summaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/intel/e1000e/82571.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/ethernet/intel/e1000e/82571.c')
-rw-r--r--drivers/net/ethernet/intel/e1000e/82571.c2049
1 files changed, 2049 insertions, 0 deletions
diff --git a/drivers/net/ethernet/intel/e1000e/82571.c b/drivers/net/ethernet/intel/e1000e/82571.c
new file mode 100644
index 000000000..0b1e890dd
--- /dev/null
+++ b/drivers/net/ethernet/intel/e1000e/82571.c
@@ -0,0 +1,2049 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright(c) 1999 - 2018 Intel Corporation. */
+
+/* 82571EB Gigabit Ethernet Controller
+ * 82571EB Gigabit Ethernet Controller (Copper)
+ * 82571EB Gigabit Ethernet Controller (Fiber)
+ * 82571EB Dual Port Gigabit Mezzanine Adapter
+ * 82571EB Quad Port Gigabit Mezzanine Adapter
+ * 82571PT Gigabit PT Quad Port Server ExpressModule
+ * 82572EI Gigabit Ethernet Controller (Copper)
+ * 82572EI Gigabit Ethernet Controller (Fiber)
+ * 82572EI Gigabit Ethernet Controller
+ * 82573V Gigabit Ethernet Controller (Copper)
+ * 82573E Gigabit Ethernet Controller (Copper)
+ * 82573L Gigabit Ethernet Controller
+ * 82574L Gigabit Network Connection
+ * 82583V Gigabit Network Connection
+ */
+
+#include "e1000.h"
+
+static s32 e1000_get_phy_id_82571(struct e1000_hw *hw);
+static s32 e1000_setup_copper_link_82571(struct e1000_hw *hw);
+static s32 e1000_setup_fiber_serdes_link_82571(struct e1000_hw *hw);
+static s32 e1000_check_for_serdes_link_82571(struct e1000_hw *hw);
+static s32 e1000_write_nvm_eewr_82571(struct e1000_hw *hw, u16 offset,
+ u16 words, u16 *data);
+static s32 e1000_fix_nvm_checksum_82571(struct e1000_hw *hw);
+static void e1000_initialize_hw_bits_82571(struct e1000_hw *hw);
+static void e1000_clear_hw_cntrs_82571(struct e1000_hw *hw);
+static bool e1000_check_mng_mode_82574(struct e1000_hw *hw);
+static s32 e1000_led_on_82574(struct e1000_hw *hw);
+static void e1000_put_hw_semaphore_82571(struct e1000_hw *hw);
+static void e1000_power_down_phy_copper_82571(struct e1000_hw *hw);
+static void e1000_put_hw_semaphore_82573(struct e1000_hw *hw);
+static s32 e1000_get_hw_semaphore_82574(struct e1000_hw *hw);
+static void e1000_put_hw_semaphore_82574(struct e1000_hw *hw);
+static s32 e1000_set_d0_lplu_state_82574(struct e1000_hw *hw, bool active);
+static s32 e1000_set_d3_lplu_state_82574(struct e1000_hw *hw, bool active);
+
+/**
+ * e1000_init_phy_params_82571 - Init PHY func ptrs.
