summaryrefslogtreecommitdiffstats
path: root/drivers/net/dsa
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/dsa')
-rw-r--r--drivers/net/dsa/b53/b53_common.c4
-rw-r--r--drivers/net/dsa/b53/b53_mdio.c2
-rw-r--r--drivers/net/dsa/b53/b53_mmap.c6
-rw-r--r--drivers/net/dsa/b53/b53_srab.c8
-rw-r--r--drivers/net/dsa/bcm_sf2.c49
-rw-r--r--drivers/net/dsa/bcm_sf2.h2
-rw-r--r--drivers/net/dsa/bcm_sf2_cfp.c4
-rw-r--r--drivers/net/dsa/dsa_loop.c9
-rw-r--r--drivers/net/dsa/hirschmann/hellcreek.c8
-rw-r--r--drivers/net/dsa/lan9303-core.c4
-rw-r--r--drivers/net/dsa/lantiq_gswip.c45
-rw-r--r--drivers/net/dsa/microchip/Makefile2
-rw-r--r--drivers/net/dsa/microchip/ksz8795.c86
-rw-r--r--drivers/net/dsa/microchip/ksz8795_reg.h21
-rw-r--r--drivers/net/dsa/microchip/ksz9477.c274
-rw-r--r--drivers/net/dsa/microchip/ksz9477.h43
-rw-r--r--drivers/net/dsa/microchip/ksz9477_acl.c1436
-rw-r--r--drivers/net/dsa/microchip/ksz9477_i2c.c5
-rw-r--r--drivers/net/dsa/microchip/ksz9477_reg.h20
-rw-r--r--drivers/net/dsa/microchip/ksz9477_tc_flower.c281
-rw-r--r--drivers/net/dsa/microchip/ksz_common.c645
-rw-r--r--drivers/net/dsa/microchip/ksz_common.h42
-rw-r--r--drivers/net/dsa/microchip/ksz_ptp.c2
-rw-r--r--drivers/net/dsa/microchip/ksz_spi.c5
-rw-r--r--drivers/net/dsa/mt7530-mmio.c7
-rw-r--r--drivers/net/dsa/mt7530.c35
-rw-r--r--drivers/net/dsa/mv88e6xxx/chip.c6
-rw-r--r--drivers/net/dsa/mv88e6xxx/chip.h4
-rw-r--r--drivers/net/dsa/mv88e6xxx/pcs-639x.c2
-rw-r--r--drivers/net/dsa/mv88e6xxx/ptp.c4
-rw-r--r--drivers/net/dsa/mv88e6xxx/serdes.c10
-rw-r--r--drivers/net/dsa/mv88e6xxx/serdes.h8
-rw-r--r--drivers/net/dsa/ocelot/felix.c68
-rw-r--r--drivers/net/dsa/ocelot/felix.h6
-rw-r--r--drivers/net/dsa/ocelot/ocelot_ext.c8
-rw-r--r--drivers/net/dsa/ocelot/seville_vsc9953.c8
-rw-r--r--drivers/net/dsa/qca/qca8k-8xxx.c74
-rw-r--r--drivers/net/dsa/qca/qca8k-common.c7
-rw-r--r--drivers/net/dsa/qca/qca8k-leds.c6
-rw-r--r--drivers/net/dsa/qca/qca8k.h2
-rw-r--r--drivers/net/dsa/realtek/realtek-smi.c36
-rw-r--r--drivers/net/dsa/realtek/realtek.h2
-rw-r--r--drivers/net/dsa/realtek/rtl8365mb.c5
-rw-r--r--drivers/net/dsa/realtek/rtl8366-core.c8
-rw-r--r--drivers/net/dsa/realtek/rtl8366rb.c44
-rw-r--r--drivers/net/dsa/rzn1_a5psw.c8
-rw-r--r--drivers/net/dsa/sja1105/sja1105_clocking.c21
-rw-r--r--drivers/net/dsa/sja1105/sja1105_main.c4
-rw-r--r--drivers/net/dsa/vitesse-vsc73xx-core.c49
-rw-r--r--drivers/net/dsa/vitesse-vsc73xx-platform.c8
-rw-r--r--drivers/net/dsa/xrs700x/xrs700x.c30
51 files changed, 3119 insertions, 354 deletions
diff --git a/drivers/net/dsa/b53/b53_common.c b/drivers/net/dsa/b53/b53_common.c
index 4e27dc913c..0d628b35fd 100644
--- a/drivers/net/dsa/b53/b53_common.c
+++ b/drivers/net/dsa/b53/b53_common.c
@@ -757,7 +757,7 @@ int b53_configure_vlan(struct dsa_switch *ds)
/* Create an untagged VLAN entry for the default PVID in case
* CONFIG_VLAN_8021Q is disabled and there are no calls to
- * dsa_slave_vlan_rx_add_vid() to create the default VLAN
+ * dsa_user_vlan_rx_add_vid() to create the default VLAN
* entry. Do this only when the tagging protocol is not
* DSA_TAG_PROTO_NONE
*/
@@ -958,7 +958,7 @@ static struct phy_device *b53_get_phy_device(struct dsa_switch *ds, int port)
return NULL;
}
- return mdiobus_get_phy(ds->slave_mii_bus, port);
+ return mdiobus_get_phy(ds->user_mii_bus, port);
}
void b53_get_strings(struct dsa_switch *ds, int port, u32 stringset,
diff --git a/drivers/net/dsa/b53/b53_mdio.c b/drivers/net/dsa/b53/b53_mdio.c
index 4d55d8d183..897e5e8b3d 100644
--- a/drivers/net/dsa/b53/b53_mdio.c
+++ b/drivers/net/dsa/b53/b53_mdio.c
@@ -329,7 +329,7 @@ static int b53_mdio_probe(struct mdio_device *mdiodev)
* layer setup
*/
if (of_machine_is_compatible("brcm,bcm7445d0") &&
- strcmp(mdiodev->bus->name, "sf2 slave mii"))
+ strcmp(mdiodev->bus->name, "sf2 user mii"))
return -EPROBE_DEFER;
dev = b53_switch_alloc(&mdiodev->dev, &b53_mdio_ops, mdiodev->bus);
diff --git a/drivers/net/dsa/b53/b53_mmap.c b/drivers/net/dsa/b53/b53_mmap.c
index 5e39641ea8..3a89349dc9 100644
--- a/drivers/net/dsa/b53/b53_mmap.c
+++ b/drivers/net/dsa/b53/b53_mmap.c
@@ -324,14 +324,12 @@ static int b53_mmap_probe(struct platform_device *pdev)
return b53_switch_register(dev);
}
-static int b53_mmap_remove(struct platform_device *pdev)
+static void b53_mmap_remove(struct platform_device *pdev)
{
struct b53_device *dev = platform_get_drvdata(pdev);
if (dev)
b53_switch_remove(dev);
-
- return 0;
}
static void b53_mmap_shutdown(struct platform_device *pdev)
@@ -372,7 +370,7 @@ MODULE_DEVICE_TABLE(of, b53_mmap_of_table);
static struct platform_driver b53_mmap_driver = {
.probe = b53_mmap_probe,
- .remove = b53_mmap_remove,
+ .remove_new = b53_mmap_remove,
.shutdown = b53_mmap_shutdown,
.driver = {
.name = "b53-switch",
diff --git a/drivers/net/dsa/b53/b53_srab.c b/drivers/net/dsa/b53/b53_srab.c
index bcb4403440..f3f95332ff 100644
--- a/drivers/net/dsa/b53/b53_srab.c
+++ b/drivers/net/dsa/b53/b53_srab.c
@@ -657,17 +657,15 @@ static int b53_srab_probe(struct platform_device *pdev)
return b53_switch_register(dev);
}
-static int b53_srab_remove(struct platform_device *pdev)
+static void b53_srab_remove(struct platform_device *pdev)
{
struct b53_device *dev = platform_get_drvdata(pdev);
if (!dev)
- return 0;
+ return;
b53_srab_intr_set(dev->priv, false);
b53_switch_remove(dev);
-
- return 0;
}
static void b53_srab_shutdown(struct platform_device *pdev)
@@ -684,7 +682,7 @@ static void b53_srab_shutdown(struct platform_device *pdev)
static struct platform_driver b53_srab_driver = {
.probe = b53_srab_probe,
- .remove = b53_srab_remove,
+ .remove_new = b53_srab_remove,
.shutdown = b53_srab_shutdown,
.driver = {
.name = "b53-srab-switch",
diff --git a/drivers/net/dsa/bcm_sf2.c b/drivers/net/dsa/bcm_sf2.c
index cd1f240c90..cadee5505c 100644
--- a/drivers/net/dsa/bcm_sf2.c
+++ b/drivers/net/dsa/bcm_sf2.c
@@ -623,19 +623,19 @@ static int bcm_sf2_mdio_register(struct dsa_switch *ds)
priv->master_mii_dn = dn;
- priv->slave_mii_bus = mdiobus_alloc();
- if (!priv->slave_mii_bus) {
+ priv->user_mii_bus = mdiobus_alloc();
+ if (!priv->user_mii_bus) {
err = -ENOMEM;
goto err_put_master_mii_bus_dev;
}
- priv->slave_mii_bus->priv = priv;
- priv->slave_mii_bus->name = "sf2 slave mii";
- priv->slave_mii_bus->read = bcm_sf2_sw_mdio_read;
- priv->slave_mii_bus->write = bcm_sf2_sw_mdio_write;
- snprintf(priv->slave_mii_bus->id, MII_BUS_ID_SIZE, "sf2-%d",
+ priv->user_mii_bus->priv = priv;
+ priv->user_mii_bus->name = "sf2 user mii";
+ priv->user_mii_bus->read = bcm_sf2_sw_mdio_read;
+ priv->user_mii_bus->write = bcm_sf2_sw_mdio_write;
+ snprintf(priv->user_mii_bus->id, MII_BUS_ID_SIZE, "sf2-%d",
index++);
- priv->slave_mii_bus->dev.of_node = dn;
+ priv->user_mii_bus->dev.of_node = dn;
/* Include the pseudo-PHY address to divert reads towards our
* workaround. This is only required for 7445D0, since 7445E0
@@ -653,9 +653,9 @@ static int bcm_sf2_mdio_register(struct dsa_switch *ds)
priv->indir_phy_mask = 0;
ds->phys_mii_mask = priv->indir_phy_mask;
- ds->slave_mii_bus = priv->slave_mii_bus;
- priv->slave_mii_bus->parent = ds->dev->parent;
- priv->slave_mii_bus->phy_mask = ~priv->indir_phy_mask;
+ ds->user_mii_bus = priv->user_mii_bus;
+ priv->user_mii_bus->parent = ds->dev->parent;
+ priv->user_mii_bus->phy_mask = ~priv->indir_phy_mask;
/* We need to make sure that of_phy_connect() will not work by
* removing the 'phandle' and 'linux,phandle' properties and
@@ -682,14 +682,14 @@ static int bcm_sf2_mdio_register(struct dsa_switch *ds)
phy_device_remove(phydev);
}
- err = mdiobus_register(priv->slave_mii_bus);
+ err = mdiobus_register(priv->user_mii_bus);
if (err && dn)
- goto err_free_slave_mii_bus;
+ goto err_free_user_mii_bus;
return 0;
-err_free_slave_mii_bus:
- mdiobus_free(priv->slave_mii_bus);
+err_free_user_mii_bus:
+ mdiobus_free(priv->user_mii_bus);
err_put_master_mii_bus_dev:
put_device(&priv->master_mii_bus->dev);
err_of_node_put:
@@ -699,10 +699,9 @@ err_of_node_put:
static void bcm_sf2_mdio_unregister(struct bcm_sf2_priv *priv)
{
- mdiobus_unregister(priv->slave_mii_bus);
- mdiobus_free(priv->slave_mii_bus);
+ mdiobus_unregister(priv->user_mii_bus);
+ mdiobus_free(priv->user_mii_bus);
put_device(&priv->master_mii_bus->dev);
- of_node_put(priv->master_mii_dn);
}
static u32 bcm_sf2_sw_get_phy_flags(struct dsa_switch *ds, int port)
@@ -915,7 +914,7 @@ static void bcm_sf2_sw_fixed_state(struct dsa_switch *ds, int port,
* state machine and make it go in PHY_FORCING state instead.
*/
if (!status->link)
- netif_carrier_off(dsa_to_port(ds, port)->slave);
+ netif_carrier_off(dsa_to_port(ds, port)->user);
status->duplex = DUPLEX_FULL;
} else {
status->link = true;
@@ -989,7 +988,7 @@ static int bcm_sf2_sw_resume(struct dsa_switch *ds)
static void bcm_sf2_sw_get_wol(struct dsa_switch *ds, int port,
struct ethtool_wolinfo *wol)
{
- struct net_device *p = dsa_port_to_master(dsa_to_port(ds, port));
+ struct net_device *p = dsa_port_to_conduit(dsa_to_port(ds, port));
struct bcm_sf2_priv *priv = bcm_sf2_to_priv(ds);
struct ethtool_wolinfo pwol = { };
@@ -1013,7 +1012,7 @@ static void bcm_sf2_sw_get_wol(struct dsa_switch *ds, int port,
static int bcm_sf2_sw_set_wol(struct dsa_switch *ds, int port,
struct ethtool_wolinfo *wol)
{
- struct net_device *p = dsa_port_to_master(dsa_to_port(ds, port));
+ struct net_device *p = dsa_port_to_conduit(dsa_to_port(ds, port));
struct bcm_sf2_priv *priv = bcm_sf2_to_priv(ds);
s8 cpu_port = dsa_to_port(ds, port)->cpu_dp->index;
struct ethtool_wolinfo pwol = { };
@@ -1543,12 +1542,12 @@ out_clk:
return ret;
}
-static int bcm_sf2_sw_remove(struct platform_device *pdev)
+static void bcm_sf2_sw_remove(struct platform_device *pdev)
{
struct bcm_sf2_priv *priv = platform_get_drvdata(pdev);
if (!priv)
- return 0;
+ return;
priv->wol_ports_mask = 0;
/* Disable interrupts */
@@ -1560,8 +1559,6 @@ static int bcm_sf2_sw_remove(struct platform_device *pdev)
clk_disable_unprepare(priv->clk);
if (priv->type == BCM7278_DEVICE_ID)
reset_control_assert(priv->rcdev);
-
- return 0;
}
static void bcm_sf2_sw_shutdown(struct platform_device *pdev)
@@ -1607,7 +1604,7 @@ static SIMPLE_DEV_PM_OPS(bcm_sf2_pm_ops,
static struct platform_driver bcm_sf2_driver = {
.probe = bcm_sf2_sw_probe,
- .remove = bcm_sf2_sw_remove,
+ .remove_new = bcm_sf2_sw_remove,
.shutdown = bcm_sf2_sw_shutdown,
.driver = {
.name = "brcm-sf2",
diff --git a/drivers/net/dsa/bcm_sf2.h b/drivers/net/dsa/bcm_sf2.h
index 00afc94ce5..424f896b5a 100644
--- a/drivers/net/dsa/bcm_sf2.h
+++ b/drivers/net/dsa/bcm_sf2.h
@@ -108,7 +108,7 @@ struct bcm_sf2_priv {
/* Master and slave MDIO bus controller */
unsigned int indir_phy_mask;
struct device_node *master_mii_dn;
- struct mii_bus *slave_mii_bus;
+ struct mii_bus *user_mii_bus;
struct mii_bus *master_mii_bus;
/* Bitmask of ports needing BRCM tags */
diff --git a/drivers/net/dsa/bcm_sf2_cfp.c b/drivers/net/dsa/bcm_sf2_cfp.c
index c4010b7bf0..c88ee3dd42 100644
--- a/drivers/net/dsa/bcm_sf2_cfp.c
+++ b/drivers/net/dsa/bcm_sf2_cfp.c
@@ -1102,7 +1102,7 @@ static int bcm_sf2_cfp_rule_get_all(struct bcm_sf2_priv *priv,
int bcm_sf2_get_rxnfc(struct dsa_switch *ds, int port,
struct ethtool_rxnfc *nfc, u32 *rule_locs)
{
- struct net_device *p = dsa_port_to_master(dsa_to_port(ds, port));
+ struct net_device *p = dsa_port_to_conduit(dsa_to_port(ds, port));
struct bcm_sf2_priv *priv = bcm_sf2_to_priv(ds);
int ret = 0;
@@ -1145,7 +1145,7 @@ int bcm_sf2_get_rxnfc(struct dsa_switch *ds, int port,
int bcm_sf2_set_rxnfc(struct dsa_switch *ds, int port,
struct ethtool_rxnfc *nfc)
{
- struct net_device *p = dsa_port_to_master(dsa_to_port(ds, port));
+ struct net_device *p = dsa_port_to_conduit(dsa_to_port(ds, port));
struct bcm_sf2_priv *priv = bcm_sf2_to_priv(ds);
int ret = 0;
diff --git a/drivers/net/dsa/dsa_loop.c b/drivers/net/dsa/dsa_loop.c
index 5b139f2206..c70ed67cc1 100644
--- a/drivers/net/dsa/dsa_loop.c
+++ b/drivers/net/dsa/dsa_loop.c
@@ -277,6 +277,14 @@ static int dsa_loop_port_max_mtu(struct dsa_switch *ds, int port)
return ETH_MAX_MTU;
}
+static void dsa_loop_phylink_get_caps(struct dsa_switch *dsa, int port,
+ struct phylink_config *config)
+{
+ bitmap_fill(config->supported_interfaces, PHY_INTERFACE_MODE_MAX);
+ __clear_bit(PHY_INTERFACE_MODE_NA, config->supported_interfaces);
+ config->mac_capabilities = ~0;
+}
+
static const struct dsa_switch_ops dsa_loop_driver = {
.get_tag_protocol = dsa_loop_get_protocol,
.setup = dsa_loop_setup,
@@ -295,6 +303,7 @@ static const struct dsa_switch_ops dsa_loop_driver = {
.port_vlan_del = dsa_loop_port_vlan_del,
.port_change_mtu = dsa_loop_port_change_mtu,
.port_max_mtu = dsa_loop_port_max_mtu,
+ .phylink_get_caps = dsa_loop_phylink_get_caps,
};
static int dsa_loop_drv_probe(struct mdio_device *mdiodev)
diff --git a/drivers/net/dsa/hirschmann/hellcreek.c b/drivers/net/dsa/hirschmann/hellcreek.c
index 11ef1d7ea2..beda1e9d35 100644
--- a/drivers/net/dsa/hirschmann/hellcreek.c
+++ b/drivers/net/dsa/hirschmann/hellcreek.c
@@ -2060,18 +2060,16 @@ err_ptp_setup:
return ret;
}
-static int hellcreek_remove(struct platform_device *pdev)
+static void hellcreek_remove(struct platform_device *pdev)
{
struct hellcreek *hellcreek = platform_get_drvdata(pdev);
if (!hellcreek)
- return 0;
+ return;
hellcreek_hwtstamp_free(hellcreek);
hellcreek_ptp_free(hellcreek);
dsa_unregister_switch(hellcreek->ds);
-
- return 0;
}
static void hellcreek_shutdown(struct platform_device *pdev)
@@ -2107,7 +2105,7 @@ MODULE_DEVICE_TABLE(of, hellcreek_of_match);
static struct platform_driver hellcreek_driver = {
.probe = hellcreek_probe,
- .remove = hellcreek_remove,
+ .remove_new = hellcreek_remove,
.shutdown = hellcreek_shutdown,
.driver = {
.name = "hellcreek",
diff --git a/drivers/net/dsa/lan9303-core.c b/drivers/net/dsa/lan9303-core.c
index ee67adeb2c..fcb20eac33 100644
--- a/drivers/net/dsa/lan9303-core.c
+++ b/drivers/net/dsa/lan9303-core.c
@@ -1084,7 +1084,7 @@ static int lan9303_port_enable(struct dsa_switch *ds, int port,
if (!dsa_port_is_user(dp))
return 0;
- vlan_vid_add(dsa_port_to_master(dp), htons(ETH_P_8021Q), port);
+ vlan_vid_add(dsa_port_to_conduit(dp), htons(ETH_P_8021Q), port);
return lan9303_enable_processing_port(chip, port);
}
@@ -1097,7 +1097,7 @@ static void lan9303_port_disable(struct dsa_switch *ds, int port)
if (!dsa_port_is_user(dp))
return;
- vlan_vid_del(dsa_port_to_master(dp), htons(ETH_P_8021Q), port);
+ vlan_vid_del(dsa_port_to_conduit(dp), htons(ETH_P_8021Q), port);
lan9303_disable_processing_port(chip, port);
lan9303_phy_write(ds, chip->phy_addr_base + port, MII_BMCR, BMCR_PDOWN);
diff --git a/drivers/net/dsa/lantiq_gswip.c b/drivers/net/dsa/lantiq_gswip.c
index 3c76a1a14a..9c185c9f09 100644
--- a/drivers/net/dsa/lantiq_gswip.c
+++ b/drivers/net/dsa/lantiq_gswip.c
@@ -510,22 +510,22 @@ static int gswip_mdio(struct gswip_priv *priv, struct device_node *mdio_np)
struct dsa_switch *ds = priv->ds;
int err;
- ds->slave_mii_bus = mdiobus_alloc();
- if (!ds->slave_mii_bus)
+ ds->user_mii_bus = mdiobus_alloc();
+ if (!ds->user_mii_bus)
return -ENOMEM;
- ds->slave_mii_bus->priv = priv;
- ds->slave_mii_bus->read = gswip_mdio_rd;
- ds->slave_mii_bus->write = gswip_mdio_wr;
- ds->slave_mii_bus->name = "lantiq,xrx200-mdio";
- snprintf(ds->slave_mii_bus->id, MII_BUS_ID_SIZE, "%s-mii",
+ ds->user_mii_bus->priv = priv;
+ ds->user_mii_bus->read = gswip_mdio_rd;
+ ds->user_mii_bus->write = gswip_mdio_wr;
+ ds->user_mii_bus->name = "lantiq,xrx200-mdio";
+ snprintf(ds->user_mii_bus->id, MII_BUS_ID_SIZE, "%s-mii",
dev_name(priv->dev));
- ds->slave_mii_bus->parent = priv->dev;
- ds->slave_mii_bus->phy_mask = ~ds->phys_mii_mask;
+ ds->user_mii_bus->parent = priv->dev;
+ ds->user_mii_bus->phy_mask = ~ds->phys_mii_mask;
- err = of_mdiobus_register(ds->slave_mii_bus, mdio_np);
+ err = of_mdiobus_register(ds->user_mii_bus, mdio_np);
if (err)
- mdiobus_free(ds->slave_mii_bus);
+ mdiobus_free(ds->user_mii_bus);
return err;
}
@@ -1759,8 +1759,7 @@ static void gswip_get_strings(struct dsa_switch *ds, int port, u32 stringset,
return;
for (i = 0; i < ARRAY_SIZE(gswip_rmon_cnt); i++)
- strncpy(data + i * ETH_GSTRING_LEN, gswip_rmon_cnt[i].name,
- ETH_GSTRING_LEN);
+ ethtool_sprintf(&data, "%s", gswip_rmon_cnt[i].name);
}
static u32 gswip_bcm_ram_entry_read(struct gswip_priv *priv, u32 table,
@@ -2197,8 +2196,8 @@ disable_switch:
dsa_unregister_switch(priv->ds);
mdio_bus:
if (mdio_np) {
- mdiobus_unregister(priv->ds->slave_mii_bus);
- mdiobus_free(priv->ds->slave_mii_bus);
+ mdiobus_unregister(priv->ds->user_mii_bus);
+ mdiobus_free(priv->ds->user_mii_bus);
}
put_mdio_node:
of_node_put(mdio_np);
@@ -2207,29 +2206,27 @@ put_mdio_node:
return err;
}
-static int gswip_remove(struct platform_device *pdev)
+static void gswip_remove(struct platform_device *pdev)
{
struct gswip_priv *priv = platform_get_drvdata(pdev);
int i;
if (!priv)
- return 0;
+ return;
/* disable the switch */
gswip_mdio_mask(priv, GSWIP_MDIO_GLOB_ENABLE, 0, GSWIP_MDIO_GLOB);
dsa_unregister_switch(priv->ds);
- if (priv->ds->slave_mii_bus) {
- mdiobus_unregister(priv->ds->slave_mii_bus);
- of_node_put(priv->ds->slave_mii_bus->dev.of_node);
- mdiobus_free(priv->ds->slave_mii_bus);
+ if (priv->ds->user_mii_bus) {
+ mdiobus_unregister(priv->ds->user_mii_bus);
+ of_node_put(priv->ds->user_mii_bus->dev.of_node);
+ mdiobus_free(priv->ds->user_mii_bus);
}
for (i = 0; i < priv->num_gphy_fw; i++)
gswip_gphy_fw_remove(priv, &priv->gphy_fw[i]);
-
- return 0;
}
static void gswip_shutdown(struct platform_device *pdev)
@@ -2266,7 +2263,7 @@ MODULE_DEVICE_TABLE(of, gswip_of_match);
static struct platform_driver gswip_driver = {
.probe = gswip_probe,
- .remove = gswip_remove,
+ .remove_new = gswip_remove,
.shutdown = gswip_shutdown,
.driver = {
.name = "gswip",
diff --git a/drivers/net/dsa/microchip/Makefile b/drivers/net/dsa/microchip/Makefile
index 48360cc9fc..49459a50db 100644
--- a/drivers/net/dsa/microchip/Makefile
+++ b/drivers/net/dsa/microchip/Makefile
@@ -1,7 +1,7 @@
# SPDX-License-Identifier: GPL-2.0-only
obj-$(CONFIG_NET_DSA_MICROCHIP_KSZ_COMMON) += ksz_switch.o
ksz_switch-objs := ksz_common.o
-ksz_switch-objs += ksz9477.o
+ksz_switch-objs += ksz9477.o ksz9477_acl.o ksz9477_tc_flower.o
ksz_switch-objs += ksz8795.o
ksz_switch-objs += lan937x_main.o
diff --git a/drivers/net/dsa/microchip/ksz8795.c b/drivers/net/dsa/microchip/ksz8795.c
index 91aba470fb..4bf4d67557 100644
--- a/drivers/net/dsa/microchip/ksz8795.c
+++ b/drivers/net/dsa/microchip/ksz8795.c
@@ -632,6 +632,50 @@ static void ksz8_w_vlan_table(struct ksz_device *dev, u16 vid, u16 vlan)
ksz8_w_table(dev, TABLE_VLAN, addr, buf);
}
+/**
+ * ksz8_r_phy_ctrl - Translates and reads from the SMI interface to a MIIM PHY
+ * Control register (Reg. 31).
+ * @dev: The KSZ device instance.
+ * @port: The port number to be read.
+ * @val: The value read from the SMI interface.
+ *
+ * This function reads the SMI interface and translates the hardware register
+ * bit values into their corresponding control settings for a MIIM PHY Control
+ * register.
+ *
+ * Return: 0 on success, error code on failure.
