diff options
Diffstat (limited to 'drivers/net/ethernet/broadcom/sb1250-mac.c')
| -rw-r--r-- | drivers/net/ethernet/broadcom/sb1250-mac.c | 2620 |
1 files changed, 2620 insertions, 0 deletions
diff --git a/drivers/net/ethernet/broadcom/sb1250-mac.c b/drivers/net/ethernet/broadcom/sb1250-mac.c new file mode 100644 index 0000000000..3a6763c5e8 --- /dev/null +++ b/drivers/net/ethernet/broadcom/sb1250-mac.c @@ -0,0 +1,2620 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright (C) 2001,2002,2003,2004 Broadcom Corporation + * Copyright (c) 2006, 2007 Maciej W. Rozycki + * + * This driver is designed for the Broadcom SiByte SOC built-in + * Ethernet controllers. Written by Mitch Lichtenberg at Broadcom Corp. + * + * Updated to the driver model and the PHY abstraction layer + * by Maciej W. Rozycki. + */ + +#include <linux/bug.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/string.h> +#include <linux/timer.h> +#include <linux/errno.h> +#include <linux/ioport.h> +#include <linux/slab.h> +#include <linux/interrupt.h> +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/skbuff.h> +#include <linux/bitops.h> +#include <linux/err.h> +#include <linux/ethtool.h> +#include <linux/mii.h> +#include <linux/phy.h> +#include <linux/platform_device.h> +#include <linux/prefetch.h> + +#include <asm/cache.h> +#include <asm/io.h> +#include <asm/processor.h> /* Processor type for cache alignment. */ + +/* Operational parameters that usually are not changed. */ + +#define CONFIG_SBMAC_COALESCE + +/* Time in jiffies before concluding the transmitter is hung. */ +#define TX_TIMEOUT (2*HZ) + + +MODULE_AUTHOR("Mitch Lichtenberg (Broadcom Corp.)"); +MODULE_DESCRIPTION("Broadcom SiByte SOC GB Ethernet driver"); + +/* A few user-configurable values which may be modified when a driver + module is loaded. */ + +/* 1 normal messages, 0 quiet .. 7 verbose. */ +static int debug = 1; +module_param(debug, int, 0444); +MODULE_PARM_DESC(debug, "Debug messages"); + +#ifdef CONFIG_SBMAC_COALESCE +static int int_pktcnt_tx = 255; +module_param(int_pktcnt_tx, int, 0444); +MODULE_PARM_DESC(int_pktcnt_tx, "TX packet count"); + +static int int_timeout_tx = 255; +module_param(int_timeout_tx, int, 0444); +MODULE_PARM_DESC(int_timeout_tx, "TX timeout value"); + +static int int_pktcnt_rx = 64; +module_param(int_pktcnt_rx, int, 0444); +MODULE_PARM_DESC(int_pktcnt_rx, "RX packet count"); + +static int int_timeout_rx = 64; +module_param(int_timeout_rx, int, 0444); +MODULE_PARM_DESC(int_timeout_rx, "RX timeout value"); +#endif + +#include <asm/sibyte/board.h> +#include <asm/sibyte/sb1250.h> +#if defined(CONFIG_SIBYTE_BCM1x80) +#include <asm/sibyte/bcm1480_regs.h> +#include <asm/sibyte/bcm1480_int.h> +#define R_MAC_DMA_OODPKTLOST_RX R_MAC_DMA_OODPKTLOST +#elif defined(CONFIG_SIBYTE_SB1250) || defined(CONFIG_SIBYTE_BCM112X) +#include <asm/sibyte/sb1250_regs.h> +#include <asm/sibyte/sb1250_int.h> +#else +#error invalid SiByte MAC configuration +#endif +#include <asm/sibyte/sb1250_scd.h> +#include <asm/sibyte/sb1250_mac.h> +#include <asm/sibyte/sb1250_dma.h> + +#if defined(CONFIG_SIBYTE_BCM1x80) +#define UNIT_INT(n) (K_BCM1480_INT_MAC_0 + ((n) * 2)) +#elif defined(CONFIG_SIBYTE_SB1250) || defined(CONFIG_SIBYTE_BCM112X) +#define UNIT_INT(n) (K_INT_MAC_0 + (n)) +#else +#error invalid SiByte MAC configuration +#endif + +#ifdef K_INT_PHY +#define SBMAC_PHY_INT K_INT_PHY +#else +#define SBMAC_PHY_INT PHY_POLL +#endif + +/********************************************************************** + * Simple types + ********************************************************************* */ + +enum sbmac_speed { + sbmac_speed_none = 0, + sbmac_speed_10 = SPEED_10, + sbmac_speed_100 = SPEED_100, + sbmac_speed_1000 = SPEED_1000, +}; + +enum sbmac_duplex { + sbmac_duplex_none = -1, + sbmac_duplex_half = DUPLEX_HALF, + sbmac_duplex_full = DUPLEX_FULL, +}; + +enum sbmac_fc { + sbmac_fc_none, + sbmac_fc_disabled, + sbmac_fc_frame, + sbmac_fc_collision, + sbmac_fc_carrier, +}; + +enum sbmac_state { + sbmac_state_uninit, + sbmac_state_off, + sbmac_state_on, + sbmac_state_broken, +}; + + +/********************************************************************** + * Macros + ********************************************************************* */ + + +#define SBDMA_NEXTBUF(d,f) ((((d)->f+1) == (d)->sbdma_dscrtable_end) ? \ + (d)->sbdma_dscrtable : (d)->f+1) + + +#define NUMCACHEBLKS(x) DIV_ROUND_UP(x, SMP_CACHE_BYTES) + +#define SBMAC_MAX_TXDESCR 256 +#define SBMAC_MAX_RXDESCR 256 + +#define ENET_PACKET_SIZE 1518 +/*#define ENET_PACKET_SIZE 9216 */ + +/********************************************************************** + * DMA Descriptor structure + ********************************************************************* */ + +struct sbdmadscr { + uint64_t dscr_a; + uint64_t dscr_b; +}; + +/********************************************************************** + * DMA Controller structure + ********************************************************************* */ + +struct sbmacdma { + + /* + * This stuff is used to identify the channel and the registers + * associated with it. + */ + struct sbmac_softc *sbdma_eth; /* back pointer to associated + MAC */ + int sbdma_channel; /* channel number */ + int sbdma_txdir; /* direction (1=transmit) */ + int sbdma_maxdescr; /* total # of descriptors + in ring */ +#ifdef CONFIG_SBMAC_COALESCE + int sbdma_int_pktcnt; + /* # descriptors rx/tx + before interrupt */ + int sbdma_int_timeout; + /* # usec rx/tx interrupt */ +#endif + void __iomem *sbdma_config0; /* DMA config register 0 */ + void __iomem *sbdma_config1; /* DMA config register 1 */ + void __iomem *sbdma_dscrbase; + /* descriptor base address */ + void __iomem *sbdma_dscrcnt; /* descriptor count register */ + void __iomem *sbdma_curdscr; /* current descriptor + address */ + void __iomem *sbdma_oodpktlost; + /* pkt drop (rx only) */ + + /* + * This stuff is for maintenance of the ring + */ + void *sbdma_dscrtable_unaligned; + struct sbdmadscr *sbdma_dscrtable; + /* base of descriptor table */ + struct sbdmadscr *sbdma_dscrtable_end; + /* end of descriptor table */ + struct sk_buff **sbdma_ctxtable; + /* context table, one + per descr */ + dma_addr_t sbdma_dscrtable_phys; + /* and also the phys addr */ + struct sbdmadscr *sbdma_addptr; /* next dscr for sw to add */ + struct sbdmadscr *sbdma_remptr; /* next dscr for sw + to remove */ +}; + + +/********************************************************************** + * Ethernet softc structure + ********************************************************************* */ + +struct sbmac_softc { + + /* + * Linux-specific things + */ + struct net_device *sbm_dev; /* pointer to linux device */ + struct napi_struct napi; + struct phy_device *phy_dev; /* the associated PHY device */ + struct mii_bus *mii_bus; /* the MII bus */ + spinlock_t sbm_lock; /* spin lock */ + int sbm_devflags; /* current device flags */ + + /* + * Controller-specific things + */ + void __iomem *sbm_base; /* MAC's base address */ + enum sbmac_state sbm_state; /* current state */ + + void __iomem *sbm_macenable; /* MAC Enable Register */ + void __iomem *sbm_maccfg; /* MAC Config Register */ + void __iomem *sbm_fifocfg; /* FIFO Config Register */ + void __iomem *sbm_framecfg; /* Frame Config Register */ + void __iomem *sbm_rxfilter; /* Receive Filter Register */ + void __iomem *sbm_isr; /* Interrupt Status Register */ + void __iomem *sbm_imr; /* Interrupt Mask Register */ + void __iomem *sbm_mdio; /* MDIO Register */ + + enum sbmac_speed sbm_speed; /* current speed */ + enum sbmac_duplex sbm_duplex; /* current duplex */ + enum sbmac_fc sbm_fc; /* cur. flow control setting */ + int sbm_pause; /* current pause setting */ + int sbm_link; /* current link state */ + + unsigned char sbm_hwaddr[ETH_ALEN]; + + struct sbmacdma sbm_txdma; /* only channel 0 for now */ + struct sbmacdma sbm_rxdma; + int rx_hw_checksum; + int sbe_idx; +}; + + +/********************************************************************** + * Externs + ********************************************************************* */ + +/********************************************************************** + * Prototypes + ********************************************************************* */ + +static void sbdma_initctx(struct sbmacdma *d, struct sbmac_softc *s, int chan, + int txrx, int maxdescr); +static void sbdma_channel_start(struct sbmacdma *d, int rxtx); +static int sbdma_add_rcvbuffer(struct sbmac_softc *sc, struct sbmacdma *d, + struct sk_buff *m); +static int sbdma_add_txbuffer(struct sbmacdma *d, struct sk_buff *m); +static void sbdma_emptyring(struct sbmacdma *d); +static void sbdma_fillring(struct sbmac_softc *sc, struct sbmacdma *d); +static int sbdma_rx_process(struct sbmac_softc *sc, struct sbmacdma *d, + int work_to_do, int poll); +static void sbdma_tx_process(struct sbmac_softc *sc, struct sbmacdma *d, + int poll); +static int sbmac_initctx(struct sbmac_softc *s); +static void sbmac_channel_start(struct sbmac_softc *s); +static void sbmac_channel_stop(struct sbmac_softc *s); +static enum sbmac_state sbmac_set_channel_state(struct sbmac_softc *, + enum sbmac_state); +static void sbmac_promiscuous_mode(struct sbmac_softc *sc, int onoff); +static uint64_t sbmac_addr2reg(unsigned char *ptr); +static irqreturn_t sbmac_intr(int irq, void *dev_instance); +static netdev_tx_t sbmac_start_tx(struct sk_buff *skb, struct net_device *dev); +static void sbmac_setmulti(struct sbmac_softc *sc); +static int sbmac_init(struct platform_device *pldev, long long base); +static int sbmac_set_speed(struct sbmac_softc *s, enum sbmac_speed speed); +static int sbmac_set_duplex(struct sbmac_softc *s, enum sbmac_duplex duplex, + enum sbmac_fc fc); + +static int sbmac_open(struct net_device *dev); +static void sbmac_tx_timeout (struct net_device *dev, unsigned int txqueue); +static void sbmac_set_rx_mode(struct net_device *dev); +static int sbmac_mii_ioctl(struct net_device *dev, struct ifreq *rq, int cmd); +static int sbmac_close(struct net_device *dev); +static int sbmac_poll(struct napi_struct *napi, int budget); + +static void sbmac_mii_poll(struct net_device *dev); +static int sbmac_mii_probe(struct net_device *dev); + +static void sbmac_mii_sync(void __iomem *sbm_mdio); +static void sbmac_mii_senddata(void __iomem *sbm_mdio, unsigned int data, + int bitcnt); +static int sbmac_mii_read(struct mii_bus *bus, int phyaddr, int regidx); +static int sbmac_mii_write(struct mii_bus *bus, int phyaddr, int regidx, + u16 val); + + +/********************************************************************** + * Globals + ********************************************************************* */ + +static char sbmac_string[] = "sb1250-mac"; + +static char sbmac_mdio_string[] = "sb1250-mac-mdio"; + + +/********************************************************************** + * MDIO constants + ********************************************************************* */ + +#define MII_COMMAND_START 0x01 +#define MII_COMMAND_READ 0x02 +#define MII_COMMAND_WRITE 0x01 +#define MII_COMMAND_ACK 0x02 + +#define M_MAC_MDIO_DIR_OUTPUT 0 /* for clarity */ + +#define ENABLE 1 +#define DISABLE 0 + +/********************************************************************** + * SBMAC_MII_SYNC(sbm_mdio) + * + * Synchronize with the MII - send a pattern of bits to the MII + * that will guarantee that it is ready to accept a command. + * + * Input parameters: + * sbm_mdio - address of the MAC's MDIO register + * + * Return value: + * nothing + ********************************************************************* */ + +static void sbmac_mii_sync(void __iomem *sbm_mdio) +{ + int cnt; + uint64_t bits; + int mac_mdio_genc; + + mac_mdio_genc = __raw_readq(sbm_mdio) & M_MAC_GENC; + + bits = M_MAC_MDIO_DIR_OUTPUT | M_MAC_MDIO_OUT; + + __raw_writeq(bits | mac_mdio_genc, sbm_mdio); + + for (cnt = 0; cnt < 32; cnt++) { + __raw_writeq(bits | M_MAC_MDC | mac_mdio_genc, sbm_mdio); + __raw_writeq(bits | mac_mdio_genc, sbm_mdio); + } +} + +/********************************************************************** + * SBMAC_MII_SENDDATA(sbm_mdio, data, bitcnt) + * + * Send some bits to the MII. The bits to be sent are right- + * justified in the 'data' parameter. + * + * Input parameters: + * sbm_mdio - address of the MAC's MDIO register + * data - data to send + * bitcnt - number of bits to send + ********************************************************************* */ + +static void sbmac_mii_senddata(void __iomem *sbm_mdio, unsigned int data, + int bitcnt) +{ + int i; + uint64_t bits; + unsigned int curmask; + int mac_mdio_genc; + + mac_mdio_genc = __raw_readq(sbm_mdio) & M_MAC_GENC; + + bits = M_MAC_MDIO_DIR_OUTPUT; + __raw_writeq(bits | mac_mdio_genc, sbm_mdio); + + curmask = 1 << (bitcnt - 1); + + for (i = 0; i < bitcnt; i++) { + if (data & curmask) + bits |= M_MAC_MDIO_OUT; + else bits &= ~M_MAC_MDIO_OUT; + __raw_writeq(bits | mac_mdio_genc, sbm_mdio); + __raw_writeq(bits | M_MAC_MDC | mac_mdio_genc, sbm_mdio); + __raw_writeq(bits | mac_mdio_genc, sbm_mdio); + curmask >>= 1; + } +} + + + +/********************************************************************** + * SBMAC_MII_READ(bus, phyaddr, regidx) + * Read a PHY register. + * + * Input parameters: + * bus - MDIO bus handle + * phyaddr - PHY's address + * regnum - index of register to read + * + * Return value: + * value read, or 0xffff if an error occurred. + ********************************************************************* */ + +static int sbmac_mii_read(struct mii_bus *bus, int phyaddr, int regidx) +{ + struct sbmac_softc *sc = (struct sbmac_softc *)bus->priv; + void __iomem *sbm_mdio = sc->sbm_mdio; + int idx; + int error; + int regval; + int mac_mdio_genc; + + /* + * Synchronize ourselves so that the PHY knows the next + * thing coming down is a command + */ + sbmac_mii_sync(sbm_mdio); + + /* + * Send the data to the PHY. The sequence is + * a "start" command (2 bits) + * a "read" command (2 bits) + * the PHY addr (5 bits) + * the register index (5 bits) + */ + sbmac_mii_senddata(sbm_mdio, MII_COMMAND_START, 2); + sbmac_mii_senddata(sbm_mdio, MII_COMMAND_READ, 2); + sbmac_mii_senddata(sbm_mdio, phyaddr, 5); + sbmac_mii_senddata(sbm_mdio, regidx, 5); + + mac_mdio_genc = __raw_readq(sbm_mdio) & M_MAC_GENC; + + /* + * Switch the port around without a clock transition. + */ + __raw_writeq(M_MAC_MDIO_DIR_INPUT | mac_mdio_genc, sbm_mdio); + + /* + * Send out a clock pulse to signal we want the status + */ + __raw_writeq(M_MAC_MDIO_DIR_INPUT | M_MAC_MDC | mac_mdio_genc, + sbm_mdio); + __raw_writeq(M_MAC_MDIO_DIR_INPUT | mac_mdio_genc, sbm_mdio); + + /* + * If an error occurred, the PHY will signal '1' back + */ + error = __raw_readq(sbm_mdio) & M_MAC_MDIO_IN; + + /* + * Issue an 'idle' clock pulse, but keep the direction + * the same. + */ + __raw_writeq(M_MAC_MDIO_DIR_INPUT | M_MAC_MDC | mac_mdio_genc, + sbm_mdio); + __raw_writeq(M_MAC_MDIO_DIR_INPUT | mac_mdio_genc, sbm_mdio); + + regval = 0; + + for (idx = 0; idx < 16; idx++) { + regval <<= 1; + + if (error == 0) { + if (__raw_readq(sbm_mdio) & M_MAC_MDIO_IN) + regval |= 1; + } + + __raw_writeq(M_MAC_MDIO_DIR_INPUT | M_MAC_MDC | mac_mdio_genc, + sbm_mdio); + __raw_writeq(M_MAC_MDIO_DIR_INPUT | mac_mdio_genc, sbm_mdio); + } + + /* Switch back to output */ + __raw_writeq(M_MAC_MDIO_DIR_OUTPUT | mac_mdio_genc, sbm_mdio); + + if (error == 0) + return regval; + return 0xffff; +} + + +/********************************************************************** + * SBMAC_MII_WRITE(bus, phyaddr, regidx, regval) + * + * Write a value to a PHY register. + * + * Input parameters: + * bus - MDIO bus handle + * phyaddr - PHY to use + * regidx - register within the PHY + * regval - data to write to register + * + * Return value: + * 0 for success + ********************************************************************* */ + +static int sbmac_mii_write(struct mii_bus *bus, int phyaddr, int regidx, + u16 regval) +{ + struct sbmac_softc *sc = (struct sbmac_softc *)bus->priv; + void __iomem *sbm_mdio = sc->sbm_mdio; + int mac_mdio_genc; + + sbmac_mii_sync(sbm_mdio); + + sbmac_mii_senddata(sbm_mdio, MII_COMMAND_START, 2); + sbmac_mii_senddata(sbm_mdio, MII_COMMAND_WRITE, 2); + sbmac_mii_senddata(sbm_mdio, phyaddr, 5); + sbmac_mii_senddata(sbm_mdio, regidx, 5); + sbmac_mii_senddata(sbm_mdio, MII_COMMAND_ACK, 2); + sbmac_mii_senddata(sbm_mdio, regval, 