summaryrefslogtreecommitdiffstats
path: root/drivers/net/dsa/realtek/realtek-mdio.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/dsa/realtek/realtek-mdio.c')
-rw-r--r--drivers/net/dsa/realtek/realtek-mdio.c205
1 files changed, 51 insertions, 154 deletions
diff --git a/drivers/net/dsa/realtek/realtek-mdio.c b/drivers/net/dsa/realtek/realtek-mdio.c
index 292e6d087e..04b758e5a6 100644
--- a/drivers/net/dsa/realtek/realtek-mdio.c
+++ b/drivers/net/dsa/realtek/realtek-mdio.c
@@ -25,6 +25,8 @@
#include <linux/regmap.h>
#include "realtek.h"
+#include "realtek-mdio.h"
+#include "rtl83xx.h"
/* Read/write via mdiobus */
#define REALTEK_MDIO_CTRL0_REG 31
@@ -99,192 +101,87 @@ out_unlock:
return ret;
}
-static void realtek_mdio_lock(void *ctx)
-{
- struct realtek_priv *priv = ctx;
-
- mutex_lock(&priv->map_lock);
-}
-
-static void realtek_mdio_unlock(void *ctx)
-{
- struct realtek_priv *priv = ctx;
-
- mutex_unlock(&priv->map_lock);
-}
-
-static const struct regmap_config realtek_mdio_regmap_config = {
- .reg_bits = 10, /* A4..A0 R4..R0 */
- .val_bits = 16,
- .reg_stride = 1,
- /* PHY regs are at 0x8000 */
- .max_register = 0xffff,
- .reg_format_endian = REGMAP_ENDIAN_BIG,
+static const struct realtek_interface_info realtek_mdio_info = {
.reg_read = realtek_mdio_read,
.reg_write = realtek_mdio_write,
- .cache_type = REGCACHE_NONE,
- .lock = realtek_mdio_lock,
- .unlock = realtek_mdio_unlock,
};
-static const struct regmap_config realtek_mdio_nolock_regmap_config = {
- .reg_bits = 10, /* A4..A0 R4..R0 */
- .val_bits = 16,
- .reg_stride = 1,
- /* PHY regs are at 0x8000 */
- .max_register = 0xffff,
- .reg_format_endian = REGMAP_ENDIAN_BIG,
- .reg_read = realtek_mdio_read,
- .reg_write = realtek_mdio_write,
- .cache_type = REGCACHE_NONE,
- .disable_locking = true,
-};
-
-static int realtek_mdio_probe(struct mdio_device *mdiodev)
+/**
+ * realtek_mdio_probe() - Probe a platform device for an MDIO-connected switch
+ * @mdiodev: mdio_device to probe on.
+ *
+ * This function should be used as the .probe in an mdio_driver. After
+ * calling the common probe function for both interfaces, it initializes the
+ * values specific for MDIO-connected devices. Finally, it calls a common
+ * function to register the DSA switch.
+ *
+ * Context: Can sleep. Takes and releases priv->map_lock.
+ * Return: Returns 0 on success, a negative error on failure.
+ */
+int realtek_mdio_probe(struct mdio_device *mdiodev)
{
- struct realtek_priv *priv;
struct device *dev = &mdiodev->dev;
- const struct realtek_variant *var;
- struct regmap_config rc;
- struct device_node *np;
+ struct realtek_priv *priv;
int ret;
- var = of_device_get_match_data(dev);
- if (!var)
- return -EINVAL;
-
- priv = devm_kzalloc(&mdiodev->dev,
- size_add(sizeof(*priv), var->chip_data_sz),
- GFP_KERNEL);
- if (!priv)
- return -ENOMEM;
-
- mutex_init(&priv->map_lock);
+ priv = rtl83xx_probe(dev, &realtek_mdio_info);
+ if (IS_ERR(priv))
+ return PTR_ERR(priv);
- rc = realtek_mdio_regmap_config;
- rc.lock_arg = priv;
- priv->map = devm_regmap_init(dev, NULL, priv, &rc);
- if (IS_ERR(priv->map)) {
- ret = PTR_ERR(priv->map);
- dev_err(dev, "regmap init failed: %d\n", ret);
- return ret;
- }
-
- rc = realtek_mdio_nolock_regmap_config;
- priv->map_nolock = devm_regmap_init(dev, NULL, priv, &rc);
- if (IS_ERR(priv->map_nolock)) {
- ret = PTR_ERR(priv->map_nolock);
- dev_err(dev, "regmap init failed: %d\n", ret);
- return ret;
- }
-
- priv->mdio_addr = mdiodev->addr;
priv->bus = mdiodev->bus;
- priv->dev = &mdiodev->dev;
- priv->chip_data = (void *)priv + sizeof(*priv);
-
- priv->clk_delay = var->clk_delay;
- priv->cmd_read = var->cmd_read;
- priv->cmd_write = var->cmd_write;
- priv->ops = var->ops;