+ * @hw: pointer to the HW structure
+ **/
+static s32 e1000_init_phy_params_82571(struct e1000_hw *hw)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ s32 ret_val;
+
+ if (hw->phy.media_type != e1000_media_type_copper) {
+ phy->type = e1000_phy_none;
+ return 0;
+ }
+
+ phy->addr = 1;
+ phy->autoneg_mask = AUTONEG_ADVERTISE_SPEED_DEFAULT;
+ phy->reset_delay_us = 100;
+
+ phy->ops.power_up = e1000_power_up_phy_copper;
+ phy->ops.power_down = e1000_power_down_phy_copper_82571;
+
+ switch (hw->mac.type) {
+ case e1000_82571:
+ case e1000_82572:
+ phy->type = e1000_phy_igp_2;
+ break;
+ case e1000_82573:
+ phy->type = e1000_phy_m88;
+ break;
+ case e1000_82574:
+ case e1000_82583:
+ phy->type = e1000_phy_bm;
+ phy->ops.acquire = e1000_get_hw_semaphore_82574;
+ phy->ops.release = e1000_put_hw_semaphore_82574;
+ phy->ops.set_d0_lplu_state = e1000_set_d0_lplu_state_82574;
+ phy->ops.set_d3_lplu_state = e1000_set_d3_lplu_state_82574;
+ break;
+ default:
+ return -E1000_ERR_PHY;
+ }
+
+ /* This can only be done after all function pointers are setup. */
+ ret_val = e1000_get_phy_id_82571(hw);
+ if (ret_val) {
+ e_dbg("Error getting PHY ID\n");
+ return ret_val;
+ }
+
+ /* Verify phy id */
+ switch (hw->mac.type) {
+ case e1000_82571:
+ case e1000_82572:
+ if (phy->id != IGP01E1000_I_PHY_ID)
+ ret_val = -E1000_ERR_PHY;
+ break;
+ case e1000_82573:
+ if (phy->id != M88E1111_I_PHY_ID)
+ ret_val = -E1000_ERR_PHY;
+ break;
+ case e1000_82574:
+ case e1000_82583:
+ if (phy->id != BME1000_E_PHY_ID_R2)
+ ret_val = -E1000_ERR_PHY;
+ break;
+ default:
+ ret_val = -E1000_ERR_PHY;
+ break;
+ }
+
+ if (ret_val)
+ e_dbg("PHY ID unknown: type = 0x%08x\n", phy->id);
+
+ return ret_val;
+}
+
+/**
+ * e1000_init_nvm_params_82571 - Init NVM func ptrs.
+ * @hw: pointer to the HW structure
+ **/
+static s32 e1000_init_nvm_params_82571(struct e1000_hw *hw)
+{
+ struct e1000_nvm_info *nvm = &hw->nvm;
+ u32 eecd = er32(EECD);
+ u16 size;
+
+ nvm->opcode_bits = 8;
+ nvm->delay_usec = 1;
+ switch (nvm->override) {
+ case e1000_nvm_override_spi_large:
+ nvm->page_size = 32;
+ nvm->address_bits = 16;
+ break;
+ case e1000_nvm_override_spi_small:
+ nvm->page_size = 8;
+ nvm->address_bits = 8;
+ break;
+ default:
+ nvm->page_size = eecd & E1000_EECD_ADDR_BITS ? 32 : 8;
+ nvm->address_bits = eecd & E1000_EECD_ADDR_BITS ? 16 : 8;
+ break;
+ }
+
+ switch (hw->mac.type) {
+ case e1000_82573:
+ case e1000_82574:
+ case e1000_82583:
+ if (((eecd >> 15) & 0x3) == 0x3) {
+ nvm->type = e1000_nvm_flash_hw;
+ nvm->word_size = 2048;
+ /* Autonomous Flash update bit must be cleared due
+ * to Flash update issue.
+ */
+ eecd &= ~E1000_EECD_AUPDEN;
+ ew32(EECD, eecd);
+ break;
+ }
+ fallthrough;
+ default:
+ nvm->type = e1000_nvm_eeprom_spi;
+ size = (u16)((eecd & E1000_EECD_SIZE_EX_MASK) >>
+ E1000_EECD_SIZE_EX_SHIFT);
+ /* Added to a constant, "size" becomes the left-shift value
+ * for setting word_size.
+ */
+ size += NVM_WORD_SIZE_BASE_SHIFT;
+
+ /* EEPROM access above 16k is unsupported */
+ if (size > 14)
+ size = 14;
+ nvm->word_size = BIT(size);
+ break;
+ }
+
+ /* Function Pointers */
+ switch (hw->mac.type) {
+ case e1000_82574:
+ case e1000_82583:
+ nvm->ops.acquire = e1000_get_hw_semaphore_82574;
+ nvm->ops.release = e1000_put_hw_semaphore_82574;
+ break;
+ default:
+ break;
+ }
+
+ return 0;
+}
+
+/**
+ * e1000_init_mac_params_82571 - Init MAC func ptrs.
