summaryrefslogtreecommitdiffstats
path: root/drivers/net/dsa/realtek/rtl8366rb.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/dsa/realtek/rtl8366rb.c')
-rw-r--r--drivers/net/dsa/realtek/rtl8366rb.c333
1 files changed, 287 insertions, 46 deletions
diff --git a/drivers/net/dsa/realtek/rtl8366rb.c b/drivers/net/dsa/realtek/rtl8366rb.c
index 5ccb1a3a14..9e821b42e5 100644
--- a/drivers/net/dsa/realtek/rtl8366rb.c
+++ b/drivers/net/dsa/realtek/rtl8366rb.c
@@ -176,6 +176,7 @@
#define RTL8366RB_VLAN_INGRESS_CTRL2_REG 0x037f
/* LED control registers */
+/* The LED blink rate is global; it is used by all triggers in all groups. */
#define RTL8366RB_LED_BLINKRATE_REG 0x0430
#define RTL8366RB_LED_BLINKRATE_MASK 0x0007
#define RTL8366RB_LED_BLINKRATE_28MS 0x0000
@@ -191,31 +192,21 @@
(4 * (led_group))
#define RTL8366RB_LED_CTRL_MASK(led_group) \
(0xf << RTL8366RB_LED_CTRL_OFFSET(led_group))
-#define RTL8366RB_LED_OFF 0x0
-#define RTL8366RB_LED_DUP_COL 0x1
-#define RTL8366RB_LED_LINK_ACT 0x2
-#define RTL8366RB_LED_SPD1000 0x3
-#define RTL8366RB_LED_SPD100 0x4
-#define RTL8366RB_LED_SPD10 0x5
-#define RTL8366RB_LED_SPD1000_ACT 0x6
-#define RTL8366RB_LED_SPD100_ACT 0x7
-#define RTL8366RB_LED_SPD10_ACT 0x8
-#define RTL8366RB_LED_SPD100_10_ACT 0x9
-#define RTL8366RB_LED_FIBER 0xa
-#define RTL8366RB_LED_AN_FAULT 0xb
-#define RTL8366RB_LED_LINK_RX 0xc
-#define RTL8366RB_LED_LINK_TX 0xd
-#define RTL8366RB_LED_MASTER 0xe
-#define RTL8366RB_LED_FORCE 0xf
/* The RTL8366RB_LED_X_X registers are used to manually set the LED state only
* when the corresponding LED group in RTL8366RB_LED_CTRL_REG is
- * RTL8366RB_LED_FORCE. Otherwise, it is ignored.
+ * RTL8366RB_LEDGROUP_FORCE. Otherwise, it is ignored.
*/
#define RTL8366RB_LED_0_1_CTRL_REG 0x0432
-#define RTL8366RB_LED_1_OFFSET 6
#define RTL8366RB_LED_2_3_CTRL_REG 0x0433
-#define RTL8366RB_LED_3_OFFSET 6
+#define RTL8366RB_LED_X_X_CTRL_REG(led_group) \
+ ((led_group) <= 1 ? \
+ RTL8366RB_LED_0_1_CTRL_REG : \
+ RTL8366RB_LED_2_3_CTRL_REG)
+#define RTL8366RB_LED_0_X_CTRL_MASK GENMASK(5, 0)
+#define RTL8366RB_LED_X_1_CTRL_MASK GENMASK(11, 6)
+#define RTL8366RB_LED_2_X_CTRL_MASK GENMASK(5, 0)
+#define RTL8366RB_LED_X_3_CTRL_MASK GENMASK(11, 6)
#define RTL8366RB_MIB_COUNT 33
#define RTL8366RB_GLOBAL_MIB_COUNT 1
@@ -359,14 +350,44 @@
#define RTL8366RB_GREEN_FEATURE_TX BIT(0)
#define RTL8366RB_GREEN_FEATURE_RX BIT(2)
+enum rtl8366_ledgroup_mode {
+ RTL8366RB_LEDGROUP_OFF = 0x0,
+ RTL8366RB_LEDGROUP_DUP_COL = 0x1,
+ RTL8366RB_LEDGROUP_LINK_ACT = 0x2,
+ RTL8366RB_LEDGROUP_SPD1000 = 0x3,
+ RTL8366RB_LEDGROUP_SPD100 = 0x4,
+ RTL8366RB_LEDGROUP_SPD10 = 0x5,
+ RTL8366RB_LEDGROUP_SPD1000_ACT = 0x6,
+ RTL8366RB_LEDGROUP_SPD100_ACT = 0x7,
+ RTL8366RB_LEDGROUP_SPD10_ACT = 0x8,
+ RTL8366RB_LEDGROUP_SPD100_10_ACT = 0x9,
+ RTL8366RB_LEDGROUP_FIBER = 0xa,
+ RTL8366RB_LEDGROUP_AN_FAULT = 0xb,
+ RTL8366RB_LEDGROUP_LINK_RX = 0xc,
+ RTL8366RB_LEDGROUP_LINK_TX = 0xd,
+ RTL8366RB_LEDGROUP_MASTER = 0xe,
+ RTL8366RB_LEDGROUP_FORCE = 0xf,
