diff options
Diffstat (limited to 'drivers/mmc/host/sdhci-pci-o2micro.c')
| -rw-r--r-- | drivers/mmc/host/sdhci-pci-o2micro.c | 1066 |
1 files changed, 1066 insertions, 0 deletions
diff --git a/drivers/mmc/host/sdhci-pci-o2micro.c b/drivers/mmc/host/sdhci-pci-o2micro.c new file mode 100644 index 0000000000..7bfee28116 --- /dev/null +++ b/drivers/mmc/host/sdhci-pci-o2micro.c @@ -0,0 +1,1066 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2013 BayHub Technology Ltd. + * + * Authors: Peter Guo <peter.guo@bayhubtech.com> + * Adam Lee <adam.lee@canonical.com> + * Ernest Zhang <ernest.zhang@bayhubtech.com> + */ + +#include <linux/pci.h> +#include <linux/mmc/host.h> +#include <linux/mmc/mmc.h> +#include <linux/delay.h> +#include <linux/iopoll.h> +#include <linux/bitfield.h> + +#include "sdhci.h" +#include "sdhci-pci.h" + +/* + * O2Micro device registers + */ + +#define O2_SD_PCIE_SWITCH 0x54 +#define O2_SD_MISC_REG5 0x64 +#define O2_SD_LD0_CTRL 0x68 +#define O2_SD_DEV_CTRL 0x88 +#define O2_SD_LOCK_WP 0xD3 +#define O2_SD_TEST_REG 0xD4 +#define O2_SD_FUNC_REG0 0xDC +#define O2_SD_MULTI_VCC3V 0xEE +#define O2_SD_CLKREQ 0xEC +#define O2_SD_CAPS 0xE0 +#define O2_SD_ADMA1 0xE2 +#define O2_SD_ADMA2 0xE7 +#define O2_SD_MISC_CTRL2 0xF0 +#define O2_SD_INF_MOD 0xF1 +#define O2_SD_MISC_CTRL4 0xFC +#define O2_SD_MISC_CTRL 0x1C0 +#define O2_SD_EXP_INT_REG 0x1E0 +#define O2_SD_PWR_FORCE_L0 0x0002 +#define O2_SD_TUNING_CTRL 0x300 +#define O2_SD_PLL_SETTING 0x304 +#define O2_SD_MISC_SETTING 0x308 +#define O2_SD_CLK_SETTING 0x328 +#define O2_SD_CAP_REG2 0x330 +#define O2_SD_CAP_REG0 0x334 +#define O2_SD_UHS1_CAP_SETTING 0x33C +#define O2_SD_DELAY_CTRL 0x350 +#define O2_SD_OUTPUT_CLK_SOURCE_SWITCH 0x354 +#define O2_SD_UHS2_L1_CTRL 0x35C +#define O2_SD_FUNC_REG3 0x3E0 +#define O2_SD_FUNC_REG4 0x3E4 +#define O2_SD_PARA_SET_REG1 0x444 +#define O2_SD_VDDX_CTRL_REG 0x508 +#define O2_SD_GPIO_CTRL_REG1 0x510 +#define O2_SD_LED_ENABLE BIT(6) +#define O2_SD_FREG0_LEDOFF BIT(13) +#define O2_SD_SEL_DLL BIT(16) +#define O2_SD_FREG4_ENABLE_CLK_SET BIT(22) +#define O2_SD_PHASE_MASK GENMASK(23, 20) +#define O2_SD_FIX_PHASE FIELD_PREP(O2_SD_PHASE_MASK, 0x9) + +#define O2_SD_VENDOR_SETTING 0x110 +#define O2_SD_VENDOR_SETTING2 0x1C8 +#define O2_SD_HW_TUNING_DISABLE BIT(4) + +#define O2_PLL_DLL_WDT_CONTROL1 0x1CC +#define O2_PLL_FORCE_ACTIVE BIT(18) +#define O2_PLL_LOCK_STATUS BIT(14) +#define O2_PLL_SOFT_RESET BIT(12) +#define O2_DLL_LOCK_STATUS BIT(11) + +#define O2_SD_DETECT_SETTING 0x324 + +static const u32 dmdn_table[] = {0x2B1C0000, + 0x2C1A0000, 0x371B0000, 0x35100000}; +#define DMDN_SZ ARRAY_SIZE(dmdn_table) + +struct o2_host { + u8 dll_adjust_count; +}; + +static void sdhci_o2_wait_card_detect_stable(struct sdhci_host *host) +{ + ktime_t timeout; + u32 scratch32; + + /* Wait max 50 ms */ + timeout = ktime_add_ms(ktime_get(), 50); + while (1) { + bool timedout = ktime_after(ktime_get(), timeout); + + scratch32 = sdhci_readl(host, SDHCI_PRESENT_STATE); + if ((scratch32 & SDHCI_CARD_PRESENT) >> SDHCI_CARD_PRES_SHIFT + == (scratch32 & SDHCI_CD_LVL) >> SDHCI_CD_LVL_SHIFT) + break; + + if (timedout) { + pr_err("%s: Card Detect debounce never finished.\n", + mmc_hostname(host->mmc)); + sdhci_dumpregs(host); + return; + } + udelay(10); + } +} + +static void sdhci_o2_enable_internal_clock(struct sdhci_host *host) +{ + ktime_t timeout; + u16 scratch; + u32 scratch32; + + /* PLL software reset */ + scratch32 = sdhci_readl(host, O2_PLL_DLL_WDT_CONTROL1); + scratch32 |= O2_PLL_SOFT_RESET; + sdhci_writel(host, scratch32, O2_PLL_DLL_WDT_CONTROL1); + udelay(1); + scratch32 &= ~(O2_PLL_SOFT_RESET); + sdhci_writel(host, scratch32, O2_PLL_DLL_WDT_CONTROL1); + + /* PLL force active */ + scratch32 |= O2_PLL_FORCE_ACTIVE; + sdhci_writel(host, scratch32, O2_PLL_DLL_WDT_CONTROL1); + + /* Wait max 20 ms */ + timeout = ktime_add_ms(ktime_get(), 20); + while (1) { + bool timedout = ktime_after(ktime_get(), timeout); + + scratch = sdhci_readw(host, O2_PLL_DLL_WDT_CONTROL1); + if (scratch & O2_PLL_LOCK_STATUS) + break; + if (timedout) { + pr_err("%s: Internal clock never stabilised.