summaryrefslogtreecommitdiffstats
path: root/drivers/mmc/host/meson-gx-mmc.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/mmc/host/meson-gx-mmc.c')
-rw-r--r--drivers/mmc/host/meson-gx-mmc.c1349
1 files changed, 1349 insertions, 0 deletions
diff --git a/drivers/mmc/host/meson-gx-mmc.c b/drivers/mmc/host/meson-gx-mmc.c
new file mode 100644
index 0000000000..c7c067b941
--- /dev/null
+++ b/drivers/mmc/host/meson-gx-mmc.c
@@ -0,0 +1,1349 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Amlogic SD/eMMC driver for the GX/S905 family SoCs
+ *
+ * Copyright (c) 2016 BayLibre, SAS.
+ * Author: Kevin Hilman <khilman@baylibre.com>
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/iopoll.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/ioport.h>
+#include <linux/dma-mapping.h>
+#include <linux/mmc/host.h>
+#include <linux/mmc/mmc.h>
+#include <linux/mmc/sdio.h>
+#include <linux/mmc/slot-gpio.h>
+#include <linux/io.h>
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/regulator/consumer.h>
+#include <linux/reset.h>
+#include <linux/interrupt.h>
+#include <linux/bitfield.h>
+#include <linux/pinctrl/consumer.h>
+
+#define DRIVER_NAME "meson-gx-mmc"
+
+#define SD_EMMC_CLOCK 0x0
+#define CLK_DIV_MASK GENMASK(5, 0)
+#define CLK_SRC_MASK GENMASK(7, 6)
+#define CLK_CORE_PHASE_MASK GENMASK(9, 8)
+#define CLK_TX_PHASE_MASK GENMASK(11, 10)
+#define CLK_RX_PHASE_MASK GENMASK(13, 12)
+#define CLK_PHASE_0 0
+#define CLK_PHASE_180 2
+#define CLK_V2_TX_DELAY_MASK GENMASK(19, 16)
+#define CLK_V2_RX_DELAY_MASK GENMASK(23, 20)
+#define CLK_V2_ALWAYS_ON BIT(24)
+#define CLK_V2_IRQ_SDIO_SLEEP BIT(25)
+
+#define CLK_V3_TX_DELAY_MASK GENMASK(21, 16)
+#define CLK_V3_RX_DELAY_MASK GENMASK(27, 22)
+#define CLK_V3_ALWAYS_ON BIT(28)
+#define CLK_V3_IRQ_SDIO_SLEEP BIT(29)
+
+#define CLK_TX_DELAY_MASK(h) (h->data->tx_delay_mask)
+#define CLK_RX_DELAY_MASK(h) (h->data->rx_delay_mask)
+#define CLK_ALWAYS_ON(h) (h->data->always_on)
+#define CLK_IRQ_SDIO_SLEEP(h) (h->data->irq_sdio_sleep)
+
+#define SD_EMMC_DELAY 0x4
+#define SD_EMMC_ADJUST 0x8
+#define ADJUST_ADJ_DELAY_MASK GENMASK(21, 16)
+#define ADJUST_DS_EN BIT(15)
+#define ADJUST_ADJ_EN BIT(13)
+
+#define SD_EMMC_DELAY1 0x4
+#define SD_EMMC_DELAY2 0x8
+#define SD_EMMC_V3_ADJUST 0xc
+
+#define SD_EMMC_CALOUT 0x10
+#define SD_EMMC_START 0x40
+#define START_DESC_INIT BIT(0)
+#define START_DESC_BUSY BIT(1)
+#define START_DESC_ADDR_MASK GENMASK(31, 2)
+
+#define SD_EMMC_CFG 0x44
+#define CFG_BUS_WIDTH_MASK GENMASK(1, 0)
+#define CFG_BUS_WIDTH_1 0x0
+#define CFG_BUS_WIDTH_4 0x1
+#define CFG_BUS_WIDTH_8 0x2
+#define CFG_DDR BIT(2)
+#define CFG_BLK_LEN_MASK GENMASK(7, 4)
+#define CFG_RESP_TIMEOUT_MASK GENMASK(11, 8)
+#define CFG_RC_CC_MASK GENMASK(15, 12)
+#define CFG_STOP_CLOCK BIT(22)
+#define CFG_CLK_ALWAYS_ON BIT(18)
+#define CFG_CHK_DS BIT(20)
+#define CFG_AUTO_CLK BIT(23)
+#define CFG_ERR_ABORT BIT(27)
+
+#define SD_EMMC_STATUS 0x48
+#define STATUS_BUSY BIT(31)
+#define STATUS_DESC_BUSY BIT(30)
+#define STATUS_DATI GENMASK(23, 16)
+
+#define SD_EMMC_IRQ_EN 0x4c
+#define IRQ_RXD_ERR_MASK GENMASK(7, 0)
+#define IRQ_TXD_ERR BIT(8)
+#define IRQ_DESC_ERR BIT(9)
+#define IRQ_RESP_ERR BIT(10)
+#define IRQ_CRC_ERR \
+ (IRQ_RXD_ERR_MASK | IRQ_TXD_ERR | IRQ_DESC_ERR | IRQ_RESP_ERR)
+#define IRQ_RESP_TIMEOUT BIT(11)
+#define IRQ_DESC_TIMEOUT BIT(12)
+#define IRQ_TIMEOUTS \
+ (IRQ_RESP_TIMEOUT | IRQ_DESC_TIMEOUT)
+#define IRQ_END_OF_CHAIN BIT(13)
+#define IRQ_RESP_STATUS BIT(14)
+#define IRQ_SDIO BIT(15)
+#define IRQ_EN_MASK \
+ (IRQ_CRC_ERR | IRQ_TIMEOUTS | IRQ_END_OF_CHAIN)
+
+#define SD_EMMC_CMD_CFG 0x50
+#define SD_EMMC_CMD_ARG 0x54
+#define SD_EMMC_CMD_DAT 0x58
+#define SD_EMMC_CMD_RSP 0x5c
+#define SD_EMMC_CMD_RSP1 0x60
+#define SD_EMMC_CMD_RSP2 0x64
+#define SD_EMMC_CMD_RSP3 0x68
+
+#define SD_EMMC_RXD 0x94
+#define SD_EMMC_TXD 0x94
+#define SD_EMMC_LAST_REG SD_EMMC_TXD
+
+#define SD_EMMC_SRAM_DATA_BUF_LEN 1536
+#define SD_EMMC_SRAM_DATA_BUF_OFF 0x200
+
+#define SD_EMMC_CFG_BLK_SIZE 512 /* internal buffer max: 512 bytes */
+#define SD_EMMC_CFG_RESP_TIMEOUT 256 /* in clock cycles */
+#define SD_EMMC_CMD_TIMEOUT 1024 /* in ms */
+#define SD_EMMC_CMD_TIMEOUT_DATA 4096 /* in ms */
+#define SD_EMMC_CFG_CMD_GAP 16 /* in clock cycles */
+#define SD_EMMC_DESC_BUF_LEN PAGE_SIZE
+
+#define SD_EMMC_PRE_REQ_DONE BIT(0)
+#define SD_EMMC_DESC_CHAIN_MODE BIT(1)
+
+#define MUX_CLK_NUM_PARENTS 2
+
+struct meson_mmc_data {
+ unsigned int tx_delay_mask;
+ unsigned int rx_delay_mask;
+ unsigned int always_on;
+ unsigned int adjust;
+ unsigned int irq_sdio_sleep;
+};
+
+struct sd_emmc_desc {
+ u32 cmd_cfg;
+ u32 cmd_arg;
+ u32 cmd_data;
+ u32 cmd_resp;
+};
+
+struct meson_host {
+ struct device *dev;
