diff options
Diffstat (limited to 'drivers/net/dsa/microchip/ksz8795.c')
| -rw-r--r-- | drivers/net/dsa/microchip/ksz8795.c | 1479 |
1 files changed, 1479 insertions, 0 deletions
diff --git a/drivers/net/dsa/microchip/ksz8795.c b/drivers/net/dsa/microchip/ksz8795.c new file mode 100644 index 0000000000..91aba470fb --- /dev/null +++ b/drivers/net/dsa/microchip/ksz8795.c @@ -0,0 +1,1479 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Microchip KSZ8795 switch driver + * + * Copyright (C) 2017 Microchip Technology Inc. + * Tristram Ha <Tristram.Ha@microchip.com> + */ + +#include <linux/bitfield.h> +#include <linux/delay.h> +#include <linux/export.h> +#include <linux/gpio.h> +#include <linux/if_vlan.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/platform_data/microchip-ksz.h> +#include <linux/phy.h> +#include <linux/etherdevice.h> +#include <linux/if_bridge.h> +#include <linux/micrel_phy.h> +#include <net/dsa.h> +#include <net/switchdev.h> +#include <linux/phylink.h> + +#include "ksz_common.h" +#include "ksz8795_reg.h" +#include "ksz8.h" + +static void ksz_cfg(struct ksz_device *dev, u32 addr, u8 bits, bool set) +{ + regmap_update_bits(ksz_regmap_8(dev), addr, bits, set ? bits : 0); +} + +static void ksz_port_cfg(struct ksz_device *dev, int port, int offset, u8 bits, + bool set) +{ + regmap_update_bits(ksz_regmap_8(dev), PORT_CTRL_ADDR(port, offset), + bits, set ? bits : 0); +} + +static int ksz8_ind_write8(struct ksz_device *dev, u8 table, u16 addr, u8 data) +{ + const u16 *regs; + u16 ctrl_addr; + int ret = 0; + + regs = dev->info->regs; + + mutex_lock(&dev->alu_mutex); + + ctrl_addr = IND_ACC_TABLE(table) | addr; + ret = ksz_write8(dev, regs[REG_IND_BYTE], data); + if (!ret) + ret = ksz_write16(dev, regs[REG_IND_CTRL_0], ctrl_addr); + + mutex_unlock(&dev->alu_mutex); + + return ret; +} + +int ksz8_reset_switch(struct ksz_device *dev) +{ + if (ksz_is_ksz88x3(dev)) { + /* reset switch */ + ksz_cfg(dev, KSZ8863_REG_SW_RESET, + KSZ8863_GLOBAL_SOFTWARE_RESET | KSZ8863_PCS_RESET, true); + ksz_cfg(dev, KSZ8863_REG_SW_RESET, + KSZ8863_GLOBAL_SOFTWARE_RESET | KSZ8863_PCS_RESET, false); + } else { + /* reset switch */ + ksz_write8(dev, REG_POWER_MANAGEMENT_1, + SW_SOFTWARE_POWER_DOWN << SW_POWER_MANAGEMENT_MODE_S); + ksz_write8(dev, REG_POWER_MANAGEMENT_1, 0); + } + + return 0; +} + +static int ksz8863_change_mtu(struct ksz_device *dev, int frame_size) +{ + u8 ctrl2 = 0; + + if (frame_size <= KSZ8_LEGAL_PACKET_SIZE) + ctrl2 |= KSZ8863_LEGAL_PACKET_ENABLE; + else if (frame_size > KSZ8863_NORMAL_PACKET_SIZE) + ctrl2 |= KSZ8863_HUGE_PACKET_ENABLE; + + return ksz_rmw8(dev, REG_SW_CTRL_2, KSZ8863_LEGAL_PACKET_ENABLE | + KSZ8863_HUGE_PACKET_ENABLE, ctrl2); +} + +static int ksz8795_change_mtu(struct ksz_device *dev, int frame_size) +{ + u8 ctrl1 = 0, ctrl2 = 0; + int ret; + + if (frame_size > KSZ8_LEGAL_PACKET_SIZE) + ctrl2 |= SW_LEGAL_PACKET_DISABLE; + if (frame_size > KSZ8863_NORMAL_PACKET_SIZE) + ctrl1 |= SW_HUGE_PACKET; + + ret = ksz_rmw8(dev, REG_SW_CTRL_1, SW_HUGE_PACKET, ctrl1); + if (ret) + return ret; + + return ksz_rmw8(dev, REG_SW_CTRL_2, SW_LEGAL_PACKET_DISABLE, ctrl2); +} + +int ksz8_change_mtu(struct ksz_device *dev, int port, int mtu) +{ + u16 frame_size; + + if (!dsa_is_cpu_port(dev->ds, port)) + return 0; + + frame_size = mtu + VLAN_ETH_HLEN + ETH_FCS_LEN; + + switch (dev->chip_id) { + case KSZ8795_CHIP_ID: + case KSZ8794_CHIP_ID: + case KSZ8765_CHIP_ID: + return ksz8795_change_mtu(dev, frame_size); + case KSZ8830_CHIP_ID: + return ksz8863_change_mtu(dev, frame_size); + } + + return -EOPNOTSUPP; +} + +static void ksz8795_set_prio_queue(struct ksz_device *dev, int port, int queue) +{ + u8 hi, lo; + + /* Number of queues can only be 1, 2, or 4. */ + switch (queue) { + case 4: + case 3: + queue = PORT_QUEUE_SPLIT_4; + break; + case 2: + queue = PORT_QUEUE_SPLIT_2; + break; + default: + queue = PORT_QUEUE_SPLIT_1; + } + ksz_pread8(dev, port, REG_PORT_CTRL_0, &lo); + ksz_pread8(dev, port, P_DROP_TAG_CTRL, &hi); + lo &= ~PORT_QUEUE_SPLIT_L; + if (queue & PORT_QUEUE_SPLIT_2) + lo |= PORT_QUEUE_SPLIT_L; + hi &= ~PORT_QUEUE_SPLIT_H; + if (queue & PORT_QUEUE_SPLIT_4) + hi |= PORT_QUEUE_SPLIT_H; + ksz_pwrite8(dev, port, REG_PORT_CTRL_0, lo); + ksz_pwrite8(dev, port, P_DROP_TAG_CTRL, hi); + + /* Default is port based for egress rate limit. */ + if (queue != PORT_QUEUE_SPLIT_1) + ksz_cfg(dev, REG_SW_CTRL_19, SW_OUT_RATE_LIMIT_QUEUE_BASED, + true); +} + +void ksz8_r_mib_cnt(struct ksz_device *dev, int port, u16 addr, u64 *cnt) +{ + const u32 *masks; + const u16 *regs; + u16 ctrl_addr; + u32 