summaryrefslogtreecommitdiffstats
path: root/drivers/net/can/xilinx_can.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/can/xilinx_can.c')
-rw-r--r--drivers/net/can/xilinx_can.c1960
1 files changed, 1960 insertions, 0 deletions
diff --git a/drivers/net/can/xilinx_can.c b/drivers/net/can/xilinx_can.c
new file mode 100644
index 0000000000..abe58f1030
--- /dev/null
+++ b/drivers/net/can/xilinx_can.c
@@ -0,0 +1,1960 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/* Xilinx CAN device driver
+ *
+ * Copyright (C) 2012 - 2022 Xilinx, Inc.
+ * Copyright (C) 2009 PetaLogix. All rights reserved.
+ * Copyright (C) 2017 - 2018 Sandvik Mining and Construction Oy
+ *
+ * Description:
+ * This driver is developed for Axi CAN IP and for Zynq CANPS Controller.
+ */
+
+#include <linux/bitfield.h>
+#include <linux/clk.h>
+#include <linux/errno.h>
+#include <linux/ethtool.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/netdevice.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/skbuff.h>
+#include <linux/spinlock.h>
+#include <linux/string.h>
+#include <linux/types.h>
+#include <linux/can/dev.h>
+#include <linux/can/error.h>
+#include <linux/phy/phy.h>
+#include <linux/pm_runtime.h>
+#include <linux/reset.h>
+
+#define DRIVER_NAME "xilinx_can"
+
+/* CAN registers set */
+enum xcan_reg {
+ XCAN_SRR_OFFSET = 0x00, /* Software reset */
+ XCAN_MSR_OFFSET = 0x04, /* Mode select */
+ XCAN_BRPR_OFFSET = 0x08, /* Baud rate prescaler */
+ XCAN_BTR_OFFSET = 0x0C, /* Bit timing */
+ XCAN_ECR_OFFSET = 0x10, /* Error counter */
+ XCAN_ESR_OFFSET = 0x14, /* Error status */
+ XCAN_SR_OFFSET = 0x18, /* Status */
+ XCAN_ISR_OFFSET = 0x1C, /* Interrupt status */
+ XCAN_IER_OFFSET = 0x20, /* Interrupt enable */
+ XCAN_ICR_OFFSET = 0x24, /* Interrupt clear */
+
+ /* not on CAN FD cores */
+ XCAN_TXFIFO_OFFSET = 0x30, /* TX FIFO base */
+ XCAN_RXFIFO_OFFSET = 0x50, /* RX FIFO base */
+ XCAN_AFR_OFFSET = 0x60, /* Acceptance Filter */
+
+ /* only on CAN FD cores */
+ XCAN_F_BRPR_OFFSET = 0x088, /* Data Phase Baud Rate
+ * Prescaler
+ */
+ XCAN_F_BTR_OFFSET = 0x08C, /* Data Phase Bit Timing */
+ XCAN_TRR_OFFSET = 0x0090, /* TX Buffer Ready Request */
+ XCAN_AFR_EXT_OFFSET = 0x00E0, /* Acceptance Filter */
+ XCAN_FSR_OFFSET = 0x00E8, /* RX FIFO Status */
+ XCAN_TXMSG_BASE_OFFSET = 0x0100, /* TX Message Space */
+ XCAN_RXMSG_BASE_OFFSET = 0x1100, /* RX Message Space */
+ XCAN_RXMSG_2_BASE_OFFSET = 0x2100, /* RX Message Space */
+ XCAN_AFR_2_MASK_OFFSET = 0x0A00, /* Acceptance Filter MASK */
+ XCAN_AFR_2_ID_OFFSET = 0x0A04, /* Acceptance Filter ID */
+};
+
+#define XCAN_FRAME_ID_OFFSET(frame_base) ((frame_base) + 0x00)
+#define XCAN_FRAME_DLC_OFFSET(frame_base) ((frame_base) + 0x04)
+#define XCAN_FRAME_DW1_OFFSET(frame_base) ((frame_base) + 0x08)
+#define XCAN_FRAME_DW2_OFFSET(frame_base) ((frame_base) + 0x0C)
+#define XCANFD_FRAME_DW_OFFSET(frame_base) ((frame_base) + 0x08)
+
+#define XCAN_CANFD_FRAME_SIZE 0x48
+#define XCAN_TXMSG_FRAME_OFFSET(n) (XCAN_TXMSG_BASE_OFFSET + \
+ XCAN_CANFD_FRAME_SIZE * (n))
+#define XCAN_RXMSG_FRAME_OFFSET(n) (XCAN_RXMSG_BASE_OFFSET + \
+ XCAN_CANFD_FRAME_SIZE * (n))
+#define XCAN_RXMSG_2_FRAME_OFFSET(n) (XCAN_RXMSG_2_BASE_OFFSET + \
+ XCAN_CANFD_FRAME_SIZE * (n))
+
+/* the single TX mailbox used by this driver on CAN FD HW */
+#define XCAN_TX_MAILBOX_IDX 0
+
+/* CAN register bit masks - XCAN_<REG>_<BIT>_MASK */
+#define XCAN_SRR_CEN_MASK 0x00000002 /* CAN enable */
+#define XCAN_SRR_RESET_MASK 0x00000001 /* Soft Reset the CAN core */
+#define XCAN_MSR_LBACK_MASK 0x00000002 /* Loop back mode select */
+#define XCAN_MSR_SLEEP_MASK 0x00000001 /* Sleep mode select */
+#define XCAN_BRPR_BRP_MASK 0x000000FF /* Baud rate prescaler */
+#define XCAN_BRPR_TDCO_MASK GENMASK(12, 8) /* TDCO */
+#define XCAN_2_BRPR_TDCO_MASK GENMASK(13, 8) /* TDCO for CANFD 2.0 */
+#define XCAN_BTR_SJW_MASK 0x00000180 /* Synchronous jump width */
+#define XCAN_BTR_TS2_MASK 0x00000070 /* Time segment 2 */
+#define XCAN_BTR_TS1_MASK 0x0000000F /* Time segment 1 */
+#define XCAN_BTR_SJW_MASK_CANFD 0x000F0000 /* Synchronous jump width */
+#define XCAN_BTR_TS2_MASK_CANFD 0x00000F00 /* Time segment 2 */
+#define XCAN_BTR_TS1_MASK_CANFD 0x0000003F /* Time segment 1 */
+#define XCAN_ECR_REC_MASK 0x0000FF00 /* Receive error counter */
+#define XCAN_ECR_TEC_MASK 0x000000FF /* Transmit error counter */
+#define XCAN_ESR_ACKER_MASK 0x00000010 /* ACK error */
+#define XCAN_ESR_BERR_MASK 0x00000008 /* Bit error */
+#define XCAN_ESR_STER_MASK 0x00000004 /* Stuff error */
+#define XCAN_ESR_FMER_MASK 0x00000002 /* Form error */
+#define XCAN_ESR_CRCER_MASK 0x00000001 /* CRC error */
+#define XCAN_SR_TDCV_MASK GENMASK(22, 16) /* TDCV Value */
+#define XCAN_SR_TXFLL_MASK 0x00000400 /* TX FIFO is full */
+#define XCAN_SR_ESTAT_MASK 0x00000180 /* Error status */
+#define XCAN_SR_ERRWRN_MASK 0x00000040 /* Error warning */
+#define XCAN_SR_NORMAL_MASK 0x00000008 /* Normal mode */
+#define XCAN_SR_LBACK_MASK 0x00000002 /* Loop back mode */
+#define XCAN_SR_CONFIG_MASK 0x00000001 /* Configuration mode */
+#define XCAN_IXR_RXMNF_MASK 0x00020000 /* RX match not finished */
+#define XCAN_IXR_TXFEMP_MASK 0x00004000 /* TX FIFO Empty */
+#define XCAN_IXR_WKUP_MASK 0x00000800 /* Wake up interrupt */
+#define XCAN_IXR_SLP_MASK 0x00000400 /* Sleep interrupt */
+#define XCAN_IXR_BSOFF_MASK 0x00000200 /* Bus off interrupt */
+#define XCAN_IXR_ERROR_MASK 0x00000100 /* Error interrupt */
+#define XCAN_IXR_RXNEMP_MASK 0x00000080 /* RX FIFO NotEmpty intr */
+#define XCAN_IXR_RXOFLW_MASK 0x00000040 /* RX FIFO Overflow intr */
+#define XCAN_IXR_RXOK_MASK 0x00000010 /* Message received intr */
+#define XCAN_IXR_TXFLL_MASK 0x00000004 /* Tx FIFO Full intr */
+#define XCAN_IXR_TXOK_MASK 0x00000002 /* TX successful intr */
+#define XCAN_IXR_ARBLST_MASK 0x00000001 /* Arbitration lost intr */
+#define XCAN_IDR_ID1_MASK 0xFFE00000 /* Standard msg identifier */
+#define XCAN_IDR_SRR_MASK 0x00100000 /* Substitute remote TXreq */
+#define XCAN_IDR_IDE_MASK 0x00080000 /* Identifier extension */
+#define XCAN_IDR_ID2_MASK 0x0007FFFE /* Extended message ident */
+#define XCAN_IDR_RTR_MASK 0x00000001 /* Remote TX request */
+#define XCAN_DLCR_DLC_MASK 0xF0000000 /* Data length code */
+#define XCAN_FSR_FL_MASK 0x00003F00 /* RX Fill Level */
+#define XCAN_2_FSR_FL_MASK 0x00007F00 /* RX Fill Level */
+#define XCAN_FSR_IRI_MASK 0x00000080 /* RX Increment Read Index */
+#define XCAN_FSR_RI_MASK 0x0000001F /* RX Read Index */
+#define XCAN_2_FSR_RI_MASK 0x0000003F /* RX Read Index */
+#define XCAN_DLCR_EDL_MASK 0x08000000 /* EDL Mask in DLC */
+#define XCAN_DLCR_BRS_MASK 0x04000000 /* BRS Mask in DLC */
+
+/* CAN register bit shift - XCAN_<REG>_<BIT>_SHIFT */
+#define XCAN_BRPR_TDC_ENABLE BIT(16) /* Transmitter Delay Compensation (TDC) Enable */
+#define XCAN_BTR_SJW_SHIFT 7 /* Synchronous jump width */
+#define XCAN_BTR_TS2_SHIFT 4 /* Time segment 2 */
+#define XCAN_BTR_SJW_SHIFT_CANFD 16 /* Synchronous jump width */
+#define XCAN_BTR_TS2_SHIFT_CANFD 8 /* Time segment 2 */
+#define XCAN_IDR_ID1_SHIFT 21 /* Standard Messg Identifier */
+#define XCAN_IDR_ID2_SHIFT 1 /* Extended Message Identifier */
+#define XCAN_DLCR_DLC_SHIFT 28 /* Data length code */
+#define XCAN_ESR_REC_SHIFT 8 /* Rx Error Count */
+
+/* CAN frame length constants */
+#define XCAN_FRAME_MAX_DATA_LEN 8
+#define XCANFD_DW_BYTES 4
+#define XCAN_TIMEOUT (1 * HZ)
+
+/* TX-FIFO-empty interrupt available */
+#define XCAN_FLAG_TXFEMP 0x0001
+/* RX Match Not Finished interrupt available */
+#define XCAN_FLAG_RXMNF 0x0002
+/* Extended acceptance filters with control at 0xE0 */
+#define XCAN_FLAG_EXT_FILTERS 0x0004
+/* TX mailboxes instead of TX FIFO */
+#define XCAN_FLAG_TX_MAILBOXES 0x0008
+/* RX FIFO with each buffer in separate registers at 0x1100
+ * instead of the regular FIFO at 0x50
+ */
+#define XCAN_FLAG_RX_FIFO_MULTI 0x0010
+#define XCAN_FLAG_CANFD_2 0x0020
+
+enum xcan_ip_type {
+ XAXI_CAN = 0,
+ XZYNQ_CANPS,
+ XAXI_CANFD,
+ XAXI_CANFD_2_0,
+};
+
+struct xcan_devtype_data {
+ enum xcan_ip_type cantype;
+ unsigned int flags;
+ const struct can_bittiming_const *bittiming_const;
+ const char *bus_clk_name;
+ unsigned int btr_ts2_shift;
+ unsigned int btr_sjw_shift;
+};
+
+/**
+ * struct xcan_priv - This definition define CAN driver instance
+ * @can: CAN private data structure.
