summaryrefslogtreecommitdiffstats
path: root/drivers/mmc/host/mmci.h
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/mmc/host/mmci.h')
-rw-r--r--drivers/mmc/host/mmci.h494
1 files changed, 494 insertions, 0 deletions
diff --git a/drivers/mmc/host/mmci.h b/drivers/mmc/host/mmci.h
new file mode 100644
index 0000000000..253197f132
--- /dev/null
+++ b/drivers/mmc/host/mmci.h
@@ -0,0 +1,494 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * linux/drivers/mmc/host/mmci.h - ARM PrimeCell MMCI PL180/1 driver
+ *
+ * Copyright (C) 2003 Deep Blue Solutions, Ltd, All Rights Reserved.
+ */
+#define MMCIPOWER 0x000
+#define MCI_PWR_OFF 0x00
+#define MCI_PWR_UP 0x02
+#define MCI_PWR_ON 0x03
+#define MCI_OD (1 << 6)
+#define MCI_ROD (1 << 7)
+/*
+ * The ST Micro version does not have ROD and reuse the voltage registers for
+ * direction settings.
+ */
+#define MCI_ST_DATA2DIREN (1 << 2)
+#define MCI_ST_CMDDIREN (1 << 3)
+#define MCI_ST_DATA0DIREN (1 << 4)
+#define MCI_ST_DATA31DIREN (1 << 5)
+#define MCI_ST_FBCLKEN (1 << 7)
+#define MCI_ST_DATA74DIREN (1 << 8)
+/*
+ * The STM32 sdmmc does not have PWR_UP/OD/ROD
+ * and uses the power register for
+ */
+#define MCI_STM32_PWR_CYC 0x02
+#define MCI_STM32_VSWITCH BIT(2)
+#define MCI_STM32_VSWITCHEN BIT(3)
+#define MCI_STM32_DIRPOL BIT(4)
+
+#define MMCICLOCK 0x004
+#define MCI_CLK_ENABLE (1 << 8)
+#define MCI_CLK_PWRSAVE (1 << 9)
+#define MCI_CLK_BYPASS (1 << 10)
+#define MCI_4BIT_BUS (1 << 11)
+/*
+ * 8bit wide buses, hardware flow contronl, negative edges and clock inversion
+ * supported in ST Micro U300 and Ux500 versions
+ */
+#define MCI_ST_8BIT_BUS (1 << 12)
+#define MCI_ST_U300_HWFCEN (1 << 13)
+#define MCI_ST_UX500_NEG_EDGE (1 << 13)
+#define MCI_ST_UX500_HWFCEN (1 << 14)
+#define MCI_ST_UX500_CLK_INV (1 << 15)
+/* Modified PL180 on Versatile Express platform */
+#define MCI_ARM_HWFCEN (1 << 12)
+
+/* Modified on Qualcomm Integrations */
+#define MCI_QCOM_CLK_WIDEBUS_8 (BIT(10) | BIT(11))
+#define MCI_QCOM_CLK_FLOWENA BIT(12)
+#define MCI_QCOM_CLK_INVERTOUT BIT(13)
+
+/* select in latch data and command in */
+#define MCI_QCOM_CLK_SELECT_IN_FBCLK BIT(15)
+#define MCI_QCOM_CLK_SELECT_IN_DDR_MODE (BIT(14) | BIT(15))
+
+/* Modified on STM32 sdmmc */
+#define MCI_STM32_CLK_CLKDIV_MSK GENMASK(9, 0)
+#define MCI_STM32_CLK_WIDEBUS_4 BIT(14)
+#define MCI_STM32_CLK_WIDEBUS_8 BIT(15)
+#define MCI_STM32_CLK_NEGEDGE BIT(16)
+#define MCI_STM32_CLK_HWFCEN BIT(17)
+#define MCI_STM32_CLK_DDR BIT(18)
+#define MCI_STM32_CLK_BUSSPEED BIT(19)
+#define MCI_STM32_CLK_SEL_MSK GENMASK(21, 20)
+#define MCI_STM32_CLK_SELCK (0 << 20)
+#define MCI_STM32_CLK_SELCKIN (1 << 20)
+#define MCI_STM32_CLK_SELFBCK (2 << 20)
+
+#define MMCIARGUMENT 0x008
+
