diff options
Diffstat (limited to 'drivers/net/dsa/microchip/ksz9477.c')
| -rw-r--r-- | drivers/net/dsa/microchip/ksz9477.c | 1171 |
1 files changed, 1171 insertions, 0 deletions
diff --git a/drivers/net/dsa/microchip/ksz9477.c b/drivers/net/dsa/microchip/ksz9477.c new file mode 100644 index 0000000000..83b7f2d5c1 --- /dev/null +++ b/drivers/net/dsa/microchip/ksz9477.c @@ -0,0 +1,1171 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Microchip KSZ9477 switch driver main logic + * + * Copyright (C) 2017-2019 Microchip Technology Inc. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/iopoll.h> +#include <linux/platform_data/microchip-ksz.h> +#include <linux/phy.h> +#include <linux/if_bridge.h> +#include <linux/if_vlan.h> +#include <net/dsa.h> +#include <net/switchdev.h> + +#include "ksz9477_reg.h" +#include "ksz_common.h" +#include "ksz9477.h" + +static void ksz_cfg(struct ksz_device *dev, u32 addr, u8 bits, bool set) +{ + regmap_update_bits(ksz_regmap_8(dev), addr, bits, set ? bits : 0); +} + +static void ksz_port_cfg(struct ksz_device *dev, int port, int offset, u8 bits, + bool set) +{ + regmap_update_bits(ksz_regmap_8(dev), PORT_CTRL_ADDR(port, offset), + bits, set ? bits : 0); +} + +static void ksz9477_cfg32(struct ksz_device *dev, u32 addr, u32 bits, bool set) +{ + regmap_update_bits(ksz_regmap_32(dev), addr, bits, set ? bits : 0); +} + +static void ksz9477_port_cfg32(struct ksz_device *dev, int port, int offset, + u32 bits, bool set) +{ + regmap_update_bits(ksz_regmap_32(dev), PORT_CTRL_ADDR(port, offset), + bits, set ? bits : 0); +} + +int ksz9477_change_mtu(struct ksz_device *dev, int port, int mtu) +{ + u16 frame_size; + + if (!dsa_is_cpu_port(dev->ds, port)) + return 0; + + frame_size = mtu + VLAN_ETH_HLEN + ETH_FCS_LEN; + + return regmap_update_bits(ksz_regmap_16(dev), REG_SW_MTU__2, + REG_SW_MTU_MASK, frame_size); +} + +static int ksz9477_wait_vlan_ctrl_ready(struct ksz_device *dev) +{ + unsigned int val; + + return regmap_read_poll_timeout(ksz_regmap_8(dev), REG_SW_VLAN_CTRL, + val, !(val & VLAN_START), 10, 1000); +} + +static int ksz9477_get_vlan_table(struct ksz_device *dev, u16 vid, + u32 *vlan_table) +{ + int ret; + + mutex_lock(&dev->vlan_mutex); + + ksz_write16(dev, REG_SW_VLAN_ENTRY_INDEX__2, vid & VLAN_INDEX_M); + ksz_write8(dev, REG_SW_VLAN_CTRL, VLAN_READ | VLAN_START); + + /* wait to be cleared */ + ret = ksz9477_wait_vlan_ctrl_ready(dev); + if (ret) { + dev_dbg(dev->dev, "Failed to read vlan table\n"); + goto exit; + } + + ksz_read32(dev, REG_SW_VLAN_ENTRY__4, &vlan_table[0]); + ksz_read32(dev, REG_SW_VLAN_ENTRY_UNTAG__4, &vlan_table[1]); + ksz_read32(dev, REG_SW_VLAN_ENTRY_PORTS__4, &vlan_table[2]); + + ksz_write8(dev, REG_SW_VLAN_CTRL, 0); + +exit: + mutex_unlock(&dev->vlan_mutex); + + return ret; +} + +static int ksz9477_set_vlan_table(struct ksz_device *dev, u16 vid, + u32 *vlan_table) +{ + int ret; + + mutex_lock(&dev->vlan_mutex); + + ksz_write32(dev, REG_SW_VLAN_ENTRY__4, vlan_table[0]); + ksz_write32(dev, REG_SW_VLAN_ENTRY_UNTAG__4, vlan_table[1]); + ksz_write32(dev, REG_SW_VLAN_ENTRY_PORTS__4, vlan_table[2]); + + ksz_write16(dev, REG_SW_VLAN_ENTRY_INDEX__2, vid & VLAN_INDEX_M); + ksz_write8(dev, REG_SW_VLAN_CTRL, VLAN_START | VLAN_WRITE); + + /* wait to be cleared */ + ret = ksz9477_wait_vlan_ctrl_ready(dev); + if (ret) { + dev_dbg(dev->dev, "Failed to write vlan table\n"); + goto exit; + } + + ksz_write8(dev, REG_SW_VLAN_CTRL, 0); + + /* update vlan cache table */ + dev->vlan_cache[vid].table[0] = vlan_table[0]; + dev->vlan_cache[vid].table[1] = vlan_table[1]; + dev->vlan_cache[vid].table[2] = vlan_table[2]; + +exit: + mutex_unlock(&dev->vlan_mutex); + + return ret; +} + +static void ksz9477_read_table(struct ksz_device *dev, u32 *table) +{ + ksz_read32(dev, REG_SW_ALU_VAL_A, &table[0]); + ksz_read32(dev, REG_SW_ALU_VAL_B, &table[1]); + ksz_read32(dev, REG_SW_ALU_VAL_C, &table[2]); + ksz_read32(dev, REG_SW_ALU_VAL_D, &table[3]); +} + +static void ksz9477_write_table(struct ksz_device *dev, u32 *table) +{ + ksz_write32(dev, REG_SW_ALU_VAL_A, table[0]); + ksz_write32(dev, REG_SW_ALU_VAL_B, table[1]); + ksz_write32(dev, REG_SW_ALU_VAL_C, table[2]); + ksz_write32(dev, REG_SW_ALU_VAL_D, table[3]); +} + +static int ksz9477_wait_alu_ready(struct ksz_device *dev) +{ + unsigned int val; + + return regmap_read_poll_timeout(ksz_regmap_32(dev), REG_SW_ALU_CTRL__4, + val, !(val & ALU_START), 10, 1000); +} + +static int ksz9477_wait_alu_sta_ready(struct ksz_device *dev) +{ + unsigned int val; + + return regmap_read_poll_timeout(ksz_regmap_32(dev), + REG_SW_ALU_STAT_CTRL__4, + val, !(val & ALU_STAT_START), + 10, 1000); +} + +int ksz9477_reset_switch(struct ksz_device *dev) +{ + u8 data8; + u32 data32; + + /* reset switch */ + ksz_cfg(dev, REG_SW_OPERATION, SW_RESET, true); + + /* turn off SPI DO Edge select */ + regmap_update_bits(ksz_regmap_8(dev), REG_SW_GLOBAL_SERIAL_CTRL_0, + SPI_AUTO_EDGE_DETECTION, 0); + + /* default configuration */ + ksz_read8(dev, REG_SW_LUE_CTRL_1, &data8); + data8 = SW_AGING_ENABLE | SW_LINK_AUTO_AGING | + SW_SRC_ADDR_FILTER | SW_FLUSH_STP_TABLE | SW_FLUSH_MSTP_TABLE; + ksz_write8(dev, REG_SW_LUE_CTRL_1, data8); + + /* disable interrupts */ + ksz_write32(dev, REG_SW_INT_MASK__4, SWITCH_INT_MASK); + ksz_write32(dev, REG_SW_PORT_INT_MASK__4, 0x7F); + ksz_read32(dev, REG_SW_PORT_INT_STATUS__4, &data32); + + /* KSZ9893 compatible chips do not support refclk configuration */ + if (dev->chip_id == KSZ9893_CHIP_ID || + dev->chip_id == KSZ8563_CHIP_ID || + dev->chip_id == KSZ9563_CHIP_ID) + return 0; + + data8 = SW_ENABLE_REFCLKO; + if (dev->synclko_disable) + data8 = 0; + else if (dev->synclko_125) + data8 = SW_ENABLE_REFCLKO | SW_REFCLKO_IS_125MHZ; + ksz_write8(dev, REG_SW_GLOBAL_OUTPUT_CTRL__1, data8); + + return 0; +} + +void ksz9477_r_mib_cnt(struct ksz_device *dev, int port, u16 addr, u64 *cnt) +{ + struct ksz_port *p = &dev->ports[port]; + unsigned int val; + u32 data; + int ret; + + /* retain the flush/freeze bit */ + data = p->freeze ? MIB_COUNTER_FLUSH_FREEZE : 0; + data |= MIB_COUNTER_READ; + data |= (addr << MIB_COUNTER_INDEX_S); + ksz_pwrite32(dev, port, REG_PORT_MIB_CTRL_STAT__4, data); + + ret = regmap_read_poll_timeout(ksz_regmap_32(dev), + PORT_CTRL_ADDR(port, REG_PORT_MIB_CTRL_STAT__4), + val, !(val & MIB_COUNTER_READ), 10, 1000); + /* failed to read MIB. get out of loop */ + if (ret) { + dev_dbg(dev->dev, "Failed to get MIB\n"); + return; + } + + /* count resets upon read */ + ksz_pread32(dev, port, REG_PORT_MIB_DATA, &data); + *cnt += data; +} + +void ksz9477_r_mib_pkt(struct ksz_device *dev, int port, u16 addr, + u64 *dropped, u64 *cnt) +{ + addr = dev->info->mib_names[addr].index; + ksz9477_r_mib_cnt(dev, port, addr, cnt); +} + +void ksz9477_freeze_mib(struct ksz_device *dev, int port, bool freeze) +{ + u32 val = freeze ? MIB_COUNTER_FLUSH_FREEZE : 0; + struct ksz_port *p = &dev->ports[port]; + + /* enable/disable the port for flush/freeze function */ + mutex_lock(&p->mib.cnt_mutex); + ksz_pwrite32(dev, port, REG_PORT_MIB_CTRL_STAT__4, val); + + /* used by MIB counter reading code to know freeze is enabled */ + p->freeze = freeze; + mutex_unlock(&p->mib.cnt_mutex); +} + +void ksz9477_port_init_cnt(struct ksz_device *dev, int port) +{ + struct ksz_port_mib *mib = &dev->ports[port].mib; + + /* flush all enabled port MIB counters */ + mutex_lock(&mib->cnt_mutex); + ksz_pwrite32(dev, port, REG_PORT_MIB_CTRL_STAT__4, + MIB_COUNTER_FLUSH_FREEZE); + ksz_write8(dev, REG_SW_MAC_CTRL_6, SW_MIB_COUNTER_FLUSH); + ksz_pwrite32(dev, port, REG_PORT_MIB_CTRL_STAT__4, 