+ * @tx_lock: Lock for synchronizing TX interrupt handling
+ * @tx_head: Tx CAN packets ready to send on the queue
+ * @tx_tail: Tx CAN packets successfully sended on the queue
+ * @tx_max: Maximum number packets the driver can send
+ * @napi: NAPI structure
+ * @read_reg: For reading data from CAN registers
+ * @write_reg: For writing data to CAN registers
+ * @dev: Network device data structure
+ * @reg_base: Ioremapped address to registers
+ * @irq_flags: For request_irq()
+ * @bus_clk: Pointer to struct clk
+ * @can_clk: Pointer to struct clk
+ * @devtype: Device type specific constants
+ * @transceiver: Optional pointer to associated CAN transceiver
+ * @rstc: Pointer to reset control
+ */
+struct xcan_priv {
+ struct can_priv can;
+ spinlock_t tx_lock; /* Lock for synchronizing TX interrupt handling */
+ unsigned int tx_head;
+ unsigned int tx_tail;
+ unsigned int tx_max;
+ struct napi_struct napi;
+ u32 (*read_reg)(const struct xcan_priv *priv, enum xcan_reg reg);
+ void (*write_reg)(const struct xcan_priv *priv, enum xcan_reg reg,
+ u32 val);
+ struct device *dev;
+ void __iomem *reg_base;
+ unsigned long irq_flags;
+ struct clk *bus_clk;
+ struct clk *can_clk;
+ struct xcan_devtype_data devtype;
+ struct phy *transceiver;
+ struct reset_control *rstc;
+};
+
+/* CAN Bittiming constants as per Xilinx CAN specs */
+static const struct can_bittiming_const xcan_bittiming_const = {
+ .name = DRIVER_NAME,
+ .tseg1_min = 1,
+ .tseg1_max = 16,
+ .tseg2_min = 1,
+ .tseg2_max = 8,
+ .sjw_max = 4,
+ .brp_min = 1,
+ .brp_max = 256,
+ .brp_inc = 1,
+};
+
+/* AXI CANFD Arbitration Bittiming constants as per AXI CANFD 1.0 spec */
+static const struct can_bittiming_const xcan_bittiming_const_canfd = {
+ .name = DRIVER_NAME,
+ .tseg1_min = 1,
+ .tseg1_max = 64,
+ .tseg2_min = 1,
+ .tseg2_max = 16,
+ .sjw_max = 16,
+ .brp_min = 1,
+ .brp_max = 256,
+ .brp_inc = 1,
+};
+
+/* AXI CANFD Data Bittiming constants as per AXI CANFD 1.0 specs */
+static const struct can_bittiming_const xcan_data_bittiming_const_canfd = {
+ .name = DRIVER_NAME,
+ .tseg1_min = 1,
+ .tseg1_max = 16,
+ .tseg2_min = 1,
+ .tseg2_max = 8,
+ .sjw_max = 8,
+ .brp_min = 1,
+ .brp_max = 256,
+ .brp_inc = 1,
+};
+
+/* AXI CANFD 2.0 Arbitration Bittiming constants as per AXI CANFD 2.0 spec */
+static const struct can_bittiming_const xcan_bittiming_const_canfd2 = {
+ .name = DRIVER_NAME,
+ .tseg1_min = 1,
+ .tseg1_max = 256,
+ .tseg2_min = 1,
+ .tseg2_max = 128,
+ .sjw_max = 128,
+ .brp_min = 1,
+ .brp_max = 256,
+ .brp_inc = 1,
+};
+
+/* AXI CANFD 2.0 Data Bittiming constants as per AXI CANFD 2.0 spec */
+static const struct can_bittiming_const xcan_data_bittiming_const_canfd2 = {
+ .name = DRIVER_NAME,
+ .tseg1_min = 1,
+ .tseg1_max = 32,
+ .tseg2_min = 1,
+ .tseg2_max = 16,
+ .sjw_max = 16,
+ .brp_min = 1,
+ .brp_max = 256,
+ .brp_inc = 1,
+};
+
+/* Transmission Delay Compensation constants for CANFD 1.0 */
+static const struct can_tdc_const xcan_tdc_const_canfd = {
+ .tdcv_min = 0,
+ .tdcv_max = 0, /* Manual mode not supported. */
+ .tdco_min = 0,
+ .tdco_max = 32,
+ .tdcf_min = 0, /* Filter window not supported */
+ .tdcf_max = 0,
+};
+
+/* Transmission Delay Compensation constants for CANFD 2.0 */
+static const struct can_tdc_const xcan_tdc_const_canfd2 = {
+ .tdcv_min = 0,
+ .tdcv_max = 0, /* Manual mode not supported. */
+ .tdco_min = 0,
+ .tdco_max = 64,
+ .tdcf_min = 0, /* Filter window not supported */
+ .tdcf_max = 0,
+};
+
+/**
+ * xcan_write_reg_le - Write a value to the device register little endian
+ * @priv: Driver private data structure
+ * @reg: Register offset
+ * @val: Value to write at the Register offset
+ *
+ * Write data to the paricular CAN register
+ */
+static void xcan_write_reg_le(const struct xcan_priv *priv, enum xcan_reg reg,
+ u32 val)
+{
+ iowrite32(val, priv->reg_base + reg);
+}
+
+/**
+ * xcan_read_reg_le - Read a value from the device register little endian
+ * @priv: Driver private data structure
+ * @reg: Register offset
+ *
+ * Read data from the particular CAN register
+ * Return: value read from the CAN register
+ */
+static u32 xcan_read_reg_le(const struct xcan_priv *priv, enum xcan_reg reg)
+{
+ return ioread32(priv->reg_base + reg);
+}
+
+/**
+ * xcan_write_reg_be - Write a value to the device register big endian
+ * @priv: Driver private data structure
+ * @reg: Register offset
+ * @val: Value to write at the Register offset
+ *
+ * Write data to the paricular CAN register
+ */
+static void xcan_write_reg_be(const struct xcan_priv *priv, enum xcan_reg reg,
+ u32 val)
+{
+ iowrite32be(val, priv->reg_base + reg);
+}
+
+/**
+ * xcan_read_reg_be - Read a value from the device register big endian
+ * @priv: Driver private data structure
+ * @reg: Register offset
+ *
+ * Read data from the particular CAN register
+ * Return: value read from the CAN register
+ */
+static u32 xcan_read_reg_be(const struct xcan_priv *priv, enum xcan_reg reg)
+{
+ return ioread32be(priv->reg_base + reg);
+}
+
+/**
+ * xcan_rx_int_mask - Get the mask for the receive interrupt
+ * @priv: Driver private data structure
+ *
+ * Return: The receive interrupt mask used by the driver on this HW
+ */
+static u32 xcan_rx_int_mask(const struct xcan_priv *priv)
+{
+ /* RXNEMP is better suited for our use case as it cannot be cleared
+ * while the FIFO is non-empty, but CAN FD HW does not have it
+ */
+ if (priv->devtype.flags & XCAN_FLAG_RX_FIFO_MULTI)
+ return XCAN_IXR_RXOK_MASK;
+ else
+ return XCAN_IXR_RXNEMP_MASK;
+}
+
+/**
+ * set_reset_mode - Resets the CAN device mode
+ * @ndev: Pointer to net_device structure
+ *
+ * This is the driver reset mode routine.The driver
+ * enters into configuration mode.
+ *
+ * Return: 0 on success and failure value on error
+ */
+static int set_reset_mode(struct net_device *ndev)
+{
+ struct xcan_priv *priv = netdev_priv(ndev);
+ unsigned long timeout;
+
+ priv->write_reg(priv, XCAN_SRR_OFFSET, XCAN_SRR_RESET_MASK);
+
+ timeout = jiffies + XCAN_TIMEOUT;
+ while (!(priv->read_reg(priv, XCAN_SR_OFFSET) & XCAN_SR_CONFIG_MASK)) {
+ if (time_after(jiffies, timeout)) {
+ netdev_warn(ndev, "timed out for config mode\n");
+ return -ETIMEDOUT;
+ }
+ usleep_range(500, 10000);
+ }
+
+ /* reset clears FIFOs */
+ priv->tx_head = 0;
+ priv->tx_tail = 0;
+
+ return 0;
+}
+
+/**
+ * xcan_set_bittiming - CAN set bit timing routine
+ * @ndev: Pointer to net_device structure
+ *
+ * This is the driver set bittiming routine.
