summaryrefslogtreecommitdiffstats
path: root/drivers/mtd/parsers/Kconfig
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/mtd/parsers/Kconfig')
-rw-r--r--drivers/mtd/parsers/Kconfig222
1 files changed, 222 insertions, 0 deletions
diff --git a/drivers/mtd/parsers/Kconfig b/drivers/mtd/parsers/Kconfig
new file mode 100644
index 0000000000..60738edcd5
--- /dev/null
+++ b/drivers/mtd/parsers/Kconfig
@@ -0,0 +1,222 @@
+# SPDX-License-Identifier: GPL-2.0-only
+config MTD_AR7_PARTS
+ tristate "TI AR7 partitioning parser"
+ help
+ TI AR7 partitioning parser support
+
+config MTD_BCM47XX_PARTS
+ tristate "BCM47XX partitioning parser"
+ depends on BCM47XX || ARCH_BCM_5301X
+ help
+ This provides partitions parser for devices based on BCM47xx
+ boards.
+
+config MTD_BCM63XX_PARTS
+ bool "BCM63XX CFE partitioning parser"
+ depends on BCM63XX || BMIPS_GENERIC || COMPILE_TEST
+ select CRC32
+ select MTD_PARSER_IMAGETAG
+ help
+ This provides partition parsing for BCM63xx devices with CFE
+ bootloaders.
+
+config MTD_BRCM_U_BOOT
+ tristate "Broadcom's U-Boot partition parser"
+ depends on ARCH_BCMBCA || COMPILE_TEST
+ help
+ Broadcom uses a custom way of storing U-Boot environment variables.
+ They are placed inside U-Boot partition itself at unspecified offset.
+ It's possible to locate them by looking for a custom header with a
+ magic value. This driver does that and creates subpartitions for
+ each found environment variables block.
+
+config MTD_CMDLINE_PARTS
+ tristate "Command line partition table parsing"
+ depends on MTD
+ help
+ Allow generic configuration of the MTD partition tables via the kernel
+ command line. Multiple flash resources are supported for hardware where
+ different kinds of flash memory are available.
+
+ You will still need the parsing functions to be called by the driver
+ for your particular device. It won't happen automatically. The
+ SA1100 map driver (CONFIG_MTD_SA1100) has an option for this, for
+ example.
+
+ The format for the command line is as follows:
+
+ mtdparts=<mtddef>[;<mtddef]
+ <mtddef> := <mtd-id>:<partdef>[,<partdef>]
+ <partdef> := <size>[@offset][<name>][ro]
+ <mtd-id> := unique id used in mapping driver/device
+ <size> := standard linux memsize OR "-" to denote all
+ remaining space
+ <name> := (NAME)
+
+ Due to the way Linux handles the command line, no spaces are
+ allowed in the partition definition, including mtd id's and partition
+ names.
+
+ Examples:
+
+ 1 flash resource (mtd-id "sa1100"), with 1 single writable partition:
+ mtdparts=sa1100:-
+
+ Same flash, but 2 named partitions, the first one being read-only:
+ mtdparts=sa1100:256k(ARMboot)ro,-(root)
+
+ If unsure, say 'N'.
+
+config MTD_OF_PARTS
+ tristate "OpenFirmware (device tree) partitioning parser"
+ default y
+ depends on OF
+ help
+ This provides a open firmware device tree partition parser
+ which derives the partition map from the children of the
+ flash memory node, as described in
+ Documentation/devicetree/bindings/mtd/mtd.yaml.
+
+config MTD_OF_PARTS_BCM4908
+ bool "BCM4908 partitioning support"
+ depends on MTD_OF_PARTS && (ARCH_BCMBCA || COMPILE_TEST)
+ default ARCH_BCMBCA
+ help
+ This provides partitions parser for BCM4908 family devices
+ that can have multiple "firmware" partitions. It takes care of
+ finding currently used one and backup ones.
+
+config MTD_OF_PARTS_LINKSYS_NS
+ bool "Linksys Northstar partitioning support"
+ depends on MTD_OF_PARTS && (ARCH_BCM_5301X || ARCH_BCMBCA || COMPILE_TEST)
+ default ARCH_BCM_5301X
+ help
+ This provides partitions parser for Linksys devices based on Broadcom
+ Northstar architecture. Linksys commonly uses fixed flash layout with
+ two "firmware" partitions. Currently used firmware has to be detected
+ using CFE environment variable.
+
+config MTD_PARSER_IMAGETAG
+ tristate "Parser for BCM963XX Image Tag format partitions"
+ depends on BCM63XX || BMIPS_GENERIC || COMPILE_TEST
+ select CRC32
+ help
+ Image Tag is the firmware header used by broadcom on their xDSL line
+ of devices. It is used to describe the offsets and lengths of kernel
+ and rootfs partitions.
