diff options
Diffstat (limited to 'drivers/net/dsa/b53/b53_common.c')
| -rw-r--r-- | drivers/net/dsa/b53/b53_common.c | 2846 |
1 files changed, 2846 insertions, 0 deletions
diff --git a/drivers/net/dsa/b53/b53_common.c b/drivers/net/dsa/b53/b53_common.c new file mode 100644 index 0000000000..4e27dc913c --- /dev/null +++ b/drivers/net/dsa/b53/b53_common.c @@ -0,0 +1,2846 @@ +/* + * B53 switch driver main logic + * + * Copyright (C) 2011-2013 Jonas Gorski <jogo@openwrt.org> + * Copyright (C) 2016 Florian Fainelli <f.fainelli@gmail.com> + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ + +#include <linux/delay.h> +#include <linux/export.h> +#include <linux/gpio.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/platform_data/b53.h> +#include <linux/phy.h> +#include <linux/phylink.h> +#include <linux/etherdevice.h> +#include <linux/if_bridge.h> +#include <net/dsa.h> + +#include "b53_regs.h" +#include "b53_priv.h" + +struct b53_mib_desc { + u8 size; + u8 offset; + const char *name; +}; + +/* BCM5365 MIB counters */ +static const struct b53_mib_desc b53_mibs_65[] = { + { 8, 0x00, "TxOctets" }, + { 4, 0x08, "TxDropPkts" }, + { 4, 0x10, "TxBroadcastPkts" }, + { 4, 0x14, "TxMulticastPkts" }, + { 4, 0x18, "TxUnicastPkts" }, + { 4, 0x1c, "TxCollisions" }, + { 4, 0x20, "TxSingleCollision" }, + { 4, 0x24, "TxMultipleCollision" }, + { 4, 0x28, "TxDeferredTransmit" }, + { 4, 0x2c, "TxLateCollision" }, + { 4, 0x30, "TxExcessiveCollision" }, + { 4, 0x38, "TxPausePkts" }, + { 8, 0x44, "RxOctets" }, + { 4, 0x4c, "RxUndersizePkts" }, + { 4, 0x50, "RxPausePkts" }, + { 4, 0x54, "Pkts64Octets" }, + { 4, 0x58, "Pkts65to127Octets" }, + { 4, 0x5c, "Pkts128to255Octets" }, + { 4, 0x60, "Pkts256to511Octets" }, + { 4, 0x64, "Pkts512to1023Octets" }, + { 4, 0x68, "Pkts1024to1522Octets" }, + { 4, 0x6c, "RxOversizePkts" }, + { 4, 0x70, "RxJabbers" }, + { 4, 0x74, "RxAlignmentErrors" }, + { 4, 0x78, "RxFCSErrors" }, + { 8, 0x7c, "RxGoodOctets" }, + { 4, 0x84, "RxDropPkts" }, + { 4, 0x88, "RxUnicastPkts" }, + { 4, 0x8c, "RxMulticastPkts" }, + { 4, 0x90, "RxBroadcastPkts" }, + { 4, 0x94, "RxSAChanges" }, + { 4, 0x98, "RxFragments" }, +}; + +#define B53_MIBS_65_SIZE ARRAY_SIZE(b53_mibs_65) + +/* BCM63xx MIB counters */ +static const struct b53_mib_desc b53_mibs_63xx[] = { + { 8, 0x00, "TxOctets" }, + { 4, 0x08, "TxDropPkts" }, + { 4, 0x0c, "TxQoSPkts" }, + { 4, 0x10, "TxBroadcastPkts" }, + { 4, 0x14, "TxMulticastPkts" }, + { 4, 0x18, "TxUnicastPkts" }, + { 4, 0x1c, "TxCollisions" }, + { 4, 0x20, "TxSingleCollision" }, + { 4, 0x24, "TxMultipleCollision" }, + { 4, 0x28, "TxDeferredTransmit" }, + { 4, 0x2c, "TxLateCollision" }, + { 4, 0x30, "TxExcessiveCollision" }, + { 4, 0x38, "TxPausePkts" }, + { 8, 0x3c, "TxQoSOctets" }, + { 8, 0x44, "RxOctets" }, + { 4, 0x4c, "RxUndersizePkts" }, + { 4, 0x50, "RxPausePkts" }, + { 4, 0x54, "Pkts64Octets" }, + { 4, 0x58, "Pkts65to127Octets" }, + { 4, 0x5c, "Pkts128to255Octets" }, + { 4, 0x60, "Pkts256to511Octets" }, + { 4, 0x64, "Pkts512to1023Octets" }, + { 4, 0x68, "Pkts1024to1522Octets" }, + { 4, 0x6c, "RxOversizePkts" }, + { 4, 0x70, "RxJabbers" }, + { 4, 0x74, "RxAlignmentErrors" }, + { 4, 0x78, "RxFCSErrors" }, + { 8, 0x7c, "RxGoodOctets" }, + { 4, 0x84, "RxDropPkts" }, + { 4, 0x88, "RxUnicastPkts" }, + { 4, 0x8c, "RxMulticastPkts" }, + { 4, 0x90, "RxBroadcastPkts" }, + { 4, 0x94, "RxSAChanges" }, + { 4, 0x98, "RxFragments" }, + { 4, 0xa0, "RxSymbolErrors" }, + { 4, 0xa4, "RxQoSPkts" }, + { 8, 0xa8, "RxQoSOctets" }, + { 4, 0xb0, "Pkts1523to2047Octets" }, + { 4, 0xb4, "Pkts2048to4095Octets" }, + { 4, 0xb8, "Pkts4096to8191Octets" }, + { 4, 0xbc, "Pkts8192to9728Octets" }, + { 4, 0xc0, "RxDiscarded" }, +}; + +#define B53_MIBS_63XX_SIZE ARRAY_SIZE(b53_mibs_63xx) + +/* MIB counters */ +static const struct b53_mib_desc b53_mibs[] = { + { 8, 0x00, "TxOctets" }, + { 4, 0x08, "TxDropPkts" }, + { 4, 0x10, "TxBroadcastPkts" }, + { 4, 0x14, "TxMulticastPkts" }, + { 4, 0x18, "TxUnicastPkts" }, + { 4, 0x1c, "TxCollisions" }, + { 4, 0x20, "TxSingleCollision" }, + { 4, 0x24, "TxMultipleCollision" }, + { 4, 0x28, "TxDeferredTransmit" }, + { 4, 0x2c, "TxLateCollision" }, + { 4, 0x30, "TxExcessiveCollision" }, + { 4, 0x38, "TxPausePkts" }, + { 8, 0x50, "RxOctets" }, + { 4, 0x58, "RxUndersizePkts" }, + { 4, 0x5c, "RxPausePkts" }, + { 4, 0x60, "Pkts64Octets" }, + { 4, 0x64, "Pkts65to127Octets" }, + { 4, 0x68, "Pkts128to255Octets" }, + { 4, 0x6c, "Pkts256to511Octets" }, + { 4, 0x70, "Pkts512to1023Octets" }, + { 4, 0x74, "Pkts1024to1522Octets" }, + { 4, 0x78, "RxOversizePkts" }, + { 4, 0x7c, "RxJabbers" }, + { 4, 0x80, "RxAlignmentErrors" }, + { 4, 0x84, "RxFCSErrors" }, + { 8, 0x88, "RxGoodOctets" }, + { 4, 0x90, "RxDropPkts" }, + { 4, 0x94, "RxUnicastPkts" }, + { 4, 0x98, "RxMulticastPkts" }, + { 4, 0x9c, "RxBroadcastPkts" }, + { 4, 0xa0, "RxSAChanges" }, + { 4, 0xa4, "RxFragments" }, + { 4, 0xa8, "RxJumboPkts" }, + { 4, 0xac, "RxSymbolErrors" }, + { 4, 0xc0, "RxDiscarded" }, +}; + +#define B53_MIBS_SIZE ARRAY_SIZE(b53_mibs) + +static const struct b53_mib_desc b53_mibs_58xx[] = { + { 8, 0x00, "TxOctets" }, + { 4, 0x08, "TxDropPkts" }, + { 4, 0x0c, "TxQPKTQ0" }, + { 4, 0x10, "TxBroadcastPkts" }, + { 4, 0x14, "TxMulticastPkts" }, + { 4, 0x18, "TxUnicastPKts" }, + { 4, 0x1c, "TxCollisions" }, + { 4, 0x20, "TxSingleCollision" }, + { 4, 0x24, "TxMultipleCollision" }, + { 4, 0x28, "TxDeferredCollision" }, + { 4, 0x2c, "TxLateCollision" }, + { 4, 0x30, "TxExcessiveCollision" }, + { 4, 0x34, "TxFrameInDisc" }, + { 4, 0x38, "TxPausePkts" }, + { 4, 0x3c, "TxQPKTQ1" }, + { 4, 0x40, "TxQPKTQ2" }, + { 4, 0x44, "TxQPKTQ3" }, + { 4, 0x48, "TxQPKTQ4" }, + { 4, 0x4c, "TxQPKTQ5" }, + { 8, 0x50, "RxOctets" }, + { 4, 0x58, "RxUndersizePkts" }, + { 4, 0x5c, "RxPausePkts" }, + { 4, 0x60, "RxPkts64Octets" }, + { 4, 0x64, "RxPkts65to127Octets" }, + { 4, 0x68, "RxPkts128to255Octets" }, + { 4, 0x6c, "RxPkts256to511Octets" }, + { 4, 0x70, "RxPkts512to1023Octets" }, + { 4, 0x74, "RxPkts1024toMaxPktsOctets" }, + { 4, 0x78, "RxOversizePkts" }, + { 4, 0x7c, "RxJabbers" }, + { 4, 0x80, "RxAlignmentErrors" }, + { 4, 0x84, "RxFCSErrors" }, + { 8, 0x88, "RxGoodOctets" }, + { 4, 0x90, "RxDropPkts" }, + { 4, 0x94, "RxUnicastPkts" }, + { 4, 0x98, "RxMulticastPkts" }, + { 4, 0x9c, "RxBroadcastPkts" }, + { 4, 0xa0, "RxSAChanges" }, + { 4, 0xa4, "RxFragments" }, + { 4, 0xa8, "RxJumboPkt" }, + { 4, 0xac, "RxSymblErr" }, + { 4, 0xb0, "InRangeErrCount" }, + { 4, 0xb4, "OutRangeErrCount" }, + { 4, 0xb8, "EEELpiEvent" }, + { 4, 0xbc, "EEELpiDuration" }, + { 4, 0xc0, "RxDiscard" }, + { 4, 0xc8, "TxQPKTQ6" }, + { 4, 0xcc, "TxQPKTQ7" }, + { 4, 0xd0, "TxPkts64Octets" }, + { 4, 0xd4, "TxPkts65to127Octets" }, + { 4, 0xd8, "TxPkts128to255Octets" }, + { 4, 0xdc, "TxPkts256to511Ocets" }, + { 4, 0xe0, "TxPkts512to1023Ocets" }, + { 4, 0xe4, "TxPkts1024toMaxPktOcets" }, +}; + +#define B53_MIBS_58XX_SIZE ARRAY_SIZE(b53_mibs_58xx) + +static int b53_do_vlan_op(struct b53_device *dev, u8 op) +{ + unsigned int i; + + b53_write8(dev, B53_ARLIO_PAGE, dev->vta_regs[0], VTA_START_CMD | op); + + for (i = 0; i < 10; i++) { + u8 vta; + + b53_read8(dev, B53_ARLIO_PAGE, dev->vta_regs[0], &vta); + if (!(vta & VTA_START_CMD)) + return 0; + + usleep_range(100, 200); + } + + return -EIO; +} + +static void b53_set_vlan_entry(struct b53_device *dev, u16 vid, + struct b53_vlan *vlan) +{ + if (is5325(dev)) { + u32 entry = 0; + + if (vlan->members) { + entry = ((vlan->untag & VA_UNTAG_MASK_25) << + VA_UNTAG_S_25) | vlan->members; + if (dev->core_rev >= 3) + entry |= VA_VALID_25_R4 | vid << VA_VID_HIGH_S; + else + entry |= VA_VALID_25; + } + + b53_write32(dev, B53_VLAN_PAGE, B53_VLAN_WRITE_25, entry); + b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_TABLE_ACCESS_25, vid | + VTA_RW_STATE_WR | VTA_RW_OP_EN); + } else if (is5365(dev)) { + u16 entry = 0; + + if (vlan->members) + entry = ((vlan->untag & VA_UNTAG_MASK_65) << + VA_UNTAG_S_65) | vlan->members | VA_VALID_65; + + b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_WRITE_65, entry); + b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_TABLE_ACCESS_65, vid | + VTA_RW_STATE_WR | VTA_RW_OP_EN); + } else { + b53_write16(dev, B53_ARLIO_PAGE, dev->vta_regs[1], vid); + b53_write32(dev, B53_ARLIO_PAGE, dev->vta_regs[2], + (vlan->untag << VTE_UNTAG_S) | vlan->members); + + b53_do_vlan_op(dev, VTA_CMD_WRITE); + } + + dev_dbg(dev->ds->dev, "VID: %d, members: 0x%04x, untag: 0x%04x\n", + vid, vlan->members, vlan->untag); +} + +static void b53_get_vlan_entry(struct b53_device *dev, u16 vid, + struct b53_vlan *vlan) +{ + if (is5325(dev)) { + u32 entry = 0; + + b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_TABLE_ACCESS_25, vid | + VTA_RW_STATE_RD | VTA_RW_OP_EN); + b53_read32(dev, B53_VLAN_PAGE, B53_VLAN_WRITE_25, &entry); + + if (dev->core_rev >= 3) + vlan->valid = !!(entry & VA_VALID_25_R4); + else + vlan->valid = !!(entry & VA_VALID_25); + vlan->members = entry & VA_MEMBER_MASK; + vlan->untag = (entry >> VA_UNTAG_S_25) & VA_UNTAG_MASK_25; + + } else if (is5365(dev)) { + u16 entry = 0; + + b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_TABLE_ACCESS_65, vid | + VTA_RW_STATE_WR | VTA_RW_OP_EN); + b53_read16(dev, B53_VLAN_PAGE, B53_VLAN_WRITE_65, &entry); + + vlan->valid = !!