1 files changed, 790 insertions, 0 deletions

diff --git a/drivers/mmc/host/sdhci-s3c.c b/drivers/mmc/host/sdhci-s3c.c
new file mode 100644
index 0000000000..0e8a8ac14e
--- /dev/null
+++ b/drivers/mmc/host/sdhci-s3c.c
@@ -0,0 +1,790 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/* linux/drivers/mmc/host/sdhci-s3c.c
+ *
+ * Copyright 2008 Openmoko Inc.
+ * Copyright 2008 Simtec Electronics
+ *      Ben Dooks <ben@simtec.co.uk>
+ *      http://armlinux.simtec.co.uk/
+ *
+ * SDHCI (HSMMC) support for Samsung SoC
+ */
+
+#include <linux/spinlock.h>
+#include <linux/delay.h>
+#include <linux/dma-mapping.h>
+#include <linux/platform_device.h>
+#include <linux/platform_data/mmc-sdhci-s3c.h>
+#include <linux/slab.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_gpio.h>
+#include <linux/pm.h>
+#include <linux/pm_runtime.h>
+
+#include <linux/mmc/host.h>
+
+#include "sdhci.h"
+
+#define MAX_BUS_CLK	(4)
+
+#define S3C_SDHCI_CONTROL2			(0x80)
+#define S3C_SDHCI_CONTROL3			(0x84)
+#define S3C64XX_SDHCI_CONTROL4			(0x8C)
+
+#define S3C64XX_SDHCI_CTRL2_ENSTAASYNCCLR	BIT(31)
+#define S3C64XX_SDHCI_CTRL2_ENCMDCNFMSK		BIT(30)
+#define S3C_SDHCI_CTRL2_CDINVRXD3		BIT(29)
+#define S3C_SDHCI_CTRL2_SLCARDOUT		BIT(28)
+
+#define S3C_SDHCI_CTRL2_FLTCLKSEL_MASK		(0xf << 24)
+#define S3C_SDHCI_CTRL2_FLTCLKSEL_SHIFT		(24)
+#define S3C_SDHCI_CTRL2_FLTCLKSEL(_x)		((_x) << 24)
+
+#define S3C_SDHCI_CTRL2_LVLDAT_MASK		(0xff << 16)
+#define S3C_SDHCI_CTRL2_LVLDAT_SHIFT		(16)
+#define S3C_SDHCI_CTRL2_LVLDAT(_x)		((_x) << 16)
+
+#define S3C_SDHCI_CTRL2_ENFBCLKTX		BIT(15)
+#define S3C_SDHCI_CTRL2_ENFBCLKRX		BIT(14)
+#define S3C_SDHCI_CTRL2_SDCDSEL			BIT(13)
+#define S3C_SDHCI_CTRL2_SDSIGPC			BIT(12)
+#define S3C_SDHCI_CTRL2_ENBUSYCHKTXSTART	BIT(11)
+
+#define S3C_SDHCI_CTRL2_DFCNT_MASK		(0x3 << 9)
+#define S3C_SDHCI_CTRL2_DFCNT_SHIFT		(9)
+#define S3C_SDHCI_CTRL2_DFCNT_NONE		(0x0 << 9)
+#define S3C_SDHCI_CTRL2_DFCNT_4SDCLK		(0x1 << 9)
+#define S3C_SDHCI_CTRL2_DFCNT_16SDCLK		(0x2 << 9)
+#define S3C_SDHCI_CTRL2_DFCNT_64SDCLK		(0x3 << 9)
+
+#define S3C_SDHCI_CTRL2_ENCLKOUTHOLD		BIT(8)
+#define S3C_SDHCI_CTRL2_RWAITMODE		BIT(7)
+#define S3C_SDHCI_CTRL2_DISBUFRD		BIT(6)
+
+#define S3C_SDHCI_CTRL2_SELBASECLK_MASK		(0x3 << 4)
+#define S3C_SDHCI_CTRL2_SELBASECLK_SHIFT	(4)
+#define S3C_SDHCI_CTRL2_PWRSYNC			BIT(3)
+#define S3C_SDHCI_CTRL2_ENCLKOUTMSKCON		BIT(1)