+ */
+static int ksz8_r_phy_ctrl(struct ksz_device *dev, int port, u16 *val)
+{
+ const u16 *regs = dev->info->regs;
+ u8 reg_val;
+ int ret;
+
+ *val = 0;
+
+ ret = ksz_pread8(dev, port, regs[P_LINK_STATUS], &reg_val);
+ if (ret < 0)
+ return ret;
+
+ if (reg_val & PORT_MDIX_STATUS)
+ *val |= KSZ886X_CTRL_MDIX_STAT;
+
+ ret = ksz_pread8(dev, port, REG_PORT_LINK_MD_CTRL, &reg_val);
+ if (ret < 0)
+ return ret;
+
+ if (reg_val & PORT_FORCE_LINK)
+ *val |= KSZ886X_CTRL_FORCE_LINK;
+
+ if (reg_val & PORT_POWER_SAVING)
+ *val |= KSZ886X_CTRL_PWRSAVE;
+
+ if (reg_val & PORT_PHY_REMOTE_LOOPBACK)
+ *val |= KSZ886X_CTRL_REMOTE_LOOPBACK;
+
+ return 0;
+}
+
int ksz8_r_phy(struct ksz_device *dev, u16 phy, u16 reg, u16 *val)
{
u8 restart, speed, ctrl, link;
@@ -769,12 +813,10 @@ int ksz8_r_phy(struct ksz_device *dev, u16 phy, u16 reg, u16 *val)
FIELD_GET(PORT_CABLE_FAULT_COUNTER_L, val2));
break;
case PHY_REG_PHY_CTRL:
- ret = ksz_pread8(dev, p, regs[P_LINK_STATUS], &link);
+ ret = ksz8_r_phy_ctrl(dev, p, &data);
if (ret)
return ret;
- if (link & PORT_MDIX_STATUS)
- data |= KSZ886X_CTRL_MDIX_STAT;
break;
default:
processed = false;
@@ -786,6 +828,38 @@ int ksz8_r_phy(struct ksz_device *dev, u16 phy, u16 reg, u16 *val)
return 0;
}
+/**
+ * ksz8_w_phy_ctrl - Translates and writes to the SMI interface from a MIIM PHY
+ * Control register (Reg. 31).
+ * @dev: The KSZ device instance.
+ * @port: The port number to be configured.
+ * @val: The register value to be written.
+ *
+ * This function translates control settings from a MIIM PHY Control register
+ * into their corresponding hardware register bit values for the SMI
+ * interface.
+ *
+ * Return: 0 on success, error code on failure.
+ */
+static int ksz8_w_phy_ctrl(struct ksz_device *dev, int port, u16 val)
+{
+ u8 reg_val = 0;
+ int ret;
+
+ if (val & KSZ886X_CTRL_FORCE_LINK)
+ reg_val |= PORT_FORCE_LINK;
+
+ if (val & KSZ886X_CTRL_PWRSAVE)
+ reg_val |= PORT_POWER_SAVING;
+
+ if (val & KSZ886X_CTRL_REMOTE_LOOPBACK)
+ reg_val |= PORT_PHY_REMOTE_LOOPBACK;
+
+ ret = ksz_prmw8(dev, port, REG_PORT_LINK_MD_CTRL, PORT_FORCE_LINK |
+ PORT_POWER_SAVING | PORT_PHY_REMOTE_LOOPBACK, reg_val);
+ return ret;
+}
+
int ksz8_w_phy(struct ksz_device *dev, u16 phy, u16 reg, u16 val)
{
u8 restart, speed, ctrl, data;
@@ -926,6 +1000,12 @@ int ksz8_w_phy(struct ksz_device *dev, u16 phy, u16 reg, u16 val)
if (val & PHY_START_CABLE_DIAG)
ksz_port_cfg(dev, p, REG_PORT_LINK_MD_CTRL, PORT_START_CABLE_DIAG, true);
break;
+
+ case PHY_REG_PHY_CTRL:
+ ret = ksz8_w_phy_ctrl(dev, p, val);
+ if (ret)
+ return ret;
+ break;
default:
break;
}
diff --git a/drivers/net/dsa/microchip/ksz8795_reg.h b/drivers/net/dsa/microchip/ksz8795_reg.h
index 7a57c6088f..3c9dae53e4 100644
--- a/drivers/net/dsa/microchip/ksz8795_reg.h
+++ b/drivers/net/dsa/microchip/ksz8795_reg.h
@@ -323,13 +323,6 @@
((addr) + REG_PORT_1_CTRL_0 + (port) * \
(REG_PORT_2_CTRL_0 - REG_PORT_1_CTRL_0))
-#define REG_SW_MAC_ADDR_0 0x68
-#define REG_SW_MAC_ADDR_1 0x69
-#define REG_SW_MAC_ADDR_2 0x6A
-#define REG_SW_MAC_ADDR_3 0x6B
-#define REG_SW_MAC_ADDR_4 0x6C
-#define REG_SW_MAC_ADDR_5 0x6D
-
#define TABLE_EXT_SELECT_S 5
#define TABLE_EEE_V 1
#define TABLE_ACL_V 2
@@ -442,20 +435,6 @@
#define TOS_PRIO_M KS_PRIO_M
#define TOS_PRIO_S KS_PRIO_S
-#define REG_SW_CTRL_20 0xA3
-
-#define SW_GMII_DRIVE_STRENGTH_S 4
-#define SW_DRIVE_STRENGTH_M 0x7
-#define SW_DRIVE_STRENGTH_2MA 0
-#define SW_DRIVE_STRENGTH_4MA 1
-#define SW_DRIVE_STRENGTH_8MA 2
-#define SW_DRIVE_STRENGTH_12MA 3
-#define SW_DRIVE_STRENGTH_16MA 4
-#define SW_DRIVE_STRENGTH_20MA 5
-#define SW_DRIVE_STRENGTH_24MA 6
-#define SW_DRIVE_STRENGTH_28MA 7
-#define SW_MII_DRIVE_STRENGTH_S 0
-
#define REG_SW_CTRL_21 0xA4
#define SW_IPV6_MLD_OPTION BIT(3)
diff --git a/drivers/net/dsa/microchip/ksz9477.c b/drivers/net/dsa/microchip/ksz9477.c
index 83b7f2d5c1..7f745628c8 100644
--- a/drivers/net/dsa/microchip/ksz9477.c
+++ b/drivers/net/dsa/microchip/ksz9477.c
@@ -56,6 +56,187 @@ int ksz9477_change_mtu(struct ksz_device *dev, int port, int mtu)
REG_SW_MTU_MASK, frame_size);
}
+/**
+ * ksz9477_handle_wake_reason - Handle wake reason on a specified port.
+ * @dev: The device structure.
+ * @port: The port number.
+ *
+ * This function reads the PME (Power Management Event) status register of a
+ * specified port to determine the wake reason. If there is no wake event, it
+ * returns early. Otherwise, it logs the wake reason which could be due to a
+ * "Magic Packet", "Link Up", or "Energy Detect" event. The PME status register
+ * is then cleared to acknowledge the handling of the wake event.
+ *
+ * Return: 0 on success, or an error code on failure.
+ */
+static int ksz9477_handle_wake_reason(struct ksz_device *dev, int port)
+{
+ u8 pme_status;
+ int ret;
+
+ ret = ksz_pread8(dev, port, REG_PORT_PME_STATUS, &pme_status);
+ if (ret)
+ return ret;
+
+ if (!pme_status)
+ return 0;
+
+ dev_dbg(dev->dev, "Wake event on port %d due to:%s%s%s\n", port,
+ pme_status & PME_WOL_MAGICPKT ? " \"Magic Packet\"" : "",
+ pme_status & PME_WOL_LINKUP ? " \"Link Up\"" : "",
+ pme_status & PME_WOL_ENERGY ? " \"Energy detect\"" : "");
+
+ return ksz_pwrite8(dev, port, REG_PORT_PME_STATUS, pme_status);
+}
+
+/**
+ * ksz9477_get_wol - Get Wake-on-LAN settings for a specified port.
+ * @dev: The device structure.
+ * @port: The port number.
+ * @wol: Pointer to ethtool Wake-on-LAN settings structure.
+ *
+ * This function checks the PME Pin Control Register to see if PME Pin Output
+ * Enable is set, indicating PME is enabled. If enabled, it sets the supported
+ * and active WoL flags.
+ */
+void ksz9477_get_wol(struct ksz_device *dev, int port,
+ struct ethtool_wolinfo *wol)
+{
+ u8 pme_ctrl;
+ int ret;
+
+ if (!dev->wakeup_source)
+ return;
+
+ wol->supported = WAKE_PHY;
+
+ /* Check if the current MAC address on this port can be set
+ * as global for WAKE_MAGIC support. The result may vary
+ * dynamically based on other ports configurations.
+ */
+ if (ksz_is_port_mac_global_usable(dev->ds, port))
+ wol->supported |= WAKE_MAGIC;
+
+ ret = ksz_pread8(dev, port, REG_PORT_PME_CTRL, &pme_ctrl);
+ if (ret)
+ return;
+
+ if (pme_ctrl & PME_WOL_MAGICPKT)
+ wol->wolopts |= WAKE_MAGIC;
+ if (pme_ctrl & (PME_WOL_LINKUP | PME_WOL_ENERGY))
+ wol->wolopts |= WAKE_PHY;
+}
+
+/**
+ * ksz9477_set_wol - Set Wake-on-LAN settings for a specified port.
+ * @dev: The device structure.
+ * @port: The port number.
+ * @wol: Pointer to ethtool Wake-on-LAN settings structure.
+ *
+ * This function configures Wake-on-LAN (WoL) settings for a specified port.
+ * It validates the provided WoL options, checks if PME is enabled via the
+ * switch's PME Pin Control Register, clears any previous wake reasons,
+ * and sets the Magic Packet flag in the port's PME control register if
+ * specified.
+ *
+ * Return: 0 on success, or other error codes on failure.
+ */
+int ksz9477_set_wol(struct ksz_device *dev, int port,
+ struct ethtool_wolinfo *wol)
+{
+ u8 pme_ctrl = 0, pme_ctrl_old = 0;
+ bool magic_switched_off;
+ bool magic_switched_on;
+ int ret;
+
+ if (wol->wolopts & ~(WAKE_PHY | WAKE_MAGIC))
+ return -EINVAL;
+
+ if (!dev->wakeup_source)
+ return -EOPNOTSUPP;
+
+ ret = ksz9477_handle_wake_reason(dev, port);
+ if (ret)
+ return ret;
+
+ if (wol->wolopts & WAKE_MAGIC)
+ pme_ctrl |= PME_WOL_MAGICPKT;
+ if (wol->wolopts & WAKE_PHY)
+ pme_ctrl |= PME_WOL_LINKUP | PME_WOL_ENERGY;
+
+ ret = ksz_pread8(dev, port, REG_PORT_PME_CTRL, &pme_ctrl_old);
+ if (ret)
+ return ret;
+
+ if (pme_ctrl_old == pme_ctrl)
+ return 0;
+
+ magic_switched_off = (pme_ctrl_old & PME_WOL_MAGICPKT) &&
+ !(pme_ctrl & PME_WOL_MAGICPKT);
+ magic_switched_on = !(pme_ctrl_old & PME_WOL_MAGICPKT) &&
+ (pme_ctrl & PME_WOL_MAGICPKT);
+
+ /* To keep reference count of MAC address, we should do this
+ * operation only on change of WOL settings.
+ */
+ if (magic_switched_on) {
+ ret = ksz_switch_macaddr_get(dev->ds, port, NULL);
+ if (ret)
+ return ret;
+ } else if (magic_switched_off) {
+ ksz_switch_macaddr_put(dev->ds);
+ }
+
+ ret = ksz_pwrite8(dev, port, REG_PORT_PME_CTRL, pme_ctrl);
+ if (ret) {
+ if (magic_switched_on)
+ ksz_switch_macaddr_put(dev->ds);
+ return ret;
+ }
+
+ return 0;
+}
+
+/**
+ * ksz9477_wol_pre_shutdown - Prepares the switch device for shutdown while
+ * considering Wake-on-LAN (WoL) settings.
+ * @dev: The switch device structure.
+ * @wol_enabled: Pointer to a boolean which will be set to true if WoL is
+ * enabled on any port.
+ *
+ * This function prepares the switch device for a safe shutdown while taking
+ * into account the Wake-on-LAN (WoL) settings on the user ports. It updates
+ * the wol_enabled flag accordingly to reflect whether WoL is active on any
+ * port.
+ */
+void ksz9477_wol_pre_shutdown(struct ksz_device *dev, bool *wol_enabled)
+{
+ struct dsa_port *dp;
+ int ret;
+
+ *wol_enabled = false;
+
+ if (!dev->wakeup_source)
+ return;
+
+ dsa_switch_for_each_user_port(dp, dev->ds) {
+ u8 pme_ctrl = 0;
+
+ ret = ksz_pread8(dev, dp->index, REG_PORT_PME_CTRL, &pme_ctrl);
+ if (!ret && pme_ctrl)
+ *wol_enabled = true;
+
+ /* make sure there are no pending wake events which would
+ * prevent the device from going to sleep/shutdown.
+ */
+ ksz9477_handle_wake_reason(dev, dp->index);
+ }
+
+ /* Now we are save to enable PME pin. */
+ if (*wol_enabled)
+ ksz_write8(dev, REG_SW_PME_CTRL, PME_ENABLE);
+}
+
static int ksz9477_wait_vlan_ctrl_ready(struct ksz_device *dev)
{
unsigned int val;
@@ -1004,6 +1185,16 @@ void ksz9477_port_setup(struct ksz_device *dev, int port, bool cpu_port)
/* clear pending interrupts */
if (dev->info->internal_phy[port])
ksz_pread16(dev, port, REG_PORT_PHY_INT_ENABLE, &data16);
+
+ ksz9477_port_acl_init(dev, port);
+
+ /* clear pending wake flags */
+ ksz9477_handle_wake_reason(dev, port);
+
+ /* Disable all WoL options by default. Otherwise
+ * ksz_switch_macaddr_get/put logic will not work properly.
+ */
+ ksz_pwrite8(dev, port, REG_PORT_PME_CTRL, 0);
}
void ksz9477_config_cpu_port(struct dsa_switch *ds)
@@ -1126,6 +1317,12 @@ int ksz9477_setup(struct dsa_switch *ds)
/* enable global MIB counter freeze function */
ksz_cfg(dev, REG_SW_MAC_CTRL_6, SW_MIB_COUNTER_FREEZE, true);
+ /* Make sure PME (WoL) is not enabled. If requested, it will be
+ * enabled by ksz9477_wol_pre_shutdown(). Otherwise, some PMICs do not
+ * like PME events changes before shutdown.
+ */
+ ksz_write8(dev, REG_SW_PME_CTRL, 0);
+
return 0;
}
@@ -1141,6 +1338,83 @@ int ksz9477_tc_cbs_set_cinc(struct ksz_device *dev, int port, u32 val)
return ksz_pwrite16(dev, port, REG_PORT_MTI_CREDIT_INCREMENT, val);
}
+/* The KSZ9477 provides following HW features to accelerate
+ * HSR frames handling:
+ *
+ * 1. TX PACKET DUPLICATION FROM HOST TO SWITCH
+ * 2. RX PACKET DUPLICATION DISCARDING
+ * 3. PREVENTING PACKET LOOP IN THE RING BY SELF-ADDRESS FILTERING
+ *
+ * Only one from point 1. has the NETIF_F* flag available.
+ *
+ * Ones from point 2 and 3 are "best effort" - i.e. those will
+ * work correctly most of the time, but it may happen that some
+ * frames will not be caught - to be more specific; there is a race
+ * condition in hardware such that, when duplicate packets are received
+ * on member ports very close in time to each other, the hardware fails
+ * to detect that they are duplicates.
+ *
+ * Hence, the SW needs to handle those special cases. However, the speed
+ * up gain is considerable when above features are used.
+ *
+ * Moreover, the NETIF_F_HW_HSR_FWD feature is also enabled, as HSR frames
+ * can be forwarded in the switch fabric between HSR ports.
+ */
+#define KSZ9477_SUPPORTED_HSR_FEATURES (NETIF_F_HW_HSR_DUP | NETIF_F_HW_HSR_FWD)
+
+void ksz9477_hsr_join(struct dsa_switch *ds, int port, struct net_device *hsr)
+{
+ struct ksz_device *dev = ds->priv;
+ struct net_device *user;
+ struct dsa_port *hsr_dp;
+ u8 data, hsr_ports = 0;
+
+ /* Program which port(s) shall support HSR */
+ ksz_rmw32(dev, REG_HSR_PORT_MAP__4, BIT(port), BIT(port));
+
+ /* Forward frames between HSR ports (i.e. bridge together HSR ports) */
+ if (dev->hsr_ports) {
+ dsa_hsr_foreach_port(hsr_dp, ds, hsr)
+ hsr_ports |= BIT(hsr_dp->index);
+
+ hsr_ports |= BIT(dsa_upstream_port(ds, port));
+ dsa_hsr_foreach_port(hsr_dp, ds, hsr)
+ ksz9477_cfg_port_member(dev, hsr_dp->index, hsr_ports);
+ }
+
+ if (!dev->hsr_ports) {
+ /* Enable discarding of received HSR frames */
+ ksz_read8(dev, REG_HSR_ALU_CTRL_0__1, &data);
+ data |= HSR_DUPLICATE_DISCARD;
+ data &= ~HSR_NODE_UNICAST;
+ ksz_write8(dev, REG_HSR_ALU_CTRL_0__1, data);
+ }
+
+ /* Enable per port self-address filtering.
+ * The global self-address filtering has already been enabled in the
+ * ksz9477_reset_switch() function.
+ */
+ ksz_port_cfg(dev, port, REG_PORT_LUE_CTRL, PORT_SRC_ADDR_FILTER, true);
+
+ /* Setup HW supported features for lan HSR ports */
+ user = dsa_to_port(ds, port)->user;
+ user->features |= KSZ9477_SUPPORTED_HSR_FEATURES;
+}
+
+void ksz9477_hsr_leave(struct dsa_switch *ds, int port, struct net_device *hsr)
+{
+ struct ksz_device *dev = ds->priv;
+
+ /* Clear port HSR support */
+ ksz_rmw32(dev, REG_HSR_PORT_MAP__4, BIT(port), 0);
+
+ /* Disable forwarding frames between HSR ports */
+ ksz9477_cfg_port_member(dev, port, BIT(dsa_upstream_port(ds, port)));
+
+ /* Disable per port self-address filtering */
+ ksz_port_cfg(dev, port, REG_PORT_LUE_CTRL, PORT_SRC_ADDR_FILTER, false);
+}
+
int ksz9477_switch_init(struct ksz_device *dev)
{
u8 data8;
diff --git a/drivers/net/dsa/microchip/ksz9477.h b/drivers/net/dsa/microchip/ksz9477.h
index a6f425866a..ce1e656b80 100644
--- a/drivers/net/dsa/microchip/ksz9477.h
+++ b/drivers/net/dsa/microchip/ksz9477.h
@@ -56,5 +56,48 @@ int ksz9477_reset_switch(struct ksz_device *dev);
int ksz9477_switch_init(struct ksz_device *dev);
void ksz9477_switch_exit(struct ksz_device *dev);
void ksz9477_port_queue_split(struct ksz_device *dev, int port);
+void ksz9477_hsr_join(struct dsa_switch *ds, int port, struct net_device *hsr);
+void ksz9477_hsr_leave(struct dsa_switch *ds, int port, struct net_device *hsr);
+void ksz9477_get_wol(struct ksz_device *dev, int port,
+ struct ethtool_wolinfo *wol);
+int ksz9477_set_wol(struct ksz_device *dev, int port,
+ struct ethtool_wolinfo *wol);
+void ksz9477_wol_pre_shutdown(struct ksz_device *dev, bool *wol_enabled);
+
+int ksz9477_port_acl_init(struct ksz_device *dev, int port);
+void ksz9477_port_acl_free(struct ksz_device *dev, int port);
+int ksz9477_cls_flower_add(struct dsa_switch *ds, int port,
+ struct flow_cls_offload *cls, bool ingress);
+int ksz9477_cls_flower_del(struct dsa_switch *ds, int port,
+ struct flow_cls_offload *cls, bool ingress);
+
+#define KSZ9477_ACL_ENTRY_SIZE 18
+#define KSZ9477_ACL_MAX_ENTRIES 16
+
+struct ksz9477_acl_entry {
+ u8 entry[KSZ9477_ACL_ENTRY_SIZE];
+ unsigned long cookie;
+ u32 prio;
+};
+
+struct ksz9477_acl_entries {
+ struct ksz9477_acl_entry entries[KSZ9477_ACL_MAX_ENTRIES];
+ int entries_count;
+};
+
+struct ksz9477_acl_priv {
+ struct ksz9477_acl_entries acles;
+};
+
+void ksz9477_acl_remove_entries(struct ksz_device *dev, int port,
+ struct ksz9477_acl_entries *acles,
+ unsigned long cookie);
+int ksz9477_acl_write_list(struct ksz_device *dev, int port);
+int ksz9477_sort_acl_entries(struct ksz_device *dev, int port);
+void ksz9477_acl_action_rule_cfg(u8 *entry, bool force_prio, u8 prio_val);
+void ksz9477_acl_processing_rule_set_action(u8 *entry, u8 action_idx);
+void ksz9477_acl_match_process_l2(struct ksz_device *dev, int port,
+ u16 ethtype, u8 *src_mac, u8 *dst_mac,
+ unsigned long cookie, u32 prio);
#endif
diff --git a/drivers/net/dsa/microchip/ksz9477_acl.c b/drivers/net/dsa/microchip/ksz9477_acl.c
new file mode 100644
index 0000000000..7ba778df63
--- /dev/null
+++ b/drivers/net/dsa/microchip/ksz9477_acl.c
@@ -0,0 +1,1436 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2023 Pengutronix, Oleksij Rempel <kernel@pengutronix.de>
+
+/* Access Control List (ACL) structure:
+ *
+ * There are multiple groups of registers involved in ACL configuration:
+ *
+ * - Matching Rules: These registers define the criteria for matching incoming
+ * packets based on their header information (Layer 2 MAC, Layer 3 IP, or
+ * Layer 4 TCP/UDP). Different register settings are used depending on the
+ * matching rule mode (MD) and the Enable (ENB) settings.
+ *
+ * - Action Rules: These registers define how the ACL should modify the packet's
+ * priority, VLAN tag priority, and forwarding map once a matching rule has
+ * been triggered. The settings vary depending on whether the matching rule is
+ * in Count Mode (MD = 01 and ENB = 00) or not.
+ *
+ * - Processing Rules: These registers control the overall behavior of the ACL,
+ * such as selecting which matching rule to apply first, enabling/disabling
+ * specific rules, or specifying actions for matched packets.
+ *
+ * ACL Structure:
+ * +----------------------+
+ * +----------------------+ | (optional) |
+ * | Matching Rules | | Matching Rules |
+ * | (Layer 2, 3, 4) | | (Layer 2, 3, 4) |
+ * +----------------------+ +----------------------+
+ * | |
+ * \___________________________/
+ * v
+ * +----------------------+
+ * | Processing Rules |
+ * | (action idx, |
+ * | matching rule set) |
+ * +----------------------+
+ * |
+ * v
+ * +----------------------+
+ * | Action Rules |
+ * | (Modify Priority, |
+ * | Forwarding Map, |
+ * | VLAN tag, etc) |
+ * +----------------------+
+ */
+
+#include <linux/bitops.h>
+
+#include "ksz9477.h"
+#include "ksz9477_reg.h"
+#include "ksz_common.h"
+
+#define KSZ9477_PORT_ACL_0 0x600
+
+enum ksz9477_acl_port_access {
+ KSZ9477_ACL_PORT_ACCESS_0 = 0x00,
+ KSZ9477_ACL_PORT_ACCESS_1 = 0x01,
+ KSZ9477_ACL_PORT_ACCESS_2 = 0x02,
+ KSZ9477_ACL_PORT_ACCESS_3 = 0x03,
+ KSZ9477_ACL_PORT_ACCESS_4 = 0x04,
+ KSZ9477_ACL_PORT_ACCESS_5 = 0x05,
+ KSZ9477_ACL_PORT_ACCESS_6 = 0x06,
+ KSZ9477_ACL_PORT_ACCESS_7 = 0x07,
+ KSZ9477_ACL_PORT_ACCESS_8 = 0x08,
+ KSZ9477_ACL_PORT_ACCESS_9 = 0x09,
+ KSZ9477_ACL_PORT_ACCESS_A = 0x0A,
+ KSZ9477_ACL_PORT_ACCESS_B = 0x0B,
+ KSZ9477_ACL_PORT_ACCESS_C = 0x0C,
+ KSZ9477_ACL_PORT_ACCESS_D = 0x0D,
+ KSZ9477_ACL_PORT_ACCESS_E = 0x0E,
+ KSZ9477_ACL_PORT_ACCESS_F = 0x0F,
+ KSZ9477_ACL_PORT_ACCESS_10 = 0x10,
+ KSZ9477_ACL_PORT_ACCESS_11 = 0x11
+};
+
+#define KSZ9477_ACL_MD_MASK GENMASK(5, 4)
+#define KSZ9477_ACL_MD_DISABLE 0
+#define KSZ9477_ACL_MD_L2_MAC 1
+#define KSZ9477_ACL_MD_L3_IP 2
+#define KSZ9477_ACL_MD_L4_TCP_UDP 3
+
+#define KSZ9477_ACL_ENB_MASK GENMASK(3, 2)
+#define KSZ9477_ACL_ENB_L2_COUNTER 0
+#define KSZ9477_ACL_ENB_L2_TYPE 1
+#define KSZ9477_ACL_ENB_L2_MAC 2
+#define KSZ9477_ACL_ENB_L2_MAC_TYPE 3
+
+/* only IPv4 src or dst can be used with mask */
+#define KSZ9477_ACL_ENB_L3_IPV4_ADDR_MASK 1
+/* only IPv4 src and dst can be used without mask */
+#define KSZ9477_ACL_ENB_L3_IPV4_ADDR_SRC_DST 2
+
+#define KSZ9477_ACL_ENB_L4_IP_PROTO 0
+#define KSZ9477_ACL_ENB_L4_TCP_SRC_DST_PORT 1
+#define KSZ9477_ACL_ENB_L4_UDP_SRC_DST_PORT 2
+#define KSZ9477_ACL_ENB_L4_TCP_SEQ_NUMBER 3
+
+#define KSZ9477_ACL_SD_SRC BIT(1)
+#define KSZ9477_ACL_SD_DST 0
+#define KSZ9477_ACL_EQ_EQUAL BIT(0)
+#define KSZ9477_ACL_EQ_NOT_EQUAL 0
+
+#define KSZ9477_ACL_PM_M GENMASK(7, 6)
+#define KSZ9477_ACL_PM_DISABLE 0
+#define KSZ9477_ACL_PM_HIGHER 1
+#define KSZ9477_ACL_PM_LOWER 2
+#define KSZ9477_ACL_PM_REPLACE 3
+#define KSZ9477_ACL_P_M GENMASK(5, 3)
+
+#define KSZ9477_PORT_ACL_CTRL_0 0x0612
+
+#define KSZ9477_ACL_WRITE_DONE BIT(6)
+#define KSZ9477_ACL_READ_DONE BIT(5)
+#define KSZ9477_ACL_WRITE BIT(4)
+#define KSZ9477_ACL_INDEX_M GENMASK(3, 0)
+
+/**
+ * ksz9477_dump_acl_index - Print the ACL entry at the specified index
+ *
+ * @dev: Pointer to the ksz9477 device structure.
+ * @acle: Pointer to the ACL entry array.
+ * @index: The index of the ACL entry to print.
+ *
+ * This function prints the details of an ACL entry, located at a particular
+ * index within the ksz9477 device's ACL table. It omits printing entries that
+ * are empty.
+ *
+ * Return: 1 if the entry is non-empty and printed, 0 otherwise.