16); + + mac_mdio_genc = __raw_readq(sbm_mdio) & M_MAC_GENC; + + __raw_writeq(M_MAC_MDIO_DIR_OUTPUT | mac_mdio_genc, sbm_mdio); + + return 0; +} + + + +/********************************************************************** + * SBDMA_INITCTX(d,s,chan,txrx,maxdescr) + * + * Initialize a DMA channel context. Since there are potentially + * eight DMA channels per MAC, it's nice to do this in a standard + * way. + * + * Input parameters: + * d - struct sbmacdma (DMA channel context) + * s - struct sbmac_softc (pointer to a MAC) + * chan - channel number (0..1 right now) + * txrx - Identifies DMA_TX or DMA_RX for channel direction + * maxdescr - number of descriptors + * + * Return value: + * nothing + ********************************************************************* */ + +static void sbdma_initctx(struct sbmacdma *d, struct sbmac_softc *s, int chan, + int txrx, int maxdescr) +{ +#ifdef CONFIG_SBMAC_COALESCE + int int_pktcnt, int_timeout; +#endif + + /* + * Save away interesting stuff in the structure + */ + + d->sbdma_eth = s; + d->sbdma_channel = chan; + d->sbdma_txdir = txrx; + +#if 0 + /* RMON clearing */ + s->sbe_idx =(s->sbm_base - A_MAC_BASE_0)/MAC_SPACING; +#endif + + __raw_writeq(0, s->sbm_base + R_MAC_RMON_TX_BYTES); + __raw_writeq(0, s->sbm_base + R_MAC_RMON_COLLISIONS); + __raw_writeq(0, s->sbm_base + R_MAC_RMON_LATE_COL); + __raw_writeq(0, s->sbm_base + R_MAC_RMON_EX_COL); + __raw_writeq(0, s->sbm_base + R_MAC_RMON_FCS_ERROR); + __raw_writeq(0, s->sbm_base + R_MAC_RMON_TX_ABORT); + __raw_writeq(0, s->sbm_base + R_MAC_RMON_TX_BAD); + __raw_writeq(0, s->sbm_base + R_MAC_RMON_TX_GOOD); + __raw_writeq(0, s->sbm_base + R_MAC_RMON_TX_RUNT); + __raw_writeq(0, s->sbm_base + R_MAC_RMON_TX_OVERSIZE); + __raw_writeq(0, s->sbm_base + R_MAC_RMON_RX_BYTES); + __raw_writeq(0, s->sbm_base + R_MAC_RMON_RX_MCAST); + __raw_writeq(0, s->sbm_base + R_MAC_RMON_RX_BCAST); + __raw_writeq(0, s->sbm_base + R_MAC_RMON_RX_BAD); + __raw_writeq(0, s->sbm_base + R_MAC_RMON_RX_GOOD); + __raw_writeq(0, s->sbm_base + R_MAC_RMON_RX_RUNT); + __raw_writeq(0, s->sbm_base + R_MAC_RMON_RX_OVERSIZE); + __raw_writeq(0, s->sbm_base + R_MAC_RMON_RX_FCS_ERROR); + __raw_writeq(0, s->sbm_base + R_MAC_RMON_RX_LENGTH_ERROR); + __raw_writeq(0, s->sbm_base + R_MAC_RMON_RX_CODE_ERROR); + __raw_writeq(0, s->sbm_base + R_MAC_RMON_RX_ALIGN_ERROR); + + /* + * initialize register pointers + */ + + d->sbdma_config0 = + s->sbm_base + R_MAC_DMA_REGISTER(txrx,chan,R_MAC_DMA_CONFIG0); + d->sbdma_config1 = + s->sbm_base + R_MAC_DMA_REGISTER(txrx,chan,R_MAC_DMA_CONFIG1); + d->sbdma_dscrbase = + s->sbm_base + R_MAC_DMA_REGISTER(txrx,chan,R_MAC_DMA_DSCR_BASE); + d->sbdma_dscrcnt = + s->sbm_base + R_MAC_DMA_REGISTER(txrx,chan,R_MAC_DMA_DSCR_CNT); + d->sbdma_curdscr = + s->sbm_base + R_MAC_DMA_REGISTER(txrx,chan,R_MAC_DMA_CUR_DSCRADDR); + if (d->sbdma_txdir) + d->sbdma_oodpktlost = NULL; + else + d->sbdma_oodpktlost = + s->sbm_base + R_MAC_DMA_REGISTER(txrx,chan,R_MAC_DMA_OODPKTLOST_RX); + + /* + * Allocate memory for the ring + */ + + d->sbdma_maxdescr = maxdescr; + + d->sbdma_dscrtable_unaligned = kcalloc(d->sbdma_maxdescr + 1, + sizeof(*d->sbdma_dscrtable), + GFP_KERNEL); + + /* + * The descriptor table must be aligned to at least 16 bytes or the + * MAC will corrupt it. + */ + d->sbdma_dscrtable = (struct sbdmadscr *) + ALIGN((unsigned long)d->sbdma_dscrtable_unaligned, + sizeof(*d->sbdma_dscrtable)); + + d->sbdma_dscrtable_end = d->sbdma_dscrtable + d->sbdma_maxdescr; + + d->sbdma_dscrtable_phys = virt_to_phys(d->sbdma_dscrtable); + + /* + * And context table + */ + + d->sbdma_ctxtable = kcalloc(d->sbdma_maxdescr, + sizeof(*d->sbdma_ctxtable), GFP_KERNEL); + +#ifdef CONFIG_SBMAC_COALESCE + /* + * Setup Rx/Tx DMA coalescing defaults + */ + + int_pktcnt = (txrx == DMA_TX) ? int_pktcnt_tx : int_pktcnt_rx; + if ( int_pktcnt ) { + d->sbdma_int_pktcnt = int_pktcnt; + } else { + d->sbdma_int_pktcnt = 1; + } + + int_timeout = (txrx == DMA_TX) ? int_timeout_tx : int_timeout_rx; + if ( int_timeout ) { + d->sbdma_int_timeout = int_timeout; + } else { + d->sbdma_int_timeout = 0; + } +#endif + +} + +/********************************************************************** + * SBDMA_CHANNEL_START(d) + * + * Initialize the hardware registers for a DMA channel. + * + * Input parameters: + * d - DMA channel to init (context must be previously init'd + * rxtx - DMA_RX or DMA_TX depending on what type of channel + * + * Return value: + * nothing + ********************************************************************* */ + +static void sbdma_channel_start(struct sbmacdma *d, int rxtx) +{ + /* + * Turn on the DMA channel + */ + +#ifdef CONFIG_SBMAC_COALESCE + __raw_writeq(V_DMA_INT_TIMEOUT(d->sbdma_int_timeout) | + 0, d->sbdma_config1); + __raw_writeq(M_DMA_EOP_INT_EN | + V_DMA_RINGSZ(d->sbdma_maxdescr) | + V_DMA_INT_PKTCNT(d->sbdma_int_pktcnt) | + 0, d->sbdma_config0); +#else + __raw_writeq(0, d->sbdma_config1); + __raw_writeq(V_DMA_RINGSZ(d->sbdma_maxdescr) | + 0, d->sbdma_config0); +#endif + + __raw_writeq(d->sbdma_dscrtable_phys, d->sbdma_dscrbase); + + /* + * Initialize ring pointers + */ + + d->sbdma_addptr = d->sbdma_dscrtable; + d->sbdma_remptr = d->sbdma_dscrtable; +} + +/********************************************************************** + * SBDMA_CHANNEL_STOP(d) + * + * Initialize the hardware registers for a DMA channel. + * + * Input parameters: + * d - DMA channel to init (context must be previously init'd + * + * Return value: + * nothing + ********************************************************************* */ + +static void sbdma_channel_stop(struct sbmacdma *d) +{ + /* + * Turn off the DMA channel + */ + + __raw_writeq(0, d->sbdma_config1); + + __raw_writeq(0, d->sbdma_dscrbase); + + __raw_writeq(0, d->sbdma_config0); + + /* + * Zero ring pointers + */ + + d->sbdma_addptr = NULL; + d->sbdma_remptr = NULL; +} + +static inline void sbdma_align_skb(struct sk_buff *skb, + unsigned int power2, unsigned int offset) +{ + unsigned char *addr = skb->data; + unsigned char *newaddr = PTR_ALIGN(addr, power2); + + skb_reserve(skb, newaddr - addr + offset); +} + + +/********************************************************************** + * SBDMA_ADD_RCVBUFFER(d,sb) + * + * Add a buffer to the specified DMA channel. For receive channels, + * this queues a buffer for inbound packets. + * + * Input parameters: + * sc - softc structure + * d - DMA channel descriptor + * sb - sk_buff to add, or NULL if we should allocate one + * + * Return value: + * 0 if buffer could not be added (ring is full) + * 1 if buffer added successfully + ********************************************************************* */ + + +static int sbdma_add_rcvbuffer(struct sbmac_softc *sc, struct sbmacdma *d, + struct sk_buff *sb) +{ + struct net_device *dev = sc->sbm_dev; + struct sbdmadscr *dsc; + struct sbdmadscr *nextdsc; + struct sk_buff *sb_new = NULL; + int pktsize = ENET_PACKET_SIZE; + + /* get pointer to our current place in the ring */ + + dsc = d->sbdma_addptr; + nextdsc = SBDMA_NEXTBUF(d,sbdma_addptr); + + /* + * figure out if the ring is full - if the next descriptor + * is the same as the one that we're going to remove from + * the ring, the ring is full + */ + + if (nextdsc == d->sbdma_remptr) { + return -ENOSPC; + } + + /* + * Allocate a sk_buff if we don't already have one. + * If we do have an sk_buff, reset it so that it's empty. + * + * Note: sk_buffs don't seem to be guaranteed to have any sort + * of alignment when they are allocated. Therefore, allocate enough + * extra space to make sure that: + * + * 1. the data does not start in the middle of a cache line. + * 2. The data does not end in the middle of a cache line + * 3. The buffer can be aligned such that the IP addresses are + * naturally aligned. + * + * Remember, the SOCs MAC writes whole cache lines at a time, + * without reading the old contents first. So, if the sk_buff's + * data portion starts in the middle of a cache line, the SOC + * DMA will trash the beginning (and ending) portions. + */ + + if (sb == NULL) { + sb_new = netdev_alloc_skb(dev, ENET_PACKET_SIZE + + SMP_CACHE_BYTES * 2 + + NET_IP_ALIGN); + if (sb_new == NULL) + return -ENOBUFS; + + sbdma_align_skb(sb_new, SMP_CACHE_BYTES, NET_IP_ALIGN); + } + else { + sb_new = sb; + /* + * nothing special to reinit buffer, it's already aligned + * and sb->data already points to a good place. + */ + } + + /* + * fill in the descriptor + */ + +#ifdef CONFIG_SBMAC_COALESCE + /* + * Do not interrupt per DMA transfer. + */ + dsc->dscr_a = virt_to_phys(sb_new->data) | + V_DMA_DSCRA_A_SIZE(NUMCACHEBLKS(pktsize + NET_IP_ALIGN)) | 0; +#else + dsc->dscr_a = virt_to_phys(sb_new->data) | + V_DMA_DSCRA_A_SIZE(NUMCACHEBLKS(pktsize + NET_IP_ALIGN)) | + M_DMA_DSCRA_INTERRUPT; +#endif + + /* receiving: no options */ + dsc->dscr_b = 0; + + /* + * fill in the context + */ + + d->sbdma_ctxtable[dsc-d->sbdma_dscrtable] = sb_new; + + /* + * point at next packet + */ + + d->sbdma_addptr = nextdsc; + + /* + * Give the buffer to the DMA engine. + */ + + __raw_writeq(1, d->sbdma_dscrcnt); + + return 0; /* we did it */ +} + +/********************************************************************** + * SBDMA_ADD_TXBUFFER(d,sb) + * + * Add a transmit buffer to the specified DMA channel, causing a + * transmit to start. + * + * Input parameters: + * d - DMA channel descriptor + * sb - sk_buff to add + * + * Return value: + * 0 transmit queued successfully + * otherwise error code + ********************************************************************* */ + + +static int sbdma_add_txbuffer(struct sbmacdma *d, struct sk_buff *sb) +{ + struct sbdmadscr *dsc; + struct sbdmadscr *nextdsc; + uint64_t phys; + uint64_t ncb; + int length; + + /* get pointer to our current place in the ring */ + + dsc = d->sbdma_addptr; + nextdsc = SBDMA_NEXTBUF(d,sbdma_addptr); + + /* + * figure out if the ring is full - if the next descriptor + * is the same as the one that we're going to remove from + * the ring, the ring is full + */ + + if (nextdsc == d->sbdma_remptr) { + return -ENOSPC; + } + + /* + * Under Linux, it's not necessary to copy/coalesce buffers + * like it is on NetBSD. We think they're all contiguous, + * but that may not be true for GBE. + */ + + length = sb->len; + + /* + * fill in the descriptor. Note that the number of cache + * blocks in the descriptor is the number of blocks + * *spanned*, so we need to add in the offset (if any) + * while doing the calculation. + */ + + phys = virt_to_phys(sb->data); + ncb = NUMCACHEBLKS(length+(phys & (SMP_CACHE_BYTES - 1))); + + dsc->dscr_a = phys | + V_DMA_DSCRA_A_SIZE(ncb) | +#ifndef CONFIG_SBMAC_COALESCE + M_DMA_DSCRA_INTERRUPT | +#endif + M_DMA_ETHTX_SOP; + + /* transmitting: set outbound options and length */ + + dsc->dscr_b = V_DMA_DSCRB_OPTIONS(K_DMA_ETHTX_APPENDCRC_APPENDPAD) | + V_DMA_DSCRB_PKT_SIZE(length); + + /* + * fill in the context + */ + + d->sbdma_ctxtable[dsc-d->sbdma_dscrtable] = sb; + + /* + * point at next packet + */ + + d->sbdma_addptr = nextdsc; + + /* + * Give the buffer to the DMA engine. + */ + + __raw_writeq(1, d->sbdma_dscrcnt); + + return 0; /* we did it */ +} + + + + +/********************************************************************** + * SBDMA_EMPTYRING(d) + * + * Free all allocated sk_buffs on the specified DMA channel; + * + * Input parameters: + * d - DMA channel + * + * Return value: + * nothing + ********************************************************************* */ + +static void sbdma_emptyring(struct sbmacdma *d) +{ + int idx; + struct sk_buff *sb; + + for (idx = 0; idx < d->sbdma_maxdescr; idx++) { + sb = d->sbdma_ctxtable[idx]; + if (sb) { + dev_kfree_skb(sb); + d->sbdma_ctxtable[idx] = NULL; + } + } +} + + +/********************************************************************** + * SBDMA_FILLRING(d) + * + * Fill the specified DMA channel (must be receive channel) + * with sk_buffs + * + * Input parameters: + * sc - softc structure + * d - DMA channel + * + * Return value: + * nothing + ********************************************************************* */ + +static void sbdma_fillring(struct sbmac_softc *sc, struct sbmacdma *d) +{ + int idx; + + for (idx = 0; idx < SBMAC_MAX_RXDESCR - 1; idx++) { + if (sbdma_add_rcvbuffer(sc, d, NULL) != 0) + break; + } +} + +#ifdef CONFIG_NET_POLL_CONTROLLER +static void sbmac_netpoll(struct net_device *netdev) +{ + struct sbmac_softc *sc = netdev_priv(netdev); + int irq = sc->sbm_dev->irq; + + __raw_writeq(0, sc->sbm_imr); + + sbmac_intr(irq, netdev); + +#ifdef CONFIG_SBMAC_COALESCE + __raw_writeq(((M_MAC_INT_EOP_COUNT | M_MAC_INT_EOP_TIMER) << S_MAC_TX_CH0) | + ((M_MAC_INT_EOP_COUNT | M_MAC_INT_EOP_TIMER) << S_MAC_RX_CH0), + sc->sbm_imr); +#else + __raw_writeq((M_MAC_INT_CHANNEL << S_MAC_TX_CH0) | + (M_MAC_INT_CHANNEL << S_MAC_RX_CH0), sc->sbm_imr); +#endif +} +#endif + +/********************************************************************** + * SBDMA_RX_PROCESS(sc,d,work_to_do,poll) + * + * Process "completed" receive buffers on the specified DMA channel. + * + * Input parameters: + * sc - softc structure + * d - DMA channel context + * work_to_do - no. of packets to process before enabling interrupt + * again (for NAPI) + * poll - 1: using polling (for NAPI) + * + * Return value: + * nothing + ********************************************************************* */ + +static int sbdma_rx_process(struct sbmac_softc *sc, struct sbmacdma *d, + int work_to_do, int poll) +{ + struct net_device *dev = sc->sbm_dev; + int curidx; + int hwidx; + struct sbdmadscr *dsc; + struct sk_buff *sb; + int len; + int work_done = 0; + int dropped = 0; + + prefetch(d); + +again: + /* Check if the HW dropped any frames */ + dev->stats.rx_fifo_errors + += __raw_readq(sc->sbm_rxdma.sbdma_oodpktlost) & 0xffff; + __raw_writeq(0, sc->sbm_rxdma.sbdma_oodpktlost); + + while (work_to_do-- > 0) { + /* + * figure out where we are (as an index) and where + * the hardware is (also as an index) + * + * This could be done faster if (for example) the + * descriptor table was page-aligned and contiguous in + * both virtual and physical memory -- you could then + * just compare the low-order bits of the virtual address + * (sbdma_remptr) and the physical address (sbdma_curdscr CSR) + */ + + dsc = d->sbdma_remptr; + curidx = dsc - d->sbdma_dscrtable; + + prefetch(dsc); + prefetch(&d->sbdma_ctxtable[curidx]); + + hwidx = ((__raw_readq(d->sbdma_curdscr) & M_DMA_CURDSCR_ADDR) - + d->sbdma_dscrtable_phys) / + sizeof(*d->sbdma_dscrtable); + + /* + * If they're the same, that means we've processed all + * of the descriptors up to (but not including) the one that + * the hardware is working on right now. + */ + + if (curidx == hwidx) + goto done; + + /* + * Otherwise, get the packet's sk_buff ptr back + */ + + sb = d->sbdma_ctxtable[curidx]; + d->sbdma_ctxtable[curidx] = NULL; + + len = (int)G_DMA_DSCRB_PKT_SIZE(dsc->dscr_b) - 4; + + /* + * Check packet status. If good, process it. + * If not, silently drop it and put it back on the + * receive ring. + */ + + if (likely (!(dsc->dscr_a & M_DMA_ETHRX_BAD))) { + + /* + * Add a new buffer to replace the old one. If we fail + * to allocate a buffer, we're going to drop this + * packet and put it right back on the receive ring. + */ + + if (unlikely(sbdma_add_rcvbuffer(sc, d, NULL) == + -ENOBUFS)) { + dev->stats.rx_dropped++; + /* Re-add old buffer */ + sbdma_add_rcvbuffer(sc, d, sb); + /* No point in continuing at the moment */ + printk(KERN_ERR "dropped packet (1)\n"); + d->sbdma_remptr = SBDMA_NEXTBUF(d,sbdma_remptr); + goto done; + } else { + /* + * Set length into the packet + */ + skb_put(sb,len); + + /* + * Buffer has been replaced on the + * receive ring. Pass the buffer to + * the kernel + */ + sb->protocol = eth_type_trans(sb,d->sbdma_eth->sbm_dev); + /* Check hw IPv4/TCP checksum if supported */ + if (sc->rx_hw_checksum == ENABLE) { + if (!((dsc->dscr_a) & M_DMA_ETHRX_BADIP4CS) && + !