+ * Return: 0 on success and failure value on error
+ */
+static int xcan_set_bittiming(struct net_device *ndev)
+{
+ struct xcan_priv *priv = netdev_priv(ndev);
+ struct can_bittiming *bt = &priv->can.bittiming;
+ struct can_bittiming *dbt = &priv->can.data_bittiming;
+ u32 btr0, btr1;
+ u32 is_config_mode;
+
+ /* Check whether Xilinx CAN is in configuration mode.
+ * It cannot set bit timing if Xilinx CAN is not in configuration mode.
+ */
+ is_config_mode = priv->read_reg(priv, XCAN_SR_OFFSET) &
+ XCAN_SR_CONFIG_MASK;
+ if (!is_config_mode) {
+ netdev_alert(ndev,
+ "BUG! Cannot set bittiming - CAN is not in config mode\n");
+ return -EPERM;
+ }
+
+ /* Setting Baud Rate prescaler value in BRPR Register */
+ btr0 = (bt->brp - 1);
+
+ /* Setting Time Segment 1 in BTR Register */
+ btr1 = (bt->prop_seg + bt->phase_seg1 - 1);
+
+ /* Setting Time Segment 2 in BTR Register */
+ btr1 |= (bt->phase_seg2 - 1) << priv->devtype.btr_ts2_shift;
+
+ /* Setting Synchronous jump width in BTR Register */
+ btr1 |= (bt->sjw - 1) << priv->devtype.btr_sjw_shift;
+
+ priv->write_reg(priv, XCAN_BRPR_OFFSET, btr0);
+ priv->write_reg(priv, XCAN_BTR_OFFSET, btr1);
+
+ if (priv->devtype.cantype == XAXI_CANFD ||
+ priv->devtype.cantype == XAXI_CANFD_2_0) {
+ /* Setting Baud Rate prescaler value in F_BRPR Register */
+ btr0 = dbt->brp - 1;
+ if (can_tdc_is_enabled(&priv->can)) {
+ if (priv->devtype.cantype == XAXI_CANFD)
+ btr0 |= FIELD_PREP(XCAN_BRPR_TDCO_MASK, priv->can.tdc.tdco) |
+ XCAN_BRPR_TDC_ENABLE;
+ else
+ btr0 |= FIELD_PREP(XCAN_2_BRPR_TDCO_MASK, priv->can.tdc.tdco) |
+ XCAN_BRPR_TDC_ENABLE;
+ }
+
+ /* Setting Time Segment 1 in BTR Register */
+ btr1 = dbt->prop_seg + dbt->phase_seg1 - 1;
+
+ /* Setting Time Segment 2 in BTR Register */
+ btr1 |= (dbt->phase_seg2 - 1) << priv->devtype.btr_ts2_shift;
+
+ /* Setting Synchronous jump width in BTR Register */
+ btr1 |= (dbt->sjw - 1) << priv->devtype.btr_sjw_shift;
+
+ priv->write_reg(priv, XCAN_F_BRPR_OFFSET, btr0);
+ priv->write_reg(priv, XCAN_F_BTR_OFFSET, btr1);
+ }
+
+ netdev_dbg(ndev, "BRPR=0x%08x, BTR=0x%08x\n",
+ priv->read_reg(priv, XCAN_BRPR_OFFSET),
+ priv->read_reg(priv, XCAN_BTR_OFFSET));
+
+ return 0;
+}
+
+/**
+ * xcan_chip_start - This the drivers start routine
+ * @ndev: Pointer to net_device structure
+ *
+ * This is the drivers start routine.
+ * Based on the State of the CAN device it puts
+ * the CAN device into a proper mode.
+ *
+ * Return: 0 on success and failure value on error
+ */
+static int xcan_chip_start(struct net_device *ndev)
+{
+ struct xcan_priv *priv = netdev_priv(ndev);
+ u32 reg_msr;
+ int err;
+ u32 ier;
+
+ /* Check if it is in reset mode */
+ err = set_reset_mode(ndev);
+ if (err < 0)
+ return err;
+
+ err = xcan_set_bittiming(ndev);
+ if (err < 0)
+ return err;
+
+ /* Enable interrupts
+ *
+ * We enable the ERROR interrupt even with
+ * CAN_CTRLMODE_BERR_REPORTING disabled as there is no
+ * dedicated interrupt for a state change to
+ * ERROR_WARNING/ERROR_PASSIVE.
+ */
+ ier = XCAN_IXR_TXOK_MASK | XCAN_IXR_BSOFF_MASK |
+ XCAN_IXR_WKUP_MASK | XCAN_IXR_SLP_MASK |
+ XCAN_IXR_ERROR_MASK | XCAN_IXR_RXOFLW_MASK |
+ XCAN_IXR_ARBLST_MASK | xcan_rx_int_mask(priv);
+
+ if (priv->devtype.flags & XCAN_FLAG_RXMNF)
+ ier |= XCAN_IXR_RXMNF_MASK;
+
+ priv->write_reg(priv, XCAN_IER_OFFSET, ier);
+
+ /* Check whether it is loopback mode or normal mode */
+ if (priv->can.ctrlmode & CAN_CTRLMODE_LOOPBACK)
+ reg_msr = XCAN_MSR_LBACK_MASK;
+ else
+ reg_msr = 0x0;
+
+ /* enable the first extended filter, if any, as cores with extended
+ * filtering default to non-receipt if all filters are disabled
+ */
+ if (priv->devtype.flags & XCAN_FLAG_EXT_FILTERS)
+ priv->write_reg(priv, XCAN_AFR_EXT_OFFSET, 0x00000001);
+
+ priv->write_reg(priv, XCAN_MSR_OFFSET, reg_msr);
+ priv->write_reg(priv, XCAN_SRR_OFFSET, XCAN_SRR_CEN_MASK);
+
+ netdev_dbg(ndev, "status:#x%08x\n",
+ priv->read_reg(priv, XCAN_SR_OFFSET));
+
+ priv->can.state = CAN_STATE_ERROR_ACTIVE;
+ return 0;
+}
+
+/**
+ * xcan_do_set_mode - This sets the mode of the driver
+ * @ndev: Pointer to net_device structure
+ * @mode: Tells the mode of the driver
+ *
+ * This check the drivers state and calls the corresponding modes to set.
+ *
+ * Return: 0 on success and failure value on error
+ */
+static int xcan_do_set_mode(struct net_device *ndev, enum can_mode mode)
+{
+ int ret;
+
+ switch (mode) {
+ case CAN_MODE_START:
+ ret = xcan_chip_start(ndev);
+ if (ret < 0) {
+ netdev_err(ndev, "xcan_chip_start failed!\n");
+ return ret;
+ }
+ netif_wake_queue(ndev);
+ break;
+ default:
+ ret = -EOPNOTSUPP;
+ break;
+ }
+
+ return ret;
+}
+
+/**
+ * xcan_write_frame - Write a frame to HW
+ * @ndev: Pointer to net_device structure
+ * @skb: sk_buff pointer that contains data to be Txed
+ * @frame_offset: Register offset to write the frame to
+ */
+static void xcan_write_frame(struct net_device *ndev, struct sk_buff *skb,
+ int frame_offset)
+{
+ u32 id, dlc, data[2] = {0, 0};
+ struct canfd_frame *cf = (struct canfd_frame *)skb->data;
+ u32 ramoff, dwindex = 0, i;
+ struct xcan_priv *priv = netdev_priv(ndev);
+
+ /* Watch carefully on the bit sequence */
+ if (cf->can_id & CAN_EFF_FLAG) {
+ /* Extended CAN ID format */
+ id = ((cf->can_id & CAN_EFF_MASK) << XCAN_IDR_ID2_SHIFT) &
+ XCAN_IDR_ID2_MASK;
+ id |= (((cf->can_id & CAN_EFF_MASK) >>
+ (CAN_EFF_ID_BITS - CAN_SFF_ID_BITS)) <<
+ XCAN_IDR_ID1_SHIFT) & XCAN_IDR_ID1_MASK;
+
+ /* The substibute remote TX request bit should be "1"
+ * for extended frames as in the Xilinx CAN datasheet
+ */
+ id |= XCAN_IDR_IDE_MASK | XCAN_IDR_SRR_MASK;
+
+ if (cf->can_id & CAN_RTR_FLAG)
+ /* Extended frames remote TX request */
+ id |= XCAN_IDR_RTR_MASK;
+ } else {
+ /* Standard CAN ID format */
+ id = ((cf->can_id & CAN_SFF_MASK) << XCAN_IDR_ID1_SHIFT) &
+ XCAN_IDR_ID1_MASK;
+
+ if (cf->can_id & CAN_RTR_FLAG)
+ /* Standard frames remote TX request */
+ id |= XCAN_IDR_SRR_MASK;
+ }
+
+ dlc = can_fd_len2dlc(cf->len) << XCAN_DLCR_DLC_SHIFT;
+ if (can_is_canfd_skb(skb)) {
+ if (cf->flags & CANFD_BRS)
+ dlc |= XCAN_DLCR_BRS_MASK;
+ dlc |= XCAN_DLCR_EDL_MASK;
+ }
+
+ if (!(priv->devtype.flags & XCAN_FLAG_TX_MAILBOXES) &&
+ (priv->devtype.flags & XCAN_FLAG_TXFEMP))
+ can_put_echo_skb(skb, ndev, priv->tx_head % priv->tx_max, 0);
+ else
+ can_put_echo_skb(skb, ndev, 0, 0);
+
+ priv->tx_head++;
+
+ priv->write_reg(priv, XCAN_FRAME_ID_OFFSET(frame_offset), id);
+ /* If the CAN frame is RTR frame this write triggers transmission
+ * (not on CAN FD)
+ */
+ priv->write_reg(priv, XCAN_FRAME_DLC_OFFSET(frame_offset), dlc);
+ if (priv->devtype.cantype == XAXI_CANFD ||
+ priv->devtype.cantype == XAXI_CANFD_2_0) {
+ for (i = 0; i < cf->len; i += 4) {
+ ramoff = XCANFD_FRAME_DW_OFFSET(frame_offset) +
+ (dwindex * XCANFD_DW_BYTES);
+ priv->write_reg(priv, ramoff,
+ be32_to_cpup((__be32 *)(cf->data + i)));
+ dwindex++;
+ }
+ } else {
+ if (cf->len > 0)
+ data[0] = be32_to_cpup((__be32 *)(cf->data + 0));
+ if (cf->len > 4)
+ data[1] = be32_to_cpup((__be32 *)(cf->data + 4));
+
+ if (!(cf->can_id & CAN_RTR_FLAG)) {
+ priv->write_reg(priv,
+ XCAN_FRAME_DW1_OFFSET(frame_offset),
+ data[0]);
+ /* If the CAN frame is Standard/Extended frame this
+ * write triggers transmission (not on CAN FD)
+ */
+ priv->write_reg(priv,
+ XCAN_FRAME_DW2_OFFSET(frame_offset),
+ data[1]);
+ }
+ }
+}
+
+/**
+ * xcan_start_xmit_fifo - Starts the transmission (FIFO mode)
+ * @skb: sk_buff pointer that contains data to be Txed
+ * @ndev: Pointer to net_device structure
+ *
+ * Return: 0 on success, -ENOSPC if FIFO is full.
