diff options
Diffstat (limited to 'drivers/net/ethernet/atheros/atlx/atl1.h')
| -rw-r--r-- | drivers/net/ethernet/atheros/atlx/atl1.h | 790 |
1 files changed, 790 insertions, 0 deletions
diff --git a/drivers/net/ethernet/atheros/atlx/atl1.h b/drivers/net/ethernet/atheros/atlx/atl1.h new file mode 100644 index 0000000000..6b264c5127 --- /dev/null +++ b/drivers/net/ethernet/atheros/atlx/atl1.h @@ -0,0 +1,790 @@ +/* SPDX-License-Identifier: GPL-2.0-or-later */ +/* + * Copyright(c) 2005 - 2006 Attansic Corporation. All rights reserved. + * Copyright(c) 2006 - 2007 Chris Snook <csnook@redhat.com> + * Copyright(c) 2006 - 2008 Jay Cliburn <jcliburn@gmail.com> + * + * Derived from Intel e1000 driver + * Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved. + */ + +#ifndef ATL1_H +#define ATL1_H + +#include <linux/compiler.h> +#include <linux/ethtool.h> +#include <linux/if_vlan.h> +#include <linux/mii.h> +#include <linux/module.h> +#include <linux/skbuff.h> +#include <linux/spinlock.h> +#include <linux/timer.h> +#include <linux/types.h> +#include <linux/workqueue.h> + +#include "atlx.h" + +#define ATLX_DRIVER_NAME "atl1" + +MODULE_DESCRIPTION("Atheros L1 Gigabit Ethernet Driver"); + +#define atlx_adapter atl1_adapter +#define atlx_check_for_link atl1_check_for_link +#define atlx_check_link atl1_check_link +#define atlx_hash_mc_addr atl1_hash_mc_addr +#define atlx_hash_set atl1_hash_set +#define atlx_hw atl1_hw +#define atlx_mii_ioctl atl1_mii_ioctl +#define atlx_read_phy_reg atl1_read_phy_reg +#define atlx_set_mac atl1_set_mac +#define atlx_set_mac_addr atl1_set_mac_addr + +struct atl1_adapter; +struct atl1_hw; + +/* function prototypes needed by multiple files */ +static u32 atl1_hash_mc_addr(struct atl1_hw *hw, u8 *mc_addr); +static void atl1_hash_set(struct atl1_hw *hw, u32 hash_value); +static void atl1_set_mac_addr(struct atl1_hw *hw); +static int atl1_mii_ioctl(struct net_device *netdev, struct ifreq *ifr, + int cmd); +static u32 atl1_check_link(struct atl1_adapter *adapter); + +/* hardware definitions specific to L1 */ + +/* Block IDLE Status Register */ +#define IDLE_STATUS_RXMAC 0x1 +#define IDLE_STATUS_TXMAC 0x2 +#define IDLE_STATUS_RXQ 0x4 +#define IDLE_STATUS_TXQ 0x8 +#define IDLE_STATUS_DMAR 0x10 +#define IDLE_STATUS_DMAW 0x20 +#define IDLE_STATUS_SMB 0x40 +#define IDLE_STATUS_CMB 0x80 + +/* MDIO Control Register */ +#define MDIO_WAIT_TIMES 30 + +/* MAC Control Register */ +#define MAC_CTRL_TX_PAUSE 0x10000 +#define MAC_CTRL_SCNT 0x20000 +#define MAC_CTRL_SRST_TX 0x40000 +#define MAC_CTRL_TX_SIMURST 0x80000 +#define MAC_CTRL_SPEED_SHIFT 20 +#define MAC_CTRL_SPEED_MASK 0x300000 +#define MAC_CTRL_SPEED_1000 0x2 +#define MAC_CTRL_SPEED_10_100 0x1 +#define MAC_CTRL_DBG_TX_BKPRESURE 0x400000 +#define MAC_CTRL_TX_HUGE 0x800000 +#define MAC_CTRL_RX_CHKSUM_EN 0x1000000 +#define MAC_CTRL_DBG 0x8000000 + +/* Wake-On-Lan control register */ +#define WOL_CLK_SWITCH_EN 0x8000 +#define WOL_PT5_EN 0x200000 +#define WOL_PT6_EN 0x400000 +#define