+ * @hw: pointer to the HW structure
+ **/
+static s32 e1000_init_mac_params_82571(struct e1000_hw *hw)
+{
+ struct e1000_mac_info *mac = &hw->mac;
+ u32 swsm = 0;
+ u32 swsm2 = 0;
+ bool force_clear_smbi = false;
+
+ /* Set media type and media-dependent function pointers */
+ switch (hw->adapter->pdev->device) {
+ case E1000_DEV_ID_82571EB_FIBER:
+ case E1000_DEV_ID_82572EI_FIBER:
+ case E1000_DEV_ID_82571EB_QUAD_FIBER:
+ hw->phy.media_type = e1000_media_type_fiber;
+ mac->ops.setup_physical_interface =
+ e1000_setup_fiber_serdes_link_82571;
+ mac->ops.check_for_link = e1000e_check_for_fiber_link;
+ mac->ops.get_link_up_info =
+ e1000e_get_speed_and_duplex_fiber_serdes;
+ break;
+ case E1000_DEV_ID_82571EB_SERDES:
+ case E1000_DEV_ID_82571EB_SERDES_DUAL:
+ case E1000_DEV_ID_82571EB_SERDES_QUAD:
+ case E1000_DEV_ID_82572EI_SERDES:
+ hw->phy.media_type = e1000_media_type_internal_serdes;
+ mac->ops.setup_physical_interface =
+ e1000_setup_fiber_serdes_link_82571;
+ mac->ops.check_for_link = e1000_check_for_serdes_link_82571;
+ mac->ops.get_link_up_info =
+ e1000e_get_speed_and_duplex_fiber_serdes;
+ break;
+ default:
+ hw->phy.media_type = e1000_media_type_copper;
+ mac->ops.setup_physical_interface =
+ e1000_setup_copper_link_82571;
+ mac->ops.check_for_link = e1000e_check_for_copper_link;
+ mac->ops.get_link_up_info = e1000e_get_speed_and_duplex_copper;
+ break;
+ }
+
+ /* Set mta register count */
+ mac->mta_reg_count = 128;
+ /* Set rar entry count */
+ mac->rar_entry_count = E1000_RAR_ENTRIES;
+ /* Adaptive IFS supported */
+ mac->adaptive_ifs = true;
+
+ /* MAC-specific function pointers */
+ switch (hw->mac.type) {
+ case e1000_82573:
+ mac->ops.set_lan_id = e1000_set_lan_id_single_port;
+ mac->ops.check_mng_mode = e1000e_check_mng_mode_generic;
+ mac->ops.led_on = e1000e_led_on_generic;
+ mac->ops.blink_led = e1000e_blink_led_generic;
+
+ /* FWSM register */
+ mac->has_fwsm = true;
+ /* ARC supported; valid only if manageability features are
+ * enabled.
+ */
+ mac->arc_subsystem_valid = !!(er32(FWSM) &
+ E1000_FWSM_MODE_MASK);
+ break;
+ case e1000_82574:
+ case e1000_82583:
+ mac->ops.set_lan_id = e1000_set_lan_id_single_port;
+ mac->ops.check_mng_mode = e1000_check_mng_mode_82574;
+ mac->ops.led_on = e1000_led_on_82574;
+ break;
+ default:
+ mac->ops.check_mng_mode = e1000e_check_mng_mode_generic;
+ mac->ops.led_on = e1000e_led_on_generic;
+ mac->ops.blink_led = e1000e_blink_led_generic;
+
+ /* FWSM register */
+ mac->has_fwsm = true;
+ break;
+ }
+
+ /* Ensure that the inter-port SWSM.SMBI lock bit is clear before
+ * first NVM or PHY access. This should be done for single-port
+ * devices, and for one port only on dual-port devices so that
+ * for those devices we can still use the SMBI lock to synchronize
+ * inter-port accesses to the PHY & NVM.