(entry & VA_VALID_65); + vlan->members = entry & VA_MEMBER_MASK; + vlan->untag = (entry >> VA_UNTAG_S_65) & VA_UNTAG_MASK_65; + } else { + u32 entry = 0; + + b53_write16(dev, B53_ARLIO_PAGE, dev->vta_regs[1], vid); + b53_do_vlan_op(dev, VTA_CMD_READ); + b53_read32(dev, B53_ARLIO_PAGE, dev->vta_regs[2], &entry); + vlan->members = entry & VTE_MEMBERS; + vlan->untag = (entry >> VTE_UNTAG_S) & VTE_MEMBERS; + vlan->valid = true; + } +} + +static void b53_set_forwarding(struct b53_device *dev, int enable) +{ + u8 mgmt; + + b53_read8(dev, B53_CTRL_PAGE, B53_SWITCH_MODE, &mgmt); + + if (enable) + mgmt |= SM_SW_FWD_EN; + else + mgmt &= ~SM_SW_FWD_EN; + + b53_write8(dev, B53_CTRL_PAGE, B53_SWITCH_MODE, mgmt); + + /* Include IMP port in dumb forwarding mode + */ + b53_read8(dev, B53_CTRL_PAGE, B53_SWITCH_CTRL, &mgmt); + mgmt |= B53_MII_DUMB_FWDG_EN; + b53_write8(dev, B53_CTRL_PAGE, B53_SWITCH_CTRL, mgmt); + + /* Look at B53_UC_FWD_EN and B53_MC_FWD_EN to decide whether + * frames should be flooded or not. + */ + b53_read8(dev, B53_CTRL_PAGE, B53_IP_MULTICAST_CTRL, &mgmt); + mgmt |= B53_UC_FWD_EN | B53_MC_FWD_EN | B53_IPMC_FWD_EN; + b53_write8(dev, B53_CTRL_PAGE, B53_IP_MULTICAST_CTRL, mgmt); +} + +static void b53_enable_vlan(struct b53_device *dev, int port, bool enable, + bool enable_filtering) +{ + u8 mgmt, vc0, vc1, vc4 = 0, vc5; + + b53_read8(dev, B53_CTRL_PAGE, B53_SWITCH_MODE, &mgmt); + b53_read8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL0, &vc0); + b53_read8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL1, &vc1); + + if (is5325(dev) || is5365(dev)) { + b53_read8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL4_25, &vc4); + b53_read8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL5_25, &vc5); + } else if (is63xx(dev)) { + b53_read8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL4_63XX, &vc4); + b53_read8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL5_63XX, &vc5); + } else { + b53_read8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL4, &vc4); + b53_read8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL5, &vc5); + } + + if (enable) { + vc0 |= VC0_VLAN_EN | VC0_VID_CHK_EN | VC0_VID_HASH_VID; + vc1 |= VC1_RX_MCST_UNTAG_EN | VC1_RX_MCST_FWD_EN; + vc4 &= ~VC4_ING_VID_CHECK_MASK; + if (enable_filtering) { + vc4 |= VC4_ING_VID_VIO_DROP << VC4_ING_VID_CHECK_S; + vc5 |= VC5_DROP_VTABLE_MISS; + } else { + vc4 |= VC4_ING_VID_VIO_FWD << VC4_ING_VID_CHECK_S; + vc5 &= ~VC5_DROP_VTABLE_MISS; + } + + if (is5325(dev)) + vc0 &= ~VC0_RESERVED_1; + + if (is5325(dev) || is5365(dev)) + vc1 |= VC1_RX_MCST_TAG_EN; + + } else { + vc0 &= ~(VC0_VLAN_EN | VC0_VID_CHK_EN | VC0_VID_HASH_VID); + vc1 &= ~(VC1_RX_MCST_UNTAG_EN | VC1_RX_MCST_FWD_EN); + vc4 &= ~VC4_ING_VID_CHECK_MASK; + vc5 &= ~VC5_DROP_VTABLE_MISS; + + if (is5325(dev) || is5365(dev)) + vc4 |= VC4_ING_VID_VIO_FWD << VC4_ING_VID_CHECK_S; + else + vc4 |= VC4_ING_VID_VIO_TO_IMP << VC4_ING_VID_CHECK_S; + + if (is5325(dev) || is5365(dev)) + vc1 &= ~VC1_RX_MCST_TAG_EN; + } + + if (!is5325(dev) && !is5365(dev)) + vc5 &= ~VC5_VID_FFF_EN; + + b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL0, vc0); + b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL1, vc1); + + if (is5325(dev) || is5365(dev)) { + /* enable the high 8 bit vid check on 5325 */ + if (is5325(dev) && enable) + b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL3, + VC3_HIGH_8BIT_EN); + else + b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL3, 0); + + b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL4_25, vc4); + b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL5_25, vc5); + } else if (is63xx(dev)) { + b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_CTRL3_63XX, 0); + b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL4_63XX, vc4); + b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL5_63XX, vc5); + } else { + b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_CTRL3, 0); + b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL4, vc4); + b53_write8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL5, vc5); + } + + b53_write8(dev, B53_CTRL_PAGE, B53_SWITCH_MODE, mgmt); + + dev->vlan_enabled = enable; + + dev_dbg(dev->dev, "Port %d VLAN enabled: %d, filtering: %d\n", + port, enable, enable_filtering); +} + +static int b53_set_jumbo(struct b53_device *dev, bool enable, bool allow_10_100) +{ + u32 port_mask = 0; + u16 max_size = JMS_MIN_SIZE; + + if (is5325(dev) || is5365(dev)) + return -EINVAL; + + if (enable) { + port_mask = dev->enabled_ports; + max_size = JMS_MAX_SIZE; + if (allow_10_100) + port_mask |= JPM_10_100_JUMBO_EN; + } + + b53_write32(dev, B53_JUMBO_PAGE, dev->jumbo_pm_reg, port_mask); + return b53_write16(dev, B53_JUMBO_PAGE, dev->jumbo_size_reg, max_size); +} + +static int b53_flush_arl(struct b53_device *dev, u8 mask) +{ + unsigned int i; + + b53_write8(dev, B53_CTRL_PAGE, B53_FAST_AGE_CTRL, + FAST_AGE_DONE | FAST_AGE_DYNAMIC | mask); + + for (i = 0; i < 10; i++) { + u8 fast_age_ctrl; + + b53_read8(dev, B53_CTRL_PAGE, B53_FAST_AGE_CTRL, + &fast_age_ctrl); + + if (!(fast_age_ctrl & FAST_AGE_DONE)) + goto out; + + msleep(1); + } + + return -ETIMEDOUT; +out: + /* Only age dynamic entries (default behavior) */ + b53_write8(dev, B53_CTRL_PAGE, B53_FAST_AGE_CTRL, FAST_AGE_DYNAMIC); + return 0; +} + +static int b53_fast_age_port(struct b53_device *dev, int port) +{ + b53_write8(dev, B53_CTRL_PAGE, B53_FAST_AGE_PORT_CTRL, port); + + return b53_flush_arl(dev, FAST_AGE_PORT); +} + +static int b53_fast_age_vlan(struct b53_device *dev, u16 vid) +{ + b53_write16(dev, B53_CTRL_PAGE, B53_FAST_AGE_VID_CTRL, vid); + + return b53_flush_arl(dev, FAST_AGE_VLAN); +} + +void b53_imp_vlan_setup(struct dsa_switch *ds, int cpu_port) +{ + struct b53_device *dev = ds->priv; + unsigned int i; + u16 pvlan; + + /* Enable the IMP port to be in the same VLAN as the other ports + * on a per-port basis such that we only have Port i and IMP in + * the same VLAN. + */ + b53_for_each_port(dev, i) { + b53_read16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(i), &pvlan); + pvlan |= BIT(cpu_port); + b53_write16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(i), pvlan); + } +} +EXPORT_SYMBOL(b53_imp_vlan_setup); + +static void b53_port_set_ucast_flood(struct b53_device *dev, int port, + bool unicast) +{ + u16 uc; + + b53_read16(dev, B53_CTRL_PAGE, B53_UC_FLOOD_MASK, &uc); + if (unicast) + uc |= BIT(port); + else + uc &= ~BIT(port); + b53_write16(dev, B53_CTRL_PAGE, B53_UC_FLOOD_MASK, uc); +} + +static void b53_port_set_mcast_flood(struct b53_device *dev, int port, + bool multicast) +{ + u16 mc; + + b53_read16(dev, B53_CTRL_PAGE, B53_MC_FLOOD_MASK, &mc); + if (multicast) + mc |= BIT(port); + else + mc &= ~BIT(port); + b53_write16(dev, B53_CTRL_PAGE, B53_MC_FLOOD_MASK, mc); + + b53_read16(dev, B53_CTRL_PAGE, B53_IPMC_FLOOD_MASK, &mc); + if (multicast) + mc |= BIT(port); + else + mc &= ~BIT(port); + b53_write16(dev, B53_CTRL_PAGE, B53_IPMC_FLOOD_MASK, mc); +} + +static void b53_port_set_learning(struct b53_device *dev, int port, + bool learning) +{ + u16 reg; + + b53_read16(dev, B53_CTRL_PAGE, B53_DIS_LEARNING, ®); + if (learning) + reg &= ~BIT(port); + else + reg |= BIT(port); + b53_write16(dev, B53_CTRL_PAGE, B53_DIS_LEARNING, reg); +} + +int b53_enable_port(struct dsa_switch *ds, int port, struct phy_device *phy) +{ + struct b53_device *dev = ds->priv; + unsigned int cpu_port; + int ret = 0; + u16 pvlan; + + if (!dsa_is_user_port(ds, port)) + return 0; + + cpu_port = dsa_to_port(ds, port)->cpu_dp->index; + + b53_port_set_ucast_flood(dev, port, true); + b53_port_set_mcast_flood(dev, port, true); + b53_port_set_learning(dev, port, false); + + if (dev->ops->irq_enable) + ret = dev->ops->irq_enable(dev, port); + if (ret) + return ret; + + /* Clear the Rx and Tx disable bits and set to no spanning tree */ + b53_write8(dev, B53_CTRL_PAGE, B53_PORT_CTRL(port), 0); + + /* Set this port, and only this one to be in the default VLAN, + * if member of a bridge, restore its membership prior to + * bringing down this port. + */ + b53_read16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(port), &pvlan); + pvlan &= ~0x1ff; + pvlan |= BIT(port); + pvlan |= dev->ports[port].vlan_ctl_mask; + b53_write16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(port), pvlan); + + b53_imp_vlan_setup(ds, cpu_port); + + /* If EEE was enabled, restore it */ + if (dev->ports[port].eee.eee_enabled) + b53_eee_enable_set(ds, port, true); + + return 0; +} +EXPORT_SYMBOL(b53_enable_port); + +void b53_disable_port(struct dsa_switch *ds, int port) +{ + struct b53_device *dev = ds->priv; + u8 reg; + + /* Disable Tx/Rx for the port */ + b53_read8(dev, B53_CTRL_PAGE, B53_PORT_CTRL(port), ®); + reg |= PORT_CTRL_RX_DISABLE | PORT_CTRL_TX_DISABLE; + b53_write8(dev, B53_CTRL_PAGE, B53_PORT_CTRL(port), reg); + + if (dev->ops->irq_disable) + dev->ops->irq_disable(dev, port); +} +EXPORT_SYMBOL(b53_disable_port); + +void b53_brcm_hdr_setup(struct dsa_switch *ds, int port) +{ + struct b53_device *dev = ds->priv; + bool tag_en = !