summaryrefslogtreecommitdiffstats
path: root/drivers/mtd/ubi/vtbl.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/mtd/ubi/vtbl.c')
-rw-r--r--drivers/mtd/ubi/vtbl.c871
1 files changed, 871 insertions, 0 deletions
diff --git a/drivers/mtd/ubi/vtbl.c b/drivers/mtd/ubi/vtbl.c
new file mode 100644
index 000000000..f700f0e4f
--- /dev/null
+++ b/drivers/mtd/ubi/vtbl.c
@@ -0,0 +1,871 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (c) International Business Machines Corp., 2006
+ * Copyright (c) Nokia Corporation, 2006, 2007
+ *
+ * Author: Artem Bityutskiy (Битюцкий Артём)
+ */
+
+/*
+ * This file includes volume table manipulation code. The volume table is an
+ * on-flash table containing volume meta-data like name, number of reserved
+ * physical eraseblocks, type, etc. The volume table is stored in the so-called
+ * "layout volume".
+ *
+ * The layout volume is an internal volume which is organized as follows. It
+ * consists of two logical eraseblocks - LEB 0 and LEB 1. Each logical
+ * eraseblock stores one volume table copy, i.e. LEB 0 and LEB 1 duplicate each
+ * other. This redundancy guarantees robustness to unclean reboots. The volume
+ * table is basically an array of volume table records. Each record contains
+ * full information about the volume and protected by a CRC checksum. Note,
+ * nowadays we use the atomic LEB change operation when updating the volume
+ * table, so we do not really need 2 LEBs anymore, but we preserve the older
+ * design for the backward compatibility reasons.
+ *
+ * When the volume table is changed, it is first changed in RAM. Then LEB 0 is
+ * erased, and the updated volume table is written back to LEB 0. Then same for
+ * LEB 1. This scheme guarantees recoverability from unclean reboots.
+ *
+ * In this UBI implementation the on-flash volume table does not contain any
+ * information about how much data static volumes contain.
+ *
+ * But it would still be beneficial to store this information in the volume
+ * table. For example, suppose we have a static volume X, and all its physical
+ * eraseblocks became bad for some reasons. Suppose we are attaching the
+ * corresponding MTD device, for some reason we find no logical eraseblocks
+ * corresponding to the volume X. According to the volume table volume X does
+ * exist. So we don't know whether it is just empty or all its physical
+ * eraseblocks went bad. So we cannot alarm the user properly.
+ *
+ * The volume table also stores so-called "update marker", which is used for
+ * volume updates. Before updating the volume, the update marker is set, and
+ * after the update operation is finished, the update marker is cleared. So if
+ * the update operation was interrupted (e.g. by an unclean reboot) - the
+ * update marker is still there and we know that the volume's contents is
+ * damaged.
+ */
+
+#include <linux/crc32.h>
+#include <linux/err.h>
+#include <linux/slab.h>
+#include <asm/div64.h>
+#include "ubi.h"
+
+static void self_vtbl_check(const struct ubi_device *ubi);
+
+/* Empty volume table record */
+static struct ubi_vtbl_record empty_vtbl_record;
+
+/**
+ * ubi_update_layout_vol - helper for updatting layout volumes on flash
+ * @ubi: UBI device description object
+ */
+static int ubi_update_layout_vol(struct ubi_device *ubi)
+{
+ struct ubi_volume *layout_vol;
+ int i, err;
+
+ layout_vol = ubi->volumes[vol_id2idx(ubi, UBI_LAYOUT_VOLUME_ID)];
+ for (i = 0; i < UBI_LAYOUT_VOLUME_EBS; i++) {
+ err = ubi_eba_atomic_leb_change(ubi, layout_vol, i, ubi->vtbl,
+ ubi->vtbl_size);
+ if (err)
+ return err;
+ }
+
+ return 0;
+}
+
+/**
+ * ubi_change_vtbl_record - change volume table record.
+ * @ubi: UBI device description object
+ * @idx: table index to change
+ * @vtbl_rec: new volume table record
+ *
+ * This function changes volume table record @idx. If @vtbl_rec is %NULL, empty
+ * volume table record is written. The caller does not have to calculate CRC of
+ * the record as it is done by this function. Returns zero in case of success
+ * and a negative error code in case of failure.
