summaryrefslogtreecommitdiffstats
path: root/drivers/net/dsa/microchip
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/dsa/microchip')
-rw-r--r--drivers/net/dsa/microchip/Kconfig2
-rw-r--r--drivers/net/dsa/microchip/Makefile2
-rw-r--r--drivers/net/dsa/microchip/ksz8.h9
-rw-r--r--drivers/net/dsa/microchip/ksz8795.c251
-rw-r--r--drivers/net/dsa/microchip/ksz8795_reg.h10
-rw-r--r--drivers/net/dsa/microchip/ksz9477.c57
-rw-r--r--drivers/net/dsa/microchip/ksz9477.h2
-rw-r--r--drivers/net/dsa/microchip/ksz9477_reg.h10
-rw-r--r--drivers/net/dsa/microchip/ksz9477_tc_flower.c3
-rw-r--r--drivers/net/dsa/microchip/ksz_common.c242
-rw-r--r--drivers/net/dsa/microchip/ksz_common.h17
-rw-r--r--drivers/net/dsa/microchip/ksz_dcb.c819
-rw-r--r--drivers/net/dsa/microchip/ksz_dcb.h23
-rw-r--r--drivers/net/dsa/microchip/ksz_spi.c8
14 files changed, 1242 insertions, 213 deletions
diff --git a/drivers/net/dsa/microchip/Kconfig b/drivers/net/dsa/microchip/Kconfig
index 394ca8678d..c1b906c05a 100644
--- a/drivers/net/dsa/microchip/Kconfig
+++ b/drivers/net/dsa/microchip/Kconfig
@@ -4,6 +4,8 @@ menuconfig NET_DSA_MICROCHIP_KSZ_COMMON
depends on NET_DSA
select NET_DSA_TAG_KSZ
select NET_DSA_TAG_NONE
+ select NET_IEEE8021Q_HELPERS
+ select DCB
help
This driver adds support for Microchip KSZ9477 series switch and
KSZ8795/KSZ88x3 switch chips.
diff --git a/drivers/net/dsa/microchip/Makefile b/drivers/net/dsa/microchip/Makefile
index 49459a50db..1cfba1ec93 100644
--- a/drivers/net/dsa/microchip/Makefile
+++ b/drivers/net/dsa/microchip/Makefile
@@ -1,6 +1,6 @@
# SPDX-License-Identifier: GPL-2.0-only
obj-$(CONFIG_NET_DSA_MICROCHIP_KSZ_COMMON) += ksz_switch.o
-ksz_switch-objs := ksz_common.o
+ksz_switch-objs := ksz_common.o ksz_dcb.o
ksz_switch-objs += ksz9477.o ksz9477_acl.o ksz9477_tc_flower.o
ksz_switch-objs += ksz8795.o
ksz_switch-objs += lan937x_main.o
diff --git a/drivers/net/dsa/microchip/ksz8.h b/drivers/net/dsa/microchip/ksz8.h
index 1a5225264e..ae43077e76 100644
--- a/drivers/net/dsa/microchip/ksz8.h
+++ b/drivers/net/dsa/microchip/ksz8.h
@@ -19,8 +19,6 @@ void ksz8_flush_dyn_mac_table(struct ksz_device *dev, int port);
void ksz8_port_setup(struct ksz_device *dev, int port, bool cpu_port);
int ksz8_r_phy(struct ksz_device *dev, u16 phy, u16 reg, u16 *val);
int ksz8_w_phy(struct ksz_device *dev, u16 phy, u16 reg, u16 val);
-int ksz8_r_dyn_mac_table(struct ksz_device *dev, u16 addr, u8 *mac_addr,
- u8 *fid, u8 *src_port, u8 *timestamp, u16 *entries);
void ksz8_r_mib_cnt(struct ksz_device *dev, int port, u16 addr, u64 *cnt);
void ksz8_r_mib_pkt(struct ksz_device *dev, int port, u16 addr,
u64 *dropped, u64 *cnt);
@@ -56,9 +54,10 @@ int ksz8_reset_switch(struct ksz_device *dev);
int ksz8_switch_init(struct ksz_device *dev);
void ksz8_switch_exit(struct ksz_device *dev);
int ksz8_change_mtu(struct ksz_device *dev, int port, int mtu);
-void ksz8_phylink_mac_link_up(struct ksz_device *dev, int port,
- unsigned int mode, phy_interface_t interface,
- struct phy_device *phydev, int speed, int duplex,
+void ksz8_phylink_mac_link_up(struct phylink_config *config,
+ struct phy_device *phydev, unsigned int mode,
+ phy_interface_t interface, int speed, int duplex,
bool tx_pause, bool rx_pause);
+int ksz8_all_queues_split(struct ksz_device *dev, int queues);
#endif
diff --git a/drivers/net/dsa/microchip/ksz8795.c b/drivers/net/dsa/microchip/ksz8795.c
index 14923535ca..d27b9c36d7 100644
--- a/drivers/net/dsa/microchip/ksz8795.c
+++ b/drivers/net/dsa/microchip/ksz8795.c
@@ -127,37 +127,71 @@ int ksz8_change_mtu(struct ksz_device *dev, int port, int mtu)
return -EOPNOTSUPP;
}
-static void ksz8795_set_prio_queue(struct ksz_device *dev, int port, int queue)
+static int ksz8_port_queue_split(struct ksz_device *dev, int port, int queues)
{
- u8 hi, lo;
+ u8 mask_4q, mask_2q;
+ u8 reg_4q, reg_2q;
+ u8 data_4q = 0;
+ u8 data_2q = 0;
+ int ret;
- /* Number of queues can only be 1, 2, or 4. */
- switch (queue) {
- case 4:
- case 3:
- queue = PORT_QUEUE_SPLIT_4;
- break;
- case 2:
- queue = PORT_QUEUE_SPLIT_2;
- break;
- default:
- queue = PORT_QUEUE_SPLIT_1;
+ if (ksz_is_ksz88x3(dev)) {
+ mask_4q = KSZ8873_PORT_4QUEUE_SPLIT_EN;
+ mask_2q = KSZ8873_PORT_2QUEUE_SPLIT_EN;
+ reg_4q = REG_PORT_CTRL_0;
+ reg_2q = REG_PORT_CTRL_2;
+
+ /* KSZ8795 family switches have Weighted Fair Queueing (WFQ)
+ * enabled by default. Enable it for KSZ8873 family switches
+ * too. Default value for KSZ8873 family is strict priority,
+ * which should be enabled by using TC_SETUP_QDISC_ETS, not
+ * by default.
+ */
+ ret = ksz_rmw8(dev, REG_SW_CTRL_3, WEIGHTED_FAIR_QUEUE_ENABLE,
+ WEIGHTED_FAIR_QUEUE_ENABLE);
+ if (ret)
+ return ret;
+ } else {
+ mask_4q = KSZ8795_PORT_4QUEUE_SPLIT_EN;
+ mask_2q = KSZ8795_PORT_2QUEUE_SPLIT_EN;
+ reg_4q = REG_PORT_CTRL_13;
+ reg_2q = REG_PORT_CTRL_0;
+
+ /* TODO: this is legacy from initial KSZ8795 driver, should be
+ * moved to appropriate place in the future.
+ */
+ ret = ksz_rmw8(dev, REG_SW_CTRL_19,
+ SW_OUT_RATE_LIMIT_QUEUE_BASED,
+ SW_OUT_RATE_LIMIT_QUEUE_BASED);
+ if (ret)
+ return ret;
}
- ksz_pread8(dev, port, REG_PORT_CTRL_0, &lo);
- ksz_pread8(dev, port, P_DROP_TAG_CTRL, &hi);
- lo &= ~PORT_QUEUE_SPLIT_L;
- if (queue & PORT_QUEUE_SPLIT_2)
- lo |= PORT_QUEUE_SPLIT_L;
- hi &= ~PORT_QUEUE_SPLIT_H;
- if (queue & PORT_QUEUE_SPLIT_4)
- hi |= PORT_QUEUE_SPLIT_H;
- ksz_pwrite8(dev, port, REG_PORT_CTRL_0, lo);
- ksz_pwrite8(dev, port, P_DROP_TAG_CTRL, hi);
-
- /* Default is port based for egress rate limit. */
- if (queue != PORT_QUEUE_SPLIT_1)
- ksz_cfg(dev, REG_SW_CTRL_19, SW_OUT_RATE_LIMIT_QUEUE_BASED,
- true);
+
+ if (queues == 4)
+ data_4q = mask_4q;
+ else if (queues == 2)
+ data_2q = mask_2q;
+
+ ret = ksz_prmw8(dev, port, reg_4q, mask_4q, data_4q);
+ if (ret)
+ return ret;
+
+ return ksz_prmw8(dev, port, reg_2q, mask_2q, data_2q);
+}
+
+int ksz8_all_queues_split(struct ksz_device *dev, int queues)
+{
+ struct dsa_switch *ds = dev->ds;
+ const struct dsa_port *dp;
+
+ dsa_switch_for_each_port(dp, ds) {
+ int ret = ksz8_port_queue_split(dev, dp->index, queues);
+
+ if (ret)
+ return ret;
+ }
+
+ return 0;
}
void ksz8_r_mib_cnt(struct ksz_device *dev, int port, u16 addr, u64 *cnt)
@@ -385,39 +419,39 @@ static int ksz8_valid_dyn_entry(struct ksz_device *dev, u8 *data)
int timeout = 100;
const u32 *masks;
const u16 *regs;
+ int ret;
masks = dev->info->masks;
regs = dev->info->regs;
do {
- ksz_read8(dev, regs[REG_IND_DATA_CHECK], data);
+ ret = ksz_read8(dev, regs[REG_IND_DATA_CHECK], data);
+ if (ret)
+ return ret;
+
timeout--;
} while ((*data & masks[DYNAMIC_MAC_TABLE_NOT_READY]) && timeout);
/* Entry is not ready for accessing. */
- if (*data & masks[DYNAMIC_MAC_TABLE_NOT_READY]) {
- return -EAGAIN;
- /* Entry is ready for accessing. */
- } else {
- ksz_read8(dev, regs[REG_IND_DATA_8], data);
+ if (*data & masks[DYNAMIC_MAC_TABLE_NOT_READY])
+ return -ETIMEDOUT;
- /* There is no valid entry in the table. */
- if (*data & masks[DYNAMIC_MAC_TABLE_MAC_EMPTY])
- return -ENXIO;
- }
- return 0;
+ /* Entry is ready for accessing. */
+ return ksz_read8(dev, regs[REG_IND_DATA_8], data);
}
-int ksz8_r_dyn_mac_table(struct ksz_device *dev, u16 addr, u8 *mac_addr,
- u8 *fid, u8 *src_port, u8 *timestamp, u16 *entries)
+static int ksz8_r_dyn_mac_table(struct ksz_device *dev, u16 addr, u8 *mac_addr,
+ u8 *fid, u8 *src_port, u16 *entries)
{
u32 data_hi, data_lo;
const u8 *shifts;
const u32 *masks;
const u16 *regs;
u16 ctrl_addr;
+ u64 buf = 0;
u8 data;
- int rc;
+ int cnt;
+ int ret;