+ */
+ switch (hw->mac.type) {
+ case e1000_82571:
+ case e1000_82572:
+ swsm2 = er32(SWSM2);
+
+ if (!(swsm2 & E1000_SWSM2_LOCK)) {
+ /* Only do this for the first interface on this card */
+ ew32(SWSM2, swsm2 | E1000_SWSM2_LOCK);
+ force_clear_smbi = true;
+ } else {
+ force_clear_smbi = false;
+ }
+ break;
+ default:
+ force_clear_smbi = true;
+ break;
+ }
+
+ if (force_clear_smbi) {
+ /* Make sure SWSM.SMBI is clear */
+ swsm = er32(SWSM);
+ if (swsm & E1000_SWSM_SMBI) {
+ /* This bit should not be set on a first interface, and
+ * indicates that the bootagent or EFI code has
+ * improperly left this bit enabled
+ */
+ e_dbg("Please update your 82571 Bootagent\n");
+ }
+ ew32(SWSM, swsm & ~E1000_SWSM_SMBI);
+ }
+
+ /* Initialize device specific counter of SMBI acquisition timeouts. */
+ hw->dev_spec.e82571.smb_counter = 0;
+
+ return 0;
+}
+
+static s32 e1000_get_variants_82571(struct e1000_adapter *adapter)
+{
+ struct e1000_hw *hw = &adapter->hw;
+ static int global_quad_port_a; /* global port a indication */
+ struct pci_dev *pdev = adapter->pdev;
+ int is_port_b = er32(STATUS) & E1000_STATUS_FUNC_1;
+ s32 rc;
+
+ rc = e1000_init_mac_params_82571(hw);
+ if (rc)
+ return rc;
+
+ rc = e1000_init_nvm_params_82571(hw);
+ if (rc)
+ return rc;
+
+ rc = e1000_init_phy_params_82571(hw);
+ if (rc)
+ return rc;
+
+ /* tag quad port adapters first, it's used below */
+ switch (pdev->device) {
+ case E1000_DEV_ID_82571EB_QUAD_COPPER:
+ case E1000_DEV_ID_82571EB_QUAD_FIBER:
+ case E1000_DEV_ID_82571EB_QUAD_COPPER_LP:
+ case E1000_DEV_ID_82571PT_QUAD_COPPER:
+ adapter->flags |= FLAG_IS_QUAD_PORT;
+ /* mark the first port */
+ if (global_quad_port_a == 0)
+ adapter->flags |= FLAG_IS_QUAD_PORT_A;
+ /* Reset for multiple quad port adapters */
+ global_quad_port_a++;
+ if (global_quad_port_a == 4)
+ global_quad_port_a = 0;
+ break;
+ default:
+ break;
+ }
+
+ switch (adapter->hw.mac.type) {
+ case e1000_82571:
+ /* these dual ports don't have WoL on port B at all */
+ if (((pdev->device == E1000_DEV_ID_82571EB_FIBER) ||
+ (pdev->device == E1000_DEV_ID_82571EB_SERDES) ||
+ (pdev->device == E1000_DEV_ID_82571EB_COPPER)) &&
+ (is_port_b))
+ adapter->flags &= ~FLAG_HAS_WOL;
+ /* quad ports only support WoL on port A */
+ if (adapter->flags & FLAG_IS_QUAD_PORT &&
+ (!(adapter->flags & FLAG_IS_QUAD_PORT_A)))
+ adapter->flags &= ~FLAG_HAS_WOL;
+ /* Does not support WoL on any port */
+ if (pdev->device == E1000_DEV_ID_82571EB_SERDES_QUAD)
+ adapter->flags &= ~FLAG_HAS_WOL;
+ break;
+ case e1000_82573:
+ if (pdev->device == E1000_DEV_ID_82573L) {
+ adapter->flags |= FLAG_HAS_JUMBO_FRAMES;
+ adapter->max_hw_frame_size = DEFAULT_JUMBO;
+ }
+ break;
+ default:
+ break;
+ }
+
+ return 0;
+}
+
+/**
+ * e1000_get_phy_id_82571 - Retrieve the PHY ID and revision
+ * @hw: pointer to the HW structure
+ *
+ * Reads the PHY registers and stores the PHY ID and possibly the PHY
+ * revision in the hardware structure.