+ */
+int ubi_change_vtbl_record(struct ubi_device *ubi, int idx,
+ struct ubi_vtbl_record *vtbl_rec)
+{
+ int err;
+ uint32_t crc;
+
+ ubi_assert(idx >= 0 && idx < ubi->vtbl_slots);
+
+ if (!vtbl_rec)
+ vtbl_rec = &empty_vtbl_record;
+ else {
+ crc = crc32(UBI_CRC32_INIT, vtbl_rec, UBI_VTBL_RECORD_SIZE_CRC);
+ vtbl_rec->crc = cpu_to_be32(crc);
+ }
+
+ memcpy(&ubi->vtbl[idx], vtbl_rec, sizeof(struct ubi_vtbl_record));
+ err = ubi_update_layout_vol(ubi);
+
+ self_vtbl_check(ubi);
+ return err ? err : 0;
+}
+
+/**
+ * ubi_vtbl_rename_volumes - rename UBI volumes in the volume table.
+ * @ubi: UBI device description object
+ * @rename_list: list of &struct ubi_rename_entry objects
+ *
+ * This function re-names multiple volumes specified in @req in the volume
+ * table. Returns zero in case of success and a negative error code in case of
+ * failure.
+ */
+int ubi_vtbl_rename_volumes(struct ubi_device *ubi,
+ struct list_head *rename_list)
+{
+ struct ubi_rename_entry *re;
+
+ list_for_each_entry(re, rename_list, list) {
+ uint32_t crc;
+ struct ubi_volume *vol = re->desc->vol;
+ struct ubi_vtbl_record *vtbl_rec = &ubi->vtbl[vol->vol_id];
+
+ if (re->remove) {
+ memcpy(vtbl_rec, &empty_vtbl_record,
+ sizeof(struct ubi_vtbl_record));
+ continue;
+ }
+
+ vtbl_rec->name_len = cpu_to_be16(re->new_name_len);
+ memcpy(vtbl_rec->name, re->new_name, re->new_name_len);
+ memset(vtbl_rec->name + re->new_name_len, 0,
+ UBI_VOL_NAME_MAX + 1 - re->new_name_len);
+ crc = crc32(UBI_CRC32_INIT, vtbl_rec,
+ UBI_VTBL_RECORD_SIZE_CRC);
+ vtbl_rec->crc = cpu_to_be32(crc);
+ }
+
+ return ubi_update_layout_vol(ubi);
+}
+
+/**
+ * vtbl_check - check if volume table is not corrupted and sensible.
+ * @ubi: UBI device description object
+ * @vtbl: volume table
+ *
+ * This function returns zero if @vtbl is all right, %1 if CRC is incorrect,
+ * and %-EINVAL if it contains inconsistent data.
+ */
+static int vtbl_check(const struct ubi_device *ubi,
+ const struct ubi_vtbl_record *vtbl)
+{
+ int i, n, reserved_pebs, alignment, data_pad, vol_type, name_len;
+ int upd_marker, err;
+ uint32_t crc;
+ const char *name;
+
+ for (i = 0; i < ubi->vtbl_slots; i++) {
+ cond_resched();
+
+ reserved_pebs = be32_to_cpu(vtbl[i].reserved_pebs);
+ alignment = be32_to_cpu(vtbl[i].alignment);
+ data_pad = be32_to_cpu(vtbl[i].data_pad);
+ upd_marker = vtbl[i].upd_marker;
+ vol_type = vtbl[i].vol_type;
+ name_len = be16_to_cpu(vtbl[i].name_len);
+ name = &vtbl[i].name[0];
+
+ crc = crc32(UBI_CRC32_INIT, &vtbl[i], UBI_VTBL_RECORD_SIZE_CRC);
+ if (be32_to_cpu(vtbl[i].crc) != crc) {
+ ubi_err(ubi, "bad CRC at record %u: %#08x, not %#08x",
+ i, crc, be32_to_cpu(vtbl[i].crc));
+ ubi_dump_vtbl_record(&vtbl[i], i);
+ return 1;
+ }
+
+ if (reserved_pebs == 0) {
+ if (memcmp(&vtbl[i], &empty_vtbl_record,
+ UBI_VTBL_RECORD_SIZE)) {
+ err = 2;
+ goto bad;
+ }
+ continue;
+ }
+
+ if (reserved_pebs < 0 || alignment < 0 || data_pad < 0 ||
+ name_len < 0) {
+ err = 3;
+ goto bad;
+ }
+
+ if (alignment > ubi->leb_size || alignment == 0) {
+ err = 4;
