); + + return sprintf(buf, "%pUl", uuid); +} +static DEVICE_ATTR_RO(uuid); + +static ssize_t version_show(struct device *dev, struct device_attribute *a, + char *buf) +{ + struct mei_cl_device *cldev = to_mei_cl_device(dev); + u8 version = mei_me_cl_ver(cldev->me_cl); + + return sprintf(buf, "%02X", version); +} +static DEVICE_ATTR_RO(version); + +static ssize_t modalias_show(struct device *dev, struct device_attribute *a, + char *buf) +{ + struct mei_cl_device *cldev = to_mei_cl_device(dev); + const uuid_le *uuid = mei_me_cl_uuid(cldev->me_cl); + u8 version = mei_me_cl_ver(cldev->me_cl); + + return scnprintf(buf, PAGE_SIZE, "mei:%s:%pUl:%02X:", + cldev->name, uuid, version); +} +static DEVICE_ATTR_RO(modalias); + +static ssize_t max_conn_show(struct device *dev, struct device_attribute *a, + char *buf) +{ + struct mei_cl_device *cldev = to_mei_cl_device(dev); + u8 maxconn = mei_me_cl_max_conn(cldev->me_cl); + + return sprintf(buf, "%d", maxconn); +} +static DEVICE_ATTR_RO(max_conn); + +static ssize_t fixed_show(struct device *dev, struct device_attribute *a, + char *buf) +{ + struct mei_cl_device *cldev = to_mei_cl_device(dev); + u8 fixed = mei_me_cl_fixed(cldev->me_cl); + + return sprintf(buf, "%d", fixed); +} +static DEVICE_ATTR_RO(fixed); + +static ssize_t vtag_show(struct device *dev, struct device_attribute *a, + char *buf) +{ + struct mei_cl_device *cldev = to_mei_cl_device(dev); + bool vt = mei_me_cl_vt(cldev->me_cl); + + return sprintf(buf, "%d", vt); +} +static DEVICE_ATTR_RO(vtag); + +static ssize_t max_len_show(struct device *dev, struct device_attribute *a, + char *buf) +{ + struct mei_cl_device *cldev = to_mei_cl_device(dev); + u32 maxlen = mei_me_cl_max_len(cldev->me_cl); + + return sprintf(buf, "%u", maxlen); +} +static DEVICE_ATTR_RO(max_len); + +static struct attribute *mei_cldev_attrs[] = { + &dev_attr_name.attr, + &dev_attr_uuid.attr, + &dev_attr_version.attr, + &dev_attr_modalias.attr, + &dev_attr_max_conn.attr, + &dev_attr_fixed.attr, + &dev_attr_vtag.attr, + &dev_attr_max_len.attr, + NULL, +}; +ATTRIBUTE_GROUPS(mei_cldev); + +/** + * mei_cl_device_uevent - me client bus uevent handler + * + * @dev: device + * @env: uevent kobject + * + * Return: 0 on success -ENOMEM on when add_uevent_var fails + */ +static int mei_cl_device_uevent(const struct device *dev, struct kobj_uevent_env *env) +{ + const struct mei_cl_device *cldev = to_mei_cl_device(dev); + const uuid_le *uuid = mei_me_cl_uuid(cldev->me_cl); + u8 version = mei_me_cl_ver(cldev->me_cl); + + if (add_uevent_var(env, "MEI_CL_VERSION=%d", version)) + return -ENOMEM; + + if (add_uevent_var(env, "MEI_CL_UUID=%pUl", uuid)) + return -ENOMEM; + + if (add_uevent_var(env, "MEI_CL_NAME=%s", cldev->name)) + return -ENOMEM; + + if (add_uevent_var(env, "MODALIAS=mei:%s:%pUl:%02X:", + cldev->name, uuid, version)) + return -ENOMEM; + + return 0; +} + +static struct bus_type mei_cl_bus_type = { + .name = "mei", + .dev_groups = mei_cldev_groups, + .match = mei_cl_device_match, + .probe = mei_cl_device_probe, + .remove = mei_cl_device_remove, + .uevent = mei_cl_device_uevent, +}; + +static struct mei_device *mei_dev_bus_get(struct mei_device *bus) +{ + if (bus) + get_device(bus->dev); + + return bus; +} + +static void mei_dev_bus_put(struct mei_device *bus) +{ + if (bus) + put_device(bus->dev); +} + +static void mei_cl_bus_dev_release(struct device *dev) +{ + struct mei_cl_device *cldev = to_mei_cl_device(dev); + + mei_cl_flush_queues(cldev->cl, NULL); + mei_me_cl_put(cldev->me_cl); + mei_dev_bus_put(cldev->bus); + kfree(cldev->cl); + kfree(cldev); +} + +static const struct device_type mei_cl_device_type = { + .release = mei_cl_bus_dev_release, +}; + +/** + * mei_cl_bus_set_name - set device name for me client device + * <controller>-<client device> + * Example: 0000:00:16.0-55213584-9a29-4916-badf-0fb7ed682aeb + * + * @cldev: me client device + */ +static inline void mei_cl_bus_set_name(struct mei_cl_device *cldev) +{ + dev_set_name(&cldev->dev, "%s-%pUl", + dev_name(cldev->bus->dev), + mei_me_cl_uuid(cldev->me_cl)); +} + +/** + * mei_cl_bus_dev_alloc - initialize and allocate mei client device + * + * @bus: mei device + * @me_cl: me client + * + * Return: allocated device structur or NULL on allocation failure + */ +static struct mei_cl_device *mei_cl_bus_dev_alloc(struct mei_device *bus, + struct mei_me_client *me_cl) +{ + struct mei_cl_device *cldev; + struct mei_cl *cl; + + cldev = kzalloc(sizeof(*cldev), GFP_KERNEL); + if (!cldev) + return NULL; + + cl = mei_cl_allocate(bus); + if (!cl) { + kfree(cldev); + return NULL; + } + + device_initialize(&cldev->dev); + cldev->dev.parent = bus->dev; + cldev->dev.bus = &mei_cl_bus_type; + cldev->dev.type = &mei_cl_device_type; + cldev->bus = mei_dev_bus_get(bus); + cldev->me_cl = mei_me_cl_get(me_cl); + cldev->cl = cl; + mei_cl_bus_set_name(cldev); + cldev->is_added = 0; + INIT_LIST_HEAD(&cldev->bus_list); + device_enable_async_suspend(&cldev->dev); + + return cldev; +} + +/** + * mei_cl_bus_dev_setup - setup me client device + * run fix up routines and set the device name + * + * @bus: mei device + * @cldev: me client device + * + * Return: true if the device is eligible for enumeration + */ +static bool mei_cl_bus_dev_setup(struct mei_device *bus, + struct mei_cl_device *cldev) +{ + cldev->do_match = 1; + mei_cl_bus_dev_fixup(cldev); + + /* the device name can change during fix up */ + if (cldev->do_match) + mei_cl_bus_set_name(cldev); + + return cldev->do_match == 1; +} + +/** + * mei_cl_bus_dev_add - add me client devices + * + * @cldev: me client device + * + * Return: 0 on success; < 0 on failre + */ +static int mei_cl_bus_dev_add(struct mei_cl_device *cldev) +{ + int ret; + + dev_dbg(cldev->bus->dev, "adding %pUL:%02X\n", + mei_me_cl_uuid(cldev->me_cl), + mei_me_cl_ver(cldev->me_cl)); + ret = device_add(&cldev->dev); + if (!ret) + cldev->is_added = 1; + + return ret; +} + +/** + * mei_cl_bus_dev_stop - stop the driver + * + * @cldev: me client device + */ +static void mei_cl_bus_dev_stop(struct mei_cl_device *cldev) +{ + cldev->do_match = 0; + if (cldev->is_added) + device_release_driver(&cldev->dev); +} + +/** + * mei_cl_bus_dev_destroy - destroy me client devices object + * + * @cldev: me client device + * + * Locking: called under "dev->cl_bus_lock" lock + */ +static void mei_cl_bus_dev_destroy(struct mei_cl_device *cldev) +{ + + WARN_ON(!mutex_is_locked(&cldev->bus->cl_bus_lock)); + + if (!cldev->is_added) + return; + + device_del(&cldev->dev); + + list_del_init(&cldev->bus_list); + + cldev->is_added = 0; + put_device(&cldev->dev); +} + +/** + * mei_cl_bus_remove_device - remove a devices form the bus + * + * @cldev: me client device + */ +static void mei_cl_bus_remove_device(struct mei_cl_device *cldev) +{ + mei_cl_bus_dev_stop(cldev); + mei_cl_bus_dev_destroy(cldev); +} + +/** + * mei_cl_bus_remove_devices - remove all devices form the bus + * + * @bus: mei device + */ +void mei_cl_bus_remove_devices(struct mei_device *bus) +{ + struct mei_cl_device *cldev, *next; + + mutex_lock(&bus->cl_bus_lock); + list_for_each_entry_safe(cldev, next, &bus->device_list, bus_list) + mei_cl_bus_remove_device(cldev); + mutex_unlock(&bus->cl_bus_lock); +} + + +/** + * mei_cl_bus_dev_init - allocate and initializes an mei client devices + * based on me client + * + * @bus: mei device + * @me_cl: me client + * + * Locking: called under "dev->cl_bus_lock" lock + */ +static void mei_cl_bus_dev_init(struct mei_device *bus, + struct mei_me_client *me_cl) +{ + struct mei_cl_device *cldev; + + WARN_ON(!mutex_is_locked(&bus->cl_bus_lock)); + + dev_dbg(bus->dev, "initializing %pUl", mei_me_cl_uuid(me_cl)); + + if (me_cl->bus_added) + return; + + cldev = mei_cl_bus_dev_alloc(bus, me_cl); + if (!cldev) + return; + + me_cl->bus_added = true; + list_add_tail(&cldev->bus_list, &bus->device_list); + +} + +/** + * mei_cl_bus_rescan - scan me clients list and add create + * devices for eligible clients + * + * @bus: mei device + */ +static void mei_cl_bus_rescan(struct mei_device *bus) +{ + struct mei_cl_device *cldev, *n; + struct mei_me_client *me_cl; + + mutex_lock(&bus->cl_bus_lock); + + down_read(&bus->me_clients_rwsem); + list_for_each_entry(me_cl, &bus->me_clients, list) + mei_cl_bus_dev_init(bus, me_cl); + up_read(&bus->me_clients_rwsem); + + list_for_each_entry_safe(cldev, n, &bus->device_list, bus_list) { + + if (!mei_me_cl_is_active(cldev->me_cl)) { + mei_cl_bus_remove_device(cldev); + continue; + } + + if (cldev->is_added) + continue; + + if (mei_cl_bus_dev_setup(bus, cldev)) + mei_cl_bus_dev_add(cldev); + else { + list_del_init(&cldev->bus_list); + put_device(&cldev->dev); + } + } + mutex_unlock(&bus->cl_bus_lock); + + dev_dbg(bus->dev, "rescan end"); +} + +void mei_cl_bus_rescan_work(struct work_struct *work) +{ + struct mei_device *bus = + container_of(work, struct mei_device, bus_rescan_work); + + mei_cl_bus_rescan(bus); +} + +int __mei_cldev_driver_register(struct mei_cl_driver *cldrv, + struct module *owner) +{ + int err; + + cldrv->driver.name = cldrv->name; + cldrv->driver.owner = owner; + cldrv->driver.bus = &mei_cl_bus_type; + + err = driver_register(&cldrv->driver); + if (err) + return err; + + pr_debug("mei: driver [%s] registered\n", cldrv->driver.name); + + return 0; +} +EXPORT_SYMBOL_GPL(__mei_cldev_driver_register); + +void mei_cldev_driver_unregister(struct mei_cl_driver *cldrv) +{ + driver_unregister(&cldrv->driver); + + pr_debug("mei: driver [%s] unregistered\n", cldrv->driver.name); +} +EXPORT_SYMBOL_GPL(mei_cldev_driver_unregister); + + +int __init mei_cl_bus_init(void) +{ + return bus_register(&mei_cl_bus_type); +} + +void __exit mei_cl_bus_exit(void) +{ + bus_unregister(&mei_cl_bus_type); +} diff --git a/drivers/misc/mei/client.c b/drivers/misc/mei/client.c new file mode 100644 index 0000000000..32f2287823 --- /dev/null +++ b/drivers/misc/mei/client.c @@ -0,0 +1,2474 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2003-2022, Intel Corporation. All rights reserved. + * Intel Management Engine Interface (Intel MEI) Linux driver + */ + +#include <linux/sched/signal.h> +#include <linux/wait.h> +#include <linux/delay.h> +#include <linux/slab.h> +#include <linux/pm_runtime.h> +#include <linux/dma-mapping.h> + +#include <linux/mei.h> + +#include "mei_dev.h" +#include "hbm.h" +#include "client.h" + +/** + * mei_me_cl_init - initialize me client + * + * @me_cl: me client + */ +void mei_me_cl_init(struct mei_me_client *me_cl) +{ + INIT_LIST_HEAD(&me_cl->list); + kref_init(&me_cl->refcnt); +} + +/** + * mei_me_cl_get - increases me client refcount + * + * @me_cl: me client + * + * Locking: called under "dev->device_lock" lock + * + * Return: me client or NULL + */ +struct mei_me_client *mei_me_cl_get(struct mei_me_client *me_cl) +{ + if (me_cl && kref_get_unless_zero(&me_cl->refcnt)) + return me_cl; + + return NULL; +} + +/** + * mei_me_cl_release - free me client + * + * Locking: called under "dev->device_lock" lock + * + * @ref: me_client refcount + */ +static void mei_me_cl_release(struct kref *ref) +{ + struct mei_me_client *me_cl = + container_of(ref, struct mei_me_client, refcnt); + + kfree(me_cl); +} + +/** + * mei_me_cl_put - decrease me client refcount and free client if necessary + * + * Locking: called under "dev->device_lock" lock + * + * @me_cl: me client + */ +void mei_me_cl_put(struct mei_me_client *me_cl) +{ + if (me_cl) + kref_put(&me_cl->refcnt, mei_me_cl_release); +} + +/** + * __mei_me_cl_del - delete me client from the list and decrease + * reference counter + * + * @dev: mei device + * @me_cl: me client + * + * Locking: dev->me_clients_rwsem + */ +static void __mei_me_cl_del(struct mei_device *dev, struct mei_me_client *me_cl) +{ + if (!me_cl) + return; + + list_del_init(&me_cl->list); + mei_me_cl_put(me_cl); +} + +/** + * mei_me_cl_del - delete me client from the list and decrease + * reference counter + * + * @dev: mei device + * @me_cl: me client + */ +void mei_me_cl_del(struct mei_device *dev, struct mei_me_client *me_cl) +{ + down_write(&dev->me_clients_rwsem); + __mei_me_cl_del(dev, me_cl); + up_write(&dev->me_clients_rwsem); +} + +/** + * mei_me_cl_add - add me client to the list + * + * @dev: mei device + * @me_cl: me client + */ +void mei_me_cl_add(struct mei_device *dev, struct mei_me_client *me_cl) +{ + down_write(&dev->me_clients_rwsem); + list_add(&me_cl->list, &dev->me_clients); + up_write(&dev->me_clients_rwsem); +} + +/** + * __mei_me_cl_by_uuid - locate me client by uuid + * increases ref count + * + * @dev: mei device + * @uuid: me client uuid + * + * Return: me client or NULL if not found + * + * Locking: dev->me_clients_rwsem + */ +static struct mei_me_client *__mei_me_cl_by_uuid(struct mei_device *dev, + const uuid_le *uuid) +{ + struct mei_me_client *me_cl; + const uuid_le *pn; + + WARN_ON(!rwsem_is_locked(&dev->me_clients_rwsem)); + + list_for_each_entry(me_cl, &dev->me_clients, list) { + pn = &me_cl->props.protocol_name; + if (uuid_le_cmp(*uuid, *pn) == 0) + return mei_me_cl_get(me_cl); + } + + return NULL; +} + +/** + * mei_me_cl_by_uuid - locate me client by uuid + * increases ref count + * + * @dev: mei device + * @uuid: me client uuid + * + * Return: me client or NULL if not found + * + * Locking: dev->me_clients_rwsem + */ +struct mei_me_client *mei_me_cl_by_uuid(struct mei_device *dev, + const uuid_le *uuid) +{ + struct mei_me_client *me_cl; + + down_read(&dev->me_clients_rwsem); + me_cl = __mei_me_cl_by_uuid(dev, uuid); + up_read(&dev->me_clients_rwsem); + + return me_cl; +} + +/** + * mei_me_cl_by_id - locate me client by client id + * increases ref count + * + * @dev: the device structure + * @client_id: me client id + * + * Return: me client or NULL if not found + * + * Locking: dev->me_clients_rwsem + */ +struct mei_me_client *mei_me_cl_by_id(struct mei_device *dev, u8 client_id) +{ + + struct mei_me_client *__me_cl, *me_cl = NULL; + + down_read(&dev->me_clients_rwsem); + list_for_each_entry(__me_cl, &dev->me_clients, list) { + if (__me_cl->client_id == client_id) { + me_cl = mei_me_cl_get(__me_cl); + break; + } + } + up_read(&dev->me_clients_rwsem); + + return me_cl; +} + +/** + * __mei_me_cl_by_uuid_id - locate me client by client id and uuid + * increases ref count + * + * @dev: the device structure + * @uuid: me client uuid + * @client_id: me client id + * + * Return: me client or null if not found + * + * Locking: dev->me_clients_rwsem + */ +static struct mei_me_client *__mei_me_cl_by_uuid_id(struct mei_device *dev, + const uuid_le *uuid, u8 client_id) +{ + struct mei_me_client *me_cl; + const uuid_le *pn; + + WARN_ON(!rwsem_is_locked(&dev->me_clients_rwsem)); + + list_for_each_entry(me_cl, &dev->me_clients, list) { + pn = &me_cl->props.protocol_name; + if (uuid_le_cmp(*uuid, *pn) == 0 && + me_cl->client_id == client_id) + return mei_me_cl_get(me_cl); + } + + return NULL; +} + + +/** + * mei_me_cl_by_uuid_id - locate me client by client id and uuid + * increases ref count + * + * @dev: the device structure + * @uuid: me client uuid + * @client_id: me client id + * + * Return: me client or null if not found + */ +struct mei_me_client *mei_me_cl_by_uuid_id(struct mei_device *dev, + const uuid_le *uuid, u8 client_id) +{ + struct mei_me_client *me_cl; + + down_read(&dev->me_clients_rwsem); + me_cl = __mei_me_cl_by_uuid_id(dev, uuid, client_id); + up_read(&dev->me_clients_rwsem); + + return me_cl; +} + +/** + * mei_me_cl_rm_by_uuid - remove all me clients matching uuid + * + * @dev: the device structure + * @uuid: me client uuid + * + * Locking: called under "dev->device_lock" lock + */ +void mei_me_cl_rm_by_uuid(struct mei_device *dev, const uuid_le *uuid) +{ + struct mei_me_client *me_cl; + + dev_dbg(dev->dev, "remove %pUl\n", uuid); + + down_write(&dev->me_clients_rwsem); + me_cl = __mei_me_cl_by_uuid(dev, uuid); + __mei_me_cl_del(dev, me_cl); + mei_me_cl_put(me_cl); + up_write(&dev->me_clients_rwsem); +} + +/** + * mei_me_cl_rm_by_uuid_id - remove all me clients matching client id + * + * @dev: the device structure + * @uuid: me client uuid + * @id: me client id + * + * Locking: called under "dev->device_lock" lock + */ +void mei_me_cl_rm_by_uuid_id(struct mei_device *dev, const uuid_le *uuid, u8 id) +{ + struct mei_me_client *me_cl; + + dev_dbg(dev->dev, "remove %pUl %d\n", uuid, id); + + down_write(&dev->me_clients_rwsem); + me_cl = __mei_me_cl_by_uuid_id(dev, uuid, id); + __mei_me_cl_del(dev, me_cl); + mei_me_cl_put(me_cl); + up_write(&dev->me_clients_rwsem); +} + +/** + * mei_me_cl_rm_all - remove all me clients + * + * @dev: the device structure + * + * Locking: called under "dev->device_lock" lock + */ +void mei_me_cl_rm_all(struct mei_device *dev) +{ + struct mei_me_client *me_cl, *next; + + down_write(&dev->me_clients_rwsem); + list_for_each_entry_safe(me_cl, next, &dev->me_clients, list) + __mei_me_cl_del(dev, me_cl); + up_write(&dev->me_clients_rwsem); +} + +/** + * mei_io_cb_free - free mei_cb_private related memory + * + * @cb: mei callback struct + */ +void mei_io_cb_free(struct mei_cl_cb *cb) +{ + if (cb == NULL) + return; + + list_del(&cb->list); + kfree(cb->buf.data); + kfree(cb->ext_hdr); + kfree(cb); +} + +/** + * mei_tx_cb_enqueue - queue tx callback + * + * Locking: called under "dev->device_lock" lock + * + * @cb: mei callback struct + * @head: an instance of list to queue on + */ +static inline void mei_tx_cb_enqueue(struct mei_cl_cb *cb, + struct list_head *head) +{ + list_add_tail(&cb->list, head); + cb->cl->tx_cb_queued++; +} + +/** + * mei_tx_cb_dequeue - dequeue tx callback + * + * Locking: called under "dev->device_lock" lock + * + * @cb: mei callback struct to dequeue and free + */ +static inline void mei_tx_cb_dequeue(struct mei_cl_cb *cb) +{ + if (!WARN_ON(cb->cl->tx_cb_queued == 0)) + cb->cl->tx_cb_queued--; + + mei_io_cb_free(cb); +} + +/** + * mei_cl_set_read_by_fp - set pending_read flag to vtag struct for given fp + * + * Locking: called under "dev->device_lock" lock + * + * @cl: mei client + * @fp: pointer to file structure + */ +static void mei_cl_set_read_by_fp(const struct mei_cl *cl, + const struct file *fp) +{ + struct mei_cl_vtag *cl_vtag; + + list_for_each_entry(cl_vtag, &cl->vtag_map, list) { + if (cl_vtag->fp == fp) { + cl_vtag->pending_read = true; + return; + } + } +} + +/** + * mei_io_cb_init - allocate and initialize io callback + * + * @cl: mei client + * @type: operation type + * @fp: pointer to file structure + * + * Return: mei_cl_cb pointer or NULL; + */ +static struct mei_cl_cb *mei_io_cb_init(struct mei_cl *cl, + enum mei_cb_file_ops type, + const struct file *fp) +{ + struct mei_cl_cb *cb; + + cb = kzalloc(sizeof(*cb), GFP_KERNEL); + if (!cb) + return NULL; + + INIT_LIST_HEAD(&cb->list); + cb->fp = fp; + cb->cl = cl; + cb->buf_idx = 0; + cb->fop_type = type; + cb->vtag = 0; + cb->ext_hdr = NULL; + + return cb; +} + +/** + * mei_io_list_flush_cl - removes cbs belonging to the cl. + * + * @head: an instance of our list structure + * @cl: host client + */ +static void mei_io_list_flush_cl(struct list_head *head, + const struct mei_cl *cl) +{ + struct mei_cl_cb *cb, *next; + + list_for_each_entry_safe(cb, next, head, list) { + if (cl == cb->cl) { + list_del_init(&cb->list); + if (cb->fop_type == MEI_FOP_READ) + mei_io_cb_free(cb); + } + } +} + +/** + * mei_io_tx_list_free_cl - removes cb belonging to the cl and free them + * + * @head: An instance of our list structure + * @cl: host client + * @fp: file pointer (matching cb file object), may be NULL + */ +static void mei_io_tx_list_free_cl(struct list_head *head, + const struct mei_cl *cl, + const struct file *fp) +{ + struct mei_cl_cb *cb, *next; + + list_for_each_entry_safe(cb, next, head, list) { + if (cl == cb->cl && (!fp || fp == cb->fp)) + mei_tx_cb_dequeue(cb); + } +} + +/** + * mei_io_list_free_fp - free cb from a list that matches file pointer + * + * @head: io list + * @fp: file pointer (matching cb file object), may be NULL + */ +static void mei_io_list_free_fp(struct list_head *head, const struct file *fp) +{ + struct mei_cl_cb *cb, *next; + + list_for_each_entry_safe(cb, next, head, list) + if (!fp || fp == cb->fp) + mei_io_cb_free(cb); +} + +/** + * mei_cl_free_pending - free pending cb + * + * @cl: host client + */ +static void mei_cl_free_pending(struct mei_cl *cl) +{ + struct mei_cl_cb *cb; + + cb = list_first_entry_or_null(&cl->rd_pending, struct mei_cl_cb, list); + mei_io_cb_free(cb); +} + +/** + * mei_cl_alloc_cb - a convenient wrapper for allocating read cb + * + * @cl: host client + * @length: size of the buffer + * @fop_type: operation type + * @fp: associated file pointer (might be NULL) + * + * Return: cb on success and NULL on failure + */ +struct mei_cl_cb *mei_cl_alloc_cb(struct mei_cl *cl, size_t length, + enum mei_cb_file_ops fop_type, + const struct file *fp) +{ + struct mei_cl_cb *cb; + + cb = mei_io_cb_init(cl, fop_type, fp); + if (!cb) + return NULL; + + if (length == 0) + return cb; + + cb->buf.data = kmalloc(roundup(length, MEI_SLOT_SIZE), GFP_KERNEL); + if (!cb->buf.data) { + mei_io_cb_free(cb); + return NULL; + } + cb->buf.size = length; + + return cb; +} + +/** + * mei_cl_enqueue_ctrl_wr_cb - a convenient wrapper for allocating + * and enqueuing of the control commands cb + * + * @cl: host client + * @length: size of the buffer + * @fop_type: operation type + * @fp: associated file pointer (might be NULL) + * + * Return: cb on success and NULL on failure + * Locking: called under "dev->device_lock" lock + */ +struct mei_cl_cb *mei_cl_enqueue_ctrl_wr_cb(struct mei_cl *cl, size_t length, + enum mei_cb_file_ops fop_type, + const struct file *fp) +{ + struct mei_cl_cb *cb; + + /* for RX always allocate at least client's mtu */ + if (length) + length = max_t(size_t, length, mei_cl_mtu(cl)); + + cb = mei_cl_alloc_cb(cl, length, fop_type, fp); + if (!cb) + return NULL; + + list_add_tail(&cb->list, &cl->dev->ctrl_wr_list); + return cb; +} + +/** + * mei_cl_read_cb - find this cl's callback in the read list + * for a specific file + * + * @cl: host client + * @fp: file pointer (matching cb file object), may be NULL + * + * Return: cb on success, NULL if cb is not found + */ +struct mei_cl_cb *mei_cl_read_cb(struct mei_cl *cl, const struct file *fp) +{ + struct mei_cl_cb *cb; + struct mei_cl_cb *ret_cb = NULL; + + spin_lock(&cl->rd_completed_lock); + list_for_each_entry(cb, &cl->rd_completed, list) + if (!fp || fp == cb->fp) { + ret_cb = cb; + break; + } + spin_unlock(&cl->rd_completed_lock); + return ret_cb; +} + +/** + * mei_cl_flush_queues - flushes queue lists belonging to cl. + * + * @cl: host client + * @fp: file pointer (matching cb file object), may be NULL + * + * Return: 0 on success, -EINVAL if cl or cl->dev is NULL. + */ +int mei_cl_flush_queues(struct mei_cl *cl, const struct file *fp) +{ + struct mei_device *dev; + + if (WARN_ON(!cl || !cl->dev)) + return -EINVAL; + + dev = cl->dev; + + cl_dbg(dev, cl, "remove list entry belonging to cl\n"); + mei_io_tx_list_free_cl(&cl->dev->write_list, cl, fp); + mei_io_tx_list_free_cl(&cl->dev->write_waiting_list, cl, fp); + /* free pending and control cb only in final flush */ + if (!fp) { + mei_io_list_flush_cl(&cl->dev->ctrl_wr_list, cl); + mei_io_list_flush_cl(&cl->dev->ctrl_rd_list, cl); + mei_cl_free_pending(cl); + } + spin_lock(&cl->rd_completed_lock); + mei_io_list_free_fp(&cl->rd_completed, fp); + spin_unlock(&cl->rd_completed_lock); + + return 0; +} + +/** + * mei_cl_init - initializes cl. + * + * @cl: host client to be initialized + * @dev: mei device + */ +static void mei_cl_init(struct mei_cl *cl, struct mei_device *dev) +{ + memset(cl, 0, sizeof(*cl)); + init_waitqueue_head(&cl->wait); + init_waitqueue_head(&cl->rx_wait); + init_waitqueue_head(&cl->tx_wait); + init_waitqueue_head(&cl->ev_wait); + INIT_LIST_HEAD(&cl->vtag_map); + spin_lock_init(&cl->rd_completed_lock); + INIT_LIST_HEAD(&cl->rd_completed); + INIT_LIST_HEAD(&cl->rd_pending); + INIT_LIST_HEAD(&cl->link); + cl->writing_state = MEI_IDLE; + cl->state = MEI_FILE_UNINITIALIZED; + cl->dev = dev; +} + +/** + * mei_cl_allocate - allocates cl structure and sets it up. + * + * @dev: mei device + * Return: The allocated file or NULL on failure + */ +struct mei_cl *mei_cl_allocate(struct mei_device *dev) +{ + struct mei_cl *cl; + + cl = kmalloc(sizeof(*cl), GFP_KERNEL); + if (!cl) + return NULL; + + mei_cl_init(cl, dev); + + return cl; +} + +/** + * mei_cl_link - allocate host id in the host map + * + * @cl: host client + * + * Return: 0 on success + * -EINVAL on incorrect values + * -EMFILE if open count exceeded. + */ +int mei_cl_link(struct mei_cl *cl) +{ + struct mei_device *dev; + int id; + + if (WARN_ON(!cl || !cl->dev)) + return -EINVAL; + + dev = cl->dev; + + id = find_first_zero_bit(dev->host_clients_map, MEI_CLIENTS_MAX); + if (id >= MEI_CLIENTS_MAX) { + dev_err(dev->dev, "id exceeded %d", MEI_CLIENTS_MAX); + return -EMFILE; + } + + if (dev->open_handle_count >= MEI_MAX_OPEN_HANDLE_COUNT) { + dev_err(dev->dev, "open_handle_count exceeded %d", + MEI_MAX_OPEN_HANDLE_COUNT); + return -EMFILE; + } + + dev->open_handle_count++; + + cl->host_client_id = id; + list_add_tail(&cl->link, &dev->file_list); + + set_bit(id, dev->host_clients_map); + + cl->state = MEI_FILE_INITIALIZING; + + cl_dbg(dev, cl, "link cl\n"); + return 0; +} + +/** + * mei_cl_unlink - remove host client from the list + * + * @cl: host client + * + * Return: always 0 + */ +int mei_cl_unlink(struct mei_cl *cl) +{ + struct mei_device *dev; + + /* don't shout on error exit path */ + if (!cl) + return 0; + + if (WARN_ON(!cl->dev)) + return 0; + + dev = cl->dev; + + cl_dbg(dev, cl, "unlink client"); + + if (cl->state == MEI_FILE_UNINITIALIZED) + return 0; + + if (dev->open_handle_count > 0) + dev->open_handle_count--; + + /* never clear the 0 bit */ + if (cl->host_client_id) + clear_bit(cl->host_client_id, dev->host_clients_map); + + list_del_init(&cl->link); + + cl->state = MEI_FILE_UNINITIALIZED; + cl->writing_state = MEI_IDLE; + + WARN_ON(!list_empty(&cl->rd_completed) || + !list_empty(&cl->rd_pending) || + !list_empty(&cl->link)); + + return 0; +} + +void mei_host_client_init(struct mei_device *dev) +{ + mei_set_devstate(dev, MEI_DEV_ENABLED); + dev->reset_count = 0; + + schedule_work(&dev->bus_rescan_work); + + pm_runtime_mark_last_busy(dev->dev); + dev_dbg(dev->dev, "rpm: autosuspend\n"); + pm_request_autosuspend(dev->dev); +} + +/** + * mei_hbuf_acquire - try to acquire host buffer + * + * @dev: the device structure + * Return: true if host buffer was acquired + */ +bool mei_hbuf_acquire(struct mei_device *dev) +{ + if (mei_pg_state(dev) == MEI_PG_ON || + mei_pg_in_transition(dev)) { + dev_dbg(dev->dev, "device is in pg\n"); + return false; + } + + if (!dev->hbuf_is_ready) { + dev_dbg(dev->dev, "hbuf is not ready\n"); + return false; + } + + dev->hbuf_is_ready = false; + + return true; +} + +/** + * mei_cl_wake_all - wake up readers, writers and event waiters so + * they can be interrupted + * + * @cl: host client + */ +static void mei_cl_wake_all(struct mei_cl *cl) +{ + struct mei_device *dev = cl->dev; + + /* synchronized under device mutex */ + if (waitqueue_active(&cl->rx_wait)) { + cl_dbg(dev, cl, "Waking up reading client!\n"); + wake_up_interruptible(&cl->rx_wait); + } + /* synchronized under device mutex */ + if (waitqueue_active(&cl->tx_wait)) { + cl_dbg(dev, cl, "Waking up writing client!\n"); + wake_up_interruptible(&cl->tx_wait); + } + /* synchronized under device mutex */ + if (waitqueue_active(&cl->ev_wait)) { + cl_dbg(dev, cl, "Waking up waiting for event clients!\n"); + wake_up_interruptible(&cl->ev_wait); + } + /* synchronized under device mutex */ + if (waitqueue_active(&cl->wait)) { + cl_dbg(dev, cl, "Waking up ctrl write clients!\n"); + wake_up(&cl->wait); + } +} + +/** + * mei_cl_set_disconnected - set disconnected state and clear + * associated states and resources + * + * @cl: host client + */ +static void mei_cl_set_disconnected(struct mei_cl *cl) +{ + struct mei_device *dev = cl->dev; + + if (cl->state == MEI_FILE_DISCONNECTED || + cl->state <= MEI_FILE_INITIALIZING) + return; + + cl->state = MEI_FILE_DISCONNECTED; + mei_io_tx_list_free_cl(&dev->write_list, cl, NULL); + mei_io_tx_list_free_cl(&dev->write_waiting_list, cl, NULL); + mei_io_list_flush_cl(&dev->ctrl_rd_list, cl); + mei_io_list_flush_cl(&dev->ctrl_wr_list, cl); + mei_cl_wake_all(cl); + cl->rx_flow_ctrl_creds = 0; + cl->tx_flow_ctrl_creds = 0; + cl->timer_count = 0; + + if (!cl->me_cl) + return; + + if (!WARN_ON(cl->me_cl->connect_count == 0)) + cl->me_cl->connect_count--; + + if (cl->me_cl->connect_count == 0) + cl->me_cl->tx_flow_ctrl_creds = 0; + + mei_me_cl_put(cl->me_cl); + cl->me_cl = NULL; +} + +static int mei_cl_set_connecting(struct mei_cl *cl, struct mei_me_client *me_cl) +{ + if (!mei_me_cl_get(me_cl)) + return -ENOENT; + + /* only one connection is allowed for fixed address clients */ + if (me_cl->props.fixed_address) { + if (me_cl->connect_count) { + mei_me_cl_put(me_cl); + return -EBUSY; + } + } + + cl->me_cl = me_cl; + cl->state = MEI_FILE_CONNECTING; + cl->me_cl->connect_count++; + + return 0; +} + +/* + * mei_cl_send_disconnect - send disconnect request + * + * @cl: host client + * @cb: callback block + * + * Return: 0, OK; otherwise, error. + */ +static int mei_cl_send_disconnect(struct mei_cl *cl, struct mei_cl_cb *cb) +{ + struct mei_device *dev; + int ret; + + dev = cl->dev; + + ret = mei_hbm_cl_disconnect_req(dev, cl); + cl->status = ret; + if (ret) { + cl->state = MEI_FILE_DISCONNECT_REPLY; + return ret; + } + + list_move_tail(&cb->list, &dev->ctrl_rd_list); + cl->timer_count = dev->timeouts.connect; + mei_schedule_stall_timer(dev); + + return 0; +} + +/** + * mei_cl_irq_disconnect - processes close related operation from + * interrupt thread context - send disconnect request + * + * @cl: client + * @cb: callback block. + * @cmpl_list: complete list. + * + * Return: 0, OK; otherwise, error. + */ +int mei_cl_irq_disconnect(struct mei_cl *cl, struct mei_cl_cb *cb, + struct list_head *cmpl_list) +{ + struct mei_device *dev = cl->dev; + u32 msg_slots; + int slots; + int ret; + + msg_slots = mei_hbm2slots(sizeof(struct hbm_client_connect_request)); + slots = mei_hbuf_empty_slots(dev); + if (slots < 0) + return -EOVERFLOW; + + if ((u32)slots < msg_slots) + return -EMSGSIZE; + + ret = mei_cl_send_disconnect(cl, cb); + if (ret) + list_move_tail(&cb->list, cmpl_list); + + return ret; +} + +/** + * __mei_cl_disconnect - disconnect host client from the me one + * internal function runtime pm has to be already acquired + * + * @cl: host client + * + * Return: 0 on success, <0 on failure. + */ +static int __mei_cl_disconnect(struct mei_cl *cl) +{ + struct mei_device *dev; + struct mei_cl_cb *cb; + int rets; + + dev = cl->dev; + + cl->state = MEI_FILE_DISCONNECTING; + + cb = mei_cl_enqueue_ctrl_wr_cb(cl, 0, MEI_FOP_DISCONNECT, NULL); + if (!cb) { + rets = -ENOMEM; + goto out; + } + + if (mei_hbuf_acquire(dev)) { + rets = mei_cl_send_disconnect(cl, cb); + if (rets) { + cl_err(dev, cl, "failed to disconnect.\n"); + goto out; + } + } + + mutex_unlock(&dev->device_lock); + wait_event_timeout(cl->wait, + cl->state == MEI_FILE_DISCONNECT_REPLY || + cl->state == MEI_FILE_DISCONNECTED, + dev->timeouts.cl_connect); + mutex_lock(&dev->device_lock); + + rets = cl->status; + if (cl->state != MEI_FILE_DISCONNECT_REPLY && + cl->state != MEI_FILE_DISCONNECTED) { + cl_dbg(dev, cl, "timeout on disconnect from FW client.\n"); + rets = -ETIME; + } + +out: + /* we disconnect also on error */ + mei_cl_set_disconnected(cl); + if (!rets) + cl_dbg(dev, cl, "successfully disconnected from FW client.\n"); + + mei_io_cb_free(cb); + return rets; +} + +/** + * mei_cl_disconnect - disconnect host client from the me one + * + * @cl: host client + * + * Locking: called under "dev->device_lock" lock + * + * Return: 0 on success, <0 on failure. + */ +int mei_cl_disconnect(struct mei_cl *cl) +{ + struct mei_device *dev; + int rets; + + if (WARN_ON(!cl || !cl->dev)) + return -ENODEV; + + dev = cl->dev; + + cl_dbg(dev, cl, "disconnecting"); + + if (!mei_cl_is_connected(cl)) + return 0; + + if (mei_cl_is_fixed_address(cl)) { + mei_cl_set_disconnected(cl); + return 0; + } + + if (dev->dev_state == MEI_DEV_POWERING_DOWN || + dev->dev_state == MEI_DEV_POWER_DOWN) { + cl_dbg(dev, cl, "Device is powering down, don't bother with disconnection\n"); + mei_cl_set_disconnected(cl); + return 0; + } + + rets = pm_runtime_get(dev->dev); + if (rets < 0 && rets != -EINPROGRESS) { + pm_runtime_put_noidle(dev->dev); + cl_err(dev, cl, "rpm: get failed %d\n", rets); + return rets; + } + + rets = __mei_cl_disconnect(cl); + + cl_dbg(dev, cl, "rpm: autosuspend\n"); + pm_runtime_mark_last_busy(dev->dev); + pm_runtime_put_autosuspend(dev->dev); + + return rets; +} + + +/** + * mei_cl_is_other_connecting - checks if other + * client with the same me client id is connecting + * + * @cl: private data of the file object + * + * Return: true if other client is connected, false - otherwise. + */ +static bool mei_cl_is_other_connecting(struct mei_cl *cl) +{ + struct mei_device *dev; + struct mei_cl_cb *cb; + + dev = cl->dev; + + list_for_each_entry(cb, &dev->ctrl_rd_list, list) { + if (cb->fop_type == MEI_FOP_CONNECT && + mei_cl_me_id(cl) == mei_cl_me_id(cb->cl)) + return true; + } + + return false; +} + +/** + * mei_cl_send_connect - send connect request + * + * @cl: host client + * @cb: callback block + * + * Return: 0, OK; otherwise, error. + */ +static int mei_cl_send_connect(struct mei_cl *cl, struct mei_cl_cb *cb) +{ + struct mei_device *dev; + int ret; + + dev = cl->dev; + + ret = mei_hbm_cl_connect_req(dev, cl); + cl->status = ret; + if (ret) { + cl->state = MEI_FILE_DISCONNECT_REPLY; + return ret; + } + + list_move_tail(&cb->list, &dev->ctrl_rd_list); + cl->timer_count = dev->timeouts.connect; + mei_schedule_stall_timer(dev); + return 0; +} + +/** + * mei_cl_irq_connect - send connect request in irq_thread context + * + * @cl: host client + * @cb: callback block + * @cmpl_list: complete list + * + * Return: 0, OK; otherwise, error. + */ +int mei_cl_irq_connect(struct mei_cl *cl, struct mei_cl_cb *cb, + struct list_head *cmpl_list) +{ + struct mei_device *dev = cl->dev; + u32 msg_slots; + int slots; + int rets; + + if (mei_cl_is_other_connecting(cl)) + return 0; + + msg_slots = mei_hbm2slots(sizeof(struct hbm_client_connect_request)); + slots = mei_hbuf_empty_slots(dev); + if (slots < 0) + return -EOVERFLOW; + + if ((u32)slots < msg_slots) + return -EMSGSIZE; + + rets = mei_cl_send_connect(cl, cb); + if (rets) + list_move_tail(&cb->list, cmpl_list); + + return rets; +} + +/** + * mei_cl_connect - connect host client to the me one + * + * @cl: host client + * @me_cl: me client + * @fp: pointer to file structure + * + * Locking: called under "dev->device_lock" lock + * + * Return: 0 on success, <0 on failure. + */ +int mei_cl_connect(struct mei_cl *cl, struct mei_me_client *me_cl, + const struct file *fp) +{ + struct mei_device *dev; + struct mei_cl_cb *cb; + int rets; + + if (WARN_ON(!cl || !cl->dev || !me_cl)) + return -ENODEV; + + dev = cl->dev; + + rets = mei_cl_set_connecting(cl, me_cl); + if (rets) + goto nortpm; + + if (mei_cl_is_fixed_address(cl)) { + cl->state = MEI_FILE_CONNECTED; + rets = 0; + goto nortpm; + } + + rets = pm_runtime_get(dev->dev); + if (rets < 0 && rets != -EINPROGRESS) { + pm_runtime_put_noidle(dev->dev); + cl_err(dev, cl, "rpm: get failed %d\n", rets); + goto nortpm; + } + + cb = mei_cl_enqueue_ctrl_wr_cb(cl, 0, MEI_FOP_CONNECT, fp); + if (!cb) { + rets = -ENOMEM; + goto out; + } + + /* run hbuf acquire last so we don't have to undo */ + if (!mei_cl_is_other_connecting(cl) && mei_hbuf_acquire(dev)) { + rets = mei_cl_send_connect(cl, cb); + if (rets) + goto out; + } + + mutex_unlock(&dev->device_lock); + wait_event_timeout(cl->wait, + (cl->state == MEI_FILE_CONNECTED || + cl->state == MEI_FILE_DISCONNECTED || + cl->state == MEI_FILE_DISCONNECT_REQUIRED || + cl->state == MEI_FILE_DISCONNECT_REPLY), + dev->timeouts.cl_connect); + mutex_lock(&dev->device_lock); + + if (!mei_cl_is_connected(cl)) { + if (cl->state == MEI_FILE_DISCONNECT_REQUIRED) { + mei_io_list_flush_cl(&dev->ctrl_rd_list, cl); + mei_io_list_flush_cl(&dev->ctrl_wr_list, cl); + /* ignore disconnect return valuue; + * in case of failure reset will be invoked + */ + __mei_cl_disconnect(cl); + rets = -EFAULT; + goto out; + } + + /* timeout or something went really wrong */ + if (!cl->status) + cl->status = -EFAULT; + } + + rets = cl->status; +out: + cl_dbg(dev, cl, "rpm: autosuspend\n"); + pm_runtime_mark_last_busy(dev->dev); + pm_runtime_put_autosuspend(dev->dev); + + mei_io_cb_free(cb); + +nortpm: + if (!mei_cl_is_connected(cl)) + mei_cl_set_disconnected(cl); + + return rets; +} + +/** + * mei_cl_alloc_linked - allocate and link host client + * + * @dev: the device structure + * + * Return: cl on success ERR_PTR on failure + */ +struct mei_cl *mei_cl_alloc_linked(struct mei_device *dev) +{ + struct mei_cl *cl; + int ret; + + cl = mei_cl_allocate(dev); + if (!cl) { + ret = -ENOMEM; + goto err; + } + + ret = mei_cl_link(cl); + if (ret) + goto err; + + return cl; +err: + kfree(cl); + return ERR_PTR(ret); +} + +/** + * mei_cl_tx_flow_ctrl_creds - checks flow_control credits for cl. + * + * @cl: host client + * + * Return: 1 if tx_flow_ctrl_creds >0, 0 - otherwise. + */ +static int mei_cl_tx_flow_ctrl_creds(struct mei_cl *cl) +{ + if (WARN_ON(!cl || !cl->me_cl)) + return -EINVAL; + + if (cl->tx_flow_ctrl_creds > 0) + return 1; + + if (mei_cl_is_fixed_address(cl)) + return 1; + + if (mei_cl_is_single_recv_buf(cl)) { + if (cl->me_cl->tx_flow_ctrl_creds > 0) + return 1; + } + return 0; +} + +/** + * mei_cl_tx_flow_ctrl_creds_reduce - reduces transmit flow control credits + * for a client + * + * @cl: host client + * + * Return: + * 0 on success + * -EINVAL when ctrl credits are <= 0 + */ +static int mei_cl_tx_flow_ctrl_creds_reduce(struct mei_cl *cl) +{ + if (WARN_ON(!cl || !cl->me_cl)) + return -EINVAL; + + if (mei_cl_is_fixed_address(cl)) + return 0; + + if (mei_cl_is_single_recv_buf(cl)) { + if (WARN_ON(cl->me_cl->tx_flow_ctrl_creds <= 0)) + return -EINVAL; + cl->me_cl->tx_flow_ctrl_creds--; + } else { + if (WARN_ON(cl->tx_flow_ctrl_creds <= 0)) + return -EINVAL; + cl->tx_flow_ctrl_creds--; + } + return 0; +} + +/** + * mei_cl_vtag_alloc - allocate and fill the vtag structure + * + * @fp: pointer to file structure + * @vtag: vm tag + * + * Return: + * * Pointer to allocated struct - on success + * * ERR_PTR(-ENOMEM) on memory allocation failure + */ +struct mei_cl_vtag *mei_cl_vtag_alloc(struct file *fp, u8 vtag) +{ + struct mei_cl_vtag *cl_vtag; + + cl_vtag = kzalloc(sizeof(*cl_vtag), GFP_KERNEL); + if (!cl_vtag) + return ERR_PTR(-ENOMEM); + + INIT_LIST_HEAD(&cl_vtag->list); + cl_vtag->vtag = vtag; + cl_vtag->fp = fp; + + return cl_vtag; +} + +/** + * mei_cl_fp_by_vtag - obtain the file pointer by vtag + * + * @cl: host client + * @vtag: virtual tag + * + * Return: + * * A file pointer - on success + * * ERR_PTR(-ENOENT) if vtag is not found in the client vtag list + */ +const struct file *mei_cl_fp_by_vtag(const struct mei_cl *cl, u8 vtag) +{ + struct mei_cl_vtag *vtag_l; + + list_for_each_entry(vtag_l, &cl->vtag_map, list) + /* The client on bus has one fixed fp */ + if ((cl->cldev && mei_cldev_enabled(cl->cldev)) || + vtag_l->vtag == vtag) + return vtag_l->fp; + + return ERR_PTR(-ENOENT); +} + +/** + * mei_cl_reset_read_by_vtag - reset pending_read flag by given vtag + * + * @cl: host client + * @vtag: vm tag + */ +static void mei_cl_reset_read_by_vtag(const struct mei_cl *cl, u8 vtag) +{ + struct mei_cl_vtag *vtag_l; + + list_for_each_entry(vtag_l, &cl->vtag_map, list) { + /* The client on bus has one fixed vtag map */ + if ((cl->cldev && mei_cldev_enabled(cl->cldev)) || + vtag_l->vtag == vtag) { + vtag_l->pending_read = false; + break; + } + } +} + +/** + * mei_cl_read_vtag_add_fc - add flow control for next pending reader + * in the vtag list + * + * @cl: host client + */ +static void mei_cl_read_vtag_add_fc(struct mei_cl *cl) +{ + struct mei_cl_vtag *cl_vtag; + + list_for_each_entry(cl_vtag, &cl->vtag_map, list) { + if (cl_vtag->pending_read) { + if (mei_cl_enqueue_ctrl_wr_cb(cl, + mei_cl_mtu(cl), + MEI_FOP_READ, + cl_vtag->fp)) + cl->rx_flow_ctrl_creds++; + break; + } + } +} + +/** + * mei_cl_vt_support_check - check if client support vtags + * + * @cl: host client + * + * Return: + * * 0 - supported, or not connected at all + * * -EOPNOTSUPP - vtags are not supported by client + */ +int mei_cl_vt_support_check(const struct mei_cl *cl) +{ + struct mei_device *dev = cl->dev; + + if (!dev->hbm_f_vt_supported) + return -EOPNOTSUPP; + + if (!cl->me_cl) + return 0; + + return cl->me_cl->props.vt_supported ? 0 : -EOPNOTSUPP; +} + +/** + * mei_cl_add_rd_completed - add read completed callback to list with lock + * and vtag check + * + * @cl: host client + * @cb: callback block + * + */ +void mei_cl_add_rd_completed(struct mei_cl *cl, struct mei_cl_cb *cb) +{ + const struct file *fp; + + if (!mei_cl_vt_support_check(cl)) { + fp = mei_cl_fp_by_vtag(cl, cb->vtag); + if (IS_ERR(fp)) { + /* client already disconnected, discarding */ + mei_io_cb_free(cb); + return; + } + cb->fp = fp; + mei_cl_reset_read_by_vtag(cl, cb->vtag); + mei_cl_read_vtag_add_fc(cl); + } + + spin_lock(&cl->rd_completed_lock); + list_add_tail(&cb->list, &cl->rd_completed); + spin_unlock(&cl->rd_completed_lock); +} + +/** + * mei_cl_del_rd_completed - free read completed callback with lock + * + * @cl: host client + * @cb: callback block + * + */ +void mei_cl_del_rd_completed(struct mei_cl *cl, struct mei_cl_cb *cb) +{ + spin_lock(&cl->rd_completed_lock); + mei_io_cb_free(cb); + spin_unlock(&cl->rd_completed_lock); +} + +/** + * mei_cl_notify_fop2req - convert fop to proper request + * + * @fop: client notification start response command + * + * Return: MEI_HBM_NOTIFICATION_START/STOP + */ +u8 mei_cl_notify_fop2req(enum mei_cb_file_ops fop) +{ + if (fop == MEI_FOP_NOTIFY_START) + return MEI_HBM_NOTIFICATION_START; + else + return MEI_HBM_NOTIFICATION_STOP; +} + +/** + * mei_cl_notify_req2fop - convert notification request top file operation type + * + * @req: hbm notification request type + * + * Return: MEI_FOP_NOTIFY_START/STOP + */ +enum mei_cb_file_ops mei_cl_notify_req2fop(u8 req) +{ + if (req == MEI_HBM_NOTIFICATION_START) + return MEI_FOP_NOTIFY_START; + else + return MEI_FOP_NOTIFY_STOP; +} + +/** + * mei_cl_irq_notify - send notification request in irq_thread context + * + * @cl: client + * @cb: callback block. + * @cmpl_list: complete list. + * + * Return: 0 on such and error otherwise. + */ +int mei_cl_irq_notify(struct mei_cl *cl, struct mei_cl_cb *cb, + struct list_head *cmpl_list) +{ + struct mei_device *dev = cl->dev; + u32 msg_slots; + int slots; + int ret; + bool request; + + msg_slots = mei_hbm2slots(sizeof(struct hbm_client_connect_request)); + slots = mei_hbuf_empty_slots(dev); + if (slots < 0) + return -EOVERFLOW; + + if ((u32)slots < msg_slots) + return -EMSGSIZE; + + request = mei_cl_notify_fop2req(cb->fop_type); + ret = mei_hbm_cl_notify_req(dev, cl, request); + if (ret) { + cl->status = ret; + list_move_tail(&cb->list, cmpl_list); + return ret; + } + + list_move_tail(&cb->list, &dev->ctrl_rd_list); + return 0; +} + +/** + * mei_cl_notify_request - send notification stop/start request + * + * @cl: host client + * @fp: associate request with file + * @request: 1 for start or 0 for stop + * + * Locking: called under "dev->device_lock" lock + * + * Return: 0 on such and error otherwise. + */ +int mei_cl_notify_request(struct mei_cl *cl, + const struct file *fp, u8 request) +{ + struct mei_device *dev; + struct mei_cl_cb *cb; + enum mei_cb_file_ops fop_type; + int rets; + + if (WARN_ON(!cl || !cl->dev)) + return -ENODEV; + + dev = cl->dev; + + if (!dev->hbm_f_ev_supported) { + cl_dbg(dev, cl, "notifications not supported\n"); + return -EOPNOTSUPP; + } + + if (!mei_cl_is_connected(cl)) + return -ENODEV; + + rets = pm_runtime_get(dev->dev); + if (rets < 0 && rets != -EINPROGRESS) { + pm_runtime_put_noidle(dev->dev); + cl_err(dev, cl, "rpm: get failed %d\n", rets); + return rets; + } + + fop_type = mei_cl_notify_req2fop(request); + cb = mei_cl_enqueue_ctrl_wr_cb(cl, 0, fop_type, fp); + if (!cb) { + rets = -ENOMEM; + goto out; + } + + if (mei_hbuf_acquire(dev)) { + if (mei_hbm_cl_notify_req(dev, cl, request)) { + rets = -ENODEV; + goto out; + } + list_move_tail(&cb->list, &dev->ctrl_rd_list); + } + + mutex_unlock(&dev->device_lock); + wait_event_timeout(cl->wait, + cl->notify_en == request || + cl->status || + !mei_cl_is_connected(cl), + dev->timeouts.cl_connect); + mutex_lock(&dev->device_lock); + + if (cl->notify_en != request && !cl->status) + cl->status = -EFAULT; + + rets = cl->status; + +out: + cl_dbg(dev, cl, "rpm: autosuspend\n"); + pm_runtime_mark_last_busy(dev->dev); + pm_runtime_put_autosuspend(dev->dev); + + mei_io_cb_free(cb); + return rets; +} + +/** + * mei_cl_notify - raise notification + * + * @cl: host client + * + * Locking: called under "dev->device_lock" lock + */ +void mei_cl_notify(struct mei_cl *cl) +{ + struct mei_device *dev; + + if (!cl || !cl->dev) + return; + + dev = cl->dev; + + if (!cl->notify_en) + return; + + cl_dbg(dev, cl, "notify event"); + cl->notify_ev = true; + if (!mei_cl_bus_notify_event(cl)) + wake_up_interruptible(&cl->ev_wait); + + if (cl->ev_async) + kill_fasync(&cl->ev_async, SIGIO, POLL_PRI); + +} + +/** + * mei_cl_notify_get - get or wait for notification event + * + * @cl: host client + * @block: this request is blocking + * @notify_ev: true if notification event was received + * + * Locking: called under "dev->device_lock" lock + * + * Return: 0 on such and error otherwise. + */ +int mei_cl_notify_get(struct mei_cl *cl, bool block, bool *notify_ev) +{ + struct mei_device *dev; + int rets; + + *notify_ev = false; + + if (WARN_ON(!cl || !cl->dev)) + return -ENODEV; + + dev = cl->dev; + + if (!dev->hbm_f_ev_supported) { + cl_dbg(dev, cl, "notifications not supported\n"); + return -EOPNOTSUPP; + } + + if (!mei_cl_is_connected(cl)) + return -ENODEV; + + if (cl->notify_ev) + goto out; + + if (!block) + return -EAGAIN; + + mutex_unlock(&dev->device_lock); + rets = wait_event_interruptible(cl->ev_wait, cl->notify_ev); + mutex_lock(&dev->device_lock); + + if (rets < 0) + return rets; + +out: + *notify_ev = cl->notify_ev; + cl->notify_ev = false; + return 0; +} + +/** + * mei_cl_read_start - the start read client message function. + * + * @cl: host client + * @length: number of bytes to read + * @fp: pointer to file structure + * + * Return: 0 on success, <0 on failure. + */ +int mei_cl_read_start(struct mei_cl *cl, size_t length, const struct file *fp) +{ + struct mei_device *dev; + struct mei_cl_cb *cb; + int rets; + + if (WARN_ON(!cl || !cl->dev)) + return -ENODEV; + + dev = cl->dev; + + if (!mei_cl_is_connected(cl)) + return -ENODEV; + + if (!mei_me_cl_is_active(cl->me_cl)) { + cl_err(dev, cl, "no such me client\n"); + return -ENOTTY; + } + + if (mei_cl_is_fixed_address(cl)) + return 0; + + /* HW currently supports only one pending read */ + if (cl->rx_flow_ctrl_creds) { + mei_cl_set_read_by_fp(cl, fp); + return -EBUSY; + } + + cb = mei_cl_enqueue_ctrl_wr_cb(cl, length, MEI_FOP_READ, fp); + if (!cb) + return -ENOMEM; + + mei_cl_set_read_by_fp(cl, fp); + + rets = pm_runtime_get(dev->dev); + if (rets < 0 && rets != -EINPROGRESS) { + pm_runtime_put_noidle(dev->dev); + cl_err(dev, cl, "rpm: get failed %d\n", rets); + goto nortpm; + } + + rets = 0; + if (mei_hbuf_acquire(dev)) { + rets = mei_hbm_cl_flow_control_req(dev, cl); + if (rets < 0) + goto out; + + list_move_tail(&cb->list, &cl->rd_pending); + } + cl->rx_flow_ctrl_creds++; + +out: + cl_dbg(dev, cl, "rpm: autosuspend\n"); + pm_runtime_mark_last_busy(dev->dev); + pm_runtime_put_autosuspend(dev->dev); +nortpm: + if (rets) + mei_io_cb_free(cb); + + return rets; +} + +static inline u8 mei_ext_hdr_set_vtag(void *ext, u8 vtag) +{ + struct mei_ext_hdr_vtag *vtag_hdr = ext; + + vtag_hdr->hdr.type = MEI_EXT_HDR_VTAG; + vtag_hdr->hdr.length = mei_data2slots(sizeof(*vtag_hdr)); + vtag_hdr->vtag = vtag; + vtag_hdr->reserved = 0; + return vtag_hdr->hdr.length; +} + +static inline bool mei_ext_hdr_is_gsc(struct mei_ext_hdr *ext) +{ + return ext && ext->type == MEI_EXT_HDR_GSC; +} + +static inline u8 mei_ext_hdr_set_gsc(struct mei_ext_hdr *ext, struct mei_ext_hdr *gsc_hdr) +{ + memcpy(ext, gsc_hdr, mei_ext_hdr_len(gsc_hdr)); + return ext->length; +} + +/** + * mei_msg_hdr_init - allocate and initialize mei message header + * + * @cb: message callback structure + * + * Return: a pointer to initialized header or ERR_PTR on failure + */ +static struct mei_msg_hdr *mei_msg_hdr_init(const struct mei_cl_cb *cb) +{ + size_t hdr_len; + struct mei_ext_meta_hdr *meta; + struct mei_msg_hdr *mei_hdr; + bool is_ext, is_hbm, is_gsc, is_vtag; + struct mei_ext_hdr *next_ext; + + if (!cb) + return ERR_PTR(-EINVAL); + + /* Extended header for vtag is attached only on the first fragment */ + is_vtag = (cb->vtag && cb->buf_idx == 0); + is_hbm = cb->cl->me_cl->client_id == 0; + is_gsc = ((!is_hbm) && cb->cl->dev->hbm_f_gsc_supported && mei_ext_hdr_is_gsc(cb->ext_hdr)); + is_ext = is_vtag || is_gsc; + + /* Compute extended header size */ + hdr_len = sizeof(*mei_hdr); + + if (!is_ext) + goto setup_hdr; + + hdr_len += sizeof(*meta); + if (is_vtag) + hdr_len += sizeof(struct mei_ext_hdr_vtag); + + if (is_gsc) + hdr_len += mei_ext_hdr_len(cb->ext_hdr); + +setup_hdr: + mei_hdr = kzalloc(hdr_len, GFP_KERNEL); + if (!mei_hdr) + return ERR_PTR(-ENOMEM); + + mei_hdr->host_addr = mei_cl_host_addr(cb->cl); + mei_hdr->me_addr = mei_cl_me_id(cb->cl); + mei_hdr->internal = cb->internal; + mei_hdr->extended = is_ext; + + if (!is_ext) + goto out; + + meta = (struct mei_ext_meta_hdr *)mei_hdr->extension; + meta->size = 0; + next_ext = (struct mei_ext_hdr *)meta->hdrs; + if (is_vtag) { + meta->count++; + meta->size += mei_ext_hdr_set_vtag(next_ext, cb->vtag); + next_ext = mei_ext_next(next_ext); + } + + if (is_gsc) { + meta->count++; + meta->size += mei_ext_hdr_set_gsc(next_ext, cb->ext_hdr); + next_ext = mei_ext_next(next_ext); + } + +out: + mei_hdr->length = hdr_len - sizeof(*mei_hdr); + return mei_hdr; +} + +/** + * mei_cl_irq_write - write a message to device + * from the interrupt thread context + * + * @cl: client + * @cb: callback block. + * @cmpl_list: complete list. + * + * Return: 0, OK; otherwise error. + */ +int mei_cl_irq_write(struct mei_cl *cl, struct mei_cl_cb *cb, + struct list_head *cmpl_list) +{ + struct mei_device *dev; + struct mei_msg_data *buf; + struct mei_msg_hdr *mei_hdr = NULL; + size_t hdr_len; + size_t hbuf_len, dr_len; + size_t buf_len = 0; + size_t data_len; + int hbuf_slots; + u32 dr_slots; + u32 dma_len; + int rets; + bool first_chunk; + const void *data = NULL; + + if (WARN_ON(!cl || !cl->dev)) + return -ENODEV; + + dev = cl->dev; + + buf = &cb->buf; + + first_chunk = cb->buf_idx == 0; + + rets = first_chunk ? mei_cl_tx_flow_ctrl_creds(cl) : 1; + if (rets < 0) + goto err; + + if (rets == 0) { + cl_dbg(dev, cl, "No flow control credentials: not sending.