+/* The command register controls the Command Path State Machine (CPSM) */
+#define MMCICOMMAND 0x00c
+#define MCI_CPSM_RESPONSE BIT(6)
+#define MCI_CPSM_LONGRSP BIT(7)
+#define MCI_CPSM_INTERRUPT BIT(8)
+#define MCI_CPSM_PENDING BIT(9)
+#define MCI_CPSM_ENABLE BIT(10)
+/* Command register flag extenstions in the ST Micro versions */
+#define MCI_CPSM_ST_SDIO_SUSP BIT(11)
+#define MCI_CPSM_ST_ENCMD_COMPL BIT(12)
+#define MCI_CPSM_ST_NIEN BIT(13)
+#define MCI_CPSM_ST_CE_ATACMD BIT(14)
+/* Command register flag extensions in the Qualcomm versions */
+#define MCI_CPSM_QCOM_PROGENA BIT(11)
+#define MCI_CPSM_QCOM_DATCMD BIT(12)
+#define MCI_CPSM_QCOM_MCIABORT BIT(13)
+#define MCI_CPSM_QCOM_CCSENABLE BIT(14)
+#define MCI_CPSM_QCOM_CCSDISABLE BIT(15)
+#define MCI_CPSM_QCOM_AUTO_CMD19 BIT(16)
+#define MCI_CPSM_QCOM_AUTO_CMD21 BIT(21)
+/* Command register in STM32 sdmmc versions */
+#define MCI_CPSM_STM32_CMDTRANS BIT(6)
+#define MCI_CPSM_STM32_CMDSTOP BIT(7)
+#define MCI_CPSM_STM32_WAITRESP_MASK GENMASK(9, 8)
+#define MCI_CPSM_STM32_NORSP (0 << 8)
+#define MCI_CPSM_STM32_SRSP_CRC (1 << 8)
+#define MCI_CPSM_STM32_SRSP (2 << 8)
+#define MCI_CPSM_STM32_LRSP_CRC (3 << 8)
+#define MCI_CPSM_STM32_ENABLE BIT(12)
+
+#define MMCIRESPCMD 0x010
+#define MMCIRESPONSE0 0x014
+#define MMCIRESPONSE1 0x018
+#define MMCIRESPONSE2 0x01c
+#define MMCIRESPONSE3 0x020
+#define MMCIDATATIMER 0x024
+#define MMCIDATALENGTH 0x028
+
+/* The data control register controls the Data Path State Machine (DPSM) */
+#define MMCIDATACTRL 0x02c
+#define MCI_DPSM_ENABLE BIT(0)
+#define MCI_DPSM_DIRECTION BIT(1)
+#define MCI_DPSM_MODE BIT(2)
+#define MCI_DPSM_DMAENABLE BIT(3)
+#define MCI_DPSM_BLOCKSIZE BIT(4)
+/* Control register extensions in the ST Micro U300 and Ux500 versions */
+#define MCI_DPSM_ST_RWSTART BIT(8)
+#define MCI_DPSM_ST_RWSTOP BIT(9)
+#define MCI_DPSM_ST_RWMOD BIT(10)
+#define MCI_DPSM_ST_SDIOEN BIT(11)
+/* Control register extensions in the ST Micro Ux500 versions */
+#define MCI_DPSM_ST_DMAREQCTL BIT(12)
+#define MCI_DPSM_ST_DBOOTMODEEN BIT(13)
+#define MCI_DPSM_ST_BUSYMODE BIT(14)
+#define MCI_DPSM_ST_DDRMODE BIT(15)
+/* Control register extensions in the Qualcomm versions */
+#define MCI_DPSM_QCOM_DATA_PEND BIT(17)
+#define MCI_DPSM_QCOM_RX_DATA_PEND BIT(20)
+/* Control register extensions in STM32 versions */
+#define MCI_DPSM_STM32_MODE_BLOCK (0 << 2)
+#define MCI_DPSM_STM32_MODE_SDIO (1 << 2)
+#define MCI_DPSM_STM32_MODE_STREAM (2 << 2)
+#define MCI_DPSM_STM32_MODE_BLOCK_STOP (3 << 2)
+
+#define MMCIDATACNT 0x030
+#define MMCISTATUS 0x034
+#define MCI_CMDCRCFAIL (1 << 0)
+#define MCI_DATACRCFAIL (1 << 1)
+#define MCI_CMDTIMEOUT (1 << 2)
+#define MCI_DATATIMEOUT (1 << 3)
+#define MCI_TXUNDERRUN (1 << 4)
+#define MCI_RXOVERRUN (1 << 5)
