summaryrefslogtreecommitdiffstats
path: root/drivers/net/dsa/microchip/ksz_common.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/dsa/microchip/ksz_common.c')
-rw-r--r--drivers/net/dsa/microchip/ksz_common.c104
1 files changed, 95 insertions, 9 deletions
diff --git a/drivers/net/dsa/microchip/ksz_common.c b/drivers/net/dsa/microchip/ksz_common.c
index 25a49708f4..2a5861a88d 100644
--- a/drivers/net/dsa/microchip/ksz_common.c
+++ b/drivers/net/dsa/microchip/ksz_common.c
@@ -1476,6 +1476,39 @@ const struct ksz_chip_data ksz_switch_chips[] = {
.gbit_capable = {true, true, true},
},
+ [KSZ8567] = {
+ .chip_id = KSZ8567_CHIP_ID,
+ .dev_name = "KSZ8567",
+ .num_vlans = 4096,
+ .num_alus = 4096,
+ .num_statics = 16,
+ .cpu_ports = 0x7F, /* can be configured as cpu port */
+ .port_cnt = 7, /* total port count */
+ .port_nirqs = 3,
+ .num_tx_queues = 4,
+ .tc_cbs_supported = true,
+ .tc_ets_supported = true,
+ .ops = &ksz9477_dev_ops,
+ .mib_names = ksz9477_mib_names,
+ .mib_cnt = ARRAY_SIZE(ksz9477_mib_names),
+ .reg_mib_cnt = MIB_COUNTER_NUM,
+ .regs = ksz9477_regs,
+ .masks = ksz9477_masks,
+ .shifts = ksz9477_shifts,
+ .xmii_ctrl0 = ksz9477_xmii_ctrl0,
+ .xmii_ctrl1 = ksz9477_xmii_ctrl1,
+ .supports_mii = {false, false, false, false,
+ false, true, true},
+ .supports_rmii = {false, false, false, false,
+ false, true, true},
+ .supports_rgmii = {false, false, false, false,
+ false, true, true},
+ .internal_phy = {true, true, true, true,
+ true, false, false},
+ .gbit_capable = {false, false, false, false, false,
+ true, true},
+ },
+
[KSZ9567] = {
.chip_id = KSZ9567_CHIP_ID,
.dev_name = "KSZ9567",
@@ -1864,6 +1897,29 @@ static void ksz_get_strings(struct dsa_switch *ds, int port,
}
}
+/**
+ * ksz_update_port_member - Adjust port forwarding rules based on STP state and
+ * isolation settings.
+ * @dev: A pointer to the struct ksz_device representing the device.
+ * @port: The port number to adjust.
+ *
+ * This function dynamically adjusts the port membership configuration for a
+ * specified port and other device ports, based on Spanning Tree Protocol (STP)
+ * states and port isolation settings. Each port, including the CPU port, has a
+ * membership register, represented as a bitfield, where each bit corresponds
+ * to a port number. A set bit indicates permission to forward frames to that
+ * port. This function iterates over all ports, updating the membership register
+ * to reflect current forwarding permissions:
+ *
+ * 1. Forwards frames only to ports that are part of the same bridge group and
+ * in the BR_STATE_FORWARDING state.
+ * 2. Takes into account the isolation status of ports; ports in the
+ * BR_STATE_FORWARDING state with BR_ISOLATED configuration will not forward
+ * frames to each other, even if they are in the same bridge group.
+ * 3. Ensures that the CPU port is included in the membership based on its
+ * upstream port configuration, allowing for management and control traffic
+ * to flow as required.
+ */
static void ksz_update_port_member(struct ksz_device *dev, int port)
{
struct ksz_port *p = &dev->ports[port];
@@ -1892,7 +1948,14 @@ static void ksz_update_port_member(struct ksz_device *dev, int port)
if (other_p->stp_state != BR_STATE_FORWARDING)
continue;
- if (p->stp_state == BR_STATE_FORWARDING) {
+ /* At this point we know that "port" and "other" port [i] are in
+ * the same bridge group and that "other" port [i] is in
+ * forwarding stp state. If "port" is also in forwarding stp
+ * state, we can allow forwarding from port [port] to port [i].
+ * Except if both ports are isolated.
+ */
+ if (p->stp_state == BR_STATE_FORWARDING &&
+ !(p->isolated && other_p->isolated)) {
val |= BIT(port);
port_member |= BIT(i);
}
@@ -1911,8 +1974,19 @@ static void ksz_update_port_member(struct ksz_device *dev, int port)
third_p = &dev->ports[j];
if (third_p->stp_state != BR_STATE_FORWARDING)
continue;
+
third_dp = dsa_to_port(ds, j);
- if (dsa_port_bridge_same(other_dp, third_dp))
+
+ /* Now we updating relation of the "other" port [i] to
+ * the "third" port [j]. We already know that "other"
+ * port [i] is in forwarding stp state and that "third"
+ * port [j] is in forwarding stp state too.
+ * We need to check if "other" port [i] and "third" port
+ * [j] are in the same bridge group and not isolated
+ * before allowing forwarding from port [i] to port [j].