\n"); + return 0; + } + + if (buf->data) { + buf_len = buf->size - cb->buf_idx; + data = buf->data + cb->buf_idx; + } + hbuf_slots = mei_hbuf_empty_slots(dev); + if (hbuf_slots < 0) { + rets = -EOVERFLOW; + goto err; + } + + hbuf_len = mei_slots2data(hbuf_slots) & MEI_MSG_MAX_LEN_MASK; + dr_slots = mei_dma_ring_empty_slots(dev); + dr_len = mei_slots2data(dr_slots); + + mei_hdr = mei_msg_hdr_init(cb); + if (IS_ERR(mei_hdr)) { + rets = PTR_ERR(mei_hdr); + mei_hdr = NULL; + goto err; + } + + hdr_len = sizeof(*mei_hdr) + mei_hdr->length; + + /** + * Split the message only if we can write the whole host buffer + * otherwise wait for next time the host buffer is empty. + */ + if (hdr_len + buf_len <= hbuf_len) { + data_len = buf_len; + mei_hdr->msg_complete = 1; + } else if (dr_slots && hbuf_len >= hdr_len + sizeof(dma_len)) { + mei_hdr->dma_ring = 1; + if (buf_len > dr_len) + buf_len = dr_len; + else + mei_hdr->msg_complete = 1; + + data_len = sizeof(dma_len); + dma_len = buf_len; + data = &dma_len; + } else if ((u32)hbuf_slots == mei_hbuf_depth(dev)) { + buf_len = hbuf_len - hdr_len; + data_len = buf_len; + } else { + kfree(mei_hdr); + return 0; + } + mei_hdr->length += data_len; + + if (mei_hdr->dma_ring && buf->data) + mei_dma_ring_write(dev, buf->data + cb->buf_idx, buf_len); + rets = mei_write_message(dev, mei_hdr, hdr_len, data, data_len); + + if (rets) + goto err; + + cl->status = 0; + cl->writing_state = MEI_WRITING; + cb->buf_idx += buf_len; + + if (first_chunk) { + if (mei_cl_tx_flow_ctrl_creds_reduce(cl)) { + rets = -EIO; + goto err; + } + } + + if (mei_hdr->msg_complete) + list_move_tail(&cb->list, &dev->write_waiting_list); + + kfree(mei_hdr); + return 0; + +err: + kfree(mei_hdr); + cl->status = rets; + list_move_tail(&cb->list, cmpl_list); + return rets; +} + +/** + * mei_cl_write - submit a write cb to mei device + * assumes device_lock is locked + * + * @cl: host client + * @cb: write callback with filled data + * @timeout: send timeout in milliseconds. + * effective only for blocking writes: the cb->blocking is set. + * set timeout to the MAX_SCHEDULE_TIMEOUT to maixum allowed wait. + * + * Return: number of bytes sent on success, <0 on failure. + */ +ssize_t mei_cl_write(struct mei_cl *cl, struct mei_cl_cb *cb, unsigned long timeout) +{ + struct mei_device *dev; + struct mei_msg_data *buf; + struct mei_msg_hdr *mei_hdr = NULL; + size_t hdr_len; + size_t hbuf_len, dr_len; + size_t buf_len; + size_t data_len; + int hbuf_slots; + u32 dr_slots; + u32 dma_len; + ssize_t rets; + bool blocking; + const void *data; + + if (WARN_ON(!cl || !cl->dev)) + return -ENODEV; + + if (WARN_ON(!cb)) + return -EINVAL; + + dev = cl->dev; + + buf = &cb->buf; + buf_len = buf->size; + + cl_dbg(dev, cl, "buf_len=%zd\n", buf_len); + + blocking = cb->blocking; + data = buf->data; + + rets = pm_runtime_get(dev->dev); + if (rets < 0 && rets != -EINPROGRESS) { + pm_runtime_put_noidle(dev->dev); + cl_err(dev, cl, "rpm: get failed %zd\n", rets); + goto free; + } + + cb->buf_idx = 0; + cl->writing_state = MEI_IDLE; + + + rets = mei_cl_tx_flow_ctrl_creds(cl); + if (rets < 0) + goto err; + + mei_hdr = mei_msg_hdr_init(cb); + if (IS_ERR(mei_hdr)) { + rets = PTR_ERR(mei_hdr); + mei_hdr = NULL; + goto err; + } + + hdr_len = sizeof(*mei_hdr) + mei_hdr->length; + + if (rets == 0) { + cl_dbg(dev, cl, "No flow control credentials: not sending.\n"); + rets = buf_len; + goto out; + } + + if (!mei_hbuf_acquire(dev)) { + cl_dbg(dev, cl, "Cannot acquire the host buffer: not sending.\n"); + rets = buf_len; + goto out; + } + + hbuf_slots = mei_hbuf_empty_slots(dev); + if (hbuf_slots < 0) { + buf_len = -EOVERFLOW; + goto out; + } + + hbuf_len = mei_slots2data(hbuf_slots) & MEI_MSG_MAX_LEN_MASK; + dr_slots = mei_dma_ring_empty_slots(dev); + dr_len = mei_slots2data(dr_slots); + + if (hdr_len + buf_len <= hbuf_len) { + data_len = buf_len; + mei_hdr->msg_complete = 1; + } else if (dr_slots && hbuf_len >= hdr_len + sizeof(dma_len)) { + mei_hdr->dma_ring = 1; + if (buf_len > dr_len) + buf_len = dr_len; + else + mei_hdr->msg_complete = 1; + + data_len = sizeof(dma_len); + dma_len = buf_len; + data = &dma_len; + } else { + buf_len = hbuf_len - hdr_len; + data_len = buf_len; + } + + mei_hdr->length += data_len; + + if (mei_hdr->dma_ring && buf->data) + mei_dma_ring_write(dev, buf->data, buf_len); + rets = mei_write_message(dev, mei_hdr, hdr_len, data, data_len); + + if (rets) + goto err; + + rets = mei_cl_tx_flow_ctrl_creds_reduce(cl); + if (rets) + goto err; + + cl->writing_state = MEI_WRITING; + cb->buf_idx = buf_len; + /* restore return value */ + buf_len = buf->size; + +out: + if (mei_hdr->msg_complete) + mei_tx_cb_enqueue(cb, &dev->write_waiting_list); + else + mei_tx_cb_enqueue(cb, &dev->write_list); + + cb = NULL; + if (blocking && cl->writing_state != MEI_WRITE_COMPLETE) { + + mutex_unlock(&dev->device_lock); + rets = wait_event_interruptible_timeout(cl->tx_wait, + cl->writing_state == MEI_WRITE_COMPLETE || + (!mei_cl_is_connected(cl)), + msecs_to_jiffies(timeout)); + mutex_lock(&dev->device_lock); + /* clean all queue on timeout as something fatal happened */ + if (rets == 0) { + rets = -ETIME; + mei_io_tx_list_free_cl(&dev->write_list, cl, NULL); + mei_io_tx_list_free_cl(&dev->write_waiting_list, cl, NULL); + } + /* wait_event_interruptible returns -ERESTARTSYS */ + if (rets > 0) + rets = 0; + if (rets) { + if (signal_pending(current)) + rets = -EINTR; + goto err; + } + if (cl->writing_state != MEI_WRITE_COMPLETE) { + rets = -EFAULT; + goto err; + } + } + + rets = buf_len; +err: + cl_dbg(dev, cl, "rpm: autosuspend\n"); + pm_runtime_mark_last_busy(dev->dev); + pm_runtime_put_autosuspend(dev->dev); +free: + mei_io_cb_free(cb); + + kfree(mei_hdr); + + return rets; +} + +/** + * mei_cl_complete - processes completed operation for a client + * + * @cl: private data of the file object. + * @cb: callback block. + */ +void mei_cl_complete(struct mei_cl *cl, struct mei_cl_cb *cb) +{ + struct mei_device *dev = cl->dev; + + switch (cb->fop_type) { + case MEI_FOP_WRITE: + mei_tx_cb_dequeue(cb); + cl->writing_state = MEI_WRITE_COMPLETE; + if (waitqueue_active(&cl->tx_wait)) { + wake_up_interruptible(&cl->tx_wait); + } else { + pm_runtime_mark_last_busy(dev->dev); + pm_request_autosuspend(dev->dev); + } + break; + + case MEI_FOP_READ: + mei_cl_add_rd_completed(cl, cb); + if (!mei_cl_is_fixed_address(cl) && + !WARN_ON(!cl->rx_flow_ctrl_creds)) + cl->rx_flow_ctrl_creds--; + if (!mei_cl_bus_rx_event(cl)) + wake_up_interruptible(&cl->rx_wait); + break; + + case MEI_FOP_CONNECT: + case MEI_FOP_DISCONNECT: + case MEI_FOP_NOTIFY_STOP: + case MEI_FOP_NOTIFY_START: + case MEI_FOP_DMA_MAP: + case MEI_FOP_DMA_UNMAP: + if (waitqueue_active(&cl->wait)) + wake_up(&cl->wait); + + break; + case MEI_FOP_DISCONNECT_RSP: + mei_io_cb_free(cb); + mei_cl_set_disconnected(cl); + break; + default: + BUG_ON(0); + } +} + + +/** + * mei_cl_all_disconnect - disconnect forcefully all connected clients + * + * @dev: mei device + */ +void mei_cl_all_disconnect(struct mei_device *dev) +{ + struct mei_cl *cl; + + list_for_each_entry(cl, &dev->file_list, link) + mei_cl_set_disconnected(cl); +} +EXPORT_SYMBOL_GPL(mei_cl_all_disconnect); + +static struct mei_cl *mei_cl_dma_map_find(struct mei_device *dev, u8 buffer_id) +{ + struct mei_cl *cl; + + list_for_each_entry(cl, &dev->file_list, link) + if (cl->dma.buffer_id == buffer_id) + return cl; + return NULL; +} + +/** + * mei_cl_irq_dma_map - send client dma map request in irq_thread context + * + * @cl: client + * @cb: callback block. + * @cmpl_list: complete list. + * + * Return: 0 on such and error otherwise. + */ +int mei_cl_irq_dma_map(struct mei_cl *cl, struct mei_cl_cb *cb, + struct list_head *cmpl_list) +{ + struct mei_device *dev = cl->dev; + u32 msg_slots; + int slots; + int ret; + + msg_slots = mei_hbm2slots(sizeof(struct hbm_client_dma_map_request)); + slots = mei_hbuf_empty_slots(dev); + if (slots < 0) + return -EOVERFLOW; + + if ((u32)slots < msg_slots) + return -EMSGSIZE; + + ret = mei_hbm_cl_dma_map_req(dev, cl); + if (ret) { + cl->status = ret; + list_move_tail(&cb->list, cmpl_list); + return ret; + } + + list_move_tail(&cb->list, &dev->ctrl_rd_list); + return 0; +} + +/** + * mei_cl_irq_dma_unmap - send client dma unmap request in irq_thread context + * + * @cl: client + * @cb: callback block. + * @cmpl_list: complete list. + * + * Return: 0 on such and error otherwise. + */ +int mei_cl_irq_dma_unmap(struct mei_cl *cl, struct mei_cl_cb *cb, + struct list_head *cmpl_list) +{ + struct mei_device *dev = cl->dev; + u32 msg_slots; + int slots; + int ret; + + msg_slots = mei_hbm2slots(sizeof(struct hbm_client_dma_unmap_request)); + slots = mei_hbuf_empty_slots(dev); + if (slots < 0) + return -EOVERFLOW; + + if ((u32)slots < msg_slots) + return -EMSGSIZE; + + ret = mei_hbm_cl_dma_unmap_req(dev, cl); + if (ret) { + cl->status = ret; + list_move_tail(&cb->list, cmpl_list); + return ret; + } + + list_move_tail(&cb->list, &dev->ctrl_rd_list); + return 0; +} + +static int mei_cl_dma_alloc(struct mei_cl *cl, u8 buf_id, size_t size) +{ + cl->dma.vaddr = dmam_alloc_coherent(cl->dev->dev, size, + &cl->dma.daddr, GFP_KERNEL); + if (!cl->dma.vaddr) + return -ENOMEM; + + cl->dma.buffer_id = buf_id; + cl->dma.size = size; + + return 0; +} + +static void mei_cl_dma_free(struct mei_cl *cl) +{ + cl->dma.buffer_id = 0; + dmam_free_coherent(cl->dev->dev, + cl->dma.size, cl->dma.vaddr, cl->dma.daddr); + cl->dma.size = 0; + cl->dma.vaddr = NULL; + cl->dma.daddr = 0; +} + +/** + * mei_cl_dma_alloc_and_map - send client dma map request + * + * @cl: host client + * @fp: pointer to file structure + * @buffer_id: id of the mapped buffer + * @size: size of the buffer + * + * Locking: called under "dev->device_lock" lock + * + * Return: + * * -ENODEV + * * -EINVAL + * * -EOPNOTSUPP + * * -EPROTO + * * -ENOMEM; + */ +int mei_cl_dma_alloc_and_map(struct mei_cl *cl, const struct file *fp, + u8 buffer_id, size_t size) +{ + struct mei_device *dev; + struct mei_cl_cb *cb; + int rets; + + if (WARN_ON(!cl || !cl->dev)) + return -ENODEV; + + dev = cl->dev; + + if (!dev->hbm_f_cd_supported) { + cl_dbg(dev, cl, "client dma is not supported\n"); + return -EOPNOTSUPP; + } + + if (buffer_id == 0) + return -EINVAL; + + if (mei_cl_is_connected(cl)) + return -EPROTO; + + if (cl->dma_mapped) + return -EPROTO; + + if (mei_cl_dma_map_find(dev, buffer_id)) { + cl_dbg(dev, cl, "client dma with id %d is already allocated\n", + cl->dma.buffer_id); + return -EPROTO; + } + + rets = pm_runtime_get(dev->dev); + if (rets < 0 && rets != -EINPROGRESS) { + pm_runtime_put_noidle(dev->dev); + cl_err(dev, cl, "rpm: get failed %d\n", rets); + return rets; + } + + rets = mei_cl_dma_alloc(cl, buffer_id, size); + if (rets) { + pm_runtime_put_noidle(dev->dev); + return rets; + } + + cb = mei_cl_enqueue_ctrl_wr_cb(cl, 0, MEI_FOP_DMA_MAP, fp); + if (!cb) { + rets = -ENOMEM; + goto out; + } + + if (mei_hbuf_acquire(dev)) { + if (mei_hbm_cl_dma_map_req(dev, cl)) { + rets = -ENODEV; + goto out; + } + list_move_tail(&cb->list, &dev->ctrl_rd_list); + } + + cl->status = 0; + + mutex_unlock(&dev->device_lock); + wait_event_timeout(cl->wait, + cl->dma_mapped || cl->status, + dev->timeouts.cl_connect); + mutex_lock(&dev->device_lock); + + if (!cl->dma_mapped && !cl->status) + cl->status = -EFAULT; + + rets = cl->status; + +out: + if (rets) + mei_cl_dma_free(cl); + + cl_dbg(dev, cl, "rpm: autosuspend\n"); + pm_runtime_mark_last_busy(dev->dev); + pm_runtime_put_autosuspend(dev->dev); + + mei_io_cb_free(cb); + return rets; +} + +/** + * mei_cl_dma_unmap - send client dma unmap request + * + * @cl: host client + * @fp: pointer to file structure + * + * Locking: called under "dev->device_lock" lock + * + * Return: 0 on such and error otherwise. + */ +int mei_cl_dma_unmap(struct mei_cl *cl, const struct file *fp) +{ + struct mei_device *dev; + struct mei_cl_cb *cb; + int rets; + + if (WARN_ON(!cl || !cl->dev)) + return -ENODEV; + + dev = cl->dev; + + if (!dev->hbm_f_cd_supported) { + cl_dbg(dev, cl, "client dma is not supported\n"); + return -EOPNOTSUPP; + } + + /* do not allow unmap for connected client */ + if (mei_cl_is_connected(cl)) + return -EPROTO; + + if (!cl->dma_mapped) + return -EPROTO; + + rets = pm_runtime_get(dev->dev); + if (rets < 0 && rets != -EINPROGRESS) { + pm_runtime_put_noidle(dev->dev); + cl_err(dev, cl, "rpm: get failed %d\n", rets); + return rets; + } + + cb = mei_cl_enqueue_ctrl_wr_cb(cl, 0, MEI_FOP_DMA_UNMAP, fp); + if (!cb) { + rets = -ENOMEM; + goto out; + } + + if (mei_hbuf_acquire(dev)) { + if (mei_hbm_cl_dma_unmap_req(dev, cl)) { + rets = -ENODEV; + goto out; + } + list_move_tail(&cb->list, &dev->ctrl_rd_list); + } + + cl->status = 0; + + mutex_unlock(&dev->device_lock); + wait_event_timeout(cl->wait, + !cl->dma_mapped || cl->status, + dev->timeouts.cl_connect); + mutex_lock(&dev->device_lock); + + if (cl->dma_mapped && !cl->status) + cl->status = -EFAULT; + + rets = cl->status; + + if (!rets) + mei_cl_dma_free(cl); +out: + cl_dbg(dev, cl, "rpm: autosuspend\n"); + pm_runtime_mark_last_busy(dev->dev); + pm_runtime_put_autosuspend(dev->dev); + + mei_io_cb_free(cb); + return rets; +} diff --git a/drivers/misc/mei/client.h b/drivers/misc/mei/client.h new file mode 100644 index 0000000000..9052860bcf --- /dev/null +++ b/drivers/misc/mei/client.h @@ -0,0 +1,288 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (c) 2003-2018, Intel Corporation. All rights reserved. + * Intel Management Engine Interface (Intel MEI) Linux driver + */ + +#ifndef _MEI_CLIENT_H_ +#define _MEI_CLIENT_H_ + +#include <linux/types.h> +#include <linux/poll.h> +#include <linux/mei.h> + +#include "mei_dev.h" + +/* + * reference counting base function + */ +void mei_me_cl_init(struct mei_me_client *me_cl); +void mei_me_cl_put(struct mei_me_client *me_cl); +struct mei_me_client *mei_me_cl_get(struct mei_me_client *me_cl); + +void mei_me_cl_add(struct mei_device *dev, struct mei_me_client *me_cl); +void mei_me_cl_del(struct mei_device *dev, struct mei_me_client *me_cl); + +struct mei_me_client *mei_me_cl_by_uuid(struct mei_device *dev, + const uuid_le *uuid); +struct mei_me_client *mei_me_cl_by_id(struct mei_device *dev, u8 client_id); +struct mei_me_client *mei_me_cl_by_uuid_id(struct mei_device *dev, + const uuid_le *uuid, u8 client_id); +void mei_me_cl_rm_by_uuid(struct mei_device *dev, const uuid_le *uuid); +void mei_me_cl_rm_by_uuid_id(struct mei_device *dev, + const uuid_le *uuid, u8 id); +void mei_me_cl_rm_all(struct mei_device *dev); + +/** + * mei_me_cl_is_active - check whether me client is active in the fw + * + * @me_cl: me client + * + * Return: true if the me client is active in the firmware + */ +static inline bool mei_me_cl_is_active(const struct mei_me_client *me_cl) +{ + return !list_empty_careful(&me_cl->list); +} + +/** + * mei_me_cl_uuid - return me client protocol name (uuid) + * + * @me_cl: me client + * + * Return: me client protocol name + */ +static inline const uuid_le *mei_me_cl_uuid(const struct mei_me_client *me_cl) +{ + return &me_cl->props.protocol_name; +} + +/** + * mei_me_cl_ver - return me client protocol version + * + * @me_cl: me client + * + * Return: me client protocol version + */ +static inline u8 mei_me_cl_ver(const struct mei_me_client *me_cl) +{ + return me_cl->props.protocol_version; +} + +/** + * mei_me_cl_max_conn - return me client max number of connections + * + * @me_cl: me client + * + * Return: me client max number of connections + */ +static inline u8 mei_me_cl_max_conn(const struct mei_me_client *me_cl) +{ + return me_cl->props.max_number_of_connections; +} + +/** + * mei_me_cl_fixed - return me client fixed address, if any + * + * @me_cl: me client + * + * Return: me client fixed address + */ +static inline u8 mei_me_cl_fixed(const struct mei_me_client *me_cl) +{ + return me_cl->props.fixed_address; +} + +/** + * mei_me_cl_vt - return me client vtag supported status + * + * @me_cl: me client + * + * Return: true if me client supports vt tagging + */ +static inline bool mei_me_cl_vt(const struct mei_me_client *me_cl) +{ + return me_cl->props.vt_supported == 1; +} + +/** + * mei_me_cl_max_len - return me client max msg length + * + * @me_cl: me client + * + * Return: me client max msg length + */ +static inline u32 mei_me_cl_max_len(const struct mei_me_client *me_cl) +{ + return me_cl->props.max_msg_length; +} + +/* + * MEI IO Functions + */ +void mei_io_cb_free(struct mei_cl_cb *priv_cb); + +/* + * MEI Host Client Functions + */ + +struct mei_cl *mei_cl_allocate(struct mei_device *dev); + +int mei_cl_link(struct mei_cl *cl); +int mei_cl_unlink(struct mei_cl *cl); + +struct mei_cl *mei_cl_alloc_linked(struct mei_device *dev); + +struct mei_cl_cb *mei_cl_read_cb(struct mei_cl *cl, const struct file *fp); + +void mei_cl_add_rd_completed(struct mei_cl *cl, struct mei_cl_cb *cb); +void mei_cl_del_rd_completed(struct mei_cl *cl, struct mei_cl_cb *cb); + +struct mei_cl_cb *mei_cl_alloc_cb(struct mei_cl *cl, size_t length, + enum mei_cb_file_ops type, + const struct file *fp); +struct mei_cl_cb *mei_cl_enqueue_ctrl_wr_cb(struct mei_cl *cl, size_t length, + enum mei_cb_file_ops type, + const struct file *fp); +int mei_cl_flush_queues(struct mei_cl *cl, const struct file *fp); + +struct mei_cl_vtag *mei_cl_vtag_alloc(struct file *fp, u8 vtag); +const struct file *mei_cl_fp_by_vtag(const struct mei_cl *cl, u8 vtag); +int mei_cl_vt_support_check(const struct mei_cl *cl); +/* + * MEI input output function prototype + */ + +/** + * mei_cl_is_connected - host client is connected + * + * @cl: host client + * + * Return: true if the host client is connected + */ +static inline bool mei_cl_is_connected(const struct mei_cl *cl) +{ + return cl->state == MEI_FILE_CONNECTED; +} + +/** + * mei_cl_me_id - me client id + * + * @cl: host client + * + * Return: me client id or 0 if client is not connected + */ +static inline u8 mei_cl_me_id(const struct mei_cl *cl) +{ + return cl->me_cl ? cl->me_cl->client_id : 0; +} + +/** + * mei_cl_mtu - maximal message that client can send and receive + * + * @cl: host client + * + * Return: mtu or 0 if client is not connected + */ +static inline size_t mei_cl_mtu(const struct mei_cl *cl) +{ + return cl->me_cl ? cl->me_cl->props.max_msg_length : 0; +} + +/** + * mei_cl_is_fixed_address - check whether the me client uses fixed address + * + * @cl: host client + * + * Return: true if the client is connected and it has fixed me address + */ +static inline bool mei_cl_is_fixed_address(const struct mei_cl *cl) +{ + return cl->me_cl && cl->me_cl->props.fixed_address; +} + +/** + * mei_cl_is_single_recv_buf- check whether the me client + * uses single receiving buffer + * + * @cl: host client + * + * Return: true if single_recv_buf == 1; 0 otherwise + */ +static inline bool mei_cl_is_single_recv_buf(const struct mei_cl *cl) +{ + return cl->me_cl->props.single_recv_buf; +} + +/** + * mei_cl_uuid - client's uuid + * + * @cl: host client + * + * Return: return uuid of connected me client + */ +static inline const uuid_le *mei_cl_uuid(const struct mei_cl *cl) +{ + return mei_me_cl_uuid(cl->me_cl); +} + +/** + * mei_cl_host_addr - client's host address + * + * @cl: host client + * + * Return: 0 for fixed address client, host address for dynamic client + */ +static inline u8 mei_cl_host_addr(const struct mei_cl *cl) +{ + return mei_cl_is_fixed_address(cl) ? 0 : cl->host_client_id; +} + +int mei_cl_disconnect(struct mei_cl *cl); +int mei_cl_irq_disconnect(struct mei_cl *cl, struct mei_cl_cb *cb, + struct list_head *cmpl_list); +int mei_cl_connect(struct mei_cl *cl, struct mei_me_client *me_cl, + const struct file *file); +int mei_cl_irq_connect(struct mei_cl *cl, struct mei_cl_cb *cb, + struct list_head *cmpl_list); +int mei_cl_read_start(struct mei_cl *cl, size_t length, const struct file *fp); +ssize_t mei_cl_write(struct mei_cl *cl, struct mei_cl_cb *cb, unsigned long timeout); +int mei_cl_irq_write(struct mei_cl *cl, struct mei_cl_cb *cb, + struct list_head *cmpl_list); + +void mei_cl_complete(struct mei_cl *cl, struct mei_cl_cb *cb); + +void mei_host_client_init(struct mei_device *dev); + +u8 mei_cl_notify_fop2req(enum mei_cb_file_ops fop); +enum mei_cb_file_ops mei_cl_notify_req2fop(u8 request); +int mei_cl_notify_request(struct mei_cl *cl, + const struct file *file, u8 request); +int mei_cl_irq_notify(struct mei_cl *cl, struct mei_cl_cb *cb, + struct list_head *cmpl_list); +int mei_cl_notify_get(struct mei_cl *cl, bool block, bool *notify_ev); +void mei_cl_notify(struct mei_cl *cl); + +void mei_cl_all_disconnect(struct mei_device *dev); + +int mei_cl_irq_dma_map(struct mei_cl *cl, struct mei_cl_cb *cb, + struct list_head *cmpl_list); +int mei_cl_irq_dma_unmap(struct mei_cl *cl, struct mei_cl_cb *cb, + struct list_head *cmpl_list); +int mei_cl_dma_alloc_and_map(struct mei_cl *cl, const struct file *fp, + u8 buffer_id, size_t size); +int mei_cl_dma_unmap(struct mei_cl *cl, const struct file *fp); + +#define MEI_CL_FMT "cl:host=%02d me=%02d " +#define MEI_CL_PRM(cl) (cl)->host_client_id, mei_cl_me_id(cl) + +#define cl_dbg(dev, cl, format, arg...) \ + dev_dbg((dev)->dev, MEI_CL_FMT format, MEI_CL_PRM(cl), ##arg) + +#define cl_warn(dev, cl, format, arg...) \ + dev_warn((dev)->dev, MEI_CL_FMT format, MEI_CL_PRM(cl), ##arg) + +#define cl_err(dev, cl, format, arg...) \ + dev_err((dev)->dev, MEI_CL_FMT format, MEI_CL_PRM(cl), ##arg) + +#endif /* _MEI_CLIENT_H_ */ diff --git a/drivers/misc/mei/debugfs.c b/drivers/misc/mei/debugfs.c new file mode 100644 index 0000000000..3b098d4c8e --- /dev/null +++ b/drivers/misc/mei/debugfs.c @@ -0,0 +1,195 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2012-2022, Intel Corporation. All rights reserved + * Intel Management Engine Interface (Intel MEI) Linux driver + */ + +#include <linux/slab.h> +#include <linux/kernel.h> +#include <linux/device.h> +#include <linux/debugfs.h> +#include <linux/seq_file.h> + +#include <linux/mei.h> + +#include "mei_dev.h" +#include "client.h" +#include "hw.h" + +static int mei_dbgfs_meclients_show(struct seq_file *m, void *unused) +{ + struct mei_device *dev = m->private; + struct mei_me_client *me_cl; + int i = 0; + + if (!dev) + return -ENODEV; + + down_read(&dev->me_clients_rwsem); + + seq_puts(m, " |id|fix| UUID |con|msg len|sb|refc|vt|\n"); + + /* if the driver is not enabled the list won't be consistent */ + if (dev->dev_state != MEI_DEV_ENABLED) + goto out; + + list_for_each_entry(me_cl, &dev->me_clients, list) { + if (!mei_me_cl_get(me_cl)) + continue; + + seq_printf(m, "%2d|%2d|%3d|%pUl|%3d|%7d|%2d|%4d|%2d|\n", + i++, me_cl->client_id, + me_cl->props.fixed_address, + &me_cl->props.protocol_name, + me_cl->props.max_number_of_connections, + me_cl->props.max_msg_length, + me_cl->props.single_recv_buf, + kref_read(&me_cl->refcnt), + me_cl->props.vt_supported); + mei_me_cl_put(me_cl); + } + +out: + up_read(&dev->me_clients_rwsem); + return 0; +} +DEFINE_SHOW_ATTRIBUTE(mei_dbgfs_meclients); + +static int mei_dbgfs_active_show(struct seq_file *m, void *unused) +{ + struct mei_device *dev = m->private; + struct mei_cl *cl; + int i = 0; + + if (!dev) + return -ENODEV; + + mutex_lock(&dev->device_lock); + + seq_puts(m, " |me|host|state|rd|wr|wrq\n"); + + /* if the driver is not enabled the list won't be consistent */ + if (dev->dev_state != MEI_DEV_ENABLED) + goto out; + + list_for_each_entry(cl, &dev->file_list, link) { + + seq_printf(m, "%3d|%2d|%4d|%5d|%2d|%2d|%3u\n", + i, mei_cl_me_id(cl), cl->host_client_id, cl->state, + !list_empty(&cl->rd_completed), cl->writing_state, + cl->tx_cb_queued); + i++; + } +out: + mutex_unlock(&dev->device_lock); + return 0; +} +DEFINE_SHOW_ATTRIBUTE(mei_dbgfs_active); + +static const char *mei_dev_pxp_mode_str(enum mei_dev_pxp_mode state) +{ +#define MEI_PXP_MODE(state) case MEI_DEV_PXP_##state: return #state + switch (state) { + MEI_PXP_MODE(DEFAULT); + MEI_PXP_MODE(INIT); + MEI_PXP_MODE(SETUP); + MEI_PXP_MODE(READY); + default: + return "unknown"; + } +#undef MEI_PXP_MODE +} + +static int mei_dbgfs_devstate_show(struct seq_file *m, void *unused) +{ + struct mei_device *dev = m->private; + + seq_printf(m, "dev: %s\n", mei_dev_state_str(dev->dev_state)); + seq_printf(m, "hbm: %s\n", mei_hbm_state_str(dev->hbm_state)); + + if (dev->hbm_state >= MEI_HBM_ENUM_CLIENTS && + dev->hbm_state <= MEI_HBM_STARTED) { + seq_puts(m, "hbm features:\n"); + seq_printf(m, "\tPG: %01d\n", dev->hbm_f_pg_supported); + seq_printf(m, "\tDC: %01d\n", dev->hbm_f_dc_supported); + seq_printf(m, "\tIE: %01d\n", dev->hbm_f_ie_supported); + seq_printf(m, "\tDOT: %01d\n", dev->hbm_f_dot_supported); + seq_printf(m, "\tEV: %01d\n", dev->hbm_f_ev_supported); + seq_printf(m, "\tFA: %01d\n", dev->hbm_f_fa_supported); + seq_printf(m, "\tOS: %01d\n", dev->hbm_f_os_supported); + seq_printf(m, "\tDR: %01d\n", dev->hbm_f_dr_supported); + seq_printf(m, "\tVT: %01d\n", dev->hbm_f_vt_supported); + seq_printf(m, "\tCAP: %01d\n", dev->hbm_f_cap_supported); + seq_printf(m, "\tCD: %01d\n", dev->hbm_f_cd_supported); + } + + seq_printf(m, "pg: %s, %s\n", + mei_pg_is_enabled(dev) ? "ENABLED" : "DISABLED", + mei_pg_state_str(mei_pg_state(dev))); + + seq_printf(m, "pxp: %s\n", mei_dev_pxp_mode_str(dev->pxp_mode)); + + return 0; +} +DEFINE_SHOW_ATTRIBUTE(mei_dbgfs_devstate); + +static ssize_t mei_dbgfs_write_allow_fa(struct file *file, + const char __user *user_buf, + size_t count, loff_t *ppos) +{ + struct mei_device *dev; + int ret; + + dev = container_of(file->private_data, + struct mei_device, allow_fixed_address); + + ret = debugfs_write_file_bool(file, user_buf, count, ppos); + if (ret < 0) + return ret; + dev->override_fixed_address = true; + return ret; +} + +static const struct file_operations mei_dbgfs_allow_fa_fops = { + .open = simple_open, + .read = debugfs_read_file_bool, + .write = mei_dbgfs_write_allow_fa, + .llseek = generic_file_llseek, +}; + +/** + * mei_dbgfs_deregister - Remove the debugfs files and directories + * + * @dev: the mei device structure + */ +void mei_dbgfs_deregister(struct mei_device *dev) +{ + if (!dev->dbgfs_dir) + return; + debugfs_remove_recursive(dev->dbgfs_dir); + dev->dbgfs_dir = NULL; +} + +/** + * mei_dbgfs_register - Add the debugfs files + * + * @dev: the mei device structure + * @name: the mei device name + */ +void mei_dbgfs_register(struct mei_device *dev, const char *name) +{ + struct dentry *dir; + + dir = debugfs_create_dir(name, NULL); + dev->dbgfs_dir = dir; + + debugfs_create_file("meclients", S_IRUSR, dir, dev, + &mei_dbgfs_meclients_fops); + debugfs_create_file("active", S_IRUSR, dir, dev, + &mei_dbgfs_active_fops); + debugfs_create_file("devstate", S_IRUSR, dir, dev, + &mei_dbgfs_devstate_fops); + debugfs_create_file("allow_fixed_address", S_IRUSR | S_IWUSR, dir, + &dev->allow_fixed_address, + &mei_dbgfs_allow_fa_fops); +} diff --git a/drivers/misc/mei/dma-ring.c b/drivers/misc/mei/dma-ring.c new file mode 100644 index 0000000000..ef56f849b2 --- /dev/null +++ b/drivers/misc/mei/dma-ring.c @@ -0,0 +1,269 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright(c) 2016-2018 Intel Corporation. All rights reserved. + */ +#include <linux/dma-mapping.h> +#include <linux/mei.h> + +#include "mei_dev.h" + +/** + * mei_dmam_dscr_alloc() - allocate a managed coherent buffer + * for the dma descriptor + * @dev: mei_device + * @dscr: dma descriptor + * + * Return: + * * 0 - on success or zero allocation request + * * -EINVAL - if size is not power of 2 + * * -ENOMEM - of allocation has failed + */ +static int mei_dmam_dscr_alloc(struct mei_device *dev, + struct mei_dma_dscr *dscr) +{ + if (!dscr->size) + return 0; + + if (WARN_ON(!is_power_of_2(dscr->size))) + return -EINVAL; + + if (dscr->vaddr) + return 0; + + dscr->vaddr = dmam_alloc_coherent(dev->dev, dscr->size, &dscr->daddr, + GFP_KERNEL); + if (!dscr->vaddr) + return -ENOMEM; + + return 0; +} + +/** + * mei_dmam_dscr_free() - free a managed coherent buffer + * from the dma descriptor + * @dev: mei_device + * @dscr: dma descriptor + */ +static void mei_dmam_dscr_free(struct mei_device *dev, + struct mei_dma_dscr *dscr) +{ + if (!dscr->vaddr) + return; + + dmam_free_coherent(dev->dev, dscr->size, dscr->vaddr, dscr->daddr); + dscr->vaddr = NULL; +} + +/** + * mei_dmam_ring_free() - free dma ring buffers + * @dev: mei device + */ +void mei_dmam_ring_free(struct mei_device *dev) +{ + int i; + + for (i = 0; i < DMA_DSCR_NUM; i++) + mei_dmam_dscr_free(dev, &dev->dr_dscr[i]); +} + +/** + * mei_dmam_ring_alloc() - allocate dma ring buffers + * @dev: mei device + * + * Return: -ENOMEM on allocation failure 0 otherwise + */ +int mei_dmam_ring_alloc(struct mei_device *dev) +{ + int i; + + for (i = 0; i < DMA_DSCR_NUM; i++) + if (mei_dmam_dscr_alloc(dev, &dev->dr_dscr[i])) + goto err; + + return 0; + +err: + mei_dmam_ring_free(dev); + return -ENOMEM; +} + +/** + * mei_dma_ring_is_allocated() - check if dma ring is allocated + * @dev: mei device + * + * Return: true if dma ring is allocated + */ +bool mei_dma_ring_is_allocated(struct mei_device *dev) +{ + return !!dev->dr_dscr[DMA_DSCR_HOST].vaddr; +} + +static inline +struct hbm_dma_ring_ctrl *mei_dma_ring_ctrl(struct mei_device *dev) +{ + return (struct hbm_dma_ring_ctrl *)dev->dr_dscr[DMA_DSCR_CTRL].vaddr; +} + +/** + * mei_dma_ring_reset() - reset the dma control block + * @dev: mei device + */ +void mei_dma_ring_reset(struct mei_device *dev) +{ + struct hbm_dma_ring_ctrl *ctrl = mei_dma_ring_ctrl(dev); + + if (!ctrl) + return; + + memset(ctrl, 0, sizeof(*ctrl)); +} + +/** + * mei_dma_copy_from() - copy from dma ring into buffer + * @dev: mei device + * @buf: data buffer + * @offset: offset in slots. + * @n: number of slots to copy. + */ +static size_t mei_dma_copy_from(struct mei_device *dev, unsigned char *buf, + u32 offset, u32 n) +{ + unsigned char *dbuf = dev->dr_dscr[DMA_DSCR_DEVICE].vaddr; + + size_t b_offset = offset << 2; + size_t b_n = n << 2; + + memcpy(buf, dbuf + b_offset, b_n); + + return b_n; +} + +/** + * mei_dma_copy_to() - copy to a buffer to the dma ring + * @dev: mei device + * @buf: data buffer + * @offset: offset in slots. + * @n: number of slots to copy. + */ +static size_t mei_dma_copy_to(struct mei_device *dev, unsigned char *buf, + u32 offset, u32 n) +{ + unsigned char *hbuf = dev->dr_dscr[DMA_DSCR_HOST].vaddr; + + size_t b_offset = offset << 2; + size_t b_n = n << 2; + + memcpy(hbuf + b_offset, buf, b_n); + + return b_n; +} + +/** + * mei_dma_ring_read() - read data from the ring + * @dev: mei device + * @buf: buffer to read into: may be NULL in case of droping the data. + * @len: length to read. + */ +void mei_dma_ring_read(struct mei_device *dev, unsigned char *buf, u32 len) +{ + struct hbm_dma_ring_ctrl *ctrl = mei_dma_ring_ctrl(dev); + u32 dbuf_depth; + u32 rd_idx, rem, slots; + + if (WARN_ON(!ctrl)) + return; + + dev_dbg(dev->dev, "reading from dma %u bytes\n", len); + + if (!len) + return; + + dbuf_depth = dev->dr_dscr[DMA_DSCR_DEVICE].size >> 2; + rd_idx = READ_ONCE(ctrl->dbuf_rd_idx) & (dbuf_depth - 1); + slots = mei_data2slots(len); + + /* if buf is NULL we drop the packet by advancing the pointer.*/ + if (!buf) + goto out; + + if (rd_idx + slots > dbuf_depth) { + buf += mei_dma_copy_from(dev, buf, rd_idx, dbuf_depth - rd_idx); + rem = slots - (dbuf_depth - rd_idx); + rd_idx = 0; + } else { + rem = slots; + } + + mei_dma_copy_from(dev, buf, rd_idx, rem); +out: + WRITE_ONCE(ctrl->dbuf_rd_idx, ctrl->dbuf_rd_idx + slots); +} + +static inline u32 mei_dma_ring_hbuf_depth(struct mei_device *dev) +{ + return dev->dr_dscr[DMA_DSCR_HOST].size >> 2; +} + +/** + * mei_dma_ring_empty_slots() - calaculate number of empty slots in dma ring + * @dev: mei_device + * + * Return: number of empty slots + */ +u32 mei_dma_ring_empty_slots(struct mei_device *dev) +{ + struct hbm_dma_ring_ctrl *ctrl = mei_dma_ring_ctrl(dev); + u32 wr_idx, rd_idx, hbuf_depth, empty; + + if (!mei_dma_ring_is_allocated(dev)) + return 0; + + if (WARN_ON(!ctrl)) + return 0; + + /* easier to work in slots */ + hbuf_depth = mei_dma_ring_hbuf_depth(dev); + rd_idx = READ_ONCE(ctrl->hbuf_rd_idx); + wr_idx = READ_ONCE(ctrl->hbuf_wr_idx); + + if (rd_idx > wr_idx) + empty = rd_idx - wr_idx; + else + empty = hbuf_depth - (wr_idx - rd_idx); + + return empty; +} + +/** + * mei_dma_ring_write - write data to dma ring host buffer + * + * @dev: mei_device + * @buf: data will be written + * @len: data length + */ +void mei_dma_ring_write(struct mei_device *dev, unsigned char *buf, u32 len) +{ + struct hbm_dma_ring_ctrl *ctrl = mei_dma_ring_ctrl(dev); + u32 hbuf_depth; + u32 wr_idx, rem, slots; + + if (WARN_ON(!ctrl)) + return; + + dev_dbg(dev->dev, "writing to dma %u bytes\n", len); + hbuf_depth = mei_dma_ring_hbuf_depth(dev); + wr_idx = READ_ONCE(ctrl->hbuf_wr_idx) & (hbuf_depth - 1); + slots = mei_data2slots(len); + + if (wr_idx + slots > hbuf_depth) { + buf += mei_dma_copy_to(dev, buf, wr_idx, hbuf_depth - wr_idx); + rem = slots - (hbuf_depth - wr_idx); + wr_idx = 0; + } else { + rem = slots; + } + + mei_dma_copy_to(dev, buf, wr_idx, rem); + + WRITE_ONCE(ctrl->hbuf_wr_idx, ctrl->hbuf_wr_idx + slots); +} diff --git a/drivers/misc/mei/gsc-me.c b/drivers/misc/mei/gsc-me.c new file mode 100644 index 0000000000..6be8f1cc05 --- /dev/null +++ b/drivers/misc/mei/gsc-me.c @@ -0,0 +1,316 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright(c) 2019-2022, Intel Corporation. All rights reserved. + * + * Intel Management Engine Interface (Intel MEI) Linux driver + */ + +#include <linux/module.h> +#include <linux/mei_aux.h> +#include <linux/device.h> +#include <linux/irqreturn.h> +#include <linux/jiffies.h> +#include <linux/ktime.h> +#include <linux/delay.h> +#include <linux/pm_runtime.h> +#include <linux/kthread.h> + +#include "mei_dev.h" +#include "hw-me.h" +#include "hw-me-regs.h" + +#include "mei-trace.h" + +#define MEI_GSC_RPM_TIMEOUT 500 + +static int mei_gsc_read_hfs(const struct mei_device *dev, int where, u32 *val) +{ + struct mei_me_hw *hw = to_me_hw(dev); + + *val = ioread32(hw->mem_addr + where + 0xC00); + + return 0; +} + +static void mei_gsc_set_ext_op_mem(const struct mei_me_hw *hw, struct resource *mem) +{ + u32 low = lower_32_bits(mem->start); + u32 hi = upper_32_bits(mem->start); + u32 limit = (resource_size(mem) / SZ_4K) | GSC_EXT_OP_MEM_VALID; + + iowrite32(low, hw->mem_addr + H_GSC_EXT_OP_MEM_BASE_ADDR_LO_REG); + iowrite32(hi, hw->mem_addr + H_GSC_EXT_OP_MEM_BASE_ADDR_HI_REG); + iowrite32(limit, hw->mem_addr + H_GSC_EXT_OP_MEM_LIMIT_REG); +} + +static int mei_gsc_probe(struct auxiliary_device *aux_dev, + const struct auxiliary_device_id *aux_dev_id) +{ + struct mei_aux_device *adev = auxiliary_dev_to_mei_aux_dev(aux_dev); + struct mei_device *dev; + struct mei_me_hw *hw; + struct device *device; + const struct mei_cfg *cfg; + int ret; + + cfg = mei_me_get_cfg(aux_dev_id->driver_data); + if (!cfg) + return -ENODEV; + + device = &aux_dev->dev; + + dev = mei_me_dev_init(device, cfg, adev->slow_firmware); + if (!dev) { + ret = -ENOMEM; + goto err; + } + + hw = to_me_hw(dev); + hw->mem_addr = devm_ioremap_resource(device, &adev->bar); + if (IS_ERR(hw->mem_addr)) { + ret = PTR_ERR(hw->mem_addr); + goto err; + } + + hw->irq = adev->irq; + hw->read_fws = mei_gsc_read_hfs; + + dev_set_drvdata(device, dev); + + if (adev->ext_op_mem.start) { + mei_gsc_set_ext_op_mem(hw, &adev->ext_op_mem); + dev->pxp_mode = MEI_DEV_PXP_INIT; + } + + /* use polling */ + if (mei_me_hw_use_polling(hw)) { + mei_disable_interrupts(dev); + mei_clear_interrupts(dev); + init_waitqueue_head(&hw->wait_active); + hw->is_active = true; /* start in active mode for initialization */ + hw->polling_thread = kthread_run(mei_me_polling_thread, dev, + "kmegscirqd/%s", dev_name(device)); + if (IS_ERR(hw->polling_thread)) { + ret = PTR_ERR(hw->polling_thread); + dev_err(device, "unable to create kernel thread: %d\n", ret); + goto err; + } + } else { + ret = devm_request_threaded_irq(device, hw->irq, + mei_me_irq_quick_handler, + mei_me_irq_thread_handler, + IRQF_ONESHOT, KBUILD_MODNAME, dev); + if (ret) { + dev_err(device, "irq register failed %d\n", ret); + goto err; + } + } + + pm_runtime_get_noresume(device); + pm_runtime_set_active(device); + pm_runtime_enable(device); + + /* Continue to char device setup in spite of firmware handshake failure. + * In order to provide access to the firmware status registers to the user + * space via sysfs. + */ + if (mei_start(dev)) + dev_warn(device, "init hw failure.\n"); + + pm_runtime_set_autosuspend_delay(device, MEI_GSC_RPM_TIMEOUT); + pm_runtime_use_autosuspend(device); + + ret = mei_register(dev, device); + if (ret) + goto register_err; + + pm_runtime_put_noidle(device); + return 0; + +register_err: + mei_stop(dev); + if (!mei_me_hw_use_polling(hw)) + devm_free_irq(device, hw->irq, dev); + +err: + dev_err(device, "probe failed: %d\n", ret); + dev_set_drvdata(device, NULL); + return ret; +} + +static void mei_gsc_remove(struct auxiliary_device *aux_dev) +{ + struct mei_device *dev; + struct mei_me_hw *hw; + + dev = dev_get_drvdata(&aux_dev->dev); + if (!dev) + return; + + hw = to_me_hw(dev); + + mei_stop(dev); + + hw = to_me_hw(dev); + if (mei_me_hw_use_polling(hw)) + kthread_stop(hw->polling_thread); + + mei_deregister(dev); + + pm_runtime_disable(&aux_dev->dev); + + mei_disable_interrupts(dev); + if (!mei_me_hw_use_polling(hw)) + devm_free_irq(&aux_dev->dev, hw->irq, dev); +} + +static int __maybe_unused mei_gsc_pm_suspend(struct device *device) +{ + struct mei_device *dev = dev_get_drvdata(device); + + if (!dev) + return -ENODEV; + + mei_stop(dev); + + mei_disable_interrupts(dev); + + return 0; +} + +static int __maybe_unused mei_gsc_pm_resume(struct device *device) +{ + struct mei_device *dev = dev_get_drvdata(device); + struct auxiliary_device *aux_dev; + struct mei_aux_device *adev; + int err; + struct mei_me_hw *hw; + + if (!dev) + return -ENODEV; + + hw = to_me_hw(dev); + aux_dev = to_auxiliary_dev(device); + adev = auxiliary_dev_to_mei_aux_dev(aux_dev); + if (adev->ext_op_mem.start) { + mei_gsc_set_ext_op_mem(hw, &adev->ext_op_mem); + dev->pxp_mode = MEI_DEV_PXP_INIT; + } + + err = mei_restart(dev); + if (err) + return err; + + /* Start timer if stopped in suspend */ + schedule_delayed_work(&dev->timer_work, HZ); + + return 0; +} + +static int __maybe_unused mei_gsc_pm_runtime_idle(struct device *device) +{ + struct mei_device *dev = dev_get_drvdata(device); + + if (!dev) + return -ENODEV; + if (mei_write_is_idle(dev)) + pm_runtime_autosuspend(device); + + return -EBUSY; +} + +static int __maybe_unused mei_gsc_pm_runtime_suspend(struct device *device) +{ + struct mei_device *dev = dev_get_drvdata(device); + struct mei_me_hw *hw; + int ret; + + if (!dev) + return -ENODEV; + + mutex_lock(&dev->device_lock); + + if (mei_write_is_idle(dev)) { + hw = to_me_hw(dev); + hw->pg_state = MEI_PG_ON; + + if (mei_me_hw_use_polling(hw)) + hw->is_active = false; + ret = 0; + } else { + ret = -EAGAIN; + } + + mutex_unlock(&dev->device_lock); + + return ret; +} + +static int __maybe_unused mei_gsc_pm_runtime_resume(struct device *device) +{ + struct mei_device *dev = dev_get_drvdata(device); + struct mei_me_hw *hw; + irqreturn_t irq_ret; + + if (!dev) + return -ENODEV; + + mutex_lock(&dev->device_lock); + + hw = to_me_hw(dev); + hw->pg_state = MEI_PG_OFF; + + if (mei_me_hw_use_polling(hw)) { + hw->is_active = true; + wake_up(&hw->wait_active); + } + + mutex_unlock(&dev->device_lock); + + irq_ret = mei_me_irq_thread_handler(1, dev); + if (irq_ret != IRQ_HANDLED) + dev_err(dev->dev, "thread handler fail %d\n", irq_ret); + + return 0; +} + +static const struct dev_pm_ops mei_gsc_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(mei_gsc_pm_suspend, + mei_gsc_pm_resume) + SET_RUNTIME_PM_OPS(mei_gsc_pm_runtime_suspend, + mei_gsc_pm_runtime_resume, + mei_gsc_pm_runtime_idle) +}; + +static const struct auxiliary_device_id mei_gsc_id_table[] = { + { + .name = "i915.mei-gsc", + .driver_data = MEI_ME_GSC_CFG, + + }, + { + .name = "i915.mei-gscfi", + .driver_data = MEI_ME_GSCFI_CFG, + }, + { + /* sentinel */ + } +}; +MODULE_DEVICE_TABLE(auxiliary, mei_gsc_id_table); + +static struct auxiliary_driver mei_gsc_driver = { + .probe = mei_gsc_probe, + .remove = mei_gsc_remove, + .driver = { + /* auxiliary_driver_register() sets .name to be the modname */ + .pm = &mei_gsc_pm_ops, + }, + .id_table = mei_gsc_id_table +}; +module_auxiliary_driver(mei_gsc_driver); + +MODULE_AUTHOR("Intel Corporation"); +MODULE_ALIAS("auxiliary:i915.mei-gsc"); +MODULE_ALIAS("auxiliary:i915.mei-gscfi"); +MODULE_DESCRIPTION("Intel(R) Graphics System Controller"); +MODULE_LICENSE("GPL"); diff --git a/drivers/misc/mei/gsc_proxy/Kconfig b/drivers/misc/mei/gsc_proxy/Kconfig new file mode 100644 index 0000000000..5f68d9f3d6 --- /dev/null +++ b/drivers/misc/mei/gsc_proxy/Kconfig @@ -0,0 +1,14 @@ +# SPDX-License-Identifier: GPL-2.0 +# Copyright (c) 2022-2023, Intel Corporation. All rights reserved. +# +config INTEL_MEI_GSC_PROXY + tristate "Intel GSC Proxy services of ME Interface" + select INTEL_MEI_ME + depends on DRM_I915 + help + MEI Support for GSC Proxy Services on Intel platforms. + + MEI GSC proxy enables messaging between GSC service on + Intel graphics card and services on CSE (MEI) firmware + residing SoC or PCH. + diff --git a/drivers/misc/mei/gsc_proxy/Makefile b/drivers/misc/mei/gsc_proxy/Makefile new file mode 100644 index 0000000000..358847e9aa --- /dev/null +++ b/drivers/misc/mei/gsc_proxy/Makefile @@ -0,0 +1,7 @@ +# SPDX-License-Identifier: GPL-2.0 +# +# Copyright (c) 2022-2023, Intel Corporation. All rights reserved. +# +# Makefile - GSC Proxy client driver for Intel MEI Bus Driver. + +obj-$(CONFIG_INTEL_MEI_GSC_PROXY) += mei_gsc_proxy.o diff --git a/drivers/misc/mei/gsc_proxy/mei_gsc_proxy.c b/drivers/misc/mei/gsc_proxy/mei_gsc_proxy.c new file mode 100644 index 0000000000..be52b113ae --- /dev/null +++ b/drivers/misc/mei/gsc_proxy/mei_gsc_proxy.c @@ -0,0 +1,208 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2022-2023 Intel Corporation + */ + +/** + * DOC: MEI_GSC_PROXY Client Driver + * + * The mei_gsc_proxy driver acts as a translation layer between + * proxy user (I915) and ME FW by proxying messages to ME FW + */ + +#include <linux/component.h> +#include <linux/mei_cl_bus.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/slab.h> +#include <linux/uuid.h> +#include <drm/drm_connector.h> +#include <drm/i915_component.h> +#include <drm/i915_gsc_proxy_mei_interface.h> + +/** + * mei_gsc_proxy_send - Sends a proxy message to ME FW. + * @dev: device corresponding to the mei_cl_device + * @buf: a message buffer to send + * @size: size of the message + * Return: bytes sent on Success, <0 on Failure + */ +static int mei_gsc_proxy_send(struct device *dev, const void *buf, size_t size) +{ + ssize_t ret; + + if (!dev || !buf) + return -EINVAL; + + ret = mei_cldev_send(to_mei_cl_device(dev), buf, size); + if (ret < 0) + dev_dbg(dev, "mei_cldev_send failed. %zd\n", ret); + + return ret; +} + +/** + * mei_gsc_proxy_recv - Receives a proxy message from ME FW. + * @dev: device corresponding to the mei_cl_device + * @buf: a message buffer to contain the received message + * @size: size of the buffer + * Return: bytes received on Success, <0 on Failure + */ +static int mei_gsc_proxy_recv(struct device *dev, void *buf, size_t size) +{ + ssize_t ret; + + if (!dev || !buf) + return -EINVAL; + + ret = mei_cldev_recv(to_mei_cl_device(dev), buf, size); + if (ret < 0) + dev_dbg(dev, "mei_cldev_recv failed. %zd\n", ret); + + return ret; +} + +static const struct i915_gsc_proxy_component_ops mei_gsc_proxy_ops = { + .owner = THIS_MODULE, + .send = mei_gsc_proxy_send, + .recv = mei_gsc_proxy_recv, +}; + +static int mei_component_master_bind(struct device *dev) +{ + struct mei_cl_device *cldev = to_mei_cl_device(dev); + struct i915_gsc_proxy_component *comp_master = mei_cldev_get_drvdata(cldev); + + comp_master->ops = &mei_gsc_proxy_ops; + comp_master->mei_dev = dev; + return component_bind_all(dev, comp_master); +} + +static void mei_component_master_unbind(struct device *dev) +{ + struct mei_cl_device *cldev = to_mei_cl_device(dev); + struct i915_gsc_proxy_component *comp_master = mei_cldev_get_drvdata(cldev); + + component_unbind_all(dev, comp_master); +} + +static const struct component_master_ops mei_component_master_ops = { + .bind = mei_component_master_bind, + .unbind = mei_component_master_unbind, +}; + +/** + * mei_gsc_proxy_component_match - compare function for matching mei. + * + * The function checks if the device is pci device and + * Intel VGA adapter, the subcomponent is SW Proxy + * and the parent of MEI PCI and the parent of VGA are the same PCH device. + * + * @dev: master device + * @subcomponent: subcomponent to match (I915_COMPONENT_SWPROXY) + * @data: compare data (mei pci parent) + * + * Return: + * * 1 - if components match + * * 0 - otherwise + */ +static int mei_gsc_proxy_component_match(struct device *dev, int subcomponent, + void *data) +{ + struct pci_dev *pdev; + + if (!dev_is_pci(dev)) + return 0; + + pdev = to_pci_dev(dev); + + if (pdev->class != (PCI_CLASS_DISPLAY_VGA << 8) || + pdev->vendor != PCI_VENDOR_ID_INTEL) + return 0; + + if (subcomponent != I915_COMPONENT_GSC_PROXY) + return 0; + + return component_compare_dev(dev->parent, ((struct device *)data)->parent); +} + +static int mei_gsc_proxy_probe(struct mei_cl_device *cldev, + const struct mei_cl_device_id *id) +{ + struct i915_gsc_proxy_component *comp_master; + struct component_match *master_match = NULL; + int ret; + + ret = mei_cldev_enable(cldev); + if (ret < 0) { + dev_err(&cldev->dev, "mei_cldev_enable Failed. %d\n", ret); + goto enable_err_exit; + } + + comp_master = kzalloc(sizeof(*comp_master), GFP_KERNEL); + if (!comp_master) { + ret = -ENOMEM; + goto err_exit; + } + + component_match_add_typed(&cldev->dev, &master_match, + mei_gsc_proxy_component_match, cldev->dev.parent); + if (IS_ERR_OR_NULL(master_match)) { + ret = -ENOMEM; + goto err_exit; + } + + mei_cldev_set_drvdata(cldev, comp_master); + ret = component_master_add_with_match(&cldev->dev, + &mei_component_master_ops, + master_match); + if (ret < 0) { + dev_err(&cldev->dev, "Master comp add failed %d\n", ret); + goto err_exit; + } + + return 0; + +err_exit: + mei_cldev_set_drvdata(cldev, NULL); + kfree(comp_master); + mei_cldev_disable(cldev); +enable_err_exit: + return ret; +} + +static void mei_gsc_proxy_remove(struct mei_cl_device *cldev) +{ + struct i915_gsc_proxy_component *comp_master = mei_cldev_get_drvdata(cldev); + int ret; + + component_master_del(&cldev->dev, &mei_component_master_ops); + kfree(comp_master); + mei_cldev_set_drvdata(cldev, NULL); + + ret = mei_cldev_disable(cldev); + if (ret) + dev_warn(&cldev->dev, "mei_cldev_disable() failed %d\n", ret); +} + +#define MEI_UUID_GSC_PROXY UUID_LE(0xf73db04, 0x97ab, 0x4125, \ + 0xb8, 0x93, 0xe9, 0x4, 0xad, 0xd, 0x54, 0x64) + +static struct mei_cl_device_id mei_gsc_proxy_tbl[] = { + { .uuid = MEI_UUID_GSC_PROXY, .version = MEI_CL_VERSION_ANY }, + { } +}; +MODULE_DEVICE_TABLE(mei, mei_gsc_proxy_tbl); + +static struct mei_cl_driver mei_gsc_proxy_driver = { + .id_table = mei_gsc_proxy_tbl, + .name = KBUILD_MODNAME, + .probe = mei_gsc_proxy_probe, + .remove = mei_gsc_proxy_remove, +}; + +module_mei_cl_driver(mei_gsc_proxy_driver); + +MODULE_AUTHOR("Intel Corporation"); +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("MEI GSC PROXY"); diff --git a/drivers/misc/mei/hbm.c b/drivers/misc/mei/hbm.c new file mode 100644 index 0000000000..12a62a911e --- /dev/null +++ b/drivers/misc/mei/hbm.c @@ -0,0 +1,1619 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2003-2022, Intel Corporation. All rights reserved. + * Intel Management Engine Interface (Intel MEI) Linux driver + */ +#include <linux/export.h> +#include <linux/sched.h> +#include <linux/wait.h> +#include <linux/pm_runtime.h> +#include <linux/slab.h> + +#include <linux/mei.h> + +#include "mei_dev.h" +#include "hbm.h" +#include "client.h" + +static const char *mei_hbm_status_str(enum mei_hbm_status status) +{ +#define MEI_HBM_STATUS(status) case MEI_HBMS_##status: return #status + switch (status) { + MEI_HBM_STATUS(SUCCESS); + MEI_HBM_STATUS(CLIENT_NOT_FOUND); + MEI_HBM_STATUS(ALREADY_EXISTS); + MEI_HBM_STATUS(REJECTED); + MEI_HBM_STATUS(INVALID_PARAMETER); + MEI_HBM_STATUS(NOT_ALLOWED); + MEI_HBM_STATUS(ALREADY_STARTED); + MEI_HBM_STATUS(NOT_STARTED); + default: return "unknown"; + } +#undef MEI_HBM_STATUS +}; + +static const char *mei_cl_conn_status_str(enum mei_cl_connect_status status) +{ +#define MEI_CL_CS(status) case MEI_CL_CONN_##status: return #status + switch (status) { + MEI_CL_CS(SUCCESS); + MEI_CL_CS(NOT_FOUND); + MEI_CL_CS(ALREADY_STARTED); + MEI_CL_CS(OUT_OF_RESOURCES); + MEI_CL_CS(MESSAGE_SMALL); + MEI_CL_CS(NOT_ALLOWED); + default: return "unknown"; + } +#undef MEI_CL_CCS +} + +const char *mei_hbm_state_str(enum mei_hbm_state state) +{ +#define MEI_HBM_STATE(state) case MEI_HBM_##state: return #state + switch (state) { + MEI_HBM_STATE(IDLE); + MEI_HBM_STATE(STARTING); + MEI_HBM_STATE(STARTED); + MEI_HBM_STATE(DR_SETUP); + MEI_HBM_STATE(ENUM_CLIENTS); + MEI_HBM_STATE(CLIENT_PROPERTIES); + MEI_HBM_STATE(STOPPED); + default: + return "unknown"; + } +#undef MEI_HBM_STATE +} + +/** + * mei_cl_conn_status_to_errno - convert client connect response + * status to error code + * + * @status: client connect response status + * + * Return: corresponding error code + */ +static int mei_cl_conn_status_to_errno(enum mei_cl_connect_status status) +{ + switch (status) { + case MEI_CL_CONN_SUCCESS: return 0; + case MEI_CL_CONN_NOT_FOUND: return -ENOTTY; + case MEI_CL_CONN_ALREADY_STARTED: return -EBUSY; + case MEI_CL_CONN_OUT_OF_RESOURCES: return -EBUSY; + case MEI_CL_CONN_MESSAGE_SMALL: return -EINVAL; + case MEI_CL_CONN_NOT_ALLOWED: return -EBUSY; + default: return -EINVAL; + } +} + +/** + * mei_hbm_write_message - wrapper for sending hbm messages. + * + * @dev: mei device + * @hdr: mei header + * @data: payload + */ +static inline int mei_hbm_write_message(struct mei_device *dev, + struct mei_msg_hdr *hdr, + const void *data) +{ + return mei_write_message(dev, hdr, sizeof(*hdr), data, hdr->length); +} + +/** + * mei_hbm_idle - set hbm to idle state + * + * @dev: the device structure + */ +void mei_hbm_idle(struct mei_device *dev) +{ + dev->init_clients_timer = 0; + dev->hbm_state = MEI_HBM_IDLE; +} + +/** + * mei_hbm_reset - reset hbm counters and book keeping data structurs + * + * @dev: the device structure + */ +void mei_hbm_reset(struct mei_device *dev) +{ + mei_me_cl_rm_all(dev); + + mei_hbm_idle(dev); +} + +/** + * mei_hbm_hdr - construct hbm header + * + * @mei_hdr: hbm header + * @length: payload length + */ + +static inline void mei_hbm_hdr(struct mei_msg_hdr *mei_hdr, size_t length) +{ + memset(mei_hdr, 0, sizeof(*mei_hdr)); + mei_hdr->length = length; + mei_hdr->msg_complete = 1; +} + +/** + * mei_hbm_cl_hdr - construct client hbm header + * + * @cl: client + * @hbm_cmd: host bus message command + * @buf: buffer for cl header + * @len: buffer length + */ +static inline +void mei_hbm_cl_hdr(struct mei_cl *cl, u8 hbm_cmd, void *buf, size_t len) +{ + struct mei_hbm_cl_cmd *cmd = buf; + + memset(cmd, 0, len); + + cmd->hbm_cmd = hbm_cmd; + cmd->host_addr = mei_cl_host_addr(cl); + cmd->me_addr = mei_cl_me_id(cl); +} + +/** + * mei_hbm_cl_write - write simple hbm client message + * + * @dev: the device structure + * @cl: client + * @hbm_cmd: host bus message command + * @buf: message buffer + * @len: buffer length + * + * Return: 0 on success, <0 on failure. + */ +static inline int mei_hbm_cl_write(struct mei_device *dev, struct mei_cl *cl, + u8 hbm_cmd, void *buf, size_t len) +{ + struct mei_msg_hdr mei_hdr; + + mei_hbm_hdr(&mei_hdr, len); + mei_hbm_cl_hdr(cl, hbm_cmd, buf, len); + + return mei_hbm_write_message(dev, &mei_hdr, buf); +} + +/** + * mei_hbm_cl_addr_equal - check if the client's and + * the message address match + * + * @cl: client + * @cmd: hbm client message + * + * Return: true if addresses are the same + */ +static inline +bool mei_hbm_cl_addr_equal(struct mei_cl *cl, struct mei_hbm_cl_cmd *cmd) +{ + return mei_cl_host_addr(cl) == cmd->host_addr && + mei_cl_me_id(cl) == cmd->me_addr; +} + +/** + * mei_hbm_cl_find_by_cmd - find recipient client + * + * @dev: the device structure + * @buf: a buffer with hbm cl command + * + * Return: the recipient client or NULL if not found + */ +static inline +struct mei_cl *mei_hbm_cl_find_by_cmd(struct mei_device *dev, void *buf) +{ + struct mei_hbm_cl_cmd *cmd = (struct mei_hbm_cl_cmd *)buf; + struct mei_cl *cl; + + list_for_each_entry(cl, &dev->file_list, link) + if (mei_hbm_cl_addr_equal(cl, cmd)) + return cl; + return NULL; +} + + +/** + * mei_hbm_start_wait - wait for start response message. + * + * @dev: the device structure + * + * Return: 0 on success and < 0 on failure + */ +int mei_hbm_start_wait(struct mei_device *dev) +{ + int ret; + + if (dev->hbm_state > MEI_HBM_STARTING) + return 0; + + mutex_unlock(&dev->device_lock); + ret = wait_event_timeout(dev->wait_hbm_start, + dev->hbm_state != MEI_HBM_STARTING, + dev->timeouts.hbm); + mutex_lock(&dev->device_lock); + + if (ret == 0 && (dev->hbm_state <= MEI_HBM_STARTING)) { + dev->hbm_state = MEI_HBM_IDLE; + dev_err(dev->dev, "waiting for mei start failed\n"); + return -ETIME; + } + return 0; +} + +/** + * mei_hbm_start_req - sends start request message. + * + * @dev: the device structure + * + * Return: 0 on success and < 0 on failure + */ +int mei_hbm_start_req(struct mei_device *dev) +{ + struct mei_msg_hdr mei_hdr; + struct hbm_host_version_request req; + int ret; + + mei_hbm_reset(dev); + + mei_hbm_hdr(&mei_hdr, sizeof(req)); + + /* host start message */ + memset(&req, 0, sizeof(req)); + req.hbm_cmd = HOST_START_REQ_CMD; + req.host_version.major_version = HBM_MAJOR_VERSION; + req.host_version.minor_version = HBM_MINOR_VERSION; + + dev->hbm_state = MEI_HBM_IDLE; + ret = mei_hbm_write_message(dev, &mei_hdr, &req); + if (ret) { + dev_err(dev->dev, "version message write failed: ret = %d\n", + ret); + return ret; + } + + dev->hbm_state = MEI_HBM_STARTING; + dev->init_clients_timer = dev->timeouts.client_init; + mei_schedule_stall_timer(dev); + return 0; +} + +/** + * mei_hbm_dma_setup_req() - setup DMA request + * @dev: the device structure + * + * Return: 0 on success and < 0 on failure + */ +static int mei_hbm_dma_setup_req(struct mei_device *dev) +{ + struct mei_msg_hdr mei_hdr; + struct hbm_dma_setup_request req; + unsigned int i; + int ret; + + mei_hbm_hdr(&mei_hdr, sizeof(req)); + + memset(&req, 0, sizeof(req)); + req.hbm_cmd = MEI_HBM_DMA_SETUP_REQ_CMD; + for (i = 0; i < DMA_DSCR_NUM; i++) { + phys_addr_t paddr; + + paddr = dev->dr_dscr[i].daddr; + req.dma_dscr[i].addr_hi = upper_32_bits(paddr); + req.dma_dscr[i].addr_lo = lower_32_bits(paddr); + req.dma_dscr[i].size = dev->dr_dscr[i].size; + } + + mei_dma_ring_reset(dev); + + ret = mei_hbm_write_message(dev, &mei_hdr, &req); + if (ret) { + dev_err(dev->dev, "dma setup request write failed: ret = %d.