\n", + mmc_hostname(host->mmc)); + sdhci_dumpregs(host); + goto out; + } + udelay(10); + } + + /* Wait for card detect finish */ + udelay(1); + sdhci_o2_wait_card_detect_stable(host); + +out: + /* Cancel PLL force active */ + scratch32 = sdhci_readl(host, O2_PLL_DLL_WDT_CONTROL1); + scratch32 &= ~O2_PLL_FORCE_ACTIVE; + sdhci_writel(host, scratch32, O2_PLL_DLL_WDT_CONTROL1); +} + +static int sdhci_o2_get_cd(struct mmc_host *mmc) +{ + struct sdhci_host *host = mmc_priv(mmc); + + if (!(sdhci_readw(host, O2_PLL_DLL_WDT_CONTROL1) & O2_PLL_LOCK_STATUS)) + sdhci_o2_enable_internal_clock(host); + else + sdhci_o2_wait_card_detect_stable(host); + + return !!(sdhci_readl(host, SDHCI_PRESENT_STATE) & SDHCI_CARD_PRESENT); +} + +static void o2_pci_set_baseclk(struct sdhci_pci_chip *chip, u32 value) +{ + u32 scratch_32; + + pci_read_config_dword(chip->pdev, + O2_SD_PLL_SETTING, &scratch_32); + + scratch_32 &= 0x0000FFFF; + scratch_32 |= value; + + pci_write_config_dword(chip->pdev, + O2_SD_PLL_SETTING, scratch_32); +} + +static u32 sdhci_o2_pll_dll_wdt_control(struct sdhci_host *host) +{ + return sdhci_readl(host, O2_PLL_DLL_WDT_CONTROL1); +} + +/* + * This function is used to detect dll lock status. + * Since the dll lock status bit will toggle randomly + * with very short interval which needs to be polled + * as fast as possible. Set sleep_us as 1 microsecond. + */ +static int sdhci_o2_wait_dll_detect_lock(struct sdhci_host *host) +{ + u32 scratch32 = 0; + + return readx_poll_timeout(sdhci_o2_pll_dll_wdt_control, host, + scratch32, !(scratch32 & O2_DLL_LOCK_STATUS), 1, 1000000); +} + +static void sdhci_o2_set_tuning_mode(struct sdhci_host *host) +{ + u16 reg; + + /* enable hardware tuning */ + reg = sdhci_readw(host, O2_SD_VENDOR_SETTING); + reg &= ~O2_SD_HW_TUNING_DISABLE; + sdhci_writew(host, reg, O2_SD_VENDOR_SETTING); +} + +static void __sdhci_o2_execute_tuning(struct sdhci_host *host, u32 opcode) +{ + int i; + + sdhci_send_tuning(host, opcode); + + for (i = 0; i < 150; i++) { + u16 ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2); + + if (!(ctrl & SDHCI_CTRL_EXEC_TUNING)) { + if (ctrl & SDHCI_CTRL_TUNED_CLK) { + host->tuning_done = true; + return; + } + pr_warn("%s: HW tuning failed !\n", + mmc_hostname(host->mmc)); + break; + } + + mdelay(1); + } + + pr_info("%s: Tuning failed, falling back to fixed sampling clock\n", + mmc_hostname(host->mmc)); + sdhci_reset_tuning(host); +} + +/* + * This function is used to fix o2 dll shift issue. + * It isn't necessary to detect card present before recovery. + * Firstly, it is used by bht emmc card, which is embedded. + * Second, before call recovery card present will be detected + * outside of the execute tuning function. + */ +static int sdhci_o2_dll_recovery(struct sdhci_host *host) +{ + int ret = 0; + u8 scratch_8 = 0; + u32 scratch_32 = 0; + struct sdhci_pci_slot *slot = sdhci_priv(host); + struct sdhci_pci_chip *chip = slot->chip; + struct o2_host *o2_host = sdhci_pci_priv(slot); + + /* UnLock WP */ + pci_read_config_byte(chip->pdev, + O2_SD_LOCK_WP, &scratch_8); + scratch_8 &= 0x7f; + pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch_8); + while (o2_host->dll_adjust_count < DMDN_SZ && !ret) { + /* Disable clock */ + sdhci_writeb(host, 0, SDHCI_CLOCK_CONTROL); + + /* PLL software reset */ + scratch_32 = sdhci_readl(host, O2_PLL_DLL_WDT_CONTROL1); + scratch_32 |= O2_PLL_SOFT_RESET; + sdhci_writel(host, scratch_32, O2_PLL_DLL_WDT_CONTROL1); + + pci_read_config_dword(chip->pdev, + O2_SD_FUNC_REG4, + &scratch_32); + /* Enable