(dev->tag_protocol == DSA_TAG_PROTO_NONE); + u8 hdr_ctl, val; + u16 reg; + + /* Resolve which bit controls the Broadcom tag */ + switch (port) { + case 8: + val = BRCM_HDR_P8_EN; + break; + case 7: + val = BRCM_HDR_P7_EN; + break; + case 5: + val = BRCM_HDR_P5_EN; + break; + default: + val = 0; + break; + } + + /* Enable management mode if tagging is requested */ + b53_read8(dev, B53_CTRL_PAGE, B53_SWITCH_MODE, &hdr_ctl); + if (tag_en) + hdr_ctl |= SM_SW_FWD_MODE; + else + hdr_ctl &= ~SM_SW_FWD_MODE; + b53_write8(dev, B53_CTRL_PAGE, B53_SWITCH_MODE, hdr_ctl); + + /* Configure the appropriate IMP port */ + b53_read8(dev, B53_MGMT_PAGE, B53_GLOBAL_CONFIG, &hdr_ctl); + if (port == 8) + hdr_ctl |= GC_FRM_MGMT_PORT_MII; + else if (port == 5) + hdr_ctl |= GC_FRM_MGMT_PORT_M; + b53_write8(dev, B53_MGMT_PAGE, B53_GLOBAL_CONFIG, hdr_ctl); + + /* Enable Broadcom tags for IMP port */ + b53_read8(dev, B53_MGMT_PAGE, B53_BRCM_HDR, &hdr_ctl); + if (tag_en) + hdr_ctl |= val; + else + hdr_ctl &= ~val; + b53_write8(dev, B53_MGMT_PAGE, B53_BRCM_HDR, hdr_ctl); + + /* Registers below are only accessible on newer devices */ + if (!is58xx(dev)) + return; + + /* Enable reception Broadcom tag for CPU TX (switch RX) to + * allow us to tag outgoing frames + */ + b53_read16(dev, B53_MGMT_PAGE, B53_BRCM_HDR_RX_DIS, ®); + if (tag_en) + reg &= ~BIT(port); + else + reg |= BIT(port); + b53_write16(dev, B53_MGMT_PAGE, B53_BRCM_HDR_RX_DIS, reg); + + /* Enable transmission of Broadcom tags from the switch (CPU RX) to + * allow delivering frames to the per-port net_devices + */ + b53_read16(dev, B53_MGMT_PAGE, B53_BRCM_HDR_TX_DIS, ®); + if (tag_en) + reg &= ~BIT(port); + else + reg |= BIT(port); + b53_write16(dev, B53_MGMT_PAGE, B53_BRCM_HDR_TX_DIS, reg); +} +EXPORT_SYMBOL(b53_brcm_hdr_setup); + +static void b53_enable_cpu_port(struct b53_device *dev, int port) +{ + u8 port_ctrl; + + /* BCM5325 CPU port is at 8 */ + if ((is5325(dev) || is5365(dev)) && port == B53_CPU_PORT_25) + port = B53_CPU_PORT; + + port_ctrl = PORT_CTRL_RX_BCST_EN | + PORT_CTRL_RX_MCST_EN | + PORT_CTRL_RX_UCST_EN; + b53_write8(dev, B53_CTRL_PAGE, B53_PORT_CTRL(port), port_ctrl); + + b53_brcm_hdr_setup(dev->ds, port); + + b53_port_set_ucast_flood(dev, port, true); + b53_port_set_mcast_flood(dev, port, true); + b53_port_set_learning(dev, port, false); +} + +static void b53_enable_mib(struct b53_device *dev) +{ + u8 gc; + + b53_read8(dev, B53_MGMT_PAGE, B53_GLOBAL_CONFIG, &gc); + gc &= ~(GC_RESET_MIB | GC_MIB_AC_EN); + b53_write8(dev, B53_MGMT_PAGE, B53_GLOBAL_CONFIG, gc); +} + +static u16 b53_default_pvid(struct b53_device *dev) +{ + if (is5325(dev) || is5365(dev)) + return 1; + else + return 0; +} + +static bool b53_vlan_port_needs_forced_tagged(struct dsa_switch *ds, int port) +{ + struct b53_device *dev = ds->priv; + + return dev->tag_protocol == DSA_TAG_PROTO_NONE && dsa_is_cpu_port(ds, port); +} + +int b53_configure_vlan(struct dsa_switch *ds) +{ + struct b53_device *dev = ds->priv; + struct b53_vlan vl = { 0 }; + struct b53_vlan *v; + int i, def_vid; + u16 vid; + + def_vid = b53_default_pvid(dev); + + /* clear all vlan entries */ + if (is5325(dev) || is5365(dev)) { + for (i = def_vid; i < dev->num_vlans; i++) + b53_set_vlan_entry(dev, i, &vl); + } else { + b53_do_vlan_op(dev, VTA_CMD_CLEAR); + } + + b53_enable_vlan(dev, -1, dev->vlan_enabled, ds->vlan_filtering); + + /* Create an untagged VLAN entry for the default PVID in case + * CONFIG_VLAN_8021Q is disabled and there are no calls to + * dsa_slave_vlan_rx_add_vid() to create the default VLAN + * entry. Do this only when the tagging protocol is not + * DSA_TAG_PROTO_NONE + */ + b53_for_each_port(dev, i) { + v = &dev->vlans[def_vid]; + v->members |= BIT(i); + if (!b53_vlan_port_needs_forced_tagged(ds, i)) + v->untag = v->members; + b53_write16(dev, B53_VLAN_PAGE, + B53_VLAN_PORT_DEF_TAG(i), def_vid); + } + + /* Upon initial call we have not set-up any VLANs, but upon + * system resume, we need to restore all VLAN entries. + */ + for (vid = def_vid; vid < dev->num_vlans; vid++) { + v = &dev->vlans[vid]; + + if (!v->members) + continue; + + b53_set_vlan_entry(dev, vid, v); + b53_fast_age_vlan(dev, vid); + } + + return 0; +} +EXPORT_SYMBOL(b53_configure_vlan); + +static void b53_switch_reset_gpio(struct b53_device *dev) +{ + int gpio = dev->reset_gpio; + + if (gpio < 0) + return; + + /* Reset sequence: RESET low(50ms)->high(20ms) + */ + gpio_set_value(gpio, 0); + mdelay(50); + + gpio_set_value(gpio, 1); + mdelay(20); + + dev->current_page = 0xff; +} + +static int b53_switch_reset(struct b53_device *dev) +{ + unsigned int timeout = 1000; + u8 mgmt, reg; + + b53_switch_reset_gpio(dev); + + if (is539x(dev)) { + b53_write8(dev, B53_CTRL_PAGE, B53_SOFTRESET, 0x83); + b53_write8(dev, B53_CTRL_PAGE, B53_SOFTRESET, 0x00); + } + + /* This is specific to 58xx devices here, do not use is58xx() which + * covers the larger Starfigther 2 family, including 7445/7278 which + * still use this driver as a library and need to perform the reset + * earlier. + */ + if (dev->chip_id == BCM58XX_DEVICE_ID || + dev->chip_id == BCM583XX_DEVICE_ID) { + b53_read8(dev, B53_CTRL_PAGE, B53_SOFTRESET, ®); + reg |= SW_RST | EN_SW_RST | EN_CH_RST; + b53_write8(dev, B53_CTRL_PAGE, B53_SOFTRESET, reg); + + do { + b53_read8(dev, B53_CTRL_PAGE, B53_SOFTRESET, ®); + if (!(reg & SW_RST)) + break; + + usleep_range(1000, 2000); + } while (timeout-- > 0); + + if (timeout == 0) { + dev_err(dev->dev, + "Timeout waiting for SW_RST to clear!\n"); + return -ETIMEDOUT; + } + } + + b53_read8(dev, B53_CTRL_PAGE, B53_SWITCH_MODE, &mgmt); + + if (!(mgmt & SM_SW_FWD_EN)) { + mgmt &= ~SM_SW_FWD_MODE; + mgmt |= SM_SW_FWD_EN; + + b53_write8(dev, B53_CTRL_PAGE, B53_SWITCH_MODE, mgmt); + b53_read8(dev, B53_CTRL_PAGE, B53_SWITCH_MODE, &mgmt); + + if (!(mgmt & SM_SW_FWD_EN)) { + dev_err(dev->dev, "Failed to enable switch!\n"); + return -EINVAL; + } + } + + b53_enable_mib(dev); + + return b53_flush_arl(dev, FAST_AGE_STATIC); +} + +static int b53_phy_read16(struct dsa_switch *ds, int addr, int reg) +{ + struct b53_device *priv = ds->priv; + u16 value = 0; + int ret; + + if (priv->ops->phy_read16) + ret = priv->ops->phy_read16(priv, addr, reg, &value); + else + ret = b53_read16(priv, B53_PORT_MII_PAGE(addr), + reg * 2, &value); + + return ret ? ret : value; +} + +static int b53_phy_write16(struct dsa_switch *ds, int addr, int reg, u16 val) +{ + struct b53_device *priv = ds->priv; + + if (priv->ops->phy_write16) + return priv->ops->phy_write16(priv, addr, reg, val); + + return b53_write16(priv, B53_PORT_MII_PAGE(addr), reg * 2, val); +} + +static int b53_reset_switch(struct b53_device *priv) +{ + /* reset vlans */ + memset(priv->vlans, 0, sizeof(*priv->vlans) * priv->num_vlans); + memset(priv->ports, 0, sizeof(*priv->ports) * priv->num_ports); + + priv->serdes_lane = B53_INVALID_LANE; + + return b53_switch_reset(priv); +} + +static int b53_apply_config(struct b53_device *priv) +{ + /* disable switching */ + b53_set_forwarding(priv, 0); + + b53_configure_vlan(priv->ds); + + /* enable switching */ + b53_set_forwarding(priv, 1); + + return 0; +} + +static void b53_reset_mib(struct b53_device *priv) +{ + u8 gc; + + b53_read8(priv, B53_MGMT_PAGE, B53_GLOBAL_CONFIG, &gc); + + b53_write8(priv, B53_MGMT_PAGE, B53_GLOBAL_CONFIG, gc | GC_RESET_MIB); + msleep(1); + b53_write8(priv, B53_MGMT_PAGE, B53_GLOBAL_CONFIG, gc & ~GC_RESET_MIB); + msleep(1); +} + +static const struct b53_mib_desc *b53_get_mib(struct b53_device *dev) +{ + if (is5365(dev)) + return b53_mibs_65; + else if (is63xx(dev)) + return b53_mibs_63xx; + else if (is58xx(dev)) + return b53_mibs_58xx; + else + return b53_mibs; +} + +static unsigned int b53_get_mib_size(struct b53_device *dev) +{ + if (is5365(dev)) + return B53_MIBS_65_SIZE; + else if (is63xx(dev)) + return B53_MIBS_63XX_SIZE; + else if (is58xx(dev)) + return B53_MIBS_58XX_SIZE; + else + return B53_MIBS_SIZE; +} + +static struct phy_device *b53_get_phy_device(struct dsa_switch *ds, int port) +{ + /* These ports typically do not have built-in PHYs */ + switch (port) { + case B53_CPU_PORT_25: + case 7: + case B53_CPU_PORT: + return NULL; + } + + return mdiobus_get_phy(ds->slave_mii_bus, port); +} + +void b53_get_strings(struct dsa_switch *ds, int port, u32 stringset, + uint8_t *data) +{ + struct b53_device *dev = ds->priv; + const struct b53_mib_desc *mibs = b53_get_mib(dev); + unsigned int mib_size = b53_get_mib_size(dev); + struct phy_device *phydev; + unsigned int i; + + if (stringset == ETH_SS_STATS) { + for (i = 0; i < mib_size; i++) + strscpy(data + i * ETH_GSTRING_LEN, + mibs[i].name, ETH_GSTRING_LEN); + } else if (stringset == ETH_SS_PHY_STATS) { + phydev = b53_get_phy_device(ds, port); + if (!phydev) + return; + + phy_ethtool_get_strings(phydev, data); + } +} +EXPORT_SYMBOL(b53_get_strings); + +void b53_get_ethtool_stats(struct dsa_switch *ds, int port, uint64_t *data) +{ + struct b53_device *dev = ds->priv; + const struct b53_mib_desc *mibs = b53_get_mib(dev); + unsigned int mib_size = b53_get_mib_size(dev); + const struct b53_mib_desc *s; + unsigned int i; + u64 val = 0; + + if (is5365(dev) && port == 5) + port = 8; + + mutex_lock(&dev->stats_mutex); + + for (i = 0; i < mib_size; i++) { + s = &mibs[i]; + + if (s->size == 8) { + b53_read64(dev, B53_MIB_PAGE(port), s->offset, &val); + } else { + u32 val32; + + b53_read32(dev, B53_MIB_PAGE(port), s->offset, + &val32); + val = val32; + } + data[i] = (u64)val; + } + + mutex_unlock(&dev->stats_mutex); +} +EXPORT_SYMBOL(b53_get_ethtool_stats); + +void b53_get_ethtool_phy_stats(struct dsa_switch *ds, int port, uint64_t *data) +{ + struct phy_device *phydev; + + phydev = b53_get_phy_device(ds, port); + if (!phydev) + return; + + phy_ethtool_get_stats(phydev, NULL, data); +} +EXPORT_SYMBOL(b53_get_ethtool_phy_stats); + +int b53_get_sset_count(struct dsa_switch *ds, int port, int sset) +{ + struct b53_device *dev = ds->priv; + struct phy_device *phydev; + + if (sset == ETH_SS_STATS) { + return b53_get_mib_size(dev); + } else if (sset == ETH_SS_PHY_STATS) { + phydev = b53_get_phy_device(ds, port); + if (!phydev) + return 0; + + return phy_ethtool_get_sset_count(phydev); + } + + return 0; +} +EXPORT_SYMBOL(b53_get_sset_count); + +enum b53_devlink_resource_id { + B53_DEVLINK_PARAM_ID_VLAN_TABLE, +}; + +static u64 b53_devlink_vlan_table_get(void *priv) +{ + struct b53_device *dev = priv; + struct b53_vlan *vl; + unsigned int i; + u64 count = 0; + + for (i = 0; i < dev->num_vlans; i++) { + vl = &dev->vlans[i]; + if (vl->members) + count++; + } + + return count; +} + +int b53_setup_devlink_resources(struct dsa_switch *ds) +{ + struct devlink_resource_size_params size_params; + struct b53_device *dev = ds->priv; + int err; + + devlink_resource_size_params_init(&size_params, dev->num_vlans, + dev->num_vlans, + 1, DEVLINK_RESOURCE_UNIT_ENTRY); + + err = dsa_devlink_resource_register(ds, "VLAN", dev->num_vlans, + B53_DEVLINK_PARAM_ID_VLAN_TABLE, + DEVLINK_RESOURCE_ID_PARENT_TOP, + &size_params); + if (err) + goto out; + + dsa_devlink_resource_occ_get_register(ds, + B53_DEVLINK_PARAM_ID_VLAN_TABLE, + b53_devlink_vlan_table_get, dev); + + return 0; +out: + dsa_devlink_resources_unregister(ds); + return err; +} +EXPORT_SYMBOL(b53_setup_devlink_resources); + +static int b53_setup(struct dsa_switch *ds) +{ + struct b53_device *dev = ds->priv; + unsigned int port; + int ret; + + /* Request bridge PVID untagged when DSA_TAG_PROTO_NONE is set + * which forces the CPU port to be tagged in all VLANs. + */ + ds->untag_bridge_pvid = dev->tag_protocol == DSA_TAG_PROTO_NONE; + + ret = b53_reset_switch(dev); + if (ret) { + dev_err(ds->dev, "failed to reset switch\n"); + return ret; + } + + b53_reset_mib(dev); + + ret = b53_apply_config(dev); + if (ret) { + dev_err(ds->dev, "failed to apply configuration\n"); + return ret; + } + + /* Configure IMP/CPU port, disable all other ports. Enabled + * ports will be configured with .port_enable + */ + for (port = 0; port < dev->num_ports; port++) { + if (dsa_is_cpu_port(ds, port)) + b53_enable_cpu_port(dev, port); + else + b53_disable_port(ds, port); + } + + return b53_setup_devlink_resources(ds); +} + +static void b53_teardown(struct dsa_switch *ds) +{ + dsa_devlink_resources_unregister(ds); +} + +static void b53_force_link(struct b53_device *dev, int port, int link) +{ + u8 reg, val, off; + + /* Override the port settings */ + if (port == dev->imp_port) { + off = B53_PORT_OVERRIDE_CTRL; + val = PORT_OVERRIDE_EN; + } else { + off = B53_GMII_PORT_OVERRIDE_CTRL(port); + val = GMII_PO_EN; + } + + b53_read8(dev, B53_CTRL_PAGE, off, ®); + reg |= val; + if (link) + reg |= PORT_OVERRIDE_LINK; + else + reg &= ~PORT_OVERRIDE_LINK; + b53_write8(dev, B53_CTRL_PAGE, off, reg); +} + +static void b53_force_port_config(struct b53_device *dev, int port, + int speed, int duplex, + bool tx_pause, bool rx_pause) +{ + u8 reg, val, off; + + /* Override the port settings */ + if (port == dev->imp_port) { + off = B53_PORT_OVERRIDE_CTRL; + val = PORT_OVERRIDE_EN; + } else { + off = B53_GMII_PORT_OVERRIDE_CTRL(port); + val = GMII_PO_EN; + } + + b53_read8(dev, B53_CTRL_PAGE, off, ®); + reg |= val; + if (duplex == DUPLEX_FULL) + reg |= PORT_OVERRIDE_FULL_DUPLEX; + else + reg &= ~PORT_OVERRIDE_FULL_DUPLEX; + + switch (speed) { + case 2000: + reg |= PORT_OVERRIDE_SPEED_2000M; + fallthrough; + case SPEED_1000: + reg |= PORT_OVERRIDE_SPEED_1000M; + break; + case SPEED_100: + reg |= PORT_OVERRIDE_SPEED_100M; + break; + case SPEED_10: + reg |= PORT_OVERRIDE_SPEED_10M; + break; + default: + dev_err(dev->dev, "unknown speed: %d\n", speed); + return; + } + + if (rx_pause) + reg |= PORT_OVERRIDE_RX_FLOW; + if (tx_pause) + reg |= PORT_OVERRIDE_TX_FLOW; + + b53_write8(dev, B53_CTRL_PAGE, off, reg); +} + +static void b53_adjust_63xx_rgmii(struct dsa_switch *ds, int port, + phy_interface_t interface) +{ + struct b53_device *dev = ds->priv; + u8 rgmii_ctrl = 0, off; + + if (port == dev->imp_port) + off = B53_RGMII_CTRL_IMP; + else + off = B53_RGMII_CTRL_P(port); + + b53_read8(dev, B53_CTRL_PAGE, off, &rgmii_ctrl); + + switch (interface) { + case PHY_INTERFACE_MODE_RGMII_ID: + rgmii_ctrl |= (RGMII_CTRL_DLL_RXC | RGMII_CTRL_DLL_TXC); + break; + case PHY_INTERFACE_MODE_RGMII_RXID: + rgmii_ctrl &= ~(RGMII_CTRL_DLL_TXC); + rgmii_ctrl |= RGMII_CTRL_DLL_RXC; + break; + case PHY_INTERFACE_MODE_RGMII_TXID: + rgmii_ctrl &= ~(RGMII_CTRL_DLL_RXC); + rgmii_ctrl |= RGMII_CTRL_DLL_TXC; + break; + case PHY_INTERFACE_MODE_RGMII: + default: + rgmii_ctrl &= ~(RGMII_CTRL_DLL_RXC | RGMII_CTRL_DLL_TXC); + break; + } + + if (port != dev->imp_port) { + if (is63268(dev)) + rgmii_ctrl |= RGMII_CTRL_MII_OVERRIDE; + + rgmii_ctrl |= RGMII_CTRL_ENABLE_GMII; + } + + b53_write8(dev, B53_CTRL_PAGE, off, rgmii_ctrl); + + dev_dbg(ds->dev, "Configured port %d for %s\n", port, + phy_modes(interface)); +} + +static void b53_adjust_link(struct dsa_switch *ds, int port, + struct phy_device *phydev) +{ + struct b53_device *dev = ds->priv; + struct ethtool_eee *p = &dev->ports[port].eee; + u8 rgmii_ctrl = 0, reg = 0, off; + bool tx_pause = false; + bool rx_pause = false; + + if (!phy_is_pseudo_fixed_link(phydev)) + return; + + /* Enable flow control on BCM5301x's CPU port */ + if (is5301x(dev) && dsa_is_cpu_port(ds, port)) + tx_pause = rx_pause = true; + + if (phydev->pause) { + if (phydev->asym_pause) + tx_pause = true; + rx_pause = true; + } + + b53_force_port_config(dev, port, phydev->speed, phydev->duplex, + tx_pause, rx_pause); + b53_force_link(dev, port, phydev->link); + + if (is63xx(dev) && port >= B53_63XX_RGMII0) + b53_adjust_63xx_rgmii(ds, port, phydev->interface); + + if (is531x5(dev) && phy_interface_is_rgmii(phydev)) { + if (port == dev->imp_port) + off = B53_RGMII_CTRL_IMP; + else + off = B53_RGMII_CTRL_P(port); + + /* Configure the port RGMII clock delay by DLL disabled and + * tx_clk aligned timing (restoring to reset defaults) + */ + b53_read8(dev, B53_CTRL_PAGE, off, &rgmii_ctrl); + rgmii_ctrl &= ~(RGMII_CTRL_DLL_RXC | RGMII_CTRL_DLL_TXC | + RGMII_CTRL_TIMING_SEL); + + /* PHY_INTERFACE_MODE_RGMII_TXID means TX internal delay, make + * sure that we enable the port TX clock internal delay to + * account for this internal delay that is inserted, otherwise + * the switch won't be able to receive correctly. + * + * PHY_INTERFACE_MODE_RGMII means that we are not introducing + * any delay neither on transmission nor reception, so the + * BCM53125 must also be configured accordingly to account for + * the lack of delay and introduce + * + * The BCM53125 switch has its RX clock and TX clock control + * swapped, hence the reason why we modify the TX clock path in + * the "RGMII" case + */ + if (phydev->interface == PHY_INTERFACE_MODE_RGMII_TXID) + rgmii_ctrl |= RGMII_CTRL_DLL_TXC; + if (phydev->interface == PHY_INTERFACE_MODE_RGMII) + rgmii_ctrl |= RGMII_CTRL_DLL_TXC | RGMII_CTRL_DLL_RXC; + rgmii_ctrl |= RGMII_CTRL_TIMING_SEL; + b53_write8(dev, B53_CTRL_PAGE, off, rgmii_ctrl); + + dev_info(ds->dev, "Configured port %d for %s\n", port, + phy_modes(phydev->interface)); + } + + /* configure MII port if necessary */ + if (is5325(dev)) { + b53_read8(dev, B53_CTRL_PAGE, B53_PORT_OVERRIDE_CTRL, + ®); + + /* reverse mii needs to be enabled */ + if (!(reg & PORT_OVERRIDE_RV_MII_25)) { + b53_write8(dev, B53_CTRL_PAGE, B53_PORT_OVERRIDE_CTRL, + reg | PORT_OVERRIDE_RV_MII_25); + b53_read8(dev, B53_CTRL_PAGE, B53_PORT_OVERRIDE_CTRL, + ®); + + if (!(reg & PORT_OVERRIDE_RV_MII_25)) { + dev_err(ds->dev, + "Failed to enable reverse MII mode\n"); + return; + } + } + } + + /* Re-negotiate EEE if it was enabled already */ + p->eee_enabled = b53_eee_init(ds, port, phydev); +} + +void b53_port_event(struct dsa_switch *ds, int port) +{ + struct b53_device *dev = ds->priv; + bool link; + u16 sts; + + b53_read16(dev, B53_STAT_PAGE, B53_LINK_STAT, &sts); + link = !!