WOL_PT5_MATCH 0x8000000 +#define WOL_PT6_MATCH 0x10000000 + +/* WOL Length ( 2 DWORD ) */ +#define REG_WOL_PATTERN_LEN 0x14A4 +#define WOL_PT_LEN_MASK 0x7F +#define WOL_PT0_LEN_SHIFT 0 +#define WOL_PT1_LEN_SHIFT 8 +#define WOL_PT2_LEN_SHIFT 16 +#define WOL_PT3_LEN_SHIFT 24 +#define WOL_PT4_LEN_SHIFT 0 +#define WOL_PT5_LEN_SHIFT 8 +#define WOL_PT6_LEN_SHIFT 16 + +/* Internal SRAM Partition Registers, low 32 bits */ +#define REG_SRAM_RFD_LEN 0x1504 +#define REG_SRAM_RRD_ADDR 0x1508 +#define REG_SRAM_RRD_LEN 0x150C +#define REG_SRAM_TPD_ADDR 0x1510 +#define REG_SRAM_TPD_LEN 0x1514 +#define REG_SRAM_TRD_ADDR 0x1518 +#define REG_SRAM_TRD_LEN 0x151C +#define REG_SRAM_RXF_ADDR 0x1520 +#define REG_SRAM_RXF_LEN 0x1524 +#define REG_SRAM_TXF_ADDR 0x1528 +#define REG_SRAM_TXF_LEN 0x152C +#define REG_SRAM_TCPH_PATH_ADDR 0x1530 +#define SRAM_TCPH_ADDR_MASK 0xFFF +#define SRAM_TCPH_ADDR_SHIFT 0 +#define SRAM_PATH_ADDR_MASK 0xFFF +#define SRAM_PATH_ADDR_SHIFT 16 + +/* Load Ptr Register */ +#define REG_LOAD_PTR 0x1534 + +/* Descriptor Control registers, low 32 bits */ +#define REG_DESC_RFD_ADDR_LO 0x1544 +#define REG_DESC_RRD_ADDR_LO 0x1548 +#define REG_DESC_TPD_ADDR_LO 0x154C +#define REG_DESC_CMB_ADDR_LO 0x1550 +#define REG_DESC_SMB_ADDR_LO 0x1554 +#define REG_DESC_RFD_RRD_RING_SIZE 0x1558 +#define DESC_RFD_RING_SIZE_MASK 0x7FF +#define DESC_RFD_RING_SIZE_SHIFT 0 +#define DESC_RRD_RING_SIZE_MASK 0x7FF +#define DESC_RRD_RING_SIZE_SHIFT 16 +#define REG_DESC_TPD_RING_SIZE 0x155C +#define DESC_TPD_RING_SIZE_MASK 0x3FF +#define DESC_TPD_RING_SIZE_SHIFT 0 + +/* TXQ Control Register */ +#define REG_TXQ_CTRL 0x1580 +#define TXQ_CTRL_TPD_BURST_NUM_SHIFT 0 +#define TXQ_CTRL_TPD_BURST_NUM_MASK 0x1F +#define TXQ_CTRL_EN 0x20 +#define TXQ_CTRL_ENH_MODE 0x40 +#define TXQ_CTRL_TPD_FETCH_TH_SHIFT 8 +#define TXQ_CTRL_TPD_FETCH_TH_MASK 0x3F +#define TXQ_CTRL_TXF_BURST_NUM_SHIFT 16 +#define TXQ_CTRL_TXF_BURST_NUM_MASK 0xFFFF + +/* Jumbo packet Threshold for task offload */ +#define REG_TX_JUMBO_TASK_TH_TPD_IPG 0x1584 +#define TX_JUMBO_TASK_TH_MASK 0x7FF +#define TX_JUMBO_TASK_TH_SHIFT 0 +#define TX_TPD_MIN_IPG_MASK 0x1F +#define TX_TPD_MIN_IPG_SHIFT 16 + +/* RXQ Control Register */ +#define REG_RXQ_CTRL 0x15A0 +#define RXQ_CTRL_RFD_BURST_NUM_SHIFT 0 +#define RXQ_CTRL_RFD_BURST_NUM_MASK 0xFF +#define RXQ_CTRL_RRD_BURST_THRESH_SHIFT 8 +#define RXQ_CTRL_RRD_BURST_THRESH_MASK 0xFF +#define RXQ_CTRL_RFD_PREF_MIN_IPG_SHIFT 16 +#define RXQ_CTRL_RFD_PREF_MIN_IPG_MASK 0x1F +#define RXQ_CTRL_CUT_THRU_EN 0x40000000 +#define RXQ_CTRL_EN 0x80000000 + +/* Rx jumbo packet threshold and rrd retirement timer */ +#define REG_RXQ_JMBOSZ_RRDTIM 0x15A4 +#define RXQ_JMBOSZ_TH_MASK 0x7FF +#define RXQ_JMBOSZ_TH_SHIFT 0 +#define RXQ_JMBO_LKAH_MASK 0xF +#define RXQ_JMBO_LKAH_SHIFT 11 +#define RXQ_RRD_TIMER_MASK 0xFFFF +#define RXQ_RRD_TIMER_SHIFT 16 + +/* RFD flow control register */ +#define REG_RXQ_RXF_PAUSE_THRESH 0x15A8 +#define RXQ_RXF_PAUSE_TH_HI_SHIFT 16 +#define RXQ_RXF_PAUSE_TH_HI_MASK 