+#define S3C_SDHCI_CTRL2_HWINITFIN		BIT(0)
+
+#define S3C_SDHCI_CTRL3_FCSEL3			BIT(31)
+#define S3C_SDHCI_CTRL3_FCSEL2			BIT(23)
+#define S3C_SDHCI_CTRL3_FCSEL1			BIT(15)
+#define S3C_SDHCI_CTRL3_FCSEL0			BIT(7)
+
+#define S3C_SDHCI_CTRL3_FIA3_MASK		(0x7f << 24)
+#define S3C_SDHCI_CTRL3_FIA3_SHIFT		(24)
+#define S3C_SDHCI_CTRL3_FIA3(_x)		((_x) << 24)
+
+#define S3C_SDHCI_CTRL3_FIA2_MASK		(0x7f << 16)
+#define S3C_SDHCI_CTRL3_FIA2_SHIFT		(16)
+#define S3C_SDHCI_CTRL3_FIA2(_x)		((_x) << 16)
+
+#define S3C_SDHCI_CTRL3_FIA1_MASK		(0x7f << 8)
+#define S3C_SDHCI_CTRL3_FIA1_SHIFT		(8)
+#define S3C_SDHCI_CTRL3_FIA1(_x)		((_x) << 8)
+
+#define S3C_SDHCI_CTRL3_FIA0_MASK		(0x7f << 0)
+#define S3C_SDHCI_CTRL3_FIA0_SHIFT		(0)
+#define S3C_SDHCI_CTRL3_FIA0(_x)		((_x) << 0)
+
+#define S3C64XX_SDHCI_CONTROL4_DRIVE_MASK	(0x3 << 16)
+#define S3C64XX_SDHCI_CONTROL4_DRIVE_SHIFT	(16)
+#define S3C64XX_SDHCI_CONTROL4_DRIVE_2mA	(0x0 << 16)
+#define S3C64XX_SDHCI_CONTROL4_DRIVE_4mA	(0x1 << 16)
+#define S3C64XX_SDHCI_CONTROL4_DRIVE_7mA	(0x2 << 16)
+#define S3C64XX_SDHCI_CONTROL4_DRIVE_9mA	(0x3 << 16)
+
+#define S3C64XX_SDHCI_CONTROL4_BUSY		(1)
+
+/**
+ * struct sdhci_s3c - S3C SDHCI instance
+ * @host: The SDHCI host created
+ * @pdev: The platform device we where created from.
+ * @ioarea: The resource created when we claimed the IO area.
+ * @pdata: The platform data for this controller.
+ * @cur_clk: The index of the current bus clock.
+ * @ext_cd_irq: External card detect interrupt.
+ * @clk_io: The clock for the internal bus interface.
+ * @clk_rates: Clock frequencies.
+ * @clk_bus: The clocks that are available for the SD/MMC bus clock.
+ * @no_divider: No or non-standard internal clock divider.
+ */
+struct sdhci_s3c {
+	struct sdhci_host	*host;
+	struct platform_device	*pdev;
+	struct resource		*ioarea;
+	struct s3c_sdhci_platdata *pdata;
+	int			cur_clk;
+	int			ext_cd_irq;
+
+	struct clk		*clk_io;
+	struct clk		*clk_bus[MAX_BUS_CLK];
+	unsigned long		clk_rates[MAX_BUS_CLK];
+
+	bool			no_divider;
+};
+
+/**
+ * struct sdhci_s3c_drv_data - S3C SDHCI platform specific driver data
+ * @sdhci_quirks: sdhci host specific quirks.
+ * @no_divider: no or non-standard internal clock divider.
+ *
+ * Specifies platform specific configuration of sdhci controller.
+ * Note: A structure for driver specific platform data is used for future
+ * expansion of its usage.
