summaryrefslogtreecommitdiffstats
path: root/drivers/mtd/maps/sc520cdp.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/mtd/maps/sc520cdp.c')
-rw-r--r--drivers/mtd/maps/sc520cdp.c294
1 files changed, 294 insertions, 0 deletions
diff --git a/drivers/mtd/maps/sc520cdp.c b/drivers/mtd/maps/sc520cdp.c
new file mode 100644
index 000000000..8ef7aec63
--- /dev/null
+++ b/drivers/mtd/maps/sc520cdp.c
@@ -0,0 +1,294 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/* sc520cdp.c -- MTD map driver for AMD SC520 Customer Development Platform
+ *
+ * Copyright (C) 2001 Sysgo Real-Time Solutions GmbH
+ *
+ * The SC520CDP is an evaluation board for the Elan SC520 processor available
+ * from AMD. It has two banks of 32-bit Flash ROM, each 8 Megabytes in size,
+ * and up to 512 KiB of 8-bit DIL Flash ROM.
+ * For details see https://www.amd.com/products/epd/desiging/evalboards/18.elansc520/520_cdp_brief/index.html
+ */
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <asm/io.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/concat.h>
+
+/*
+** The Embedded Systems BIOS decodes the first FLASH starting at
+** 0x8400000. This is a *terrible* place for it because accessing
+** the flash at this location causes the A22 address line to be high
+** (that's what 0x8400000 binary's ought to be). But this is the highest
+** order address line on the raw flash devices themselves!!
+** This causes the top HALF of the flash to be accessed first. Beyond
+** the physical limits of the flash, the flash chip aliases over (to
+** 0x880000 which causes the bottom half to be accessed. This splits the
+** flash into two and inverts it! If you then try to access this from another
+** program that does NOT do this insanity, then you *will* access the
+** first half of the flash, but not find what you expect there. That
+** stuff is in the *second* half! Similarly, the address used by the
+** BIOS for the second FLASH bank is also quite a bad choice.
+** If REPROGRAM_PAR is defined below (the default), then this driver will
+** choose more useful addresses for the FLASH banks by reprogramming the
+** responsible PARxx registers in the SC520's MMCR region. This will
+** cause the settings to be incompatible with the BIOS's settings, which
+** shouldn't be a problem since you are running Linux, (i.e. the BIOS is
+** not much use anyway). However, if you need to be compatible with
+** the BIOS for some reason, just undefine REPROGRAM_PAR.
+*/
+#define REPROGRAM_PAR
+
+
+
+#ifdef REPROGRAM_PAR
+
+/* These are the addresses we want.. */
+#define WINDOW_ADDR_0 0x08800000
+#define WINDOW_ADDR_1 0x09000000
+#define WINDOW_ADDR_2 0x09800000
+
+/* .. and these are the addresses the BIOS gives us */
+#define WINDOW_ADDR_0_BIOS 0x08400000
+#define WINDOW_ADDR_1_BIOS 0x08c00000
+#define WINDOW_ADDR_2_BIOS 0x09400000
+
+#else
+
+#define WINDOW_ADDR_0 0x08400000
+#define WINDOW_ADDR_1 0x08C00000
+#define WINDOW_ADDR_2 0x09400000
+
+#endif
+
+#define WINDOW_SIZE_0 0x00800000
+#define WINDOW_SIZE_1 0x00800000
+#define WINDOW_SIZE_2 0x00080000
+
+
+static struct map_info sc520cdp_map[] = {
+ {
+ .name = "SC520CDP Flash Bank #0",
+ .size = WINDOW_SIZE_0,
+ .bankwidth = 4,
+ .phys = WINDOW_ADDR_0
+ },
+ {
+ .name = "SC520CDP Flash Bank #1",
+ .size = WINDOW_SIZE_1,
+ .bankwidth = 4,
+ .phys = WINDOW_ADDR_1
+ },
+ {
+ .name = "SC520CDP DIL Flash",
+ .size = WINDOW_SIZE_2,
+ .bankwidth = 1,
+ .phys = WINDOW_ADDR_2
+ },
+};
+
+#define NUM_FLASH_BANKS ARRAY_SIZE(sc520cdp_map)
+
+static struct mtd_info *mymtd[NUM_FLASH_BANKS];
+static struct mtd_info *merged_mtd;
+
+#ifdef REPROGRAM_PAR
+
+/*
+** The SC520 MMCR (memory mapped control register) region resides
+** at 0xFFFEF000. The 16 Programmable Address Region (PAR) registers
+** are at offset 0x88 in the MMCR:
+*/
+#define SC520_MMCR_BASE 0xFFFEF000
+#define SC520_MMCR_EXTENT 0x1000
+#define SC520_PAR(x) ((0x88/sizeof(unsigned long)) + (x))
+#define NUM_SC520_PAR 16 /* total number of PAR registers */
+
+/*
+** The highest three bits in a PAR register determine what target
+** device is controlled by this PAR. Here, only ROMCS? and BOOTCS
+** devices are of interest.