(sts & BIT(port)); + dsa_port_phylink_mac_change(ds, port, link); +} +EXPORT_SYMBOL(b53_port_event); + +static void b53_phylink_get_caps(struct dsa_switch *ds, int port, + struct phylink_config *config) +{ + struct b53_device *dev = ds->priv; + + /* Internal ports need GMII for PHYLIB */ + __set_bit(PHY_INTERFACE_MODE_GMII, config->supported_interfaces); + + /* These switches appear to support MII and RevMII too, but beyond + * this, the code gives very few clues. FIXME: We probably need more + * interface modes here. + * + * According to b53_srab_mux_init(), ports 3..5 can support: + * SGMII, MII, GMII, RGMII or INTERNAL depending on the MUX setting. + * However, the interface mode read from the MUX configuration is + * not passed back to DSA, so phylink uses NA. + * DT can specify RGMII for ports 0, 1. + * For MDIO, port 8 can be RGMII_TXID. + */ + __set_bit(PHY_INTERFACE_MODE_MII, config->supported_interfaces); + __set_bit(PHY_INTERFACE_MODE_REVMII, config->supported_interfaces); + + config->mac_capabilities = MAC_ASYM_PAUSE | MAC_SYM_PAUSE | + MAC_10 | MAC_100; + + /* 5325/5365 are not capable of gigabit speeds, everything else is. + * Note: the original code also exclulded Gigagbit for MII, RevMII + * and 802.3z modes. MII and RevMII are not able to work above 100M, + * so will be excluded by the generic validator implementation. + * However, the exclusion of Gigabit for 802.3z just seems wrong. + */ + if (!(is5325(dev) || is5365(dev))) + config->mac_capabilities |= MAC_1000; + + /* Get the implementation specific capabilities */ + if (dev->ops->phylink_get_caps) + dev->ops->phylink_get_caps(dev, port, config); +} + +static struct phylink_pcs *b53_phylink_mac_select_pcs(struct dsa_switch *ds, + int port, + phy_interface_t interface) +{ + struct b53_device *dev = ds->priv; + + if (!dev->ops->phylink_mac_select_pcs) + return NULL; + + return dev->ops->phylink_mac_select_pcs(dev, port, interface); +} + +void b53_phylink_mac_config(struct dsa_switch *ds, int port, + unsigned int mode, + const struct phylink_link_state *state) +{ +} +EXPORT_SYMBOL(b53_phylink_mac_config); + +void b53_phylink_mac_link_down(struct dsa_switch *ds, int port, + unsigned int mode, + phy_interface_t interface) +{ + struct b53_device *dev = ds->priv; + + if (mode == MLO_AN_PHY) + return; + + if (mode == MLO_AN_FIXED) { + b53_force_link(dev, port, false); + return; + } + + if (phy_interface_mode_is_8023z(interface) && + dev->ops->serdes_link_set) + dev->ops->serdes_link_set(dev, port, mode, interface, false); +} +EXPORT_SYMBOL(b53_phylink_mac_link_down); + +void b53_phylink_mac_link_up(struct dsa_switch *ds, int port, + unsigned int mode, + phy_interface_t interface, + struct phy_device *phydev, + int speed, int duplex, + bool tx_pause, bool rx_pause) +{ + struct b53_device *dev = ds->priv; + + if (is63xx(dev) && port >= B53_63XX_RGMII0) + b53_adjust_63xx_rgmii(ds, port, interface); + + if (mode == MLO_AN_PHY) + return; + + if (mode == MLO_AN_FIXED) { + b53_force_port_config(dev, port, speed, duplex, + tx_pause, rx_pause); + b53_force_link(dev, port, true); + return; + } + + if (phy_interface_mode_is_8023z(interface) && + dev->ops->serdes_link_set) + dev->ops->serdes_link_set(dev, port, mode, interface, true); +} +EXPORT_SYMBOL(b53_phylink_mac_link_up); + +int b53_vlan_filtering(struct dsa_switch *ds, int port, bool vlan_filtering, + struct netlink_ext_ack *extack) +{ + struct b53_device *dev = ds->priv; + + b53_enable_vlan(dev, port, dev->vlan_enabled, vlan_filtering); + + return 0; +} +EXPORT_SYMBOL(b53_vlan_filtering); + +static int b53_vlan_prepare(struct dsa_switch *ds, int port, + const struct switchdev_obj_port_vlan *vlan) +{ + struct b53_device *dev = ds->priv; + + if ((is5325(dev) || is5365(dev)) && vlan->vid == 0) + return -EOPNOTSUPP; + + /* Port 7 on 7278 connects to the ASP's UniMAC which is not capable of + * receiving VLAN tagged frames at all, we can still allow the port to + * be configured for egress untagged. + */ + if (dev->chip_id == BCM7278_DEVICE_ID && port == 7 && + !(vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED)) + return -EINVAL; + + if (vlan->vid >= dev->num_vlans) + return -ERANGE; + + b53_enable_vlan(dev, port, true, ds->vlan_filtering); + + return 0; +} + +int b53_vlan_add(struct dsa_switch *ds, int port, + const struct switchdev_obj_port_vlan *vlan, + struct netlink_ext_ack *extack) +{ + struct b53_device *dev = ds->priv; + bool untagged = vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED; + bool pvid = vlan->flags & BRIDGE_VLAN_INFO_PVID; + struct b53_vlan *vl; + int err; + + err = b53_vlan_prepare(ds, port, vlan); + if (err) + return err; + + vl = &dev->vlans[vlan->vid]; + + b53_get_vlan_entry(dev, vlan->vid, vl); + + if (vlan->vid == 0 && vlan->vid == b53_default_pvid(dev)) + untagged = true; + + vl->members |= BIT(port); + if (untagged && !b53_vlan_port_needs_forced_tagged(ds, port)) + vl->untag |= BIT(port); + else + vl->untag &= ~BIT(port); + + b53_set_vlan_entry(dev, vlan->vid, vl); + b53_fast_age_vlan(dev, vlan->vid); + + if (pvid && !dsa_is_cpu_port(ds, port)) { + b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_PORT_DEF_TAG(port), + vlan->vid); + b53_fast_age_vlan(dev, vlan->vid); + } + + return 0; +} +EXPORT_SYMBOL(b53_vlan_add); + +int b53_vlan_del(struct dsa_switch *ds, int port, + const struct switchdev_obj_port_vlan *vlan) +{ + struct b53_device *dev = ds->priv; + bool untagged = vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED; + struct b53_vlan *vl; + u16 pvid; + + b53_read16(dev, B53_VLAN_PAGE, B53_VLAN_PORT_DEF_TAG(port), &pvid); + + vl = &dev->vlans[vlan->vid]; + + b53_get_vlan_entry(dev, vlan->vid, vl); + + vl->members &= ~BIT(port); + + if (pvid == vlan->vid) + pvid = b53_default_pvid(dev); + + if (untagged && !b53_vlan_port_needs_forced_tagged(ds, port)) + vl->untag &= ~(BIT(port)); + + b53_set_vlan_entry(dev, vlan->vid, vl); + b53_fast_age_vlan(dev, vlan->vid); + + b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_PORT_DEF_TAG(port), pvid); + b53_fast_age_vlan(dev, pvid); + + return 0; +} +EXPORT_SYMBOL(b53_vlan_del); + +/* Address Resolution Logic routines. Caller must hold &dev->arl_mutex. */ +static int b53_arl_op_wait(struct b53_device *dev) +{ + unsigned int timeout = 10; + u8 reg; + + do { + b53_read8(dev, B53_ARLIO_PAGE, B53_ARLTBL_RW_CTRL, ®); + if (!(reg & ARLTBL_START_DONE)) + return 0; + + usleep_range(1000, 2000); + } while (timeout--); + + dev_warn(dev->dev, "timeout waiting for ARL to finish: 0x%02x\n", reg); + + return -ETIMEDOUT; +} + +static int b53_arl_rw_op(struct b53_device *dev, unsigned int op) +{ + u8 reg; + + if (op > ARLTBL_RW) + return -EINVAL; + + b53_read8(dev, B53_ARLIO_PAGE, B53_ARLTBL_RW_CTRL, ®); + reg |= ARLTBL_START_DONE; + if (op) + reg |= ARLTBL_RW; + else + reg &= ~ARLTBL_RW; + if (dev->vlan_enabled) + reg &= ~ARLTBL_IVL_SVL_SELECT; + else + reg |= ARLTBL_IVL_SVL_SELECT; + b53_write8(dev, B53_ARLIO_PAGE, B53_ARLTBL_RW_CTRL, reg); + + return b53_arl_op_wait(dev); +} + +static int b53_arl_read(struct b53_device *dev, u64 mac, + u16 vid, struct b53_arl_entry *ent, u8 *idx) +{ + DECLARE_BITMAP(free_bins, B53_ARLTBL_MAX_BIN_ENTRIES); + unsigned int i; + int ret; + + ret = b53_arl_op_wait(dev); + if (ret) + return ret; + + bitmap_zero(free_bins, dev->num_arl_bins); + + /* Read the bins */ + for (i = 0; i < dev->num_arl_bins; i++) { + u64 mac_vid; + u32 fwd_entry; + + b53_read64(dev, B53_ARLIO_PAGE, + B53_ARLTBL_MAC_VID_ENTRY(i), &mac_vid); + b53_read32(dev, B53_ARLIO_PAGE, + B53_ARLTBL_DATA_ENTRY(i), &fwd_entry); + b53_arl_to_entry(ent, mac_vid, fwd_entry); + + if (!(fwd_entry & ARLTBL_VALID)) { + set_bit(i, free_bins); + continue; + } + if ((mac_vid & ARLTBL_MAC_MASK) != mac) + continue; + if (dev->vlan_enabled && + ((mac_vid >> ARLTBL_VID_S) & ARLTBL_VID_MASK) != vid) + continue; + *idx = i; + return 0; + } + + *idx = find_first_bit(free_bins, dev->num_arl_bins); + return *idx >= dev->num_arl_bins ? -ENOSPC : -ENOENT; +} + +static int b53_arl_op(struct b53_device *dev, int op, int port, + const unsigned char *addr, u16 vid, bool is_valid) +{ + struct b53_arl_entry ent; + u32 fwd_entry; + u64 mac, mac_vid = 0; + u8 idx = 0; + int ret; + + /* Convert the array into a 64-bit MAC */ + mac = ether_addr_to_u64(addr); + + /* Perform a read for the given MAC and VID */ + b53_write48(dev, B53_ARLIO_PAGE, B53_MAC_ADDR_IDX, mac); + b53_write16(dev, B53_ARLIO_PAGE, B53_VLAN_ID_IDX, vid); + + /* Issue a read operation for this MAC */ + ret = b53_arl_rw_op(dev, 1); + if (ret) + return ret; + + ret = b53_arl_read(dev, mac, vid, &ent, &idx); + + /* If this is a read, just finish now */ + if (op) + return ret; + + switch (ret) { + case -ETIMEDOUT: + return ret; + case -ENOSPC: + dev_dbg(dev->dev, "{%pM,%.4d} no space left in ARL\n", + addr, vid); + return is_valid ? ret : 0; + case -ENOENT: + /* We could not find a matching MAC, so reset to a new entry */ + dev_dbg(dev->dev, "{%pM,%.4d} not found, using idx: %d\n", + addr, vid, idx); + fwd_entry = 0; + break; + default: + dev_dbg(dev->dev, "{%pM,%.4d} found, using idx: %d\n", + addr, vid, idx); + break; + } + + /* For multicast address, the port is a bitmask and the validity + * is determined by having at least one port being still active + */ + if (!is_multicast_ether_addr(addr)) { + ent.port = port; + ent.is_valid = is_valid; + } else { + if (is_valid) + ent.port |= BIT(port); + else + ent.port &= ~BIT(port); + + ent.is_valid = !!