+ goto bad;
+ }
+
+ n = alignment & (ubi->min_io_size - 1);
+ if (alignment != 1 && n) {
+ err = 5;
+ goto bad;
+ }
+
+ n = ubi->leb_size % alignment;
+ if (data_pad != n) {
+ ubi_err(ubi, "bad data_pad, has to be %d", n);
+ err = 6;
+ goto bad;
+ }
+
+ if (vol_type != UBI_VID_DYNAMIC && vol_type != UBI_VID_STATIC) {
+ err = 7;
+ goto bad;
+ }
+
+ if (upd_marker != 0 && upd_marker != 1) {
+ err = 8;
+ goto bad;
+ }
+
+ if (reserved_pebs > ubi->good_peb_count) {
+ ubi_err(ubi, "too large reserved_pebs %d, good PEBs %d",
+ reserved_pebs, ubi->good_peb_count);
+ err = 9;
+ goto bad;
+ }
+
+ if (name_len > UBI_VOL_NAME_MAX) {
+ err = 10;
+ goto bad;
+ }
+
+ if (name[0] == '\0') {
+ err = 11;
+ goto bad;
+ }
+
+ if (name_len != strnlen(name, name_len + 1)) {
+ err = 12;
+ goto bad;
+ }
+ }
+
+ /* Checks that all names are unique */
+ for (i = 0; i < ubi->vtbl_slots - 1; i++) {
+ for (n = i + 1; n < ubi->vtbl_slots; n++) {
+ int len1 = be16_to_cpu(vtbl[i].name_len);
+ int len2 = be16_to_cpu(vtbl[n].name_len);
+
+ if (len1 > 0 && len1 == len2 &&
+ !strncmp(vtbl[i].name, vtbl[n].name, len1)) {
+ ubi_err(ubi, "volumes %d and %d have the same name \"%s\"",
+ i, n, vtbl[i].name);
+ ubi_dump_vtbl_record(&vtbl[i], i);
+ ubi_dump_vtbl_record(&vtbl[n], n);
+ return -EINVAL;
+ }
+ }
+ }
+
+ return 0;
+
+bad:
+ ubi_err(ubi, "volume table check failed: record %d, error %d", i, err);
+ ubi_dump_vtbl_record(&vtbl[i], i);
+ return -EINVAL;
+}
+
+/**
+ * create_vtbl - create a copy of volume table.
+ * @ubi: UBI device description object
+ * @ai: attaching information
+ * @copy: number of the volume table copy
+ * @vtbl: contents of the volume table
+ *
+ * This function returns zero in case of success and a negative error code in
+ * case of failure.
+ */
+static int create_vtbl(struct ubi_device *ubi, struct ubi_attach_info *ai,
+ int copy, void *vtbl)
+{
+ int err, tries = 0;
+ struct ubi_vid_io_buf *vidb;
+ struct ubi_vid_hdr *vid_hdr;
+ struct ubi_ainf_peb *new_aeb;
+
+ dbg_gen("create volume table (copy #%d)", copy + 1);
+
+ vidb = ubi_alloc_vid_buf(ubi, GFP_KERNEL);
+ if (!vidb)
+ return -ENOMEM;
+
+ vid_hdr = ubi_get_vid_hdr(vidb);
+
+retry:
+ new_aeb = ubi_early_get_peb(ubi, ai);
+ if (IS_ERR(new_aeb)) {
+ err = PTR_ERR(new_aeb);
+ goto out_free;
+ }
+
+ vid_hdr->vol_type = UBI_LAYOUT_VOLUME_TYPE;
+ vid_hdr->vol_id = cpu_to_be32(UBI_LAYOUT_VOLUME_ID);
+ vid_hdr->compat = UBI_LAYOUT_VOLUME_COMPAT;
+ vid_hdr->data_size = vid_hdr->used_ebs =
+ vid_hdr->data_pad = cpu_to_be32(0);
+ vid_hdr->lnum = cpu_to_be32(copy);
+ vid_hdr->sqnum = cpu_to_be64(++ai->max_sqnum);
+
+ /* The EC header is already there, write the VID header */
+ err = ubi_io_write_vid_hdr(ubi, new_aeb->pnum, vidb);
+ if (err)
+ goto write_error;
+
+ /* Write the layout volume contents */
+ err = ubi_io_write_data(ubi, vtbl, new_aeb->pnum, 0, ubi->vtbl_size);
+ if (err)
+ goto write_error;
+
+ /*
+ * And add it to the attaching information. Don't delete the old version
+ * of this LEB as it will be deleted and freed in 'ubi_add_to_av()'.