Base Clk setting change */ + scratch_32 |= O2_SD_FREG4_ENABLE_CLK_SET; + pci_write_config_dword(chip->pdev, O2_SD_FUNC_REG4, scratch_32); + o2_pci_set_baseclk(chip, dmdn_table[o2_host->dll_adjust_count]); + + /* Enable internal clock */ + scratch_8 = SDHCI_CLOCK_INT_EN; + sdhci_writeb(host, scratch_8, SDHCI_CLOCK_CONTROL); + + if (sdhci_o2_get_cd(host->mmc)) { + /* + * need wait at least 5ms for dll status stable, + * after enable internal clock + */ + usleep_range(5000, 6000); + if (sdhci_o2_wait_dll_detect_lock(host)) { + scratch_8 |= SDHCI_CLOCK_CARD_EN; + sdhci_writeb(host, scratch_8, + SDHCI_CLOCK_CONTROL); + ret = 1; + } else { + pr_warn("%s: DLL unlocked when dll_adjust_count is %d.\n", + mmc_hostname(host->mmc), + o2_host->dll_adjust_count); + } + } else { + pr_err("%s: card present detect failed.\n", + mmc_hostname(host->mmc)); + break; + } + + o2_host->dll_adjust_count++; + } + if (!ret && o2_host->dll_adjust_count == DMDN_SZ) + pr_err("%s: DLL adjust over max times\n", + mmc_hostname(host->mmc)); + /* Lock WP */ + pci_read_config_byte(chip->pdev, + O2_SD_LOCK_WP, &scratch_8); + scratch_8 |= 0x80; + pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch_8); + return ret; +} + +static int sdhci_o2_execute_tuning(struct mmc_host *mmc, u32 opcode) +{ + struct sdhci_host *host = mmc_priv(mmc); + struct sdhci_pci_slot *slot = sdhci_priv(host); + struct sdhci_pci_chip *chip = slot->chip; + int current_bus_width = 0; + u32 scratch32 = 0; + u16 scratch = 0; + u8 scratch_8 = 0; + u32 reg_val; + + /* + * This handler implements the hardware tuning that is specific to + * this controller. Fall back to the standard method for other TIMING. + */ + if ((host->timing != MMC_TIMING_MMC_HS200) && + (host->timing != MMC_TIMING_UHS_SDR104) && + (host->timing != MMC_TIMING_UHS_SDR50)) + return sdhci_execute_tuning(mmc, opcode); + + if (WARN_ON(!mmc_op_tuning(opcode))) + return -EINVAL; + + /* Force power mode enter L0 */ + scratch = sdhci_readw(host, O2_SD_MISC_CTRL); + scratch |= O2_SD_PWR_FORCE_L0; + sdhci_writew(host, scratch, O2_SD_MISC_CTRL); + + /* Update output phase */ + switch (chip->pdev->device) { + case PCI_DEVICE_ID_O2_SDS0: + case PCI_DEVICE_ID_O2_SEABIRD0: + case PCI_DEVICE_ID_O2_SEABIRD1: + case PCI_DEVICE_ID_O2_SDS1: + case PCI_DEVICE_ID_O2_FUJIN2: + /* Stop clk */ + reg_val = sdhci_readw(host, SDHCI_CLOCK_CONTROL); + reg_val &= ~SDHCI_CLOCK_CARD_EN; + sdhci_writew(host, reg_val, SDHCI_CLOCK_CONTROL); + + if (host->timing == MMC_TIMING_MMC_HS200 || + host->timing == MMC_TIMING_UHS_SDR104) { + /* UnLock WP */ + pci_read_config_byte(chip->pdev, O2_SD_LOCK_WP, &scratch_8); + scratch_8 &= 0x7f; + pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch_8); + + /* Set pcr 0x354[16] to choose dll clock, and set the default phase */ + pci_read_config_dword(chip->pdev, O2_SD_OUTPUT_CLK_SOURCE_SWITCH, ®_val); + reg_val &= ~(O2_SD_SEL_DLL | O2_SD_PHASE_MASK); + reg_val |= (O2_SD_SEL_DLL | O2_SD_FIX_PHASE); + pci_write_config_dword(chip->pdev, O2_SD_OUTPUT_CLK_SOURCE_SWITCH, reg_val); + + /* Lock WP */ + pci_read_config_byte(chip->pdev, O2_SD_LOCK_WP, &scratch_8); + scratch_8 |= 0x80; + pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch_8); + } + + /* Start clk */ + reg_val = sdhci_readw(host, SDHCI_CLOCK_CONTROL); + reg_val |= SDHCI_CLOCK_CARD_EN; + sdhci_writew(host, reg_val, SDHCI_CLOCK_CONTROL); + break; + default: + break; + } + + /* wait DLL lock, timeout value 5ms */ + if (readx_poll_timeout(sdhci_o2_pll_dll_wdt_control, host, + scratch32, (scratch32 & O2_DLL_LOCK_STATUS), 1, 5000)) + pr_warn("%s: DLL can't lock in 5ms after force L0 during tuning.