+#define MCI_CMDRESPEND (1 << 6)
+#define MCI_CMDSENT (1 << 7)
+#define MCI_DATAEND (1 << 8)
+#define MCI_STARTBITERR (1 << 9)
+#define MCI_DATABLOCKEND (1 << 10)
+#define MCI_CMDACTIVE (1 << 11)
+#define MCI_TXACTIVE (1 << 12)
+#define MCI_RXACTIVE (1 << 13)
+#define MCI_TXFIFOHALFEMPTY (1 << 14)
+#define MCI_RXFIFOHALFFULL (1 << 15)
+#define MCI_TXFIFOFULL (1 << 16)
+#define MCI_RXFIFOFULL (1 << 17)
+#define MCI_TXFIFOEMPTY (1 << 18)
+#define MCI_RXFIFOEMPTY (1 << 19)
+#define MCI_TXDATAAVLBL (1 << 20)
+#define MCI_RXDATAAVLBL (1 << 21)
+/* Extended status bits for the ST Micro variants */
+#define MCI_ST_SDIOIT (1 << 22)
+#define MCI_ST_CEATAEND (1 << 23)
+#define MCI_ST_CARDBUSY (1 << 24)
+/* Extended status bits for the STM32 variants */
+#define MCI_STM32_BUSYD0 BIT(20)
+#define MCI_STM32_BUSYD0END BIT(21)
+#define MCI_STM32_VSWEND BIT(25)
+
+#define MMCICLEAR 0x038
+#define MCI_CMDCRCFAILCLR (1 << 0)
+#define MCI_DATACRCFAILCLR (1 << 1)
+#define MCI_CMDTIMEOUTCLR (1 << 2)
+#define MCI_DATATIMEOUTCLR (1 << 3)
+#define MCI_TXUNDERRUNCLR (1 << 4)
+#define MCI_RXOVERRUNCLR (1 << 5)
+#define MCI_CMDRESPENDCLR (1 << 6)
+#define MCI_CMDSENTCLR (1 << 7)
+#define MCI_DATAENDCLR (1 << 8)
+#define MCI_STARTBITERRCLR (1 << 9)
+#define MCI_DATABLOCKENDCLR (1 << 10)
+/* Extended status bits for the ST Micro variants */
+#define MCI_ST_SDIOITC (1 << 22)
+#define MCI_ST_CEATAENDC (1 << 23)
+#define MCI_ST_BUSYENDC (1 << 24)
+/* Extended clear bits for the STM32 variants */
+#define MCI_STM32_VSWENDC BIT(25)
+#define MCI_STM32_CKSTOPC BIT(26)
+
+#define MMCIMASK0 0x03c
+#define MCI_CMDCRCFAILMASK (1 << 0)
+#define MCI_DATACRCFAILMASK (1 << 1)
+#define MCI_CMDTIMEOUTMASK (1 << 2)
+#define MCI_DATATIMEOUTMASK (1 << 3)
+#define MCI_TXUNDERRUNMASK (1 << 4)
+#define MCI_RXOVERRUNMASK (1 << 5)
+#define MCI_CMDRESPENDMASK (1 << 6)
+#define MCI_CMDSENTMASK (1 << 7)
+#define MCI_DATAENDMASK (1 << 8)
+#define MCI_STARTBITERRMASK (1 << 9)
+#define MCI_DATABLOCKENDMASK (1 << 10)
+#define MCI_CMDACTIVEMASK (1 << 11)
+#define MCI_TXACTIVEMASK (1 << 12)
+#define MCI_RXACTIVEMASK (1 << 13)
+#define MCI_TXFIFOHALFEMPTYMASK (1 << 14)
+#define MCI_RXFIFOHALFFULLMASK (1 << 15)
+#define MCI_TXFIFOFULLMASK (1 << 16)
+#define MCI_RXFIFOFULLMASK (1 << 17)
+#define MCI_TXFIFOEMPTYMASK (1 << 18)
+#define MCI_RXFIFOEMPTYMASK (1 << 19)
+#define MCI_TXDATAAVLBLMASK (1 << 20)
+#define MCI_RXDATAAVLBLMASK (1 << 21)
+/* Extended status bits for the ST Micro variants */
+#define MCI_ST_SDIOITMASK (1 << 22)
+#define MCI_ST_CEATAENDMASK (1 << 23)
+#define MCI_ST_BUSYENDMASK (1 << 24)
+/* Extended status bits for the STM32 variants */
+#define MCI_STM32_BUSYD0ENDMASK BIT(21)
+
+#define MMCIMASK1 0x040
+
+/* STM32 sdmmc data FIFO threshold register */