+ */
+ err = ubi_add_to_av(ubi, ai, new_aeb->pnum, new_aeb->ec, vid_hdr, 0);
+ ubi_free_aeb(ai, new_aeb);
+ ubi_free_vid_buf(vidb);
+ return err;
+
+write_error:
+ if (err == -EIO && ++tries <= 5) {
+ /*
+ * Probably this physical eraseblock went bad, try to pick
+ * another one.
+ */
+ list_add(&new_aeb->u.list, &ai->erase);
+ goto retry;
+ }
+ ubi_free_aeb(ai, new_aeb);
+out_free:
+ ubi_free_vid_buf(vidb);
+ return err;
+
+}
+
+/**
+ * process_lvol - process the layout volume.
+ * @ubi: UBI device description object
+ * @ai: attaching information
+ * @av: layout volume attaching information
+ *
+ * This function is responsible for reading the layout volume, ensuring it is
+ * not corrupted, and recovering from corruptions if needed. Returns volume
+ * table in case of success and a negative error code in case of failure.
+ */
+static struct ubi_vtbl_record *process_lvol(struct ubi_device *ubi,
+ struct ubi_attach_info *ai,
+ struct ubi_ainf_volume *av)
+{
+ int err;
+ struct rb_node *rb;
+ struct ubi_ainf_peb *aeb;
+ struct ubi_vtbl_record *leb[UBI_LAYOUT_VOLUME_EBS] = { NULL, NULL };
+ int leb_corrupted[UBI_LAYOUT_VOLUME_EBS] = {1, 1};
+
+ /*
+ * UBI goes through the following steps when it changes the layout
+ * volume:
+ * a. erase LEB 0;
+ * b. write new data to LEB 0;
+ * c. erase LEB 1;
+ * d. write new data to LEB 1.
+ *
+ * Before the change, both LEBs contain the same data.
+ *
+ * Due to unclean reboots, the contents of LEB 0 may be lost, but there
+ * should LEB 1. So it is OK if LEB 0 is corrupted while LEB 1 is not.
+ * Similarly, LEB 1 may be lost, but there should be LEB 0. And
+ * finally, unclean reboots may result in a situation when neither LEB
+ * 0 nor LEB 1 are corrupted, but they are different. In this case, LEB
+ * 0 contains more recent information.
+ *
+ * So the plan is to first check LEB 0. Then
+ * a. if LEB 0 is OK, it must be containing the most recent data; then
+ * we compare it with LEB 1, and if they are different, we copy LEB
+ * 0 to LEB 1;
+ * b. if LEB 0 is corrupted, but LEB 1 has to be OK, and we copy LEB 1
+ * to LEB 0.
+ */
+
+ dbg_gen("check layout volume");
+
+ /* Read both LEB 0 and LEB 1 into memory */
+ ubi_rb_for_each_entry(rb, aeb, &av->root, u.rb) {
+ leb[aeb->lnum] = vzalloc(ubi->vtbl_size);
+ if (!leb[aeb->lnum]) {
+ err = -ENOMEM;
+ goto out_free;
+ }
+
+ err = ubi_io_read_data(ubi, leb[aeb->lnum], aeb->pnum, 0,
+ ubi->vtbl_size);
+ if (err == UBI_IO_BITFLIPS || mtd_is_eccerr(err))
+ /*
+ * Scrub the PEB later. Note, -EBADMSG indicates an
+ * uncorrectable ECC error, but we have our own CRC and
+ * the data will be checked later. If the data is OK,
+ * the PEB will be scrubbed (because we set
+ * aeb->scrub). If the data is not OK, the contents of
+ * the PEB will be recovered from the second copy, and
+ * aeb->scrub will be cleared in
+ * 'ubi_add_to_av()'.
