summaryrefslogtreecommitdiffstats
path: root/drivers/mmc/host/cavium.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/mmc/host/cavium.c')
-rw-r--r--drivers/mmc/host/cavium.c1084
1 files changed, 1084 insertions, 0 deletions
diff --git a/drivers/mmc/host/cavium.c b/drivers/mmc/host/cavium.c
new file mode 100644
index 0000000000..95a41983c6
--- /dev/null
+++ b/drivers/mmc/host/cavium.c
@@ -0,0 +1,1084 @@
+/*
+ * Shared part of driver for MMC/SDHC controller on Cavium OCTEON and
+ * ThunderX SOCs.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2012-2017 Cavium Inc.
+ * Authors:
+ * David Daney <david.daney@cavium.com>
+ * Peter Swain <pswain@cavium.com>
+ * Steven J. Hill <steven.hill@cavium.com>
+ * Jan Glauber <jglauber@cavium.com>
+ */
+#include <linux/bitfield.h>
+#include <linux/delay.h>
+#include <linux/dma-direction.h>
+#include <linux/dma-mapping.h>
+#include <linux/gpio/consumer.h>
+#include <linux/interrupt.h>
+#include <linux/mmc/mmc.h>
+#include <linux/mmc/slot-gpio.h>
+#include <linux/module.h>
+#include <linux/regulator/consumer.h>
+#include <linux/scatterlist.h>
+#include <linux/time.h>
+
+#include "cavium.h"
+
+const char *cvm_mmc_irq_names[] = {
+ "MMC Buffer",
+ "MMC Command",
+ "MMC DMA",
+ "MMC Command Error",
+ "MMC DMA Error",
+ "MMC Switch",
+ "MMC Switch Error",
+ "MMC DMA int Fifo",
+ "MMC DMA int",
+};
+
+/*
+ * The Cavium MMC host hardware assumes that all commands have fixed
+ * command and response types. These are correct if MMC devices are
+ * being used. However, non-MMC devices like SD use command and
+ * response types that are unexpected by the host hardware.
+ *
+ * The command and response types can be overridden by supplying an
+ * XOR value that is applied to the type. We calculate the XOR value
+ * from the values in this table and the flags passed from the MMC
+ * core.
+ */
+static struct cvm_mmc_cr_type cvm_mmc_cr_types[] = {
+ {0, 0}, /* CMD0 */
+ {0, 3}, /* CMD1 */
+ {0, 2}, /* CMD2 */
+ {0, 1}, /* CMD3 */
+ {0, 0}, /* CMD4 */
+ {0, 1}, /* CMD5 */
+ {0, 1}, /* CMD6 */
+ {0, 1}, /* CMD7 */
+ {1, 1}, /* CMD8 */
+ {0, 2}, /* CMD9 */
+ {0, 2}, /* CMD10 */
+ {1, 1}, /* CMD11 */
+ {0, 1}, /* CMD12 */
+ {0, 1}, /* CMD13 */
+ {1, 1}, /* CMD14 */
+ {0, 0}, /* CMD15 */
+ {0, 1}, /* CMD16 */
+ {1, 1}, /* CMD17 */
+ {1, 1}, /* CMD18 */
+ {3, 1}, /* CMD19 */
+ {2, 1}, /* CMD20 */
+ {0, 0}, /* CMD21 */
+ {0, 0}, /* CMD22 */
+ {0, 1}, /* CMD23 */
+ {2, 1}, /* CMD24 */
+ {2, 1}, /* CMD25 */
+ {2, 1}, /* CMD26 */
+ {2, 1}, /* CMD27 */
+ {0, 1}, /* CMD28 */
+ {0, 1}, /* CMD29 */
+ {1, 1}, /* CMD30 */
+ {1, 1}, /* CMD31 */
+ {0, 0}, /* CMD32 */
+ {0, 0}, /* CMD33 */
+ {0, 0}, /* CMD34 */
+ {0, 1}, /* CMD35 */
+ {0, 1}, /* CMD36 */
+ {0, 0}, /* CMD37 */
+ {0, 1}, /* CMD38 */
+ {0, 4}, /* CMD39 */
+ {0, 5}, /* CMD40 */
+ {0, 0}, /* CMD41 */
+ {2, 1}, /* CMD42 */
+ {0, 0}, /* CMD43 */
+ {0, 0}, /* CMD44 */
+ {0, 0}, /* CMD45 */
+ {0, 0}, /* CMD46 */
+ {0, 0}, /* CMD47 */
+ {0, 0}, /* CMD48 */
+ {0, 0}, /* CMD49 */
+ {0, 0}, /* CMD50 */
+ {0, 0}, /* CMD51 */
+ {0, 0}, /* CMD52 */
+ {0, 0}, /* CMD53 */
+ {0, 0}, /* CMD54 */
+ {0, 1}, /* CMD55 */
+ {0xff, 0xff}, /* CMD56 */
+ {0, 0}, /* CMD57 */
+ {0, 0}, /* CMD58 */
+ {0, 0}, /* CMD59 */
+ {0, 0}, /* CMD60 */
+ {0, 0}, /* CMD61 */
+ {0, 0}, /* CMD62 */
+ {0, 0} /* CMD63 */
+};
+
+static struct cvm_mmc_cr_mods cvm_mmc_get_cr_mods(struct mmc_command *cmd)
+{
+ struct cvm_mmc_cr_type *cr;
+ u8 hardware_ctype, hardware_rtype;
+ u8 desired_ctype = 0, desired_rtype = 0;
+ struct cvm_mmc_cr_mods r;
+
+ cr = cvm_mmc_cr_types + (cmd->opcode & 0x3f);
+ hardware_ctype = cr->ctype;
+ hardware_rtype = cr->rtype;