data; + u8 check; + int loop; + + masks = dev->info->masks; + regs = dev->info->regs; + + ctrl_addr = addr + dev->info->reg_mib_cnt * port; + ctrl_addr |= IND_ACC_TABLE(TABLE_MIB | TABLE_READ); + + mutex_lock(&dev->alu_mutex); + ksz_write16(dev, regs[REG_IND_CTRL_0], ctrl_addr); + + /* It is almost guaranteed to always read the valid bit because of + * slow SPI speed. + */ + for (loop = 2; loop > 0; loop--) { + ksz_read8(dev, regs[REG_IND_MIB_CHECK], &check); + + if (check & masks[MIB_COUNTER_VALID]) { + ksz_read32(dev, regs[REG_IND_DATA_LO], &data); + if (check & masks[MIB_COUNTER_OVERFLOW]) + *cnt += MIB_COUNTER_VALUE + 1; + *cnt += data & MIB_COUNTER_VALUE; + break; + } + } + mutex_unlock(&dev->alu_mutex); +} + +static void ksz8795_r_mib_pkt(struct ksz_device *dev, int port, u16 addr, + u64 *dropped, u64 *cnt) +{ + const u32 *masks; + const u16 *regs; + u16 ctrl_addr; + u32 data; + u8 check; + int loop; + + masks = dev->info->masks; + regs = dev->info->regs; + + addr -= dev->info->reg_mib_cnt; + ctrl_addr = (KSZ8795_MIB_TOTAL_RX_1 - KSZ8795_MIB_TOTAL_RX_0) * port; + ctrl_addr += addr + KSZ8795_MIB_TOTAL_RX_0; + ctrl_addr |= IND_ACC_TABLE(TABLE_MIB | TABLE_READ); + + mutex_lock(&dev->alu_mutex); + ksz_write16(dev, regs[REG_IND_CTRL_0], ctrl_addr); + + /* It is almost guaranteed to always read the valid bit because of + * slow SPI speed. + */ + for (loop = 2; loop > 0; loop--) { + ksz_read8(dev, regs[REG_IND_MIB_CHECK], &check); + + if (check & masks[MIB_COUNTER_VALID]) { + ksz_read32(dev, regs[REG_IND_DATA_LO], &data); + if (addr < 2) { + u64 total; + + total = check & MIB_TOTAL_BYTES_H; + total <<= 32; + *cnt += total; + *cnt += data; + if (check & masks[MIB_COUNTER_OVERFLOW]) { + total = MIB_TOTAL_BYTES_H + 1; + total <<= 32; + *cnt += total; + } + } else { + if (check & masks[MIB_COUNTER_OVERFLOW]) + *cnt += MIB_PACKET_DROPPED + 1; + *cnt += data & MIB_PACKET_DROPPED; + } + break; + } + } + mutex_unlock(&dev->alu_mutex); +} + +static void ksz8863_r_mib_pkt(struct ksz_device *dev, int port, u16 addr, + u64 *dropped, u64 *cnt) +{ + u32 *last = (u32 *)dropped; + const u16 *regs; + u16 ctrl_addr; + u32 data; + u32 cur; + + regs = dev->info->regs; + + addr -= dev->info->reg_mib_cnt; + ctrl_addr = addr ? KSZ8863_MIB_PACKET_DROPPED_TX_0 : + KSZ8863_MIB_PACKET_DROPPED_RX_0; + ctrl_addr += port; + ctrl_addr |= IND_ACC_TABLE(TABLE_MIB | TABLE_READ); + + mutex_lock(&dev->alu_mutex); + ksz_write16(dev, regs[REG_IND_CTRL_0], ctrl_addr); + ksz_read32(dev, regs[REG_IND_DATA_LO], &data); + mutex_unlock(&dev->alu_mutex); + + data &= MIB_PACKET_DROPPED; + cur = last[addr]; + if (data != cur) { + last[addr] = data; + if (data < cur) + data += MIB_PACKET_DROPPED + 1; + data -= cur; + *cnt += data; + } +} + +void ksz8_r_mib_pkt(struct ksz_device *dev, int port, u16 addr, + u64 *dropped, u64 *cnt) +{ + if (ksz_is_ksz88x3(dev)) + ksz8863_r_mib_pkt(dev, port, addr, dropped, cnt); + else + ksz8795_r_mib_pkt(dev, port, addr, dropped, cnt); +} + +void ksz8_freeze_mib(struct ksz_device *dev, int port, bool freeze) +{ + if (ksz_is_ksz88x3(dev)) + return; + + /* enable the port for flush/freeze function */ + if (freeze) + ksz_cfg(dev, REG_SW_CTRL_6, BIT(port), true); + ksz_cfg(dev, REG_SW_CTRL_6, SW_MIB_COUNTER_FREEZE, freeze); + + /* disable the port after freeze is done */ + if (!freeze) + ksz_cfg(dev, REG_SW_CTRL_6, BIT(port), false); +} + +void ksz8_port_init_cnt(struct ksz_device *dev, int port) +{ + struct ksz_port_mib *mib = &dev->ports[port].mib; + u64 *dropped; + + if (!ksz_is_ksz88x3(dev)) { + /* flush all enabled port MIB counters */ + ksz_cfg(dev, REG_SW_CTRL_6, BIT(port), true); + ksz_cfg(dev, REG_SW_CTRL_6, SW_MIB_COUNTER_FLUSH, true); + ksz_cfg(dev, REG_SW_CTRL_6, BIT(port), false); + } + + mib->cnt_ptr = 0; + + /* Some ports may not have MIB counters before SWITCH_COUNTER_NUM. */ + while (mib->cnt_ptr < dev->info->reg_mib_cnt) { + dev->dev_ops->r_mib_cnt(dev, port, mib->cnt_ptr, + &mib->counters[mib->cnt_ptr]); + ++mib->cnt_ptr; + } + + /* last one in storage */ + dropped = &mib->counters[dev->info->mib_cnt]; + + /* Some ports may not have MIB counters after SWITCH_COUNTER_NUM. */ + while (mib->cnt_ptr < dev->info->mib_cnt) { + dev->dev_ops->r_mib_pkt(dev, port, mib->cnt_ptr, + dropped, &mib->counters[mib->cnt_ptr]); + ++mib->cnt_ptr; + } +} + +static int ksz8_r_table(struct ksz_device *dev, int table, u16 addr, u64 *data) +{ + const u16 *regs; + u16 ctrl_addr; + int ret; + + regs = dev->info->regs; + + ctrl_addr = IND_ACC_TABLE(table | TABLE_READ) | addr; + + mutex_lock(&dev->alu_mutex); + ret = ksz_write16(dev, regs[REG_IND_CTRL_0], ctrl_addr); + if (ret) + goto unlock_alu; + + ret = ksz_read64(dev, regs[REG_IND_DATA_HI], data); +unlock_alu: + mutex_unlock(&dev->alu_mutex); + + return ret; +} + +static int ksz8_w_table(struct ksz_device *dev, int table, u16 addr, u64 data) +{ + const u16 *regs; + u16 ctrl_addr; + int ret; + + regs = dev->info->regs; + + ctrl_addr = IND_ACC_TABLE(table) | addr; + + mutex_lock(&dev->alu_mutex); + ret = ksz_write64(dev, regs[REG_IND_DATA_HI], data); + if (ret) + goto unlock_alu; + + ret = ksz_write16(dev, regs[REG_IND_CTRL_0], ctrl_addr); +unlock_alu: + mutex_unlock(&dev->alu_mutex); + + return ret; +} + +static int ksz8_valid_dyn_entry(struct ksz_device *dev, u8 *data) +{ + int timeout = 100; + const u32 *masks; + const u16 *regs; + + masks = dev->info->masks; + regs = dev->info->regs; + + do { + ksz_read8(dev, regs[REG_IND_DATA_CHECK], data); + timeout--; + } while ((*data & masks[DYNAMIC_MAC_TABLE_NOT_READY]) && timeout); + + /* Entry is not ready for accessing. */ + if (*data & masks[DYNAMIC_MAC_TABLE_NOT_READY]) { + return -EAGAIN; + /* Entry is ready for accessing. */ + } else { + ksz_read8(dev, regs[REG_IND_DATA_8], data); + + /* There is no valid entry in the table. */ + if (*data & masks[DYNAMIC_MAC_TABLE_MAC_EMPTY]) + return -ENXIO; + } + return 0; +} + +int ksz8_r_dyn_mac_table(struct ksz_device *dev, u16 addr, u8 *mac_addr, + u8 *fid, u8 *src_port, u8 *timestamp, u16 *entries) +{ + u32 data_hi, data_lo; + const u8 *shifts; + const u32 *masks; + const u16 *regs; + u16 ctrl_addr; + u8 data; + int rc; + + shifts = dev->info->shifts; + masks = dev->info->masks; + regs = dev->info->regs; + + ctrl_addr = IND_ACC_TABLE(TABLE_DYNAMIC_MAC | TABLE_READ) | addr; + + mutex_lock(&dev->alu_mutex); + ksz_write16(dev, regs[REG_IND_CTRL_0], ctrl_addr); + + rc = ksz8_valid_dyn_entry(dev, &data); + if (rc == -EAGAIN) { + if (addr == 0) + *entries = 0; + } else if (rc == -ENXIO) { + *entries = 0; + /* At least one valid entry in the table. */ + } else { + u64 buf = 0; + int cnt; + + ksz_read64(dev, regs[REG_IND_DATA_HI], &buf); + data_hi = (u32)(buf >> 32); + data_lo = (u32)buf; + + /* Check out how many valid entry in the table. */ + cnt = data & masks[DYNAMIC_MAC_TABLE_ENTRIES_H]; + cnt <<= shifts[DYNAMIC_MAC_ENTRIES_H]; + cnt |= (data_hi & masks[DYNAMIC_MAC_TABLE_ENTRIES]) >> + shifts[DYNAMIC_MAC_ENTRIES]; + *entries = cnt + 1; + + *fid = (data_hi & masks[DYNAMIC_MAC_TABLE_FID]) >> + shifts[DYNAMIC_MAC_FID]; + *src_port = (data_hi & masks[DYNAMIC_MAC_TABLE_SRC_PORT]) >> + shifts[DYNAMIC_MAC_SRC_PORT]; + *timestamp = (data_hi & masks[DYNAMIC_MAC_TABLE_TIMESTAMP]) >> + shifts[DYNAMIC_MAC_TIMESTAMP]; + + mac_addr[5] = (u8)data_lo; + mac_addr[4] = (u8)(data_lo >> 8); + mac_addr[3] = (u8)(data_lo >> 16); + mac_addr[2] = (u8)(data_lo >> 24); + + mac_addr[1] = (u8)data_hi; + mac_addr[0] = (u8)(data_hi >> 8); + rc = 0; + } + mutex_unlock(&dev->alu_mutex); + + return rc; +} + +static int ksz8_r_sta_mac_table(struct ksz_device *dev, u16 addr, + struct alu_struct *alu, bool *valid) +{ + u32 data_hi, data_lo; + const u8 *shifts; + const u32 *masks; + u64 data; + int ret; + + shifts = dev->info->shifts; + masks = dev->info->masks; + + ret = ksz8_r_table(dev, TABLE_STATIC_MAC, addr, &data); + if (ret) + return ret; + + data_hi = data >> 32; + data_lo = (u32)data; + + if (!(data_hi & (masks[STATIC_MAC_TABLE_VALID] | + masks[STATIC_MAC_TABLE_OVERRIDE]))) { + *valid = false; + return 0; + } + + alu->mac[5] = (u8)data_lo; + alu->mac[4] = (u8)(data_lo >> 8); + alu->mac[3] = (u8)(data_lo >> 16); + alu->mac[2] = (u8)(data_lo >> 24); + alu->mac[1] = (u8)data_hi; + alu->mac[0] = (u8)(data_hi >> 8); + alu->port_forward = + (data_hi & masks[STATIC_MAC_TABLE_FWD_PORTS]) >> + shifts[STATIC_MAC_FWD_PORTS]; + alu->is_override = (data_hi & masks[STATIC_MAC_TABLE_OVERRIDE]) ? 1 : 0; + + /* KSZ8795 family switches have STATIC_MAC_TABLE_USE_FID and + * STATIC_MAC_TABLE_FID definitions off by 1 when doing read on the + * static MAC table compared to doing write. + */ + if (ksz_is_ksz87xx(dev)) + data_hi >>= 1; + alu->is_static = true; + alu->is_use_fid = (data_hi & masks[STATIC_MAC_TABLE_USE_FID]) ? 