+ This driver adds support for parsing a partition with an Image Tag
+ header and creates up to two partitions, kernel and rootfs.
+
+config MTD_AFS_PARTS
+ tristate "ARM Firmware Suite partition parsing"
+ depends on (ARM || ARM64)
+ help
+ The ARM Firmware Suite allows the user to divide flash devices into
+ multiple 'images'. Each such image has a header containing its name
+ and offset/size etc.
+
+ If you need code which can detect and parse these tables, and
+ register MTD 'partitions' corresponding to each image detected,
+ enable this option.
+
+ You will still need the parsing functions to be called by the driver
+ for your particular device. It won't happen automatically. The
+ 'physmap' map driver (CONFIG_MTD_PHYSMAP) does this, for example.
+
+config MTD_PARSER_TPLINK_SAFELOADER
+ tristate "TP-Link Safeloader partitions parser"
+ depends on MTD && (ARCH_BCM_5301X || ATH79 || SOC_MT7620 || SOC_MT7621 || COMPILE_TEST)
+ help
+ TP-Link home routers use flash partitions to store various data. Info
+ about flash space layout is stored in a partitions table using a
+ custom ASCII-based format.
+
+ That format was first found in devices with SafeLoader bootloader and
+ was named after it. Later it was adapted to CFE and U-Boot
+ bootloaders.
+
+ This driver reads partitions table, parses it and creates MTD
+ partitions.
+
+config MTD_PARSER_TRX
+ tristate "Parser for TRX format partitions"
+ depends on MTD && (BCM47XX || ARCH_BCM_5301X || ARCH_MEDIATEK || RALINK || COMPILE_TEST)
+ help
+ TRX is a firmware format used by Broadcom on their devices. It
+ may contain up to 3/4 partitions (depending on the version).
+ This driver will parse TRX header and report at least two partitions:
+ kernel and rootfs.
+
+config MTD_SHARPSL_PARTS
+ tristate "Sharp SL Series NAND flash partition parser"
+ depends on MTD_NAND_SHARPSL || COMPILE_TEST
+ help
+ This provides the read-only FTL logic necessary to read the partition
+ table from the NAND flash of Sharp SL Series (Zaurus) and the MTD
+ partition parser using this code.
+
+config MTD_REDBOOT_PARTS
+ tristate "RedBoot partition table parsing"
+ help
+ RedBoot is a ROM monitor and bootloader which deals with multiple
+ 'images' in flash devices by putting a table one of the erase
+ blocks on the device, similar to a partition table, which gives
+ the offsets, lengths and names of all the images stored in the
+ flash.
+
+ If you need code which can detect and parse this table, and register
+ MTD 'partitions' corresponding to each image in the table, enable
+ this option.
+
+ You will still need the parsing functions to be called by the driver
+ for your particular device. It won't happen automatically. The
+ SA1100 map driver (CONFIG_MTD_SA1100) has an option for this, for
+ example.
+
+if MTD_REDBOOT_PARTS
+
+config MTD_REDBOOT_DIRECTORY_BLOCK
+ int "Location of RedBoot partition table"
+ default "-1"
+ help
+ This option is the Linux counterpart to the
+ CYGNUM_REDBOOT_FIS_DIRECTORY_BLOCK RedBoot compile time
+ option.
+
+ The option specifies which Flash sectors holds the RedBoot
+ partition table. A zero or positive value gives an absolute
+ erase block number. A negative value specifies a number of
+ sectors before the end of the device.
+
+ For example "2" means block number 2, "-1" means the last
+ block and "-2" means the penultimate block.
+
+config MTD_REDBOOT_PARTS_UNALLOCATED
+ bool "Include unallocated flash regions"
+ help
+ If you need to register each unallocated flash region as a MTD
+ 'partition', enable this option.
+
+config MTD_REDBOOT_PARTS_READONLY
+ bool "Force read-only for RedBoot system images"
+ help
+ If you need to force read-only for 'RedBoot', 'RedBoot Config' and
+ 'FIS directory' images, enable this option.
+
+endif # MTD_REDBOOT_PARTS
+
+config MTD_QCOMSMEM_PARTS
+ tristate "Qualcomm SMEM flash partition parser"
+ depends on QCOM_SMEM
+ help
+ This provides support for parsing partitions from Shared Memory (SMEM)
+ for NAND and SPI flash on Qualcomm platforms.
+
+config MTD_SERCOMM_PARTS
+ tristate "Sercomm partition table parser"
+ depends on MTD && RALINK
+ help
+ This provides partitions table parser for devices with Sercomm
+ partition map. This partition table contains real partition
+ offsets, which may differ from device to device depending on the
+ number and location of bad blocks on NAND.