diff options
Diffstat (limited to 'drivers/mtd/spi-nor/core.c')
-rw-r--r-- | drivers/mtd/spi-nor/core.c | 177 |
1 files changed, 100 insertions, 77 deletions
diff --git a/drivers/mtd/spi-nor/core.c b/drivers/mtd/spi-nor/core.c index 1c443fe568..4129764fad 100644 --- a/drivers/mtd/spi-nor/core.c +++ b/drivers/mtd/spi-nor/core.c @@ -1060,24 +1060,32 @@ static int spi_nor_read_sr2(struct spi_nor *nor, u8 *sr2) } /** - * spi_nor_erase_chip() - Erase the entire flash memory. + * spi_nor_erase_die() - Erase the entire die. * @nor: pointer to 'struct spi_nor'. + * @addr: address of the die. + * @die_size: size of the die. * * Return: 0 on success, -errno otherwise. */ -static int spi_nor_erase_chip(struct spi_nor *nor) +static int spi_nor_erase_die(struct spi_nor *nor, loff_t addr, size_t die_size) { + bool multi_die = nor->mtd.size != die_size; int ret; - dev_dbg(nor->dev, " %lldKiB\n", (long long)(nor->mtd.size >> 10)); + dev_dbg(nor->dev, " %lldKiB\n", (long long)(die_size >> 10)); if (nor->spimem) { - struct spi_mem_op op = SPI_NOR_CHIP_ERASE_OP; + struct spi_mem_op op = + SPI_NOR_DIE_ERASE_OP(nor->params->die_erase_opcode, + nor->addr_nbytes, addr, multi_die); spi_nor_spimem_setup_op(nor, &op, nor->reg_proto); ret = spi_mem_exec_op(nor->spimem, &op); } else { + if (multi_die) + return -EOPNOTSUPP; + ret = spi_nor_controller_ops_write_reg(nor, SPINOR_OP_CHIP_ERASE, NULL, 0); @@ -1792,6 +1800,51 @@ destroy_erase_cmd_list: return ret; } +static int spi_nor_erase_dice(struct spi_nor *nor, loff_t addr, + size_t len, size_t die_size) +{ + unsigned long timeout; + int ret; + + /* + * Scale the timeout linearly with the size of the flash, with + * a minimum calibrated to an old 2MB flash. We could try to + * pull these from CFI/SFDP, but these values should be good + * enough for now. + */ + timeout = max(CHIP_ERASE_2MB_READY_WAIT_JIFFIES, + CHIP_ERASE_2MB_READY_WAIT_JIFFIES * + (unsigned long)(nor->mtd.size / SZ_2M)); + + do { + ret = spi_nor_lock_device(nor); + if (ret) + return ret; + + ret = spi_nor_write_enable(nor); + if (ret) { + spi_nor_unlock_device(nor); + return ret; + } + + ret = spi_nor_erase_die(nor, addr, die_size); + + spi_nor_unlock_device(nor); + if (ret) + return ret; + + ret = spi_nor_wait_till_ready_with_timeout(nor, timeout); + if (ret) + return ret; + + addr += die_size; + len -= die_size; + + } while (len); + + return 0; +} + /* * Erase an address range on the nor chip. The address range may extend * one or more erase sectors. Return an error if there is a problem erasing. @@ -1799,8 +1852,10 @@ destroy_erase_cmd_list: static int spi_nor_erase(struct mtd_info *mtd, struct erase_info *instr) { struct spi_nor *nor = mtd_to_spi_nor(mtd); - u32 addr, len; - uint32_t rem; + u8 n_dice = nor->params->n_dice; + bool multi_die_erase = false; + u32 addr, len, rem; + size_t die_size; int ret; dev_dbg(nor->dev, "at 0x%llx, len %lld\n", (long long)instr->addr, @@ -1815,39 +1870,22 @@ static int spi_nor_erase(struct mtd_info *mtd, struct erase_info *instr) addr = instr->addr; len = instr->len; + if (n_dice) { + die_size = div_u64(mtd->size, n_dice); + if (!(len & (die_size - 1)) && !(addr & (die_size - 1))) + multi_die_erase = true; + } else { + die_size = mtd->size; + } + ret = spi_nor_prep_and_lock_pe(nor, instr->addr, instr->len); if (ret) return ret; - /* whole-chip erase? */ - if (len == mtd->size && !(nor->flags & SNOR_F_NO_OP_CHIP_ERASE)) { - unsigned long timeout; - - ret = spi_nor_lock_device(nor); - if (ret) - goto erase_err; - - ret = spi_nor_write_enable(nor); - if (ret) { - spi_nor_unlock_device(nor); - goto erase_err; - } - - ret = spi_nor_erase_chip(nor); - spi_nor_unlock_device(nor); - if (ret) - goto erase_err; - - /* - * Scale the timeout linearly with the size of the flash, with - * a minimum calibrated to an old 2MB flash. We could try to - * pull these from CFI/SFDP, but these values should be good - * enough for now. - */ - timeout = max(CHIP_ERASE_2MB_READY_WAIT_JIFFIES, - CHIP_ERASE_2MB_READY_WAIT_JIFFIES * - (unsigned long)(mtd->size / SZ_2M)); - ret = spi_nor_wait_till_ready_with_timeout(nor, timeout); + /* chip (die) erase? */ + if ((len == mtd->size && !