+ */
+static int xcan_start_xmit_fifo(struct sk_buff *skb, struct net_device *ndev)
+{
+ struct xcan_priv *priv = netdev_priv(ndev);
+ unsigned long flags;
+
+ /* Check if the TX buffer is full */
+ if (unlikely(priv->read_reg(priv, XCAN_SR_OFFSET) &
+ XCAN_SR_TXFLL_MASK))
+ return -ENOSPC;
+
+ spin_lock_irqsave(&priv->tx_lock, flags);
+
+ xcan_write_frame(ndev, skb, XCAN_TXFIFO_OFFSET);
+
+ /* Clear TX-FIFO-empty interrupt for xcan_tx_interrupt() */
+ if (priv->tx_max > 1)
+ priv->write_reg(priv, XCAN_ICR_OFFSET, XCAN_IXR_TXFEMP_MASK);
+
+ /* Check if the TX buffer is full */
+ if ((priv->tx_head - priv->tx_tail) == priv->tx_max)
+ netif_stop_queue(ndev);
+
+ spin_unlock_irqrestore(&priv->tx_lock, flags);
+
+ return 0;
+}
+
+/**
+ * xcan_start_xmit_mailbox - Starts the transmission (mailbox mode)
+ * @skb: sk_buff pointer that contains data to be Txed
+ * @ndev: Pointer to net_device structure
+ *
+ * Return: 0 on success, -ENOSPC if there is no space
+ */
+static int xcan_start_xmit_mailbox(struct sk_buff *skb, struct net_device *ndev)
+{
+ struct xcan_priv *priv = netdev_priv(ndev);
+ unsigned long flags;
+
+ if (unlikely(priv->read_reg(priv, XCAN_TRR_OFFSET) &
+ BIT(XCAN_TX_MAILBOX_IDX)))
+ return -ENOSPC;
+
+ spin_lock_irqsave(&priv->tx_lock, flags);
+
+ xcan_write_frame(ndev, skb,
+ XCAN_TXMSG_FRAME_OFFSET(XCAN_TX_MAILBOX_IDX));
+
+ /* Mark buffer as ready for transmit */
+ priv->write_reg(priv, XCAN_TRR_OFFSET, BIT(XCAN_TX_MAILBOX_IDX));
+
+ netif_stop_queue(ndev);
+
+ spin_unlock_irqrestore(&priv->tx_lock, flags);
+
+ return 0;
+}
+
+/**
+ * xcan_start_xmit - Starts the transmission
+ * @skb: sk_buff pointer that contains data to be Txed
+ * @ndev: Pointer to net_device structure
+ *
+ * This function is invoked from upper layers to initiate transmission.
+ *
+ * Return: NETDEV_TX_OK on success and NETDEV_TX_BUSY when the tx queue is full
+ */
+static netdev_tx_t xcan_start_xmit(struct sk_buff *skb, struct net_device *ndev)
+{
+ struct xcan_priv *priv = netdev_priv(ndev);
+ int ret;
+
+ if (can_dev_dropped_skb(ndev, skb))
+ return NETDEV_TX_OK;
+
+ if (priv->devtype.flags & XCAN_FLAG_TX_MAILBOXES)
+ ret = xcan_start_xmit_mailbox(skb, ndev);
+ else
+ ret = xcan_start_xmit_fifo(skb, ndev);
+
+ if (ret < 0) {
+ netdev_err(ndev, "BUG!, TX full when queue awake!\n");
+ netif_stop_queue(ndev);
+ return NETDEV_TX_BUSY;
+ }
+
+ return NETDEV_TX_OK;
+}
+
+/**
+ * xcan_rx - Is called from CAN isr to complete the received
+ * frame processing
+ * @ndev: Pointer to net_device structure
+ * @frame_base: Register offset to the frame to be read
+ *
+ * This function is invoked from the CAN isr(poll) to process the Rx frames. It
+ * does minimal processing and invokes "netif_receive_skb" to complete further
+ * processing.
+ * Return: 1 on success and 0 on failure.
+ */
+static int xcan_rx(struct net_device *ndev, int frame_base)
+{
+ struct xcan_priv *priv = netdev_priv(ndev);
+ struct net_device_stats *stats = &ndev->stats;
+ struct can_frame *cf;
+ struct sk_buff *skb;
+ u32 id_xcan, dlc, data[2] = {0, 0};
+
+ skb = alloc_can_skb(ndev, &cf);
+ if (unlikely(!skb)) {
+ stats->rx_dropped++;
+ return 0;
+ }
+
+ /* Read a frame from Xilinx zynq CANPS */
+ id_xcan = priv->read_reg(priv, XCAN_FRAME_ID_OFFSET(frame_base));
+ dlc = priv->read_reg(priv, XCAN_FRAME_DLC_OFFSET(frame_base)) >>
+ XCAN_DLCR_DLC_SHIFT;
+
+ /* Change Xilinx CAN data length format to socketCAN data format */
+ cf->len = can_cc_dlc2len(dlc);
+
+ /* Change Xilinx CAN ID format to socketCAN ID format */
+ if (id_xcan & XCAN_IDR_IDE_MASK) {
+ /* The received frame is an Extended format frame */
+ cf->can_id = (id_xcan & XCAN_IDR_ID1_MASK) >> 3;
+ cf->can_id |= (id_xcan & XCAN_IDR_ID2_MASK) >>
+ XCAN_IDR_ID2_SHIFT;
+ cf->can_id |= CAN_EFF_FLAG;
+ if (id_xcan & XCAN_IDR_RTR_MASK)
+ cf->can_id |= CAN_RTR_FLAG;
+ } else {
+ /* The received frame is a standard format frame */
+ cf->can_id = (id_xcan & XCAN_IDR_ID1_MASK) >>
+ XCAN_IDR_ID1_SHIFT;
+ if (id_xcan & XCAN_IDR_SRR_MASK)
+ cf->can_id |= CAN_RTR_FLAG;
+ }
+
+ /* DW1/DW2 must always be read to remove message from RXFIFO */
+ data[0] = priv->read_reg(priv, XCAN_FRAME_DW1_OFFSET(frame_base));
+ data[1] = priv->read_reg(priv, XCAN_FRAME_DW2_OFFSET(frame_base));
+
+ if (!(cf->can_id & CAN_RTR_FLAG)) {
+ /* Change Xilinx CAN data format to socketCAN data format */
+ if (cf->len > 0)
+ *(__be32 *)(cf->data) = cpu_to_be32(data[0]);
+ if (cf->len > 4)
+ *(__be32 *)(cf->data + 4) = cpu_to_be32(data[1]);
+
+ stats->rx_bytes += cf->len;
+ }
+ stats->rx_packets++;
+
+ netif_receive_skb(skb);
+
+ return 1;
+}
+
+/**
+ * xcanfd_rx - Is called from CAN isr to complete the received
+ * frame processing
+ * @ndev: Pointer to net_device structure
+ * @frame_base: Register offset to the frame to be read
+ *
+ * This function is invoked from the CAN isr(poll) to process the Rx frames. It
+ * does minimal processing and invokes "netif_receive_skb" to complete further
+ * processing.
+ * Return: 1 on success and 0 on failure.