+ if (cmd->opcode == MMC_GEN_CMD)
+ hardware_ctype = (cmd->arg & 1) ? 1 : 2;
+
+ switch (mmc_cmd_type(cmd)) {
+ case MMC_CMD_ADTC:
+ desired_ctype = (cmd->data->flags & MMC_DATA_WRITE) ? 2 : 1;
+ break;
+ case MMC_CMD_AC:
+ case MMC_CMD_BC:
+ case MMC_CMD_BCR:
+ desired_ctype = 0;
+ break;
+ }
+
+ switch (mmc_resp_type(cmd)) {
+ case MMC_RSP_NONE:
+ desired_rtype = 0;
+ break;
+ case MMC_RSP_R1:/* MMC_RSP_R5, MMC_RSP_R6, MMC_RSP_R7 */
+ case MMC_RSP_R1B:
+ desired_rtype = 1;
+ break;
+ case MMC_RSP_R2:
+ desired_rtype = 2;
+ break;
+ case MMC_RSP_R3: /* MMC_RSP_R4 */
+ desired_rtype = 3;
+ break;
+ }
+ r.ctype_xor = desired_ctype ^ hardware_ctype;
+ r.rtype_xor = desired_rtype ^ hardware_rtype;
+ return r;
+}
+
+static void check_switch_errors(struct cvm_mmc_host *host)
+{
+ u64 emm_switch;
+
+ emm_switch = readq(host->base + MIO_EMM_SWITCH(host));
+ if (emm_switch & MIO_EMM_SWITCH_ERR0)
+ dev_err(host->dev, "Switch power class error\n");
+ if (emm_switch & MIO_EMM_SWITCH_ERR1)
+ dev_err(host->dev, "Switch hs timing error\n");
+ if (emm_switch & MIO_EMM_SWITCH_ERR2)
+ dev_err(host->dev, "Switch bus width error\n");
+}
+
+static void clear_bus_id(u64 *reg)
+{
+ u64 bus_id_mask = GENMASK_ULL(61, 60);
+
+ *reg &= ~bus_id_mask;
+}
+
+static void set_bus_id(u64 *reg, int bus_id)
+{
+ clear_bus_id(reg);
+ *reg |= FIELD_PREP(GENMASK(61, 60), bus_id);
+}
+
+static int get_bus_id(u64 reg)
+{
+ return FIELD_GET(GENMASK_ULL(61, 60), reg);
+}
+
+/*
+ * We never set the switch_exe bit since that would interfere
+ * with the commands send by the MMC core.
+ */
+static void do_switch(struct cvm_mmc_host *host, u64 emm_switch)
+{
+ int retries = 100;
+ u64 rsp_sts;
+ int bus_id;
+
+ /*
+ * Modes setting only taken from slot 0. Work around that hardware
+ * issue by first switching to slot 0.
+ */
+ bus_id = get_bus_id(emm_switch);
+ clear_bus_id(&emm_switch);
+ writeq(emm_switch, host->base + MIO_EMM_SWITCH(host));
+
+ set_bus_id(&emm_switch, bus_id);
+ writeq(emm_switch, host->base + MIO_EMM_SWITCH(host));
+
+ /* wait for the switch to finish */
+ do {
+ rsp_sts = readq(host->base + MIO_EMM_RSP_STS(host));
+ if (!(rsp_sts & MIO_EMM_RSP_STS_SWITCH_VAL))
+ break;
+ udelay(10);
+ } while (--retries);
+
+ check_switch_errors(host);
+}
+
+static bool switch_val_changed(struct cvm_mmc_slot *slot, u64 new_val)
+{
+ /* Match BUS_ID, HS_TIMING, BUS_WIDTH, POWER_CLASS, CLK_HI, CLK_LO */
+ u64 match = 0x3001070fffffffffull;
+
+ return (slot->cached_switch & match) != (new_val & match);
+}
+
+static void set_wdog(struct cvm_mmc_slot *slot, unsigned int ns)
+{
+ u64 timeout;
+
+ if (!slot->clock)
+ return;
+
+ if (ns)
+ timeout = (slot->clock * ns) / NSEC_PER_SEC;
+ else
+ timeout = (slot->clock * 850ull) / 1000ull;
+ writeq(timeout, slot->host->base + MIO_EMM_WDOG(slot->host));
+}
+
+static void cvm_mmc_reset_bus(struct cvm_mmc_slot *slot)
+{
+ struct cvm_mmc_host *host = slot->host;
+ u64 emm_switch, wdog;
+
+ emm_switch = readq(slot->host->base + MIO_EMM_SWITCH(host));
+ emm_switch &= ~(MIO_EMM_SWITCH_EXE | MIO_EMM_SWITCH_ERR0 |
+ MIO_EMM_SWITCH_ERR1 | MIO_EMM_SWITCH_ERR2);
+ set_bus_id(&emm_switch, slot->bus_id);
+
+ wdog = readq(slot->host->base + MIO_EMM_WDOG(host));
+ do_switch(slot->host, emm_switch);
+
+ slot->cached_switch = emm_switch;
+
+ msleep(20);
+
+ writeq(wdog, slot->host->base + MIO_EMM_WDOG(host));
+}
+
+/* Switch to another slot if needed */
+static void cvm_mmc_switch_to(struct cvm_mmc_slot *slot)
+{
+ struct cvm_mmc_host *host = slot->host;
+ struct cvm_mmc_slot *old_slot;
+ u64 emm_sample, emm_switch;
+
+ if (slot->bus_id == host->last_slot)
+ return;
+