1 : 0; + alu->fid = (data_hi & masks[STATIC_MAC_TABLE_FID]) >> + shifts[STATIC_MAC_FID]; + + *valid = true; + + return 0; +} + +static int ksz8_w_sta_mac_table(struct ksz_device *dev, u16 addr, + struct alu_struct *alu) +{ + u32 data_hi, data_lo; + const u8 *shifts; + const u32 *masks; + u64 data; + + shifts = dev->info->shifts; + masks = dev->info->masks; + + data_lo = ((u32)alu->mac[2] << 24) | + ((u32)alu->mac[3] << 16) | + ((u32)alu->mac[4] << 8) | alu->mac[5]; + data_hi = ((u32)alu->mac[0] << 8) | alu->mac[1]; + data_hi |= (u32)alu->port_forward << shifts[STATIC_MAC_FWD_PORTS]; + + if (alu->is_override) + data_hi |= masks[STATIC_MAC_TABLE_OVERRIDE]; + if (alu->is_use_fid) { + data_hi |= masks[STATIC_MAC_TABLE_USE_FID]; + data_hi |= (u32)alu->fid << shifts[STATIC_MAC_FID]; + } + if (alu->is_static) + data_hi |= masks[STATIC_MAC_TABLE_VALID]; + else + data_hi &= ~masks[STATIC_MAC_TABLE_OVERRIDE]; + + data = (u64)data_hi << 32 | data_lo; + + return ksz8_w_table(dev, TABLE_STATIC_MAC, addr, data); +} + +static void ksz8_from_vlan(struct ksz_device *dev, u32 vlan, u8 *fid, + u8 *member, u8 *valid) +{ + const u8 *shifts; + const u32 *masks; + + shifts = dev->info->shifts; + masks = dev->info->masks; + + *fid = vlan & masks[VLAN_TABLE_FID]; + *member = (vlan & masks[VLAN_TABLE_MEMBERSHIP]) >> + shifts[VLAN_TABLE_MEMBERSHIP_S]; + *valid = !!(vlan & masks[VLAN_TABLE_VALID]); +} + +static void ksz8_to_vlan(struct ksz_device *dev, u8 fid, u8 member, u8 valid, + u16 *vlan) +{ + const u8 *shifts; + const u32 *masks; + + shifts = dev->info->shifts; + masks = dev->info->masks; + + *vlan = fid; + *vlan |= (u16)member << shifts[VLAN_TABLE_MEMBERSHIP_S]; + if (valid) + *vlan |= masks[VLAN_TABLE_VALID]; +} + +static void ksz8_r_vlan_entries(struct ksz_device *dev, u16 addr) +{ + const u8 *shifts; + u64 data; + int i; + + shifts = dev->info->shifts; + + ksz8_r_table(dev, TABLE_VLAN, addr, &data); + addr *= 4; + for (i = 0; i < 4; i++) { + dev->vlan_cache[addr + i].table[0] = (u16)data; + data >>= shifts[VLAN_TABLE]; + } +} + +static void ksz8_r_vlan_table(struct ksz_device *dev, u16 vid, u16 *vlan) +{ + int index; + u16 *data; + u16 addr; + u64 buf; + + data = (u16 *)&buf; + addr = vid / 4; + index = vid & 3; + ksz8_r_table(dev, TABLE_VLAN, addr, &buf); + *vlan = data[index]; +} + +static void ksz8_w_vlan_table(struct ksz_device *dev, u16 vid, u16 vlan) +{ + int index; + u16 *data; + u16 addr; + u64 buf; + + data = (u16 *)&buf; + addr = vid / 4; + index = vid & 3; + ksz8_r_table(dev, TABLE_VLAN, addr, &buf); + data[index] = vlan; + dev->vlan_cache[vid].table[0] = vlan; + ksz8_w_table(dev, TABLE_VLAN, addr, buf); +} + +int ksz8_r_phy(struct ksz_device *dev, u16 phy, u16 reg, u16 *val) +{ + u8 restart, speed, ctrl, link; + int processed = true; + const u16 *regs; + u8 val1, val2; + u16 data = 0; + u8 p = phy; + int ret; + + regs = dev->info->regs; + + switch (reg) { + case MII_BMCR: + ret = ksz_pread8(dev, p, regs[P_NEG_RESTART_CTRL], &restart); + if (ret) + return ret; + + ret = ksz_pread8(dev, p, regs[P_SPEED_STATUS], &speed); + if (ret) + return ret; + + ret = ksz_pread8(dev, p, regs[P_FORCE_CTRL], &ctrl); + if (ret) + return ret; + + if (restart & PORT_PHY_LOOPBACK) + data |= BMCR_LOOPBACK; + if (ctrl & PORT_FORCE_100_MBIT) + data |= BMCR_SPEED100; + if (ksz_is_ksz88x3(dev)) { + if ((ctrl & PORT_AUTO_NEG_ENABLE)) + data |= BMCR_ANENABLE; + } else { + if (!(ctrl & PORT_AUTO_NEG_DISABLE)) + data |= BMCR_ANENABLE; + } + if (restart & PORT_POWER_DOWN) + data |= BMCR_PDOWN; + if (restart & PORT_AUTO_NEG_RESTART) + data |= BMCR_ANRESTART; + if (ctrl & PORT_FORCE_FULL_DUPLEX) + data |= BMCR_FULLDPLX; + if (speed & PORT_HP_MDIX) + data |= KSZ886X_BMCR_HP_MDIX; + if (restart & PORT_FORCE_MDIX) + data |= KSZ886X_BMCR_FORCE_MDI; + if (restart & PORT_AUTO_MDIX_DISABLE) + data |= KSZ886X_BMCR_DISABLE_AUTO_MDIX; + if (restart & PORT_TX_DISABLE) + data |= KSZ886X_BMCR_DISABLE_TRANSMIT; + if (restart & PORT_LED_OFF) + data |= KSZ886X_BMCR_DISABLE_LED; + break; + case MII_BMSR: + ret = ksz_pread8(dev, p, regs[P_LINK_STATUS], &link); + if (ret) + return ret; + + data = BMSR_100FULL | + BMSR_100HALF | + BMSR_10FULL | + BMSR_10HALF | + BMSR_ANEGCAPABLE; + if (link & PORT_AUTO_NEG_COMPLETE) + data |= BMSR_ANEGCOMPLETE; + if (link & PORT_STAT_LINK_GOOD) + data |= BMSR_LSTATUS; + break; + case MII_PHYSID1: + data = KSZ8795_ID_HI; + break; + case MII_PHYSID2: + if (ksz_is_ksz88x3(dev)) + data = KSZ8863_ID_LO; + else + data = KSZ8795_ID_LO; + break; + case MII_ADVERTISE: + ret = ksz_pread8(dev, p, regs[P_LOCAL_CTRL], &ctrl); + if (ret) + return ret; + + data = ADVERTISE_CSMA; + if (ctrl & PORT_AUTO_NEG_SYM_PAUSE) + data |= ADVERTISE_PAUSE_CAP; + if (ctrl & PORT_AUTO_NEG_100BTX_FD) + data |= ADVERTISE_100FULL; + if (ctrl & PORT_AUTO_NEG_100BTX) + data |= ADVERTISE_100HALF; + if (ctrl & PORT_AUTO_NEG_10BT_FD) + data |= ADVERTISE_10FULL; + if (ctrl & PORT_AUTO_NEG_10BT) + data |= ADVERTISE_10HALF; + break; + case