diff options
Diffstat (limited to 'drivers/net/dsa/microchip/ksz8795.c')
| -rw-r--r-- | drivers/net/dsa/microchip/ksz8795.c | 86 |
1 files changed, 83 insertions, 3 deletions
diff --git a/drivers/net/dsa/microchip/ksz8795.c b/drivers/net/dsa/microchip/ksz8795.c index 91aba470fb..4bf4d67557 100644 --- a/drivers/net/dsa/microchip/ksz8795.c +++ b/drivers/net/dsa/microchip/ksz8795.c @@ -632,6 +632,50 @@ static void ksz8_w_vlan_table(struct ksz_device *dev, u16 vid, u16 vlan) ksz8_w_table(dev, TABLE_VLAN, addr, buf); } +/** + * ksz8_r_phy_ctrl - Translates and reads from the SMI interface to a MIIM PHY + * Control register (Reg. 31). + * @dev: The KSZ device instance. + * @port: The port number to be read. + * @val: The value read from the SMI interface. + * + * This function reads the SMI interface and translates the hardware register + * bit values into their corresponding control settings for a MIIM PHY Control + * register. + * + * Return: 0 on success, error code on failure. + */ +static int ksz8_r_phy_ctrl(struct ksz_device *dev, int port, u16 *val) +{ + const u16 *regs = dev->info->regs; + u8 reg_val; + int ret; + + *val = 0; + + ret = ksz_pread8(dev, port, regs[P_LINK_STATUS], ®_val); + if (ret < 0) + return ret; + + if (reg_val & PORT_MDIX_STATUS) + *val |= KSZ886X_CTRL_MDIX_STAT; + + ret = ksz_pread8(dev, port, REG_PORT_LINK_MD_CTRL, ®_val); + if (ret < 0) + return ret; + + if (reg_val & PORT_FORCE_LINK) + *val |= KSZ886X_CTRL_FORCE_LINK; + + if (reg_val & PORT_POWER_SAVING) + *val |= KSZ886X_CTRL_PWRSAVE; + + if (reg_val & PORT_PHY_REMOTE_LOOPBACK) + *val |= KSZ886X_CTRL_REMOTE_LOOPBACK; + + return 0; +} + int ksz8_r_phy(struct ksz_device *dev, u16 phy, u16 reg, u16 *val) { u8 restart, speed, ctrl, link; @@ -769,12 +813,10 @@ int ksz8_r_phy(struct ksz_device *dev, u16 phy, u16 reg, u16 *val) FIELD_GET(PORT_CABLE_FAULT_COUNTER_L, val2)); break; case PHY_REG_PHY_CTRL: - ret = ksz_pread8(dev, p, regs[P_LINK_STATUS], &link); + ret = ksz8_r_phy_ctrl(dev, p, &data); if (ret) return ret; - if (link & PORT_MDIX_STATUS) - data |= KSZ886X_CTRL_MDIX_STAT; break; default: processed = false; @@ -786,6 +828,38 @@ int ksz8_r_phy(struct ksz_device *dev, u16 phy, u16 reg, u16 *val) return 0; } +/** + * ksz8_w_phy_ctrl - Translates and writes to the SMI interface from a MIIM PHY + * Control register (Reg. 31). + * @dev: The KSZ device instance. + * @port: The port number to be configured. + * @val: The register value to be written. + * + * This function translates control settings from a MIIM PHY Control register + * into their corresponding hardware register bit values for the SMI + * interface. + * + * Return: 0 on success, error code on failure. + */ +static int ksz8_w_phy_ctrl(struct ksz_device *dev, int port, u16 val) +{ + u8 reg_val = 0; + int ret; + + if (val & KSZ886X_CTRL_FORCE_LINK) + reg_val |= PORT_FORCE_LINK; + + if (val & KSZ886X_CTRL_PWRSAVE) + reg_val |= PORT_POWER_SAVING; + + if (val & KSZ886X_CTRL_REMOTE_LOOPBACK) + reg_val |= PORT_PHY_REMOTE_LOOPBACK; + + ret = ksz_prmw8(dev, port, REG_PORT_LINK_MD_CTRL, PORT_FORCE_LINK | + PORT_POWER_SAVING | PORT_PHY_REMOTE_LOOPBACK, reg_val); + return ret; +} + int ksz8_w_phy(struct ksz_device *dev, u16 phy, u16 reg, u16 val) { u8 restart, speed, ctrl, data; @@ -926,6 +1000,12 @@ int ksz8_w_phy(struct ksz_device *dev, u16 phy, u16 reg, u16 val) if (val & PHY_START_CABLE_DIAG) ksz_port_cfg(dev, p, REG_PORT_LINK_MD_CTRL, PORT_START_CABLE_DIAG, true); break; + + case PHY_REG_PHY_CTRL: + ret = ksz8_w_phy_ctrl(dev, p, val); + if (ret) + return ret; + break; default: break; } |