0xFFF +#define RXQ_RXF_PAUSE_TH_LO_SHIFT 0 +#define RXQ_RXF_PAUSE_TH_LO_MASK 0xFFF + +/* RRD flow control register */ +#define REG_RXQ_RRD_PAUSE_THRESH 0x15AC +#define RXQ_RRD_PAUSE_TH_HI_SHIFT 0 +#define RXQ_RRD_PAUSE_TH_HI_MASK 0xFFF +#define RXQ_RRD_PAUSE_TH_LO_SHIFT 16 +#define RXQ_RRD_PAUSE_TH_LO_MASK 0xFFF + +/* DMA Engine Control Register */ +#define REG_DMA_CTRL 0x15C0 +#define DMA_CTRL_DMAR_IN_ORDER 0x1 +#define DMA_CTRL_DMAR_ENH_ORDER 0x2 +#define DMA_CTRL_DMAR_OUT_ORDER 0x4 +#define DMA_CTRL_RCB_VALUE 0x8 +#define DMA_CTRL_DMAR_BURST_LEN_SHIFT 4 +#define DMA_CTRL_DMAR_BURST_LEN_MASK 7 +#define DMA_CTRL_DMAW_BURST_LEN_SHIFT 7 +#define DMA_CTRL_DMAW_BURST_LEN_MASK 7 +#define DMA_CTRL_DMAR_EN 0x400 +#define DMA_CTRL_DMAW_EN 0x800 + +/* CMB/SMB Control Register */ +#define REG_CSMB_CTRL 0x15D0 +#define CSMB_CTRL_CMB_NOW 1 +#define CSMB_CTRL_SMB_NOW 2 +#define CSMB_CTRL_CMB_EN 4 +#define CSMB_CTRL_SMB_EN 8 + +/* CMB DMA Write Threshold Register */ +#define REG_CMB_WRITE_TH 0x15D4 +#define CMB_RRD_TH_SHIFT 0 +#define CMB_RRD_TH_MASK 0x7FF +#define CMB_TPD_TH_SHIFT 16 +#define CMB_TPD_TH_MASK 0x7FF + +/* RX/TX count-down timer to trigger CMB-write. 2us resolution. */ +#define REG_CMB_WRITE_TIMER 0x15D8 +#define CMB_RX_TM_SHIFT 0 +#define CMB_RX_TM_MASK 0xFFFF +#define CMB_TX_TM_SHIFT 16 +#define CMB_TX_TM_MASK 0xFFFF + +/* Number of packet received since last CMB write */ +#define REG_CMB_RX_PKT_CNT 0x15DC + +/* Number of packet transmitted since last CMB write */ +#define REG_CMB_TX_PKT_CNT 0x15E0 + +/* SMB auto DMA timer register */ +#define REG_SMB_TIMER 0x15E4 + +/* Mailbox Register */ +#define REG_MAILBOX 0x15F0 +#define MB_RFD_PROD_INDX_SHIFT 0 +#define MB_RFD_PROD_INDX_MASK 0x7FF +#define MB_RRD_CONS_INDX_SHIFT 11 +#define MB_RRD_CONS_INDX_MASK 0x7FF +#define MB_TPD_PROD_INDX_SHIFT 22 +#define MB_TPD_PROD_INDX_MASK 0x3FF + +/* Interrupt Status Register */ +#define ISR_SMB 0x1 +#define ISR_TIMER 0x2 +#define ISR_MANUAL 0x4 +#define ISR_RXF_OV 0x8 +#define ISR_RFD_UNRUN 0x10 +#define ISR_RRD_OV 0x20 +#define ISR_TXF_UNRUN 0x40 +#define ISR_LINK 0x80 +#define ISR_HOST_RFD_UNRUN 0x100 +#define ISR_HOST_RRD_OV 0x200 +#define ISR_DMAR_TO_RST 0x400 +#define ISR_DMAW_TO_RST 0x800 +#define ISR_GPHY 0x1000 +#define ISR_RX_PKT 0x10000 +#define ISR_TX_PKT 0x20000 +#define ISR_TX_DMA 0x40000 +#define ISR_RX_DMA 0x80000 +#define ISR_CMB_RX 0x100000 +#define ISR_CMB_TX 0x200000 +#define ISR_MAC_RX 0x400000 +#define ISR_MAC_TX 0x800000 +#define ISR_DIS_SMB 0x20000000 +#define ISR_DIS_DMA 0x40000000 + +/* Normal Interrupt mask without RX/TX enabled */ +#define IMR_NORXTX_MASK (\ + ISR_SMB |\ + ISR_GPHY |\ + ISR_PHY_LINKDOWN|\ + ISR_DMAR_TO_RST |\ + ISR_DMAW_TO_RST) + +/* Normal Interrupt mask */ +#define IMR_NORMAL_MASK (\ + IMR_NORXTX_MASK |\ + ISR_CMB_TX |\ + ISR_CMB_RX) + +/* Debug Interrupt Mask (enable all interrupt) */ +#define IMR_DEBUG_MASK (\ + ISR_SMB |\ + ISR_TIMER |\ + ISR_MANUAL |\ + ISR_RXF_OV |\ + ISR_RFD_UNRUN |\ + ISR_RRD_OV |\ + ISR_TXF_UNRUN |\ + ISR_LINK |\ + ISR_CMB_TX |\ + ISR_CMB_RX |\ + ISR_RX_PKT |\ + ISR_TX_PKT |\ + ISR_MAC_RX |\ + ISR_MAC_TX) + +#define MEDIA_TYPE_1000M_FULL 1 +#define MEDIA_TYPE_100M_FULL 2 +#define MEDIA_TYPE_100M_HALF 3 +#define MEDIA_TYPE_10M_FULL 4 +#define MEDIA_TYPE_10M_HALF 5 + +#define AUTONEG_ADVERTISE_SPEED_DEFAULT 0x002F /* All but 1000-Half */ + +#define MAX_JUMBO_FRAME_SIZE 10240 + +#define ATL1_EEDUMP_LEN 48 + +/* Statistics counters collected by the MAC */ +struct stats_msg_block { + /* rx */ + u32 rx_ok; /* good RX packets */ + u32 rx_bcast; /* good RX broadcast packets */ + u32 rx_mcast; /* good RX multicast packets */ + u32 rx_pause; /* RX pause frames */ + u32 rx_ctrl; /* RX control packets other than pause frames */ + u32 rx_fcs_err; /* RX packets with bad FCS */ + u32 rx_len_err; /* RX packets with length != actual size */ + u32 rx_byte_cnt; /* good bytes received. FCS is NOT included */ + u32 rx_runt; /* RX packets < 64 bytes with good FCS */ + u32 rx_frag; /* RX packets < 64 bytes with bad FCS */ + u32 rx_sz_64; /* 64 byte RX packets */ + u32 rx_sz_65_127; + u32 rx_sz_128_255; + u32 rx_sz_256_511; + u32 rx_sz_512_1023; + u32 rx_sz_1024_1518; + u32 rx_sz_1519_max; /* 1519 byte to MTU RX packets */ + u32 rx_sz_ov; /* truncated RX packets > MTU */ + u32 rx_rxf_ov; /* frames dropped due to RX FIFO overflow */ + u32 rx_rrd_ov; /* frames dropped due to RRD overflow */ + u32 rx_align_err; /* alignment errors */ + u32 rx_bcast_byte_cnt; /* RX broadcast bytes, excluding FCS */ + u32 rx_mcast_byte_cnt; /* RX multicast bytes, excluding FCS */ + u32 rx_err_addr; /* packets dropped due to address filtering */ + + /* tx */ + u32 tx_ok; /* good TX packets */ + u32 tx_bcast; /* good TX broadcast packets */ + u32 tx_mcast; /* good TX multicast packets */ + u32 tx_pause; /* TX pause frames */ + u32 tx_exc_defer; /* TX packets deferred excessively */ + u32 tx_ctrl; /* TX control frames, excluding pause frames */ + u32 tx_defer; /* TX packets deferred */ + u32 tx_byte_cnt; /* bytes transmitted, FCS is NOT included */ + u32 tx_sz_64; /* 64 byte TX packets */ + u32 tx_sz_65_127; + u32 tx_sz_128_255; + u32 tx_sz_256_511; + u32 tx_sz_512_1023; + u32 tx_sz_1024_1518; + u32 tx_sz_1519_max; /* 1519 byte to MTU TX packets */ + u32 tx_1_col; /* packets TX after a single collision */ + u32 tx_2_col; /* packets TX after multiple collisions */ + u32 tx_late_col; /* TX packets with late collisions */ + u32 tx_abort_col; /* TX packets aborted w/excessive collisions */ + u32 tx_underrun; /* TX packets aborted due to TX FIFO underrun + * or TRD FIFO underrun */ + u32 tx_rd_eop; /* reads beyond the EOP into the next frame + * when TRD was not written timely */ + u32 tx_len_err; /* TX packets where length != actual size */ + u32 tx_trunc; /* TX packets truncated due to size > MTU */ + u32 tx_bcast_byte; /* broadcast bytes transmitted, excluding FCS */ + u32 tx_mcast_byte; /* multicast bytes transmitted, excluding FCS */ + u32 