+ const struct meson_mmc_data *data;
+ struct mmc_host *mmc;
+ struct mmc_command *cmd;
+
+ void __iomem *regs;
+ struct clk *mux_clk;
+ struct clk *mmc_clk;
+ unsigned long req_rate;
+ bool ddr;
+
+ bool dram_access_quirk;
+
+ struct pinctrl *pinctrl;
+ struct pinctrl_state *pins_clk_gate;
+
+ unsigned int bounce_buf_size;
+ void *bounce_buf;
+ void __iomem *bounce_iomem_buf;
+ dma_addr_t bounce_dma_addr;
+ struct sd_emmc_desc *descs;
+ dma_addr_t descs_dma_addr;
+
+ int irq;
+
+ bool needs_pre_post_req;
+
+ spinlock_t lock;
+};
+
+#define CMD_CFG_LENGTH_MASK GENMASK(8, 0)
+#define CMD_CFG_BLOCK_MODE BIT(9)
+#define CMD_CFG_R1B BIT(10)
+#define CMD_CFG_END_OF_CHAIN BIT(11)
+#define CMD_CFG_TIMEOUT_MASK GENMASK(15, 12)
+#define CMD_CFG_NO_RESP BIT(16)
+#define CMD_CFG_NO_CMD BIT(17)
+#define CMD_CFG_DATA_IO BIT(18)
+#define CMD_CFG_DATA_WR BIT(19)
+#define CMD_CFG_RESP_NOCRC BIT(20)
+#define CMD_CFG_RESP_128 BIT(21)
+#define CMD_CFG_RESP_NUM BIT(22)
+#define CMD_CFG_DATA_NUM BIT(23)
+#define CMD_CFG_CMD_INDEX_MASK GENMASK(29, 24)
+#define CMD_CFG_ERROR BIT(30)
+#define CMD_CFG_OWNER BIT(31)
+
+#define CMD_DATA_MASK GENMASK(31, 2)
+#define CMD_DATA_BIG_ENDIAN BIT(1)
+#define CMD_DATA_SRAM BIT(0)
+#define CMD_RESP_MASK GENMASK(31, 1)
+#define CMD_RESP_SRAM BIT(0)
+
+static unsigned int meson_mmc_get_timeout_msecs(struct mmc_data *data)
+{
+ unsigned int timeout = data->timeout_ns / NSEC_PER_MSEC;
+
+ if (!timeout)
+ return SD_EMMC_CMD_TIMEOUT_DATA;
+
+ timeout = roundup_pow_of_two(timeout);
+
+ return min(timeout, 32768U); /* max. 2^15 ms */
+}
+
+static struct mmc_command *meson_mmc_get_next_command(struct mmc_command *cmd)
+{
+ if (cmd->opcode == MMC_SET_BLOCK_COUNT && !cmd->error)
+ return cmd->mrq->cmd;
+ else if (mmc_op_multi(cmd->opcode) &&
+ (!cmd->mrq->sbc || cmd->error || cmd->data->error))
+ return cmd->mrq->stop;
+ else
+ return NULL;
+}
+
+static void meson_mmc_get_transfer_mode(struct mmc_host *mmc,
+ struct mmc_request *mrq)
+{
+ struct meson_host *host = mmc_priv(mmc);
+ struct mmc_data *data = mrq->data;
+ struct scatterlist *sg;
+ int i;
+
+ /*
+ * When Controller DMA cannot directly access DDR memory, disable
+ * support for Chain Mode to directly use the internal SRAM using
+ * the bounce buffer mode.
+ */
+ if (host->dram_access_quirk)
+ return;
+
+ /* SD_IO_RW_EXTENDED (CMD53) can also use block mode under the hood */
+ if (data->blocks > 1 || mrq->cmd->opcode == SD_IO_RW_EXTENDED) {
+ /*
+ * In block mode DMA descriptor format, "length" field indicates
+ * number of blocks and there is no way to pass DMA size that
+ * is not multiple of SDIO block size, making it impossible to
+ * tie more than one memory buffer with single SDIO block.
+ * Block mode sg buffer size should be aligned with SDIO block
+ * size, otherwise chain mode could not be used.
+ */
+ for_each_sg(data->sg, sg, data->sg_len, i) {
+ if (sg->length % data->blksz) {
+ dev_warn_once(mmc_dev(mmc),
+ "unaligned sg len %u blksize %u, disabling descriptor DMA for transfer\n",
+ sg->length, data->blksz);
+ return;
+ }
+ }
+ }
+
+ for_each_sg(data->sg, sg, data->sg_len, i) {
+ /* check for 8 byte alignment */
+ if (sg->offset % 8) {
+ dev_warn_once(mmc_dev(mmc),
+ "unaligned sg offset %u, disabling descriptor DMA for transfer\n",
+ sg->offset);
+ return;
+ }
+ }
+
+ data->host_cookie |= SD_EMMC_DESC_CHAIN_MODE;
+}
+
+static inline bool meson_mmc_desc_chain_mode(const struct mmc_data *data)
+{
+ return data->host_cookie & SD_EMMC_DESC_CHAIN_MODE;
+}
+
+static inline bool meson_mmc_bounce_buf_read(const struct mmc_data *data)
+{
+ return data && data->flags & MMC_DATA_READ &&
+ !meson_mmc_desc_chain_mode(data);
+}
+
+static void meson_mmc_pre_req(struct mmc_host *mmc, struct mmc_request *mrq)
+{
+ struct mmc_data *data = mrq->data;
+
+ if (!data)
+ return;
+
+ meson_mmc_get_transfer_mode(mmc, mrq);
+ data->host_cookie |= SD_EMMC_PRE_REQ_DONE;
+
+ if (!meson_mmc_desc_chain_mode(data))
+ return;
+
+ data->sg_count = dma_map_sg(mmc_dev(mmc), data->sg, data->sg_len,
+ mmc_get_dma_dir(data));
+ if (!data->sg_count)
+ dev_err(mmc_dev(mmc), "dma_map_sg failed");
+}
+
+static void meson_mmc_post_req(struct mmc_host *mmc, struct mmc_request *mrq,
+ int err)
+{
+ struct mmc_data *data = mrq->data;
+
+ if (data && meson_mmc_desc_chain_mode(data) && data->sg_count)
+ dma_unmap_sg(mmc_dev(mmc), data->sg, data->sg_len,
+ mmc_get_dma_dir(data));
+}
+
+/*
+ * Gating the clock on this controller is tricky. It seems the mmc clock
+ * is also used by the controller. It may crash during some operation if the
+ * clock is stopped. The safest thing to do, whenever possible, is to keep
+ * clock running at stop it at the pad using the pinmux.