shifts = dev->info->shifts;
masks = dev->info->masks;
@@ -426,49 +460,50 @@ int ksz8_r_dyn_mac_table(struct ksz_device *dev, u16 addr, u8 *mac_addr,
ctrl_addr = IND_ACC_TABLE(TABLE_DYNAMIC_MAC | TABLE_READ) | addr;
mutex_lock(&dev->alu_mutex);
- ksz_write16(dev, regs[REG_IND_CTRL_0], ctrl_addr);
+ ret = ksz_write16(dev, regs[REG_IND_CTRL_0], ctrl_addr);
+ if (ret)
+ goto unlock_alu;
+
+ ret = ksz8_valid_dyn_entry(dev, &data);
+ if (ret)
+ goto unlock_alu;
- rc = ksz8_valid_dyn_entry(dev, &data);
- if (rc == -EAGAIN) {
- if (addr == 0)
- *entries = 0;
- } else if (rc == -ENXIO) {
+ if (data & masks[DYNAMIC_MAC_TABLE_MAC_EMPTY]) {
*entries = 0;
- /* At least one valid entry in the table. */
- } else {
- u64 buf = 0;
- int cnt;
-
- ksz_read64(dev, regs[REG_IND_DATA_HI], &buf);
- data_hi = (u32)(buf >> 32);
- data_lo = (u32)buf;
-
- /* Check out how many valid entry in the table. */
- cnt = data & masks[DYNAMIC_MAC_TABLE_ENTRIES_H];
- cnt <<= shifts[DYNAMIC_MAC_ENTRIES_H];
- cnt |= (data_hi & masks[DYNAMIC_MAC_TABLE_ENTRIES]) >>
- shifts[DYNAMIC_MAC_ENTRIES];
- *entries = cnt + 1;
-
- *fid = (data_hi & masks[DYNAMIC_MAC_TABLE_FID]) >>
- shifts[DYNAMIC_MAC_FID];
- *src_port = (data_hi & masks[DYNAMIC_MAC_TABLE_SRC_PORT]) >>
- shifts[DYNAMIC_MAC_SRC_PORT];
- *timestamp = (data_hi & masks[DYNAMIC_MAC_TABLE_TIMESTAMP]) >>
- shifts[DYNAMIC_MAC_TIMESTAMP];
-
- mac_addr[5] = (u8)data_lo;
- mac_addr[4] = (u8)(data_lo >> 8);
- mac_addr[3] = (u8)(data_lo >> 16);
- mac_addr[2] = (u8)(data_lo >> 24);
-
- mac_addr[1] = (u8)data_hi;
- mac_addr[0] = (u8)(data_hi >> 8);
- rc = 0;
+ goto unlock_alu;
}
+
+ ret = ksz_read64(dev, regs[REG_IND_DATA_HI], &buf);
+ if (ret)
+ goto unlock_alu;
+
+ data_hi = (u32)(buf >> 32);
+ data_lo = (u32)buf;
+
+ /* Check out how many valid entry in the table. */
+ cnt = data & masks[DYNAMIC_MAC_TABLE_ENTRIES_H];
+ cnt <<= shifts[DYNAMIC_MAC_ENTRIES_H];
+ cnt |= (data_hi & masks[DYNAMIC_MAC_TABLE_ENTRIES]) >>
+ shifts[DYNAMIC_MAC_ENTRIES];
+ *entries = cnt + 1;
+
+ *fid = (data_hi & masks[DYNAMIC_MAC_TABLE_FID]) >>
+ shifts[DYNAMIC_MAC_FID];
+ *src_port = (data_hi & masks[DYNAMIC_MAC_TABLE_SRC_PORT]) >>
+ shifts[DYNAMIC_MAC_SRC_PORT];
+
+ mac_addr[5] = (u8)data_lo;
+ mac_addr[4] = (u8)(data_lo >> 8);
+ mac_addr[3] = (u8)(data_lo >> 16);
+ mac_addr[2] = (u8)(data_lo >> 24);
+
+ mac_addr[1] = (u8)data_hi;
+ mac_addr[0] = (u8)(data_hi >> 8);
+
+unlock_alu:
mutex_unlock(&dev->alu_mutex);
- return rc;
+ return ret;
}
static int ksz8_r_sta_mac_table(struct ksz_device *dev, u16 addr,
@@ -1193,28 +1228,28 @@ void ksz8_flush_dyn_mac_table(struct ksz_device *dev, int port)
int ksz8_fdb_dump(struct ksz_device *dev, int port,
dsa_fdb_dump_cb_t *cb, void *data)
{
- int ret = 0;
- u16 i = 0;
- u16 entries = 0;
- u8 timestamp = 0;
- u8 fid;
- u8 src_port;
u8 mac[ETH_ALEN];
+ u8 src_port, fid;
+ u16 entries = 0;
+ int ret, i;
- do {
+ for (i = 0; i < KSZ8_DYN_MAC_ENTRIES; i++) {
ret = ksz8_r_dyn_mac_table(dev, i, mac, &fid, &src_port,
- &timestamp, &entries);
- if (!ret && port == src_port) {
+ &entries);
+ if (ret)
+ return ret;
+
+ if (i >= entries)
+ return 0;
+
+ if (port == src_port) {
ret = cb(mac, fid, false, data);
if (ret)
- break;
+ return ret;
}
- i++;
- } while (i < entries);
- if (i >= entries)
- ret = 0;
+ }
- return ret;
+ return 0;
}
static int ksz8_add_sta_mac(struct ksz_device *dev, int port,
@@ -1512,6 +1547,7 @@ void ksz8_port_setup(struct ksz_device *dev, int port, bool cpu_port)
{
struct dsa_switch *ds = dev->ds;
const u32 *masks;
+ int queues;
u8 member;
masks = dev->info->masks;
@@ -1519,19 +1555,20 @@ void ksz8_port_setup(struct ksz_device *dev, int port, bool cpu_port)
/* enable broadcast storm limit */
ksz_port_cfg(dev, port, P_BCAST_STORM_CTRL, PORT_BROADCAST_STORM, true);
- if (!ksz_is_ksz88x3(dev))
- ksz8795_set_prio_queue(dev, port, 4);
+ /* For KSZ88x3 enable only one queue by default, otherwise we won't
+ * be able to get rid of PCP prios on Port 2.
+ */
+ if (ksz_is_ksz88x3(dev))
+ queues = 1;
+ else
+ queues = dev->info->num_tx_queues;
- /* disable DiffServ priority */
- ksz_port_cfg(dev, port, P_PRIO_CTRL, PORT_DIFFSERV_ENABLE, false);
+ ksz8_port_queue_split(dev, port, queues);
/* replace priority */
ksz_port_cfg(dev, port, P_802_1P_CTRL,
masks[PORT_802_1P_REMAPPING], false);
- /* enable 802.1p priority */
- ksz_port_cfg(dev, port, P_PRIO_CTRL, PORT_802_1P_ENABLE, true);
-
if (cpu_port)
member = dsa_user_ports(ds);
else
@@ -1701,11 +1738,15 @@ static void ksz8_cpu_port_link_up(struct ksz_device *dev, int speed, int duplex,
SW_10_MBIT, ctrl);
}
-void ksz8_phylink_mac_link_up(struct ksz_device *dev, int port,
- unsigned int mode, phy_interface_t interface,
- struct phy_device *phydev, int speed, int duplex,
+void ksz8_phylink_mac_link_up(struct phylink_config *config,
+ struct phy_device *phydev, unsigned int mode,
+ phy_interface_t interface, int speed, int duplex,
bool tx_pause, bool rx_pause)
{
+ struct dsa_port *dp = dsa_phylink_to_port(config);
+ struct ksz_device *dev = dp->ds->priv;
+ int port = dp->index;
+
/* If the port is the CPU port, apply special handling. Only the CPU
* port is configured via global registers.
*/
diff --git a/drivers/net/dsa/microchip/ksz8795_reg.h b/drivers/net/dsa/microchip/ksz8795_reg.h
index 7c9341ef73..69566a5d9c 100644
--- a/drivers/net/dsa/microchip/ksz8795_reg.h
+++ b/drivers/net/dsa/microchip/ksz8795_reg.h
@@ -124,7 +124,8 @@
#define PORT_BASED_PRIO_3 3
#define PORT_INSERT_TAG BIT(2)
#define PORT_REMOVE_TAG BIT(1)
-#define PORT_QUEUE_SPLIT_L BIT(0)
+#define KSZ8795_PORT_2QUEUE_SPLIT_EN BIT(0)
+#define KSZ8873_PORT_4QUEUE_SPLIT_EN BIT(0)
#define REG_PORT_1_CTRL_1 0x11
#define REG_PORT_2_CTRL_1 0x21
@@ -143,6 +144,7 @@
#define REG_PORT_4_CTRL_2 0x42
#define REG_PORT_5_CTRL_2 0x52
+#define KSZ8873_PORT_2QUEUE_SPLIT_EN BIT(7)
#define PORT_INGRESS_FILTER BIT(6)
#define PORT_DISCARD_NON_VID BIT(5)
#define PORT_FORCE_FLOW_CTRL BIT(4)
@@ -463,10 +465,7 @@
#define REG_PORT_4_CTRL_13 0xE1
#define REG_PORT_5_CTRL_13 0xF1
-#define PORT_QUEUE_SPLIT_H BIT(1)
-#define PORT_QUEUE_SPLIT_1 0
-#define PORT_QUEUE_SPLIT_2 1
-#define PORT_QUEUE_SPLIT_4 2
+#define KSZ8795_PORT_4QUEUE_SPLIT_EN BIT(1)
#define PORT_DROP_TAG BIT(0)
#define REG_PORT_1_CTRL_14 0xB2
@@ -794,5 +793,6 @@
#define TAIL_TAG_LOOKUP BIT(7)
#define FID_ENTRIES 128
+#define KSZ8_DYN_MAC_ENTRIES 1024
#endif
diff --git a/drivers/net/dsa/microchip/ksz9477.c b/drivers/net/dsa/microchip/ksz9477.c
index dde5c65c2c..425e20daf1 100644
--- a/drivers/net/dsa/microchip/ksz9477.c
+++ b/drivers/net/dsa/microchip/ksz9477.c
@@ -427,6 +427,57 @@ void ksz9477_freeze_mib(struct ksz_device *dev, int port, bool freeze)
mutex_unlock(&p->mib.cnt_mutex);
}
+int ksz9477_errata_monitor(struct ksz_device *dev, int port,
+ u64 tx_late_col)
+{
+ u32 pmavbc;
+ u8 status;
+ u16 pqm;
+ int ret;
+
+ ret = ksz_pread8(dev, port, REG_PORT_STATUS_0, &status);
+ if (ret)
+ return ret;
+ if (!(FIELD_GET(PORT_INTF_SPEED_MASK, status) == PORT_INTF_SPEED_NONE) &&
+ !(status & PORT_INTF_FULL_DUPLEX)) {
+ /* Errata DS80000754 recommends monitoring potential faults in
+ * half-duplex mode. The switch might not be able to communicate anymore
+ * in these states.
+ * If you see this message, please read the errata-sheet for more information:
+ * https://ww1.microchip.com/downloads/aemDocuments/documents/UNG/ProductDocuments/Errata/KSZ9477S-Errata-DS80000754.pdf
+ * To workaround this issue, half-duplex mode should be avoided.
+ * A software reset could be implemented to recover from this state.