(ent.port); + } + + ent.vid = vid; + ent.is_static = true; + ent.is_age = false; + memcpy(ent.mac, addr, ETH_ALEN); + b53_arl_from_entry(&mac_vid, &fwd_entry, &ent); + + b53_write64(dev, B53_ARLIO_PAGE, + B53_ARLTBL_MAC_VID_ENTRY(idx), mac_vid); + b53_write32(dev, B53_ARLIO_PAGE, + B53_ARLTBL_DATA_ENTRY(idx), fwd_entry); + + return b53_arl_rw_op(dev, 0); +} + +int b53_fdb_add(struct dsa_switch *ds, int port, + const unsigned char *addr, u16 vid, + struct dsa_db db) +{ + struct b53_device *priv = ds->priv; + int ret; + + /* 5325 and 5365 require some more massaging, but could + * be supported eventually + */ + if (is5325(priv) || is5365(priv)) + return -EOPNOTSUPP; + + mutex_lock(&priv->arl_mutex); + ret = b53_arl_op(priv, 0, port, addr, vid, true); + mutex_unlock(&priv->arl_mutex); + + return ret; +} +EXPORT_SYMBOL(b53_fdb_add); + +int b53_fdb_del(struct dsa_switch *ds, int port, + const unsigned char *addr, u16 vid, + struct dsa_db db) +{ + struct b53_device *priv = ds->priv; + int ret; + + mutex_lock(&priv->arl_mutex); + ret = b53_arl_op(priv, 0, port, addr, vid, false); + mutex_unlock(&priv->arl_mutex); + + return ret; +} +EXPORT_SYMBOL(b53_fdb_del); + +static int b53_arl_search_wait(struct b53_device *dev) +{ + unsigned int timeout = 1000; + u8 reg; + + do { + b53_read8(dev, B53_ARLIO_PAGE, B53_ARL_SRCH_CTL, ®); + if (!(reg & ARL_SRCH_STDN)) + return 0; + + if (reg & ARL_SRCH_VLID) + return 0; + + usleep_range(1000, 2000); + } while (timeout--); + + return -ETIMEDOUT; +} + +static void b53_arl_search_rd(struct b53_device *dev, u8 idx, + struct b53_arl_entry *ent) +{ + u64 mac_vid; + u32 fwd_entry; + + b53_read64(dev, B53_ARLIO_PAGE, + B53_ARL_SRCH_RSTL_MACVID(idx), &mac_vid); + b53_read32(dev, B53_ARLIO_PAGE, + B53_ARL_SRCH_RSTL(idx), &fwd_entry); + b53_arl_to_entry(ent, mac_vid, fwd_entry); +} + +static int b53_fdb_copy(int port, const struct b53_arl_entry *ent, + dsa_fdb_dump_cb_t *cb, void *data) +{ + if (!ent->is_valid) + return 0; + + if (port != ent->port) + return 0; + + return cb(ent->mac, ent->vid, ent->is_static, data); +} + +int b53_fdb_dump(struct dsa_switch *ds, int port, + dsa_fdb_dump_cb_t *cb, void *data) +{ + struct b53_device *priv = ds->priv; + struct b53_arl_entry results[2]; + unsigned int count = 0; + int ret; + u8 reg; + + mutex_lock(&priv->arl_mutex); + + /* Start search operation */ + reg = ARL_SRCH_STDN; + b53_write8(priv, B53_ARLIO_PAGE, B53_ARL_SRCH_CTL, reg); + + do { + ret = b53_arl_search_wait(priv); + if (ret) + break; + + b53_arl_search_rd(priv, 0, &results[0]); + ret = b53_fdb_copy(port, &results[0], cb, data); + if (ret) + break; + + if (priv->num_arl_bins > 2) { + b53_arl_search_rd(priv, 1, &results[1]); + ret = b53_fdb_copy(port, &results[1], cb, data); + if (ret) + break; + + if (!results[0].is_valid && !results[1].is_valid) + break; + } + + } while (count++ < b53_max_arl_entries(priv) / 2); + + mutex_unlock(&priv->arl_mutex); + + return 0; +} +EXPORT_SYMBOL(b53_fdb_dump); + +int b53_mdb_add(struct dsa_switch *ds, int port, + const struct switchdev_obj_port_mdb *mdb, + struct dsa_db db) +{ + struct b53_device *priv = ds->priv; + int ret; + + /* 5325 and 5365 require some more massaging, but could + * be supported eventually + */ + if (is5325(priv) || is5365(priv)) + return -EOPNOTSUPP; + + mutex_lock(&priv->arl_mutex); + ret = b53_arl_op(priv, 0, port, mdb->addr, mdb->vid, true); + mutex_unlock(&priv->arl_mutex); + + return ret; +} +EXPORT_SYMBOL(b53_mdb_add); + +int b53_mdb_del(struct dsa_switch *ds, int port, + const struct switchdev_obj_port_mdb *mdb, + struct dsa_db db) +{ + struct b53_device *priv = ds->priv; + int ret; + + mutex_lock(&priv->arl_mutex); + ret = b53_arl_op(priv, 0, port, mdb->addr, mdb->vid, false); + mutex_unlock(&priv->arl_mutex); + if (ret) + dev_err(ds->dev, "failed to delete MDB entry\n"); + + return ret; +} +EXPORT_SYMBOL(b53_mdb_del); + +int b53_br_join(struct dsa_switch *ds, int port, struct dsa_bridge bridge, + bool *tx_fwd_offload, struct netlink_ext_ack *extack) +{ + struct b53_device *dev = ds->priv; + s8 cpu_port = dsa_to_port(ds, port)->cpu_dp->index; + u16 pvlan, reg; + unsigned int i; + + /* On 7278, port 7 which connects to the ASP should only receive + * traffic from matching CFP rules. + */ + if (dev->chip_id == BCM7278_DEVICE_ID && port == 7) + return -EINVAL; + + /* Make this port leave the all VLANs join since we will have proper + * VLAN entries from now on + */ + if (is58xx(dev)) { + b53_read16(dev, B53_VLAN_PAGE, B53_JOIN_ALL_VLAN_EN, ®); + reg &= ~BIT(port); + if ((reg & BIT(cpu_port)) == BIT(cpu_port)) + reg &= ~BIT(cpu_port); + b53_write16(dev, B53_VLAN_PAGE, B53_JOIN_ALL_VLAN_EN, reg); + } + + b53_read16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(port), &pvlan); + + b53_for_each_port(dev, i) { + if (!dsa_port_offloads_bridge(dsa_to_port(ds, i), &bridge)) + continue; + + /* Add this local port to the remote port VLAN control + * membership and update the remote port bitmask + */ + b53_read16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(i), ®); + reg |= BIT(port); + b53_write16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(i), reg); + dev->ports[i].vlan_ctl_mask = reg; + + pvlan |= BIT(i); + } + + /* Configure the local port VLAN control membership to include + * remote ports and update the local port bitmask + */ + b53_write16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(port), pvlan); + dev->ports[port].vlan_ctl_mask = pvlan; + + return 0; +} +EXPORT_SYMBOL(b53_br_join); + +void b53_br_leave(struct dsa_switch *ds, int port, struct dsa_bridge bridge) +{ + struct b53_device *dev = ds->priv; + struct b53_vlan *vl = &dev->vlans[0]; + s8 cpu_port = dsa_to_port(ds, port)->cpu_dp->index; + unsigned int i; + u16 pvlan, reg, pvid; + + b53_read16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(port), &pvlan); + + b53_for_each_port(dev, i) { + /* Don't touch the remaining ports */ + if (!dsa_port_offloads_bridge(dsa_to_port(ds, i), &bridge)) + continue; + + b53_read16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(i), ®); + reg &= ~BIT(port); + b53_write16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(i), reg); + dev->ports[port].vlan_ctl_mask = reg; + + /* Prevent self removal to preserve isolation */ + if (port != i) + pvlan &= ~BIT(i); + } + + b53_write16(dev, B53_PVLAN_PAGE, B53_PVLAN_PORT_MASK(port), pvlan); + dev->ports[port].vlan_ctl_mask = pvlan; + + pvid = b53_default_pvid(dev); + + /* Make this port join all VLANs without VLAN entries */ + if (is58xx(dev)) { + b53_read16(dev, B53_VLAN_PAGE, B53_JOIN_ALL_VLAN_EN, ®); + reg |= BIT(port); + if (!(reg & BIT(cpu_port))) + reg |= BIT(cpu_port); + b53_write16(dev, B53_VLAN_PAGE, B53_JOIN_ALL_VLAN_EN, reg); + } else { + b53_get_vlan_entry(dev, pvid, vl); + vl->members |= BIT(port) | BIT(cpu_port); + vl->untag |= BIT(port) | BIT(cpu_port); + b53_set_vlan_entry(dev, pvid, vl); + } +} +EXPORT_SYMBOL(b53_br_leave); + +void b53_br_set_stp_state(struct dsa_switch *ds, int port, u8 state) +{ + struct b53_device *dev = ds->priv; + u8 hw_state; + u8 reg; + + switch (state) { + case BR_STATE_DISABLED: + hw_state = PORT_CTRL_DIS_STATE; + break; + case BR_STATE_LISTENING: + hw_state = PORT_CTRL_LISTEN_STATE; + break; + case BR_STATE_LEARNING: + hw_state = PORT_CTRL_LEARN_STATE; + break; + case BR_STATE_FORWARDING: + hw_state = PORT_CTRL_FWD_STATE; + break; + case BR_STATE_BLOCKING: + hw_state = PORT_CTRL_BLOCK_STATE; + break; + default: + dev_err(ds->dev, "invalid STP state: %d\n", state); + return; + } + + b53_read8(dev, B53_CTRL_PAGE, B53_PORT_CTRL(port), ®); + reg &= ~PORT_CTRL_STP_STATE_MASK; + reg |= hw_state; + b53_write8(dev, B53_CTRL_PAGE, B53_PORT_CTRL(port), reg); +} +EXPORT_SYMBOL(b53_br_set_stp_state); + +void b53_br_fast_age(struct dsa_switch *ds, int port) +{ + struct b53_device *dev = ds->priv; + + if (b53_fast_age_port(dev, port)) + dev_err(ds->dev, "fast ageing failed\n"); +} +EXPORT_SYMBOL(b53_br_fast_age); + +int b53_br_flags_pre(struct dsa_switch *ds, int port, + struct switchdev_brport_flags flags, + struct netlink_ext_ack *extack) +{ + if (flags.mask & ~(BR_FLOOD | BR_MCAST_FLOOD | BR_LEARNING)) + return -EINVAL; + + return 0; +} +EXPORT_SYMBOL(b53_br_flags_pre); + +int b53_br_flags(struct dsa_switch *ds, int port, + struct switchdev_brport_flags flags, + struct netlink_ext_ack *extack) +{ + if (flags.mask & BR_FLOOD) + b53_port_set_ucast_flood(ds->priv, port, + !!(flags.val & BR_FLOOD)); + if (flags.mask & BR_MCAST_FLOOD) + b53_port_set_mcast_flood(ds->priv, port, + !!(flags.val & BR_MCAST_FLOOD)); + if (flags.mask & BR_LEARNING) + b53_port_set_learning(ds->priv, port, + !!