+ */
+static int ksz9477_dump_acl_index(struct ksz_device *dev,
+ struct ksz9477_acl_entry *acle, int index)
+{
+ bool empty = true;
+ char buf[64];
+ u8 *entry;
+ int i;
+
+ entry = &acle[index].entry[0];
+ for (i = 0; i <= KSZ9477_ACL_PORT_ACCESS_11; i++) {
+ if (entry[i])
+ empty = false;
+
+ sprintf(buf + (i * 3), "%02x ", entry[i]);
+ }
+
+ /* no need to print empty entries */
+ if (empty)
+ return 0;
+
+ dev_err(dev->dev, " Entry %02d, prio: %02d : %s", index,
+ acle[index].prio, buf);
+
+ return 1;
+}
+
+/**
+ * ksz9477_dump_acl - Print ACL entries
+ *
+ * @dev: Pointer to the device structure.
+ * @acle: Pointer to the ACL entry array.
+ */
+static void ksz9477_dump_acl(struct ksz_device *dev,
+ struct ksz9477_acl_entry *acle)
+{
+ int count = 0;
+ int i;
+
+ for (i = 0; i < KSZ9477_ACL_MAX_ENTRIES; i++)
+ count += ksz9477_dump_acl_index(dev, acle, i);
+
+ if (count != KSZ9477_ACL_MAX_ENTRIES - 1)
+ dev_err(dev->dev, " Empty ACL entries were skipped\n");
+}
+
+/**
+ * ksz9477_acl_is_valid_matching_rule - Check if an ACL entry contains a valid
+ * matching rule.
+ *
+ * @entry: Pointer to ACL entry buffer
+ *
+ * This function checks if the given ACL entry buffer contains a valid
+ * matching rule by inspecting the Mode (MD) and Enable (ENB) fields.
+ *
+ * Returns: True if it's a valid matching rule, false otherwise.
+ */
+static bool ksz9477_acl_is_valid_matching_rule(u8 *entry)
+{
+ u8 val1, md, enb;
+
+ val1 = entry[KSZ9477_ACL_PORT_ACCESS_1];
+
+ md = FIELD_GET(KSZ9477_ACL_MD_MASK, val1);
+ if (md == KSZ9477_ACL_MD_DISABLE)
+ return false;
+
+ if (md == KSZ9477_ACL_MD_L2_MAC) {
+ /* L2 counter is not support, so it is not valid rule for now */
+ enb = FIELD_GET(KSZ9477_ACL_ENB_MASK, val1);
+ if (enb == KSZ9477_ACL_ENB_L2_COUNTER)
+ return false;
+ }
+
+ return true;
+}
+
+/**
+ * ksz9477_acl_get_cont_entr - Get count of contiguous ACL entries and validate
+ * the matching rules.
+ * @dev: Pointer to the KSZ9477 device structure.
+ * @port: Port number.
+ * @index: Index of the starting ACL entry.
+ *
+ * Based on the KSZ9477 switch's Access Control List (ACL) system, the RuleSet
+ * in an ACL entry indicates which entries contain Matching rules linked to it.
+ * This RuleSet is represented by two registers: KSZ9477_ACL_PORT_ACCESS_E and
+ * KSZ9477_ACL_PORT_ACCESS_F. Each bit set in these registers corresponds to
+ * an entry containing a Matching rule for this RuleSet.
+ *
+ * For a single Matching rule linked, only one bit is set. However, when an
+ * entry links multiple Matching rules, forming what's termed a 'complex rule',
+ * multiple bits are set in these registers.
+ *
+ * This function checks that, for complex rules, the entries containing the
+ * linked Matching rules are contiguous in terms of their indices. It calculates
+ * and returns the number of these contiguous entries.
+ *
+ * Returns:
+ * - 0 if the entry is empty and can be safely overwritten
+ * - 1 if the entry represents a simple rule
+ * - The number of contiguous entries if it is the root entry of a complex
+ * rule
+ * - -ENOTEMPTY if the entry is part of a complex rule but not the root
+ * entry
+ * - -EINVAL if the validation fails
+ */
+static int ksz9477_acl_get_cont_entr(struct ksz_device *dev, int port,
+ int index)
+{
+ struct ksz9477_acl_priv *acl = dev->ports[port].acl_priv;
+ struct ksz9477_acl_entries *acles = &acl->acles;
+ int start_idx, end_idx, contiguous_count;
+ unsigned long val;
+ u8 vale, valf;
+ u8 *entry;
+ int i;
+
+ entry = &acles->entries[index].entry[0];
+ vale = entry[KSZ9477_ACL_PORT_ACCESS_E];
+ valf = entry[KSZ9477_ACL_PORT_ACCESS_F];
+
+ val = (vale << 8) | valf;
+
+ /* If no bits are set, return an appropriate value or error */
+ if (!val) {
+ if (ksz9477_acl_is_valid_matching_rule(entry)) {
+ /* Looks like we are about to corrupt some complex rule.
+ * Do not print an error here, as this is a normal case
+ * when we are trying to find a free or starting entry.
+ */
+ dev_dbg(dev->dev, "ACL: entry %d starting with a valid matching rule, but no bits set in RuleSet\n",
+ index);
+ return -ENOTEMPTY;
+ }
+
+ /* This entry does not contain a valid matching rule */
+ return 0;
+ }
+
+ start_idx = find_first_bit((unsigned long *)&val, 16);
+ end_idx = find_last_bit((unsigned long *)&val, 16);
+
+ /* Calculate the contiguous count */
+ contiguous_count = end_idx - start_idx + 1;
+
+ /* Check if the number of bits set in val matches our calculated count */
+ if (contiguous_count != hweight16(val)) {
+ /* Probably we have a fragmented complex rule, which is not
+ * supported by this driver.
+ */
+ dev_err(dev->dev, "ACL: number of bits set in RuleSet does not match calculated count\n");
+ return -EINVAL;
+ }
+
+ /* loop over the contiguous entries and check for valid matching rules */
+ for (i = start_idx; i <= end_idx; i++) {
+ u8 *current_entry = &acles->entries[i].entry[0];
+
+ if (!ksz9477_acl_is_valid_matching_rule(current_entry)) {
+ /* we have something linked without a valid matching
+ * rule. ACL table?
+ */
+ dev_err(dev->dev, "ACL: entry %d does not contain a valid matching rule\n",
+ i);
+ return -EINVAL;
+ }
+
+ if (i > start_idx) {
+ vale = current_entry[KSZ9477_ACL_PORT_ACCESS_E];
+ valf = current_entry[KSZ9477_ACL_PORT_ACCESS_F];
+ /* Following entry should have empty linkage list */
+ if (vale || valf) {
+ dev_err(dev->dev, "ACL: entry %d has non-empty RuleSet linkage\n",
+ i);
+ return -EINVAL;
+ }
+ }
+ }
+
+ return contiguous_count;
+}
+
+/**
+ * ksz9477_acl_update_linkage - Update the RuleSet linkage for an ACL entry
+ * after a move operation.
+ *
+ * @dev: Pointer to the ksz_device.
+ * @entry: Pointer to the ACL entry array.
+ * @old_idx: The original index of the ACL entry before moving.
+ * @new_idx: The new index of the ACL entry after moving.
+ *
+ * This function updates the RuleSet linkage bits for an ACL entry when
+ * it's moved from one position to another in the ACL table. The RuleSet
+ * linkage is represented by two 8-bit registers, which are combined
+ * into a 16-bit value for easier manipulation. The linkage bits are shifted
+ * based on the difference between the old and new index. If any bits are lost
+ * during the shift operation, an error is returned.
+ *
+ * Note: Fragmentation within a RuleSet is not supported. Hence, entries must
+ * be moved as complete blocks, maintaining the integrity of the RuleSet.
+ *
+ * Returns: 0 on success, or -EINVAL if any RuleSet linkage bits are lost
+ * during the move.
+ */
+static int ksz9477_acl_update_linkage(struct ksz_device *dev, u8 *entry,
+ u16 old_idx, u16 new_idx)
+{
+ unsigned int original_bit_count;
+ unsigned long rule_linkage;
+ u8 vale, valf, val0;
+ int shift;
+
+ val0 = entry[KSZ9477_ACL_PORT_ACCESS_0];
+ vale = entry[KSZ9477_ACL_PORT_ACCESS_E];
+ valf = entry[KSZ9477_ACL_PORT_ACCESS_F];
+
+ /* Combine the two u8 values into one u16 for easier manipulation */
+ rule_linkage = (vale << 8) | valf;
+ original_bit_count = hweight16(rule_linkage);
+
+ /* Even if HW is able to handle fragmented RuleSet, we don't support it.
+ * RuleSet is filled only for the first entry of the set.
+ */
+ if (!rule_linkage)
+ return 0;
+
+ if (val0 != old_idx) {
+ dev_err(dev->dev, "ACL: entry %d has unexpected ActionRule linkage: %d\n",
+ old_idx, val0);
+ return -EINVAL;
+ }
+
+ val0 = new_idx;
+
+ /* Calculate the number of positions to shift */
+ shift = new_idx - old_idx;
+
+ /* Shift the RuleSet */
+ if (shift > 0)
+ rule_linkage <<= shift;
+ else
+ rule_linkage >>= -shift;
+
+ /* Check that no bits were lost in the process */
+ if (original_bit_count != hweight16(rule_linkage)) {
+ dev_err(dev->dev, "ACL RuleSet linkage bits lost during move\n");
+ return -EINVAL;
+ }
+
+ entry[KSZ9477_ACL_PORT_ACCESS_0] = val0;
+
+ /* Update the RuleSet bitfields in the entry */
+ entry[KSZ9477_ACL_PORT_ACCESS_E] = (rule_linkage >> 8) & 0xFF;
+ entry[KSZ9477_ACL_PORT_ACCESS_F] = rule_linkage & 0xFF;
+
+ return 0;
+}
+
+/**
+ * ksz9477_validate_and_get_src_count - Validate source and destination indices
+ * and determine the source entry count.
+ * @dev: Pointer to the KSZ device structure.
+ * @port: Port number on the KSZ device where the ACL entries reside.
+ * @src_idx: Index of the starting ACL entry that needs to be validated.
+ * @dst_idx: Index of the destination where the source entries are intended to
+ * be moved.
+ * @src_count: Pointer to the variable that will hold the number of contiguous
+ * source entries if the validation passes.
+ * @dst_count: Pointer to the variable that will hold the number of contiguous
+ * destination entries if the validation passes.
+ *
+ * This function performs validation on the source and destination indices
+ * provided for ACL entries. It checks if the indices are within the valid
+ * range, and if the source entries are contiguous. Additionally, the function
+ * ensures that there's adequate space at the destination for the source entries
+ * and that the destination index isn't in the middle of a RuleSet. If all
+ * validations pass, the function returns the number of contiguous source and
+ * destination entries.
+ *
+ * Return: 0 on success, otherwise returns a negative error code if any
+ * validation check fails.
+ */
+static int ksz9477_validate_and_get_src_count(struct ksz_device *dev, int port,
+ int src_idx, int dst_idx,
+ int *src_count, int *dst_count)
+{
+ int ret;
+
+ if (src_idx >= KSZ9477_ACL_MAX_ENTRIES ||
+ dst_idx >= KSZ9477_ACL_MAX_ENTRIES) {
+ dev_err(dev->dev, "ACL: invalid entry index\n");
+ return -EINVAL;
+ }
+
+ /* Validate if the source entries are contiguous */
+ ret = ksz9477_acl_get_cont_entr(dev, port, src_idx);
+ if (ret < 0)
+ return ret;
+ *src_count = ret;
+
+ if (!*src_count) {
+ dev_err(dev->dev, "ACL: source entry is empty\n");
+ return -EINVAL;
+ }
+
+ if (dst_idx + *src_count >= KSZ9477_ACL_MAX_ENTRIES) {
+ dev_err(dev->dev, "ACL: Not enough space at the destination. Move operation will fail.\n");
+ return -EINVAL;
+ }
+
+ /* Validate if the destination entry is empty or not in the middle of
+ * a RuleSet.
+ */
+ ret = ksz9477_acl_get_cont_entr(dev, port, dst_idx);
+ if (ret < 0)
+ return ret;
+ *dst_count = ret;
+
+ return 0;
+}
+
+/**
+ * ksz9477_move_entries_downwards - Move a range of ACL entries downwards in
+ * the list.
+ * @dev: Pointer to the KSZ device structure.
+ * @acles: Pointer to the structure encapsulating all the ACL entries.
+ * @start_idx: Starting index of the entries to be relocated.
+ * @num_entries_to_move: Number of consecutive entries to be relocated.
+ * @end_idx: Destination index where the first entry should be situated post
+ * relocation.
+ *
+ * This function is responsible for rearranging a specific block of ACL entries
+ * by shifting them downwards in the list based on the supplied source and
+ * destination indices. It ensures that the linkage between the ACL entries is
+ * maintained accurately after the relocation.
+ *
+ * Return: 0 on successful relocation of entries, otherwise returns a negative
+ * error code.
+ */
+static int ksz9477_move_entries_downwards(struct ksz_device *dev,
+ struct ksz9477_acl_entries *acles,
+ u16 start_idx,
+ u16 num_entries_to_move,
+ u16 end_idx)
+{
+ struct ksz9477_acl_entry *e;
+ int ret, i;
+
+ for (i = start_idx; i < end_idx; i++) {
+ e = &acles->entries[i];
+ *e = acles->entries[i + num_entries_to_move];
+
+ ret = ksz9477_acl_update_linkage(dev, &e->entry[0],
+ i + num_entries_to_move, i);
+ if (ret < 0)
+ return ret;
+ }
+
+ return 0;
+}
+
+/**
+ * ksz9477_move_entries_upwards - Move a range of ACL entries upwards in the
+ * list.
+ * @dev: Pointer to the KSZ device structure.
+ * @acles: Pointer to the structure holding all the ACL entries.
+ * @start_idx: The starting index of the entries to be moved.
+ * @num_entries_to_move: Number of contiguous entries to be moved.
+ * @target_idx: The destination index where the first entry should be placed
+ * after moving.
+ *
+ * This function rearranges a chunk of ACL entries by moving them upwards
+ * in the list based on the given source and destination indices. The reordering
+ * process preserves the linkage between entries by updating it accordingly.
+ *
+ * Return: 0 if the entries were successfully moved, otherwise a negative error
+ * code.
+ */
+static int ksz9477_move_entries_upwards(struct ksz_device *dev,
+ struct ksz9477_acl_entries *acles,
+ u16 start_idx, u16 num_entries_to_move,
+ u16 target_idx)
+{
+ struct ksz9477_acl_entry *e;
+ int ret, i, b;
+
+ for (i = start_idx; i > target_idx; i--) {
+ b = i + num_entries_to_move - 1;
+
+ e = &acles->entries[b];
+ *e = acles->entries[i - 1];
+
+ ret = ksz9477_acl_update_linkage(dev, &e->entry[0], i - 1, b);
+ if (ret < 0)
+ return ret;
+ }
+
+ return 0;
+}
+
+/**
+ * ksz9477_acl_move_entries - Move a block of contiguous ACL entries from a
+ * source to a destination index.
+ * @dev: Pointer to the KSZ9477 device structure.
+ * @port: Port number.
+ * @src_idx: Index of the starting source ACL entry.
+ * @dst_idx: Index of the starting destination ACL entry.
+ *
+ * This function aims to move a block of contiguous ACL entries from the source
+ * index to the destination index while ensuring the integrity and validity of
+ * the ACL table.
+ *
+ * In case of any errors during the adjustments or copying, the function will
+ * restore the ACL entries to their original state from the backup.
+ *
+ * Return: 0 if the move operation is successful. Returns -EINVAL for validation
+ * errors or other error codes based on specific failure conditions.
+ */
+static int ksz9477_acl_move_entries(struct ksz_device *dev, int port,
+ u16 src_idx, u16 dst_idx)
+{
+ struct ksz9477_acl_entry buffer[KSZ9477_ACL_MAX_ENTRIES];
+ struct ksz9477_acl_priv *acl = dev->ports[port].acl_priv;
+ struct ksz9477_acl_entries *acles = &acl->acles;
+ int src_count, ret, dst_count;
+
+ /* Nothing to do */
+ if (src_idx == dst_idx)
+ return 0;
+
+ ret = ksz9477_validate_and_get_src_count(dev, port, src_idx, dst_idx,
+ &src_count, &dst_count);
+ if (ret)
+ return ret;
+
+ /* In case dst_index is greater than src_index, we need to adjust the
+ * destination index to account for the entries that will be moved
+ * downwards and the size of the entry located at dst_idx.
+ */
+ if (dst_idx > src_idx)
+ dst_idx = dst_idx + dst_count - src_count;
+
+ /* Copy source block to buffer and update its linkage */
+ for (int i = 0; i < src_count; i++) {
+ buffer[i] = acles->entries[src_idx + i];
+ ret = ksz9477_acl_update_linkage(dev, &buffer[i].entry[0],
+ src_idx + i, dst_idx + i);
+ if (ret < 0)
+ return ret;
+ }
+
+ /* Adjust other entries and their linkage based on destination */
+ if (dst_idx > src_idx) {
+ ret = ksz9477_move_entries_downwards(dev, acles, src_idx,
+ src_count, dst_idx);
+ } else {
+ ret = ksz9477_move_entries_upwards(dev, acles, src_idx,
+ src_count, dst_idx);
+ }
+ if (ret < 0)
+ return ret;
+
+ /* Copy buffer to destination block */
+ for (int i = 0; i < src_count; i++)
+ acles->entries[dst_idx + i] = buffer[i];
+
+ return 0;
+}
+
+/**
+ * ksz9477_get_next_block_start - Identify the starting index of the next ACL
+ * block.
+ * @dev: Pointer to the device structure.
+ * @port: The port number on which the ACL entries are being checked.
+ * @start: The starting index from which the search begins.
+ *
+ * This function looks for the next valid ACL block starting from the provided
+ * 'start' index and returns the beginning index of that block. If the block is
+ * invalid or if it reaches the end of the ACL entries without finding another
+ * block, it returns the maximum ACL entries count.
+ *
+ * Returns:
+ * - The starting index of the next valid ACL block.
+ * - KSZ9477_ACL_MAX_ENTRIES if no other valid blocks are found after 'start'.
+ * - A negative error code if an error occurs while checking.
+ */
+static int ksz9477_get_next_block_start(struct ksz_device *dev, int port,
+ int start)
+{
+ int block_size;
+
+ for (int i = start; i < KSZ9477_ACL_MAX_ENTRIES;) {
+ block_size = ksz9477_acl_get_cont_entr(dev, port, i);
+ if (block_size < 0 && block_size != -ENOTEMPTY)
+ return block_size;
+
+ if (block_size > 0)
+ return i;
+
+ i++;
+ }
+ return KSZ9477_ACL_MAX_ENTRIES;
+}
+
+/**
+ * ksz9477_swap_acl_blocks - Swap two ACL blocks
+ * @dev: Pointer to the device structure.
+ * @port: The port number on which the ACL blocks are to be swapped.
+ * @i: The starting index of the first ACL block.
+ * @j: The starting index of the second ACL block.
+ *
+ * This function is used to swap two ACL blocks present at given indices. The
+ * main purpose is to aid in the sorting and reordering of ACL blocks based on
+ * certain criteria, e.g., priority. It checks the validity of the block at
+ * index 'i', ensuring it's not an empty block, and then proceeds to swap it
+ * with the block at index 'j'.
+ *
+ * Returns:
+ * - 0 on successful swapping of blocks.
+ * - -EINVAL if the block at index 'i' is empty.
+ * - A negative error code if any other error occurs during the swap.
+ */
+static int ksz9477_swap_acl_blocks(struct ksz_device *dev, int port, int i,
+ int j)
+{
+ int ret, current_block_size;
+
+ current_block_size = ksz9477_acl_get_cont_entr(dev, port, i);
+ if (current_block_size < 0)
+ return current_block_size;
+
+ if (!current_block_size) {
+ dev_err(dev->dev, "ACL: swapping empty entry %d\n", i);
+ return -EINVAL;
+ }
+
+ ret = ksz9477_acl_move_entries(dev, port, i, j);
+ if (ret)
+ return ret;
+
+ ret = ksz9477_acl_move_entries(dev, port, j - current_block_size, i);
+ if (ret)
+ return ret;
+
+ return 0;
+}
+
+/**
+ * ksz9477_sort_acl_entr_no_back - Sort ACL entries for a given port based on
+ * priority without backing up entries.
+ * @dev: Pointer to the device structure.
+ * @port: The port number whose ACL entries need to be sorted.
+ *
+ * This function sorts ACL entries of the specified port using a variant of the
+ * bubble sort algorithm. It operates on blocks of ACL entries rather than
+ * individual entries. Each block's starting point is identified and then
+ * compared with subsequent blocks based on their priority. If the current
+ * block has a lower priority than the subsequent block, the two blocks are
+ * swapped.
+ *
+ * This is done in order to maintain an organized order of ACL entries based on
+ * priority, ensuring efficient and predictable ACL rule application.
+ *
+ * Returns:
+ * - 0 on successful sorting of entries.
+ * - A negative error code if any issue arises during sorting, e.g.,
+ * if the function is unable to get the next block start.
+ */
+static int ksz9477_sort_acl_entr_no_back(struct ksz_device *dev, int port)
+{
+ struct ksz9477_acl_priv *acl = dev->ports[port].acl_priv;
+ struct ksz9477_acl_entries *acles = &acl->acles;
+ struct ksz9477_acl_entry *curr, *next;
+ int i, j, ret;
+
+ /* Bubble sort */
+ for (i = 0; i < KSZ9477_ACL_MAX_ENTRIES;) {
+ curr = &acles->entries[i];
+
+ j = ksz9477_get_next_block_start(dev, port, i + 1);
+ if (j < 0)
+ return j;
+
+ while (j < KSZ9477_ACL_MAX_ENTRIES) {
+ next = &acles->entries[j];
+
+ if (curr->prio > next->prio) {
+ ret = ksz9477_swap_acl_blocks(dev, port, i, j);
+ if (ret)
+ return ret;
+ }
+
+ j = ksz9477_get_next_block_start(dev, port, j + 1);
+ if (j < 0)
+ return j;
+ }
+
+ i = ksz9477_get_next_block_start(dev, port, i + 1);
+ if (i < 0)
+ return i;
+ }
+
+ return 0;
+}
+
+/**
+ * ksz9477_sort_acl_entries - Sort the ACL entries for a given port.
+ * @dev: Pointer to the KSZ device.
+ * @port: Port number.
+ *
+ * This function sorts the Access Control List (ACL) entries for a specified
+ * port. Before sorting, a backup of the original entries is created. If the
+ * sorting process fails, the function will log error messages displaying both
+ * the original and attempted sorted entries, and then restore the original
+ * entries from the backup.
+ *
+ * Return: 0 if the sorting succeeds, otherwise a negative error code.
+ */
+int ksz9477_sort_acl_entries(struct ksz_device *dev, int port)
+{
+ struct ksz9477_acl_entry backup[KSZ9477_ACL_MAX_ENTRIES];
+ struct ksz9477_acl_priv *acl = dev->ports[port].acl_priv;
+ struct ksz9477_acl_entries *acles = &acl->acles;
+ int ret;
+
+ /* create a backup of the ACL entries, if something goes wrong
+ * we can restore the ACL entries.
+ */
+ memcpy(backup, acles->entries, sizeof(backup));
+
+ ret = ksz9477_sort_acl_entr_no_back(dev, port);
+ if (ret) {
+ dev_err(dev->dev, "ACL: failed to sort entries for port %d\n",
+ port);
+ dev_err(dev->dev, "ACL dump before sorting:\n");
+ ksz9477_dump_acl(dev, backup);
+ dev_err(dev->dev, "ACL dump after sorting:\n");
+ ksz9477_dump_acl(dev, acles->entries);
+ /* Restore the original entries */
+ memcpy(acles->entries, backup, sizeof(backup));
+ }
+
+ return ret;
+}
+
+/**
+ * ksz9477_acl_wait_ready - Waits for the ACL operation to complete on a given
+ * port.
+ * @dev: The ksz_device instance.
+ * @port: The port number to wait for.
+ *
+ * This function checks if the ACL write or read operation is completed by
+ * polling the specified register.
+ *
+ * Returns: 0 if the operation is successful, or a negative error code if an
+ * error occurs.
+ */
+static int ksz9477_acl_wait_ready(struct ksz_device *dev, int port)
+{
+ unsigned int wr_mask = KSZ9477_ACL_WRITE_DONE | KSZ9477_ACL_READ_DONE;
+ unsigned int val, reg;
+ int ret;
+
+ reg = dev->dev_ops->get_port_addr(port, KSZ9477_PORT_ACL_CTRL_0);
+
+ ret = regmap_read_poll_timeout(dev->regmap[0], reg, val,
+ (val & wr_mask) == wr_mask, 1000, 10000);
+ if (ret)
+ dev_err(dev->dev, "Failed to read/write ACL table\n");
+
+ return ret;
+}
+
+/**
+ * ksz9477_acl_entry_write - Writes an ACL entry to a given port at the
+ * specified index.
+ * @dev: The ksz_device instance.
+ * @port: The port number to write the ACL entry to.
+ * @entry: A pointer to the ACL entry data.
+ * @idx: The index at which to write the ACL entry.
+ *
+ * This function writes the provided ACL entry to the specified port at the
+ * given index.
+ *
+ * Returns: 0 if the operation is successful, or a negative error code if an
+ * error occurs.
+ */
+static int ksz9477_acl_entry_write(struct ksz_device *dev, int port, u8 *entry,
+ int idx)
+{
+ int ret, i;
+ u8 val;
+
+ for (i = 0; i < KSZ9477_ACL_ENTRY_SIZE; i++) {
+ ret = ksz_pwrite8(dev, port, KSZ9477_PORT_ACL_0 + i, entry[i]);
+ if (ret) {
+ dev_err(dev->dev, "Failed to write ACL entry %d\n", i);
+ return ret;
+ }
+ }
+
+ /* write everything down */
+ val = FIELD_PREP(KSZ9477_ACL_INDEX_M, idx) | KSZ9477_ACL_WRITE;
+ ret = ksz_pwrite8(dev, port, KSZ9477_PORT_ACL_CTRL_0, val);
+ if (ret)
+ return ret;
+
+ /* wait until everything is written */
+ return ksz9477_acl_wait_ready(dev, port);
+}
+
+/**
+ * ksz9477_acl_port_enable - Enables ACL functionality on a given port.
+ * @dev: The ksz_device instance.
+ * @port: The port number on which to enable ACL functionality.
+ *
+ * This function enables ACL functionality on the specified port by configuring
+ * the appropriate control registers. It returns 0 if the operation is
+ * successful, or a negative error code if an error occurs.
+ *
+ * 0xn801 - KSZ9477S 5.2.8.2 Port Priority Control Register
+ * Bit 7 - Highest Priority
+ * Bit 6 - OR'ed Priority
+ * Bit 4 - MAC Address Priority Classification
+ * Bit 3 - VLAN Priority Classification
+ * Bit 2 - 802.1p Priority Classification
+ * Bit 1 - Diffserv Priority Classification
+ * Bit 0 - ACL Priority Classification
+ *
+ * Current driver implementation sets 802.1p priority classification by default.
+ * In this function we add ACL priority classification with OR'ed priority.
+ * According to testing, priority set by ACL will supersede the 802.1p priority.
+ *
+ * 0xn803 - KSZ9477S 5.2.8.4 Port Authentication Control Register
+ * Bit 2 - Access Control List (ACL) Enable
+ * Bits 1:0 - Authentication Mode
+ * 00 = Reserved
+ * 01 = Block Mode. Authentication is enabled. When ACL is
+ * enabled, all traffic that misses the ACL rules is
+ * blocked; otherwise ACL actions apply.
+ * 10 = Pass Mode. Authentication is disabled. When ACL is
+ * enabled, all traffic that misses the ACL rules is
+ * forwarded; otherwise ACL actions apply.