+ */
+ dev_warn_once(dev->dev,
+ "Half-duplex detected on port %d, transmission halt may occur\n",
+ port);
+ if (tx_late_col != 0) {
+ /* Transmission halt with late collisions */
+ dev_crit_once(dev->dev,
+ "TX late collisions detected, transmission may be halted on port %d\n",
+ port);
+ }
+ ret = ksz_read8(dev, REG_SW_LUE_CTRL_0, &status);
+ if (ret)
+ return ret;
+ if (status & SW_VLAN_ENABLE) {
+ ret = ksz_pread16(dev, port, REG_PORT_QM_TX_CNT_0__4, &pqm);
+ if (ret)
+ return ret;
+ ret = ksz_read32(dev, REG_PMAVBC, &pmavbc);
+ if (ret)
+ return ret;
+ if ((FIELD_GET(PMAVBC_MASK, pmavbc) <= PMAVBC_MIN) ||
+ (FIELD_GET(PORT_QM_TX_CNT_M, pqm) >= PORT_QM_TX_CNT_MAX)) {
+ /* Transmission halt with Half-Duplex and VLAN */
+ dev_crit_once(dev->dev,
+ "resources out of limits, transmission may be halted\n");
+ }
+ }
+ }
+ return ret;
+}
+
void ksz9477_port_init_cnt(struct ksz_device *dev, int port)
{
struct ksz_port_mib *mib = &dev->ports[port].mib;
@@ -1156,18 +1207,12 @@ void ksz9477_port_setup(struct ksz_device *dev, int port, bool cpu_port)
/* enable broadcast storm limit */
ksz_port_cfg(dev, port, P_BCAST_STORM_CTRL, PORT_BROADCAST_STORM, true);
- /* disable DiffServ priority */
- ksz_port_cfg(dev, port, P_PRIO_CTRL, PORT_DIFFSERV_PRIO_ENABLE, false);
-
/* replace priority */
ksz_port_cfg(dev, port, REG_PORT_MRI_MAC_CTRL, PORT_USER_PRIO_CEILING,
false);
ksz9477_port_cfg32(dev, port, REG_PORT_MTI_QUEUE_CTRL_0__4,
MTI_PVID_REPLACE, false);
- /* enable 802.1p priority */
- ksz_port_cfg(dev, port, P_PRIO_CTRL, PORT_802_1P_PRIO_ENABLE, true);
-
/* force flow control for non-PHY ports only */
ksz_port_cfg(dev, port, REG_PORT_CTRL_0,
PORT_FORCE_TX_FLOW_CTRL | PORT_FORCE_RX_FLOW_CTRL,
diff --git a/drivers/net/dsa/microchip/ksz9477.h b/drivers/net/dsa/microchip/ksz9477.h
index ce1e656b80..239a281da1 100644
--- a/drivers/net/dsa/microchip/ksz9477.h
+++ b/drivers/net/dsa/microchip/ksz9477.h
@@ -36,6 +36,8 @@ int ksz9477_port_mirror_add(struct ksz_device *dev, int port,
bool ingress, struct netlink_ext_ack *extack);
void ksz9477_port_mirror_del(struct ksz_device *dev, int port,
struct dsa_mall_mirror_tc_entry *mirror);
+int ksz9477_errata_monitor(struct ksz_device *dev, int port,
+ u64 tx_late_col);
void ksz9477_get_caps(struct ksz_device *dev, int port,
struct phylink_config *config);
int ksz9477_fdb_dump(struct ksz_device *dev, int port,
diff --git a/drivers/net/dsa/microchip/ksz9477_reg.h b/drivers/net/dsa/microchip/ksz9477_reg.h
index fb124be8ed..d5354c600e 100644
--- a/drivers/net/dsa/microchip/ksz9477_reg.h
+++ b/drivers/net/dsa/microchip/ksz9477_reg.h
@@ -843,8 +843,8 @@
#define REG_PORT_STATUS_0 0x0030
-#define PORT_INTF_SPEED_M 0x3
-#define PORT_INTF_SPEED_S 3
+#define PORT_INTF_SPEED_MASK GENMASK(4, 3)
+#define PORT_INTF_SPEED_NONE GENMASK(1, 0)
#define PORT_INTF_FULL_DUPLEX BIT(2)
#define PORT_TX_FLOW_CTRL BIT(1)
#define PORT_RX_FLOW_CTRL BIT(0)
@@ -1168,6 +1168,11 @@
#define PORT_RMII_CLK_SEL BIT(7)
#define PORT_MII_SEL_EDGE BIT(5)
+#define REG_PMAVBC 0x03AC
+
+#define PMAVBC_MASK GENMASK(26, 16)
+#define PMAVBC_MIN 0x580
+
/* 4 - MAC */
#define REG_PORT_MAC_CTRL_0 0x0400
@@ -1495,6 +1500,7 @@
#define PORT_QM_TX_CNT_USED_S 0
#define PORT_QM_TX_CNT_M (BIT(11) - 1)
+#define PORT_QM_TX_CNT_MAX 0x200
#define REG_PORT_QM_TX_CNT_1__4 0x0A14
diff --git a/drivers/net/dsa/microchip/ksz9477_tc_flower.c b/drivers/net/dsa/microchip/ksz9477_tc_flower.c
index 8b2f5be667..ca7830ab16 100644
--- a/drivers/net/dsa/microchip/ksz9477_tc_flower.c
+++ b/drivers/net/dsa/microchip/ksz9477_tc_flower.c
@@ -124,6 +124,9 @@ static int ksz9477_flower_parse_key(struct ksz_device *dev, int port,
return -EOPNOTSUPP;
}
+ if (flow_rule_match_has_control_flags(rule, extack))
+ return -EOPNOTSUPP;
+
if (flow_rule_match_key(rule, FLOW_DISSECTOR_KEY_BASIC) ||
flow_rule_match_key(rule, FLOW_DISSECTOR_KEY_ETH_ADDRS)) {
ret = ksz9477_flower_parse_key_l2(dev, port, extack, rule,
diff --git a/drivers/net/dsa/microchip/ksz_common.c b/drivers/net/dsa/microchip/ksz_common.c
index e54f83a2e7..baa1eeb9a1 100644
--- a/drivers/net/dsa/microchip/ksz_common.c
+++ b/drivers/net/dsa/microchip/ksz_common.c
@@ -24,10 +24,12 @@
#include <linux/of_net.h>
#include <linux/micrel_phy.h>
#include <net/dsa.h>
+#include <net/ieee8021q.h>
#include <net/pkt_cls.h>
#include <net/switchdev.h>
#include "ksz_common.h"
+#include "ksz_dcb.h"
#include "ksz_ptp.h"
#include "ksz8.h"
#include "ksz9477.h"
@@ -253,6 +255,28 @@ static const struct ksz_drive_strength ksz8830_drive_strengths[] = {
{ KSZ8873_DRIVE_STRENGTH_16MA, 16000 },
};
+static void ksz8830_phylink_mac_config(struct phylink_config *config,
+ unsigned int mode,
+ const struct phylink_link_state *state);
+static void ksz_phylink_mac_config(struct phylink_config *config,
+ unsigned int mode,
+ const struct phylink_link_state *state);
+static void ksz_phylink_mac_link_down(struct phylink_config *config,
+ unsigned int mode,
+ phy_interface_t interface);
+
+static const struct phylink_mac_ops ksz8830_phylink_mac_ops = {
+ .mac_config = ksz8830_phylink_mac_config,
+ .mac_link_down = ksz_phylink_mac_link_down,
+ .mac_link_up = ksz8_phylink_mac_link_up,
+};
+
+static const struct phylink_mac_ops ksz8_phylink_mac_ops = {
+ .mac_config = ksz_phylink_mac_config,
+ .mac_link_down = ksz_phylink_mac_link_down,
+ .mac_link_up = ksz8_phylink_mac_link_up,
+};
+
static const struct ksz_dev_ops ksz8_dev_ops = {
.setup = ksz8_setup,
.get_port_addr = ksz8_get_port_addr,
@@ -277,7 +301,6 @@ static const struct ksz_dev_ops ksz8_dev_ops = {
.mirror_add = ksz8_port_mirror_add,
.mirror_del = ksz8_port_mirror_del,
.get_caps = ksz8_get_caps,
- .phylink_mac_link_up = ksz8_phylink_mac_link_up,
.config_cpu_port = ksz8_config_cpu_port,
.enable_stp_addr = ksz8_enable_stp_addr,
.reset = ksz8_reset_switch,
@@ -286,13 +309,19 @@ static const struct ksz_dev_ops ksz8_dev_ops = {
.change_mtu = ksz8_change_mtu,
};
-static void ksz9477_phylink_mac_link_up(struct ksz_device *dev, int port,
+static void ksz9477_phylink_mac_link_up(struct phylink_config *config,
+ struct phy_device *phydev,
unsigned int mode,
phy_interface_t interface,
- struct phy_device *phydev, int speed,
- int duplex, bool tx_pause,
+ int speed, int duplex, bool tx_pause,
bool rx_pause);
+static const struct phylink_mac_ops ksz9477_phylink_mac_ops = {
+ .mac_config = ksz_phylink_mac_config,
+ .mac_link_down = ksz_phylink_mac_link_down,
+ .mac_link_up = ksz9477_phylink_mac_link_up,
+};
+
static const struct ksz_dev_ops ksz9477_dev_ops = {
.setup = ksz9477_setup,
.get_port_addr = ksz9477_get_port_addr,
@@ -319,7 +348,6 @@ static const struct ksz_dev_ops ksz9477_dev_ops = {
.mdb_add = ksz9477_mdb_add,
.mdb_del = ksz9477_mdb_del,
.change_mtu = ksz9477_change_mtu,
- .phylink_mac_link_up = ksz9477_phylink_mac_link_up,
.get_wol = ksz9477_get_wol,
.set_wol = ksz9477_set_wol,
.wol_pre_shutdown = ksz9477_wol_pre_shutdown,
@@ -331,6 +359,12 @@ static const struct ksz_dev_ops ksz9477_dev_ops = {
.exit = ksz9477_switch_exit,
};
+static const struct phylink_mac_ops lan937x_phylink_mac_ops = {
+ .mac_config = ksz_phylink_mac_config,
+ .mac_link_down = ksz_phylink_mac_link_down,
+ .mac_link_up = ksz9477_phylink_mac_link_up,
+};
+
static const struct ksz_dev_ops lan937x_dev_ops = {
.setup = lan937x_setup,
.teardown = lan937x_teardown,
@@ -359,7 +393,6 @@ static const struct ksz_dev_ops lan937x_dev_ops = {
.mdb_add = ksz9477_mdb_add,
.mdb_del = ksz9477_mdb_del,
.change_mtu = lan937x_change_mtu,
- .phylink_mac_link_up = ksz9477_phylink_mac_link_up,
.config_cpu_port = lan937x_config_cpu_port,
.tc_cbs_set_cinc = lan937x_tc_cbs_set_cinc,
.enable_stp_addr = ksz9477_enable_stp_addr,
@@ -1194,9 +1227,10 @@ const struct ksz_chip_data ksz_switch_chips[] = {
.port_cnt = 3, /* total port count */
.port_nirqs = 3,
.num_tx_queues = 4,
+ .num_ipms = 8,
.tc_cbs_supported = true,
- .tc_ets_supported = true,
.ops = &ksz9477_dev_ops,
+ .phylink_mac_ops = &ksz9477_phylink_mac_ops,
.mib_names = ksz9477_mib_names,
.mib_cnt = ARRAY_SIZE(ksz9477_mib_names),
.reg_mib_cnt = MIB_COUNTER_NUM,
@@ -1223,7 +1257,9 @@ const struct ksz_chip_data ksz_switch_chips[] = {
.cpu_ports = 0x10, /* can be configured as cpu port */
.port_cnt = 5, /* total cpu and user ports */
.num_tx_queues = 4,
+ .num_ipms = 4,
.ops = &ksz8_dev_ops,
+ .phylink_mac_ops = &ksz8_phylink_mac_ops,
