diff options
Diffstat (limited to 'drivers/net/dsa/microchip/lan937x_main.c')
-rw-r--r-- | drivers/net/dsa/microchip/lan937x_main.c | 404 |
1 files changed, 404 insertions, 0 deletions
diff --git a/drivers/net/dsa/microchip/lan937x_main.c b/drivers/net/dsa/microchip/lan937x_main.c new file mode 100644 index 0000000000..b479a628b1 --- /dev/null +++ b/drivers/net/dsa/microchip/lan937x_main.c @@ -0,0 +1,404 @@ +// SPDX-License-Identifier: GPL-2.0 +/* Microchip LAN937X switch driver main logic + * Copyright (C) 2019-2022 Microchip Technology Inc. + */ +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/iopoll.h> +#include <linux/phy.h> +#include <linux/of_net.h> +#include <linux/if_bridge.h> +#include <linux/if_vlan.h> +#include <linux/math.h> +#include <net/dsa.h> +#include <net/switchdev.h> + +#include "lan937x_reg.h" +#include "ksz_common.h" +#include "ksz9477.h" +#include "lan937x.h" + +static int lan937x_cfg(struct ksz_device *dev, u32 addr, u8 bits, bool set) +{ + return regmap_update_bits(ksz_regmap_8(dev), addr, bits, set ? bits : 0); +} + +static int lan937x_port_cfg(struct ksz_device *dev, int port, int offset, + u8 bits, bool set) +{ + return regmap_update_bits(ksz_regmap_8(dev), PORT_CTRL_ADDR(port, offset), + bits, set ? bits : 0); +} + +static int lan937x_enable_spi_indirect_access(struct ksz_device *dev) +{ + u16 data16; + int ret; + + /* Enable Phy access through SPI */ + ret = lan937x_cfg(dev, REG_GLOBAL_CTRL_0, SW_PHY_REG_BLOCK, false); + if (ret < 0) + return ret; + + ret = ksz_read16(dev, REG_VPHY_SPECIAL_CTRL__2, &data16); + if (ret < 0) + return ret; + + /* Allow SPI access */ + data16 |= VPHY_SPI_INDIRECT_ENABLE; + + return ksz_write16(dev, REG_VPHY_SPECIAL_CTRL__2, data16); +} + +static int lan937x_vphy_ind_addr_wr(struct ksz_device *dev, int addr, int reg) +{ + u16 addr_base = REG_PORT_T1_PHY_CTRL_BASE; + u16 temp; + + /* get register address based on the logical port */ + temp = PORT_CTRL_ADDR(addr, (addr_base + (reg << 2))); + + return ksz_write16(dev, REG_VPHY_IND_ADDR__2, temp); +} + +static int lan937x_internal_phy_write(struct ksz_device *dev, int addr, int reg, + u16 val) +{ + unsigned int value; + int ret; + + /* Check for internal phy port */ + if (!dev->info->internal_phy[addr]) + return -EOPNOTSUPP; + + ret = lan937x_vphy_ind_addr_wr(dev, addr, reg); + if (ret < 0) + return ret; + + /* Write the data to be written to the VPHY reg */ + ret = ksz_write16(dev, REG_VPHY_IND_DATA__2, val); + if (ret < 0) + return ret; + + /* Write the Write En and Busy bit */ + ret = ksz_write16(dev, REG_VPHY_IND_CTRL__2, + (VPHY_IND_WRITE | VPHY_IND_BUSY)); + if (ret < 0) + return ret; + + ret = regmap_read_poll_timeout(ksz_regmap_16(dev), REG_VPHY_IND_CTRL__2, + value, !(value & VPHY_IND_BUSY), 10, + 1000); + if (ret < 0) { + dev_err(dev->dev, "Failed to write phy register\n"); + return ret; + } + + return 0; +} + +static int lan937x_internal_phy_read(struct ksz_device *dev, int addr, int reg, + u16 *val) +{ + unsigned int value; + int ret; + + /* Check for internal phy port, return 0xffff for non-existent phy */ + if (!dev->info->internal_phy[addr]) + return 0xffff; + + ret = lan937x_vphy_ind_addr_wr(dev, addr, reg); + if (ret < 0) + return ret; + + /* Write Read and Busy bit to start the transaction */ + ret = ksz_write16(dev, REG_VPHY_IND_CTRL__2, VPHY_IND_BUSY); + if (ret < 0) + return ret; + + ret = regmap_read_poll_timeout(ksz_regmap_16(dev), REG_VPHY_IND_CTRL__2, + value, !