+ if (host->last_slot >= 0 && host->slot[host->last_slot]) {
+ old_slot = host->slot[host->last_slot];
+ old_slot->cached_switch = readq(host->base + MIO_EMM_SWITCH(host));
+ old_slot->cached_rca = readq(host->base + MIO_EMM_RCA(host));
+ }
+
+ writeq(slot->cached_rca, host->base + MIO_EMM_RCA(host));
+ emm_switch = slot->cached_switch;
+ set_bus_id(&emm_switch, slot->bus_id);
+ do_switch(host, emm_switch);
+
+ emm_sample = FIELD_PREP(MIO_EMM_SAMPLE_CMD_CNT, slot->cmd_cnt) |
+ FIELD_PREP(MIO_EMM_SAMPLE_DAT_CNT, slot->dat_cnt);
+ writeq(emm_sample, host->base + MIO_EMM_SAMPLE(host));
+
+ host->last_slot = slot->bus_id;
+}
+
+static void do_read(struct cvm_mmc_host *host, struct mmc_request *req,
+ u64 dbuf)
+{
+ struct sg_mapping_iter *smi = &host->smi;
+ int data_len = req->data->blocks * req->data->blksz;
+ int bytes_xfered, shift = -1;
+ u64 dat = 0;
+
+ /* Auto inc from offset zero */
+ writeq((0x10000 | (dbuf << 6)), host->base + MIO_EMM_BUF_IDX(host));
+
+ for (bytes_xfered = 0; bytes_xfered < data_len;) {
+ if (smi->consumed >= smi->length) {
+ if (!sg_miter_next(smi))
+ break;
+ smi->consumed = 0;
+ }
+
+ if (shift < 0) {
+ dat = readq(host->base + MIO_EMM_BUF_DAT(host));
+ shift = 56;
+ }
+
+ while (smi->consumed < smi->length && shift >= 0) {
+ ((u8 *)smi->addr)[smi->consumed] = (dat >> shift) & 0xff;
+ bytes_xfered++;
+ smi->consumed++;
+ shift -= 8;
+ }
+ }
+
+ sg_miter_stop(smi);
+ req->data->bytes_xfered = bytes_xfered;
+ req->data->error = 0;
+}
+
+static void do_write(struct mmc_request *req)
+{
+ req->data->bytes_xfered = req->data->blocks * req->data->blksz;
+ req->data->error = 0;
+}
+
+static void set_cmd_response(struct cvm_mmc_host *host, struct mmc_request *req,
+ u64 rsp_sts)
+{
+ u64 rsp_hi, rsp_lo;
+
+ if (!(rsp_sts & MIO_EMM_RSP_STS_RSP_VAL))
+ return;
+
+ rsp_lo = readq(host->base + MIO_EMM_RSP_LO(host));
+
+ switch (FIELD_GET(MIO_EMM_RSP_STS_RSP_TYPE, rsp_sts)) {
+ case 1:
+ case 3:
+ req->cmd->resp[0] = (rsp_lo >> 8) & 0xffffffff;
+ req->cmd->resp[1] = 0;
+ req->cmd->resp[2] = 0;
+ req->cmd->resp[3] = 0;
+ break;
+ case 2:
+ req->cmd->resp[3] = rsp_lo & 0xffffffff;
+ req->cmd->resp[2] = (rsp_lo >> 32) & 0xffffffff;
+ rsp_hi = readq(host->base + MIO_EMM_RSP_HI(host));
+ req->cmd->resp[1] = rsp_hi & 0xffffffff;
+ req->cmd->resp[0] = (rsp_hi >> 32) & 0xffffffff;
+ break;
+ }
+}
+
+static int get_dma_dir(struct mmc_data *data)
+{
+ return (data->flags & MMC_DATA_WRITE) ? DMA_TO_DEVICE : DMA_FROM_DEVICE;
+}
+
+static int finish_dma_single(struct cvm_mmc_host *host, struct mmc_data *data)
+{
+ data->bytes_xfered = data->blocks * data->blksz;
+ data->error = 0;
+ dma_unmap_sg(host->dev, data->sg, data->sg_len, get_dma_dir(data));
+ return 1;
+}
+
+static int finish_dma_sg(struct cvm_mmc_host *host, struct mmc_data *data)
+{
+ u64 fifo_cfg;
+ int count;
+
+ /* Check if there are any pending requests left */
+ fifo_cfg = readq(host->dma_base + MIO_EMM_DMA_FIFO_CFG(host));
+ count = FIELD_GET(MIO_EMM_DMA_FIFO_CFG_COUNT, fifo_cfg);
+ if (count)
+ dev_err(host->dev, "%u requests still pending\n", count);
+
+ data->bytes_xfered = data->blocks * data->blksz;
+ data->error = 0;
+
+ /* Clear and disable FIFO */
+ writeq(BIT_ULL(16), host->dma_base + MIO_EMM_DMA_FIFO_CFG(host));
+ dma_unmap_sg(host->dev, data->sg, data->sg_len, get_dma_dir(data));
+ return 1;
+}
+
+static int finish_dma(struct cvm_mmc_host *host, struct mmc_data *data)
+{
+ if (host->use_sg && data->sg_len > 1)
+ return finish_dma_sg(host, data);
+ else
+ return finish_dma_single(host, data);
+}
+
+static int check_status(u64 rsp_sts)
+{
+ if (rsp_sts & MIO_EMM_RSP_STS_RSP_BAD_STS ||