.ksz87xx_eee_link_erratum = true,
.mib_names = ksz9477_mib_names,
.mib_cnt = ARRAY_SIZE(ksz9477_mib_names),
@@ -1262,7 +1298,9 @@ const struct ksz_chip_data ksz_switch_chips[] = {
.cpu_ports = 0x10, /* can be configured as cpu port */
.port_cnt = 5, /* total cpu and user ports */
.num_tx_queues = 4,
+ .num_ipms = 4,
.ops = &ksz8_dev_ops,
+ .phylink_mac_ops = &ksz8_phylink_mac_ops,
.ksz87xx_eee_link_erratum = true,
.mib_names = ksz9477_mib_names,
.mib_cnt = ARRAY_SIZE(ksz9477_mib_names),
@@ -1287,7 +1325,9 @@ const struct ksz_chip_data ksz_switch_chips[] = {
.cpu_ports = 0x10, /* can be configured as cpu port */
.port_cnt = 5, /* total cpu and user ports */
.num_tx_queues = 4,
+ .num_ipms = 4,
.ops = &ksz8_dev_ops,
+ .phylink_mac_ops = &ksz8_phylink_mac_ops,
.ksz87xx_eee_link_erratum = true,
.mib_names = ksz9477_mib_names,
.mib_cnt = ARRAY_SIZE(ksz9477_mib_names),
@@ -1312,7 +1352,9 @@ const struct ksz_chip_data ksz_switch_chips[] = {
.cpu_ports = 0x4, /* can be configured as cpu port */
.port_cnt = 3,
.num_tx_queues = 4,
+ .num_ipms = 4,
.ops = &ksz8_dev_ops,
+ .phylink_mac_ops = &ksz8830_phylink_mac_ops,
.mib_names = ksz88xx_mib_names,
.mib_cnt = ARRAY_SIZE(ksz88xx_mib_names),
.reg_mib_cnt = MIB_COUNTER_NUM,
@@ -1336,9 +1378,11 @@ const struct ksz_chip_data ksz_switch_chips[] = {
.port_cnt = 7, /* total physical port count */
.port_nirqs = 4,
.num_tx_queues = 4,
+ .num_ipms = 8,
.tc_cbs_supported = true,
- .tc_ets_supported = true,
.ops = &ksz9477_dev_ops,
+ .phylink_mac_ops = &ksz9477_phylink_mac_ops,
+ .phy_errata_9477 = true,
.mib_names = ksz9477_mib_names,
.mib_cnt = ARRAY_SIZE(ksz9477_mib_names),
.reg_mib_cnt = MIB_COUNTER_NUM,
@@ -1370,7 +1414,10 @@ const struct ksz_chip_data ksz_switch_chips[] = {
.port_cnt = 6, /* total physical port count */
.port_nirqs = 2,
.num_tx_queues = 4,
+ .num_ipms = 8,
.ops = &ksz9477_dev_ops,
+ .phylink_mac_ops = &ksz9477_phylink_mac_ops,
+ .phy_errata_9477 = true,
.mib_names = ksz9477_mib_names,
.mib_cnt = ARRAY_SIZE(ksz9477_mib_names),
.reg_mib_cnt = MIB_COUNTER_NUM,
@@ -1402,7 +1449,10 @@ const struct ksz_chip_data ksz_switch_chips[] = {
.port_cnt = 7, /* total physical port count */
.port_nirqs = 2,
.num_tx_queues = 4,
+ .num_ipms = 8,
.ops = &ksz9477_dev_ops,
+ .phylink_mac_ops = &ksz9477_phylink_mac_ops,
+ .phy_errata_9477 = true,
.mib_names = ksz9477_mib_names,
.mib_cnt = ARRAY_SIZE(ksz9477_mib_names),
.reg_mib_cnt = MIB_COUNTER_NUM,
@@ -1432,7 +1482,9 @@ const struct ksz_chip_data ksz_switch_chips[] = {
.port_cnt = 3, /* total port count */
.port_nirqs = 2,
.num_tx_queues = 4,
+ .num_ipms = 8,
.ops = &ksz9477_dev_ops,
+ .phylink_mac_ops = &ksz9477_phylink_mac_ops,
.mib_names = ksz9477_mib_names,
.mib_cnt = ARRAY_SIZE(ksz9477_mib_names),
.reg_mib_cnt = MIB_COUNTER_NUM,
@@ -1458,9 +1510,10 @@ const struct ksz_chip_data ksz_switch_chips[] = {
.port_cnt = 3, /* total port count */
.port_nirqs = 3,
.num_tx_queues = 4,
+ .num_ipms = 8,
.tc_cbs_supported = true,
- .tc_ets_supported = true,
.ops = &ksz9477_dev_ops,
+ .phylink_mac_ops = &ksz9477_phylink_mac_ops,
.mib_names = ksz9477_mib_names,
.mib_cnt = ARRAY_SIZE(ksz9477_mib_names),
.reg_mib_cnt = MIB_COUNTER_NUM,
@@ -1486,9 +1539,11 @@ const struct ksz_chip_data ksz_switch_chips[] = {
.port_cnt = 7, /* total port count */
.port_nirqs = 3,
.num_tx_queues = 4,
+ .num_ipms = 8,
.tc_cbs_supported = true,
- .tc_ets_supported = true,
.ops = &ksz9477_dev_ops,
+ .phylink_mac_ops = &ksz9477_phylink_mac_ops,
+ .phy_errata_9477 = true,
.mib_names = ksz9477_mib_names,
.mib_cnt = ARRAY_SIZE(ksz9477_mib_names),
.reg_mib_cnt = MIB_COUNTER_NUM,
@@ -1519,8 +1574,8 @@ const struct ksz_chip_data ksz_switch_chips[] = {
.port_cnt = 7, /* total physical port count */
.port_nirqs = 3,
.num_tx_queues = 4,
+ .num_ipms = 8,
.tc_cbs_supported = true,
- .tc_ets_supported = true,
.ops = &ksz9477_dev_ops,
.mib_names = ksz9477_mib_names,
.mib_cnt = ARRAY_SIZE(ksz9477_mib_names),
@@ -1551,9 +1606,10 @@ const struct ksz_chip_data ksz_switch_chips[] = {
.port_cnt = 5, /* total physical port count */
.port_nirqs = 6,
.num_tx_queues = 8,
+ .num_ipms = 8,
.tc_cbs_supported = true,
- .tc_ets_supported = true,
.ops = &lan937x_dev_ops,
+ .phylink_mac_ops = &lan937x_phylink_mac_ops,
.mib_names = ksz9477_mib_names,
.mib_cnt = ARRAY_SIZE(ksz9477_mib_names),
.reg_mib_cnt = MIB_COUNTER_NUM,
@@ -1578,9 +1634,10 @@ const struct ksz_chip_data ksz_switch_chips[] = {
.port_cnt = 6, /* total physical port count */
.port_nirqs = 6,
.num_tx_queues = 8,
+ .num_ipms = 8,
.tc_cbs_supported = true,
- .tc_ets_supported = true,
.ops = &lan937x_dev_ops,
+ .phylink_mac_ops = &lan937x_phylink_mac_ops,
.mib_names = ksz9477_mib_names,
.mib_cnt = ARRAY_SIZE(ksz9477_mib_names),
.reg_mib_cnt = MIB_COUNTER_NUM,
@@ -1605,9 +1662,10 @@ const struct ksz_chip_data ksz_switch_chips[] = {
.port_cnt = 8, /* total physical port count */
.port_nirqs = 6,
.num_tx_queues = 8,
+ .num_ipms = 8,
.tc_cbs_supported = true,
- .tc_ets_supported = true,
.ops = &lan937x_dev_ops,
+ .phylink_mac_ops = &lan937x_phylink_mac_ops,
.mib_names = ksz9477_mib_names,
.mib_cnt = ARRAY_SIZE(ksz9477_mib_names),
.reg_mib_cnt = MIB_COUNTER_NUM,
@@ -1636,9 +1694,10 @@ const struct ksz_chip_data ksz_switch_chips[] = {
.port_cnt = 5, /* total physical port count */
.port_nirqs = 6,
.num_tx_queues = 8,
+ .num_ipms = 8,
.tc_cbs_supported = true,
- .tc_ets_supported = true,
.ops = &lan937x_dev_ops,
+ .phylink_mac_ops = &lan937x_phylink_mac_ops,
.mib_names = ksz9477_mib_names,
.mib_cnt = ARRAY_SIZE(ksz9477_mib_names),
.reg_mib_cnt = MIB_COUNTER_NUM,
@@ -1667,9 +1726,10 @@ const struct ksz_chip_data ksz_switch_chips[] = {
.port_cnt = 8, /* total physical port count */
.port_nirqs = 6,
.num_tx_queues = 8,
+ .num_ipms = 8,
.tc_cbs_supported = true,
- .tc_ets_supported = true,
.ops = &lan937x_dev_ops,
+ .phylink_mac_ops = &lan937x_phylink_mac_ops,
.mib_names = ksz9477_mib_names,
.mib_cnt = ARRAY_SIZE(ksz9477_mib_names),
.reg_mib_cnt = MIB_COUNTER_NUM,
@@ -1764,6 +1824,7 @@ void ksz_r_mib_stats64(struct ksz_device *dev, int port)
struct rtnl_link_stats64 *stats;
struct ksz_stats_raw *raw;
struct ksz_port_mib *mib;
+ int ret;
mib = &dev->ports[port].mib;
stats = &mib->stats64;
@@ -1805,6 +1866,12 @@ void ksz_r_mib_stats64(struct ksz_device *dev, int port)
pstats->rx_pause_frames = raw->rx_pause;
spin_unlock(&mib->stats64_lock);
+
+ if (dev->info->phy_errata_9477) {
+ ret = ksz9477_errata_monitor(dev, port, raw->tx_late_col);
+ if (ret)
+ dev_err(dev->dev, "Failed to monitor transmission halt\n");
+ }
}
void ksz88xx_r_mib_stats64(struct ksz_device *dev, int port)
@@ -2304,6 +2371,7 @@ static int ksz_setup(struct dsa_switch *ds)
ksz_init_mib_timer(dev);
ds->configure_vlan_while_not_filtering = false;
+ ds->dscp_prio_mapping_is_global = true;
if (dev->dev_ops->setup) {
ret = dev->dev_ops->setup(ds);
@@ -2347,6 +2415,10 @@ static int ksz_setup(struct dsa_switch *ds)
goto out_ptp_clock_unregister;
}
+ ret = ksz_dcb_init(dev);
+ if (ret)
+ goto out_ptp_clock_unregister;
+
/* start switch */
regmap_update_bits(ksz_regmap_8(dev), regs[S_START_CTRL],
SW_START, SW_START);
@@ -2523,14 +2595,15 @@ static u32 ksz_get_phy_flags(struct dsa_switch *ds, int port)
return 0;
}
-static void ksz_mac_link_down(struct dsa_switch *ds, int port,
- unsigned int mode, phy_interface_t interface)
+static void ksz_phylink_mac_link_down(struct phylink_config *config,
+ unsigned int mode,
+ phy_interface_t interface)
{
- struct ksz_device *dev = ds->priv;
- struct ksz_port *p = &dev->ports[port];
+ struct dsa_port *dp = dsa_phylink_to_port(config);
+ struct ksz_device *dev = dp->ds->priv;
/* Read all MIB counters when the link is going down. */
- p->read = true;
+ dev->ports[dp->index].read = true;
/* timer started */
if (dev->mib_read_interval)
schedule_delayed_work(&dev->mib_read, 0);
@@ -2660,9 +2733,33 @@ static int ksz_port_mdb_del(struct dsa_switch *ds, int port,
return dev->dev_ops->mdb_del(dev, port, mdb, db);
}
+static int ksz9477_set_default_prio_queue_mapping(struct ksz_device *dev,
+ int port)
+{
+ u32 queue_map = 0;
+ int ipm;
+
+ for (ipm = 0; ipm < dev->info->num_ipms; ipm++) {
+ int queue;
+
+ /* Traffic Type (TT) is corresponding to the Internal Priority
+ * Map (IPM) in the switch. Traffic Class (TC) is
+ * corresponding to the queue in the switch.