+ */
+static int xcanfd_rx(struct net_device *ndev, int frame_base)
+{
+ struct xcan_priv *priv = netdev_priv(ndev);
+ struct net_device_stats *stats = &ndev->stats;
+ struct canfd_frame *cf;
+ struct sk_buff *skb;
+ u32 id_xcan, dlc, data[2] = {0, 0}, dwindex = 0, i, dw_offset;
+
+ id_xcan = priv->read_reg(priv, XCAN_FRAME_ID_OFFSET(frame_base));
+ dlc = priv->read_reg(priv, XCAN_FRAME_DLC_OFFSET(frame_base));
+ if (dlc & XCAN_DLCR_EDL_MASK)
+ skb = alloc_canfd_skb(ndev, &cf);
+ else
+ skb = alloc_can_skb(ndev, (struct can_frame **)&cf);
+
+ if (unlikely(!skb)) {
+ stats->rx_dropped++;
+ return 0;
+ }
+
+ /* Change Xilinx CANFD data length format to socketCAN data
+ * format
+ */
+ if (dlc & XCAN_DLCR_EDL_MASK)
+ cf->len = can_fd_dlc2len((dlc & XCAN_DLCR_DLC_MASK) >>
+ XCAN_DLCR_DLC_SHIFT);
+ else
+ cf->len = can_cc_dlc2len((dlc & XCAN_DLCR_DLC_MASK) >>
+ XCAN_DLCR_DLC_SHIFT);
+
+ /* Change Xilinx CAN ID format to socketCAN ID format */
+ if (id_xcan & XCAN_IDR_IDE_MASK) {
+ /* The received frame is an Extended format frame */
+ cf->can_id = (id_xcan & XCAN_IDR_ID1_MASK) >> 3;
+ cf->can_id |= (id_xcan & XCAN_IDR_ID2_MASK) >>
+ XCAN_IDR_ID2_SHIFT;
+ cf->can_id |= CAN_EFF_FLAG;
+ if (id_xcan & XCAN_IDR_RTR_MASK)
+ cf->can_id |= CAN_RTR_FLAG;
+ } else {
+ /* The received frame is a standard format frame */
+ cf->can_id = (id_xcan & XCAN_IDR_ID1_MASK) >>
+ XCAN_IDR_ID1_SHIFT;
+ if (!(dlc & XCAN_DLCR_EDL_MASK) && (id_xcan &
+ XCAN_IDR_SRR_MASK))
+ cf->can_id |= CAN_RTR_FLAG;
+ }
+
+ /* Check the frame received is FD or not*/
+ if (dlc & XCAN_DLCR_EDL_MASK) {
+ for (i = 0; i < cf->len; i += 4) {
+ dw_offset = XCANFD_FRAME_DW_OFFSET(frame_base) +
+ (dwindex * XCANFD_DW_BYTES);
+ data[0] = priv->read_reg(priv, dw_offset);
+ *(__be32 *)(cf->data + i) = cpu_to_be32(data[0]);
+ dwindex++;
+ }
+ } else {
+ for (i = 0; i < cf->len; i += 4) {
+ dw_offset = XCANFD_FRAME_DW_OFFSET(frame_base);
+ data[0] = priv->read_reg(priv, dw_offset + i);
+ *(__be32 *)(cf->data + i) = cpu_to_be32(data[0]);
+ }
+ }
+
+ if (!(cf->can_id & CAN_RTR_FLAG))
+ stats->rx_bytes += cf->len;
+ stats->rx_packets++;
+
+ netif_receive_skb(skb);
+
+ return 1;
+}
+
+/**
+ * xcan_current_error_state - Get current error state from HW
+ * @ndev: Pointer to net_device structure
+ *
+ * Checks the current CAN error state from the HW. Note that this
+ * only checks for ERROR_PASSIVE and ERROR_WARNING.
+ *
+ * Return:
+ * ERROR_PASSIVE or ERROR_WARNING if either is active, ERROR_ACTIVE
+ * otherwise.
+ */
+static enum can_state xcan_current_error_state(struct net_device *ndev)
+{
+ struct xcan_priv *priv = netdev_priv(ndev);
+ u32 status = priv->read_reg(priv, XCAN_SR_OFFSET);
+
+ if ((status & XCAN_SR_ESTAT_MASK) == XCAN_SR_ESTAT_MASK)
+ return CAN_STATE_ERROR_PASSIVE;
+ else if (status & XCAN_SR_ERRWRN_MASK)
+ return CAN_STATE_ERROR_WARNING;
+ else
+ return CAN_STATE_ERROR_ACTIVE;
+}
+
+/**
+ * xcan_set_error_state - Set new CAN error state
+ * @ndev: Pointer to net_device structure
+ * @new_state: The new CAN state to be set
+ * @cf: Error frame to be populated or NULL
+ *
+ * Set new CAN error state for the device, updating statistics and
+ * populating the error frame if given.
+ */
+static void xcan_set_error_state(struct net_device *ndev,
+ enum can_state new_state,
+ struct can_frame *cf)
+{
+ struct xcan_priv *priv = netdev_priv(ndev);
+ u32 ecr = priv->read_reg(priv, XCAN_ECR_OFFSET);
+ u32 txerr = ecr & XCAN_ECR_TEC_MASK;
+ u32 rxerr = (ecr & XCAN_ECR_REC_MASK) >> XCAN_ESR_REC_SHIFT;
+ enum can_state tx_state = txerr >= rxerr ? new_state : 0;
+ enum can_state rx_state = txerr <= rxerr ? new_state : 0;
+
+ /* non-ERROR states are handled elsewhere */
+ if (WARN_ON(new_state > CAN_STATE_ERROR_PASSIVE))
+ return;
+
+ can_change_state(ndev, cf, tx_state, rx_state);
+
+ if (cf) {
+ cf->can_id |= CAN_ERR_CNT;
+ cf->data[6] = txerr;
+ cf->data[7] = rxerr;
+ }
+}
+
+/**
+ * xcan_update_error_state_after_rxtx - Update CAN error state after RX/TX
+ * @ndev: Pointer to net_device structure
+ *
+ * If the device is in a ERROR-WARNING or ERROR-PASSIVE state, check if
+ * the performed RX/TX has caused it to drop to a lesser state and set
+ * the interface state accordingly.
+ */
+static void xcan_update_error_state_after_rxtx(struct net_device *ndev)
+{
+ struct xcan_priv *priv = netdev_priv(ndev);
+ enum can_state old_state = priv->can.state;
+ enum can_state new_state;
+
+ /* changing error state due to successful frame RX/TX can only
+ * occur from these states
+ */
+ if (old_state != CAN_STATE_ERROR_WARNING &&
+ old_state != CAN_STATE_ERROR_PASSIVE)
+ return;
+
+ new_state = xcan_current_error_state(ndev);
+
+ if (new_state != old_state) {
+ struct sk_buff *skb;
+ struct can_frame *cf;
+
+ skb = alloc_can_err_skb(ndev, &cf);
+
+ xcan_set_error_state(ndev, new_state, skb ? cf : NULL);
+
+ if (skb)
+ netif_rx(skb);
+ }
+}
+
+/**
+ * xcan_err_interrupt - error frame Isr
+ * @ndev: net_device pointer
+ * @isr: interrupt status register value
+ *
+ * This is the CAN error interrupt and it will
+ * check the type of error and forward the error
+ * frame to upper layers.
+ */
+static void xcan_err_interrupt(struct net_device *ndev, u32 isr)
+{
+ struct xcan_priv *priv = netdev_priv(ndev);
+ struct net_device_stats *stats = &ndev->stats;
+ struct can_frame cf = { };
+ u32 err_status;
+
+ err_status = priv->read_reg(priv, XCAN_ESR_OFFSET);
+ priv->write_reg(priv, XCAN_ESR_OFFSET, err_status);
+
+ if (isr & XCAN_IXR_BSOFF_MASK) {
+ priv->can.state = CAN_STATE_BUS_OFF;
+ priv->can.can_stats.bus_off++;
+ /* Leave device in Config Mode in bus-off state */
+ priv->write_reg(priv, XCAN_SRR_OFFSET, XCAN_SRR_RESET_MASK);
+ can_bus_off(ndev);
+ cf.can_id |= CAN_ERR_BUSOFF;
+ } else {
+ enum can_state new_state = xcan_current_error_state(ndev);
+
+ if (new_state != priv->can.state)
+ xcan_set_error_state(ndev, new_state, &cf);
+ }
+
+ /* Check for Arbitration lost interrupt */
+ if (isr & XCAN_IXR_ARBLST_MASK) {
+ priv->can.can_stats.arbitration_lost++;
+ cf.can_id |= CAN_ERR_LOSTARB;
+ cf.data[0] = CAN_ERR_LOSTARB_UNSPEC;
+ }
+
+ /* Check for RX FIFO Overflow interrupt */
+ if (isr & XCAN_IXR_RXOFLW_MASK) {
+ stats->rx_over_errors++;
+ stats->rx_errors++;
+ cf.can_id |= CAN_ERR_CRTL;
+ cf.data[1] |= CAN_ERR_CRTL_RX_OVERFLOW;
+ }
+
+ /* Check for RX Match Not Finished interrupt */
+ if (isr & XCAN_IXR_RXMNF_MASK) {
+ stats->rx_dropped++;
+ stats->rx_errors++;
+ netdev_err(ndev, "RX match not finished, frame discarded\n");
+ cf.can_id |= CAN_ERR_CRTL;
+ cf.data[1] |= CAN_ERR_CRTL_UNSPEC;
+ }
+
+ /* Check for error interrupt */
+ if (isr & XCAN_IXR_ERROR_MASK) {
+ bool berr_reporting = false;
+
+ if (priv->can.ctrlmode & CAN_CTRLMODE_BERR_REPORTING) {
+ berr_reporting = true;
+ cf.can_id |= CAN_ERR_PROT | CAN_ERR_BUSERROR;
+ }
+
+ /* Check for Ack error interrupt */
+ if (err_status & XCAN_ESR_ACKER_MASK) {
+ stats->tx_errors++;
+ if (berr_reporting) {
+ cf.can_id |= CAN_ERR_ACK;
+ cf.data[3] = CAN_ERR_PROT_LOC_ACK;
+ }
+ }
+
+ /* Check for Bit error interrupt */
+ if (err_status & XCAN_ESR_BERR_MASK) {
+ stats->tx_errors++;
+ if (berr_reporting) {
+ cf.can_id |= CAN_ERR_PROT;
+ cf.data[2] = CAN_ERR_PROT_BIT;
+ }
+ }
+
+ /* Check for Stuff error interrupt */
+ if (err_status & XCAN_ESR_STER_MASK) {
+ stats->rx_errors++;
+ if (berr_reporting) {
+ cf.can_id |= CAN_ERR_PROT;
+ cf.data[2] = CAN_ERR_PROT_STUFF;
+ }
+ }
+
+ /* Check for Form error interrupt */
+ if (err_status & XCAN_ESR_FMER_MASK) {
+ stats->rx_errors++;
+ if (berr_reporting) {
+ cf.can_id |= CAN_ERR_PROT;
+ cf.data[2] = CAN_ERR_PROT_FORM;
+ }
+ }
+
+ /* Check for CRC error interrupt */
+ if (err_status & XCAN_ESR_CRCER_MASK) {
+ stats->rx_errors++;
+ if (berr_reporting) {
+ cf.can_id |= CAN_ERR_PROT;
+ cf.data[3] = CAN_ERR_PROT_LOC_CRC_SEQ;
+ }
+ }
+ priv->can.can_stats.bus_error++;
+ }
+
+ if (cf.can_id) {
+ struct can_frame *skb_cf;
+ struct sk_buff *skb = alloc_can_err_skb(ndev, &skb_cf);
+
+ if (skb) {
+ skb_cf->can_id |= cf.can_id;
+ memcpy(skb_cf->data, cf.data, CAN_ERR_DLC);
+ netif_rx(skb);
+ }
+ }
+
+ netdev_dbg(ndev, "%s: error status register:0x%x\n",
+ __func__, priv->read_reg(priv, XCAN_ESR_OFFSET));
+}
+
+/**
+ * xcan_state_interrupt - It will check the state of the CAN device
+ * @ndev: net_device pointer
+ * @isr: interrupt status register value
+ *
+ * This will checks the state of the CAN device
+ * and puts the device into appropriate state.