+ * 11 = Trap Mode. Authentication is enabled. All traffic is
+ * forwarded to the host port. When ACL is enabled, all
+ * traffic that misses the ACL rules is blocked; otherwise
+ * ACL actions apply.
+ *
+ * We are using Pass Mode int this function.
+ *
+ * Returns: 0 if the operation is successful, or a negative error code if an
+ * error occurs.
+ */
+static int ksz9477_acl_port_enable(struct ksz_device *dev, int port)
+{
+ int ret;
+
+ ret = ksz_prmw8(dev, port, P_PRIO_CTRL, 0, PORT_ACL_PRIO_ENABLE |
+ PORT_OR_PRIO);
+ if (ret)
+ return ret;
+
+ return ksz_pwrite8(dev, port, REG_PORT_MRI_AUTHEN_CTRL,
+ PORT_ACL_ENABLE |
+ FIELD_PREP(PORT_AUTHEN_MODE, PORT_AUTHEN_PASS));
+}
+
+/**
+ * ksz9477_acl_port_disable - Disables ACL functionality on a given port.
+ * @dev: The ksz_device instance.
+ * @port: The port number on which to disable ACL functionality.
+ *
+ * This function disables ACL functionality on the specified port by writing a
+ * value of 0 to the REG_PORT_MRI_AUTHEN_CTRL control register and remove
+ * PORT_ACL_PRIO_ENABLE bit from P_PRIO_CTRL register.
+ *
+ * Returns: 0 if the operation is successful, or a negative error code if an
+ * error occurs.
+ */
+static int ksz9477_acl_port_disable(struct ksz_device *dev, int port)
+{
+ int ret;
+
+ ret = ksz_prmw8(dev, port, P_PRIO_CTRL, PORT_ACL_PRIO_ENABLE, 0);
+ if (ret)
+ return ret;
+
+ return ksz_pwrite8(dev, port, REG_PORT_MRI_AUTHEN_CTRL, 0);
+}
+
+/**
+ * ksz9477_acl_write_list - Write a list of ACL entries to a given port.
+ * @dev: The ksz_device instance.
+ * @port: The port number on which to write ACL entries.
+ *
+ * This function enables ACL functionality on the specified port, writes a list
+ * of ACL entries to the port, and disables ACL functionality if there are no
+ * entries.
+ *
+ * Returns: 0 if the operation is successful, or a negative error code if an
+ * error occurs.
+ */
+int ksz9477_acl_write_list(struct ksz_device *dev, int port)
+{
+ struct ksz9477_acl_priv *acl = dev->ports[port].acl_priv;
+ struct ksz9477_acl_entries *acles = &acl->acles;
+ int ret, i;
+
+ /* ACL should be enabled before writing entries */
+ ret = ksz9477_acl_port_enable(dev, port);
+ if (ret)
+ return ret;
+
+ /* write all entries */
+ for (i = 0; i < ARRAY_SIZE(acles->entries); i++) {
+ u8 *entry = acles->entries[i].entry;
+
+ /* Check if entry was removed and should be zeroed.
+ * If last fields of the entry are not zero, it means
+ * it is removed locally but currently not synced with the HW.
+ * So, we will write it down to the HW to remove it.
+ */
+ if (i >= acles->entries_count &&
+ entry[KSZ9477_ACL_PORT_ACCESS_10] == 0 &&
+ entry[KSZ9477_ACL_PORT_ACCESS_11] == 0)
+ continue;
+
+ ret = ksz9477_acl_entry_write(dev, port, entry, i);
+ if (ret)
+ return ret;
+
+ /* now removed entry is clean on HW side, so it can
+ * in the cache too
+ */
+ if (i >= acles->entries_count &&
+ entry[KSZ9477_ACL_PORT_ACCESS_10] != 0 &&
+ entry[KSZ9477_ACL_PORT_ACCESS_11] != 0) {
+ entry[KSZ9477_ACL_PORT_ACCESS_10] = 0;
+ entry[KSZ9477_ACL_PORT_ACCESS_11] = 0;
+ }
+ }
+
+ if (!acles->entries_count)
+ return ksz9477_acl_port_disable(dev, port);
+
+ return 0;
+}
+
+/**
+ * ksz9477_acl_remove_entries - Remove ACL entries with a given cookie from a
+ * specified ksz9477_acl_entries structure.
+ * @dev: The ksz_device instance.
+ * @port: The port number on which to remove ACL entries.
+ * @acles: The ksz9477_acl_entries instance.
+ * @cookie: The cookie value to match for entry removal.
+ *
+ * This function iterates through the entries array, removing any entries with
+ * a matching cookie value. The remaining entries are then shifted down to fill
+ * the gap.
+ */
+void ksz9477_acl_remove_entries(struct ksz_device *dev, int port,
+ struct ksz9477_acl_entries *acles,
+ unsigned long cookie)
+{
+ int entries_count = acles->entries_count;
+ int ret, i, src_count;
+ int src_idx = -1;
+
+ if (!entries_count)
+ return;
+
+ /* Search for the first position with the cookie */
+ for (i = 0; i < entries_count; i++) {
+ if (acles->entries[i].cookie == cookie) {
+ src_idx = i;
+ break;
+ }
+ }
+
+ /* No entries with the matching cookie found */
+ if (src_idx == -1)
+ return;
+
+ /* Get the size of the cookie entry. We may have complex entries. */
+ src_count = ksz9477_acl_get_cont_entr(dev, port, src_idx);
+ if (src_count <= 0)
+ return;
+
+ /* Move all entries down to overwrite removed entry with the cookie */
+ ret = ksz9477_move_entries_downwards(dev, acles, src_idx,
+ src_count,
+ entries_count - src_count);
+ if (ret) {
+ dev_err(dev->dev, "Failed to move ACL entries down\n");
+ return;
+ }
+
+ /* Overwrite new empty places at the end of the list with zeros to make
+ * sure not unexpected things will happen or no unexplored quirks will
+ * come out.
+ */
+ for (i = entries_count - src_count; i < entries_count; i++) {
+ struct ksz9477_acl_entry *entry = &acles->entries[i];
+
+ memset(entry, 0, sizeof(*entry));
+
+ /* Set all access bits to be able to write zeroed entry to HW */
+ entry->entry[KSZ9477_ACL_PORT_ACCESS_10] = 0xff;
+ entry->entry[KSZ9477_ACL_PORT_ACCESS_11] = 0xff;
+ }
+
+ /* Adjust the total entries count */
+ acles->entries_count -= src_count;
+}
+
+/**
+ * ksz9477_port_acl_init - Initialize the ACL for a specified port on a ksz
+ * device.
+ * @dev: The ksz_device instance.
+ * @port: The port number to initialize the ACL for.
+ *
+ * This function allocates memory for an acl structure, associates it with the
+ * specified port, and initializes the ACL entries to a default state. The
+ * entries are then written using the ksz9477_acl_write_list function, ensuring
+ * the ACL has a predictable initial hardware state.
+ *
+ * Returns: 0 on success, or an error code on failure.
+ */
+int ksz9477_port_acl_init(struct ksz_device *dev, int port)
+{
+ struct ksz9477_acl_entries *acles;
+ struct ksz9477_acl_priv *acl;
+ int ret, i;
+
+ acl = kzalloc(sizeof(*acl), GFP_KERNEL);
+ if (!acl)
+ return -ENOMEM;
+
+ dev->ports[port].acl_priv = acl;
+
+ acles = &acl->acles;
+ /* write all entries */
+ for (i = 0; i < ARRAY_SIZE(acles->entries); i++) {
+ u8 *entry = acles->entries[i].entry;
+
+ /* Set all access bits to be able to write zeroed
+ * entry
+ */
+ entry[KSZ9477_ACL_PORT_ACCESS_10] = 0xff;
+ entry[KSZ9477_ACL_PORT_ACCESS_11] = 0xff;
+ }
+
+ ret = ksz9477_acl_write_list(dev, port);
+ if (ret)
+ goto free_acl;
+
+ return 0;
+
+free_acl:
+ kfree(dev->ports[port].acl_priv);
+ dev->ports[port].acl_priv = NULL;
+
+ return ret;
+}
+
+/**
+ * ksz9477_port_acl_free - Free the ACL resources for a specified port on a ksz
+ * device.
+ * @dev: The ksz_device instance.
+ * @port: The port number to initialize the ACL for.
+ *
+ * This disables the ACL for the specified port and frees the associated memory,
+ */
+void ksz9477_port_acl_free(struct ksz_device *dev, int port)
+{
+ if (!dev->ports[port].acl_priv)
+ return;
+
+ ksz9477_acl_port_disable(dev, port);
+
+ kfree(dev->ports[port].acl_priv);
+ dev->ports[port].acl_priv = NULL;
+}
+
+/**
+ * ksz9477_acl_set_reg - Set entry[16] and entry[17] depending on the updated
+ * entry[]
+ * @entry: An array containing the entries
+ * @reg: The register of the entry that needs to be updated
+ * @value: The value to be assigned to the updated entry
+ *
+ * This function updates the entry[] array based on the provided register and
+ * value. It also sets entry[0x10] and entry[0x11] according to the ACL byte
+ * enable rules.
+ *
+ * 0x10 - Byte Enable [15:8]
+ *
+ * Each bit enables accessing one of the ACL bytes when a read or write is
+ * initiated by writing to the Port ACL Byte Enable LSB Register.
+ * Bit 0 applies to the Port ACL Access 7 Register
+ * Bit 1 applies to the Port ACL Access 6 Register, etc.
+ * Bit 7 applies to the Port ACL Access 0 Register
+ * 1 = Byte is selected for read/write
+ * 0 = Byte is not selected
+ *
+ * 0x11 - Byte Enable [7:0]
+ *
+ * Each bit enables accessing one of the ACL bytes when a read or write is
+ * initiated by writing to the Port ACL Byte Enable LSB Register.
+ * Bit 0 applies to the Port ACL Access F Register
+ * Bit 1 applies to the Port ACL Access E Register, etc.
+ * Bit 7 applies to the Port ACL Access 8 Register
+ * 1 = Byte is selected for read/write
+ * 0 = Byte is not selected
+ */
+static void ksz9477_acl_set_reg(u8 *entry, enum ksz9477_acl_port_access reg,
+ u8 value)
+{
+ if (reg >= KSZ9477_ACL_PORT_ACCESS_0 &&
+ reg <= KSZ9477_ACL_PORT_ACCESS_7) {
+ entry[KSZ9477_ACL_PORT_ACCESS_10] |=
+ BIT(KSZ9477_ACL_PORT_ACCESS_7 - reg);
+ } else if (reg >= KSZ9477_ACL_PORT_ACCESS_8 &&
+ reg <= KSZ9477_ACL_PORT_ACCESS_F) {
+ entry[KSZ9477_ACL_PORT_ACCESS_11] |=
+ BIT(KSZ9477_ACL_PORT_ACCESS_F - reg);
+ } else {
+ WARN_ON(1);
+ return;
+ }
+
+ entry[reg] = value;
+}
+
+/**
+ * ksz9477_acl_matching_rule_cfg_l2 - Configure an ACL filtering entry to match
+ * L2 types of Ethernet frames
+ * @entry: Pointer to ACL entry buffer
+ * @ethertype: Ethertype value
+ * @eth_addr: Pointer to Ethernet address
+ * @is_src: If true, match the source MAC address; if false, match the
+ * destination MAC address
+ *
+ * This function configures an Access Control List (ACL) filtering
+ * entry to match Layer 2 types of Ethernet frames based on the provided
+ * ethertype and Ethernet address. Additionally, it can match either the source
+ * or destination MAC address depending on the value of the is_src parameter.
+ *
+ * Register Descriptions for MD = 01 and ENB != 00 (Layer 2 MAC header
+ * filtering)
+ *
+ * 0x01 - Mode and Enable
+ * Bits 5:4 - MD (Mode)
+ * 01 = Layer 2 MAC header or counter filtering
+ * Bits 3:2 - ENB (Enable)
+ * 01 = Comparison is performed only on the TYPE value
+ * 10 = Comparison is performed only on the MAC Address value
+ * 11 = Both the MAC Address and TYPE are tested
+ * Bit 1 - S/D (Source / Destination)
+ * 0 = Destination address
+ * 1 = Source address
+ * Bit 0 - EQ (Equal / Not Equal)
+ * 0 = Not Equal produces true result
+ * 1 = Equal produces true result
+ *
+ * 0x02-0x07 - MAC Address
+ * 0x02 - MAC Address [47:40]
+ * 0x03 - MAC Address [39:32]
+ * 0x04 - MAC Address [31:24]
+ * 0x05 - MAC Address [23:16]
+ * 0x06 - MAC Address [15:8]
+ * 0x07 - MAC Address [7:0]
+ *
+ * 0x08-0x09 - EtherType
+ * 0x08 - EtherType [15:8]
+ * 0x09 - EtherType [7:0]
+ */
+static void ksz9477_acl_matching_rule_cfg_l2(u8 *entry, u16 ethertype,
+ u8 *eth_addr, bool is_src)
+{
+ u8 enb = 0;
+ u8 val;
+
+ if (ethertype)
+ enb |= KSZ9477_ACL_ENB_L2_TYPE;
+ if (eth_addr)
+ enb |= KSZ9477_ACL_ENB_L2_MAC;
+
+ val = FIELD_PREP(KSZ9477_ACL_MD_MASK, KSZ9477_ACL_MD_L2_MAC) |
+ FIELD_PREP(KSZ9477_ACL_ENB_MASK, enb) |
+ FIELD_PREP(KSZ9477_ACL_SD_SRC, is_src) | KSZ9477_ACL_EQ_EQUAL;
+ ksz9477_acl_set_reg(entry, KSZ9477_ACL_PORT_ACCESS_1, val);
+
+ if (eth_addr) {
+ int i;
+
+ for (i = 0; i < ETH_ALEN; i++) {
+ ksz9477_acl_set_reg(entry,
+ KSZ9477_ACL_PORT_ACCESS_2 + i,
+ eth_addr[i]);
+ }
+ }
+
+ ksz9477_acl_set_reg(entry, KSZ9477_ACL_PORT_ACCESS_8, ethertype >> 8);
+ ksz9477_acl_set_reg(entry, KSZ9477_ACL_PORT_ACCESS_9, ethertype & 0xff);
+}
+
+/**
+ * ksz9477_acl_action_rule_cfg - Set action for an ACL entry
+ * @entry: Pointer to the ACL entry
+ * @force_prio: If true, force the priority value
+ * @prio_val: Priority value
+ *
+ * This function sets the action for the specified ACL entry. It prepares
+ * the priority mode and traffic class values and updates the entry's
+ * action registers accordingly. Currently, there is no port or VLAN PCP
+ * remapping.
+ *
+ * ACL Action Rule Parameters for Non-Count Modes (MD ≠ 01 or ENB ≠ 00)
+ *
+ * 0x0A - PM, P, RPE, RP[2:1]
+ * Bits 7:6 - PM[1:0] - Priority Mode
+ * 00 = ACL does not specify the packet priority. Priority is
+ * determined by standard QoS functions.
+ * 01 = Change packet priority to P[2:0] if it is greater than QoS
+ * result.
+ * 10 = Change packet priority to P[2:0] if it is smaller than the
+ * QoS result.
+ * 11 = Always change packet priority to P[2:0].
+ * Bits 5:3 - P[2:0] - Priority value
+ * Bit 2 - RPE - Remark Priority Enable
+ * Bits 1:0 - RP[2:1] - Remarked Priority value (bits 2:1)
+ * 0 = Disable priority remarking
+ * 1 = Enable priority remarking. VLAN tag priority (PCP) bits are
+ * replaced by RP[2:0].
+ *
+ * 0x0B - RP[0], MM
+ * Bit 7 - RP[0] - Remarked Priority value (bit 0)
+ * Bits 6:5 - MM[1:0] - Map Mode
+ * 00 = No forwarding remapping
+ * 01 = The forwarding map in FORWARD is OR'ed with the forwarding
+ * map from the Address Lookup Table.
+ * 10 = The forwarding map in FORWARD is AND'ed with the forwarding
+ * map from the Address Lookup Table.
+ * 11 = The forwarding map in FORWARD replaces the forwarding map
+ * from the Address Lookup Table.
+ * 0x0D - FORWARD[n:0]
+ * Bits 7:0 - FORWARD[n:0] - Forwarding map. Bit 0 = port 1,
+ * bit 1 = port 2, etc.
+ * 1 = enable forwarding to this port
+ * 0 = do not forward to this port
+ */
+void ksz9477_acl_action_rule_cfg(u8 *entry, bool force_prio, u8 prio_val)
+{
+ u8 prio_mode, val;
+
+ if (force_prio)
+ prio_mode = KSZ9477_ACL_PM_REPLACE;
+ else
+ prio_mode = KSZ9477_ACL_PM_DISABLE;
+
+ val = FIELD_PREP(KSZ9477_ACL_PM_M, prio_mode) |
+ FIELD_PREP(KSZ9477_ACL_P_M, prio_val);
+ ksz9477_acl_set_reg(entry, KSZ9477_ACL_PORT_ACCESS_A, val);
+
+ /* no port or VLAN PCP remapping for now */
+ ksz9477_acl_set_reg(entry, KSZ9477_ACL_PORT_ACCESS_B, 0);
+ ksz9477_acl_set_reg(entry, KSZ9477_ACL_PORT_ACCESS_D, 0);
+}
+
+/**
+ * ksz9477_acl_processing_rule_set_action - Set the action for the processing
+ * rule set.
+ * @entry: Pointer to the ACL entry
+ * @action_idx: Index of the action to be applied
+ *
+ * This function sets the action for the processing rule set by updating the
+ * appropriate register in the entry. There can be only one action per
+ * processing rule.
+ *
+ * Access Control List (ACL) Processing Rule Registers:
+ *
+ * 0x00 - First Rule Number (FRN)
+ * Bits 3:0 - First Rule Number. Pointer to an Action rule entry.
+ */
+void ksz9477_acl_processing_rule_set_action(u8 *entry, u8 action_idx)
+{
+ ksz9477_acl_set_reg(entry, KSZ9477_ACL_PORT_ACCESS_0, action_idx);
+}
+
+/**
+ * ksz9477_acl_processing_rule_add_match - Add a matching rule to the rule set
+ * @entry: Pointer to the ACL entry
+ * @match_idx: Index of the matching rule to be added
+ *
+ * This function adds a matching rule to the rule set by updating the
+ * appropriate bits in the entry's rule set registers.
+ *
+ * Access Control List (ACL) Processing Rule Registers:
+ *
+ * 0x0E - RuleSet [15:8]
+ * Bits 7:0 - RuleSet [15:8] Specifies a set of one or more Matching rule
+ * entries. RuleSet has one bit for each of the 16 Matching rule entries.
+ * If multiple Matching rules are selected, then all conditions will be
+ * AND'ed to produce a final match result.
+ * 0 = Matching rule not selected
+ * 1 = Matching rule selected
+ *
+ * 0x0F - RuleSet [7:0]
+ * Bits 7:0 - RuleSet [7:0]
+ */
+static void ksz9477_acl_processing_rule_add_match(u8 *entry, u8 match_idx)
+{
+ u8 vale = entry[KSZ9477_ACL_PORT_ACCESS_E];
+ u8 valf = entry[KSZ9477_ACL_PORT_ACCESS_F];
+
+ if (match_idx < 8)
+ valf |= BIT(match_idx);
+ else
+ vale |= BIT(match_idx - 8);
+
+ ksz9477_acl_set_reg(entry, KSZ9477_ACL_PORT_ACCESS_E, vale);
+ ksz9477_acl_set_reg(entry, KSZ9477_ACL_PORT_ACCESS_F, valf);
+}
+
+/**
+ * ksz9477_acl_get_init_entry - Get a new uninitialized entry for a specified
+ * port on a ksz_device.
+ * @dev: The ksz_device instance.
+ * @port: The port number to get the uninitialized entry for.
+ * @cookie: The cookie to associate with the entry.
+ * @prio: The priority to associate with the entry.
+ *
+ * This function retrieves the next available ACL entry for the specified port,
+ * clears all access flags, and associates it with the current cookie.
+ *
+ * Returns: A pointer to the new uninitialized ACL entry.
+ */
+static struct ksz9477_acl_entry *
+ksz9477_acl_get_init_entry(struct ksz_device *dev, int port,
+ unsigned long cookie, u32 prio)
+{
+ struct ksz9477_acl_priv *acl = dev->ports[port].acl_priv;
+ struct ksz9477_acl_entries *acles = &acl->acles;
+ struct ksz9477_acl_entry *entry;
+
+ entry = &acles->entries[acles->entries_count];
+ entry->cookie = cookie;
+ entry->prio = prio;
+
+ /* clear all access flags */
+ entry->entry[KSZ9477_ACL_PORT_ACCESS_10] = 0;
+ entry->entry[KSZ9477_ACL_PORT_ACCESS_11] = 0;
+
+ return entry;
+}
+
+/**
+ * ksz9477_acl_match_process_l2 - Configure Layer 2 ACL matching rules and
+ * processing rules.
+ * @dev: Pointer to the ksz_device.
+ * @port: Port number.
+ * @ethtype: Ethernet type.
+ * @src_mac: Source MAC address.
+ * @dst_mac: Destination MAC address.
+ * @cookie: The cookie to associate with the entry.
+ * @prio: The priority of the entry.
+ *
+ * This function sets up matching and processing rules for Layer 2 ACLs.
+ * It takes into account that only one MAC per entry is supported.
+ */
+void ksz9477_acl_match_process_l2(struct ksz_device *dev, int port,
+ u16 ethtype, u8 *src_mac, u8 *dst_mac,
+ unsigned long cookie, u32 prio)
+{
+ struct ksz9477_acl_priv *acl = dev->ports[port].acl_priv;
+ struct ksz9477_acl_entries *acles = &acl->acles;
+ struct ksz9477_acl_entry *entry;
+
+ entry = ksz9477_acl_get_init_entry(dev, port, cookie, prio);
+
+ /* ACL supports only one MAC per entry */
+ if (src_mac && dst_mac) {
+ ksz9477_acl_matching_rule_cfg_l2(entry->entry, ethtype, src_mac,
+ true);
+
+ /* Add both match entries to first processing rule */
+ ksz9477_acl_processing_rule_add_match(entry->entry,
+ acles->entries_count);
+ acles->entries_count++;
+ ksz9477_acl_processing_rule_add_match(entry->entry,
+ acles->entries_count);
+
+ entry = ksz9477_acl_get_init_entry(dev, port, cookie, prio);
+ ksz9477_acl_matching_rule_cfg_l2(entry->entry, 0, dst_mac,
+ false);
+ acles->entries_count++;
+ } else {
+ u8 *mac = src_mac ? src_mac : dst_mac;
+ bool is_src = src_mac ? true : false;
+
+ ksz9477_acl_matching_rule_cfg_l2(entry->entry, ethtype, mac,
+ is_src);
+ ksz9477_acl_processing_rule_add_match(entry->entry,
+ acles->entries_count);
+ acles->entries_count++;
+ }
+}
diff --git a/drivers/net/dsa/microchip/ksz9477_i2c.c b/drivers/net/dsa/microchip/ksz9477_i2c.c
index 2710afad4f..cac4a607e5 100644
--- a/drivers/net/dsa/microchip/ksz9477_i2c.c
+++ b/drivers/net/dsa/microchip/ksz9477_i2c.c
@@ -66,10 +66,7 @@ static void ksz9477_i2c_shutdown(struct i2c_client *i2c)
if (!dev)
return;
- if (dev->dev_ops->reset)
- dev->dev_ops->reset(dev);
-
- dsa_switch_shutdown(dev->ds);
+ ksz_switch_shutdown(dev);
i2c_set_clientdata(i2c, NULL);
}
diff --git a/drivers/net/dsa/microchip/ksz9477_reg.h b/drivers/net/dsa/microchip/ksz9477_reg.h
index cba3dba58b..f3a205ee48 100644
--- a/drivers/net/dsa/microchip/ksz9477_reg.h
+++ b/drivers/net/dsa/microchip/ksz9477_reg.h
@@ -112,19 +112,6 @@
#define REG_SW_IBA_SYNC__1 0x010C
-#define REG_SW_IO_STRENGTH__1 0x010D
-#define SW_DRIVE_STRENGTH_M 0x7
-#define SW_DRIVE_STRENGTH_2MA 0
-#define SW_DRIVE_STRENGTH_4MA 1
-#define SW_DRIVE_STRENGTH_8MA 2
-#define SW_DRIVE_STRENGTH_12MA 3
-#define SW_DRIVE_STRENGTH_16MA 4
-#define SW_DRIVE_STRENGTH_20MA 5
-#define SW_DRIVE_STRENGTH_24MA 6
-#define SW_DRIVE_STRENGTH_28MA 7
-#define SW_HI_SPEED_DRIVE_STRENGTH_S 4
-#define SW_LO_SPEED_DRIVE_STRENGTH_S 0
-
#define REG_SW_IBA_STATUS__4 0x0110
#define SW_IBA_REQ BIT(31)
@@ -166,13 +153,6 @@
#define SW_DOUBLE_TAG BIT(7)
#define SW_RESET BIT(1)
-#define REG_SW_MAC_ADDR_0 0x0302
-#define REG_SW_MAC_ADDR_1 0x0303
-#define REG_SW_MAC_ADDR_2 0x0304
-#define REG_SW_MAC_ADDR_3 0x0305
-#define REG_SW_MAC_ADDR_4 0x0306
-#define REG_SW_MAC_ADDR_5 0x0307
-
#define REG_SW_MTU__2 0x0308
#define REG_SW_MTU_MASK GENMASK(13, 0)
diff --git a/drivers/net/dsa/microchip/ksz9477_tc_flower.c b/drivers/net/dsa/microchip/ksz9477_tc_flower.c
new file mode 100644
index 0000000000..8b2f5be667
--- /dev/null
+++ b/drivers/net/dsa/microchip/ksz9477_tc_flower.c
@@ -0,0 +1,281 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2023 Pengutronix, Oleksij Rempel <kernel@pengutronix.de>
+
+#include "ksz9477.h"
+#include "ksz9477_reg.h"
+#include "ksz_common.h"
+
+#define ETHER_TYPE_FULL_MASK cpu_to_be16(~0)
+#define KSZ9477_MAX_TC 7
+
+/**
+ * ksz9477_flower_parse_key_l2 - Parse Layer 2 key from flow rule and configure
+ * ACL entries accordingly.
+ * @dev: Pointer to the ksz_device.
+ * @port: Port number.
+ * @extack: Pointer to the netlink_ext_ack.
+ * @rule: Pointer to the flow_rule.
+ * @cookie: The cookie to associate with the entry.
+ * @prio: The priority of the entry.
+ *
+ * This function parses the Layer 2 key from the flow rule and configures
+ * the corresponding ACL entries. It checks for unsupported offloads and
+ * available entries before proceeding with the configuration.
+ *
+ * Returns: 0 on success or a negative error code on failure.