+ */
+ queue = ieee8021q_tt_to_tc(ipm, dev->info->num_tx_queues);
+ if (queue < 0)
+ return queue;
+
+ queue_map |= queue << (ipm * KSZ9477_PORT_TC_MAP_S);
+ }
+
+ return ksz_pwrite32(dev, port, KSZ9477_PORT_MRI_TC_MAP__4, queue_map);
+}
+
static int ksz_port_setup(struct dsa_switch *ds, int port)
{
struct ksz_device *dev = ds->priv;
+ int ret;
if (!dsa_is_user_port(ds, port))
return 0;
@@ -2670,11 +2767,17 @@ static int ksz_port_setup(struct dsa_switch *ds, int port)
/* setup user port */
dev->dev_ops->port_setup(dev, port, false);
+ if (!is_ksz8(dev)) {
+ ret = ksz9477_set_default_prio_queue_mapping(dev, port);
+ if (ret)
+ return ret;
+ }
+
/* port_stp_state_set() will be called after to enable the port so
* there is no need to do anything.
*/
- return 0;
+ return ksz_dcb_init_port(dev, port);
}
void ksz_port_stp_state_set(struct dsa_switch *ds, int port, u8 state)
@@ -3065,16 +3168,23 @@ phy_interface_t ksz_get_xmii(struct ksz_device *dev, int port, bool gbit)
return interface;
}
-static void ksz_phylink_mac_config(struct dsa_switch *ds, int port,
+static void ksz8830_phylink_mac_config(struct phylink_config *config,
+ unsigned int mode,
+ const struct phylink_link_state *state)
+{
+ struct dsa_port *dp = dsa_phylink_to_port(config);
+ struct ksz_device *dev = dp->ds->priv;
+
+ dev->ports[dp->index].manual_flow = !(state->pause & MLO_PAUSE_AN);
+}
+
+static void ksz_phylink_mac_config(struct phylink_config *config,
unsigned int mode,
const struct phylink_link_state *state)
{
- struct ksz_device *dev = ds->priv;
-
- if (ksz_is_ksz88x3(dev)) {
- dev->ports[port].manual_flow = !(state->pause & MLO_PAUSE_AN);
- return;
- }
+ struct dsa_port *dp = dsa_phylink_to_port(config);
+ struct ksz_device *dev = dp->ds->priv;
+ int port = dp->index;
/* Internal PHYs */
if (dev->info->internal_phy[port])
@@ -3087,9 +3197,6 @@ static void ksz_phylink_mac_config(struct dsa_switch *ds, int port,
ksz_set_xmii(dev, port, state->interface);
- if (dev->dev_ops->phylink_mac_config)
- dev->dev_ops->phylink_mac_config(dev, port, mode, state);
-
if (dev->dev_ops->setup_rgmii_delay)
dev->dev_ops->setup_rgmii_delay(dev, port);
}
@@ -3187,13 +3294,16 @@ static void ksz_duplex_flowctrl(struct ksz_device *dev, int port, int duplex,
ksz_prmw8(dev, port, regs[P_XMII_CTRL_0], mask, val);
}
-static void ksz9477_phylink_mac_link_up(struct ksz_device *dev, int port,
+static void ksz9477_phylink_mac_link_up(struct phylink_config *config,
+ struct phy_device *phydev,
unsigned int mode,
phy_interface_t interface,
- struct phy_device *phydev, int speed,
- int duplex, bool tx_pause,
+ int speed, int duplex, bool tx_pause,
bool rx_pause)
{
+ struct dsa_port *dp = dsa_phylink_to_port(config);
+ struct ksz_device *dev = dp->ds->priv;
+ int port = dp->index;
struct ksz_port *p;
p = &dev->ports[port];
@@ -3209,18 +3319,6 @@ static void ksz9477_phylink_mac_link_up(struct ksz_device *dev, int port,
ksz_duplex_flowctrl(dev, port, duplex, tx_pause, rx_pause);
}
-static void ksz_phylink_mac_link_up(struct dsa_switch *ds, int port,
- unsigned int mode,
- phy_interface_t interface,
- struct phy_device *phydev, int speed,
- int duplex, bool tx_pause, bool rx_pause)
-{
- struct ksz_device *dev = ds->priv;
-
- dev->dev_ops->phylink_mac_link_up(dev, port, mode, interface, phydev,
- speed, duplex, tx_pause, rx_pause);
-}
-
static int ksz_switch_detect(struct ksz_device *dev)
{
u8 id1, id2, id4;
@@ -3522,7 +3620,7 @@ static int ksz_tc_ets_add(struct ksz_device *dev, int port,
for (tc_prio = 0; tc_prio < ARRAY_SIZE(p->priomap); tc_prio++) {
int queue;
- if (tc_prio > KSZ9477_MAX_TC_PRIO)
+ if (tc_prio >= dev->info->num_ipms)
break;
queue = ksz_ets_band_to_queue(p, p->priomap[tc_prio]);
@@ -3534,8 +3632,7 @@ static int ksz_tc_ets_add(struct ksz_device *dev, int port,
static int ksz_tc_ets_del(struct ksz_device *dev, int port)
{
- int ret, queue, tc_prio, s;
- u32 queue_map = 0;
+ int ret, queue;
/* To restore the default chip configuration, set all queues to use the
* WRR scheduler with a weight of 1.
@@ -3547,31 +3644,10 @@ static int ksz_tc_ets_del(struct ksz_device *dev, int port)
return ret;
}
- switch (dev->info->num_tx_queues) {
- case 2:
- s = 2;
- break;
- case 4:
- s = 1;
- break;
- case 8:
- s = 0;
- break;
- default:
- return -EINVAL;
- }
-
/* Revert the queue mapping for TC-priority to its default setting on
* the chip.
*/
- for (tc_prio = 0; tc_prio <= KSZ9477_MAX_TC_PRIO; tc_prio++) {
- int queue;
-
- queue = tc_prio >> s;
- queue_map |= queue << (tc_prio * KSZ9477_PORT_TC_MAP_S);
- }
-
- return ksz_pwrite32(dev, port, KSZ9477_PORT_MRI_TC_MAP__4, queue_map);
+ return ksz9477_set_default_prio_queue_mapping(dev, port);
}
static int ksz_tc_ets_validate(struct ksz_device *dev, int port,
@@ -3616,7 +3692,7 @@ static int ksz_tc_setup_qdisc_ets(struct dsa_switch *ds, int port,
struct ksz_device *dev = ds->priv;
int ret;
- if (!dev->info->tc_ets_supported)
+ if (is_ksz8(dev))
return -EOPNOTSUPP;
if (qopt->parent != TC_H_ROOT) {
@@ -3841,6 +3917,13 @@ static int ksz_hsr_join(struct dsa_switch *ds, int port, struct net_device *hsr,
return -EOPNOTSUPP;
}
+ /* KSZ9477 can only perform HSR offloading for up to two ports */
+ if (hweight8(dev->hsr_ports) >= 2) {
+ NL_SET_ERR_MSG_MOD(extack,
+ "Cannot offload more than two ports - using software HSR");
+ return -EOPNOTSUPP;
+ }
+
/* Self MAC address filtering, to avoid frames traversing
* the HSR ring more than once.
*/
@@ -3881,9 +3964,6 @@ static const struct dsa_switch_ops ksz_switch_ops = {
.phy_read = ksz_phy_read16,
.phy_write = ksz_phy_write16,
.phylink_get_caps = ksz_phylink_get_caps,
- .phylink_mac_config = ksz_phylink_mac_config,
- .phylink_mac_link_up = ksz_phylink_mac_link_up,
- .phylink_mac_link_down = ksz_mac_link_down,
.port_setup = ksz_port_setup,
.set_ageing_time = ksz_set_ageing_time,
.get_strings = ksz_get_strings,
@@ -3925,6 +4005,13 @@ static const struct dsa_switch_ops ksz_switch_ops = {
.port_setup_tc = ksz_setup_tc,
.get_mac_eee = ksz_get_mac_eee,
.set_mac_eee = ksz_set_mac_eee,
+ .port_get_default_prio = ksz_port_get_default_prio,
+ .port_set_default_prio = ksz_port_set_default_prio,
+ .port_get_dscp_prio = ksz_port_get_dscp_prio,
+ .port_add_dscp_prio = ksz_port_add_dscp_prio,
+ .port_del_dscp_prio = ksz_port_del_dscp_prio,
+ .port_get_apptrust = ksz_port_get_apptrust,
+ .port_set_apptrust = ksz_port_set_apptrust,
};
struct ksz_device *ksz_switch_alloc(struct device *base, void *priv)
@@ -4328,6 +4415,9 @@ int ksz_switch_register(struct ksz_device *dev)
/* set the real number of ports */
dev->ds->num_ports = dev->info->port_cnt;
+ /* set the phylink ops */
+ dev->ds->phylink_mac_ops = dev->info->phylink_mac_ops;
+
/* Host port interface will be self detected, or specifically set in
* device tree.
*/
diff --git a/drivers/net/dsa/microchip/ksz_common.h b/drivers/net/dsa/microchip/ksz_common.h
index 40c11b0d6b..ee7db46e46 100644
--- a/drivers/net/dsa/microchip/ksz_common.h
+++ b/drivers/net/dsa/microchip/ksz_common.h
@@ -19,9 +19,13 @@
#include "ksz_ptp.h"
#define KSZ_MAX_NUM_PORTS 8
+/* all KSZ switches count ports from 1 */
+#define KSZ_PORT_1 0
+#define KSZ_PORT_2 1
struct ksz_device;
struct ksz_port;
+struct phylink_mac_ops;
enum ksz_regmap_width {
KSZ_REGMAP_8,
@@ -58,9 +62,11 @@ struct ksz_chip_data {
int port_cnt;
u8 port_nirqs;
u8 num_tx_queues;
+ u8 num_ipms; /* number of Internal Priority Maps */
bool tc_cbs_supported;
- bool tc_ets_supported;
const struct ksz_dev_ops *ops;
+ const struct phylink_mac_ops *phylink_mac_ops;
+ bool phy_errata_9477;
bool ksz87xx_eee_link_erratum;
const struct ksz_mib_names *mib_names;
int mib_cnt;
@@ -349,9 +355,6 @@ struct ksz_dev_ops {
int (*change_mtu)(struct ksz_device *dev, int port, int mtu);
void (*freeze_mib)(struct ksz_device *dev, int port, bool freeze);
void (*port_init_cnt)(struct ksz_device *dev, int port);
- void (*phylink_mac_config)(struct ksz_device *dev, int port,
- unsigned int mode,
- const struct phylink_link_state *state);
void (*phylink_mac_link_up)(struct ksz_device *dev, int port,
unsigned int mode,
phy_interface_t interface,
@@ -620,6 +623,11 @@ static inline bool ksz_is_ksz88x3(struct ksz_device *dev)
return dev->chip_id == KSZ8830_CHIP_ID;
}
+static inline bool is_ksz8(struct ksz_device *dev)
+{
+ return ksz_is_ksz87xx(dev) || ksz_is_ksz88x3(dev);
+}
+
static inline int is_lan937x(struct ksz_device *dev)
{
return dev->chip_id == LAN9370_CHIP_ID ||
@@ -722,7 +730,6 @@ static inline int is_lan937x(struct ksz_device *dev)
#define KSZ9477_PORT_MRI_TC_MAP__4 0x0808
#define KSZ9477_PORT_TC_MAP_S 4
-#define KSZ9477_MAX_TC_PRIO 7
/* CBS related registers */
#define REG_PORT_MTI_QUEUE_INDEX__4 0x0900
diff --git a/drivers/net/dsa/microchip/ksz_dcb.c b/drivers/net/dsa/microchip/ksz_dcb.c
new file mode 100644
index 0000000000..086bc9b3cf
--- /dev/null
+++ b/drivers/net/dsa/microchip/ksz_dcb.c
@@ -0,0 +1,819 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2024 Pengutronix, Oleksij Rempel <kernel@pengutronix.de>
+
+#include <linux/dsa/ksz_common.h>
+#include <net/dsa.h>
+#include <net/dscp.h>
+#include <net/ieee8021q.h>
+
+#include "ksz_common.h"
+#include "ksz_dcb.h"
+#include "ksz8.h"
+
+#define KSZ8_REG_PORT_1_CTRL_0 0x10
+#define KSZ8_PORT_DIFFSERV_ENABLE BIT(6)
+#define KSZ8_PORT_802_1P_ENABLE BIT(5)
+#define KSZ8_PORT_BASED_PRIO_M GENMASK(4, 3)
+
+#define KSZ88X3_REG_TOS_DSCP_CTRL 0x60
+#define KSZ8765_REG_TOS_DSCP_CTRL 0x90
+
+#define KSZ9477_REG_SW_MAC_TOS_CTRL 0x033e
+#define KSZ9477_SW_TOS_DSCP_REMAP BIT(0)
+#define KSZ9477_SW_TOS_DSCP_DEFAULT_PRIO_M GENMASK(5, 3)
+
+#define KSZ9477_REG_DIFFSERV_PRIO_MAP 0x0340
+
+#define KSZ9477_REG_PORT_MRI_PRIO_CTRL 0x0801
+#define KSZ9477_PORT_HIGHEST_PRIO BIT(7)
+#define KSZ9477_PORT_OR_PRIO BIT(6)
+#define KSZ9477_PORT_MAC_PRIO_ENABLE BIT(4)
+#define KSZ9477_PORT_VLAN_PRIO_ENABLE BIT(3)
+#define KSZ9477_PORT_802_1P_PRIO_ENABLE BIT(2)
+#define KSZ9477_PORT_DIFFSERV_PRIO_ENABLE BIT(1)
+#define KSZ9477_PORT_ACL_PRIO_ENABLE BIT(0)
+
+#define KSZ9477_REG_PORT_MRI_MAC_CTRL 0x0802
+#define KSZ9477_PORT_BASED_PRIO_M GENMASK(2, 0)
+
+struct ksz_apptrust_map {
+ u8 apptrust;
+ u8 bit;
+};
+
+static const struct ksz_apptrust_map ksz8_apptrust_map_to_bit[] = {
+ { DCB_APP_SEL_PCP, KSZ8_PORT_802_1P_ENABLE },
+ { IEEE_8021QAZ_APP_SEL_DSCP, KSZ8_PORT_DIFFSERV_ENABLE },
+};
+
+static const struct ksz_apptrust_map ksz9477_apptrust_map_to_bit[] = {
+ { DCB_APP_SEL_PCP, KSZ9477_PORT_802_1P_PRIO_ENABLE },
+ { IEEE_8021QAZ_APP_SEL_DSCP, KSZ9477_PORT_DIFFSERV_PRIO_ENABLE },
+};
+
+/* ksz_supported_apptrust[] - Supported apptrust selectors and Priority Order
+ * of Internal Priority Map (IPM) sources.
