summaryrefslogtreecommitdiffstats
path: root/drivers/mtd/chips/Kconfig
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/mtd/chips/Kconfig')
-rw-r--r--drivers/mtd/chips/Kconfig243
1 files changed, 243 insertions, 0 deletions
diff --git a/drivers/mtd/chips/Kconfig b/drivers/mtd/chips/Kconfig
new file mode 100644
index 000000000..19726ebd9
--- /dev/null
+++ b/drivers/mtd/chips/Kconfig
@@ -0,0 +1,243 @@
+# SPDX-License-Identifier: GPL-2.0-only
+menu "RAM/ROM/Flash chip drivers"
+ depends on MTD!=n
+
+config MTD_CFI
+ tristate "Detect flash chips by Common Flash Interface (CFI) probe"
+ select MTD_GEN_PROBE
+ select MTD_CFI_UTIL
+ help
+ The Common Flash Interface specification was developed by Intel,
+ AMD and other flash manufactures that provides a universal method
+ for probing the capabilities of flash devices. If you wish to
+ support any device that is CFI-compliant, you need to enable this
+ option. Visit <https://www.amd.com/products/nvd/overview/cfi.html>
+ for more information on CFI.
+
+config MTD_JEDECPROBE
+ tristate "Detect non-CFI AMD/JEDEC-compatible flash chips"
+ select MTD_GEN_PROBE
+ select MTD_CFI_UTIL
+ help
+ This option enables JEDEC-style probing of flash chips which are not
+ compatible with the Common Flash Interface, but will use the common
+ CFI-targeted flash drivers for any chips which are identified which
+ are in fact compatible in all but the probe method. This actually
+ covers most AMD/Fujitsu-compatible chips and also non-CFI
+ Intel chips.
+
+config MTD_GEN_PROBE
+ tristate
+
+config MTD_CFI_ADV_OPTIONS
+ bool "Flash chip driver advanced configuration options"
+ depends on MTD_GEN_PROBE
+ help
+ If you need to specify a specific endianness for access to flash
+ chips, or if you wish to reduce the size of the kernel by including
+ support for only specific arrangements of flash chips, say 'Y'. This
+ option does not directly affect the code, but will enable other
+ configuration options which allow you to do so.
+
+ If unsure, say 'N'.
+
+choice
+ prompt "Flash cmd/query data swapping"
+ depends on MTD_CFI_ADV_OPTIONS
+ default MTD_CFI_NOSWAP
+ help
+ This option defines the way in which the CPU attempts to arrange
+ data bits when writing the 'magic' commands to the chips. Saying
+ 'NO', which is the default when CONFIG_MTD_CFI_ADV_OPTIONS isn't
+ enabled, means that the CPU will not do any swapping; the chips
+ are expected to be wired to the CPU in 'host-endian' form.
+ Specific arrangements are possible with the BIG_ENDIAN_BYTE and
+ LITTLE_ENDIAN_BYTE, if the bytes are reversed.
+
+config MTD_CFI_NOSWAP
+ depends on !ARCH_IXP4XX || CPU_BIG_ENDIAN
+ bool "NO"
+
+config MTD_CFI_BE_BYTE_SWAP
+ bool "BIG_ENDIAN_BYTE"
+
+config MTD_CFI_LE_BYTE_SWAP
+ depends on !ARCH_IXP4XX
+ bool "LITTLE_ENDIAN_BYTE"
+
+endchoice
+
+config MTD_CFI_GEOMETRY
+ bool "Specific CFI Flash geometry selection"
+ depends on MTD_CFI_ADV_OPTIONS
+ select MTD_MAP_BANK_WIDTH_1 if !(MTD_MAP_BANK_WIDTH_2 || \
+ MTD_MAP_BANK_WIDTH_4 || MTD_MAP_BANK_WIDTH_8 || \
+ MTD_MAP_BANK_WIDTH_16 || MTD_MAP_BANK_WIDTH_32)
+ select MTD_CFI_I1 if !(MTD_CFI_I2 || MTD_CFI_I4 || MTD_CFI_I8)
+ help
+ This option does not affect the code directly, but will enable
+ some other configuration options which would allow you to reduce
+ the size of the kernel by including support for only certain
+ arrangements of CFI chips. If unsure, say 'N' and all options
+ which are supported by the current code will be enabled.
+
+config MTD_MAP_BANK_WIDTH_1
+ bool "Support 8-bit buswidth" if MTD_CFI_GEOMETRY
+ default y
+ help
+ If you wish to support CFI devices on a physical bus which is
+ 8 bits wide, say 'Y'.
+
+config MTD_MAP_BANK_WIDTH_2
+ bool "Support 16-bit buswidth" if MTD_CFI_GEOMETRY
+ default y
+ help
+ If you wish to support CFI devices on a physical bus which is
+ 16 bits wide, say 'Y'.
+
+config MTD_MAP_BANK_WIDTH_4
+ bool "Support 32-bit buswidth" if MTD_CFI_GEOMETRY
+ default y
+ help
+ If you wish to support CFI devices on a physical bus which is
+ 32 bits wide, say 'Y'.
+
+config MTD_MAP_BANK_WIDTH_8
+ bool "Support 64-bit buswidth" if MTD_CFI_GEOMETRY
+ default n
+ help
+ If you wish to support CFI devices on a physical bus which is
+ 64 bits wide, say 'Y'.