+ */
+static void meson_mmc_clk_gate(struct meson_host *host)
+{
+ u32 cfg;
+
+ if (host->pins_clk_gate) {
+ pinctrl_select_state(host->pinctrl, host->pins_clk_gate);
+ } else {
+ /*
+ * If the pinmux is not provided - default to the classic and
+ * unsafe method
+ */
+ cfg = readl(host->regs + SD_EMMC_CFG);
+ cfg |= CFG_STOP_CLOCK;
+ writel(cfg, host->regs + SD_EMMC_CFG);
+ }
+}
+
+static void meson_mmc_clk_ungate(struct meson_host *host)
+{
+ u32 cfg;
+
+ if (host->pins_clk_gate)
+ pinctrl_select_default_state(host->dev);
+
+ /* Make sure the clock is not stopped in the controller */
+ cfg = readl(host->regs + SD_EMMC_CFG);
+ cfg &= ~CFG_STOP_CLOCK;
+ writel(cfg, host->regs + SD_EMMC_CFG);
+}
+
+static int meson_mmc_clk_set(struct meson_host *host, unsigned long rate,
+ bool ddr)
+{
+ struct mmc_host *mmc = host->mmc;
+ int ret;
+ u32 cfg;
+
+ /* Same request - bail-out */
+ if (host->ddr == ddr && host->req_rate == rate)
+ return 0;
+
+ /* stop clock */
+ meson_mmc_clk_gate(host);
+ host->req_rate = 0;
+ mmc->actual_clock = 0;
+
+ /* return with clock being stopped */
+ if (!rate)
+ return 0;
+
+ /* Stop the clock during rate change to avoid glitches */
+ cfg = readl(host->regs + SD_EMMC_CFG);
+ cfg |= CFG_STOP_CLOCK;
+ writel(cfg, host->regs + SD_EMMC_CFG);
+
+ if (ddr) {
+ /* DDR modes require higher module clock */
+ rate <<= 1;
+ cfg |= CFG_DDR;
+ } else {
+ cfg &= ~CFG_DDR;
+ }
+ writel(cfg, host->regs + SD_EMMC_CFG);
+ host->ddr = ddr;
+
+ ret = clk_set_rate(host->mmc_clk, rate);
+ if (ret) {
+ dev_err(host->dev, "Unable to set cfg_div_clk to %lu. ret=%d\n",
+ rate, ret);
+ return ret;
+ }
+
+ host->req_rate = rate;
+ mmc->actual_clock = clk_get_rate(host->mmc_clk);
+
+ /* We should report the real output frequency of the controller */
+ if (ddr) {
+ host->req_rate >>= 1;
+ mmc->actual_clock >>= 1;
+ }
+
+ dev_dbg(host->dev, "clk rate: %u Hz\n", mmc->actual_clock);
+ if (rate != mmc->actual_clock)
+ dev_dbg(host->dev, "requested rate was %lu\n", rate);
+
+ /* (re)start clock */
+ meson_mmc_clk_ungate(host);
+
+ return 0;
+}
+
+/*
+ * The SD/eMMC IP block has an internal mux and divider used for
+ * generating the MMC clock. Use the clock framework to create and
+ * manage these clocks.
+ */
+static int meson_mmc_clk_init(struct meson_host *host)
+{
+ struct clk_init_data init;
+ struct clk_mux *mux;
+ struct clk_divider *div;
+ char clk_name[32];
+ int i, ret = 0;
+ const char *mux_parent_names[MUX_CLK_NUM_PARENTS];
+ const char *clk_parent[1];
+ u32 clk_reg;
+
+ /* init SD_EMMC_CLOCK to sane defaults w/min clock rate */
+ clk_reg = CLK_ALWAYS_ON(host);
+ clk_reg |= CLK_DIV_MASK;
+ clk_reg |= FIELD_PREP(CLK_CORE_PHASE_MASK, CLK_PHASE_180);
+ clk_reg |= FIELD_PREP(CLK_TX_PHASE_MASK, CLK_PHASE_0);
+ clk_reg |= FIELD_PREP(CLK_RX_PHASE_MASK, CLK_PHASE_0);
+ if (host->mmc->caps & MMC_CAP_SDIO_IRQ)
+ clk_reg |= CLK_IRQ_SDIO_SLEEP(host);
+ writel(clk_reg, host->regs + SD_EMMC_CLOCK);
+
+ /* get the mux parents */
+ for (i = 0; i < MUX_CLK_NUM_PARENTS; i++) {
+ struct clk *clk;
+ char name[16];
+
+ snprintf(name, sizeof(name), "clkin%d", i);
+ clk = devm_clk_get(host->dev, name);
+ if (IS_ERR(clk))
+ return dev_err_probe(host->dev, PTR_ERR(clk),
+ "Missing clock %s\n", name);
+
+ mux_parent_names[i] = __clk_get_name(clk);
+ }
+
+ /* create the mux */
+ mux = devm_kzalloc(host->dev, sizeof(*mux), GFP_KERNEL);
+ if (!mux)
+ return -ENOMEM;
+
+ snprintf(clk_name, sizeof(clk_name), "%s#mux", dev_name(host->dev));
+ init.name = clk_name;
+ init.ops = &clk_mux_ops;
+ init.flags = 0;
+ init.parent_names = mux_parent_names;
+ init.num_parents = MUX_CLK_NUM_PARENTS;
+
+ mux->reg = host->regs + SD_EMMC_CLOCK;
+ mux->shift = __ffs(CLK_SRC_MASK);
+ mux->mask = CLK_SRC_MASK >> mux->shift;
+ mux->hw.init = &init;
+
+ host->mux_clk = devm_clk_register(host->dev, &mux->hw);
+ if (WARN_ON(IS_ERR(host->mux_clk)))
+ return PTR_ERR(host->mux_clk);
+
+ /* create the divider */
+ div = devm_kzalloc(host->dev, sizeof(*div), GFP_KERNEL);
+ if (!div)
+ return -ENOMEM;
+
+ snprintf(clk_name, sizeof(clk_name), "%s#div", dev_name(host->dev));
+ init.name = clk_name;
+ init.ops = &clk_divider_ops;
+ init.flags = CLK_SET_RATE_PARENT;
+ clk_parent[0] = __clk_get_name(host->mux_clk);
+ init.parent_names = clk_parent;
+ init.num_parents = 1;
+
+ div->reg = host->regs + SD_EMMC_CLOCK;
+ div->shift = __ffs(CLK_DIV_MASK);
+ div->width = __builtin_popcountl(CLK_DIV_MASK);
+ div->hw.init = &init;
+ div->flags = CLK_DIVIDER_ONE_BASED;
+
+ host->mmc_clk = devm_clk_register(host->dev, &div->hw);
+ if (WARN_ON(IS_ERR(host->mmc_clk)))
+ return PTR_ERR(host->mmc_clk);
+
+ /* init SD_EMMC_CLOCK to sane defaults w/min clock rate */
+ host->mmc->f_min = clk_round_rate(host->mmc_clk, 400000);