+ */
+ if (dsa_port_bridge_same(other_dp, third_dp) &&
+ !(other_p->isolated && third_p->isolated))
val |= BIT(j);
}
@@ -2655,6 +2729,7 @@ static void ksz_port_teardown(struct dsa_switch *ds, int port)
switch (dev->chip_id) {
case KSZ8563_CHIP_ID:
+ case KSZ8567_CHIP_ID:
case KSZ9477_CHIP_ID:
case KSZ9563_CHIP_ID:
case KSZ9567_CHIP_ID:
@@ -2670,7 +2745,7 @@ static int ksz_port_pre_bridge_flags(struct dsa_switch *ds, int port,
struct switchdev_brport_flags flags,
struct netlink_ext_ack *extack)
{
- if (flags.mask & ~BR_LEARNING)
+ if (flags.mask & ~(BR_LEARNING | BR_ISOLATED))
return -EINVAL;
return 0;
@@ -2683,8 +2758,12 @@ static int ksz_port_bridge_flags(struct dsa_switch *ds, int port,
struct ksz_device *dev = ds->priv;
struct ksz_port *p = &dev->ports[port];
- if (flags.mask & BR_LEARNING) {
- p->learning = !!(flags.val & BR_LEARNING);
+ if (flags.mask & (BR_LEARNING | BR_ISOLATED)) {
+ if (flags.mask & BR_LEARNING)
+ p->learning = !!(flags.val & BR_LEARNING);
+
+ if (flags.mask & BR_ISOLATED)
+ p->isolated = !!(flags.val & BR_ISOLATED);
/* Make the change take effect immediately */
ksz_port_stp_state_set(ds, port, p->stp_state);
@@ -2711,7 +2790,8 @@ static enum dsa_tag_protocol ksz_get_tag_protocol(struct dsa_switch *ds,
dev->chip_id == KSZ9563_CHIP_ID)
proto = DSA_TAG_PROTO_KSZ9893;
- if (dev->chip_id == KSZ9477_CHIP_ID ||
+ if (dev->chip_id == KSZ8567_CHIP_ID ||
+ dev->chip_id == KSZ9477_CHIP_ID ||
dev->chip_id == KSZ9896_CHIP_ID ||
dev->chip_id == KSZ9897_CHIP_ID ||
dev->chip_id == KSZ9567_CHIP_ID)
@@ -2819,6 +2899,7 @@ static int ksz_max_mtu(struct dsa_switch *ds, int port)
case KSZ8830_CHIP_ID:
return KSZ8863_HUGE_PACKET_SIZE - VLAN_ETH_HLEN - ETH_FCS_LEN;
case KSZ8563_CHIP_ID:
+ case KSZ8567_CHIP_ID:
case KSZ9477_CHIP_ID:
case KSZ9563_CHIP_ID:
case KSZ9567_CHIP_ID:
@@ -2845,6 +2926,7 @@ static int ksz_validate_eee(struct dsa_switch *ds, int port)
switch (dev->chip_id) {
case KSZ8563_CHIP_ID:
+ case KSZ8567_CHIP_ID:
case KSZ9477_CHIP_ID:
case KSZ9563_CHIP_ID:
case KSZ9567_CHIP_ID:
@@ -2858,7 +2940,7 @@ static int ksz_validate_eee(struct dsa_switch *ds, int port)
}
static int ksz_get_mac_eee(struct dsa_switch *ds, int port,
- struct ethtool_eee *e)
+ struct ethtool_keee *e)
{
int ret;
@@ -2878,7 +2960,7 @@ static int ksz_get_mac_eee(struct dsa_switch *ds, int port,
}
static int ksz_set_mac_eee(struct dsa_switch *ds, int port,
- struct ethtool_eee *e)
+ struct ethtool_keee *e)
{
struct ksz_device *dev = ds->priv;
int ret;
@@ -2968,7 +3050,7 @@ phy_interface_t ksz_get_xmii(struct ksz_device *dev, int port, bool gbit)
else
interface = PHY_INTERFACE_MODE_MII;
} else if (val == bitval[P_RMII_SEL]) {
- interface = PHY_INTERFACE_MODE_RGMII;
+ interface = PHY_INTERFACE_MODE_RMII;
} else {
interface = PHY_INTERFACE_MODE_RGMII;
if (data8 & P_RGMII_ID_EG_ENABLE)
@@ -3189,6 +3271,7 @@ static int ksz_switch_detect(struct ksz_device *dev)
case KSZ9896_CHIP_ID:
case KSZ9897_CHIP_ID:
case KSZ9567_CHIP_ID:
+ case KSZ8567_CHIP_ID:
case LAN9370_CHIP_ID:
case LAN9371_CHIP_ID:
case LAN9372_CHIP_ID:
@@ -3226,6 +3309,7 @@ static int ksz_cls_flower_add(struct dsa_switch *ds, int port,
switch (dev->chip_id) {
case KSZ8563_CHIP_ID:
+ case KSZ8567_CHIP_ID:
case KSZ9477_CHIP_ID:
case KSZ9563_CHIP_ID:
case KSZ9567_CHIP_ID:
@@ -3245,6 +3329,7 @@ static int ksz_cls_flower_del(struct dsa_switch *ds, int port,
switch (dev->chip_id) {
case KSZ8563_CHIP_ID:
+ case KSZ8567_CHIP_ID:
case KSZ9477_CHIP_ID:
case KSZ9563_CHIP_ID:
case KSZ9567_CHIP_ID:
@@ -4148,6 +4233,7 @@ static int ksz_parse_drive_strength(struct ksz_device *dev)
case KSZ8794_CHIP_ID:
case KSZ8765_CHIP_ID:
case KSZ8563_CHIP_ID:
+ case KSZ8567_CHIP_ID:
case KSZ9477_CHIP_ID:
case KSZ9563_CHIP_ID:
case KSZ9567_CHIP_ID: