summaryrefslogtreecommitdiffstats
path: root/drivers/net/dsa/mv88e6xxx/global1.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/dsa/mv88e6xxx/global1.c')
-rw-r--r--drivers/net/dsa/mv88e6xxx/global1.c89
1 files changed, 89 insertions, 0 deletions
diff --git a/drivers/net/dsa/mv88e6xxx/global1.c b/drivers/net/dsa/mv88e6xxx/global1.c
index 49444a72ff..9820cd5967 100644
--- a/drivers/net/dsa/mv88e6xxx/global1.c
+++ b/drivers/net/dsa/mv88e6xxx/global1.c
@@ -75,6 +75,95 @@ static int mv88e6xxx_g1_wait_init_ready(struct mv88e6xxx_chip *chip)
return mv88e6xxx_g1_wait_bit(chip, MV88E6XXX_G1_STS, bit, 1);
}
+static int mv88e6250_g1_eeprom_reload(struct mv88e6xxx_chip *chip)
+{
+ /* MV88E6185_G1_CTL1_RELOAD_EEPROM is also valid for 88E6250 */
+ int bit = __bf_shf(MV88E6185_G1_CTL1_RELOAD_EEPROM);
+ u16 val;
+ int err;
+
+ err = mv88e6xxx_g1_read(chip, MV88E6XXX_G1_CTL1, &val);
+ if (err)
+ return err;
+
+ val |= MV88E6185_G1_CTL1_RELOAD_EEPROM;
+
+ err = mv88e6xxx_g1_write(chip, MV88E6XXX_G1_CTL1, val);
+ if (err)
+ return err;
+
+ return mv88e6xxx_g1_wait_bit(chip, MV88E6XXX_G1_CTL1, bit, 0);
+}
+
+/* Returns 0 when done, -EBUSY when waiting, other negative codes on error */
+static int mv88e6xxx_g1_is_eeprom_done(struct mv88e6xxx_chip *chip)
+{
+ u16 val;
+ int err;
+
+ err = mv88e6xxx_g1_read(chip, MV88E6XXX_G1_STS, &val);
+ if (err < 0) {
+ dev_err(chip->dev, "Error reading status");
+ return err;
+ }
+
+ /* If the switch is still resetting, it may not
+ * respond on the bus, and so MDIO read returns
+ * 0xffff. Differentiate between that, and waiting for
+ * the EEPROM to be done by bit 0 being set.
+ */
+ if (val == 0xffff || !(val & BIT(MV88E6XXX_G1_STS_IRQ_EEPROM_DONE)))
+ return -EBUSY;
+
+ return 0;
+}
+
+/* As the EEInt (EEPROM done) flag clears on read if the status register, this
+ * function must be called directly after a hard reset or EEPROM ReLoad request,
+ * or the done condition may have been missed
+ */
+int mv88e6xxx_g1_wait_eeprom_done(struct mv88e6xxx_chip *chip)
+{
+ const unsigned long timeout = jiffies + 1 * HZ;
+ int ret;
+
+ /* Wait up to 1 second for the switch to finish reading the
+ * EEPROM.
+ */
+ while (time_before(jiffies, timeout)) {
+ ret = mv88e6xxx_g1_is_eeprom_done(chip);
+ if (ret != -EBUSY)
+ return ret;
+ }
+
+ dev_err(chip->dev, "Timeout waiting for EEPROM done");
+ return -ETIMEDOUT;
+}
+
+int mv88e6250_g1_wait_eeprom_done_prereset(struct mv88e6xxx_chip *chip)
+{
+ int ret;
+
+ ret = mv88e6xxx_g1_is_eeprom_done(chip);
+ if (ret != -EBUSY)
+ return ret;
+
+ /* Pre-reset, we don't know the state of the switch - when
+ * mv88e6xxx_g1_is_eeprom_done() returns -EBUSY, that may be because
+ * the switch is actually busy reading the EEPROM, or because
+ * MV88E6XXX_G1_STS_IRQ_EEPROM_DONE has been cleared by an unrelated
+ * status register read already.
+ *
+ * To account for the latter case, trigger another EEPROM reload for
+ * another chance at seeing the done flag.
+ */
+ ret = mv88e6250_g1_eeprom_reload(chip);
+ if (ret)
+ return ret;
+
+ return mv88e6xxx_g1_wait_eeprom_done(chip);
+}
+
/* Offset 0x01: Switch MAC Address Register Bytes 0 & 1
* Offset 0x02: Switch MAC Address Register Bytes 2 & 3
* Offset 0x03: Switch MAC Address Register Bytes 4 & 5