+ ret = clk_set_rate(host->mmc_clk, host->mmc->f_min);
+ if (ret)
+ return ret;
+
+ return clk_prepare_enable(host->mmc_clk);
+}
+
+static void meson_mmc_disable_resampling(struct meson_host *host)
+{
+ unsigned int val = readl(host->regs + host->data->adjust);
+
+ val &= ~ADJUST_ADJ_EN;
+ writel(val, host->regs + host->data->adjust);
+}
+
+static void meson_mmc_reset_resampling(struct meson_host *host)
+{
+ unsigned int val;
+
+ meson_mmc_disable_resampling(host);
+
+ val = readl(host->regs + host->data->adjust);
+ val &= ~ADJUST_ADJ_DELAY_MASK;
+ writel(val, host->regs + host->data->adjust);
+}
+
+static int meson_mmc_resampling_tuning(struct mmc_host *mmc, u32 opcode)
+{
+ struct meson_host *host = mmc_priv(mmc);
+ unsigned int val, dly, max_dly, i;
+ int ret;
+
+ /* Resampling is done using the source clock */
+ max_dly = DIV_ROUND_UP(clk_get_rate(host->mux_clk),
+ clk_get_rate(host->mmc_clk));
+
+ val = readl(host->regs + host->data->adjust);
+ val |= ADJUST_ADJ_EN;
+ writel(val, host->regs + host->data->adjust);
+
+ if (mmc_doing_retune(mmc))
+ dly = FIELD_GET(ADJUST_ADJ_DELAY_MASK, val) + 1;
+ else
+ dly = 0;
+
+ for (i = 0; i < max_dly; i++) {
+ val &= ~ADJUST_ADJ_DELAY_MASK;
+ val |= FIELD_PREP(ADJUST_ADJ_DELAY_MASK, (dly + i) % max_dly);
+ writel(val, host->regs + host->data->adjust);
+
+ ret = mmc_send_tuning(mmc, opcode, NULL);
+ if (!ret) {
+ dev_dbg(mmc_dev(mmc), "resampling delay: %u\n",
+ (dly + i) % max_dly);
+ return 0;
+ }
+ }
+
+ meson_mmc_reset_resampling(host);
+ return -EIO;
+}
+
+static int meson_mmc_prepare_ios_clock(struct meson_host *host,
+ struct mmc_ios *ios)
+{
+ bool ddr;
+
+ switch (ios->timing) {
+ case MMC_TIMING_MMC_DDR52:
+ case MMC_TIMING_UHS_DDR50:
+ ddr = true;
+ break;
+
+ default:
+ ddr = false;
+ break;
+ }
+
+ return meson_mmc_clk_set(host, ios->clock, ddr);
+}
+
+static void meson_mmc_check_resampling(struct meson_host *host,
+ struct mmc_ios *ios)
+{
+ switch (ios->timing) {
+ case MMC_TIMING_LEGACY:
+ case MMC_TIMING_MMC_HS:
+ case MMC_TIMING_SD_HS:
+ case MMC_TIMING_MMC_DDR52:
+ meson_mmc_disable_resampling(host);
+ break;
+ }
+}
+
+static void meson_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
+{
+ struct meson_host *host = mmc_priv(mmc);
+ u32 bus_width, val;
+ int err;
+
+ /*
+ * GPIO regulator, only controls switching between 1v8 and
+ * 3v3, doesn't support MMC_POWER_OFF, MMC_POWER_ON.
+ */
+ switch (ios->power_mode) {
+ case MMC_POWER_OFF:
+ mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, 0);
+ mmc_regulator_disable_vqmmc(mmc);
+
+ break;
+
+ case MMC_POWER_UP:
+ mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, ios->vdd);
+
+ break;
+
+ case MMC_POWER_ON:
+ mmc_regulator_enable_vqmmc(mmc);
+
+ break;
+ }
+
+ /* Bus width */
+ switch (ios->bus_width) {
+ case MMC_BUS_WIDTH_1:
+ bus_width = CFG_BUS_WIDTH_1;
+ break;
+ case MMC_BUS_WIDTH_4:
+ bus_width = CFG_BUS_WIDTH_4;
+ break;
+ case MMC_BUS_WIDTH_8:
+ bus_width = CFG_BUS_WIDTH_8;
+ break;
+ default:
+ dev_err(host->dev, "Invalid ios->bus_width: %u. Setting to 4.\n",
+ ios->bus_width);
+ bus_width = CFG_BUS_WIDTH_4;
+ }
+
+ val = readl(host->regs + SD_EMMC_CFG);
+ val &= ~CFG_BUS_WIDTH_MASK;
+ val |= FIELD_PREP(CFG_BUS_WIDTH_MASK, bus_width);
+ writel(val, host->regs + SD_EMMC_CFG);
+
+ meson_mmc_check_resampling(host, ios);
+ err = meson_mmc_prepare_ios_clock(host, ios);
+ if (err)
+ dev_err(host->dev, "Failed to set clock: %d\n,", err);
+
+ dev_dbg(host->dev, "SD_EMMC_CFG: 0x%08x\n", val);
+}
+
+static void meson_mmc_request_done(struct mmc_host *mmc,
+ struct mmc_request *mrq)
+{
+ struct meson_host *host = mmc_priv(mmc);
+
+ host->cmd = NULL;
+ if (host->needs_pre_post_req)
+ meson_mmc_post_req(mmc, mrq, 0);
+ mmc_request_done(host->mmc, mrq);
+}
+
+static void meson_mmc_set_blksz(struct mmc_host *mmc, unsigned int blksz)
+{
+ struct meson_host *host = mmc_priv(mmc);
+ u32 cfg, blksz_old;
+
+ cfg = readl(host->regs + SD_EMMC_CFG);
+ blksz_old = FIELD_GET(CFG_BLK_LEN_MASK, cfg);
+
+ if (!is_power_of_2(blksz))
+ dev_err(host->dev, "blksz %u is not a power of 2\n", blksz);
+
+ blksz = ilog2(blksz);
+
+ /* check if block-size matches, if not update */
+ if (blksz == blksz_old)
+ return;
+
+ dev_dbg(host->dev, "%s: update blk_len %d -> %d\n", __func__,
+ blksz_old, blksz);
+
+ cfg &= ~CFG_BLK_LEN_MASK;
+ cfg |= FIELD_PREP(CFG_BLK_LEN_MASK, blksz);
+ writel(cfg, host->regs + SD_EMMC_CFG);
+}
+
+static void meson_mmc_set_response_bits(struct mmc_command *cmd, u32 *cmd_cfg)
+{
+ if (cmd->flags & MMC_RSP_PRESENT) {
+ if (cmd->flags & MMC_RSP_136)
+ *cmd_cfg |= CMD_CFG_RESP_128;
+ *cmd_cfg |= CMD_CFG_RESP_NUM;
+
+ if (!(cmd->flags & MMC_RSP_CRC))
+ *cmd_cfg |= CMD_CFG_RESP_NOCRC;
+
+ if (cmd->flags & MMC_RSP_BUSY)
+ *cmd_cfg |= CMD_CFG_R1B;
+ } else {
+ *cmd_cfg |= CMD_CFG_NO_RESP;