+#define MMCI_STM32_FIFOTHRR 0x044
+#define MMCI_STM32_THR_MASK GENMASK(3, 0)
+
+#define MMCIFIFOCNT 0x048
+#define MMCIFIFO 0x080 /* to 0x0bc */
+
+/* STM32 sdmmc registers for IDMA (Internal DMA) */
+#define MMCI_STM32_IDMACTRLR 0x050
+#define MMCI_STM32_IDMAEN BIT(0)
+#define MMCI_STM32_IDMALLIEN BIT(1)
+
+#define MMCI_STM32_IDMABSIZER 0x054
+
+#define MMCI_STM32_IDMABASE0R 0x058
+
+#define MMCI_STM32_IDMALAR 0x64
+#define MMCI_STM32_IDMALA_MASK GENMASK(13, 0)
+#define MMCI_STM32_ABR BIT(29)
+#define MMCI_STM32_ULS BIT(30)
+#define MMCI_STM32_ULA BIT(31)
+
+#define MMCI_STM32_IDMABAR 0x68
+
+#define MCI_IRQENABLE \
+ (MCI_CMDCRCFAILMASK | MCI_DATACRCFAILMASK | MCI_CMDTIMEOUTMASK | \
+ MCI_DATATIMEOUTMASK | MCI_TXUNDERRUNMASK | MCI_RXOVERRUNMASK | \
+ MCI_CMDRESPENDMASK | MCI_CMDSENTMASK)
+
+/* These interrupts are directed to IRQ1 when two IRQ lines are available */
+#define MCI_IRQ_PIO_MASK \
+ (MCI_RXFIFOHALFFULLMASK | MCI_RXDATAAVLBLMASK | \
+ MCI_TXFIFOHALFEMPTYMASK)
+
+#define MCI_IRQ_PIO_STM32_MASK \
+ (MCI_RXFIFOHALFFULLMASK | MCI_TXFIFOHALFEMPTYMASK)
+
+#define NR_SG 128
+
+#define MMCI_PINCTRL_STATE_OPENDRAIN "opendrain"
+
+struct clk;
+struct dma_chan;
+struct mmci_host;
+
+/**
+ * enum mmci_busy_state - enumerate the busy detect wait states
+ *
+ * This is used for the state machine waiting for different busy detect
+ * interrupts on hardware that fire a single IRQ for start and end of
+ * the busy detect phase on DAT0.
+ */
+enum mmci_busy_state {
+ MMCI_BUSY_WAITING_FOR_START_IRQ,
+ MMCI_BUSY_WAITING_FOR_END_IRQ,
+ MMCI_BUSY_DONE,
+};
+
+/**
+ * struct variant_data - MMCI variant-specific quirks
+ * @clkreg: default value for MCICLOCK register
+ * @clkreg_enable: enable value for MMCICLOCK register
+ * @clkreg_8bit_bus_enable: enable value for 8 bit bus
+ * @clkreg_neg_edge_enable: enable value for inverted data/cmd output
+ * @cmdreg_cpsm_enable: enable value for CPSM
+ * @cmdreg_lrsp_crc: enable value for long response with crc
+ * @cmdreg_srsp_crc: enable value for short response with crc
+ * @cmdreg_srsp: enable value for short response without crc
+ * @cmdreg_stop: enable value for stop and abort transmission
+ * @datalength_bits: number of bits in the MMCIDATALENGTH register
+ * @fifosize: number of bytes that can be written when MMCI_TXFIFOEMPTY
+ * is asserted (likewise for RX)
+ * @fifohalfsize: number of bytes that can be written when MCI_TXFIFOHALFEMPTY
+ * is asserted (likewise for RX)
+ * @data_cmd_enable: enable value for data commands.
+ * @st_sdio: enable ST specific SDIO logic
+ * @st_clkdiv: true if using a ST-specific clock divider algorithm
+ * @stm32_clkdiv: true if using a STM32-specific clock divider algorithm
+ * @datactrl_mask_ddrmode: ddr mode mask in datactrl register.