(value & VPHY_IND_BUSY), 10, + 1000); + if (ret < 0) { + dev_err(dev->dev, "Failed to read phy register\n"); + return ret; + } + + /* Read the VPHY register which has the PHY data */ + return ksz_read16(dev, REG_VPHY_IND_DATA__2, val); +} + +int lan937x_r_phy(struct ksz_device *dev, u16 addr, u16 reg, u16 *data) +{ + return lan937x_internal_phy_read(dev, addr, reg, data); +} + +int lan937x_w_phy(struct ksz_device *dev, u16 addr, u16 reg, u16 val) +{ + return lan937x_internal_phy_write(dev, addr, reg, val); +} + +int lan937x_reset_switch(struct ksz_device *dev) +{ + u32 data32; + int ret; + + /* reset switch */ + ret = lan937x_cfg(dev, REG_SW_OPERATION, SW_RESET, true); + if (ret < 0) + return ret; + + /* Enable Auto Aging */ + ret = lan937x_cfg(dev, REG_SW_LUE_CTRL_1, SW_LINK_AUTO_AGING, true); + if (ret < 0) + return ret; + + /* disable interrupts */ + ret = ksz_write32(dev, REG_SW_INT_MASK__4, SWITCH_INT_MASK); + if (ret < 0) + return ret; + + ret = ksz_write32(dev, REG_SW_INT_STATUS__4, POR_READY_INT); + if (ret < 0) + return ret; + + ret = ksz_write32(dev, REG_SW_PORT_INT_MASK__4, 0xFF); + if (ret < 0) + return ret; + + return ksz_read32(dev, REG_SW_PORT_INT_STATUS__4, &data32); +} + +void lan937x_port_setup(struct ksz_device *dev, int port, bool cpu_port) +{ + const u32 *masks = dev->info->masks; + const u16 *regs = dev->info->regs; + struct dsa_switch *ds = dev->ds; + u8 member; + + /* enable tag tail for host port */ + if (cpu_port) + lan937x_port_cfg(dev, port, REG_PORT_CTRL_0, + PORT_TAIL_TAG_ENABLE, true); + + /* Enable the Port Queue split */ + ksz9477_port_queue_split(dev, port); + + /* set back pressure for half duplex */ + lan937x_port_cfg(dev, port, REG_PORT_MAC_CTRL_1, PORT_BACK_PRESSURE, + true); + + /* enable 802.1p priority */ + lan937x_port_cfg(dev, port, P_PRIO_CTRL, PORT_802_1P_PRIO_ENABLE, true); + + if (!dev->info->internal_phy[port]) + lan937x_port_cfg(dev, port, regs[P_XMII_CTRL_0], + masks[P_MII_TX_FLOW_CTRL] | + masks[P_MII_RX_FLOW_CTRL], + true); + + if (cpu_port) + member = dsa_user_ports(ds); + else + member = BIT(dsa_upstream_port(ds, port)); + + dev->dev_ops->cfg_port_member(dev, port, member); +} + +void lan937x_config_cpu_port(struct dsa_switch *ds) +{ + struct ksz_device *dev = ds->priv; + struct dsa_port *dp; + + dsa_switch_for_each_cpu_port(dp, ds) { + if (dev->info->cpu_ports & (1 << dp->index)) { + dev->cpu_port = dp->index; + + /* enable cpu port */ + lan937x_port_setup(dev, dp->index, true); + } + } + + dsa_switch_for_each_user_port(dp, ds) { + ksz_port_stp_state_set(ds, dp->index, BR_STATE_DISABLED); + } +} + +int lan937x_change_mtu(struct ksz_device *dev, int port, int new_mtu) +{ + struct dsa_switch *ds = dev->ds; + int ret; + + new_mtu += VLAN_ETH_HLEN + ETH_FCS_LEN; + + if (dsa_is_cpu_port(ds, port)) + new_mtu += LAN937X_TAG_LEN; + + if (new_mtu >= FR_MIN_SIZE) + ret = lan937x_port_cfg(dev, port, REG_PORT_MAC_CTRL_0, + PORT_JUMBO_PACKET, true); + else + ret = lan937x_port_cfg(dev, port, REG_PORT_MAC_CTRL_0, + PORT_JUMBO_PACKET, false); + if (ret < 0) { + dev_err(ds->dev, "failed to enable jumbo\n"); + return ret; + } + + /* Write the frame size in PORT_MAX_FR_SIZE register */ + ret = ksz_pwrite16(dev, port, PORT_MAX_FR_SIZE, new_mtu); + if (ret) { + dev_err(ds->dev, "failed to update mtu for port %d\n", port); + return ret; + } + + return 0; +} + +int lan937x_set_ageing_time(struct ksz_device *dev, unsigned int msecs) +{ + u32 secs = msecs / 1000; + u32 value; + int ret; + + value = FIELD_GET(SW_AGE_PERIOD_7_0_M, secs); + + ret = ksz_write8(dev, REG_SW_AGE_PERIOD__1, value); + if (ret < 0) + return ret; + + value = FIELD_GET(SW_AGE_PERIOD_19_8_M, secs); + + return ksz_write16(dev, REG_SW_AGE_PERIOD__2, value); +} + +static void lan937x_set_tune_adj(struct ksz_device *dev, int port, + u16 reg, u8 val) +{ + u16 data16; + + ksz_pread16(dev, port, reg, &data16); + + /* Update tune Adjust */ + data16 |= FIELD_PREP(PORT_TUNE_ADJ, val); + ksz_pwrite16(dev, port, reg, data16); + + /* write DLL reset to take effect */ + data16 |= PORT_DLL_RESET; + ksz_pwrite16(dev, port, reg, data16); +} + +static void lan937x_set_rgmii_tx_delay(struct ksz_device *dev, int port) +{ + u8 val; + + /* Apply different codes based on the ports as per characterization + * results + */ + val = (port == LAN937X_RGMII_1_PORT) ? RGMII_1_TX_DELAY_2NS : + RGMII_2_TX_DELAY_2NS; + + lan937x_set_tune_adj(dev, port, REG_PORT_XMII_CTRL_5, val); +} + +static void lan937x_set_rgmii_rx_delay(struct ksz_device *dev, int port) +{ + u8 val; + + val = (port == LAN937X_RGMII_1_PORT) ? RGMII_1_RX_DELAY_2NS : + RGMII_2_RX_DELAY_2NS; + + lan937x_set_tune_adj(dev, port, REG_PORT_XMII_CTRL_4, val); +} + +void lan937x_phylink_get_caps(struct ksz_device *dev, int port, + struct phylink_config *config) +{ + config->mac_capabilities = MAC_100FD; + + if (dev->info->supports_rgmii[port]) { + /* MII/RMII/RGMII ports */ + config->mac_capabilities |= MAC_ASYM_PAUSE | MAC_SYM_PAUSE | + MAC_100HD | MAC_10 | MAC_1000FD; + } +} + +void lan937x_setup_rgmii_delay(struct ksz_device *dev, int port) +{ + struct ksz_port *p = &dev->ports[port]; + + if (p->rgmii_tx_val) { + lan937x_set_rgmii_tx_delay(dev, port); + dev_info(dev->dev, "Applied rgmii tx delay for the port %d\n", + port); + } + + if (p->rgmii_rx_val) { + lan937x_set_rgmii_rx_delay(dev, port); + dev_info(dev->dev, "Applied rgmii rx delay for the port %d\n", + port); + } +} + +int lan937x_tc_cbs_set_cinc(struct ksz_device *dev, int port, u32 val) +{ + return ksz_pwrite32(dev, port, REG_PORT_MTI_CREDIT_INCREMENT, val); +} + +int lan937x_switch_init(struct ksz_device *dev) +{ + dev->port_mask = (1 << dev->info->port_cnt) - 1; + + return 0; +} + +int lan937x_setup(struct dsa_switch *ds) +{ + struct ksz_device *dev = ds->priv; + int ret; + + /* enable Indirect Access from SPI to the VPHY registers */ + ret = lan937x_enable_spi_indirect_access(dev); + if (ret < 0) { + dev_err(dev->dev, "failed to enable spi indirect access"); + return ret; + } + + /* The VLAN aware is a global setting. Mixed vlan + * filterings are not supported. + */ + ds->vlan_filtering_is_global = true; + + /* Enable aggressive back off for half duplex & UNH mode */ + lan937x_cfg(dev, REG_SW_MAC_CTRL_0, + (SW_PAUSE_UNH_MODE | SW_NEW_BACKOFF | SW_AGGR_BACKOFF), + true); + + /* If NO_EXC_COLLISION_DROP bit is set, the switch will not drop + * packets when 16 or more collisions occur + */ + lan937x_cfg(dev, REG_SW_MAC_CTRL_1, NO_EXC_COLLISION_DROP, true); + + /* enable global MIB counter freeze function */ + lan937x_cfg(dev, REG_SW_MAC_CTRL_6, SW_MIB_COUNTER_FREEZE, true); + + /* disable CLK125 & CLK25, 1: disable, 0: enable */ + lan937x_cfg(dev, REG_SW_GLOBAL_OUTPUT_CTRL__1, + (SW_CLK125_ENB | SW_CLK25_ENB), true); + + return 0; +} + +void lan937x_teardown(struct dsa_switch *ds) +{ + +} + +void lan937x_switch_exit(struct ksz_device *dev) +{ + lan937x_reset_switch(dev); +} + +MODULE_AUTHOR("Arun Ramadoss <arun.ramadoss@microchip.com>"); +MODULE_DESCRIPTION("Microchip LAN937x Series Switch DSA Driver"); +MODULE_LICENSE("GPL"); |