\n", + mmc_hostname(host->mmc)); + /* + * Judge the tuning reason, whether caused by dll shift + * If cause by dll shift, should call sdhci_o2_dll_recovery + */ + if (!sdhci_o2_wait_dll_detect_lock(host)) + if (!sdhci_o2_dll_recovery(host)) { + pr_err("%s: o2 dll recovery failed\n", + mmc_hostname(host->mmc)); + return -EINVAL; + } + /* + * o2 sdhci host didn't support 8bit emmc tuning + */ + if (mmc->ios.bus_width == MMC_BUS_WIDTH_8) { + current_bus_width = mmc->ios.bus_width; + mmc->ios.bus_width = MMC_BUS_WIDTH_4; + sdhci_set_bus_width(host, MMC_BUS_WIDTH_4); + } + + sdhci_o2_set_tuning_mode(host); + + sdhci_start_tuning(host); + + __sdhci_o2_execute_tuning(host, opcode); + + sdhci_end_tuning(host); + + if (current_bus_width == MMC_BUS_WIDTH_8) { + mmc->ios.bus_width = MMC_BUS_WIDTH_8; + sdhci_set_bus_width(host, current_bus_width); + } + + /* Cancel force power mode enter L0 */ + scratch = sdhci_readw(host, O2_SD_MISC_CTRL); + scratch &= ~(O2_SD_PWR_FORCE_L0); + sdhci_writew(host, scratch, O2_SD_MISC_CTRL); + + sdhci_reset(host, SDHCI_RESET_CMD); + sdhci_reset(host, SDHCI_RESET_DATA); + + host->flags &= ~SDHCI_HS400_TUNING; + return 0; +} + +static void o2_pci_led_enable(struct sdhci_pci_chip *chip) +{ + int ret; + u32 scratch_32; + + /* Set led of SD host function enable */ + ret = pci_read_config_dword(chip->pdev, + O2_SD_FUNC_REG0, &scratch_32); + if (ret) + return; + + scratch_32 &= ~O2_SD_FREG0_LEDOFF; + pci_write_config_dword(chip->pdev, + O2_SD_FUNC_REG0, scratch_32); + + ret = pci_read_config_dword(chip->pdev, + O2_SD_TEST_REG, &scratch_32); + if (ret) + return; + + scratch_32 |= O2_SD_LED_ENABLE; + pci_write_config_dword(chip->pdev, + O2_SD_TEST_REG, scratch_32); +} + +static void sdhci_pci_o2_fujin2_pci_init(struct sdhci_pci_chip *chip) +{ + u32 scratch_32; + int ret; + /* Improve write performance for SD3.0 */ + ret = pci_read_config_dword(chip->pdev, O2_SD_DEV_CTRL, &scratch_32); + if (ret) + return; + scratch_32 &= ~((1 << 12) | (1 << 13) | (1 << 14)); + pci_write_config_dword(chip->pdev, O2_SD_DEV_CTRL, scratch_32); + + /* Enable Link abnormal reset generating Reset */ + ret = pci_read_config_dword(chip->pdev, O2_SD_MISC_REG5, &scratch_32); + if (ret) + return; + scratch_32 &= ~((1 << 19) | (1 << 11)); + scratch_32 |= (1 << 10); + pci_write_config_dword(chip->pdev, O2_SD_MISC_REG5, scratch_32); + + /* set card power over current protection */ + ret = pci_read_config_dword(chip->pdev, O2_SD_TEST_REG, &scratch_32); + if (ret) + return; + scratch_32 |= (1 << 4); + pci_write_config_dword(chip->pdev, O2_SD_TEST_REG, scratch_32); + + /* adjust the output delay for SD mode */ + pci_write_config_dword(chip->pdev, O2_SD_DELAY_CTRL, 0x00002492); + + /* Set the output voltage setting of Aux 1.2v LDO */ + ret = pci_read_config_dword(chip->pdev, O2_SD_LD0_CTRL, &scratch_32); + if (ret) + return; + scratch_32 &= ~(3 << 12); + pci_write_config_dword(chip->pdev, O2_SD_LD0_CTRL, scratch_32); + + /* Set Max power supply capability of SD host */ + ret = pci_read_config_dword(chip->pdev, O2_SD_CAP_REG0, &scratch_32); + if (ret) + return; + scratch_32 &= ~(0x01FE); + scratch_32 |= 0x00CC; + pci_write_config_dword(chip->pdev, O2_SD_CAP_REG0, scratch_32); + /* Set DLL Tuning Window */ + ret = pci_read_config_dword(chip->pdev, + O2_SD_TUNING_CTRL, &scratch_32); + if (ret) + return; + scratch_32 &= ~(0x000000FF); + scratch_32 |= 0x00000066; + pci_write_config_dword(chip->pdev, O2_SD_TUNING_CTRL, scratch_32); + + /* Set UHS2 T_EIDLE */ + ret = pci_read_config_dword(chip->pdev, + O2_SD_UHS2_L1_CTRL, &scratch_32); + if (ret) + return; + scratch_32 &= ~(0x000000FC); + scratch_32 |= 0x00000084; + pci_write_config_dword(chip->pdev, O2_SD_UHS2_L1_CTRL, scratch_32); + + /* Set UHS2 Termination */ + ret = pci_read_config_dword(chip->pdev, O2_SD_FUNC_REG3, &scratch_32); + if (ret) + return; + scratch_32 &= ~((1 << 21) | (1 << 30)); + + pci_write_config_dword(chip->pdev, O2_SD_FUNC_REG3, scratch_32); + + /* Set