diff options
Diffstat (limited to 'drivers/net/dsa/realtek/realtek-mdio.c')
| -rw-r--r-- | drivers/net/dsa/realtek/realtek-mdio.c | 205 |
1 files changed, 51 insertions, 154 deletions
diff --git a/drivers/net/dsa/realtek/realtek-mdio.c b/drivers/net/dsa/realtek/realtek-mdio.c index 292e6d087..04b758e5a 100644 --- a/drivers/net/dsa/realtek/realtek-mdio.c +++ b/drivers/net/dsa/realtek/realtek-mdio.c @@ -25,6 +25,8 @@ #include <linux/regmap.h> #include "realtek.h" +#include "realtek-mdio.h" +#include "rtl83xx.h" /* Read/write via mdiobus */ #define REALTEK_MDIO_CTRL0_REG 31 @@ -99,192 +101,87 @@ out_unlock: return ret; } -static void realtek_mdio_lock(void *ctx) -{ - struct realtek_priv *priv = ctx; - - mutex_lock(&priv->map_lock); -} - -static void realtek_mdio_unlock(void *ctx) -{ - struct realtek_priv *priv = ctx; - - mutex_unlock(&priv->map_lock); -} - -static const struct regmap_config realtek_mdio_regmap_config = { - .reg_bits = 10, /* A4..A0 R4..R0 */ - .val_bits = 16, - .reg_stride = 1, - /* PHY regs are at 0x8000 */ - .max_register = 0xffff, - .reg_format_endian = REGMAP_ENDIAN_BIG, +static const struct realtek_interface_info realtek_mdio_info = { .reg_read = realtek_mdio_read, .reg_write = realtek_mdio_write, - .cache_type = REGCACHE_NONE, - .lock = realtek_mdio_lock, - .unlock = realtek_mdio_unlock, }; -static const struct regmap_config realtek_mdio_nolock_regmap_config = { - .reg_bits = 10, /* A4..A0 R4..R0 */ - .val_bits = 16, - .reg_stride = 1, - /* PHY regs are at 0x8000 */ - .max_register = 0xffff, - .reg_format_endian = REGMAP_ENDIAN_BIG, - .reg_read = realtek_mdio_read, - .reg_write = realtek_mdio_write, - .cache_type = REGCACHE_NONE, - .disable_locking = true, -}; - -static int realtek_mdio_probe(struct mdio_device *mdiodev) +/** + * realtek_mdio_probe() - Probe a platform device for an MDIO-connected switch + * @mdiodev: mdio_device to probe on. + * + * This function should be used as the .probe in an mdio_driver. After + * calling the common probe function for both interfaces, it initializes the + * values specific for MDIO-connected devices. Finally, it calls a common + * function to register the DSA switch. + * + * Context: Can sleep. Takes and releases priv->map_lock. + * Return: Returns 0 on success, a negative error on failure. + */ +int realtek_mdio_probe(struct mdio_device *mdiodev) { - struct realtek_priv *priv; struct device *dev = &mdiodev->dev; - const struct realtek_variant *var; - struct regmap_config rc; - struct device_node *np; + struct realtek_priv *priv; int ret; - var = of_device_get_match_data(dev); - if (!var) - return -EINVAL; - - priv = devm_kzalloc(&mdiodev->dev, - size_add(sizeof(*priv), var->chip_data_sz), - GFP_KERNEL); - if (!priv) - return -ENOMEM; - - mutex_init(&priv->map_lock); + priv = rtl83xx_probe(dev, &realtek_mdio_info); + if (IS_ERR(priv)) + return PTR_ERR(priv); - rc = realtek_mdio_regmap_config; - rc.lock_arg = priv; - priv->map = devm_regmap_init(dev, NULL, priv, &rc); - if (IS_ERR(priv->map)) { - ret = PTR_ERR(priv->map); - dev_err(dev, "regmap init failed: %d\n", ret); - return ret; - } - - rc = realtek_mdio_nolock_regmap_config; - priv->map_nolock = devm_regmap_init(dev, NULL, priv, &rc); - if (IS_ERR(priv->map_nolock)) { - ret = PTR_ERR(priv->map_nolock); - dev_err(dev, "regmap init failed: %d\n", ret); - return ret; - } - - priv->mdio_addr = mdiodev->addr; priv->bus = mdiodev->bus; - priv->dev = &mdiodev->dev; - priv->chip_data = (void *)priv + sizeof(*priv); - - priv->clk_delay = var->clk_delay; - priv->cmd_read = var->cmd_read; - priv->cmd_write = var->cmd_write; - priv->ops = var->ops; - + priv->mdio_addr = mdiodev->addr; priv->write_reg_noack = realtek_mdio_write; - np = dev->of_node; - - dev_set_drvdata(dev, priv); - - /* TODO: if power is software controlled, set up any regulators here */ - priv->leds_disabled = of_property_read_bool(np, "realtek,disable-leds"); - - priv->reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW); - if (IS_ERR(priv->reset)) { - dev_err(dev, "failed to get RESET GPIO\n"); - return PTR_ERR(priv->reset); - } - - if (priv->reset) { - gpiod_set_value(priv->reset, 1); - dev_dbg(dev, "asserted RESET\n"); - msleep(REALTEK_HW_STOP_DELAY); - gpiod_set_value(priv->reset, 0); - msleep(REALTEK_HW_START_DELAY); - dev_dbg(dev, "deasserted RESET\n"); - } - - ret = priv->ops->detect(priv); - if (ret) { - dev_err(dev, "unable to detect switch\n"); - return ret; - } - - priv->ds = devm_kzalloc(dev, sizeof(*priv->ds), GFP_KERNEL); - if (!priv->ds) - return -ENOMEM; - - priv->ds->dev = dev; - priv->ds->num_ports = priv->num_ports; - priv->ds->priv = priv; - priv->ds->ops = var->ds_ops_mdio; - - ret = dsa_register_switch(priv->ds); + ret = rtl83xx_register_switch(priv); if (ret) { - dev_err(priv->dev, "unable to register switch ret = %d\n", ret); + rtl83xx_remove(priv); return ret; } return 0; } +EXPORT_SYMBOL_NS_GPL(realtek_mdio_probe, REALTEK_DSA); -static void realtek_mdio_remove(struct mdio_device *mdiodev) +/** + * realtek_mdio_remove() - Remove the driver of an MDIO-connected switch + * @mdiodev: mdio_device to be removed. + * + * This function should be used as the .remove_new in an mdio_driver. First + * it unregisters the DSA switch and then it calls the common remove function. + * + * Context: Can sleep. + * Return: Nothing. + */ +void realtek_mdio_remove(struct mdio_device *mdiodev) { struct realtek_priv *priv = dev_get_drvdata(&mdiodev->dev); if (!priv) return; - dsa_unregister_switch(priv->ds); + rtl83xx_unregister_switch(priv); - /* leave the device reset asserted */ - if (priv->reset) - gpiod_set_value(priv->reset, 1); + rtl83xx_remove(priv); } +EXPORT_SYMBOL_NS_GPL(realtek_mdio_remove, REALTEK_DSA); -static void realtek_mdio_shutdown(struct mdio_device *mdiodev) +/** + * realtek_mdio_shutdown() - Shutdown the driver of a MDIO-connected switch + * @mdiodev: mdio_device shutting down. + * + * This function should be used as the .shutdown in a platform_driver. It calls + * the common shutdown function. + * + * Context: Can sleep. + * Return: Nothing. + */ +void realtek_mdio_shutdown(struct mdio_device *mdiodev) { struct realtek_priv *priv = dev_get_drvdata(&mdiodev->dev); if (!priv) return; - dsa_switch_shutdown(priv->ds); - - dev_set_drvdata(&mdiodev->dev, NULL); + rtl83xx_shutdown(priv); } - -static const struct of_device_id realtek_mdio_of_match[] = { -#if IS_ENABLED(CONFIG_NET_DSA_REALTEK_RTL8366RB) - { .compatible = "realtek,rtl8366rb", .data = &rtl8366rb_variant, }, -#endif -#if IS_ENABLED(CONFIG_NET_DSA_REALTEK_RTL8365MB) - { .compatible = "realtek,rtl8365mb", .data = &rtl8365mb_variant, }, -#endif - { /* sentinel */ }, -}; -MODULE_DEVICE_TABLE(of, realtek_mdio_of_match); - -static struct mdio_driver realtek_mdio_driver = { - .mdiodrv.driver = { - .name = "realtek-mdio", - .of_match_table = realtek_mdio_of_match, - }, - .probe = realtek_mdio_probe, - .remove = realtek_mdio_remove, - .shutdown = realtek_mdio_shutdown, -}; - -mdio_module_driver(realtek_mdio_driver); - -MODULE_AUTHOR("Luiz Angelo Daros de Luca <luizluca@gmail.com>"); -MODULE_DESCRIPTION("Driver for Realtek ethernet switch connected via MDIO interface"); -MODULE_LICENSE("GPL"); +EXPORT_SYMBOL_NS_GPL(realtek_mdio_shutdown, REALTEK_DSA); |