+ */
+static void xcan_state_interrupt(struct net_device *ndev, u32 isr)
+{
+ struct xcan_priv *priv = netdev_priv(ndev);
+
+ /* Check for Sleep interrupt if set put CAN device in sleep state */
+ if (isr & XCAN_IXR_SLP_MASK)
+ priv->can.state = CAN_STATE_SLEEPING;
+
+ /* Check for Wake up interrupt if set put CAN device in Active state */
+ if (isr & XCAN_IXR_WKUP_MASK)
+ priv->can.state = CAN_STATE_ERROR_ACTIVE;
+}
+
+/**
+ * xcan_rx_fifo_get_next_frame - Get register offset of next RX frame
+ * @priv: Driver private data structure
+ *
+ * Return: Register offset of the next frame in RX FIFO.
+ */
+static int xcan_rx_fifo_get_next_frame(struct xcan_priv *priv)
+{
+ int offset;
+
+ if (priv->devtype.flags & XCAN_FLAG_RX_FIFO_MULTI) {
+ u32 fsr, mask;
+
+ /* clear RXOK before the is-empty check so that any newly
+ * received frame will reassert it without a race
+ */
+ priv->write_reg(priv, XCAN_ICR_OFFSET, XCAN_IXR_RXOK_MASK);
+
+ fsr = priv->read_reg(priv, XCAN_FSR_OFFSET);
+
+ /* check if RX FIFO is empty */
+ if (priv->devtype.flags & XCAN_FLAG_CANFD_2)
+ mask = XCAN_2_FSR_FL_MASK;
+ else
+ mask = XCAN_FSR_FL_MASK;
+
+ if (!(fsr & mask))
+ return -ENOENT;
+
+ if (priv->devtype.flags & XCAN_FLAG_CANFD_2)
+ offset =
+ XCAN_RXMSG_2_FRAME_OFFSET(fsr & XCAN_2_FSR_RI_MASK);
+ else
+ offset =
+ XCAN_RXMSG_FRAME_OFFSET(fsr & XCAN_FSR_RI_MASK);
+
+ } else {
+ /* check if RX FIFO is empty */
+ if (!(priv->read_reg(priv, XCAN_ISR_OFFSET) &
+ XCAN_IXR_RXNEMP_MASK))
+ return -ENOENT;
+
+ /* frames are read from a static offset */
+ offset = XCAN_RXFIFO_OFFSET;
+ }
+
+ return offset;
+}
+
+/**
+ * xcan_rx_poll - Poll routine for rx packets (NAPI)
+ * @napi: napi structure pointer
+ * @quota: Max number of rx packets to be processed.
+ *
+ * This is the poll routine for rx part.
+ * It will process the packets maximux quota value.
+ *
+ * Return: number of packets received
+ */
+static int xcan_rx_poll(struct napi_struct *napi, int quota)
+{
+ struct net_device *ndev = napi->dev;
+ struct xcan_priv *priv = netdev_priv(ndev);
+ u32 ier;
+ int work_done = 0;
+ int frame_offset;
+
+ while ((frame_offset = xcan_rx_fifo_get_next_frame(priv)) >= 0 &&
+ (work_done < quota)) {
+ if (xcan_rx_int_mask(priv) & XCAN_IXR_RXOK_MASK)
+ work_done += xcanfd_rx(ndev, frame_offset);
+ else
+ work_done += xcan_rx(ndev, frame_offset);
+
+ if (priv->devtype.flags & XCAN_FLAG_RX_FIFO_MULTI)
+ /* increment read index */
+ priv->write_reg(priv, XCAN_FSR_OFFSET,
+ XCAN_FSR_IRI_MASK);
+ else
+ /* clear rx-not-empty (will actually clear only if
+ * empty)
+ */
+ priv->write_reg(priv, XCAN_ICR_OFFSET,
+ XCAN_IXR_RXNEMP_MASK);
+ }
+
+ if (work_done)
+ xcan_update_error_state_after_rxtx(ndev);
+
+ if (work_done < quota) {
+ if (napi_complete_done(napi, work_done)) {
+ ier = priv->read_reg(priv, XCAN_IER_OFFSET);
+ ier |= xcan_rx_int_mask(priv);
+ priv->write_reg(priv, XCAN_IER_OFFSET, ier);
+ }
+ }
+ return work_done;
+}
+
+/**
+ * xcan_tx_interrupt - Tx Done Isr
+ * @ndev: net_device pointer
+ * @isr: Interrupt status register value
+ */
+static void xcan_tx_interrupt(struct net_device *ndev, u32 isr)
+{
+ struct xcan_priv *priv = netdev_priv(ndev);
+ struct net_device_stats *stats = &ndev->stats;
+ unsigned int frames_in_fifo;
+ int frames_sent = 1; /* TXOK => at least 1 frame was sent */
+ unsigned long flags;
+ int retries = 0;
+
+ /* Synchronize with xmit as we need to know the exact number
+ * of frames in the FIFO to stay in sync due to the TXFEMP
+ * handling.
+ * This also prevents a race between netif_wake_queue() and
+ * netif_stop_queue().
+ */
+ spin_lock_irqsave(&priv->tx_lock, flags);
+
+ frames_in_fifo = priv->tx_head - priv->tx_tail;
+
+ if (WARN_ON_ONCE(frames_in_fifo == 0)) {
+ /* clear TXOK anyway to avoid getting back here */
+ priv->write_reg(priv, XCAN_ICR_OFFSET, XCAN_IXR_TXOK_MASK);
+ spin_unlock_irqrestore(&priv->tx_lock, flags);
+ return;
+ }
+
+ /* Check if 2 frames were sent (TXOK only means that at least 1
+ * frame was sent).
+ */
+ if (frames_in_fifo > 1) {
+ WARN_ON(frames_in_fifo > priv->tx_max);
+
+ /* Synchronize TXOK and isr so that after the loop:
+ * (1) isr variable is up-to-date at least up to TXOK clear
+ * time. This avoids us clearing a TXOK of a second frame
+ * but not noticing that the FIFO is now empty and thus
+ * marking only a single frame as sent.
+ * (2) No TXOK is left. Having one could mean leaving a
+ * stray TXOK as we might process the associated frame
+ * via TXFEMP handling as we read TXFEMP *after* TXOK
+ * clear to satisfy (1).
+ */
+ while ((isr & XCAN_IXR_TXOK_MASK) &&
+ !WARN_ON(++retries == 100)) {
+ priv->write_reg(priv, XCAN_ICR_OFFSET,
+ XCAN_IXR_TXOK_MASK);
+ isr = priv->read_reg(priv, XCAN_ISR_OFFSET);
+ }
+
+ if (isr & XCAN_IXR_TXFEMP_MASK) {
+ /* nothing in FIFO anymore */
+ frames_sent = frames_in_fifo;
+ }
+ } else {
+ /* single frame in fifo, just clear TXOK */
+ priv->write_reg(priv, XCAN_ICR_OFFSET, XCAN_IXR_TXOK_MASK);
+ }
+
+ while (frames_sent--) {
+ stats->tx_bytes += can_get_echo_skb(ndev, priv->tx_tail %
+ priv->tx_max, NULL);
+ priv->tx_tail++;
+ stats->tx_packets++;
+ }
+
+ netif_wake_queue(ndev);
+
+ spin_unlock_irqrestore(&priv->tx_lock, flags);
+
+ xcan_update_error_state_after_rxtx(ndev);
+}
+
+/**
+ * xcan_interrupt - CAN Isr
+ * @irq: irq number
+ * @dev_id: device id pointer
+ *
+ * This is the xilinx CAN Isr. It checks for the type of interrupt
+ * and invokes the corresponding ISR.
+ *
+ * Return:
+ * IRQ_NONE - If CAN device is in sleep mode, IRQ_HANDLED otherwise
+ */
+static irqreturn_t xcan_interrupt(int irq, void *dev_id)
+{
+ struct net_device *ndev = (struct net_device *)dev_id;
+ struct xcan_priv *priv = netdev_priv(ndev);
+ u32 isr, ier;
+ u32 isr_errors;
+ u32 rx_int_mask = xcan_rx_int_mask(priv);
+
+ /* Get the interrupt status from Xilinx CAN */
+ isr = priv->read_reg(priv, XCAN_ISR_OFFSET);
+ if (!isr)
+ return IRQ_NONE;
+
+ /* Check for the type of interrupt and Processing it */
+ if (isr & (XCAN_IXR_SLP_MASK | XCAN_IXR_WKUP_MASK)) {
+ priv->write_reg(priv, XCAN_ICR_OFFSET, (XCAN_IXR_SLP_MASK |
+ XCAN_IXR_WKUP_MASK));
+ xcan_state_interrupt(ndev, isr);
+ }
+
+ /* Check for Tx interrupt and Processing it */
+ if (isr & XCAN_IXR_TXOK_MASK)
+ xcan_tx_interrupt(ndev, isr);
+
+ /* Check for the type of error interrupt and Processing it */
+ isr_errors = isr & (XCAN_IXR_ERROR_MASK | XCAN_IXR_RXOFLW_MASK |
+ XCAN_IXR_BSOFF_MASK | XCAN_IXR_ARBLST_MASK |
+ XCAN_IXR_RXMNF_MASK);
+ if (isr_errors) {
+ priv->write_reg(priv, XCAN_ICR_OFFSET, isr_errors);
+ xcan_err_interrupt(ndev, isr);
+ }
+
+ /* Check for the type of receive interrupt and Processing it */
+ if (isr & rx_int_mask) {
+ ier = priv->read_reg(priv, XCAN_IER_OFFSET);
+ ier &= ~rx_int_mask;
+ priv->write_reg(priv, XCAN_IER_OFFSET, ier);
+ napi_schedule(&priv->napi);
+ }
+ return IRQ_HANDLED;
+}
+
+/**
+ * xcan_chip_stop - Driver stop routine
+ * @ndev: Pointer to net_device structure
+ *
+ * This is the drivers stop routine. It will disable the
+ * interrupts and put the device into configuration mode.