L1 Entrance Timer */ + ret = pci_read_config_dword(chip->pdev, O2_SD_CAPS, &scratch_32); + if (ret) + return; + scratch_32 &= ~(0xf0000000); + scratch_32 |= 0x30000000; + pci_write_config_dword(chip->pdev, O2_SD_CAPS, scratch_32); + + ret = pci_read_config_dword(chip->pdev, + O2_SD_MISC_CTRL4, &scratch_32); + if (ret) + return; + scratch_32 &= ~(0x000f0000); + scratch_32 |= 0x00080000; + pci_write_config_dword(chip->pdev, O2_SD_MISC_CTRL4, scratch_32); +} + +static void sdhci_pci_o2_enable_msi(struct sdhci_pci_chip *chip, + struct sdhci_host *host) +{ + int ret; + + ret = pci_find_capability(chip->pdev, PCI_CAP_ID_MSI); + if (!ret) { + pr_info("%s: unsupported MSI, use INTx irq\n", + mmc_hostname(host->mmc)); + return; + } + + ret = pci_alloc_irq_vectors(chip->pdev, 1, 1, + PCI_IRQ_MSI | PCI_IRQ_MSIX); + if (ret < 0) { + pr_err("%s: enable PCI MSI failed, err=%d\n", + mmc_hostname(host->mmc), ret); + return; + } + + host->irq = pci_irq_vector(chip->pdev, 0); +} + +static void sdhci_o2_enable_clk(struct sdhci_host *host, u16 clk) +{ + /* Enable internal clock */ + clk |= SDHCI_CLOCK_INT_EN; + sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL); + + sdhci_o2_enable_internal_clock(host); + if (sdhci_o2_get_cd(host->mmc)) { + clk |= SDHCI_CLOCK_CARD_EN; + sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL); + } +} + +static void sdhci_pci_o2_set_clock(struct sdhci_host *host, unsigned int clock) +{ + u16 clk; + u8 scratch; + u32 scratch_32; + u32 dmdn_208m, dmdn_200m; + struct sdhci_pci_slot *slot = sdhci_priv(host); + struct sdhci_pci_chip *chip = slot->chip; + + host->mmc->actual_clock = 0; + + sdhci_writew(host, 0, SDHCI_CLOCK_CONTROL); + + if (clock == 0) + return; + + /* UnLock WP */ + pci_read_config_byte(chip->pdev, O2_SD_LOCK_WP, &scratch); + scratch &= 0x7f; + pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch); + + if (chip->pdev->device == PCI_DEVICE_ID_O2_GG8_9860 || + chip->pdev->device == PCI_DEVICE_ID_O2_GG8_9861 || + chip->pdev->device == PCI_DEVICE_ID_O2_GG8_9862 || + chip->pdev->device == PCI_DEVICE_ID_O2_GG8_9863) { + dmdn_208m = 0x2c500000; + dmdn_200m = 0x25200000; + } else { + dmdn_208m = 0x2c280000; + dmdn_200m = 0x25100000; + } + + if ((host->timing == MMC_TIMING_UHS_SDR104) && (clock == 200000000)) { + pci_read_config_dword(chip->pdev, O2_SD_PLL_SETTING, &scratch_32); + + if ((scratch_32 & 0xFFFF0000) != dmdn_208m) + o2_pci_set_baseclk(chip, dmdn_208m); + } else { + pci_read_config_dword(chip->pdev, O2_SD_PLL_SETTING, &scratch_32); + + if ((scratch_32 & 0xFFFF0000) != dmdn_200m) + o2_pci_set_baseclk(chip, dmdn_200m); + } + + pci_read_config_dword(chip->pdev, O2_SD_OUTPUT_CLK_SOURCE_SWITCH, &scratch_32); + scratch_32 &= ~(O2_SD_SEL_DLL | O2_SD_PHASE_MASK); + pci_write_config_dword(chip->pdev, O2_SD_OUTPUT_CLK_SOURCE_SWITCH, scratch_32); + + /* Lock WP */ + pci_read_config_byte(chip->pdev, O2_SD_LOCK_WP, &scratch); + scratch |= 0x80; + pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch); + + clk = sdhci_calc_clk(host, clock, &host->mmc->actual_clock); + sdhci_o2_enable_clk(host, clk); +} + +static int sdhci_pci_o2_init_sd_express(struct mmc_host *mmc, struct mmc_ios *ios) +{ + struct sdhci_host *host = mmc_priv(mmc); + struct sdhci_pci_slot *slot = sdhci_priv(host); + struct sdhci_pci_chip *chip = slot->chip; + u8 scratch8; + u16 scratch16; + int ret; + + /* Disable clock */ + sdhci_writeb(host, 0, SDHCI_CLOCK_CONTROL); + + /* Set VDD2 voltage*/ + scratch8 = sdhci_readb(host, SDHCI_POWER_CONTROL); + scratch8 &= 0x0F; + if (host->mmc->ios.timing == MMC_TIMING_SD_EXP_1_2V && + host->mmc->caps2 & MMC_CAP2_SD_EXP_1_2V) { + scratch8 |= SDHCI_VDD2_POWER_ON | SDHCI_VDD2_POWER_120; + } else { + scratch8 |= SDHCI_VDD2_POWER_ON | SDHCI_VDD2_POWER_180; + } + + sdhci_writeb(host, scratch8, SDHCI_POWER_CONTROL); + + /* UnLock WP */ + pci_read_config_byte(chip->pdev, O2_SD_LOCK_WP, &scratch8); + scratch8 &= 0x7f; + pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch8); + + /* Wait for express card clkreqn assert */ + ret = read_poll_timeout(sdhci_readb, scratch8, !