+ *
+ * This array defines the apptrust selectors supported by the hardware, where
+ * the index within the array indicates the priority of the selector - lower
+ * indices correspond to higher priority. This fixed priority scheme is due to
+ * the hardware's design, which does not support configurable priority among
+ * different priority sources.
+ *
+ * The priority sources, including Tail Tag, ACL, VLAN PCP and DSCP are ordered
+ * by the hardware's fixed logic, as detailed below. The order reflects a
+ * non-configurable precedence where certain types of priority information
+ * override others:
+ *
+ * 1. Tail Tag - Highest priority, overrides ACL, VLAN PCP, and DSCP priorities.
+ * 2. ACL - Overrides VLAN PCP and DSCP priorities.
+ * 3. VLAN PCP - Overrides DSCP priority.
+ * 4. DSCP - Lowest priority, does not override any other priority source.
+ *
+ * In this context, the array's lower index (higher priority) for
+ * 'DCB_APP_SEL_PCP' suggests its relative priority over
+ * 'IEEE_8021QAZ_APP_SEL_DSCP' within the system's fixed priority scheme.
+ *
+ * DCB_APP_SEL_PCP - Priority Code Point selector
+ * IEEE_8021QAZ_APP_SEL_DSCP - Differentiated Services Code Point selector
+ */
+static const u8 ksz_supported_apptrust[] = {
+ DCB_APP_SEL_PCP,
+ IEEE_8021QAZ_APP_SEL_DSCP,
+};
+
+static const char * const ksz_supported_apptrust_variants[] = {
+ "empty", "dscp", "pcp", "dscp pcp"
+};
+
+static void ksz_get_default_port_prio_reg(struct ksz_device *dev, int *reg,
+ u8 *mask, int *shift)
+{
+ if (is_ksz8(dev)) {
+ *reg = KSZ8_REG_PORT_1_CTRL_0;
+ *mask = KSZ8_PORT_BASED_PRIO_M;
+ *shift = __bf_shf(KSZ8_PORT_BASED_PRIO_M);
+ } else {
+ *reg = KSZ9477_REG_PORT_MRI_MAC_CTRL;
+ *mask = KSZ9477_PORT_BASED_PRIO_M;
+ *shift = __bf_shf(KSZ9477_PORT_BASED_PRIO_M);
+ }
+}
+
+/**
+ * ksz_get_dscp_prio_reg - Retrieves the DSCP-to-priority-mapping register
+ * @dev: Pointer to the KSZ switch device structure
+ * @reg: Pointer to the register address to be set
+ * @per_reg: Pointer to the number of DSCP values per register
+ * @mask: Pointer to the mask to be set
+ *
+ * This function retrieves the DSCP to priority mapping register, the number of
+ * DSCP values per register, and the mask to be set.
+ */
+static void ksz_get_dscp_prio_reg(struct ksz_device *dev, int *reg,
+ int *per_reg, u8 *mask)
+{
+ if (ksz_is_ksz87xx(dev)) {
+ *reg = KSZ8765_REG_TOS_DSCP_CTRL;
+ *per_reg = 4;
+ *mask = GENMASK(1, 0);
+ } else if (ksz_is_ksz88x3(dev)) {
+ *reg = KSZ88X3_REG_TOS_DSCP_CTRL;
+ *per_reg = 4;
+ *mask = GENMASK(1, 0);
+ } else {
+ *reg = KSZ9477_REG_DIFFSERV_PRIO_MAP;
+ *per_reg = 2;
+ *mask = GENMASK(2, 0);
+ }
+}
+
+/**
+ * ksz_get_apptrust_map_and_reg - Retrieves the apptrust map and register
+ * @dev: Pointer to the KSZ switch device structure
+ * @map: Pointer to the apptrust map to be set
+ * @reg: Pointer to the register address to be set
+ * @mask: Pointer to the mask to be set
+ *
+ * This function retrieves the apptrust map and register address for the
+ * apptrust configuration.
+ */
+static void ksz_get_apptrust_map_and_reg(struct ksz_device *dev,
+ const struct ksz_apptrust_map **map,
+ int *reg, u8 *mask)
+{
+ if (is_ksz8(dev)) {
+ *map = ksz8_apptrust_map_to_bit;
+ *reg = KSZ8_REG_PORT_1_CTRL_0;
+ *mask = KSZ8_PORT_DIFFSERV_ENABLE | KSZ8_PORT_802_1P_ENABLE;
+ } else {
+ *map = ksz9477_apptrust_map_to_bit;
+ *reg = KSZ9477_REG_PORT_MRI_PRIO_CTRL;
+ *mask = KSZ9477_PORT_802_1P_PRIO_ENABLE |
+ KSZ9477_PORT_DIFFSERV_PRIO_ENABLE;
+ }
+}
+
+/**
+ * ksz_port_get_default_prio - Retrieves the default priority for a port on a
+ * KSZ switch
+ * @ds: Pointer to the DSA switch structure
+ * @port: Port number from which to get the default priority
+ *
+ * This function fetches the default priority for the specified port on a KSZ
+ * switch.
+ *
+ * Return: The default priority of the port on success, or a negative error
+ * code on failure.
+ */
+int ksz_port_get_default_prio(struct dsa_switch *ds, int port)
+{
+ struct ksz_device *dev = ds->priv;
+ int ret, reg, shift;
+ u8 data, mask;
+
+ ksz_get_default_port_prio_reg(dev, &reg, &mask, &shift);
+
+ ret = ksz_pread8(dev, port, reg, &data);
+ if (ret)
+ return ret;
+
+ return (data & mask) >> shift;
+}
+
+/**
+ * ksz88x3_port_set_default_prio_quirks - Quirks for default priority
+ * @dev: Pointer to the KSZ switch device structure
+ * @port: Port number for which to set the default priority
+ * @prio: Priority value to set
+ *
+ * This function implements quirks for setting the default priority on KSZ88x3
+ * devices. On Port 2, no other priority providers are working
+ * except of PCP. So, configuring default priority on Port 2 is not possible.
+ * On Port 1, it is not possible to configure port priority if PCP
+ * apptrust on Port 2 is disabled. Since we disable multiple queues on the
+ * switch to disable PCP on Port 2, we need to ensure that the default priority
+ * configuration on Port 1 is in agreement with the configuration on Port 2.
+ *
+ * Return: 0 on success, or a negative error code on failure
+ */
+static int ksz88x3_port_set_default_prio_quirks(struct ksz_device *dev, int port,
+ u8 prio)
+{
+ if (!prio)
+ return 0;
+
+ if (port == KSZ_PORT_2) {
+ dev_err(dev->dev, "Port priority configuration is not working on Port 2\n");
+ return -EINVAL;
+ } else if (port == KSZ_PORT_1) {
+ u8 port2_data;
+ int ret;
+
+ ret = ksz_pread8(dev, KSZ_PORT_2, KSZ8_REG_PORT_1_CTRL_0,
+ &port2_data);
+ if (ret)
+ return ret;
+
+ if (!(port2_data & KSZ8_PORT_802_1P_ENABLE)) {
+ dev_err(dev->dev, "Not possible to configure port priority on Port 1 if PCP apptrust on Port 2 is disabled\n");
+ return -EINVAL;
+ }
+ }
+
+ return 0;
+}
+
+/**
+ * ksz_port_set_default_prio - Sets the default priority for a port on a KSZ
+ * switch
+ * @ds: Pointer to the DSA switch structure
+ * @port: Port number for which to set the default priority
+ * @prio: Priority value to set
+ *
+ * This function sets the default priority for the specified port on a KSZ
+ * switch.
+ *
+ * Return: 0 on success, or a negative error code on failure.
+ */
+int ksz_port_set_default_prio(struct dsa_switch *ds, int port, u8 prio)
+{
+ struct ksz_device *dev = ds->priv;
+ int reg, shift, ret;
+ u8 mask;
+
+ if (prio >= dev->info->num_ipms)
+ return -EINVAL;
+
+ if (ksz_is_ksz88x3(dev)) {
+ ret = ksz88x3_port_set_default_prio_quirks(dev, port, prio);
+ if (ret)
+ return ret;
+ }
+
+ ksz_get_default_port_prio_reg(dev, &reg, &mask, &shift);
+
+ return ksz_prmw8(dev, port, reg, mask, (prio << shift) & mask);
+}
+
+/**
+ * ksz_port_get_dscp_prio - Retrieves the priority for a DSCP value on a KSZ
+ * switch
+ * @ds: Pointer to the DSA switch structure
+ * @port: Port number for which to get the priority
+ * @dscp: DSCP value for which to get the priority
+ *
+ * This function fetches the priority value from switch global DSCP-to-priorty
+ * mapping table for the specified DSCP value.
+ *
+ * Return: The priority value for the DSCP on success, or a negative error
+ * code on failure.