((dsc->dscr_a) & M_DMA_ETHRX_BADTCPCS)) { + sb->ip_summed = CHECKSUM_UNNECESSARY; + /* don't need to set sb->csum */ + } else { + skb_checksum_none_assert(sb); + } + } + prefetch(sb->data); + prefetch((const void *)(((char *)sb->data)+32)); + if (poll) + dropped = netif_receive_skb(sb); + else + dropped = netif_rx(sb); + + if (dropped == NET_RX_DROP) { + dev->stats.rx_dropped++; + d->sbdma_remptr = SBDMA_NEXTBUF(d,sbdma_remptr); + goto done; + } + else { + dev->stats.rx_bytes += len; + dev->stats.rx_packets++; + } + } + } else { + /* + * Packet was mangled somehow. Just drop it and + * put it back on the receive ring. + */ + dev->stats.rx_errors++; + sbdma_add_rcvbuffer(sc, d, sb); + } + + + /* + * .. and advance to the next buffer. + */ + + d->sbdma_remptr = SBDMA_NEXTBUF(d,sbdma_remptr); + work_done++; + } + if (!poll) { + work_to_do = 32; + goto again; /* collect fifo drop statistics again */ + } +done: + return work_done; +} + +/********************************************************************** + * SBDMA_TX_PROCESS(sc,d) + * + * Process "completed" transmit buffers on the specified DMA channel. + * This is normally called within the interrupt service routine. + * Note that this isn't really ideal for priority channels, since + * it processes all of the packets on a given channel before + * returning. + * + * Input parameters: + * sc - softc structure + * d - DMA channel context + * poll - 1: using polling (for NAPI) + * + * Return value: + * nothing + ********************************************************************* */ + +static void sbdma_tx_process(struct sbmac_softc *sc, struct sbmacdma *d, + int poll) +{ + struct net_device *dev = sc->sbm_dev; + int curidx; + int hwidx; + struct sbdmadscr *dsc; + struct sk_buff *sb; + unsigned long flags; + int packets_handled = 0; + + spin_lock_irqsave(&(sc->sbm_lock), flags); + + if (d->sbdma_remptr == d->sbdma_addptr) + goto end_unlock; + + hwidx = ((__raw_readq(d->sbdma_curdscr) & M_DMA_CURDSCR_ADDR) - + d->sbdma_dscrtable_phys) / sizeof(*d->sbdma_dscrtable); + + for (;;) { + /* + * figure out where we are (as an index) and where + * the hardware is (also as an index) + * + * This could be done faster if (for example) the + * descriptor table was page-aligned and contiguous in + * both virtual and physical memory -- you could then + * just compare the low-order bits of the virtual address + * (sbdma_remptr) and the physical address (sbdma_curdscr CSR) + */ + + curidx = d->sbdma_remptr - d->sbdma_dscrtable; + + /* + * If they're the same, that means we've processed all + * of the descriptors up to (but not including) the one that + * the hardware is working on right now. + */ + + if (curidx == hwidx) + break; + + /* + * Otherwise, get the packet's sk_buff ptr back + */ + + dsc = &(d->sbdma_dscrtable[curidx]); + sb = d->sbdma_ctxtable[curidx]; + d->sbdma_ctxtable[curidx] = NULL; + + /* + * Stats + */ + + dev->stats.tx_bytes += sb->len; + dev->stats.tx_packets++; + + /* + * for transmits, we just free buffers. + */ + + dev_consume_skb_irq(sb); + + /* + * .. and advance to the next buffer. + */ + + d->sbdma_remptr = SBDMA_NEXTBUF(d,sbdma_remptr); + + packets_handled++; + + } + + /* + * Decide if we should wake up the protocol or not. + * Other drivers seem to do this when we reach a low + * watermark on the transmit queue. + */ + + if (packets_handled) + netif_wake_queue(d->sbdma_eth->sbm_dev); + +end_unlock: + spin_unlock_irqrestore(&(sc->sbm_lock), flags); + +} + + + +/********************************************************************** + * SBMAC_INITCTX(s) + * + * Initialize an Ethernet context structure - this is called + * once per MAC on the 1250. Memory is allocated here, so don't + * call it again from inside the ioctl routines that bring the + * interface up/down + * + * Input parameters: + * s - sbmac context structure + * + * Return value: + * 0 + ********************************************************************* */ + +static int sbmac_initctx(struct sbmac_softc *s) +{ + + /* + * figure out the addresses of some ports + */ + + s->sbm_macenable = s->sbm_base + R_MAC_ENABLE; + s->sbm_maccfg = s->sbm_base + R_MAC_CFG; + s->sbm_fifocfg = s->sbm_base + R_MAC_THRSH_CFG; + s->sbm_framecfg = s->sbm_base + R_MAC_FRAMECFG; + s->sbm_rxfilter = s->sbm_base + R_MAC_ADFILTER_CFG; + s->sbm_isr = s->sbm_base + R_MAC_STATUS; + s->sbm_imr = s->sbm_base + R_MAC_INT_MASK; + s->sbm_mdio = s->sbm_base + R_MAC_MDIO; + + /* + * Initialize the DMA channels. Right now, only one per MAC is used + * Note: Only do this _once_, as it allocates memory from the kernel! + */ + + sbdma_initctx(&(s->sbm_txdma),s,0,DMA_TX,SBMAC_MAX_TXDESCR); + sbdma_initctx(&(s->sbm_rxdma),s,0,DMA_RX,SBMAC_MAX_RXDESCR); + + /* + * initial state is OFF + */ + + s->sbm_state = sbmac_state_off; + + return 0; +} + + +static void sbdma_uninitctx(struct sbmacdma *d) +{ + kfree(d->sbdma_dscrtable_unaligned); + d->sbdma_dscrtable_unaligned = d->sbdma_dscrtable = NULL; + + kfree(d->sbdma_ctxtable); + d->sbdma_ctxtable = NULL; +} + + +static void sbmac_uninitctx(struct sbmac_softc *sc) +{ + sbdma_uninitctx(&(sc->sbm_txdma)); + sbdma_uninitctx(&(sc->sbm_rxdma)); +} + + +/********************************************************************** + * SBMAC_CHANNEL_START(s) + * + * Start packet processing on this MAC. + * + * Input parameters: + * s - sbmac structure + * + * Return value: + * nothing + ********************************************************************* */ + +static void sbmac_channel_start(struct sbmac_softc *s) +{ + uint64_t reg; + void __iomem *port; + uint64_t cfg,fifo,framecfg; + int idx, th_value; + + /* + * Don't do this if running + */ + + if (s->sbm_state == sbmac_state_on) + return; + + /* + * Bring the controller out of reset, but leave it off. + */ + + __raw_writeq(0, s->sbm_macenable); + + /* + * Ignore all received packets + */ + + __raw_writeq(0, s->sbm_rxfilter); + + /* + * Calculate values for various control registers. + */ + + cfg = M_MAC_RETRY_EN | + M_MAC_TX_HOLD_SOP_EN | + V_MAC_TX_PAUSE_CNT_16K | + M_MAC_AP_STAT_EN | + M_MAC_FAST_SYNC | + M_MAC_SS_EN | + 0; + + /* + * Be sure that RD_THRSH+WR_THRSH <= 32 for pass1 pars + * and make sure that RD_THRSH + WR_THRSH <=128 for pass2 and above + * Use a larger RD_THRSH for gigabit + */ + if (soc_type == K_SYS_SOC_TYPE_BCM1250 && periph_rev < 2) + th_value = 28; + else + th_value = 64; + + fifo = V_MAC_TX_WR_THRSH(4) | /* Must be '4' or '8' */ + ((s->sbm_speed == sbmac_speed_1000) + ? V_MAC_TX_RD_THRSH(th_value) : V_MAC_TX_RD_THRSH(4)) | + V_MAC_TX_RL_THRSH(4) | + V_MAC_RX_PL_THRSH(4) | + V_MAC_RX_RD_THRSH(4) | /* Must be '4' */ + V_MAC_RX_RL_THRSH(8) | + 0; + + framecfg = V_MAC_MIN_FRAMESZ_DEFAULT | + V_MAC_MAX_FRAMESZ_DEFAULT | + V_MAC_BACKOFF_SEL(1); + + /* + * Clear out the hash address map + */ + + port = s->sbm_base + R_MAC_HASH_BASE; + for (idx = 0; idx < MAC_HASH_COUNT; idx++) { + __raw_writeq(0, port); + port += sizeof(uint64_t); + } + + /* + * Clear out the exact-match table + */ + + port = s->sbm_base + R_MAC_ADDR_BASE; + for (idx = 0; idx < MAC_ADDR_COUNT; idx++) { + __raw_writeq(0, port); + port += sizeof(uint64_t); + } + + /* + * Clear out the DMA Channel mapping table registers + */ + + port = s->sbm_base + R_MAC_CHUP0_BASE; + for (idx = 0; idx < MAC_CHMAP_COUNT; idx++) { + __raw_writeq(0, port); + port += sizeof(uint64_t); + } + + + port = s->sbm_base + R_MAC_CHLO0_BASE; + for (idx = 0; idx < MAC_CHMAP_COUNT; idx++) { + __raw_writeq(0, port); + port += sizeof(uint64_t); + } + + /* + * Program the hardware address. It goes into the hardware-address + * register as well as the first filter register. + */ + + reg = sbmac_addr2reg(s->sbm_hwaddr); + + port = s->sbm_base + R_MAC_ADDR_BASE; + __raw_writeq(reg, port); + port = s->sbm_base + R_MAC_ETHERNET_ADDR; + + __raw_writeq(reg, port); + + /* + * Set the receive filter for no packets, and write values + * to the various config registers + */ + + __raw_writeq(0, s->sbm_rxfilter); + __raw_writeq(0, s->sbm_imr); + __raw_writeq(framecfg, s->sbm_framecfg); + __raw_writeq(fifo, s->sbm_fifocfg); + __raw_writeq(cfg, s->sbm_maccfg); + + /* + * Initialize DMA channels (rings should be ok now) + */ + + sbdma_channel_start(&(s->sbm_rxdma), DMA_RX); + sbdma_channel_start(&(s->sbm_txdma), DMA_TX); + + /* + * Configure the speed, duplex, and flow control + */ + + sbmac_set_speed(s,s->sbm_speed); + sbmac_set_duplex(s,s->sbm_duplex,s->sbm_fc); + + /* + * Fill the receive ring + */ + + sbdma_fillring(s, &(s->sbm_rxdma)); + + /* + * Turn on the rest of the bits in the enable register + */ + +#if