MII_LPA: + ret = ksz_pread8(dev, p, regs[P_REMOTE_STATUS], &link); + if (ret) + return ret; + + data = LPA_SLCT; + if (link & PORT_REMOTE_SYM_PAUSE) + data |= LPA_PAUSE_CAP; + if (link & PORT_REMOTE_100BTX_FD) + data |= LPA_100FULL; + if (link & PORT_REMOTE_100BTX) + data |= LPA_100HALF; + if (link & PORT_REMOTE_10BT_FD) + data |= LPA_10FULL; + if (link & PORT_REMOTE_10BT) + data |= LPA_10HALF; + if (data & ~LPA_SLCT) + data |= LPA_LPACK; + break; + case PHY_REG_LINK_MD: + ret = ksz_pread8(dev, p, REG_PORT_LINK_MD_CTRL, &val1); + if (ret) + return ret; + + ret = ksz_pread8(dev, p, REG_PORT_LINK_MD_RESULT, &val2); + if (ret) + return ret; + + if (val1 & PORT_START_CABLE_DIAG) + data |= PHY_START_CABLE_DIAG; + + if (val1 & PORT_CABLE_10M_SHORT) + data |= PHY_CABLE_10M_SHORT; + + data |= FIELD_PREP(PHY_CABLE_DIAG_RESULT_M, + FIELD_GET(PORT_CABLE_DIAG_RESULT_M, val1)); + + data |= FIELD_PREP(PHY_CABLE_FAULT_COUNTER_M, + (FIELD_GET(PORT_CABLE_FAULT_COUNTER_H, val1) << 8) | + FIELD_GET(PORT_CABLE_FAULT_COUNTER_L, val2)); + break; + case PHY_REG_PHY_CTRL: + ret = ksz_pread8(dev, p, regs[P_LINK_STATUS], &link); + if (ret) + return ret; + + if (link & PORT_MDIX_STATUS) + data |= KSZ886X_CTRL_MDIX_STAT; + break; + default: + processed = false; + break; + } + if (processed) + *val = data; + + return 0; +} + +int ksz8_w_phy(struct ksz_device *dev, u16 phy, u16 reg, u16 val) +{ + u8 restart, speed, ctrl, data; + const u16 *regs; + u8 p = phy; + int ret; + + regs = dev->info->regs; + + switch (reg) { + case MII_BMCR: + + /* Do not support PHY reset function. */ + if (val & BMCR_RESET) + break; + ret = ksz_pread8(dev, p, regs[P_SPEED_STATUS], &speed); + if (ret) + return ret; + + data = speed; + if (val & KSZ886X_BMCR_HP_MDIX) + data |= PORT_HP_MDIX; + else + data &= ~PORT_HP_MDIX; + + if (data != speed) { + ret = ksz_pwrite8(dev, p, regs[P_SPEED_STATUS], data); + if (ret) + return ret; + } + + ret = ksz_pread8(dev, p, regs[P_FORCE_CTRL], &ctrl); + if (ret) + return ret; + + data = ctrl; + if (ksz_is_ksz88x3(dev)) { + if ((val & BMCR_ANENABLE)) + data |= PORT_AUTO_NEG_ENABLE; + else + data &= ~PORT_AUTO_NEG_ENABLE; + } else { + if (!(val & BMCR_ANENABLE)) + data |= PORT_AUTO_NEG_DISABLE; + else + data &= ~PORT_AUTO_NEG_DISABLE; + + /* Fiber port does not support auto-negotiation. */ + if (dev->ports[p].fiber) + data |= PORT_AUTO_NEG_DISABLE; + } + + if (val & BMCR_SPEED100) + data |= PORT_FORCE_100_MBIT; + else + data &= ~PORT_FORCE_100_MBIT; + if (val & BMCR_FULLDPLX) + data |= PORT_FORCE_FULL_DUPLEX; + else + data &= ~PORT_FORCE_FULL_DUPLEX; + + if (data != ctrl) { + ret = ksz_pwrite8(dev, p, regs[P_FORCE_CTRL], data); + if (ret) + return ret; + } + + ret = ksz_pread8(dev, p, regs[P_NEG_RESTART_CTRL], &restart); + if (ret) + return ret; + + data = restart; + if (val & KSZ886X_BMCR_DISABLE_LED) + data |= PORT_LED_OFF; + else + data &= ~PORT_LED_OFF; + if (val & KSZ886X_BMCR_DISABLE_TRANSMIT) + data |= PORT_TX_DISABLE; + else + data &= ~PORT_TX_DISABLE; + if (val & BMCR_ANRESTART) + data |= PORT_AUTO_NEG_RESTART; + else + data &= ~(PORT_AUTO_NEG_RESTART); + if (val & BMCR_PDOWN) + data |= PORT_POWER_DOWN; + else + data &= ~PORT_POWER_DOWN; + if (val & KSZ886X_BMCR_DISABLE_AUTO_MDIX) + data |= PORT_AUTO_MDIX_DISABLE; + else + data &= ~PORT_AUTO_MDIX_DISABLE; + if (val & KSZ886X_BMCR_FORCE_MDI) + data |= PORT_FORCE_MDIX; + else + data &= ~PORT_FORCE_MDIX; + if (val & BMCR_LOOPBACK) + data |= PORT_PHY_LOOPBACK; + else + data &= ~PORT_PHY_LOOPBACK; + + if (data != restart) { + ret = ksz_pwrite8(dev, p, regs[P_NEG_RESTART_CTRL], + data); + if (ret) + return ret; + } + break; + case MII_ADVERTISE: + ret = ksz_pread8(dev, p, regs[P_LOCAL_CTRL], &ctrl); + if (ret) + return ret; + + data = ctrl; + data &= ~(PORT_AUTO_NEG_SYM_PAUSE | + PORT_AUTO_NEG_100BTX_FD | + PORT_AUTO_NEG_100BTX | + PORT_AUTO_NEG_10BT_FD | + PORT_AUTO_NEG_10BT); + if (val & ADVERTISE_PAUSE_CAP) + data |= PORT_AUTO_NEG_SYM_PAUSE; + if (val & ADVERTISE_100FULL) + data |= PORT_AUTO_NEG_100BTX_FD; + if (val & ADVERTISE_100HALF) + data |= PORT_AUTO_NEG_100BTX; + if (val & ADVERTISE_10FULL) + data |= PORT_AUTO_NEG_10BT_FD; + if (val & ADVERTISE_10HALF) + data |= PORT_AUTO_NEG_10BT; + + if (data != ctrl) { + ret = ksz_pwrite8(dev, p, regs[P_LOCAL_CTRL], data); + if (ret) + return ret; + } + break; + case PHY_REG_LINK_MD: + if (val & PHY_START_CABLE_DIAG) + ksz_port_cfg(dev, p, REG_PORT_LINK_MD_CTRL, PORT_START_CABLE_DIAG, true); + break; + default: + break; + } + + return 0; +} + +void ksz8_cfg_port_member(struct ksz_device *dev, int port, u8 member) +{ + u8 data; + + ksz_pread8(dev, port, P_MIRROR_CTRL, &data); + data &= ~PORT_VLAN_MEMBERSHIP; + data |= (member & dev->port_mask); + ksz_pwrite8(dev, port, P_MIRROR_CTRL, data); +} + +void ksz8_flush_dyn_mac_table(struct ksz_device *dev, int port) +{ + u8 learn[DSA_MAX_PORTS]; + int first, index, cnt; + const u16 *regs; + + regs = dev->info->regs; + + if ((uint)port < dev->info->port_cnt) { + first = port; + cnt = port + 1; + } else { + /* Flush all ports. */ + first = 0; + cnt = dev->info->port_cnt; + } + for (index = first; index < cnt; index++) { + ksz_pread8(dev, index, regs[P_STP_CTRL], &learn[index]); + if (!