+ * @datactrl_mask_sdio: SDIO enable mask in datactrl register
+ * @datactrl_blocksz: block size in power of two
+ * @datactrl_any_blocksz: true if block any block sizes are accepted by
+ * hardware, such as with some SDIO traffic that send
+ * odd packets.
+ * @dma_power_of_2: DMA only works with blocks that are a power of 2.
+ * @datactrl_first: true if data must be setup before send command
+ * @datacnt_useless: true if you could not use datacnt register to read
+ * remaining data
+ * @pwrreg_powerup: power up value for MMCIPOWER register
+ * @f_max: maximum clk frequency supported by the controller.
+ * @signal_direction: input/out direction of bus signals can be indicated
+ * @pwrreg_clkgate: MMCIPOWER register must be used to gate the clock
+ * @busy_detect: true if the variant supports busy detection on DAT0.
+ * @busy_timeout: true if the variant starts data timer when the DPSM
+ * enter in Wait_R or Busy state.
+ * @busy_dpsm_flag: bitmask enabling busy detection in the DPSM
+ * @busy_detect_flag: bitmask identifying the bit in the MMCISTATUS register
+ * indicating that the card is busy
+ * @busy_detect_mask: bitmask identifying the bit in the MMCIMASK0 to mask for
+ * getting busy end detection interrupts
+ * @pwrreg_nopower: bits in MMCIPOWER don't controls ext. power supply
+ * @explicit_mclk_control: enable explicit mclk control in driver.
+ * @qcom_fifo: enables qcom specific fifo pio read logic.
+ * @qcom_dml: enables qcom specific dma glue for dma transfers.
+ * @reversed_irq_handling: handle data irq before cmd irq.
+ * @mmcimask1: true if variant have a MMCIMASK1 register.
+ * @irq_pio_mask: bitmask used to manage interrupt pio transfert in mmcimask
+ * register
+ * @start_err: bitmask identifying the STARTBITERR bit inside MMCISTATUS
+ * register.
+ * @opendrain: bitmask identifying the OPENDRAIN bit inside MMCIPOWER register
+ * @dma_lli: true if variant has dma link list feature.
+ * @stm32_idmabsize_mask: stm32 sdmmc idma buffer size.
+ */
+struct variant_data {
+ unsigned int clkreg;
+ unsigned int clkreg_enable;
+ unsigned int clkreg_8bit_bus_enable;
+ unsigned int clkreg_neg_edge_enable;
+ unsigned int cmdreg_cpsm_enable;
+ unsigned int cmdreg_lrsp_crc;
+ unsigned int cmdreg_srsp_crc;
+ unsigned int cmdreg_srsp;
+ unsigned int cmdreg_stop;
+ unsigned int datalength_bits;
+ unsigned int fifosize;
+ unsigned int fifohalfsize;
+ unsigned int data_cmd_enable;
+ unsigned int datactrl_mask_ddrmode;
+ unsigned int datactrl_mask_sdio;
+ unsigned int datactrl_blocksz;
+ u8 datactrl_any_blocksz:1;
+ u8 dma_power_of_2:1;
+ u8 datactrl_first:1;
+ u8 datacnt_useless:1;
+ u8 st_sdio:1;
+ u8 st_clkdiv:1;
+ u8 stm32_clkdiv:1;
+ u32 pwrreg_powerup;
+ u32 f_max;
+ u8 signal_direction:1;
+ u8 pwrreg_clkgate:1;
+ u8 busy_detect:1;
+ u8 busy_timeout:1;
+ u32 busy_dpsm_flag;
+ u32 busy_detect_flag;
+ u32 busy_detect_mask;
+ u8 pwrreg_nopower:1;
+ u8 explicit_mclk_control:1;
+ u8 qcom_fifo:1;
+ u8 qcom_dml:1;
+ u8 reversed_irq_handling:1;
+ u8 mmcimask1:1;
+ unsigned int irq_pio_mask;
+ u32 start_err;
+ u32 opendrain;
+ u8 dma_lli:1;
+ u32 stm32_idmabsize_mask;
+ u32 stm32_idmabsize_align;
+ void (*init)(struct mmci_host *host);
+};
+
+/* mmci variant callbacks */
+struct mmci_host_ops {
+ int (*validate_data)(struct mmci_host *host, struct mmc_data *data);