+ */
+struct sdhci_s3c_drv_data {
+	unsigned int	sdhci_quirks;
+	bool		no_divider;
+};
+
+static inline struct sdhci_s3c *to_s3c(struct sdhci_host *host)
+{
+	return sdhci_priv(host);
+}
+
+/**
+ * sdhci_s3c_get_max_clk - callback to get maximum clock frequency.
+ * @host: The SDHCI host instance.
+ *
+ * Callback to return the maximum clock rate acheivable by the controller.
+*/
+static unsigned int sdhci_s3c_get_max_clk(struct sdhci_host *host)
+{
+	struct sdhci_s3c *ourhost = to_s3c(host);
+	unsigned long rate, max = 0;
+	int src;
+
+	for (src = 0; src < MAX_BUS_CLK; src++) {
+		rate = ourhost->clk_rates[src];
+		if (rate > max)
+			max = rate;
+	}
+
+	return max;
+}
+
+/**
+ * sdhci_s3c_consider_clock - consider one the bus clocks for current setting
+ * @ourhost: Our SDHCI instance.
+ * @src: The source clock index.
+ * @wanted: The clock frequency wanted.
+ */
+static unsigned int sdhci_s3c_consider_clock(struct sdhci_s3c *ourhost,
+					     unsigned int src,
+					     unsigned int wanted)
+{
+	unsigned long rate;
+	struct clk *clksrc = ourhost->clk_bus[src];
+	int shift;
+
+	if (IS_ERR(clksrc))
+		return UINT_MAX;
+
+	/*
+	 * If controller uses a non-standard clock division, find the best clock
+	 * speed possible with selected clock source and skip the division.
+	 */
+	if (ourhost->no_divider) {
+		rate = clk_round_rate(clksrc, wanted);
+		return wanted - rate;
+	}
+
+	rate = ourhost->clk_rates[src];
+
+	for (shift = 0; shift <= 8; ++shift) {
+		if ((rate >> shift) <= wanted)
+			break;
+	}
+
+	if (shift > 8) {
+		dev_dbg(&ourhost->pdev->dev,
+			"clk %d: rate %ld, min rate %lu > wanted %u\n",
+			src, rate, rate / 256, wanted);
+		return UINT_MAX;
+	}
+
+	dev_dbg(&ourhost->pdev->dev, "clk %d: rate %ld, want %d, got %ld\n",
+		src, rate, wanted, rate >> shift);
+
+	return wanted - (rate >> shift);
+}
+
+/**
+ * sdhci_s3c_set_clock - callback on clock change
+ * @host: The SDHCI host being changed
+ * @clock: The clock rate being requested.
+ *
+ * When the card's clock is going to be changed, look at the new frequency
+ * and find the best clock source to go with it.
+*/
+static void sdhci_s3c_set_clock(struct sdhci_host *host, unsigned int clock)
+{
+	struct sdhci_s3c *ourhost = to_s3c(host);
+	unsigned int best = UINT_MAX;
+	unsigned int delta;
+	int best_src = 0;
+	int src;
+	u32 ctrl;
+
+	host->mmc->actual_clock = 0;
+
+	/* don't bother if the clock is going off. */
+	if (clock == 0) {
+		sdhci_set_clock(host, clock);
+		return;
+	}
+
+	for (src = 0; src < MAX_BUS_CLK; src++) {
+		delta = sdhci_s3c_consider_clock(ourhost, src, clock);
+		if (delta < best) {
+			best = delta;
+			best_src = src;
+		}
+	}
+
+	dev_dbg(&ourhost->pdev->dev,
+		"selected source %d, clock %d, delta %d\n",
+		 best_src, clock, best);
+
+	/* select the new clock source */