+ **/
+static s32 e1000_get_phy_id_82571(struct e1000_hw *hw)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ s32 ret_val;
+ u16 phy_id = 0;
+
+ switch (hw->mac.type) {
+ case e1000_82571:
+ case e1000_82572:
+ /* The 82571 firmware may still be configuring the PHY.
+ * In this case, we cannot access the PHY until the
+ * configuration is done. So we explicitly set the
+ * PHY ID.
+ */
+ phy->id = IGP01E1000_I_PHY_ID;
+ break;
+ case e1000_82573:
+ return e1000e_get_phy_id(hw);
+ case e1000_82574:
+ case e1000_82583:
+ ret_val = e1e_rphy(hw, MII_PHYSID1, &phy_id);
+ if (ret_val)
+ return ret_val;
+
+ phy->id = (u32)(phy_id << 16);
+ usleep_range(20, 40);
+ ret_val = e1e_rphy(hw, MII_PHYSID2, &phy_id);
+ if (ret_val)
+ return ret_val;
+
+ phy->id |= (u32)(phy_id);
+ phy->revision = (u32)(phy_id & ~PHY_REVISION_MASK);
+ break;
+ default:
+ return -E1000_ERR_PHY;
+ }
+
+ return 0;
+}
+
+/**
+ * e1000_get_hw_semaphore_82571 - Acquire hardware semaphore
+ * @hw: pointer to the HW structure
+ *
+ * Acquire the HW semaphore to access the PHY or NVM
+ **/
+static s32 e1000_get_hw_semaphore_82571(struct e1000_hw *hw)
+{
+ u32 swsm;
+ s32 sw_timeout = hw->nvm.word_size + 1;
+ s32 fw_timeout = hw->nvm.word_size + 1;
+ s32 i = 0;
+
+ /* If we have timedout 3 times on trying to acquire
+ * the inter-port SMBI semaphore, there is old code
+ * operating on the other port, and it is not
+ * releasing SMBI. Modify the number of times that
+ * we try for the semaphore to interwork with this
+ * older code.
+ */
+ if (hw->dev_spec.e82571.smb_counter > 2)
+ sw_timeout = 1;
+
+ /* Get the SW semaphore */
+ while (i < sw_timeout) {
+ swsm = er32(SWSM);
+ if (!(swsm & E1000_SWSM_SMBI))
+ break;
+
+ usleep_range(50, 100);
+ i++;
+ }
+
+ if (i == sw_timeout) {
+ e_dbg("Driver can't access device - SMBI bit is set.\n");
+ hw->dev_spec.e82571.smb_counter++;
+ }
+ /* Get the FW semaphore. */
+ for (i = 0; i < fw_timeout; i++) {
+ swsm = er32(SWSM);
+ ew32(SWSM, swsm | E1000_SWSM_SWESMBI);
+
+ /* Semaphore acquired if bit latched */
+ if (er32(SWSM) & E1000_SWSM_SWESMBI)
+ break;
+
+ usleep_range(50, 100);
+ }
+
+ if (i == fw_timeout) {
+ /* Release semaphores */
+ e1000_put_hw_semaphore_82571(hw);
+ e_dbg("Driver can't access the NVM\n");
+ return -E1000_ERR_NVM;
+ }
+
+ return 0;
+}
+
+/**
+ * e1000_put_hw_semaphore_82571 - Release hardware semaphore
+ * @hw: pointer to the HW structure
+ *
+ * Release hardware semaphore used to access the PHY or NVM
+ **/
+static void e1000_put_hw_semaphore_82571(struct e1000_hw *hw)
+{
+ u32 swsm;
+
+ swsm = er32(SWSM);
+ swsm &= ~(E1000_SWSM_SMBI | E1000_SWSM_SWESMBI);
+ ew32(SWSM, swsm);
+}
+
+/**
+ * e1000_get_hw_semaphore_82573 - Acquire hardware semaphore
+ * @hw: pointer to the HW structure
+ *
+ * Acquire the HW semaphore during reset.