+ */
+ aeb->scrub = 1;
+ else if (err)
+ goto out_free;
+ }
+
+ err = -EINVAL;
+ if (leb[0]) {
+ leb_corrupted[0] = vtbl_check(ubi, leb[0]);
+ if (leb_corrupted[0] < 0)
+ goto out_free;
+ }
+
+ if (!leb_corrupted[0]) {
+ /* LEB 0 is OK */
+ if (leb[1])
+ leb_corrupted[1] = memcmp(leb[0], leb[1],
+ ubi->vtbl_size);
+ if (leb_corrupted[1]) {
+ ubi_warn(ubi, "volume table copy #2 is corrupted");
+ err = create_vtbl(ubi, ai, 1, leb[0]);
+ if (err)
+ goto out_free;
+ ubi_msg(ubi, "volume table was restored");
+ }
+
+ /* Both LEB 1 and LEB 2 are OK and consistent */
+ vfree(leb[1]);
+ return leb[0];
+ } else {
+ /* LEB 0 is corrupted or does not exist */
+ if (leb[1]) {
+ leb_corrupted[1] = vtbl_check(ubi, leb[1]);
+ if (leb_corrupted[1] < 0)
+ goto out_free;
+ }
+ if (leb_corrupted[1]) {
+ /* Both LEB 0 and LEB 1 are corrupted */
+ ubi_err(ubi, "both volume tables are corrupted");
+ goto out_free;
+ }
+
+ ubi_warn(ubi, "volume table copy #1 is corrupted");
+ err = create_vtbl(ubi, ai, 0, leb[1]);
+ if (err)
+ goto out_free;
+ ubi_msg(ubi, "volume table was restored");
+
+ vfree(leb[0]);
+ return leb[1];
+ }
+
+out_free:
+ vfree(leb[0]);
+ vfree(leb[1]);
+ return ERR_PTR(err);
+}
+
+/**
+ * create_empty_lvol - create empty layout volume.
+ * @ubi: UBI device description object
+ * @ai: attaching information
+ *
+ * This function returns volume table contents in case of success and a
+ * negative error code in case of failure.
+ */
+static struct ubi_vtbl_record *create_empty_lvol(struct ubi_device *ubi,
+ struct ubi_attach_info *ai)
+{
+ int i;
+ struct ubi_vtbl_record *vtbl;
+
+ vtbl = vzalloc(ubi->vtbl_size);
+ if (!vtbl)
+ return ERR_PTR(-ENOMEM);
+
+ for (i = 0; i < ubi->vtbl_slots; i++)
+ memcpy(&vtbl[i], &empty_vtbl_record, UBI_VTBL_RECORD_SIZE);
+
+ for (i = 0; i < UBI_LAYOUT_VOLUME_EBS; i++) {
+ int err;
+
+ err = create_vtbl(ubi, ai, i, vtbl);
+ if (err) {
+ vfree(vtbl);
+ return ERR_PTR(err);
+ }
+ }
+
+ return vtbl;
+}
+
+/**
+ * init_volumes - initialize volume information for existing volumes.
+ * @ubi: UBI device description object
+ * @ai: scanning information
+ * @vtbl: volume table
+ *
+ * This function allocates volume description objects for existing volumes.
+ * Returns zero in case of success and a negative error code in case of
+ * failure.
+ */
+static int init_volumes(struct ubi_device *ubi,
+ const struct ubi_attach_info *ai,
+ const struct ubi_vtbl_record *vtbl)
+{
+ int i, err, reserved_pebs = 0;
+ struct ubi_ainf_volume *av;
+ struct ubi_volume *vol;
+
+ for (i = 0; i < ubi->vtbl_slots; i++) {
+ cond_resched();
+
+ if (be32_to_cpu(vtbl[i].reserved_pebs) == 0)
+ continue; /* Empty record */
+
+ vol = kzalloc(sizeof(struct ubi_volume), GFP_KERNEL);
+ if (!vol)
+ return -ENOMEM;
+
+ vol->reserved_pebs = be32_to_cpu(vtbl[i].reserved_pebs);
+ vol->alignment = be32_to_cpu(vtbl[i].alignment);
+ vol->data_pad = be32_to_cpu(vtbl[i].data_pad);
+ vol->upd_marker = vtbl[i].upd_marker;
+ vol->vol_type = vtbl[i].vol_type == UBI_VID_DYNAMIC ?