+	if (ourhost->cur_clk != best_src) {
+		struct clk *clk = ourhost->clk_bus[best_src];
+
+		clk_prepare_enable(clk);
+		if (ourhost->cur_clk >= 0)
+			clk_disable_unprepare(
+					ourhost->clk_bus[ourhost->cur_clk]);
+
+		ourhost->cur_clk = best_src;
+		host->max_clk = ourhost->clk_rates[best_src];
+	}
+
+	/* turn clock off to card before changing clock source */
+	writew(0, host->ioaddr + SDHCI_CLOCK_CONTROL);
+
+	ctrl = readl(host->ioaddr + S3C_SDHCI_CONTROL2);
+	ctrl &= ~S3C_SDHCI_CTRL2_SELBASECLK_MASK;
+	ctrl |= best_src << S3C_SDHCI_CTRL2_SELBASECLK_SHIFT;
+	writel(ctrl, host->ioaddr + S3C_SDHCI_CONTROL2);
+
+	/* reprogram default hardware configuration */
+	writel(S3C64XX_SDHCI_CONTROL4_DRIVE_9mA,
+		host->ioaddr + S3C64XX_SDHCI_CONTROL4);
+
+	ctrl = readl(host->ioaddr + S3C_SDHCI_CONTROL2);
+	ctrl |= (S3C64XX_SDHCI_CTRL2_ENSTAASYNCCLR |
+		  S3C64XX_SDHCI_CTRL2_ENCMDCNFMSK |
+		  S3C_SDHCI_CTRL2_ENFBCLKRX |
+		  S3C_SDHCI_CTRL2_DFCNT_NONE |
+		  S3C_SDHCI_CTRL2_ENCLKOUTHOLD);
+	writel(ctrl, host->ioaddr + S3C_SDHCI_CONTROL2);
+
+	/* reconfigure the controller for new clock rate */
+	ctrl = (S3C_SDHCI_CTRL3_FCSEL1 | S3C_SDHCI_CTRL3_FCSEL0);
+	if (clock < 25 * 1000000)
+		ctrl |= (S3C_SDHCI_CTRL3_FCSEL3 | S3C_SDHCI_CTRL3_FCSEL2);
+	writel(ctrl, host->ioaddr + S3C_SDHCI_CONTROL3);
+
+	sdhci_set_clock(host, clock);
+}
+
+/**
+ * sdhci_s3c_get_min_clock - callback to get minimal supported clock value
+ * @host: The SDHCI host being queried
+ *
+ * To init mmc host properly a minimal clock value is needed. For high system
+ * bus clock's values the standard formula gives values out of allowed range.
+ * The clock still can be set to lower values, if clock source other then
+ * system bus is selected.
+*/
+static unsigned int sdhci_s3c_get_min_clock(struct sdhci_host *host)
+{
+	struct sdhci_s3c *ourhost = to_s3c(host);
+	unsigned long rate, min = ULONG_MAX;
+	int src;
+
+	for (src = 0; src < MAX_BUS_CLK; src++) {
+		rate = ourhost->clk_rates[src] / 256;
+		if (!rate)
+			continue;
+		if (rate < min)
+			min = rate;
+	}
+
+	return min;
+}
+
+/* sdhci_cmu_get_max_clk - callback to get maximum clock frequency.*/
+static unsigned int sdhci_cmu_get_max_clock(struct sdhci_host *host)
+{
+	struct sdhci_s3c *ourhost = to_s3c(host);
+	unsigned long rate, max = 0;
+	int src;
+
+	for (src = 0; src < MAX_BUS_CLK; src++) {
+		struct clk *clk;
+
+		clk = ourhost->clk_bus[src];
+		if (IS_ERR(clk))
+			continue;
+
+		rate = clk_round_rate(clk, ULONG_MAX);
+		if (rate > max)
+			max = rate;
+	}
+
+	return max;
+}
+
+/* sdhci_cmu_get_min_clock - callback to get minimal supported clock value. */
+static unsigned int sdhci_cmu_get_min_clock(struct sdhci_host *host)
+{
+	struct sdhci_s3c *ourhost = to_s3c(host);
+	unsigned long rate, min = ULONG_MAX;
+	int src;
+
+	for (src = 0; src < MAX_BUS_CLK; src++) {