0); + mutex_unlock(&mib->cnt_mutex); +} + +static void ksz9477_r_phy_quirks(struct ksz_device *dev, u16 addr, u16 reg, + u16 *data) +{ + /* KSZ8563R do not have extended registers but BMSR_ESTATEN and + * BMSR_ERCAP bits are set. + */ + if (dev->chip_id == KSZ8563_CHIP_ID && reg == MII_BMSR) + *data &= ~(BMSR_ESTATEN | BMSR_ERCAP); +} + +int ksz9477_r_phy(struct ksz_device *dev, u16 addr, u16 reg, u16 *data) +{ + u16 val = 0xffff; + int ret; + + /* No real PHY after this. Simulate the PHY. + * A fixed PHY can be setup in the device tree, but this function is + * still called for that port during initialization. + * For RGMII PHY there is no way to access it so the fixed PHY should + * be used. For SGMII PHY the supporting code will be added later. + */ + if (!dev->info->internal_phy[addr]) { + struct ksz_port *p = &dev->ports[addr]; + + switch (reg) { + case MII_BMCR: + val = 0x1140; + break; + case MII_BMSR: + val = 0x796d; + break; + case MII_PHYSID1: + val = 0x0022; + break; + case MII_PHYSID2: + val = 0x1631; + break; + case MII_ADVERTISE: + val = 0x05e1; + break; + case MII_LPA: + val = 0xc5e1; + break; + case MII_CTRL1000: + val = 0x0700; + break; + case MII_STAT1000: + if (p->phydev.speed == SPEED_1000) + val = 0x3800; + else + val = 0; + break; + } + } else { + ret = ksz_pread16(dev, addr, 0x100 + (reg << 1), &val); + if (ret) + return ret; + + ksz9477_r_phy_quirks(dev, addr, reg, &val); + } + + *data = val; + + return 0; +} + +int ksz9477_w_phy(struct ksz_device *dev, u16 addr, u16 reg, u16 val) +{ + u32 mask, val32; + + /* No real PHY after this. */ + if (!dev->info->internal_phy[addr]) + return 0; + + if (reg < 0x10) + return ksz_pwrite16(dev, addr, 0x100 + (reg << 1), val); + + /* Errata: When using SPI, I2C, or in-band register access, + * writes to certain PHY registers should be performed as + * 32-bit writes instead of 16-bit writes. + */ + val32 = val; + mask = 0xffff; + if ((reg & 1) == 0) { + val32 <<= 16; + mask <<= 16; + } + reg &= ~1; + return ksz_prmw32(dev, addr, 0x100 + (reg << 1), mask, val32); +} + +void ksz9477_cfg_port_member(struct ksz_device *dev, int port, u8 member) +{ + ksz_pwrite32(dev, port, REG_PORT_VLAN_MEMBERSHIP__4, member); +} + +void ksz9477_flush_dyn_mac_table(struct ksz_device *dev, int port) +{ + const u16 *regs = dev->info->regs; + u8 data; + + regmap_update_bits(ksz_regmap_8(dev), REG_SW_LUE_CTRL_2, + SW_FLUSH_OPTION_M << SW_FLUSH_OPTION_S, + SW_FLUSH_OPTION_DYN_MAC << SW_FLUSH_OPTION_S); + + if (port < dev->info->port_cnt) { + /* flush individual port */ + ksz_pread8(dev, port, regs[P_STP_CTRL], &data); + if (!(data & PORT_LEARN_DISABLE)) + ksz_pwrite8(dev, port, regs[P_STP_CTRL], + data | PORT_LEARN_DISABLE); + ksz_cfg(dev, S_FLUSH_TABLE_CTRL, SW_FLUSH_DYN_MAC_TABLE, true); + ksz_pwrite8(dev, port, regs[P_STP_CTRL], data); + } else { + /* flush all */ + ksz_cfg(dev, S_FLUSH_TABLE_CTRL, SW_FLUSH_STP_TABLE, true); + } +} + +int ksz9477_port_vlan_filtering(struct ksz_device *dev, int port, + bool flag, struct netlink_ext_ack *extack) +{ + if (flag) { + ksz_port_cfg(dev, port, REG_PORT_LUE_CTRL, + PORT_VLAN_LOOKUP_VID_0, true); + ksz_cfg(dev, REG_SW_LUE_CTRL_0, SW_VLAN_ENABLE, true); + } else { + ksz_cfg(dev, REG_SW_LUE_CTRL_0, SW_VLAN_ENABLE, false); + ksz_port_cfg(dev, port, REG_PORT_LUE_CTRL, + PORT_VLAN_LOOKUP_VID_0, false); + } + + return 0; +} + +int ksz9477_port_vlan_add(struct ksz_device *dev, int port, + const struct switchdev_obj_port_vlan *vlan, + struct netlink_ext_ack *extack) +{ + u32 vlan_table[3]; + bool untagged = vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED; + int err; + + err = ksz9477_get_vlan_table(dev, vlan->vid, vlan_table); + if (err) { + NL_SET_ERR_MSG_MOD(extack, "Failed