+ rsp_sts & MIO_EMM_RSP_STS_RSP_CRC_ERR ||
+ rsp_sts & MIO_EMM_RSP_STS_BLK_CRC_ERR)
+ return -EILSEQ;
+ if (rsp_sts & MIO_EMM_RSP_STS_RSP_TIMEOUT ||
+ rsp_sts & MIO_EMM_RSP_STS_BLK_TIMEOUT)
+ return -ETIMEDOUT;
+ if (rsp_sts & MIO_EMM_RSP_STS_DBUF_ERR)
+ return -EIO;
+ return 0;
+}
+
+/* Try to clean up failed DMA. */
+static void cleanup_dma(struct cvm_mmc_host *host, u64 rsp_sts)
+{
+ u64 emm_dma;
+
+ emm_dma = readq(host->base + MIO_EMM_DMA(host));
+ emm_dma |= FIELD_PREP(MIO_EMM_DMA_VAL, 1) |
+ FIELD_PREP(MIO_EMM_DMA_DAT_NULL, 1);
+ set_bus_id(&emm_dma, get_bus_id(rsp_sts));
+ writeq(emm_dma, host->base + MIO_EMM_DMA(host));
+}
+
+irqreturn_t cvm_mmc_interrupt(int irq, void *dev_id)
+{
+ struct cvm_mmc_host *host = dev_id;
+ struct mmc_request *req;
+ u64 emm_int, rsp_sts;
+ bool host_done;
+
+ if (host->need_irq_handler_lock)
+ spin_lock(&host->irq_handler_lock);
+ else
+ __acquire(&host->irq_handler_lock);
+
+ /* Clear interrupt bits (write 1 clears ). */
+ emm_int = readq(host->base + MIO_EMM_INT(host));
+ writeq(emm_int, host->base + MIO_EMM_INT(host));
+
+ if (emm_int & MIO_EMM_INT_SWITCH_ERR)
+ check_switch_errors(host);
+
+ req = host->current_req;
+ if (!req)
+ goto out;
+
+ rsp_sts = readq(host->base + MIO_EMM_RSP_STS(host));
+ /*
+ * dma_val set means DMA is still in progress. Don't touch
+ * the request and wait for the interrupt indicating that
+ * the DMA is finished.
+ */
+ if ((rsp_sts & MIO_EMM_RSP_STS_DMA_VAL) && host->dma_active)
+ goto out;
+
+ if (!host->dma_active && req->data &&
+ (emm_int & MIO_EMM_INT_BUF_DONE)) {
+ unsigned int type = (rsp_sts >> 7) & 3;
+
+ if (type == 1)
+ do_read(host, req, rsp_sts & MIO_EMM_RSP_STS_DBUF);
+ else if (type == 2)
+ do_write(req);
+ }
+
+ host_done = emm_int & MIO_EMM_INT_CMD_DONE ||
+ emm_int & MIO_EMM_INT_DMA_DONE ||
+ emm_int & MIO_EMM_INT_CMD_ERR ||
+ emm_int & MIO_EMM_INT_DMA_ERR;
+
+ if (!(host_done && req->done))
+ goto no_req_done;
+
+ req->cmd->error = check_status(rsp_sts);
+
+ if (host->dma_active && req->data)
+ if (!finish_dma(host, req->data))
+ goto no_req_done;
+
+ set_cmd_response(host, req, rsp_sts);
+ if ((emm_int & MIO_EMM_INT_DMA_ERR) &&
+ (rsp_sts & MIO_EMM_RSP_STS_DMA_PEND))
+ cleanup_dma(host, rsp_sts);
+
+ host->current_req = NULL;
+ req->done(req);
+
+no_req_done:
+ if (host->dmar_fixup_done)
+ host->dmar_fixup_done(host);
+ if (host_done)
+ host->release_bus(host);
+out:
+ if (host->need_irq_handler_lock)
+ spin_unlock(&host->irq_handler_lock);
+ else
+ __release(&host->irq_handler_lock);
+ return IRQ_RETVAL(emm_int != 0);
+}
+
+/*
+ * Program DMA_CFG and if needed DMA_ADR.
+ * Returns 0 on error, DMA address otherwise.
+ */
+static u64 prepare_dma_single(struct cvm_mmc_host *host, struct mmc_data *data)
+{
+ u64 dma_cfg, addr;
+ int count, rw;
+
+ count = dma_map_sg(host->dev, data->sg, data->sg_len,
+ get_dma_dir(data));
+ if (!count)
+ return 0;
+
+ rw = (data->flags & MMC_DATA_WRITE) ? 1 : 0;
+ dma_cfg = FIELD_PREP(MIO_EMM_DMA_CFG_EN, 1) |
+ FIELD_PREP(MIO_EMM_DMA_CFG_RW, rw);
+#ifdef __LITTLE_ENDIAN
+ dma_cfg |= FIELD_PREP(MIO_EMM_DMA_CFG_ENDIAN, 1);
+#endif
+ dma_cfg |= FIELD_PREP(MIO_EMM_DMA_CFG_SIZE,
+ (sg_dma_len(&data->sg[0]) / 8) - 1);
+
+ addr = sg_dma_address(&data->sg[0]);
+ if (!host->big_dma_addr)
+ dma_cfg |= FIELD_PREP(MIO_EMM_DMA_CFG_ADR, addr);
+ writeq(dma_cfg, host->dma_base + MIO_EMM_DMA_CFG(host));
+
+ pr_debug("[%s] sg_dma_len: %u total sg_elem: %d\n",
+ (rw) ? "W" : "R", sg_dma_len(&data->sg[0]), count);
+
+ if (host->big_dma_addr)
+ writeq(addr, host->dma_base + MIO_EMM_DMA_ADR(host));
+ return addr;
+}
+
+/*
+ * Queue complete sg list into the FIFO.