(flags.val & BR_LEARNING)); + + return 0; +} +EXPORT_SYMBOL(b53_br_flags); + +static bool b53_possible_cpu_port(struct dsa_switch *ds, int port) +{ + /* Broadcom switches will accept enabling Broadcom tags on the + * following ports: 5, 7 and 8, any other port is not supported + */ + switch (port) { + case B53_CPU_PORT_25: + case 7: + case B53_CPU_PORT: + return true; + } + + return false; +} + +static bool b53_can_enable_brcm_tags(struct dsa_switch *ds, int port, + enum dsa_tag_protocol tag_protocol) +{ + bool ret = b53_possible_cpu_port(ds, port); + + if (!ret) { + dev_warn(ds->dev, "Port %d is not Broadcom tag capable\n", + port); + return ret; + } + + switch (tag_protocol) { + case DSA_TAG_PROTO_BRCM: + case DSA_TAG_PROTO_BRCM_PREPEND: + dev_warn(ds->dev, + "Port %d is stacked to Broadcom tag switch\n", port); + ret = false; + break; + default: + ret = true; + break; + } + + return ret; +} + +enum dsa_tag_protocol b53_get_tag_protocol(struct dsa_switch *ds, int port, + enum dsa_tag_protocol mprot) +{ + struct b53_device *dev = ds->priv; + + if (!b53_can_enable_brcm_tags(ds, port, mprot)) { + dev->tag_protocol = DSA_TAG_PROTO_NONE; + goto out; + } + + /* Older models require a different 6 byte tag */ + if (is5325(dev) || is5365(dev) || is63xx(dev)) { + dev->tag_protocol = DSA_TAG_PROTO_BRCM_LEGACY; + goto out; + } + + /* Broadcom BCM58xx chips have a flow accelerator on Port 8 + * which requires us to use the prepended Broadcom tag type + */ + if (dev->chip_id == BCM58XX_DEVICE_ID && port == B53_CPU_PORT) { + dev->tag_protocol = DSA_TAG_PROTO_BRCM_PREPEND; + goto out; + } + + dev->tag_protocol = DSA_TAG_PROTO_BRCM; +out: + return dev->tag_protocol; +} +EXPORT_SYMBOL(b53_get_tag_protocol); + +int b53_mirror_add(struct dsa_switch *ds, int port, + struct dsa_mall_mirror_tc_entry *mirror, bool ingress, + struct netlink_ext_ack *extack) +{ + struct b53_device *dev = ds->priv; + u16 reg, loc; + + if (ingress) + loc = B53_IG_MIR_CTL; + else + loc = B53_EG_MIR_CTL; + + b53_read16(dev, B53_MGMT_PAGE, loc, ®); + reg |= BIT(port); + b53_write16(dev, B53_MGMT_PAGE, loc, reg); + + b53_read16(dev, B53_MGMT_PAGE, B53_MIR_CAP_CTL, ®); + reg &= ~CAP_PORT_MASK; + reg |= mirror->to_local_port; + reg |= MIRROR_EN; + b53_write16(dev, B53_MGMT_PAGE, B53_MIR_CAP_CTL, reg); + + return 0; +} +EXPORT_SYMBOL(b53_mirror_add); + +void b53_mirror_del(struct dsa_switch *ds, int port, + struct dsa_mall_mirror_tc_entry *mirror) +{ + struct b53_device *dev = ds->priv; + bool loc_disable = false, other_loc_disable = false; + u16 reg, loc; + + if (mirror->ingress) + loc = B53_IG_MIR_CTL; + else + loc = B53_EG_MIR_CTL; + + /* Update the desired ingress/egress register */ + b53_read16(dev, B53_MGMT_PAGE, loc, ®); + reg &= ~BIT(port); + if (!(reg & MIRROR_MASK)) + loc_disable = true; + b53_write16(dev, B53_MGMT_PAGE, loc, reg); + + /* Now look at the other one to know if we can disable mirroring + * entirely + */ + if (mirror->ingress) + b53_read16(dev, B53_MGMT_PAGE, B53_EG_MIR_CTL, ®); + else + b53_read16(dev, B53_MGMT_PAGE, B53_IG_MIR_CTL, ®); + if (!(reg & MIRROR_MASK)) + other_loc_disable = true; + + b53_read16(dev, B53_MGMT_PAGE, B53_MIR_CAP_CTL, ®); + /* Both no longer have ports, let's disable mirroring */ + if (loc_disable && other_loc_disable) { + reg &= ~MIRROR_EN; + reg &= ~mirror->to_local_port; + } + b53_write16(dev, B53_MGMT_PAGE, B53_MIR_CAP_CTL, reg); +} +EXPORT_SYMBOL(b53_mirror_del); + +void b53_eee_enable_set(struct dsa_switch *ds, int port, bool enable) +{ + struct b53_device *dev = ds->priv; + u16 reg; + + b53_read16(dev, B53_EEE_PAGE, B53_EEE_EN_CTRL, ®); + if (enable) + reg |= BIT(port); + else + reg &= ~BIT(port); + b53_write16(dev, B53_EEE_PAGE, B53_EEE_EN_CTRL, reg); +} +EXPORT_SYMBOL(b53_eee_enable_set); + + +/* Returns 0 if EEE was not enabled, or 1 otherwise + */ +int b53_eee_init(struct dsa_switch *ds, int port, struct phy_device *phy) +{ + int ret; + + ret = phy_init_eee(phy, false); + if (ret) + return 0; + + b53_eee_enable_set(ds, port, true); + + return 1; +} +EXPORT_SYMBOL(b53_eee_init); + +int b53_get_mac_eee(struct dsa_switch *ds, int port, struct ethtool_eee *e) +{ + struct b53_device *dev = ds->priv; + struct ethtool_eee *p = &dev->ports[port].eee; + u16 reg; + + if (is5325(dev) || is5365(dev)) + return -EOPNOTSUPP; + + b53_read16(dev, B53_EEE_PAGE, B53_EEE_LPI_INDICATE, ®); + e->eee_enabled = p->eee_enabled; + e->eee_active = !!(reg & BIT(port)); + + return 0; +} +EXPORT_SYMBOL(b53_get_mac_eee); + +int b53_set_mac_eee(struct dsa_switch *ds, int port, struct ethtool_eee *e) +{ + struct b53_device *dev = ds->priv; + struct ethtool_eee *p = &dev->ports[port].eee; + + if (is5325(dev) || is5365(dev)) + return -EOPNOTSUPP; + + p->eee_enabled = e->eee_enabled; + b53_eee_enable_set(ds, port, e->eee_enabled); + + return 0; +} +EXPORT_SYMBOL(b53_set_mac_eee); + +static int b53_change_mtu(struct dsa_switch *ds, int port, int mtu) +{ + struct b53_device *dev = ds->priv; + bool enable_jumbo; + bool allow_10_100; + + if (is5325(dev) || is5365(dev)) + return -EOPNOTSUPP; + + enable_jumbo = (mtu >= JMS_MIN_SIZE); + allow_10_100 = (dev->chip_id == BCM583XX_DEVICE_ID); + + return b53_set_jumbo(dev, enable_jumbo, allow_10_100); +} + +static int b53_get_max_mtu(struct dsa_switch *ds, int port) +{ + return JMS_MAX_SIZE; +} + +static const struct dsa_switch_ops b53_switch_ops = { + .get_tag_protocol = b53_get_tag_protocol, + .setup = b53_setup, + .teardown = b53_teardown, + .get_strings = b53_get_strings, + .get_ethtool_stats = b53_get_ethtool_stats, + .get_sset_count = b53_get_sset_count, + .get_ethtool_phy_stats = b53_get_ethtool_phy_stats, + .phy_read = b53_phy_read16, + .phy_write = b53_phy_write16, + .adjust_link = b53_adjust_link, + .phylink_get_caps = b53_phylink_get_caps, + .phylink_mac_select_pcs = b53_phylink_mac_select_pcs, + .phylink_mac_config = b53_phylink_mac_config, + .phylink_mac_link_down = b53_phylink_mac_link_down, + .phylink_mac_link_up = b53_phylink_mac_link_up, + .port_enable = b53_enable_port, + .port_disable = b53_disable_port, + .get_mac_eee = b53_get_mac_eee, + .set_mac_eee = b53_set_mac_eee, + .port_bridge_join = b53_br_join, + .port_bridge_leave = b53_br_leave, + .port_pre_bridge_flags = b53_br_flags_pre, + .port_bridge_flags = b53_br_flags, + .port_stp_state_set = b53_br_set_stp_state, + .port_fast_age = b53_br_fast_age, + .port_vlan_filtering = b53_vlan_filtering, + .port_vlan_add = b53_vlan_add, + .port_vlan_del = b53_vlan_del, + .port_fdb_dump = b53_fdb_dump, + .port_fdb_add = b53_fdb_add, + .port_fdb_del = b53_fdb_del, + .port_mirror_add = b53_mirror_add, + .port_mirror_del = b53_mirror_del, + .port_mdb_add = b53_mdb_add, + .port_mdb_del = b53_mdb_del, + .port_max_mtu = b53_get_max_mtu, + .port_change_mtu = b53_change_mtu, +}; + +struct b53_chip_data { + u32 chip_id; + const char *dev_name; + u16 vlans; + u16 enabled_ports; + u8 imp_port; + u8 cpu_port; + u8 vta_regs[3]; + u8 arl_bins; + u16 arl_buckets; + u8 duplex_reg; + u8 jumbo_pm_reg; + u8 jumbo_size_reg; +}; + +#define B53_VTA_REGS \ + { B53_VT_ACCESS, B53_VT_INDEX, B53_VT_ENTRY } +#define B53_VTA_REGS_9798 \ + { B53_VT_ACCESS_9798, B53_VT_INDEX_9798, B53_VT_ENTRY_9798 } +#define B53_VTA_REGS_63XX \ + { B53_VT_ACCESS_63XX, B53_VT_INDEX_63XX, B53_VT_ENTRY_63XX } + +static const struct b53_chip_data b53_switch_chips[] = { + { + .chip_id = BCM5325_DEVICE_ID, + .dev_name = "BCM5325", + .vlans = 16, + .enabled_ports = 0x3f, + .arl_bins = 2, + .arl_buckets = 1024, + .imp_port = 5, + .duplex_reg = B53_DUPLEX_STAT_FE, + }, + { + .chip_id = BCM5365_DEVICE_ID, + .dev_name = "BCM5365", + .vlans = 256, + .enabled_ports = 0x3f, + .arl_bins = 2, + .arl_buckets = 1024, + .imp_port = 5, + .duplex_reg = B53_DUPLEX_STAT_FE, + }, + { + .chip_id = BCM5389_DEVICE_ID, + .dev_name = "BCM5389", + .vlans = 4096, + .enabled_ports = 0x11f, + .arl_bins = 4, + .arl_buckets = 1024, + .imp_port = 8, + .vta_regs = B53_VTA_REGS, + .duplex_reg = B53_DUPLEX_STAT_GE, + .jumbo_pm_reg = B53_JUMBO_PORT_MASK, + .jumbo_size_reg = B53_JUMBO_MAX_SIZE, + }, + { + .chip_id = BCM5395_DEVICE_ID, + .dev_name = "BCM5395", + .vlans = 4096, + .enabled_ports = 0x11f, + .arl_bins = 4, + .arl_buckets = 1024, + .imp_port = 8, + .vta_regs = B53_VTA_REGS, + .duplex_reg = B53_DUPLEX_STAT_GE, + .jumbo_pm_reg = B53_JUMBO_PORT_MASK, + .jumbo_size_reg = B53_JUMBO_MAX_SIZE, + }, + { + .chip_id = BCM5397_DEVICE_ID, + .dev_name = "BCM5397", + .vlans = 4096, + .enabled_ports = 0x11f, + .arl_bins = 4, + .arl_buckets = 1024, + .imp_port = 8, + .vta_regs = B53_VTA_REGS_9798, + .duplex_reg = B53_DUPLEX_STAT_GE, + .jumbo_pm_reg = B53_JUMBO_PORT_MASK, + .jumbo_size_reg = B53_JUMBO_MAX_SIZE, + }, + { + .chip_id = BCM5398_DEVICE_ID, + .dev_name = "BCM5398", + .vlans = 4096, + .enabled_ports = 0x17f, + .arl_bins = 4, + .arl_buckets = 1024, + .imp_port = 8, + .vta_regs = B53_VTA_REGS_9798, + .duplex_reg = B53_DUPLEX_STAT_GE, + .jumbo_pm_reg = B53_JUMBO_PORT_MASK, + .jumbo_size_reg = B53_JUMBO_MAX_SIZE, + }, + { + .chip_id = BCM53115_DEVICE_ID, + .dev_name = "BCM53115", + .vlans = 4096, + .enabled_ports = 0x11f, + .arl_bins = 4, + .arl_buckets = 1024, + .vta_regs = B53_VTA_REGS, + .imp_port = 8, + .duplex_reg = B53_DUPLEX_STAT_GE, + .jumbo_pm_reg = B53_JUMBO_PORT_MASK, + .jumbo_size_reg = B53_JUMBO_MAX_SIZE, + }, + { + .chip_id = BCM53125_DEVICE_ID, + .dev_name = "BCM53125", + .vlans = 4096, + .enabled_ports = 0x1ff, + .arl_bins = 4, + .arl_buckets = 1024, + .imp_port = 8, + .vta_regs = B53_VTA_REGS, + .duplex_reg = B53_DUPLEX_STAT_GE, + .jumbo_pm_reg = B53_JUMBO_PORT_MASK, + .jumbo_size_reg = B53_JUMBO_MAX_SIZE, + }, + { + .chip_id = BCM53128_DEVICE_ID, + .dev_name = "BCM53128", + .vlans = 4096, + .enabled_ports = 0x1ff, + .arl_bins = 4, + .arl_buckets = 1024, + .imp_port = 8, + .vta_regs = B53_VTA_REGS, + .duplex_reg = B53_DUPLEX_STAT_GE, + .jumbo_pm_reg = B53_JUMBO_PORT_MASK, + .jumbo_size_reg = B53_JUMBO_MAX_SIZE, + }, + { + .chip_id = BCM63XX_DEVICE_ID, + .dev_name = "BCM63xx", + .vlans = 4096, + .enabled_ports = 0, /* pdata must provide them */ + .arl_bins = 4, + .arl_buckets = 1024, + .imp_port = 8, + .vta_regs = B53_VTA_REGS_63XX, + .duplex_reg = B53_DUPLEX_STAT_63XX, + .jumbo_pm_reg = B53_JUMBO_PORT_MASK_63XX, + .jumbo_size_reg = B53_JUMBO_MAX_SIZE_63XX, + }, + { + .chip_id = BCM63268_DEVICE_ID, + .dev_name = "BCM63268", + .vlans = 4096, + .enabled_ports = 0, /* pdata must provide them */ + .arl_bins = 4, + .arl_buckets = 1024, + .imp_port = 8, + .vta_regs = B53_VTA_REGS_63XX, + .duplex_reg = B53_DUPLEX_STAT_63XX, + .jumbo_pm_reg = B53_JUMBO_PORT_MASK_63XX, + .jumbo_size_reg = B53_JUMBO_MAX_SIZE_63XX, + }, + { + .chip_id = BCM53010_DEVICE_ID, + .dev_name = "BCM53010", + .vlans = 4096, + .enabled_ports = 0x1bf, + .arl_bins = 4, + .arl_buckets = 1024, + .imp_port = 8, + .vta_regs = B53_VTA_REGS, + .duplex_reg = B53_DUPLEX_STAT_GE, + .jumbo_pm_reg = B53_JUMBO_PORT_MASK, + .jumbo_size_reg = B53_JUMBO_MAX_SIZE, + }, + { + .chip_id = BCM53011_DEVICE_ID, + .dev_name = "BCM53011", + .vlans = 4096, + .enabled_ports = 0x1bf, + .arl_bins = 4, + .arl_buckets = 1024, + .imp_port = 8, + .vta_regs = B53_VTA_REGS, + .duplex_reg = B53_DUPLEX_STAT_GE, + .jumbo_pm_reg = B53_JUMBO_PORT_MASK, + .jumbo_size_reg = B53_JUMBO_MAX_SIZE, + }, + { + .chip_id = BCM53012_DEVICE_ID, + .dev_name = "BCM53012", + .vlans = 4096, + .enabled_ports = 0x1bf, + .arl_bins = 4, + .arl_buckets = 1024, + .imp_port = 8, + .vta_regs = B53_VTA_REGS, + .duplex_reg = B53_DUPLEX_STAT_GE, + .jumbo_pm_reg = B53_JUMBO_PORT_MASK, + .jumbo_size_reg = B53_JUMBO_MAX_SIZE, + }, + { + .chip_id = BCM53018_DEVICE_ID, + .dev_name = "BCM53018", + .vlans = 4096, + .enabled_ports = 0x1bf, + .arl_bins = 4, + .arl_buckets = 1024, + .imp_port = 8, + .vta_regs = B53_VTA_REGS, + .duplex_reg = B53_DUPLEX_STAT_GE, + .jumbo_pm_reg = B53_JUMBO_PORT_MASK, + .jumbo_size_reg = B53_JUMBO_MAX_SIZE, + }, + { + .chip_id = BCM53019_DEVICE_ID, + .dev_name = "BCM53019", + .vlans = 4096, + .enabled_ports = 0x1bf, + .arl_bins = 4, + .arl_buckets = 1024, + .imp_port = 8, + .vta_regs = B53_VTA_REGS, + .duplex_reg = B53_DUPLEX_STAT_GE, + .jumbo_pm_reg = B53_JUMBO_PORT_MASK, + .jumbo_size_reg = B53_JUMBO_MAX_SIZE, + }, + { + .chip_id = BCM58XX_DEVICE_ID, + .dev_name = "BCM585xx/586xx/88312", + .vlans = 4096, + .enabled_ports = 0x1ff, + .arl_bins = 4, + .arl_buckets = 1024, + .imp_port = 8, + .vta_regs = B53_VTA_REGS, + .duplex_reg = B53_DUPLEX_STAT_GE, + .jumbo_pm_reg = B53_JUMBO_PORT_MASK, + .jumbo_size_reg = B53_JUMBO_MAX_SIZE, + }, + { + .chip_id = BCM583XX_DEVICE_ID, + .dev_name = "BCM583xx/11360", + .vlans = 4096, + .enabled_ports = 0x103, + .arl_bins = 4, + .arl_buckets = 1024, + .imp_port = 8, + .vta_regs = B53_VTA_REGS, + .duplex_reg = B53_DUPLEX_STAT_GE, + .jumbo_pm_reg = B53_JUMBO_PORT_MASK, + .jumbo_size_reg = B53_JUMBO_MAX_SIZE, + }, + /* Starfighter 2 */ + { + .chip_id = BCM4908_DEVICE_ID, + .dev_name = "BCM4908", + .vlans = 4096, + .enabled_ports = 0x1bf, + .arl_bins = 4, + .arl_buckets = 256, + .imp_port = 8, + .vta_regs = B53_VTA_REGS, + .duplex_reg = B53_DUPLEX_STAT_GE, + .jumbo_pm_reg = B53_JUMBO_PORT_MASK, + .jumbo_size_reg = B53_JUMBO_MAX_SIZE, + }, + { + .chip_id = BCM7445_DEVICE_ID, + .dev_name = "BCM7445", + .vlans = 4096, + .enabled_ports = 0x1ff, + .arl_bins = 4, + .arl_buckets = 1024, + .imp_port = 8, + .vta_regs = B53_VTA_REGS, + .duplex_reg = B53_DUPLEX_STAT_GE, + .jumbo_pm_reg = B53_JUMBO_PORT_MASK, + .jumbo_size_reg = B53_JUMBO_MAX_SIZE, + }, + { + .chip_id = BCM7278_DEVICE_ID, + .dev_name = "BCM7278", + .vlans = 4096, + .enabled_ports = 0x1ff, + .arl_bins = 4, + .arl_buckets = 256, + .imp_port = 8, + .vta_regs = B53_VTA_REGS, + .duplex_reg = B53_DUPLEX_STAT_GE, + .jumbo_pm_reg = B53_JUMBO_PORT_MASK, + .jumbo_size_reg = B53_JUMBO_MAX_SIZE, + }, + { + .chip_id = BCM53134_DEVICE_ID, + .dev_name = "BCM53134", + .vlans = 4096, + .enabled_ports = 0x12f, + .imp_port = 8, + .cpu_port = B53_CPU_PORT, + .vta_regs = B53_VTA_REGS, + .arl_bins = 4, + .arl_buckets = 1024, + .duplex_reg = B53_DUPLEX_STAT_GE, + .jumbo_pm_reg = B53_JUMBO_PORT_MASK, + .jumbo_size_reg = B53_JUMBO_MAX_SIZE, + }, +}; + +static int b53_switch_init(struct b53_device *dev) +{ + unsigned int i; + int ret; + + for (i = 0; i < ARRAY_SIZE(b53_switch_chips); i++) { + const struct b53_chip_data *chip = &b53_switch_chips[i]; + + if (chip->chip_id == dev->chip_id) { + if (!dev->enabled_ports) + dev->enabled_ports = chip->enabled_ports; + dev->name = chip->dev_name; + dev->duplex_reg = chip->duplex_reg; + dev->vta_regs[0] = chip->vta_regs[0]; + dev->vta_regs[1] = chip->vta_regs[1]; + dev->vta_regs[2] = chip->vta_regs[2]; + dev->jumbo_pm_reg = chip->jumbo_pm_reg; + dev->imp_port = chip->imp_port; + dev->num_vlans = chip->vlans; + dev->num_arl_bins = chip->arl_bins; + dev->num_arl_buckets = chip->arl_buckets; + break; + } + } + + /* check which BCM5325x version we have */ + if (is5325(dev)) { + u8 vc4; + + b53_read8(dev, B53_VLAN_PAGE, B53_VLAN_CTRL4_25, &vc4); + + /* check reserved bits */ + switch (vc4 & 3) { + case 1: + /* BCM5325E */ + break; + case 3: + /* BCM5325F - do not use port 4 */ + dev->enabled_ports &= ~BIT(4); + break; + default: +/* On the BCM47XX SoCs this is the supported internal switch.*/ +#ifndef CONFIG_BCM47XX + /* BCM5325M */ + return -EINVAL; +#else + break; +#endif + } + } + + dev->num_ports = fls(dev->enabled_ports); + + dev->ds->num_ports = min_t(unsigned int, dev->num_ports, DSA_MAX_PORTS); + + /* Include non standard CPU port built-in PHYs to be probed */ + if (is539x(dev) || is531x5(dev)) { + for (i = 0; i < dev->num_ports; i++) { + if (!(dev->ds->phys_mii_mask & BIT(i)) && + !b53_possible_cpu_port(dev->ds, i)) + dev->ds->phys_mii_mask |= BIT(i); + } + } + + dev->ports = devm_kcalloc(dev->dev, + dev->num_ports, sizeof(struct b53_port), + GFP_KERNEL); + if (!dev->ports) + return -ENOMEM; + + dev->vlans = devm_kcalloc(dev->dev, + dev->num_vlans, sizeof(struct b53_vlan), + GFP_KERNEL); + if (!dev->vlans) + return -ENOMEM; + + dev->reset_gpio = b53_switch_get_reset_gpio(dev); + if (dev->reset_gpio >= 0) { + ret = devm_gpio_request_one(dev->dev, dev->reset_gpio, + GPIOF_OUT_INIT_HIGH, "robo_reset"); + if (ret) + return ret; + } + + return 0; +} + +struct b53_device *b53_switch_alloc(struct device *base, + const struct b53_io_ops *ops, + void *priv) +{ + struct dsa_switch *ds; + struct b53_device *dev; + + ds = devm_kzalloc(base, sizeof(*ds), GFP_KERNEL); + if (!ds) + return NULL; + + ds->dev = base; + + dev = devm_kzalloc(base, sizeof(*dev), GFP_KERNEL); + if (!dev) + return NULL; + + ds->priv = dev; + dev->dev = base; + + dev->ds = ds; + dev->priv = priv; + dev->ops = ops; + ds->ops = &b53_switch_ops; + dev->vlan_enabled = true; + /* Let DSA handle the case were multiple bridges span the same switch + * device and different VLAN awareness settings are requested, which + * would be breaking filtering semantics for any of the other bridge + * devices. (not hardware supported) + */ + ds->vlan_filtering_is_global = true; + + mutex_init(&dev->reg_mutex); + mutex_init(&dev->stats_mutex); + mutex_init(&dev->arl_mutex); + + return dev; +} +EXPORT_SYMBOL(b53_switch_alloc); + +int b53_switch_detect(struct b53_device *dev) +{ + u32 id32; + u16 tmp; + u8 id8; + int ret; + + ret = b53_read8(dev, B53_MGMT_PAGE, B53_DEVICE_ID, &id8); + if (ret) + return ret; + + switch (id8) { + case 0: + /* BCM5325 and BCM5365 do not have this register so reads + * return 0. But the read operation did succeed, so assume this + * is one of them. + * + * Next check if we can write to the 5325's VTA register; for + * 5365 it is read only. + */ + b53_write16(dev, B53_VLAN_PAGE, B53_VLAN_TABLE_ACCESS_25, 0xf); + b53_read16(dev, B53_VLAN_PAGE, B53_VLAN_TABLE_ACCESS_25, &tmp); + + if (tmp == 0xf) + dev->chip_id = BCM5325_DEVICE_ID; + else + dev->chip_id = BCM5365_DEVICE_ID; + break; + case BCM5389_DEVICE_ID: + case BCM5395_DEVICE_ID: + case BCM5397_DEVICE_ID: + case BCM5398_DEVICE_ID: + dev->chip_id = id8; + break; + default: + ret = b53_read32(dev, B53_MGMT_PAGE, B53_DEVICE_ID, &id32); + if (ret) + return ret; + + switch (id32) { + case BCM53115_DEVICE_ID: + case BCM53125_DEVICE_ID: + case BCM53128_DEVICE_ID: + case BCM53010_DEVICE_ID: + case BCM53011_DEVICE_ID: + case BCM53012_DEVICE_ID: + case BCM53018_DEVICE_ID: + case BCM53019_DEVICE_ID: + case BCM53134_DEVICE_ID: + dev->chip_id = id32; + break; + default: + dev_err(dev->dev, + "unsupported switch detected (BCM53%02x/BCM%x)\n", + id8, id32); + return -ENODEV; + } + } + + if (dev->chip_id == BCM5325_DEVICE_ID) + return b53_read8(dev, B53_STAT_PAGE, B53_REV_ID_25, + &dev->core_rev); + else + return b53_read8(dev, B53_MGMT_PAGE, B53_REV_ID, + &dev->core_rev); +} +EXPORT_SYMBOL(b53_switch_detect); + +int b53_switch_register(struct b53_device *dev) +{ + int ret; + + if (dev->pdata) { + dev->chip_id = dev->pdata->chip_id; + dev->enabled_ports = dev->pdata->enabled_ports; + } + + if (!dev->chip_id && b53_switch_detect(dev)) + return -EINVAL; + + ret = b53_switch_init(dev); + if (ret) + return ret; + + dev_info(dev->dev, "found switch: %s, rev %i\n", + dev->name, dev->core_rev); + + return dsa_register_switch(dev->ds); +} +EXPORT_SYMBOL(b53_switch_register); + +MODULE_AUTHOR("Jonas Gorski <jogo@openwrt.org>"); +MODULE_DESCRIPTION("B53 switch library"); +MODULE_LICENSE("Dual BSD/GPL"); |