+		struct clk *clk;
+
+		clk = ourhost->clk_bus[src];
+		if (IS_ERR(clk))
+			continue;
+
+		rate = clk_round_rate(clk, 0);
+		if (rate < min)
+			min = rate;
+	}
+
+	return min;
+}
+
+/* sdhci_cmu_set_clock - callback on clock change.*/
+static void sdhci_cmu_set_clock(struct sdhci_host *host, unsigned int clock)
+{
+	struct sdhci_s3c *ourhost = to_s3c(host);
+	struct device *dev = &ourhost->pdev->dev;
+	unsigned long timeout;
+	u16 clk = 0;
+	int ret;
+
+	host->mmc->actual_clock = 0;
+
+	/* If the clock is going off, set to 0 at clock control register */
+	if (clock == 0) {
+		sdhci_writew(host, 0, SDHCI_CLOCK_CONTROL);
+		return;
+	}
+
+	sdhci_s3c_set_clock(host, clock);
+
+	/* Reset SD Clock Enable */
+	clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL);
+	clk &= ~SDHCI_CLOCK_CARD_EN;
+	sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
+
+	ret = clk_set_rate(ourhost->clk_bus[ourhost->cur_clk], clock);
+	if (ret != 0) {
+		dev_err(dev, "%s: failed to set clock rate %uHz\n",
+			mmc_hostname(host->mmc), clock);
+		return;
+	}
+
+	clk = SDHCI_CLOCK_INT_EN;
+	sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
+
+	/* Wait max 20 ms */
+	timeout = 20;
+	while (!((clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL))
+		& SDHCI_CLOCK_INT_STABLE)) {
+		if (timeout == 0) {
+			dev_err(dev, "%s: Internal clock never stabilised.\n",
+				mmc_hostname(host->mmc));
+			return;
+		}
+		timeout--;
+		mdelay(1);
+	}
+
+	clk |= SDHCI_CLOCK_CARD_EN;
+	sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
+}
+
+static struct sdhci_ops sdhci_s3c_ops = {
+	.get_max_clock		= sdhci_s3c_get_max_clk,
+	.set_clock		= sdhci_s3c_set_clock,
+	.get_min_clock		= sdhci_s3c_get_min_clock,
+	.set_bus_width		= sdhci_set_bus_width,
+	.reset			= sdhci_reset,
+	.set_uhs_signaling	= sdhci_set_uhs_signaling,
+};
+
+#ifdef CONFIG_OF
+static int sdhci_s3c_parse_dt(struct device *dev,
+		struct sdhci_host *host, struct s3c_sdhci_platdata *pdata)
+{
+	struct device_node *node = dev->of_node;
+	u32 max_width;
+
+	/* if the bus-width property is not specified, assume width as 1 */
+	if (of_property_read_u32(node, "bus-width", &max_width))
+		max_width = 1;
+	pdata->max_width = max_width;
+
+	/* get the card detection method */
+	if (of_property_read_bool(node, "broken-cd")) {
+		pdata->cd_type = S3C_SDHCI_CD_NONE;
+		return 0;
+	}
+
+	if (of_property_read_bool(node, "non-removable")) {
+		pdata->cd_type = S3C_SDHCI_CD_PERMANENT;
+		return 0;
+	}
+
+	if (of_get_named_gpio(node, "cd-gpios", 0))
+		return 0;
+
+	/* assuming internal card detect that will be configured by pinctrl */
+	pdata->cd_type = S3C_SDHCI_CD_INTERNAL;
+	return 0;
+}
+#else
+static int sdhci_s3c_parse_dt(struct device *dev,
+		struct sdhci_host *host, struct s3c_sdhci_platdata *pdata)
+{
+	return -EINVAL;
+}
+#endif
+