\n", + ret); + return ret; + } + + dev->hbm_state = MEI_HBM_DR_SETUP; + dev->init_clients_timer = dev->timeouts.client_init; + mei_schedule_stall_timer(dev); + return 0; +} + +/** + * mei_hbm_capabilities_req - request capabilities + * + * @dev: the device structure + * + * Return: 0 on success and < 0 on failure + */ +static int mei_hbm_capabilities_req(struct mei_device *dev) +{ + struct mei_msg_hdr mei_hdr; + struct hbm_capability_request req; + int ret; + + mei_hbm_hdr(&mei_hdr, sizeof(req)); + + memset(&req, 0, sizeof(req)); + req.hbm_cmd = MEI_HBM_CAPABILITIES_REQ_CMD; + if (dev->hbm_f_vt_supported) + req.capability_requested[0] |= HBM_CAP_VT; + + if (dev->hbm_f_cd_supported) + req.capability_requested[0] |= HBM_CAP_CD; + + if (dev->hbm_f_gsc_supported) + req.capability_requested[0] |= HBM_CAP_GSC; + + ret = mei_hbm_write_message(dev, &mei_hdr, &req); + if (ret) { + dev_err(dev->dev, + "capabilities request write failed: ret = %d.\n", ret); + return ret; + } + + dev->hbm_state = MEI_HBM_CAP_SETUP; + dev->init_clients_timer = dev->timeouts.client_init; + mei_schedule_stall_timer(dev); + return 0; +} + +/** + * mei_hbm_enum_clients_req - sends enumeration client request message. + * + * @dev: the device structure + * + * Return: 0 on success and < 0 on failure + */ +static int mei_hbm_enum_clients_req(struct mei_device *dev) +{ + struct mei_msg_hdr mei_hdr; + struct hbm_host_enum_request req; + int ret; + + /* enumerate clients */ + mei_hbm_hdr(&mei_hdr, sizeof(req)); + + memset(&req, 0, sizeof(req)); + req.hbm_cmd = HOST_ENUM_REQ_CMD; + req.flags |= dev->hbm_f_dc_supported ? MEI_HBM_ENUM_F_ALLOW_ADD : 0; + req.flags |= dev->hbm_f_ie_supported ? + MEI_HBM_ENUM_F_IMMEDIATE_ENUM : 0; + + ret = mei_hbm_write_message(dev, &mei_hdr, &req); + if (ret) { + dev_err(dev->dev, "enumeration request write failed: ret = %d.\n", + ret); + return ret; + } + dev->hbm_state = MEI_HBM_ENUM_CLIENTS; + dev->init_clients_timer = dev->timeouts.client_init; + mei_schedule_stall_timer(dev); + return 0; +} + +/** + * mei_hbm_me_cl_add - add new me client to the list + * + * @dev: the device structure + * @res: hbm property response + * + * Return: 0 on success and -ENOMEM on allocation failure + */ + +static int mei_hbm_me_cl_add(struct mei_device *dev, + struct hbm_props_response *res) +{ + struct mei_me_client *me_cl; + const uuid_le *uuid = &res->client_properties.protocol_name; + + mei_me_cl_rm_by_uuid(dev, uuid); + + me_cl = kzalloc(sizeof(*me_cl), GFP_KERNEL); + if (!me_cl) + return -ENOMEM; + + mei_me_cl_init(me_cl); + + me_cl->props = res->client_properties; + me_cl->client_id = res->me_addr; + me_cl->tx_flow_ctrl_creds = 0; + + mei_me_cl_add(dev, me_cl); + + return 0; +} + +/** + * mei_hbm_add_cl_resp - send response to fw on client add request + * + * @dev: the device structure + * @addr: me address + * @status: response status + * + * Return: 0 on success and < 0 on failure + */ +static int mei_hbm_add_cl_resp(struct mei_device *dev, u8 addr, u8 status) +{ + struct mei_msg_hdr mei_hdr; + struct hbm_add_client_response resp; + int ret; + + dev_dbg(dev->dev, "adding client response\n"); + + mei_hbm_hdr(&mei_hdr, sizeof(resp)); + + memset(&resp, 0, sizeof(resp)); + resp.hbm_cmd = MEI_HBM_ADD_CLIENT_RES_CMD; + resp.me_addr = addr; + resp.status = status; + + ret = mei_hbm_write_message(dev, &mei_hdr, &resp); + if (ret) + dev_err(dev->dev, "add client response write failed: ret = %d\n", + ret); + return ret; +} + +/** + * mei_hbm_fw_add_cl_req - request from the fw to add a client + * + * @dev: the device structure + * @req: add client request + * + * Return: 0 on success and < 0 on failure + */ +static int mei_hbm_fw_add_cl_req(struct mei_device *dev, + struct hbm_add_client_request *req) +{ + int ret; + u8 status = MEI_HBMS_SUCCESS; + + BUILD_BUG_ON(sizeof(struct hbm_add_client_request) != + sizeof(struct hbm_props_response)); + + ret = mei_hbm_me_cl_add(dev, (struct hbm_props_response *)req); + if (ret) + status = !MEI_HBMS_SUCCESS; + + if (dev->dev_state == MEI_DEV_ENABLED) + schedule_work(&dev->bus_rescan_work); + + return mei_hbm_add_cl_resp(dev, req->me_addr, status); +} + +/** + * mei_hbm_cl_notify_req - send notification request + * + * @dev: the device structure + * @cl: a client to disconnect from + * @start: true for start false for stop + * + * Return: 0 on success and -EIO on write failure + */ +int mei_hbm_cl_notify_req(struct mei_device *dev, + struct mei_cl *cl, u8 start) +{ + + struct mei_msg_hdr mei_hdr; + struct hbm_notification_request req; + int ret; + + mei_hbm_hdr(&mei_hdr, sizeof(req)); + mei_hbm_cl_hdr(cl, MEI_HBM_NOTIFY_REQ_CMD, &req, sizeof(req)); + + req.start = start; + + ret = mei_hbm_write_message(dev, &mei_hdr, &req); + if (ret) + dev_err(dev->dev, "notify request failed: ret = %d\n", ret); + + return ret; +} + +/** + * notify_res_to_fop - convert notification response to the proper + * notification FOP + * + * @cmd: client notification start response command + * + * Return: MEI_FOP_NOTIFY_START or MEI_FOP_NOTIFY_STOP; + */ +static inline enum mei_cb_file_ops notify_res_to_fop(struct mei_hbm_cl_cmd *cmd) +{ + struct hbm_notification_response *rs = + (struct hbm_notification_response *)cmd; + + return mei_cl_notify_req2fop(rs->start); +} + +/** + * mei_hbm_cl_notify_start_res - update the client state according + * notify start response + * + * @dev: the device structure + * @cl: mei host client + * @cmd: client notification start response command + */ +static void mei_hbm_cl_notify_start_res(struct mei_device *dev, + struct mei_cl *cl, + struct mei_hbm_cl_cmd *cmd) +{ + struct hbm_notification_response *rs = + (struct hbm_notification_response *)cmd; + + cl_dbg(dev, cl, "hbm: notify start response status=%d\n", rs->status); + + if (rs->status == MEI_HBMS_SUCCESS || + rs->status == MEI_HBMS_ALREADY_STARTED) { + cl->notify_en = true; + cl->status = 0; + } else { + cl->status = -EINVAL; + } +} + +/** + * mei_hbm_cl_notify_stop_res - update the client state according + * notify stop response + * + * @dev: the device structure + * @cl: mei host client + * @cmd: client notification stop response command + */ +static void mei_hbm_cl_notify_stop_res(struct mei_device *dev, + struct mei_cl *cl, + struct mei_hbm_cl_cmd *cmd) +{ + struct hbm_notification_response *rs = + (struct hbm_notification_response *)cmd; + + cl_dbg(dev, cl, "hbm: notify stop response status=%d\n", rs->status); + + if (rs->status == MEI_HBMS_SUCCESS || + rs->status == MEI_HBMS_NOT_STARTED) { + cl->notify_en = false; + cl->status = 0; + } else { + /* TODO: spec is not clear yet about other possible issues */ + cl->status = -EINVAL; + } +} + +/** + * mei_hbm_cl_notify - signal notification event + * + * @dev: the device structure + * @cmd: notification client message + */ +static void mei_hbm_cl_notify(struct mei_device *dev, + struct mei_hbm_cl_cmd *cmd) +{ + struct mei_cl *cl; + + cl = mei_hbm_cl_find_by_cmd(dev, cmd); + if (cl) + mei_cl_notify(cl); +} + +/** + * mei_hbm_cl_dma_map_req - send client dma map request + * + * @dev: the device structure + * @cl: mei host client + * + * Return: 0 on success and -EIO on write failure + */ +int mei_hbm_cl_dma_map_req(struct mei_device *dev, struct mei_cl *cl) +{ + struct mei_msg_hdr mei_hdr; + struct hbm_client_dma_map_request req; + int ret; + + mei_hbm_hdr(&mei_hdr, sizeof(req)); + + memset(&req, 0, sizeof(req)); + + req.hbm_cmd = MEI_HBM_CLIENT_DMA_MAP_REQ_CMD; + req.client_buffer_id = cl->dma.buffer_id; + req.address_lsb = lower_32_bits(cl->dma.daddr); + req.address_msb = upper_32_bits(cl->dma.daddr); + req.size = cl->dma.size; + + ret = mei_hbm_write_message(dev, &mei_hdr, &req); + if (ret) + dev_err(dev->dev, "dma map request failed: ret = %d\n", ret); + + return ret; +} + +/** + * mei_hbm_cl_dma_unmap_req - send client dma unmap request + * + * @dev: the device structure + * @cl: mei host client + * + * Return: 0 on success and -EIO on write failure + */ +int mei_hbm_cl_dma_unmap_req(struct mei_device *dev, struct mei_cl *cl) +{ + struct mei_msg_hdr mei_hdr; + struct hbm_client_dma_unmap_request req; + int ret; + + mei_hbm_hdr(&mei_hdr, sizeof(req)); + + memset(&req, 0, sizeof(req)); + + req.hbm_cmd = MEI_HBM_CLIENT_DMA_UNMAP_REQ_CMD; + req.client_buffer_id = cl->dma.buffer_id; + + ret = mei_hbm_write_message(dev, &mei_hdr, &req); + if (ret) + dev_err(dev->dev, "dma unmap request failed: ret = %d\n", ret); + + return ret; +} + +static void mei_hbm_cl_dma_map_res(struct mei_device *dev, + struct hbm_client_dma_response *res) +{ + struct mei_cl *cl; + struct mei_cl_cb *cb, *next; + + cl = NULL; + list_for_each_entry_safe(cb, next, &dev->ctrl_rd_list, list) { + if (cb->fop_type != MEI_FOP_DMA_MAP) + continue; + if (!cb->cl->dma.buffer_id || cb->cl->dma_mapped) + continue; + + cl = cb->cl; + break; + } + if (!cl) + return; + + if (res->status) { + dev_err(dev->dev, "cl dma map failed %d\n", res->status); + cl->status = -EFAULT; + } else { + dev_dbg(dev->dev, "cl dma map succeeded\n"); + cl->dma_mapped = 1; + cl->status = 0; + } + wake_up(&cl->wait); +} + +static void mei_hbm_cl_dma_unmap_res(struct mei_device *dev, + struct hbm_client_dma_response *res) +{ + struct mei_cl *cl; + struct mei_cl_cb *cb, *next; + + cl = NULL; + list_for_each_entry_safe(cb, next, &dev->ctrl_rd_list, list) { + if (cb->fop_type != MEI_FOP_DMA_UNMAP) + continue; + if (!cb->cl->dma.buffer_id || !cb->cl->dma_mapped) + continue; + + cl = cb->cl; + break; + } + if (!cl) + return; + + if (res->status) { + dev_err(dev->dev, "cl dma unmap failed %d\n", res->status); + cl->status = -EFAULT; + } else { + dev_dbg(dev->dev, "cl dma unmap succeeded\n"); + cl->dma_mapped = 0; + cl->status = 0; + } + wake_up(&cl->wait); +} + +/** + * mei_hbm_prop_req - request property for a single client + * + * @dev: the device structure + * @start_idx: client index to start search + * + * Return: 0 on success and < 0 on failure + */ +static int mei_hbm_prop_req(struct mei_device *dev, unsigned long start_idx) +{ + struct mei_msg_hdr mei_hdr; + struct hbm_props_request req; + unsigned long addr; + int ret; + + addr = find_next_bit(dev->me_clients_map, MEI_CLIENTS_MAX, start_idx); + + /* We got all client properties */ + if (addr == MEI_CLIENTS_MAX) { + dev->hbm_state = MEI_HBM_STARTED; + mei_host_client_init(dev); + return 0; + } + + mei_hbm_hdr(&mei_hdr, sizeof(req)); + + memset(&req, 0, sizeof(req)); + + req.hbm_cmd = HOST_CLIENT_PROPERTIES_REQ_CMD; + req.me_addr = addr; + + ret = mei_hbm_write_message(dev, &mei_hdr, &req); + if (ret) { + dev_err(dev->dev, "properties request write failed: ret = %d\n", + ret); + return ret; + } + + dev->init_clients_timer = dev->timeouts.client_init; + mei_schedule_stall_timer(dev); + + return 0; +} + +/** + * mei_hbm_pg - sends pg command + * + * @dev: the device structure + * @pg_cmd: the pg command code + * + * Return: -EIO on write failure + * -EOPNOTSUPP if the operation is not supported by the protocol + */ +int mei_hbm_pg(struct mei_device *dev, u8 pg_cmd) +{ + struct mei_msg_hdr mei_hdr; + struct hbm_power_gate req; + int ret; + + if (!dev->hbm_f_pg_supported) + return -EOPNOTSUPP; + + mei_hbm_hdr(&mei_hdr, sizeof(req)); + + memset(&req, 0, sizeof(req)); + req.hbm_cmd = pg_cmd; + + ret = mei_hbm_write_message(dev, &mei_hdr, &req); + if (ret) + dev_err(dev->dev, "power gate command write failed.\n"); + return ret; +} +EXPORT_SYMBOL_GPL(mei_hbm_pg); + +/** + * mei_hbm_stop_req - send stop request message + * + * @dev: mei device + * + * Return: -EIO on write failure + */ +static int mei_hbm_stop_req(struct mei_device *dev) +{ + struct mei_msg_hdr mei_hdr; + struct hbm_host_stop_request req; + + mei_hbm_hdr(&mei_hdr, sizeof(req)); + + memset(&req, 0, sizeof(req)); + req.hbm_cmd = HOST_STOP_REQ_CMD; + req.reason = DRIVER_STOP_REQUEST; + + return mei_hbm_write_message(dev, &mei_hdr, &req); +} + +/** + * mei_hbm_cl_flow_control_req - sends flow control request. + * + * @dev: the device structure + * @cl: client info + * + * Return: -EIO on write failure + */ +int mei_hbm_cl_flow_control_req(struct mei_device *dev, struct mei_cl *cl) +{ + struct hbm_flow_control req; + + cl_dbg(dev, cl, "sending flow control\n"); + return mei_hbm_cl_write(dev, cl, MEI_FLOW_CONTROL_CMD, + &req, sizeof(req)); +} + +/** + * mei_hbm_add_single_tx_flow_ctrl_creds - adds single buffer credentials. + * + * @dev: the device structure + * @fctrl: flow control response bus message + * + * Return: 0 on success, < 0 otherwise + */ +static int mei_hbm_add_single_tx_flow_ctrl_creds(struct mei_device *dev, + struct hbm_flow_control *fctrl) +{ + struct mei_me_client *me_cl; + int rets; + + me_cl = mei_me_cl_by_id(dev, fctrl->me_addr); + if (!me_cl) { + dev_err(dev->dev, "no such me client %d\n", fctrl->me_addr); + return -ENOENT; + } + + if (WARN_ON(me_cl->props.single_recv_buf == 0)) { + rets = -EINVAL; + goto out; + } + + me_cl->tx_flow_ctrl_creds++; + dev_dbg(dev->dev, "recv flow ctrl msg ME %d (single) creds = %d.\n", + fctrl->me_addr, me_cl->tx_flow_ctrl_creds); + + rets = 0; +out: + mei_me_cl_put(me_cl); + return rets; +} + +/** + * mei_hbm_cl_tx_flow_ctrl_creds_res - flow control response from me + * + * @dev: the device structure + * @fctrl: flow control response bus message + */ +static void mei_hbm_cl_tx_flow_ctrl_creds_res(struct mei_device *dev, + struct hbm_flow_control *fctrl) +{ + struct mei_cl *cl; + + if (!fctrl->host_addr) { + /* single receive buffer */ + mei_hbm_add_single_tx_flow_ctrl_creds(dev, fctrl); + return; + } + + cl = mei_hbm_cl_find_by_cmd(dev, fctrl); + if (cl) { + cl->tx_flow_ctrl_creds++; + cl_dbg(dev, cl, "flow control creds = %d.\n", + cl->tx_flow_ctrl_creds); + } +} + + +/** + * mei_hbm_cl_disconnect_req - sends disconnect message to fw. + * + * @dev: the device structure + * @cl: a client to disconnect from + * + * Return: -EIO on write failure + */ +int mei_hbm_cl_disconnect_req(struct mei_device *dev, struct mei_cl *cl) +{ + struct hbm_client_connect_request req; + + return mei_hbm_cl_write(dev, cl, CLIENT_DISCONNECT_REQ_CMD, + &req, sizeof(req)); +} + +/** + * mei_hbm_cl_disconnect_rsp - sends disconnect respose to the FW + * + * @dev: the device structure + * @cl: a client to disconnect from + * + * Return: -EIO on write failure + */ +int mei_hbm_cl_disconnect_rsp(struct mei_device *dev, struct mei_cl *cl) +{ + struct hbm_client_connect_response resp; + + return mei_hbm_cl_write(dev, cl, CLIENT_DISCONNECT_RES_CMD, + &resp, sizeof(resp)); +} + +/** + * mei_hbm_cl_disconnect_res - update the client state according + * disconnect response + * + * @dev: the device structure + * @cl: mei host client + * @cmd: disconnect client response host bus message + */ +static void mei_hbm_cl_disconnect_res(struct mei_device *dev, struct mei_cl *cl, + struct mei_hbm_cl_cmd *cmd) +{ + struct hbm_client_connect_response *rs = + (struct hbm_client_connect_response *)cmd; + + cl_dbg(dev, cl, "hbm: disconnect response status=%d\n", rs->status); + + if (rs->status == MEI_CL_DISCONN_SUCCESS) + cl->state = MEI_FILE_DISCONNECT_REPLY; + cl->status = 0; +} + +/** + * mei_hbm_cl_connect_req - send connection request to specific me client + * + * @dev: the device structure + * @cl: a client to connect to + * + * Return: -EIO on write failure + */ +int mei_hbm_cl_connect_req(struct mei_device *dev, struct mei_cl *cl) +{ + struct hbm_client_connect_request req; + + return mei_hbm_cl_write(dev, cl, CLIENT_CONNECT_REQ_CMD, + &req, sizeof(req)); +} + +/** + * mei_hbm_cl_connect_res - update the client state according + * connection response + * + * @dev: the device structure + * @cl: mei host client + * @cmd: connect client response host bus message + */ +static void mei_hbm_cl_connect_res(struct mei_device *dev, struct mei_cl *cl, + struct mei_hbm_cl_cmd *cmd) +{ + struct hbm_client_connect_response *rs = + (struct hbm_client_connect_response *)cmd; + + cl_dbg(dev, cl, "hbm: connect response status=%s\n", + mei_cl_conn_status_str(rs->status)); + + if (rs->status == MEI_CL_CONN_SUCCESS) + cl->state = MEI_FILE_CONNECTED; + else { + cl->state = MEI_FILE_DISCONNECT_REPLY; + if (rs->status == MEI_CL_CONN_NOT_FOUND) { + mei_me_cl_del(dev, cl->me_cl); + if (dev->dev_state == MEI_DEV_ENABLED) + schedule_work(&dev->bus_rescan_work); + } + } + cl->status = mei_cl_conn_status_to_errno(rs->status); +} + +/** + * mei_hbm_cl_res - process hbm response received on behalf + * an client + * + * @dev: the device structure + * @rs: hbm client message + * @fop_type: file operation type + */ +static void mei_hbm_cl_res(struct mei_device *dev, + struct mei_hbm_cl_cmd *rs, + enum mei_cb_file_ops fop_type) +{ + struct mei_cl *cl; + struct mei_cl_cb *cb, *next; + + cl = NULL; + list_for_each_entry_safe(cb, next, &dev->ctrl_rd_list, list) { + + cl = cb->cl; + + if (cb->fop_type != fop_type) + continue; + + if (mei_hbm_cl_addr_equal(cl, rs)) { + list_del_init(&cb->list); + break; + } + } + + if (!cl) + return; + + switch (fop_type) { + case MEI_FOP_CONNECT: + mei_hbm_cl_connect_res(dev, cl, rs); + break; + case MEI_FOP_DISCONNECT: + mei_hbm_cl_disconnect_res(dev, cl, rs); + break; + case MEI_FOP_NOTIFY_START: + mei_hbm_cl_notify_start_res(dev, cl, rs); + break; + case MEI_FOP_NOTIFY_STOP: + mei_hbm_cl_notify_stop_res(dev, cl, rs); + break; + default: + return; + } + + cl->timer_count = 0; + wake_up(&cl->wait); +} + + +/** + * mei_hbm_fw_disconnect_req - disconnect request initiated by ME firmware + * host sends disconnect response + * + * @dev: the device structure. + * @disconnect_req: disconnect request bus message from the me + * + * Return: -ENOMEM on allocation failure + */ +static int mei_hbm_fw_disconnect_req(struct mei_device *dev, + struct hbm_client_connect_request *disconnect_req) +{ + struct mei_cl *cl; + struct mei_cl_cb *cb; + + cl = mei_hbm_cl_find_by_cmd(dev, disconnect_req); + if (cl) { + cl_warn(dev, cl, "fw disconnect request received\n"); + cl->state = MEI_FILE_DISCONNECTING; + cl->timer_count = 0; + + cb = mei_cl_enqueue_ctrl_wr_cb(cl, 0, MEI_FOP_DISCONNECT_RSP, + NULL); + if (!cb) + return -ENOMEM; + } + return 0; +} + +/** + * mei_hbm_pg_enter_res - PG enter response received + * + * @dev: the device structure. + * + * Return: 0 on success, -EPROTO on state mismatch + */ +static int mei_hbm_pg_enter_res(struct mei_device *dev) +{ + if (mei_pg_state(dev) != MEI_PG_OFF || + dev->pg_event != MEI_PG_EVENT_WAIT) { + dev_err(dev->dev, "hbm: pg entry response: state mismatch [%s, %d]\n", + mei_pg_state_str(mei_pg_state(dev)), dev->pg_event); + return -EPROTO; + } + + dev->pg_event = MEI_PG_EVENT_RECEIVED; + wake_up(&dev->wait_pg); + + return 0; +} + +/** + * mei_hbm_pg_resume - process with PG resume + * + * @dev: the device structure. + */ +void mei_hbm_pg_resume(struct mei_device *dev) +{ + pm_request_resume(dev->dev); +} +EXPORT_SYMBOL_GPL(mei_hbm_pg_resume); + +/** + * mei_hbm_pg_exit_res - PG exit response received + * + * @dev: the device structure. + * + * Return: 0 on success, -EPROTO on state mismatch + */ +static int mei_hbm_pg_exit_res(struct mei_device *dev) +{ + if (mei_pg_state(dev) != MEI_PG_ON || + (dev->pg_event != MEI_PG_EVENT_WAIT && + dev->pg_event != MEI_PG_EVENT_IDLE)) { + dev_err(dev->dev, "hbm: pg exit response: state mismatch [%s, %d]\n", + mei_pg_state_str(mei_pg_state(dev)), dev->pg_event); + return -EPROTO; + } + + switch (dev->pg_event) { + case MEI_PG_EVENT_WAIT: + dev->pg_event = MEI_PG_EVENT_RECEIVED; + wake_up(&dev->wait_pg); + break; + case MEI_PG_EVENT_IDLE: + /* + * If the driver is not waiting on this then + * this is HW initiated exit from PG. + * Start runtime pm resume sequence to exit from PG. + */ + dev->pg_event = MEI_PG_EVENT_RECEIVED; + mei_hbm_pg_resume(dev); + break; + default: + WARN(1, "hbm: pg exit response: unexpected pg event = %d\n", + dev->pg_event); + return -EPROTO; + } + + return 0; +} + +/** + * mei_hbm_config_features - check what hbm features and commands + * are supported by the fw + * + * @dev: the device structure + */ +static void mei_hbm_config_features(struct mei_device *dev) +{ + /* Power Gating Isolation Support */ + dev->hbm_f_pg_supported = 0; + if (dev->version.major_version > HBM_MAJOR_VERSION_PGI) + dev->hbm_f_pg_supported = 1; + + if (dev->version.major_version == HBM_MAJOR_VERSION_PGI && + dev->version.minor_version >= HBM_MINOR_VERSION_PGI) + dev->hbm_f_pg_supported = 1; + + dev->hbm_f_dc_supported = 0; + if (dev->version.major_version >= HBM_MAJOR_VERSION_DC) + dev->hbm_f_dc_supported = 1; + + dev->hbm_f_ie_supported = 0; + if (dev->version.major_version >= HBM_MAJOR_VERSION_IE) + dev->hbm_f_ie_supported = 1; + + /* disconnect on connect timeout instead of link reset */ + dev->hbm_f_dot_supported = 0; + if (dev->version.major_version >= HBM_MAJOR_VERSION_DOT) + dev->hbm_f_dot_supported = 1; + + /* Notification Event Support */ + dev->hbm_f_ev_supported = 0; + if (dev->version.major_version >= HBM_MAJOR_VERSION_EV) + dev->hbm_f_ev_supported = 1; + + /* Fixed Address Client Support */ + dev->hbm_f_fa_supported = 0; + if (dev->version.major_version >= HBM_MAJOR_VERSION_FA) + dev->hbm_f_fa_supported = 1; + + /* OS ver message Support */ + dev->hbm_f_os_supported = 0; + if (dev->version.major_version >= HBM_MAJOR_VERSION_OS) + dev->hbm_f_os_supported = 1; + + /* DMA Ring Support */ + dev->hbm_f_dr_supported = 0; + if (dev->version.major_version > HBM_MAJOR_VERSION_DR || + (dev->version.major_version == HBM_MAJOR_VERSION_DR && + dev->version.minor_version >= HBM_MINOR_VERSION_DR)) + dev->hbm_f_dr_supported = 1; + + /* VTag Support */ + dev->hbm_f_vt_supported = 0; + if (dev->version.major_version > HBM_MAJOR_VERSION_VT || + (dev->version.major_version == HBM_MAJOR_VERSION_VT && + dev->version.minor_version >= HBM_MINOR_VERSION_VT)) + dev->hbm_f_vt_supported = 1; + + /* GSC support */ + if (dev->version.major_version > HBM_MAJOR_VERSION_GSC || + (dev->version.major_version == HBM_MAJOR_VERSION_GSC && + dev->version.minor_version >= HBM_MINOR_VERSION_GSC)) + dev->hbm_f_gsc_supported = 1; + + /* Capability message Support */ + dev->hbm_f_cap_supported = 0; + if (dev->version.major_version > HBM_MAJOR_VERSION_CAP || + (dev->version.major_version == HBM_MAJOR_VERSION_CAP && + dev->version.minor_version >= HBM_MINOR_VERSION_CAP)) + dev->hbm_f_cap_supported = 1; + + /* Client DMA Support */ + dev->hbm_f_cd_supported = 0; + if (dev->version.major_version > HBM_MAJOR_VERSION_CD || + (dev->version.major_version == HBM_MAJOR_VERSION_CD && + dev->version.minor_version >= HBM_MINOR_VERSION_CD)) + dev->hbm_f_cd_supported = 1; +} + +/** + * mei_hbm_version_is_supported - checks whether the driver can + * support the hbm version of the device + * + * @dev: the device structure + * Return: true if driver can support hbm version of the device + */ +bool mei_hbm_version_is_supported(struct mei_device *dev) +{ + return (dev->version.major_version < HBM_MAJOR_VERSION) || + (dev->version.major_version == HBM_MAJOR_VERSION && + dev->version.minor_version <= HBM_MINOR_VERSION); +} + +/** + * mei_hbm_dispatch - bottom half read routine after ISR to + * handle the read bus message cmd processing. + * + * @dev: the device structure + * @hdr: header of bus message + * + * Return: 0 on success and < 0 on failure + */ +int mei_hbm_dispatch(struct mei_device *dev, struct mei_msg_hdr *hdr) +{ + struct mei_bus_message *mei_msg; + struct hbm_host_version_response *version_res; + struct hbm_props_response *props_res; + struct hbm_host_enum_response *enum_res; + struct hbm_dma_setup_response *dma_setup_res; + struct hbm_add_client_request *add_cl_req; + struct hbm_capability_response *capability_res; + int ret; + + struct mei_hbm_cl_cmd *cl_cmd; + struct hbm_client_connect_request *disconnect_req; + struct hbm_flow_control *fctrl; + struct hbm_client_dma_response *client_dma_res; + + /* read the message to our buffer */ + BUG_ON(hdr->length >= sizeof(dev->rd_msg_buf)); + mei_read_slots(dev, dev->rd_msg_buf, hdr->length); + mei_msg = (struct mei_bus_message *)dev->rd_msg_buf; + cl_cmd = (struct mei_hbm_cl_cmd *)mei_msg; + + /* ignore spurious message and prevent reset nesting + * hbm is put to idle during system reset + */ + if (dev->hbm_state == MEI_HBM_IDLE) { + dev_dbg(dev->dev, "hbm: state is idle ignore spurious messages\n"); + return 0; + } + + switch (mei_msg->hbm_cmd) { + case HOST_START_RES_CMD: + dev_dbg(dev->dev, "hbm: start: response message received.\n"); + + dev->init_clients_timer = 0; + + version_res = (struct hbm_host_version_response *)mei_msg; + + dev_dbg(dev->dev, "HBM VERSION: DRIVER=%02d:%02d DEVICE=%02d:%02d\n", + HBM_MAJOR_VERSION, HBM_MINOR_VERSION, + version_res->me_max_version.major_version, + version_res->me_max_version.minor_version); + + if (version_res->host_version_supported) { + dev->version.major_version = HBM_MAJOR_VERSION; + dev->version.minor_version = HBM_MINOR_VERSION; + } else { + dev->version.major_version = + version_res->me_max_version.major_version; + dev->version.minor_version = + version_res->me_max_version.minor_version; + } + + if (!mei_hbm_version_is_supported(dev)) { + dev_warn(dev->dev, "hbm: start: version mismatch - stopping the driver.\n"); + + dev->hbm_state = MEI_HBM_STOPPED; + if (mei_hbm_stop_req(dev)) { + dev_err(dev->dev, "hbm: start: failed to send stop request\n"); + return -EIO; + } + break; + } + + mei_hbm_config_features(dev); + + if (dev->dev_state != MEI_DEV_INIT_CLIENTS || + dev->hbm_state != MEI_HBM_STARTING) { + if (dev->dev_state == MEI_DEV_POWER_DOWN || + dev->dev_state == MEI_DEV_POWERING_DOWN) { + dev_dbg(dev->dev, "hbm: start: on shutdown, ignoring\n"); + return 0; + } + dev_err(dev->dev, "hbm: start: state mismatch, [%d, %d]\n", + dev->dev_state, dev->hbm_state); + return -EPROTO; + } + + if (dev->hbm_f_cap_supported) { + if (mei_hbm_capabilities_req(dev)) + return -EIO; + wake_up(&dev->wait_hbm_start); + break; + } + + if (dev->hbm_f_dr_supported) { + if (mei_dmam_ring_alloc(dev)) + dev_info(dev->dev, "running w/o dma ring\n"); + if (mei_dma_ring_is_allocated(dev)) { + if (mei_hbm_dma_setup_req(dev)) + return -EIO; + + wake_up(&dev->wait_hbm_start); + break; + } + } + + dev->hbm_f_dr_supported = 0; + mei_dmam_ring_free(dev); + + if (mei_hbm_enum_clients_req(dev)) + return -EIO; + + wake_up(&dev->wait_hbm_start); + break; + + case MEI_HBM_CAPABILITIES_RES_CMD: + dev_dbg(dev->dev, "hbm: capabilities response: message received.\n"); + + dev->init_clients_timer = 0; + + if (dev->dev_state != MEI_DEV_INIT_CLIENTS || + dev->hbm_state != MEI_HBM_CAP_SETUP) { + if (dev->dev_state == MEI_DEV_POWER_DOWN || + dev->dev_state == MEI_DEV_POWERING_DOWN) { + dev_dbg(dev->dev, "hbm: capabilities response: on shutdown, ignoring\n"); + return 0; + } + dev_err(dev->dev, "hbm: capabilities response: state mismatch, [%d, %d]\n", + dev->dev_state, dev->hbm_state); + return -EPROTO; + } + + capability_res = (struct hbm_capability_response *)mei_msg; + if (!(capability_res->capability_granted[0] & HBM_CAP_VT)) + dev->hbm_f_vt_supported = 0; + if (!(capability_res->capability_granted[0] & HBM_CAP_CD)) + dev->hbm_f_cd_supported = 0; + + if (!(capability_res->capability_granted[0] & HBM_CAP_GSC)) + dev->hbm_f_gsc_supported = 0; + + if (dev->hbm_f_dr_supported) { + if (mei_dmam_ring_alloc(dev)) + dev_info(dev->dev, "running w/o dma ring\n"); + if (mei_dma_ring_is_allocated(dev)) { + if (mei_hbm_dma_setup_req(dev)) + return -EIO; + break; + } + } + + dev->hbm_f_dr_supported = 0; + mei_dmam_ring_free(dev); + + if (mei_hbm_enum_clients_req(dev)) + return -EIO; + break; + + case MEI_HBM_DMA_SETUP_RES_CMD: + dev_dbg(dev->dev, "hbm: dma setup response: message received.\n"); + + dev->init_clients_timer = 0; + + if (dev->dev_state != MEI_DEV_INIT_CLIENTS || + dev->hbm_state != MEI_HBM_DR_SETUP) { + if (dev->dev_state == MEI_DEV_POWER_DOWN || + dev->dev_state == MEI_DEV_POWERING_DOWN) { + dev_dbg(dev->dev, "hbm: dma setup response: on shutdown, ignoring\n"); + return 0; + } + dev_err(dev->dev, "hbm: dma setup response: state mismatch, [%d, %d]\n", + dev->dev_state, dev->hbm_state); + return -EPROTO; + } + + dma_setup_res = (struct hbm_dma_setup_response *)mei_msg; + + if (dma_setup_res->status) { + u8 status = dma_setup_res->status; + + if (status == MEI_HBMS_NOT_ALLOWED) { + dev_dbg(dev->dev, "hbm: dma setup not allowed\n"); + } else { + dev_info(dev->dev, "hbm: dma setup response: failure = %d %s\n", + status, + mei_hbm_status_str(status)); + } + dev->hbm_f_dr_supported = 0; + mei_dmam_ring_free(dev); + } + + if (mei_hbm_enum_clients_req(dev)) + return -EIO; + break; + + case CLIENT_CONNECT_RES_CMD: + dev_dbg(dev->dev, "hbm: client connect response: message received.\n"); + mei_hbm_cl_res(dev, cl_cmd, MEI_FOP_CONNECT); + break; + + case CLIENT_DISCONNECT_RES_CMD: + dev_dbg(dev->dev, "hbm: client disconnect response: message received.\n"); + mei_hbm_cl_res(dev, cl_cmd, MEI_FOP_DISCONNECT); + break; + + case MEI_FLOW_CONTROL_CMD: + dev_dbg(dev->dev, "hbm: client flow control response: message received.\n"); + + fctrl = (struct hbm_flow_control *)mei_msg; + mei_hbm_cl_tx_flow_ctrl_creds_res(dev, fctrl); + break; + + case MEI_PG_ISOLATION_ENTRY_RES_CMD: + dev_dbg(dev->dev, "hbm: power gate isolation entry response received\n"); + ret = mei_hbm_pg_enter_res(dev); + if (ret) + return ret; + break; + + case MEI_PG_ISOLATION_EXIT_REQ_CMD: + dev_dbg(dev->dev, "hbm: power gate isolation exit request received\n"); + ret = mei_hbm_pg_exit_res(dev); + if (ret) + return ret; + break; + + case HOST_CLIENT_PROPERTIES_RES_CMD: + dev_dbg(dev->dev, "hbm: properties response: message received.\n"); + + dev->init_clients_timer = 0; + + if (dev->dev_state != MEI_DEV_INIT_CLIENTS || + dev->hbm_state != MEI_HBM_CLIENT_PROPERTIES) { + if (dev->dev_state == MEI_DEV_POWER_DOWN || + dev->dev_state == MEI_DEV_POWERING_DOWN) { + dev_dbg(dev->dev, "hbm: properties response: on shutdown, ignoring\n"); + return 0; + } + dev_err(dev->dev, "hbm: properties response: state mismatch, [%d, %d]\n", + dev->dev_state, dev->hbm_state); + return -EPROTO; + } + + props_res = (struct hbm_props_response *)mei_msg; + + if (props_res->status == MEI_HBMS_CLIENT_NOT_FOUND) { + dev_dbg(dev->dev, "hbm: properties response: %d CLIENT_NOT_FOUND\n", + props_res->me_addr); + } else if (props_res->status) { + dev_err(dev->dev, "hbm: properties response: wrong status = %d %s\n", + props_res->status, + mei_hbm_status_str(props_res->status)); + return -EPROTO; + } else { + mei_hbm_me_cl_add(dev, props_res); + } + + /* request property for the next client */ + if (mei_hbm_prop_req(dev, props_res->me_addr + 1)) + return -EIO; + + break; + + case HOST_ENUM_RES_CMD: + dev_dbg(dev->dev, "hbm: enumeration response: message received\n"); + + dev->init_clients_timer = 0; + + enum_res = (struct hbm_host_enum_response *) mei_msg; + BUILD_BUG_ON(sizeof(dev->me_clients_map) + < sizeof(enum_res->valid_addresses)); + memcpy(dev->me_clients_map, enum_res->valid_addresses, + sizeof(enum_res->valid_addresses)); + + if (dev->dev_state != MEI_DEV_INIT_CLIENTS || + dev->hbm_state != MEI_HBM_ENUM_CLIENTS) { + if (dev->dev_state == MEI_DEV_POWER_DOWN || + dev->dev_state == MEI_DEV_POWERING_DOWN) { + dev_dbg(dev->dev, "hbm: enumeration response: on shutdown, ignoring\n"); + return 0; + } + dev_err(dev->dev, "hbm: enumeration response: state mismatch, [%d, %d]\n", + dev->dev_state, dev->hbm_state); + return -EPROTO; + } + + dev->hbm_state = MEI_HBM_CLIENT_PROPERTIES; + + /* first property request */ + if (mei_hbm_prop_req(dev, 0)) + return -EIO; + + break; + + case HOST_STOP_RES_CMD: + dev_dbg(dev->dev, "hbm: stop response: message received\n"); + + dev->init_clients_timer = 0; + + if (dev->hbm_state != MEI_HBM_STOPPED) { + dev_err(dev->dev, "hbm: stop response: state mismatch, [%d, %d]\n", + dev->dev_state, dev->hbm_state); + return -EPROTO; + } + + mei_set_devstate(dev, MEI_DEV_POWER_DOWN); + dev_info(dev->dev, "hbm: stop response: resetting.\n"); + /* force the reset */ + return -EPROTO; + + case CLIENT_DISCONNECT_REQ_CMD: + dev_dbg(dev->dev, "hbm: disconnect request: message received\n"); + + disconnect_req = (struct hbm_client_connect_request *)mei_msg; + mei_hbm_fw_disconnect_req(dev, disconnect_req); + break; + + case ME_STOP_REQ_CMD: + dev_dbg(dev->dev, "hbm: stop request: message received\n"); + dev->hbm_state = MEI_HBM_STOPPED; + if (mei_hbm_stop_req(dev)) { + dev_err(dev->dev, "hbm: stop request: failed to send stop request\n"); + return -EIO; + } + break; + + case MEI_HBM_ADD_CLIENT_REQ_CMD: + dev_dbg(dev->dev, "hbm: add client request received\n"); + /* + * after the host receives the enum_resp + * message clients may be added or removed + */ + if (dev->hbm_state <= MEI_HBM_ENUM_CLIENTS || + dev->hbm_state >= MEI_HBM_STOPPED) { + dev_err(dev->dev, "hbm: add client: state mismatch, [%d, %d]\n", + dev->dev_state, dev->hbm_state); + return -EPROTO; + } + add_cl_req = (struct hbm_add_client_request *)mei_msg; + ret = mei_hbm_fw_add_cl_req(dev, add_cl_req); + if (ret) { + dev_err(dev->dev, "hbm: add client: failed to send response %d\n", + ret); + return -EIO; + } + dev_dbg(dev->dev, "hbm: add client request processed\n"); + break; + + case MEI_HBM_NOTIFY_RES_CMD: + dev_dbg(dev->dev, "hbm: notify response received\n"); + mei_hbm_cl_res(dev, cl_cmd, notify_res_to_fop(cl_cmd)); + break; + + case MEI_HBM_NOTIFICATION_CMD: + dev_dbg(dev->dev, "hbm: notification\n"); + mei_hbm_cl_notify(dev, cl_cmd); + break; + + case MEI_HBM_CLIENT_DMA_MAP_RES_CMD: + dev_dbg(dev->dev, "hbm: client dma map response: message received.\n"); + client_dma_res = (struct hbm_client_dma_response *)mei_msg; + mei_hbm_cl_dma_map_res(dev, client_dma_res); + break; + + case MEI_HBM_CLIENT_DMA_UNMAP_RES_CMD: + dev_dbg(dev->dev, "hbm: client dma unmap response: message received.\n"); + client_dma_res = (struct hbm_client_dma_response *)mei_msg; + mei_hbm_cl_dma_unmap_res(dev, client_dma_res); + break; + + default: + WARN(1, "hbm: wrong command %d\n", mei_msg->hbm_cmd); + return -EPROTO; + + } + return 0; +} + diff --git a/drivers/misc/mei/hbm.h b/drivers/misc/mei/hbm.h new file mode 100644 index 0000000000..cd5b08ca34 --- /dev/null +++ b/drivers/misc/mei/hbm.h @@ -0,0 +1,58 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (c) 2003-2018, Intel Corporation. All rights reserved. + * Intel Management Engine Interface (Intel MEI) Linux driver + */ + +#ifndef _MEI_HBM_H_ +#define _MEI_HBM_H_ + +struct mei_device; +struct mei_msg_hdr; +struct mei_cl; +struct mei_dma_data; + +/** + * enum mei_hbm_state - host bus message protocol state + * + * @MEI_HBM_IDLE : protocol not started + * @MEI_HBM_STARTING : start request message was sent + * @MEI_HBM_CAP_SETUP : capabilities request message was sent + * @MEI_HBM_DR_SETUP : dma ring setup request message was sent + * @MEI_HBM_ENUM_CLIENTS : enumeration request was sent + * @MEI_HBM_CLIENT_PROPERTIES : acquiring clients properties + * @MEI_HBM_STARTED : enumeration was completed + * @MEI_HBM_STOPPED : stopping exchange + */ +enum mei_hbm_state { + MEI_HBM_IDLE = 0, + MEI_HBM_STARTING, + MEI_HBM_CAP_SETUP, + MEI_HBM_DR_SETUP, + MEI_HBM_ENUM_CLIENTS, + MEI_HBM_CLIENT_PROPERTIES, + MEI_HBM_STARTED, + MEI_HBM_STOPPED, +}; + +const char *mei_hbm_state_str(enum mei_hbm_state state); + +int mei_hbm_dispatch(struct mei_device *dev, struct mei_msg_hdr *hdr); + +void mei_hbm_idle(struct mei_device *dev); +void mei_hbm_reset(struct mei_device *dev); +int mei_hbm_start_req(struct mei_device *dev); +int mei_hbm_start_wait(struct mei_device *dev); +int mei_hbm_cl_flow_control_req(struct mei_device *dev, struct mei_cl *cl); +int mei_hbm_cl_disconnect_req(struct mei_device *dev, struct mei_cl *cl); +int mei_hbm_cl_disconnect_rsp(struct mei_device *dev, struct mei_cl *cl); +int mei_hbm_cl_connect_req(struct mei_device *dev, struct mei_cl *cl); +bool mei_hbm_version_is_supported(struct mei_device *dev); +int mei_hbm_pg(struct mei_device *dev, u8 pg_cmd); +void mei_hbm_pg_resume(struct mei_device *dev); +int mei_hbm_cl_notify_req(struct mei_device *dev, + struct mei_cl *cl, u8 request); +int mei_hbm_cl_dma_map_req(struct mei_device *dev, struct mei_cl *cl); +int mei_hbm_cl_dma_unmap_req(struct mei_device *dev, struct mei_cl *cl); +#endif /* _MEI_HBM_H_ */ + diff --git a/drivers/misc/mei/hdcp/Kconfig b/drivers/misc/mei/hdcp/Kconfig new file mode 100644 index 0000000000..54e1c95269 --- /dev/null +++ b/drivers/misc/mei/hdcp/Kconfig @@ -0,0 +1,12 @@ +# SPDX-License-Identifier: GPL-2.0 +# Copyright (c) 2019, Intel Corporation. All rights reserved. +# +config INTEL_MEI_HDCP + tristate "Intel HDCP2.2 services of ME Interface" + select INTEL_MEI_ME + depends on DRM_I915 + help + MEI Support for HDCP2.2 Services on Intel platforms. + + Enables the ME FW services required for HDCP2.2 support through + I915 display driver of Intel. diff --git a/drivers/misc/mei/hdcp/Makefile b/drivers/misc/mei/hdcp/Makefile new file mode 100644 index 0000000000..3fbb56485c --- /dev/null +++ b/drivers/misc/mei/hdcp/Makefile @@ -0,0 +1,7 @@ +# SPDX-License-Identifier: GPL-2.0 +# +# Copyright (c) 2019, Intel Corporation. All rights reserved. +# +# Makefile - HDCP client driver for Intel MEI Bus Driver. + +obj-$(CONFIG_INTEL_MEI_HDCP) += mei_hdcp.o diff --git a/drivers/misc/mei/hdcp/mei_hdcp.c b/drivers/misc/mei/hdcp/mei_hdcp.c new file mode 100644 index 0000000000..51359cc5ec --- /dev/null +++ b/drivers/misc/mei/hdcp/mei_hdcp.c @@ -0,0 +1,879 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright © 2019 Intel Corporation + * + * mei_hdcp.c: HDCP client driver for mei bus + * + * Author: + * Ramalingam C <ramalingam.c@intel.com> + */ + +/** + * DOC: MEI_HDCP Client Driver + * + * The mei_hdcp driver acts as a translation layer between HDCP 2.2 + * protocol implementer (I915) and ME FW by translating HDCP2.2 + * negotiation messages to ME FW command payloads and vice versa. + */ + +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/mei.h> +#include <linux/mei_cl_bus.h> +#include <linux/component.h> +#include <drm/drm_connector.h> +#include <drm/i915_component.h> +#include <drm/i915_hdcp_interface.h> + +#include "mei_hdcp.h" + +/** + * mei_hdcp_initiate_session() - Initiate a Wired HDCP2.2 Tx Session in ME FW + * @dev: device corresponding to the mei_cl_device + * @data: Intel HW specific hdcp data + * @ake_data: AKE_Init msg output. + * + * Return: 0 on Success, <0 on Failure. + */ +static int +mei_hdcp_initiate_session(struct device *dev, struct hdcp_port_data *data, + struct hdcp2_ake_init *ake_data) +{ + struct wired_cmd_initiate_hdcp2_session_in session_init_in = { { 0 } }; + struct wired_cmd_initiate_hdcp2_session_out + session_init_out = { { 0 } }; + struct mei_cl_device *cldev; + ssize_t byte; + + if (!dev || !data || !ake_data) + return -EINVAL; + + cldev = to_mei_cl_device(dev); + + session_init_in.header.api_version = HDCP_API_VERSION; + session_init_in.header.command_id = WIRED_INITIATE_HDCP2_SESSION; + session_init_in.header.status = FW_HDCP_STATUS_SUCCESS; + session_init_in.header.buffer_len = + WIRED_CMD_BUF_LEN_INITIATE_HDCP2_SESSION_IN; + + session_init_in.port.integrated_port_type = data->port_type; + session_init_in.port.physical_port = (u8)data->hdcp_ddi; + session_init_in.port.attached_transcoder = (u8)data->hdcp_transcoder; + session_init_in.protocol = data->protocol; + + byte = mei_cldev_send(cldev, (u8 *)&session_init_in, + sizeof(session_init_in)); + if (byte < 0) { + dev_dbg(dev, "mei_cldev_send failed. %zd\n", byte); + return byte; + } + + byte = mei_cldev_recv(cldev, (u8 *)&session_init_out, + sizeof(session_init_out)); + if (byte < 0) { + dev_dbg(dev, "mei_cldev_recv failed. %zd\n", byte); + return byte; + } + + if (session_init_out.header.status != FW_HDCP_STATUS_SUCCESS) { + dev_dbg(dev, "ME cmd 0x%08X Failed. Status: 0x%X\n", + WIRED_INITIATE_HDCP2_SESSION, + session_init_out.header.status); + return -EIO; + } + + ake_data->msg_id = HDCP_2_2_AKE_INIT; + ake_data->tx_caps = session_init_out.tx_caps; + memcpy(ake_data->r_tx, session_init_out.r_tx, HDCP_2_2_RTX_LEN); + + return 0; +} + +/** + * mei_hdcp_verify_receiver_cert_prepare_km() - Verify the Receiver Certificate + * AKE_Send_Cert and prepare AKE_Stored_Km/AKE_No_Stored_Km + * @dev: device corresponding to the mei_cl_device + * @data: Intel HW specific hdcp data + * @rx_cert: AKE_Send_Cert for verification + * @km_stored: Pairing status flag output + * @ek_pub_km: AKE_Stored_Km/AKE_No_Stored_Km output msg + * @msg_sz : size of AKE_XXXXX_Km output msg + * + * Return: 0 on Success, <0 on Failure + */ +static int +mei_hdcp_verify_receiver_cert_prepare_km(struct device *dev, + struct hdcp_port_data *data, + struct hdcp2_ake_send_cert *rx_cert, + bool *km_stored, + struct hdcp2_ake_no_stored_km + *ek_pub_km, + size_t *msg_sz) +{ + struct wired_cmd_verify_receiver_cert_in verify_rxcert_in = { { 0 } }; + struct wired_cmd_verify_receiver_cert_out verify_rxcert_out = { { 0 } }; + struct mei_cl_device *cldev; + ssize_t byte; + + if (!dev || !data || !rx_cert || !km_stored || !ek_pub_km || !msg_sz) + return -EINVAL; + + cldev = to_mei_cl_device(dev); + + verify_rxcert_in.header.api_version = HDCP_API_VERSION; + verify_rxcert_in.header.command_id = WIRED_VERIFY_RECEIVER_CERT; + verify_rxcert_in.header.status = FW_HDCP_STATUS_SUCCESS; + verify_rxcert_in.header.buffer_len = + WIRED_CMD_BUF_LEN_VERIFY_RECEIVER_CERT_IN; + + verify_rxcert_in.port.integrated_port_type = data->port_type; + verify_rxcert_in.port.physical_port = (u8)data->hdcp_ddi; + verify_rxcert_in.port.attached_transcoder = (u8)data->hdcp_transcoder; + + verify_rxcert_in.cert_rx = rx_cert->cert_rx; + memcpy(verify_rxcert_in.r_rx, &rx_cert->r_rx, HDCP_2_2_RRX_LEN); + memcpy(verify_rxcert_in.rx_caps, rx_cert->rx_caps, HDCP_2_2_RXCAPS_LEN); + + byte = mei_cldev_send(cldev, (u8 *)&verify_rxcert_in, + sizeof(verify_rxcert_in)); + if (byte < 0) { + dev_dbg(dev, "mei_cldev_send failed: %zd\n", byte); + return byte; + } + + byte = mei_cldev_recv(cldev, (u8 *)&verify_rxcert_out, + sizeof(verify_rxcert_out)); + if (byte < 0) { + dev_dbg(dev, "mei_cldev_recv failed: %zd\n", byte); + return byte; + } + + if (verify_rxcert_out.header.status != FW_HDCP_STATUS_SUCCESS) { + dev_dbg(dev, "ME cmd 0x%08X Failed. Status: 0x%X\n", + WIRED_VERIFY_RECEIVER_CERT, + verify_rxcert_out.header.status); + return -EIO; + } + + *km_stored = !!verify_rxcert_out.km_stored; + if (verify_rxcert_out.km_stored) { + ek_pub_km->msg_id = HDCP_2_2_AKE_STORED_KM; + *msg_sz = sizeof(struct hdcp2_ake_stored_km); + } else { + ek_pub_km->msg_id = HDCP_2_2_AKE_NO_STORED_KM; + *msg_sz = sizeof(struct hdcp2_ake_no_stored_km); + } + + memcpy(ek_pub_km->e_kpub_km, &verify_rxcert_out.ekm_buff, + sizeof(verify_rxcert_out.ekm_buff)); + + return 0; +} + +/** + * mei_hdcp_verify_hprime() - Verify AKE_Send_H_prime at ME FW. + * @dev: device corresponding to the mei_cl_device + * @data: Intel HW specific hdcp data + * @rx_hprime: AKE_Send_H_prime msg for ME FW verification + * + * Return: 0 on Success, <0 on Failure + */ +static int +mei_hdcp_verify_hprime(struct device *dev, struct hdcp_port_data *data, + struct hdcp2_ake_send_hprime *rx_hprime) +{ + struct wired_cmd_ake_send_hprime_in send_hprime_in = { { 0 } }; + struct wired_cmd_ake_send_hprime_out send_hprime_out = { { 0 } }; + struct mei_cl_device *cldev; + ssize_t byte; + + if (!dev || !data || !rx_hprime) + return -EINVAL; + + cldev = to_mei_cl_device(dev); + + send_hprime_in.header.api_version = HDCP_API_VERSION; + send_hprime_in.header.command_id = WIRED_AKE_SEND_HPRIME; + send_hprime_in.header.status = FW_HDCP_STATUS_SUCCESS; + send_hprime_in.header.buffer_len = WIRED_CMD_BUF_LEN_AKE_SEND_HPRIME_IN; + + send_hprime_in.port.integrated_port_type = data->port_type; + send_hprime_in.port.physical_port = (u8)data->hdcp_ddi; + send_hprime_in.port.attached_transcoder = (u8)data->hdcp_transcoder; + + memcpy(send_hprime_in.h_prime, rx_hprime->h_prime, + HDCP_2_2_H_PRIME_LEN); + + byte = mei_cldev_send(cldev, (u8 *)&send_hprime_in, + sizeof(send_hprime_in)); + if (byte < 0) { + dev_dbg(dev, "mei_cldev_send failed. %zd\n", byte); + return byte; + } + + byte = mei_cldev_recv(cldev, (u8 *)&send_hprime_out, + sizeof(send_hprime_out)); + if (byte < 0) { + dev_dbg(dev, "mei_cldev_recv failed. %zd\n", byte); + return byte; + } + + if (send_hprime_out.header.status != FW_HDCP_STATUS_SUCCESS) { + dev_dbg(dev, "ME cmd 0x%08X Failed. Status: 0x%X\n", + WIRED_AKE_SEND_HPRIME, send_hprime_out.header.status); + return -EIO; + } + + return 0; +} + +/** + * mei_hdcp_store_pairing_info() - Store pairing info received at ME FW + * @dev: device corresponding to the mei_cl_device + * @data: Intel HW specific hdcp data + * @pairing_info: AKE_Send_Pairing_Info msg input to ME FW + * + * Return: 0 on Success, <0 on Failure + */ +static int +mei_hdcp_store_pairing_info(struct device *dev, struct hdcp_port_data *data, + struct hdcp2_ake_send_pairing_info *pairing_info) +{ + struct wired_cmd_ake_send_pairing_info_in pairing_info_in = { { 0 } }; + struct wired_cmd_ake_send_pairing_info_out pairing_info_out = { { 0 } }; + struct mei_cl_device *cldev; + ssize_t byte; + + if (!dev || !data || !pairing_info) + return -EINVAL; + + cldev = to_mei_cl_device(dev); + + pairing_info_in.header.api_version = HDCP_API_VERSION; + pairing_info_in.header.command_id = WIRED_AKE_SEND_PAIRING_INFO; + pairing_info_in.header.status = FW_HDCP_STATUS_SUCCESS; + pairing_info_in.header.buffer_len = + WIRED_CMD_BUF_LEN_SEND_PAIRING_INFO_IN; + + pairing_info_in.port.integrated_port_type = data->port_type; + pairing_info_in.port.physical_port = (u8)data->hdcp_ddi; + pairing_info_in.port.attached_transcoder = (u8)data->hdcp_transcoder; + + memcpy(pairing_info_in.e_kh_km, pairing_info->e_kh_km, + HDCP_2_2_E_KH_KM_LEN); + + byte = mei_cldev_send(cldev, (u8 *)&pairing_info_in, + sizeof(pairing_info_in)); + if (byte < 0) { + dev_dbg(dev, "mei_cldev_send failed. %zd\n", byte); + return byte; + } + + byte = mei_cldev_recv(cldev, (u8 *)&pairing_info_out, + sizeof(pairing_info_out)); + if (byte < 0) { + dev_dbg(dev, "mei_cldev_recv failed. %zd\n", byte); + return byte; + } + + if (pairing_info_out.header.status != FW_HDCP_STATUS_SUCCESS) { + dev_dbg(dev, "ME cmd 0x%08X failed. Status: 0x%X\n", + WIRED_AKE_SEND_PAIRING_INFO, + pairing_info_out.header.status); + return -EIO; + } + + return 0; +} + +/** + * mei_hdcp_initiate_locality_check() - Prepare LC_Init + * @dev: device corresponding to the mei_cl_device + * @data: Intel HW specific hdcp data + * @lc_init_data: LC_Init msg output + * + * Return: 0 on Success, <0 on Failure + */ +static int +mei_hdcp_initiate_locality_check(struct device *dev, + struct hdcp_port_data *data, + struct hdcp2_lc_init *lc_init_data) +{ + struct wired_cmd_init_locality_check_in lc_init_in = { { 0 } }; + struct wired_cmd_init_locality_check_out lc_init_out = { { 0 } }; + struct mei_cl_device *cldev; + ssize_t byte; + + if (!dev || !data || !lc_init_data) + return -EINVAL; + + cldev = to_mei_cl_device(dev); + + lc_init_in.header.api_version = HDCP_API_VERSION; + lc_init_in.header.command_id = WIRED_INIT_LOCALITY_CHECK; + lc_init_in.header.status = FW_HDCP_STATUS_SUCCESS; + lc_init_in.header.buffer_len = WIRED_CMD_BUF_LEN_INIT_LOCALITY_CHECK_IN; + + lc_init_in.port.integrated_port_type = data->port_type; + lc_init_in.port.physical_port = (u8)data->hdcp_ddi; + lc_init_in.port.attached_transcoder = (u8)data->hdcp_transcoder; + + byte = mei_cldev_send(cldev, (u8 *)&lc_init_in, sizeof(lc_init_in)); + if (byte < 0) { + dev_dbg(dev, "mei_cldev_send failed. %zd\n", byte); + return byte; + } + + byte = mei_cldev_recv(cldev, (u8 *)&lc_init_out, sizeof(lc_init_out)); + if (byte < 0) { + dev_dbg(dev, "mei_cldev_recv failed. %zd\n", byte); + return byte; + } + + if (lc_init_out.header.status != FW_HDCP_STATUS_SUCCESS) { + dev_dbg(dev, "ME cmd 0x%08X Failed. status: 0x%X\n", + WIRED_INIT_LOCALITY_CHECK, lc_init_out.header.status); + return -EIO; + } + + lc_init_data->msg_id = HDCP_2_2_LC_INIT; + memcpy(lc_init_data->r_n, lc_init_out.r_n, HDCP_2_2_RN_LEN); + + return 0; +} + +/** + * mei_hdcp_verify_lprime() - Verify lprime. + * @dev: device corresponding to the mei_cl_device + * @data: Intel HW specific hdcp data + * @rx_lprime: LC_Send_L_prime msg for ME FW verification + * + * Return: 0 on Success, <0 on Failure + */ +static int +mei_hdcp_verify_lprime(struct device *dev, struct hdcp_port_data *data, + struct hdcp2_lc_send_lprime *rx_lprime) +{ + struct wired_cmd_validate_locality_in verify_lprime_in = { { 0 } }; + struct wired_cmd_validate_locality_out verify_lprime_out = { { 0 } }; + struct mei_cl_device *cldev; + ssize_t byte; + + if (!dev || !data || !rx_lprime) + return -EINVAL; + + cldev = to_mei_cl_device(dev); + + verify_lprime_in.header.api_version = HDCP_API_VERSION; + verify_lprime_in.header.command_id = WIRED_VALIDATE_LOCALITY; + verify_lprime_in.header.status = FW_HDCP_STATUS_SUCCESS; + verify_lprime_in.header.buffer_len = + WIRED_CMD_BUF_LEN_VALIDATE_LOCALITY_IN; + + verify_lprime_in.port.integrated_port_type = data->port_type; + verify_lprime_in.port.physical_port = (u8)data->hdcp_ddi; + verify_lprime_in.port.attached_transcoder = (u8)data->hdcp_transcoder; + + memcpy(verify_lprime_in.l_prime, rx_lprime->l_prime, + HDCP_2_2_L_PRIME_LEN); + + byte = mei_cldev_send(cldev, (u8 *)&verify_lprime_in, + sizeof(verify_lprime_in)); + if (byte < 0) { + dev_dbg(dev, "mei_cldev_send failed. %zd\n", byte); + return byte; + } + + byte = mei_cldev_recv(cldev, (u8 *)&verify_lprime_out, + sizeof(verify_lprime_out)); + if (byte < 0) { + dev_dbg(dev, "mei_cldev_recv failed. %zd\n", byte); + return byte; + } + + if (verify_lprime_out.header.status != FW_HDCP_STATUS_SUCCESS) { + dev_dbg(dev, "ME cmd 0x%08X failed. status: 0x%X\n", + WIRED_VALIDATE_LOCALITY, + verify_lprime_out.header.status); + return -EIO; + } + + return 0; +} + +/** + * mei_hdcp_get_session_key() - Prepare SKE_Send_Eks. + * @dev: device corresponding to the mei_cl_device + * @data: Intel HW specific hdcp data + * @ske_data: SKE_Send_Eks msg output from ME FW. + * + * Return: 0 on Success, <0 on Failure + */ +static int mei_hdcp_get_session_key(struct device *dev, + struct hdcp_port_data *data, + struct hdcp2_ske_send_eks *ske_data) +{ + struct wired_cmd_get_session_key_in get_skey_in = { { 0 } }; + struct wired_cmd_get_session_key_out get_skey_out = { { 0 } }; + struct mei_cl_device *cldev; + ssize_t byte; + + if (!dev || !data || !ske_data) + return -EINVAL; + + cldev = to_mei_cl_device(dev); + + get_skey_in.header.api_version = HDCP_API_VERSION; + get_skey_in.header.command_id = WIRED_GET_SESSION_KEY; + get_skey_in.header.status = FW_HDCP_STATUS_SUCCESS; + get_skey_in.header.buffer_len = WIRED_CMD_BUF_LEN_GET_SESSION_KEY_IN; + + get_skey_in.port.integrated_port_type = data->port_type; + get_skey_in.port.physical_port = (u8)data->hdcp_ddi; + get_skey_in.port.attached_transcoder = (u8)data->hdcp_transcoder; + + byte = mei_cldev_send(cldev, (u8 *)&get_skey_in, sizeof(get_skey_in)); + if (byte < 0) { + dev_dbg(dev, "mei_cldev_send failed. %zd\n", byte); + return byte; + } + + byte = mei_cldev_recv(cldev, (u8 *)&get_skey_out, sizeof(get_skey_out)); + + if (byte < 0) { + dev_dbg(dev, "mei_cldev_recv failed. %zd\n", byte); + return byte; + } + + if (get_skey_out.header.status != FW_HDCP_STATUS_SUCCESS) { + dev_dbg(dev, "ME cmd 0x%08X failed. status: 0x%X\n", + WIRED_GET_SESSION_KEY, get_skey_out.header.status); + return -EIO; + } + + ske_data->msg_id = HDCP_2_2_SKE_SEND_EKS; + memcpy(ske_data->e_dkey_ks, get_skey_out.e_dkey_ks, + HDCP_2_2_E_DKEY_KS_LEN); + memcpy(ske_data->riv, get_skey_out.r_iv, HDCP_2_2_RIV_LEN); + + return 0; +} + +/** + * mei_hdcp_repeater_check_flow_prepare_ack() - Validate the Downstream topology + * and prepare rep_ack. + * @dev: device corresponding to the mei_cl_device + * @data: Intel HW specific hdcp data + * @rep_topology: Receiver ID List to be validated + * @rep_send_ack : repeater ack from ME FW. + * + * Return: 0 on Success, <0 on Failure + */ +static int +mei_hdcp_repeater_check_flow_prepare_ack(struct device *dev, + struct hdcp_port_data *data, + struct hdcp2_rep_send_receiverid_list + *rep_topology, + struct hdcp2_rep_send_ack + *rep_send_ack) +{ + struct wired_cmd_verify_repeater_in verify_repeater_in = { { 0 } }; + struct wired_cmd_verify_repeater_out verify_repeater_out = { { 0 } }; + struct mei_cl_device *cldev; + ssize_t byte; + + if (!dev || !rep_topology || !rep_send_ack || !data) + return -EINVAL; + + cldev = to_mei_cl_device(dev); + + verify_repeater_in.header.api_version = HDCP_API_VERSION; + verify_repeater_in.header.command_id = WIRED_VERIFY_REPEATER; + verify_repeater_in.header.status = FW_HDCP_STATUS_SUCCESS; + verify_repeater_in.header.buffer_len = + WIRED_CMD_BUF_LEN_VERIFY_REPEATER_IN; + + verify_repeater_in.port.integrated_port_type = data->port_type; + verify_repeater_in.port.physical_port = (u8)data->hdcp_ddi; + verify_repeater_in.port.attached_transcoder = (u8)data->hdcp_transcoder; + + memcpy(verify_repeater_in.rx_info, rep_topology->rx_info, + HDCP_2_2_RXINFO_LEN); + memcpy(verify_repeater_in.seq_num_v, rep_topology->seq_num_v, + HDCP_2_2_SEQ_NUM_LEN); + memcpy(verify_repeater_in.v_prime, rep_topology->v_prime, + HDCP_2_2_V_PRIME_HALF_LEN); + memcpy(verify_repeater_in.receiver_ids, rep_topology->receiver_ids, + HDCP_2_2_RECEIVER_IDS_MAX_LEN); + + byte = mei_cldev_send(cldev, (u8 *)&verify_repeater_in, + sizeof(verify_repeater_in)); + if (byte < 0) { + dev_dbg(dev, "mei_cldev_send failed. %zd\n", byte); + return byte; + } + + byte = mei_cldev_recv(cldev, (u8 *)&verify_repeater_out, + sizeof(verify_repeater_out)); + if (byte < 0) { + dev_dbg(dev, "mei_cldev_recv failed. %zd\n", byte); + return byte; + } + + if (verify_repeater_out.header.status != FW_HDCP_STATUS_SUCCESS) { + dev_dbg(dev, "ME cmd 0x%08X failed. status: 0x%X\n", + WIRED_VERIFY_REPEATER, + verify_repeater_out.header.status); + return -EIO; + } + + memcpy(rep_send_ack->v, verify_repeater_out.v, + HDCP_2_2_V_PRIME_HALF_LEN); + rep_send_ack->msg_id = HDCP_2_2_REP_SEND_ACK; + + return 0; +} + +/** + * mei_hdcp_verify_mprime() - Verify mprime. + * @dev: device corresponding to the mei_cl_device + * @data: Intel HW specific hdcp data + * @stream_ready: RepeaterAuth_Stream_Ready msg for ME FW verification. + * + * Return: 0 on Success, <0 on Failure + */ +static int mei_hdcp_verify_mprime(struct device *dev, + struct hdcp_port_data *data, + struct hdcp2_rep_stream_ready *stream_ready) +{ + struct wired_cmd_repeater_auth_stream_req_in *verify_mprime_in; + struct wired_cmd_repeater_auth_stream_req_out + verify_mprime_out = { { 0 } }; + struct mei_cl_device *cldev; + ssize_t byte; + size_t cmd_size; + + if (!dev || !stream_ready || !data) + return -EINVAL; + + cldev = to_mei_cl_device(dev); + + cmd_size = struct_size(verify_mprime_in, streams, data->k); + if (cmd_size == SIZE_MAX) + return -EINVAL; + + verify_mprime_in = kzalloc(cmd_size, GFP_KERNEL); + if (!verify_mprime_in) + return -ENOMEM; + + verify_mprime_in->header.api_version = HDCP_API_VERSION; + verify_mprime_in->header.command_id = WIRED_REPEATER_AUTH_STREAM_REQ; + verify_mprime_in->header.status = FW_HDCP_STATUS_SUCCESS; + verify_mprime_in->header.buffer_len = cmd_size - sizeof(verify_mprime_in->header); + + verify_mprime_in->port.integrated_port_type = data->port_type; + verify_mprime_in->port.physical_port = (u8)data->hdcp_ddi; + verify_mprime_in->port.attached_transcoder = (u8)data->hdcp_transcoder; + + memcpy(verify_mprime_in->m_prime, stream_ready->m_prime, HDCP_2_2_MPRIME_LEN); + drm_hdcp_cpu_to_be24(verify_mprime_in->seq_num_m, data->seq_num_m); + + memcpy(verify_mprime_in->streams, data->streams, + array_size(data->k, sizeof(*data->streams))); + + verify_mprime_in->k = cpu_to_be16(data->k); + + byte = mei_cldev_send(cldev, (u8 *)verify_mprime_in, cmd_size); + kfree(verify_mprime_in); + if (byte < 0) { + dev_dbg(dev, "mei_cldev_send failed. %zd\n", byte); + return byte; + } + + byte = mei_cldev_recv(cldev, (u8 *)&verify_mprime_out, + sizeof(verify_mprime_out)); + if (byte < 0) { + dev_dbg(dev, "mei_cldev_recv failed. %zd\n", byte); + return byte; + } + + if (verify_mprime_out.header.status != FW_HDCP_STATUS_SUCCESS) { + dev_dbg(dev, "ME cmd 0x%08X failed. status: 0x%X\n", + WIRED_REPEATER_AUTH_STREAM_REQ, + verify_mprime_out.header.status); + return -EIO; + } + + return 0; +} + +/** + * mei_hdcp_enable_authentication() - Mark a port as authenticated + * through ME FW + * @dev: device corresponding to the mei_cl_device + * @data: Intel HW specific hdcp data + * + * Return: 0 on Success, <0 on Failure + */ +static int mei_hdcp_enable_authentication(struct device *dev, + struct hdcp_port_data *data) +{ + struct wired_cmd_enable_auth_in enable_auth_in = { { 0 } }; + struct wired_cmd_enable_auth_out enable_auth_out = { { 0 } }; + struct mei_cl_device *cldev; + ssize_t byte; + + if (!dev || !data) + return -EINVAL; + + cldev = to_mei_cl_device(dev); + + enable_auth_in.header.api_version = HDCP_API_VERSION; + enable_auth_in.header.command_id = WIRED_ENABLE_AUTH; + enable_auth_in.header.status = FW_HDCP_STATUS_SUCCESS; + enable_auth_in.header.buffer_len = WIRED_CMD_BUF_LEN_ENABLE_AUTH_IN; + + enable_auth_in.port.integrated_port_type = data->port_type; + enable_auth_in.port.physical_port = (u8)data->hdcp_ddi; + enable_auth_in.port.attached_transcoder = (u8)data->hdcp_transcoder; + enable_auth_in.stream_type = data->streams[0].stream_type; + + byte = mei_cldev_send(cldev, (u8 *)&enable_auth_in, + sizeof(enable_auth_in)); + if (byte < 0) { + dev_dbg(dev, "mei_cldev_send failed. %zd\n", byte); + return byte; + } + + byte = mei_cldev_recv(cldev, (u8 *)&enable_auth_out, + sizeof(enable_auth_out)); + if (byte < 0) { + dev_dbg(dev, "mei_cldev_recv failed. %zd\n", byte); + return byte; + } + + if (enable_auth_out.header.status != FW_HDCP_STATUS_SUCCESS) { + dev_dbg(dev, "ME cmd 0x%08X failed. status: 0x%X\n", + WIRED_ENABLE_AUTH, enable_auth_out.header.status); + return -EIO; + } + + return 0; +} + +/** + * mei_hdcp_close_session() - Close the Wired HDCP Tx session of ME FW per port. + * This also disables the authenticated state of the port. + * @dev: device corresponding to the mei_cl_device + * @data: Intel HW specific hdcp data + * + * Return: 0 on Success, <0 on Failure + */ +static int +mei_hdcp_close_session(struct device *dev, struct hdcp_port_data *data) +{ + struct wired_cmd_close_session_in session_close_in = { { 0 } }; + struct wired_cmd_close_session_out session_close_out = { { 0 } }; + struct mei_cl_device *cldev; + ssize_t byte; + + if (!dev || !data) + return -EINVAL; + + cldev = to_mei_cl_device(dev); + + session_close_in.header.api_version = HDCP_API_VERSION; + session_close_in.header.command_id = WIRED_CLOSE_SESSION; + session_close_in.header.status = FW_HDCP_STATUS_SUCCESS; + session_close_in.header.buffer_len = + WIRED_CMD_BUF_LEN_CLOSE_SESSION_IN; + + session_close_in.port.integrated_port_type = data->port_type; + session_close_in.port.physical_port = (u8)data->hdcp_ddi; + session_close_in.port.attached_transcoder = (u8)data->hdcp_transcoder; + + byte = mei_cldev_send(cldev, (u8 *)&session_close_in, + sizeof(session_close_in)); + if (byte < 0) { + dev_dbg(dev, "mei_cldev_send failed. %zd\n", byte); + return byte; + } + + byte = mei_cldev_recv(cldev, (u8 *)&session_close_out, + sizeof(session_close_out)); + if (byte < 0) { + dev_dbg(dev, "mei_cldev_recv failed. %zd\n", byte); + return byte; + } + + if (session_close_out.header.status != FW_HDCP_STATUS_SUCCESS) { + dev_dbg(dev, "Session Close Failed. status: 0x%X\n", + session_close_out.header.status); + return -EIO; + } + + return 0; +} + +static const struct i915_hdcp_ops mei_hdcp_ops = { + .owner = THIS_MODULE, + .initiate_hdcp2_session = mei_hdcp_initiate_session, + .verify_receiver_cert_prepare_km = + mei_hdcp_verify_receiver_cert_prepare_km, + .verify_hprime = mei_hdcp_verify_hprime, + .store_pairing_info = mei_hdcp_store_pairing_info, + .initiate_locality_check = mei_hdcp_initiate_locality_check, + .verify_lprime = mei_hdcp_verify_lprime, + .get_session_key = mei_hdcp_get_session_key, + .repeater_check_flow_prepare_ack = + mei_hdcp_repeater_check_flow_prepare_ack, + .verify_mprime = mei_hdcp_verify_mprime, + .enable_hdcp_authentication = mei_hdcp_enable_authentication, + .close_hdcp_session = mei_hdcp_close_session, +}; + +static int mei_component_master_bind(struct device *dev) +{ + struct mei_cl_device *cldev = to_mei_cl_device(dev); + struct i915_hdcp_arbiter *comp_arbiter = mei_cldev_get_drvdata(cldev); + int ret; + + dev_dbg(dev, "%s\n", __func__); + comp_arbiter->ops = &mei_hdcp_ops; + comp_arbiter->hdcp_dev = dev; + ret = component_bind_all(dev, comp_arbiter); + if (ret < 0) + return ret; + + return 0; +} + +static void mei_component_master_unbind(struct device *dev) +{ + struct mei_cl_device *cldev = to_mei_cl_device(dev); + struct i915_hdcp_arbiter *comp_arbiter = mei_cldev_get_drvdata(cldev); + + dev_dbg(dev, "%s\n", __func__); + component_unbind_all(dev, comp_arbiter); +} + +static const struct component_master_ops mei_component_master_ops = { + .bind = mei_component_master_bind, + .unbind = mei_component_master_unbind, +}; + +/** + * mei_hdcp_component_match - compare function for matching mei hdcp. + * + * The function checks if the driver is i915, the subcomponent is HDCP + * and the grand parent of hdcp and the parent of i915 are the same + * PCH device. + * + * @dev: master device + * @subcomponent: subcomponent to match (I915_COMPONENT_HDCP) + * @data: compare data (mei hdcp device) + * + * Return: + * * 1 - if components match + * * 0 - otherwise + */ +static int mei_hdcp_component_match(struct device *dev, int subcomponent, + void *data) +{ + struct device *base = data; + + if (!dev->driver || strcmp(dev->driver->name, "i915") || + subcomponent != I915_COMPONENT_HDCP) + return 0; + + base = base->parent; + if (!base) + return 0; + + base = base->parent; + dev = dev->parent; + + return (base && dev && dev == base); +} + +static int mei_hdcp_probe(struct mei_cl_device *cldev, + const struct mei_cl_device_id *id) +{ + struct i915_hdcp_arbiter *comp_arbiter; + struct component_match *master_match; + int ret; + + ret = mei_cldev_enable(cldev); + if (ret < 0) { + dev_err(&cldev->dev, "mei_cldev_enable Failed. %d\n", ret); + goto enable_err_exit; + } + + comp_arbiter = kzalloc(sizeof(*comp_arbiter), GFP_KERNEL); + if (!comp_arbiter) { + ret = -ENOMEM; + goto err_exit; + } + + master_match = NULL; + component_match_add_typed(&cldev->dev, &master_match, + mei_hdcp_component_match, &cldev->dev); + if (IS_ERR_OR_NULL(master_match)) { + ret = -ENOMEM; + goto err_exit; + } + + mei_cldev_set_drvdata(cldev, comp_arbiter); + ret = component_master_add_with_match(&cldev->dev, + &mei_component_master_ops, + master_match); + if (ret < 0) { + dev_err(&cldev->dev, "Master comp add failed %d\n", ret); + goto err_exit; + } + + return 0; + +err_exit: + mei_cldev_set_drvdata(cldev, NULL); + kfree(comp_arbiter); + mei_cldev_disable(cldev); +enable_err_exit: + return ret; +} + +static void mei_hdcp_remove(struct mei_cl_device *cldev) +{ + struct i915_hdcp_arbiter *comp_arbiter = mei_cldev_get_drvdata(cldev); + int ret; + + component_master_del(&cldev->dev, &mei_component_master_ops); + kfree(comp_arbiter); + mei_cldev_set_drvdata(cldev, NULL); + + ret = mei_cldev_disable(cldev); + if (ret) + dev_warn(&cldev->dev, "mei_cldev_disable() failed\n"); +} + +#define MEI_UUID_HDCP UUID_LE(0xB638AB7E, 0x94E2, 0x4EA2, 0xA5, \ + 0x52, 0xD1, 0xC5, 0x4B, 0x62, 0x7F, 0x04) + +static const struct mei_cl_device_id mei_hdcp_tbl[] = { + { .uuid = MEI_UUID_HDCP, .version = MEI_CL_VERSION_ANY }, + { } +}; +MODULE_DEVICE_TABLE(mei, mei_hdcp_tbl); + +static struct mei_cl_driver mei_hdcp_driver = { + .id_table = mei_hdcp_tbl, + .name = KBUILD_MODNAME, + .probe = mei_hdcp_probe, + .remove = mei_hdcp_remove, +}; + +module_mei_cl_driver(mei_hdcp_driver); + +MODULE_AUTHOR("Intel Corporation"); +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("MEI HDCP"); diff --git a/drivers/misc/mei/hdcp/mei_hdcp.h b/drivers/misc/mei/hdcp/mei_hdcp.h new file mode 100644 index 0000000000..0683d83ec1 --- /dev/null +++ b/drivers/misc/mei/hdcp/mei_hdcp.h @@ -0,0 +1,14 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright © 2019 Intel Corporation + * + * Authors: + * Ramalingam C <ramalingam.c@intel.com> + */ + +#ifndef __MEI_HDCP_H__ +#define __MEI_HDCP_H__ + +#include <drm/display/drm_hdcp.h> + +#endif /* __MEI_HDCP_H__ */ diff --git a/drivers/misc/mei/hw-me-regs.h b/drivers/misc/mei/hw-me-regs.h new file mode 100644 index 0000000000..bdc65d50b9 --- /dev/null +++ b/drivers/misc/mei/hw-me-regs.h @@ -0,0 +1,214 @@ +/* SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause */ +/* + * Copyright (c) 2003-2022, Intel Corporation. All rights reserved. + * Intel Management Engine Interface (Intel MEI) Linux driver + */ +#ifndef _MEI_HW_MEI_REGS_H_ +#define _MEI_HW_MEI_REGS_H_ + +/* + * MEI device IDs + */ +#define MEI_DEV_ID_82946GZ 0x2974 /* 82946GZ/GL */ +#define MEI_DEV_ID_82G35 0x2984 /* 82G35 Express */ +#define MEI_DEV_ID_82Q965 0x2994 /* 82Q963/Q965 */ +#define MEI_DEV_ID_82G965 0x29A4 /* 82P965/G965 */ + +#define MEI_DEV_ID_82GM965 0x2A04 /* Mobile PM965/GM965 */ +#define MEI_DEV_ID_82GME965 0x2A14 /* Mobile GME965/GLE960 */ + +#define MEI_DEV_ID_ICH9_82Q35 0x29B4 /* 82Q35 Express */ +#define MEI_DEV_ID_ICH9_82G33 0x29C4 /* 82G33/G31/P35/P31 Express */ +#define MEI_DEV_ID_ICH9_82Q33 0x29D4 /* 82Q33 Express */ +#define MEI_DEV_ID_ICH9_82X38 0x29E4 /* 82X38/X48 Express */ +#define MEI_DEV_ID_ICH9_3200 0x29F4 /* 3200/3210 Server */ + +#define MEI_DEV_ID_ICH9_6 0x28B4 /* Bearlake */ +#define MEI_DEV_ID_ICH9_7 0x28C4 /* Bearlake */ +#define MEI_DEV_ID_ICH9_8 0x28D4 /* Bearlake */ +#define MEI_DEV_ID_ICH9_9 0x28E4 /* Bearlake */ +#define MEI_DEV_ID_ICH9_10 0x28F4 /* Bearlake */ + +#define MEI_DEV_ID_ICH9M_1 0x2A44 /* Cantiga */ +#define MEI_DEV_ID_ICH9M_2 0x2A54 /* Cantiga */ +#define MEI_DEV_ID_ICH9M_3 0x2A64 /* Cantiga */ +#define MEI_DEV_ID_ICH9M_4 0x2A74 /* Cantiga */ + +#define MEI_DEV_ID_ICH10_1 0x2E04 /* Eaglelake */ +#define MEI_DEV_ID_ICH10_2 0x2E14 /* Eaglelake */ +#define MEI_DEV_ID_ICH10_3 0x2E24 /* Eaglelake */ +#define MEI_DEV_ID_ICH10_4 0x2E34 /* Eaglelake */ + +#define MEI_DEV_ID_IBXPK_1 0x3B64 /* Calpella */ +#define MEI_DEV_ID_IBXPK_2 0x3B65 /* Calpella */ + +#define MEI_DEV_ID_CPT_1 0x1C3A /* Couger Point */ +#define MEI_DEV_ID_PBG_1 0x1D3A /* C600/X79 Patsburg */ + +#define MEI_DEV_ID_PPT_1 0x1E3A /* Panther Point */ +#define MEI_DEV_ID_PPT_2 0x1CBA /* Panther Point */ +#define MEI_DEV_ID_PPT_3 0x1DBA /* Panther Point */ + +#define MEI_DEV_ID_LPT_H 0x8C3A /* Lynx Point H */ +#define MEI_DEV_ID_LPT_W 0x8D3A /* Lynx Point - Wellsburg */ +#define MEI_DEV_ID_LPT_LP 0x9C3A /* Lynx Point LP */ +#define MEI_DEV_ID_LPT_HR 0x8CBA /* Lynx Point H Refresh */ + +#define MEI_DEV_ID_WPT_LP 0x9CBA /* Wildcat Point LP */ +#define MEI_DEV_ID_WPT_LP_2 0x9CBB /* Wildcat Point LP 2 */ + +#define MEI_DEV_ID_SPT 0x9D3A /* Sunrise Point */ +#define MEI_DEV_ID_SPT_2 0x9D3B /* Sunrise Point 2 */ +#define MEI_DEV_ID_SPT_3 0x9D3E /* Sunrise Point 3 (iToutch) */ +#define MEI_DEV_ID_SPT_H 0xA13A /* Sunrise Point H */ +#define MEI_DEV_ID_SPT_H_2 0xA13B /* Sunrise Point H 2 */ + +#define MEI_DEV_ID_LBG 0xA1BA /* Lewisburg (SPT) */ + +#define MEI_DEV_ID_BXT_M 0x1A9A /* Broxton M */ +#define MEI_DEV_ID_APL_I 0x5A9A /* Apollo Lake I */ + +#define MEI_DEV_ID_DNV_IE 0x19E5 /* Denverton IE */ + +#define MEI_DEV_ID_GLK 0x319A /* Gemini Lake */ + +#define MEI_DEV_ID_KBP 0xA2BA /* Kaby Point */ +#define MEI_DEV_ID_KBP_2 0xA2BB /* Kaby Point 2 */ +#define MEI_DEV_ID_KBP_3 0xA2BE /* Kaby Point 3 (iTouch) */ + +#define MEI_DEV_ID_CNP_LP 0x9DE0 /* Cannon Point LP */ +#define MEI_DEV_ID_CNP_LP_3 0x9DE4 /* Cannon Point LP 3 (iTouch) */ +#define MEI_DEV_ID_CNP_H 0xA360 /* Cannon Point H */ +#define MEI_DEV_ID_CNP_H_3 0xA364 /* Cannon Point H 3 (iTouch) */ + +#define MEI_DEV_ID_CMP_LP 0x02e0 /* Comet Point LP */ +#define MEI_DEV_ID_CMP_LP_3 0x02e4 /* Comet Point LP 3 (iTouch) */ + +#define MEI_DEV_ID_CMP_V 0xA3BA /* Comet Point Lake V */ + +#define MEI_DEV_ID_CMP_H 0x06e0 /* Comet Lake H */ +#define MEI_DEV_ID_CMP_H_3 0x06e4 /* Comet Lake H 3 (iTouch) */ + +#define MEI_DEV_ID_CDF 0x18D3 /* Cedar Fork */ + +#define MEI_DEV_ID_ICP_LP 0x34E0 /* Ice Lake Point LP */ +#define MEI_DEV_ID_ICP_N 0x38E0 /* Ice Lake Point N */ + +#define MEI_DEV_ID_JSP_N 0x4DE0 /* Jasper Lake Point N */ + +#define MEI_DEV_ID_TGP_LP 0xA0E0 /* Tiger Lake Point LP */ +#define MEI_DEV_ID_TGP_H 0x43E0 /* Tiger Lake Point H */ + +#define MEI_DEV_ID_MCC 0x4B70 /* Mule Creek Canyon (EHL) */ +#define MEI_DEV_ID_MCC_4 0x4B75 /* Mule Creek Canyon 4 (EHL) */ + +#define MEI_DEV_ID_EBG 0x1BE0 /* Emmitsburg WS */ + +#define MEI_DEV_ID_ADP_S 0x7AE8 /* Alder Lake Point S */ +#define MEI_DEV_ID_ADP_LP 0x7A60 /* Alder Lake Point LP */ +#define MEI_DEV_ID_ADP_P 0x51E0 /* Alder Lake Point P */ +#define MEI_DEV_ID_ADP_N 0x54E0 /* Alder Lake Point N */ + +#define MEI_DEV_ID_RPL_S 0x7A68 /* Raptor Lake Point S */ + +#define MEI_DEV_ID_MTL_M 0x7E70 /* Meteor Lake Point M */ + +/* + * MEI HW Section + */ + +/* Host Firmware Status Registers in PCI Config Space */ +#define PCI_CFG_HFS_1 0x40 +# define PCI_CFG_HFS_1_D0I3_MSK 0x80000000 +# define PCI_CFG_HFS_1_OPMODE_MSK 0xf0000 /* OP MODE Mask: SPS <= 4.0 */ +# define PCI_CFG_HFS_1_OPMODE_SPS 0xf0000 /* SPS SKU : SPS <= 4.0 */ +#define PCI_CFG_HFS_2 0x48 +#define PCI_CFG_HFS_3 0x60 +# define PCI_CFG_HFS_3_FW_SKU_MSK 0x00000070 +# define PCI_CFG_HFS_3_FW_SKU_IGN 0x00000000 +# define PCI_CFG_HFS_3_FW_SKU_SPS 0x00000060 +#define PCI_CFG_HFS_4 0x64 +#define PCI_CFG_HFS_5 0x68 +# define GSC_CFG_HFS_5_BOOT_TYPE_MSK 0x00000003 +# define GSC_CFG_HFS_5_BOOT_TYPE_PXP 3 +#define PCI_CFG_HFS_6 0x6C + +/* MEI registers */ +/* H_CB_WW - Host Circular Buffer (CB) Write Window register */ +#define H_CB_WW 0 +/* H_CSR - Host Control Status register */ +#define H_CSR 4 +/* ME_CB_RW - ME Circular Buffer Read Window register (read only) */ +#define ME_CB_RW 8 +/* ME_CSR_HA - ME Control Status Host Access register (read only) */ +#define ME_CSR_HA 0xC +/* H_HGC_CSR - PGI register */ +#define H_HPG_CSR 0x10 +/* H_D0I3C - D0I3 Control */ +#define H_D0I3C 0x800 + +#define H_GSC_EXT_OP_MEM_BASE_ADDR_LO_REG 0x100 +#define H_GSC_EXT_OP_MEM_BASE_ADDR_HI_REG 0x104 +#define H_GSC_EXT_OP_MEM_LIMIT_REG 0x108 +#define GSC_EXT_OP_MEM_VALID BIT(31) + +/* register bits of H_CSR (Host Control Status register) */ +/* Host Circular Buffer Depth - maximum number of 32-bit entries in CB */ +#define H_CBD 0xFF000000 +/* Host Circular Buffer Write Pointer */ +#define H_CBWP 0x00FF0000 +/* Host Circular Buffer Read Pointer */ +#define H_CBRP 0x0000FF00 +/* Host Reset */ +#define H_RST 0x00000010 +/* Host Ready */ +#define H_RDY 0x00000008 +/* Host Interrupt Generate */ +#define H_IG 0x00000004 +/* Host Interrupt Status */ +#define H_IS 0x00000002 +/* Host Interrupt Enable */ +#define H_IE 0x00000001 +/* Host D0I3 Interrupt Enable */ +#define H_D0I3C_IE 0x00000020 +/* Host D0I3 Interrupt Status */ +#define H_D0I3C_IS 0x00000040 + +/* H_CSR masks */ +#define H_CSR_IE_MASK (H_IE | H_D0I3C_IE) +#define H_CSR_IS_MASK (H_IS | H_D0I3C_IS) + +/* register bits of ME_CSR_HA (ME Control Status Host Access register) */ +/* ME CB (Circular Buffer) Depth HRA (Host Read Access) - host read only +access to ME_CBD */ +#define ME_CBD_HRA 0xFF000000 +/* ME CB Write Pointer HRA - host read only access to ME_CBWP */ +#define ME_CBWP_HRA 0x00FF0000 +/* ME CB Read Pointer HRA - host read only access to ME_CBRP */ +#define ME_CBRP_HRA 0x0000FF00 +/* ME Power Gate Isolation Capability HRA - host ready only access */ +#define ME_PGIC_HRA 0x00000040 +/* ME Reset HRA - host read only access to ME_RST */ +#define ME_RST_HRA 0x00000010 +/* ME Ready HRA - host read only access to ME_RDY */ +#define ME_RDY_HRA 0x00000008 +/* ME Interrupt Generate HRA - host read only access to ME_IG */ +#define ME_IG_HRA 0x00000004 +/* ME Interrupt Status HRA - host read only access to ME_IS */ +#define ME_IS_HRA 0x00000002 +/* ME Interrupt Enable HRA - host read only access to ME_IE */ +#define ME_IE_HRA 0x00000001 +/* TRC control shadow register */ +#define ME_TRC 0x00000030 + +/* H_HPG_CSR register bits */ +#define H_HPG_CSR_PGIHEXR 0x00000001 +#define H_HPG_CSR_PGI 0x00000002 + +/* H_D0I3C register bits */ +#define H_D0I3C_CIP 0x00000001 +#define H_D0I3C_IR 0x00000002 +#define H_D0I3C_I3 0x00000004 +#define H_D0I3C_RR 0x00000008 + +#endif /* _MEI_HW_MEI_REGS_H_ */ diff --git a/drivers/misc/mei/hw-me.c b/drivers/misc/mei/hw-me.c new file mode 100644 index 0000000000..da4ef0b519 --- /dev/null +++ b/drivers/misc/mei/hw-me.c @@ -0,0 +1,1770 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2003-2022, Intel Corporation. All rights reserved. + * Intel Management Engine Interface (Intel MEI) Linux driver + */ + +#include <linux/pci.h> + +#include <linux/kthread.h> +#include <linux/interrupt.h> +#include <linux/pm_runtime.h> +#include <linux/sizes.h> +#include <linux/delay.h> + +#include "mei_dev.h" +#include "hbm.h" + +#include "hw-me.h" +#include "hw-me-regs.h" + +#include "mei-trace.h" + +/** + * mei_me_reg_read - Reads 32bit data from the mei device + * + * @hw: the me hardware structure + * @offset: offset from which to read the data + * + * Return: register value (u32) + */ +static inline u32 mei_me_reg_read(const struct mei_me_hw *hw, + unsigned long offset) +{ + return ioread32(hw->mem_addr + offset); +} + + +/** + * mei_me_reg_write - Writes 32bit data to the mei device + * + * @hw: the me hardware structure + * @offset: offset from which to write the data + * @value: register value to write (u32) + */ +static inline void mei_me_reg_write(const struct mei_me_hw *hw, + unsigned long offset, u32 value) +{ + iowrite32(value, hw->mem_addr + offset); +} + +/** + * mei_me_mecbrw_read - Reads 32bit data from ME circular buffer + * read window register + * + * @dev: the device structure + * + * Return: ME_CB_RW register value (u32) + */ +static inline u32 mei_me_mecbrw_read(const struct mei_device *dev) +{ + return mei_me_reg_read(to_me_hw(dev), ME_CB_RW); +} + +/** + * mei_me_hcbww_write - write 32bit data to the host circular buffer + * + * @dev: the device structure + * @data: 32bit data to be written to the host circular buffer + */ +static inline void mei_me_hcbww_write(struct mei_device *dev, u32 data) +{ + mei_me_reg_write(to_me_hw(dev), H_CB_WW, data); +} + +/** + * mei_me_mecsr_read - Reads 32bit data from the ME CSR + * + * @dev: the device structure + * + * Return: ME_CSR_HA register value (u32) + */ +static inline u32 mei_me_mecsr_read(const struct mei_device *dev) +{ + u32 reg; + + reg = mei_me_reg_read(to_me_hw(dev), ME_CSR_HA); + trace_mei_reg_read(dev->dev, "ME_CSR_HA", ME_CSR_HA, reg); + + return reg; +} + +/** + * mei_hcsr_read - Reads 32bit data from the host CSR + * + * @dev: the device structure + * + * Return: H_CSR register value (u32) + */ +static inline u32 mei_hcsr_read(const struct mei_device *dev) +{ + u32 reg; + + reg = mei_me_reg_read(to_me_hw(dev), H_CSR); + trace_mei_reg_read(dev->dev, "H_CSR", H_CSR, reg); + + return reg; +} + +/** + * mei_hcsr_write - writes H_CSR register to the mei device + * + * @dev: the device structure + * @reg: new register value + */ +static inline void mei_hcsr_write(struct mei_device *dev, u32 reg) +{ + trace_mei_reg_write(dev->dev, "H_CSR", H_CSR, reg); + mei_me_reg_write(to_me_hw(dev), H_CSR, reg); +} + +/** + * mei_hcsr_set - writes H_CSR register to the mei device, + * and ignores the H_IS bit for it is write-one-to-zero. + * + * @dev: the device structure + * @reg: new register value + */ +static inline void mei_hcsr_set(struct mei_device *dev, u32 reg) +{ + reg &= ~H_CSR_IS_MASK; + mei_hcsr_write(dev, reg); +} + +/** + * mei_hcsr_set_hig - set host interrupt (set H_IG) + * + * @dev: the device structure + */ +static inline void mei_hcsr_set_hig(struct mei_device *dev) +{ + u32 hcsr; + + hcsr = mei_hcsr_read(dev) | H_IG; + mei_hcsr_set(dev, hcsr); +} + +/** + * mei_me_d0i3c_read - Reads 32bit data from the D0I3C register + * + * @dev: the device structure + * + * Return: H_D0I3C register value (u32) + */ +static inline u32 mei_me_d0i3c_read(const struct mei_device *dev) +{ + u32 reg; + + reg = mei_me_reg_read(to_me_hw(dev), H_D0I3C); + trace_mei_reg_read(dev->dev, "H_D0I3C", H_D0I3C, reg); + + return reg; +} + +/** + * mei_me_d0i3c_write - writes H_D0I3C register to device + * + * @dev: the device structure + * @reg: new register value + */ +static inline void mei_me_d0i3c_write(struct mei_device *dev, u32 reg) +{ + trace_mei_reg_write(dev->dev, "H_D0I3C", H_D0I3C, reg); + mei_me_reg_write(to_me_hw(dev), H_D0I3C, reg); +} + +/** + * mei_me_trc_status - read trc status register + * + * @dev: mei device + * @trc: trc status register value + * + * Return: 0 on success, error otherwise + */ +static int mei_me_trc_status(struct mei_device *dev, u32 *trc) +{ + struct mei_me_hw *hw = to_me_hw(dev); + + if (!hw->cfg->hw_trc_supported) + return -EOPNOTSUPP; + + *trc = mei_me_reg_read(hw, ME_TRC); + trace_mei_reg_read(dev->dev, "ME_TRC", ME_TRC, *trc); + + return 0; +} + +/** + * mei_me_fw_status - read fw status register from pci config space + * + * @dev: mei device + * @fw_status: fw status register values + * + * Return: 0 on success, error otherwise + */ +static int mei_me_fw_status(struct mei_device *dev, + struct mei_fw_status *fw_status) +{ + struct mei_me_hw *hw = to_me_hw(dev); + const struct mei_fw_status *fw_src = &hw->cfg->fw_status; + int ret; + int i; + + if (!fw_status || !hw->read_fws) + return -EINVAL; + + fw_status->count = fw_src->count; + for (i = 0; i < fw_src->count && i < MEI_FW_STATUS_MAX; i++) { + ret = hw->read_fws(dev, fw_src->status[i], + &fw_status->status[i]); + trace_mei_pci_cfg_read(dev->dev, "PCI_CFG_HFS_X", + fw_src->status[i], + fw_status->status[i]); + if (ret) + return ret; + } + + return 0; +} + +/** + * mei_me_hw_config - configure hw dependent settings + * + * @dev: mei device + * + * Return: + * * -EINVAL when read_fws is not set + * * 0 on success + * + */ +static int mei_me_hw_config(struct mei_device *dev) +{ + struct mei_me_hw *hw = to_me_hw(dev); + u32 hcsr, reg; + + if (WARN_ON(!hw->read_fws)) + return -EINVAL; + + /* Doesn't change in runtime */ + hcsr = mei_hcsr_read(dev); + hw->hbuf_depth = (hcsr & H_CBD) >> 24; + + reg = 0; + hw->read_fws(dev, PCI_CFG_HFS_1, ®); + trace_mei_pci_cfg_read(dev->dev, "PCI_CFG_HFS_1", PCI_CFG_HFS_1, reg); + hw->d0i3_supported = + ((reg & PCI_CFG_HFS_1_D0I3_MSK) == PCI_CFG_HFS_1_D0I3_MSK); + + hw->pg_state = MEI_PG_OFF; + if (hw->d0i3_supported) { + reg = mei_me_d0i3c_read(dev); + if (reg & H_D0I3C_I3) + hw->pg_state = MEI_PG_ON; + } + + return 0; +} + +/** + * mei_me_pg_state - translate internal pg state + * to the mei power gating state + * + * @dev: mei device + * + * Return: MEI_PG_OFF if aliveness is on and MEI_PG_ON otherwise + */ +static inline enum mei_pg_state mei_me_pg_state(struct mei_device *dev) +{ + struct mei_me_hw *hw = to_me_hw(dev); + + return hw->pg_state; +} + +static inline u32 me_intr_src(u32 hcsr) +{ + return hcsr & H_CSR_IS_MASK; +} + +/** + * me_intr_disable - disables mei device interrupts + * using supplied hcsr register value. + * + * @dev: the device structure + * @hcsr: supplied hcsr register value + */ +static inline void me_intr_disable(struct mei_device *dev, u32 hcsr) +{ + hcsr &= ~H_CSR_IE_MASK; + mei_hcsr_set(dev, hcsr); +} + +/** + * me_intr_clear - clear and stop interrupts + * + * @dev: the device structure + * @hcsr: supplied hcsr register value + */ +static inline void me_intr_clear(struct mei_device *dev, u32 hcsr) +{ + if (me_intr_src(hcsr)) + mei_hcsr_write(dev, hcsr); +} + +/** + * mei_me_intr_clear - clear and stop interrupts + * + * @dev: the device structure + */ +static void mei_me_intr_clear(struct mei_device *dev) +{ + u32 hcsr = mei_hcsr_read(dev); + + me_intr_clear(dev, hcsr); +} +/** + * mei_me_intr_enable - enables mei device interrupts + * + * @dev: the device structure + */ +static void mei_me_intr_enable(struct mei_device *dev) +{ + u32 hcsr; + + if (mei_me_hw_use_polling(to_me_hw(dev))) + return; + + hcsr = mei_hcsr_read(dev) | H_CSR_IE_MASK; + mei_hcsr_set(dev, hcsr); +} + +/** + * mei_me_intr_disable - disables mei device interrupts + * + * @dev: the device structure + */ +static void mei_me_intr_disable(struct mei_device *dev) +{ + u32 hcsr = mei_hcsr_read(dev); + + me_intr_disable(dev, hcsr); +} + +/** + * mei_me_synchronize_irq - wait for pending IRQ handlers + * + * @dev: the device structure + */ +static void mei_me_synchronize_irq(struct mei_device *dev) +{ + struct mei_me_hw *hw = to_me_hw(dev); + + if (mei_me_hw_use_polling(hw)) + return; + + synchronize_irq(hw->irq); +} + +/** + * mei_me_hw_reset_release - release device from the reset + * + * @dev: the device structure + */ +static void mei_me_hw_reset_release(struct mei_device *dev) +{ + u32 hcsr = mei_hcsr_read(dev); + + hcsr |= H_IG; + hcsr &= ~H_RST; + mei_hcsr_set(dev, hcsr); +} + +/** + * mei_me_host_set_ready - enable device + * + * @dev: mei device + */ +static void mei_me_host_set_ready(struct mei_device *dev) +{ + u32 hcsr = mei_hcsr_read(dev); + + if (!mei_me_hw_use_polling(to_me_hw(dev))) + hcsr |= H_CSR_IE_MASK; + + hcsr |= H_IG | H_RDY; + mei_hcsr_set(dev, hcsr); +} + +/** + * mei_me_host_is_ready - check whether the host has turned ready + * + * @dev: mei device + * Return: bool + */ +static bool mei_me_host_is_ready(struct mei_device *dev) +{ + u32 hcsr = mei_hcsr_read(dev); + + return (hcsr & H_RDY) == H_RDY; +} + +/** + * mei_me_hw_is_ready - check whether the me(hw) has turned ready + * + * @dev: mei device + * Return: bool + */ +static bool mei_me_hw_is_ready(struct mei_device *dev) +{ + u32 mecsr = mei_me_mecsr_read(dev); + + return (mecsr & ME_RDY_HRA) == ME_RDY_HRA; +} + +/** + * mei_me_hw_is_resetting - check whether the me(hw) is in reset + * + * @dev: mei device + * Return: bool + */ +static bool mei_me_hw_is_resetting(struct mei_device *dev) +{ + u32 mecsr = mei_me_mecsr_read(dev); + + return (mecsr & ME_RST_HRA) == ME_RST_HRA; +} + +/** + * mei_gsc_pxp_check - check for gsc firmware entering pxp mode + * + * @dev: the device structure + */ +static void mei_gsc_pxp_check(struct mei_device *dev) +{ + struct mei_me_hw *hw = to_me_hw(dev); + u32 fwsts5 = 0; + + if (dev->pxp_mode == MEI_DEV_PXP_DEFAULT) + return; + + hw->read_fws(dev, PCI_CFG_HFS_5, &fwsts5); + trace_mei_pci_cfg_read(dev->dev, "PCI_CFG_HFS_5", PCI_CFG_HFS_5, fwsts5); + if ((fwsts5 & GSC_CFG_HFS_5_BOOT_TYPE_MSK) == GSC_CFG_HFS_5_BOOT_TYPE_PXP) { + dev_dbg(dev->dev, "pxp mode is ready 0x%08x\n", fwsts5); + dev->pxp_mode = MEI_DEV_PXP_READY; + } else { + dev_dbg(dev->dev, "pxp mode is not ready 0x%08x\n", fwsts5); + } +} + +/** + * mei_me_hw_ready_wait - wait until the me(hw) has turned ready + * or timeout is reached + * + * @dev: mei device + * Return: 0 on success, error otherwise + */ +static int mei_me_hw_ready_wait(struct mei_device *dev) +{ + mutex_unlock(&dev->device_lock); + wait_event_timeout(dev->wait_hw_ready, + dev->recvd_hw_ready, + dev->timeouts.hw_ready); + mutex_lock(&dev->device_lock); + if (!dev->recvd_hw_ready) { + dev_err(dev->dev, "wait hw ready failed\n"); + return -ETIME; + } + + mei_gsc_pxp_check(dev); + + mei_me_hw_reset_release(dev); + dev->recvd_hw_ready = false; + return 0; +} + +/** + * mei_me_hw_start - hw start routine + * + * @dev: mei device + * Return: 0 on success, error otherwise + */ +static int mei_me_hw_start(struct mei_device *dev) +{ + int ret = mei_me_hw_ready_wait(dev); + + if (ret) + return ret; + dev_dbg(dev->dev, "hw is ready\n"); + + mei_me_host_set_ready(dev); + return ret; +} + + +/** + * mei_hbuf_filled_slots - gets number of device filled buffer slots + * + * @dev: the device structure + * + * Return: number of filled slots + */ +static unsigned char mei_hbuf_filled_slots(struct mei_device *dev) +{ + u32 hcsr; + char read_ptr, write_ptr; + + hcsr = mei_hcsr_read(dev); + + read_ptr = (char) ((hcsr & H_CBRP) >> 8); + write_ptr = (char) ((hcsr & H_CBWP) >> 16); + + return (unsigned char) (write_ptr - read_ptr); +} + +/** + * mei_me_hbuf_is_empty - checks if host buffer is empty. + * + * @dev: the device structure + * + * Return: true if empty, false - otherwise. + */ +static bool mei_me_hbuf_is_empty(struct mei_device *dev) +{ + return mei_hbuf_filled_slots(dev) == 0; +} + +/** + * mei_me_hbuf_empty_slots - counts write empty slots. + * + * @dev: the device structure + * + * Return: -EOVERFLOW if overflow, otherwise empty slots count + */ +static int mei_me_hbuf_empty_slots(struct mei_device *dev) +{ + struct mei_me_hw *hw = to_me_hw(dev); + unsigned char filled_slots, empty_slots; + + filled_slots = mei_hbuf_filled_slots(dev); + empty_slots = hw->hbuf_depth - filled_slots; + + /* check for overflow */ + if (filled_slots > hw->hbuf_depth) + return -EOVERFLOW; + + return empty_slots; +} + +/** + * mei_me_hbuf_depth - returns depth of the hw buffer. + * + * @dev: the device structure + * + * Return: size of hw buffer in slots + */ +static u32 mei_me_hbuf_depth(const struct mei_device *dev) +{ + struct mei_me_hw *hw = to_me_hw(dev); + + return hw->hbuf_depth; +} + +/** + * mei_me_hbuf_write - writes a message to host hw buffer. + * + * @dev: the device structure + * @hdr: header of message + * @hdr_len: header length in bytes: must be multiplication of a slot (4bytes) + * @data: payload + * @data_len: payload length in bytes + * + * Return: 0 if success, < 0 - otherwise. + */ +static int mei_me_hbuf_write(struct mei_device *dev, + const void *hdr, size_t hdr_len, + const void *data, size_t data_len) +{ + unsigned long rem; + unsigned long i; + const u32 *reg_buf; + u32 dw_cnt; + int empty_slots; + + if (WARN_ON(!hdr || hdr_len & 0x3)) + return -EINVAL; + + if (!data && data_len) { + dev_err(dev->dev, "wrong parameters null data with data_len = %zu\n", data_len); + return -EINVAL; + } + + dev_dbg(dev->dev, MEI_HDR_FMT, MEI_HDR_PRM((struct mei_msg_hdr *)hdr)); + + empty_slots = mei_hbuf_empty_slots(dev); + dev_dbg(dev->dev, "empty slots = %d.\n", empty_slots); + + if (empty_slots < 0) + return -EOVERFLOW; + + dw_cnt = mei_data2slots(hdr_len + data_len); + if (dw_cnt > (u32)empty_slots) + return -EMSGSIZE; + + reg_buf = hdr; + for (i = 0; i < hdr_len / MEI_SLOT_SIZE; i++) + mei_me_hcbww_write(dev, reg_buf[i]); + + reg_buf = data; + for (i = 0; i < data_len / MEI_SLOT_SIZE; i++) + mei_me_hcbww_write(dev, reg_buf[i]); + + rem = data_len & 0x3; + if (rem > 0) { + u32 reg = 0; + + memcpy(®, (const u8 *)data + data_len - rem, rem); + mei_me_hcbww_write(dev, reg); + } + + mei_hcsr_set_hig(dev); + if (!mei_me_hw_is_ready(dev)) + return -EIO; + + return 0; +} + +/** + * mei_me_count_full_read_slots - counts read full slots. + * + * @dev: the device structure + * + * Return: -EOVERFLOW if overflow, otherwise filled slots count + */ +static int mei_me_count_full_read_slots(struct mei_device *dev) +{ + u32 me_csr; + char read_ptr, write_ptr; + unsigned char buffer_depth, filled_slots; + + me_csr = mei_me_mecsr_read(dev); + buffer_depth = (unsigned char)((me_csr & ME_CBD_HRA) >> 24); + read_ptr = (char) ((me_csr & ME_CBRP_HRA) >> 8); + write_ptr = (char) ((me_csr & ME_CBWP_HRA) >> 16); + filled_slots = (unsigned char) (write_ptr - read_ptr); + + /* check for overflow */ + if (filled_slots > buffer_depth) + return -EOVERFLOW; + + dev_dbg(dev->dev, "filled_slots =%08x\n", filled_slots); + return (int)filled_slots; +} + +/** + * mei_me_read_slots - reads a message from mei device. + * + * @dev: the device structure + * @buffer: message buffer will be written + * @buffer_length: message size will be read + * + * Return: always 0 + */ +static int mei_me_read_slots(struct mei_device *dev, unsigned char *buffer, + unsigned long buffer_length) +{ + u32 *reg_buf = (u32 *)buffer; + + for (; buffer_length >= MEI_SLOT_SIZE; buffer_length -= MEI_SLOT_SIZE) + *reg_buf++ = mei_me_mecbrw_read(dev); + + if (buffer_length > 0) { + u32 reg = mei_me_mecbrw_read(dev); + + memcpy(reg_buf, ®, buffer_length); + } + + mei_hcsr_set_hig(dev); + return 0; +} + +/** + * mei_me_pg_set - write pg enter register + * + * @dev: the device structure + */ +static void mei_me_pg_set(struct mei_device *dev) +{ + struct mei_me_hw *hw = to_me_hw(dev); + u32 reg; + + reg = mei_me_reg_read(hw, H_HPG_CSR); + trace_mei_reg_read(dev->dev, "H_HPG_CSR", H_HPG_CSR, reg); + + reg |= H_HPG_CSR_PGI; + + trace_mei_reg_write(dev->dev, "H_HPG_CSR", H_HPG_CSR, reg); + mei_me_reg_write(hw, H_HPG_CSR, reg); +} + +/** + * mei_me_pg_unset - write pg exit register + * + * @dev: the device structure + */ +static void mei_me_pg_unset(struct mei_device *dev) +{ + struct mei_me_hw *hw = to_me_hw(dev); + u32 reg; + + reg = mei_me_reg_read(hw, H_HPG_CSR); + trace_mei_reg_read(dev->dev, "H_HPG_CSR", H_HPG_CSR, reg); + + WARN(!(reg & H_HPG_CSR_PGI), "PGI is not set\n"); + + reg |= H_HPG_CSR_PGIHEXR; + + trace_mei_reg_write(dev->dev, "H_HPG_CSR", H_HPG_CSR, reg); + mei_me_reg_write(hw, H_HPG_CSR, reg); +} + +/** + * mei_me_pg_legacy_enter_sync - perform legacy pg entry procedure + * + * @dev: the device structure + * + * Return: 0 on success an error code otherwise + */ +static int mei_me_pg_legacy_enter_sync(struct mei_device *dev) +{ + struct mei_me_hw *hw = to_me_hw(dev); + int ret; + + dev->pg_event = MEI_PG_EVENT_WAIT; + + ret = mei_hbm_pg(dev, MEI_PG_ISOLATION_ENTRY_REQ_CMD); + if (ret) + return ret; + + mutex_unlock(&dev->device_lock); + wait_event_timeout(dev->wait_pg, + dev->pg_event == MEI_PG_EVENT_RECEIVED, + dev->timeouts.pgi); + mutex_lock(&dev->device_lock); + + if (dev->pg_event == MEI_PG_EVENT_RECEIVED) { + mei_me_pg_set(dev); + ret = 0; + } else { + ret = -ETIME; + } + + dev->pg_event = MEI_PG_EVENT_IDLE; + hw->pg_state = MEI_PG_ON; + + return ret; +} + +/** + * mei_me_pg_legacy_exit_sync - perform legacy pg exit procedure + * + * @dev: the device structure + * + * Return: 0 on success an error code otherwise + */ +static int mei_me_pg_legacy_exit_sync(struct mei_device *dev) +{ + struct mei_me_hw *hw = to_me_hw(dev); + int ret; + + if (dev->pg_event == MEI_PG_EVENT_RECEIVED) + goto reply; + + dev->pg_event = MEI_PG_EVENT_WAIT; + + mei_me_pg_unset(dev); + + mutex_unlock(&dev->device_lock); + wait_event_timeout(dev->wait_pg, + dev->pg_event == MEI_PG_EVENT_RECEIVED, + dev->timeouts.pgi); + mutex_lock(&dev->device_lock); + +reply: + if (dev->pg_event != MEI_PG_EVENT_RECEIVED) { + ret = -ETIME; + goto out; + } + + dev->pg_event = MEI_PG_EVENT_INTR_WAIT; + ret = mei_hbm_pg(dev, MEI_PG_ISOLATION_EXIT_RES_CMD); + if (ret) + return ret; + + mutex_unlock(&dev->device_lock); + wait_event_timeout(dev->wait_pg, + dev->pg_event == MEI_PG_EVENT_INTR_RECEIVED, + dev->timeouts.pgi); + mutex_lock(&dev->device_lock); + + if (dev->pg_event == MEI_PG_EVENT_INTR_RECEIVED) + ret = 0; + else + ret = -ETIME; + +out: + dev->pg_event = MEI_PG_EVENT_IDLE; + hw->pg_state = MEI_PG_OFF; + + return ret; +} + +/** + * mei_me_pg_in_transition - is device now in pg transition + * + * @dev: the device structure + * + * Return: true if in pg transition, false otherwise + */ +static bool mei_me_pg_in_transition(struct mei_device *dev) +{ + return dev->pg_event >= MEI_PG_EVENT_WAIT && + dev->pg_event <= MEI_PG_EVENT_INTR_WAIT; +} + +/** + * mei_me_pg_is_enabled - detect if PG is supported by HW + * + * @dev: the device structure + * + * Return: true is pg supported, false otherwise + */ +static bool mei_me_pg_is_enabled(struct mei_device *dev) +{ + struct mei_me_hw *hw = to_me_hw(dev); + u32 reg = mei_me_mecsr_read(dev); + + if (hw->d0i3_supported) + return true; + + if ((reg & ME_PGIC_HRA) == 0) + goto notsupported; + + if (!dev->hbm_f_pg_supported) + goto notsupported; + + return true; + +notsupported: + dev_dbg(dev->dev, "pg: not supported: d0i3 = %d HGP = %d hbm version %d.%d ?= %d.%d\n", + hw->d0i3_supported, + !!(reg & ME_PGIC_HRA), + dev->version.major_version, + dev->version.minor_version, + HBM_MAJOR_VERSION_PGI, + HBM_MINOR_VERSION_PGI); + + return false; +} + +/** + * mei_me_d0i3_set - write d0i3 register bit on mei device. + * + * @dev: the device structure + * @intr: ask for interrupt + * + * Return: D0I3C register value + */ +static u32 mei_me_d0i3_set(struct mei_device *dev, bool intr) +{ + u32 reg = mei_me_d0i3c_read(dev); + + reg |= H_D0I3C_I3; + if (intr) + reg |= H_D0I3C_IR; + else + reg &= ~H_D0I3C_IR; + mei_me_d0i3c_write(dev, reg); + /* read it to ensure HW consistency */ + reg = mei_me_d0i3c_read(dev); + return reg; +} + +/** + * mei_me_d0i3_unset - clean d0i3 register bit on mei device. + * + * @dev: the device structure + * + * Return: D0I3C register value + */ +static u32 mei_me_d0i3_unset(struct mei_device *dev) +{ + u32 reg = mei_me_d0i3c_read(dev); + + reg &= ~H_D0I3C_I3; + reg |= H_D0I3C_IR; + mei_me_d0i3c_write(dev, reg); + /* read it to ensure HW consistency */ + reg = mei_me_d0i3c_read(dev); + return reg; +} + +/** + * mei_me_d0i3_enter_sync - perform d0i3 entry procedure + * + * @dev: the device structure + * + * Return: 0 on success an error code otherwise + */ +static int mei_me_d0i3_enter_sync(struct mei_device *dev) +{ + struct mei_me_hw *hw = to_me_hw(dev); + int ret; + u32 reg; + + reg = mei_me_d0i3c_read(dev); + if (reg & H_D0I3C_I3) { + /* we are in d0i3, nothing to do */ + dev_dbg(dev->dev, "d0i3 set not needed\n"); + ret = 0; + goto on; + } + + /* PGI entry procedure */ + dev->pg_event = MEI_PG_EVENT_WAIT; + + ret = mei_hbm_pg(dev, MEI_PG_ISOLATION_ENTRY_REQ_CMD); + if (ret) + /* FIXME: should we reset here? */ + goto out; + + mutex_unlock(&dev->device_lock); + wait_event_timeout(dev->wait_pg, + dev->pg_event == MEI_PG_EVENT_RECEIVED, + dev->timeouts.pgi); + mutex_lock(&dev->device_lock); + + if (dev->pg_event != MEI_PG_EVENT_RECEIVED) { + ret = -ETIME; + goto out; + } + /* end PGI entry procedure */ + + dev->pg_event = MEI_PG_EVENT_INTR_WAIT; + + reg = mei_me_d0i3_set(dev, true); + if (!(reg & H_D0I3C_CIP)) { + dev_dbg(dev->dev, "d0i3 enter wait not needed\n"); + ret = 0; + goto on; + } + + mutex_unlock(&dev->device_lock); + wait_event_timeout(dev->wait_pg, + dev->pg_event == MEI_PG_EVENT_INTR_RECEIVED, + dev->timeouts.d0i3); + mutex_lock(&dev->device_lock); + + if (dev->pg_event != MEI_PG_EVENT_INTR_RECEIVED) { + reg = mei_me_d0i3c_read(dev); + if (!(reg & H_D0I3C_I3)) { + ret = -ETIME; + goto out; + } + } + + ret = 0; +on: + hw->pg_state = MEI_PG_ON; +out: + dev->pg_event = MEI_PG_EVENT_IDLE; + dev_dbg(dev->dev, "d0i3 enter ret = %d\n", ret); + return ret; +} + +/** + * mei_me_d0i3_enter - perform d0i3 entry procedure + * no hbm PG handshake + * no waiting for confirmation; runs with interrupts + * disabled + * + * @dev: the device structure + * + * Return: 0 on success an error code otherwise + */ +static int mei_me_d0i3_enter(struct mei_device *dev) +{ + struct mei_me_hw *hw = to_me_hw(dev); + u32 reg; + + reg = mei_me_d0i3c_read(dev); + if (reg & H_D0I3C_I3) { + /* we are in d0i3, nothing to do */ + dev_dbg(dev->dev, "already d0i3 : set not needed\n"); + goto on; + } + + mei_me_d0i3_set(dev, false); +on: + hw->pg_state = MEI_PG_ON; + dev->pg_event = MEI_PG_EVENT_IDLE; + dev_dbg(dev->dev, "d0i3 enter\n"); + return 0; +} + +/** + * mei_me_d0i3_exit_sync - perform d0i3 exit procedure + * + * @dev: the device structure + * + * Return: 0 on success an error code otherwise + */ +static int mei_me_d0i3_exit_sync(struct mei_device *dev) +{ + struct mei_me_hw *hw = to_me_hw(dev); + int ret; + u32 reg; + + dev->pg_event = MEI_PG_EVENT_INTR_WAIT; + + reg = mei_me_d0i3c_read(dev); + if (!(reg & H_D0I3C_I3)) { + /* we are not in d0i3, nothing to do */ + dev_dbg(dev->dev, "d0i3 exit not needed\n"); + ret = 0; + goto off; + } + + reg = mei_me_d0i3_unset(dev); + if (!