diff options
Diffstat (limited to 'drivers/net/dsa/realtek')
-rw-r--r-- | drivers/net/dsa/realtek/rtl8366rb.c | 87 | ||||
-rw-r--r-- | drivers/net/dsa/realtek/rtl83xx.c | 7 |
2 files changed, 22 insertions, 72 deletions
diff --git a/drivers/net/dsa/realtek/rtl8366rb.c b/drivers/net/dsa/realtek/rtl8366rb.c index e10ae94cf7..5ccb1a3a14 100644 --- a/drivers/net/dsa/realtek/rtl8366rb.c +++ b/drivers/net/dsa/realtek/rtl8366rb.c @@ -185,7 +185,12 @@ #define RTL8366RB_LED_BLINKRATE_222MS 0x0004 #define RTL8366RB_LED_BLINKRATE_446MS 0x0005 +/* LED trigger event for each group */ #define RTL8366RB_LED_CTRL_REG 0x0431 +#define RTL8366RB_LED_CTRL_OFFSET(led_group) \ + (4 * (led_group)) +#define RTL8366RB_LED_CTRL_MASK(led_group) \ + (0xf << RTL8366RB_LED_CTRL_OFFSET(led_group)) #define RTL8366RB_LED_OFF 0x0 #define RTL8366RB_LED_DUP_COL 0x1 #define RTL8366RB_LED_LINK_ACT 0x2 @@ -202,6 +207,11 @@ #define RTL8366RB_LED_LINK_TX 0xd #define RTL8366RB_LED_MASTER 0xe #define RTL8366RB_LED_FORCE 0xf + +/* The RTL8366RB_LED_X_X registers are used to manually set the LED state only + * when the corresponding LED group in RTL8366RB_LED_CTRL_REG is + * RTL8366RB_LED_FORCE. Otherwise, it is ignored. + */ #define RTL8366RB_LED_0_1_CTRL_REG 0x0432 #define RTL8366RB_LED_1_OFFSET 6 #define RTL8366RB_LED_2_3_CTRL_REG 0x0433 @@ -1002,27 +1012,19 @@ static int rtl8366rb_setup(struct dsa_switch *ds) if (priv->leds_disabled) { /* Turn everything off */ regmap_update_bits(priv->map, - RTL8366RB_LED_0_1_CTRL_REG, - 0x0FFF, 0); - regmap_update_bits(priv->map, - RTL8366RB_LED_2_3_CTRL_REG, - 0x0FFF, 0); - regmap_update_bits(priv->map, RTL8366RB_INTERRUPT_CONTROL_REG, RTL8366RB_P4_RGMII_LED, 0); - val = RTL8366RB_LED_OFF; - } else { - /* TODO: make this configurable per LED */ - val = RTL8366RB_LED_FORCE; - } - for (i = 0; i < 4; i++) { - ret = regmap_update_bits(priv->map, - RTL8366RB_LED_CTRL_REG, - 0xf << (i * 4), - val << (i * 4)); - if (ret) - return ret; + + for (i = 0; i < RTL8366RB_NUM_LEDGROUPS; i++) { + val = RTL8366RB_LED_OFF << RTL8366RB_LED_CTRL_OFFSET(i); + ret = regmap_update_bits(priv->map, + RTL8366RB_LED_CTRL_REG, + RTL8366RB_LED_CTRL_MASK(i), + val); + if (ret) + return ret; + } } ret = rtl8366_reset_vlan(priv); @@ -1167,52 +1169,6 @@ rtl8366rb_mac_link_down(struct dsa_switch *ds, int port, unsigned int mode, } } -static void rb8366rb_set_port_led(struct realtek_priv *priv, - int port, bool enable) -{ - u16 val = enable ? 0x3f : 0; - int ret; - - if (priv->leds_disabled) - return; - - switch (port) { - case 0: - ret = regmap_update_bits(priv->map, - RTL8366RB_LED_0_1_CTRL_REG, - 0x3F, val); - break; - case 1: - ret = regmap_update_bits(priv->map, - RTL8366RB_LED_0_1_CTRL_REG, - 0x3F << RTL8366RB_LED_1_OFFSET, - val << RTL8366RB_LED_1_OFFSET); - break; - case 2: - ret = regmap_update_bits(priv->map, - RTL8366RB_LED_2_3_CTRL_REG, - 0x3F, val); - break; - case 3: - ret = regmap_update_bits(priv->map, - RTL8366RB_LED_2_3_CTRL_REG, - 0x3F << RTL8366RB_LED_3_OFFSET, - val << RTL8366RB_LED_3_OFFSET); - break; - case 4: - ret = regmap_update_bits(priv->map, - RTL8366RB_INTERRUPT_CONTROL_REG, - RTL8366RB_P4_RGMII_LED, - enable ? RTL8366RB_P4_RGMII_LED : 0); - break; - default: - dev_err(priv->dev, "no LED for port %d\n", port); - return; - } - if (ret) - dev_err(priv->dev, "error updating LED on port %d\n", port); -} - static int rtl8366rb_port_enable(struct dsa_switch *ds, int port, struct phy_device *phy) @@ -1226,7 +1182,6 @@ rtl8366rb_port_enable(struct dsa_switch *ds, int port, if (ret) return ret; - rb8366rb_set_port_led(priv, port, true); return 0; } @@ -1241,8 +1196,6 @@ rtl8366rb_port_disable(struct dsa_switch *ds, int port) BIT(port)); if (ret) return; - - rb8366rb_set_port_led(priv, port, false); } static int diff --git a/drivers/net/dsa/realtek/rtl83xx.c b/drivers/net/dsa/realtek/rtl83xx.c index d2e8768053..a9c1702431 100644 --- a/drivers/net/dsa/realtek/rtl83xx.c +++ b/drivers/net/dsa/realtek/rtl83xx.c @@ -290,16 +290,13 @@ EXPORT_SYMBOL_NS_GPL(rtl83xx_shutdown, REALTEK_DSA); * rtl83xx_remove() - Cleanup a realtek switch driver * @priv: realtek_priv pointer * - * If a method is provided, this function asserts the hard reset of the switch - * in order to avoid leaking traffic when the driver is gone. + * Placehold for common cleanup procedures. * - * Context: Might sleep if priv->gdev->chip->can_sleep. + * Context: Any * Return: nothing */ void rtl83xx_remove(struct realtek_priv *priv) { - /* leave the device reset asserted */ - rtl83xx_reset_assert(priv); } EXPORT_SYMBOL_NS_GPL(rtl83xx_remove, REALTEK_DSA); |