+ }
+}
+
+static void meson_mmc_desc_chain_transfer(struct mmc_host *mmc, u32 cmd_cfg)
+{
+ struct meson_host *host = mmc_priv(mmc);
+ struct sd_emmc_desc *desc = host->descs;
+ struct mmc_data *data = host->cmd->data;
+ struct scatterlist *sg;
+ u32 start;
+ int i;
+
+ if (data->flags & MMC_DATA_WRITE)
+ cmd_cfg |= CMD_CFG_DATA_WR;
+
+ if (data->blocks > 1) {
+ cmd_cfg |= CMD_CFG_BLOCK_MODE;
+ meson_mmc_set_blksz(mmc, data->blksz);
+ }
+
+ for_each_sg(data->sg, sg, data->sg_count, i) {
+ unsigned int len = sg_dma_len(sg);
+
+ if (data->blocks > 1)
+ len /= data->blksz;
+
+ desc[i].cmd_cfg = cmd_cfg;
+ desc[i].cmd_cfg |= FIELD_PREP(CMD_CFG_LENGTH_MASK, len);
+ if (i > 0)
+ desc[i].cmd_cfg |= CMD_CFG_NO_CMD;
+ desc[i].cmd_arg = host->cmd->arg;
+ desc[i].cmd_resp = 0;
+ desc[i].cmd_data = sg_dma_address(sg);
+ }
+ desc[data->sg_count - 1].cmd_cfg |= CMD_CFG_END_OF_CHAIN;
+
+ dma_wmb(); /* ensure descriptor is written before kicked */
+ start = host->descs_dma_addr | START_DESC_BUSY;
+ writel(start, host->regs + SD_EMMC_START);
+}
+
+/* local sg copy for dram_access_quirk */
+static void meson_mmc_copy_buffer(struct meson_host *host, struct mmc_data *data,
+ size_t buflen, bool to_buffer)
+{
+ unsigned int sg_flags = SG_MITER_ATOMIC;
+ struct scatterlist *sgl = data->sg;
+ unsigned int nents = data->sg_len;
+ struct sg_mapping_iter miter;
+ unsigned int offset = 0;
+
+ if (to_buffer)
+ sg_flags |= SG_MITER_FROM_SG;
+ else
+ sg_flags |= SG_MITER_TO_SG;
+
+ sg_miter_start(&miter, sgl, nents, sg_flags);
+
+ while ((offset < buflen) && sg_miter_next(&miter)) {
+ unsigned int buf_offset = 0;
+ unsigned int len, left;
+ u32 *buf = miter.addr;
+
+ len = min(miter.length, buflen - offset);
+ left = len;
+
+ if (to_buffer) {
+ do {
+ writel(*buf++, host->bounce_iomem_buf + offset + buf_offset);
+
+ buf_offset += 4;
+ left -= 4;
+ } while (left);
+ } else {
+ do {
+ *buf++ = readl(host->bounce_iomem_buf + offset + buf_offset);
+
+ buf_offset += 4;
+ left -= 4;
+ } while (left);
+ }
+
+ offset += len;
+ }
+
+ sg_miter_stop(&miter);
+}
+
+static void meson_mmc_start_cmd(struct mmc_host *mmc, struct mmc_command *cmd)
+{
+ struct meson_host *host = mmc_priv(mmc);
+ struct mmc_data *data = cmd->data;
+ u32 cmd_cfg = 0, cmd_data = 0;
+ unsigned int xfer_bytes = 0;
+
+ /* Setup descriptors */
+ dma_rmb();
+
+ host->cmd = cmd;
+
+ cmd_cfg |= FIELD_PREP(CMD_CFG_CMD_INDEX_MASK, cmd->opcode);
+ cmd_cfg |= CMD_CFG_OWNER; /* owned by CPU */
+
+ meson_mmc_set_response_bits(cmd, &cmd_cfg);
+
+ /* data? */
+ if (data) {
+ data->bytes_xfered = 0;
+ cmd_cfg |= CMD_CFG_DATA_IO;
+ cmd_cfg |= FIELD_PREP(CMD_CFG_TIMEOUT_MASK,
+ ilog2(meson_mmc_get_timeout_msecs(data)));
+
+ if (meson_mmc_desc_chain_mode(data)) {
+ meson_mmc_desc_chain_transfer(mmc, cmd_cfg);
+ return;
+ }
+
+ if (data->blocks > 1) {
+ cmd_cfg |= CMD_CFG_BLOCK_MODE;
+ cmd_cfg |= FIELD_PREP(CMD_CFG_LENGTH_MASK,
+ data->blocks);
+ meson_mmc_set_blksz(mmc, data->blksz);
+ } else {
+ cmd_cfg |= FIELD_PREP(CMD_CFG_LENGTH_MASK, data->blksz);
+ }
+
+ xfer_bytes = data->blksz * data->blocks;
+ if (data->flags & MMC_DATA_WRITE) {
+ cmd_cfg |= CMD_CFG_DATA_WR;
+ WARN_ON(xfer_bytes > host->bounce_buf_size);
+ if (host->dram_access_quirk)
+ meson_mmc_copy_buffer(host, data, xfer_bytes, true);
+ else
+ sg_copy_to_buffer(data->sg, data->sg_len,
+ host->bounce_buf, xfer_bytes);
+ dma_wmb();
+ }
+
+ cmd_data = host->bounce_dma_addr & CMD_DATA_MASK;
+ } else {
+ cmd_cfg |= FIELD_PREP(CMD_CFG_TIMEOUT_MASK,
+ ilog2(SD_EMMC_CMD_TIMEOUT));
+ }
+
+ /* Last descriptor */
+ cmd_cfg |= CMD_CFG_END_OF_CHAIN;
+ writel(cmd_cfg, host->regs + SD_EMMC_CMD_CFG);
+ writel(cmd_data, host->regs + SD_EMMC_CMD_DAT);
+ writel(0, host->regs + SD_EMMC_CMD_RSP);
+ wmb(); /* ensure descriptor is written before kicked */
+ writel(cmd->arg, host->regs + SD_EMMC_CMD_ARG);
+}
+
+static int meson_mmc_validate_dram_access(struct mmc_host *mmc, struct mmc_data *data)
+{
+ struct scatterlist *sg;
+ int i;
+
+ /* Reject request if any element offset or size is not 32bit aligned */
+ for_each_sg(data->sg, sg, data->sg_len, i) {
+ if (!IS_ALIGNED(sg->offset, sizeof(u32)) ||
+ !IS_ALIGNED(sg->length, sizeof(u32))) {
+ dev_err(mmc_dev(mmc), "unaligned sg offset %u len %u\n",
+ data->sg->offset, data->sg->length);
+ return -EINVAL;
+ }
+ }
+
+ return 0;
+}
+
+static void meson_mmc_request(struct mmc_host *mmc, struct mmc_request *mrq)
+{
+ struct meson_host *host = mmc_priv(mmc);
+ host->needs_pre_post_req = mrq->data &&
+ !(mrq->data->host_cookie & SD_EMMC_PRE_REQ_DONE);
+
+ /*
+ * The memory at the end of the controller used as bounce buffer for
+ * the dram_access_quirk only accepts 32bit read/write access,
+ * check the aligment and length of the data before starting the request.