(learn[index] & PORT_LEARN_DISABLE)) + ksz_pwrite8(dev, index, regs[P_STP_CTRL], + learn[index] | PORT_LEARN_DISABLE); + } + ksz_cfg(dev, S_FLUSH_TABLE_CTRL, SW_FLUSH_DYN_MAC_TABLE, true); + for (index = first; index < cnt; index++) { + if (!(learn[index] & PORT_LEARN_DISABLE)) + ksz_pwrite8(dev, index, regs[P_STP_CTRL], learn[index]); + } +} + +int ksz8_fdb_dump(struct ksz_device *dev, int port, + dsa_fdb_dump_cb_t *cb, void *data) +{ + int ret = 0; + u16 i = 0; + u16 entries = 0; + u8 timestamp = 0; + u8 fid; + u8 src_port; + u8 mac[ETH_ALEN]; + + do { + ret = ksz8_r_dyn_mac_table(dev, i, mac, &fid, &src_port, + ×tamp, &entries); + if (!ret && port == src_port) { + ret = cb(mac, fid, false, data); + if (ret) + break; + } + i++; + } while (i < entries); + if (i >= entries) + ret = 0; + + return ret; +} + +static int ksz8_add_sta_mac(struct ksz_device *dev, int port, + const unsigned char *addr, u16 vid) +{ + struct alu_struct alu; + int index, ret; + int empty = 0; + + alu.port_forward = 0; + for (index = 0; index < dev->info->num_statics; index++) { + bool valid; + + ret = ksz8_r_sta_mac_table(dev, index, &alu, &valid); + if (ret) + return ret; + if (!valid) { + /* Remember the first empty entry. */ + if (!empty) + empty = index + 1; + continue; + } + + if (!memcmp(alu.mac, addr, ETH_ALEN) && alu.fid == vid) + break; + } + + /* no available entry */ + if (index == dev->info->num_statics && !empty) + return -ENOSPC; + + /* add entry */ + if (index == dev->info->num_statics) { + index = empty - 1; + memset(&alu, 0, sizeof(alu)); + memcpy(alu.mac, addr, ETH_ALEN); + alu.is_static = true; + } + alu.port_forward |= BIT(port); + if (vid) { + alu.is_use_fid = true; + + /* Need a way to map VID to FID. */ + alu.fid = vid; + } + + return ksz8_w_sta_mac_table(dev, index, &alu); +} + +static int ksz8_del_sta_mac(struct ksz_device *dev, int port, + const unsigned char *addr, u16 vid) +{ + struct alu_struct alu; + int index, ret; + + for (index = 0; index < dev->info->num_statics; index++) { + bool valid; + + ret = ksz8_r_sta_mac_table(dev, index, &alu, &valid); + if (ret) + return ret; + if (!valid) + continue; + + if (!memcmp(alu.mac, addr, ETH_ALEN) && alu.fid == vid) + break; + } + + /* no available entry */ + if (index == dev->info->num_statics) + return 0; + + /* clear port */ + alu.port_forward &= ~BIT(port); + if (!alu.port_forward) + alu.is_static = false; + + return ksz8_w_sta_mac_table(dev, index, &alu); +} + +int ksz8_mdb_add(struct ksz_device *dev, int port, + const struct switchdev_obj_port_mdb *mdb, struct dsa_db db) +{ + return ksz8_add_sta_mac(dev, port, mdb->addr, mdb->vid); +} + +int ksz8_mdb_del(struct ksz_device *dev, int port, + const struct switchdev_obj_port_mdb *mdb, struct dsa_db db) +{ + return ksz8_del_sta_mac(dev, port, mdb->addr, mdb->vid); +} + +int ksz8_fdb_add(struct ksz_device *dev, int port, const unsigned char *addr, + u16 vid, struct dsa_db db) +{ + return ksz8_add_sta_mac(dev, port, addr, vid); +} + +int ksz8_fdb_del(struct ksz_device *dev, int port, const unsigned char *addr, + u16 vid, struct dsa_db db) +{ + return ksz8_del_sta_mac(dev, port, addr, vid); +} + +int ksz8_port_vlan_filtering(struct ksz_device *dev, int port, bool flag, + struct netlink_ext_ack *extack) +{ + if (ksz_is_ksz88x3(dev)) + return -ENOTSUPP; + + /* Discard packets with VID not enabled on the switch */ + ksz_cfg(dev, S_MIRROR_CTRL, SW_VLAN_ENABLE, flag); + + /* Discard packets with VID not enabled on the ingress port */ + for (port = 0; port < dev->phy_port_cnt; ++port) + ksz_port_cfg(dev, port, REG_PORT_CTRL_2, PORT_INGRESS_FILTER, + flag); + + return 0; +} + +static void ksz8_port_enable_pvid(struct ksz_device *dev, int port, bool state) +{ + if (ksz_is_ksz88x3(dev)) { + ksz_cfg(dev, REG_SW_INSERT_SRC_PVID, + 0x03 << (4 - 2 * port), state); + } else { + ksz_pwrite8(dev, port, REG_PORT_CTRL_12, state ? 