(scratch8 & BIT(0)), + 1, 30000, false, host, O2_SD_EXP_INT_REG); + + if (!ret) { + /* Switch to PCIe mode */ + scratch16 = sdhci_readw(host, O2_SD_PCIE_SWITCH); + scratch16 |= BIT(8); + sdhci_writew(host, scratch16, O2_SD_PCIE_SWITCH); + } else { + /* Power off VDD2 voltage*/ + scratch8 = sdhci_readb(host, SDHCI_POWER_CONTROL); + scratch8 &= 0x0F; + sdhci_writeb(host, scratch8, SDHCI_POWER_CONTROL); + + /* Keep mode as UHSI */ + pci_read_config_word(chip->pdev, O2_SD_PARA_SET_REG1, &scratch16); + scratch16 &= ~BIT(11); + pci_write_config_word(chip->pdev, O2_SD_PARA_SET_REG1, scratch16); + + host->mmc->ios.timing = MMC_TIMING_LEGACY; + pr_info("%s: Express card initialization failed, falling back to Legacy\n", + mmc_hostname(host->mmc)); + } + /* Lock WP */ + pci_read_config_byte(chip->pdev, O2_SD_LOCK_WP, &scratch8); + scratch8 |= 0x80; + pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch8); + + return 0; +} + +static int sdhci_pci_o2_probe_slot(struct sdhci_pci_slot *slot) +{ + struct sdhci_pci_chip *chip; + struct sdhci_host *host; + struct o2_host *o2_host = sdhci_pci_priv(slot); + u32 reg, caps; + int ret; + + chip = slot->chip; + host = slot->host; + + o2_host->dll_adjust_count = 0; + caps = sdhci_readl(host, SDHCI_CAPABILITIES); + + /* + * mmc_select_bus_width() will test the bus to determine the actual bus + * width. + */ + if (caps & SDHCI_CAN_DO_8BIT) + host->mmc->caps |= MMC_CAP_8_BIT_DATA; + + host->quirks2 |= SDHCI_QUIRK2_BROKEN_DDR50; + + sdhci_pci_o2_enable_msi(chip, host); + + host->mmc_host_ops.execute_tuning = sdhci_o2_execute_tuning; + switch (chip->pdev->device) { + case PCI_DEVICE_ID_O2_SDS0: + case PCI_DEVICE_ID_O2_SEABIRD0: + case PCI_DEVICE_ID_O2_SEABIRD1: + case PCI_DEVICE_ID_O2_SDS1: + case PCI_DEVICE_ID_O2_FUJIN2: + reg = sdhci_readl(host, O2_SD_VENDOR_SETTING); + if (reg & 0x1) + host->quirks |= SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12; + + if (chip->pdev->device == PCI_DEVICE_ID_O2_SEABIRD0) { + ret = pci_read_config_dword(chip->pdev, + O2_SD_MISC_SETTING, ®); + if (ret) + return -EIO; + if (reg & (1 << 4)) { + pr_info("%s: emmc 1.8v flag is set, force 1.8v signaling voltage\n", + mmc_hostname(host->mmc)); + host->flags &= ~SDHCI_SIGNALING_330; + host->flags |= SDHCI_SIGNALING_180; + host->mmc->caps2 |= MMC_CAP2_NO_SD; + host->mmc->caps2 |= MMC_CAP2_NO_SDIO; + pci_write_config_dword(chip->pdev, + O2_SD_DETECT_SETTING, 3); + } + + slot->host->mmc_host_ops.get_cd = sdhci_o2_get_cd; + } + + if (chip->pdev->device == PCI_DEVICE_ID_O2_SEABIRD1) { + slot->host->mmc_host_ops.get_cd = sdhci_o2_get_cd; + host->mmc->caps2 |= MMC_CAP2_NO_SDIO; + host->quirks2 |= SDHCI_QUIRK2_PRESET_VALUE_BROKEN; + } + + if (chip->pdev->device != PCI_DEVICE_ID_O2_FUJIN2) + break; + /* set dll watch dog timer */ + reg = sdhci_readl(host, O2_SD_VENDOR_SETTING2); + reg |= (1 << 12); + sdhci_writel(host, reg, O2_SD_VENDOR_SETTING2); + break; + case PCI_DEVICE_ID_O2_GG8_9860: + case PCI_DEVICE_ID_O2_GG8_9861: + case PCI_DEVICE_ID_O2_GG8_9862: + case PCI_DEVICE_ID_O2_GG8_9863: + host->mmc->caps2 |= MMC_CAP2_NO_SDIO | MMC_CAP2_SD_EXP | MMC_CAP2_SD_EXP_1_2V; + host->mmc->caps |= MMC_CAP_HW_RESET; + host->quirks2 |= SDHCI_QUIRK2_PRESET_VALUE_BROKEN; + slot->host->mmc_host_ops.get_cd = sdhci_o2_get_cd; + host->mmc_host_ops.init_sd_express = sdhci_pci_o2_init_sd_express; + break; + default: + break; + } + + return 0; +} + +static int sdhci_pci_o2_probe(struct sdhci_pci_chip *chip) +{ + int ret; + u8 scratch; + u16 scratch16; + u32 