(reg & H_D0I3C_CIP)) { + dev_dbg(dev->dev, "d0i3 exit wait not needed\n"); + ret = 0; + goto off; + } + + mutex_unlock(&dev->device_lock); + wait_event_timeout(dev->wait_pg, + dev->pg_event == MEI_PG_EVENT_INTR_RECEIVED, + dev->timeouts.d0i3); + mutex_lock(&dev->device_lock); + + if (dev->pg_event != MEI_PG_EVENT_INTR_RECEIVED) { + reg = mei_me_d0i3c_read(dev); + if (reg & H_D0I3C_I3) { + ret = -ETIME; + goto out; + } + } + + ret = 0; +off: + hw->pg_state = MEI_PG_OFF; +out: + dev->pg_event = MEI_PG_EVENT_IDLE; + + dev_dbg(dev->dev, "d0i3 exit ret = %d\n", ret); + return ret; +} + +/** + * mei_me_pg_legacy_intr - perform legacy pg processing + * in interrupt thread handler + * + * @dev: the device structure + */ +static void mei_me_pg_legacy_intr(struct mei_device *dev) +{ + struct mei_me_hw *hw = to_me_hw(dev); + + if (dev->pg_event != MEI_PG_EVENT_INTR_WAIT) + return; + + dev->pg_event = MEI_PG_EVENT_INTR_RECEIVED; + hw->pg_state = MEI_PG_OFF; + if (waitqueue_active(&dev->wait_pg)) + wake_up(&dev->wait_pg); +} + +/** + * mei_me_d0i3_intr - perform d0i3 processing in interrupt thread handler + * + * @dev: the device structure + * @intr_source: interrupt source + */ +static void mei_me_d0i3_intr(struct mei_device *dev, u32 intr_source) +{ + struct mei_me_hw *hw = to_me_hw(dev); + + if (dev->pg_event == MEI_PG_EVENT_INTR_WAIT && + (intr_source & H_D0I3C_IS)) { + dev->pg_event = MEI_PG_EVENT_INTR_RECEIVED; + if (hw->pg_state == MEI_PG_ON) { + hw->pg_state = MEI_PG_OFF; + if (dev->hbm_state != MEI_HBM_IDLE) { + /* + * force H_RDY because it could be + * wiped off during PG + */ + dev_dbg(dev->dev, "d0i3 set host ready\n"); + mei_me_host_set_ready(dev); + } + } else { + hw->pg_state = MEI_PG_ON; + } + + wake_up(&dev->wait_pg); + } + + if (hw->pg_state == MEI_PG_ON && (intr_source & H_IS)) { + /* + * HW sent some data and we are in D0i3, so + * we got here because of HW initiated exit from D0i3. + * Start runtime pm resume sequence to exit low power state. + */ + dev_dbg(dev->dev, "d0i3 want resume\n"); + mei_hbm_pg_resume(dev); + } +} + +/** + * mei_me_pg_intr - perform pg processing in interrupt thread handler + * + * @dev: the device structure + * @intr_source: interrupt source + */ +static void mei_me_pg_intr(struct mei_device *dev, u32 intr_source) +{ + struct mei_me_hw *hw = to_me_hw(dev); + + if (hw->d0i3_supported) + mei_me_d0i3_intr(dev, intr_source); + else + mei_me_pg_legacy_intr(dev); +} + +/** + * mei_me_pg_enter_sync - perform runtime pm entry procedure + * + * @dev: the device structure + * + * Return: 0 on success an error code otherwise + */ +int mei_me_pg_enter_sync(struct mei_device *dev) +{ + struct mei_me_hw *hw = to_me_hw(dev); + + if (hw->d0i3_supported) + return mei_me_d0i3_enter_sync(dev); + else + return mei_me_pg_legacy_enter_sync(dev); +} + +/** + * mei_me_pg_exit_sync - perform runtime pm exit procedure + * + * @dev: the device structure + * + * Return: 0 on success an error code otherwise + */ +int mei_me_pg_exit_sync(struct mei_device *dev) +{ + struct mei_me_hw *hw = to_me_hw(dev); + + if (hw->d0i3_supported) + return mei_me_d0i3_exit_sync(dev); + else + return mei_me_pg_legacy_exit_sync(dev); +} + +/** + * mei_me_hw_reset - resets fw via mei csr register. + * + * @dev: the device structure + * @intr_enable: if interrupt should be enabled after reset. + * + * Return: 0 on success an error code otherwise + */ +static int mei_me_hw_reset(struct mei_device *dev, bool intr_enable) +{ + struct mei_me_hw *hw = to_me_hw(dev); + int ret; + u32 hcsr; + + if (intr_enable) { + mei_me_intr_enable(dev); + if (hw->d0i3_supported) { + ret = mei_me_d0i3_exit_sync(dev); + if (ret) + return ret; + } else { + hw->pg_state = MEI_PG_OFF; + } + } + + pm_runtime_set_active(dev->dev); + + hcsr = mei_hcsr_read(dev); + /* H_RST may be found lit before reset is started, + * for example if preceding reset flow hasn't completed. + * In that case asserting H_RST will be ignored, therefore + * we need to clean H_RST bit to start a successful reset sequence. + */ + if ((hcsr & H_RST) == H_RST) { + dev_warn(dev->dev, "H_RST is set = 0x%08X", hcsr); + hcsr &= ~H_RST; + mei_hcsr_set(dev, hcsr); + hcsr = mei_hcsr_read(dev); + } + + hcsr |= H_RST | H_IG | H_CSR_IS_MASK; + + if (!intr_enable || mei_me_hw_use_polling(to_me_hw(dev))) + hcsr &= ~H_CSR_IE_MASK; + + dev->recvd_hw_ready = false; + mei_hcsr_write(dev, hcsr); + + /* + * Host reads the H_CSR once to ensure that the + * posted write to H_CSR completes. + */ + hcsr = mei_hcsr_read(dev); + + if ((hcsr & H_RST) == 0) + dev_warn(dev->dev, "H_RST is not set = 0x%08X", hcsr); + + if ((hcsr & H_RDY) == H_RDY) + dev_warn(dev->dev, "H_RDY is not cleared 0x%08X", hcsr); + + if (!intr_enable) { + mei_me_hw_reset_release(dev); + if (hw->d0i3_supported) { + ret = mei_me_d0i3_enter(dev); + if (ret) + return ret; + } + } + return 0; +} + +/** + * mei_me_irq_quick_handler - The ISR of the MEI device + * + * @irq: The irq number + * @dev_id: pointer to the device structure + * + * Return: irqreturn_t + */ +irqreturn_t mei_me_irq_quick_handler(int irq, void *dev_id) +{ + struct mei_device *dev = (struct mei_device *)dev_id; + u32 hcsr; + + hcsr = mei_hcsr_read(dev); + if (!me_intr_src(hcsr)) + return IRQ_NONE; + + dev_dbg(dev->dev, "interrupt source 0x%08X\n", me_intr_src(hcsr)); + + /* disable interrupts on device */ + me_intr_disable(dev, hcsr); + return IRQ_WAKE_THREAD; +} +EXPORT_SYMBOL_GPL(mei_me_irq_quick_handler); + +/** + * mei_me_irq_thread_handler - function called after ISR to handle the interrupt + * processing. + * + * @irq: The irq number + * @dev_id: pointer to the device structure + * + * Return: irqreturn_t + * + */ +irqreturn_t mei_me_irq_thread_handler(int irq, void *dev_id) +{ + struct mei_device *dev = (struct mei_device *) dev_id; + struct list_head cmpl_list; + s32 slots; + u32 hcsr; + int rets = 0; + + dev_dbg(dev->dev, "function called after ISR to handle the interrupt processing.\n"); + /* initialize our complete list */ + mutex_lock(&dev->device_lock); + + hcsr = mei_hcsr_read(dev); + me_intr_clear(dev, hcsr); + + INIT_LIST_HEAD(&cmpl_list); + + /* check if ME wants a reset */ + if (!mei_hw_is_ready(dev) && dev->dev_state != MEI_DEV_RESETTING) { + dev_warn(dev->dev, "FW not ready: resetting: dev_state = %d pxp = %d\n", + dev->dev_state, dev->pxp_mode); + if (dev->dev_state == MEI_DEV_POWERING_DOWN || + dev->dev_state == MEI_DEV_POWER_DOWN) + mei_cl_all_disconnect(dev); + else if (dev->dev_state != MEI_DEV_DISABLED) + schedule_work(&dev->reset_work); + goto end; + } + + if (mei_me_hw_is_resetting(dev)) + mei_hcsr_set_hig(dev); + + mei_me_pg_intr(dev, me_intr_src(hcsr)); + + /* check if we need to start the dev */ + if (!mei_host_is_ready(dev)) { + if (mei_hw_is_ready(dev)) { + dev_dbg(dev->dev, "we need to start the dev.\n"); + dev->recvd_hw_ready = true; + wake_up(&dev->wait_hw_ready); + } else { + dev_dbg(dev->dev, "Spurious Interrupt\n"); + } + goto end; + } + /* check slots available for reading */ + slots = mei_count_full_read_slots(dev); + while (slots > 0) { + dev_dbg(dev->dev, "slots to read = %08x\n", slots); + rets = mei_irq_read_handler(dev, &cmpl_list, &slots); + /* There is a race between ME write and interrupt delivery: + * Not all data is always available immediately after the + * interrupt, so try to read again on the next interrupt. + */ + if (rets == -ENODATA) + break; + + if (rets) { + dev_err(dev->dev, "mei_irq_read_handler ret = %d, state = %d.\n", + rets, dev->dev_state); + if (dev->dev_state != MEI_DEV_RESETTING && + dev->dev_state != MEI_DEV_DISABLED && + dev->dev_state != MEI_DEV_POWERING_DOWN && + dev->dev_state != MEI_DEV_POWER_DOWN) + schedule_work(&dev->reset_work); + goto end; + } + } + + dev->hbuf_is_ready = mei_hbuf_is_ready(dev); + + /* + * During PG handshake only allowed write is the replay to the + * PG exit message, so block calling write function + * if the pg event is in PG handshake + */ + if (dev->pg_event != MEI_PG_EVENT_WAIT && + dev->pg_event != MEI_PG_EVENT_RECEIVED) { + rets = mei_irq_write_handler(dev, &cmpl_list); + dev->hbuf_is_ready = mei_hbuf_is_ready(dev); + } + + mei_irq_compl_handler(dev, &cmpl_list); + +end: + dev_dbg(dev->dev, "interrupt thread end ret = %d\n", rets); + mei_me_intr_enable(dev); + mutex_unlock(&dev->device_lock); + return IRQ_HANDLED; +} +EXPORT_SYMBOL_GPL(mei_me_irq_thread_handler); + +#define MEI_POLLING_TIMEOUT_ACTIVE 100 +#define MEI_POLLING_TIMEOUT_IDLE 500 + +/** + * mei_me_polling_thread - interrupt register polling thread + * + * The thread monitors the interrupt source register and calls + * mei_me_irq_thread_handler() to handle the firmware + * input. + * + * The function polls in MEI_POLLING_TIMEOUT_ACTIVE timeout + * in case there was an event, in idle case the polling + * time increases yet again by MEI_POLLING_TIMEOUT_ACTIVE + * up to MEI_POLLING_TIMEOUT_IDLE. + * + * @_dev: mei device + * + * Return: always 0 + */ +int mei_me_polling_thread(void *_dev) +{ + struct mei_device *dev = _dev; + irqreturn_t irq_ret; + long polling_timeout = MEI_POLLING_TIMEOUT_ACTIVE; + + dev_dbg(dev->dev, "kernel thread is running\n"); + while (!kthread_should_stop()) { + struct mei_me_hw *hw = to_me_hw(dev); + u32 hcsr; + + wait_event_timeout(hw->wait_active, + hw->is_active || kthread_should_stop(), + msecs_to_jiffies(MEI_POLLING_TIMEOUT_IDLE)); + + if (kthread_should_stop()) + break; + + hcsr = mei_hcsr_read(dev); + if (me_intr_src(hcsr)) { + polling_timeout = MEI_POLLING_TIMEOUT_ACTIVE; + irq_ret = mei_me_irq_thread_handler(1, dev); + if (irq_ret != IRQ_HANDLED) + dev_err(dev->dev, "irq_ret %d\n", irq_ret); + } else { + /* + * Increase timeout by MEI_POLLING_TIMEOUT_ACTIVE + * up to MEI_POLLING_TIMEOUT_IDLE + */ + polling_timeout = clamp_val(polling_timeout + MEI_POLLING_TIMEOUT_ACTIVE, + MEI_POLLING_TIMEOUT_ACTIVE, + MEI_POLLING_TIMEOUT_IDLE); + } + + schedule_timeout_interruptible(msecs_to_jiffies(polling_timeout)); + } + + return 0; +} +EXPORT_SYMBOL_GPL(mei_me_polling_thread); + +static const struct mei_hw_ops mei_me_hw_ops = { + + .trc_status = mei_me_trc_status, + .fw_status = mei_me_fw_status, + .pg_state = mei_me_pg_state, + + .host_is_ready = mei_me_host_is_ready, + + .hw_is_ready = mei_me_hw_is_ready, + .hw_reset = mei_me_hw_reset, + .hw_config = mei_me_hw_config, + .hw_start = mei_me_hw_start, + + .pg_in_transition = mei_me_pg_in_transition, + .pg_is_enabled = mei_me_pg_is_enabled, + + .intr_clear = mei_me_intr_clear, + .intr_enable = mei_me_intr_enable, + .intr_disable = mei_me_intr_disable, + .synchronize_irq = mei_me_synchronize_irq, + + .hbuf_free_slots = mei_me_hbuf_empty_slots, + .hbuf_is_ready = mei_me_hbuf_is_empty, + .hbuf_depth = mei_me_hbuf_depth, + + .write = mei_me_hbuf_write, + + .rdbuf_full_slots = mei_me_count_full_read_slots, + .read_hdr = mei_me_mecbrw_read, + .read = mei_me_read_slots +}; + +/** + * mei_me_fw_type_nm() - check for nm sku + * + * Read ME FW Status register to check for the Node Manager (NM) Firmware. + * The NM FW is only signaled in PCI function 0. + * __Note__: Deprecated by PCH8 and newer. + * + * @pdev: pci device + * + * Return: true in case of NM firmware + */ +static bool mei_me_fw_type_nm(const struct pci_dev *pdev) +{ + u32 reg; + unsigned int devfn; + + devfn = PCI_DEVFN(PCI_SLOT(pdev->devfn), 0); + pci_bus_read_config_dword(pdev->bus, devfn, PCI_CFG_HFS_2, ®); + trace_mei_pci_cfg_read(&pdev->dev, "PCI_CFG_HFS_2", PCI_CFG_HFS_2, reg); + /* make sure that bit 9 (NM) is up and bit 10 (DM) is down */ + return (reg & 0x600) == 0x200; +} + +#define MEI_CFG_FW_NM \ + .quirk_probe = mei_me_fw_type_nm + +/** + * mei_me_fw_type_sps_4() - check for sps 4.0 sku + * + * Read ME FW Status register to check for SPS Firmware. + * The SPS FW is only signaled in the PCI function 0. + * __Note__: Deprecated by SPS 5.0 and newer. + * + * @pdev: pci device + * + * Return: true in case of SPS firmware + */ +static bool mei_me_fw_type_sps_4(const struct pci_dev *pdev) +{ + u32 reg; + unsigned int devfn; + + devfn = PCI_DEVFN(PCI_SLOT(pdev->devfn), 0); + pci_bus_read_config_dword(pdev->bus, devfn, PCI_CFG_HFS_1, ®); + trace_mei_pci_cfg_read(&pdev->dev, "PCI_CFG_HFS_1", PCI_CFG_HFS_1, reg); + return (reg & PCI_CFG_HFS_1_OPMODE_MSK) == PCI_CFG_HFS_1_OPMODE_SPS; +} + +#define MEI_CFG_FW_SPS_4 \ + .quirk_probe = mei_me_fw_type_sps_4 + +/** + * mei_me_fw_type_sps_ign() - check for sps or ign sku + * + * Read ME FW Status register to check for SPS or IGN Firmware. + * The SPS/IGN FW is only signaled in pci function 0 + * + * @pdev: pci device + * + * Return: true in case of SPS/IGN firmware + */ +static bool mei_me_fw_type_sps_ign(const struct pci_dev *pdev) +{ + u32 reg; + u32 fw_type; + unsigned int devfn; + + devfn = PCI_DEVFN(PCI_SLOT(pdev->devfn), 0); + pci_bus_read_config_dword(pdev->bus, devfn, PCI_CFG_HFS_3, ®); + trace_mei_pci_cfg_read(&pdev->dev, "PCI_CFG_HFS_3", PCI_CFG_HFS_3, reg); + fw_type = (reg & PCI_CFG_HFS_3_FW_SKU_MSK); + + dev_dbg(&pdev->dev, "fw type is %d\n", fw_type); + + return fw_type == PCI_CFG_HFS_3_FW_SKU_IGN || + fw_type == PCI_CFG_HFS_3_FW_SKU_SPS; +} + +#define MEI_CFG_KIND_ITOUCH \ + .kind = "itouch" + +#define MEI_CFG_TYPE_GSC \ + .kind = "gsc" + +#define MEI_CFG_TYPE_GSCFI \ + .kind = "gscfi" + +#define MEI_CFG_FW_SPS_IGN \ + .quirk_probe = mei_me_fw_type_sps_ign + +#define MEI_CFG_FW_VER_SUPP \ + .fw_ver_supported = 1 + +#define MEI_CFG_ICH_HFS \ + .fw_status.count = 0 + +#define MEI_CFG_ICH10_HFS \ + .fw_status.count = 1, \ + .fw_status.status[0] = PCI_CFG_HFS_1 + +#define MEI_CFG_PCH_HFS \ + .fw_status.count = 2, \ + .fw_status.status[0] = PCI_CFG_HFS_1, \ + .fw_status.status[1] = PCI_CFG_HFS_2 + +#define MEI_CFG_PCH8_HFS \ + .fw_status.count = 6, \ + .fw_status.status[0] = PCI_CFG_HFS_1, \ + .fw_status.status[1] = PCI_CFG_HFS_2, \ + .fw_status.status[2] = PCI_CFG_HFS_3, \ + .fw_status.status[3] = PCI_CFG_HFS_4, \ + .fw_status.status[4] = PCI_CFG_HFS_5, \ + .fw_status.status[5] = PCI_CFG_HFS_6 + +#define MEI_CFG_DMA_128 \ + .dma_size[DMA_DSCR_HOST] = SZ_128K, \ + .dma_size[DMA_DSCR_DEVICE] = SZ_128K, \ + .dma_size[DMA_DSCR_CTRL] = PAGE_SIZE + +#define MEI_CFG_TRC \ + .hw_trc_supported = 1 + +/* ICH Legacy devices */ +static const struct mei_cfg mei_me_ich_cfg = { + MEI_CFG_ICH_HFS, +}; + +/* ICH devices */ +static const struct mei_cfg mei_me_ich10_cfg = { + MEI_CFG_ICH10_HFS, +}; + +/* PCH6 devices */ +static const struct mei_cfg mei_me_pch6_cfg = { + MEI_CFG_PCH_HFS, +}; + +/* PCH7 devices */ +static const struct mei_cfg mei_me_pch7_cfg = { + MEI_CFG_PCH_HFS, + MEI_CFG_FW_VER_SUPP, +}; + +/* PCH Cougar Point and Patsburg with quirk for Node Manager exclusion */ +static const struct mei_cfg mei_me_pch_cpt_pbg_cfg = { + MEI_CFG_PCH_HFS, + MEI_CFG_FW_VER_SUPP, + MEI_CFG_FW_NM, +}; + +/* PCH8 Lynx Point and newer devices */ +static const struct mei_cfg mei_me_pch8_cfg = { + MEI_CFG_PCH8_HFS, + MEI_CFG_FW_VER_SUPP, +}; + +/* PCH8 Lynx Point and newer devices - iTouch */ +static const struct mei_cfg mei_me_pch8_itouch_cfg = { + MEI_CFG_KIND_ITOUCH, + MEI_CFG_PCH8_HFS, + MEI_CFG_FW_VER_SUPP, +}; + +/* PCH8 Lynx Point with quirk for SPS Firmware exclusion */ +static const struct mei_cfg mei_me_pch8_sps_4_cfg = { + MEI_CFG_PCH8_HFS, + MEI_CFG_FW_VER_SUPP, + MEI_CFG_FW_SPS_4, +}; + +/* LBG with quirk for SPS (4.0) Firmware exclusion */ +static const struct mei_cfg mei_me_pch12_sps_4_cfg = { + MEI_CFG_PCH8_HFS, + MEI_CFG_FW_VER_SUPP, + MEI_CFG_FW_SPS_4, +}; + +/* Cannon Lake and newer devices */ +static const struct mei_cfg mei_me_pch12_cfg = { + MEI_CFG_PCH8_HFS, + MEI_CFG_FW_VER_SUPP, + MEI_CFG_DMA_128, +}; + +/* Cannon Lake with quirk for SPS 5.0 and newer Firmware exclusion */ +static const struct mei_cfg mei_me_pch12_sps_cfg = { + MEI_CFG_PCH8_HFS, + MEI_CFG_FW_VER_SUPP, + MEI_CFG_DMA_128, + MEI_CFG_FW_SPS_IGN, +}; + +/* Cannon Lake itouch with quirk for SPS 5.0 and newer Firmware exclusion + * w/o DMA support. + */ +static const struct mei_cfg mei_me_pch12_itouch_sps_cfg = { + MEI_CFG_KIND_ITOUCH, + MEI_CFG_PCH8_HFS, + MEI_CFG_FW_VER_SUPP, + MEI_CFG_FW_SPS_IGN, +}; + +/* Tiger Lake and newer devices */ +static const struct mei_cfg mei_me_pch15_cfg = { + MEI_CFG_PCH8_HFS, + MEI_CFG_FW_VER_SUPP, + MEI_CFG_DMA_128, + MEI_CFG_TRC, +}; + +/* Tiger Lake with quirk for SPS 5.0 and newer Firmware exclusion */ +static const struct mei_cfg mei_me_pch15_sps_cfg = { + MEI_CFG_PCH8_HFS, + MEI_CFG_FW_VER_SUPP, + MEI_CFG_DMA_128, + MEI_CFG_TRC, + MEI_CFG_FW_SPS_IGN, +}; + +/* Graphics System Controller */ +static const struct mei_cfg mei_me_gsc_cfg = { + MEI_CFG_TYPE_GSC, + MEI_CFG_PCH8_HFS, + MEI_CFG_FW_VER_SUPP, +}; + +/* Graphics System Controller Firmware Interface */ +static const struct mei_cfg mei_me_gscfi_cfg = { + MEI_CFG_TYPE_GSCFI, + MEI_CFG_PCH8_HFS, + MEI_CFG_FW_VER_SUPP, +}; + +/* + * mei_cfg_list - A list of platform platform specific configurations. + * Note: has to be synchronized with enum mei_cfg_idx. + */ +static const struct mei_cfg *const mei_cfg_list[] = { + [MEI_ME_UNDEF_CFG] = NULL, + [MEI_ME_ICH_CFG] = &mei_me_ich_cfg, + [MEI_ME_ICH10_CFG] = &mei_me_ich10_cfg, + [MEI_ME_PCH6_CFG] = &mei_me_pch6_cfg, + [MEI_ME_PCH7_CFG] = &mei_me_pch7_cfg, + [MEI_ME_PCH_CPT_PBG_CFG] = &mei_me_pch_cpt_pbg_cfg, + [MEI_ME_PCH8_CFG] = &mei_me_pch8_cfg, + [MEI_ME_PCH8_ITOUCH_CFG] = &mei_me_pch8_itouch_cfg, + [MEI_ME_PCH8_SPS_4_CFG] = &mei_me_pch8_sps_4_cfg, + [MEI_ME_PCH12_CFG] = &mei_me_pch12_cfg, + [MEI_ME_PCH12_SPS_4_CFG] = &mei_me_pch12_sps_4_cfg, + [MEI_ME_PCH12_SPS_CFG] = &mei_me_pch12_sps_cfg, + [MEI_ME_PCH12_SPS_ITOUCH_CFG] = &mei_me_pch12_itouch_sps_cfg, + [MEI_ME_PCH15_CFG] = &mei_me_pch15_cfg, + [MEI_ME_PCH15_SPS_CFG] = &mei_me_pch15_sps_cfg, + [MEI_ME_GSC_CFG] = &mei_me_gsc_cfg, + [MEI_ME_GSCFI_CFG] = &mei_me_gscfi_cfg, +}; + +const struct mei_cfg *mei_me_get_cfg(kernel_ulong_t idx) +{ + BUILD_BUG_ON(ARRAY_SIZE(mei_cfg_list) != MEI_ME_NUM_CFG); + + if (idx >= MEI_ME_NUM_CFG) + return NULL; + + return mei_cfg_list[idx]; +} +EXPORT_SYMBOL_GPL(mei_me_get_cfg); + +/** + * mei_me_dev_init - allocates and initializes the mei device structure + * + * @parent: device associated with physical device (pci/platform) + * @cfg: per device generation config + * @slow_fw: configure longer timeouts as FW is slow + * + * Return: The mei_device pointer on success, NULL on failure. + */ +struct mei_device *mei_me_dev_init(struct device *parent, + const struct mei_cfg *cfg, bool slow_fw) +{ + struct mei_device *dev; + struct mei_me_hw *hw; + int i; + + dev = devm_kzalloc(parent, sizeof(*dev) + sizeof(*hw), GFP_KERNEL); + if (!dev) + return NULL; + + hw = to_me_hw(dev); + + for (i = 0; i < DMA_DSCR_NUM; i++) + dev->dr_dscr[i].size = cfg->dma_size[i]; + + mei_device_init(dev, parent, slow_fw, &mei_me_hw_ops); + hw->cfg = cfg; + + dev->fw_f_fw_ver_supported = cfg->fw_ver_supported; + + dev->kind = cfg->kind; + + return dev; +} +EXPORT_SYMBOL_GPL(mei_me_dev_init); diff --git a/drivers/misc/mei/hw-me.h b/drivers/misc/mei/hw-me.h new file mode 100644 index 0000000000..95cf830b7c --- /dev/null +++ b/drivers/misc/mei/hw-me.h @@ -0,0 +1,144 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (c) 2012-2022, Intel Corporation. All rights reserved. + * Intel Management Engine Interface (Intel MEI) Linux driver + */ + +#ifndef _MEI_INTERFACE_H_ +#define _MEI_INTERFACE_H_ + +#include <linux/irqreturn.h> +#include <linux/pci.h> +#include <linux/mei.h> + +#include "mei_dev.h" +#include "client.h" + +/* + * mei_cfg - mei device configuration + * + * @fw_status: FW status + * @quirk_probe: device exclusion quirk + * @kind: MEI head kind + * @dma_size: device DMA buffers size + * @fw_ver_supported: is fw version retrievable from FW + * @hw_trc_supported: does the hw support trc register + */ +struct mei_cfg { + const struct mei_fw_status fw_status; + bool (*quirk_probe)(const struct pci_dev *pdev); + const char *kind; + size_t dma_size[DMA_DSCR_NUM]; + u32 fw_ver_supported:1; + u32 hw_trc_supported:1; +}; + + +#define MEI_PCI_DEVICE(dev, cfg) \ + .vendor = PCI_VENDOR_ID_INTEL, .device = (dev), \ + .subvendor = PCI_ANY_ID, .subdevice = PCI_ANY_ID, \ + .driver_data = (kernel_ulong_t)(cfg), + +#define MEI_ME_RPM_TIMEOUT 500 /* ms */ + +/** + * struct mei_me_hw - me hw specific data + * + * @cfg: per device generation config and ops + * @mem_addr: io memory address + * @irq: irq number + * @pg_state: power gating state + * @d0i3_supported: di03 support + * @hbuf_depth: depth of hardware host/write buffer in slots + * @read_fws: read FW status register handler + * @polling_thread: interrupt polling thread + * @wait_active: the polling thread activity wait queue + * @is_active: the device is active + */ +struct mei_me_hw { + const struct mei_cfg *cfg; + void __iomem *mem_addr; + int irq; + enum mei_pg_state pg_state; + bool d0i3_supported; + u8 hbuf_depth; + int (*read_fws)(const struct mei_device *dev, int where, u32 *val); + /* polling */ + struct task_struct *polling_thread; + wait_queue_head_t wait_active; + bool is_active; +}; + +#define to_me_hw(dev) (struct mei_me_hw *)((dev)->hw) + +static inline bool mei_me_hw_use_polling(const struct mei_me_hw *hw) +{ + return hw->irq < 0; +} + +/** + * enum mei_cfg_idx - indices to platform specific configurations. + * + * Note: has to be synchronized with mei_cfg_list[] + * + * @MEI_ME_UNDEF_CFG: Lower sentinel. + * @MEI_ME_ICH_CFG: I/O Controller Hub legacy devices. + * @MEI_ME_ICH10_CFG: I/O Controller Hub platforms Gen10 + * @MEI_ME_PCH6_CFG: Platform Controller Hub platforms (Gen6). + * @MEI_ME_PCH7_CFG: Platform Controller Hub platforms (Gen7). + * @MEI_ME_PCH_CPT_PBG_CFG:Platform Controller Hub workstations + * with quirk for Node Manager exclusion. + * @MEI_ME_PCH8_CFG: Platform Controller Hub Gen8 and newer + * client platforms. + * @MEI_ME_PCH8_ITOUCH_CFG:Platform Controller Hub Gen8 and newer + * client platforms (iTouch). + * @MEI_ME_PCH8_SPS_4_CFG: Platform Controller Hub Gen8 and newer + * servers platforms with quirk for + * SPS firmware exclusion. + * @MEI_ME_PCH12_CFG: Platform Controller Hub Gen12 and newer + * @MEI_ME_PCH12_SPS_4_CFG:Platform Controller Hub Gen12 up to 4.0 + * servers platforms with quirk for + * SPS firmware exclusion. + * @MEI_ME_PCH12_SPS_CFG: Platform Controller Hub Gen12 5.0 and newer + * servers platforms with quirk for + * SPS firmware exclusion. + * @MEI_ME_PCH15_CFG: Platform Controller Hub Gen15 and newer + * @MEI_ME_PCH15_SPS_CFG: Platform Controller Hub Gen15 and newer + * servers platforms with quirk for + * SPS firmware exclusion. + * @MEI_ME_NUM_CFG: Upper Sentinel. + */ +enum mei_cfg_idx { + MEI_ME_UNDEF_CFG, + MEI_ME_ICH_CFG, + MEI_ME_ICH10_CFG, + MEI_ME_PCH6_CFG, + MEI_ME_PCH7_CFG, + MEI_ME_PCH_CPT_PBG_CFG, + MEI_ME_PCH8_CFG, + MEI_ME_PCH8_ITOUCH_CFG, + MEI_ME_PCH8_SPS_4_CFG, + MEI_ME_PCH12_CFG, + MEI_ME_PCH12_SPS_4_CFG, + MEI_ME_PCH12_SPS_CFG, + MEI_ME_PCH12_SPS_ITOUCH_CFG, + MEI_ME_PCH15_CFG, + MEI_ME_PCH15_SPS_CFG, + MEI_ME_GSC_CFG, + MEI_ME_GSCFI_CFG, + MEI_ME_NUM_CFG, +}; + +const struct mei_cfg *mei_me_get_cfg(kernel_ulong_t idx); + +struct mei_device *mei_me_dev_init(struct device *parent, + const struct mei_cfg *cfg, bool slow_fw); + +int mei_me_pg_enter_sync(struct mei_device *dev); +int mei_me_pg_exit_sync(struct mei_device *dev); + +irqreturn_t mei_me_irq_quick_handler(int irq, void *dev_id); +irqreturn_t mei_me_irq_thread_handler(int irq, void *dev_id); +int mei_me_polling_thread(void *_dev); + +#endif /* _MEI_INTERFACE_H_ */ diff --git a/drivers/misc/mei/hw-txe-regs.h b/drivers/misc/mei/hw-txe-regs.h new file mode 100644 index 0000000000..a92b306dac --- /dev/null +++ b/drivers/misc/mei/hw-txe-regs.h @@ -0,0 +1,239 @@ +/* SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause */ +/* + * Copyright (c) 2013-2014, Intel Corporation. All rights reserved. + * Intel Management Engine Interface (Intel MEI) Linux driver + */ +#ifndef _MEI_HW_TXE_REGS_H_ +#define _MEI_HW_TXE_REGS_H_ + +#include "hw.h" + +#define SEC_ALIVENESS_TIMER_TIMEOUT (5 * MSEC_PER_SEC) +#define SEC_ALIVENESS_WAIT_TIMEOUT (1 * MSEC_PER_SEC) +#define SEC_RESET_WAIT_TIMEOUT (1 * MSEC_PER_SEC) +#define SEC_READY_WAIT_TIMEOUT (5 * MSEC_PER_SEC) +#define START_MESSAGE_RESPONSE_WAIT_TIMEOUT (5 * MSEC_PER_SEC) +#define RESET_CANCEL_WAIT_TIMEOUT (1 * MSEC_PER_SEC) + +enum { + SEC_BAR, + BRIDGE_BAR, + + NUM_OF_MEM_BARS +}; + +/* SeC FW Status Register + * + * FW uses this register in order to report its status to host. + * This register resides in PCI-E config space. + */ +#define PCI_CFG_TXE_FW_STS0 0x40 +# define PCI_CFG_TXE_FW_STS0_WRK_ST_MSK 0x0000000F +# define PCI_CFG_TXE_FW_STS0_OP_ST_MSK 0x000001C0 +# define PCI_CFG_TXE_FW_STS0_FW_INIT_CMPLT 0x00000200 +# define PCI_CFG_TXE_FW_STS0_ERR_CODE_MSK 0x0000F000 +# define PCI_CFG_TXE_FW_STS0_OP_MODE_MSK 0x000F0000 +# define PCI_CFG_TXE_FW_STS0_RST_CNT_MSK 0x00F00000 +#define PCI_CFG_TXE_FW_STS1 0x48 + +#define IPC_BASE_ADDR 0x80400 /* SeC IPC Base Address */ + +/* IPC Input Doorbell Register */ +#define SEC_IPC_INPUT_DOORBELL_REG (0x0000 + IPC_BASE_ADDR) + +/* IPC Input Status Register + * This register indicates whether or not processing of + * the most recent command has been completed by the SEC + * New commands and payloads should not be written by the Host + * until this indicates that the previous command has been processed. + */ +#define SEC_IPC_INPUT_STATUS_REG (0x0008 + IPC_BASE_ADDR) +# define SEC_IPC_INPUT_STATUS_RDY BIT(0) + +/* IPC Host Interrupt Status Register */ +#define SEC_IPC_HOST_INT_STATUS_REG (0x0010 + IPC_BASE_ADDR) +#define SEC_IPC_HOST_INT_STATUS_OUT_DB BIT(0) +#define SEC_IPC_HOST_INT_STATUS_IN_RDY BIT(1) +#define SEC_IPC_HOST_INT_STATUS_HDCP_M0_RCVD BIT(5) +#define SEC_IPC_HOST_INT_STATUS_ILL_MEM_ACCESS BIT(17) +#define SEC_IPC_HOST_INT_STATUS_AES_HKEY_ERR BIT(18) +#define SEC_IPC_HOST_INT_STATUS_DES_HKEY_ERR BIT(19) +#define SEC_IPC_HOST_INT_STATUS_TMRMTB_OVERFLOW BIT(21) + +/* Convenient mask for pending interrupts */ +#define SEC_IPC_HOST_INT_STATUS_PENDING \ + (SEC_IPC_HOST_INT_STATUS_OUT_DB| \ + SEC_IPC_HOST_INT_STATUS_IN_RDY) + +/* IPC Host Interrupt Mask Register */ +#define SEC_IPC_HOST_INT_MASK_REG (0x0014 + IPC_BASE_ADDR) + +# define SEC_IPC_HOST_INT_MASK_OUT_DB BIT(0) /* Output Doorbell Int Mask */ +# define SEC_IPC_HOST_INT_MASK_IN_RDY BIT(1) /* Input Ready Int Mask */ + +/* IPC Input Payload RAM */ +#define SEC_IPC_INPUT_PAYLOAD_REG (0x0100 + IPC_BASE_ADDR) +/* IPC Shared Payload RAM */ +#define IPC_SHARED_PAYLOAD_REG (0x0200 + IPC_BASE_ADDR) + +/* SeC Address Translation Table Entry 2 - Ctrl + * + * This register resides also in SeC's PCI-E Memory space. + */ +#define SATT2_CTRL_REG 0x1040 +# define SATT2_CTRL_VALID_MSK BIT(0) +# define SATT2_CTRL_BR_BASE_ADDR_REG_SHIFT 8 +# define SATT2_CTRL_BRIDGE_HOST_EN_MSK BIT(12) + +/* SATT Table Entry 2 SAP Base Address Register */ +#define SATT2_SAP_BA_REG 0x1044 +/* SATT Table Entry 2 SAP Size Register. */ +#define SATT2_SAP_SIZE_REG 0x1048 + /* SATT Table Entry 2 SAP Bridge Address - LSB Register */ +#define SATT2_BRG_BA_LSB_REG 0x104C + +/* Host High-level Interrupt Status Register */ +#define HHISR_REG 0x2020 +/* Host High-level Interrupt Enable Register + * + * Resides in PCI memory space. This is the top hierarchy for + * interrupts from SeC to host, aggregating both interrupts that + * arrive through HICR registers as well as interrupts + * that arrive via IPC. + */ +#define HHIER_REG 0x2024 +#define IPC_HHIER_SEC BIT(0) +#define IPC_HHIER_BRIDGE BIT(1) +#define IPC_HHIER_MSK (IPC_HHIER_SEC | IPC_HHIER_BRIDGE) + +/* Host High-level Interrupt Mask Register. + * + * Resides in PCI memory space. + * This is the top hierarchy for masking interrupts from SeC to host. + */ +#define HHIMR_REG 0x2028 +#define IPC_HHIMR_SEC BIT(0) +#define IPC_HHIMR_BRIDGE BIT(1) + +/* Host High-level IRQ Status Register */ +#define HHIRQSR_REG 0x202C + +/* Host Interrupt Cause Register 0 - SeC IPC Readiness + * + * This register is both an ICR to Host from PCI Memory Space + * and it is also exposed in the SeC memory space. + * This register is used by SeC's IPC driver in order + * to synchronize with host about IPC interface state. + */ +#define HICR_SEC_IPC_READINESS_REG 0x2040 +#define HICR_SEC_IPC_READINESS_HOST_RDY BIT(0) +#define HICR_SEC_IPC_READINESS_SEC_RDY BIT(1) +#define HICR_SEC_IPC_READINESS_SYS_RDY \ + (HICR_SEC_IPC_READINESS_HOST_RDY | \ + HICR_SEC_IPC_READINESS_SEC_RDY) +#define HICR_SEC_IPC_READINESS_RDY_CLR BIT(2) + +/* Host Interrupt Cause Register 1 - Aliveness Response */ +/* This register is both an ICR to Host from PCI Memory Space + * and it is also exposed in the SeC memory space. + * The register may be used by SeC to ACK a host request for aliveness. + */ +#define HICR_HOST_ALIVENESS_RESP_REG 0x2044 +#define HICR_HOST_ALIVENESS_RESP_ACK BIT(0) + +/* Host Interrupt Cause Register 2 - SeC IPC Output Doorbell */ +#define HICR_SEC_IPC_OUTPUT_DOORBELL_REG 0x2048 + +/* Host Interrupt Status Register. + * + * Resides in PCI memory space. + * This is the main register involved in generating interrupts + * from SeC to host via HICRs. + * The interrupt generation rules are as follows: + * An interrupt will be generated whenever for any i, + * there is a transition from a state where at least one of + * the following conditions did not hold, to a state where + * ALL the following conditions hold: + * A) HISR.INT[i]_STS == 1. + * B) HIER.INT[i]_EN == 1. + */ +#define HISR_REG 0x2060 +#define HISR_INT_0_STS BIT(0) +#define HISR_INT_1_STS BIT(1) +#define HISR_INT_2_STS BIT(2) +#define HISR_INT_3_STS BIT(3) +#define HISR_INT_4_STS BIT(4) +#define HISR_INT_5_STS BIT(5) +#define HISR_INT_6_STS BIT(6) +#define HISR_INT_7_STS BIT(7) +#define HISR_INT_STS_MSK \ + (HISR_INT_0_STS | HISR_INT_1_STS | HISR_INT_2_STS) + +/* Host Interrupt Enable Register. Resides in PCI memory space. */ +#define HIER_REG 0x2064 +#define HIER_INT_0_EN BIT(0) +#define HIER_INT_1_EN BIT(1) +#define HIER_INT_2_EN BIT(2) +#define HIER_INT_3_EN BIT(3) +#define HIER_INT_4_EN BIT(4) +#define HIER_INT_5_EN BIT(5) +#define HIER_INT_6_EN BIT(6) +#define HIER_INT_7_EN BIT(7) + +#define HIER_INT_EN_MSK \ + (HIER_INT_0_EN | HIER_INT_1_EN | HIER_INT_2_EN) + + +/* SEC Memory Space IPC output payload. + * + * This register is part of the output payload which SEC provides to host. + */ +#define BRIDGE_IPC_OUTPUT_PAYLOAD_REG 0x20C0 + +/* SeC Interrupt Cause Register - Host Aliveness Request + * This register is both an ICR to SeC and it is also exposed + * in the host-visible PCI memory space. + * The register is used by host to request SeC aliveness. + */ +#define SICR_HOST_ALIVENESS_REQ_REG 0x214C +#define SICR_HOST_ALIVENESS_REQ_REQUESTED BIT(0) + + +/* SeC Interrupt Cause Register - Host IPC Readiness + * + * This register is both an ICR to SeC and it is also exposed + * in the host-visible PCI memory space. + * This register is used by the host's SeC driver uses in order + * to synchronize with SeC about IPC interface state. + */ +#define SICR_HOST_IPC_READINESS_REQ_REG 0x2150 + + +#define SICR_HOST_IPC_READINESS_HOST_RDY BIT(0) +#define SICR_HOST_IPC_READINESS_SEC_RDY BIT(1) +#define SICR_HOST_IPC_READINESS_SYS_RDY \ + (SICR_HOST_IPC_READINESS_HOST_RDY | \ + SICR_HOST_IPC_READINESS_SEC_RDY) +#define SICR_HOST_IPC_READINESS_RDY_CLR BIT(2) + +/* SeC Interrupt Cause Register - SeC IPC Output Status + * + * This register indicates whether or not processing of the most recent + * command has been completed by the Host. + * New commands and payloads should not be written by SeC until this + * register indicates that the previous command has been processed. + */ +#define SICR_SEC_IPC_OUTPUT_STATUS_REG 0x2154 +# define SEC_IPC_OUTPUT_STATUS_RDY BIT(0) + + + +/* MEI IPC Message payload size 64 bytes */ +#define PAYLOAD_SIZE 64 + +/* MAX size for SATT range 32MB */ +#define SATT_RANGE_MAX (32 << 20) + + +#endif /* _MEI_HW_TXE_REGS_H_ */ + diff --git a/drivers/misc/mei/hw-txe.c b/drivers/misc/mei/hw-txe.c new file mode 100644 index 0000000000..5d0f68b95c --- /dev/null +++ b/drivers/misc/mei/hw-txe.c @@ -0,0 +1,1256 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2013-2022, Intel Corporation. All rights reserved. + * Intel Management Engine Interface (Intel MEI) Linux driver + */ + +#include <linux/pci.h> +#include <linux/jiffies.h> +#include <linux/ktime.h> +#include <linux/delay.h> +#include <linux/kthread.h> +#include <linux/interrupt.h> +#include <linux/pm_runtime.h> + +#include <linux/mei.h> + +#include "mei_dev.h" +#include "hw-txe.h" +#include "client.h" +#include "hbm.h" + +#include "mei-trace.h" + +#define TXE_HBUF_DEPTH (PAYLOAD_SIZE / MEI_SLOT_SIZE) + +/** + * mei_txe_reg_read - Reads 32bit data from the txe device + * + * @base_addr: registers base address + * @offset: register offset + * + * Return: register value + */ +static inline u32 mei_txe_reg_read(void __iomem *base_addr, + unsigned long offset) +{ + return ioread32(base_addr + offset); +} + +/** + * mei_txe_reg_write - Writes 32bit data to the txe device + * + * @base_addr: registers base address + * @offset: register offset + * @value: the value to write + */ +static inline void mei_txe_reg_write(void __iomem *base_addr, + unsigned long offset, u32 value) +{ + iowrite32(value, base_addr + offset); +} + +/** + * mei_txe_sec_reg_read_silent - Reads 32bit data from the SeC BAR + * + * @hw: the txe hardware structure + * @offset: register offset + * + * Doesn't check for aliveness while Reads 32bit data from the SeC BAR + * + * Return: register value + */ +static inline u32 mei_txe_sec_reg_read_silent(struct mei_txe_hw *hw, + unsigned long offset) +{ + return mei_txe_reg_read(hw->mem_addr[SEC_BAR], offset); +} + +/** + * mei_txe_sec_reg_read - Reads 32bit data from the SeC BAR + * + * @hw: the txe hardware structure + * @offset: register offset + * + * Reads 32bit data from the SeC BAR and shout loud if aliveness is not set + * + * Return: register value + */ +static inline u32 mei_txe_sec_reg_read(struct mei_txe_hw *hw, + unsigned long offset) +{ + WARN(!hw->aliveness, "sec read: aliveness not asserted\n"); + return mei_txe_sec_reg_read_silent(hw, offset); +} +/** + * mei_txe_sec_reg_write_silent - Writes 32bit data to the SeC BAR + * doesn't check for aliveness + * + * @hw: the txe hardware structure + * @offset: register offset + * @value: value to write + * + * Doesn't check for aliveness while writes 32bit data from to the SeC BAR + */ +static inline void mei_txe_sec_reg_write_silent(struct mei_txe_hw *hw, + unsigned long offset, u32 value) +{ + mei_txe_reg_write(hw->mem_addr[SEC_BAR], offset, value); +} + +/** + * mei_txe_sec_reg_write - Writes 32bit data to the SeC BAR + * + * @hw: the txe hardware structure + * @offset: register offset + * @value: value to write + * + * Writes 32bit data from the SeC BAR and shout loud if aliveness is not set + */ +static inline void mei_txe_sec_reg_write(struct mei_txe_hw *hw, + unsigned long offset, u32 value) +{ + WARN(!hw->aliveness, "sec write: aliveness not asserted\n"); + mei_txe_sec_reg_write_silent(hw, offset, value); +} +/** + * mei_txe_br_reg_read - Reads 32bit data from the Bridge BAR + * + * @hw: the txe hardware structure + * @offset: offset from which to read the data + * + * Return: the byte read. + */ +static inline u32 mei_txe_br_reg_read(struct mei_txe_hw *hw, + unsigned long offset) +{ + return mei_txe_reg_read(hw->mem_addr[BRIDGE_BAR], offset); +} + +/** + * mei_txe_br_reg_write - Writes 32bit data to the Bridge BAR + * + * @hw: the txe hardware structure + * @offset: offset from which to write the data + * @value: the byte to write + */ +static inline void mei_txe_br_reg_write(struct mei_txe_hw *hw, + unsigned long offset, u32 value) +{ + mei_txe_reg_write(hw->mem_addr[BRIDGE_BAR], offset, value); +} + +/** + * mei_txe_aliveness_set - request for aliveness change + * + * @dev: the device structure + * @req: requested aliveness value + * + * Request for aliveness change and returns true if the change is + * really needed and false if aliveness is already + * in the requested state + * + * Locking: called under "dev->device_lock" lock + * + * Return: true if request was send + */ +static bool mei_txe_aliveness_set(struct mei_device *dev, u32 req) +{ + + struct mei_txe_hw *hw = to_txe_hw(dev); + bool do_req = hw->aliveness != req; + + dev_dbg(dev->dev, "Aliveness current=%d request=%d\n", + hw->aliveness, req); + if (do_req) { + dev->pg_event = MEI_PG_EVENT_WAIT; + mei_txe_br_reg_write(hw, SICR_HOST_ALIVENESS_REQ_REG, req); + } + return do_req; +} + + +/** + * mei_txe_aliveness_req_get - get aliveness requested register value + * + * @dev: the device structure + * + * Extract HICR_HOST_ALIVENESS_RESP_ACK bit from + * HICR_HOST_ALIVENESS_REQ register value + * + * Return: SICR_HOST_ALIVENESS_REQ_REQUESTED bit value + */ +static u32 mei_txe_aliveness_req_get(struct mei_device *dev) +{ + struct mei_txe_hw *hw = to_txe_hw(dev); + u32 reg; + + reg = mei_txe_br_reg_read(hw, SICR_HOST_ALIVENESS_REQ_REG); + return reg & SICR_HOST_ALIVENESS_REQ_REQUESTED; +} + +/** + * mei_txe_aliveness_get - get aliveness response register value + * + * @dev: the device structure + * + * Return: HICR_HOST_ALIVENESS_RESP_ACK bit from HICR_HOST_ALIVENESS_RESP + * register + */ +static u32 mei_txe_aliveness_get(struct mei_device *dev) +{ + struct mei_txe_hw *hw = to_txe_hw(dev); + u32 reg; + + reg = mei_txe_br_reg_read(hw, HICR_HOST_ALIVENESS_RESP_REG); + return reg & HICR_HOST_ALIVENESS_RESP_ACK; +} + +/** + * mei_txe_aliveness_poll - waits for aliveness to settle + * + * @dev: the device structure + * @expected: expected aliveness value + * + * Polls for HICR_HOST_ALIVENESS_RESP.ALIVENESS_RESP to be set + * + * Return: 0 if the expected value was received, -ETIME otherwise + */ +static int mei_txe_aliveness_poll(struct mei_device *dev, u32 expected) +{ + struct mei_txe_hw *hw = to_txe_hw(dev); + ktime_t stop, start; + + start = ktime_get(); + stop = ktime_add(start, ms_to_ktime(SEC_ALIVENESS_WAIT_TIMEOUT)); + do { + hw->aliveness = mei_txe_aliveness_get(dev); + if (hw->aliveness == expected) { + dev->pg_event = MEI_PG_EVENT_IDLE; + dev_dbg(dev->dev, "aliveness settled after %lld usecs\n", + ktime_to_us(ktime_sub(ktime_get(), start))); + return 0; + } + usleep_range(20, 50); + } while (ktime_before(ktime_get(), stop)); + + dev->pg_event = MEI_PG_EVENT_IDLE; + dev_err(dev->dev, "aliveness timed out\n"); + return -ETIME; +} + +/** + * mei_txe_aliveness_wait - waits for aliveness to settle + * + * @dev: the device structure + * @expected: expected aliveness value + * + * Waits for HICR_HOST_ALIVENESS_RESP.ALIVENESS_RESP to be set + * + * Return: 0 on success and < 0 otherwise + */ +static int mei_txe_aliveness_wait(struct mei_device *dev, u32 expected) +{ + struct mei_txe_hw *hw = to_txe_hw(dev); + const unsigned long timeout = + msecs_to_jiffies(SEC_ALIVENESS_WAIT_TIMEOUT); + long err; + int ret; + + hw->aliveness = mei_txe_aliveness_get(dev); + if (hw->aliveness == expected) + return 0; + + mutex_unlock(&dev->device_lock); + err = wait_event_timeout(hw->wait_aliveness_resp, + dev->pg_event == MEI_PG_EVENT_RECEIVED, timeout); + mutex_lock(&dev->device_lock); + + hw->aliveness = mei_txe_aliveness_get(dev); + ret = hw->aliveness == expected ? 0 : -ETIME; + + if (ret) + dev_warn(dev->dev, "aliveness timed out = %ld aliveness = %d event = %d\n", + err, hw->aliveness, dev->pg_event); + else + dev_dbg(dev->dev, "aliveness settled after = %d msec aliveness = %d event = %d\n", + jiffies_to_msecs(timeout - err), + hw->aliveness, dev->pg_event); + + dev->pg_event = MEI_PG_EVENT_IDLE; + return ret; +} + +/** + * mei_txe_aliveness_set_sync - sets an wait for aliveness to complete + * + * @dev: the device structure + * @req: requested aliveness value + * + * Return: 0 on success and < 0 otherwise + */ +int mei_txe_aliveness_set_sync(struct mei_device *dev, u32 req) +{ + if (mei_txe_aliveness_set(dev, req)) + return mei_txe_aliveness_wait(dev, req); + return 0; +} + +/** + * mei_txe_pg_in_transition - is device now in pg transition + * + * @dev: the device structure + * + * Return: true if in pg transition, false otherwise + */ +static bool mei_txe_pg_in_transition(struct mei_device *dev) +{ + return dev->pg_event == MEI_PG_EVENT_WAIT; +} + +/** + * mei_txe_pg_is_enabled - detect if PG is supported by HW + * + * @dev: the device structure + * + * Return: true is pg supported, false otherwise + */ +static bool mei_txe_pg_is_enabled(struct mei_device *dev) +{ + return true; +} + +/** + * mei_txe_pg_state - translate aliveness register value + * to the mei power gating state + * + * @dev: the device structure + * + * Return: MEI_PG_OFF if aliveness is on and MEI_PG_ON otherwise + */ +static inline enum mei_pg_state mei_txe_pg_state(struct mei_device *dev) +{ + struct mei_txe_hw *hw = to_txe_hw(dev); + + return hw->aliveness ? MEI_PG_OFF : MEI_PG_ON; +} + +/** + * mei_txe_input_ready_interrupt_enable - sets the Input Ready Interrupt + * + * @dev: the device structure + */ +static void mei_txe_input_ready_interrupt_enable(struct mei_device *dev) +{ + struct mei_txe_hw *hw = to_txe_hw(dev); + u32 hintmsk; + /* Enable the SEC_IPC_HOST_INT_MASK_IN_RDY interrupt */ + hintmsk = mei_txe_sec_reg_read(hw, SEC_IPC_HOST_INT_MASK_REG); + hintmsk |= SEC_IPC_HOST_INT_MASK_IN_RDY; + mei_txe_sec_reg_write(hw, SEC_IPC_HOST_INT_MASK_REG, hintmsk); +} + +/** + * mei_txe_input_doorbell_set - sets bit 0 in + * SEC_IPC_INPUT_DOORBELL.IPC_INPUT_DOORBELL. + * + * @hw: the txe hardware structure + */ +static void mei_txe_input_doorbell_set(struct mei_txe_hw *hw) +{ + /* Clear the interrupt cause */ + clear_bit(TXE_INTR_IN_READY_BIT, &hw->intr_cause); + mei_txe_sec_reg_write(hw, SEC_IPC_INPUT_DOORBELL_REG, 1); +} + +/** + * mei_txe_output_ready_set - Sets the SICR_SEC_IPC_OUTPUT_STATUS bit to 1 + * + * @hw: the txe hardware structure + */ +static void mei_txe_output_ready_set(struct mei_txe_hw *hw) +{ + mei_txe_br_reg_write(hw, + SICR_SEC_IPC_OUTPUT_STATUS_REG, + SEC_IPC_OUTPUT_STATUS_RDY); +} + +/** + * mei_txe_is_input_ready - check if TXE is ready for receiving data + * + * @dev: the device structure + * + * Return: true if INPUT STATUS READY bit is set + */ +static bool mei_txe_is_input_ready(struct mei_device *dev) +{ + struct mei_txe_hw *hw = to_txe_hw(dev); + u32 status; + + status = mei_txe_sec_reg_read(hw, SEC_IPC_INPUT_STATUS_REG); + return !!(SEC_IPC_INPUT_STATUS_RDY & status); +} + +/** + * mei_txe_intr_clear - clear all interrupts + * + * @dev: the device structure + */ +static inline void mei_txe_intr_clear(struct mei_device *dev) +{ + struct mei_txe_hw *hw = to_txe_hw(dev); + + mei_txe_sec_reg_write_silent(hw, SEC_IPC_HOST_INT_STATUS_REG, + SEC_IPC_HOST_INT_STATUS_PENDING); + mei_txe_br_reg_write(hw, HISR_REG, HISR_INT_STS_MSK); + mei_txe_br_reg_write(hw, HHISR_REG, IPC_HHIER_MSK); +} + +/** + * mei_txe_intr_disable - disable all interrupts + * + * @dev: the device structure + */ +static void mei_txe_intr_disable(struct mei_device *dev) +{ + struct mei_txe_hw *hw = to_txe_hw(dev); + + mei_txe_br_reg_write(hw, HHIER_REG, 0); + mei_txe_br_reg_write(hw, HIER_REG, 0); +} +/** + * mei_txe_intr_enable - enable all interrupts + * + * @dev: the device structure + */ +static void mei_txe_intr_enable(struct mei_device *dev) +{ + struct mei_txe_hw *hw = to_txe_hw(dev); + + mei_txe_br_reg_write(hw, HHIER_REG, IPC_HHIER_MSK); + mei_txe_br_reg_write(hw, HIER_REG, HIER_INT_EN_MSK); +} + +/** + * mei_txe_synchronize_irq - wait for pending IRQ handlers + * + * @dev: the device structure + */ +static void mei_txe_synchronize_irq(struct mei_device *dev) +{ + struct pci_dev *pdev = to_pci_dev(dev->dev); + + synchronize_irq(pdev->irq); +} + +/** + * mei_txe_pending_interrupts - check if there are pending interrupts + * only Aliveness, Input ready, and output doorbell are of relevance + * + * @dev: the device structure + * + * Checks if there are pending interrupts + * only Aliveness, Readiness, Input ready, and Output doorbell are relevant + * + * Return: true if there are pending interrupts + */ +static bool mei_txe_pending_interrupts(struct mei_device *dev) +{ + + struct mei_txe_hw *hw = to_txe_hw(dev); + bool ret = (hw->intr_cause & (TXE_INTR_READINESS | + TXE_INTR_ALIVENESS | + TXE_INTR_IN_READY | + TXE_INTR_OUT_DB)); + + if (ret) { + dev_dbg(dev->dev, + "Pending Interrupts InReady=%01d Readiness=%01d, Aliveness=%01d, OutDoor=%01d\n", + !!(hw->intr_cause & TXE_INTR_IN_READY), + !!(hw->intr_cause & TXE_INTR_READINESS), + !!(hw->intr_cause & TXE_INTR_ALIVENESS), + !!(hw->intr_cause & TXE_INTR_OUT_DB)); + } + return ret; +} + +/** + * mei_txe_input_payload_write - write a dword to the host buffer + * at offset idx + * + * @dev: the device structure + * @idx: index in the host buffer + * @value: value + */ +static void mei_txe_input_payload_write(struct mei_device *dev, + unsigned long idx, u32 value) +{ + struct mei_txe_hw *hw = to_txe_hw(dev); + + mei_txe_sec_reg_write(hw, SEC_IPC_INPUT_PAYLOAD_REG + + (idx * sizeof(u32)), value); +} + +/** + * mei_txe_out_data_read - read dword from the device buffer + * at offset idx + * + * @dev: the device structure + * @idx: index in the device buffer + * + * Return: register value at index + */ +static u32 mei_txe_out_data_read(const struct mei_device *dev, + unsigned long idx) +{ + struct mei_txe_hw *hw = to_txe_hw(dev); + + return mei_txe_br_reg_read(hw, + BRIDGE_IPC_OUTPUT_PAYLOAD_REG + (idx * sizeof(u32))); +} + +/* Readiness */ + +/** + * mei_txe_readiness_set_host_rdy - set host readiness bit + * + * @dev: the device structure + */ +static void mei_txe_readiness_set_host_rdy(struct mei_device *dev) +{ + struct mei_txe_hw *hw = to_txe_hw(dev); + + mei_txe_br_reg_write(hw, + SICR_HOST_IPC_READINESS_REQ_REG, + SICR_HOST_IPC_READINESS_HOST_RDY); +} + +/** + * mei_txe_readiness_clear - clear host readiness bit + * + * @dev: the device structure + */ +static void mei_txe_readiness_clear(struct mei_device *dev) +{ + struct mei_txe_hw *hw = to_txe_hw(dev); + + mei_txe_br_reg_write(hw, SICR_HOST_IPC_READINESS_REQ_REG, + SICR_HOST_IPC_READINESS_RDY_CLR); +} +/** + * mei_txe_readiness_get - Reads and returns + * the HICR_SEC_IPC_READINESS register value + * + * @dev: the device structure + * + * Return: the HICR_SEC_IPC_READINESS register value + */ +static u32 mei_txe_readiness_get(struct mei_device *dev) +{ + struct mei_txe_hw *hw = to_txe_hw(dev); + + return mei_txe_br_reg_read(hw, HICR_SEC_IPC_READINESS_REG); +} + + +/** + * mei_txe_readiness_is_sec_rdy - check readiness + * for HICR_SEC_IPC_READINESS_SEC_RDY + * + * @readiness: cached readiness state + * + * Return: true if readiness bit is set + */ +static inline bool mei_txe_readiness_is_sec_rdy(u32 readiness) +{ + return !!(readiness & HICR_SEC_IPC_READINESS_SEC_RDY); +} + +/** + * mei_txe_hw_is_ready - check if the hw is ready + * + * @dev: the device structure + * + * Return: true if sec is ready + */ +static bool mei_txe_hw_is_ready(struct mei_device *dev) +{ + u32 readiness = mei_txe_readiness_get(dev); + + return mei_txe_readiness_is_sec_rdy(readiness); +} + +/** + * mei_txe_host_is_ready - check if the host is ready + * + * @dev: the device structure + * + * Return: true if host is ready + */ +static inline bool mei_txe_host_is_ready(struct mei_device *dev) +{ + struct mei_txe_hw *hw = to_txe_hw(dev); + u32 reg = mei_txe_br_reg_read(hw, HICR_SEC_IPC_READINESS_REG); + + return !!(reg & HICR_SEC_IPC_READINESS_HOST_RDY); +} + +/** + * mei_txe_readiness_wait - wait till readiness settles + * + * @dev: the device structure + * + * Return: 0 on success and -ETIME on timeout + */ +static int mei_txe_readiness_wait(struct mei_device *dev) +{ + if (mei_txe_hw_is_ready(dev)) + return 0; + + mutex_unlock(&dev->device_lock); + wait_event_timeout(dev->wait_hw_ready, dev->recvd_hw_ready, + msecs_to_jiffies(SEC_RESET_WAIT_TIMEOUT)); + mutex_lock(&dev->device_lock); + if (!dev->recvd_hw_ready) { + dev_err(dev->dev, "wait for readiness failed\n"); + return -ETIME; + } + + dev->recvd_hw_ready = false; + return 0; +} + +static const struct mei_fw_status mei_txe_fw_sts = { + .count = 2, + .status[0] = PCI_CFG_TXE_FW_STS0, + .status[1] = PCI_CFG_TXE_FW_STS1 +}; + +/** + * mei_txe_fw_status - read fw status register from pci config space + * + * @dev: mei device + * @fw_status: fw status register values + * + * Return: 0 on success, error otherwise + */ +static int mei_txe_fw_status(struct mei_device *dev, + struct mei_fw_status *fw_status) +{ + const struct mei_fw_status *fw_src = &mei_txe_fw_sts; + struct pci_dev *pdev = to_pci_dev(dev->dev); + int ret; + int i; + + if (!fw_status) + return -EINVAL; + + fw_status->count = fw_src->count; + for (i = 0; i < fw_src->count && i < MEI_FW_STATUS_MAX; i++) { + ret = pci_read_config_dword(pdev, fw_src->status[i], + &fw_status->status[i]); + trace_mei_pci_cfg_read(dev->dev, "PCI_CFG_HSF_X", + fw_src->status[i], + fw_status->status[i]); + if (ret) + return ret; + } + + return 0; +} + +/** + * mei_txe_hw_config - configure hardware at the start of the devices + * + * @dev: the device structure + * + * Configure hardware at the start of the device should be done only + * once at the device probe time + * + * Return: always 0 + */ +static int mei_txe_hw_config(struct mei_device *dev) +{ + + struct mei_txe_hw *hw = to_txe_hw(dev); + + hw->aliveness = mei_txe_aliveness_get(dev); + hw->readiness = mei_txe_readiness_get(dev); + + dev_dbg(dev->dev, "aliveness_resp = 0x%08x, readiness = 0x%08x.\n", + hw->aliveness, hw->readiness); + + return 0; +} + +/** + * mei_txe_write - writes a message to device. + * + * @dev: the device structure + * @hdr: header of message + * @hdr_len: header length in bytes - must multiplication of a slot (4bytes) + * @data: payload + * @data_len: paylead length in bytes + * + * Return: 0 if success, < 0 - otherwise. + */ +static int mei_txe_write(struct mei_device *dev, + const void *hdr, size_t hdr_len, + const void *data, size_t data_len) +{ + struct mei_txe_hw *hw = to_txe_hw(dev); + unsigned long rem; + const u32 *reg_buf; + u32 slots = TXE_HBUF_DEPTH; + u32 dw_cnt; + unsigned long i, j; + + if (WARN_ON(!hdr || !data || hdr_len & 0x3)) + return -EINVAL; + + dev_dbg(dev->dev, MEI_HDR_FMT, MEI_HDR_PRM((struct mei_msg_hdr *)hdr)); + + dw_cnt = mei_data2slots(hdr_len + data_len); + if (dw_cnt > slots) + return -EMSGSIZE; + + if (WARN(!hw->aliveness, "txe write: aliveness not asserted\n")) + return -EAGAIN; + + /* Enable Input Ready Interrupt. */ + mei_txe_input_ready_interrupt_enable(dev); + + if (!mei_txe_is_input_ready(dev)) { + char fw_sts_str[MEI_FW_STATUS_STR_SZ]; + + mei_fw_status_str(dev, fw_sts_str, MEI_FW_STATUS_STR_SZ); + dev_err(dev->dev, "Input is not ready %s\n", fw_sts_str); + return -EAGAIN; + } + + reg_buf = hdr; + for (i = 0; i < hdr_len / MEI_SLOT_SIZE; i++) + mei_txe_input_payload_write(dev, i, reg_buf[i]); + + reg_buf = data; + for (j = 0; j < data_len / MEI_SLOT_SIZE; j++) + mei_txe_input_payload_write(dev, i + j, reg_buf[j]); + + rem = data_len & 0x3; + if (rem > 0) { + u32 reg = 0; + + memcpy(®, (const u8 *)data + data_len - rem, rem); + mei_txe_input_payload_write(dev, i + j, reg); + } + + /* after each write the whole buffer is consumed */ + hw->slots = 0; + + /* Set Input-Doorbell */ + mei_txe_input_doorbell_set(hw); + + return 0; +} + +/** + * mei_txe_hbuf_depth - mimics the me hbuf circular buffer + * + * @dev: the device structure + * + * Return: the TXE_HBUF_DEPTH + */ +static u32 mei_txe_hbuf_depth(const struct mei_device *dev) +{ + return TXE_HBUF_DEPTH; +} + +/** + * mei_txe_hbuf_empty_slots - mimics the me hbuf circular buffer + * + * @dev: the device structure + * + * Return: always TXE_HBUF_DEPTH + */ +static int mei_txe_hbuf_empty_slots(struct mei_device *dev) +{ + struct mei_txe_hw *hw = to_txe_hw(dev); + + return hw->slots; +} + +/** + * mei_txe_count_full_read_slots - mimics the me device circular buffer + * + * @dev: the device structure + * + * Return: always buffer size in dwords count + */ +static int mei_txe_count_full_read_slots(struct mei_device *dev) +{ + /* read buffers has static size */ + return TXE_HBUF_DEPTH; +} + +/** + * mei_txe_read_hdr - read message header which is always in 4 first bytes + * + * @dev: the device structure + * + * Return: mei message header + */ + +static u32 mei_txe_read_hdr(const struct mei_device *dev) +{ + return mei_txe_out_data_read(dev, 0); +} +/** + * mei_txe_read - reads a message from the txe device. + * + * @dev: the device structure + * @buf: message buffer will be written + * @len: message size will be read + * + * Return: -EINVAL on error wrong argument and 0 on success + */ +static int mei_txe_read(struct mei_device *dev, + unsigned char *buf, unsigned long len) +{ + + struct mei_txe_hw *hw = to_txe_hw(dev); + u32 *reg_buf, reg; + u32 rem; + u32 i; + + if (WARN_ON(!buf || !len)) + return -EINVAL; + + reg_buf = (u32 *)buf; + rem = len & 0x3; + + dev_dbg(dev->dev, "buffer-length = %lu buf[0]0x%08X\n", + len, mei_txe_out_data_read(dev, 0)); + + for (i = 0; i < len / MEI_SLOT_SIZE; i++) { + /* skip header: index starts from 1 */ + reg = mei_txe_out_data_read(dev, i + 1); + dev_dbg(dev->dev, "buf[%d] = 0x%08X\n", i, reg); + *reg_buf++ = reg; + } + + if (rem) { + reg = mei_txe_out_data_read(dev, i + 1); + memcpy(reg_buf, ®, rem); + } + + mei_txe_output_ready_set(hw); + return 0; +} + +/** + * mei_txe_hw_reset - resets host and fw. + * + * @dev: the device structure + * @intr_enable: if interrupt should be enabled after reset. + * + * Return: 0 on success and < 0 in case of error + */ +static int mei_txe_hw_reset(struct mei_device *dev, bool intr_enable) +{ + struct mei_txe_hw *hw = to_txe_hw(dev); + + u32 aliveness_req; + /* + * read input doorbell to ensure consistency between Bridge and SeC + * return value might be garbage return + */ + (void)mei_txe_sec_reg_read_silent(hw, SEC_IPC_INPUT_DOORBELL_REG); + + aliveness_req = mei_txe_aliveness_req_get(dev); + hw->aliveness = mei_txe_aliveness_get(dev); + + /* Disable interrupts in this stage we will poll */ + mei_txe_intr_disable(dev); + + /* + * If Aliveness Request and Aliveness Response are not equal then + * wait for them to be equal + * Since we might have interrupts disabled - poll for it + */ + if (aliveness_req != hw->aliveness) + if (mei_txe_aliveness_poll(dev, aliveness_req) < 0) { + dev_err(dev->dev, "wait for aliveness settle failed ... bailing out\n"); + return -EIO; + } + + /* + * If Aliveness Request and Aliveness Response are set then clear them + */ + if (aliveness_req) { + mei_txe_aliveness_set(dev, 0); + if (mei_txe_aliveness_poll(dev, 0) < 0) { + dev_err(dev->dev, "wait for aliveness failed ... bailing out\n"); + return -EIO; + } + } + + /* + * Set readiness RDY_CLR bit + */ + mei_txe_readiness_clear(dev); + + return 0; +} + +/** + * mei_txe_hw_start - start the hardware after reset + * + * @dev: the device structure + * + * Return: 0 on success an error code otherwise + */ +static int mei_txe_hw_start(struct mei_device *dev) +{ + struct mei_txe_hw *hw = to_txe_hw(dev); + int ret; + + u32 hisr; + + /* bring back interrupts */ + mei_txe_intr_enable(dev); + + ret = mei_txe_readiness_wait(dev); + if (ret < 0) { + dev_err(dev->dev, "waiting for readiness failed\n"); + return ret; + } + + /* + * If HISR.INT2_STS interrupt status bit is set then clear it. + */ + hisr = mei_txe_br_reg_read(hw, HISR_REG); + if (hisr & HISR_INT_2_STS) + mei_txe_br_reg_write(hw, HISR_REG, HISR_INT_2_STS); + + /* Clear the interrupt cause of OutputDoorbell */ + clear_bit(TXE_INTR_OUT_DB_BIT, &hw->intr_cause); + + ret = mei_txe_aliveness_set_sync(dev, 1); + if (ret < 0) { + dev_err(dev->dev, "wait for aliveness failed ... bailing out\n"); + return ret; + } + + pm_runtime_set_active(dev->dev); + + /* enable input ready interrupts: + * SEC_IPC_HOST_INT_MASK.IPC_INPUT_READY_INT_MASK + */ + mei_txe_input_ready_interrupt_enable(dev); + + + /* Set the SICR_SEC_IPC_OUTPUT_STATUS.IPC_OUTPUT_READY bit */ + mei_txe_output_ready_set(hw); + + /* Set bit SICR_HOST_IPC_READINESS.HOST_RDY + */ + mei_txe_readiness_set_host_rdy(dev); + + return 0; +} + +/** + * mei_txe_check_and_ack_intrs - translate multi BAR interrupt into + * single bit mask and acknowledge the interrupts + * + * @dev: the device structure + * @do_ack: acknowledge interrupts + * + * Return: true if found interrupts to process. + */ +static bool mei_txe_check_and_ack_intrs(struct mei_device *dev, bool do_ack) +{ + struct mei_txe_hw *hw = to_txe_hw(dev); + u32 hisr; + u32 hhisr; + u32 ipc_isr; + u32 aliveness; + bool generated; + + /* read interrupt registers */ + hhisr = mei_txe_br_reg_read(hw, HHISR_REG); + generated = (hhisr & IPC_HHIER_MSK); + if (!generated) + goto out; + + hisr = mei_txe_br_reg_read(hw, HISR_REG); + + aliveness = mei_txe_aliveness_get(dev); + if (hhisr & IPC_HHIER_SEC && aliveness) { + ipc_isr = mei_txe_sec_reg_read_silent(hw, + SEC_IPC_HOST_INT_STATUS_REG); + } else { + ipc_isr = 0; + hhisr &= ~IPC_HHIER_SEC; + } + + if (do_ack) { + /* Save the interrupt causes */ + hw->intr_cause |= hisr & HISR_INT_STS_MSK; + if (ipc_isr & SEC_IPC_HOST_INT_STATUS_IN_RDY) + hw->intr_cause |= TXE_INTR_IN_READY; + + + mei_txe_intr_disable(dev); + /* Clear the interrupts in hierarchy: + * IPC and Bridge, than the High Level */ + mei_txe_sec_reg_write_silent(hw, + SEC_IPC_HOST_INT_STATUS_REG, ipc_isr); + mei_txe_br_reg_write(hw, HISR_REG, hisr); + mei_txe_br_reg_write(hw, HHISR_REG, hhisr); + } + +out: + return generated; +} + +/** + * mei_txe_irq_quick_handler - The ISR of the MEI device + * + * @irq: The irq number + * @dev_id: pointer to the device structure + * + * Return: IRQ_WAKE_THREAD if interrupt is designed for the device + * IRQ_NONE otherwise + */ +irqreturn_t mei_txe_irq_quick_handler(int irq, void *dev_id) +{ + struct mei_device *dev = dev_id; + + if (mei_txe_check_and_ack_intrs(dev, true)) + return IRQ_WAKE_THREAD; + return IRQ_NONE; +} + + +/** + * mei_txe_irq_thread_handler - txe interrupt thread + * + * @irq: The irq number + * @dev_id: pointer to the device structure + * + * Return: IRQ_HANDLED + */ +irqreturn_t mei_txe_irq_thread_handler(int irq, void *dev_id) +{ + struct mei_device *dev = (struct mei_device *) dev_id; + struct mei_txe_hw *hw = to_txe_hw(dev); + struct list_head cmpl_list; + s32 slots; + int rets = 0; + + dev_dbg(dev->dev, "irq thread: Interrupt Registers HHISR|HISR|SEC=%02X|%04X|%02X\n", + mei_txe_br_reg_read(hw, HHISR_REG), + mei_txe_br_reg_read(hw, HISR_REG), + mei_txe_sec_reg_read_silent(hw, SEC_IPC_HOST_INT_STATUS_REG)); + + + /* initialize our complete list */ + mutex_lock(&dev->device_lock); + INIT_LIST_HEAD(&cmpl_list); + + if (pci_dev_msi_enabled(to_pci_dev(dev->dev))) + mei_txe_check_and_ack_intrs(dev, true); + + /* show irq events */ + mei_txe_pending_interrupts(dev); + + hw->aliveness = mei_txe_aliveness_get(dev); + hw->readiness = mei_txe_readiness_get(dev); + + /* Readiness: + * Detection of TXE driver going through reset + * or TXE driver resetting the HECI interface. + */ + if (test_and_clear_bit(TXE_INTR_READINESS_BIT, &hw->intr_cause)) { + dev_dbg(dev->dev, "Readiness Interrupt was received...\n"); + + /* Check if SeC is going through reset */ + if (mei_txe_readiness_is_sec_rdy(hw->readiness)) { + dev_dbg(dev->dev, "we need to start the dev.\n"); + dev->recvd_hw_ready = true; + } else { + dev->recvd_hw_ready = false; + if (dev->dev_state != MEI_DEV_RESETTING) { + + dev_warn(dev->dev, "FW not ready: resetting.\n"); + schedule_work(&dev->reset_work); + goto end; + + } + } + wake_up(&dev->wait_hw_ready); + } + + /************************************************************/ + /* Check interrupt cause: + * Aliveness: Detection of SeC acknowledge of host request that + * it remain alive or host cancellation of that request. + */ + + if (test_and_clear_bit(TXE_INTR_ALIVENESS_BIT, &hw->intr_cause)) { + /* Clear the interrupt cause */ + dev_dbg(dev->dev, + "Aliveness Interrupt: Status: %d\n", hw->aliveness); + dev->pg_event = MEI_PG_EVENT_RECEIVED; + if (waitqueue_active(&hw->wait_aliveness_resp)) + wake_up(&hw->wait_aliveness_resp); + } + + + /* Output Doorbell: + * Detection of SeC having sent output to host + */ + slots = mei_count_full_read_slots(dev); + if (test_and_clear_bit(TXE_INTR_OUT_DB_BIT, &hw->intr_cause)) { + /* Read from TXE */ + rets = mei_irq_read_handler(dev, &cmpl_list, &slots); + if (rets && + (dev->dev_state != MEI_DEV_RESETTING && + dev->dev_state != MEI_DEV_POWER_DOWN)) { + dev_err(dev->dev, + "mei_irq_read_handler ret = %d.\n", rets); + + schedule_work(&dev->reset_work); + goto end; + } + } + /* Input Ready: Detection if host can write to SeC */ + if (test_and_clear_bit(TXE_INTR_IN_READY_BIT, &hw->intr_cause)) { + dev->hbuf_is_ready = true; + hw->slots = TXE_HBUF_DEPTH; + } + + if (hw->aliveness && dev->hbuf_is_ready) { + /* get the real register value */ + dev->hbuf_is_ready = mei_hbuf_is_ready(dev); + rets = mei_irq_write_handler(dev, &cmpl_list); + if (rets && rets != -EMSGSIZE) + dev_err(dev->dev, "mei_irq_write_handler ret = %d.\n", + rets); + dev->hbuf_is_ready = mei_hbuf_is_ready(dev); + } + + mei_irq_compl_handler(dev, &cmpl_list); + +end: + dev_dbg(dev->dev, "interrupt thread end ret = %d\n", rets); + + mutex_unlock(&dev->device_lock); + + mei_enable_interrupts(dev); + return IRQ_HANDLED; +} + +static const struct mei_hw_ops mei_txe_hw_ops = { + + .host_is_ready = mei_txe_host_is_ready, + + .fw_status = mei_txe_fw_status, + .pg_state = mei_txe_pg_state, + + .hw_is_ready = mei_txe_hw_is_ready, + .hw_reset = mei_txe_hw_reset, + .hw_config = mei_txe_hw_config, + .hw_start = mei_txe_hw_start, + + .pg_in_transition = mei_txe_pg_in_transition, + .pg_is_enabled = mei_txe_pg_is_enabled, + + .intr_clear = mei_txe_intr_clear, + .intr_enable = mei_txe_intr_enable, + .intr_disable = mei_txe_intr_disable, + .synchronize_irq = mei_txe_synchronize_irq, + + .hbuf_free_slots = mei_txe_hbuf_empty_slots, + .hbuf_is_ready = mei_txe_is_input_ready, + .hbuf_depth = mei_txe_hbuf_depth, + + .write = mei_txe_write, + + .rdbuf_full_slots = mei_txe_count_full_read_slots, + .read_hdr = mei_txe_read_hdr, + + .read = mei_txe_read, + +}; + +/** + * mei_txe_dev_init - allocates and initializes txe hardware specific structure + * + * @pdev: pci device + * + * Return: struct mei_device * on success or NULL + */ +struct mei_device *mei_txe_dev_init(struct pci_dev *pdev) +{ + struct mei_device *dev; + struct mei_txe_hw *hw; + + dev = devm_kzalloc(&pdev->dev, sizeof(*dev) + sizeof(*hw), GFP_KERNEL); + if (!dev) + return NULL; + + mei_device_init(dev, &pdev->dev, false, &mei_txe_hw_ops); + + hw = to_txe_hw(dev); + + init_waitqueue_head(&hw->wait_aliveness_resp); + + return dev; +} + +/** + * mei_txe_setup_satt2 - SATT2 configuration for DMA support. + * + * @dev: the device structure + * @addr: physical address start of the range + * @range: physical range size + * + * Return: 0 on success an error code otherwise + */ +int mei_txe_setup_satt2(struct mei_device *dev, phys_addr_t addr, u32 range) +{ + struct mei_txe_hw *hw = to_txe_hw(dev); + + u32 lo32 = lower_32_bits(addr); + u32 hi32 = upper_32_bits(addr); + u32 ctrl; + + /* SATT is limited to 36 Bits */ + if (hi32 & ~0xF) + return -EINVAL; + + /* SATT has to be 16Byte aligned */ + if (lo32 & 0xF) + return -EINVAL; + + /* SATT range has to be 4Bytes aligned */ + if (range & 0x4) + return -EINVAL; + + /* SATT is limited to 32 MB range*/ + if (range > SATT_RANGE_MAX) + return -EINVAL; + + ctrl = SATT2_CTRL_VALID_MSK; + ctrl |= hi32 << SATT2_CTRL_BR_BASE_ADDR_REG_SHIFT; + + mei_txe_br_reg_write(hw, SATT2_SAP_SIZE_REG, range); + mei_txe_br_reg_write(hw, SATT2_BRG_BA_LSB_REG, lo32); + mei_txe_br_reg_write(hw, SATT2_CTRL_REG, ctrl); + dev_dbg(dev->dev, "SATT2: SAP_SIZE_OFFSET=0x%08X, BRG_BA_LSB_OFFSET=0x%08X, CTRL_OFFSET=0x%08X\n", + range, lo32, ctrl); + + return 0; +} diff --git a/drivers/misc/mei/hw-txe.h b/drivers/misc/mei/hw-txe.h new file mode 100644 index 0000000000..96511b04bf --- /dev/null +++ b/drivers/misc/mei/hw-txe.h @@ -0,0 +1,65 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (c) 2013-2016, Intel Corporation. All rights reserved. + * Intel Management Engine Interface (Intel MEI) Linux driver + */ + +#ifndef _MEI_HW_TXE_H_ +#define _MEI_HW_TXE_H_ + +#include <linux/irqreturn.h> + +#include "hw.h" +#include "hw-txe-regs.h" + +#define MEI_TXI_RPM_TIMEOUT 500 /* ms */ + +/* Flatten Hierarchy interrupt cause */ +#define TXE_INTR_READINESS_BIT 0 /* HISR_INT_0_STS */ +#define TXE_INTR_READINESS HISR_INT_0_STS +#define TXE_INTR_ALIVENESS_BIT 1 /* HISR_INT_1_STS */ +#define TXE_INTR_ALIVENESS HISR_INT_1_STS +#define TXE_INTR_OUT_DB_BIT 2 /* HISR_INT_2_STS */ +#define TXE_INTR_OUT_DB HISR_INT_2_STS +#define TXE_INTR_IN_READY_BIT 8 /* beyond HISR */ +#define TXE_INTR_IN_READY BIT(8) + +/** + * struct mei_txe_hw - txe hardware specifics + * + * @mem_addr: SeC and BRIDGE bars + * @aliveness: aliveness (power gating) state of the hardware + * @readiness: readiness state of the hardware + * @slots: number of empty slots + * @wait_aliveness_resp: aliveness wait queue + * @intr_cause: translated interrupt cause + */ +struct mei_txe_hw { + void __iomem * const *mem_addr; + u32 aliveness; + u32 readiness; + u32 slots; + + wait_queue_head_t wait_aliveness_resp; + + unsigned long intr_cause; +}; + +#define to_txe_hw(dev) (struct mei_txe_hw *)((dev)->hw) + +static inline struct mei_device *hw_txe_to_mei(struct mei_txe_hw *hw) +{ + return container_of((void *)hw, struct mei_device, hw); +} + +struct mei_device *mei_txe_dev_init(struct pci_dev *pdev); + +irqreturn_t mei_txe_irq_quick_handler(int irq, void *dev_id); +irqreturn_t mei_txe_irq_thread_handler(int irq, void *dev_id); + +int mei_txe_aliveness_set_sync(struct mei_device *dev, u32 req); + +int mei_txe_setup_satt2(struct mei_device *dev, phys_addr_t addr, u32 range); + + +#endif /* _MEI_HW_TXE_H_ */ diff --git a/drivers/misc/mei/hw.h b/drivers/misc/mei/hw.h new file mode 100644 index 0000000000..e910302fcd --- /dev/null +++ b/drivers/misc/mei/hw.h @@ -0,0 +1,836 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (c) 2003-2022, Intel Corporation. All rights reserved + * Intel Management Engine Interface (Intel MEI) Linux driver + */ + +#ifndef _MEI_HW_TYPES_H_ +#define _MEI_HW_TYPES_H_ + +#include <linux/mei.h> + +/* + * Timeouts in Seconds + */ +#define MEI_HW_READY_TIMEOUT 2 /* Timeout on ready message */ +#define MEI_CONNECT_TIMEOUT 3 /* HPS: at least 2 seconds */ + +#define MEI_CL_CONNECT_TIMEOUT 15 /* HPS: Client Connect Timeout */ +#define MEI_CL_CONNECT_TIMEOUT_SLOW 30 /* HPS: Client Connect Timeout, slow FW */ +#define MEI_CLIENTS_INIT_TIMEOUT 15 /* HPS: Clients Enumeration Timeout */ + +#define MEI_PGI_TIMEOUT 1 /* PG Isolation time response 1 sec */ +#define MEI_D0I3_TIMEOUT 5 /* D0i3 set/unset max response time */ +#define MEI_HBM_TIMEOUT 1 /* 1 second */ +#define MEI_HBM_TIMEOUT_SLOW 5 /* 5 second, slow FW */ + +#define MKHI_RCV_TIMEOUT 500 /* receive timeout in msec */ +#define MKHI_RCV_TIMEOUT_SLOW 10000 /* receive timeout in msec, slow FW */ + +/* + * FW page size for DMA allocations + */ +#define MEI_FW_PAGE_SIZE 4096UL + +/* + * MEI Version + */ +#define HBM_MINOR_VERSION 2 +#define HBM_MAJOR_VERSION 2 + +/* + * MEI version with PGI support + */ +#define HBM_MINOR_VERSION_PGI 1 +#define HBM_MAJOR_VERSION_PGI 1 + +/* + * MEI version with Dynamic clients support + */ +#define HBM_MINOR_VERSION_DC 0 +#define HBM_MAJOR_VERSION_DC 2 + +/* + * MEI version with immediate reply to enum request support + */ +#define HBM_MINOR_VERSION_IE 0 +#define HBM_MAJOR_VERSION_IE 2 + +/* + * MEI version with disconnect on connection timeout support + */ +#define HBM_MINOR_VERSION_DOT 0 +#define HBM_MAJOR_VERSION_DOT 2 + +/* + * MEI version with notification support + */ +#define HBM_MINOR_VERSION_EV 0 +#define HBM_MAJOR_VERSION_EV 2 + +/* + * MEI version with fixed address client support + */ +#define HBM_MINOR_VERSION_FA 0 +#define HBM_MAJOR_VERSION_FA 2 + +/* + * MEI version with OS ver message support + */ +#define HBM_MINOR_VERSION_OS 0 +#define HBM_MAJOR_VERSION_OS 2 + +/* + * MEI version with dma ring support + */ +#define HBM_MINOR_VERSION_DR 1 +#define HBM_MAJOR_VERSION_DR 2 + +/* + * MEI version with vm tag support + */ +#define HBM_MINOR_VERSION_VT 2 +#define HBM_MAJOR_VERSION_VT 2 + +/* + * MEI version with GSC support + */ +#define HBM_MINOR_VERSION_GSC 2 +#define HBM_MAJOR_VERSION_GSC 2 + +/* + * MEI version with capabilities message support + */ +#define HBM_MINOR_VERSION_CAP 2 +#define HBM_MAJOR_VERSION_CAP 2 + +/* + * MEI version with client DMA support + */ +#define HBM_MINOR_VERSION_CD 2 +#define HBM_MAJOR_VERSION_CD 2 + +/* Host bus message command opcode */ +#define MEI_HBM_CMD_OP_MSK 0x7f +/* Host bus message command RESPONSE */ +#define MEI_HBM_CMD_RES_MSK 0x80 + +/* + * MEI Bus Message Command IDs + */ +#define HOST_START_REQ_CMD 0x01 +#define HOST_START_RES_CMD 0x81 + +#define HOST_STOP_REQ_CMD 0x02 +#define HOST_STOP_RES_CMD 0x82 + +#define ME_STOP_REQ_CMD 0x03 + +#define HOST_ENUM_REQ_CMD 0x04 +#define HOST_ENUM_RES_CMD 0x84 + +#define HOST_CLIENT_PROPERTIES_REQ_CMD 0x05 +#define HOST_CLIENT_PROPERTIES_RES_CMD 0x85 + +#define CLIENT_CONNECT_REQ_CMD 0x06 +#define CLIENT_CONNECT_RES_CMD 0x86 + +#define CLIENT_DISCONNECT_REQ_CMD 0x07 +#define CLIENT_DISCONNECT_RES_CMD 0x87 + +#define MEI_FLOW_CONTROL_CMD 0x08 + +#define MEI_PG_ISOLATION_ENTRY_REQ_CMD 0x0a +#define MEI_PG_ISOLATION_ENTRY_RES_CMD 0x8a +#define MEI_PG_ISOLATION_EXIT_REQ_CMD 0x0b +#define MEI_PG_ISOLATION_EXIT_RES_CMD 0x8b + +#define MEI_HBM_ADD_CLIENT_REQ_CMD 0x0f +#define MEI_HBM_ADD_CLIENT_RES_CMD 0x8f + +#define MEI_HBM_NOTIFY_REQ_CMD 0x10 +#define MEI_HBM_NOTIFY_RES_CMD 0x90 +#define MEI_HBM_NOTIFICATION_CMD 0x11 + +#define MEI_HBM_DMA_SETUP_REQ_CMD 0x12 +#define MEI_HBM_DMA_SETUP_RES_CMD 0x92 + +#define MEI_HBM_CAPABILITIES_REQ_CMD 0x13 +#define MEI_HBM_CAPABILITIES_RES_CMD 0x93 + +#define MEI_HBM_CLIENT_DMA_MAP_REQ_CMD 0x14 +#define MEI_HBM_CLIENT_DMA_MAP_RES_CMD 0x94 + +#define MEI_HBM_CLIENT_DMA_UNMAP_REQ_CMD 0x15 +#define MEI_HBM_CLIENT_DMA_UNMAP_RES_CMD 0x95 + +/* + * MEI Stop Reason + * used by hbm_host_stop_request.reason + */ +enum mei_stop_reason_types { + DRIVER_STOP_REQUEST = 0x00, + DEVICE_D1_ENTRY = 0x01, + DEVICE_D2_ENTRY = 0x02, + DEVICE_D3_ENTRY = 0x03, + SYSTEM_S1_ENTRY = 0x04, + SYSTEM_S2_ENTRY = 0x05, + SYSTEM_S3_ENTRY = 0x06, + SYSTEM_S4_ENTRY = 0x07, + SYSTEM_S5_ENTRY = 0x08 +}; + + +/** + * enum mei_hbm_status - mei host bus messages return values + * + * @MEI_HBMS_SUCCESS : status success + * @MEI_HBMS_CLIENT_NOT_FOUND : client not found + * @MEI_HBMS_ALREADY_EXISTS : connection already established + * @MEI_HBMS_REJECTED : connection is rejected + * @MEI_HBMS_INVALID_PARAMETER : invalid parameter + * @MEI_HBMS_NOT_ALLOWED : operation not allowed + * @MEI_HBMS_ALREADY_STARTED : system is already started + * @MEI_HBMS_NOT_STARTED : system not started + * + * @MEI_HBMS_MAX : sentinel + */ +enum mei_hbm_status { + MEI_HBMS_SUCCESS = 0, + MEI_HBMS_CLIENT_NOT_FOUND = 1, + MEI_HBMS_ALREADY_EXISTS = 2, + MEI_HBMS_REJECTED = 3, + MEI_HBMS_INVALID_PARAMETER = 4, + MEI_HBMS_NOT_ALLOWED = 5, + MEI_HBMS_ALREADY_STARTED = 6, + MEI_HBMS_NOT_STARTED = 7, + + MEI_HBMS_MAX +}; + + +/* + * Client Connect Status + * used by hbm_client_connect_response.status + */ +enum mei_cl_connect_status { + MEI_CL_CONN_SUCCESS = MEI_HBMS_SUCCESS, + MEI_CL_CONN_NOT_FOUND = MEI_HBMS_CLIENT_NOT_FOUND, + MEI_CL_CONN_ALREADY_STARTED = MEI_HBMS_ALREADY_EXISTS, + MEI_CL_CONN_OUT_OF_RESOURCES = MEI_HBMS_REJECTED, + MEI_CL_CONN_MESSAGE_SMALL = MEI_HBMS_INVALID_PARAMETER, + MEI_CL_CONN_NOT_ALLOWED = MEI_HBMS_NOT_ALLOWED, +}; + +/* + * Client Disconnect Status + */ +enum mei_cl_disconnect_status { + MEI_CL_DISCONN_SUCCESS = MEI_HBMS_SUCCESS +}; + +/** + * enum mei_ext_hdr_type - extended header type used in + * extended header TLV + * + * @MEI_EXT_HDR_NONE: sentinel + * @MEI_EXT_HDR_VTAG: vtag header + * @MEI_EXT_HDR_GSC: gsc header + */ +enum mei_ext_hdr_type { + MEI_EXT_HDR_NONE = 0, + MEI_EXT_HDR_VTAG = 1, + MEI_EXT_HDR_GSC = 2, +}; + +/** + * struct mei_ext_hdr - extend header descriptor (TLV) + * @type: enum mei_ext_hdr_type + * @length: length excluding descriptor + * @data: the extended header payload + */ +struct mei_ext_hdr { + u8 type; + u8 length; + u8 data[]; +} __packed; + +/** + * struct mei_ext_meta_hdr - extend header meta data + * @count: number of headers + * @size: total size of the extended header list excluding meta header + * @reserved: reserved + * @hdrs: extended headers TLV list + */ +struct mei_ext_meta_hdr { + u8 count; + u8 size; + u8 reserved[2]; + u8 hdrs[]; +} __packed; + +/** + * struct mei_ext_hdr_vtag - extend header for vtag + * + * @hdr: standard extend header + * @vtag: virtual tag + * @reserved: reserved + */ +struct mei_ext_hdr_vtag { + struct mei_ext_hdr hdr; + u8 vtag; + u8 reserved; +} __packed; + +/* + * Extended header iterator functions + */ +/** + * mei_ext_begin - extended header iterator begin + * + * @meta: meta header of the extended header list + * + * Return: The first extended header + */ +static inline struct mei_ext_hdr *mei_ext_begin(struct mei_ext_meta_hdr *meta) +{ + return (struct mei_ext_hdr *)meta->hdrs; +} + +/** + * mei_ext_last - check if the ext is the last one in the TLV list + * + * @meta: meta header of the extended header list + * @ext: a meta header on the list + * + * Return: true if ext is the last header on the list + */ +static inline bool mei_ext_last(struct mei_ext_meta_hdr *meta, + struct mei_ext_hdr *ext) +{ + return (u8 *)ext >= (u8 *)meta + sizeof(*meta) + (meta->size * 4); +} + +struct mei_gsc_sgl { + u32 low; + u32 high; + u32 length; +} __packed; + +#define GSC_HECI_MSG_KERNEL 0 +#define GSC_HECI_MSG_USER 1 + +#define GSC_ADDRESS_TYPE_GTT 0 +#define GSC_ADDRESS_TYPE_PPGTT 1 +#define GSC_ADDRESS_TYPE_PHYSICAL_CONTINUOUS 2 /* max of 64K */ +#define GSC_ADDRESS_TYPE_PHYSICAL_SGL 3 + +/** + * struct mei_ext_hdr_gsc_h2f - extended header: gsc host to firmware interface + * + * @hdr: extended header + * @client_id: GSC_HECI_MSG_KERNEL or GSC_HECI_MSG_USER + * @addr_type: GSC_ADDRESS_TYPE_{GTT, PPGTT, PHYSICAL_CONTINUOUS, PHYSICAL_SGL} + * @fence_id: synchronization marker + * @input_address_count: number of input sgl buffers + * @output_address_count: number of output sgl buffers + * @reserved: reserved + * @sgl: sg list + */ +struct mei_ext_hdr_gsc_h2f { + struct mei_ext_hdr hdr; + u8 client_id; + u8 addr_type; + u32 fence_id; + u8 input_address_count; + u8 output_address_count; + u8 reserved[2]; + struct mei_gsc_sgl sgl[]; +} __packed; + +/** + * struct mei_ext_hdr_gsc_f2h - gsc firmware to host interface + * + * @hdr: extended header + * @client_id: GSC_HECI_MSG_KERNEL or GSC_HECI_MSG_USER + * @reserved: reserved + * @fence_id: synchronization marker + * @written: number of bytes written to firmware + */ +struct mei_ext_hdr_gsc_f2h { + struct mei_ext_hdr hdr; + u8 client_id; + u8 reserved; + u32 fence_id; + u32 written; +} __packed; + +/** + * mei_ext_next - following extended header on the TLV list + * + * @ext: current extend header + * + * Context: The function does not check for the overflows, + * one should call mei_ext_last before. + * + * Return: The following extend header after @ext + */ +static inline struct mei_ext_hdr *mei_ext_next(struct mei_ext_hdr *ext) +{ + return (struct mei_ext_hdr *)((u8 *)ext + (ext->length * 4)); +} + +/** + * mei_ext_hdr_len - get ext header length in bytes + * + * @ext: extend header + * + * Return: extend header length in bytes + */ +static inline u32 mei_ext_hdr_len(const struct mei_ext_hdr *ext) +{ + if (!ext) + return 0; + + return ext->length * sizeof(u32); +} + +/** + * struct mei_msg_hdr - MEI BUS Interface Section + * + * @me_addr: device address + * @host_addr: host address + * @length: message length + * @reserved: reserved + * @extended: message has extended header + * @dma_ring: message is on dma ring + * @internal: message is internal + * @msg_complete: last packet of the message + * @extension: extension of the header + */ +struct mei_msg_hdr { + u32 me_addr:8; + u32 host_addr:8; + u32 length:9; + u32 reserved:3; + u32 extended:1; + u32 dma_ring:1; + u32 internal:1; + u32 msg_complete:1; + u32 extension[]; +} __packed; + +/* The length is up to 9 bits */ +#define MEI_MSG_MAX_LEN_MASK GENMASK(9, 0) + +struct mei_bus_message { + u8 hbm_cmd; + u8 data[]; +} __packed; + +/** + * struct hbm_cl_cmd - client specific host bus command + * CONNECT, DISCONNECT, and FlOW CONTROL + * + * @hbm_cmd: bus message command header + * @me_addr: address of the client in ME + * @host_addr: address of the client in the driver + * @data: generic data + */ +struct mei_hbm_cl_cmd { + u8 hbm_cmd; + u8 me_addr; + u8 host_addr; + u8 data; +}; + +struct hbm_version { + u8 minor_version; + u8 major_version; +} __packed; + +struct hbm_host_version_request { + u8 hbm_cmd; + u8 reserved; + struct hbm_version host_version; +} __packed; + +struct hbm_host_version_response { + u8 hbm_cmd; + u8 host_version_supported; + struct hbm_version me_max_version; +} __packed; + +struct hbm_host_stop_request { + u8 hbm_cmd; + u8 reason; + u8 reserved[2]; +} __packed; + +struct hbm_host_stop_response { + u8 hbm_cmd; + u8 reserved[3]; +} __packed; + +struct hbm_me_stop_request { + u8 hbm_cmd; + u8 reason; + u8 reserved[2]; +} __packed; + +/** + * enum hbm_host_enum_flags - enumeration request flags (HBM version >= 2.0) + * + * @MEI_HBM_ENUM_F_ALLOW_ADD: allow dynamic clients add + * @MEI_HBM_ENUM_F_IMMEDIATE_ENUM: allow FW to send answer immediately + */ +enum hbm_host_enum_flags { + MEI_HBM_ENUM_F_ALLOW_ADD = BIT(0), + MEI_HBM_ENUM_F_IMMEDIATE_ENUM = BIT(1), +}; + +/** + * struct hbm_host_enum_request - enumeration request from host to fw + * + * @hbm_cmd : bus message command header + * @flags : request flags + * @reserved: reserved + */ +struct hbm_host_enum_request { + u8 hbm_cmd; + u8 flags; + u8 reserved[2]; +} __packed; + +struct hbm_host_enum_response { + u8 hbm_cmd; + u8 reserved[3]; + u8 valid_addresses[32]; +} __packed; + +/** + * struct mei_client_properties - mei client properties + * + * @protocol_name: guid of the client + * @protocol_version: client protocol version + * @max_number_of_connections: number of possible connections. + * @fixed_address: fixed me address (0 if the client is dynamic) + * @single_recv_buf: 1 if all connections share a single receive buffer. + * @vt_supported: the client support vtag + * @reserved: reserved + * @max_msg_length: MTU of the client + */ +struct mei_client_properties { + uuid_le protocol_name; + u8 protocol_version; + u8 max_number_of_connections; + u8 fixed_address; + u8 single_recv_buf:1; + u8 vt_supported:1; + u8 reserved:6; + u32 max_msg_length; +} __packed; + +struct hbm_props_request { + u8 hbm_cmd; + u8 me_addr; + u8 reserved[2]; +} __packed; + +struct hbm_props_response { + u8 hbm_cmd; + u8 me_addr; + u8 status; + u8 reserved; + struct mei_client_properties client_properties; +} __packed; + +/** + * struct hbm_add_client_request - request to add a client + * might be sent by fw after enumeration has already completed + * + * @hbm_cmd: bus message command header + * @me_addr: address of the client in ME + * @reserved: reserved + * @client_properties: client properties + */ +struct hbm_add_client_request { + u8 hbm_cmd; + u8 me_addr; + u8 reserved[2]; + struct mei_client_properties client_properties; +} __packed; + +/** + * struct hbm_add_client_response - response to add a client + * sent by the host to report client addition status to fw + * + * @hbm_cmd: bus message command header + * @me_addr: address of the client in ME + * @status: if HBMS_SUCCESS then the client can now accept connections. + * @reserved: reserved + */ +struct hbm_add_client_response { + u8 hbm_cmd; + u8 me_addr; + u8 status; + u8 reserved; +} __packed; + +/** + * struct hbm_power_gate - power gate request/response + * + * @hbm_cmd: bus message command header + * @reserved: reserved + */ +struct hbm_power_gate { + u8 hbm_cmd; + u8 reserved[3]; +} __packed; + +/** + * struct hbm_client_connect_request - connect/disconnect request + * + * @hbm_cmd: bus message command header + * @me_addr: address of the client in ME + * @host_addr: address of the client in the driver + * @reserved: reserved + */ +struct hbm_client_connect_request { + u8 hbm_cmd; + u8 me_addr; + u8 host_addr; + u8 reserved; +} __packed; + +/** + * struct hbm_client_connect_response - connect/disconnect response + * + * @hbm_cmd: bus message command header + * @me_addr: address of the client in ME + * @host_addr: address of the client in the driver + * @status: status of the request + */ +struct hbm_client_connect_response { + u8 hbm_cmd; + u8 me_addr; + u8 host_addr; + u8 status; +} __packed; + + +#define MEI_FC_MESSAGE_RESERVED_LENGTH 5 + +struct hbm_flow_control { + u8 hbm_cmd; + u8 me_addr; + u8 host_addr; + u8 reserved[MEI_FC_MESSAGE_RESERVED_LENGTH]; +} __packed; + +#define MEI_HBM_NOTIFICATION_START 1 +#define MEI_HBM_NOTIFICATION_STOP 0 +/** + * struct hbm_notification_request - start/stop notification request + * + * @hbm_cmd: bus message command header + * @me_addr: address of the client in ME + * @host_addr: address of the client in the driver + * @start: start = 1 or stop = 0 asynchronous notifications + */ +struct hbm_notification_request { + u8 hbm_cmd; + u8 me_addr; + u8 host_addr; + u8 start; +} __packed; + +/** + * struct hbm_notification_response - start/stop notification response + * + * @hbm_cmd: bus message command header + * @me_addr: address of the client in ME + * @host_addr: - address of the client in the driver + * @status: (mei_hbm_status) response status for the request + * - MEI_HBMS_SUCCESS: successful stop/start + * - MEI_HBMS_CLIENT_NOT_FOUND: if the connection could not be found. + * - MEI_HBMS_ALREADY_STARTED: for start requests for a previously + * started notification. + * - MEI_HBMS_NOT_STARTED: for stop request for a connected client for whom + * asynchronous notifications are currently disabled. + * + * @start: start = 1 or stop = 0 asynchronous notifications + * @reserved: reserved + */ +struct hbm_notification_response { + u8 hbm_cmd; + u8 me_addr; + u8 host_addr; + u8 status; + u8 start; + u8 reserved[3]; +} __packed; + +/** + * struct hbm_notification - notification event + * + * @hbm_cmd: bus message command header + * @me_addr: address of the client in ME + * @host_addr: address of the client in the driver + * @reserved: reserved for alignment + */ +struct hbm_notification { + u8 hbm_cmd; + u8 me_addr; + u8 host_addr; + u8 reserved; +} __packed; + +/** + * struct hbm_dma_mem_dscr - dma ring + * + * @addr_hi: the high 32bits of 64 bit address + * @addr_lo: the low 32bits of 64 bit address + * @size : size in bytes (must be power of 2) + */ +struct hbm_dma_mem_dscr { + u32 addr_hi; + u32 addr_lo; + u32 size; +} __packed; + +enum { + DMA_DSCR_HOST = 0, + DMA_DSCR_DEVICE = 1, + DMA_DSCR_CTRL = 2, + DMA_DSCR_NUM, +}; + +/** + * struct hbm_dma_setup_request - dma setup request + * + * @hbm_cmd: bus message command header + * @reserved: reserved for alignment + * @dma_dscr: dma descriptor for HOST, DEVICE, and CTRL + */ +struct hbm_dma_setup_request { + u8 hbm_cmd; + u8 reserved[3]; + struct hbm_dma_mem_dscr dma_dscr[DMA_DSCR_NUM]; +} __packed; + +/** + * struct hbm_dma_setup_response - dma setup response + * + * @hbm_cmd: bus message command header + * @status: 0 on success; otherwise DMA setup failed. + * @reserved: reserved for alignment + */ +struct hbm_dma_setup_response { + u8 hbm_cmd; + u8 status; + u8 reserved[2]; +} __packed; + +/** + * struct mei_dma_ring_ctrl - dma ring control block + * + * @hbuf_wr_idx: host circular buffer write index in slots + * @reserved1: reserved for alignment + * @hbuf_rd_idx: host circular buffer read index in slots + * @reserved2: reserved for alignment + * @dbuf_wr_idx: device circular buffer write index in slots + * @reserved3: reserved for alignment + * @dbuf_rd_idx: device circular buffer read index in slots + * @reserved4: reserved for alignment + */ +struct hbm_dma_ring_ctrl { + u32 hbuf_wr_idx; + u32 reserved1; + u32 hbuf_rd_idx; + u32 reserved2; + u32 dbuf_wr_idx; + u32 reserved3; + u32 dbuf_rd_idx; + u32 reserved4; +} __packed; + +/* virtual tag supported */ +#define HBM_CAP_VT BIT(0) + +/* gsc extended header support */ +#define HBM_CAP_GSC BIT(1) + +/* client dma supported */ +#define HBM_CAP_CD BIT(2) + +/** + * struct hbm_capability_request - capability request from host to fw + * + * @hbm_cmd : bus message command header + * @capability_requested: bitmask of capabilities requested by host + */ +struct hbm_capability_request { + u8 hbm_cmd; + u8 capability_requested[3]; +} __packed; + +/** + * struct hbm_capability_response - capability response from fw to host + * + * @hbm_cmd : bus message command header + * @capability_granted: bitmask of capabilities granted by FW + */ +struct hbm_capability_response { + u8 hbm_cmd; + u8 capability_granted[3]; +} __packed; + +/** + * struct hbm_client_dma_map_request - client dma map request from host to fw + * + * @hbm_cmd: bus message command header + * @client_buffer_id: client buffer id + * @reserved: reserved + * @address_lsb: DMA address LSB + * @address_msb: DMA address MSB + * @size: DMA size + */ +struct hbm_client_dma_map_request { + u8 hbm_cmd; + u8 client_buffer_id; + u8 reserved[2]; + u32 address_lsb; + u32 address_msb; + u32 size; +} __packed; + +/** + * struct hbm_client_dma_unmap_request + * client dma unmap request from the host to the firmware + * + * @hbm_cmd: bus message command header + * @status: unmap status + * @client_buffer_id: client buffer id + * @reserved: reserved + */ +struct hbm_client_dma_unmap_request { + u8 hbm_cmd; + u8 status; + u8 client_buffer_id; + u8 reserved; +} __packed; + +/** + * struct hbm_client_dma_response + * client dma unmap response from the firmware to the host + * + * @hbm_cmd: bus message command header + * @status: command status + */ +struct hbm_client_dma_response { + u8 hbm_cmd; + u8 status; +} __packed; + +#endif diff --git a/drivers/misc/mei/init.c b/drivers/misc/mei/init.c new file mode 100644 index 0000000000..c35e005b26 --- /dev/null +++ b/drivers/misc/mei/init.c @@ -0,0 +1,424 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2012-2022, Intel Corporation. All rights reserved. + * Intel Management Engine Interface (Intel MEI) Linux driver + */ + +#include <linux/export.h> +#include <linux/sched.h> +#include <linux/wait.h> +#include <linux/delay.h> + +#include <linux/mei.h> + +#include "mei_dev.h" +#include "hbm.h" +#include "client.h" + +const char *mei_dev_state_str(int state) +{ +#define MEI_DEV_STATE(state) case MEI_DEV_##state: return #state + switch (state) { + MEI_DEV_STATE(INITIALIZING); + MEI_DEV_STATE(INIT_CLIENTS); + MEI_DEV_STATE(ENABLED); + MEI_DEV_STATE(RESETTING); + MEI_DEV_STATE(DISABLED); + MEI_DEV_STATE(POWERING_DOWN); + MEI_DEV_STATE(POWER_DOWN); + MEI_DEV_STATE(POWER_UP); + default: + return "unknown"; + } +#undef MEI_DEV_STATE +} + +const char *mei_pg_state_str(enum mei_pg_state state) +{ +#define MEI_PG_STATE(state) case MEI_PG_##state: return #state + switch (state) { + MEI_PG_STATE(OFF); + MEI_PG_STATE(ON); + default: + return "unknown"; + } +#undef MEI_PG_STATE +} + +/** + * mei_fw_status2str - convert fw status registers to printable string + * + * @fw_status: firmware status + * @buf: string buffer at minimal size MEI_FW_STATUS_STR_SZ + * @len: buffer len must be >= MEI_FW_STATUS_STR_SZ + * + * Return: number of bytes written or -EINVAL if buffer is to small + */ +ssize_t mei_fw_status2str(struct mei_fw_status *fw_status, + char *buf, size_t len) +{ + ssize_t cnt = 0; + int i; + + buf[0] = '\0'; + + if (len < MEI_FW_STATUS_STR_SZ) + return -EINVAL; + + for (i = 0; i < fw_status->count; i++) + cnt += scnprintf(buf + cnt, len - cnt, "%08X ", + fw_status->status[i]); + + /* drop last space */ + buf[cnt] = '\0'; + return cnt; +} +EXPORT_SYMBOL_GPL(mei_fw_status2str); + +/** + * mei_cancel_work - Cancel mei background jobs + * + * @dev: the device structure + */ +void mei_cancel_work(struct mei_device *dev) +{ + cancel_work_sync(&dev->reset_work); + cancel_work_sync(&dev->bus_rescan_work); + + cancel_delayed_work_sync(&dev->timer_work); +} +EXPORT_SYMBOL_GPL(mei_cancel_work); + +/** + * mei_reset - resets host and fw. + * + * @dev: the device structure + * + * Return: 0 on success or < 0 if the reset hasn't succeeded + */ +int mei_reset(struct mei_device *dev) +{ + enum mei_dev_state state = dev->dev_state; + bool interrupts_enabled; + int ret; + + if (state != MEI_DEV_INITIALIZING && + state != MEI_DEV_DISABLED && + state != MEI_DEV_POWER_DOWN && + state != MEI_DEV_POWER_UP) { + char fw_sts_str[MEI_FW_STATUS_STR_SZ]; + + mei_fw_status_str(dev, fw_sts_str, MEI_FW_STATUS_STR_SZ); + dev_warn(dev->dev, "unexpected reset: dev_state = %s fw status = %s\n", + mei_dev_state_str(state), fw_sts_str); + } + + mei_clear_interrupts(dev); + + /* we're already in reset, cancel the init timer + * if the reset was called due the hbm protocol error + * we need to call it before hw start + * so the hbm watchdog won't kick in + */ + mei_hbm_idle(dev); + + /* enter reset flow */ + interrupts_enabled = state != MEI_DEV_POWER_DOWN; + mei_set_devstate(dev, MEI_DEV_RESETTING); + + dev->reset_count++; + if (dev->reset_count > MEI_MAX_CONSEC_RESET) { + dev_err(dev->dev, "reset: reached maximal consecutive resets: disabling the device\n"); + mei_set_devstate(dev, MEI_DEV_DISABLED); + return -ENODEV; + } + + ret = mei_hw_reset(dev, interrupts_enabled); + /* fall through and remove the sw state even if hw reset has failed */ + + /* no need to clean up software state in case of power up */ + if (state != MEI_DEV_INITIALIZING && state != MEI_DEV_POWER_UP) + mei_cl_all_disconnect(dev); + + mei_hbm_reset(dev); + + /* clean stale FW version */ + dev->fw_ver_received = 0; + + memset(dev->rd_msg_hdr, 0, sizeof(dev->rd_msg_hdr)); + + if (ret) { + dev_err(dev->dev, "hw_reset failed ret = %d\n", ret); + return ret; + } + + if (state == MEI_DEV_POWER_DOWN) { + dev_dbg(dev->dev, "powering down: end of reset\n"); + mei_set_devstate(dev, MEI_DEV_DISABLED); + return 0; + } + + ret = mei_hw_start(dev); + if (ret) { + char fw_sts_str[MEI_FW_STATUS_STR_SZ]; + + mei_fw_status_str(dev, fw_sts_str, MEI_FW_STATUS_STR_SZ); + dev_err(dev->dev, "hw_start failed ret = %d fw status = %s\n", ret, fw_sts_str); + return ret; + } + + if (dev->dev_state != MEI_DEV_RESETTING) { + dev_dbg(dev->dev, "wrong state = %d on link start\n", dev->dev_state); + return 0; + } + + dev_dbg(dev->dev, "link is established start sending messages.\n"); + + mei_set_devstate(dev, MEI_DEV_INIT_CLIENTS); + ret = mei_hbm_start_req(dev); + if (ret) { + dev_err(dev->dev, "hbm_start failed ret = %d\n", ret); + mei_set_devstate(dev, MEI_DEV_RESETTING); + return ret; + } + + return 0; +} +EXPORT_SYMBOL_GPL(mei_reset); + +/** + * mei_start - initializes host and fw to start work. + * + * @dev: the device structure + * + * Return: 0 on success, <0 on failure. + */ +int mei_start(struct mei_device *dev) +{ + int ret; + + mutex_lock(&dev->device_lock); + + /* acknowledge interrupt and stop interrupts */ + mei_clear_interrupts(dev); + + ret = mei_hw_config(dev); + if (ret) + goto err; + + dev_dbg(dev->dev, "reset in start the mei device.\n"); + + dev->reset_count = 0; + do { + mei_set_devstate(dev, MEI_DEV_INITIALIZING); + ret = mei_reset(dev); + + if (ret == -ENODEV || dev->dev_state == MEI_DEV_DISABLED) { + dev_err(dev->dev, "reset failed ret = %d", ret); + goto err; + } + } while (ret); + + if (mei_hbm_start_wait(dev)) { + dev_err(dev->dev, "HBM haven't started"); + goto err; + } + + if (!mei_hbm_version_is_supported(dev)) { + dev_dbg(dev->dev, "MEI start failed.\n"); + goto err; + } + + dev_dbg(dev->dev, "link layer has been established.\n"); + + mutex_unlock(&dev->device_lock); + return 0; +err: + dev_err(dev->dev, "link layer initialization failed.\n"); + mei_set_devstate(dev, MEI_DEV_DISABLED); + mutex_unlock(&dev->device_lock); + return -ENODEV; +} +EXPORT_SYMBOL_GPL(mei_start); + +/** + * mei_restart - restart device after suspend + * + * @dev: the device structure + * + * Return: 0 on success or -ENODEV if the restart hasn't succeeded + */ +int mei_restart(struct mei_device *dev) +{ + int err; + + mutex_lock(&dev->device_lock); + + mei_set_devstate(dev, MEI_DEV_POWER_UP); + dev->reset_count = 0; + + err = mei_reset(dev); + + mutex_unlock(&dev->device_lock); + + if (err == -ENODEV || dev->dev_state == MEI_DEV_DISABLED) { + dev_err(dev->dev, "device disabled = %d\n", err); + return -ENODEV; + } + + /* try to start again */ + if (err) + schedule_work(&dev->reset_work); + + + return 0; +} +EXPORT_SYMBOL_GPL(mei_restart); + +static void mei_reset_work(struct work_struct *work) +{ + struct mei_device *dev = + container_of(work, struct mei_device, reset_work); + int ret; + + mei_clear_interrupts(dev); + mei_synchronize_irq(dev); + + mutex_lock(&dev->device_lock); + + ret = mei_reset(dev); + + mutex_unlock(&dev->device_lock); + + if (dev->dev_state == MEI_DEV_DISABLED) { + dev_err(dev->dev, "device disabled = %d\n", ret); + return; + } + + /* retry reset in case of failure */ + if (ret) + schedule_work(&dev->reset_work); +} + +void mei_stop(struct mei_device *dev) +{ + dev_dbg(dev->dev, "stopping the device.\n"); + + mutex_lock(&dev->device_lock); + mei_set_devstate(dev, MEI_DEV_POWERING_DOWN); + mutex_unlock(&dev->device_lock); + mei_cl_bus_remove_devices(dev); + mutex_lock(&dev->device_lock); + mei_set_devstate(dev, MEI_DEV_POWER_DOWN); + mutex_unlock(&dev->device_lock); + + mei_cancel_work(dev); + + mei_clear_interrupts(dev); + mei_synchronize_irq(dev); + /* to catch HW-initiated reset */ + mei_cancel_work(dev); + + mutex_lock(&dev->device_lock); + + mei_reset(dev); + /* move device to disabled state unconditionally */ + mei_set_devstate(dev, MEI_DEV_DISABLED); + + mutex_unlock(&dev->device_lock); +} +EXPORT_SYMBOL_GPL(mei_stop); + +/** + * mei_write_is_idle - check if the write queues are idle + * + * @dev: the device structure + * + * Return: true of there is no pending write + */ +bool mei_write_is_idle(struct mei_device *dev) +{ + bool idle = (dev->dev_state == MEI_DEV_ENABLED && + list_empty(&dev->ctrl_wr_list) && + list_empty(&dev->write_list) && + list_empty(&dev->write_waiting_list)); + + dev_dbg(dev->dev, "write pg: is idle[%d] state=%s ctrl=%01d write=%01d wwait=%01d\n", + idle, + mei_dev_state_str(dev->dev_state), + list_empty(&dev->ctrl_wr_list), + list_empty(&dev->write_list), + list_empty(&dev->write_waiting_list)); + + return idle; +} +EXPORT_SYMBOL_GPL(mei_write_is_idle); + +/** + * mei_device_init - initialize mei_device structure + * + * @dev: the mei device + * @device: the device structure + * @slow_fw: configure longer timeouts as FW is slow + * @hw_ops: hw operations + */ +void mei_device_init(struct mei_device *dev, + struct device *device, + bool slow_fw, + const struct mei_hw_ops *hw_ops) +{ + /* setup our list array */ + INIT_LIST_HEAD(&dev->file_list); + INIT_LIST_HEAD(&dev->device_list); + INIT_LIST_HEAD(&dev->me_clients); + mutex_init(&dev->device_lock); + init_rwsem(&dev->me_clients_rwsem); + mutex_init(&dev->cl_bus_lock); + init_waitqueue_head(&dev->wait_hw_ready); + init_waitqueue_head(&dev->wait_pg); + init_waitqueue_head(&dev->wait_hbm_start); + dev->dev_state = MEI_DEV_INITIALIZING; + dev->reset_count = 0; + + INIT_LIST_HEAD(&dev->write_list); + INIT_LIST_HEAD(&dev->write_waiting_list); + INIT_LIST_HEAD(&dev->ctrl_wr_list); + INIT_LIST_HEAD(&dev->ctrl_rd_list); + dev->tx_queue_limit = MEI_TX_QUEUE_LIMIT_DEFAULT; + + INIT_DELAYED_WORK(&dev->timer_work, mei_timer); + INIT_WORK(&dev->reset_work, mei_reset_work); + INIT_WORK(&dev->bus_rescan_work, mei_cl_bus_rescan_work); + + bitmap_zero(dev->host_clients_map, MEI_CLIENTS_MAX); + dev->open_handle_count = 0; + + dev->pxp_mode = MEI_DEV_PXP_DEFAULT; + + /* + * Reserving the first client ID + * 0: Reserved for MEI Bus Message communications + */ + bitmap_set(dev->host_clients_map, 0, 1); + + dev->pg_event = MEI_PG_EVENT_IDLE; + dev->ops = hw_ops; + dev->dev = device; + + dev->timeouts.hw_ready = mei_secs_to_jiffies(MEI_HW_READY_TIMEOUT); + dev->timeouts.connect = MEI_CONNECT_TIMEOUT; + dev->timeouts.client_init = MEI_CLIENTS_INIT_TIMEOUT; + dev->timeouts.pgi = mei_secs_to_jiffies(MEI_PGI_TIMEOUT); + dev->timeouts.d0i3 = mei_secs_to_jiffies(MEI_D0I3_TIMEOUT); + if (slow_fw) { + dev->timeouts.cl_connect = mei_secs_to_jiffies(MEI_CL_CONNECT_TIMEOUT_SLOW); + dev->timeouts.hbm = mei_secs_to_jiffies(MEI_HBM_TIMEOUT_SLOW); + dev->timeouts.mkhi_recv = msecs_to_jiffies(MKHI_RCV_TIMEOUT_SLOW); + } else { + dev->timeouts.cl_connect = mei_secs_to_jiffies(MEI_CL_CONNECT_TIMEOUT); + dev->timeouts.hbm = mei_secs_to_jiffies(MEI_HBM_TIMEOUT); + dev->timeouts.mkhi_recv = msecs_to_jiffies(MKHI_RCV_TIMEOUT); + } +} +EXPORT_SYMBOL_GPL(mei_device_init); + diff --git a/drivers/misc/mei/interrupt.c b/drivers/misc/mei/interrupt.c new file mode 100644 index 0000000000..0a0e984e56 --- /dev/null +++ b/drivers/misc/mei/interrupt.c @@ -0,0 +1,688 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2003-2018, Intel Corporation. All rights reserved. + * Intel Management Engine Interface (Intel MEI) Linux driver + */ + +#include <linux/export.h> +#include <linux/kthread.h> +#include <linux/interrupt.h> +#include <linux/fs.h> +#include <linux/jiffies.h> +#include <linux/slab.h> +#include <linux/pm_runtime.h> + +#include <linux/mei.h> + +#include "mei_dev.h" +#include "hbm.h" +#include "client.h" + + +/** + * mei_irq_compl_handler - dispatch complete handlers + * for the completed callbacks + * + * @dev: mei device + * @cmpl_list: list of completed cbs + */ +void mei_irq_compl_handler(struct mei_device *dev, struct list_head *cmpl_list) +{ + struct mei_cl_cb *cb, *next; + struct mei_cl *cl; + + list_for_each_entry_safe(cb, next, cmpl_list, list) { + cl = cb->cl; + list_del_init(&cb->list); + + dev_dbg(dev->dev, "completing call back.\n"); + mei_cl_complete(cl, cb); + } +} +EXPORT_SYMBOL_GPL(mei_irq_compl_handler); + +/** + * mei_cl_hbm_equal - check if hbm is addressed to the client + * + * @cl: host client + * @mei_hdr: header of mei client message + * + * Return: true if matches, false otherwise + */ +static inline int mei_cl_hbm_equal(struct mei_cl *cl, + struct mei_msg_hdr *mei_hdr) +{ + return mei_cl_host_addr(cl) == mei_hdr->host_addr && + mei_cl_me_id(cl) == mei_hdr->me_addr; +} + +/** + * mei_irq_discard_msg - discard received message + * + * @dev: mei device + * @hdr: message header + * @discard_len: the length of the message to discard (excluding header) + */ +static void mei_irq_discard_msg(struct mei_device *dev, struct mei_msg_hdr *hdr, + size_t discard_len) +{ + if (hdr->dma_ring) { + mei_dma_ring_read(dev, NULL, + hdr->extension[dev->rd_msg_hdr_count - 2]); + discard_len = 0; + } + /* + * no need to check for size as it is guarantied + * that length fits into rd_msg_buf + */ + mei_read_slots(dev, dev->rd_msg_buf, discard_len); + dev_dbg(dev->dev, "discarding message " MEI_HDR_FMT "\n", + MEI_HDR_PRM(hdr)); +} + +/** + * mei_cl_irq_read_msg - process client message + * + * @cl: reading client + * @mei_hdr: header of mei client message + * @meta: extend meta header + * @cmpl_list: completion list + * + * Return: always 0 + */ +static int mei_cl_irq_read_msg(struct mei_cl *cl, + struct mei_msg_hdr *mei_hdr, + struct mei_ext_meta_hdr *meta, + struct list_head *cmpl_list) +{ + struct mei_device *dev = cl->dev; + struct mei_cl_cb *cb; + + struct mei_ext_hdr_vtag *vtag_hdr = NULL; + struct mei_ext_hdr_gsc_f2h *gsc_f2h = NULL; + + size_t buf_sz; + u32 length; + u32 ext_len; + + length = mei_hdr->length; + ext_len = 0; + if (mei_hdr->extended) { + ext_len = sizeof(*meta) + mei_slots2data(meta->size); + length -= ext_len; + } + + cb = list_first_entry_or_null(&cl->rd_pending, struct mei_cl_cb, list); + if (!cb) { + if (!mei_cl_is_fixed_address(cl)) { + cl_err(dev, cl, "pending read cb not found\n"); + goto discard; + } + cb = mei_cl_alloc_cb(cl, mei_cl_mtu(cl), MEI_FOP_READ, cl->fp); + if (!cb) + goto discard; + list_add_tail(&cb->list, &cl->rd_pending); + } + + if (mei_hdr->extended) { + struct mei_ext_hdr *ext = mei_ext_begin(meta); + do { + switch (ext->type) { + case MEI_EXT_HDR_VTAG: + vtag_hdr = (struct mei_ext_hdr_vtag *)ext; + break; + case MEI_EXT_HDR_GSC: + gsc_f2h = (struct mei_ext_hdr_gsc_f2h *)ext; + cb->ext_hdr = kzalloc(sizeof(*gsc_f2h), GFP_KERNEL); + if (!cb->ext_hdr) { + cb->status = -ENOMEM; + goto discard; + } + break; + case MEI_EXT_HDR_NONE: + fallthrough; + default: + cl_err(dev, cl, "unknown extended header\n"); + cb->status = -EPROTO; + break; + } + + ext = mei_ext_next(ext); + } while (!mei_ext_last(meta, ext)); + + if (!vtag_hdr && !gsc_f2h) { + cl_dbg(dev, cl, "no vtag or gsc found in extended header.