+ */
+ if (host->dram_access_quirk && mrq->data) {
+ mrq->cmd->error = meson_mmc_validate_dram_access(mmc, mrq->data);
+ if (mrq->cmd->error) {
+ mmc_request_done(mmc, mrq);
+ return;
+ }
+ }
+
+ if (host->needs_pre_post_req) {
+ meson_mmc_get_transfer_mode(mmc, mrq);
+ if (!meson_mmc_desc_chain_mode(mrq->data))
+ host->needs_pre_post_req = false;
+ }
+
+ if (host->needs_pre_post_req)
+ meson_mmc_pre_req(mmc, mrq);
+
+ /* Stop execution */
+ writel(0, host->regs + SD_EMMC_START);
+
+ meson_mmc_start_cmd(mmc, mrq->sbc ?: mrq->cmd);
+}
+
+static void meson_mmc_read_resp(struct mmc_host *mmc, struct mmc_command *cmd)
+{
+ struct meson_host *host = mmc_priv(mmc);
+
+ if (cmd->flags & MMC_RSP_136) {
+ cmd->resp[0] = readl(host->regs + SD_EMMC_CMD_RSP3);
+ cmd->resp[1] = readl(host->regs + SD_EMMC_CMD_RSP2);
+ cmd->resp[2] = readl(host->regs + SD_EMMC_CMD_RSP1);
+ cmd->resp[3] = readl(host->regs + SD_EMMC_CMD_RSP);
+ } else if (cmd->flags & MMC_RSP_PRESENT) {
+ cmd->resp[0] = readl(host->regs + SD_EMMC_CMD_RSP);
+ }
+}
+
+static void __meson_mmc_enable_sdio_irq(struct mmc_host *mmc, int enable)
+{
+ struct meson_host *host = mmc_priv(mmc);
+ u32 reg_irqen = IRQ_EN_MASK;
+
+ if (enable)
+ reg_irqen |= IRQ_SDIO;
+ writel(reg_irqen, host->regs + SD_EMMC_IRQ_EN);
+}
+
+static irqreturn_t meson_mmc_irq(int irq, void *dev_id)
+{
+ struct meson_host *host = dev_id;
+ struct mmc_command *cmd;
+ u32 status, raw_status, irq_mask = IRQ_EN_MASK;
+ irqreturn_t ret = IRQ_NONE;
+
+ if (host->mmc->caps & MMC_CAP_SDIO_IRQ)
+ irq_mask |= IRQ_SDIO;
+ raw_status = readl(host->regs + SD_EMMC_STATUS);
+ status = raw_status & irq_mask;
+
+ if (!status) {
+ dev_dbg(host->dev,
+ "Unexpected IRQ! irq_en 0x%08x - status 0x%08x\n",
+ irq_mask, raw_status);
+ return IRQ_NONE;
+ }
+
+ /* ack all raised interrupts */
+ writel(status, host->regs + SD_EMMC_STATUS);
+
+ cmd = host->cmd;
+
+ if (status & IRQ_SDIO) {
+ spin_lock(&host->lock);
+ __meson_mmc_enable_sdio_irq(host->mmc, 0);
+ sdio_signal_irq(host->mmc);
+ spin_unlock(&host->lock);
+ status &= ~IRQ_SDIO;
+ if (!status)
+ return IRQ_HANDLED;
+ }
+
+ if (WARN_ON(!cmd))
+ return IRQ_NONE;
+
+ cmd->error = 0;
+ if (status & IRQ_CRC_ERR) {
+ dev_dbg(host->dev, "CRC Error - status 0x%08x\n", status);
+ cmd->error = -EILSEQ;
+ ret = IRQ_WAKE_THREAD;
+ goto out;
+ }
+
+ if (status & IRQ_TIMEOUTS) {
+ dev_dbg(host->dev, "Timeout - status 0x%08x\n", status);
+ cmd->error = -ETIMEDOUT;
+ ret = IRQ_WAKE_THREAD;
+ goto out;
+ }
+
+ meson_mmc_read_resp(host->mmc, cmd);
+
+ if (status & (IRQ_END_OF_CHAIN | IRQ_RESP_STATUS)) {
+ struct mmc_data *data = cmd->data;
+
+ if (data && !cmd->error)
+ data->bytes_xfered = data->blksz * data->blocks;
+
+ return IRQ_WAKE_THREAD;
+ }
+
+out:
+ if (cmd->error) {
+ /* Stop desc in case of errors */
+ u32 start = readl(host->regs + SD_EMMC_START);
+
+ start &= ~START_DESC_BUSY;
+ writel(start, host->regs + SD_EMMC_START);
+ }
+
+ return ret;
+}
+
+static int meson_mmc_wait_desc_stop(struct meson_host *host)
+{
+ u32 status;
+
+ /*
+ * It may sometimes take a while for it to actually halt. Here, we
+ * are giving it 5ms to comply
+ *
+ * If we don't confirm the descriptor is stopped, it might raise new
+ * IRQs after we have called mmc_request_done() which is bad.