+ */
+static int ksz9477_flower_parse_key_l2(struct ksz_device *dev, int port,
+ struct netlink_ext_ack *extack,
+ struct flow_rule *rule,
+ unsigned long cookie, u32 prio)
+{
+ struct ksz9477_acl_priv *acl = dev->ports[port].acl_priv;
+ struct flow_match_eth_addrs ematch;
+ struct ksz9477_acl_entries *acles;
+ int required_entries;
+ u8 *src_mac = NULL;
+ u8 *dst_mac = NULL;
+ u16 ethtype = 0;
+
+ if (flow_rule_match_key(rule, FLOW_DISSECTOR_KEY_BASIC)) {
+ struct flow_match_basic match;
+
+ flow_rule_match_basic(rule, &match);
+
+ if (match.key->n_proto) {
+ if (match.mask->n_proto != ETHER_TYPE_FULL_MASK) {
+ NL_SET_ERR_MSG_MOD(extack,
+ "ethernet type mask must be a full mask");
+ return -EINVAL;
+ }
+
+ ethtype = be16_to_cpu(match.key->n_proto);
+ }
+ }
+
+ if (flow_rule_match_key(rule, FLOW_DISSECTOR_KEY_ETH_ADDRS)) {
+ flow_rule_match_eth_addrs(rule, &ematch);
+
+ if (!is_zero_ether_addr(ematch.key->src)) {
+ if (!is_broadcast_ether_addr(ematch.mask->src))
+ goto not_full_mask_err;
+
+ src_mac = ematch.key->src;
+ }
+
+ if (!is_zero_ether_addr(ematch.key->dst)) {
+ if (!is_broadcast_ether_addr(ematch.mask->dst))
+ goto not_full_mask_err;
+
+ dst_mac = ematch.key->dst;
+ }
+ }
+
+ acles = &acl->acles;
+ /* ACL supports only one MAC per entry */
+ required_entries = src_mac && dst_mac ? 2 : 1;
+
+ /* Check if there are enough available entries */
+ if (acles->entries_count + required_entries > KSZ9477_ACL_MAX_ENTRIES) {
+ NL_SET_ERR_MSG_MOD(extack, "ACL entry limit reached");
+ return -EOPNOTSUPP;
+ }
+
+ ksz9477_acl_match_process_l2(dev, port, ethtype, src_mac, dst_mac,
+ cookie, prio);
+
+ return 0;
+
+not_full_mask_err:
+ NL_SET_ERR_MSG_MOD(extack, "MAC address mask must be a full mask");
+ return -EOPNOTSUPP;
+}
+
+/**
+ * ksz9477_flower_parse_key - Parse flow rule keys for a specified port on a
+ * ksz_device.
+ * @dev: The ksz_device instance.
+ * @port: The port number to parse the flow rule keys for.
+ * @extack: The netlink extended ACK for reporting errors.
+ * @rule: The flow_rule to parse.
+ * @cookie: The cookie to associate with the entry.
+ * @prio: The priority of the entry.
+ *
+ * This function checks if the used keys in the flow rule are supported by
+ * the device and parses the L2 keys if they match. If unsupported keys are
+ * used, an error message is set in the extended ACK.
+ *
+ * Returns: 0 on success or a negative error code on failure.
+ */
+static int ksz9477_flower_parse_key(struct ksz_device *dev, int port,
+ struct netlink_ext_ack *extack,
+ struct flow_rule *rule,
+ unsigned long cookie, u32 prio)
+{
+ struct flow_dissector *dissector = rule->match.dissector;
+ int ret;
+
+ if (dissector->used_keys &
+ ~(BIT_ULL(FLOW_DISSECTOR_KEY_BASIC) |
+ BIT_ULL(FLOW_DISSECTOR_KEY_ETH_ADDRS) |
+ BIT_ULL(FLOW_DISSECTOR_KEY_CONTROL))) {
+ NL_SET_ERR_MSG_MOD(extack,
+ "Unsupported keys used");
+ return -EOPNOTSUPP;
+ }
+
+ if (flow_rule_match_key(rule, FLOW_DISSECTOR_KEY_BASIC) ||
+ flow_rule_match_key(rule, FLOW_DISSECTOR_KEY_ETH_ADDRS)) {
+ ret = ksz9477_flower_parse_key_l2(dev, port, extack, rule,
+ cookie, prio);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+
+/**
+ * ksz9477_flower_parse_action - Parse flow rule actions for a specified port
+ * on a ksz_device.
+ * @dev: The ksz_device instance.
+ * @port: The port number to parse the flow rule actions for.
+ * @extack: The netlink extended ACK for reporting errors.
+ * @cls: The flow_cls_offload instance containing the flow rule.
+ * @entry_idx: The index of the ACL entry to store the action.
+ *
+ * This function checks if the actions in the flow rule are supported by
+ * the device. Currently, only actions that change priorities are supported.
+ * If unsupported actions are encountered, an error message is set in the
+ * extended ACK.
+ *
+ * Returns: 0 on success or a negative error code on failure.
+ */
+static int ksz9477_flower_parse_action(struct ksz_device *dev, int port,
+ struct netlink_ext_ack *extack,
+ struct flow_cls_offload *cls,
+ int entry_idx)
+{
+ struct flow_rule *rule = flow_cls_offload_flow_rule(cls);
+ struct ksz9477_acl_priv *acl = dev->ports[port].acl_priv;
+ const struct flow_action_entry *act;
+ struct ksz9477_acl_entry *entry;
+ bool prio_force = false;
+ u8 prio_val = 0;
+ int i;
+
+ if (TC_H_MIN(cls->classid)) {
+ NL_SET_ERR_MSG_MOD(extack, "hw_tc is not supported. Use: action skbedit prio");
+ return -EOPNOTSUPP;
+ }
+
+ flow_action_for_each(i, act, &rule->action) {
+ switch (act->id) {
+ case FLOW_ACTION_PRIORITY:
+ if (act->priority > KSZ9477_MAX_TC) {
+ NL_SET_ERR_MSG_MOD(extack, "Priority value is too high");
+ return -EOPNOTSUPP;
+ }
+ prio_force = true;
+ prio_val = act->priority;
+ break;
+ default:
+ NL_SET_ERR_MSG_MOD(extack, "action not supported");
+ return -EOPNOTSUPP;
+ }
+ }
+
+ /* pick entry to store action */
+ entry = &acl->acles.entries[entry_idx];
+
+ ksz9477_acl_action_rule_cfg(entry->entry, prio_force, prio_val);
+ ksz9477_acl_processing_rule_set_action(entry->entry, entry_idx);
+
+ return 0;
+}
+
+/**
+ * ksz9477_cls_flower_add - Add a flow classification rule for a specified port
+ * on a ksz_device.
+ * @ds: The DSA switch instance.
+ * @port: The port number to add the flow classification rule to.
+ * @cls: The flow_cls_offload instance containing the flow rule.
+ * @ingress: A flag indicating if the rule is applied on the ingress path.
+ *
+ * This function adds a flow classification rule for a specified port on a
+ * ksz_device. It checks if the ACL offloading is supported and parses the flow
+ * keys and actions. If the ACL is not supported, it returns an error. If there
+ * are unprocessed entries, it parses the action for the rule.
+ *
+ * Returns: 0 on success or a negative error code on failure.
+ */
+int ksz9477_cls_flower_add(struct dsa_switch *ds, int port,
+ struct flow_cls_offload *cls, bool ingress)
+{
+ struct flow_rule *rule = flow_cls_offload_flow_rule(cls);
+ struct netlink_ext_ack *extack = cls->common.extack;
+ struct ksz_device *dev = ds->priv;
+ struct ksz9477_acl_priv *acl;
+ int action_entry_idx;
+ int ret;
+
+ acl = dev->ports[port].acl_priv;
+
+ if (!acl) {
+ NL_SET_ERR_MSG_MOD(extack, "ACL offloading is not supported");
+ return -EOPNOTSUPP;
+ }
+
+ /* A complex rule set can take multiple entries. Use first entry
+ * to store the action.
+ */
+ action_entry_idx = acl->acles.entries_count;
+
+ ret = ksz9477_flower_parse_key(dev, port, extack, rule, cls->cookie,
+ cls->common.prio);
+ if (ret)
+ return ret;
+
+ ret = ksz9477_flower_parse_action(dev, port, extack, cls,
+ action_entry_idx);
+ if (ret)
+ return ret;
+
+ ret = ksz9477_sort_acl_entries(dev, port);
+ if (ret)
+ return ret;
+
+ return ksz9477_acl_write_list(dev, port);
+}
+
+/**
+ * ksz9477_cls_flower_del - Remove a flow classification rule for a specified
+ * port on a ksz_device.
+ * @ds: The DSA switch instance.
+ * @port: The port number to remove the flow classification rule from.
+ * @cls: The flow_cls_offload instance containing the flow rule.
+ * @ingress: A flag indicating if the rule is applied on the ingress path.
+ *
+ * This function removes a flow classification rule for a specified port on a
+ * ksz_device. It checks if the ACL is initialized, and if not, returns an
+ * error. If the ACL is initialized, it removes entries with the specified
+ * cookie and rewrites the ACL list.
+ *
+ * Returns: 0 on success or a negative error code on failure.
+ */
+int ksz9477_cls_flower_del(struct dsa_switch *ds, int port,
+ struct flow_cls_offload *cls, bool ingress)
+{
+ unsigned long cookie = cls->cookie;
+ struct ksz_device *dev = ds->priv;
+ struct ksz9477_acl_priv *acl;
+
+ acl = dev->ports[port].acl_priv;
+
+ if (!acl)
+ return -EOPNOTSUPP;
+
+ ksz9477_acl_remove_entries(dev, port, &acl->acles, cookie);
+
+ return ksz9477_acl_write_list(dev, port);
+}
diff --git a/drivers/net/dsa/microchip/ksz_common.c b/drivers/net/dsa/microchip/ksz_common.c
index 286e20f340..ff4b39601c 100644
--- a/drivers/net/dsa/microchip/ksz_common.c
+++ b/drivers/net/dsa/microchip/ksz_common.c
@@ -16,6 +16,7 @@
#include <linux/etherdevice.h>
#include <linux/if_bridge.h>
#include <linux/if_vlan.h>
+#include <linux/if_hsr.h>
#include <linux/irq.h>
#include <linux/irqdomain.h>
#include <linux/of.h>
@@ -186,6 +187,72 @@ static const struct ksz_mib_names ksz9477_mib_names[] = {
{ 0x83, "tx_discards" },
};
+struct ksz_driver_strength_prop {
+ const char *name;
+ int offset;
+ int value;
+};
+
+enum ksz_driver_strength_type {
+ KSZ_DRIVER_STRENGTH_HI,
+ KSZ_DRIVER_STRENGTH_LO,
+ KSZ_DRIVER_STRENGTH_IO,
+};
+
+/**
+ * struct ksz_drive_strength - drive strength mapping
+ * @reg_val: register value
+ * @microamp: microamp value
+ */
+struct ksz_drive_strength {
+ u32 reg_val;
+ u32 microamp;
+};
+
+/* ksz9477_drive_strengths - Drive strength mapping for KSZ9477 variants
+ *
+ * This values are not documented in KSZ9477 variants but confirmed by
+ * Microchip that KSZ9477, KSZ9567, KSZ8567, KSZ9897, KSZ9896, KSZ9563, KSZ9893
+ * and KSZ8563 are using same register (drive strength) settings like KSZ8795.
+ *
+ * Documentation in KSZ8795CLX provides more information with some
+ * recommendations:
+ * - for high speed signals
+ * 1. 4 mA or 8 mA is often used for MII, RMII, and SPI interface with using
+ * 2.5V or 3.3V VDDIO.
+ * 2. 12 mA or 16 mA is often used for MII, RMII, and SPI interface with
+ * using 1.8V VDDIO.
+ * 3. 20 mA or 24 mA is often used for GMII/RGMII interface with using 2.5V
+ * or 3.3V VDDIO.
+ * 4. 28 mA is often used for GMII/RGMII interface with using 1.8V VDDIO.
+ * 5. In same interface, the heavy loading should use higher one of the
+ * drive current strength.
+ * - for low speed signals
+ * 1. 3.3V VDDIO, use either 4 mA or 8 mA.
+ * 2. 2.5V VDDIO, use either 8 mA or 12 mA.
+ * 3. 1.8V VDDIO, use either 12 mA or 16 mA.
+ * 4. If it is heavy loading, can use higher drive current strength.
+ */
+static const struct ksz_drive_strength ksz9477_drive_strengths[] = {
+ { SW_DRIVE_STRENGTH_2MA, 2000 },
+ { SW_DRIVE_STRENGTH_4MA, 4000 },
+ { SW_DRIVE_STRENGTH_8MA, 8000 },
+ { SW_DRIVE_STRENGTH_12MA, 12000 },
+ { SW_DRIVE_STRENGTH_16MA, 16000 },
+ { SW_DRIVE_STRENGTH_20MA, 20000 },
+ { SW_DRIVE_STRENGTH_24MA, 24000 },
+ { SW_DRIVE_STRENGTH_28MA, 28000 },
+};
+
+/* ksz8830_drive_strengths - Drive strength mapping for KSZ8830, KSZ8873, ..
+ * variants.
+ * This values are documented in KSZ8873 and KSZ8863 datasheets.
+ */
+static const struct ksz_drive_strength ksz8830_drive_strengths[] = {
+ { 0, 8000 },
+ { KSZ8873_DRIVE_STRENGTH_16MA, 16000 },
+};
+
static const struct ksz_dev_ops ksz8_dev_ops = {
.setup = ksz8_setup,
.get_port_addr = ksz8_get_port_addr,
@@ -252,6 +319,9 @@ static const struct ksz_dev_ops ksz9477_dev_ops = {
.mdb_del = ksz9477_mdb_del,
.change_mtu = ksz9477_change_mtu,
.phylink_mac_link_up = ksz9477_phylink_mac_link_up,
+ .get_wol = ksz9477_get_wol,
+ .set_wol = ksz9477_set_wol,
+ .wol_pre_shutdown = ksz9477_wol_pre_shutdown,
.config_cpu_port = ksz9477_config_cpu_port,
.tc_cbs_set_cinc = ksz9477_tc_cbs_set_cinc,
.enable_stp_addr = ksz9477_enable_stp_addr,
@@ -298,6 +368,7 @@ static const struct ksz_dev_ops lan937x_dev_ops = {
};
static const u16 ksz8795_regs[] = {
+ [REG_SW_MAC_ADDR] = 0x68,
[REG_IND_CTRL_0] = 0x6E,
[REG_IND_DATA_8] = 0x70,
[REG_IND_DATA_CHECK] = 0x72,
@@ -373,6 +444,7 @@ static const u8 ksz8795_shifts[] = {
};
static const u16 ksz8863_regs[] = {
+ [REG_SW_MAC_ADDR] = 0x70,
[REG_IND_CTRL_0] = 0x79,
[REG_IND_DATA_8] = 0x7B,
[REG_IND_DATA_CHECK] = 0x7B,
@@ -426,6 +498,7 @@ static u8 ksz8863_shifts[] = {
};
static const u16 ksz9477_regs[] = {
+ [REG_SW_MAC_ADDR] = 0x0302,
[P_STP_CTRL] = 0x0B04,
[S_START_CTRL] = 0x0300,
[S_BROADCAST_CTRL] = 0x0332,
@@ -1876,14 +1949,14 @@ static int ksz_irq_phy_setup(struct ksz_device *dev)
ret = irq;
goto out;
}
- ds->slave_mii_bus->irq[phy] = irq;
+ ds->user_mii_bus->irq[phy] = irq;
}
}
return 0;
out:
while (phy--)
if (BIT(phy) & ds->phys_mii_mask)
- irq_dispose_mapping(ds->slave_mii_bus->irq[phy]);
+ irq_dispose_mapping(ds->user_mii_bus->irq[phy]);
return ret;
}
@@ -1895,7 +1968,7 @@ static void ksz_irq_phy_free(struct ksz_device *dev)
for (phy = 0; phy < KSZ_MAX_NUM_PORTS; phy++)
if (BIT(phy) & ds->phys_mii_mask)
- irq_dispose_mapping(ds->slave_mii_bus->irq[phy]);
+ irq_dispose_mapping(ds->user_mii_bus->irq[phy]);
}
static int ksz_mdio_register(struct ksz_device *dev)
@@ -1918,12 +1991,12 @@ static int ksz_mdio_register(struct ksz_device *dev)
bus->priv = dev;
bus->read = ksz_sw_mdio_read;
bus->write = ksz_sw_mdio_write;
- bus->name = "ksz slave smi";
+ bus->name = "ksz user smi";
snprintf(bus->id, MII_BUS_ID_SIZE, "SMI-%d", ds->index);
bus->parent = ds->dev;
bus->phy_mask = ~ds->phys_mii_mask;
- ds->slave_mii_bus = bus;
+ ds->user_mii_bus = bus;
if (dev->irq > 0) {
ret = ksz_irq_phy_setup(dev);
@@ -2275,7 +2348,7 @@ static void ksz_mib_read_work(struct work_struct *work)
if (!p->read) {
const struct dsa_port *dp = dsa_to_port(dev->ds, i);
- if (!netif_carrier_ok(dp->slave))
+ if (!netif_carrier_ok(dp->user))
mib->cnt_ptr = dev->info->reg_mib_cnt;
}
port_r_cnt(dev, i);
@@ -2395,7 +2468,7 @@ static void ksz_get_ethtool_stats(struct dsa_switch *ds, int port,
mutex_lock(&mib->cnt_mutex);
/* Only read dropped counters if no link. */
- if (!netif_carrier_ok(dp->slave))
+ if (!netif_carrier_ok(dp->user))
mib->cnt_ptr = dev->info->reg_mib_cnt;
port_r_cnt(dev, port);
memcpy(buf, mib->counters, dev->info->mib_cnt * sizeof(u64));
@@ -2498,15 +2571,14 @@ static int ksz_port_mdb_del(struct dsa_switch *ds, int port,
return dev->dev_ops->mdb_del(dev, port, mdb, db);
}
-static int ksz_enable_port(struct dsa_switch *ds, int port,
- struct phy_device *phy)
+static int ksz_port_setup(struct dsa_switch *ds, int port)
{
struct ksz_device *dev = ds->priv;
if (!dsa_is_user_port(ds, port))
return 0;
- /* setup slave port */
+ /* setup user port */
dev->dev_ops->port_setup(dev, port, false);
/* port_stp_state_set() will be called after to enable the port so
@@ -2562,6 +2634,23 @@ void ksz_port_stp_state_set(struct dsa_switch *ds, int port, u8 state)
ksz_update_port_member(dev, port);
}
+static void ksz_port_teardown(struct dsa_switch *ds, int port)
+{
+ struct ksz_device *dev = ds->priv;
+
+ switch (dev->chip_id) {
+ case KSZ8563_CHIP_ID:
+ case KSZ9477_CHIP_ID:
+ case KSZ9563_CHIP_ID:
+ case KSZ9567_CHIP_ID:
+ case KSZ9893_CHIP_ID:
+ case KSZ9896_CHIP_ID:
+ case KSZ9897_CHIP_ID:
+ if (dsa_is_user_port(ds, port))
+ ksz9477_port_acl_free(dev, port);
+ }
+}
+
static int ksz_port_pre_bridge_flags(struct dsa_switch *ds, int port,
struct switchdev_brport_flags flags,
struct netlink_ext_ack *extack)
@@ -3115,6 +3204,44 @@ static int ksz_switch_detect(struct ksz_device *dev)
return 0;
}
+static int ksz_cls_flower_add(struct dsa_switch *ds, int port,
+ struct flow_cls_offload *cls, bool ingress)
+{
+ struct ksz_device *dev = ds->priv;
+
+ switch (dev->chip_id) {
+ case KSZ8563_CHIP_ID:
+ case KSZ9477_CHIP_ID:
+ case KSZ9563_CHIP_ID:
+ case KSZ9567_CHIP_ID:
+ case KSZ9893_CHIP_ID:
+ case KSZ9896_CHIP_ID:
+ case KSZ9897_CHIP_ID:
+ return ksz9477_cls_flower_add(ds, port, cls, ingress);
+ }
+
+ return -EOPNOTSUPP;
+}
+
+static int ksz_cls_flower_del(struct dsa_switch *ds, int port,
+ struct flow_cls_offload *cls, bool ingress)
+{
+ struct ksz_device *dev = ds->priv;
+
+ switch (dev->chip_id) {
+ case KSZ8563_CHIP_ID:
+ case KSZ9477_CHIP_ID:
+ case KSZ9563_CHIP_ID:
+ case KSZ9567_CHIP_ID:
+ case KSZ9893_CHIP_ID:
+ case KSZ9896_CHIP_ID:
+ case KSZ9897_CHIP_ID:
+ return ksz9477_cls_flower_del(ds, port, cls, ingress);
+ }
+
+ return -EOPNOTSUPP;
+}
+
/* Bandwidth is calculated by idle slope/transmission speed. Then the Bandwidth
* is converted to Hex-decimal using the successive multiplication method. On
* every step, integer part is taken and decimal part is carry forwarded.
@@ -3427,6 +3554,224 @@ static int ksz_setup_tc(struct dsa_switch *ds, int port,
}
}
+static void ksz_get_wol(struct dsa_switch *ds, int port,
+ struct ethtool_wolinfo *wol)
+{
+ struct ksz_device *dev = ds->priv;
+
+ if (dev->dev_ops->get_wol)
+ dev->dev_ops->get_wol(dev, port, wol);
+}
+
+static int ksz_set_wol(struct dsa_switch *ds, int port,
+ struct ethtool_wolinfo *wol)
+{
+ struct ksz_device *dev = ds->priv;
+
+ if (dev->dev_ops->set_wol)
+ return dev->dev_ops->set_wol(dev, port, wol);
+
+ return -EOPNOTSUPP;
+}
+
+static int ksz_port_set_mac_address(struct dsa_switch *ds, int port,
+ const unsigned char *addr)
+{
+ struct dsa_port *dp = dsa_to_port(ds, port);
+ struct ethtool_wolinfo wol;
+
+ if (dp->hsr_dev) {
+ dev_err(ds->dev,
+ "Cannot change MAC address on port %d with active HSR offload\n",
+ port);
+ return -EBUSY;
+ }
+
+ ksz_get_wol(ds, dp->index, &wol);
+ if (wol.wolopts & WAKE_MAGIC) {
+ dev_err(ds->dev,
+ "Cannot change MAC address on port %d with active Wake on Magic Packet\n",
+ port);
+ return -EBUSY;
+ }
+
+ return 0;
+}
+
+/**
+ * ksz_is_port_mac_global_usable - Check if the MAC address on a given port
+ * can be used as a global address.
+ * @ds: Pointer to the DSA switch structure.
+ * @port: The port number on which the MAC address is to be checked.
+ *
+ * This function examines the MAC address set on the specified port and
+ * determines if it can be used as a global address for the switch.
+ *
+ * Return: true if the port's MAC address can be used as a global address, false
+ * otherwise.
+ */
+bool ksz_is_port_mac_global_usable(struct dsa_switch *ds, int port)
+{
+ struct net_device *user = dsa_to_port(ds, port)->user;
+ const unsigned char *addr = user->dev_addr;
+ struct ksz_switch_macaddr *switch_macaddr;
+ struct ksz_device *dev = ds->priv;
+
+ ASSERT_RTNL();
+
+ switch_macaddr = dev->switch_macaddr;
+ if (switch_macaddr && !ether_addr_equal(switch_macaddr->addr, addr))
+ return false;
+
+ return true;
+}
+
+/**
+ * ksz_switch_macaddr_get - Program the switch's MAC address register.
+ * @ds: DSA switch instance.
+ * @port: Port number.
+ * @extack: Netlink extended acknowledgment.
+ *
+ * This function programs the switch's MAC address register with the MAC address
+ * of the requesting user port. This single address is used by the switch for
+ * multiple features like HSR self-address filtering and WoL. Other user ports
+ * can share ownership of this address as long as their MAC address is the same.
+ * The MAC addresses of user ports must not change while they have ownership of
+ * the switch MAC address.
+ *
+ * Return: 0 on success, or other error codes on failure.
+ */
+int ksz_switch_macaddr_get(struct dsa_switch *ds, int port,
+ struct netlink_ext_ack *extack)
+{
+ struct net_device *user = dsa_to_port(ds, port)->user;
+ const unsigned char *addr = user->dev_addr;
+ struct ksz_switch_macaddr *switch_macaddr;
+ struct ksz_device *dev = ds->priv;
+ const u16 *regs = dev->info->regs;
+ int i, ret;
+
+ /* Make sure concurrent MAC address changes are blocked */
+ ASSERT_RTNL();
+
+ switch_macaddr = dev->switch_macaddr;
+ if (switch_macaddr) {
+ if (!ether_addr_equal(switch_macaddr->addr, addr)) {
+ NL_SET_ERR_MSG_FMT_MOD(extack,
+ "Switch already configured for MAC address %pM",
+ switch_macaddr->addr);
+ return -EBUSY;
+ }
+
+ refcount_inc(&switch_macaddr->refcount);
+ return 0;
+ }
+
+ switch_macaddr = kzalloc(sizeof(*switch_macaddr), GFP_KERNEL);
+ if (!switch_macaddr)
+ return -ENOMEM;
+
+ ether_addr_copy(switch_macaddr->addr, addr);
+ refcount_set(&switch_macaddr->refcount, 1);
+ dev->switch_macaddr = switch_macaddr;
+
+ /* Program the switch MAC address to hardware */
+ for (i = 0; i < ETH_ALEN; i++) {
+ ret = ksz_write8(dev, regs[REG_SW_MAC_ADDR] + i, addr[i]);
+ if (ret)
+ goto macaddr_drop;
+ }
+
+ return 0;
+
+macaddr_drop:
+ dev->switch_macaddr = NULL;
+ refcount_set(&switch_macaddr->refcount, 0);
+ kfree(switch_macaddr);
+
+ return ret;
+}
+
+void ksz_switch_macaddr_put(struct dsa_switch *ds)
+{
+ struct ksz_switch_macaddr *switch_macaddr;
+ struct ksz_device *dev = ds->priv;
+ const u16 *regs = dev->info->regs;
+ int i;
+
+ /* Make sure concurrent MAC address changes are blocked */
+ ASSERT_RTNL();
+
+ switch_macaddr = dev->switch_macaddr;
+ if (!refcount_dec_and_test(&switch_macaddr->refcount))
+ return;
+
+ for (i = 0; i < ETH_ALEN; i++)
+ ksz_write8(dev, regs[REG_SW_MAC_ADDR] + i, 0);
+
+ dev->switch_macaddr = NULL;
+ kfree(switch_macaddr);
+}
+
+static int ksz_hsr_join(struct dsa_switch *ds, int port, struct net_device *hsr,
+ struct netlink_ext_ack *extack)
+{
+ struct ksz_device *dev = ds->priv;
+ enum hsr_version ver;
+ int ret;
+
+ ret = hsr_get_version(hsr, &ver);
+ if (ret)
+ return ret;
+
+ if (dev->chip_id != KSZ9477_CHIP_ID) {
+ NL_SET_ERR_MSG_MOD(extack, "Chip does not support HSR offload");
+ return -EOPNOTSUPP;
+ }
+
+ /* KSZ9477 can support HW offloading of only 1 HSR device */
+ if (dev->hsr_dev && hsr != dev->hsr_dev) {
+ NL_SET_ERR_MSG_MOD(extack, "Offload supported for a single HSR");
+ return -EOPNOTSUPP;
+ }
+
+ /* KSZ9477 only supports HSR v0 and v1 */
+ if (!(ver == HSR_V0 || ver == HSR_V1)) {
+ NL_SET_ERR_MSG_MOD(extack, "Only HSR v0 and v1 supported");
+ return -EOPNOTSUPP;
+ }
+
+ /* Self MAC address filtering, to avoid frames traversing
+ * the HSR ring more than once.