+ UBI_DYNAMIC_VOLUME : UBI_STATIC_VOLUME;
+ vol->name_len = be16_to_cpu(vtbl[i].name_len);
+ vol->usable_leb_size = ubi->leb_size - vol->data_pad;
+ memcpy(vol->name, vtbl[i].name, vol->name_len);
+ vol->name[vol->name_len] = '\0';
+ vol->vol_id = i;
+
+ if (vtbl[i].flags & UBI_VTBL_SKIP_CRC_CHECK_FLG)
+ vol->skip_check = 1;
+
+ if (vtbl[i].flags & UBI_VTBL_AUTORESIZE_FLG) {
+ /* Auto re-size flag may be set only for one volume */
+ if (ubi->autoresize_vol_id != -1) {
+ ubi_err(ubi, "more than one auto-resize volume (%d and %d)",
+ ubi->autoresize_vol_id, i);
+ kfree(vol);
+ return -EINVAL;
+ }
+
+ ubi->autoresize_vol_id = i;
+ }
+
+ ubi_assert(!ubi->volumes[i]);
+ ubi->volumes[i] = vol;
+ ubi->vol_count += 1;
+ vol->ubi = ubi;
+ reserved_pebs += vol->reserved_pebs;
+
+ /*
+ * We use ubi->peb_count and not vol->reserved_pebs because
+ * we want to keep the code simple. Otherwise we'd have to
+ * resize/check the bitmap upon volume resize too.
+ * Allocating a few bytes more does not hurt.
+ */
+ err = ubi_fastmap_init_checkmap(vol, ubi->peb_count);
+ if (err)
+ return err;
+
+ /*
+ * In case of dynamic volume UBI knows nothing about how many
+ * data is stored there. So assume the whole volume is used.
+ */
+ if (vol->vol_type == UBI_DYNAMIC_VOLUME) {
+ vol->used_ebs = vol->reserved_pebs;
+ vol->last_eb_bytes = vol->usable_leb_size;
+ vol->used_bytes =
+ (long long)vol->used_ebs * vol->usable_leb_size;
+ continue;
+ }
+
+ /* Static volumes only */
+ av = ubi_find_av(ai, i);
+ if (!av || !av->leb_count) {
+ /*
+ * No eraseblocks belonging to this volume found. We
+ * don't actually know whether this static volume is
+ * completely corrupted or just contains no data. And
+ * we cannot know this as long as data size is not
+ * stored on flash. So we just assume the volume is
+ * empty. FIXME: this should be handled.
+ */
+ continue;
+ }
+
+ if (av->leb_count != av->used_ebs) {
+ /*
+ * We found a static volume which misses several
+ * eraseblocks. Treat it as corrupted.