+ */
+
+ return readl_poll_timeout(host->regs + SD_EMMC_STATUS, status,
+ !(status & (STATUS_BUSY | STATUS_DESC_BUSY)),
+ 100, 5000);
+}
+
+static irqreturn_t meson_mmc_irq_thread(int irq, void *dev_id)
+{
+ struct meson_host *host = dev_id;
+ struct mmc_command *next_cmd, *cmd = host->cmd;
+ struct mmc_data *data;
+ unsigned int xfer_bytes;
+
+ if (WARN_ON(!cmd))
+ return IRQ_NONE;
+
+ if (cmd->error) {
+ meson_mmc_wait_desc_stop(host);
+ meson_mmc_request_done(host->mmc, cmd->mrq);
+
+ return IRQ_HANDLED;
+ }
+
+ data = cmd->data;
+ if (meson_mmc_bounce_buf_read(data)) {
+ xfer_bytes = data->blksz * data->blocks;
+ WARN_ON(xfer_bytes > host->bounce_buf_size);
+ if (host->dram_access_quirk)
+ meson_mmc_copy_buffer(host, data, xfer_bytes, false);
+ else
+ sg_copy_from_buffer(data->sg, data->sg_len,
+ host->bounce_buf, xfer_bytes);
+ }
+
+ next_cmd = meson_mmc_get_next_command(cmd);
+ if (next_cmd)
+ meson_mmc_start_cmd(host->mmc, next_cmd);
+ else
+ meson_mmc_request_done(host->mmc, cmd->mrq);
+
+ return IRQ_HANDLED;
+}
+
+static void meson_mmc_cfg_init(struct meson_host *host)
+{
+ u32 cfg = 0;
+
+ cfg |= FIELD_PREP(CFG_RESP_TIMEOUT_MASK,
+ ilog2(SD_EMMC_CFG_RESP_TIMEOUT));
+ cfg |= FIELD_PREP(CFG_RC_CC_MASK, ilog2(SD_EMMC_CFG_CMD_GAP));
+ cfg |= FIELD_PREP(CFG_BLK_LEN_MASK, ilog2(SD_EMMC_CFG_BLK_SIZE));
+
+ /* abort chain on R/W errors */
+ cfg |= CFG_ERR_ABORT;
+
+ writel(cfg, host->regs + SD_EMMC_CFG);
+}
+
+static int meson_mmc_card_busy(struct mmc_host *mmc)
+{
+ struct meson_host *host = mmc_priv(mmc);
+ u32 regval;
+
+ regval = readl(host->regs + SD_EMMC_STATUS);
+
+ /* We are only interrested in lines 0 to 3, so mask the other ones */
+ return !(FIELD_GET(STATUS_DATI, regval) & 0xf);
+}
+
+static int meson_mmc_voltage_switch(struct mmc_host *mmc, struct mmc_ios *ios)
+{
+ int ret;
+
+ /* vqmmc regulator is available */
+ if (!IS_ERR(mmc->supply.vqmmc)) {
+ /*
+ * The usual amlogic setup uses a GPIO to switch from one
+ * regulator to the other. While the voltage ramp up is
+ * pretty fast, care must be taken when switching from 3.3v
+ * to 1.8v. Please make sure the regulator framework is aware
+ * of your own regulator constraints
+ */
+ ret = mmc_regulator_set_vqmmc(mmc, ios);
+ return ret < 0 ? ret : 0;
+ }
+
+ /* no vqmmc regulator, assume fixed regulator at 3/3.3V */
+ if (ios->signal_voltage == MMC_SIGNAL_VOLTAGE_330)
+ return 0;
+
+ return -EINVAL;
+}
+
+static void meson_mmc_enable_sdio_irq(struct mmc_host *mmc, int enable)
+{
+ struct meson_host *host = mmc_priv(mmc);
+ unsigned long flags;
+
+ spin_lock_irqsave(&host->lock, flags);
+ __meson_mmc_enable_sdio_irq(mmc, enable);
+ spin_unlock_irqrestore(&host->lock, flags);
+}
+
+static void meson_mmc_ack_sdio_irq(struct mmc_host *mmc)
+{
+ meson_mmc_enable_sdio_irq(mmc, 1);
+}
+
+static const struct mmc_host_ops meson_mmc_ops = {
+ .request = meson_mmc_request,
+ .set_ios = meson_mmc_set_ios,
+ .get_cd = mmc_gpio_get_cd,
+ .pre_req = meson_mmc_pre_req,
+ .post_req = meson_mmc_post_req,
+ .execute_tuning = meson_mmc_resampling_tuning,
+ .card_busy = meson_mmc_card_busy,
+ .start_signal_voltage_switch = meson_mmc_voltage_switch,
+ .enable_sdio_irq = meson_mmc_enable_sdio_irq,
+ .ack_sdio_irq = meson_mmc_ack_sdio_irq,
+};
+
+static int meson_mmc_probe(struct platform_device *pdev)
+{
+ struct resource *res;
+ struct meson_host *host;
+ struct mmc_host *mmc;
+ struct clk *core_clk;
+ int cd_irq, ret;
+
+ mmc = devm_mmc_alloc_host(&pdev->dev, sizeof(struct meson_host));
+ if (!mmc)
+ return -ENOMEM;
+ host = mmc_priv(mmc);
+ host->mmc = mmc;
+ host->dev = &pdev->dev;
+ dev_set_drvdata(&pdev->dev, host);
+
+ /* The G12A SDIO Controller needs an SRAM bounce buffer */
+ host->dram_access_quirk = device_property_read_bool(&pdev->dev,
+ "amlogic,dram-access-quirk");
+
+ /* Get regulators and the supported OCR mask */
+ ret = mmc_regulator_get_supply(mmc);
+ if (ret)
+ return ret;
+
+ ret = mmc_of_parse(mmc);
+ if (ret)
+ return dev_err_probe(&pdev->dev, ret, "error parsing DT\n");
+
+ mmc->caps |= MMC_CAP_CMD23;
+
+ if (mmc->caps & MMC_CAP_SDIO_IRQ)
+ mmc->caps2 |= MMC_CAP2_SDIO_IRQ_NOTHREAD;
+
+ host->data = of_device_get_match_data(&pdev->dev);
+ if (!host->data)
+ return -EINVAL;
+
+ ret = device_reset_optional(&pdev->dev);
+ if (ret)
+ return dev_err_probe(&pdev->dev, ret, "device reset failed\n");
+
+ host->regs = devm_platform_get_and_ioremap_resource(pdev, 0, &res);
+ if (IS_ERR(host->regs))
+ return PTR_ERR(host->regs);
+
+ host->irq = platform_get_irq(pdev, 0);
+ if (host->irq < 0)
+ return host->irq;
+
+ cd_irq = platform_get_irq_optional(pdev, 1);
+ mmc_gpio_set_cd_irq(mmc, cd_irq);