+ * Returns 0 on error, 1 otherwise.
+ */
+static u64 prepare_dma_sg(struct cvm_mmc_host *host, struct mmc_data *data)
+{
+ struct scatterlist *sg;
+ u64 fifo_cmd, addr;
+ int count, i, rw;
+
+ count = dma_map_sg(host->dev, data->sg, data->sg_len,
+ get_dma_dir(data));
+ if (!count)
+ return 0;
+ if (count > 16)
+ goto error;
+
+ /* Enable FIFO by removing CLR bit */
+ writeq(0, host->dma_base + MIO_EMM_DMA_FIFO_CFG(host));
+
+ for_each_sg(data->sg, sg, count, i) {
+ /* Program DMA address */
+ addr = sg_dma_address(sg);
+ if (addr & 7)
+ goto error;
+ writeq(addr, host->dma_base + MIO_EMM_DMA_FIFO_ADR(host));
+
+ /*
+ * If we have scatter-gather support we also have an extra
+ * register for the DMA addr, so no need to check
+ * host->big_dma_addr here.
+ */
+ rw = (data->flags & MMC_DATA_WRITE) ? 1 : 0;
+ fifo_cmd = FIELD_PREP(MIO_EMM_DMA_FIFO_CMD_RW, rw);
+
+ /* enable interrupts on the last element */
+ fifo_cmd |= FIELD_PREP(MIO_EMM_DMA_FIFO_CMD_INTDIS,
+ (i + 1 == count) ? 0 : 1);
+
+#ifdef __LITTLE_ENDIAN
+ fifo_cmd |= FIELD_PREP(MIO_EMM_DMA_FIFO_CMD_ENDIAN, 1);
+#endif
+ fifo_cmd |= FIELD_PREP(MIO_EMM_DMA_FIFO_CMD_SIZE,
+ sg_dma_len(sg) / 8 - 1);
+ /*
+ * The write copies the address and the command to the FIFO
+ * and increments the FIFO's COUNT field.
+ */
+ writeq(fifo_cmd, host->dma_base + MIO_EMM_DMA_FIFO_CMD(host));
+ pr_debug("[%s] sg_dma_len: %u sg_elem: %d/%d\n",
+ (rw) ? "W" : "R", sg_dma_len(sg), i, count);
+ }
+
+ /*
+ * In difference to prepare_dma_single we don't return the
+ * address here, as it would not make sense for scatter-gather.
+ * The dma fixup is only required on models that don't support
+ * scatter-gather, so that is not a problem.
+ */
+ return 1;
+
+error:
+ WARN_ON_ONCE(1);
+ dma_unmap_sg(host->dev, data->sg, data->sg_len, get_dma_dir(data));
+ /* Disable FIFO */
+ writeq(BIT_ULL(16), host->dma_base + MIO_EMM_DMA_FIFO_CFG(host));
+ return 0;
+}
+
+static u64 prepare_dma(struct cvm_mmc_host *host, struct mmc_data *data)
+{
+ if (host->use_sg && data->sg_len > 1)
+ return prepare_dma_sg(host, data);
+ else
+ return prepare_dma_single(host, data);
+}
+
+static u64 prepare_ext_dma(struct mmc_host *mmc, struct mmc_request *mrq)
+{
+ struct cvm_mmc_slot *slot = mmc_priv(mmc);
+ u64 emm_dma;
+
+ emm_dma = FIELD_PREP(MIO_EMM_DMA_VAL, 1) |
+ FIELD_PREP(MIO_EMM_DMA_SECTOR,
+ mmc_card_is_blockaddr(mmc->card) ? 1 : 0) |
+ FIELD_PREP(MIO_EMM_DMA_RW,
+ (mrq->data->flags & MMC_DATA_WRITE) ? 1 : 0) |
+ FIELD_PREP(MIO_EMM_DMA_BLOCK_CNT, mrq->data->blocks) |
+ FIELD_PREP(MIO_EMM_DMA_CARD_ADDR, mrq->cmd->arg);
+ set_bus_id(&emm_dma, slot->bus_id);
+
+ if (mmc_card_mmc(mmc->card) || (mmc_card_sd(mmc->card) &&
+ (mmc->card->scr.cmds & SD_SCR_CMD23_SUPPORT)))
+ emm_dma |= FIELD_PREP(MIO_EMM_DMA_MULTI, 1);
+
+ pr_debug("[%s] blocks: %u multi: %d\n",
+ (emm_dma & MIO_EMM_DMA_RW) ? "W" : "R",
+ mrq->data->blocks, (emm_dma & MIO_EMM_DMA_MULTI) ? 1 : 0);
+ return emm_dma;
+}
+
+static void cvm_mmc_dma_request(struct mmc_host *mmc,
+ struct mmc_request *mrq)
+{
+ struct cvm_mmc_slot *slot = mmc_priv(mmc);
+ struct cvm_mmc_host *host = slot->host;
+ struct mmc_data *data;
+ u64 emm_dma, addr;
+
+ if (!mrq->data || !mrq->data->sg || !mrq->data->sg_len ||
+ !mrq->stop || mrq->stop->opcode != MMC_STOP_TRANSMISSION) {
+ dev_err(&mmc->card->dev, "Error: %s no data\n", __func__);
+ goto error;
+ }
+
+ cvm_mmc_switch_to(slot);
+
+ data = mrq->data;
+ pr_debug("DMA request blocks: %d block_size: %d total_size: %d\n",
+ data->blocks, data->blksz, data->blocks * data->blksz);
+ if (data->timeout_ns)
+ set_wdog(slot, data->timeout_ns);
+
+ WARN_ON(host->current_req);
+ host->current_req = mrq;
+
+ emm_dma = prepare_ext_dma(mmc, mrq);
+ addr = prepare_dma(host, data);
+ if (!addr) {
+ dev_err(host->dev, "prepare_dma failed\n");
+ goto error;
+ }
+
+ host->dma_active = true;
+ host->int_enable(host, MIO_EMM_INT_CMD_ERR | MIO_EMM_INT_DMA_DONE |
+ MIO_EMM_INT_DMA_ERR);
+
+ if (host->dmar_fixup)
+ host->dmar_fixup(host, mrq->cmd, data, addr);
+
+ /*
+ * If we have a valid SD card in the slot, we set the response
+ * bit mask to check for CRC errors and timeouts only.