+ */
+ ubi_warn(ubi, "static volume %d misses %d LEBs - corrupted",
+ av->vol_id, av->used_ebs - av->leb_count);
+ vol->corrupted = 1;
+ continue;
+ }
+
+ vol->used_ebs = av->used_ebs;
+ vol->used_bytes =
+ (long long)(vol->used_ebs - 1) * vol->usable_leb_size;
+ vol->used_bytes += av->last_data_size;
+ vol->last_eb_bytes = av->last_data_size;
+ }
+
+ /* And add the layout volume */
+ vol = kzalloc(sizeof(struct ubi_volume), GFP_KERNEL);
+ if (!vol)
+ return -ENOMEM;
+
+ vol->reserved_pebs = UBI_LAYOUT_VOLUME_EBS;
+ vol->alignment = UBI_LAYOUT_VOLUME_ALIGN;
+ vol->vol_type = UBI_DYNAMIC_VOLUME;
+ vol->name_len = sizeof(UBI_LAYOUT_VOLUME_NAME) - 1;
+ memcpy(vol->name, UBI_LAYOUT_VOLUME_NAME, vol->name_len + 1);
+ vol->usable_leb_size = ubi->leb_size;
+ vol->used_ebs = vol->reserved_pebs;
+ vol->last_eb_bytes = vol->reserved_pebs;
+ vol->used_bytes =
+ (long long)vol->used_ebs * (ubi->leb_size - vol->data_pad);
+ vol->vol_id = UBI_LAYOUT_VOLUME_ID;
+ vol->ref_count = 1;
+
+ ubi_assert(!ubi->volumes[i]);
+ ubi->volumes[vol_id2idx(ubi, vol->vol_id)] = vol;
+ reserved_pebs += vol->reserved_pebs;
+ ubi->vol_count += 1;
+ vol->ubi = ubi;
+ err = ubi_fastmap_init_checkmap(vol, UBI_LAYOUT_VOLUME_EBS);
+ if (err)
+ return err;
+
+ if (reserved_pebs > ubi->avail_pebs) {
+ ubi_err(ubi, "not enough PEBs, required %d, available %d",
+ reserved_pebs, ubi->avail_pebs);
+ if (ubi->corr_peb_count)
+ ubi_err(ubi, "%d PEBs are corrupted and not used",
+ ubi->corr_peb_count);
+ return -ENOSPC;
+ }
+ ubi->rsvd_pebs += reserved_pebs;
+ ubi->avail_pebs -= reserved_pebs;
+
+ return 0;
+}
+
+/**
+ * check_av - check volume attaching information.
+ * @vol: UBI volume description object
+ * @av: volume attaching information
+ *
+ * This function returns zero if the volume attaching information is consistent
+ * to the data read from the volume tabla, and %-EINVAL if not.
+ */
+static int check_av(const struct ubi_volume *vol,
+ const struct ubi_ainf_volume *av)
+{
+ int err;
+
+ if (av->highest_lnum >= vol->reserved_pebs) {
+ err = 1;
+ goto bad;
+ }
+ if (av->leb_count > vol->reserved_pebs) {
+ err = 2;
+ goto bad;
+ }
+ if (av->vol_type != vol->vol_type) {
+ err = 3;
+ goto bad;
+ }
+ if (av->used_ebs > vol->reserved_pebs) {
+ err = 4;
+ goto bad;
+ }
+ if (av->data_pad != vol->data_pad) {
+ err = 5;
+ goto bad;
+ }
+ return 0;
+
+bad:
+ ubi_err(vol->ubi, "bad attaching information, error %d", err);
+ ubi_dump_av(av);
+ ubi_dump_vol_info(vol);
+ return -EINVAL;
+}
+
+/**
+ * check_attaching_info - check that attaching information.
+ * @ubi: UBI device description object
+ * @ai: attaching information
+ *
+ * Even though we protect on-flash data by CRC checksums, we still don't trust
+ * the media. This function ensures that attaching information is consistent to
+ * the information read from the volume table. Returns zero if the attaching
+ * information is OK and %-EINVAL if it is not.
+ */
+static int check_attaching_info(const struct ubi_device *ubi,
+ struct ubi_attach_info *ai)
+{
+ int err, i;
+ struct ubi_ainf_volume *av;
+ struct ubi_volume *vol;
+
+ if (ai->vols_found > UBI_INT_VOL_COUNT + ubi->vtbl_slots) {
+ ubi_err(ubi, "found %d volumes while attaching, maximum is %d + %d",
+ ai->vols_found, UBI_INT_VOL_COUNT, ubi->vtbl_slots);
+ return -EINVAL;
+ }
+
+ if (ai->highest_vol_id >= ubi->vtbl_slots + UBI_INT_VOL_COUNT &&
+ ai->highest_vol_id < UBI_INTERNAL_VOL_START) {
+ ubi_err(ubi, "too large volume ID %d found",
+ ai->highest_vol_id);
+ return -EINVAL;
+ }
+
+ for (i = 0; i < ubi->vtbl_slots + UBI_INT_VOL_COUNT; i++) {
+ cond_resched();
+
+ av = ubi_find_av(ai, i);
+ vol = ubi->volumes[i];
+ if (!vol) {
+ if (av)
+ ubi_remove_av(ai, av);
+ continue;
+ }
+
+ if (vol->reserved_pebs == 0) {
+ ubi_assert(i < ubi->vtbl_slots);
+
+ if (!av)
+ continue;
+
+ /*
+ * During attaching we found a volume which does not
+ * exist according to the information in the volume
+ * table. This must have happened due to an unclean
+ * reboot while the volume was being removed. Discard
+ * these eraseblocks.