+ */
+static void xcan_chip_stop(struct net_device *ndev)
+{
+ struct xcan_priv *priv = netdev_priv(ndev);
+ int ret;
+
+ /* Disable interrupts and leave the can in configuration mode */
+ ret = set_reset_mode(ndev);
+ if (ret < 0)
+ netdev_dbg(ndev, "set_reset_mode() Failed\n");
+
+ priv->can.state = CAN_STATE_STOPPED;
+}
+
+/**
+ * xcan_open - Driver open routine
+ * @ndev: Pointer to net_device structure
+ *
+ * This is the driver open routine.
+ * Return: 0 on success and failure value on error
+ */
+static int xcan_open(struct net_device *ndev)
+{
+ struct xcan_priv *priv = netdev_priv(ndev);
+ int ret;
+
+ ret = phy_power_on(priv->transceiver);
+ if (ret)
+ return ret;
+
+ ret = pm_runtime_get_sync(priv->dev);
+ if (ret < 0) {
+ netdev_err(ndev, "%s: pm_runtime_get failed(%d)\n",
+ __func__, ret);
+ goto err;
+ }
+
+ ret = request_irq(ndev->irq, xcan_interrupt, priv->irq_flags,
+ ndev->name, ndev);
+ if (ret < 0) {
+ netdev_err(ndev, "irq allocation for CAN failed\n");
+ goto err;
+ }
+
+ /* Set chip into reset mode */
+ ret = set_reset_mode(ndev);
+ if (ret < 0) {
+ netdev_err(ndev, "mode resetting failed!\n");
+ goto err_irq;
+ }
+
+ /* Common open */
+ ret = open_candev(ndev);
+ if (ret)
+ goto err_irq;
+
+ ret = xcan_chip_start(ndev);
+ if (ret < 0) {
+ netdev_err(ndev, "xcan_chip_start failed!\n");
+ goto err_candev;
+ }
+
+ napi_enable(&priv->napi);
+ netif_start_queue(ndev);
+
+ return 0;
+
+err_candev:
+ close_candev(ndev);
+err_irq:
+ free_irq(ndev->irq, ndev);
+err:
+ pm_runtime_put(priv->dev);
+ phy_power_off(priv->transceiver);
+
+ return ret;
+}
+
+/**
+ * xcan_close - Driver close routine
+ * @ndev: Pointer to net_device structure
+ *
+ * Return: 0 always
+ */
+static int xcan_close(struct net_device *ndev)
+{
+ struct xcan_priv *priv = netdev_priv(ndev);
+
+ netif_stop_queue(ndev);
+ napi_disable(&priv->napi);
+ xcan_chip_stop(ndev);
+ free_irq(ndev->irq, ndev);
+ close_candev(ndev);
+
+ pm_runtime_put(priv->dev);
+ phy_power_off(priv->transceiver);
+
+ return 0;
+}
+
+/**
+ * xcan_get_berr_counter - error counter routine
+ * @ndev: Pointer to net_device structure
+ * @bec: Pointer to can_berr_counter structure
+ *
+ * This is the driver error counter routine.
+ * Return: 0 on success and failure value on error
+ */
+static int xcan_get_berr_counter(const struct net_device *ndev,
+ struct can_berr_counter *bec)
+{
+ struct xcan_priv *priv = netdev_priv(ndev);
+ int ret;
+
+ ret = pm_runtime_get_sync(priv->dev);
+ if (ret < 0) {
+ netdev_err(ndev, "%s: pm_runtime_get failed(%d)\n",
+ __func__, ret);
+ pm_runtime_put(priv->dev);
+ return ret;
+ }
+
+ bec->txerr = priv->read_reg(priv, XCAN_ECR_OFFSET) & XCAN_ECR_TEC_MASK;
+ bec->rxerr = ((priv->read_reg(priv, XCAN_ECR_OFFSET) &
+ XCAN_ECR_REC_MASK) >> XCAN_ESR_REC_SHIFT);
+
+ pm_runtime_put(priv->dev);
+
+ return 0;
+}
+
+/**
+ * xcan_get_auto_tdcv - Get Transmitter Delay Compensation Value
+ * @ndev: Pointer to net_device structure
+ * @tdcv: Pointer to TDCV value
+ *
+ * Return: 0 on success
+ */
+static int xcan_get_auto_tdcv(const struct net_device *ndev, u32 *tdcv)
+{
+ struct xcan_priv *priv = netdev_priv(ndev);
+
+ *tdcv = FIELD_GET(XCAN_SR_TDCV_MASK, priv->read_reg(priv, XCAN_SR_OFFSET));
+
+ return 0;
+}
+
+static const struct net_device_ops xcan_netdev_ops = {
+ .ndo_open = xcan_open,
+ .ndo_stop = xcan_close,
+ .ndo_start_xmit = xcan_start_xmit,
+ .ndo_change_mtu = can_change_mtu,
+};
+
+static const struct ethtool_ops xcan_ethtool_ops = {
+ .get_ts_info = ethtool_op_get_ts_info,
+};
+
+/**
+ * xcan_suspend - Suspend method for the driver
+ * @dev: Address of the device structure
+ *
+ * Put the driver into low power mode.
+ * Return: 0 on success and failure value on error
+ */
+static int __maybe_unused xcan_suspend(struct device *dev)
+{
+ struct net_device *ndev = dev_get_drvdata(dev);
+
+ if (netif_running(ndev)) {
+ netif_stop_queue(ndev);
+ netif_device_detach(ndev);
+ xcan_chip_stop(ndev);
+ }
+
+ return pm_runtime_force_suspend(dev);
+}
+
+/**
+ * xcan_resume - Resume from suspend
+ * @dev: Address of the device structure
+ *
+ * Resume operation after suspend.
+ * Return: 0 on success and failure value on error
+ */
+static int __maybe_unused xcan_resume(struct device *dev)
+{
+ struct net_device *ndev = dev_get_drvdata(dev);
+ int ret;
+
+ ret = pm_runtime_force_resume(dev);
+ if (ret) {
+ dev_err(dev, "pm_runtime_force_resume failed on resume\n");
+ return ret;
+ }
+
+ if (netif_running(ndev)) {
+ ret = xcan_chip_start(ndev);
+ if (ret) {
+ dev_err(dev, "xcan_chip_start failed on resume\n");
+ return ret;
+ }
+
+ netif_device_attach(ndev);
+ netif_start_queue(ndev);
+ }
+
+ return 0;
+}
+
+/**
+ * xcan_runtime_suspend - Runtime suspend method for the driver
+ * @dev: Address of the device structure
+ *
+ * Put the driver into low power mode.
+ * Return: 0 always
+ */
+static int __maybe_unused xcan_runtime_suspend(struct device *dev)
+{
+ struct net_device *ndev = dev_get_drvdata(dev);
+ struct xcan_priv *priv = netdev_priv(ndev);
+
+ clk_disable_unprepare(priv->bus_clk);
+ clk_disable_unprepare(priv->can_clk);
+
+ return 0;
+}
+
+/**
+ * xcan_runtime_resume - Runtime resume from suspend
+ * @dev: Address of the device structure
+ *
+ * Resume operation after suspend.
+ * Return: 0 on success and failure value on error
+ */
+static int __maybe_unused xcan_runtime_resume(struct device *dev)
+{
+ struct net_device *ndev = dev_get_drvdata(dev);
+ struct xcan_priv *priv = netdev_priv(ndev);
+ int ret;
+
+ ret = clk_prepare_enable(priv->bus_clk);
+ if (ret) {
+ dev_err(dev, "Cannot enable clock.\n");
+ return ret;
+ }
+ ret = clk_prepare_enable(priv->can_clk);
+ if (ret) {
+ dev_err(dev, "Cannot enable clock.\n");
+ clk_disable_unprepare(priv->bus_clk);
+ return ret;
+ }
+
+ return 0;
+}
+
+static const struct dev_pm_ops xcan_dev_pm_ops = {
+ SET_SYSTEM_SLEEP_PM_OPS(xcan_suspend, xcan_resume)
+ SET_RUNTIME_PM_OPS(xcan_runtime_suspend, xcan_runtime_resume, NULL)
+};
+
+static const struct xcan_devtype_data xcan_zynq_data = {
+ .cantype = XZYNQ_CANPS,
+ .flags = XCAN_FLAG_TXFEMP,
+ .bittiming_const = &xcan_bittiming_const,
+ .btr_ts2_shift = XCAN_BTR_TS2_SHIFT,
+ .btr_sjw_shift = XCAN_BTR_SJW_SHIFT,
+ .bus_clk_name = "pclk",
+};
+
+static const struct xcan_devtype_data xcan_axi_data = {
+ .cantype = XAXI_CAN,
+ .bittiming_const = &xcan_bittiming_const,
+ .btr_ts2_shift = XCAN_BTR_TS2_SHIFT,
+ .btr_sjw_shift = XCAN_BTR_SJW_SHIFT,
+ .bus_clk_name = "s_axi_aclk",
+};
+
+static const struct xcan_devtype_data xcan_canfd_data = {
+ .cantype = XAXI_CANFD,
+ .flags = XCAN_FLAG_EXT_FILTERS |
+ XCAN_FLAG_RXMNF |
+ XCAN_FLAG_TX_MAILBOXES |
+ XCAN_FLAG_RX_FIFO_MULTI,
+ .bittiming_const = &xcan_bittiming_const_canfd,
+ .btr_ts2_shift = XCAN_BTR_TS2_SHIFT_CANFD,
+ .btr_sjw_shift = XCAN_BTR_SJW_SHIFT_CANFD,
+ .bus_clk_name = "s_axi_aclk",
+};
+
+static const struct xcan_devtype_data xcan_canfd2_data = {
+ .cantype = XAXI_CANFD_2_0,
+ .flags = XCAN_FLAG_EXT_FILTERS |
+ XCAN_FLAG_RXMNF |
+ XCAN_FLAG_TX_MAILBOXES |
+ XCAN_FLAG_CANFD_2 |
+ XCAN_FLAG_RX_FIFO_MULTI,
+ .bittiming_const = &xcan_bittiming_const_canfd2,
+ .btr_ts2_shift = XCAN_BTR_TS2_SHIFT_CANFD,
+ .btr_sjw_shift = XCAN_BTR_SJW_SHIFT_CANFD,
+ .bus_clk_name = "s_axi_aclk",
+};
+
+/* Match table for OF platform binding */
+static const struct of_device_id xcan_of_match[] = {
+ { .compatible = "xlnx,zynq-can-1.0", .data = &xcan_zynq_data },
+ { .compatible = "xlnx,axi-can-1.00.a", .data = &xcan_axi_data },
+ { .compatible = "xlnx,canfd-1.0", .data = &xcan_canfd_data },
+ { .compatible = "xlnx,canfd-2.0", .data = &xcan_canfd2_data },
+ { /* end of list */ },
+};
+MODULE_DEVICE_TABLE(of, xcan_of_match);
+
+/**
+ * xcan_probe - Platform registration call
+ * @pdev: Handle to the platform device structure
+ *
+ * This function does all the memory allocation and registration for the CAN
+ * device.