defined(CONFIG_SIBYTE_BCM1x80) + __raw_writeq(M_MAC_RXDMA_EN0 | + M_MAC_TXDMA_EN0, s->sbm_macenable); +#elif defined(CONFIG_SIBYTE_SB1250) || defined(CONFIG_SIBYTE_BCM112X) + __raw_writeq(M_MAC_RXDMA_EN0 | + M_MAC_TXDMA_EN0 | + M_MAC_RX_ENABLE | + M_MAC_TX_ENABLE, s->sbm_macenable); +#else +#error invalid SiByte MAC configuration +#endif + +#ifdef CONFIG_SBMAC_COALESCE + __raw_writeq(((M_MAC_INT_EOP_COUNT | M_MAC_INT_EOP_TIMER) << S_MAC_TX_CH0) | + ((M_MAC_INT_EOP_COUNT | M_MAC_INT_EOP_TIMER) << S_MAC_RX_CH0), s->sbm_imr); +#else + __raw_writeq((M_MAC_INT_CHANNEL << S_MAC_TX_CH0) | + (M_MAC_INT_CHANNEL << S_MAC_RX_CH0), s->sbm_imr); +#endif + + /* + * Enable receiving unicasts and broadcasts + */ + + __raw_writeq(M_MAC_UCAST_EN | M_MAC_BCAST_EN, s->sbm_rxfilter); + + /* + * we're running now. + */ + + s->sbm_state = sbmac_state_on; + + /* + * Program multicast addresses + */ + + sbmac_setmulti(s); + + /* + * If channel was in promiscuous mode before, turn that on + */ + + if (s->sbm_devflags & IFF_PROMISC) { + sbmac_promiscuous_mode(s,1); + } + +} + + +/********************************************************************** + * SBMAC_CHANNEL_STOP(s) + * + * Stop packet processing on this MAC. + * + * Input parameters: + * s - sbmac structure + * + * Return value: + * nothing + ********************************************************************* */ + +static void sbmac_channel_stop(struct sbmac_softc *s) +{ + /* don't do this if already stopped */ + + if (s->sbm_state == sbmac_state_off) + return; + + /* don't accept any packets, disable all interrupts */ + + __raw_writeq(0, s->sbm_rxfilter); + __raw_writeq(0, s->sbm_imr); + + /* Turn off ticker */ + + /* XXX */ + + /* turn off receiver and transmitter */ + + __raw_writeq(0, s->sbm_macenable); + + /* We're stopped now. */ + + s->sbm_state = sbmac_state_off; + + /* + * Stop DMA channels (rings should be ok now) + */ + + sbdma_channel_stop(&(s->sbm_rxdma)); + sbdma_channel_stop(&(s->sbm_txdma)); + + /* Empty the receive and transmit rings */ + + sbdma_emptyring(&(s->sbm_rxdma)); + sbdma_emptyring(&(s->sbm_txdma)); + +} + +/********************************************************************** + * SBMAC_SET_CHANNEL_STATE(state) + * + * Set the channel's state ON or OFF + * + * Input parameters: + * state - new state + * + * Return value: + * old state + ********************************************************************* */ +static enum sbmac_state sbmac_set_channel_state(struct sbmac_softc *sc, + enum sbmac_state state) +{ + enum sbmac_state oldstate = sc->sbm_state; + + /* + * If same as previous state, return + */ + + if (state == oldstate) { + return oldstate; + } + + /* + * If new state is ON, turn channel on + */ + + if (state == sbmac_state_on) { + sbmac_channel_start(sc); + } + else { + sbmac_channel_stop(sc); + } + + /* + * Return previous state + */ + + return oldstate; +} + + +/********************************************************************** + * SBMAC_PROMISCUOUS_MODE(sc,onoff) + * + * Turn on or off promiscuous mode + * + * Input parameters: + * sc - softc + * onoff - 1 to turn on, 0 to turn off + * + * Return value: + * nothing + ********************************************************************* */ + +static void sbmac_promiscuous_mode(struct sbmac_softc *sc,int onoff) +{ + uint64_t reg; + + if (sc->sbm_state != sbmac_state_on) + return; + + if (onoff) { + reg = __raw_readq(sc->sbm_rxfilter); + reg |= M_MAC_ALLPKT_EN; + __raw_writeq(reg, sc->sbm_rxfilter); + } + else { + reg = __raw_readq(sc->sbm_rxfilter); + reg &= ~M_MAC_ALLPKT_EN; + __raw_writeq(reg, sc->sbm_rxfilter); + } +} + +/********************************************************************** + * SBMAC_SETIPHDR_OFFSET(sc,onoff) + * + * Set the iphdr offset as 15 assuming ethernet encapsulation + * + * Input parameters: + * sc - softc + * + * Return value: + * nothing + ********************************************************************* */ + +static void sbmac_set_iphdr_offset(struct sbmac_softc *sc) +{ + uint64_t reg; + + /* Hard code the off set to 15 for now */ + reg = __raw_readq(sc->sbm_rxfilter); + reg &= ~M_MAC_IPHDR_OFFSET | V_MAC_IPHDR_OFFSET(15); + __raw_writeq(reg, sc->sbm_rxfilter); + + /* BCM1250 pass1 didn't have hardware checksum. Everything + later does. */ + if (soc_type == K_SYS_SOC_TYPE_BCM1250 && periph_rev < 2) { + sc->rx_hw_checksum = DISABLE; + } else { + sc->rx_hw_checksum = ENABLE; + } +} + + +/********************************************************************** + * SBMAC_ADDR2REG(ptr) + * + * Convert six bytes into the 64-bit register value that + * we typically write into the SBMAC's address/mcast registers + * + * Input parameters: + * ptr - pointer to 6 bytes + * + * Return value: + * register value + ********************************************************************* */ + +static uint64_t sbmac_addr2reg(unsigned char *ptr) +{ + uint64_t reg = 0; + + ptr += 6; + + reg |= (uint64_t) *(--ptr); + reg <<= 8; + reg |= (uint64_t) *(--ptr); + reg <<= 8; + reg |= (uint64_t) *(--ptr); + reg <<= 8; + reg |= (uint64_t) *(--ptr); + reg <<= 8; + reg |= (uint64_t) *(--ptr); + reg <<= 8; + reg |= (uint64_t) *(--ptr); + + return reg; +} + + +/********************************************************************** + * SBMAC_SET_SPEED(s,speed) + * + * Configure LAN speed for the specified MAC. + * Warning: must be called when MAC is off! + * + * Input parameters: + * s - sbmac structure + * speed - speed to set MAC to (see enum sbmac_speed) + * + * Return value: + * 1 if successful + * 0 indicates invalid parameters + ********************************************************************* */ + +static int sbmac_set_speed(struct sbmac_softc *s, enum sbmac_speed speed) +{ + uint64_t cfg; + uint64_t framecfg; + + /* + * Save new current values + */ + + s->sbm_speed = speed; + + if (s->sbm_state == sbmac_state_on) + return 0; /* save for next restart */ + + /* + * Read current register values + */ + + cfg = __raw_readq(s->sbm_maccfg); + framecfg = __raw_readq(s->sbm_framecfg); + + /* + * Mask out the stuff we want to change + */ + + cfg &= ~(M_MAC_BURST_EN | M_MAC_SPEED_SEL); + framecfg &= ~(M_MAC_IFG_RX | M_MAC_IFG_TX | M_MAC_IFG_THRSH | + M_MAC_SLOT_SIZE); + + /* + * Now add in the new bits + */ + + switch (speed) { + case sbmac_speed_10: + framecfg |= V_MAC_IFG_RX_10 | + V_MAC_IFG_TX_10 | + K_MAC_IFG_THRSH_10 | + V_MAC_SLOT_SIZE_10; + cfg |= V_MAC_SPEED_SEL_10MBPS; + break; + + case sbmac_speed_100: + framecfg |= V_MAC_IFG_RX_100 | + V_MAC_IFG_TX_100 | + V_MAC_IFG_THRSH_100 | + V_MAC_SLOT_SIZE_100; + cfg |= V_MAC_SPEED_SEL_100MBPS ; + break; + + case sbmac_speed_1000: + framecfg |= V_MAC_IFG_RX_1000 | + V_MAC_IFG_TX_1000 | + V_MAC_IFG_THRSH_1000 | + V_MAC_SLOT_SIZE_1000; + cfg |= V_MAC_SPEED_SEL_1000MBPS | M_MAC_BURST_EN; + break; + + default: + return 0; + } + + /* + * Send the bits back to the hardware + */ + + __raw_writeq(framecfg, s->sbm_framecfg); + __raw_writeq(cfg, s->sbm_maccfg); + + return 1; +} + +/********************************************************************** + * SBMAC_SET_DUPLEX(s,duplex,fc) + * + * Set Ethernet duplex and flow control options for this MAC + * Warning: must be called when MAC is off! + * + * Input parameters: + * s - sbmac structure + * duplex - duplex setting (see enum sbmac_duplex) + * fc - flow control setting (see enum sbmac_fc) + * + * Return value: + * 1 if ok + * 0 if an invalid parameter combination was specified + ********************************************************************* */ + +static int sbmac_set_duplex(struct sbmac_softc *s, enum sbmac_duplex duplex, + enum sbmac_fc fc) +{ + uint64_t cfg; + + /* + * Save new current values + */ + + s->sbm_duplex = duplex; + s->sbm_fc = fc; + + if (s->sbm_state == sbmac_state_on) + return 0; /* save for next restart */ + + /* + * Read current register values + */ + + cfg = __raw_readq(s->sbm_maccfg); + + /* + * Mask off the stuff we're about to change + */ + + cfg &= ~(M_MAC_FC_SEL | M_MAC_FC_CMD | M_MAC_HDX_EN); + + + switch (duplex) { + case sbmac_duplex_half: + switch (fc) { + case sbmac_fc_disabled: + cfg |= M_MAC_HDX_EN | V_MAC_FC_CMD_DISABLED; + break; + + case sbmac_fc_collision: + cfg |= M_MAC_HDX_EN | V_MAC_FC_CMD_ENABLED; + break; + + case sbmac_fc_carrier: + cfg |= M_MAC_HDX_EN | V_MAC_FC_CMD_ENAB_FALSECARR; + break; + + case sbmac_fc_frame: /* not valid in half duplex */ + default: /* invalid selection */ + return 0; + } + break; + + case sbmac_duplex_full: + switch (fc) { + case sbmac_fc_disabled: + cfg |= V_MAC_FC_CMD_DISABLED; + break; + + case sbmac_fc_frame: + cfg |= V_MAC_FC_CMD_ENABLED; + break; + + case sbmac_fc_collision: /* not valid in full duplex */ + case sbmac_fc_carrier: /* not valid in full duplex */ + default: + return 0; + } + break; + default: + return 0; + } + + /* + * Send the bits back to the hardware + */ + + __raw_writeq(cfg, s->sbm_maccfg); + + return 1; +} + + + + +/********************************************************************** + * SBMAC_INTR() + * + * Interrupt handler for MAC interrupts + * + * Input parameters: + * MAC structure + * + * Return value: + * nothing + ********************************************************************* */ +static irqreturn_t sbmac_intr(int irq,void *dev_instance) +{ + struct net_device *dev = (struct net_device *) dev_instance; + struct sbmac_softc *sc = netdev_priv(dev); + uint64_t isr; + int handled = 0; + + /* + * Read the ISR (this clears the bits in the real + * register, except for counter addr) + */ + + isr = __raw_readq(sc->sbm_isr) & ~M_MAC_COUNTER_ADDR; + + if (isr == 0) + return IRQ_RETVAL(0); + handled = 1; + + /* + * Transmits on channel 0 + */ + + if (isr & (M_MAC_INT_CHANNEL << S_MAC_TX_CH0)) + sbdma_tx_process(sc,&(sc->sbm_txdma), 0); + + if (isr & (M_MAC_INT_CHANNEL << S_MAC_RX_CH0)) { + if (napi_schedule_prep(&sc->napi)) { + __raw_writeq(0, sc->sbm_imr); + __napi_schedule(&sc->napi); + /* Depend on the exit from poll to reenable intr */ + } + else { + /* may leave some packets behind */ + sbdma_rx_process(sc,&(sc->sbm_rxdma), + SBMAC_MAX_RXDESCR * 2, 0); + } + } + return IRQ_RETVAL(handled); +} + +/********************************************************************** + * SBMAC_START_TX(skb,dev) + * + * Start output on the specified interface. Basically, we + * queue as many buffers as we can until the ring fills up, or + * we run off the end of the queue, whichever comes first. + * + * Input parameters: + * + * + * Return value: + * nothing + ********************************************************************* */ +static netdev_tx_t sbmac_start_tx(struct sk_buff *skb, struct net_device *dev) +{ + struct sbmac_softc *sc = netdev_priv(dev); + unsigned long flags; + + /* lock eth irq */ + spin_lock_irqsave(&sc->sbm_lock, flags); + + /* + * Put the buffer on the transmit ring. If we + * don't have room, stop the queue. + */ + + if (sbdma_add_txbuffer(&(sc->sbm_txdma),skb)) { + /* XXX save skb that we could not send */ + netif_stop_queue(dev); + spin_unlock_irqrestore(&sc->sbm_lock, flags); + + return NETDEV_TX_BUSY; + } + + spin_unlock_irqrestore(&sc->sbm_lock, flags); + + return NETDEV_TX_OK; +} + +/********************************************************************** + * SBMAC_SETMULTI(sc) + * + * Reprogram the multicast table into the hardware, given + * the list of multicasts associated with the interface + * structure. + * + * Input parameters: + * sc - softc + * + * Return value: + * nothing + ********************************************************************* */ + +static void sbmac_setmulti(struct sbmac_softc *sc) +{ + uint64_t reg; + void __iomem *port; + int idx; + struct netdev_hw_addr *ha; + struct net_device *dev = sc->sbm_dev; + + /* + * Clear out entire multicast table. We do this by nuking + * the entire hash table and all the direct matches except + * the first one, which is used for our station address + */ + + for (idx = 1; idx < MAC_ADDR_COUNT; idx++) { + port = sc->sbm_base + R_MAC_ADDR_BASE+(idx*sizeof(uint64_t)); + __raw_writeq(0, port); + } + + for (idx = 0; idx < MAC_HASH_COUNT; idx++) { + port = sc->sbm_base + R_MAC_HASH_BASE+(idx*sizeof(uint64_t)); + __raw_writeq(0, port); + } + + /* + * Clear the filter to say we don't want any multicasts. + */ + + reg = __raw_readq(sc->sbm_rxfilter); + reg &= ~(M_MAC_MCAST_INV | M_MAC_MCAST_EN); + __raw_writeq(reg, sc->sbm_rxfilter); + + if (dev->flags & IFF_ALLMULTI) { + /* + * Enable ALL multicasts. Do this by inverting the + * multicast enable bit. + */ + reg = __raw_readq(sc->sbm_rxfilter); + reg |= (M_MAC_MCAST_INV | M_MAC_MCAST_EN); + __raw_writeq(reg, sc->sbm_rxfilter); + return; + } + + + /* + * Progam new multicast entries. For now, only use the + * perfect filter. In the future we'll need to use the + * hash filter if the perfect filter overflows + */ + + /* XXX only using perfect filter for now, need to use hash + * XXX if the table overflows */ + + idx = 1; /* skip station address */ + netdev_for_each_mc_addr(ha, dev) { + if (idx == MAC_ADDR_COUNT) + break; + reg = sbmac_addr2reg(ha->addr); + port = sc->sbm_base + R_MAC_ADDR_BASE+(idx * sizeof(uint64_t)); + __raw_writeq(reg, port); + idx++; + } + + /* + * Enable the "accept multicast bits" if we programmed at least one + * multicast. + */ + + if (idx > 1) { + reg = __raw_readq(sc->sbm_rxfilter); + reg |= M_MAC_MCAST_EN; + __raw_writeq(reg, sc->sbm_rxfilter); + } +} + +static const struct net_device_ops sbmac_netdev_ops = { + .ndo_open = sbmac_open, + .ndo_stop = sbmac_close, + .ndo_start_xmit = sbmac_start_tx, + .ndo_set_rx_mode = sbmac_set_rx_mode, + .ndo_tx_timeout = sbmac_tx_timeout, + .ndo_eth_ioctl = sbmac_mii_ioctl, + .ndo_validate_addr = eth_validate_addr, + .ndo_set_mac_address = eth_mac_addr, +#ifdef CONFIG_NET_POLL_CONTROLLER + .ndo_poll_controller = sbmac_netpoll, +#endif +}; + +/********************************************************************** + * SBMAC_INIT(dev) + * + * Attach routine - init hardware and hook ourselves into linux + * + * Input parameters: + * dev - net_device structure + * + * Return value: + * status + ********************************************************************* */ + +static int sbmac_init(struct platform_device *pldev, long long base) +{ + struct net_device *dev = platform_get_drvdata(pldev); + int idx = pldev->id; + struct sbmac_softc *sc = netdev_priv(dev); + unsigned char *eaddr; + uint64_t ea_reg; + int i; + int err; + + sc->sbm_dev = dev; + sc->sbe_idx = idx; + + eaddr = sc->sbm_hwaddr; + + /* + * Read the ethernet address. The firmware left this programmed + * for us in the ethernet address register for each mac. + */ + + ea_reg = __raw_readq(sc->sbm_base + R_MAC_ETHERNET_ADDR); + __raw_writeq(0, sc->sbm_base + R_MAC_ETHERNET_ADDR); + for (i = 0; i < 6; i++) { + eaddr[i] = (uint8_t) (ea_reg & 0xFF); + ea_reg >>= 8; + } + + eth_hw_addr_set(dev, eaddr); + + /* + * Initialize context (get pointers to registers and stuff), then + * allocate the memory for the descriptor tables. + */ + + sbmac_initctx(sc); + + /* + * Set up Linux device callins + */ + + spin_lock_init(&(sc->sbm_lock)); + + dev->netdev_ops = &sbmac_netdev_ops; + dev->watchdog_timeo = TX_TIMEOUT; + dev->min_mtu = 0; + dev->max_mtu = ENET_PACKET_SIZE; + + netif_napi_add_weight(dev, &sc->napi, sbmac_poll, 16); + + dev->irq = UNIT_INT(idx); + + /* This is needed for PASS2 for Rx H/W checksum feature */ + sbmac_set_iphdr_offset(sc); + + sc->mii_bus = mdiobus_alloc(); + if (sc->mii_bus == NULL) { + err = -ENOMEM; + goto uninit_ctx; + } + + sc->mii_bus->name = sbmac_mdio_string; + snprintf(sc->mii_bus->id, MII_BUS_ID_SIZE, "%s-%x", + pldev->name, idx); + sc->mii_bus->priv = sc; + sc->mii_bus->read = sbmac_mii_read; + sc->mii_bus->write = sbmac_mii_write; + + sc->mii_bus->parent = &pldev->dev; + /* + * Probe PHY address + */ + err = mdiobus_register(sc->mii_bus); + if (err) { + printk(KERN_ERR "%s: unable to register MDIO bus\n", + dev->name); + goto free_mdio; + } + platform_set_drvdata(pldev, sc->mii_bus); + + err = register_netdev(dev); + if (err) { + printk(KERN_ERR "%s.%d: unable to register netdev\n", + sbmac_string, idx); + goto unreg_mdio; + } + + pr_info("%s.