+static inline const struct sdhci_s3c_drv_data *sdhci_s3c_get_driver_data(
+			struct platform_device *pdev)
+{
+#ifdef CONFIG_OF
+	if (pdev->dev.of_node)
+		return of_device_get_match_data(&pdev->dev);
+#endif
+	return (const struct sdhci_s3c_drv_data *)
+			platform_get_device_id(pdev)->driver_data;
+}
+
+static int sdhci_s3c_probe(struct platform_device *pdev)
+{
+	struct s3c_sdhci_platdata *pdata;
+	const struct sdhci_s3c_drv_data *drv_data;
+	struct device *dev = &pdev->dev;
+	struct sdhci_host *host;
+	struct sdhci_s3c *sc;
+	int ret, irq, ptr, clks;
+
+	if (!pdev->dev.platform_data && !pdev->dev.of_node) {
+		dev_err(dev, "no device data specified\n");
+		return -ENOENT;
+	}
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0)
+		return irq;
+
+	host = sdhci_alloc_host(dev, sizeof(struct sdhci_s3c));
+	if (IS_ERR(host)) {
+		dev_err(dev, "sdhci_alloc_host() failed\n");
+		return PTR_ERR(host);
+	}
+	sc = sdhci_priv(host);
+
+	pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
+	if (!pdata) {
+		ret = -ENOMEM;
+		goto err_pdata_io_clk;
+	}
+
+	if (pdev->dev.of_node) {
+		ret = sdhci_s3c_parse_dt(&pdev->dev, host, pdata);
+		if (ret)
+			goto err_pdata_io_clk;
+	} else {
+		memcpy(pdata, pdev->dev.platform_data, sizeof(*pdata));
+	}
+
+	drv_data = sdhci_s3c_get_driver_data(pdev);
+
+	sc->host = host;
+	sc->pdev = pdev;
+	sc->pdata = pdata;
+	sc->cur_clk = -1;
+
+	platform_set_drvdata(pdev, host);
+
+	sc->clk_io = devm_clk_get(dev, "hsmmc");
+	if (IS_ERR(sc->clk_io)) {
+		dev_err(dev, "failed to get io clock\n");
+		ret = PTR_ERR(sc->clk_io);
+		goto err_pdata_io_clk;
+	}
+
+	/* enable the local io clock and keep it running for the moment. */
+	clk_prepare_enable(sc->clk_io);
+
+	for (clks = 0, ptr = 0; ptr < MAX_BUS_CLK; ptr++) {
+		char name[14];
+
+		snprintf(name, 14, "mmc_busclk.%d", ptr);
+		sc->clk_bus[ptr] = devm_clk_get(dev, name);
+		if (IS_ERR(sc->clk_bus[ptr]))
+			continue;
+
+		clks++;
+		sc->clk_rates[ptr] = clk_get_rate(sc->clk_bus[ptr]);
+
+		dev_info(dev, "clock source %d: %s (%ld Hz)\n",
+				ptr, name, sc->clk_rates[ptr]);
+	}
+
+	if (clks == 0) {
+		dev_err(dev, "failed to find any bus clocks\n");
+		ret = -ENOENT;
+		goto err_no_busclks;
+	}
+
+	host->ioaddr = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(host->ioaddr)) {
+		ret = PTR_ERR(host->ioaddr);
+		goto err_req_regs;
+	}
+
+	/* Ensure we have minimal gpio selected CMD/CLK/Detect */
+	if (pdata->cfg_gpio)
+		pdata->cfg_gpio(pdev, pdata->max_width);
+
+	host->hw_name = "samsung-hsmmc";
+	host->ops = &sdhci_s3c_ops;
+	host->quirks = 0;
+	host->quirks2 = 0;
+	host->irq = irq;
+
+	/* Setup quirks for the controller */
+	host->quirks |= SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC;
+	host->quirks |= SDHCI_QUIRK_NO_HISPD_BIT;
+	if (drv_data) {
+		host->quirks |= drv_data->sdhci_quirks;
