summaryrefslogtreecommitdiffstats
path: root/drivers/net/arcnet/com20020.h
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/arcnet/com20020.h')
-rw-r--r--drivers/net/arcnet/com20020.h132
1 files changed, 132 insertions, 0 deletions
diff --git a/drivers/net/arcnet/com20020.h b/drivers/net/arcnet/com20020.h
new file mode 100644
index 0000000000..0bcc5d0a69
--- /dev/null
+++ b/drivers/net/arcnet/com20020.h
@@ -0,0 +1,132 @@
+/*
+ * Linux ARCnet driver - COM20020 chipset support - function declarations
+ *
+ * Written 1997 by David Woodhouse.
+ * Written 1994-1999 by Avery Pennarun.
+ * Derived from skeleton.c by Donald Becker.
+ *
+ * Special thanks to Contemporary Controls, Inc. (www.ccontrols.com)
+ * for sponsoring the further development of this driver.
+ *
+ * **********************
+ *
+ * The original copyright of skeleton.c was as follows:
+ *
+ * skeleton.c Written 1993 by Donald Becker.
+ * Copyright 1993 United States Government as represented by the
+ * Director, National Security Agency. This software may only be used
+ * and distributed according to the terms of the GNU General Public License as
+ * modified by SRC, incorporated herein by reference.
+ *
+ * **********************
+ *
+ * For more details, see drivers/net/arcnet.c
+ *
+ * **********************
+ */
+#ifndef __COM20020_H
+#define __COM20020_H
+#include <linux/leds.h>
+
+int com20020_check(struct net_device *dev);
+int com20020_found(struct net_device *dev, int shared);
+extern const struct net_device_ops com20020_netdev_ops;
+
+/* The number of low I/O ports used by the card. */
+#define ARCNET_TOTAL_SIZE 8
+
+#define PLX_PCI_MAX_CARDS 2
+
+struct ledoffsets {
+ int green;
+ int red;
+};
+
+struct com20020_pci_channel_map {
+ u32 bar;
+ u32 offset;
+ u32 size; /* 0x00 - auto, e.g. length of entire bar */
+};
+
+struct com20020_pci_card_info {
+ const char *name;
+ int devcount;
+
+ struct com20020_pci_channel_map chan_map_tbl[PLX_PCI_MAX_CARDS];
+ struct com20020_pci_channel_map misc_map;
+
+ struct ledoffsets leds[PLX_PCI_MAX_CARDS];
+ int rotary;
+
+ unsigned int flags;
+};
+
+struct com20020_priv {
+ struct com20020_pci_card_info *ci;
+ struct list_head list_dev;
+ resource_size_t misc;
+};
+
+struct com20020_dev {
+ struct list_head list;
+ struct net_device *dev;
+
+ struct led_classdev tx_led;
+ struct led_classdev recon_led;
+
+ struct com20020_priv *pci_priv;
+ int index;
+};
+
+#define COM20020_REG_W_INTMASK 0 /* writable */
+#define COM20020_REG_R_STATUS 0 /* readable */
+#define COM20020_REG_W_COMMAND 1 /* standard arcnet commands */
+#define COM20020_REG_R_DIAGSTAT 1 /* diagnostic status */
+#define COM20020_REG_W_ADDR_HI 2 /* control for IO-mapped memory */
+#define COM20020_REG_W_ADDR_LO 3
+#define COM20020_REG_RW_MEMDATA 4 /* data port for IO-mapped memory */
+#define COM20020_REG_W_SUBADR 5 /* the extended port _XREG refers to */
+#define COM20020_REG_W_CONFIG 6 /* configuration */
+#define COM20020_REG_W_XREG 7 /* extra
+ * (indexed by _CONFIG or _SUBADDR)
+ */
+
+/* in the ADDR_HI register */
+#define RDDATAflag 0x80 /* next access is a read (not a write) */
+
+/* in the DIAGSTAT register */
+#define NEWNXTIDflag 0x02 /* ID to which token is passed has changed */
+
+/* in the CONFIG register */
+#define RESETcfg 0x80 /* put card in reset state */
+#define TXENcfg 0x20 /* enable TX */
+#define XTOcfg(x) ((x) << 3) /* extended timeout */
+
+/* in SETUP register */
+#define PROMISCset 0x10 /* enable RCV_ALL */
+#define P1MODE 0x80 /* enable P1-MODE for Backplane */
+#define SLOWARB 0x01 /* enable Slow Arbitration for >=5Mbps */
+
+/* COM2002x */
+#define SUB_TENTATIVE 0 /* tentative node ID */
+#define SUB_NODE 1 /* node ID */
+#define SUB_SETUP1 2 /* various options */
+#define SUB_TEST 3 /* test/diag register */
+
+/* COM20022 only */
+#define SUB_SETUP2 4 /* sundry options */
+#define SUB_BUSCTL 5 /* bus control options */
+#define SUB_DMACOUNT 6 /* DMA count options */
+
+static inline void com20020_set_subaddress(struct arcnet_local *lp,
+ int ioaddr, int val)
+{
+ if (val < 4) {
+ lp->config = (lp->config & ~0x03) | val;
+ arcnet_outb(lp->config, ioaddr, COM20020_REG_W_CONFIG);
+ } else {
+ arcnet_outb(val, ioaddr, COM20020_REG_W_SUBADR);
+ }
+}
+
+#endif /* __COM20020_H */