+
+ __RTL8366RB_LEDGROUP_MODE_MAX
+};
+
+struct rtl8366rb_led {
+ u8 port_num;
+ u8 led_group;
+ struct realtek_priv *priv;
+ struct led_classdev cdev;
+};
+
/**
* struct rtl8366rb - RTL8366RB-specific data
* @max_mtu: per-port max MTU setting
* @pvid_enabled: if PVID is set for respective port
+ * @leds: per-port and per-ledgroup led info
*/
struct rtl8366rb {
unsigned int max_mtu[RTL8366RB_NUM_PORTS];
bool pvid_enabled[RTL8366RB_NUM_PORTS];
+ struct rtl8366rb_led leds[RTL8366RB_NUM_PORTS][RTL8366RB_NUM_LEDGROUPS];
};
static struct rtl8366_mib_counter rtl8366rb_mib_counters[] = {
@@ -809,6 +830,217 @@ static int rtl8366rb_jam_table(const struct rtl8366rb_jam_tbl_entry *jam_table,
return 0;
}
+static int rb8366rb_set_ledgroup_mode(struct realtek_priv *priv,
+ u8 led_group,
+ enum rtl8366_ledgroup_mode mode)
+{
+ int ret;
+ u32 val;
+
+ val = mode << RTL8366RB_LED_CTRL_OFFSET(led_group);
+
+ ret = regmap_update_bits(priv->map,
+ RTL8366RB_LED_CTRL_REG,
+ RTL8366RB_LED_CTRL_MASK(led_group),
+ val);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+static inline u32 rtl8366rb_led_group_port_mask(u8 led_group, u8 port)
+{
+ switch (led_group) {
+ case 0:
+ return FIELD_PREP(RTL8366RB_LED_0_X_CTRL_MASK, BIT(port));
+ case 1:
+ return FIELD_PREP(RTL8366RB_LED_0_X_CTRL_MASK, BIT(port));
+ case 2:
+ return FIELD_PREP(RTL8366RB_LED_0_X_CTRL_MASK, BIT(port));
+ case 3:
+ return FIELD_PREP(RTL8366RB_LED_0_X_CTRL_MASK, BIT(port));
+ default:
+ return 0;
+ }
+}
+
+static int rb8366rb_get_port_led(struct rtl8366rb_led *led)
+{
+ struct realtek_priv *priv = led->priv;
+ u8 led_group = led->led_group;
+ u8 port_num = led->port_num;
+ int ret;
+ u32 val;
+
+ ret = regmap_read(priv->map, RTL8366RB_LED_X_X_CTRL_REG(led_group),
+ &val);
+ if (ret) {
+ dev_err(priv->dev, "error reading LED on port %d group %d\n",
+ led_group, port_num);
+ return ret;
+ }
+
+ return !!(val & rtl8366rb_led_group_port_mask(led_group, port_num));
+}
+
+static int rb8366rb_set_port_led(struct rtl8366rb_led *led, bool enable)
+{
+ struct realtek_priv *priv = led->priv;
+ u8 led_group = led->led_group;
+ u8 port_num = led->port_num;
+ int ret;
+
+ ret = regmap_update_bits(priv->map,
+ RTL8366RB_LED_X_X_CTRL_REG(led_group),
+ rtl8366rb_led_group_port_mask(led_group,
+ port_num),
+ enable ? 0xffff : 0);
+ if (ret) {
+ dev_err(priv->dev, "error updating LED on port %d group %d\n",
+ led_group, port_num);
+ return ret;
+ }
+
+ /* Change the LED group to manual controlled LEDs if required */
+ ret = rb8366rb_set_ledgroup_mode(priv, led_group,
+ RTL8366RB_LEDGROUP_FORCE);
+
+ if (ret) {
+ dev_err(priv->dev, "error updating LED GROUP group %d\n",
+ led_group);
+ return ret;
+ }
+
+ return 0;
+}
+
+static int
+rtl8366rb_cled_brightness_set_blocking(struct led_classdev *ldev,
+ enum led_brightness brightness)
+{
+ struct rtl8366rb_led *led = container_of(ldev, struct rtl8366rb_led,
+ cdev);
+
+ return rb8366rb_set_port_led(led, brightness == LED_ON);
+}
+