to get vlan table"); + return err; + } + + vlan_table[0] = VLAN_VALID | (vlan->vid & VLAN_FID_M); + if (untagged) + vlan_table[1] |= BIT(port); + else + vlan_table[1] &= ~BIT(port); + vlan_table[1] &= ~(BIT(dev->cpu_port)); + + vlan_table[2] |= BIT(port) | BIT(dev->cpu_port); + + err = ksz9477_set_vlan_table(dev, vlan->vid, vlan_table); + if (err) { + NL_SET_ERR_MSG_MOD(extack, "Failed to set vlan table"); + return err; + } + + /* change PVID */ + if (vlan->flags & BRIDGE_VLAN_INFO_PVID) + ksz_pwrite16(dev, port, REG_PORT_DEFAULT_VID, vlan->vid); + + return 0; +} + +int ksz9477_port_vlan_del(struct ksz_device *dev, int port, + const struct switchdev_obj_port_vlan *vlan) +{ + bool untagged = vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED; + u32 vlan_table[3]; + u16 pvid; + + ksz_pread16(dev, port, REG_PORT_DEFAULT_VID, &pvid); + pvid = pvid & 0xFFF; + + if (ksz9477_get_vlan_table(dev, vlan->vid, vlan_table)) { + dev_dbg(dev->dev, "Failed to get vlan table\n"); + return -ETIMEDOUT; + } + + vlan_table[2] &= ~BIT(port); + + if (pvid == vlan->vid) + pvid = 1; + + if (untagged) + vlan_table[1] &= ~BIT(port); + + if (ksz9477_set_vlan_table(dev, vlan->vid, vlan_table)) { + dev_dbg(dev->dev, "Failed to set vlan table\n"); + return -ETIMEDOUT; + } + + ksz_pwrite16(dev, port, REG_PORT_DEFAULT_VID, pvid); + + return 0; +} + +int ksz9477_fdb_add(struct ksz_device *dev, int port, + const unsigned char *addr, u16 vid, struct dsa_db db) +{ + u32 alu_table[4]; + u32 data; + int ret = 0; + + mutex_lock(&dev->alu_mutex); + + /* find any entry with mac & vid */ + data = vid << ALU_FID_INDEX_S; + data |= ((addr[0] << 8) | addr[1]); + ksz_write32(dev, REG_SW_ALU_INDEX_0, data); + + data = ((addr[2] << 24) | (addr[3] << 16)); + data |= ((addr[4] << 8) | addr[5]); + ksz_write32(dev, REG_SW_ALU_INDEX_1, data); + + /* start read operation */ + ksz_write32(dev, REG_SW_ALU_CTRL__4, ALU_READ | ALU_START); + + /* wait to be finished */ + ret = ksz9477_wait_alu_ready(dev); + if (ret) { + dev_dbg(dev->dev, "Failed to read ALU\n"); + goto exit; + } + + /* read ALU entry */ + ksz9477_read_table(dev, alu_table); + + /* update ALU entry */ + alu_table[0] = ALU_V_STATIC_VALID; + alu_table[1] |= BIT(port); + if (vid) + alu_table[1] |= ALU_V_USE_FID; + alu_table[2] = (vid << ALU_V_FID_S); + alu_table[2] |= ((addr[0] << 8) | addr[1]); + alu_table[3] = ((addr[2] << 24) | (addr[3] << 16)); + alu_table[3] |= ((addr[4] << 8) | addr[5]); + + ksz9477_write_table(dev, alu_table); + + ksz_write32(dev, REG_SW_ALU_CTRL__4, ALU_WRITE | ALU_START); + + /* wait to be finished */ + ret = ksz9477_wait_alu_ready(dev); + if (ret) + dev_dbg(dev->dev, "Failed to write ALU\n"); + +exit: + mutex_unlock(&dev->alu_mutex); + + return ret; +} + +int ksz9477_fdb_del(struct ksz_device *dev, int port, + const unsigned char *addr, u16 vid, struct dsa_db db) +{ + u32 alu_table[4]; + u32 data; + int ret = 0; + + mutex_lock(&dev->alu_mutex); + + /* read any entry with mac & vid */ + data = vid << ALU_FID_INDEX_S; + data |= ((addr[0] << 8) | addr[1]); + ksz_write32(dev, REG_SW_ALU_INDEX_0, data); + + data = ((addr[2] << 24) | (addr[3] << 16)); + data |= ((addr[4] << 8) | addr[5]); + ksz_write32(dev, REG_SW_ALU_INDEX_1, data); + + /* start read operation */ + ksz_write32(dev, REG_SW_ALU_CTRL__4, ALU_READ | ALU_START); + + /* wait to be finished */ + ret = ksz9477_wait_alu_ready(dev); + if (ret) { + dev_dbg(dev->dev, "Failed to read ALU\n"); + goto exit; + } + + ksz_read32(dev, REG_SW_ALU_VAL_A, &alu_table[0]); + if (alu_table[0] & ALU_V_STATIC_VALID) { + ksz_read32(dev, REG_SW_ALU_VAL_B, &alu_table[1]); + ksz_read32(dev, REG_SW_ALU_VAL_C, &alu_table[2]); + ksz_read32(dev, REG_SW_ALU_VAL_D, &alu_table[3]); + + /* clear forwarding port */ + alu_table[1] &= ~BIT(port); + + /* if there is no port to forward, clear table */ + if ((alu_table[1] & ALU_V_PORT_MAP) == 0) { + alu_table[0] = 0; + alu_table[1] = 0; + alu_table[2] = 0; + alu_table[3] = 0; + } + } else { + alu_table[0] = 0; + alu_table[1] = 0; + alu_table[2] = 0; + alu_table[3] = 0; + } + + ksz9477_write_table(dev, alu_table); + + ksz_write32(dev, REG_SW_ALU_CTRL__4, ALU_WRITE | ALU_START); + + /* wait to be finished */ + ret = ksz9477_wait_alu_ready(dev); + if (ret) + dev_dbg(dev->dev, "Failed to write ALU\n"); + +exit: + mutex_unlock(&dev->alu_mutex); + + return ret; +} + +static void ksz9477_convert_alu(struct alu_struct *alu, u32 *alu_table) +{ + alu->is_static = !!(alu_table[0] & ALU_V_STATIC_VALID); + alu->is_src_filter = !!(alu_table[0] & ALU_V_SRC_FILTER); + alu->is_dst_filter = !!(alu_table[0] & ALU_V_DST_FILTER); + alu->prio_age = (alu_table[0] >> ALU_V_PRIO_AGE_CNT_S) & + ALU_V_PRIO_AGE_CNT_M; + alu->mstp = alu_table[0] & ALU_V_MSTP_M; + + alu->is_override = !!(alu_table[1] & ALU_V_OVERRIDE); + alu->is_use_fid = !!(alu_table[1] & ALU_V_USE_FID); + alu->port_forward = alu_table[1] & ALU_V_PORT_MAP; + + alu->fid = (alu_table[2] >> ALU_V_FID_S) & ALU_V_FID_M; + + alu->mac[0] = (alu_table[2] >> 8) & 0xFF; + alu->mac[1] = alu_table[2] & 0xFF; + alu->mac[2] = (alu_table[3] >> 24) & 0xFF; + alu->mac[3] = (alu_table[3] >> 16) & 0xFF; + alu->mac[4] = (alu_table[3] >> 8) & 0xFF; + alu->mac[5] = alu_table[3] & 0xFF; +} + +int ksz9477_fdb_dump(struct ksz_device *dev, int port, + dsa_fdb_dump_cb_t *cb, void *data) +{ + int ret = 0; + u32 ksz_data; + u32 alu_table[4]; + struct alu_struct alu; + int timeout; + + mutex_lock(&dev->alu_mutex); + + /* start ALU search */ + ksz_write32(dev, REG_SW_ALU_CTRL__4, ALU_START | ALU_SEARCH); + + do { + timeout = 1000; + do { + ksz_read32(dev, REG_SW_ALU_CTRL__4, &ksz_data); + if ((ksz_data & ALU_VALID) || !(ksz_data & ALU_START)) + break; + usleep_range(1, 10); + } while (timeout-- > 0); + + if (!timeout) { + dev_dbg(dev->dev, "Failed to search ALU\n"); + ret = -ETIMEDOUT; + goto exit; + } + + if (!(ksz_data & ALU_VALID)) + continue; + + /* read ALU table */ + ksz9477_read_table(dev, alu_table); + + ksz9477_convert_alu(&alu, alu_table); + + if (alu.port_forward & BIT(port)) { + ret = cb(alu.mac, alu.fid, alu.is_static, data); + if (ret) + goto exit; + } + } while (ksz_data & ALU_START); + +exit: + + /* stop ALU search */ + ksz_write32(dev, REG_SW_ALU_CTRL__4, 0); + + mutex_unlock(&dev->alu_mutex); + + return ret; +} + +int ksz9477_mdb_add(struct ksz_device *dev, int port, + const struct switchdev_obj_port_mdb *mdb, struct dsa_db db) +{ + u32 static_table[4]; + const u8 *shifts; + const u32 *masks; + u32 data; + int index; + u32 mac_hi, mac_lo; + int err = 0; + + shifts = dev->info->shifts; + masks = dev->info->masks; + + mac_hi = ((mdb->addr[0] << 8) | mdb->addr[1]); + mac_lo = ((mdb->addr[2] << 24) | (mdb->addr[3] << 16)); + mac_lo |= ((mdb->addr[4] << 8) | mdb->addr[5]); + + mutex_lock(&dev->alu_mutex); + + for (index = 0; index < dev->info->num_statics; index++) { + /* find empty slot first */ + data = (index << shifts[ALU_STAT_INDEX]) | + masks[ALU_STAT_READ] | ALU_STAT_START; + ksz_write32(dev, REG_SW_ALU_STAT_CTRL__4, data); + + /* wait to be finished */ + err = ksz9477_wait_alu_sta_ready(dev); + if (err) { + dev_dbg(dev->dev, "Failed to read ALU STATIC\n"); + goto exit; + } + + /* read ALU static table */ + ksz9477_read_table(dev, static_table); + + if (static_table[0] & ALU_V_STATIC_VALID) { + /* check this has same vid & mac address */ + if (((static_table[2] >> ALU_V_FID_S) == mdb->vid) && + ((static_table[2] & ALU_V_MAC_ADDR_HI) == mac_hi) && + static_table[3] == mac_lo) { + /* found matching one */ + break; + } + } else { + /* found empty one */ + break; + } + } + + /* no available entry */ + if (index == dev->info->num_statics) { + err = -ENOSPC; + goto exit; + } + + /* add entry */ + static_table[0] = ALU_V_STATIC_VALID; + static_table[1] |= BIT(port); + if (mdb->vid) + static_table[1] |= ALU_V_USE_FID; + static_table[2] = (mdb->vid << ALU_V_FID_S); + static_table[2] |= mac_hi; + static_table[3] = mac_lo; + + ksz9477_write_table(dev, static_table); + + data = (index << shifts[ALU_STAT_INDEX]) | ALU_STAT_START; + ksz_write32(dev, REG_SW_ALU_STAT_CTRL__4, data); + + /* wait to be finished */ + if (ksz9477_wait_alu_sta_ready(dev)) + dev_dbg(dev->dev, "Failed to read ALU STATIC\n"); + +exit: + mutex_unlock(&dev->alu_mutex); + return err; +} + +int ksz9477_mdb_del(struct ksz_device *dev, int port, + const struct switchdev_obj_port_mdb *mdb, struct dsa_db db) +{ + u32 static_table[4]; + const u8 *shifts; + const u32 *masks; + u32 data; + int index; + int ret = 0; + u32 mac_hi, mac_lo; + + shifts = dev->info->shifts; + masks = dev->info->masks; + + mac_hi = ((mdb->addr[0] << 8) | mdb->addr[1]); + mac_lo = ((mdb->addr[2] << 24) | (mdb->addr[3] << 16)); + mac_lo |= ((mdb->addr[4] << 8) | mdb->addr[5]); + + mutex_lock(&dev->alu_mutex); + + for (index = 0; index < dev->info->num_statics; index++) { + /* find empty slot first */ + data = (index << shifts[ALU_STAT_INDEX]) | + masks[ALU_STAT_READ] | ALU_STAT_START; + ksz_write32(dev, REG_SW_ALU_STAT_CTRL__4, data); + + /* wait to be finished */ + ret = ksz9477_wait_alu_sta_ready(dev); + if (ret) { + dev_dbg(dev->dev, "Failed to read ALU STATIC\n"); + goto exit; + } + + /* read ALU static table */ + ksz9477_read_table(dev, static_table); + + if (static_table[0] & ALU_V_STATIC_VALID) { + /* check this has same vid & mac address */ + + if (((static_table[2] >> ALU_V_FID_S) == mdb->vid) && + ((static_table[2] & ALU_V_MAC_ADDR_HI) == mac_hi) && + static_table[3] == mac_lo) { + /* found matching one */ + break; + } + } + } + + /* no available entry */ + if (index == dev->info->num_statics) + goto exit; + + /* clear port */ + static_table[1] &= ~BIT(port); + + if ((static_table[1] & ALU_V_PORT_MAP) == 0) { + /* delete entry */ + static_table[0] = 0; + static_table[1] = 0; + static_table[2] = 0; + static_table[3] = 0; + } + + ksz9477_write_table(dev, static_table); + + data = (index << shifts[ALU_STAT_INDEX]) | ALU_STAT_START; + ksz_write32(dev, REG_SW_ALU_STAT_CTRL__4, data); + + /* wait to be finished */ + ret = ksz9477_wait_alu_sta_ready(dev); + if (ret) + dev_dbg(dev->dev, "Failed to read ALU STATIC\n"); + +exit: + mutex_unlock(&dev->alu_mutex); + + return ret; +} + +int ksz9477_port_mirror_add(struct ksz_device *dev, int port, + struct dsa_mall_mirror_tc_entry *mirror, + bool ingress, struct netlink_ext_ack *extack) +{ + u8 data; + int p; + + /* Limit to one sniffer port + * Check if any of the port is already set for sniffing + * If yes, instruct the user to remove the previous entry & exit + */ + for (p = 0; p < dev->info->port_cnt; p++) { + /* Skip the current sniffing port */ + if (p == mirror->to_local_port) + continue; + + ksz_pread8(dev, p, P_MIRROR_CTRL, &data); + + if (data & PORT_MIRROR_SNIFFER) { + NL_SET_ERR_MSG_MOD(extack, + "Sniffer port is already configured, delete existing rules & retry"); + return -EBUSY; + } + } + + if (ingress) + ksz_port_cfg(dev, port, P_MIRROR_CTRL, PORT_MIRROR_RX, true); + else + ksz_port_cfg(dev, port, P_MIRROR_CTRL, PORT_MIRROR_TX, true); + + /* configure mirror port */ + ksz_port_cfg(dev, mirror->to_local_port, P_MIRROR_CTRL, + PORT_MIRROR_SNIFFER, true); + + ksz_cfg(dev, S_MIRROR_CTRL, SW_MIRROR_RX_TX, false); + + return 0; +} + +void ksz9477_port_mirror_del(struct ksz_device *dev, int port, + struct dsa_mall_mirror_tc_entry *mirror) +{ + bool in_use = false; + u8 data; + int p; + + if (mirror->ingress) + ksz_port_cfg(dev, port, P_MIRROR_CTRL, PORT_MIRROR_RX, false); + else + ksz_port_cfg(dev, port, P_MIRROR_CTRL, PORT_MIRROR_TX, false); + + + /* Check if any of the port is still referring to sniffer port */ + for (p = 0; p < dev->info->port_cnt; p++) { + ksz_pread8(dev, p, P_MIRROR_CTRL, &data); + + if ((data & (PORT_MIRROR_RX | PORT_MIRROR_TX))) { + in_use = true; + break; + } + } + + /* delete sniffing if there are no other mirroring rules */ + if (!in_use) + ksz_port_cfg(dev, mirror->to_local_port, P_MIRROR_CTRL, + PORT_MIRROR_SNIFFER, false); +} + +static phy_interface_t ksz9477_get_interface(struct ksz_device *dev, int port) +{ + phy_interface_t interface; + bool gbit; + + if (dev->info->internal_phy[port]) + return PHY_INTERFACE_MODE_NA; + + gbit = ksz_get_gbit(dev, port); + + interface = ksz_get_xmii(dev, port, gbit); + + return interface; +} + +void ksz9477_get_caps(struct ksz_device *dev, int port, + struct phylink_config *config) +{ + config->mac_capabilities = MAC_10 | MAC_100 | MAC_ASYM_PAUSE | + MAC_SYM_PAUSE; + + if (dev->info->gbit_capable[port]) + config->mac_capabilities |= MAC_1000FD; +} + +int ksz9477_set_ageing_time(struct ksz_device *dev, unsigned int msecs) +{ + u32 secs = msecs / 1000; + u8 value; + u8 data; + int ret; + + value = FIELD_GET(SW_AGE_PERIOD_7_0_M, secs); + + ret = ksz_write8(dev, REG_SW_LUE_CTRL_3, value); + if (ret < 0) + return ret; + + data = FIELD_GET(SW_AGE_PERIOD_10_8_M, secs); + + ret = ksz_read8(dev, REG_SW_LUE_CTRL_0, &value); + if (ret < 0) + return ret; + + value &= ~SW_AGE_CNT_M; + value |= FIELD_PREP(SW_AGE_CNT_M, data); + + return ksz_write8(dev, REG_SW_LUE_CTRL_0, value); +} + +void ksz9477_port_queue_split(struct ksz_device *dev, int port) +{ + u8 data; + + if (dev->info->num_tx_queues == 8) + data = PORT_EIGHT_QUEUE; + else if (dev->info->num_tx_queues == 4) + data = PORT_FOUR_QUEUE; + else if (dev->info->num_tx_queues == 2) + data = PORT_TWO_QUEUE; + else + data = PORT_SINGLE_QUEUE; + + ksz_prmw8(dev, port, REG_PORT_CTRL_0, PORT_QUEUE_SPLIT_MASK, data); +} + +void ksz9477_port_setup(struct ksz_device *dev, int port, bool cpu_port) +{ + struct dsa_switch *ds = dev->ds; + u16 data16; + u8 member; + + /* enable tag tail for host port */ + if (cpu_port) + ksz_port_cfg(dev, port, REG_PORT_CTRL_0, PORT_TAIL_TAG_ENABLE, + true); + + ksz9477_port_queue_split(dev, port); + + ksz_port_cfg(dev, port, REG_PORT_CTRL_0, PORT_MAC_LOOPBACK, false); + + /* set back pressure */ + ksz_port_cfg(dev, port, REG_PORT_MAC_CTRL_1, PORT_BACK_PRESSURE, true); + + /* enable broadcast storm limit */ + ksz_port_cfg(dev, port, P_BCAST_STORM_CTRL, PORT_BROADCAST_STORM, true); + + /* disable DiffServ priority */ + ksz_port_cfg(dev, port, P_PRIO_CTRL, PORT_DIFFSERV_PRIO_ENABLE, false); + + /* replace priority */ + ksz_port_cfg(dev, port, REG_PORT_MRI_MAC_CTRL, PORT_USER_PRIO_CEILING, + false); + ksz9477_port_cfg32(dev, port, REG_PORT_MTI_QUEUE_CTRL_0__4, + MTI_PVID_REPLACE, false); + + /* enable 802.1p priority */ + ksz_port_cfg(dev, port, P_PRIO_CTRL, PORT_802_1P_PRIO_ENABLE, true); + + /* force flow control for non-PHY ports only */ + ksz_port_cfg(dev, port, REG_PORT_CTRL_0, + PORT_FORCE_TX_FLOW_CTRL | PORT_FORCE_RX_FLOW_CTRL, + !dev->info->internal_phy[port]); + + if (cpu_port) + member = dsa_user_ports(ds); + else + member = BIT(dsa_upstream_port(ds, port)); + + ksz9477_cfg_port_member(dev, port, member); + + /* clear pending interrupts */ + if (dev->info->internal_phy[port]) + ksz_pread16(dev, port, REG_PORT_PHY_INT_ENABLE, &data16); +} + +void ksz9477_config_cpu_port(struct dsa_switch *ds) +{ + struct ksz_device *dev = ds->priv; + struct ksz_port *p; + int i; + + for (i = 0; i < dev->info->port_cnt; i++) { + if (dsa_is_cpu_port(ds, i) && + (dev->info->cpu_ports & (1 << i))) { + phy_interface_t interface; + const char *prev_msg; + const char *prev_mode; + + dev->cpu_port = i; + p = &dev->ports[i]; + + /* Read from XMII register to determine host port + * interface. If set specifically in device tree + * note the difference to help debugging. + */ + interface = ksz9477_get_interface(dev, i); + if (!p->interface) { + if (dev->compat_interface) { + dev_warn(dev->dev, + "Using legacy switch \"phy-mode\" property, because it is missing on port %d node. " + "Please update your device tree.\n", + i); + p->interface = dev->compat_interface; + } else { + p->interface = interface; + } + } + if (interface && interface != p->interface) { + prev_msg = " instead of "; + prev_mode = phy_modes(interface); + } else { + prev_msg = ""; + prev_mode = ""; + } + dev_info(dev->dev, + "Port%d: using phy mode %s%s%s\n", + i, + phy_modes(p->interface), + prev_msg, + prev_mode); + + /* enable cpu port */ + ksz9477_port_setup(dev, i, true); + } + } + + for (i = 0; i < dev->info->port_cnt; i++) { + if (i == dev->cpu_port) + continue; + ksz_port_stp_state_set(ds, i, BR_STATE_DISABLED); + } +} + +int ksz9477_enable_stp_addr(struct ksz_device *dev) +{ + const u32 *masks; + u32 data; + int ret; + + masks = dev->info->masks; + + /* Enable Reserved multicast table */ + ksz_cfg(dev, REG_SW_LUE_CTRL_0, SW_RESV_MCAST_ENABLE, true); + + /* Set the Override bit for forwarding BPDU packet to CPU */ + ret = ksz_write32(dev, REG_SW_ALU_VAL_B, + ALU_V_OVERRIDE | BIT(dev->cpu_port)); + if (ret < 0) + return ret; + + data = ALU_STAT_START | ALU_RESV_MCAST_ADDR | masks[ALU_STAT_WRITE]; + + ret = ksz_write32(dev, REG_SW_ALU_STAT_CTRL__4, data); + if (ret < 0) + return ret; + + /* wait to be finished */ + ret = ksz9477_wait_alu_sta_ready(dev); + if (ret < 0) { + dev_err(dev->dev, "Failed to update Reserved Multicast table\n"); + return ret; + } + + return 0; +} + +int ksz9477_setup(struct dsa_switch *ds) +{ + struct ksz_device *dev = ds->priv; + int ret = 0; + + ds->mtu_enforcement_ingress = true; + + /* Required for port partitioning. */ + ksz9477_cfg32(dev, REG_SW_QM_CTRL__4, UNICAST_VLAN_BOUNDARY, + true); + + /* Do not work correctly with tail tagging. */ + ksz_cfg(dev, REG_SW_MAC_CTRL_0, SW_CHECK_LENGTH, false); + + /* Enable REG_SW_MTU__2 reg by setting SW_JUMBO_PACKET */ + ksz_cfg(dev, REG_SW_MAC_CTRL_1, SW_JUMBO_PACKET, true); + + /* Now we can configure default MTU value */ + ret = regmap_update_bits(ksz_regmap_16(dev), REG_SW_MTU__2, REG_SW_MTU_MASK, + VLAN_ETH_FRAME_LEN + ETH_FCS_LEN); + if (ret) + return ret; + + /* queue based egress rate limit */ + ksz_cfg(dev, REG_SW_MAC_CTRL_5, SW_OUT_RATE_LIMIT_QUEUE_BASED, true); + + /* enable global MIB counter freeze function */ + ksz_cfg(dev, REG_SW_MAC_CTRL_6, SW_MIB_COUNTER_FREEZE, true); + + return 0; +} + +u32 ksz9477_get_port_addr(int port, int offset) +{ + return PORT_CTRL_ADDR(port, offset); +} + +int ksz9477_tc_cbs_set_cinc(struct ksz_device *dev, int port, u32 val) +{ + val = val >> 8; + + return ksz_pwrite16(dev, port, REG_PORT_MTI_CREDIT_INCREMENT, val); +} + +int ksz9477_switch_init(struct ksz_device *dev) +{ + u8 data8; + int ret; + + dev->port_mask = (1 << dev->info->port_cnt) - 1; + + /* turn off SPI DO Edge select */ + ret = ksz_read8(dev, REG_SW_GLOBAL_SERIAL_CTRL_0, &data8); + if (ret) + return ret; + + data8 &= ~SPI_AUTO_EDGE_DETECTION; + ret = ksz_write8(dev, REG_SW_GLOBAL_SERIAL_CTRL_0, data8); + if (ret) + return ret; + + return 0; +} + +void ksz9477_switch_exit(struct ksz_device *dev) +{ + ksz9477_reset_switch(dev); +} + +MODULE_AUTHOR("Woojung Huh <Woojung.Huh@microchip.com>"); +MODULE_DESCRIPTION("Microchip KSZ9477 Series Switch DSA Driver"); +MODULE_LICENSE("GPL"); |