+ */
+ ret = ksz_switch_macaddr_get(ds, port, extack);
+ if (ret)
+ return ret;
+
+ ksz9477_hsr_join(ds, port, hsr);
+ dev->hsr_dev = hsr;
+ dev->hsr_ports |= BIT(port);
+
+ return 0;
+}
+
+static int ksz_hsr_leave(struct dsa_switch *ds, int port,
+ struct net_device *hsr)
+{
+ struct ksz_device *dev = ds->priv;
+
+ WARN_ON(dev->chip_id != KSZ9477_CHIP_ID);
+
+ ksz9477_hsr_leave(ds, port, hsr);
+ dev->hsr_ports &= ~BIT(port);
+ if (!dev->hsr_ports)
+ dev->hsr_dev = NULL;
+
+ ksz_switch_macaddr_put(ds);
+
+ return 0;
+}
+
static const struct dsa_switch_ops ksz_switch_ops = {
.get_tag_protocol = ksz_get_tag_protocol,
.connect_tag_protocol = ksz_connect_tag_protocol,
@@ -3439,14 +3784,18 @@ static const struct dsa_switch_ops ksz_switch_ops = {
.phylink_mac_config = ksz_phylink_mac_config,
.phylink_mac_link_up = ksz_phylink_mac_link_up,
.phylink_mac_link_down = ksz_mac_link_down,
- .port_enable = ksz_enable_port,
+ .port_setup = ksz_port_setup,
.set_ageing_time = ksz_set_ageing_time,
.get_strings = ksz_get_strings,
.get_ethtool_stats = ksz_get_ethtool_stats,
.get_sset_count = ksz_sset_count,
.port_bridge_join = ksz_port_bridge_join,
.port_bridge_leave = ksz_port_bridge_leave,
+ .port_hsr_join = ksz_hsr_join,
+ .port_hsr_leave = ksz_hsr_leave,
+ .port_set_mac_address = ksz_port_set_mac_address,
.port_stp_state_set = ksz_port_stp_state_set,
+ .port_teardown = ksz_port_teardown,
.port_pre_bridge_flags = ksz_port_pre_bridge_flags,
.port_bridge_flags = ksz_port_bridge_flags,
.port_fast_age = ksz_port_fast_age,
@@ -3464,11 +3813,15 @@ static const struct dsa_switch_ops ksz_switch_ops = {
.get_pause_stats = ksz_get_pause_stats,
.port_change_mtu = ksz_change_mtu,
.port_max_mtu = ksz_max_mtu,
+ .get_wol = ksz_get_wol,
+ .set_wol = ksz_set_wol,
.get_ts_info = ksz_get_ts_info,
.port_hwtstamp_get = ksz_hwtstamp_get,
.port_hwtstamp_set = ksz_hwtstamp_set,
.port_txtstamp = ksz_port_txtstamp,
.port_rxtstamp = ksz_port_rxtstamp,
+ .cls_flower_add = ksz_cls_flower_add,
+ .cls_flower_del = ksz_cls_flower_del,
.port_setup_tc = ksz_setup_tc,
.get_mac_eee = ksz_get_mac_eee,
.set_mac_eee = ksz_set_mac_eee,
@@ -3501,6 +3854,30 @@ struct ksz_device *ksz_switch_alloc(struct device *base, void *priv)
}
EXPORT_SYMBOL(ksz_switch_alloc);
+/**
+ * ksz_switch_shutdown - Shutdown routine for the switch device.
+ * @dev: The switch device structure.
+ *
+ * This function is responsible for initiating a shutdown sequence for the
+ * switch device. It invokes the reset operation defined in the device
+ * operations, if available, to reset the switch. Subsequently, it calls the
+ * DSA framework's shutdown function to ensure a proper shutdown of the DSA
+ * switch.
+ */
+void ksz_switch_shutdown(struct ksz_device *dev)
+{
+ bool wol_enabled = false;
+
+ if (dev->dev_ops->wol_pre_shutdown)
+ dev->dev_ops->wol_pre_shutdown(dev, &wol_enabled);
+
+ if (dev->dev_ops->reset && !wol_enabled)
+ dev->dev_ops->reset(dev);
+
+ dsa_switch_shutdown(dev->ds);
+}
+EXPORT_SYMBOL(ksz_switch_shutdown);
+
static void ksz_parse_rgmii_delay(struct ksz_device *dev, int port_num,
struct device_node *port_dn)
{
@@ -3538,6 +3915,245 @@ static void ksz_parse_rgmii_delay(struct ksz_device *dev, int port_num,
dev->ports[port_num].rgmii_tx_val = tx_delay;
}
+/**
+ * ksz_drive_strength_to_reg() - Convert drive strength value to corresponding
+ * register value.
+ * @array: The array of drive strength values to search.
+ * @array_size: The size of the array.
+ * @microamp: The drive strength value in microamp to be converted.
+ *
+ * This function searches the array of drive strength values for the given
+ * microamp value and returns the corresponding register value for that drive.
+ *
+ * Returns: If found, the corresponding register value for that drive strength
+ * is returned. Otherwise, -EINVAL is returned indicating an invalid value.
+ */
+static int ksz_drive_strength_to_reg(const struct ksz_drive_strength *array,
+ size_t array_size, int microamp)
+{
+ int i;
+
+ for (i = 0; i < array_size; i++) {
+ if (array[i].microamp == microamp)
+ return array[i].reg_val;
+ }
+
+ return -EINVAL;
+}
+
+/**
+ * ksz_drive_strength_error() - Report invalid drive strength value
+ * @dev: ksz device
+ * @array: The array of drive strength values to search.
+ * @array_size: The size of the array.
+ * @microamp: Invalid drive strength value in microamp
+ *
+ * This function logs an error message when an unsupported drive strength value
+ * is detected. It lists out all the supported drive strength values for
+ * reference in the error message.
+ */
+static void ksz_drive_strength_error(struct ksz_device *dev,
+ const struct ksz_drive_strength *array,
+ size_t array_size, int microamp)
+{
+ char supported_values[100];
+ size_t remaining_size;
+ int added_len;
+ char *ptr;
+ int i;
+
+ remaining_size = sizeof(supported_values);
+ ptr = supported_values;
+
+ for (i = 0; i < array_size; i++) {
+ added_len = snprintf(ptr, remaining_size,
+ i == 0 ? "%d" : ", %d", array[i].microamp);
+
+ if (added_len >= remaining_size)
+ break;
+
+ ptr += added_len;
+ remaining_size -= added_len;
+ }
+
+ dev_err(dev->dev, "Invalid drive strength %d, supported values are %s\n",
+ microamp, supported_values);
+}
+
+/**
+ * ksz9477_drive_strength_write() - Set the drive strength for specific KSZ9477
+ * chip variants.
+ * @dev: ksz device
+ * @props: Array of drive strength properties to be applied
+ * @num_props: Number of properties in the array
+ *
+ * This function configures the drive strength for various KSZ9477 chip variants
+ * based on the provided properties. It handles chip-specific nuances and
+ * ensures only valid drive strengths are written to the respective chip.
+ *
+ * Return: 0 on successful configuration, a negative error code on failure.
+ */
+static int ksz9477_drive_strength_write(struct ksz_device *dev,
+ struct ksz_driver_strength_prop *props,
+ int num_props)
+{
+ size_t array_size = ARRAY_SIZE(ksz9477_drive_strengths);
+ int i, ret, reg;
+ u8 mask = 0;
+ u8 val = 0;
+
+ if (props[KSZ_DRIVER_STRENGTH_IO].value != -1)
+ dev_warn(dev->dev, "%s is not supported by this chip variant\n",
+ props[KSZ_DRIVER_STRENGTH_IO].name);
+
+ if (dev->chip_id == KSZ8795_CHIP_ID ||
+ dev->chip_id == KSZ8794_CHIP_ID ||
+ dev->chip_id == KSZ8765_CHIP_ID)
+ reg = KSZ8795_REG_SW_CTRL_20;
+ else
+ reg = KSZ9477_REG_SW_IO_STRENGTH;
+
+ for (i = 0; i < num_props; i++) {
+ if (props[i].value == -1)
+ continue;
+
+ ret = ksz_drive_strength_to_reg(ksz9477_drive_strengths,
+ array_size, props[i].value);
+ if (ret < 0) {
+ ksz_drive_strength_error(dev, ksz9477_drive_strengths,
+ array_size, props[i].value);
+ return ret;
+ }
+
+ mask |= SW_DRIVE_STRENGTH_M << props[i].offset;
+ val |= ret << props[i].offset;
+ }
+
+ return ksz_rmw8(dev, reg, mask, val);
+}
+
+/**
+ * ksz8830_drive_strength_write() - Set the drive strength configuration for
+ * KSZ8830 compatible chip variants.
+ * @dev: ksz device
+ * @props: Array of drive strength properties to be set
+ * @num_props: Number of properties in the array
+ *
+ * This function applies the specified drive strength settings to KSZ8830 chip
+ * variants (KSZ8873, KSZ8863).
+ * It ensures the configurations align with what the chip variant supports and
+ * warns or errors out on unsupported settings.
+ *
+ * Return: 0 on success, error code otherwise
+ */
+static int ksz8830_drive_strength_write(struct ksz_device *dev,
+ struct ksz_driver_strength_prop *props,
+ int num_props)
+{
+ size_t array_size = ARRAY_SIZE(ksz8830_drive_strengths);
+ int microamp;
+ int i, ret;
+
+ for (i = 0; i < num_props; i++) {
+ if (props[i].value == -1 || i == KSZ_DRIVER_STRENGTH_IO)
+ continue;
+
+ dev_warn(dev->dev, "%s is not supported by this chip variant\n",
+ props[i].name);
+ }
+
+ microamp = props[KSZ_DRIVER_STRENGTH_IO].value;
+ ret = ksz_drive_strength_to_reg(ksz8830_drive_strengths, array_size,
+ microamp);
+ if (ret < 0) {
+ ksz_drive_strength_error(dev, ksz8830_drive_strengths,
+ array_size, microamp);
+ return ret;
+ }
+
+ return ksz_rmw8(dev, KSZ8873_REG_GLOBAL_CTRL_12,
+ KSZ8873_DRIVE_STRENGTH_16MA, ret);
+}
+
+/**
+ * ksz_parse_drive_strength() - Extract and apply drive strength configurations
+ * from device tree properties.
+ * @dev: ksz device
+ *
+ * This function reads the specified drive strength properties from the
+ * device tree, validates against the supported chip variants, and sets
+ * them accordingly. An error should be critical here, as the drive strength
+ * settings are crucial for EMI compliance.
+ *
+ * Return: 0 on success, error code otherwise
+ */
+static int ksz_parse_drive_strength(struct ksz_device *dev)
+{
+ struct ksz_driver_strength_prop of_props[] = {
+ [KSZ_DRIVER_STRENGTH_HI] = {
+ .name = "microchip,hi-drive-strength-microamp",
+ .offset = SW_HI_SPEED_DRIVE_STRENGTH_S,
+ .value = -1,
+ },
+ [KSZ_DRIVER_STRENGTH_LO] = {
+ .name = "microchip,lo-drive-strength-microamp",
+ .offset = SW_LO_SPEED_DRIVE_STRENGTH_S,
+ .value = -1,
+ },
+ [KSZ_DRIVER_STRENGTH_IO] = {
+ .name = "microchip,io-drive-strength-microamp",
+ .offset = 0, /* don't care */
+ .value = -1,
+ },
+ };
+ struct device_node *np = dev->dev->of_node;
+ bool have_any_prop = false;
+ int i, ret;
+
+ for (i = 0; i < ARRAY_SIZE(of_props); i++) {
+ ret = of_property_read_u32(np, of_props[i].name,
+ &of_props[i].value);
+ if (ret && ret != -EINVAL)
+ dev_warn(dev->dev, "Failed to read %s\n",
+ of_props[i].name);
+ if (ret)
+ continue;
+
+ have_any_prop = true;
+ }
+
+ if (!have_any_prop)
+ return 0;
+
+ switch (dev->chip_id) {
+ case KSZ8830_CHIP_ID:
+ return ksz8830_drive_strength_write(dev, of_props,
+ ARRAY_SIZE(of_props));
+ case KSZ8795_CHIP_ID:
+ case KSZ8794_CHIP_ID:
+ case KSZ8765_CHIP_ID:
+ case KSZ8563_CHIP_ID:
+ case KSZ9477_CHIP_ID:
+ case KSZ9563_CHIP_ID:
+ case KSZ9567_CHIP_ID:
+ case KSZ9893_CHIP_ID:
+ case KSZ9896_CHIP_ID:
+ case KSZ9897_CHIP_ID:
+ return ksz9477_drive_strength_write(dev, of_props,
+ ARRAY_SIZE(of_props));
+ default:
+ for (i = 0; i < ARRAY_SIZE(of_props); i++) {
+ if (of_props[i].value == -1)
+ continue;
+
+ dev_warn(dev->dev, "%s is not supported by this chip variant\n",
+ of_props[i].name);
+ }
+ }
+
+ return 0;
+}
+
int ksz_switch_register(struct ksz_device *dev)
{
const struct ksz_chip_data *info;
@@ -3620,6 +4236,10 @@ int ksz_switch_register(struct ksz_device *dev)
for (port_num = 0; port_num < dev->info->port_cnt; ++port_num)
dev->ports[port_num].interface = PHY_INTERFACE_MODE_NA;
if (dev->dev->of_node) {
+ ret = ksz_parse_drive_strength(dev);
+ if (ret)
+ return ret;
+
ret = of_get_phy_mode(dev->dev->of_node, &interface);
if (ret == 0)
dev->compat_interface = interface;
@@ -3651,6 +4271,9 @@ int ksz_switch_register(struct ksz_device *dev)
dev_err(dev->dev, "inconsistent synclko settings\n");
return -EINVAL;
}
+
+ dev->wakeup_source = of_property_read_bool(dev->dev->of_node,
+ "wakeup-source");
}
ret = dsa_register_switch(dev->ds);
diff --git a/drivers/net/dsa/microchip/ksz_common.h b/drivers/net/dsa/microchip/ksz_common.h
index a4de58847d..b7e8a403a1 100644
--- a/drivers/net/dsa/microchip/ksz_common.h
+++ b/drivers/net/dsa/microchip/ksz_common.h
@@ -101,6 +101,11 @@ struct ksz_ptp_irq {
int num;
};
+struct ksz_switch_macaddr {
+ unsigned char addr[ETH_ALEN];
+ refcount_t refcount;
+};
+
struct ksz_port {
bool remove_tag; /* Remove Tag flag set, for ksz8795 only */
bool learning;
@@ -117,6 +122,7 @@ struct ksz_port {
u32 rgmii_tx_val;
u32 rgmii_rx_val;
struct ksz_device *ksz_dev;
+ void *acl_priv;
struct ksz_irq pirq;
u8 num;
#if IS_ENABLED(CONFIG_NET_DSA_MICROCHIP_KSZ_PTP)
@@ -157,6 +163,7 @@ struct ksz_device {
phy_interface_t compat_interface;
bool synclko_125;
bool synclko_disable;
+ bool wakeup_source;
struct vlan_table *vlan_cache;
@@ -169,6 +176,10 @@ struct ksz_device {
struct mutex lock_irq; /* IRQ Access */
struct ksz_irq girq;
struct ksz_ptp_data ptp_data;
+
+ struct ksz_switch_macaddr *switch_macaddr;
+ struct net_device *hsr_dev; /* HSR */
+ u8 hsr_ports;
};
/* List of supported models */
@@ -211,6 +222,7 @@ enum ksz_chip_id {
};
enum ksz_regs {
+ REG_SW_MAC_ADDR,
REG_IND_CTRL_0,
REG_IND_DATA_8,
REG_IND_DATA_CHECK,
@@ -362,6 +374,11 @@ struct ksz_dev_ops {
int duplex, bool tx_pause, bool rx_pause);
void (*setup_rgmii_delay)(struct ksz_device *dev, int port);
int (*tc_cbs_set_cinc)(struct ksz_device *dev, int port, u32 val);
+ void (*get_wol)(struct ksz_device *dev, int port,
+ struct ethtool_wolinfo *wol);
+ int (*set_wol)(struct ksz_device *dev, int port,
+ struct ethtool_wolinfo *wol);
+ void (*wol_pre_shutdown)(struct ksz_device *dev, bool *wol_enabled);
void (*config_cpu_port)(struct dsa_switch *ds);
int (*enable_stp_addr)(struct ksz_device *dev);
int (*reset)(struct ksz_device *dev);
@@ -374,12 +391,17 @@ int ksz_switch_register(struct ksz_device *dev);
void ksz_switch_remove(struct ksz_device *dev);
void ksz_init_mib_timer(struct ksz_device *dev);
+bool ksz_is_port_mac_global_usable(struct dsa_switch *ds, int port);
void ksz_r_mib_stats64(struct ksz_device *dev, int port);
void ksz88xx_r_mib_stats64(struct ksz_device *dev, int port);
void ksz_port_stp_state_set(struct dsa_switch *ds, int port, u8 state);
bool ksz_get_gbit(struct ksz_device *dev, int port);
phy_interface_t ksz_get_xmii(struct ksz_device *dev, int port, bool gbit);
extern const struct ksz_chip_data ksz_switch_chips[];
+int ksz_switch_macaddr_get(struct dsa_switch *ds, int port,
+ struct netlink_ext_ack *extack);
+void ksz_switch_macaddr_put(struct dsa_switch *ds);
+void ksz_switch_shutdown(struct ksz_device *dev);
/* Common register access functions */
static inline struct regmap *ksz_regmap_8(struct ksz_device *dev)
@@ -689,6 +711,26 @@ static inline int is_lan937x(struct ksz_device *dev)
#define KSZ8_LEGAL_PACKET_SIZE 1518
#define KSZ9477_MAX_FRAME_SIZE 9000
+#define KSZ8873_REG_GLOBAL_CTRL_12 0x0e
+/* Drive Strength of I/O Pad
+ * 0: 8mA, 1: 16mA
+ */
+#define KSZ8873_DRIVE_STRENGTH_16MA BIT(6)
+
+#define KSZ8795_REG_SW_CTRL_20 0xa3
+#define KSZ9477_REG_SW_IO_STRENGTH 0x010d
+#define SW_DRIVE_STRENGTH_M 0x7
+#define SW_DRIVE_STRENGTH_2MA 0
+#define SW_DRIVE_STRENGTH_4MA 1
+#define SW_DRIVE_STRENGTH_8MA 2
+#define SW_DRIVE_STRENGTH_12MA 3
+#define SW_DRIVE_STRENGTH_16MA 4
+#define SW_DRIVE_STRENGTH_20MA 5
+#define SW_DRIVE_STRENGTH_24MA 6
+#define SW_DRIVE_STRENGTH_28MA 7
+#define SW_HI_SPEED_DRIVE_STRENGTH_S 4
+#define SW_LO_SPEED_DRIVE_STRENGTH_S 0
+
#define KSZ9477_REG_PORT_OUT_RATE_0 0x0420
#define KSZ9477_OUT_RATE_NO_LIMIT 0
diff --git a/drivers/net/dsa/microchip/ksz_ptp.c b/drivers/net/dsa/microchip/ksz_ptp.c
index 4e22a695a6..1fe105913c 100644
--- a/drivers/net/dsa/microchip/ksz_ptp.c
+++ b/drivers/net/dsa/microchip/ksz_ptp.c
@@ -557,7 +557,7 @@ static void ksz_ptp_txtstamp_skb(struct ksz_device *dev,
struct skb_shared_hwtstamps hwtstamps = {};
int ret;
- /* timeout must include DSA master to transmit data, tstamp latency,
+ /* timeout must include DSA conduit to transmit data, tstamp latency,
* IRQ latency and time for reading the time stamp.
*/
ret = wait_for_completion_timeout(&prt->tstamp_msg_comp,
diff --git a/drivers/net/dsa/microchip/ksz_spi.c b/drivers/net/dsa/microchip/ksz_spi.c
index 2793384516..6f6d878e74 100644
--- a/drivers/net/dsa/microchip/ksz_spi.c
+++ b/drivers/net/dsa/microchip/ksz_spi.c
@@ -114,10 +114,7 @@ static void ksz_spi_shutdown(struct spi_device *spi)
if (!dev)
return;
- if (dev->dev_ops->reset)
- dev->dev_ops->reset(dev);
-
- dsa_switch_shutdown(dev->ds);
+ ksz_switch_shutdown(dev);
spi_set_drvdata(spi, NULL);
}
diff --git a/drivers/net/dsa/mt7530-mmio.c b/drivers/net/dsa/mt7530-mmio.c
index 0a6a2fe34e..b74a230a3f 100644
--- a/drivers/net/dsa/mt7530-mmio.c
+++ b/drivers/net/dsa/mt7530-mmio.c
@@ -63,15 +63,12 @@ mt7988_probe(struct platform_device *pdev)
return dsa_register_switch(priv->ds);
}
-static int
-mt7988_remove(struct platform_device *pdev)
+static void mt7988_remove(struct platform_device *pdev)
{
struct mt7530_priv *priv = platform_get_drvdata(pdev);
if (priv)
mt7530_remove_common(priv);
-
- return 0;
}
static void mt7988_shutdown(struct platform_device *pdev)
@@ -88,7 +85,7 @@ static void mt7988_shutdown(struct platform_device *pdev)
static struct platform_driver mt7988_platform_driver = {
.probe = mt7988_probe,
- .remove = mt7988_remove,
+ .remove_new = mt7988_remove,
.shutdown = mt7988_shutdown,
.driver = {
.name = "mt7530-mmio",
diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c
index 035a34b50f..2333f6383b 100644
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
@@ -836,8 +836,7 @@ mt7530_get_strings(struct dsa_switch *ds, int port, u32 stringset,
return;
for (i = 0; i < ARRAY_SIZE(mt7530_mib); i++)
- strncpy(data + i * ETH_GSTRING_LEN, mt7530_mib[i].name,
- ETH_GSTRING_LEN);
+ ethtool_sprintf(&data, "%s", mt7530_mib[i].name);
}
static void
@@ -1114,7 +1113,7 @@ mt7530_port_change_mtu(struct dsa_switch *ds, int port, int new_mtu)
u32 val;
/* When a new MTU is set, DSA always set the CPU port's MTU to the
- * largest MTU of the slave ports. Because the switch only has a global
+ * largest MTU of the user ports. Because the switch only has a global
* RX length register, only allowing CPU port here is enough.
*/
if (!dsa_is_cpu_port(ds, port))
@@ -2070,7 +2069,7 @@ mt7530_setup_mdio_irq(struct mt7530_priv *priv)
unsigned int irq;
irq = irq_create_mapping(priv->irq_domain, p);
- ds->slave_mii_bus->irq[p] = irq;
+ ds->user_mii_bus->irq[p] = irq;
}
}
}
@@ -2164,7 +2163,7 @@ mt7530_setup_mdio(struct mt7530_priv *priv)
if (!bus)
return -ENOMEM;
- ds->slave_mii_bus = bus;
+ ds->user_mii_bus = bus;
bus->priv = priv;
bus->name = KBUILD_MODNAME "-mii";
snprintf(bus->id, MII_BUS_ID_SIZE, KBUILD_MODNAME "-%d", idx++);
@@ -2201,20 +2200,20 @@ mt7530_setup(struct dsa_switch *ds)
u32 id, val;
int ret, i;
- /* The parent node of master netdev which holds the common system
+ /* The parent node of conduit netdev which holds the common system
* controller also is the container for two GMACs nodes representing
* as two netdev instances.
*/
dsa_switch_for_each_cpu_port(cpu_dp, ds) {
- dn = cpu_dp->master->dev.of_node->parent;
+ dn = cpu_dp->conduit->dev.of_node->parent;
/* It doesn't matter which CPU port is found first,
- * their masters should share the same parent OF node
+ * their conduits should share the same parent OF node
*/
break;
}
if (!dn) {
- dev_err(ds->dev, "parent OF node of DSA master not found");
+ dev_err(ds->dev, "parent OF node of DSA conduit not found");
return -EINVAL;
}
@@ -2489,7 +2488,7 @@ mt7531_setup(struct dsa_switch *ds)
if (mt7531_dual_sgmii_supported(priv)) {
priv->p5_intf_sel = P5_INTF_SEL_GMAC5_SGMII;
- /* Let ds->slave_mii_bus be able to access external phy. */
+ /* Let ds->user_mii_bus be able to access external phy. */
mt7530_rmw(priv, MT7531_GPIO_MODE1, MT7531_GPIO11_RG_RXD2_MASK,
MT7531_EXT_P_MDC_11);
mt7530_rmw(priv, MT7531_GPIO_MODE1, MT7531_GPIO12_RG_RXD3_MASK,
@@ -2718,7 +2717,7 @@ mt7531_mac_config(struct dsa_switch *ds, int port, unsigned int mode,
case PHY_INTERFACE_MODE_RGMII_RXID:
case PHY_INTERFACE_MODE_RGMII_TXID:
dp = dsa_to_port(ds, port);
- phydev = dp->slave->phydev;
+ phydev = dp->user->phydev;
return mt7531_rgmii_setup(priv, port, interface, phydev);
case PHY_INTERFACE_MODE_SGMII:
case PHY_INTERFACE_MODE_NA:
@@ -2824,15 +2823,6 @@ static void mt753x_phylink_mac_link_down(struct dsa_switch *ds, int port,
mt7530_clear(priv, MT7530_PMCR_P(port), PMCR_LINK_SETTINGS_MASK);
}
-static void mt753x_phylink_pcs_link_up(struct phylink_pcs *pcs,
- unsigned int mode,
- phy_interface_t interface,
- int speed, int duplex)
-{
- if (pcs->ops->pcs_link_up)
- pcs->ops->pcs_link_up(pcs, mode, interface, speed, duplex);
-}
-
static void mt753x_phylink_mac_link_up(struct dsa_switch *ds, int port,
unsigned int mode,
phy_interface_t interface,
@@ -2848,8 +2838,7 @@ static void mt753x_phylink_mac_link_up(struct dsa_switch *ds, int port,
/* MT753x MAC works in 1G full duplex mode for all up-clocked
* variants.
*/
- if (interface == PHY_INTERFACE_MODE_INTERNAL ||
- interface == PHY_INTERFACE_MODE_TRGMII ||
+ if (interface == PHY_INTERFACE_MODE_TRGMII ||
(phy_interface_mode_is_8023z(interface))) {
speed = SPEED_1000;
duplex = DUPLEX_FULL;
@@ -2921,8 +2910,6 @@ mt7531_cpu_port_config(struct dsa_switch *ds, int port)
return ret;
mt7530_write(priv, MT7530_PMCR_P(port),
PMCR_CPU_PORT_SETTING(priv->id));
- mt753x_phylink_pcs_link_up(&priv->pcs[port].pcs, MLO_AN_FIXED,
- interface, speed, DUPLEX_FULL);
mt753x_phylink_mac_link_up(ds, port, MLO_AN_FIXED, interface, NULL,
speed, DUPLEX_FULL, true, true);
diff --git a/drivers/net/dsa/mv88e6xxx/chip.c b/drivers/net/dsa/mv88e6xxx/chip.c
index dc7f9b99f4..dd2cbffcfe 100644
--- a/drivers/net/dsa/mv88e6xxx/chip.c
+++ b/drivers/net/dsa/mv88e6xxx/chip.c
@@ -2498,7 +2498,7 @@ static int mv88e6xxx_port_vlan_add(struct dsa_switch *ds, int port,
else
member = MV88E6XXX_G1_VTU_DATA_MEMBER_TAG_TAGGED;
- /* net/dsa/slave.c will call dsa_port_vlan_add() for the affected port
+ /* net/dsa/user.c will call dsa_port_vlan_add() for the affected port
* and then the CPU port. Do not warn for duplicates for the CPU port.