+*/
+#define SC520_PAR_BOOTCS (0x4<<29)
+#define SC520_PAR_ROMCS0 (0x5<<29)
+#define SC520_PAR_ROMCS1 (0x6<<29)
+#define SC520_PAR_TRGDEV (0x7<<29)
+
+/*
+** Bits 28 thru 26 determine some attributes for the
+** region controlled by the PAR. (We only use non-cacheable)
+*/
+#define SC520_PAR_WRPROT (1<<26) /* write protected */
+#define SC520_PAR_NOCACHE (1<<27) /* non-cacheable */
+#define SC520_PAR_NOEXEC (1<<28) /* code execution denied */
+
+
+/*
+** Bit 25 determines the granularity: 4K or 64K
+*/
+#define SC520_PAR_PG_SIZ4 (0<<25)
+#define SC520_PAR_PG_SIZ64 (1<<25)
+
+/*
+** Build a value to be written into a PAR register.
+** We only need ROM entries, 64K page size:
+*/
+#define SC520_PAR_ENTRY(trgdev, address, size) \
+ ((trgdev) | SC520_PAR_NOCACHE | SC520_PAR_PG_SIZ64 | \
+ (address) >> 16 | (((size) >> 16) - 1) << 14)
+
+struct sc520_par_table
+{
+ unsigned long trgdev;
+ unsigned long new_par;
+ unsigned long default_address;
+};
+
+static const struct sc520_par_table par_table[NUM_FLASH_BANKS] =
+{
+ { /* Flash Bank #0: selected by ROMCS0 */
+ SC520_PAR_ROMCS0,
+ SC520_PAR_ENTRY(SC520_PAR_ROMCS0, WINDOW_ADDR_0, WINDOW_SIZE_0),
+ WINDOW_ADDR_0_BIOS
+ },
+ { /* Flash Bank #1: selected by ROMCS1 */
+ SC520_PAR_ROMCS1,
+ SC520_PAR_ENTRY(SC520_PAR_ROMCS1, WINDOW_ADDR_1, WINDOW_SIZE_1),
+ WINDOW_ADDR_1_BIOS
+ },
+ { /* DIL (BIOS) Flash: selected by BOOTCS */
+ SC520_PAR_BOOTCS,
+ SC520_PAR_ENTRY(SC520_PAR_BOOTCS, WINDOW_ADDR_2, WINDOW_SIZE_2),
+ WINDOW_ADDR_2_BIOS
+ }
+};
+
+
+static void sc520cdp_setup_par(void)
+{
+ unsigned long __iomem *mmcr;
+ unsigned long mmcr_val;
+ int i, j;
+
+ /* map in SC520's MMCR area */
+ mmcr = ioremap(SC520_MMCR_BASE, SC520_MMCR_EXTENT);
+ if(!mmcr) { /* ioremap failed: skip the PAR reprogramming */
+ /* force physical address fields to BIOS defaults: */
+ for(i = 0; i < NUM_FLASH_BANKS; i++)
+ sc520cdp_map[i].phys = par_table[i].default_address;
+ return;
+ }
+
+ /*
+ ** Find the PARxx registers that are responsible for activating
+ ** ROMCS0, ROMCS1 and BOOTCS. Reprogram each of these with a
+ ** new value from the table.