+static int rtl8366rb_setup_led(struct realtek_priv *priv, struct dsa_port *dp,
+ struct fwnode_handle *led_fwnode)
+{
+ struct rtl8366rb *rb = priv->chip_data;
+ struct led_init_data init_data = { };
+ enum led_default_state state;
+ struct rtl8366rb_led *led;
+ u32 led_group;
+ int ret;
+
+ ret = fwnode_property_read_u32(led_fwnode, "reg", &led_group);
+ if (ret)
+ return ret;
+
+ if (led_group >= RTL8366RB_NUM_LEDGROUPS) {
+ dev_warn(priv->dev, "Invalid LED reg %d defined for port %d",
+ led_group, dp->index);
+ return -EINVAL;
+ }
+
+ led = &rb->leds[dp->index][led_group];
+ led->port_num = dp->index;
+ led->led_group = led_group;
+ led->priv = priv;
+
+ state = led_init_default_state_get(led_fwnode);
+ switch (state) {
+ case LEDS_DEFSTATE_ON:
+ led->cdev.brightness = 1;
+ rb8366rb_set_port_led(led, 1);
+ break;
+ case LEDS_DEFSTATE_KEEP:
+ led->cdev.brightness =
+ rb8366rb_get_port_led(led);
+ break;
+ case LEDS_DEFSTATE_OFF:
+ default:
+ led->cdev.brightness = 0;
+ rb8366rb_set_port_led(led, 0);
+ }
+
+ led->cdev.max_brightness = 1;
+ led->cdev.brightness_set_blocking =
+ rtl8366rb_cled_brightness_set_blocking;
+ init_data.fwnode = led_fwnode;
+ init_data.devname_mandatory = true;
+
+ init_data.devicename = kasprintf(GFP_KERNEL, "Realtek-%d:0%d:%d",
+ dp->ds->index, dp->index, led_group);
+ if (!init_data.devicename)
+ return -ENOMEM;
+
+ ret = devm_led_classdev_register_ext(priv->dev, &led->cdev, &init_data);
+ if (ret) {
+ dev_warn(priv->dev, "Failed to init LED %d for port %d",
+ led_group, dp->index);
+ return ret;
+ }
+
+ return 0;
+}
+
+static int rtl8366rb_setup_all_leds_off(struct realtek_priv *priv)
+{
+ int ret = 0;
+ int i;
+
+ regmap_update_bits(priv->map,
+ RTL8366RB_INTERRUPT_CONTROL_REG,
+ RTL8366RB_P4_RGMII_LED,
+ 0);
+
+ for (i = 0; i < RTL8366RB_NUM_LEDGROUPS; i++) {
+ ret = rb8366rb_set_ledgroup_mode(priv, i,
+ RTL8366RB_LEDGROUP_OFF);
+ if (ret)
+ return ret;
+ }
+
+ return ret;
+}
+
+static int rtl8366rb_setup_leds(struct realtek_priv *priv)
+{
+ struct device_node *leds_np, *led_np;
+ struct dsa_switch *ds = &priv->ds;
+ struct dsa_port *dp;
+ int ret = 0;
+
+ dsa_switch_for_each_port(dp, ds) {
+ if (!dp->dn)
+ continue;
+
+ leds_np = of_get_child_by_name(dp->dn, "leds");
+ if (!leds_np) {
+ dev_dbg(priv->dev, "No leds defined for port %d",
+ dp->index);
+ continue;
+ }
+
+ for_each_child_of_node(leds_np, led_np) {
+ ret = rtl8366rb_setup_led(priv, dp,
+ of_fwnode_handle(led_np));
+ if (ret) {
+ of_node_put(led_np);
+ break;
+ }
+ }
+
+ of_node_put(leds_np);
+ if (ret)
+ return ret;
+ }
+ return 0;
+}
+
static int rtl8366rb_setup(struct dsa_switch *ds)
{
struct realtek_priv *priv = ds->priv;
@@ -817,7 +1049,6 @@ static int rtl8366rb_setup(struct dsa_switch *ds)
u32 chip_ver = 0;
u32 chip_id = 0;
int jam_size;
- u32 val;
int ret;
int i;
@@ -997,7 +1228,9 @@ static int rtl8366rb_setup(struct dsa_switch *ds)
if (ret)
return ret;
- /* Set blinking, TODO: make this configurable */
+ /* Set blinking, used by all LED groups using HW triggers.