0x0f : 0x00); + } +} + +int ksz8_port_vlan_add(struct ksz_device *dev, int port, + const struct switchdev_obj_port_vlan *vlan, + struct netlink_ext_ack *extack) +{ + bool untagged = vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED; + struct ksz_port *p = &dev->ports[port]; + u16 data, new_pvid = 0; + u8 fid, member, valid; + + if (ksz_is_ksz88x3(dev)) + return -ENOTSUPP; + + /* If a VLAN is added with untagged flag different from the + * port's Remove Tag flag, we need to change the latter. + * Ignore VID 0, which is always untagged. + * Ignore CPU port, which will always be tagged. + */ + if (untagged != p->remove_tag && vlan->vid != 0 && + port != dev->cpu_port) { + unsigned int vid; + + /* Reject attempts to add a VLAN that requires the + * Remove Tag flag to be changed, unless there are no + * other VLANs currently configured. + */ + for (vid = 1; vid < dev->info->num_vlans; ++vid) { + /* Skip the VID we are going to add or reconfigure */ + if (vid == vlan->vid) + continue; + + ksz8_from_vlan(dev, dev->vlan_cache[vid].table[0], + &fid, &member, &valid); + if (valid && (member & BIT(port))) + return -EINVAL; + } + + ksz_port_cfg(dev, port, P_TAG_CTRL, PORT_REMOVE_TAG, untagged); + p->remove_tag = untagged; + } + + ksz8_r_vlan_table(dev, vlan->vid, &data); + ksz8_from_vlan(dev, data, &fid, &member, &valid); + + /* First time to setup the VLAN entry. */ + if (!valid) { + /* Need to find a way to map VID to FID. */ + fid = 1; + valid = 1; + } + member |= BIT(port); + + ksz8_to_vlan(dev, fid, member, valid, &data); + ksz8_w_vlan_table(dev, vlan->vid, data); + + /* change PVID */ + if (vlan->flags & BRIDGE_VLAN_INFO_PVID) + new_pvid = vlan->vid; + + if (new_pvid) { + u16 vid; + + ksz_pread16(dev, port, REG_PORT_CTRL_VID, &vid); + vid &= ~VLAN_VID_MASK; + vid |= new_pvid; + ksz_pwrite16(dev, port, REG_PORT_CTRL_VID, vid); + + ksz8_port_enable_pvid(dev, port, true); + } + + return 0; +} + +int ksz8_port_vlan_del(struct ksz_device *dev, int port, + const struct switchdev_obj_port_vlan *vlan) +{ + u16 data, pvid; + u8 fid, member, valid; + + if (ksz_is_ksz88x3(dev)) + return -ENOTSUPP; + + ksz_pread16(dev, port, REG_PORT_CTRL_VID, &pvid); + pvid = pvid & 0xFFF; + + ksz8_r_vlan_table(dev, vlan->vid, &data); + ksz8_from_vlan(dev, data, &fid, &member, &valid); + + member &= ~BIT(port); + + /* Invalidate the entry if no more member. */ + if (!member) { + fid = 0; + valid = 0; + } + + ksz8_to_vlan(dev, fid, member, valid, &data); + ksz8_w_vlan_table(dev, vlan->vid, data); + + if (pvid == vlan->vid) + ksz8_port_enable_pvid(dev, port, false); + + return 0; +} + +int ksz8_port_mirror_add(struct ksz_device *dev, int port, + struct dsa_mall_mirror_tc_entry *mirror, + bool ingress, struct netlink_ext_ack *extack) +{ + if (ingress) { + ksz_port_cfg(dev, port, P_MIRROR_CTRL, PORT_MIRROR_RX, true); + dev->mirror_rx |= BIT(port); + } else { + ksz_port_cfg(dev, port, P_MIRROR_CTRL, PORT_MIRROR_TX, true); + dev->mirror_tx |= BIT(port); + } + + ksz_port_cfg(dev, port, P_MIRROR_CTRL, PORT_MIRROR_SNIFFER, false); + + /* configure mirror port */ + if (dev->mirror_rx || dev->mirror_tx) + ksz_port_cfg(dev, mirror->to_local_port, P_MIRROR_CTRL, + PORT_MIRROR_SNIFFER, true); + + return 0; +} + +void ksz8_port_mirror_del(struct ksz_device *dev, int port, + struct dsa_mall_mirror_tc_entry *mirror) +{ + u8 data; + + if (mirror->ingress) { + ksz_port_cfg(dev, port, P_MIRROR_CTRL, PORT_MIRROR_RX, false); + dev->mirror_rx &= ~BIT(port); + } else { + ksz_port_cfg(dev, port, P_MIRROR_CTRL, PORT_MIRROR_TX, false); + dev->mirror_tx &= ~BIT(port); + } + + ksz_pread8(dev, port, P_MIRROR_CTRL, &data); + + if (!dev->mirror_rx && !dev->mirror_tx) + ksz_port_cfg(dev, mirror->to_local_port, P_MIRROR_CTRL, + PORT_MIRROR_SNIFFER, false); +} + +static void ksz8795_cpu_interface_select(struct ksz_device *dev, int port) +{ + struct ksz_port *p = &dev->ports[port]; + + if (!p->interface && dev->compat_interface) { + dev_warn(dev->dev, + "Using legacy switch \"phy-mode\" property, because it is missing on port %d node. " + "Please update your device tree.