+ */
+ for(i = 0; i < NUM_FLASH_BANKS; i++) { /* for each par_table entry */
+ for(j = 0; j < NUM_SC520_PAR; j++) { /* for each PAR register */
+ mmcr_val = readl(&mmcr[SC520_PAR(j)]);
+ /* if target device field matches, reprogram the PAR */
+ if((mmcr_val & SC520_PAR_TRGDEV) == par_table[i].trgdev)
+ {
+ writel(par_table[i].new_par, &mmcr[SC520_PAR(j)]);
+ break;
+ }
+ }
+ if(j == NUM_SC520_PAR)
+ { /* no matching PAR found: try default BIOS address */
+ printk(KERN_NOTICE "Could not find PAR responsible for %s\n",
+ sc520cdp_map[i].name);
+ printk(KERN_NOTICE "Trying default address 0x%lx\n",
+ par_table[i].default_address);
+ sc520cdp_map[i].phys = par_table[i].default_address;
+ }
+ }
+ iounmap(mmcr);
+}
+#endif
+
+
+static int __init init_sc520cdp(void)
+{
+ int i, j, devices_found = 0;
+
+#ifdef REPROGRAM_PAR
+ /* reprogram PAR registers so flash appears at the desired addresses */
+ sc520cdp_setup_par();
+#endif
+
+ for (i = 0; i < NUM_FLASH_BANKS; i++) {
+ printk(KERN_NOTICE "SC520 CDP flash device: 0x%Lx at 0x%Lx\n",
+ (unsigned long long)sc520cdp_map[i].size,
+ (unsigned long long)sc520cdp_map[i].phys);
+
+ sc520cdp_map[i].virt = ioremap(sc520cdp_map[i].phys, sc520cdp_map[i].size);
+
+ if (!sc520cdp_map[i].virt) {
+ printk("Failed to ioremap\n");
+ for (j = 0; j < i; j++) {
+ if (mymtd[j]) {
+ map_destroy(mymtd[j]);
+ iounmap(sc520cdp_map[j].virt);
+ }
+ }
+ return -EIO;
+ }
+
+ simple_map_init(&sc520cdp_map[i]);
+
+ mymtd[i] = do_map_probe("cfi_probe", &sc520cdp_map[i]);
+ if(!mymtd[i])
+ mymtd[i] = do_map_probe("jedec_probe", &sc520cdp_map[i]);
+ if(!mymtd[i])
+ mymtd[i] = do_map_probe("map_rom", &sc520cdp_map[i]);
+
+ if (mymtd[i]) {
+ mymtd[i]->owner = THIS_MODULE;
+ ++devices_found;
+ }
+ else {
+ iounmap(sc520cdp_map[i].virt);
+ }
+ }
+ if(devices_found >= 2) {
+ /* Combine the two flash banks into a single MTD device & register it: */
+ merged_mtd = mtd_concat_create(mymtd, 2, "SC520CDP Flash Banks #0 and #1");
+ if(merged_mtd)
+ mtd_device_register(merged_mtd, NULL, 0);
+ }
+ if(devices_found == 3) /* register the third (DIL-Flash) device */
+ mtd_device_register(mymtd[2], NULL, 0);
+ return(devices_found ? 0 : -ENXIO);
+}
+
+static void __exit cleanup_sc520cdp(void)
+{
+ int i;
+
+ if (merged_mtd) {
+ mtd_device_unregister(merged_mtd);
+ mtd_concat_destroy(merged_mtd);
+ }
+ if (mymtd[2])
+ mtd_device_unregister(mymtd[2]);
+
+ for (i = 0; i < NUM_FLASH_BANKS; i++) {
+ if (mymtd[i])
+ map_destroy(mymtd[i]);
+ if (sc520cdp_map[i].virt) {
+ iounmap(sc520cdp_map[i].virt);
+ sc520cdp_map[i].virt = NULL;
+ }
+ }
+}
+
+module_init(init_sc520cdp);
+module_exit(cleanup_sc520cdp);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Sysgo Real-Time Solutions GmbH");
+MODULE_DESCRIPTION("MTD map driver for AMD SC520 Customer Development Platform");