+ */
+ ubi_msg(ubi, "finish volume %d removal", av->vol_id);
+ ubi_remove_av(ai, av);
+ } else if (av) {
+ err = check_av(vol, av);
+ if (err)
+ return err;
+ }
+ }
+
+ return 0;
+}
+
+/**
+ * ubi_read_volume_table - read the volume table.
+ * @ubi: UBI device description object
+ * @ai: attaching information
+ *
+ * This function reads volume table, checks it, recover from errors if needed,
+ * or creates it if needed. Returns zero in case of success and a negative
+ * error code in case of failure.
+ */
+int ubi_read_volume_table(struct ubi_device *ubi, struct ubi_attach_info *ai)
+{
+ int err;
+ struct ubi_ainf_volume *av;
+
+ empty_vtbl_record.crc = cpu_to_be32(0xf116c36b);
+
+ /*
+ * The number of supported volumes is limited by the eraseblock size
+ * and by the UBI_MAX_VOLUMES constant.
+ */
+ ubi->vtbl_slots = ubi->leb_size / UBI_VTBL_RECORD_SIZE;
+ if (ubi->vtbl_slots > UBI_MAX_VOLUMES)
+ ubi->vtbl_slots = UBI_MAX_VOLUMES;
+
+ ubi->vtbl_size = ubi->vtbl_slots * UBI_VTBL_RECORD_SIZE;
+ ubi->vtbl_size = ALIGN(ubi->vtbl_size, ubi->min_io_size);
+
+ av = ubi_find_av(ai, UBI_LAYOUT_VOLUME_ID);
+ if (!av) {
+ /*
+ * No logical eraseblocks belonging to the layout volume were
+ * found. This could mean that the flash is just empty. In
+ * this case we create empty layout volume.
+ *
+ * But if flash is not empty this must be a corruption or the
+ * MTD device just contains garbage.
+ */
+ if (ai->is_empty) {
+ ubi->vtbl = create_empty_lvol(ubi, ai);
+ if (IS_ERR(ubi->vtbl))
+ return PTR_ERR(ubi->vtbl);
+ } else {
+ ubi_err(ubi, "the layout volume was not found");
+ return -EINVAL;
+ }
+ } else {
+ if (av->leb_count > UBI_LAYOUT_VOLUME_EBS) {
+ /* This must not happen with proper UBI images */
+ ubi_err(ubi, "too many LEBs (%d) in layout volume",
+ av->leb_count);
+ return -EINVAL;
+ }
+
+ ubi->vtbl = process_lvol(ubi, ai, av);
+ if (IS_ERR(ubi->vtbl))
+ return PTR_ERR(ubi->vtbl);
+ }
+
+ ubi->avail_pebs = ubi->good_peb_count - ubi->corr_peb_count;
+
+ /*
+ * The layout volume is OK, initialize the corresponding in-RAM data
+ * structures.
+ */
+ err = init_volumes(ubi, ai, ubi->vtbl);
+ if (err)
+ goto out_free;
+
+ /*
+ * Make sure that the attaching information is consistent to the
+ * information stored in the volume table.
+ */
+ err = check_attaching_info(ubi, ai);
+ if (err)
+ goto out_free;
+
+ return 0;
+
+out_free:
+ vfree(ubi->vtbl);
+ ubi_free_all_volumes(ubi);
+ return err;
+}
+
+/**
+ * self_vtbl_check - check volume table.
+ * @ubi: UBI device description object
+ */
+static void self_vtbl_check(const struct ubi_device *ubi)
+{
+ if (!ubi_dbg_chk_gen(ubi))
+ return;
+
+ if (vtbl_check(ubi, ubi->vtbl)) {
+ ubi_err(ubi, "self-check failed");
+ BUG();
+ }
+}