smb_updated; /* 1: SMB Updated. This is used by software to + * indicate the statistics update. Software + * should clear this bit after retrieving the + * statistics information. */ +}; + +/* Coalescing Message Block */ +struct coals_msg_block { + u32 int_stats; /* interrupt status */ + u16 rrd_prod_idx; /* TRD Producer Index. */ + u16 rfd_cons_idx; /* RFD Consumer Index. */ + u16 update; /* Selene sets this bit every time it DMAs the + * CMB to host memory. Software should clear + * this bit when CMB info is processed. */ + u16 tpd_cons_idx; /* TPD Consumer Index. */ +}; + +/* RRD descriptor */ +struct rx_return_desc { + u8 num_buf; /* Number of RFD buffers used by the received packet */ + u8 resved; + u16 buf_indx; /* RFD Index of the first buffer */ + union { + u32 valid; + struct { + u16 rx_chksum; + u16 pkt_size; + } xsum_sz; + } xsz; + + u16 pkt_flg; /* Packet flags */ + u16 err_flg; /* Error flags */ + u16 resved2; + u16 vlan_tag; /* VLAN TAG */ +}; + +#define PACKET_FLAG_ETH_TYPE 0x0080 +#define PACKET_FLAG_VLAN_INS 0x0100 +#define PACKET_FLAG_ERR 0x0200 +#define PACKET_FLAG_IPV4 0x0400 +#define PACKET_FLAG_UDP 0x0800 +#define PACKET_FLAG_TCP 0x1000 +#define PACKET_FLAG_BCAST 0x2000 +#define PACKET_FLAG_MCAST 0x4000 +#define PACKET_FLAG_PAUSE 0x8000 + +#define ERR_FLAG_CRC 0x0001 +#define ERR_FLAG_CODE 0x0002 +#define ERR_FLAG_DRIBBLE 0x0004 +#define ERR_FLAG_RUNT 0x0008 +#define ERR_FLAG_OV 0x0010 +#define ERR_FLAG_TRUNC 0x0020 +#define ERR_FLAG_IP_CHKSUM 0x0040 +#define ERR_FLAG_L4_CHKSUM 0x0080 +#define ERR_FLAG_LEN 0x0100 +#define ERR_FLAG_DES_ADDR 0x0200 + +/* RFD descriptor */ +struct rx_free_desc { + __le64 buffer_addr; /* Address of the descriptor's data buffer */ + __le16 buf_len; /* Size of the receive buffer in host memory */ + u16 coalese; /* Update consumer index to host after the + * reception of this frame */ + /* __packed is required */ +} __packed; + +/* + * The L1 transmit packet descriptor is comprised of four 32-bit words. + * + * 31 0 + * +---------------------------------------+ + * | Word 0: Buffer addr lo | + * +---------------------------------------+ + * | Word 1: Buffer addr hi | + * +---------------------------------------+ + * | Word 2 | + * +---------------------------------------+ + * | Word 3 | + * +---------------------------------------+ + * + * Words 0 and 1 combine to form a 64-bit buffer address. + * + * Word 2 is self explanatory in the #define block below. + * + * Word 3 has two forms, depending upon the state of bits 3 and 4. + * If bits 3 and 4 are both zero, then bits 14:31 are unused by the + * hardware. Otherwise, if either bit 3 or 4 is set, the definition + * of bits 14:31 vary according to the following depiction. + * + * 0 End of packet 0 End of packet + * 1 Coalesce 1 Coalesce + * 2 Insert VLAN tag 2 Insert VLAN tag + * 3 Custom csum enable = 0 3 Custom csum enable = 1 + * 4 Segment enable = 1 4 Segment enable = 0 + * 5 Generate IP checksum 5 Generate IP checksum + * 6 Generate