+		sc->no_divider = drv_data->no_divider;
+	}
+
+#ifndef CONFIG_MMC_SDHCI_S3C_DMA
+
+	/* we currently see overruns on errors, so disable the SDMA
+	 * support as well. */
+	host->quirks |= SDHCI_QUIRK_BROKEN_DMA;
+
+#endif /* CONFIG_MMC_SDHCI_S3C_DMA */
+
+	/* It seems we do not get an DATA transfer complete on non-busy
+	 * transfers, not sure if this is a problem with this specific
+	 * SDHCI block, or a missing configuration that needs to be set. */
+	host->quirks |= SDHCI_QUIRK_NO_BUSY_IRQ;
+
+	/* This host supports the Auto CMD12 */
+	host->quirks |= SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12;
+
+	/* Samsung SoCs need BROKEN_ADMA_ZEROLEN_DESC */
+	host->quirks |= SDHCI_QUIRK_BROKEN_ADMA_ZEROLEN_DESC;
+
+	if (pdata->cd_type == S3C_SDHCI_CD_NONE ||
+	    pdata->cd_type == S3C_SDHCI_CD_PERMANENT)
+		host->quirks |= SDHCI_QUIRK_BROKEN_CARD_DETECTION;
+
+	if (pdata->cd_type == S3C_SDHCI_CD_PERMANENT)
+		host->mmc->caps = MMC_CAP_NONREMOVABLE;
+
+	switch (pdata->max_width) {
+	case 8:
+		host->mmc->caps |= MMC_CAP_8_BIT_DATA;
+		fallthrough;
+	case 4:
+		host->mmc->caps |= MMC_CAP_4_BIT_DATA;
+		break;
+	}
+
+	if (pdata->pm_caps)
+		host->mmc->pm_caps |= pdata->pm_caps;
+
+	host->quirks |= (SDHCI_QUIRK_32BIT_DMA_ADDR |
+			 SDHCI_QUIRK_32BIT_DMA_SIZE);
+
+	/* HSMMC on Samsung SoCs uses SDCLK as timeout clock */
+	host->quirks |= SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK;
+
+	/*
+	 * If controller does not have internal clock divider,
+	 * we can use overriding functions instead of default.
+	 */
+	if (sc->no_divider) {
+		sdhci_s3c_ops.set_clock = sdhci_cmu_set_clock;
+		sdhci_s3c_ops.get_min_clock = sdhci_cmu_get_min_clock;
+		sdhci_s3c_ops.get_max_clock = sdhci_cmu_get_max_clock;
+	}
+
+	/* It supports additional host capabilities if needed */
+	if (pdata->host_caps)
+		host->mmc->caps |= pdata->host_caps;
+
+	if (pdata->host_caps2)
+		host->mmc->caps2 |= pdata->host_caps2;
+
+	pm_runtime_enable(&pdev->dev);
+	pm_runtime_set_autosuspend_delay(&pdev->dev, 50);
+	pm_runtime_use_autosuspend(&pdev->dev);
+	pm_suspend_ignore_children(&pdev->dev, 1);
+
+	ret = mmc_of_parse(host->mmc);
+	if (ret)
+		goto err_req_regs;
+
+	ret = sdhci_add_host(host);
+	if (ret)
+		goto err_req_regs;
+
+#ifdef CONFIG_PM
+	if (pdata->cd_type != S3C_SDHCI_CD_INTERNAL)
+		clk_disable_unprepare(sc->clk_io);
+#endif
+	return 0;
+
+ err_req_regs:
+	pm_runtime_disable(&pdev->dev);
+
+ err_no_busclks:
+	clk_disable_unprepare(sc->clk_io);
+
+ err_pdata_io_clk:
+	sdhci_free_host(host);
+
+	return ret;
+}
+
+static void sdhci_s3c_remove(struct platform_device *pdev)
+{
+	struct sdhci_host *host =  platform_get_drvdata(pdev);
+	struct sdhci_s3c *sc = sdhci_priv(host);
+
+	if (sc->ext_cd_irq)
+		free_irq(sc->ext_cd_irq, sc);
+
+#ifdef CONFIG_PM
+	if (sc->pdata->cd_type != S3C_SDHCI_CD_INTERNAL)