+ * Otherwise, use the default power reset value.
+ */
+ if (mmc_card_sd(mmc->card))
+ writeq(0x00b00000ull, host->base + MIO_EMM_STS_MASK(host));
+ else
+ writeq(0xe4390080ull, host->base + MIO_EMM_STS_MASK(host));
+ writeq(emm_dma, host->base + MIO_EMM_DMA(host));
+ return;
+
+error:
+ mrq->cmd->error = -EINVAL;
+ if (mrq->done)
+ mrq->done(mrq);
+ host->release_bus(host);
+}
+
+static void do_read_request(struct cvm_mmc_host *host, struct mmc_request *mrq)
+{
+ sg_miter_start(&host->smi, mrq->data->sg, mrq->data->sg_len,
+ SG_MITER_ATOMIC | SG_MITER_TO_SG);
+}
+
+static void do_write_request(struct cvm_mmc_host *host, struct mmc_request *mrq)
+{
+ unsigned int data_len = mrq->data->blocks * mrq->data->blksz;
+ struct sg_mapping_iter *smi = &host->smi;
+ unsigned int bytes_xfered;
+ int shift = 56;
+ u64 dat = 0;
+
+ /* Copy data to the xmit buffer before issuing the command. */
+ sg_miter_start(smi, mrq->data->sg, mrq->data->sg_len, SG_MITER_FROM_SG);
+
+ /* Auto inc from offset zero, dbuf zero */
+ writeq(0x10000ull, host->base + MIO_EMM_BUF_IDX(host));
+
+ for (bytes_xfered = 0; bytes_xfered < data_len;) {
+ if (smi->consumed >= smi->length) {
+ if (!sg_miter_next(smi))
+ break;
+ smi->consumed = 0;
+ }
+
+ while (smi->consumed < smi->length && shift >= 0) {
+ dat |= (u64)((u8 *)smi->addr)[smi->consumed] << shift;
+ bytes_xfered++;
+ smi->consumed++;
+ shift -= 8;
+ }
+
+ if (shift < 0) {
+ writeq(dat, host->base + MIO_EMM_BUF_DAT(host));
+ shift = 56;
+ dat = 0;
+ }
+ }
+ sg_miter_stop(smi);
+}
+
+static void cvm_mmc_request(struct mmc_host *mmc, struct mmc_request *mrq)
+{
+ struct cvm_mmc_slot *slot = mmc_priv(mmc);
+ struct cvm_mmc_host *host = slot->host;
+ struct mmc_command *cmd = mrq->cmd;
+ struct cvm_mmc_cr_mods mods;
+ u64 emm_cmd, rsp_sts;
+ int retries = 100;
+
+ /*
+ * Note about locking:
+ * All MMC devices share the same bus and controller. Allow only a
+ * single user of the bootbus/MMC bus at a time. The lock is acquired
+ * on all entry points from the MMC layer.
+ *
+ * For requests the lock is only released after the completion
+ * interrupt!