\n"); + cb->status = -EPROTO; + goto discard; + } + } + + if (vtag_hdr) { + cl_dbg(dev, cl, "vtag: %d\n", vtag_hdr->vtag); + if (cb->vtag && cb->vtag != vtag_hdr->vtag) { + cl_err(dev, cl, "mismatched tag: %d != %d\n", + cb->vtag, vtag_hdr->vtag); + cb->status = -EPROTO; + goto discard; + } + cb->vtag = vtag_hdr->vtag; + } + + if (gsc_f2h) { + u32 ext_hdr_len = mei_ext_hdr_len(&gsc_f2h->hdr); + + if (!dev->hbm_f_gsc_supported) { + cl_err(dev, cl, "gsc extended header is not supported\n"); + cb->status = -EPROTO; + goto discard; + } + + if (length) { + cl_err(dev, cl, "no data allowed in cb with gsc\n"); + cb->status = -EPROTO; + goto discard; + } + if (ext_hdr_len > sizeof(*gsc_f2h)) { + cl_err(dev, cl, "gsc extended header is too big %u\n", ext_hdr_len); + cb->status = -EPROTO; + goto discard; + } + memcpy(cb->ext_hdr, gsc_f2h, ext_hdr_len); + } + + if (!mei_cl_is_connected(cl)) { + cl_dbg(dev, cl, "not connected\n"); + cb->status = -ENODEV; + goto discard; + } + + if (mei_hdr->dma_ring) + length = mei_hdr->extension[mei_data2slots(ext_len)]; + + buf_sz = length + cb->buf_idx; + /* catch for integer overflow */ + if (buf_sz < cb->buf_idx) { + cl_err(dev, cl, "message is too big len %d idx %zu\n", + length, cb->buf_idx); + cb->status = -EMSGSIZE; + goto discard; + } + + if (cb->buf.size < buf_sz) { + cl_dbg(dev, cl, "message overflow. size %zu len %d idx %zu\n", + cb->buf.size, length, cb->buf_idx); + cb->status = -EMSGSIZE; + goto discard; + } + + if (mei_hdr->dma_ring) { + mei_dma_ring_read(dev, cb->buf.data + cb->buf_idx, length); + /* for DMA read 0 length to generate interrupt to the device */ + mei_read_slots(dev, cb->buf.data + cb->buf_idx, 0); + } else { + mei_read_slots(dev, cb->buf.data + cb->buf_idx, length); + } + + cb->buf_idx += length; + + if (mei_hdr->msg_complete) { + cl_dbg(dev, cl, "completed read length = %zu\n", cb->buf_idx); + list_move_tail(&cb->list, cmpl_list); + } else { + pm_runtime_mark_last_busy(dev->dev); + pm_request_autosuspend(dev->dev); + } + + return 0; + +discard: + if (cb) + list_move_tail(&cb->list, cmpl_list); + mei_irq_discard_msg(dev, mei_hdr, length); + return 0; +} + +/** + * mei_cl_irq_disconnect_rsp - send disconnection response message + * + * @cl: client + * @cb: callback block. + * @cmpl_list: complete list. + * + * Return: 0, OK; otherwise, error. + */ +static int mei_cl_irq_disconnect_rsp(struct mei_cl *cl, struct mei_cl_cb *cb, + struct list_head *cmpl_list) +{ + struct mei_device *dev = cl->dev; + u32 msg_slots; + int slots; + int ret; + + msg_slots = mei_hbm2slots(sizeof(struct hbm_client_connect_response)); + slots = mei_hbuf_empty_slots(dev); + if (slots < 0) + return -EOVERFLOW; + + if ((u32)slots < msg_slots) + return -EMSGSIZE; + + ret = mei_hbm_cl_disconnect_rsp(dev, cl); + list_move_tail(&cb->list, cmpl_list); + + return ret; +} + +/** + * mei_cl_irq_read - processes client read related operation from the + * interrupt thread context - request for flow control credits + * + * @cl: client + * @cb: callback block. + * @cmpl_list: complete list. + * + * Return: 0, OK; otherwise, error. + */ +static int mei_cl_irq_read(struct mei_cl *cl, struct mei_cl_cb *cb, + struct list_head *cmpl_list) +{ + struct mei_device *dev = cl->dev; + u32 msg_slots; + int slots; + int ret; + + if (!list_empty(&cl->rd_pending)) + return 0; + + msg_slots = mei_hbm2slots(sizeof(struct hbm_flow_control)); + slots = mei_hbuf_empty_slots(dev); + if (slots < 0) + return -EOVERFLOW; + + if ((u32)slots < msg_slots) + return -EMSGSIZE; + + ret = mei_hbm_cl_flow_control_req(dev, cl); + if (ret) { + cl->status = ret; + cb->buf_idx = 0; + list_move_tail(&cb->list, cmpl_list); + return ret; + } + + pm_runtime_mark_last_busy(dev->dev); + pm_request_autosuspend(dev->dev); + + list_move_tail(&cb->list, &cl->rd_pending); + + return 0; +} + +static inline bool hdr_is_hbm(struct mei_msg_hdr *mei_hdr) +{ + return mei_hdr->host_addr == 0 && mei_hdr->me_addr == 0; +} + +static inline bool hdr_is_fixed(struct mei_msg_hdr *mei_hdr) +{ + return mei_hdr->host_addr == 0 && mei_hdr->me_addr != 0; +} + +static inline int hdr_is_valid(u32 msg_hdr) +{ + struct mei_msg_hdr *mei_hdr; + u32 expected_len = 0; + + mei_hdr = (struct mei_msg_hdr *)&msg_hdr; + if (!msg_hdr || mei_hdr->reserved) + return -EBADMSG; + + if (mei_hdr->dma_ring) + expected_len += MEI_SLOT_SIZE; + if (mei_hdr->extended) + expected_len += MEI_SLOT_SIZE; + if (mei_hdr->length < expected_len) + return -EBADMSG; + + return 0; +} + +/** + * mei_irq_read_handler - bottom half read routine after ISR to + * handle the read processing. + * + * @dev: the device structure + * @cmpl_list: An instance of our list structure + * @slots: slots to read. + * + * Return: 0 on success, <0 on failure. + */ +int mei_irq_read_handler(struct mei_device *dev, + struct list_head *cmpl_list, s32 *slots) +{ + struct mei_msg_hdr *mei_hdr; + struct mei_ext_meta_hdr *meta_hdr = NULL; + struct mei_cl *cl; + int ret; + u32 hdr_size_left; + u32 hdr_size_ext; + int i; + int ext_hdr_end; + + if (!dev->rd_msg_hdr[0]) { + dev->rd_msg_hdr[0] = mei_read_hdr(dev); + dev->rd_msg_hdr_count = 1; + (*slots)--; + dev_dbg(dev->dev, "slots =%08x.\n", *slots); + + ret = hdr_is_valid(dev->rd_msg_hdr[0]); + if (ret) { + dev_err(dev->dev, "corrupted message header 0x%08X\n", + dev->rd_msg_hdr[0]); + goto end; + } + } + + mei_hdr = (struct mei_msg_hdr *)dev->rd_msg_hdr; + dev_dbg(dev->dev, MEI_HDR_FMT, MEI_HDR_PRM(mei_hdr)); + + if (mei_slots2data(*slots) < mei_hdr->length) { + dev_err(dev->dev, "less data available than length=%08x.\n", + *slots); + /* we can't read the message */ + ret = -ENODATA; + goto end; + } + + ext_hdr_end = 1; + hdr_size_left = mei_hdr->length; + + if (mei_hdr->extended) { + if (!dev->rd_msg_hdr[1]) { + dev->rd_msg_hdr[1] = mei_read_hdr(dev); + dev->rd_msg_hdr_count++; + (*slots)--; + dev_dbg(dev->dev, "extended header is %08x\n", dev->rd_msg_hdr[1]); + } + meta_hdr = ((struct mei_ext_meta_hdr *)&dev->rd_msg_hdr[1]); + if (check_add_overflow((u32)sizeof(*meta_hdr), + mei_slots2data(meta_hdr->size), + &hdr_size_ext)) { + dev_err(dev->dev, "extended message size too big %d\n", + meta_hdr->size); + return -EBADMSG; + } + if (hdr_size_left < hdr_size_ext) { + dev_err(dev->dev, "corrupted message header len %d\n", + mei_hdr->length); + return -EBADMSG; + } + hdr_size_left -= hdr_size_ext; + + ext_hdr_end = meta_hdr->size + 2; + for (i = dev->rd_msg_hdr_count; i < ext_hdr_end; i++) { + dev->rd_msg_hdr[i] = mei_read_hdr(dev); + dev_dbg(dev->dev, "extended header %d is %08x\n", i, + dev->rd_msg_hdr[i]); + dev->rd_msg_hdr_count++; + (*slots)--; + } + } + + if (mei_hdr->dma_ring) { + if (hdr_size_left != sizeof(dev->rd_msg_hdr[ext_hdr_end])) { + dev_err(dev->dev, "corrupted message header len %d\n", + mei_hdr->length); + return -EBADMSG; + } + + dev->rd_msg_hdr[ext_hdr_end] = mei_read_hdr(dev); + dev->rd_msg_hdr_count++; + (*slots)--; + mei_hdr->length -= sizeof(dev->rd_msg_hdr[ext_hdr_end]); + } + + /* HBM message */ + if (hdr_is_hbm(mei_hdr)) { + ret = mei_hbm_dispatch(dev, mei_hdr); + if (ret) { + dev_dbg(dev->dev, "mei_hbm_dispatch failed ret = %d\n", + ret); + goto end; + } + goto reset_slots; + } + + /* find recipient cl */ + list_for_each_entry(cl, &dev->file_list, link) { + if (mei_cl_hbm_equal(cl, mei_hdr)) { + cl_dbg(dev, cl, "got a message\n"); + ret = mei_cl_irq_read_msg(cl, mei_hdr, meta_hdr, cmpl_list); + goto reset_slots; + } + } + + /* if no recipient cl was found we assume corrupted header */ + /* A message for not connected fixed address clients + * should be silently discarded + * On power down client may be force cleaned, + * silently discard such messages + */ + if (hdr_is_fixed(mei_hdr) || + dev->dev_state == MEI_DEV_POWER_DOWN) { + mei_irq_discard_msg(dev, mei_hdr, mei_hdr->length); + ret = 0; + goto reset_slots; + } + dev_err(dev->dev, "no destination client found 0x%08X\n", dev->rd_msg_hdr[0]); + ret = -EBADMSG; + goto end; + +reset_slots: + /* reset the number of slots and header */ + memset(dev->rd_msg_hdr, 0, sizeof(dev->rd_msg_hdr)); + dev->rd_msg_hdr_count = 0; + *slots = mei_count_full_read_slots(dev); + if (*slots == -EOVERFLOW) { + /* overflow - reset */ + dev_err(dev->dev, "resetting due to slots overflow.\n"); + /* set the event since message has been read */ + ret = -ERANGE; + goto end; + } +end: + return ret; +} +EXPORT_SYMBOL_GPL(mei_irq_read_handler); + + +/** + * mei_irq_write_handler - dispatch write requests + * after irq received + * + * @dev: the device structure + * @cmpl_list: An instance of our list structure + * + * Return: 0 on success, <0 on failure. + */ +int mei_irq_write_handler(struct mei_device *dev, struct list_head *cmpl_list) +{ + + struct mei_cl *cl; + struct mei_cl_cb *cb, *next; + s32 slots; + int ret; + + + if (!mei_hbuf_acquire(dev)) + return 0; + + slots = mei_hbuf_empty_slots(dev); + if (slots < 0) + return -EOVERFLOW; + + if (slots == 0) + return -EMSGSIZE; + + /* complete all waiting for write CB */ + dev_dbg(dev->dev, "complete all waiting for write cb.\n"); + + list_for_each_entry_safe(cb, next, &dev->write_waiting_list, list) { + cl = cb->cl; + + cl->status = 0; + cl_dbg(dev, cl, "MEI WRITE COMPLETE\n"); + cl->writing_state = MEI_WRITE_COMPLETE; + list_move_tail(&cb->list, cmpl_list); + } + + /* complete control write list CB */ + dev_dbg(dev->dev, "complete control write list cb.\n"); + list_for_each_entry_safe(cb, next, &dev->ctrl_wr_list, list) { + cl = cb->cl; + switch (cb->fop_type) { + case MEI_FOP_DISCONNECT: + /* send disconnect message */ + ret = mei_cl_irq_disconnect(cl, cb, cmpl_list); + if (ret) + return ret; + + break; + case MEI_FOP_READ: + /* send flow control message */ + ret = mei_cl_irq_read(cl, cb, cmpl_list); + if (ret) + return ret; + + break; + case MEI_FOP_CONNECT: + /* connect message */ + ret = mei_cl_irq_connect(cl, cb, cmpl_list); + if (ret) + return ret; + + break; + case MEI_FOP_DISCONNECT_RSP: + /* send disconnect resp */ + ret = mei_cl_irq_disconnect_rsp(cl, cb, cmpl_list); + if (ret) + return ret; + break; + + case MEI_FOP_NOTIFY_START: + case MEI_FOP_NOTIFY_STOP: + ret = mei_cl_irq_notify(cl, cb, cmpl_list); + if (ret) + return ret; + break; + case MEI_FOP_DMA_MAP: + ret = mei_cl_irq_dma_map(cl, cb, cmpl_list); + if (ret) + return ret; + break; + case MEI_FOP_DMA_UNMAP: + ret = mei_cl_irq_dma_unmap(cl, cb, cmpl_list); + if (ret) + return ret; + break; + default: + BUG(); + } + + } + /* complete write list CB */ + dev_dbg(dev->dev, "complete write list cb.\n"); + list_for_each_entry_safe(cb, next, &dev->write_list, list) { + cl = cb->cl; + ret = mei_cl_irq_write(cl, cb, cmpl_list); + if (ret) + return ret; + } + return 0; +} +EXPORT_SYMBOL_GPL(mei_irq_write_handler); + + +/** + * mei_connect_timeout - connect/disconnect timeouts + * + * @cl: host client + */ +static void mei_connect_timeout(struct mei_cl *cl) +{ + struct mei_device *dev = cl->dev; + + if (cl->state == MEI_FILE_CONNECTING) { + if (dev->hbm_f_dot_supported) { + cl->state = MEI_FILE_DISCONNECT_REQUIRED; + wake_up(&cl->wait); + return; + } + } + mei_reset(dev); +} + +#define MEI_STALL_TIMER_FREQ (2 * HZ) +/** + * mei_schedule_stall_timer - re-arm stall_timer work + * + * Schedule stall timer + * + * @dev: the device structure + */ +void mei_schedule_stall_timer(struct mei_device *dev) +{ + schedule_delayed_work(&dev->timer_work, MEI_STALL_TIMER_FREQ); +} + +/** + * mei_timer - timer function. + * + * @work: pointer to the work_struct structure + * + */ +void mei_timer(struct work_struct *work) +{ + struct mei_cl *cl; + struct mei_device *dev = container_of(work, + struct mei_device, timer_work.work); + bool reschedule_timer = false; + + mutex_lock(&dev->device_lock); + + /* Catch interrupt stalls during HBM init handshake */ + if (dev->dev_state == MEI_DEV_INIT_CLIENTS && + dev->hbm_state != MEI_HBM_IDLE) { + + if (dev->init_clients_timer) { + if (--dev->init_clients_timer == 0) { + dev_err(dev->dev, "timer: init clients timeout hbm_state = %d.\n", + dev->hbm_state); + mei_reset(dev); + goto out; + } + reschedule_timer = true; + } + } + + if (dev->dev_state != MEI_DEV_ENABLED) + goto out; + + /*** connect/disconnect timeouts ***/ + list_for_each_entry(cl, &dev->file_list, link) { + if (cl->timer_count) { + if (--cl->timer_count == 0) { + dev_err(dev->dev, "timer: connect/disconnect timeout.\n"); + mei_connect_timeout(cl); + goto out; + } + reschedule_timer = true; + } + } + +out: + if (dev->dev_state != MEI_DEV_DISABLED && reschedule_timer) + mei_schedule_stall_timer(dev); + + mutex_unlock(&dev->device_lock); +} diff --git a/drivers/misc/mei/main.c b/drivers/misc/mei/main.c new file mode 100644 index 0000000000..bb4e9eabda --- /dev/null +++ b/drivers/misc/mei/main.c @@ -0,0 +1,1318 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2003-2022, Intel Corporation. All rights reserved. + * Intel Management Engine Interface (Intel MEI) Linux driver + */ + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/kernel.h> +#include <linux/device.h> +#include <linux/slab.h> +#include <linux/fs.h> +#include <linux/errno.h> +#include <linux/types.h> +#include <linux/fcntl.h> +#include <linux/poll.h> +#include <linux/init.h> +#include <linux/ioctl.h> +#include <linux/cdev.h> +#include <linux/sched/signal.h> +#include <linux/compat.h> +#include <linux/jiffies.h> +#include <linux/interrupt.h> + +#include <linux/mei.h> + +#include "mei_dev.h" +#include "client.h" + +static const struct class mei_class = { + .name = "mei", +}; + +static dev_t mei_devt; +#define MEI_MAX_DEVS MINORMASK +static DEFINE_MUTEX(mei_minor_lock); +static DEFINE_IDR(mei_idr); + +/** + * mei_open - the open function + * + * @inode: pointer to inode structure + * @file: pointer to file structure + * + * Return: 0 on success, <0 on error + */ +static int mei_open(struct inode *inode, struct file *file) +{ + struct mei_device *dev; + struct mei_cl *cl; + + int err; + + dev = container_of(inode->i_cdev, struct mei_device, cdev); + + mutex_lock(&dev->device_lock); + + if (dev->dev_state != MEI_DEV_ENABLED) { + dev_dbg(dev->dev, "dev_state != MEI_ENABLED dev_state = %s\n", + mei_dev_state_str(dev->dev_state)); + err = -ENODEV; + goto err_unlock; + } + + cl = mei_cl_alloc_linked(dev); + if (IS_ERR(cl)) { + err = PTR_ERR(cl); + goto err_unlock; + } + + cl->fp = file; + file->private_data = cl; + + mutex_unlock(&dev->device_lock); + + return nonseekable_open(inode, file); + +err_unlock: + mutex_unlock(&dev->device_lock); + return err; +} + +/** + * mei_cl_vtag_remove_by_fp - remove vtag that corresponds to fp from list + * + * @cl: host client + * @fp: pointer to file structure + * + */ +static void mei_cl_vtag_remove_by_fp(const struct mei_cl *cl, + const struct file *fp) +{ + struct mei_cl_vtag *vtag_l, *next; + + list_for_each_entry_safe(vtag_l, next, &cl->vtag_map, list) { + if (vtag_l->fp == fp) { + list_del(&vtag_l->list); + kfree(vtag_l); + return; + } + } +} + +/** + * mei_release - the release function + * + * @inode: pointer to inode structure + * @file: pointer to file structure + * + * Return: 0 on success, <0 on error + */ +static int mei_release(struct inode *inode, struct file *file) +{ + struct mei_cl *cl = file->private_data; + struct mei_device *dev; + int rets; + + if (WARN_ON(!cl || !cl->dev)) + return -ENODEV; + + dev = cl->dev; + + mutex_lock(&dev->device_lock); + + mei_cl_vtag_remove_by_fp(cl, file); + + if (!list_empty(&cl->vtag_map)) { + cl_dbg(dev, cl, "not the last vtag\n"); + mei_cl_flush_queues(cl, file); + rets = 0; + goto out; + } + + rets = mei_cl_disconnect(cl); + /* + * Check again: This is necessary since disconnect releases the lock + * and another client can connect in the meantime. + */ + if (!list_empty(&cl->vtag_map)) { + cl_dbg(dev, cl, "not the last vtag after disconnect\n"); + mei_cl_flush_queues(cl, file); + goto out; + } + + mei_cl_flush_queues(cl, NULL); + cl_dbg(dev, cl, "removing\n"); + + mei_cl_unlink(cl); + kfree(cl); + +out: + file->private_data = NULL; + + mutex_unlock(&dev->device_lock); + return rets; +} + + +/** + * mei_read - the read function. + * + * @file: pointer to file structure + * @ubuf: pointer to user buffer + * @length: buffer length + * @offset: data offset in buffer + * + * Return: >=0 data length on success , <0 on error + */ +static ssize_t mei_read(struct file *file, char __user *ubuf, + size_t length, loff_t *offset) +{ + struct mei_cl *cl = file->private_data; + struct mei_device *dev; + struct mei_cl_cb *cb = NULL; + bool nonblock = !!(file->f_flags & O_NONBLOCK); + ssize_t rets; + + if (WARN_ON(!cl || !cl->dev)) + return -ENODEV; + + dev = cl->dev; + + + mutex_lock(&dev->device_lock); + if (dev->dev_state != MEI_DEV_ENABLED) { + rets = -ENODEV; + goto out; + } + + if (length == 0) { + rets = 0; + goto out; + } + + if (ubuf == NULL) { + rets = -EMSGSIZE; + goto out; + } + + cb = mei_cl_read_cb(cl, file); + if (cb) + goto copy_buffer; + + if (*offset > 0) + *offset = 0; + + rets = mei_cl_read_start(cl, length, file); + if (rets && rets != -EBUSY) { + cl_dbg(dev, cl, "mei start read failure status = %zd\n", rets); + goto out; + } + + if (nonblock) { + rets = -EAGAIN; + goto out; + } + + mutex_unlock(&dev->device_lock); + if (wait_event_interruptible(cl->rx_wait, + mei_cl_read_cb(cl, file) || + !mei_cl_is_connected(cl))) { + if (signal_pending(current)) + return -EINTR; + return -ERESTARTSYS; + } + mutex_lock(&dev->device_lock); + + if (!mei_cl_is_connected(cl)) { + rets = -ENODEV; + goto out; + } + + cb = mei_cl_read_cb(cl, file); + if (!cb) { + rets = 0; + goto out; + } + +copy_buffer: + /* now copy the data to user space */ + if (cb->status) { + rets = cb->status; + cl_dbg(dev, cl, "read operation failed %zd\n", rets); + goto free; + } + + cl_dbg(dev, cl, "buf.size = %zu buf.idx = %zu offset = %lld\n", + cb->buf.size, cb->buf_idx, *offset); + if (*offset >= cb->buf_idx) { + rets = 0; + goto free; + } + + /* length is being truncated to PAGE_SIZE, + * however buf_idx may point beyond that */ + length = min_t(size_t, length, cb->buf_idx - *offset); + + if (copy_to_user(ubuf, cb->buf.data + *offset, length)) { + dev_dbg(dev->dev, "failed to copy data to userland\n"); + rets = -EFAULT; + goto free; + } + + rets = length; + *offset += length; + /* not all data was read, keep the cb */ + if (*offset < cb->buf_idx) + goto out; + +free: + mei_cl_del_rd_completed(cl, cb); + *offset = 0; + +out: + cl_dbg(dev, cl, "end mei read rets = %zd\n", rets); + mutex_unlock(&dev->device_lock); + return rets; +} + +/** + * mei_cl_vtag_by_fp - obtain the vtag by file pointer + * + * @cl: host client + * @fp: pointer to file structure + * + * Return: vtag value on success, otherwise 0 + */ +static u8 mei_cl_vtag_by_fp(const struct mei_cl *cl, const struct file *fp) +{ + struct mei_cl_vtag *cl_vtag; + + if (!fp) + return 0; + + list_for_each_entry(cl_vtag, &cl->vtag_map, list) + if (cl_vtag->fp == fp) + return cl_vtag->vtag; + return 0; +} + +/** + * mei_write - the write function. + * + * @file: pointer to file structure + * @ubuf: pointer to user buffer + * @length: buffer length + * @offset: data offset in buffer + * + * Return: >=0 data length on success , <0 on error + */ +static ssize_t mei_write(struct file *file, const char __user *ubuf, + size_t length, loff_t *offset) +{ + struct mei_cl *cl = file->private_data; + struct mei_cl_cb *cb; + struct mei_device *dev; + ssize_t rets; + + if (WARN_ON(!cl || !cl->dev)) + return -ENODEV; + + dev = cl->dev; + + mutex_lock(&dev->device_lock); + + if (dev->dev_state != MEI_DEV_ENABLED) { + rets = -ENODEV; + goto out; + } + + if (!mei_cl_is_connected(cl)) { + cl_err(dev, cl, "is not connected"); + rets = -ENODEV; + goto out; + } + + if (!mei_me_cl_is_active(cl->me_cl)) { + rets = -ENOTTY; + goto out; + } + + if (length > mei_cl_mtu(cl)) { + rets = -EFBIG; + goto out; + } + + if (length == 0) { + rets = 0; + goto out; + } + + while (cl->tx_cb_queued >= dev->tx_queue_limit) { + if (file->f_flags & O_NONBLOCK) { + rets = -EAGAIN; + goto out; + } + mutex_unlock(&dev->device_lock); + rets = wait_event_interruptible(cl->tx_wait, + cl->writing_state == MEI_WRITE_COMPLETE || + (!mei_cl_is_connected(cl))); + mutex_lock(&dev->device_lock); + if (rets) { + if (signal_pending(current)) + rets = -EINTR; + goto out; + } + if (!mei_cl_is_connected(cl)) { + rets = -ENODEV; + goto out; + } + } + + cb = mei_cl_alloc_cb(cl, length, MEI_FOP_WRITE, file); + if (!cb) { + rets = -ENOMEM; + goto out; + } + cb->vtag = mei_cl_vtag_by_fp(cl, file); + + rets = copy_from_user(cb->buf.data, ubuf, length); + if (rets) { + dev_dbg(dev->dev, "failed to copy data from userland\n"); + rets = -EFAULT; + mei_io_cb_free(cb); + goto out; + } + + rets = mei_cl_write(cl, cb, MAX_SCHEDULE_TIMEOUT); +out: + mutex_unlock(&dev->device_lock); + return rets; +} + +/** + * mei_ioctl_connect_client - the connect to fw client IOCTL function + * + * @file: private data of the file object + * @in_client_uuid: requested UUID for connection + * @client: IOCTL connect data, output parameters + * + * Locking: called under "dev->device_lock" lock + * + * Return: 0 on success, <0 on failure. + */ +static int mei_ioctl_connect_client(struct file *file, + const uuid_le *in_client_uuid, + struct mei_client *client) +{ + struct mei_device *dev; + struct mei_me_client *me_cl; + struct mei_cl *cl; + int rets; + + cl = file->private_data; + dev = cl->dev; + + if (cl->state != MEI_FILE_INITIALIZING && + cl->state != MEI_FILE_DISCONNECTED) + return -EBUSY; + + /* find ME client we're trying to connect to */ + me_cl = mei_me_cl_by_uuid(dev, in_client_uuid); + if (!me_cl) { + dev_dbg(dev->dev, "Cannot connect to FW Client UUID = %pUl\n", + in_client_uuid); + rets = -ENOTTY; + goto end; + } + + if (me_cl->props.fixed_address) { + bool forbidden = dev->override_fixed_address ? + !dev->allow_fixed_address : !dev->hbm_f_fa_supported; + if (forbidden) { + dev_dbg(dev->dev, "Connection forbidden to FW Client UUID = %pUl\n", + in_client_uuid); + rets = -ENOTTY; + goto end; + } + } + + dev_dbg(dev->dev, "Connect to FW Client ID = %d\n", + me_cl->client_id); + dev_dbg(dev->dev, "FW Client - Protocol Version = %d\n", + me_cl->props.protocol_version); + dev_dbg(dev->dev, "FW Client - Max Msg Len = %d\n", + me_cl->props.max_msg_length); + + /* prepare the output buffer */ + client->max_msg_length = me_cl->props.max_msg_length; + client->protocol_version = me_cl->props.protocol_version; + dev_dbg(dev->dev, "Can connect?\n"); + + rets = mei_cl_connect(cl, me_cl, file); + +end: + mei_me_cl_put(me_cl); + return rets; +} + +/** + * mei_vt_support_check - check if client support vtags + * + * Locking: called under "dev->device_lock" lock + * + * @dev: mei_device + * @uuid: client UUID + * + * Return: + * 0 - supported + * -ENOTTY - no such client + * -EOPNOTSUPP - vtags are not supported by client + */ +static int mei_vt_support_check(struct mei_device *dev, const uuid_le *uuid) +{ + struct mei_me_client *me_cl; + int ret; + + if (!dev->hbm_f_vt_supported) + return -EOPNOTSUPP; + + me_cl = mei_me_cl_by_uuid(dev, uuid); + if (!me_cl) { + dev_dbg(dev->dev, "Cannot connect to FW Client UUID = %pUl\n", + uuid); + return -ENOTTY; + } + ret = me_cl->props.vt_supported ? 0 : -EOPNOTSUPP; + mei_me_cl_put(me_cl); + + return ret; +} + +/** + * mei_ioctl_connect_vtag - connect to fw client with vtag IOCTL function + * + * @file: private data of the file object + * @in_client_uuid: requested UUID for connection + * @client: IOCTL connect data, output parameters + * @vtag: vm tag + * + * Locking: called under "dev->device_lock" lock + * + * Return: 0 on success, <0 on failure. + */ +static int mei_ioctl_connect_vtag(struct file *file, + const uuid_le *in_client_uuid, + struct mei_client *client, + u8 vtag) +{ + struct mei_device *dev; + struct mei_cl *cl; + struct mei_cl *pos; + struct mei_cl_vtag *cl_vtag; + + cl = file->private_data; + dev = cl->dev; + + dev_dbg(dev->dev, "FW Client %pUl vtag %d\n", in_client_uuid, vtag); + + switch (cl->state) { + case MEI_FILE_DISCONNECTED: + if (mei_cl_vtag_by_fp(cl, file) != vtag) { + dev_err(dev->dev, "reconnect with different vtag\n"); + return -EINVAL; + } + break; + case MEI_FILE_INITIALIZING: + /* malicious connect from another thread may push vtag */ + if (!IS_ERR(mei_cl_fp_by_vtag(cl, vtag))) { + dev_err(dev->dev, "vtag already filled\n"); + return -EINVAL; + } + + list_for_each_entry(pos, &dev->file_list, link) { + if (pos == cl) + continue; + if (!pos->me_cl) + continue; + + /* only search for same UUID */ + if (uuid_le_cmp(*mei_cl_uuid(pos), *in_client_uuid)) + continue; + + /* if tag already exist try another fp */ + if (!IS_ERR(mei_cl_fp_by_vtag(pos, vtag))) + continue; + + /* replace cl with acquired one */ + dev_dbg(dev->dev, "replacing with existing cl\n"); + mei_cl_unlink(cl); + kfree(cl); + file->private_data = pos; + cl = pos; + break; + } + + cl_vtag = mei_cl_vtag_alloc(file, vtag); + if (IS_ERR(cl_vtag)) + return -ENOMEM; + + list_add_tail(&cl_vtag->list, &cl->vtag_map); + break; + default: + return -EBUSY; + } + + while (cl->state != MEI_FILE_INITIALIZING && + cl->state != MEI_FILE_DISCONNECTED && + cl->state != MEI_FILE_CONNECTED) { + mutex_unlock(&dev->device_lock); + wait_event_timeout(cl->wait, + (cl->state == MEI_FILE_CONNECTED || + cl->state == MEI_FILE_DISCONNECTED || + cl->state == MEI_FILE_DISCONNECT_REQUIRED || + cl->state == MEI_FILE_DISCONNECT_REPLY), + dev->timeouts.cl_connect); + mutex_lock(&dev->device_lock); + } + + if (!mei_cl_is_connected(cl)) + return mei_ioctl_connect_client(file, in_client_uuid, client); + + client->max_msg_length = cl->me_cl->props.max_msg_length; + client->protocol_version = cl->me_cl->props.protocol_version; + + return 0; +} + +/** + * mei_ioctl_client_notify_request - + * propagate event notification request to client + * + * @file: pointer to file structure + * @request: 0 - disable, 1 - enable + * + * Return: 0 on success , <0 on error + */ +static int mei_ioctl_client_notify_request(const struct file *file, u32 request) +{ + struct mei_cl *cl = file->private_data; + + if (request != MEI_HBM_NOTIFICATION_START && + request != MEI_HBM_NOTIFICATION_STOP) + return -EINVAL; + + return mei_cl_notify_request(cl, file, (u8)request); +} + +/** + * mei_ioctl_client_notify_get - wait for notification request + * + * @file: pointer to file structure + * @notify_get: 0 - disable, 1 - enable + * + * Return: 0 on success , <0 on error + */ +static int mei_ioctl_client_notify_get(const struct file *file, u32 *notify_get) +{ + struct mei_cl *cl = file->private_data; + bool notify_ev; + bool block = (file->f_flags & O_NONBLOCK) == 0; + int rets; + + rets = mei_cl_notify_get(cl, block, ¬ify_ev); + if (rets) + return rets; + + *notify_get = notify_ev ? 1 : 0; + return 0; +} + +/** + * mei_ioctl - the IOCTL function + * + * @file: pointer to file structure + * @cmd: ioctl command + * @data: pointer to mei message structure + * + * Return: 0 on success , <0 on error + */ +static long mei_ioctl(struct file *file, unsigned int cmd, unsigned long data) +{ + struct mei_device *dev; + struct mei_cl *cl = file->private_data; + struct mei_connect_client_data conn; + struct mei_connect_client_data_vtag conn_vtag; + const uuid_le *cl_uuid; + struct mei_client *props; + u8 vtag; + u32 notify_get, notify_req; + int rets; + + + if (WARN_ON(!cl || !cl->dev)) + return -ENODEV; + + dev = cl->dev; + + dev_dbg(dev->dev, "IOCTL cmd = 0x%x", cmd); + + mutex_lock(&dev->device_lock); + if (dev->dev_state != MEI_DEV_ENABLED) { + rets = -ENODEV; + goto out; + } + + switch (cmd) { + case IOCTL_MEI_CONNECT_CLIENT: + dev_dbg(dev->dev, ": IOCTL_MEI_CONNECT_CLIENT.\n"); + if (copy_from_user(&conn, (char __user *)data, sizeof(conn))) { + dev_dbg(dev->dev, "failed to copy data from userland\n"); + rets = -EFAULT; + goto out; + } + cl_uuid = &conn.in_client_uuid; + props = &conn.out_client_properties; + vtag = 0; + + rets = mei_vt_support_check(dev, cl_uuid); + if (rets == -ENOTTY) + goto out; + if (!rets) + rets = mei_ioctl_connect_vtag(file, cl_uuid, props, + vtag); + else + rets = mei_ioctl_connect_client(file, cl_uuid, props); + if (rets) + goto out; + + /* if all is ok, copying the data back to user. */ + if (copy_to_user((char __user *)data, &conn, sizeof(conn))) { + dev_dbg(dev->dev, "failed to copy data to userland\n"); + rets = -EFAULT; + goto out; + } + + break; + + case IOCTL_MEI_CONNECT_CLIENT_VTAG: + dev_dbg(dev->dev, "IOCTL_MEI_CONNECT_CLIENT_VTAG\n"); + if (copy_from_user(&conn_vtag, (char __user *)data, + sizeof(conn_vtag))) { + dev_dbg(dev->dev, "failed to copy data from userland\n"); + rets = -EFAULT; + goto out; + } + + cl_uuid = &conn_vtag.connect.in_client_uuid; + props = &conn_vtag.out_client_properties; + vtag = conn_vtag.connect.vtag; + + rets = mei_vt_support_check(dev, cl_uuid); + if (rets == -EOPNOTSUPP) + dev_dbg(dev->dev, "FW Client %pUl does not support vtags\n", + cl_uuid); + if (rets) + goto out; + + if (!vtag) { + dev_dbg(dev->dev, "vtag can't be zero\n"); + rets = -EINVAL; + goto out; + } + + rets = mei_ioctl_connect_vtag(file, cl_uuid, props, vtag); + if (rets) + goto out; + + /* if all is ok, copying the data back to user. */ + if (copy_to_user((char __user *)data, &conn_vtag, + sizeof(conn_vtag))) { + dev_dbg(dev->dev, "failed to copy data to userland\n"); + rets = -EFAULT; + goto out; + } + + break; + + case IOCTL_MEI_NOTIFY_SET: + dev_dbg(dev->dev, ": IOCTL_MEI_NOTIFY_SET.\n"); + if (copy_from_user(¬ify_req, + (char __user *)data, sizeof(notify_req))) { + dev_dbg(dev->dev, "failed to copy data from userland\n"); + rets = -EFAULT; + goto out; + } + rets = mei_ioctl_client_notify_request(file, notify_req); + break; + + case IOCTL_MEI_NOTIFY_GET: + dev_dbg(dev->dev, ": IOCTL_MEI_NOTIFY_GET.\n"); + rets = mei_ioctl_client_notify_get(file, ¬ify_get); + if (rets) + goto out; + + dev_dbg(dev->dev, "copy connect data to user\n"); + if (copy_to_user((char __user *)data, + ¬ify_get, sizeof(notify_get))) { + dev_dbg(dev->dev, "failed to copy data to userland\n"); + rets = -EFAULT; + goto out; + + } + break; + + default: + rets = -ENOIOCTLCMD; + } + +out: + mutex_unlock(&dev->device_lock); + return rets; +} + +/** + * mei_poll - the poll function + * + * @file: pointer to file structure + * @wait: pointer to poll_table structure + * + * Return: poll mask + */ +static __poll_t mei_poll(struct file *file, poll_table *wait) +{ + __poll_t req_events = poll_requested_events(wait); + struct mei_cl *cl = file->private_data; + struct mei_device *dev; + __poll_t mask = 0; + bool notify_en; + + if (WARN_ON(!cl || !cl->dev)) + return EPOLLERR; + + dev = cl->dev; + + mutex_lock(&dev->device_lock); + + notify_en = cl->notify_en && (req_events & EPOLLPRI); + + if (dev->dev_state != MEI_DEV_ENABLED || + !mei_cl_is_connected(cl)) { + mask = EPOLLERR; + goto out; + } + + if (notify_en) { + poll_wait(file, &cl->ev_wait, wait); + if (cl->notify_ev) + mask |= EPOLLPRI; + } + + if (req_events & (EPOLLIN | EPOLLRDNORM)) { + poll_wait(file, &cl->rx_wait, wait); + + if (mei_cl_read_cb(cl, file)) + mask |= EPOLLIN | EPOLLRDNORM; + else + mei_cl_read_start(cl, mei_cl_mtu(cl), file); + } + + if (req_events & (EPOLLOUT | EPOLLWRNORM)) { + poll_wait(file, &cl->tx_wait, wait); + if (cl->tx_cb_queued < dev->tx_queue_limit) + mask |= EPOLLOUT | EPOLLWRNORM; + } + +out: + mutex_unlock(&dev->device_lock); + return mask; +} + +/** + * mei_cl_is_write_queued - check if the client has pending writes. + * + * @cl: writing host client + * + * Return: true if client is writing, false otherwise. + */ +static bool mei_cl_is_write_queued(struct mei_cl *cl) +{ + struct mei_device *dev = cl->dev; + struct mei_cl_cb *cb; + + list_for_each_entry(cb, &dev->write_list, list) + if (cb->cl == cl) + return true; + list_for_each_entry(cb, &dev->write_waiting_list, list) + if (cb->cl == cl) + return true; + return false; +} + +/** + * mei_fsync - the fsync handler + * + * @fp: pointer to file structure + * @start: unused + * @end: unused + * @datasync: unused + * + * Return: 0 on success, -ENODEV if client is not connected + */ +static int mei_fsync(struct file *fp, loff_t start, loff_t end, int datasync) +{ + struct mei_cl *cl = fp->private_data; + struct mei_device *dev; + int rets; + + if (WARN_ON(!cl || !cl->dev)) + return -ENODEV; + + dev = cl->dev; + + mutex_lock(&dev->device_lock); + + if (dev->dev_state != MEI_DEV_ENABLED || !mei_cl_is_connected(cl)) { + rets = -ENODEV; + goto out; + } + + while (mei_cl_is_write_queued(cl)) { + mutex_unlock(&dev->device_lock); + rets = wait_event_interruptible(cl->tx_wait, + cl->writing_state == MEI_WRITE_COMPLETE || + !mei_cl_is_connected(cl)); + mutex_lock(&dev->device_lock); + if (rets) { + if (signal_pending(current)) + rets = -EINTR; + goto out; + } + if (!mei_cl_is_connected(cl)) { + rets = -ENODEV; + goto out; + } + } + rets = 0; +out: + mutex_unlock(&dev->device_lock); + return rets; +} + +/** + * mei_fasync - asynchronous io support + * + * @fd: file descriptor + * @file: pointer to file structure + * @band: band bitmap + * + * Return: negative on error, + * 0 if it did no changes, + * and positive a process was added or deleted + */ +static int mei_fasync(int fd, struct file *file, int band) +{ + + struct mei_cl *cl = file->private_data; + + if (!mei_cl_is_connected(cl)) + return -ENODEV; + + return fasync_helper(fd, file, band, &cl->ev_async); +} + +/** + * trc_show - mei device trc attribute show method + * + * @device: device pointer + * @attr: attribute pointer + * @buf: char out buffer + * + * Return: number of the bytes printed into buf or error + */ +static ssize_t trc_show(struct device *device, + struct device_attribute *attr, char *buf) +{ + struct mei_device *dev = dev_get_drvdata(device); + u32 trc; + int ret; + + ret = mei_trc_status(dev, &trc); + if (ret) + return ret; + return sprintf(buf, "%08X\n", trc); +} +static DEVICE_ATTR_RO(trc); + +/** + * fw_status_show - mei device fw_status attribute show method + * + * @device: device pointer + * @attr: attribute pointer + * @buf: char out buffer + * + * Return: number of the bytes printed into buf or error + */ +static ssize_t fw_status_show(struct device *device, + struct device_attribute *attr, char *buf) +{ + struct mei_device *dev = dev_get_drvdata(device); + struct mei_fw_status fw_status; + int err, i; + ssize_t cnt = 0; + + mutex_lock(&dev->device_lock); + err = mei_fw_status(dev, &fw_status); + mutex_unlock(&dev->device_lock); + if (err) { + dev_err(device, "read fw_status error = %d\n", err); + return err; + } + + for (i = 0; i < fw_status.count; i++) + cnt += scnprintf(buf + cnt, PAGE_SIZE - cnt, "%08X\n", + fw_status.status[i]); + return cnt; +} +static DEVICE_ATTR_RO(fw_status); + +/** + * hbm_ver_show - display HBM protocol version negotiated with FW + * + * @device: device pointer + * @attr: attribute pointer + * @buf: char out buffer + * + * Return: number of the bytes printed into buf or error + */ +static ssize_t hbm_ver_show(struct device *device, + struct device_attribute *attr, char *buf) +{ + struct mei_device *dev = dev_get_drvdata(device); + struct hbm_version ver; + + mutex_lock(&dev->device_lock); + ver = dev->version; + mutex_unlock(&dev->device_lock); + + return sprintf(buf, "%u.%u\n", ver.major_version, ver.minor_version); +} +static DEVICE_ATTR_RO(hbm_ver); + +/** + * hbm_ver_drv_show - display HBM protocol version advertised by driver + * + * @device: device pointer + * @attr: attribute pointer + * @buf: char out buffer + * + * Return: number of the bytes printed into buf or error + */ +static ssize_t hbm_ver_drv_show(struct device *device, + struct device_attribute *attr, char *buf) +{ + return sprintf(buf, "%u.%u\n", HBM_MAJOR_VERSION, HBM_MINOR_VERSION); +} +static DEVICE_ATTR_RO(hbm_ver_drv); + +static ssize_t tx_queue_limit_show(struct device *device, + struct device_attribute *attr, char *buf) +{ + struct mei_device *dev = dev_get_drvdata(device); + u8 size = 0; + + mutex_lock(&dev->device_lock); + size = dev->tx_queue_limit; + mutex_unlock(&dev->device_lock); + + return sysfs_emit(buf, "%u\n", size); +} + +static ssize_t tx_queue_limit_store(struct device *device, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct mei_device *dev = dev_get_drvdata(device); + u8 limit; + unsigned int inp; + int err; + + err = kstrtouint(buf, 10, &inp); + if (err) + return err; + if (inp > MEI_TX_QUEUE_LIMIT_MAX || inp < MEI_TX_QUEUE_LIMIT_MIN) + return -EINVAL; + limit = inp; + + mutex_lock(&dev->device_lock); + dev->tx_queue_limit = limit; + mutex_unlock(&dev->device_lock); + + return count; +} +static DEVICE_ATTR_RW(tx_queue_limit); + +/** + * fw_ver_show - display ME FW version + * + * @device: device pointer + * @attr: attribute pointer + * @buf: char out buffer + * + * Return: number of the bytes printed into buf or error + */ +static ssize_t fw_ver_show(struct device *device, + struct device_attribute *attr, char *buf) +{ + struct mei_device *dev = dev_get_drvdata(device); + struct mei_fw_version *ver; + ssize_t cnt = 0; + int i; + + ver = dev->fw_ver; + + for (i = 0; i < MEI_MAX_FW_VER_BLOCKS; i++) + cnt += scnprintf(buf + cnt, PAGE_SIZE - cnt, "%u:%u.%u.%u.%u\n", + ver[i].platform, ver[i].major, ver[i].minor, + ver[i].hotfix, ver[i].buildno); + return cnt; +} +static DEVICE_ATTR_RO(fw_ver); + +/** + * dev_state_show - display device state + * + * @device: device pointer + * @attr: attribute pointer + * @buf: char out buffer + * + * Return: number of the bytes printed into buf or error + */ +static ssize_t dev_state_show(struct device *device, + struct device_attribute *attr, char *buf) +{ + struct mei_device *dev = dev_get_drvdata(device); + enum mei_dev_state dev_state; + + mutex_lock(&dev->device_lock); + dev_state = dev->dev_state; + mutex_unlock(&dev->device_lock); + + return sprintf(buf, "%s", mei_dev_state_str(dev_state)); +} +static DEVICE_ATTR_RO(dev_state); + +/** + * mei_set_devstate: set to new device state and notify sysfs file. + * + * @dev: mei_device + * @state: new device state + */ +void mei_set_devstate(struct mei_device *dev, enum mei_dev_state state) +{ + struct device *clsdev; + + if (dev->dev_state == state) + return; + + dev->dev_state = state; + + clsdev = class_find_device_by_devt(&mei_class, dev->cdev.dev); + if (clsdev) { + sysfs_notify(&clsdev->kobj, NULL, "dev_state"); + put_device(clsdev); + } +} + +/** + * kind_show - display device kind + * + * @device: device pointer + * @attr: attribute pointer + * @buf: char out buffer + * + * Return: number of the bytes printed into buf or error + */ +static ssize_t kind_show(struct device *device, + struct device_attribute *attr, char *buf) +{ + struct mei_device *dev = dev_get_drvdata(device); + ssize_t ret; + + if (dev->kind) + ret = sprintf(buf, "%s\n", dev->kind); + else + ret = sprintf(buf, "%s\n", "mei"); + + return ret; +} +static DEVICE_ATTR_RO(kind); + +static struct attribute *mei_attrs[] = { + &dev_attr_fw_status.attr, + &dev_attr_hbm_ver.attr, + &dev_attr_hbm_ver_drv.attr, + &dev_attr_tx_queue_limit.attr, + &dev_attr_fw_ver.attr, + &dev_attr_dev_state.attr, + &dev_attr_trc.attr, + &dev_attr_kind.attr, + NULL +}; +ATTRIBUTE_GROUPS(mei); + +/* + * file operations structure will be used for mei char device. + */ +static const struct file_operations mei_fops = { + .owner = THIS_MODULE, + .read = mei_read, + .unlocked_ioctl = mei_ioctl, + .compat_ioctl = compat_ptr_ioctl, + .open = mei_open, + .release = mei_release, + .write = mei_write, + .poll = mei_poll, + .fsync = mei_fsync, + .fasync = mei_fasync, + .llseek = no_llseek +}; + +/** + * mei_minor_get - obtain next free device minor number + * + * @dev: device pointer + * + * Return: allocated minor, or -ENOSPC if no free minor left + */ +static int mei_minor_get(struct mei_device *dev) +{ + int ret; + + mutex_lock(&mei_minor_lock); + ret = idr_alloc(&mei_idr, dev, 0, MEI_MAX_DEVS, GFP_KERNEL); + if (ret >= 0) + dev->minor = ret; + else if (ret == -ENOSPC) + dev_err(dev->dev, "too many mei devices\n"); + + mutex_unlock(&mei_minor_lock); + return ret; +} + +/** + * mei_minor_free - mark device minor number as free + * + * @dev: device pointer + */ +static void mei_minor_free(struct mei_device *dev) +{ + mutex_lock(&mei_minor_lock); + idr_remove(&mei_idr, dev->minor); + mutex_unlock(&mei_minor_lock); +} + +int mei_register(struct mei_device *dev, struct device *parent) +{ + struct device *clsdev; /* class device */ + int ret, devno; + + ret = mei_minor_get(dev); + if (ret < 0) + return ret; + + /* Fill in the data structures */ + devno = MKDEV(MAJOR(mei_devt), dev->minor); + cdev_init(&dev->cdev, &mei_fops); + dev->cdev.owner = parent->driver->owner; + + /* Add the device */ + ret = cdev_add(&dev->cdev, devno, 1); + if (ret) { + dev_err(parent, "unable to add device %d:%d\n", + MAJOR(mei_devt), dev->minor); + goto err_dev_add; + } + + clsdev = device_create_with_groups(&mei_class, parent, devno, + dev, mei_groups, + "mei%d", dev->minor); + + if (IS_ERR(clsdev)) { + dev_err(parent, "unable to create device %d:%d\n", + MAJOR(mei_devt), dev->minor); + ret = PTR_ERR(clsdev); + goto err_dev_create; + } + + mei_dbgfs_register(dev, dev_name(clsdev)); + + return 0; + +err_dev_create: + cdev_del(&dev->cdev); +err_dev_add: + mei_minor_free(dev); + return ret; +} +EXPORT_SYMBOL_GPL(mei_register); + +void mei_deregister(struct mei_device *dev) +{ + int devno; + + devno = dev->cdev.dev; + cdev_del(&dev->cdev); + + mei_dbgfs_deregister(dev); + + device_destroy(&mei_class, devno); + + mei_minor_free(dev); +} +EXPORT_SYMBOL_GPL(mei_deregister); + +static int __init mei_init(void) +{ + int ret; + + ret = class_register(&mei_class); + if (ret) + return ret; + + ret = alloc_chrdev_region(&mei_devt, 0, MEI_MAX_DEVS, "mei"); + if (ret < 0) { + pr_err("unable to allocate char dev region\n"); + goto err_class; + } + + ret = mei_cl_bus_init(); + if (ret < 0) { + pr_err("unable to initialize bus\n"); + goto err_chrdev; + } + + return 0; + +err_chrdev: + unregister_chrdev_region(mei_devt, MEI_MAX_DEVS); +err_class: + class_unregister(&mei_class); + return ret; +} + +static void __exit mei_exit(void) +{ + unregister_chrdev_region(mei_devt, MEI_MAX_DEVS); + class_unregister(&mei_class); + mei_cl_bus_exit(); +} + +module_init(mei_init); +module_exit(mei_exit); + +MODULE_AUTHOR("Intel Corporation"); +MODULE_DESCRIPTION("Intel(R) Management Engine Interface"); +MODULE_LICENSE("GPL v2"); + diff --git a/drivers/misc/mei/mei-trace.c b/drivers/misc/mei/mei-trace.c new file mode 100644 index 0000000000..48d4c4fcef --- /dev/null +++ b/drivers/misc/mei/mei-trace.c @@ -0,0 +1,16 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2015-2016, Intel Corporation. All rights reserved. + * Intel Management Engine Interface (Intel MEI) Linux driver + */ +#include <linux/module.h> + +/* sparse doesn't like tracepoint macros */ +#ifndef __CHECKER__ +#define CREATE_TRACE_POINTS +#include "mei-trace.h" + +EXPORT_TRACEPOINT_SYMBOL(mei_reg_read); +EXPORT_TRACEPOINT_SYMBOL(mei_reg_write); +EXPORT_TRACEPOINT_SYMBOL(mei_pci_cfg_read); +#endif /* __CHECKER__ */ diff --git a/drivers/misc/mei/mei-trace.h b/drivers/misc/mei/mei-trace.h new file mode 100644 index 0000000000..fe46ff2b9d --- /dev/null +++ b/drivers/misc/mei/mei-trace.h @@ -0,0 +1,83 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (c) 2015-2016, Intel Corporation. All rights reserved. + * Intel Management Engine Interface (Intel MEI) Linux driver + */ + +#if !defined(_MEI_TRACE_H_) || defined(TRACE_HEADER_MULTI_READ) +#define _MEI_TRACE_H_ + +#include <linux/stringify.h> +#include <linux/types.h> +#include <linux/tracepoint.h> + +#include <linux/device.h> + +#undef TRACE_SYSTEM +#define TRACE_SYSTEM mei + +TRACE_EVENT(mei_reg_read, + TP_PROTO(const struct device *dev, const char *reg, u32 offs, u32 val), + TP_ARGS(dev, reg, offs, val), + TP_STRUCT__entry( + __string(dev, dev_name(dev)) + __field(const char *, reg) + __field(u32, offs) + __field(u32, val) + ), + TP_fast_assign( + __assign_str(dev, dev_name(dev)); + __entry->reg = reg; + __entry->offs = offs; + __entry->val = val; + ), + TP_printk("[%s] read %s:[%#x] = %#x", + __get_str(dev), __entry->reg, __entry->offs, __entry->val) +); + +TRACE_EVENT(mei_reg_write, + TP_PROTO(const struct device *dev, const char *reg, u32 offs, u32 val), + TP_ARGS(dev, reg, offs, val), + TP_STRUCT__entry( + __string(dev, dev_name(dev)) + __field(const char *, reg) + __field(u32, offs) + __field(u32, val) + ), + TP_fast_assign( + __assign_str(dev, dev_name(dev)); + __entry->reg = reg; + __entry->offs = offs; + __entry->val = val; + ), + TP_printk("[%s] write %s[%#x] = %#x", + __get_str(dev), __entry->reg, __entry->offs, __entry->val) +); + +TRACE_EVENT(mei_pci_cfg_read, + TP_PROTO(const struct device *dev, const char *reg, u32 offs, u32 val), + TP_ARGS(dev, reg, offs, val), + TP_STRUCT__entry( + __string(dev, dev_name(dev)) + __field(const char *, reg) + __field(u32, offs) + __field(u32, val) + ), + TP_fast_assign( + __assign_str(dev, dev_name(dev)); + __entry->reg = reg; + __entry->offs = offs; + __entry->val = val; + ), + TP_printk("[%s] pci cfg read %s:[%#x] = %#x", + __get_str(dev), __entry->reg, __entry->offs, __entry->val) +); + +#endif /* _MEI_TRACE_H_ */ + +/* This part must be outside protection */ +#undef TRACE_INCLUDE_PATH +#undef TRACE_INCLUDE_FILE +#define TRACE_INCLUDE_PATH . +#define TRACE_INCLUDE_FILE mei-trace +#include <trace/define_trace.h> diff --git a/drivers/misc/mei/mei_dev.h b/drivers/misc/mei/mei_dev.h new file mode 100644 index 0000000000..cdf8a2edf0 --- /dev/null +++ b/drivers/misc/mei/mei_dev.h @@ -0,0 +1,878 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (c) 2003-2022, Intel Corporation. All rights reserved. + * Intel Management Engine Interface (Intel MEI) Linux driver + */ + +#ifndef _MEI_DEV_H_ +#define _MEI_DEV_H_ + +#include <linux/types.h> +#include <linux/cdev.h> +#include <linux/poll.h> +#include <linux/mei.h> +#include <linux/mei_cl_bus.h> + +static inline int uuid_le_cmp(const uuid_le u1, const uuid_le u2) +{ + return memcmp(&u1, &u2, sizeof(uuid_le)); +} + +#include "hw.h" +#include "hbm.h" + +#define MEI_SLOT_SIZE sizeof(u32) +#define MEI_RD_MSG_BUF_SIZE (128 * MEI_SLOT_SIZE) + +/* + * Number of Maximum MEI Clients + */ +#define MEI_CLIENTS_MAX 256 + +/* + * maximum number of consecutive resets + */ +#define MEI_MAX_CONSEC_RESET 3 + +/* + * Number of File descriptors/handles + * that can be opened to the driver. + * + * Limit to 255: 256 Total Clients + * minus internal client for MEI Bus Messages + */ +#define MEI_MAX_OPEN_HANDLE_COUNT (MEI_CLIENTS_MAX - 1) + +/* File state */ +enum file_state { + MEI_FILE_UNINITIALIZED = 0, + MEI_FILE_INITIALIZING, + MEI_FILE_CONNECTING, + MEI_FILE_CONNECTED, + MEI_FILE_DISCONNECTING, + MEI_FILE_DISCONNECT_REPLY, + MEI_FILE_DISCONNECT_REQUIRED, + MEI_FILE_DISCONNECTED, +}; + +/* MEI device states */ +enum mei_dev_state { + MEI_DEV_INITIALIZING = 0, + MEI_DEV_INIT_CLIENTS, + MEI_DEV_ENABLED, + MEI_DEV_RESETTING, + MEI_DEV_DISABLED, + MEI_DEV_POWERING_DOWN, + MEI_DEV_POWER_DOWN, + MEI_DEV_POWER_UP +}; + +/** + * enum mei_dev_pxp_mode - MEI PXP mode state + * + * @MEI_DEV_PXP_DEFAULT: PCH based device, no initailization required + * @MEI_DEV_PXP_INIT: device requires initialization, send setup message to firmware + * @MEI_DEV_PXP_SETUP: device is in setup stage, waiting for firmware repsonse + * @MEI_DEV_PXP_READY: device initialized + */ +enum mei_dev_pxp_mode { + MEI_DEV_PXP_DEFAULT = 0, + MEI_DEV_PXP_INIT = 1, + MEI_DEV_PXP_SETUP = 2, + MEI_DEV_PXP_READY = 3, +}; + +const char *mei_dev_state_str(int state); + +enum mei_file_transaction_states { + MEI_IDLE, + MEI_WRITING, + MEI_WRITE_COMPLETE, +}; + +/** + * enum mei_cb_file_ops - file operation associated with the callback + * @MEI_FOP_READ: read + * @MEI_FOP_WRITE: write + * @MEI_FOP_CONNECT: connect + * @MEI_FOP_DISCONNECT: disconnect + * @MEI_FOP_DISCONNECT_RSP: disconnect response + * @MEI_FOP_NOTIFY_START: start notification + * @MEI_FOP_NOTIFY_STOP: stop notification + * @MEI_FOP_DMA_MAP: request client dma map + * @MEI_FOP_DMA_UNMAP: request client dma unmap + */ +enum mei_cb_file_ops { + MEI_FOP_READ = 0, + MEI_FOP_WRITE, + MEI_FOP_CONNECT, + MEI_FOP_DISCONNECT, + MEI_FOP_DISCONNECT_RSP, + MEI_FOP_NOTIFY_START, + MEI_FOP_NOTIFY_STOP, + MEI_FOP_DMA_MAP, + MEI_FOP_DMA_UNMAP, +}; + +/** + * enum mei_cl_io_mode - io mode between driver and fw + * + * @MEI_CL_IO_TX_BLOCKING: send is blocking + * @MEI_CL_IO_TX_INTERNAL: internal communication between driver and FW + * + * @MEI_CL_IO_RX_NONBLOCK: recv is non-blocking + * + * @MEI_CL_IO_SGL: send command with sgl list. + */ +enum mei_cl_io_mode { + MEI_CL_IO_TX_BLOCKING = BIT(0), + MEI_CL_IO_TX_INTERNAL = BIT(1), + + MEI_CL_IO_RX_NONBLOCK = BIT(2), + + MEI_CL_IO_SGL = BIT(3), +}; + +/* + * Intel MEI message data struct + */ +struct mei_msg_data { + size_t size; + unsigned char *data; +}; + +struct mei_dma_data { + u8 buffer_id; + void *vaddr; + dma_addr_t daddr; + size_t size; +}; + +/** + * struct mei_dma_dscr - dma address descriptor + * + * @vaddr: dma buffer virtual address + * @daddr: dma buffer physical address + * @size : dma buffer size + */ +struct mei_dma_dscr { + void *vaddr; + dma_addr_t daddr; + size_t size; +}; + +/* Maximum number of processed FW status registers */ +#define MEI_FW_STATUS_MAX 6 +/* Minimal buffer for FW status string (8 bytes in dw + space or '\0') */ +#define MEI_FW_STATUS_STR_SZ (MEI_FW_STATUS_MAX * (8 + 1)) + + +/* + * struct mei_fw_status - storage of FW status data + * + * @count: number of actually available elements in array + * @status: FW status registers + */ +struct mei_fw_status { + int count; + u32 status[MEI_FW_STATUS_MAX]; +}; + +/** + * struct mei_me_client - representation of me (fw) client + * + * @list: link in me client list + * @refcnt: struct reference count + * @props: client properties + * @client_id: me client id + * @tx_flow_ctrl_creds: flow control credits + * @connect_count: number connections to this client + * @bus_added: added to bus + */ +struct mei_me_client { + struct list_head list; + struct kref refcnt; + struct mei_client_properties props; + u8 client_id; + u8 tx_flow_ctrl_creds; + u8 connect_count; + u8 bus_added; +}; + + +struct mei_cl; + +/** + * struct mei_cl_cb - file operation callback structure + * + * @list: link in callback queue + * @cl: file client who is running this operation + * @fop_type: file operation type + * @buf: buffer for data associated with the callback + * @buf_idx: last read index + * @vtag: virtual tag + * @fp: pointer to file structure + * @status: io status of the cb + * @internal: communication between driver and FW flag + * @blocking: transmission blocking mode + * @ext_hdr: extended header + */ +struct mei_cl_cb { + struct list_head list; + struct mei_cl *cl; + enum mei_cb_file_ops fop_type; + struct mei_msg_data buf; + size_t buf_idx; + u8 vtag; + const struct file *fp; + int status; + u32 internal:1; + u32 blocking:1; + struct mei_ext_hdr *ext_hdr; +}; + +/** + * struct mei_cl_vtag - file pointer to vtag mapping structure + * + * @list: link in map queue + * @fp: file pointer + * @vtag: corresponding vtag + * @pending_read: the read is pending on this file + */ +struct mei_cl_vtag { + struct list_head list; + const struct file *fp; + u8 vtag; + u8 pending_read:1; +}; + +/** + * struct mei_cl - me client host representation + * carried in file->private_data + * + * @link: link in the clients list + * @dev: mei parent device + * @state: file operation state + * @tx_wait: wait queue for tx completion + * @rx_wait: wait queue for rx completion + * @wait: wait queue for management operation + * @ev_wait: notification wait queue + * @ev_async: event async notification + * @status: connection status + * @me_cl: fw client connected + * @fp: file associated with client + * @host_client_id: host id + * @vtag_map: vtag map + * @tx_flow_ctrl_creds: transmit flow credentials + * @rx_flow_ctrl_creds: receive flow credentials + * @timer_count: watchdog timer for operation completion + * @notify_en: notification - enabled/disabled + * @notify_ev: pending notification event + * @tx_cb_queued: number of tx callbacks in queue + * @writing_state: state of the tx + * @rd_pending: pending read credits + * @rd_completed_lock: protects rd_completed queue + * @rd_completed: completed read + * @dma: dma settings + * @dma_mapped: dma buffer is currently mapped. + * + * @cldev: device on the mei client bus + */ +struct mei_cl { + struct list_head link; + struct mei_device *dev; + enum file_state state; + wait_queue_head_t tx_wait; + wait_queue_head_t rx_wait; + wait_queue_head_t wait; + wait_queue_head_t ev_wait; + struct fasync_struct *ev_async; + int status; + struct mei_me_client *me_cl; + const struct file *fp; + u8 