(nor->flags & SNOR_F_NO_OP_CHIP_ERASE)) || + multi_die_erase) { + ret = spi_nor_erase_dice(nor, addr, len, die_size); if (ret) goto erase_err; @@ -2146,7 +2184,7 @@ static int spi_nor_write(struct mtd_info *mtd, loff_t to, size_t len, if (is_power_of_2(page_size)) { page_offset = addr & (page_size - 1); } else { - uint64_t aux = addr; + u64 aux = addr; page_offset = do_div(aux, page_size); } @@ -2850,9 +2888,6 @@ static void spi_nor_init_flags(struct spi_nor *nor) nor->flags |= SNOR_F_HAS_SR_BP3_BIT6; } - if (flags & NO_CHIP_ERASE) - nor->flags |= SNOR_F_NO_OP_CHIP_ERASE; - if (flags & SPI_NOR_RWW && nor->params->n_banks > 1 && !nor->controller_ops) nor->flags |= SNOR_F_RWW; @@ -2897,17 +2932,22 @@ static int spi_nor_late_init_params(struct spi_nor *nor) return ret; } + /* Needed by some flashes late_init hooks. */ + spi_nor_init_flags(nor); + if (nor->info->fixups && nor->info->fixups->late_init) { ret = nor->info->fixups->late_init(nor); if (ret) return ret; } + if (!nor->params->die_erase_opcode) + nor->params->die_erase_opcode = SPINOR_OP_CHIP_ERASE; + /* Default method kept for backward compatibility. */ if (!params->set_4byte_addr_mode) params->set_4byte_addr_mode = spi_nor_set_4byte_addr_mode_brwr; - spi_nor_init_flags(nor); spi_nor_init_fixup_flags(nor); /* @@ -3145,8 +3185,20 @@ int spi_nor_set_4byte_addr_mode(struct spi_nor *nor, bool enable) struct spi_nor_flash_parameter *params = nor->params; int ret; + if (enable) { + /* + * If the RESET# pin isn't hooked up properly, or the system + * otherwise doesn't perform a reset command in the boot + * sequence, it's impossible to 100% protect against unexpected + * reboots (e.g., crashes). Warn the user (or hopefully, system + * designer) that this is bad. + */ + WARN_ONCE(nor->flags & SNOR_F_BROKEN_RESET, + "enabling reset hack; may not recover from unexpected reboots\n"); + } + ret = params->set_4byte_addr_mode(nor, enable); - if (ret && ret != -ENOTSUPP) + if (ret && ret != -EOPNOTSUPP) return ret; if (enable) { @@ -3193,20 +3245,8 @@ static int spi_nor_init(struct spi_nor *nor) if (nor->addr_nbytes == 4 && nor->read_proto != SNOR_PROTO_8_8_8_DTR && - !(nor->flags & SNOR_F_4B_OPCODES)) { - /* - * If the RESET# pin isn't hooked up properly, or the system - * otherwise doesn't perform a reset command in the boot - * sequence, it's impossible to 100% protect against unexpected - * reboots (e.g., crashes). Warn the user (or hopefully, system - * designer) that this is bad. - */ - WARN_ONCE(nor->flags & SNOR_F_BROKEN_RESET, - "enabling reset hack; may not recover from unexpected reboots\n"); - err = spi_nor_set_4byte_addr_mode(nor, true); - if (err) - return err; - } + !(nor->flags & SNOR_F_4B_OPCODES)) + return spi_nor_set_4byte_addr_mode(nor, true); return 0; } @@ -3237,7 +3277,8 @@ static void spi_nor_soft_reset(struct spi_nor *nor) ret = spi_mem_exec_op(nor->spimem, &op); if (ret) { - dev_warn(nor->dev, "Software reset failed: %d\n", ret); + if (ret != -EOPNOTSUPP) + dev_warn(nor->dev, "Software reset failed: %d\n", ret); return; } @@ -3452,9 +3493,7 @@ int spi_nor_scan(struct spi_nor *nor, const char *name, { const struct flash_info *info; struct device *dev = nor->dev; - struct mtd_info *mtd = &nor->mtd; int ret; - int i; ret = spi_nor_check(nor); if (ret) @@ -3518,25 +3557,9 @@ int spi_nor_scan(struct spi_nor *nor, const char *name, /* No mtd_info fields should be used up to this point. */ spi_nor_set_mtd_info(nor); - dev_info(dev, "%s (%lld Kbytes)\n", info->name, - (long long)mtd->size >> 10); - - dev_dbg(dev, - "mtd .name = %s, .size = 0x%llx (%lldMiB), " - ".erasesize = 0x%.8x (%uKiB) .numeraseregions = %d\n", - mtd->name, (long long)mtd->size, (long long)(mtd->size >> 20), - mtd->erasesize, mtd->erasesize / 1024, mtd->numeraseregions); - - if (mtd->numeraseregions) - for (i = 0; i < mtd->numeraseregions; i++) - dev_dbg(dev, - "mtd.eraseregions[%d] = { .offset = 0x%llx, " - ".erasesize = 0x%.8x (%uKiB), " - ".numblocks = %d }\n", - i, (long long)mtd->eraseregions[i].offset, - mtd->eraseregions[i].erasesize, - mtd->eraseregions[i].erasesize / 1024, - mtd->eraseregions[i].numblocks); + dev_dbg(dev, "Manufacturer and device ID: %*phN\n", + SPI_NOR_MAX_ID_LEN, nor->id); + return 0; } EXPORT_SYMBOL_GPL(spi_nor_scan); |