-
+ priv->mdio_addr = mdiodev->addr;
priv->write_reg_noack = realtek_mdio_write;
- np = dev->of_node;
-
- dev_set_drvdata(dev, priv);
-
- /* TODO: if power is software controlled, set up any regulators here */
- priv->leds_disabled = of_property_read_bool(np, "realtek,disable-leds");
-
- priv->reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW);
- if (IS_ERR(priv->reset)) {
- dev_err(dev, "failed to get RESET GPIO\n");
- return PTR_ERR(priv->reset);
- }
-
- if (priv->reset) {
- gpiod_set_value(priv->reset, 1);
- dev_dbg(dev, "asserted RESET\n");
- msleep(REALTEK_HW_STOP_DELAY);
- gpiod_set_value(priv->reset, 0);
- msleep(REALTEK_HW_START_DELAY);
- dev_dbg(dev, "deasserted RESET\n");
- }
-
- ret = priv->ops->detect(priv);
- if (ret) {
- dev_err(dev, "unable to detect switch\n");
- return ret;
- }
-
- priv->ds = devm_kzalloc(dev, sizeof(*priv->ds), GFP_KERNEL);
- if (!priv->ds)
- return -ENOMEM;
-
- priv->ds->dev = dev;
- priv->ds->num_ports = priv->num_ports;
- priv->ds->priv = priv;
- priv->ds->ops = var->ds_ops_mdio;
-
- ret = dsa_register_switch(priv->ds);
+ ret = rtl83xx_register_switch(priv);
if (ret) {
- dev_err(priv->dev, "unable to register switch ret = %d\n", ret);
+ rtl83xx_remove(priv);
return ret;
}
return 0;
}
+EXPORT_SYMBOL_NS_GPL(realtek_mdio_probe, REALTEK_DSA);
-static void realtek_mdio_remove(struct mdio_device *mdiodev)
+/**
+ * realtek_mdio_remove() - Remove the driver of an MDIO-connected switch
+ * @mdiodev: mdio_device to be removed.
+ *
+ * This function should be used as the .remove_new in an mdio_driver. First
+ * it unregisters the DSA switch and then it calls the common remove function.
+ *
+ * Context: Can sleep.
+ * Return: Nothing.
+ */
+void realtek_mdio_remove(struct mdio_device *mdiodev)
{
struct realtek_priv *priv = dev_get_drvdata(&mdiodev->dev);
if (!priv)
return;
- dsa_unregister_switch(priv->ds);
+ rtl83xx_unregister_switch(priv);
- /* leave the device reset asserted */
- if (priv->reset)
- gpiod_set_value(priv->reset, 1);
+ rtl83xx_remove(priv);
}
+EXPORT_SYMBOL_NS_GPL(realtek_mdio_remove, REALTEK_DSA);
-static void realtek_mdio_shutdown(struct mdio_device *mdiodev)
+/**
+ * realtek_mdio_shutdown() - Shutdown the driver of a MDIO-connected switch
+ * @mdiodev: mdio_device shutting down.
+ *
+ * This function should be used as the .shutdown in a platform_driver. It calls
+ * the common shutdown function.
+ *
+ * Context: Can sleep.
+ * Return: Nothing.
+ */
+void realtek_mdio_shutdown(struct mdio_device *mdiodev)
{
struct realtek_priv *priv = dev_get_drvdata(&mdiodev->dev);
if (!priv)
return;
- dsa_switch_shutdown(priv->ds);
-
- dev_set_drvdata(&mdiodev->dev, NULL);
+ rtl83xx_shutdown(priv);
}
-
-static const struct of_device_id realtek_mdio_of_match[] = {
-#if IS_ENABLED(CONFIG_NET_DSA_REALTEK_RTL8366RB)
- { .compatible = "realtek,rtl8366rb", .data = &rtl8366rb_variant, },
-#endif
-#if IS_ENABLED(CONFIG_NET_DSA_REALTEK_RTL8365MB)
- { .compatible = "realtek,rtl8365mb", .data = &rtl8365mb_variant, },
-#endif
- { /* sentinel */ },
-};
-MODULE_DEVICE_TABLE(of, realtek_mdio_of_match);
-
-static struct mdio_driver realtek_mdio_driver = {
- .mdiodrv.driver = {
- .name = "realtek-mdio",
- .of_match_table = realtek_mdio_of_match,
- },
- .probe = realtek_mdio_probe,
- .remove = realtek_mdio_remove,
- .shutdown = realtek_mdio_shutdown,
-};
-
-mdio_module_driver(realtek_mdio_driver);
-
-MODULE_AUTHOR("Luiz Angelo Daros de Luca <luizluca@gmail.com>");
-MODULE_DESCRIPTION("Driver for Realtek ethernet switch connected via MDIO interface");
-MODULE_LICENSE("GPL");
+EXPORT_SYMBOL_NS_GPL(realtek_mdio_shutdown, REALTEK_DSA);
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-05 16:02:53 +0000