+
+config MTD_MAP_BANK_WIDTH_16
+ bool "Support 128-bit buswidth" if MTD_CFI_GEOMETRY
+ default n
+ help
+ If you wish to support CFI devices on a physical bus which is
+ 128 bits wide, say 'Y'.
+
+config MTD_MAP_BANK_WIDTH_32
+ bool "Support 256-bit buswidth" if MTD_CFI_GEOMETRY
+ select MTD_COMPLEX_MAPPINGS if HAS_IOMEM
+ default n
+ help
+ If you wish to support CFI devices on a physical bus which is
+ 256 bits wide, say 'Y'.
+
+config MTD_CFI_I1
+ bool "Support 1-chip flash interleave" if MTD_CFI_GEOMETRY
+ default y
+ help
+ If your flash chips are not interleaved - i.e. you only have one
+ flash chip addressed by each bus cycle, then say 'Y'.
+
+config MTD_CFI_I2
+ bool "Support 2-chip flash interleave" if MTD_CFI_GEOMETRY
+ default y
+ help
+ If your flash chips are interleaved in pairs - i.e. you have two
+ flash chips addressed by each bus cycle, then say 'Y'.
+
+config MTD_CFI_I4
+ bool "Support 4-chip flash interleave" if MTD_CFI_GEOMETRY
+ default n
+ help
+ If your flash chips are interleaved in fours - i.e. you have four
+ flash chips addressed by each bus cycle, then say 'Y'.
+
+config MTD_CFI_I8
+ bool "Support 8-chip flash interleave" if MTD_CFI_GEOMETRY
+ default n
+ help
+ If your flash chips are interleaved in eights - i.e. you have eight
+ flash chips addressed by each bus cycle, then say 'Y'.
+
+config MTD_OTP
+ bool "Protection Registers aka one-time programmable (OTP) bits"
+ depends on MTD_CFI_ADV_OPTIONS
+ default n
+ help
+ This enables support for reading, writing and locking so called
+ "Protection Registers" present on some flash chips.
+ A subset of them are pre-programmed at the factory with a
+ unique set of values. The rest is user-programmable.
+
+ The user-programmable Protection Registers contain one-time
+ programmable (OTP) bits; when programmed, register bits cannot be
+ erased. Each Protection Register can be accessed multiple times to
+ program individual bits, as long as the register remains unlocked.
+
+ Each Protection Register has an associated Lock Register bit. When a
+ Lock Register bit is programmed, the associated Protection Register
+ can only be read; it can no longer be programmed. Additionally,
+ because the Lock Register bits themselves are OTP, when programmed,
+ Lock Register bits cannot be erased. Therefore, when a Protection
+ Register is locked, it cannot be unlocked.
+
+ This feature should therefore be used with extreme care. Any mistake
+ in the programming of OTP bits will waste them.
+
+config MTD_CFI_INTELEXT
+ tristate "Support for CFI command set 0001 (Intel/Sharp chips)"
+ depends on MTD_GEN_PROBE
+ select MTD_CFI_UTIL
+ help
+ The Common Flash Interface defines a number of different command
+ sets which a CFI-compliant chip may claim to implement. This code
+ provides support for command set 0001, used on Intel StrataFlash
+ and other parts.
+
+config MTD_CFI_AMDSTD
+ tristate "Support for CFI command set 0002 (AMD/Fujitsu/Spansion chips)"
+ depends on MTD_GEN_PROBE
+ select MTD_CFI_UTIL
+ help
+ The Common Flash Interface defines a number of different command
+ sets which a CFI-compliant chip may claim to implement. This code
+ provides support for command set 0002, used on chips including
+ the AMD Am29LV320.
+
+config MTD_CFI_STAA
+ tristate "Support for CFI command set 0020 (ST (Advanced Architecture) chips)"
+ depends on MTD_GEN_PROBE
+ select MTD_CFI_UTIL
+ help
+ The Common Flash Interface defines a number of different command
+ sets which a CFI-compliant chip may claim to implement. This code
+ provides support for command set 0020.
+
+config MTD_CFI_UTIL
+ tristate
+
+config MTD_RAM
+ tristate "Support for RAM chips in bus mapping"
+ help
+ This option enables basic support for RAM chips accessed through
+ a bus mapping driver.
+
+config MTD_ROM
+ tristate "Support for ROM chips in bus mapping"
+ help
+ This option enables basic support for ROM chips accessed through
+ a bus mapping driver.
+
+config MTD_ABSENT
+ tristate "Support for absent chips in bus mapping"
+ help
+ This option enables support for a dummy probing driver used to
+ allocated placeholder MTD devices on systems that have socketed
+ or removable media. Use of this driver as a fallback chip probe
+ preserves the expected registration order of MTD device nodes on
+ the system regardless of media presence. Device nodes created
+ with this driver will return -ENODEV upon access.
+
+config MTD_XIP
+ bool "XIP aware MTD support"
+ depends on !SMP && (MTD_CFI_INTELEXT || MTD_CFI_AMDSTD) && ARCH_MTD_XIP
+ default y if XIP_KERNEL
+ help
+ This allows MTD support to work with flash memory which is also
+ used for XIP purposes. If you're not sure what this is all about
+ then say N.
+
+endmenu