TCP checksum 6 Generate TCP checksum + * 7 Generate UDP checksum 7 Generate UDP checksum + * 8 VLAN tagged 8 VLAN tagged + * 9 Ethernet frame type 9 Ethernet frame type + * 10-+ 10-+ + * 11 | IP hdr length (10:13) 11 | IP hdr length (10:13) + * 12 | (num 32-bit words) 12 | (num 32-bit words) + * 13-+ 13-+ + * 14-+ 14 Unused + * 15 | TCP hdr length (14:17) 15 Unused + * 16 | (num 32-bit words) 16-+ + * 17-+ 17 | + * 18 Header TPD flag 18 | + * 19-+ 19 | Payload offset + * 20 | 20 | (16:23) + * 21 | 21 | + * 22 | 22 | + * 23 | 23-+ + * 24 | 24-+ + * 25 | MSS (19:31) 25 | + * 26 | 26 | + * 27 | 27 | Custom csum offset + * 28 | 28 | (24:31) + * 29 | 29 | + * 30 | 30 | + * 31-+ 31-+ + */ + +/* tpd word 2 */ +#define TPD_BUFLEN_MASK 0x3FFF +#define TPD_BUFLEN_SHIFT 0 +#define TPD_DMAINT_MASK 0x0001 +#define TPD_DMAINT_SHIFT 14 +#define TPD_PKTNT_MASK 0x0001 +#define TPD_PKTINT_SHIFT 15 +#define TPD_VLANTAG_MASK 0xFFFF +#define TPD_VLANTAG_SHIFT 16 + +/* tpd word 3 bits 0:13 */ +#define TPD_EOP_MASK 0x0001 +#define TPD_EOP_SHIFT 0 +#define TPD_COALESCE_MASK 0x0001 +#define TPD_COALESCE_SHIFT 1 +#define TPD_INS_VL_TAG_MASK 0x0001 +#define TPD_INS_VL_TAG_SHIFT 2 +#define TPD_CUST_CSUM_EN_MASK 0x0001 +#define TPD_CUST_CSUM_EN_SHIFT 3 +#define TPD_SEGMENT_EN_MASK 0x0001 +#define TPD_SEGMENT_EN_SHIFT 4 +#define TPD_IP_CSUM_MASK 0x0001 +#define TPD_IP_CSUM_SHIFT 5 +#define TPD_TCP_CSUM_MASK 0x0001 +#define TPD_TCP_CSUM_SHIFT 6 +#define TPD_UDP_CSUM_MASK 0x0001 +#define TPD_UDP_CSUM_SHIFT 7 +#define TPD_VL_TAGGED_MASK 0x0001 +#define TPD_VL_TAGGED_SHIFT 8 +#define TPD_ETHTYPE_MASK 0x0001 +#define TPD_ETHTYPE_SHIFT 9 +#define TPD_IPHL_MASK 0x000F +#define TPD_IPHL_SHIFT 10 + +/* tpd word 3 bits 14:31 if segment enabled */ +#define TPD_TCPHDRLEN_MASK 0x000F +#define TPD_TCPHDRLEN_SHIFT 14 +#define TPD_HDRFLAG_MASK 0x0001 +#define TPD_HDRFLAG_SHIFT 18 +#define TPD_MSS_MASK 0x1FFF +#define TPD_MSS_SHIFT 19 + +/* tpd word 3 bits 16:31 if custom csum enabled */ +#define TPD_PLOADOFFSET_MASK 0x00FF +#define TPD_PLOADOFFSET_SHIFT 16 +#define TPD_CCSUMOFFSET_MASK 0x00FF +#define TPD_CCSUMOFFSET_SHIFT 24 + +struct tx_packet_desc { + __le64 buffer_addr; + __le32 word2; + __le32 word3; +}; + +/* DMA Order Settings */ +enum atl1_dma_order { + atl1_dma_ord_in = 1, + atl1_dma_ord_enh = 2, + atl1_dma_ord_out = 4 +}; + +enum atl1_dma_rcb { + atl1_rcb_64 = 0, + atl1_rcb_128 = 1 +}; + +enum atl1_dma_req_block { + atl1_dma_req_128 = 0, + atl1_dma_req_256 = 1, + atl1_dma_req_512 = 2, + atl1_dma_req_1024 = 3, + atl1_dma_req_2048 = 4, + atl1_dma_req_4096 = 5 +}; + +#define ATL1_MAX_INTR 3 +#define ATL1_MAX_TX_BUF_LEN 0x3000 /* 12288 bytes */ + +#define ATL1_DEFAULT_TPD 256 +#define ATL1_MAX_TPD 1024 +#define ATL1_MIN_TPD 64 +#define ATL1_DEFAULT_RFD 512 +#define ATL1_MIN_RFD 128 +#define ATL1_MAX_RFD 2048 +#define ATL1_REG_COUNT 1538 + +#define ATL1_GET_DESC(R, i, type) (&(((type *)((R)->desc))[i])) +#define ATL1_RFD_DESC(R, i) ATL1_GET_DESC(R, i, struct rx_free_desc) +#define