+ */
+int ksz_port_get_dscp_prio(struct dsa_switch *ds, int port, u8 dscp)
+{
+ struct ksz_device *dev = ds->priv;
+ int reg, per_reg, ret, shift;
+ u8 data, mask;
+
+ ksz_get_dscp_prio_reg(dev, &reg, &per_reg, &mask);
+
+ /* If DSCP remapping is disabled, DSCP bits 3-5 are used as Internal
+ * Priority Map (IPM)
+ */
+ if (!is_ksz8(dev)) {
+ ret = ksz_read8(dev, KSZ9477_REG_SW_MAC_TOS_CTRL, &data);
+ if (ret)
+ return ret;
+
+ /* If DSCP remapping is disabled, DSCP bits 3-5 are used as
+ * Internal Priority Map (IPM)
+ */
+ if (!(data & KSZ9477_SW_TOS_DSCP_REMAP))
+ return FIELD_GET(KSZ9477_SW_TOS_DSCP_DEFAULT_PRIO_M,
+ dscp);
+ }
+
+ /* In case DSCP remapping is enabled, we need to write the DSCP to
+ * priority mapping table.
+ */
+ reg += dscp / per_reg;
+ ret = ksz_read8(dev, reg, &data);
+ if (ret)
+ return ret;
+
+ shift = (dscp % per_reg) * (8 / per_reg);
+
+ return (data >> shift) & mask;
+}
+
+/**
+ * ksz_set_global_dscp_entry - Sets the global DSCP-to-priority mapping entry
+ * @dev: Pointer to the KSZ switch device structure
+ * @dscp: DSCP value for which to set the priority
+ * @ipm: Priority value to set
+ *
+ * This function sets the global DSCP-to-priority mapping entry for the
+ * specified DSCP value.
+ *
+ * Return: 0 on success, or a negative error code on failure.
+ */
+static int ksz_set_global_dscp_entry(struct ksz_device *dev, u8 dscp, u8 ipm)
+{
+ int reg, per_reg, shift;
+ u8 mask;
+
+ ksz_get_dscp_prio_reg(dev, &reg, &per_reg, &mask);
+
+ shift = (dscp % per_reg) * (8 / per_reg);
+
+ return ksz_rmw8(dev, reg + (dscp / per_reg), mask << shift,
+ ipm << shift);
+}
+
+/**
+ * ksz_init_global_dscp_map - Initializes the global DSCP-to-priority mapping
+ * @dev: Pointer to the KSZ switch device structure
+ *
+ * This function initializes the global DSCP-to-priority mapping table for the
+ * switch.
+ *
+ * Return: 0 on success, or a negative error code on failure
+ */
+static int ksz_init_global_dscp_map(struct ksz_device *dev)
+{
+ int ret, dscp;
+
+ /* On KSZ9xxx variants, DSCP remapping is disabled by default.
+ * Enable to have, predictable and reproducible behavior across
+ * different devices.
+ */
+ if (!is_ksz8(dev)) {
+ ret = ksz_rmw8(dev, KSZ9477_REG_SW_MAC_TOS_CTRL,
+ KSZ9477_SW_TOS_DSCP_REMAP,
+ KSZ9477_SW_TOS_DSCP_REMAP);
+ if (ret)
+ return ret;
+ }
+
+ for (dscp = 0; dscp < DSCP_MAX; dscp++) {
+ int ipm, tt;
+
+ /* Map DSCP to Traffic Type, which is corresponding to the
+ * Internal Priority Map (IPM) in the switch.
+ */
+ if (!is_ksz8(dev)) {
+ ipm = ietf_dscp_to_ieee8021q_tt(dscp);
+ } else {
+ /* On KSZ8xxx variants we do not have IPM to queue
+ * remapping table. We need to convert DSCP to Traffic
+ * Type and then to queue.
+ */
+ tt = ietf_dscp_to_ieee8021q_tt(dscp);
+ if (tt < 0)
+ return tt;
+
+ ipm = ieee8021q_tt_to_tc(tt, dev->info->num_tx_queues);
+ }
+
+ if (ipm < 0)
+ return ipm;
+
+ ret = ksz_set_global_dscp_entry(dev, dscp, ipm);
+ }
+
+ return 0;
+}
+
+/**
+ * ksz_port_add_dscp_prio - Adds a DSCP-to-priority mapping entry for a port on
+ * a KSZ switch.
+ * @ds: Pointer to the DSA switch structure
+ * @port: Port number for which to add the DSCP-to-priority mapping entry
+ * @dscp: DSCP value for which to add the priority
+ * @prio: Priority value to set
+ *
+ * Return: 0 on success, or a negative error code on failure
+ */
+int ksz_port_add_dscp_prio(struct dsa_switch *ds, int port, u8 dscp, u8 prio)
+{
+ struct ksz_device *dev = ds->priv;
+
+ if (prio >= dev->info->num_ipms)
+ return -ERANGE;
+
+ return ksz_set_global_dscp_entry(dev, dscp, prio);
+}
+
+/**
+ * ksz_port_del_dscp_prio - Deletes a DSCP-to-priority mapping entry for a port
+ * on a KSZ switch.
+ * @ds: Pointer to the DSA switch structure
+ * @port: Port number for which to delete the DSCP-to-priority mapping entry
+ * @dscp: DSCP value for which to delete the priority
+ * @prio: Priority value to delete
+ *
+ * Return: 0 on success, or a negative error code on failure
+ */
+int ksz_port_del_dscp_prio(struct dsa_switch *ds, int port, u8 dscp, u8 prio)
+{
+ struct ksz_device *dev = ds->priv;
+ int ipm;
+
+ if (ksz_port_get_dscp_prio(ds, port, dscp) != prio)
+ return 0;
+
+ if (is_ksz8(dev)) {
+ ipm = ieee8021q_tt_to_tc(IEEE8021Q_TT_BE,
+ dev->info->num_tx_queues);
+ if (ipm < 0)
+ return ipm;
+ } else {
+ ipm = IEEE8021Q_TT_BE;
+ }
+
+ return ksz_set_global_dscp_entry(dev, dscp, ipm);
+}
+
+/**
+ * ksz_apptrust_error - Prints an error message for an invalid apptrust selector
+ * @dev: Pointer to the KSZ switch device structure
+ *
+ * This function prints an error message when an invalid apptrust selector is
+ * provided.
+ */
+static void ksz_apptrust_error(struct ksz_device *dev)
+{
+ char supported_apptrust_variants[64];
+ int i;
+
+ supported_apptrust_variants[0] = '\0';
+ for (i = 0; i < ARRAY_SIZE(ksz_supported_apptrust_variants); i++) {
+ if (i > 0)
+ strlcat(supported_apptrust_variants, ", ",
+ sizeof(supported_apptrust_variants));
+ strlcat(supported_apptrust_variants,
+ ksz_supported_apptrust_variants[i],
+ sizeof(supported_apptrust_variants));
+ }
+
+ dev_err(dev->dev, "Invalid apptrust selector or priority order. Supported: %s\n",
+ supported_apptrust_variants);
+}
+
+/**
+ * ksz_port_set_apptrust_validate - Validates the apptrust selectors
+ * @dev: Pointer to the KSZ switch device structure
+ * @port: Port number for which to set the apptrust selectors
+ * @sel: Array of apptrust selectors to validate
+ * @nsel: Number of apptrust selectors in the array
+ *
+ * This function validates the apptrust selectors provided and ensures that
+ * they are in the correct order.
+ *
+ * This family of switches supports two apptrust selectors: DCB_APP_SEL_PCP and
+ * IEEE_8021QAZ_APP_SEL_DSCP. The priority order of the selectors is fixed and
+ * cannot be changed. The order is as follows:
+ * 1. DCB_APP_SEL_PCP - Priority Code Point selector (highest priority)
+ * 2. IEEE_8021QAZ_APP_SEL_DSCP - Differentiated Services Code Point selector
+ * (lowest priority)
+ *
+ * Return: 0 on success, or a negative error code on failure
+ */
+static int ksz_port_set_apptrust_validate(struct ksz_device *dev, int port,
+ const u8 *sel, int nsel)
+{
+ int i, j, found;
+ int j_prev = 0;
+
+ /* Iterate through the requested selectors */
+ for (i = 0; i < nsel; i++) {
+ found = 0;
+
+ /* Check if the current selector is supported by the hardware */
+ for (j = 0; j < sizeof(ksz_supported_apptrust); j++) {
+ if (sel[i] != ksz_supported_apptrust[j])
+ continue;
+
+ found = 1;
+
+ /* Ensure that no higher priority selector (lower index)
+ * precedes a lower priority one
+ */
+ if (i > 0 && j <= j_prev)
+ goto err_sel_not_vaild;
+
+ j_prev = j;
+ break;
+ }
+
+ if (!found)
+ goto err_sel_not_vaild;
+ }
+
+ return 0;
+
+err_sel_not_vaild:
+ ksz_apptrust_error(dev);
+
+ return -EINVAL;
+}
+
+/**
+ * ksz88x3_port1_apptrust_quirk - Quirk for apptrust configuration on Port 1
+ * of KSZ88x3 devices
+ * @dev: Pointer to the KSZ switch device structure
+ * @port: Port number for which to set the apptrust selectors
+ * @reg: Register address for the apptrust configuration
+ * @port1_data: Data to set for the apptrust configuration
+ *
+ * This function implements a quirk for apptrust configuration on Port 1 of
+ * KSZ88x3 devices. It ensures that apptrust configuration on Port 1 is not
+ * possible if PCP apptrust on Port 2 is disabled. This is because the Port 2
+ * seems to be permanently hardwired to PCP classification, so we need to
+ * do Port 1 configuration always in agreement with Port 2 configuration.
+ *
+ * Return: 0 on success, or a negative error code on failure
+ */
+static int ksz88x3_port1_apptrust_quirk(struct ksz_device *dev, int port,
+ int reg, u8 port1_data)
+{
+ u8 port2_data;
+ int ret;
+
+ /* If no apptrust is requested for Port 1, no need to care about Port 2
+ * configuration.
+ */
+ if (!(port1_data & (KSZ8_PORT_802_1P_ENABLE | KSZ8_PORT_DIFFSERV_ENABLE)))
+ return 0;
+
+ /* We got request to enable any apptrust on Port 1. To make it possible,
+ * we need to enable multiple queues on the switch. If we enable
+ * multiqueue support, PCP classification on Port 2 will be
+ * automatically activated by HW.
+ */
+ ret = ksz_pread8(dev, KSZ_PORT_2, reg, &port2_data);
+ if (ret)
+ return ret;
+
+ /* If KSZ8_PORT_802_1P_ENABLE bit is set on Port 2, the driver showed
+ * the interest in PCP classification on Port 2. In this case,
+ * multiqueue support is enabled and we can enable any apptrust on
+ * Port 1.
+ * If KSZ8_PORT_802_1P_ENABLE bit is not set on Port 2, the PCP
+ * classification on Port 2 is still active, but the driver disabled
+ * multiqueue support and made frame prioritization inactive for
+ * all ports. In this case, we can't enable any apptrust on Port 1.
+ */
+ if (!(port2_data & KSZ8_PORT_802_1P_ENABLE)) {
+ dev_err(dev->dev, "Not possible to enable any apptrust on Port 1 if PCP apptrust on Port 2 is disabled\n");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+/**
+ * ksz88x3_port2_apptrust_quirk - Quirk for apptrust configuration on Port 2
+ * of KSZ88x3 devices
+ * @dev: Pointer to the KSZ switch device structure
+ * @port: Port number for which to set the apptrust selectors
+ * @reg: Register address for the apptrust configuration
+ * @port2_data: Data to set for the apptrust configuration
+ *
+ * This function implements a quirk for apptrust configuration on Port 2 of
+ * KSZ88x3 devices. It ensures that DSCP apptrust is not working on Port 2 and
+ * that it is not possible to disable PCP on Port 2. The only way to disable PCP
+ * on Port 2 is to disable multiple queues on the switch.