+
+ host->pinctrl = devm_pinctrl_get(&pdev->dev);
+ if (IS_ERR(host->pinctrl))
+ return PTR_ERR(host->pinctrl);
+
+ host->pins_clk_gate = pinctrl_lookup_state(host->pinctrl,
+ "clk-gate");
+ if (IS_ERR(host->pins_clk_gate)) {
+ dev_warn(&pdev->dev,
+ "can't get clk-gate pinctrl, using clk_stop bit\n");
+ host->pins_clk_gate = NULL;
+ }
+
+ core_clk = devm_clk_get_enabled(&pdev->dev, "core");
+ if (IS_ERR(core_clk))
+ return PTR_ERR(core_clk);
+
+ ret = meson_mmc_clk_init(host);
+ if (ret)
+ return ret;
+
+ /* set config to sane default */
+ meson_mmc_cfg_init(host);
+
+ /* Stop execution */
+ writel(0, host->regs + SD_EMMC_START);
+
+ /* clear, ack and enable interrupts */
+ writel(0, host->regs + SD_EMMC_IRQ_EN);
+ writel(IRQ_EN_MASK, host->regs + SD_EMMC_STATUS);
+ writel(IRQ_EN_MASK, host->regs + SD_EMMC_IRQ_EN);
+
+ ret = request_threaded_irq(host->irq, meson_mmc_irq,
+ meson_mmc_irq_thread, IRQF_ONESHOT,
+ dev_name(&pdev->dev), host);
+ if (ret)
+ goto err_init_clk;
+
+ spin_lock_init(&host->lock);
+
+ if (host->dram_access_quirk) {
+ /* Limit segments to 1 due to low available sram memory */
+ mmc->max_segs = 1;
+ /* Limit to the available sram memory */
+ mmc->max_blk_count = SD_EMMC_SRAM_DATA_BUF_LEN /
+ mmc->max_blk_size;
+ } else {
+ mmc->max_blk_count = CMD_CFG_LENGTH_MASK;
+ mmc->max_segs = SD_EMMC_DESC_BUF_LEN /
+ sizeof(struct sd_emmc_desc);
+ }
+ mmc->max_req_size = mmc->max_blk_count * mmc->max_blk_size;
+ mmc->max_seg_size = mmc->max_req_size;
+
+ /*
+ * At the moment, we don't know how to reliably enable HS400.
+ * From the different datasheets, it is not even clear if this mode
+ * is officially supported by any of the SoCs
+ */
+ mmc->caps2 &= ~MMC_CAP2_HS400;
+
+ if (host->dram_access_quirk) {
+ /*
+ * The MMC Controller embeds 1,5KiB of internal SRAM
+ * that can be used to be used as bounce buffer.
+ * In the case of the G12A SDIO controller, use these
+ * instead of the DDR memory
+ */
+ host->bounce_buf_size = SD_EMMC_SRAM_DATA_BUF_LEN;
+ host->bounce_iomem_buf = host->regs + SD_EMMC_SRAM_DATA_BUF_OFF;
+ host->bounce_dma_addr = res->start + SD_EMMC_SRAM_DATA_BUF_OFF;
+ } else {
+ /* data bounce buffer */
+ host->bounce_buf_size = mmc->max_req_size;
+ host->bounce_buf =
+ dmam_alloc_coherent(host->dev, host->bounce_buf_size,
+ &host->bounce_dma_addr, GFP_KERNEL);
+ if (host->bounce_buf == NULL) {
+ dev_err(host->dev, "Unable to map allocate DMA bounce buffer.\n");
+ ret = -ENOMEM;
+ goto err_free_irq;
+ }
+ }
+
+ host->descs = dmam_alloc_coherent(host->dev, SD_EMMC_DESC_BUF_LEN,
+ &host->descs_dma_addr, GFP_KERNEL);
+ if (!host->descs) {
+ dev_err(host->dev, "Allocating descriptor DMA buffer failed\n");
+ ret = -ENOMEM;
+ goto err_free_irq;
+ }
+
+ mmc->ops = &meson_mmc_ops;
+ ret = mmc_add_host(mmc);
+ if (ret)
+ goto err_free_irq;
+
+ return 0;
+
+err_free_irq:
+ free_irq(host->irq, host);
+err_init_clk:
+ clk_disable_unprepare(host->mmc_clk);
+ return ret;
+}
+
+static void meson_mmc_remove(struct platform_device *pdev)
+{
+ struct meson_host *host = dev_get_drvdata(&pdev->dev);
+
+ mmc_remove_host(host->mmc);
+
+ /* disable interrupts */
+ writel(0, host->regs + SD_EMMC_IRQ_EN);
+ free_irq(host->irq, host);
+
+ clk_disable_unprepare(host->mmc_clk);
+}
+
+static const struct meson_mmc_data meson_gx_data = {
+ .tx_delay_mask = CLK_V2_TX_DELAY_MASK,
+ .rx_delay_mask = CLK_V2_RX_DELAY_MASK,
+ .always_on = CLK_V2_ALWAYS_ON,
+ .adjust = SD_EMMC_ADJUST,
+ .irq_sdio_sleep = CLK_V2_IRQ_SDIO_SLEEP,
+};
+
+static const struct meson_mmc_data meson_axg_data = {
+ .tx_delay_mask = CLK_V3_TX_DELAY_MASK,
+ .rx_delay_mask = CLK_V3_RX_DELAY_MASK,
+ .always_on = CLK_V3_ALWAYS_ON,
+ .adjust = SD_EMMC_V3_ADJUST,
+ .irq_sdio_sleep = CLK_V3_IRQ_SDIO_SLEEP,
+};
+
+static const struct of_device_id meson_mmc_of_match[] = {
+ { .compatible = "amlogic,meson-gx-mmc", .data = &meson_gx_data },
+ { .compatible = "amlogic,meson-gxbb-mmc", .data = &meson_gx_data },
+ { .compatible = "amlogic,meson-gxl-mmc", .data = &meson_gx_data },
+ { .compatible = "amlogic,meson-gxm-mmc", .data = &meson_gx_data },
+ { .compatible = "amlogic,meson-axg-mmc", .data = &meson_axg_data },
+ {}
+};
+MODULE_DEVICE_TABLE(of, meson_mmc_of_match);
+
+static struct platform_driver meson_mmc_driver = {
+ .probe = meson_mmc_probe,
+ .remove_new = meson_mmc_remove,
+ .driver = {
+ .name = DRIVER_NAME,
+ .probe_type = PROBE_PREFER_ASYNCHRONOUS,
+ .of_match_table = meson_mmc_of_match,
+ },
+};
+
+module_platform_driver(meson_mmc_driver);
+
+MODULE_DESCRIPTION("Amlogic S905*/GX*/AXG SD/eMMC driver");
+MODULE_AUTHOR("Kevin Hilman <khilman@baylibre.com>");
+MODULE_LICENSE("GPL v2");