diff options
Diffstat (limited to 'drivers/net/dsa/Kconfig')
| -rw-r--r-- | drivers/net/dsa/Kconfig | 153 |
1 files changed, 153 insertions, 0 deletions
diff --git a/drivers/net/dsa/Kconfig b/drivers/net/dsa/Kconfig new file mode 100644 index 0000000000..f8c1d73b25 --- /dev/null +++ b/drivers/net/dsa/Kconfig @@ -0,0 +1,153 @@ +# SPDX-License-Identifier: GPL-2.0-only +menu "Distributed Switch Architecture drivers" + depends on NET_DSA + +source "drivers/net/dsa/b53/Kconfig" + +config NET_DSA_BCM_SF2 + tristate "Broadcom Starfighter 2 Ethernet switch support" + depends on HAS_IOMEM + select NET_DSA_TAG_BRCM + select FIXED_PHY + select BCM7XXX_PHY + select MDIO_BCM_UNIMAC + select B53 + help + This enables support for the Broadcom Starfighter 2 Ethernet + switch chips. + +config NET_DSA_LOOP + tristate "DSA mock-up Ethernet switch chip support" + select NET_DSA_TAG_NONE + select FIXED_PHY + help + This enables support for a fake mock-up switch chip which + exercises the DSA APIs. + +source "drivers/net/dsa/hirschmann/Kconfig" + +config NET_DSA_LANTIQ_GSWIP + tristate "Lantiq / Intel GSWIP" + depends on HAS_IOMEM + select NET_DSA_TAG_GSWIP + help + This enables support for the Lantiq / Intel GSWIP 2.1 found in + the xrx200 / VR9 SoC. + +config NET_DSA_MT7530 + tristate "MediaTek MT7530 and MT7531 Ethernet switch support" + select NET_DSA_TAG_MTK + imply NET_DSA_MT7530_MDIO + imply NET_DSA_MT7530_MMIO + help + This enables support for the MediaTek MT7530 and MT7531 Ethernet + switch chips. Multi-chip module MT7530 in MT7621AT, MT7621DAT, + MT7621ST and MT7623AI SoCs, and built-in switch in MT7988 SoC are + supported as well. + +config NET_DSA_MT7530_MDIO + tristate "MediaTek MT7530 MDIO interface driver" + depends on NET_DSA_MT7530 + imply MEDIATEK_GE_PHY + select PCS_MTK_LYNXI + help + This enables support for the MediaTek MT7530 and MT7531 switch + chips which are connected via MDIO, as well as multi-chip + module MT7530 which can be found in the MT7621AT, MT7621DAT, + MT7621ST and MT7623AI SoCs. + +config NET_DSA_MT7530_MMIO + tristate "MediaTek MT7530 MMIO interface driver" + depends on NET_DSA_MT7530 + depends on HAS_IOMEM + imply MEDIATEK_GE_SOC_PHY + help + This enables support for the built-in Ethernet switch found + in the MediaTek MT7988 SoC. + The switch is a similar design as MT7531, but the switch registers + are directly mapped into the SoCs register space rather than being + accessible via MDIO. + +config NET_DSA_MV88E6060 + tristate "Marvell 88E6060 ethernet switch chip support" + select NET_DSA_TAG_TRAILER + help + This enables support for the Marvell 88E6060 ethernet switch + chip. + +source "drivers/net/dsa/microchip/Kconfig" + +source "drivers/net/dsa/mv88e6xxx/Kconfig" + +source "drivers/net/dsa/ocelot/Kconfig" + +source "drivers/net/dsa/qca/Kconfig" + +source "drivers/net/dsa/sja1105/Kconfig" + +source "drivers/net/dsa/xrs700x/Kconfig" + +source "drivers/net/dsa/realtek/Kconfig" + +config NET_DSA_RZN1_A5PSW + tristate "Renesas RZ/N1 A5PSW Ethernet switch support" + depends on OF && ARCH_RZN1 + select NET_DSA_TAG_RZN1_A5PSW + select PCS_RZN1_MIIC + help + This driver supports the A5PSW switch, which is embedded in Renesas + RZ/N1 SoC. + +config NET_DSA_SMSC_LAN9303 + tristate + select NET_DSA_TAG_LAN9303 + select REGMAP + help + This enables support for the Microchip LAN9303/LAN9354 3 port ethernet + switch chips. + +config NET_DSA_SMSC_LAN9303_I2C + tristate "SMSC/Microchip LAN9303 3-ports 10/100 ethernet switch in I2C managed mode" + depends on I2C + depends on VLAN_8021Q || VLAN_8021Q=n + select NET_DSA_SMSC_LAN9303 + select REGMAP_I2C + help + Enable access functions if the SMSC/Microchip LAN9303 is configured + for I2C managed mode. + +config NET_DSA_SMSC_LAN9303_MDIO + tristate "Microchip LAN9303/LAN9354 3-ports 10/100 ethernet switch in MDIO managed mode" + select NET_DSA_SMSC_LAN9303 + depends on VLAN_8021Q || VLAN_8021Q=n + help + Enable access functions if the Microchip LAN9303/LAN9354 is configured + for MDIO managed mode. + +config NET_DSA_VITESSE_VSC73XX + tristate + select NET_DSA_TAG_NONE + select FIXED_PHY + select VITESSE_PHY + select GPIOLIB + help + This enables support for the Vitesse VSC7385, VSC7388, + VSC7395 and VSC7398 SparX integrated ethernet switches. + +config NET_DSA_VITESSE_VSC73XX_SPI + tristate "Vitesse VSC7385/7388/7395/7398 SPI mode support" + depends on SPI + select NET_DSA_VITESSE_VSC73XX + help + This enables support for the Vitesse VSC7385, VSC7388, VSC7395 + and VSC7398 SparX integrated ethernet switches in SPI managed mode. + +config NET_DSA_VITESSE_VSC73XX_PLATFORM + tristate "Vitesse VSC7385/7388/7395/7398 Platform mode support" + depends on HAS_IOMEM + select NET_DSA_VITESSE_VSC73XX + help + This enables support for the Vitesse VSC7385, VSC7388, VSC7395 + and VSC7398 SparX integrated ethernet switches, connected over + a CPU-attached address bus and work in memory-mapped I/O mode. +endmenu |