+ *
+ * Return: 0 on success, or a negative error code on failure
+ */
+static int ksz88x3_port2_apptrust_quirk(struct ksz_device *dev, int port,
+ int reg, u8 port2_data)
+{
+ struct dsa_switch *ds = dev->ds;
+ u8 port1_data;
+ int ret;
+
+ /* First validate Port 2 configuration. DiffServ/DSCP is not working
+ * on this port.
+ */
+ if (port2_data & KSZ8_PORT_DIFFSERV_ENABLE) {
+ dev_err(dev->dev, "DSCP apptrust is not working on Port 2\n");
+ return -EINVAL;
+ }
+
+ /* If PCP support is requested, we need to enable all queues on the
+ * switch to make PCP priority working on Port 2.
+ */
+ if (port2_data & KSZ8_PORT_802_1P_ENABLE)
+ return ksz8_all_queues_split(dev, dev->info->num_tx_queues);
+
+ /* We got request to disable PCP priority on Port 2.
+ * Now, we need to compare Port 2 configuration with Port 1
+ * configuration.
+ */
+ ret = ksz_pread8(dev, KSZ_PORT_1, reg, &port1_data);
+ if (ret)
+ return ret;
+
+ /* If Port 1 has any apptrust enabled, we can't disable multiple queues
+ * on the switch, so we can't disable PCP on Port 2.
+ */
+ if (port1_data & (KSZ8_PORT_802_1P_ENABLE | KSZ8_PORT_DIFFSERV_ENABLE)) {
+ dev_err(dev->dev, "Not possible to disable PCP on Port 2 if any apptrust is enabled on Port 1\n");
+ return -EINVAL;
+ }
+
+ /* Now we need to ensure that default priority on Port 1 is set to 0
+ * otherwise we can't disable multiqueue support on the switch.
+ */
+ ret = ksz_port_get_default_prio(ds, KSZ_PORT_1);
+ if (ret < 0) {
+ return ret;
+ } else if (ret) {
+ dev_err(dev->dev, "Not possible to disable PCP on Port 2 if non zero default priority is set on Port 1\n");
+ return -EINVAL;
+ }
+
+ /* Port 1 has no apptrust or default priority set and we got request to
+ * disable PCP on Port 2. We can disable multiqueue support to disable
+ * PCP on Port 2.
+ */
+ return ksz8_all_queues_split(dev, 1);
+}
+
+/**
+ * ksz88x3_port_apptrust_quirk - Quirk for apptrust configuration on KSZ88x3
+ * devices
+ * @dev: Pointer to the KSZ switch device structure
+ * @port: Port number for which to set the apptrust selectors
+ * @reg: Register address for the apptrust configuration
+ * @data: Data to set for the apptrust configuration
+ *
+ * This function implements a quirk for apptrust configuration on KSZ88x3
+ * devices. It ensures that apptrust configuration on Port 1 and
+ * Port 2 is done in agreement with each other.
+ *
+ * Return: 0 on success, or a negative error code on failure
+ */
+static int ksz88x3_port_apptrust_quirk(struct ksz_device *dev, int port,
+ int reg, u8 data)
+{
+ if (port == KSZ_PORT_1)
+ return ksz88x3_port1_apptrust_quirk(dev, port, reg, data);
+ else if (port == KSZ_PORT_2)
+ return ksz88x3_port2_apptrust_quirk(dev, port, reg, data);
+
+ return 0;
+}
+
+/**
+ * ksz_port_set_apptrust - Sets the apptrust selectors for a port on a KSZ
+ * switch
+ * @ds: Pointer to the DSA switch structure
+ * @port: Port number for which to set the apptrust selectors
+ * @sel: Array of apptrust selectors to set
+ * @nsel: Number of apptrust selectors in the array
+ *
+ * This function sets the apptrust selectors for the specified port on a KSZ
+ * switch.
+ *
+ * Return: 0 on success, or a negative error code on failure
+ */
+int ksz_port_set_apptrust(struct dsa_switch *ds, int port,
+ const u8 *sel, int nsel)
+{
+ const struct ksz_apptrust_map *map;
+ struct ksz_device *dev = ds->priv;
+ int reg, i, ret;
+ u8 data = 0;
+ u8 mask;
+
+ ret = ksz_port_set_apptrust_validate(dev, port, sel, nsel);
+ if (ret)
+ return ret;
+
+ ksz_get_apptrust_map_and_reg(dev, &map, &reg, &mask);
+
+ for (i = 0; i < nsel; i++) {
+ int j;
+
+ for (j = 0; j < ARRAY_SIZE(ksz_supported_apptrust); j++) {
+ if (sel[i] != ksz_supported_apptrust[j])
+ continue;
+
+ data |= map[j].bit;
+ break;
+ }
+ }
+
+ if (ksz_is_ksz88x3(dev)) {
+ ret = ksz88x3_port_apptrust_quirk(dev, port, reg, data);
+ if (ret)
+ return ret;
+ }
+
+ return ksz_prmw8(dev, port, reg, mask, data);
+}
+
+/**
+ * ksz_port_get_apptrust - Retrieves the apptrust selectors for a port on a KSZ
+ * switch
+ * @ds: Pointer to the DSA switch structure
+ * @port: Port number for which to get the apptrust selectors
+ * @sel: Array to store the apptrust selectors
+ * @nsel: Number of apptrust selectors in the array
+ *
+ * This function fetches the apptrust selectors for the specified port on a KSZ
+ * switch.
+ *
+ * Return: 0 on success, or a negative error code on failure
+ */
+int ksz_port_get_apptrust(struct dsa_switch *ds, int port, u8 *sel, int *nsel)
+{
+ const struct ksz_apptrust_map *map;
+ struct ksz_device *dev = ds->priv;
+ int reg, i, ret;
+ u8 data;
+ u8 mask;
+
+ ksz_get_apptrust_map_and_reg(dev, &map, &reg, &mask);
+
+ ret = ksz_pread8(dev, port, reg, &data);
+ if (ret)
+ return ret;
+
+ *nsel = 0;
+ for (i = 0; i < ARRAY_SIZE(ksz_supported_apptrust); i++) {
+ if (data & map[i].bit)
+ sel[(*nsel)++] = ksz_supported_apptrust[i];
+ }
+
+ return 0;
+}
+
+/**
+ * ksz_dcb_init_port - Initializes the DCB configuration for a port on a KSZ
+ * @dev: Pointer to the KSZ switch device structure
+ * @port: Port number for which to initialize the DCB configuration
+ *
+ * This function initializes the DCB configuration for the specified port on a
+ * KSZ switch. Particular DCB configuration is set for the port, including the
+ * default priority and apptrust selectors.
+ * The default priority is set to Best Effort, and the apptrust selectors are
+ * set to all supported selectors.
+ *
+ * Return: 0 on success, or a negative error code on failure
+ */
+int ksz_dcb_init_port(struct ksz_device *dev, int port)
+{
+ const u8 ksz_default_apptrust[] = { DCB_APP_SEL_PCP };
+ int ret, ipm;
+
+ if (is_ksz8(dev)) {
+ ipm = ieee8021q_tt_to_tc(IEEE8021Q_TT_BE,
+ dev->info->num_tx_queues);
+ if (ipm < 0)
+ return ipm;
+ } else {
+ ipm = IEEE8021Q_TT_BE;
+ }
+
+ /* Set the default priority for the port to Best Effort */
+ ret = ksz_port_set_default_prio(dev->ds, port, ipm);
+ if (ret)
+ return ret;
+
+ return ksz_port_set_apptrust(dev->ds, port, ksz_default_apptrust,
+ ARRAY_SIZE(ksz_default_apptrust));
+}
+
+/**
+ * ksz_dcb_init - Initializes the DCB configuration for a KSZ switch
+ * @dev: Pointer to the KSZ switch device structure
+ *
+ * This function initializes the DCB configuration for a KSZ switch. The global
+ * DSCP-to-priority mapping table is initialized.
+ *
+ * Return: 0 on success, or a negative error code on failure
+ */
+int ksz_dcb_init(struct ksz_device *dev)
+{
+ int ret;
+
+ ret = ksz_init_global_dscp_map(dev);
+ if (ret)
+ return ret;
+
+ /* Enable 802.1p priority control on Port 2 during switch initialization.
+ * This setup is critical for the apptrust functionality on Port 1, which
+ * relies on the priority settings of Port 2. Note: Port 1 is naturally
+ * configured before Port 2, necessitating this configuration order.
+ */
+ if (ksz_is_ksz88x3(dev))
+ return ksz_prmw8(dev, KSZ_PORT_2, KSZ8_REG_PORT_1_CTRL_0,
+ KSZ8_PORT_802_1P_ENABLE,
+ KSZ8_PORT_802_1P_ENABLE);
+
+ return 0;
+}
diff --git a/drivers/net/dsa/microchip/ksz_dcb.h b/drivers/net/dsa/microchip/ksz_dcb.h
new file mode 100644
index 0000000000..e2065223ba
--- /dev/null
+++ b/drivers/net/dsa/microchip/ksz_dcb.h
@@ -0,0 +1,23 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/* Copyright (c) 2024 Pengutronix, Oleksij Rempel <kernel@pengutronix.de> */
+
+#ifndef __KSZ_DCB_H
+#define __KSZ_DCB_H
+
+#include <net/dsa.h>
+
+#include "ksz_common.h"
+
+int ksz_port_get_default_prio(struct dsa_switch *ds, int port);
+int ksz_port_set_default_prio(struct dsa_switch *ds, int port, u8 prio);
+int ksz_port_get_dscp_prio(struct dsa_switch *ds, int port, u8 dscp);
+int ksz_port_add_dscp_prio(struct dsa_switch *ds, int port, u8 dscp, u8 prio);
+int ksz_port_del_dscp_prio(struct dsa_switch *ds, int port, u8 dscp, u8 prio);
+int ksz_port_set_apptrust(struct dsa_switch *ds, int port,
+ const unsigned char *sel,
+ int nsel);
+int ksz_port_get_apptrust(struct dsa_switch *ds, int port, u8 *sel, int *nsel);
+int ksz_dcb_init_port(struct ksz_device *dev, int port);
+int ksz_dcb_init(struct ksz_device *dev);
+
+#endif /* __KSZ_DCB_H */
diff --git a/drivers/net/dsa/microchip/ksz_spi.c b/drivers/net/dsa/microchip/ksz_spi.c
index c8166fb440..8e8d83213b 100644
--- a/drivers/net/dsa/microchip/ksz_spi.c
+++ b/drivers/net/dsa/microchip/ksz_spi.c
@@ -222,7 +222,6 @@ MODULE_DEVICE_TABLE(spi, ksz_spi_ids);
static struct spi_driver ksz_spi_driver = {
.driver = {
.name = "ksz-switch",
- .owner = THIS_MODULE,
.of_match_table = ksz_dt_ids,
},
.id_table = ksz_spi_ids,
@@ -233,13 +232,6 @@ static struct spi_driver ksz_spi_driver = {
module_spi_driver(ksz_spi_driver);
-MODULE_ALIAS("spi:ksz9477");
-MODULE_ALIAS("spi:ksz9896");
-MODULE_ALIAS("spi:ksz9897");
-MODULE_ALIAS("spi:ksz9893");
-MODULE_ALIAS("spi:ksz9563");
-MODULE_ALIAS("spi:ksz8563");
-MODULE_ALIAS("spi:ksz9567");
MODULE_ALIAS("spi:lan937x");
MODULE_AUTHOR("Tristram Ha <Tristram.Ha@microchip.com>");
MODULE_DESCRIPTION("Microchip ksz Series Switch SPI Driver");
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-09 07:05:45 +0000