%d: registered as %s\n", sbmac_string, idx, dev->name); + + if (sc->rx_hw_checksum == ENABLE) + pr_info("%s: enabling TCP rcv checksum\n", dev->name); + + /* + * Display Ethernet address (this is called during the config + * process so we need to finish off the config message that + * was being displayed) + */ + pr_info("%s: SiByte Ethernet at 0x%08Lx, address: %pM\n", + dev->name, base, eaddr); + + return 0; +unreg_mdio: + mdiobus_unregister(sc->mii_bus); +free_mdio: + mdiobus_free(sc->mii_bus); +uninit_ctx: + sbmac_uninitctx(sc); + return err; +} + + +static int sbmac_open(struct net_device *dev) +{ + struct sbmac_softc *sc = netdev_priv(dev); + int err; + + if (debug > 1) + pr_debug("%s: sbmac_open() irq %d.\n", dev->name, dev->irq); + + /* + * map/route interrupt (clear status first, in case something + * weird is pending; we haven't initialized the mac registers + * yet) + */ + + __raw_readq(sc->sbm_isr); + err = request_irq(dev->irq, sbmac_intr, IRQF_SHARED, dev->name, dev); + if (err) { + printk(KERN_ERR "%s: unable to get IRQ %d\n", dev->name, + dev->irq); + goto out_err; + } + + sc->sbm_speed = sbmac_speed_none; + sc->sbm_duplex = sbmac_duplex_none; + sc->sbm_fc = sbmac_fc_none; + sc->sbm_pause = -1; + sc->sbm_link = 0; + + /* + * Attach to the PHY + */ + err = sbmac_mii_probe(dev); + if (err) + goto out_unregister; + + /* + * Turn on the channel + */ + + sbmac_set_channel_state(sc,sbmac_state_on); + + netif_start_queue(dev); + + sbmac_set_rx_mode(dev); + + phy_start(sc->phy_dev); + + napi_enable(&sc->napi); + + return 0; + +out_unregister: + free_irq(dev->irq, dev); +out_err: + return err; +} + +static int sbmac_mii_probe(struct net_device *dev) +{ + struct sbmac_softc *sc = netdev_priv(dev); + struct phy_device *phy_dev; + + phy_dev = phy_find_first(sc->mii_bus); + if (!phy_dev) { + printk(KERN_ERR "%s: no PHY found\n", dev->name); + return -ENXIO; + } + + phy_dev = phy_connect(dev, dev_name(&phy_dev->mdio.dev), + &sbmac_mii_poll, PHY_INTERFACE_MODE_GMII); + if (IS_ERR(phy_dev)) { + printk(KERN_ERR "%s: could not attach to PHY\n", dev->name); + return PTR_ERR(phy_dev); + } + + /* Remove any features not supported by the controller */ + phy_set_max_speed(phy_dev, SPEED_1000); + phy_support_asym_pause(phy_dev); + + phy_attached_info(phy_dev); + + sc->phy_dev = phy_dev; + + return 0; +} + + +static void sbmac_mii_poll(struct net_device *dev) +{ + struct sbmac_softc *sc = netdev_priv(dev); + struct phy_device *phy_dev = sc->phy_dev; + unsigned long flags; + enum sbmac_fc fc; + int link_chg, speed_chg, duplex_chg, pause_chg, fc_chg; + + link_chg = (sc->sbm_link != phy_dev->link); + speed_chg = (sc->sbm_speed != phy_dev->speed); + duplex_chg = (sc->sbm_duplex != phy_dev->duplex); + pause_chg = (sc->sbm_pause != phy_dev->pause); + + if (!link_chg && !speed_chg && !duplex_chg && !pause_chg) + return; /* Hmmm... */ + + if (!phy_dev->link) { + if (link_chg) { + sc->sbm_link = phy_dev->link; + sc->sbm_speed = sbmac_speed_none; + sc->sbm_duplex = sbmac_duplex_none; + sc->sbm_fc = sbmac_fc_disabled; + sc->sbm_pause = -1; + pr_info("%s: link unavailable\n", dev->name); + } + return; + } + + if (phy_dev->duplex == DUPLEX_FULL) { + if (phy_dev->pause) + fc = sbmac_fc_frame; + else + fc = sbmac_fc_disabled; + } else + fc = sbmac_fc_collision; + fc_chg = (sc->sbm_fc != fc); + + pr_info("%s: link available: %dbase-%cD\n", dev->name, phy_dev->speed, + phy_dev->duplex == DUPLEX_FULL ? 'F' : 'H'); + + spin_lock_irqsave(&sc->sbm_lock, flags); + + sc->sbm_speed = phy_dev->speed; + sc->sbm_duplex = phy_dev->duplex; + sc->sbm_fc = fc; + sc->sbm_pause = phy_dev->pause; + sc->sbm_link = phy_dev->link; + + if ((speed_chg || duplex_chg || fc_chg) && + sc->sbm_state != sbmac_state_off) { + /* + * something changed, restart the channel + */ + if (debug > 1) + pr_debug("%s: restarting channel " + "because PHY state changed\n", dev->name); + sbmac_channel_stop(sc); + sbmac_channel_start(sc); + } + + spin_unlock_irqrestore(&sc->sbm_lock, flags); +} + + +static void sbmac_tx_timeout (struct net_device *dev, unsigned int txqueue) +{ + struct sbmac_softc *sc = netdev_priv(dev); + unsigned long flags; + + spin_lock_irqsave(&sc->sbm_lock, flags); + + + netif_trans_update(dev); /* prevent tx timeout */ + dev->stats.tx_errors++; + + spin_unlock_irqrestore(&sc->sbm_lock, flags); + + printk (KERN_WARNING "%s: Transmit timed out\n",dev->name); +} + + + + +static void sbmac_set_rx_mode(struct net_device *dev) +{ + unsigned long flags; + struct sbmac_softc *sc = netdev_priv(dev); + + spin_lock_irqsave(&sc->sbm_lock, flags); + if ((dev->flags ^ sc->sbm_devflags) & IFF_PROMISC) { + /* + * Promiscuous changed. + */ + + if (dev->flags & IFF_PROMISC) { + sbmac_promiscuous_mode(sc,1); + } + else { + sbmac_promiscuous_mode(sc,0); + } + } + spin_unlock_irqrestore(&sc->sbm_lock, flags); + + /* + * Program the multicasts. Do this every time. + */ + + sbmac_setmulti(sc); + +} + +static int sbmac_mii_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) +{ + struct sbmac_softc *sc = netdev_priv(dev); + + if (!netif_running(dev) || !sc->phy_dev) + return -EINVAL; + + return phy_mii_ioctl(sc->phy_dev, rq, cmd); +} + +static int sbmac_close(struct net_device *dev) +{ + struct sbmac_softc *sc = netdev_priv(dev); + + napi_disable(&sc->napi); + + phy_stop(sc->phy_dev); + + sbmac_set_channel_state(sc, sbmac_state_off); + + netif_stop_queue(dev); + + if (debug > 1) + pr_debug("%s: Shutting down ethercard\n", dev->name); + + phy_disconnect(sc->phy_dev); + sc->phy_dev = NULL; + free_irq(dev->irq, dev); + + sbdma_emptyring(&(sc->sbm_txdma)); + sbdma_emptyring(&(sc->sbm_rxdma)); + + return 0; +} + +static int sbmac_poll(struct napi_struct *napi, int budget) +{ + struct sbmac_softc *sc = container_of(napi, struct sbmac_softc, napi); + int work_done; + + work_done = sbdma_rx_process(sc, &(sc->sbm_rxdma), budget, 1); + sbdma_tx_process(sc, &(sc->sbm_txdma), 1); + + if (work_done < budget) { + napi_complete_done(napi, work_done); + +#ifdef CONFIG_SBMAC_COALESCE + __raw_writeq(((M_MAC_INT_EOP_COUNT | M_MAC_INT_EOP_TIMER) << S_MAC_TX_CH0) | + ((M_MAC_INT_EOP_COUNT | M_MAC_INT_EOP_TIMER) << S_MAC_RX_CH0), + sc->sbm_imr); +#else + __raw_writeq((M_MAC_INT_CHANNEL << S_MAC_TX_CH0) | + (M_MAC_INT_CHANNEL << S_MAC_RX_CH0), sc->sbm_imr); +#endif + } + + return work_done; +} + + +static int sbmac_probe(struct platform_device *pldev) +{ + struct net_device *dev; + struct sbmac_softc *sc; + void __iomem *sbm_base; + struct resource *res; + u64 sbmac_orig_hwaddr; + int err; + + res = platform_get_resource(pldev, IORESOURCE_MEM, 0); + if (!res) { + printk(KERN_ERR "%s: failed to get resource\n", + dev_name(&pldev->dev)); + err = -EINVAL; + goto out_out; + } + sbm_base = ioremap(res->start, resource_size(res)); + if (!sbm_base) { + printk(KERN_ERR "%s: unable to map device registers\n", + dev_name(&pldev->dev)); + err = -ENOMEM; + goto out_out; + } + + /* + * The R_MAC_ETHERNET_ADDR register will be set to some nonzero + * value for us by the firmware if we're going to use this MAC. + * If we find a zero, skip this MAC. + */ + sbmac_orig_hwaddr = __raw_readq(sbm_base + R_MAC_ETHERNET_ADDR); + pr_debug("%s: %sconfiguring MAC at 0x%08Lx\n", dev_name(&pldev->dev), + sbmac_orig_hwaddr ? "" : "not ", (long long)res->start); + if (sbmac_orig_hwaddr == 0) { + err = 0; + goto out_unmap; + } + + /* + * Okay, cool. Initialize this MAC. + */ + dev = alloc_etherdev(sizeof(struct sbmac_softc)); + if (!dev) { + err = -ENOMEM; + goto out_unmap; + } + + platform_set_drvdata(pldev, dev); + SET_NETDEV_DEV(dev, &pldev->dev); + + sc = netdev_priv(dev); + sc->sbm_base = sbm_base; + + err = sbmac_init(pldev, res->start); + if (err) + goto out_kfree; + + return 0; + +out_kfree: + free_netdev(dev); + __raw_writeq(sbmac_orig_hwaddr, sbm_base + R_MAC_ETHERNET_ADDR); + +out_unmap: + iounmap(sbm_base); + +out_out: + return err; +} + +static int sbmac_remove(struct platform_device *pldev) +{ + struct net_device *dev = platform_get_drvdata(pldev); + struct sbmac_softc *sc = netdev_priv(dev); + + unregister_netdev(dev); + sbmac_uninitctx(sc); + mdiobus_unregister(sc->mii_bus); + mdiobus_free(sc->mii_bus); + iounmap(sc->sbm_base); + free_netdev(dev); + + return 0; +} + +static struct platform_driver sbmac_driver = { + .probe = sbmac_probe, + .remove = sbmac_remove, + .driver = { + .name = sbmac_string, + }, +}; + +module_platform_driver(sbmac_driver); +MODULE_LICENSE("GPL"); |