host_client_id; + struct list_head vtag_map; + u8 tx_flow_ctrl_creds; + u8 rx_flow_ctrl_creds; + u8 timer_count; + u8 notify_en; + u8 notify_ev; + u8 tx_cb_queued; + enum mei_file_transaction_states writing_state; + struct list_head rd_pending; + spinlock_t rd_completed_lock; /* protects rd_completed queue */ + struct list_head rd_completed; + struct mei_dma_data dma; + u8 dma_mapped; + + struct mei_cl_device *cldev; +}; + +#define MEI_TX_QUEUE_LIMIT_DEFAULT 50 +#define MEI_TX_QUEUE_LIMIT_MAX 255 +#define MEI_TX_QUEUE_LIMIT_MIN 30 + +/** + * struct mei_hw_ops - hw specific ops + * + * @host_is_ready : query for host readiness + * + * @hw_is_ready : query if hw is ready + * @hw_reset : reset hw + * @hw_start : start hw after reset + * @hw_config : configure hw + * + * @fw_status : get fw status registers + * @trc_status : get trc status register + * @pg_state : power gating state of the device + * @pg_in_transition : is device now in pg transition + * @pg_is_enabled : is power gating enabled + * + * @intr_clear : clear pending interrupts + * @intr_enable : enable interrupts + * @intr_disable : disable interrupts + * @synchronize_irq : synchronize irqs + * + * @hbuf_free_slots : query for write buffer empty slots + * @hbuf_is_ready : query if write buffer is empty + * @hbuf_depth : query for write buffer depth + * + * @write : write a message to FW + * + * @rdbuf_full_slots : query how many slots are filled + * + * @read_hdr : get first 4 bytes (header) + * @read : read a buffer from the FW + */ +struct mei_hw_ops { + + bool (*host_is_ready)(struct mei_device *dev); + + bool (*hw_is_ready)(struct mei_device *dev); + int (*hw_reset)(struct mei_device *dev, bool enable); + int (*hw_start)(struct mei_device *dev); + int (*hw_config)(struct mei_device *dev); + + int (*fw_status)(struct mei_device *dev, struct mei_fw_status *fw_sts); + int (*trc_status)(struct mei_device *dev, u32 *trc); + + enum mei_pg_state (*pg_state)(struct mei_device *dev); + bool (*pg_in_transition)(struct mei_device *dev); + bool (*pg_is_enabled)(struct mei_device *dev); + + void (*intr_clear)(struct mei_device *dev); + void (*intr_enable)(struct mei_device *dev); + void (*intr_disable)(struct mei_device *dev); + void (*synchronize_irq)(struct mei_device *dev); + + int (*hbuf_free_slots)(struct mei_device *dev); + bool (*hbuf_is_ready)(struct mei_device *dev); + u32 (*hbuf_depth)(const struct mei_device *dev); + int (*write)(struct mei_device *dev, + const void *hdr, size_t hdr_len, + const void *data, size_t data_len); + + int (*rdbuf_full_slots)(struct mei_device *dev); + + u32 (*read_hdr)(const struct mei_device *dev); + int (*read)(struct mei_device *dev, + unsigned char *buf, unsigned long len); +}; + +/* MEI bus API*/ +void mei_cl_bus_rescan_work(struct work_struct *work); +void mei_cl_bus_dev_fixup(struct mei_cl_device *dev); +ssize_t __mei_cl_send(struct mei_cl *cl, const u8 *buf, size_t length, u8 vtag, + unsigned int mode); +ssize_t __mei_cl_send_timeout(struct mei_cl *cl, const u8 *buf, size_t length, u8 vtag, + unsigned int mode, unsigned long timeout); +ssize_t __mei_cl_recv(struct mei_cl *cl, u8 *buf, size_t length, u8 *vtag, + unsigned int mode, unsigned long timeout); +bool mei_cl_bus_rx_event(struct mei_cl *cl); +bool mei_cl_bus_notify_event(struct mei_cl *cl); +void mei_cl_bus_remove_devices(struct mei_device *bus); +int mei_cl_bus_init(void); +void mei_cl_bus_exit(void); + +/** + * enum mei_pg_event - power gating transition events + * + * @MEI_PG_EVENT_IDLE: the driver is not in power gating transition + * @MEI_PG_EVENT_WAIT: the driver is waiting for a pg event to complete + * @MEI_PG_EVENT_RECEIVED: the driver received pg event + * @MEI_PG_EVENT_INTR_WAIT: the driver is waiting for a pg event interrupt + * @MEI_PG_EVENT_INTR_RECEIVED: the driver received pg event interrupt + */ +enum mei_pg_event { + MEI_PG_EVENT_IDLE, + MEI_PG_EVENT_WAIT, + MEI_PG_EVENT_RECEIVED, + MEI_PG_EVENT_INTR_WAIT, + MEI_PG_EVENT_INTR_RECEIVED, +}; + +/** + * enum mei_pg_state - device internal power gating state + * + * @MEI_PG_OFF: device is not power gated - it is active + * @MEI_PG_ON: device is power gated - it is in lower power state + */ +enum mei_pg_state { + MEI_PG_OFF = 0, + MEI_PG_ON = 1, +}; + +const char *mei_pg_state_str(enum mei_pg_state state); + +/** + * struct mei_fw_version - MEI FW version struct + * + * @platform: platform identifier + * @major: major version field + * @minor: minor version field + * @buildno: build number version field + * @hotfix: hotfix number version field + */ +struct mei_fw_version { + u8 platform; + u8 major; + u16 minor; + u16 buildno; + u16 hotfix; +}; + +#define MEI_MAX_FW_VER_BLOCKS 3 + +struct mei_dev_timeouts { + unsigned long hw_ready; /* Timeout on ready message, in jiffies */ + int connect; /* HPS: at least 2 seconds, in seconds */ + unsigned long cl_connect; /* HPS: Client Connect Timeout, in jiffies */ + int client_init; /* HPS: Clients Enumeration Timeout, in seconds */ + unsigned long pgi; /* PG Isolation time response, in jiffies */ + unsigned int d0i3; /* D0i3 set/unset max response time, in jiffies */ + unsigned long hbm; /* HBM operation timeout, in jiffies */ + unsigned long mkhi_recv; /* receive timeout, in jiffies */ +}; + +/** + * struct mei_device - MEI private device struct + * + * @dev : device on a bus + * @cdev : character device + * @minor : minor number allocated for device + * + * @write_list : write pending list + * @write_waiting_list : write completion list + * @ctrl_wr_list : pending control write list + * @ctrl_rd_list : pending control read list + * @tx_queue_limit: tx queues per client linit + * + * @file_list : list of opened handles + * @open_handle_count: number of opened handles + * + * @device_lock : big device lock + * @timer_work : MEI timer delayed work (timeouts) + * + * @recvd_hw_ready : hw ready message received flag + * + * @wait_hw_ready : wait queue for receive HW ready message form FW + * @wait_pg : wait queue for receive PG message from FW + * @wait_hbm_start : wait queue for receive HBM start message from FW + * + * @reset_count : number of consecutive resets + * @dev_state : device state + * @hbm_state : state of host bus message protocol + * @pxp_mode : PXP device mode + * @init_clients_timer : HBM init handshake timeout + * + * @pg_event : power gating event + * @pg_domain : runtime PM domain + * + * @rd_msg_buf : control messages buffer + * @rd_msg_hdr : read message header storage + * @rd_msg_hdr_count : how many dwords were already read from header + * + * @hbuf_is_ready : query if the host host/write buffer is ready + * @dr_dscr: DMA ring descriptors: TX, RX, and CTRL + * + * @version : HBM protocol version in use + * @hbm_f_pg_supported : hbm feature pgi protocol + * @hbm_f_dc_supported : hbm feature dynamic clients + * @hbm_f_dot_supported : hbm feature disconnect on timeout + * @hbm_f_ev_supported : hbm feature event notification + * @hbm_f_fa_supported : hbm feature fixed address client + * @hbm_f_ie_supported : hbm feature immediate reply to enum request + * @hbm_f_os_supported : hbm feature support OS ver message + * @hbm_f_dr_supported : hbm feature dma ring supported + * @hbm_f_vt_supported : hbm feature vtag supported + * @hbm_f_cap_supported : hbm feature capabilities message supported + * @hbm_f_cd_supported : hbm feature client dma supported + * @hbm_f_gsc_supported : hbm feature gsc supported + * + * @fw_ver : FW versions + * + * @fw_f_fw_ver_supported : fw feature: fw version supported + * @fw_ver_received : fw version received + * + * @me_clients_rwsem: rw lock over me_clients list + * @me_clients : list of FW clients + * @me_clients_map : FW clients bit map + * @host_clients_map : host clients id pool + * + * @allow_fixed_address: allow user space to connect a fixed client + * @override_fixed_address: force allow fixed address behavior + * + * @timeouts: actual timeout values + * + * @reset_work : work item for the device reset + * @bus_rescan_work : work item for the bus rescan + * + * @device_list : mei client bus list + * @cl_bus_lock : client bus list lock + * + * @kind : kind of mei device + * + * @dbgfs_dir : debugfs mei root directory + * + * @ops: : hw specific operations + * @hw : hw specific data + */ +struct mei_device { + struct device *dev; + struct cdev cdev; + int minor; + + struct list_head write_list; + struct list_head write_waiting_list; + struct list_head ctrl_wr_list; + struct list_head ctrl_rd_list; + u8 tx_queue_limit; + + struct list_head file_list; + long open_handle_count; + + struct mutex device_lock; + struct delayed_work timer_work; + + bool recvd_hw_ready; + /* + * waiting queue for receive message from FW + */ + wait_queue_head_t wait_hw_ready; + wait_queue_head_t wait_pg; + wait_queue_head_t wait_hbm_start; + + /* + * mei device states + */ + unsigned long reset_count; + enum mei_dev_state dev_state; + enum mei_hbm_state hbm_state; + enum mei_dev_pxp_mode pxp_mode; + u16 init_clients_timer; + + /* + * Power Gating support + */ + enum mei_pg_event pg_event; +#ifdef CONFIG_PM + struct dev_pm_domain pg_domain; +#endif /* CONFIG_PM */ + + unsigned char rd_msg_buf[MEI_RD_MSG_BUF_SIZE]; + u32 rd_msg_hdr[MEI_RD_MSG_BUF_SIZE]; + int rd_msg_hdr_count; + + /* write buffer */ + bool hbuf_is_ready; + + struct mei_dma_dscr dr_dscr[DMA_DSCR_NUM]; + + struct hbm_version version; + unsigned int hbm_f_pg_supported:1; + unsigned int hbm_f_dc_supported:1; + unsigned int hbm_f_dot_supported:1; + unsigned int hbm_f_ev_supported:1; + unsigned int hbm_f_fa_supported:1; + unsigned int hbm_f_ie_supported:1; + unsigned int hbm_f_os_supported:1; + unsigned int hbm_f_dr_supported:1; + unsigned int hbm_f_vt_supported:1; + unsigned int hbm_f_cap_supported:1; + unsigned int hbm_f_cd_supported:1; + unsigned int hbm_f_gsc_supported:1; + + struct mei_fw_version fw_ver[MEI_MAX_FW_VER_BLOCKS]; + + unsigned int fw_f_fw_ver_supported:1; + unsigned int fw_ver_received:1; + + struct rw_semaphore me_clients_rwsem; + struct list_head me_clients; + DECLARE_BITMAP(me_clients_map, MEI_CLIENTS_MAX); + DECLARE_BITMAP(host_clients_map, MEI_CLIENTS_MAX); + + bool allow_fixed_address; + bool override_fixed_address; + + struct mei_dev_timeouts timeouts; + + struct work_struct reset_work; + struct work_struct bus_rescan_work; + + /* List of bus devices */ + struct list_head device_list; + struct mutex cl_bus_lock; + + const char *kind; + +#if IS_ENABLED(CONFIG_DEBUG_FS) + struct dentry *dbgfs_dir; +#endif /* CONFIG_DEBUG_FS */ + + const struct mei_hw_ops *ops; + char hw[] __aligned(sizeof(void *)); +}; + +static inline unsigned long mei_secs_to_jiffies(unsigned long sec) +{ + return msecs_to_jiffies(sec * MSEC_PER_SEC); +} + +/** + * mei_data2slots - get slots number from a message length + * + * @length: size of the messages in bytes + * + * Return: number of slots + */ +static inline u32 mei_data2slots(size_t length) +{ + return DIV_ROUND_UP(length, MEI_SLOT_SIZE); +} + +/** + * mei_hbm2slots - get slots number from a hbm message length + * length + size of the mei message header + * + * @length: size of the messages in bytes + * + * Return: number of slots + */ +static inline u32 mei_hbm2slots(size_t length) +{ + return DIV_ROUND_UP(sizeof(struct mei_msg_hdr) + length, MEI_SLOT_SIZE); +} + +/** + * mei_slots2data - get data in slots - bytes from slots + * + * @slots: number of available slots + * + * Return: number of bytes in slots + */ +static inline u32 mei_slots2data(int slots) +{ + return slots * MEI_SLOT_SIZE; +} + +/* + * mei init function prototypes + */ +void mei_device_init(struct mei_device *dev, + struct device *device, + bool slow_fw, + const struct mei_hw_ops *hw_ops); +int mei_reset(struct mei_device *dev); +int mei_start(struct mei_device *dev); +int mei_restart(struct mei_device *dev); +void mei_stop(struct mei_device *dev); +void mei_cancel_work(struct mei_device *dev); + +void mei_set_devstate(struct mei_device *dev, enum mei_dev_state state); + +int mei_dmam_ring_alloc(struct mei_device *dev); +void mei_dmam_ring_free(struct mei_device *dev); +bool mei_dma_ring_is_allocated(struct mei_device *dev); +void mei_dma_ring_reset(struct mei_device *dev); +void mei_dma_ring_read(struct mei_device *dev, unsigned char *buf, u32 len); +void mei_dma_ring_write(struct mei_device *dev, unsigned char *buf, u32 len); +u32 mei_dma_ring_empty_slots(struct mei_device *dev); + +/* + * MEI interrupt functions prototype + */ + +void mei_timer(struct work_struct *work); +void mei_schedule_stall_timer(struct mei_device *dev); +int mei_irq_read_handler(struct mei_device *dev, + struct list_head *cmpl_list, s32 *slots); + +int mei_irq_write_handler(struct mei_device *dev, struct list_head *cmpl_list); +void mei_irq_compl_handler(struct mei_device *dev, struct list_head *cmpl_list); + +/* + * Register Access Function + */ + + +static inline int mei_hw_config(struct mei_device *dev) +{ + return dev->ops->hw_config(dev); +} + +static inline enum mei_pg_state mei_pg_state(struct mei_device *dev) +{ + return dev->ops->pg_state(dev); +} + +static inline bool mei_pg_in_transition(struct mei_device *dev) +{ + return dev->ops->pg_in_transition(dev); +} + +static inline bool mei_pg_is_enabled(struct mei_device *dev) +{ + return dev->ops->pg_is_enabled(dev); +} + +static inline int mei_hw_reset(struct mei_device *dev, bool enable) +{ + return dev->ops->hw_reset(dev, enable); +} + +static inline int mei_hw_start(struct mei_device *dev) +{ + return dev->ops->hw_start(dev); +} + +static inline void mei_clear_interrupts(struct mei_device *dev) +{ + dev->ops->intr_clear(dev); +} + +static inline void mei_enable_interrupts(struct mei_device *dev) +{ + dev->ops->intr_enable(dev); +} + +static inline void mei_disable_interrupts(struct mei_device *dev) +{ + dev->ops->intr_disable(dev); +} + +static inline void mei_synchronize_irq(struct mei_device *dev) +{ + dev->ops->synchronize_irq(dev); +} + +static inline bool mei_host_is_ready(struct mei_device *dev) +{ + return dev->ops->host_is_ready(dev); +} +static inline bool mei_hw_is_ready(struct mei_device *dev) +{ + return dev->ops->hw_is_ready(dev); +} + +static inline bool mei_hbuf_is_ready(struct mei_device *dev) +{ + return dev->ops->hbuf_is_ready(dev); +} + +static inline int mei_hbuf_empty_slots(struct mei_device *dev) +{ + return dev->ops->hbuf_free_slots(dev); +} + +static inline u32 mei_hbuf_depth(const struct mei_device *dev) +{ + return dev->ops->hbuf_depth(dev); +} + +static inline int mei_write_message(struct mei_device *dev, + const void *hdr, size_t hdr_len, + const void *data, size_t data_len) +{ + return dev->ops->write(dev, hdr, hdr_len, data, data_len); +} + +static inline u32 mei_read_hdr(const struct mei_device *dev) +{ + return dev->ops->read_hdr(dev); +} + +static inline void mei_read_slots(struct mei_device *dev, + unsigned char *buf, unsigned long len) +{ + dev->ops->read(dev, buf, len); +} + +static inline int mei_count_full_read_slots(struct mei_device *dev) +{ + return dev->ops->rdbuf_full_slots(dev); +} + +static inline int mei_trc_status(struct mei_device *dev, u32 *trc) +{ + if (dev->ops->trc_status) + return dev->ops->trc_status(dev, trc); + return -EOPNOTSUPP; +} + +static inline int mei_fw_status(struct mei_device *dev, + struct mei_fw_status *fw_status) +{ + return dev->ops->fw_status(dev, fw_status); +} + +bool mei_hbuf_acquire(struct mei_device *dev); + +bool mei_write_is_idle(struct mei_device *dev); + +#if IS_ENABLED(CONFIG_DEBUG_FS) +void mei_dbgfs_register(struct mei_device *dev, const char *name); +void mei_dbgfs_deregister(struct mei_device *dev); +#else +static inline void mei_dbgfs_register(struct mei_device *dev, const char *name) {} +static inline void mei_dbgfs_deregister(struct mei_device *dev) {} +#endif /* CONFIG_DEBUG_FS */ + +int mei_register(struct mei_device *dev, struct device *parent); +void mei_deregister(struct mei_device *dev); + +#define MEI_HDR_FMT "hdr:host=%02d me=%02d len=%d dma=%1d ext=%1d internal=%1d comp=%1d" +#define MEI_HDR_PRM(hdr) \ + (hdr)->host_addr, (hdr)->me_addr, \ + (hdr)->length, (hdr)->dma_ring, (hdr)->extended, \ + (hdr)->internal, (hdr)->msg_complete + +ssize_t mei_fw_status2str(struct mei_fw_status *fw_sts, char *buf, size_t len); +/** + * mei_fw_status_str - fetch and convert fw status registers to printable string + * + * @dev: the device structure + * @buf: string buffer at minimal size MEI_FW_STATUS_STR_SZ + * @len: buffer len must be >= MEI_FW_STATUS_STR_SZ + * + * Return: number of bytes written or < 0 on failure + */ +static inline ssize_t mei_fw_status_str(struct mei_device *dev, + char *buf, size_t len) +{ + struct mei_fw_status fw_status; + int ret; + + buf[0] = '\0'; + + ret = mei_fw_status(dev, &fw_status); + if (ret) + return ret; + + ret = mei_fw_status2str(&fw_status, buf, MEI_FW_STATUS_STR_SZ); + + return ret; +} + + +#endif diff --git a/drivers/misc/mei/mkhi.h b/drivers/misc/mei/mkhi.h new file mode 100644 index 0000000000..1473ea4896 --- /dev/null +++ b/drivers/misc/mei/mkhi.h @@ -0,0 +1,55 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (c) 2003-2022, Intel Corporation. All rights reserved. + * Intel Management Engine Interface (Intel MEI) Linux driver + */ + +#ifndef _MEI_MKHI_H_ +#define _MEI_MKHI_H_ + +#include <linux/types.h> + +#define MKHI_FEATURE_PTT 0x10 + +#define MKHI_FWCAPS_GROUP_ID 0x3 +#define MKHI_FWCAPS_SET_OS_VER_APP_RULE_CMD 6 +#define MKHI_GEN_GROUP_ID 0xFF +#define MKHI_GEN_GET_FW_VERSION_CMD 0x2 + +#define MKHI_GROUP_ID_GFX 0x30 +#define MKHI_GFX_RESET_WARN_CMD_REQ 0x0 +#define MKHI_GFX_MEMORY_READY_CMD_REQ 0x1 + +/* Allow transition to PXP mode without approval */ +#define MKHI_GFX_MEM_READY_PXP_ALLOWED 0x1 + +struct mkhi_rule_id { + __le16 rule_type; + u8 feature_id; + u8 reserved; +} __packed; + +struct mkhi_fwcaps { + struct mkhi_rule_id id; + u8 len; + u8 data[]; +} __packed; + +struct mkhi_msg_hdr { + u8 group_id; + u8 command; + u8 reserved; + u8 result; +} __packed; + +struct mkhi_msg { + struct mkhi_msg_hdr hdr; + u8 data[]; +} __packed; + +struct mkhi_gfx_mem_ready { + struct mkhi_msg_hdr hdr; + u32 flags; +} __packed; + +#endif /* _MEI_MKHI_H_ */ diff --git a/drivers/misc/mei/pci-me.c b/drivers/misc/mei/pci-me.c new file mode 100644 index 0000000000..676d566f38 --- /dev/null +++ b/drivers/misc/mei/pci-me.c @@ -0,0 +1,551 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2003-2022, Intel Corporation. All rights reserved. + * Intel Management Engine Interface (Intel MEI) Linux driver + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/device.h> +#include <linux/errno.h> +#include <linux/types.h> +#include <linux/pci.h> +#include <linux/dma-mapping.h> +#include <linux/sched.h> +#include <linux/interrupt.h> + +#include <linux/pm_domain.h> +#include <linux/pm_runtime.h> + +#include <linux/mei.h> + +#include "mei_dev.h" +#include "client.h" +#include "hw-me-regs.h" +#include "hw-me.h" + +/* mei_pci_tbl - PCI Device ID Table */ +static const struct pci_device_id mei_me_pci_tbl[] = { + {MEI_PCI_DEVICE(MEI_DEV_ID_82946GZ, MEI_ME_ICH_CFG)}, + {MEI_PCI_DEVICE(MEI_DEV_ID_82G35, MEI_ME_ICH_CFG)}, + {MEI_PCI_DEVICE(MEI_DEV_ID_82Q965, MEI_ME_ICH_CFG)}, + {MEI_PCI_DEVICE(MEI_DEV_ID_82G965, MEI_ME_ICH_CFG)}, + {MEI_PCI_DEVICE(MEI_DEV_ID_82GM965, MEI_ME_ICH_CFG)}, + {MEI_PCI_DEVICE(MEI_DEV_ID_82GME965, MEI_ME_ICH_CFG)}, + {MEI_PCI_DEVICE(MEI_DEV_ID_ICH9_82Q35, MEI_ME_ICH_CFG)}, + {MEI_PCI_DEVICE(MEI_DEV_ID_ICH9_82G33, MEI_ME_ICH_CFG)}, + {MEI_PCI_DEVICE(MEI_DEV_ID_ICH9_82Q33, MEI_ME_ICH_CFG)}, + {MEI_PCI_DEVICE(MEI_DEV_ID_ICH9_82X38, MEI_ME_ICH_CFG)}, + {MEI_PCI_DEVICE(MEI_DEV_ID_ICH9_3200, MEI_ME_ICH_CFG)}, + + {MEI_PCI_DEVICE(MEI_DEV_ID_ICH9_6, MEI_ME_ICH_CFG)}, + {MEI_PCI_DEVICE(MEI_DEV_ID_ICH9_7, MEI_ME_ICH_CFG)}, + {MEI_PCI_DEVICE(MEI_DEV_ID_ICH9_8, MEI_ME_ICH_CFG)}, + {MEI_PCI_DEVICE(MEI_DEV_ID_ICH9_9, MEI_ME_ICH_CFG)}, + {MEI_PCI_DEVICE(MEI_DEV_ID_ICH9_10, MEI_ME_ICH_CFG)}, + {MEI_PCI_DEVICE(MEI_DEV_ID_ICH9M_1, MEI_ME_ICH_CFG)}, + {MEI_PCI_DEVICE(MEI_DEV_ID_ICH9M_2, MEI_ME_ICH_CFG)}, + {MEI_PCI_DEVICE(MEI_DEV_ID_ICH9M_3, MEI_ME_ICH_CFG)}, + {MEI_PCI_DEVICE(MEI_DEV_ID_ICH9M_4, MEI_ME_ICH_CFG)}, + + {MEI_PCI_DEVICE(MEI_DEV_ID_ICH10_1, MEI_ME_ICH10_CFG)}, + {MEI_PCI_DEVICE(MEI_DEV_ID_ICH10_2, MEI_ME_ICH10_CFG)}, + {MEI_PCI_DEVICE(MEI_DEV_ID_ICH10_3, MEI_ME_ICH10_CFG)}, + {MEI_PCI_DEVICE(MEI_DEV_ID_ICH10_4, MEI_ME_ICH10_CFG)}, + + {MEI_PCI_DEVICE(MEI_DEV_ID_IBXPK_1, MEI_ME_PCH6_CFG)}, + {MEI_PCI_DEVICE(MEI_DEV_ID_IBXPK_2, MEI_ME_PCH6_CFG)}, + {MEI_PCI_DEVICE(MEI_DEV_ID_CPT_1, MEI_ME_PCH_CPT_PBG_CFG)}, + {MEI_PCI_DEVICE(MEI_DEV_ID_PBG_1, MEI_ME_PCH_CPT_PBG_CFG)}, + {MEI_PCI_DEVICE(MEI_DEV_ID_PPT_1, MEI_ME_PCH7_CFG)}, + {MEI_PCI_DEVICE(MEI_DEV_ID_PPT_2, MEI_ME_PCH7_CFG)}, + {MEI_PCI_DEVICE(MEI_DEV_ID_PPT_3, MEI_ME_PCH7_CFG)}, + {MEI_PCI_DEVICE(MEI_DEV_ID_LPT_H, MEI_ME_PCH8_SPS_4_CFG)}, + {MEI_PCI_DEVICE(MEI_DEV_ID_LPT_W, MEI_ME_PCH8_SPS_4_CFG)}, + {MEI_PCI_DEVICE(MEI_DEV_ID_LPT_LP, MEI_ME_PCH8_CFG)}, + {MEI_PCI_DEVICE(MEI_DEV_ID_LPT_HR, MEI_ME_PCH8_SPS_4_CFG)}, + {MEI_PCI_DEVICE(MEI_DEV_ID_WPT_LP, MEI_ME_PCH8_CFG)}, + {MEI_PCI_DEVICE(MEI_DEV_ID_WPT_LP_2, MEI_ME_PCH8_CFG)}, + + {MEI_PCI_DEVICE(MEI_DEV_ID_SPT, MEI_ME_PCH8_CFG)}, + {MEI_PCI_DEVICE(MEI_DEV_ID_SPT_2, MEI_ME_PCH8_CFG)}, + {MEI_PCI_DEVICE(MEI_DEV_ID_SPT_3, MEI_ME_PCH8_ITOUCH_CFG)}, + {MEI_PCI_DEVICE(MEI_DEV_ID_SPT_H, MEI_ME_PCH8_SPS_4_CFG)}, + {MEI_PCI_DEVICE(MEI_DEV_ID_SPT_H_2, MEI_ME_PCH8_SPS_4_CFG)}, + {MEI_PCI_DEVICE(MEI_DEV_ID_LBG, MEI_ME_PCH12_SPS_4_CFG)}, + + {MEI_PCI_DEVICE(MEI_DEV_ID_BXT_M, MEI_ME_PCH8_CFG)}, + {MEI_PCI_DEVICE(MEI_DEV_ID_APL_I, MEI_ME_PCH8_CFG)}, + + {MEI_PCI_DEVICE(MEI_DEV_ID_DNV_IE, MEI_ME_PCH8_CFG)}, + + {MEI_PCI_DEVICE(MEI_DEV_ID_GLK, MEI_ME_PCH8_CFG)}, + + {MEI_PCI_DEVICE(MEI_DEV_ID_KBP, MEI_ME_PCH8_CFG)}, + {MEI_PCI_DEVICE(MEI_DEV_ID_KBP_2, MEI_ME_PCH8_CFG)}, + {MEI_PCI_DEVICE(MEI_DEV_ID_KBP_3, MEI_ME_PCH8_CFG)}, + + {MEI_PCI_DEVICE(MEI_DEV_ID_CNP_LP, MEI_ME_PCH12_CFG)}, + {MEI_PCI_DEVICE(MEI_DEV_ID_CNP_LP_3, MEI_ME_PCH8_ITOUCH_CFG)}, + {MEI_PCI_DEVICE(MEI_DEV_ID_CNP_H, MEI_ME_PCH12_SPS_CFG)}, + {MEI_PCI_DEVICE(MEI_DEV_ID_CNP_H_3, MEI_ME_PCH12_SPS_ITOUCH_CFG)}, + + {MEI_PCI_DEVICE(MEI_DEV_ID_CMP_LP, MEI_ME_PCH12_CFG)}, + {MEI_PCI_DEVICE(MEI_DEV_ID_CMP_LP_3, MEI_ME_PCH8_ITOUCH_CFG)}, + {MEI_PCI_DEVICE(MEI_DEV_ID_CMP_V, MEI_ME_PCH12_CFG)}, + {MEI_PCI_DEVICE(MEI_DEV_ID_CMP_H, MEI_ME_PCH12_CFG)}, + {MEI_PCI_DEVICE(MEI_DEV_ID_CMP_H_3, MEI_ME_PCH8_ITOUCH_CFG)}, + + {MEI_PCI_DEVICE(MEI_DEV_ID_ICP_LP, MEI_ME_PCH12_CFG)}, + {MEI_PCI_DEVICE(MEI_DEV_ID_ICP_N, MEI_ME_PCH12_CFG)}, + + {MEI_PCI_DEVICE(MEI_DEV_ID_TGP_LP, MEI_ME_PCH15_CFG)}, + {MEI_PCI_DEVICE(MEI_DEV_ID_TGP_H, MEI_ME_PCH15_SPS_CFG)}, + + {MEI_PCI_DEVICE(MEI_DEV_ID_JSP_N, MEI_ME_PCH15_CFG)}, + + {MEI_PCI_DEVICE(MEI_DEV_ID_MCC, MEI_ME_PCH15_CFG)}, + {MEI_PCI_DEVICE(MEI_DEV_ID_MCC_4, MEI_ME_PCH8_CFG)}, + + {MEI_PCI_DEVICE(MEI_DEV_ID_CDF, MEI_ME_PCH8_CFG)}, + + {MEI_PCI_DEVICE(MEI_DEV_ID_EBG, MEI_ME_PCH15_SPS_CFG)}, + + {MEI_PCI_DEVICE(MEI_DEV_ID_ADP_S, MEI_ME_PCH15_CFG)}, + {MEI_PCI_DEVICE(MEI_DEV_ID_ADP_LP, MEI_ME_PCH15_CFG)}, + {MEI_PCI_DEVICE(MEI_DEV_ID_ADP_P, MEI_ME_PCH15_CFG)}, + {MEI_PCI_DEVICE(MEI_DEV_ID_ADP_N, MEI_ME_PCH15_CFG)}, + + {MEI_PCI_DEVICE(MEI_DEV_ID_RPL_S, MEI_ME_PCH15_CFG)}, + + {MEI_PCI_DEVICE(MEI_DEV_ID_MTL_M, MEI_ME_PCH15_CFG)}, + + /* required last entry */ + {0, } +}; + +MODULE_DEVICE_TABLE(pci, mei_me_pci_tbl); + +#ifdef CONFIG_PM +static inline void mei_me_set_pm_domain(struct mei_device *dev); +static inline void mei_me_unset_pm_domain(struct mei_device *dev); +#else +static inline void mei_me_set_pm_domain(struct mei_device *dev) {} +static inline void mei_me_unset_pm_domain(struct mei_device *dev) {} +#endif /* CONFIG_PM */ + +static int mei_me_read_fws(const struct mei_device *dev, int where, u32 *val) +{ + struct pci_dev *pdev = to_pci_dev(dev->dev); + + return pci_read_config_dword(pdev, where, val); +} + +/** + * mei_me_quirk_probe - probe for devices that doesn't valid ME interface + * + * @pdev: PCI device structure + * @cfg: per generation config + * + * Return: true if ME Interface is valid, false otherwise + */ +static bool mei_me_quirk_probe(struct pci_dev *pdev, + const struct mei_cfg *cfg) +{ + if (cfg->quirk_probe && cfg->quirk_probe(pdev)) { + dev_info(&pdev->dev, "Device doesn't have valid ME Interface\n"); + return false; + } + + return true; +} + +/** + * mei_me_probe - Device Initialization Routine + * + * @pdev: PCI device structure + * @ent: entry in kcs_pci_tbl + * + * Return: 0 on success, <0 on failure. + */ +static int mei_me_probe(struct pci_dev *pdev, const struct pci_device_id *ent) +{ + const struct mei_cfg *cfg; + struct mei_device *dev; + struct mei_me_hw *hw; + unsigned int irqflags; + int err; + + cfg = mei_me_get_cfg(ent->driver_data); + if (!cfg) + return -ENODEV; + + if (!mei_me_quirk_probe(pdev, cfg)) + return -ENODEV; + + /* enable pci dev */ + err = pcim_enable_device(pdev); + if (err) { + dev_err(&pdev->dev, "failed to enable pci device.\n"); + goto end; + } + /* set PCI host mastering */ + pci_set_master(pdev); + /* pci request regions and mapping IO device memory for mei driver */ + err = pcim_iomap_regions(pdev, BIT(0), KBUILD_MODNAME); + if (err) { + dev_err(&pdev->dev, "failed to get pci regions.\n"); + goto end; + } + + err = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64)); + if (err) { + dev_err(&pdev->dev, "No usable DMA configuration, aborting\n"); + goto end; + } + + /* allocates and initializes the mei dev structure */ + dev = mei_me_dev_init(&pdev->dev, cfg, false); + if (!dev) { + err = -ENOMEM; + goto end; + } + hw = to_me_hw(dev); + hw->mem_addr = pcim_iomap_table(pdev)[0]; + hw->read_fws = mei_me_read_fws; + + pci_enable_msi(pdev); + + hw->irq = pdev->irq; + + /* request and enable interrupt */ + irqflags = pci_dev_msi_enabled(pdev) ? IRQF_ONESHOT : IRQF_SHARED; + + err = request_threaded_irq(pdev->irq, + mei_me_irq_quick_handler, + mei_me_irq_thread_handler, + irqflags, KBUILD_MODNAME, dev); + if (err) { + dev_err(&pdev->dev, "request_threaded_irq failure. irq = %d\n", + pdev->irq); + goto end; + } + + if (mei_start(dev)) { + dev_err(&pdev->dev, "init hw failure.\n"); + err = -ENODEV; + goto release_irq; + } + + pm_runtime_set_autosuspend_delay(&pdev->dev, MEI_ME_RPM_TIMEOUT); + pm_runtime_use_autosuspend(&pdev->dev); + + err = mei_register(dev, &pdev->dev); + if (err) + goto stop; + + pci_set_drvdata(pdev, dev); + + /* + * MEI requires to resume from runtime suspend mode + * in order to perform link reset flow upon system suspend. + */ + dev_pm_set_driver_flags(&pdev->dev, DPM_FLAG_NO_DIRECT_COMPLETE); + + /* + * ME maps runtime suspend/resume to D0i states, + * hence we need to go around native PCI runtime service which + * eventually brings the device into D3cold/hot state, + * but the mei device cannot wake up from D3 unlike from D0i3. + * To get around the PCI device native runtime pm, + * ME uses runtime pm domain handlers which take precedence + * over the driver's pm handlers. + */ + mei_me_set_pm_domain(dev); + + if (mei_pg_is_enabled(dev)) { + pm_runtime_put_noidle(&pdev->dev); + if (hw->d0i3_supported) + pm_runtime_allow(&pdev->dev); + } + + dev_dbg(&pdev->dev, "initialization successful.\n"); + + return 0; + +stop: + mei_stop(dev); +release_irq: + mei_cancel_work(dev); + mei_disable_interrupts(dev); + free_irq(pdev->irq, dev); +end: + dev_err(&pdev->dev, "initialization failed.\n"); + return err; +} + +/** + * mei_me_shutdown - Device Removal Routine + * + * @pdev: PCI device structure + * + * mei_me_shutdown is called from the reboot notifier + * it's a simplified version of remove so we go down + * faster. + */ +static void mei_me_shutdown(struct pci_dev *pdev) +{ + struct mei_device *dev; + + dev = pci_get_drvdata(pdev); + if (!dev) + return; + + dev_dbg(&pdev->dev, "shutdown\n"); + mei_stop(dev); + + mei_me_unset_pm_domain(dev); + + mei_disable_interrupts(dev); + free_irq(pdev->irq, dev); +} + +/** + * mei_me_remove - Device Removal Routine + * + * @pdev: PCI device structure + * + * mei_me_remove is called by the PCI subsystem to alert the driver + * that it should release a PCI device. + */ +static void mei_me_remove(struct pci_dev *pdev) +{ + struct mei_device *dev; + + dev = pci_get_drvdata(pdev); + if (!dev) + return; + + if (mei_pg_is_enabled(dev)) + pm_runtime_get_noresume(&pdev->dev); + + dev_dbg(&pdev->dev, "stop\n"); + mei_stop(dev); + + mei_me_unset_pm_domain(dev); + + mei_disable_interrupts(dev); + + free_irq(pdev->irq, dev); + + mei_deregister(dev); +} + +#ifdef CONFIG_PM_SLEEP +static int mei_me_pci_prepare(struct device *device) +{ + pm_runtime_resume(device); + return 0; +} + +static int mei_me_pci_suspend(struct device *device) +{ + struct pci_dev *pdev = to_pci_dev(device); + struct mei_device *dev = pci_get_drvdata(pdev); + + if (!dev) + return -ENODEV; + + dev_dbg(&pdev->dev, "suspend\n"); + + mei_stop(dev); + + mei_disable_interrupts(dev); + + free_irq(pdev->irq, dev); + pci_disable_msi(pdev); + + return 0; +} + +static int mei_me_pci_resume(struct device *device) +{ + struct pci_dev *pdev = to_pci_dev(device); + struct mei_device *dev; + unsigned int irqflags; + int err; + + dev = pci_get_drvdata(pdev); + if (!dev) + return -ENODEV; + + pci_enable_msi(pdev); + + irqflags = pci_dev_msi_enabled(pdev) ? IRQF_ONESHOT : IRQF_SHARED; + + /* request and enable interrupt */ + err = request_threaded_irq(pdev->irq, + mei_me_irq_quick_handler, + mei_me_irq_thread_handler, + irqflags, KBUILD_MODNAME, dev); + + if (err) { + dev_err(&pdev->dev, "request_threaded_irq failed: irq = %d.\n", + pdev->irq); + return err; + } + + err = mei_restart(dev); + if (err) + return err; + + /* Start timer if stopped in suspend */ + schedule_delayed_work(&dev->timer_work, HZ); + + return 0; +} + +static void mei_me_pci_complete(struct device *device) +{ + pm_runtime_suspend(device); +} +#else /* CONFIG_PM_SLEEP */ + +#define mei_me_pci_prepare NULL +#define mei_me_pci_complete NULL + +#endif /* !CONFIG_PM_SLEEP */ + +#ifdef CONFIG_PM +static int mei_me_pm_runtime_idle(struct device *device) +{ + struct mei_device *dev; + + dev_dbg(device, "rpm: me: runtime_idle\n"); + + dev = dev_get_drvdata(device); + if (!dev) + return -ENODEV; + if (mei_write_is_idle(dev)) + pm_runtime_autosuspend(device); + + return -EBUSY; +} + +static int mei_me_pm_runtime_suspend(struct device *device) +{ + struct mei_device *dev; + int ret; + + dev_dbg(device, "rpm: me: runtime suspend\n"); + + dev = dev_get_drvdata(device); + if (!dev) + return -ENODEV; + + mutex_lock(&dev->device_lock); + + if (mei_write_is_idle(dev)) + ret = mei_me_pg_enter_sync(dev); + else + ret = -EAGAIN; + + mutex_unlock(&dev->device_lock); + + dev_dbg(device, "rpm: me: runtime suspend ret=%d\n", ret); + + if (ret && ret != -EAGAIN) + schedule_work(&dev->reset_work); + + return ret; +} + +static int mei_me_pm_runtime_resume(struct device *device) +{ + struct mei_device *dev; + int ret; + + dev_dbg(device, "rpm: me: runtime resume\n"); + + dev = dev_get_drvdata(device); + if (!dev) + return -ENODEV; + + mutex_lock(&dev->device_lock); + + ret = mei_me_pg_exit_sync(dev); + + mutex_unlock(&dev->device_lock); + + dev_dbg(device, "rpm: me: runtime resume ret = %d\n", ret); + + if (ret) + schedule_work(&dev->reset_work); + + return ret; +} + +/** + * mei_me_set_pm_domain - fill and set pm domain structure for device + * + * @dev: mei_device + */ +static inline void mei_me_set_pm_domain(struct mei_device *dev) +{ + struct pci_dev *pdev = to_pci_dev(dev->dev); + + if (pdev->dev.bus && pdev->dev.bus->pm) { + dev->pg_domain.ops = *pdev->dev.bus->pm; + + dev->pg_domain.ops.runtime_suspend = mei_me_pm_runtime_suspend; + dev->pg_domain.ops.runtime_resume = mei_me_pm_runtime_resume; + dev->pg_domain.ops.runtime_idle = mei_me_pm_runtime_idle; + + dev_pm_domain_set(&pdev->dev, &dev->pg_domain); + } +} + +/** + * mei_me_unset_pm_domain - clean pm domain structure for device + * + * @dev: mei_device + */ +static inline void mei_me_unset_pm_domain(struct mei_device *dev) +{ + /* stop using pm callbacks if any */ + dev_pm_domain_set(dev->dev, NULL); +} + +static const struct dev_pm_ops mei_me_pm_ops = { + .prepare = mei_me_pci_prepare, + .complete = mei_me_pci_complete, + SET_SYSTEM_SLEEP_PM_OPS(mei_me_pci_suspend, + mei_me_pci_resume) + SET_RUNTIME_PM_OPS( + mei_me_pm_runtime_suspend, + mei_me_pm_runtime_resume, + mei_me_pm_runtime_idle) +}; + +#define MEI_ME_PM_OPS (&mei_me_pm_ops) +#else +#define MEI_ME_PM_OPS NULL +#endif /* CONFIG_PM */ +/* + * PCI driver structure + */ +static struct pci_driver mei_me_driver = { + .name = KBUILD_MODNAME, + .id_table = mei_me_pci_tbl, + .probe = mei_me_probe, + .remove = mei_me_remove, + .shutdown = mei_me_shutdown, + .driver.pm = MEI_ME_PM_OPS, + .driver.probe_type = PROBE_PREFER_ASYNCHRONOUS, +}; + +module_pci_driver(mei_me_driver); + +MODULE_AUTHOR("Intel Corporation"); +MODULE_DESCRIPTION("Intel(R) Management Engine Interface"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/misc/mei/pci-txe.c b/drivers/misc/mei/pci-txe.c new file mode 100644 index 0000000000..fa20d9a278 --- /dev/null +++ b/drivers/misc/mei/pci-txe.c @@ -0,0 +1,406 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2013-2020, Intel Corporation. All rights reserved. + * Intel Management Engine Interface (Intel MEI) Linux driver + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/device.h> +#include <linux/errno.h> +#include <linux/types.h> +#include <linux/pci.h> +#include <linux/init.h> +#include <linux/sched.h> +#include <linux/interrupt.h> +#include <linux/workqueue.h> +#include <linux/pm_domain.h> +#include <linux/pm_runtime.h> + +#include <linux/mei.h> + + +#include "mei_dev.h" +#include "hw-txe.h" + +static const struct pci_device_id mei_txe_pci_tbl[] = { + {PCI_VDEVICE(INTEL, 0x0F18)}, /* Baytrail */ + {PCI_VDEVICE(INTEL, 0x2298)}, /* Cherrytrail */ + + {0, } +}; +MODULE_DEVICE_TABLE(pci, mei_txe_pci_tbl); + +#ifdef CONFIG_PM +static inline void mei_txe_set_pm_domain(struct mei_device *dev); +static inline void mei_txe_unset_pm_domain(struct mei_device *dev); +#else +static inline void mei_txe_set_pm_domain(struct mei_device *dev) {} +static inline void mei_txe_unset_pm_domain(struct mei_device *dev) {} +#endif /* CONFIG_PM */ + +/** + * mei_txe_probe - Device Initialization Routine + * + * @pdev: PCI device structure + * @ent: entry in mei_txe_pci_tbl + * + * Return: 0 on success, <0 on failure. + */ +static int mei_txe_probe(struct pci_dev *pdev, const struct pci_device_id *ent) +{ + struct mei_device *dev; + struct mei_txe_hw *hw; + const int mask = BIT(SEC_BAR) | BIT(BRIDGE_BAR); + int err; + + /* enable pci dev */ + err = pcim_enable_device(pdev); + if (err) { + dev_err(&pdev->dev, "failed to enable pci device.\n"); + goto end; + } + /* set PCI host mastering */ + pci_set_master(pdev); + /* pci request regions and mapping IO device memory for mei driver */ + err = pcim_iomap_regions(pdev, mask, KBUILD_MODNAME); + if (err) { + dev_err(&pdev->dev, "failed to get pci regions.\n"); + goto end; + } + + err = dma_set_mask(&pdev->dev, DMA_BIT_MASK(36)); + if (err) { + err = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32)); + if (err) { + dev_err(&pdev->dev, "No suitable DMA available.\n"); + goto end; + } + } + + /* allocates and initializes the mei dev structure */ + dev = mei_txe_dev_init(pdev); + if (!dev) { + err = -ENOMEM; + goto end; + } + hw = to_txe_hw(dev); + hw->mem_addr = pcim_iomap_table(pdev); + + pci_enable_msi(pdev); + + /* clear spurious interrupts */ + mei_clear_interrupts(dev); + + /* request and enable interrupt */ + if (pci_dev_msi_enabled(pdev)) + err = request_threaded_irq(pdev->irq, + NULL, + mei_txe_irq_thread_handler, + IRQF_ONESHOT, KBUILD_MODNAME, dev); + else + err = request_threaded_irq(pdev->irq, + mei_txe_irq_quick_handler, + mei_txe_irq_thread_handler, + IRQF_SHARED, KBUILD_MODNAME, dev); + if (err) { + dev_err(&pdev->dev, "mei: request_threaded_irq failure. irq = %d\n", + pdev->irq); + goto end; + } + + if (mei_start(dev)) { + dev_err(&pdev->dev, "init hw failure.\n"); + err = -ENODEV; + goto release_irq; + } + + pm_runtime_set_autosuspend_delay(&pdev->dev, MEI_TXI_RPM_TIMEOUT); + pm_runtime_use_autosuspend(&pdev->dev); + + err = mei_register(dev, &pdev->dev); + if (err) + goto stop; + + pci_set_drvdata(pdev, dev); + + /* + * MEI requires to resume from runtime suspend mode + * in order to perform link reset flow upon system suspend. + */ + dev_pm_set_driver_flags(&pdev->dev, DPM_FLAG_NO_DIRECT_COMPLETE); + + /* + * TXE maps runtime suspend/resume to own power gating states, + * hence we need to go around native PCI runtime service which + * eventually brings the device into D3cold/hot state. + * But the TXE device cannot wake up from D3 unlike from own + * power gating. To get around PCI device native runtime pm, + * TXE uses runtime pm domain handlers which take precedence. + */ + mei_txe_set_pm_domain(dev); + + pm_runtime_put_noidle(&pdev->dev); + + return 0; + +stop: + mei_stop(dev); +release_irq: + mei_cancel_work(dev); + mei_disable_interrupts(dev); + free_irq(pdev->irq, dev); +end: + dev_err(&pdev->dev, "initialization failed.\n"); + return err; +} + +/** + * mei_txe_shutdown- Device Shutdown Routine + * + * @pdev: PCI device structure + * + * mei_txe_shutdown is called from the reboot notifier + * it's a simplified version of remove so we go down + * faster. + */ +static void mei_txe_shutdown(struct pci_dev *pdev) +{ + struct mei_device *dev; + + dev = pci_get_drvdata(pdev); + if (!dev) + return; + + dev_dbg(&pdev->dev, "shutdown\n"); + mei_stop(dev); + + mei_txe_unset_pm_domain(dev); + + mei_disable_interrupts(dev); + free_irq(pdev->irq, dev); +} + +/** + * mei_txe_remove - Device Removal Routine + * + * @pdev: PCI device structure + * + * mei_remove is called by the PCI subsystem to alert the driver + * that it should release a PCI device. + */ +static void mei_txe_remove(struct pci_dev *pdev) +{ + struct mei_device *dev; + + dev = pci_get_drvdata(pdev); + if (!dev) { + dev_err(&pdev->dev, "mei: dev == NULL\n"); + return; + } + + pm_runtime_get_noresume(&pdev->dev); + + mei_stop(dev); + + mei_txe_unset_pm_domain(dev); + + mei_disable_interrupts(dev); + free_irq(pdev->irq, dev); + + mei_deregister(dev); +} + + +#ifdef CONFIG_PM_SLEEP +static int mei_txe_pci_suspend(struct device *device) +{ + struct pci_dev *pdev = to_pci_dev(device); + struct mei_device *dev = pci_get_drvdata(pdev); + + if (!dev) + return -ENODEV; + + dev_dbg(&pdev->dev, "suspend\n"); + + mei_stop(dev); + + mei_disable_interrupts(dev); + + free_irq(pdev->irq, dev); + pci_disable_msi(pdev); + + return 0; +} + +static int mei_txe_pci_resume(struct device *device) +{ + struct pci_dev *pdev = to_pci_dev(device); + struct mei_device *dev; + int err; + + dev = pci_get_drvdata(pdev); + if (!dev) + return -ENODEV; + + pci_enable_msi(pdev); + + mei_clear_interrupts(dev); + + /* request and enable interrupt */ + if (pci_dev_msi_enabled(pdev)) + err = request_threaded_irq(pdev->irq, + NULL, + mei_txe_irq_thread_handler, + IRQF_ONESHOT, KBUILD_MODNAME, dev); + else + err = request_threaded_irq(pdev->irq, + mei_txe_irq_quick_handler, + mei_txe_irq_thread_handler, + IRQF_SHARED, KBUILD_MODNAME, dev); + if (err) { + dev_err(&pdev->dev, "request_threaded_irq failed: irq = %d.\n", + pdev->irq); + return err; + } + + err = mei_restart(dev); + + return err; +} +#endif /* CONFIG_PM_SLEEP */ + +#ifdef CONFIG_PM +static int mei_txe_pm_runtime_idle(struct device *device) +{ + struct mei_device *dev; + + dev_dbg(device, "rpm: txe: runtime_idle\n"); + + dev = dev_get_drvdata(device); + if (!dev) + return -ENODEV; + if (mei_write_is_idle(dev)) + pm_runtime_autosuspend(device); + + return -EBUSY; +} +static int mei_txe_pm_runtime_suspend(struct device *device) +{ + struct mei_device *dev; + int ret; + + dev_dbg(device, "rpm: txe: runtime suspend\n"); + + dev = dev_get_drvdata(device); + if (!dev) + return -ENODEV; + + mutex_lock(&dev->device_lock); + + if (mei_write_is_idle(dev)) + ret = mei_txe_aliveness_set_sync(dev, 0); + else + ret = -EAGAIN; + + /* keep irq on we are staying in D0 */ + + dev_dbg(device, "rpm: txe: runtime suspend ret=%d\n", ret); + + mutex_unlock(&dev->device_lock); + + if (ret && ret != -EAGAIN) + schedule_work(&dev->reset_work); + + return ret; +} + +static int mei_txe_pm_runtime_resume(struct device *device) +{ + struct mei_device *dev; + int ret; + + dev_dbg(device, "rpm: txe: runtime resume\n"); + + dev = dev_get_drvdata(device); + if (!dev) + return -ENODEV; + + mutex_lock(&dev->device_lock); + + mei_enable_interrupts(dev); + + ret = mei_txe_aliveness_set_sync(dev, 1); + + mutex_unlock(&dev->device_lock); + + dev_dbg(device, "rpm: txe: runtime resume ret = %d\n", ret); + + if (ret) + schedule_work(&dev->reset_work); + + return ret; +} + +/** + * mei_txe_set_pm_domain - fill and set pm domain structure for device + * + * @dev: mei_device + */ +static inline void mei_txe_set_pm_domain(struct mei_device *dev) +{ + struct pci_dev *pdev = to_pci_dev(dev->dev); + + if (pdev->dev.bus && pdev->dev.bus->pm) { + dev->pg_domain.ops = *pdev->dev.bus->pm; + + dev->pg_domain.ops.runtime_suspend = mei_txe_pm_runtime_suspend; + dev->pg_domain.ops.runtime_resume = mei_txe_pm_runtime_resume; + dev->pg_domain.ops.runtime_idle = mei_txe_pm_runtime_idle; + + dev_pm_domain_set(&pdev->dev, &dev->pg_domain); + } +} + +/** + * mei_txe_unset_pm_domain - clean pm domain structure for device + * + * @dev: mei_device + */ +static inline void mei_txe_unset_pm_domain(struct mei_device *dev) +{ + /* stop using pm callbacks if any */ + dev_pm_domain_set(dev->dev, NULL); +} + +static const struct dev_pm_ops mei_txe_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(mei_txe_pci_suspend, + mei_txe_pci_resume) + SET_RUNTIME_PM_OPS( + mei_txe_pm_runtime_suspend, + mei_txe_pm_runtime_resume, + mei_txe_pm_runtime_idle) +}; + +#define MEI_TXE_PM_OPS (&mei_txe_pm_ops) +#else +#define MEI_TXE_PM_OPS NULL +#endif /* CONFIG_PM */ + +/* + * PCI driver structure + */ +static struct pci_driver mei_txe_driver = { + .name = KBUILD_MODNAME, + .id_table = mei_txe_pci_tbl, + .probe = mei_txe_probe, + .remove = mei_txe_remove, + .shutdown = mei_txe_shutdown, + .driver.pm = MEI_TXE_PM_OPS, +}; + +module_pci_driver(mei_txe_driver); + +MODULE_AUTHOR("Intel Corporation"); +MODULE_DESCRIPTION("Intel(R) Trusted Execution Environment Interface"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/misc/mei/pxp/Kconfig b/drivers/misc/mei/pxp/Kconfig new file mode 100644 index 0000000000..4029b96afc --- /dev/null +++ b/drivers/misc/mei/pxp/Kconfig @@ -0,0 +1,13 @@ + +# SPDX-License-Identifier: GPL-2.0 +# Copyright (c) 2020, Intel Corporation. All rights reserved. +# +config INTEL_MEI_PXP + tristate "Intel PXP services of ME Interface" + select INTEL_MEI_ME + depends on DRM_I915 + help + MEI Support for PXP Services on Intel platforms. + + Enables the ME FW services required for PXP support through + I915 display driver of Intel. diff --git a/drivers/misc/mei/pxp/Makefile b/drivers/misc/mei/pxp/Makefile new file mode 100644 index 0000000000..0329950d57 --- /dev/null +++ b/drivers/misc/mei/pxp/Makefile @@ -0,0 +1,7 @@ +# SPDX-License-Identifier: GPL-2.0 +# +# Copyright (c) 2020, Intel Corporation. All rights reserved. +# +# Makefile - PXP client driver for Intel MEI Bus Driver. + +obj-$(CONFIG_INTEL_MEI_PXP) += mei_pxp.o diff --git a/drivers/misc/mei/pxp/mei_pxp.c b/drivers/misc/mei/pxp/mei_pxp.c new file mode 100644 index 0000000000..2dcb9169e4 --- /dev/null +++ b/drivers/misc/mei/pxp/mei_pxp.c @@ -0,0 +1,260 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright © 2020 - 2021 Intel Corporation + */ + +/** + * DOC: MEI_PXP Client Driver + * + * The mei_pxp driver acts as a translation layer between PXP + * protocol implementer (I915) and ME FW by translating PXP + * negotiation messages to ME FW command payloads and vice versa. + */ + +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/mei.h> +#include <linux/mei_cl_bus.h> +#include <linux/component.h> +#include <drm/drm_connector.h> +#include <drm/i915_component.h> +#include <drm/i915_pxp_tee_interface.h> + +#include "mei_pxp.h" + +/** + * mei_pxp_send_message() - Sends a PXP message to ME FW. + * @dev: device corresponding to the mei_cl_device + * @message: a message buffer to send + * @size: size of the message + * Return: 0 on Success, <0 on Failure + */ +static int +mei_pxp_send_message(struct device *dev, const void *message, size_t size) +{ + struct mei_cl_device *cldev; + ssize_t byte; + + if (!dev || !message) + return -EINVAL; + + cldev = to_mei_cl_device(dev); + + byte = mei_cldev_send(cldev, message, size); + if (byte < 0) { + dev_dbg(dev, "mei_cldev_send failed. %zd\n", byte); + return byte; + } + + return 0; +} + +/** + * mei_pxp_receive_message() - Receives a PXP message from ME FW. + * @dev: device corresponding to the mei_cl_device + * @buffer: a message buffer to contain the received message + * @size: size of the buffer + * Return: bytes sent on Success, <0 on Failure + */ +static int +mei_pxp_receive_message(struct device *dev, void *buffer, size_t size) +{ + struct mei_cl_device *cldev; + ssize_t byte; + + if (!dev || !buffer) + return -EINVAL; + + cldev = to_mei_cl_device(dev); + + byte = mei_cldev_recv(cldev, buffer, size); + if (byte < 0) { + dev_dbg(dev, "mei_cldev_recv failed. %zd\n", byte); + return byte; + } + + return byte; +} + +/** + * mei_pxp_gsc_command() - sends a gsc command, by sending + * a sgl mei message to gsc and receiving reply from gsc + * + * @dev: device corresponding to the mei_cl_device + * @client_id: client id to send the command to + * @fence_id: fence id to send the command to + * @sg_in: scatter gather list containing addresses for rx message buffer + * @total_in_len: total length of data in 'in' sg, can be less than the sum of buffers sizes + * @sg_out: scatter gather list containing addresses for tx message buffer + * + * Return: bytes sent on Success, <0 on Failure + */ +static ssize_t mei_pxp_gsc_command(struct device *dev, u8 client_id, u32 fence_id, + struct scatterlist *sg_in, size_t total_in_len, + struct scatterlist *sg_out) +{ + struct mei_cl_device *cldev; + + cldev = to_mei_cl_device(dev); + + return mei_cldev_send_gsc_command(cldev, client_id, fence_id, sg_in, total_in_len, sg_out); +} + +static const struct i915_pxp_component_ops mei_pxp_ops = { + .owner = THIS_MODULE, + .send = mei_pxp_send_message, + .recv = mei_pxp_receive_message, + .gsc_command = mei_pxp_gsc_command, +}; + +static int mei_component_master_bind(struct device *dev) +{ + struct mei_cl_device *cldev = to_mei_cl_device(dev); + struct i915_pxp_component *comp_master = mei_cldev_get_drvdata(cldev); + int ret; + + comp_master->ops = &mei_pxp_ops; + comp_master->tee_dev = dev; + ret = component_bind_all(dev, comp_master); + if (ret < 0) + return ret; + + return 0; +} + +static void mei_component_master_unbind(struct device *dev) +{ + struct mei_cl_device *cldev = to_mei_cl_device(dev); + struct i915_pxp_component *comp_master = mei_cldev_get_drvdata(cldev); + + component_unbind_all(dev, comp_master); +} + +static const struct component_master_ops mei_component_master_ops = { + .bind = mei_component_master_bind, + .unbind = mei_component_master_unbind, +}; + +/** + * mei_pxp_component_match - compare function for matching mei pxp. + * + * The function checks if the driver is i915, the subcomponent is PXP + * and the grand parent of pxp and the parent of i915 are the same + * PCH device. + * + * @dev: master device + * @subcomponent: subcomponent to match (I915_COMPONENT_PXP) + * @data: compare data (mei pxp device) + * + * Return: + * * 1 - if components match + * * 0 - otherwise + */ +static int mei_pxp_component_match(struct device *dev, int subcomponent, + void *data) +{ + struct device *base = data; + + if (!dev) + return 0; + + if (!dev->driver || strcmp(dev->driver->name, "i915") || + subcomponent != I915_COMPONENT_PXP) + return 0; + + base = base->parent; + if (!base) /* mei device */ + return 0; + + base = base->parent; /* pci device */ + /* for dgfx */ + if (base && dev == base) + return 1; + + /* for pch */ + dev = dev->parent; + return (base && dev && dev == base); +} + +static int mei_pxp_probe(struct mei_cl_device *cldev, + const struct mei_cl_device_id *id) +{ + struct i915_pxp_component *comp_master; + struct component_match *master_match; + int ret; + + ret = mei_cldev_enable(cldev); + if (ret < 0) { + dev_err(&cldev->dev, "mei_cldev_enable Failed. %d\n", ret); + goto enable_err_exit; + } + + comp_master = kzalloc(sizeof(*comp_master), GFP_KERNEL); + if (!comp_master) { + ret = -ENOMEM; + goto err_exit; + } + + master_match = NULL; + component_match_add_typed(&cldev->dev, &master_match, + mei_pxp_component_match, &cldev->dev); + if (IS_ERR_OR_NULL(master_match)) { + ret = -ENOMEM; + goto err_exit; + } + + mei_cldev_set_drvdata(cldev, comp_master); + ret = component_master_add_with_match(&cldev->dev, + &mei_component_master_ops, + master_match); + if (ret < 0) { + dev_err(&cldev->dev, "Master comp add failed %d\n", ret); + goto err_exit; + } + + return 0; + +err_exit: + mei_cldev_set_drvdata(cldev, NULL); + kfree(comp_master); + mei_cldev_disable(cldev); +enable_err_exit: + return ret; +} + +static void mei_pxp_remove(struct mei_cl_device *cldev) +{ + struct i915_pxp_component *comp_master = mei_cldev_get_drvdata(cldev); + int ret; + + component_master_del(&cldev->dev, &mei_component_master_ops); + kfree(comp_master); + mei_cldev_set_drvdata(cldev, NULL); + + ret = mei_cldev_disable(cldev); + if (ret) + dev_warn(&cldev->dev, "mei_cldev_disable() failed\n"); +} + +/* fbf6fcf1-96cf-4e2e-a6a6-1bab8cbe36b1 : PAVP GUID*/ +#define MEI_GUID_PXP UUID_LE(0xfbf6fcf1, 0x96cf, 0x4e2e, 0xA6, \ + 0xa6, 0x1b, 0xab, 0x8c, 0xbe, 0x36, 0xb1) + +static struct mei_cl_device_id mei_pxp_tbl[] = { + { .uuid = MEI_GUID_PXP, .version = MEI_CL_VERSION_ANY }, + { } +}; +MODULE_DEVICE_TABLE(mei, mei_pxp_tbl); + +static struct mei_cl_driver mei_pxp_driver = { + .id_table = mei_pxp_tbl, + .name = KBUILD_MODNAME, + .probe = mei_pxp_probe, + .remove = mei_pxp_remove, +}; + +module_mei_cl_driver(mei_pxp_driver); + +MODULE_AUTHOR("Intel Corporation"); +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("MEI PXP"); diff --git a/drivers/misc/mei/pxp/mei_pxp.h b/drivers/misc/mei/pxp/mei_pxp.h new file mode 100644 index 0000000000..e7b15373fe --- /dev/null +++ b/drivers/misc/mei/pxp/mei_pxp.h @@ -0,0 +1,18 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright © 2020 Intel Corporation + * + * Authors: + * Vitaly Lubart <vitaly.lubart@intel.com> + */ + +#ifndef __MEI_PXP_H__ +#define __MEI_PXP_H__ + +/* me_pxp_status: Enumeration of all PXP Status Codes */ +enum me_pxp_status { + ME_PXP_STATUS_SUCCESS = 0x0000, + +}; + +#endif /* __MEI_PXP_H__ */ |