ATL1_TPD_DESC(R, i) ATL1_GET_DESC(R, i, struct tx_packet_desc) +#define ATL1_RRD_DESC(R, i) ATL1_GET_DESC(R, i, struct rx_return_desc) + +/* + * atl1_ring_header represents a single, contiguous block of DMA space + * mapped for the three descriptor rings (tpd, rfd, rrd) and the two + * message blocks (cmb, smb) described below + */ +struct atl1_ring_header { + void *desc; /* virtual address */ + dma_addr_t dma; /* physical address*/ + unsigned int size; /* length in bytes */ +}; + +/* + * atl1_buffer is wrapper around a pointer to a socket buffer + * so a DMA handle can be stored along with the skb + */ +struct atl1_buffer { + struct sk_buff *skb; /* socket buffer */ + u16 length; /* rx buffer length */ + u16 alloced; /* 1 if skb allocated */ + dma_addr_t dma; +}; + +/* transmit packet descriptor (tpd) ring */ +struct atl1_tpd_ring { + void *desc; /* descriptor ring virtual address */ + dma_addr_t dma; /* descriptor ring physical address */ + u16 size; /* descriptor ring length in bytes */ + u16 count; /* number of descriptors in the ring */ + u16 hw_idx; /* hardware index */ + atomic_t next_to_clean; + atomic_t next_to_use; + struct atl1_buffer *buffer_info; +}; + +/* receive free descriptor (rfd) ring */ +struct atl1_rfd_ring { + void *desc; /* descriptor ring virtual address */ + dma_addr_t dma; /* descriptor ring physical address */ + u16 size; /* descriptor ring length in bytes */ + u16 count; /* number of descriptors in the ring */ + atomic_t next_to_use; + u16 next_to_clean; + struct atl1_buffer *buffer_info; +}; + +/* receive return descriptor (rrd) ring */ +struct atl1_rrd_ring { + void *desc; /* descriptor ring virtual address */ + dma_addr_t dma; /* descriptor ring physical address */ + unsigned int size; /* descriptor ring length in bytes */ + u16 count; /* number of descriptors in the ring */ + u16 next_to_use; + atomic_t next_to_clean; +}; + +/* coalescing message block (cmb) */ +struct atl1_cmb { + struct coals_msg_block *cmb; + dma_addr_t dma; +}; + +/* statistics message block (smb) */ +struct atl1_smb { + struct stats_msg_block *smb; + dma_addr_t dma; +}; + +/* Statistics counters */ +struct atl1_sft_stats { + u64 rx_packets; + u64 tx_packets; + u64 rx_bytes; + u64 tx_bytes; + u64 multicast; + u64 collisions; + u64 rx_errors; + u64 rx_length_errors; + u64 rx_crc_errors; + u64 rx_dropped; + u64 rx_frame_errors; + u64 rx_fifo_errors; + u64 rx_missed_errors; + u64 tx_errors; + u64 tx_fifo_errors; + u64 tx_aborted_errors; + u64 tx_window_errors; + u64 tx_carrier_errors; + u64 tx_pause; /* TX pause frames */ + u64 excecol; /* TX packets w/ excessive collisions */ + u64 deffer; /* TX packets deferred */ + u64 scc; /* packets TX after a single collision */ + u64 mcc; /* packets TX after multiple collisions */ + u64 latecol; /* TX packets w/ late collisions */ + u64 tx_underrun; /* TX packets aborted due to TX FIFO underrun + * or TRD FIFO underrun */ + u64 tx_trunc; /* TX packets truncated due to size > MTU */ + u64 rx_pause; /* num Pause packets received. */ + u64 rx_rrd_ov; + u64 rx_trunc; +}; + +/* hardware structure */ +struct atl1_hw { + u8 __iomem *hw_addr; + struct atl1_adapter *back; + enum atl1_dma_order dma_ord; + enum atl1_dma_rcb rcb_value; + enum atl1_dma_req_block dmar_block; + enum atl1_dma_req_block dmaw_block; + u8 preamble_len; + u8 max_retry; + u8 jam_ipg; /* IPG to start JAM for collision based flow + * control in half-duplex mode. In units of + * 8-bit time */ + u8 ipgt; /* Desired back to back inter-packet gap. + * The default is 96-bit time */ + u8 min_ifg; /* Minimum number of IFG to enforce in between + * receive frames. Frame gap below such IFP + * is dropped */ + u8 ipgr1; /* 64bit Carrier-Sense window */ + u8 ipgr2; /* 96-bit IPG window */ + u8 tpd_burst; /* Number of TPD to prefetch in cache-aligned + * burst. Each TPD is 16 bytes long */ + u8 rfd_burst; /* Number of RFD to prefetch in cache-aligned + * burst. Each RFD is 12 bytes long */ + u8 rfd_fetch_gap; + u8 rrd_burst; /* Threshold number of RRDs that can be retired + * in a burst. Each RRD is 16 bytes long */ + u8 tpd_fetch_th; + u8 tpd_fetch_gap; + u16 tx_jumbo_task_th; + u16 txf_burst; /* Number of data bytes to read in a cache- + * aligned burst. Each SRAM entry is 8 bytes */ + u16 rx_jumbo_th; /* Jumbo packet size for non-VLAN packet. VLAN + * packets should add 4 bytes */ + u16 rx_jumbo_lkah; + u16 rrd_ret_timer; /* RRD retirement timer. Decrement by 1 after + * every 512ns passes. */ + u16 lcol; /* Collision Window */ + + u16 cmb_tpd; + u16 cmb_rrd; + u16 cmb_rx_timer; + u16 cmb_tx_timer; + u32 smb_timer; + u16 media_type; + u16 autoneg_advertised; + + u16 mii_autoneg_adv_reg; + u16 mii_1000t_ctrl_reg; + + u32 max_frame_size; + u32 min_frame_size; + + u16 dev_rev; + + /* spi flash */ + u8 flash_vendor; + + u8 mac_addr[ETH_ALEN]; + u8 perm_mac_addr[ETH_ALEN]; + + bool phy_configured; +}; + +struct atl1_adapter { + struct net_device *netdev; + struct pci_dev *pdev; + + struct atl1_sft_stats soft_stats; + u32 rx_buffer_len; + u32 wol; + u16 link_speed; + u16 link_duplex; + spinlock_t lock; + struct napi_struct napi; + struct work_struct reset_dev_task; + struct work_struct link_chg_task; + + struct timer_list phy_config_timer; + bool phy_timer_pending; + + /* all descriptor rings' memory */ + struct atl1_ring_header ring_header; + + /* TX */ + struct atl1_tpd_ring tpd_ring; + spinlock_t mb_lock; + + /* RX */ + struct atl1_rfd_ring rfd_ring; + struct atl1_rrd_ring rrd_ring; + u64 hw_csum_err; + u64 hw_csum_good; + u32 msg_enable; + u16 imt; /* interrupt moderator timer (2us resolution) */ + u16 ict; /* interrupt clear timer (2us resolution */ + struct mii_if_info mii; /* MII interface info */ + + /* + * Use this value to check is napi handler allowed to + * enable ints or not + */ + bool int_enabled; + + u32 bd_number; /* board number */ + bool pci_using_64; + struct atl1_hw hw; + struct atl1_smb smb; + struct atl1_cmb cmb; +}; + +#endif /* ATL1_H */ |