*/
warn = !dsa_is_cpu_port(ds, port) && !dsa_is_dsa_port(ds, port);
@@ -3545,7 +3545,7 @@ static int mv88e6xxx_mdio_read_c45(struct mii_bus *bus, int phy, int devad,
int err;
if (!chip->info->ops->phy_read_c45)
- return -EOPNOTSUPP;
+ return 0xffff;
mv88e6xxx_reg_lock(chip);
err = chip->info->ops->phy_read_c45(chip, bus, phy, devad, reg, &val);
@@ -3731,7 +3731,7 @@ static int mv88e6xxx_setup(struct dsa_switch *ds)
return err;
chip->ds = ds;
- ds->slave_mii_bus = mv88e6xxx_default_mdio_bus(chip);
+ ds->user_mii_bus = mv88e6xxx_default_mdio_bus(chip);
/* Since virtual bridges are mapped in the PVT, the number we support
* depends on the physical switch topology. We need to let DSA figure
diff --git a/drivers/net/dsa/mv88e6xxx/chip.h b/drivers/net/dsa/mv88e6xxx/chip.h
index 44383a03ef..c54d305a1d 100644
--- a/drivers/net/dsa/mv88e6xxx/chip.h
+++ b/drivers/net/dsa/mv88e6xxx/chip.h
@@ -601,8 +601,8 @@ struct mv88e6xxx_ops {
int (*serdes_get_sset_count)(struct mv88e6xxx_chip *chip, int port);
int (*serdes_get_strings)(struct mv88e6xxx_chip *chip, int port,
uint8_t *data);
- int (*serdes_get_stats)(struct mv88e6xxx_chip *chip, int port,
- uint64_t *data);
+ size_t (*serdes_get_stats)(struct mv88e6xxx_chip *chip, int port,
+ uint64_t *data);
/* SERDES registers for ethtool */
int (*serdes_get_regs_len)(struct mv88e6xxx_chip *chip, int port);
diff --git a/drivers/net/dsa/mv88e6xxx/pcs-639x.c b/drivers/net/dsa/mv88e6xxx/pcs-639x.c
index c31f0e54f1..d758a6c1b2 100644
--- a/drivers/net/dsa/mv88e6xxx/pcs-639x.c
+++ b/drivers/net/dsa/mv88e6xxx/pcs-639x.c
@@ -208,7 +208,7 @@ static void mv88e639x_sgmii_pcs_pre_config(struct phylink_pcs *pcs,
static int mv88e6390_erratum_3_14(struct mv88e639x_pcs *mpcs)
{
- const int lanes[] = { MV88E6390_PORT9_LANE0, MV88E6390_PORT9_LANE1,
+ static const int lanes[] = { MV88E6390_PORT9_LANE0, MV88E6390_PORT9_LANE1,
MV88E6390_PORT9_LANE2, MV88E6390_PORT9_LANE3,
MV88E6390_PORT10_LANE0, MV88E6390_PORT10_LANE1,
MV88E6390_PORT10_LANE2, MV88E6390_PORT10_LANE3 };
diff --git a/drivers/net/dsa/mv88e6xxx/ptp.c b/drivers/net/dsa/mv88e6xxx/ptp.c
index ea17231dc3..56391e09b3 100644
--- a/drivers/net/dsa/mv88e6xxx/ptp.c
+++ b/drivers/net/dsa/mv88e6xxx/ptp.c
@@ -182,6 +182,10 @@ static void mv88e6352_tai_event_work(struct work_struct *ugly)
mv88e6xxx_reg_lock(chip);
err = mv88e6xxx_tai_write(chip, MV88E6XXX_TAI_EVENT_STATUS, status[0]);
mv88e6xxx_reg_unlock(chip);
+ if (err) {
+ dev_err(chip->dev, "failed to write TAI status register\n");
+ return;
+ }
/* This is an external timestamp */
ev.type = PTP_CLOCK_EXTTS;
diff --git a/drivers/net/dsa/mv88e6xxx/serdes.c b/drivers/net/dsa/mv88e6xxx/serdes.c
index 3b4b42651f..01ea539407 100644
--- a/drivers/net/dsa/mv88e6xxx/serdes.c
+++ b/drivers/net/dsa/mv88e6xxx/serdes.c
@@ -177,8 +177,8 @@ static uint64_t mv88e6352_serdes_get_stat(struct mv88e6xxx_chip *chip,
return val;
}
-int mv88e6352_serdes_get_stats(struct mv88e6xxx_chip *chip, int port,
- uint64_t *data)
+size_t mv88e6352_serdes_get_stats(struct mv88e6xxx_chip *chip, int port,
+ uint64_t *data)
{
struct mv88e6xxx_port *mv88e6xxx_port = &chip->ports[port];
struct mv88e6352_serdes_hw_stat *stat;
@@ -187,7 +187,7 @@ int mv88e6352_serdes_get_stats(struct mv88e6xxx_chip *chip, int port,
err = mv88e6352_g2_scratch_port_has_serdes(chip, port);
if (err <= 0)
- return err;
+ return 0;
BUILD_BUG_ON(ARRAY_SIZE(mv88e6352_serdes_hw_stats) >
ARRAY_SIZE(mv88e6xxx_port->serdes_stats));
@@ -429,8 +429,8 @@ static uint64_t mv88e6390_serdes_get_stat(struct mv88e6xxx_chip *chip, int lane,
return reg[0] | ((u64)reg[1] << 16) | ((u64)reg[2] << 32);
}
-int mv88e6390_serdes_get_stats(struct mv88e6xxx_chip *chip, int port,
- uint64_t *data)
+size_t mv88e6390_serdes_get_stats(struct mv88e6xxx_chip *chip, int port,
+ uint64_t *data)
{
struct mv88e6390_serdes_hw_stat *stat;
int lane;
diff --git a/drivers/net/dsa/mv88e6xxx/serdes.h b/drivers/net/dsa/mv88e6xxx/serdes.h
index aac95cab46..ff5c3ab31e 100644
--- a/drivers/net/dsa/mv88e6xxx/serdes.h
+++ b/drivers/net/dsa/mv88e6xxx/serdes.h
@@ -127,13 +127,13 @@ unsigned int mv88e6390_serdes_irq_mapping(struct mv88e6xxx_chip *chip,
int mv88e6352_serdes_get_sset_count(struct mv88e6xxx_chip *chip, int port);
int mv88e6352_serdes_get_strings(struct mv88e6xxx_chip *chip,
int port, uint8_t *data);
-int mv88e6352_serdes_get_stats(struct mv88e6xxx_chip *chip, int port,
- uint64_t *data);
+size_t mv88e6352_serdes_get_stats(struct mv88e6xxx_chip *chip, int port,
+ uint64_t *data);
int mv88e6390_serdes_get_sset_count(struct mv88e6xxx_chip *chip, int port);
int mv88e6390_serdes_get_strings(struct mv88e6xxx_chip *chip,
int port, uint8_t *data);
-int mv88e6390_serdes_get_stats(struct mv88e6xxx_chip *chip, int port,
- uint64_t *data);
+size_t mv88e6390_serdes_get_stats(struct mv88e6xxx_chip *chip, int port,
+ uint64_t *data);
int mv88e6352_serdes_get_regs_len(struct mv88e6xxx_chip *chip, int port);
void mv88e6352_serdes_get_regs(struct mv88e6xxx_chip *chip, int port, void *_p);
diff --git a/drivers/net/dsa/ocelot/felix.c b/drivers/net/dsa/ocelot/felix.c
index 9a3e5ec169..61e9548773 100644
--- a/drivers/net/dsa/ocelot/felix.c
+++ b/drivers/net/dsa/ocelot/felix.c
@@ -42,22 +42,22 @@ static struct net_device *felix_classify_db(struct dsa_db db)
}
}
-static int felix_cpu_port_for_master(struct dsa_switch *ds,
- struct net_device *master)
+static int felix_cpu_port_for_conduit(struct dsa_switch *ds,
+ struct net_device *conduit)
{
struct ocelot *ocelot = ds->priv;
struct dsa_port *cpu_dp;
int lag;
- if (netif_is_lag_master(master)) {
+ if (netif_is_lag_master(conduit)) {
mutex_lock(&ocelot->fwd_domain_lock);
- lag = ocelot_bond_get_id(ocelot, master);
+ lag = ocelot_bond_get_id(ocelot, conduit);
mutex_unlock(&ocelot->fwd_domain_lock);
return lag;
}
- cpu_dp = master->dsa_ptr;
+ cpu_dp = conduit->dsa_ptr;
return cpu_dp->index;
}
@@ -366,7 +366,7 @@ static int felix_update_trapping_destinations(struct dsa_switch *ds,
* is the mode through which frames can be injected from and extracted to an
* external CPU, over Ethernet. In NXP SoCs, the "external CPU" is the ARM CPU
* running Linux, and this forms a DSA setup together with the enetc or fman
- * DSA master.
+ * DSA conduit.
*/
static void felix_npi_port_init(struct ocelot *ocelot, int port)
{
@@ -441,16 +441,16 @@ static unsigned long felix_tag_npi_get_host_fwd_mask(struct dsa_switch *ds)
return BIT(ocelot->num_phys_ports);
}
-static int felix_tag_npi_change_master(struct dsa_switch *ds, int port,
- struct net_device *master,
- struct netlink_ext_ack *extack)
+static int felix_tag_npi_change_conduit(struct dsa_switch *ds, int port,
+ struct net_device *conduit,
+ struct netlink_ext_ack *extack)
{
struct dsa_port *dp = dsa_to_port(ds, port), *other_dp;
struct ocelot *ocelot = ds->priv;
- if (netif_is_lag_master(master)) {
+ if (netif_is_lag_master(conduit)) {
NL_SET_ERR_MSG_MOD(extack,
- "LAG DSA master only supported using ocelot-8021q");
+ "LAG DSA conduit only supported using ocelot-8021q");
return -EOPNOTSUPP;
}
@@ -459,24 +459,24 @@ static int felix_tag_npi_change_master(struct dsa_switch *ds, int port,
* come back up until they're all changed to the new one.
*/
dsa_switch_for_each_user_port(other_dp, ds) {
- struct net_device *slave = other_dp->slave;
+ struct net_device *user = other_dp->user;
- if (other_dp != dp && (slave->flags & IFF_UP) &&
- dsa_port_to_master(other_dp) != master) {
+ if (other_dp != dp && (user->flags & IFF_UP) &&
+ dsa_port_to_conduit(other_dp) != conduit) {
NL_SET_ERR_MSG_MOD(extack,
- "Cannot change while old master still has users");
+ "Cannot change while old conduit still has users");
return -EOPNOTSUPP;
}
}
felix_npi_port_deinit(ocelot, ocelot->npi);
- felix_npi_port_init(ocelot, felix_cpu_port_for_master(ds, master));
+ felix_npi_port_init(ocelot, felix_cpu_port_for_conduit(ds, conduit));
return 0;
}
/* Alternatively to using the NPI functionality, that same hardware MAC
- * connected internally to the enetc or fman DSA master can be configured to
+ * connected internally to the enetc or fman DSA conduit can be configured to
* use the software-defined tag_8021q frame format. As far as the hardware is
* concerned, it thinks it is a "dumb switch" - the queues of the CPU port
* module are now disconnected from it, but can still be accessed through
@@ -486,7 +486,7 @@ static const struct felix_tag_proto_ops felix_tag_npi_proto_ops = {
.setup = felix_tag_npi_setup,
.teardown = felix_tag_npi_teardown,
.get_host_fwd_mask = felix_tag_npi_get_host_fwd_mask,
- .change_master = felix_tag_npi_change_master,
+ .change_conduit = felix_tag_npi_change_conduit,
};
static int felix_tag_8021q_setup(struct dsa_switch *ds)
@@ -561,11 +561,11 @@ static unsigned long felix_tag_8021q_get_host_fwd_mask(struct dsa_switch *ds)
return dsa_cpu_ports(ds);
}
-static int felix_tag_8021q_change_master(struct dsa_switch *ds, int port,
- struct net_device *master,
- struct netlink_ext_ack *extack)
+static int felix_tag_8021q_change_conduit(struct dsa_switch *ds, int port,
+ struct net_device *conduit,
+ struct netlink_ext_ack *extack)
{
- int cpu = felix_cpu_port_for_master(ds, master);
+ int cpu = felix_cpu_port_for_conduit(ds, conduit);
struct ocelot *ocelot = ds->priv;
ocelot_port_unassign_dsa_8021q_cpu(ocelot, port);
@@ -578,7 +578,7 @@ static const struct felix_tag_proto_ops felix_tag_8021q_proto_ops = {
.setup = felix_tag_8021q_setup,
.teardown = felix_tag_8021q_teardown,
.get_host_fwd_mask = felix_tag_8021q_get_host_fwd_mask,
- .change_master = felix_tag_8021q_change_master,
+ .change_conduit = felix_tag_8021q_change_conduit,
};
static void felix_set_host_flood(struct dsa_switch *ds, unsigned long mask,
@@ -741,14 +741,14 @@ static void felix_port_set_host_flood(struct dsa_switch *ds, int port,
!!felix->host_flood_mc_mask, true);
}
-static int felix_port_change_master(struct dsa_switch *ds, int port,
- struct net_device *master,
- struct netlink_ext_ack *extack)
+static int felix_port_change_conduit(struct dsa_switch *ds, int port,
+ struct net_device *conduit,
+ struct netlink_ext_ack *extack)
{
struct ocelot *ocelot = ds->priv;
struct felix *felix = ocelot_to_felix(ocelot);
- return felix->tag_proto_ops->change_master(ds, port, master, extack);
+ return felix->tag_proto_ops->change_conduit(ds, port, conduit, extack);
}
static int felix_set_ageing_time(struct dsa_switch *ds,
@@ -953,7 +953,7 @@ static int felix_lag_join(struct dsa_switch *ds, int port,
if (!dsa_is_cpu_port(ds, port))
return 0;
- return felix_port_change_master(ds, port, lag.dev, extack);
+ return felix_port_change_conduit(ds, port, lag.dev, extack);
}
static int felix_lag_leave(struct dsa_switch *ds, int port,
@@ -967,7 +967,7 @@ static int felix_lag_leave(struct dsa_switch *ds, int port,
if (!dsa_is_cpu_port(ds, port))
return 0;
- return felix_port_change_master(ds, port, lag.dev, NULL);
+ return felix_port_change_conduit(ds, port, lag.dev, NULL);
}
static int felix_lag_change(struct dsa_switch *ds, int port)
@@ -1116,10 +1116,10 @@ static int felix_port_enable(struct dsa_switch *ds, int port,
return 0;
if (ocelot->npi >= 0) {
- struct net_device *master = dsa_port_to_master(dp);
+ struct net_device *conduit = dsa_port_to_conduit(dp);
- if (felix_cpu_port_for_master(ds, master) != ocelot->npi) {
- dev_err(ds->dev, "Multiple masters are not allowed\n");
+ if (felix_cpu_port_for_conduit(ds, conduit) != ocelot->npi) {
+ dev_err(ds->dev, "Multiple conduits are not allowed\n");
return -EINVAL;
}
}
@@ -2164,7 +2164,7 @@ const struct dsa_switch_ops felix_switch_ops = {
.port_add_dscp_prio = felix_port_add_dscp_prio,
.port_del_dscp_prio = felix_port_del_dscp_prio,
.port_set_host_flood = felix_port_set_host_flood,
- .port_change_master = felix_port_change_master,
+ .port_change_conduit = felix_port_change_conduit,
};
EXPORT_SYMBOL_GPL(felix_switch_ops);
@@ -2176,7 +2176,7 @@ struct net_device *felix_port_to_netdev(struct ocelot *ocelot, int port)
if (!dsa_is_user_port(ds, port))
return NULL;
- return dsa_to_port(ds, port)->slave;
+ return dsa_to_port(ds, port)->user;
}
EXPORT_SYMBOL_GPL(felix_port_to_netdev);
diff --git a/drivers/net/dsa/ocelot/felix.h b/drivers/net/dsa/ocelot/felix.h
index 1d4befe7cf..dbf5872fe3 100644
--- a/drivers/net/dsa/ocelot/felix.h
+++ b/drivers/net/dsa/ocelot/felix.h
@@ -77,9 +77,9 @@ struct felix_tag_proto_ops {
int (*setup)(struct dsa_switch *ds);
void (*teardown)(struct dsa_switch *ds);
unsigned long (*get_host_fwd_mask)(struct dsa_switch *ds);
- int (*change_master)(struct dsa_switch *ds, int port,
- struct net_device *master,
- struct netlink_ext_ack *extack);
+ int (*change_conduit)(struct dsa_switch *ds, int port,
+ struct net_device *conduit,
+ struct netlink_ext_ack *extack);
};
extern const struct dsa_switch_ops felix_switch_ops;
diff --git a/drivers/net/dsa/ocelot/ocelot_ext.c b/drivers/net/dsa/ocelot/ocelot_ext.c
index c29bee5a5c..22187d831c 100644
--- a/drivers/net/dsa/ocelot/ocelot_ext.c
+++ b/drivers/net/dsa/ocelot/ocelot_ext.c
@@ -115,19 +115,17 @@ err_free_felix:
return err;
}
-static int ocelot_ext_remove(struct platform_device *pdev)
+static void ocelot_ext_remove(struct platform_device *pdev)
{
struct felix *felix = dev_get_drvdata(&pdev->dev);
if (!felix)
- return 0;
+ return;
dsa_unregister_switch(felix->ds);
kfree(felix->ds);
kfree(felix);
-
- return 0;
}
static void ocelot_ext_shutdown(struct platform_device *pdev)
@@ -154,7 +152,7 @@ static struct platform_driver ocelot_ext_switch_driver = {
.of_match_table = ocelot_ext_switch_of_match,
},
.probe = ocelot_ext_probe,
- .remove = ocelot_ext_remove,
+ .remove_new = ocelot_ext_remove,
.shutdown = ocelot_ext_shutdown,
};
module_platform_driver(ocelot_ext_switch_driver);
diff --git a/drivers/net/dsa/ocelot/seville_vsc9953.c b/drivers/net/dsa/ocelot/seville_vsc9953.c
index 8f912bda12..049930da05 100644
--- a/drivers/net/dsa/ocelot/seville_vsc9953.c
+++ b/drivers/net/dsa/ocelot/seville_vsc9953.c
@@ -1029,19 +1029,17 @@ err_alloc_felix:
return err;
}
-static int seville_remove(struct platform_device *pdev)
+static void seville_remove(struct platform_device *pdev)
{
struct felix *felix = platform_get_drvdata(pdev);
if (!felix)
- return 0;
+ return;
dsa_unregister_switch(felix->ds);
kfree(felix->ds);
kfree(felix);
-
- return 0;
}
static void seville_shutdown(struct platform_device *pdev)
@@ -1064,7 +1062,7 @@ MODULE_DEVICE_TABLE(of, seville_of_match);
static struct platform_driver seville_vsc9953_driver = {
.probe = seville_probe,
- .remove = seville_remove,
+ .remove_new = seville_remove,
.shutdown = seville_shutdown,
.driver = {
.name = "mscc_seville",
diff --git a/drivers/net/dsa/qca/qca8k-8xxx.c b/drivers/net/dsa/qca/qca8k-8xxx.c
index 4ce68e655a..6f2a7aee7e 100644
--- a/drivers/net/dsa/qca/qca8k-8xxx.c
+++ b/drivers/net/dsa/qca/qca8k-8xxx.c
@@ -323,14 +323,14 @@ static int qca8k_read_eth(struct qca8k_priv *priv, u32 reg, u32 *val, int len)
mutex_lock(&mgmt_eth_data->mutex);
- /* Check mgmt_master if is operational */
- if (!priv->mgmt_master) {
+ /* Check if the mgmt_conduit if is operational */
+ if (!priv->mgmt_conduit) {
kfree_skb(skb);
mutex_unlock(&mgmt_eth_data->mutex);
return -EINVAL;
}
- skb->dev = priv->mgmt_master;
+ skb->dev = priv->mgmt_conduit;
reinit_completion(&mgmt_eth_data->rw_done);
@@ -375,14 +375,14 @@ static int qca8k_write_eth(struct qca8k_priv *priv, u32 reg, u32 *val, int len)
mutex_lock(&mgmt_eth_data->mutex);
- /* Check mgmt_master if is operational */
- if (!priv->mgmt_master) {
+ /* Check if the mgmt_conduit if is operational */
+ if (!priv->mgmt_conduit) {
kfree_skb(skb);
mutex_unlock(&mgmt_eth_data->mutex);
return -EINVAL;
}
- skb->dev = priv->mgmt_master;
+ skb->dev = priv->mgmt_conduit;
reinit_completion(&mgmt_eth_data->rw_done);
@@ -508,7 +508,7 @@ qca8k_bulk_read(void *ctx, const void *reg_buf, size_t reg_len,
struct qca8k_priv *priv = ctx;
u32 reg = *(u16 *)reg_buf;
- if (priv->mgmt_master &&
+ if (priv->mgmt_conduit &&
!qca8k_read_eth(priv, reg, val_buf, val_len))
return 0;
@@ -531,7 +531,7 @@ qca8k_bulk_gather_write(void *ctx, const void *reg_buf, size_t reg_len,
u32 reg = *(u16 *)reg_buf;
u32 *val = (u32 *)val_buf;
- if (priv->mgmt_master &&
+ if (priv->mgmt_conduit &&
!qca8k_write_eth(priv, reg, val, val_len))
return 0;
@@ -626,7 +626,7 @@ qca8k_phy_eth_command(struct qca8k_priv *priv, bool read, int phy,
struct sk_buff *write_skb, *clear_skb, *read_skb;
struct qca8k_mgmt_eth_data *mgmt_eth_data;
u32 write_val, clear_val = 0, val;
- struct net_device *mgmt_master;
+ struct net_device *mgmt_conduit;
int ret, ret1;
bool ack;
@@ -683,18 +683,18 @@ qca8k_phy_eth_command(struct qca8k_priv *priv, bool read, int phy,
*/
mutex_lock(&mgmt_eth_data->mutex);
- /* Check if mgmt_master is operational */
- mgmt_master = priv->mgmt_master;
- if (!mgmt_master) {
+ /* Check if mgmt_conduit is operational */
+ mgmt_conduit = priv->mgmt_conduit;
+ if (!mgmt_conduit) {
mutex_unlock(&mgmt_eth_data->mutex);
mutex_unlock(&priv->bus->mdio_lock);
ret = -EINVAL;
- goto err_mgmt_master;
+ goto err_mgmt_conduit;
}
- read_skb->dev = mgmt_master;
- clear_skb->dev = mgmt_master;
- write_skb->dev = mgmt_master;
+ read_skb->dev = mgmt_conduit;
+ clear_skb->dev = mgmt_conduit;
+ write_skb->dev = mgmt_conduit;
reinit_completion(&mgmt_eth_data->rw_done);
@@ -780,7 +780,7 @@ exit:
return ret;
/* Error handling before lock */
-err_mgmt_master:
+err_mgmt_conduit:
kfree_skb(read_skb);
err_read_skb:
kfree_skb(clear_skb);
@@ -949,34 +949,45 @@ qca8k_mdio_register(struct qca8k_priv *priv)
struct dsa_switch *ds = priv->ds;
struct device_node *mdio;
struct mii_bus *bus;
+ int err;
+
+ mdio = of_get_child_by_name(priv->dev->of_node, "mdio");
bus = devm_mdiobus_alloc(ds->dev);
- if (!bus)
- return -ENOMEM;
+ if (!bus) {
+ err = -ENOMEM;
+ goto out_put_node;
+ }
bus->priv = (void *)priv;
snprintf(bus->id, MII_BUS_ID_SIZE, "qca8k-%d.%d",
ds->dst->index, ds->index);
bus->parent = ds->dev;
bus->phy_mask = ~ds->phys_mii_mask;
- ds->slave_mii_bus = bus;
+ ds->user_mii_bus = bus;
/* Check if the devicetree declare the port:phy mapping */
- mdio = of_get_child_by_name(priv->dev->of_node, "mdio");
if (of_device_is_available(mdio)) {
- bus->name = "qca8k slave mii";
+ bus->name = "qca8k user mii";
bus->read = qca8k_internal_mdio_read;
bus->write = qca8k_internal_mdio_write;
- return devm_of_mdiobus_register(priv->dev, bus, mdio);
+ err = devm_of_mdiobus_register(priv->dev, bus, mdio);
+ goto out_put_node;
}
/* If a mapping can't be found the legacy mapping is used,
* using the qca8k_port_to_phy function
*/
- bus->name = "qca8k-legacy slave mii";
+ bus->name = "qca8k-legacy user mii";
bus->read = qca8k_legacy_mdio_read;
bus->write = qca8k_legacy_mdio_write;
- return devm_mdiobus_register(priv->dev, bus);
+
+ err = devm_mdiobus_register(priv->dev, bus);
+
+out_put_node:
+ of_node_put(mdio);
+
+ return err;
}
static int
@@ -1728,10 +1739,10 @@ qca8k_get_tag_protocol(struct dsa_switch *ds, int port,
}
static void
-qca8k_master_change(struct dsa_switch *ds, const struct net_device *master,
- bool operational)
+qca8k_conduit_change(struct dsa_switch *ds, const struct net_device *conduit,
+ bool operational)
{
- struct dsa_port *dp = master->dsa_ptr;
+ struct dsa_port *dp = conduit->dsa_ptr;
struct qca8k_priv *priv = ds->priv;
/* Ethernet MIB/MDIO is only supported for CPU port 0 */
@@ -1741,7 +1752,7 @@ qca8k_master_change(struct dsa_switch *ds, const struct net_device *master,
mutex_lock(&priv->mgmt_eth_data.mutex);
mutex_lock(&priv->mib_eth_data.mutex);
- priv->mgmt_master = operational ? (struct net_device *)master : NULL;
+ priv->mgmt_conduit = operational ? (struct net_device *)conduit : NULL;
mutex_unlock(&priv->mib_eth_data.mutex);
mutex_unlock(&priv->mgmt_eth_data.mutex);
@@ -2016,7 +2027,7 @@ static const struct dsa_switch_ops qca8k_switch_ops = {
.get_phy_flags = qca8k_get_phy_flags,
.port_lag_join = qca8k_port_lag_join,
.port_lag_leave = qca8k_port_lag_leave,
- .master_state_change = qca8k_master_change,
+ .conduit_state_change = qca8k_conduit_change,
.connect_tag_protocol = qca8k_connect_tag_protocol,
};
@@ -2038,12 +2049,11 @@ qca8k_sw_probe(struct mdio_device *mdiodev)
priv->info = of_device_get_match_data(priv->dev);
priv->reset_gpio = devm_gpiod_get_optional(priv->dev, "reset",
- GPIOD_ASIS);
+ GPIOD_OUT_HIGH);
if (IS_ERR(priv->reset_gpio))
return PTR_ERR(priv->reset_gpio);
if (priv->reset_gpio) {
- gpiod_set_value_cansleep(priv->reset_gpio, 1);
/* The active low duration must be greater than 10 ms
* and checkpatch.pl wants 20 ms.
*/
diff --git a/drivers/net/dsa/qca/qca8k-common.c b/drivers/net/dsa/qca/qca8k-common.c
index fce04ce12c..9243eff891 100644
--- a/drivers/net/dsa/qca/qca8k-common.c
+++ b/drivers/net/dsa/qca/qca8k-common.c
@@ -487,8 +487,7 @@ void qca8k_get_strings(struct dsa_switch *ds, int port, u32 stringset,
return;
for (i = 0; i < priv->info->mib_count; i++)
- strncpy(data + i * ETH_GSTRING_LEN, ar8327_mib[i].name,
- ETH_GSTRING_LEN);
+ ethtool_sprintf(&data, "%s", ar8327_mib[i].name);
}
void qca8k_get_ethtool_stats(struct dsa_switch *ds, int port,
@@ -500,7 +499,7 @@ void qca8k_get_ethtool_stats(struct dsa_switch *ds, int port,
u32 hi = 0;
int ret;
- if (priv->mgmt_master && priv->info->ops->autocast_mib &&
+ if (priv->mgmt_conduit && priv->info->ops->autocast_mib &&
priv->info->ops->autocast_mib(ds, port, data) > 0)
return;
@@ -762,7 +761,7 @@ int qca8k_port_change_mtu(struct dsa_switch *ds, int port, int new_mtu)
int ret;
/* We have only have a general MTU setting.