+		clk_prepare_enable(sc->clk_io);
+#endif
+	sdhci_remove_host(host, 1);
+
+	pm_runtime_dont_use_autosuspend(&pdev->dev);
+	pm_runtime_disable(&pdev->dev);
+
+	clk_disable_unprepare(sc->clk_io);
+
+	sdhci_free_host(host);
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int sdhci_s3c_suspend(struct device *dev)
+{
+	struct sdhci_host *host = dev_get_drvdata(dev);
+
+	if (host->tuning_mode != SDHCI_TUNING_MODE_3)
+		mmc_retune_needed(host->mmc);
+
+	return sdhci_suspend_host(host);
+}
+
+static int sdhci_s3c_resume(struct device *dev)
+{
+	struct sdhci_host *host = dev_get_drvdata(dev);
+
+	return sdhci_resume_host(host);
+}
+#endif
+
+#ifdef CONFIG_PM
+static int sdhci_s3c_runtime_suspend(struct device *dev)
+{
+	struct sdhci_host *host = dev_get_drvdata(dev);
+	struct sdhci_s3c *ourhost = to_s3c(host);
+	struct clk *busclk = ourhost->clk_io;
+	int ret;
+
+	ret = sdhci_runtime_suspend_host(host);
+
+	if (host->tuning_mode != SDHCI_TUNING_MODE_3)
+		mmc_retune_needed(host->mmc);
+
+	if (ourhost->cur_clk >= 0)
+		clk_disable_unprepare(ourhost->clk_bus[ourhost->cur_clk]);
+	clk_disable_unprepare(busclk);
+	return ret;
+}
+
+static int sdhci_s3c_runtime_resume(struct device *dev)
+{
+	struct sdhci_host *host = dev_get_drvdata(dev);
+	struct sdhci_s3c *ourhost = to_s3c(host);
+	struct clk *busclk = ourhost->clk_io;
+	int ret;
+
+	clk_prepare_enable(busclk);
+	if (ourhost->cur_clk >= 0)
+		clk_prepare_enable(ourhost->clk_bus[ourhost->cur_clk]);
+	ret = sdhci_runtime_resume_host(host, 0);
+	return ret;
+}
+#endif
+
+static const struct dev_pm_ops sdhci_s3c_pmops = {
+	SET_SYSTEM_SLEEP_PM_OPS(sdhci_s3c_suspend, sdhci_s3c_resume)
+	SET_RUNTIME_PM_OPS(sdhci_s3c_runtime_suspend, sdhci_s3c_runtime_resume,
+			   NULL)
+};
+
+static const struct platform_device_id sdhci_s3c_driver_ids[] = {
+	{
+		.name		= "s3c-sdhci",
+		.driver_data	= (kernel_ulong_t)NULL,
+	},
+	{ }
+};
+MODULE_DEVICE_TABLE(platform, sdhci_s3c_driver_ids);
+
+#ifdef CONFIG_OF
+static const struct sdhci_s3c_drv_data exynos4_sdhci_drv_data = {
+	.no_divider = true,
+};
+
+static const struct of_device_id sdhci_s3c_dt_match[] = {
+	{ .compatible = "samsung,s3c6410-sdhci", },
+	{ .compatible = "samsung,exynos4210-sdhci",
+		.data = &exynos4_sdhci_drv_data },
+	{},
+};
+MODULE_DEVICE_TABLE(of, sdhci_s3c_dt_match);
+#endif
+
+static struct platform_driver sdhci_s3c_driver = {
+	.probe		= sdhci_s3c_probe,
+	.remove_new	= sdhci_s3c_remove,
+	.id_table	= sdhci_s3c_driver_ids,
+	.driver		= {
+		.name	= "s3c-sdhci",
+		.probe_type = PROBE_PREFER_ASYNCHRONOUS,
+		.of_match_table = of_match_ptr(sdhci_s3c_dt_match),
+		.pm	= &sdhci_s3c_pmops,
+	},
+};
+
+module_platform_driver(sdhci_s3c_driver);
+
+MODULE_DESCRIPTION("Samsung SDHCI (HSMMC) glue");
+MODULE_AUTHOR("Ben Dooks, <ben@simtec.co.uk>");
+MODULE_LICENSE("GPL v2");