+ int (*prep_data)(struct mmci_host *host, struct mmc_data *data,
+ bool next);
+ void (*unprep_data)(struct mmci_host *host, struct mmc_data *data,
+ int err);
+ u32 (*get_datactrl_cfg)(struct mmci_host *host);
+ void (*get_next_data)(struct mmci_host *host, struct mmc_data *data);
+ int (*dma_setup)(struct mmci_host *host);
+ void (*dma_release)(struct mmci_host *host);
+ int (*dma_start)(struct mmci_host *host, unsigned int *datactrl);
+ void (*dma_finalize)(struct mmci_host *host, struct mmc_data *data);
+ void (*dma_error)(struct mmci_host *host);
+ void (*set_clkreg)(struct mmci_host *host, unsigned int desired);
+ void (*set_pwrreg)(struct mmci_host *host, unsigned int pwr);
+ bool (*busy_complete)(struct mmci_host *host, struct mmc_command *cmd, u32 status, u32 err_msk);
+ void (*pre_sig_volt_switch)(struct mmci_host *host);
+ int (*post_sig_volt_switch)(struct mmci_host *host, struct mmc_ios *ios);
+};
+
+struct mmci_host {
+ phys_addr_t phybase;
+ void __iomem *base;
+ struct mmc_request *mrq;
+ struct mmc_command *cmd;
+ struct mmc_command stop_abort;
+ struct mmc_data *data;
+ struct mmc_host *mmc;
+ struct clk *clk;
+ u8 singleirq:1;
+
+ struct reset_control *rst;
+
+ spinlock_t lock;
+
+ unsigned int mclk;
+ /* cached value of requested clk in set_ios */
+ unsigned int clock_cache;
+ unsigned int cclk;
+ u32 pwr_reg;
+ u32 pwr_reg_add;
+ u32 clk_reg;
+ u32 clk_reg_add;
+ u32 datactrl_reg;
+ enum mmci_busy_state busy_state;
+ u32 busy_status;
+ u32 mask1_reg;
+ u8 vqmmc_enabled:1;
+ struct mmci_platform_data *plat;
+ struct mmc_host_ops *mmc_ops;
+ struct mmci_host_ops *ops;
+ struct variant_data *variant;
+ void *variant_priv;
+ struct pinctrl *pinctrl;
+ struct pinctrl_state *pins_opendrain;
+
+ u8 hw_designer;
+ u8 hw_revision:4;
+
+ struct timer_list timer;
+ unsigned int oldstat;
+ u32 irq_action;
+
+ /* pio stuff */
+ struct sg_mapping_iter sg_miter;
+ unsigned int size;
+ int (*get_rx_fifocnt)(struct mmci_host *h, u32 status, int remain);
+
+ u8 use_dma:1;
+ u8 dma_in_progress:1;
+ void *dma_priv;
+
+ s32 next_cookie;
+ struct delayed_work ux500_busy_timeout_work;
+};
+
+#define dma_inprogress(host) ((host)->dma_in_progress)
+
+void mmci_write_clkreg(struct mmci_host *host, u32 clk);
+void mmci_write_pwrreg(struct mmci_host *host, u32 pwr);
+
+static inline u32 mmci_dctrl_blksz(struct mmci_host *host)
+{
+ return (ffs(host->data->blksz) - 1) << 4;
+}
+
+#ifdef CONFIG_DMA_ENGINE
+int mmci_dmae_prep_data(struct mmci_host *host, struct mmc_data *data,
+ bool next);
+void mmci_dmae_unprep_data(struct mmci_host *host, struct mmc_data *data,
+ int err);
+void mmci_dmae_get_next_data(struct mmci_host *host, struct mmc_data *data);
+int mmci_dmae_setup(struct mmci_host *host);
+void mmci_dmae_release(struct mmci_host *host);
+int mmci_dmae_start(struct mmci_host *host, unsigned int *datactrl);
+void mmci_dmae_finalize(struct mmci_host *host, struct mmc_data *data);
+void mmci_dmae_error(struct mmci_host *host);
+#endif
+
+#ifdef CONFIG_MMC_QCOM_DML
+void qcom_variant_init(struct mmci_host *host);
+#else
+static inline void qcom_variant_init(struct mmci_host *host) {}
+#endif
+
+#ifdef CONFIG_MMC_STM32_SDMMC
+void sdmmc_variant_init(struct mmci_host *host);
+#else
+static inline void sdmmc_variant_init(struct mmci_host *host) {}
+#endif