+ * TODO: make this configurable
+ */
ret = regmap_update_bits(priv->map, RTL8366RB_LED_BLINKRATE_REG,
RTL8366RB_LED_BLINKRATE_MASK,
RTL8366RB_LED_BLINKRATE_56MS);
@@ -1005,26 +1238,19 @@ static int rtl8366rb_setup(struct dsa_switch *ds)
return ret;
/* Set up LED activity:
- * Each port has 4 LEDs, we configure all ports to the same
- * behaviour (no individual config) but we can set up each
- * LED separately.
+ * Each port has 4 LEDs on fixed groups. Each group shares the same
+ * hardware trigger across all ports. LEDs can only be indiviually
+ * controlled setting the LED group to fixed mode and using the driver
+ * to toggle them LEDs on/off.
*/
if (priv->leds_disabled) {
- /* Turn everything off */
- regmap_update_bits(priv->map,
- RTL8366RB_INTERRUPT_CONTROL_REG,
- RTL8366RB_P4_RGMII_LED,
- 0);
-
- for (i = 0; i < RTL8366RB_NUM_LEDGROUPS; i++) {
- val = RTL8366RB_LED_OFF << RTL8366RB_LED_CTRL_OFFSET(i);
- ret = regmap_update_bits(priv->map,
- RTL8366RB_LED_CTRL_REG,
- RTL8366RB_LED_CTRL_MASK(i),
- val);
- if (ret)
- return ret;
- }
+ ret = rtl8366rb_setup_all_leds_off(priv);
+ if (ret)
+ return ret;
+ } else {
+ ret = rtl8366rb_setup_leds(priv);
+ if (ret)
+ return ret;
}
ret = rtl8366_reset_vlan(priv);
@@ -1079,11 +1305,19 @@ static void rtl8366rb_phylink_get_caps(struct dsa_switch *ds, int port,
}
static void
-rtl8366rb_mac_link_up(struct dsa_switch *ds, int port, unsigned int mode,
- phy_interface_t interface, struct phy_device *phydev,
+rtl8366rb_mac_config(struct phylink_config *config, unsigned int mode,
+ const struct phylink_link_state *state)
+{
+}
+
+static void
+rtl8366rb_mac_link_up(struct phylink_config *config, struct phy_device *phydev,
+ unsigned int mode, phy_interface_t interface,
int speed, int duplex, bool tx_pause, bool rx_pause)
{
- struct realtek_priv *priv = ds->priv;
+ struct dsa_port *dp = dsa_phylink_to_port(config);
+ struct realtek_priv *priv = dp->ds->priv;
+ int port = dp->index;
unsigned int val;
int ret;
@@ -1149,10 +1383,12 @@ rtl8366rb_mac_link_up(struct dsa_switch *ds, int port, unsigned int mode,
}
static void
-rtl8366rb_mac_link_down(struct dsa_switch *ds, int port, unsigned int mode,
+rtl8366rb_mac_link_down(struct phylink_config *config, unsigned int mode,
phy_interface_t interface)
{
- struct realtek_priv *priv = ds->priv;
+ struct dsa_port *dp = dsa_phylink_to_port(config);
+ struct realtek_priv *priv = dp->ds->priv;
+ int port = dp->index;
int ret;
if (port != priv->cpu_port)
@@ -1802,12 +2038,16 @@ static int rtl8366rb_detect(struct realtek_priv *priv)
return 0;
}
+static const struct phylink_mac_ops rtl8366rb_phylink_mac_ops = {
+ .mac_config = rtl8366rb_mac_config,
+ .mac_link_down = rtl8366rb_mac_link_down,
+ .mac_link_up = rtl8366rb_mac_link_up,
+};
+
static const struct dsa_switch_ops rtl8366rb_switch_ops = {
.get_tag_protocol = rtl8366_get_tag_protocol,
.setup = rtl8366rb_setup,
.phylink_get_caps = rtl8366rb_phylink_get_caps,
- .phylink_mac_link_up = rtl8366rb_mac_link_up,
- .phylink_mac_link_down = rtl8366rb_mac_link_down,
.get_strings = rtl8366_get_strings,
.get_ethtool_stats = rtl8366_get_ethtool_stats,
.get_sset_count = rtl8366_get_sset_count,
@@ -1845,6 +2085,7 @@ static const struct realtek_ops rtl8366rb_ops = {
const struct realtek_variant rtl8366rb_variant = {
.ds_ops = &rtl8366rb_switch_ops,
.ops = &rtl8366rb_ops,
+ .phylink_mac_ops = &rtl8366rb_phylink_mac_ops,
.clk_delay = 10,
.cmd_read = 0xa9,
.cmd_write = 0xa8,