+ *
+ * Return: 0 on success and failure value on error
+ */
+static int xcan_probe(struct platform_device *pdev)
+{
+ struct net_device *ndev;
+ struct xcan_priv *priv;
+ struct phy *transceiver;
+ const struct of_device_id *of_id;
+ const struct xcan_devtype_data *devtype = &xcan_axi_data;
+ void __iomem *addr;
+ int ret;
+ int rx_max, tx_max;
+ u32 hw_tx_max = 0, hw_rx_max = 0;
+ const char *hw_tx_max_property;
+
+ /* Get the virtual base address for the device */
+ addr = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(addr)) {
+ ret = PTR_ERR(addr);
+ goto err;
+ }
+
+ of_id = of_match_device(xcan_of_match, &pdev->dev);
+ if (of_id && of_id->data)
+ devtype = of_id->data;
+
+ hw_tx_max_property = devtype->flags & XCAN_FLAG_TX_MAILBOXES ?
+ "tx-mailbox-count" : "tx-fifo-depth";
+
+ ret = of_property_read_u32(pdev->dev.of_node, hw_tx_max_property,
+ &hw_tx_max);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "missing %s property\n",
+ hw_tx_max_property);
+ goto err;
+ }
+
+ ret = of_property_read_u32(pdev->dev.of_node, "rx-fifo-depth",
+ &hw_rx_max);
+ if (ret < 0) {
+ dev_err(&pdev->dev,
+ "missing rx-fifo-depth property (mailbox mode is not supported)\n");
+ goto err;
+ }
+
+ /* With TX FIFO:
+ *
+ * There is no way to directly figure out how many frames have been
+ * sent when the TXOK interrupt is processed. If TXFEMP
+ * is supported, we can have 2 frames in the FIFO and use TXFEMP
+ * to determine if 1 or 2 frames have been sent.
+ * Theoretically we should be able to use TXFWMEMP to determine up
+ * to 3 frames, but it seems that after putting a second frame in the
+ * FIFO, with watermark at 2 frames, it can happen that TXFWMEMP (less
+ * than 2 frames in FIFO) is set anyway with no TXOK (a frame was
+ * sent), which is not a sensible state - possibly TXFWMEMP is not
+ * completely synchronized with the rest of the bits?
+ *
+ * With TX mailboxes:
+ *
+ * HW sends frames in CAN ID priority order. To preserve FIFO ordering
+ * we submit frames one at a time.
+ */
+ if (!(devtype->flags & XCAN_FLAG_TX_MAILBOXES) &&
+ (devtype->flags & XCAN_FLAG_TXFEMP))
+ tx_max = min(hw_tx_max, 2U);
+ else
+ tx_max = 1;
+
+ rx_max = hw_rx_max;
+
+ /* Create a CAN device instance */
+ ndev = alloc_candev(sizeof(struct xcan_priv), tx_max);
+ if (!ndev)
+ return -ENOMEM;
+
+ priv = netdev_priv(ndev);
+ priv->dev = &pdev->dev;
+ priv->can.bittiming_const = devtype->bittiming_const;
+ priv->can.do_set_mode = xcan_do_set_mode;
+ priv->can.do_get_berr_counter = xcan_get_berr_counter;
+ priv->can.ctrlmode_supported = CAN_CTRLMODE_LOOPBACK |
+ CAN_CTRLMODE_BERR_REPORTING;
+ priv->rstc = devm_reset_control_get_optional_exclusive(&pdev->dev, NULL);
+ if (IS_ERR(priv->rstc)) {
+ dev_err(&pdev->dev, "Cannot get CAN reset.\n");
+ ret = PTR_ERR(priv->rstc);
+ goto err_free;
+ }
+
+ ret = reset_control_reset(priv->rstc);
+ if (ret)
+ goto err_free;
+
+ if (devtype->cantype == XAXI_CANFD) {
+ priv->can.data_bittiming_const =
+ &xcan_data_bittiming_const_canfd;
+ priv->can.tdc_const = &xcan_tdc_const_canfd;
+ }
+
+ if (devtype->cantype == XAXI_CANFD_2_0) {
+ priv->can.data_bittiming_const =
+ &xcan_data_bittiming_const_canfd2;
+ priv->can.tdc_const = &xcan_tdc_const_canfd2;
+ }
+
+ if (devtype->cantype == XAXI_CANFD ||
+ devtype->cantype == XAXI_CANFD_2_0) {
+ priv->can.ctrlmode_supported |= CAN_CTRLMODE_FD |
+ CAN_CTRLMODE_TDC_AUTO;
+ priv->can.do_get_auto_tdcv = xcan_get_auto_tdcv;
+ }
+
+ priv->reg_base = addr;
+ priv->tx_max = tx_max;
+ priv->devtype = *devtype;
+ spin_lock_init(&priv->tx_lock);
+
+ /* Get IRQ for the device */
+ ret = platform_get_irq(pdev, 0);
+ if (ret < 0)
+ goto err_reset;
+
+ ndev->irq = ret;
+
+ ndev->flags |= IFF_ECHO; /* We support local echo */
+
+ platform_set_drvdata(pdev, ndev);
+ SET_NETDEV_DEV(ndev, &pdev->dev);
+ ndev->netdev_ops = &xcan_netdev_ops;
+ ndev->ethtool_ops = &xcan_ethtool_ops;
+
+ /* Getting the CAN can_clk info */
+ priv->can_clk = devm_clk_get(&pdev->dev, "can_clk");
+ if (IS_ERR(priv->can_clk)) {
+ ret = dev_err_probe(&pdev->dev, PTR_ERR(priv->can_clk),
+ "device clock not found\n");
+ goto err_reset;
+ }
+
+ priv->bus_clk = devm_clk_get(&pdev->dev, devtype->bus_clk_name);
+ if (IS_ERR(priv->bus_clk)) {
+ ret = dev_err_probe(&pdev->dev, PTR_ERR(priv->bus_clk),
+ "bus clock not found\n");
+ goto err_reset;
+ }
+
+ transceiver = devm_phy_optional_get(&pdev->dev, NULL);
+ if (IS_ERR(transceiver)) {
+ ret = PTR_ERR(transceiver);
+ dev_err_probe(&pdev->dev, ret, "failed to get phy\n");
+ goto err_reset;
+ }
+ priv->transceiver = transceiver;
+
+ priv->write_reg = xcan_write_reg_le;
+ priv->read_reg = xcan_read_reg_le;
+
+ pm_runtime_enable(&pdev->dev);
+ ret = pm_runtime_get_sync(&pdev->dev);
+ if (ret < 0) {
+ netdev_err(ndev, "%s: pm_runtime_get failed(%d)\n",
+ __func__, ret);
+ goto err_disableclks;
+ }
+
+ if (priv->read_reg(priv, XCAN_SR_OFFSET) != XCAN_SR_CONFIG_MASK) {
+ priv->write_reg = xcan_write_reg_be;
+ priv->read_reg = xcan_read_reg_be;
+ }
+
+ priv->can.clock.freq = clk_get_rate(priv->can_clk);
+
+ netif_napi_add_weight(ndev, &priv->napi, xcan_rx_poll, rx_max);
+
+ ret = register_candev(ndev);
+ if (ret) {
+ dev_err(&pdev->dev, "fail to register failed (err=%d)\n", ret);
+ goto err_disableclks;
+ }
+
+ of_can_transceiver(ndev);
+ pm_runtime_put(&pdev->dev);
+
+ if (priv->devtype.flags & XCAN_FLAG_CANFD_2) {
+ priv->write_reg(priv, XCAN_AFR_2_ID_OFFSET, 0x00000000);
+ priv->write_reg(priv, XCAN_AFR_2_MASK_OFFSET, 0x00000000);
+ }
+
+ netdev_dbg(ndev, "reg_base=0x%p irq=%d clock=%d, tx buffers: actual %d, using %d\n",
+ priv->reg_base, ndev->irq, priv->can.clock.freq,
+ hw_tx_max, priv->tx_max);
+
+ return 0;
+
+err_disableclks:
+ pm_runtime_put(priv->dev);
+ pm_runtime_disable(&pdev->dev);
+err_reset:
+ reset_control_assert(priv->rstc);
+err_free:
+ free_candev(ndev);
+err:
+ return ret;
+}
+
+/**
+ * xcan_remove - Unregister the device after releasing the resources
+ * @pdev: Handle to the platform device structure
+ *
+ * This function frees all the resources allocated to the device.
+ * Return: 0 always
+ */
+static void xcan_remove(struct platform_device *pdev)
+{
+ struct net_device *ndev = platform_get_drvdata(pdev);
+ struct xcan_priv *priv = netdev_priv(ndev);
+
+ unregister_candev(ndev);
+ pm_runtime_disable(&pdev->dev);
+ reset_control_assert(priv->rstc);
+ free_candev(ndev);
+}
+
+static struct platform_driver xcan_driver = {
+ .probe = xcan_probe,
+ .remove_new = xcan_remove,
+ .driver = {
+ .name = DRIVER_NAME,
+ .pm = &xcan_dev_pm_ops,
+ .of_match_table = xcan_of_match,
+ },
+};
+
+module_platform_driver(xcan_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Xilinx Inc");
+MODULE_DESCRIPTION("Xilinx CAN interface");