scratch_32; + + switch (chip->pdev->device) { + case PCI_DEVICE_ID_O2_8220: + case PCI_DEVICE_ID_O2_8221: + case PCI_DEVICE_ID_O2_8320: + case PCI_DEVICE_ID_O2_8321: + /* This extra setup is required due to broken ADMA. */ + ret = pci_read_config_byte(chip->pdev, + O2_SD_LOCK_WP, &scratch); + if (ret) + return ret; + scratch &= 0x7f; + pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch); + + /* Set Multi 3 to VCC3V# */ + pci_write_config_byte(chip->pdev, O2_SD_MULTI_VCC3V, 0x08); + + /* Disable CLK_REQ# support after media DET */ + ret = pci_read_config_byte(chip->pdev, + O2_SD_CLKREQ, &scratch); + if (ret) + return ret; + scratch |= 0x20; + pci_write_config_byte(chip->pdev, O2_SD_CLKREQ, scratch); + + /* Choose capabilities, enable SDMA. We have to write 0x01 + * to the capabilities register first to unlock it. + */ + ret = pci_read_config_byte(chip->pdev, O2_SD_CAPS, &scratch); + if (ret) + return ret; + scratch |= 0x01; + pci_write_config_byte(chip->pdev, O2_SD_CAPS, scratch); + pci_write_config_byte(chip->pdev, O2_SD_CAPS, 0x73); + + /* Disable ADMA1/2 */ + pci_write_config_byte(chip->pdev, O2_SD_ADMA1, 0x39); + pci_write_config_byte(chip->pdev, O2_SD_ADMA2, 0x08); + + /* Disable the infinite transfer mode */ + ret = pci_read_config_byte(chip->pdev, + O2_SD_INF_MOD, &scratch); + if (ret) + return ret; + scratch |= 0x08; + pci_write_config_byte(chip->pdev, O2_SD_INF_MOD, scratch); + + /* Lock WP */ + ret = pci_read_config_byte(chip->pdev, + O2_SD_LOCK_WP, &scratch); + if (ret) + return ret; + scratch |= 0x80; + pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch); + break; + case PCI_DEVICE_ID_O2_SDS0: + case PCI_DEVICE_ID_O2_SDS1: + case PCI_DEVICE_ID_O2_FUJIN2: + /* UnLock WP */ + ret = pci_read_config_byte(chip->pdev, + O2_SD_LOCK_WP, &scratch); + if (ret) + return ret; + + scratch &= 0x7f; + pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch); + + /* DevId=8520 subId= 0x11 or 0x12 Type Chip support */ + if (chip->pdev->device == PCI_DEVICE_ID_O2_FUJIN2) { + ret = pci_read_config_dword(chip->pdev, + O2_SD_FUNC_REG0, + &scratch_32); + if (ret) + return ret; + scratch_32 = ((scratch_32 & 0xFF000000) >> 24); + + /* Check Whether subId is 0x11 or 0x12 */ + if ((scratch_32 == 0x11) || (scratch_32 == 0x12)) { + scratch_32 = 0x25100000; + + o2_pci_set_baseclk(chip, scratch_32); + ret = pci_read_config_dword(chip->pdev, + O2_SD_FUNC_REG4, + &scratch_32); + if (ret) + return ret; + + /* Enable Base Clk setting change */ + scratch_32 |= O2_SD_FREG4_ENABLE_CLK_SET; + pci_write_config_dword(chip->pdev, + O2_SD_FUNC_REG4, + scratch_32); + + /* Set Tuning Window to 4 */ + pci_write_config_byte(chip->pdev, + O2_SD_TUNING_CTRL, 0x44); + + break; + } + } + + /* Enable 8520 led function */ + o2_pci_led_enable(chip); + + /* Set timeout CLK */ + ret = pci_read_config_dword(chip->pdev, + O2_SD_CLK_SETTING, &scratch_32); + if (ret) + return ret; + + scratch_32 &= ~(0xFF00); + scratch_32 |= 0x07E0C800; + pci_write_config_dword(chip->pdev, + O2_SD_CLK_SETTING, scratch_32); + + ret = pci_read_config_dword(chip->pdev, + O2_SD_CLKREQ, &scratch_32); + if (ret) + return ret; + scratch_32 |= 0x3; + pci_write_config_dword(chip->pdev, O2_SD_CLKREQ, scratch_32); + + ret = pci_read_config_dword(chip->pdev, + O2_SD_PLL_SETTING, &scratch_32); + if (ret) + return ret; + + scratch_32 &= ~(0x1F3F070E); + scratch_32 |= 0x18270106; + pci_write_config_dword(chip->pdev, + O2_SD_PLL_SETTING, scratch_32); + + /* Disable UHS1 funciton */ + ret = pci_read_config_dword(chip->pdev, + O2_SD_CAP_REG2, &scratch_32); + if (ret) + return ret; + scratch_32 &= ~(0xE0); + pci_write_config_dword(chip->pdev, + O2_SD_CAP_REG2, scratch_32); + + if (chip->pdev->device == PCI_DEVICE_ID_O2_FUJIN2) + sdhci_pci_o2_fujin2_pci_init(chip); + + /* Lock WP */ + ret = pci_read_config_byte(chip->pdev, + O2_SD_LOCK_WP, &scratch); + if (ret) + return ret; + scratch |= 0x80; + pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch); + break; + case PCI_DEVICE_ID_O2_SEABIRD0: + case PCI_DEVICE_ID_O2_SEABIRD1: + /* UnLock WP */ + ret = pci_read_config_byte(chip->pdev, + O2_SD_LOCK_WP, &scratch); + if (ret) + return ret; + + scratch &= 0x7f; + pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch); + + ret = pci_read_config_dword(chip->pdev, + O2_SD_PLL_SETTING, &scratch_32); + if (ret) + return ret; + + if ((scratch_32 & 0xff000000) == 0x01000000) { + scratch_32 &= 0x0000FFFF; + scratch_32 |= 0x1F340000; + + pci_write_config_dword(chip->pdev, + O2_SD_PLL_SETTING, scratch_32); + } else { + scratch_32 &= 0x0000FFFF; + scratch_32 |= 0x25100000; + + pci_write_config_dword(chip->pdev, + O2_SD_PLL_SETTING, scratch_32); + + ret = pci_read_config_dword(chip->pdev, + O2_SD_FUNC_REG4, + &scratch_32); + if (ret) + return ret; + scratch_32 |= (1 << 22); + pci_write_config_dword(chip->pdev, + O2_SD_FUNC_REG4, scratch_32); + } + + /* Set Tuning Windows to 5 */ + pci_write_config_byte(chip->pdev, + O2_SD_TUNING_CTRL, 0x55); + //Adjust 1st and 2nd CD debounce time + pci_read_config_dword(chip->pdev, O2_SD_MISC_CTRL2, &scratch_32); + scratch_32 &= 0xFFE7FFFF; + scratch_32 |= 0x00180000; + pci_write_config_dword(chip->pdev, O2_SD_MISC_CTRL2, scratch_32); + pci_write_config_dword(chip->pdev, O2_SD_DETECT_SETTING, 1); + /* Lock WP */ + ret = pci_read_config_byte(chip->pdev, + O2_SD_LOCK_WP, &scratch); + if (ret) + return ret; + scratch |= 0x80; + pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch); + break; + case PCI_DEVICE_ID_O2_GG8_9860: + case PCI_DEVICE_ID_O2_GG8_9861: + case PCI_DEVICE_ID_O2_GG8_9862: + case PCI_DEVICE_ID_O2_GG8_9863: + /* UnLock WP */ + ret = pci_read_config_byte(chip->pdev, O2_SD_LOCK_WP, &scratch); + if (ret) + return ret; + scratch &= 0x7f; + pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch); + + /* Select mode switch source as software control */ + pci_read_config_word(chip->pdev, O2_SD_PARA_SET_REG1, &scratch16); + scratch16 &= 0xF8FF; + scratch16 |= BIT(9); + pci_write_config_word(chip->pdev, O2_SD_PARA_SET_REG1, scratch16); + + /* set VDD1 supply source */ + pci_read_config_word(chip->pdev, O2_SD_VDDX_CTRL_REG, &scratch16); + scratch16 &= 0xFFE3; + scratch16 |= BIT(3); + pci_write_config_word(chip->pdev, O2_SD_VDDX_CTRL_REG, scratch16); + + /* Set host drive strength*/ + scratch16 = 0x0025; + pci_write_config_word(chip->pdev, O2_SD_PLL_SETTING, scratch16); + + /* Set output delay*/ + pci_read_config_dword(chip->pdev, O2_SD_OUTPUT_CLK_SOURCE_SWITCH, &scratch_32); + scratch_32 &= 0xFF0FFF00; + scratch_32 |= 0x00B0003B; + pci_write_config_dword(chip->pdev, O2_SD_OUTPUT_CLK_SOURCE_SWITCH, scratch_32); + + /* Lock WP */ + ret = pci_read_config_byte(chip->pdev, O2_SD_LOCK_WP, &scratch); + if (ret) + return ret; + scratch |= 0x80; + pci_write_config_byte(chip->pdev, O2_SD_LOCK_WP, scratch); + break; + } + + return 0; +} + +#ifdef CONFIG_PM_SLEEP +static int sdhci_pci_o2_resume(struct sdhci_pci_chip *chip) +{ + sdhci_pci_o2_probe(chip); + return sdhci_pci_resume_host(chip); +} +#endif + +static const struct sdhci_ops sdhci_pci_o2_ops = { + .set_clock = sdhci_pci_o2_set_clock, + .enable_dma = sdhci_pci_enable_dma, + .set_bus_width = sdhci_set_bus_width, + .reset = sdhci_reset, + .set_uhs_signaling = sdhci_set_uhs_signaling, +}; + +const struct sdhci_pci_fixes sdhci_o2 = { + .probe = sdhci_pci_o2_probe, + .quirks = SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC, + .quirks2 = SDHCI_QUIRK2_CLEAR_TRANSFERMODE_REG_BEFORE_CMD, + .probe_slot = sdhci_pci_o2_probe_slot, +#ifdef CONFIG_PM_SLEEP + .resume = sdhci_pci_o2_resume, +#endif + .ops = &sdhci_pci_o2_ops, + .priv_size = sizeof(struct o2_host), +}; |