- * DSA always set the CPU port's MTU to the largest MTU of the slave
+ * DSA always set the CPU port's MTU to the largest MTU of the user
* ports.
* Setting MTU just for the CPU port is sufficient to correctly set a
* value for every port.
diff --git a/drivers/net/dsa/qca/qca8k-leds.c b/drivers/net/dsa/qca/qca8k-leds.c
index e8c16e76e3..90e30c2909 100644
--- a/drivers/net/dsa/qca/qca8k-leds.c
+++ b/drivers/net/dsa/qca/qca8k-leds.c
@@ -356,8 +356,8 @@ static struct device *qca8k_cled_hw_control_get_device(struct led_classdev *ldev
dp = dsa_to_port(priv->ds, qca8k_phy_to_port(led->port_num));
if (!dp)
return NULL;
- if (dp->slave)
- return &dp->slave->dev;
+ if (dp->user)
+ return &dp->user->dev;
return NULL;
}
@@ -429,7 +429,7 @@ qca8k_parse_port_leds(struct qca8k_priv *priv, struct fwnode_handle *port, int p
init_data.default_label = ":port";
init_data.fwnode = led;
init_data.devname_mandatory = true;
- init_data.devicename = kasprintf(GFP_KERNEL, "%s:0%d", ds->slave_mii_bus->id,
+ init_data.devicename = kasprintf(GFP_KERNEL, "%s:0%d", ds->user_mii_bus->id,
port_num);
if (!init_data.devicename)
return -ENOMEM;
diff --git a/drivers/net/dsa/qca/qca8k.h b/drivers/net/dsa/qca/qca8k.h
index 8f88b7db38..2ac7e88f8d 100644
--- a/drivers/net/dsa/qca/qca8k.h
+++ b/drivers/net/dsa/qca/qca8k.h
@@ -458,7 +458,7 @@ struct qca8k_priv {
struct mutex reg_mutex;
struct device *dev;
struct gpio_desc *reset_gpio;
- struct net_device *mgmt_master; /* Track if mdio/mib Ethernet is available */
+ struct net_device *mgmt_conduit; /* Track if mdio/mib Ethernet is available */
struct qca8k_mgmt_eth_data mgmt_eth_data;
struct qca8k_mib_eth_data mib_eth_data;
struct qca8k_mdio_cache mdio_cache;
diff --git a/drivers/net/dsa/realtek/realtek-smi.c b/drivers/net/dsa/realtek/realtek-smi.c
index ff13563059..755546ed8d 100644
--- a/drivers/net/dsa/realtek/realtek-smi.c
+++ b/drivers/net/dsa/realtek/realtek-smi.c
@@ -378,25 +378,25 @@ static int realtek_smi_setup_mdio(struct dsa_switch *ds)
return -ENODEV;
}
- priv->slave_mii_bus = devm_mdiobus_alloc(priv->dev);
- if (!priv->slave_mii_bus) {
+ priv->user_mii_bus = devm_mdiobus_alloc(priv->dev);
+ if (!priv->user_mii_bus) {
ret = -ENOMEM;
goto err_put_node;
}
- priv->slave_mii_bus->priv = priv;
- priv->slave_mii_bus->name = "SMI slave MII";
- priv->slave_mii_bus->read = realtek_smi_mdio_read;
- priv->slave_mii_bus->write = realtek_smi_mdio_write;
- snprintf(priv->slave_mii_bus->id, MII_BUS_ID_SIZE, "SMI-%d",
+ priv->user_mii_bus->priv = priv;
+ priv->user_mii_bus->name = "SMI user MII";
+ priv->user_mii_bus->read = realtek_smi_mdio_read;
+ priv->user_mii_bus->write = realtek_smi_mdio_write;
+ snprintf(priv->user_mii_bus->id, MII_BUS_ID_SIZE, "SMI-%d",
ds->index);
- priv->slave_mii_bus->dev.of_node = mdio_np;
- priv->slave_mii_bus->parent = priv->dev;
- ds->slave_mii_bus = priv->slave_mii_bus;
+ priv->user_mii_bus->dev.of_node = mdio_np;
+ priv->user_mii_bus->parent = priv->dev;
+ ds->user_mii_bus = priv->user_mii_bus;
- ret = devm_of_mdiobus_register(priv->dev, priv->slave_mii_bus, mdio_np);
+ ret = devm_of_mdiobus_register(priv->dev, priv->user_mii_bus, mdio_np);
if (ret) {
dev_err(priv->dev, "unable to register MDIO bus %s\n",
- priv->slave_mii_bus->id);
+ priv->user_mii_bus->id);
goto err_put_node;
}
@@ -506,22 +506,20 @@ static int realtek_smi_probe(struct platform_device *pdev)
return 0;
}
-static int realtek_smi_remove(struct platform_device *pdev)
+static void realtek_smi_remove(struct platform_device *pdev)
{
struct realtek_priv *priv = platform_get_drvdata(pdev);
if (!priv)
- return 0;
+ return;
dsa_unregister_switch(priv->ds);
- if (priv->slave_mii_bus)
- of_node_put(priv->slave_mii_bus->dev.of_node);
+ if (priv->user_mii_bus)
+ of_node_put(priv->user_mii_bus->dev.of_node);
/* leave the device reset asserted */
if (priv->reset)
gpiod_set_value(priv->reset, 1);
-
- return 0;
}
static void realtek_smi_shutdown(struct platform_device *pdev)
@@ -559,7 +557,7 @@ static struct platform_driver realtek_smi_driver = {
.of_match_table = realtek_smi_of_match,
},
.probe = realtek_smi_probe,
- .remove = realtek_smi_remove,
+ .remove_new = realtek_smi_remove,
.shutdown = realtek_smi_shutdown,
};
module_platform_driver(realtek_smi_driver);
diff --git a/drivers/net/dsa/realtek/realtek.h b/drivers/net/dsa/realtek/realtek.h
index 4fa7c6ba87..790488e9c6 100644
--- a/drivers/net/dsa/realtek/realtek.h
+++ b/drivers/net/dsa/realtek/realtek.h
@@ -54,7 +54,7 @@ struct realtek_priv {
struct regmap *map;
struct regmap *map_nolock;
struct mutex map_lock;
- struct mii_bus *slave_mii_bus;
+ struct mii_bus *user_mii_bus;
struct mii_bus *bus;
int mdio_addr;
diff --git a/drivers/net/dsa/realtek/rtl8365mb.c b/drivers/net/dsa/realtek/rtl8365mb.c
index 41ea3b5a42..0875e4fc9f 100644
--- a/drivers/net/dsa/realtek/rtl8365mb.c
+++ b/drivers/net/dsa/realtek/rtl8365mb.c
@@ -1144,7 +1144,7 @@ static int rtl8365mb_port_change_mtu(struct dsa_switch *ds, int port,
int frame_size;
/* When a new MTU is set, DSA always sets the CPU port's MTU to the
- * largest MTU of the slave ports. Because the switch only has a global
+ * largest MTU of the user ports. Because the switch only has a global
* RX length register, only allowing CPU port here is enough.
*/
if (!dsa_is_cpu_port(ds, port))
@@ -1303,8 +1303,7 @@ static void rtl8365mb_get_strings(struct dsa_switch *ds, int port, u32 stringset
for (i = 0; i < RTL8365MB_MIB_END; i++) {
struct rtl8365mb_mib_counter *mib = &rtl8365mb_mib_counters[i];
-
- strncpy(data + i * ETH_GSTRING_LEN, mib->name, ETH_GSTRING_LEN);
+ ethtool_sprintf(&data, "%s", mib->name);
}
}
diff --git a/drivers/net/dsa/realtek/rtl8366-core.c b/drivers/net/dsa/realtek/rtl8366-core.c
index dc5f75be30..82e267b8fd 100644
--- a/drivers/net/dsa/realtek/rtl8366-core.c
+++ b/drivers/net/dsa/realtek/rtl8366-core.c
@@ -395,17 +395,13 @@ void rtl8366_get_strings(struct dsa_switch *ds, int port, u32 stringset,
uint8_t *data)
{
struct realtek_priv *priv = ds->priv;
- struct rtl8366_mib_counter *mib;
int i;
if (port >= priv->num_ports)
return;
- for (i = 0; i < priv->num_mib_counters; i++) {
- mib = &priv->mib_counters[i];
- strncpy(data + i * ETH_GSTRING_LEN,
- mib->name, ETH_GSTRING_LEN);
- }
+ for (i = 0; i < priv->num_mib_counters; i++)
+ ethtool_sprintf(&data, "%s", priv->mib_counters[i].name);
}
EXPORT_SYMBOL_GPL(rtl8366_get_strings);
diff --git a/drivers/net/dsa/realtek/rtl8366rb.c b/drivers/net/dsa/realtek/rtl8366rb.c
index 7868ef237f..b39b719a5b 100644
--- a/drivers/net/dsa/realtek/rtl8366rb.c
+++ b/drivers/net/dsa/realtek/rtl8366rb.c
@@ -95,12 +95,6 @@
#define RTL8366RB_PAACR_RX_PAUSE BIT(6)
#define RTL8366RB_PAACR_AN BIT(7)
-#define RTL8366RB_PAACR_CPU_PORT (RTL8366RB_PAACR_SPEED_1000M | \
- RTL8366RB_PAACR_FULL_DUPLEX | \
- RTL8366RB_PAACR_LINK_UP | \
- RTL8366RB_PAACR_TX_PAUSE | \
- RTL8366RB_PAACR_RX_PAUSE)
-
/* bits 0..7 = port 0, bits 8..15 = port 1 */
#define RTL8366RB_PSTAT0 0x0014
/* bits 0..7 = port 2, bits 8..15 = port 3 */
@@ -1081,29 +1075,61 @@ rtl8366rb_mac_link_up(struct dsa_switch *ds, int port, unsigned int mode,
int speed, int duplex, bool tx_pause, bool rx_pause)
{
struct realtek_priv *priv = ds->priv;
+ unsigned int val;
int ret;
+ /* Allow forcing the mode on the fixed CPU port, no autonegotiation.
+ * We assume autonegotiation works on the PHY-facing ports.
+ */
if (port != priv->cpu_port)
return;
dev_dbg(priv->dev, "MAC link up on CPU port (%d)\n", port);
- /* Force the fixed CPU port into 1Gbit mode, no autonegotiation */
ret = regmap_update_bits(priv->map, RTL8366RB_MAC_FORCE_CTRL_REG,
BIT(port), BIT(port));
if (ret) {
- dev_err(priv->dev, "failed to force 1Gbit on CPU port\n");
+ dev_err(priv->dev, "failed to force CPU port\n");
return;
}
+ /* Conjure port config */
+ switch (speed) {
+ case SPEED_10:
+ val = RTL8366RB_PAACR_SPEED_10M;
+ break;
+ case SPEED_100:
+ val = RTL8366RB_PAACR_SPEED_100M;
+ break;
+ case SPEED_1000:
+ val = RTL8366RB_PAACR_SPEED_1000M;
+ break;
+ default:
+ val = RTL8366RB_PAACR_SPEED_1000M;
+ break;
+ }
+
+ if (duplex == DUPLEX_FULL)
+ val |= RTL8366RB_PAACR_FULL_DUPLEX;
+
+ if (tx_pause)
+ val |= RTL8366RB_PAACR_TX_PAUSE;
+
+ if (rx_pause)
+ val |= RTL8366RB_PAACR_RX_PAUSE;
+
+ val |= RTL8366RB_PAACR_LINK_UP;
+
ret = regmap_update_bits(priv->map, RTL8366RB_PAACR2,
0xFF00U,
- RTL8366RB_PAACR_CPU_PORT << 8);
+ val << 8);
if (ret) {
dev_err(priv->dev, "failed to set PAACR on CPU port\n");
return;
}
+ dev_dbg(priv->dev, "set PAACR to %04x\n", val);
+
/* Enable the CPU port */
ret = regmap_update_bits(priv->map, RTL8366RB_PECR, BIT(port),
0);
diff --git a/drivers/net/dsa/rzn1_a5psw.c b/drivers/net/dsa/rzn1_a5psw.c
index 2eda10b33f..10092ea85e 100644
--- a/drivers/net/dsa/rzn1_a5psw.c
+++ b/drivers/net/dsa/rzn1_a5psw.c
@@ -1272,19 +1272,17 @@ free_pcs:
return ret;
}
-static int a5psw_remove(struct platform_device *pdev)
+static void a5psw_remove(struct platform_device *pdev)
{
struct a5psw *a5psw = platform_get_drvdata(pdev);
if (!a5psw)
- return 0;
+ return;
dsa_unregister_switch(&a5psw->ds);
a5psw_pcs_free(a5psw);
clk_disable_unprepare(a5psw->hclk);
clk_disable_unprepare(a5psw->clk);
-
- return 0;
}
static void a5psw_shutdown(struct platform_device *pdev)
@@ -1311,7 +1309,7 @@ static struct platform_driver a5psw_driver = {
.of_match_table = a5psw_of_mtable,
},
.probe = a5psw_probe,
- .remove = a5psw_remove,
+ .remove_new = a5psw_remove,
.shutdown = a5psw_shutdown,
};
module_platform_driver(a5psw_driver);
diff --git a/drivers/net/dsa/sja1105/sja1105_clocking.c b/drivers/net/dsa/sja1105/sja1105_clocking.c
index e3699f76f6..08a3e7b962 100644
--- a/drivers/net/dsa/sja1105/sja1105_clocking.c
+++ b/drivers/net/dsa/sja1105/sja1105_clocking.c
@@ -153,14 +153,14 @@ static int sja1105_cgu_mii_tx_clk_config(struct sja1105_private *priv,
{
const struct sja1105_regs *regs = priv->info->regs;
struct sja1105_cgu_mii_ctrl mii_tx_clk;
- const int mac_clk_sources[] = {
+ static const int mac_clk_sources[] = {
CLKSRC_MII0_TX_CLK,
CLKSRC_MII1_TX_CLK,
CLKSRC_MII2_TX_CLK,
CLKSRC_MII3_TX_CLK,
CLKSRC_MII4_TX_CLK,
};
- const int phy_clk_sources[] = {
+ static const int phy_clk_sources[] = {
CLKSRC_IDIV0,
CLKSRC_IDIV1,
CLKSRC_IDIV2,
@@ -194,7 +194,7 @@ sja1105_cgu_mii_rx_clk_config(struct sja1105_private *priv, int port)
const struct sja1105_regs *regs = priv->info->regs;
struct sja1105_cgu_mii_ctrl mii_rx_clk;
u8 packed_buf[SJA1105_SIZE_CGU_CMD] = {0};
- const int clk_sources[] = {
+ static const int clk_sources[] = {
CLKSRC_MII0_RX_CLK,
CLKSRC_MII1_RX_CLK,
CLKSRC_MII2_RX_CLK,
@@ -221,7 +221,7 @@ sja1105_cgu_mii_ext_tx_clk_config(struct sja1105_private *priv, int port)
const struct sja1105_regs *regs = priv->info->regs;
struct sja1105_cgu_mii_ctrl mii_ext_tx_clk;
u8 packed_buf[SJA1105_SIZE_CGU_CMD] = {0};
- const int clk_sources[] = {
+ static const int clk_sources[] = {
CLKSRC_IDIV0,
CLKSRC_IDIV1,
CLKSRC_IDIV2,
@@ -248,7 +248,7 @@ sja1105_cgu_mii_ext_rx_clk_config(struct sja1105_private *priv, int port)
const struct sja1105_regs *regs = priv->info->regs;
struct sja1105_cgu_mii_ctrl mii_ext_rx_clk;
u8 packed_buf[SJA1105_SIZE_CGU_CMD] = {0};
- const int clk_sources[] = {
+ static const int clk_sources[] = {
CLKSRC_IDIV0,
CLKSRC_IDIV1,
CLKSRC_IDIV2,
@@ -349,8 +349,13 @@ static int sja1105_cgu_rgmii_tx_clk_config(struct sja1105_private *priv,
if (speed == priv->info->port_speed[SJA1105_SPEED_1000MBPS]) {
clksrc = CLKSRC_PLL0;
} else {
- int clk_sources[] = {CLKSRC_IDIV0, CLKSRC_IDIV1, CLKSRC_IDIV2,
- CLKSRC_IDIV3, CLKSRC_IDIV4};
+ static const int clk_sources[] = {
+ CLKSRC_IDIV0,
+ CLKSRC_IDIV1,
+ CLKSRC_IDIV2,
+ CLKSRC_IDIV3,
+ CLKSRC_IDIV4,
+ };
clksrc = clk_sources[port];
}
@@ -638,7 +643,7 @@ static int sja1105_cgu_rmii_ref_clk_config(struct sja1105_private *priv,
const struct sja1105_regs *regs = priv->info->regs;
struct sja1105_cgu_mii_ctrl ref_clk;
u8 packed_buf[SJA1105_SIZE_CGU_CMD] = {0};
- const int clk_sources[] = {
+ static const int clk_sources[] = {
CLKSRC_MII0_TX_CLK,
CLKSRC_MII1_TX_CLK,
CLKSRC_MII2_TX_CLK,
diff --git a/drivers/net/dsa/sja1105/sja1105_main.c b/drivers/net/dsa/sja1105/sja1105_main.c
index 1a367e64bc..74cee39d73 100644
--- a/drivers/net/dsa/sja1105/sja1105_main.c
+++ b/drivers/net/dsa/sja1105/sja1105_main.c
@@ -2688,7 +2688,7 @@ static int sja1105_mgmt_xmit(struct dsa_switch *ds, int port, int slot,
}
/* Transfer skb to the host port. */
- dsa_enqueue_skb(skb, dsa_to_port(ds, port)->slave);
+ dsa_enqueue_skb(skb, dsa_to_port(ds, port)->user);
/* Wait until the switch has processed the frame */
do {
@@ -3081,7 +3081,7 @@ static int sja1105_port_bridge_flags(struct dsa_switch *ds, int port,
* ref_clk pin. So port clocking needs to be initialized early, before
* connecting to PHYs is attempted, otherwise they won't respond through MDIO.
* Setting correct PHY link speed does not matter now.
- * But dsa_slave_phy_setup is called later than sja1105_setup, so the PHY
+ * But dsa_user_phy_setup is called later than sja1105_setup, so the PHY
* bindings are not yet parsed by DSA core. We need to parse early so that we
* can populate the xMII mode parameters table.
*/
diff --git a/drivers/net/dsa/vitesse-vsc73xx-core.c b/drivers/net/dsa/vitesse-vsc73xx-core.c
index c99fb1bd4c..571f037fe6 100644
--- a/drivers/net/dsa/vitesse-vsc73xx-core.c
+++ b/drivers/net/dsa/vitesse-vsc73xx-core.c
@@ -928,7 +928,8 @@ static void vsc73xx_get_strings(struct dsa_switch *ds, int port, u32 stringset,
const struct vsc73xx_counter *cnt;
struct vsc73xx *vsc = ds->priv;
u8 indices[6];
- int i, j;
+ u8 *buf = data;
+ int i;
u32 val;
int ret;
@@ -948,10 +949,7 @@ static void vsc73xx_get_strings(struct dsa_switch *ds, int port, u32 stringset,
indices[5] = ((val >> 26) & 0x1f); /* TX counter 2 */
/* The first counters is the RX octets */
- j = 0;
- strncpy(data + j * ETH_GSTRING_LEN,
- "RxEtherStatsOctets", ETH_GSTRING_LEN);
- j++;
+ ethtool_sprintf(&buf, "RxEtherStatsOctets");
/* Each port supports recording 3 RX counters and 3 TX counters,
* figure out what counters we use in this set-up and return the
@@ -961,23 +959,16 @@ static void vsc73xx_get_strings(struct dsa_switch *ds, int port, u32 stringset,
*/
for (i = 0; i < 3; i++) {
cnt = vsc73xx_find_counter(vsc, indices[i], false);
- if (cnt)
- strncpy(data + j * ETH_GSTRING_LEN,
- cnt->name, ETH_GSTRING_LEN);
- j++;
+ ethtool_sprintf(&buf, "%s", cnt ? cnt->name : "");
}
/* TX stats begins with the number of TX octets */
- strncpy(data + j * ETH_GSTRING_LEN,
- "TxEtherStatsOctets", ETH_GSTRING_LEN);
- j++;
+ ethtool_sprintf(&buf, "TxEtherStatsOctets");
for (i = 3; i < 6; i++) {
cnt = vsc73xx_find_counter(vsc, indices[i], true);
- if (cnt)
- strncpy(data + j * ETH_GSTRING_LEN,
- cnt->name, ETH_GSTRING_LEN);
- j++;
+ ethtool_sprintf(&buf, "%s", cnt ? cnt->name : "");
+
}
}
@@ -1037,6 +1028,31 @@ static int vsc73xx_get_max_mtu(struct dsa_switch *ds, int port)
return 9600 - ETH_HLEN - ETH_FCS_LEN;
}
+static void vsc73xx_phylink_get_caps(struct dsa_switch *dsa, int port,
+ struct phylink_config *config)
+{
+ unsigned long *interfaces = config->supported_interfaces;
+
+ if (port == 5)
+ return;
+
+ if (port == CPU_PORT) {
+ __set_bit(PHY_INTERFACE_MODE_MII, interfaces);
+ __set_bit(PHY_INTERFACE_MODE_REVMII, interfaces);
+ __set_bit(PHY_INTERFACE_MODE_GMII, interfaces);
+ __set_bit(PHY_INTERFACE_MODE_RGMII, interfaces);
+ }
+
+ if (port <= 4) {
+ /* Internal PHYs */
+ __set_bit(PHY_INTERFACE_MODE_INTERNAL, interfaces);
+ /* phylib default */
+ __set_bit(PHY_INTERFACE_MODE_GMII, interfaces);
+ }
+
+ config->mac_capabilities = MAC_SYM_PAUSE | MAC_10 | MAC_100 | MAC_1000;
+}
+
static const struct dsa_switch_ops vsc73xx_ds_ops = {
.get_tag_protocol = vsc73xx_get_tag_protocol,
.setup = vsc73xx_setup,
@@ -1050,6 +1066,7 @@ static const struct dsa_switch_ops vsc73xx_ds_ops = {
.port_disable = vsc73xx_port_disable,
.port_change_mtu = vsc73xx_change_mtu,
.port_max_mtu = vsc73xx_get_max_mtu,
+ .phylink_get_caps = vsc73xx_phylink_get_caps,
};
static int vsc73xx_gpio_get(struct gpio_chip *chip, unsigned int offset)
diff --git a/drivers/net/dsa/vitesse-vsc73xx-platform.c b/drivers/net/dsa/vitesse-vsc73xx-platform.c
index bd4206e8f9..755b7895a1 100644
--- a/drivers/net/dsa/vitesse-vsc73xx-platform.c
+++ b/drivers/net/dsa/vitesse-vsc73xx-platform.c
@@ -112,16 +112,14 @@ static int vsc73xx_platform_probe(struct platform_device *pdev)
return vsc73xx_probe(&vsc_platform->vsc);
}
-static int vsc73xx_platform_remove(struct platform_device *pdev)
+static void vsc73xx_platform_remove(struct platform_device *pdev)
{
struct vsc73xx_platform *vsc_platform = platform_get_drvdata(pdev);
if (!vsc_platform)
- return 0;
+ return;
vsc73xx_remove(&vsc_platform->vsc);
-
- return 0;
}
static void vsc73xx_platform_shutdown(struct platform_device *pdev)
@@ -160,7 +158,7 @@ MODULE_DEVICE_TABLE(of, vsc73xx_of_match);
static struct platform_driver vsc73xx_platform_driver = {
.probe = vsc73xx_platform_probe,
- .remove = vsc73xx_platform_remove,
+ .remove_new = vsc73xx_platform_remove,
.shutdown = vsc73xx_platform_shutdown,
.driver = {
.name = "vsc73xx-platform",
diff --git a/drivers/net/dsa/xrs700x/xrs700x.c b/drivers/net/dsa/xrs700x/xrs700x.c
index 753fef757f..96db032b47 100644
--- a/drivers/net/dsa/xrs700x/xrs700x.c
+++ b/drivers/net/dsa/xrs700x/xrs700x.c
@@ -548,12 +548,13 @@ static void xrs700x_bridge_leave(struct dsa_switch *ds, int port,
}
static int xrs700x_hsr_join(struct dsa_switch *ds, int port,
- struct net_device *hsr)
+ struct net_device *hsr,
+ struct netlink_ext_ack *extack)
{
unsigned int val = XRS_HSR_CFG_HSR_PRP;
struct dsa_port *partner = NULL, *dp;
struct xrs700x *priv = ds->priv;
- struct net_device *slave;
+ struct net_device *user;
int ret, i, hsr_pair[2];
enum hsr_version ver;
bool fwd = false;
@@ -562,16 +563,21 @@ static int xrs700x_hsr_join(struct dsa_switch *ds, int port,
if (ret)
return ret;
- /* Only ports 1 and 2 can be HSR/PRP redundant ports. */
- if (port != 1 && port != 2)
+ if (port != 1 && port != 2) {
+ NL_SET_ERR_MSG_MOD(extack,
+ "Only ports 1 and 2 can offload HSR/PRP");
return -EOPNOTSUPP;
+ }
- if (ver == HSR_V1)
+ if (ver == HSR_V1) {
val |= XRS_HSR_CFG_HSR;
- else if (ver == PRP_V1)
+ } else if (ver == PRP_V1) {
val |= XRS_HSR_CFG_PRP;
- else
+ } else {
+ NL_SET_ERR_MSG_MOD(extack,
+ "Only HSR v1 and PRP v1 can be offloaded");
return -EOPNOTSUPP;
+ }
dsa_hsr_foreach_port(dp, ds, hsr) {
if (dp->index != port) {
@@ -632,8 +638,8 @@ static int xrs700x_hsr_join(struct dsa_switch *ds, int port,
hsr_pair[0] = port;
hsr_pair[1] = partner->index;
for (i = 0; i < ARRAY_SIZE(hsr_pair); i++) {
- slave = dsa_to_port(ds, hsr_pair[i])->slave;
- slave->features |= XRS7000X_SUPPORTED_HSR_FEATURES;
+ user = dsa_to_port(ds, hsr_pair[i])->user;
+ user->features |= XRS7000X_SUPPORTED_HSR_FEATURES;
}
return 0;
@@ -644,7 +650,7 @@ static int xrs700x_hsr_leave(struct dsa_switch *ds, int port,
{
struct dsa_port *partner = NULL, *dp;
struct xrs700x *priv = ds->priv;
- struct net_device *slave;
+ struct net_device *user;
int i, hsr_pair[2];
unsigned int val;
@@ -686,8 +692,8 @@ static int xrs700x_hsr_leave(struct dsa_switch *ds, int port,
hsr_pair[0] = port;
hsr_pair[1] = partner->index;
for (i = 0; i < ARRAY_SIZE(hsr_pair); i++) {
- slave = dsa_to_port(ds, hsr_pair[i])->slave;
- slave->features &= ~XRS7000X_SUPPORTED_HSR_FEATURES;
+ user = dsa_to_port(ds, hsr_pair[i])->user;
+ user->features &= ~XRS7000X_SUPPORTED_HSR_FEATURES;
}
return 0;