+ */
+ host->acquire_bus(host);
+
+ if (cmd->opcode == MMC_READ_MULTIPLE_BLOCK ||
+ cmd->opcode == MMC_WRITE_MULTIPLE_BLOCK)
+ return cvm_mmc_dma_request(mmc, mrq);
+
+ cvm_mmc_switch_to(slot);
+
+ mods = cvm_mmc_get_cr_mods(cmd);
+
+ WARN_ON(host->current_req);
+ host->current_req = mrq;
+
+ if (cmd->data) {
+ if (cmd->data->flags & MMC_DATA_READ)
+ do_read_request(host, mrq);
+ else
+ do_write_request(host, mrq);
+
+ if (cmd->data->timeout_ns)
+ set_wdog(slot, cmd->data->timeout_ns);
+ } else
+ set_wdog(slot, 0);
+
+ host->dma_active = false;
+ host->int_enable(host, MIO_EMM_INT_CMD_DONE | MIO_EMM_INT_CMD_ERR);
+
+ emm_cmd = FIELD_PREP(MIO_EMM_CMD_VAL, 1) |
+ FIELD_PREP(MIO_EMM_CMD_CTYPE_XOR, mods.ctype_xor) |
+ FIELD_PREP(MIO_EMM_CMD_RTYPE_XOR, mods.rtype_xor) |
+ FIELD_PREP(MIO_EMM_CMD_IDX, cmd->opcode) |
+ FIELD_PREP(MIO_EMM_CMD_ARG, cmd->arg);
+ set_bus_id(&emm_cmd, slot->bus_id);
+ if (cmd->data && mmc_cmd_type(cmd) == MMC_CMD_ADTC)
+ emm_cmd |= FIELD_PREP(MIO_EMM_CMD_OFFSET,
+ 64 - ((cmd->data->blocks * cmd->data->blksz) / 8));
+
+ writeq(0, host->base + MIO_EMM_STS_MASK(host));
+
+retry:
+ rsp_sts = readq(host->base + MIO_EMM_RSP_STS(host));
+ if (rsp_sts & MIO_EMM_RSP_STS_DMA_VAL ||
+ rsp_sts & MIO_EMM_RSP_STS_CMD_VAL ||
+ rsp_sts & MIO_EMM_RSP_STS_SWITCH_VAL ||
+ rsp_sts & MIO_EMM_RSP_STS_DMA_PEND) {
+ udelay(10);
+ if (--retries)
+ goto retry;
+ }
+ if (!retries)
+ dev_err(host->dev, "Bad status: %llx before command write\n", rsp_sts);
+ writeq(emm_cmd, host->base + MIO_EMM_CMD(host));
+}
+
+static void cvm_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
+{
+ struct cvm_mmc_slot *slot = mmc_priv(mmc);
+ struct cvm_mmc_host *host = slot->host;
+ int clk_period = 0, power_class = 10, bus_width = 0;
+ u64 clock, emm_switch;
+
+ host->acquire_bus(host);
+ cvm_mmc_switch_to(slot);
+
+ /* Set the power state */
+ switch (ios->power_mode) {
+ case MMC_POWER_ON:
+ break;
+
+ case MMC_POWER_OFF:
+ cvm_mmc_reset_bus(slot);
+ if (host->global_pwr_gpiod)
+ host->set_shared_power(host, 0);
+ else if (!IS_ERR(mmc->supply.vmmc))
+ mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, 0);
+ break;
+
+ case MMC_POWER_UP:
+ if (host->global_pwr_gpiod)
+ host->set_shared_power(host, 1);
+ else if (!IS_ERR(mmc->supply.vmmc))
+ mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, ios->vdd);
+ break;
+ }
+
+ /* Convert bus width to HW definition */
+ switch (ios->bus_width) {
+ case MMC_BUS_WIDTH_8:
+ bus_width = 2;
+ break;
+ case MMC_BUS_WIDTH_4:
+ bus_width = 1;
+ break;
+ case MMC_BUS_WIDTH_1:
+ bus_width = 0;
+ break;
+ }
+
+ /* DDR is available for 4/8 bit bus width */
+ if (ios->bus_width && ios->timing == MMC_TIMING_MMC_DDR52)
+ bus_width |= 4;
+
+ /* Change the clock frequency. */
+ clock = ios->clock;
+ if (clock > 52000000)
+ clock = 52000000;
+ slot->clock = clock;
+
+ if (clock)
+ clk_period = (host->sys_freq + clock - 1) / (2 * clock);
+
+ emm_switch = FIELD_PREP(MIO_EMM_SWITCH_HS_TIMING,
+ (ios->timing == MMC_TIMING_MMC_HS)) |
+ FIELD_PREP(MIO_EMM_SWITCH_BUS_WIDTH, bus_width) |
+ FIELD_PREP(MIO_EMM_SWITCH_POWER_CLASS, power_class) |
+ FIELD_PREP(MIO_EMM_SWITCH_CLK_HI, clk_period) |
+ FIELD_PREP(MIO_EMM_SWITCH_CLK_LO, clk_period);
+ set_bus_id(&emm_switch, slot->bus_id);
+
+ if (!switch_val_changed(slot, emm_switch))
+ goto out;
+
+ set_wdog(slot, 0);
+ do_switch(host, emm_switch);
+ slot->cached_switch = emm_switch;
+out:
+ host->release_bus(host);
+}
+
+static const struct mmc_host_ops cvm_mmc_ops = {
+ .request = cvm_mmc_request,
+ .set_ios = cvm_mmc_set_ios,
+ .get_ro = mmc_gpio_get_ro,
+ .get_cd = mmc_gpio_get_cd,
+};
+
+static void cvm_mmc_set_clock(struct cvm_mmc_slot *slot, unsigned int clock)
+{
+ struct mmc_host *mmc = slot->mmc;
+
+ clock = min(clock, mmc->f_max);
+ clock = max(clock, mmc->f_min);
+ slot->clock = clock;
+}
+
+static int cvm_mmc_init_lowlevel(struct cvm_mmc_slot *slot)
+{
+ struct cvm_mmc_host *host = slot->host;
+ u64 emm_switch;
+
+ /* Enable this bus slot. */
+ host->emm_cfg |= (1ull << slot->bus_id);
+ writeq(host->emm_cfg, slot->host->base + MIO_EMM_CFG(host));
+ udelay(10);
+
+ /* Program initial clock speed and power. */
+ cvm_mmc_set_clock(slot, slot->mmc->f_min);
+ emm_switch = FIELD_PREP(MIO_EMM_SWITCH_POWER_CLASS, 10);
+ emm_switch |= FIELD_PREP(MIO_EMM_SWITCH_CLK_HI,
+ (host->sys_freq / slot->clock) / 2);
+ emm_switch |= FIELD_PREP(MIO_EMM_SWITCH_CLK_LO,
+ (host->sys_freq / slot->clock) / 2);
+
+ /* Make the changes take effect on this bus slot. */
+ set_bus_id(&emm_switch, slot->bus_id);
+ do_switch(host, emm_switch);
+
+ slot->cached_switch = emm_switch;
+
+ /*
+ * Set watchdog timeout value and default reset value
+ * for the mask register. Finally, set the CARD_RCA
+ * bit so that we can get the card address relative
+ * to the CMD register for CMD7 transactions.