\n", + port); + p->interface = dev->compat_interface; + } +} + +void ksz8_port_setup(struct ksz_device *dev, int port, bool cpu_port) +{ + struct dsa_switch *ds = dev->ds; + const u32 *masks; + u8 member; + + masks = dev->info->masks; + + /* enable broadcast storm limit */ + ksz_port_cfg(dev, port, P_BCAST_STORM_CTRL, PORT_BROADCAST_STORM, true); + + if (!ksz_is_ksz88x3(dev)) + ksz8795_set_prio_queue(dev, port, 4); + + /* disable DiffServ priority */ + ksz_port_cfg(dev, port, P_PRIO_CTRL, PORT_DIFFSERV_ENABLE, false); + + /* replace priority */ + ksz_port_cfg(dev, port, P_802_1P_CTRL, + masks[PORT_802_1P_REMAPPING], false); + + /* enable 802.1p priority */ + ksz_port_cfg(dev, port, P_PRIO_CTRL, PORT_802_1P_ENABLE, true); + + if (cpu_port) { + if (!ksz_is_ksz88x3(dev)) + ksz8795_cpu_interface_select(dev, port); + + member = dsa_user_ports(ds); + } else { + member = BIT(dsa_upstream_port(ds, port)); + } + + ksz8_cfg_port_member(dev, port, member); +} + +void ksz8_config_cpu_port(struct dsa_switch *ds) +{ + struct ksz_device *dev = ds->priv; + struct ksz_port *p; + const u32 *masks; + const u16 *regs; + u8 remote; + int i; + + masks = dev->info->masks; + regs = dev->info->regs; + + ksz_cfg(dev, regs[S_TAIL_TAG_CTRL], masks[SW_TAIL_TAG_ENABLE], true); + + ksz8_port_setup(dev, dev->cpu_port, true); + + for (i = 0; i < dev->phy_port_cnt; i++) { + ksz_port_stp_state_set(ds, i, BR_STATE_DISABLED); + } + for (i = 0; i < dev->phy_port_cnt; i++) { + p = &dev->ports[i]; + + if (!ksz_is_ksz88x3(dev)) { + ksz_pread8(dev, i, regs[P_REMOTE_STATUS], &remote); + if (remote & KSZ8_PORT_FIBER_MODE) + p->fiber = 1; + } + if (p->fiber) + ksz_port_cfg(dev, i, regs[P_STP_CTRL], + PORT_FORCE_FLOW_CTRL, true); + else + ksz_port_cfg(dev, i, regs[P_STP_CTRL], + PORT_FORCE_FLOW_CTRL, false); + } +} + +static int ksz8_handle_global_errata(struct dsa_switch *ds) +{ + struct ksz_device *dev = ds->priv; + int ret = 0; + + /* KSZ87xx Errata DS80000687C. + * Module 2: Link drops with some EEE link partners. + * An issue with the EEE next page exchange between the + * KSZ879x/KSZ877x/KSZ876x and some EEE link partners may result in + * the link dropping. + */ + if (dev->info->ksz87xx_eee_link_erratum) + ret = ksz8_ind_write8(dev, TABLE_EEE, REG_IND_EEE_GLOB2_HI, 0); + + return ret; +} + +int ksz8_enable_stp_addr(struct ksz_device *dev) +{ + struct alu_struct alu; + + /* Setup STP address for STP operation. */ + memset(&alu, 0, sizeof(alu)); + ether_addr_copy(alu.mac, eth_stp_addr); + alu.is_static = true; + alu.is_override = true; + alu.port_forward = dev->info->cpu_ports; + + return ksz8_w_sta_mac_table(dev, 0, &alu); +} + +int ksz8_setup(struct dsa_switch *ds) +{ + struct ksz_device *dev = ds->priv; + int i; + + ds->mtu_enforcement_ingress = true; + + /* We rely on software untagging on the CPU port, so that we + * can support both tagged and untagged VLANs + */ + ds->untag_bridge_pvid = true; + + /* VLAN filtering is partly controlled by the global VLAN + * Enable flag + */ + ds->vlan_filtering_is_global = true; + + ksz_cfg(dev, S_REPLACE_VID_CTRL, SW_FLOW_CTRL, true); + + /* Enable automatic fast aging when link changed detected. */ + ksz_cfg(dev, S_LINK_AGING_CTRL, SW_LINK_AUTO_AGING, true); + + /* Enable aggressive back off algorithm in half duplex mode. */ + regmap_update_bits(ksz_regmap_8(dev), REG_SW_CTRL_1, + SW_AGGR_BACKOFF, SW_AGGR_BACKOFF); + + /* + * Make sure unicast VLAN boundary is set as default and + * enable no excessive collision drop. + */ + regmap_update_bits(ksz_regmap_8(dev), REG_SW_CTRL_2, + UNICAST_VLAN_BOUNDARY | NO_EXC_COLLISION_DROP, + UNICAST_VLAN_BOUNDARY | NO_EXC_COLLISION_DROP); + + ksz_cfg(dev, S_REPLACE_VID_CTRL, SW_REPLACE_VID, false); + + ksz_cfg(dev, S_MIRROR_CTRL, SW_MIRROR_RX_TX, false); + + if (!ksz_is_ksz88x3(dev)) + ksz_cfg(dev, REG_SW_CTRL_19, SW_INS_TAG_ENABLE, true); + + for (i = 0; i < (dev->info->num_vlans / 4); i++) + ksz8_r_vlan_entries(dev, i); + + return ksz8_handle_global_errata(ds); +} + +void ksz8_get_caps(struct ksz_device *dev, int port, + struct phylink_config *config) +{ + config->mac_capabilities = MAC_10 | MAC_100; + + /* Silicon Errata Sheet (DS80000830A): + * "Port 1 does not respond to received flow control PAUSE frames" + * So, disable Pause support on "Port 1" (port == 0) for all ksz88x3 + * switches. + */ + if (!ksz_is_ksz88x3(dev) || port) + config->mac_capabilities |= MAC_SYM_PAUSE; + + /* Asym pause is not supported on KSZ8863 and KSZ8873 */ + if (!ksz_is_ksz88x3(dev)) + config->mac_capabilities |= MAC_ASYM_PAUSE; +} + +u32 ksz8_get_port_addr(int port, int offset) +{ + return PORT_CTRL_ADDR(port, offset); +} + +int ksz8_switch_init(struct ksz_device *dev) +{ + dev->cpu_port = fls(dev->info->cpu_ports) - 1; + dev->phy_port_cnt = dev->info->port_cnt - 1; + dev->port_mask = (BIT(dev->phy_port_cnt) - 1) | dev->info->cpu_ports; + + return 0; +} + +void ksz8_switch_exit(struct ksz_device *dev) +{ + ksz8_reset_switch(dev); +} + +MODULE_AUTHOR("Tristram Ha <Tristram.Ha@microchip.com>"); +MODULE_DESCRIPTION("Microchip KSZ8795 Series Switch DSA Driver"); +MODULE_LICENSE("GPL"); |