+ */
+ set_wdog(slot, 0);
+ writeq(0xe4390080ull, host->base + MIO_EMM_STS_MASK(host));
+ writeq(1, host->base + MIO_EMM_RCA(host));
+ return 0;
+}
+
+static int cvm_mmc_of_parse(struct device *dev, struct cvm_mmc_slot *slot)
+{
+ u32 id, cmd_skew = 0, dat_skew = 0, bus_width = 0;
+ struct device_node *node = dev->of_node;
+ struct mmc_host *mmc = slot->mmc;
+ u64 clock_period;
+ int ret;
+
+ ret = of_property_read_u32(node, "reg", &id);
+ if (ret) {
+ dev_err(dev, "Missing or invalid reg property on %pOF\n", node);
+ return ret;
+ }
+
+ if (id >= CAVIUM_MAX_MMC || slot->host->slot[id]) {
+ dev_err(dev, "Invalid reg property on %pOF\n", node);
+ return -EINVAL;
+ }
+
+ ret = mmc_regulator_get_supply(mmc);
+ if (ret)
+ return ret;
+ /*
+ * Legacy Octeon firmware has no regulator entry, fall-back to
+ * a hard-coded voltage to get a sane OCR.
+ */
+ if (IS_ERR(mmc->supply.vmmc))
+ mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
+
+ /* Common MMC bindings */
+ ret = mmc_of_parse(mmc);
+ if (ret)
+ return ret;
+
+ /* Set bus width */
+ if (!(mmc->caps & (MMC_CAP_8_BIT_DATA | MMC_CAP_4_BIT_DATA))) {
+ of_property_read_u32(node, "cavium,bus-max-width", &bus_width);
+ if (bus_width == 8)
+ mmc->caps |= MMC_CAP_8_BIT_DATA | MMC_CAP_4_BIT_DATA;
+ else if (bus_width == 4)
+ mmc->caps |= MMC_CAP_4_BIT_DATA;
+ }
+
+ /* Set maximum and minimum frequency */
+ if (!mmc->f_max)
+ of_property_read_u32(node, "spi-max-frequency", &mmc->f_max);
+ if (!mmc->f_max || mmc->f_max > 52000000)
+ mmc->f_max = 52000000;
+ mmc->f_min = 400000;
+
+ /* Sampling register settings, period in picoseconds */
+ clock_period = 1000000000000ull / slot->host->sys_freq;
+ of_property_read_u32(node, "cavium,cmd-clk-skew", &cmd_skew);
+ of_property_read_u32(node, "cavium,dat-clk-skew", &dat_skew);
+ slot->cmd_cnt = (cmd_skew + clock_period / 2) / clock_period;
+ slot->dat_cnt = (dat_skew + clock_period / 2) / clock_period;
+
+ return id;
+}
+
+int cvm_mmc_of_slot_probe(struct device *dev, struct cvm_mmc_host *host)
+{
+ struct cvm_mmc_slot *slot;
+ struct mmc_host *mmc;
+ int ret, id;
+
+ mmc = mmc_alloc_host(sizeof(struct cvm_mmc_slot), dev);
+ if (!mmc)
+ return -ENOMEM;
+
+ slot = mmc_priv(mmc);
+ slot->mmc = mmc;
+ slot->host = host;
+
+ ret = cvm_mmc_of_parse(dev, slot);
+ if (ret < 0)
+ goto error;
+ id = ret;
+
+ /* Set up host parameters */
+ mmc->ops = &cvm_mmc_ops;
+
+ /*
+ * We only have a 3.3v supply, we cannot support any
+ * of the UHS modes. We do support the high speed DDR
+ * modes up to 52MHz.
+ *
+ * Disable bounce buffers for max_segs = 1
+ */
+ mmc->caps |= MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED |
+ MMC_CAP_CMD23 | MMC_CAP_POWER_OFF_CARD | MMC_CAP_3_3V_DDR;
+
+ if (host->use_sg)
+ mmc->max_segs = 16;
+ else
+ mmc->max_segs = 1;
+
+ /* DMA size field can address up to 8 MB */
+ mmc->max_seg_size = min_t(unsigned int, 8 * 1024 * 1024,
+ dma_get_max_seg_size(host->dev));
+ mmc->max_req_size = mmc->max_seg_size;
+ /* External DMA is in 512 byte blocks */
+ mmc->max_blk_size = 512;
+ /* DMA block count field is 15 bits */
+ mmc->max_blk_count = 32767;
+
+ slot->clock = mmc->f_min;
+ slot->bus_id = id;
+ slot->cached_rca = 1;
+
+ host->acquire_bus(host);
+ host->slot[id] = slot;
+ cvm_mmc_switch_to(slot);
+ cvm_mmc_init_lowlevel(slot);
+ host->release_bus(host);
+
+ ret = mmc_add_host(mmc);
+ if (ret) {
+ dev_err(dev, "mmc_add_host() returned %d\n", ret);
+ slot->host->slot[id] = NULL;
+ goto error;
+ }
+ return 0;
+
+error:
+ mmc_free_host(slot->mmc);
+ return ret;
+}
+
+int cvm_mmc_of_slot_remove(struct cvm_mmc_slot *slot)
+{
+ mmc_remove_host(slot->mmc);
+ slot->host->slot[slot->bus_id] = NULL;
+ mmc_free_host(slot->mmc);
+ return 0;
+}
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-14 00:07:32 +0000