+ *
+ **/
+static s32 e1000_get_hw_semaphore_82573(struct e1000_hw *hw)
+{
+ u32 extcnf_ctrl;
+ s32 i = 0;
+
+ extcnf_ctrl = er32(EXTCNF_CTRL);
+ do {
+ extcnf_ctrl |= E1000_EXTCNF_CTRL_MDIO_SW_OWNERSHIP;
+ ew32(EXTCNF_CTRL, extcnf_ctrl);
+ extcnf_ctrl = er32(EXTCNF_CTRL);
+
+ if (extcnf_ctrl & E1000_EXTCNF_CTRL_MDIO_SW_OWNERSHIP)
+ break;
+
+ usleep_range(2000, 4000);
+ i++;
+ } while (i < MDIO_OWNERSHIP_TIMEOUT);
+
+ if (i == MDIO_OWNERSHIP_TIMEOUT) {
+ /* Release semaphores */
+ e1000_put_hw_semaphore_82573(hw);
+ e_dbg("Driver can't access the PHY\n");
+ return -E1000_ERR_PHY;
+ }
+
+ return 0;
+}
+
+/**
+ * e1000_put_hw_semaphore_82573 - Release hardware semaphore
+ * @hw: pointer to the HW structure
+ *
+ * Release hardware semaphore used during reset.
+ *
+ **/
+static void e1000_put_hw_semaphore_82573(struct e1000_hw *hw)
+{
+ u32 extcnf_ctrl;
+
+ extcnf_ctrl = er32(EXTCNF_CTRL);
+ extcnf_ctrl &= ~E1000_EXTCNF_CTRL_MDIO_SW_OWNERSHIP;
+ ew32(EXTCNF_CTRL, extcnf_ctrl);
+}
+
+static DEFINE_MUTEX(swflag_mutex);
+
+/**
+ * e1000_get_hw_semaphore_82574 - Acquire hardware semaphore
+ * @hw: pointer to the HW structure
+ *
+ * Acquire the HW semaphore to access the PHY or NVM.
+ *
+ **/
+static s32 e1000_get_hw_semaphore_82574(struct e1000_hw *hw)
+{
+ s32 ret_val;
+
+ mutex_lock(&swflag_mutex);
+ ret_val = e1000_get_hw_semaphore_82573(hw);
+ if (ret_val)
+ mutex_unlock(&swflag_mutex);
+ return ret_val;
+}
+
+/**
+ * e1000_put_hw_semaphore_82574 - Release hardware semaphore
+ * @hw: pointer to the HW structure
+ *
+ * Release hardware semaphore used to access the PHY or NVM
+ *
+ **/
+static void e1000_put_hw_semaphore_82574(struct e1000_hw *hw)
+{
+ e1000_put_hw_semaphore_82573(hw);
+ mutex_unlock(&swflag_mutex);
+}
+
+/**
+ * e1000_set_d0_lplu_state_82574 - Set Low Power Linkup D0 state
+ * @hw: pointer to the HW structure
+ * @active: true to enable LPLU, false to disable
+ *
+ * Sets the LPLU D0 state according to the active flag.
+ * LPLU will not be activated unless the
+ * device autonegotiation advertisement meets standards of
+ * either 10 or 10/100 or 10/100/1000 at all duplexes.
+ * This is a function pointer entry point only called by
+ * PHY setup routines.
+ **/
+static s32 e1000_set_d0_lplu_state_82574(struct e1000_hw *hw, bool active)
+{
+ u32 data = er32(POEMB);
+
+ if (active)
+ data |= E1000_PHY_CTRL_D0A_LPLU;
+ else
+ data &= ~E1000_PHY_CTRL_D0A_LPLU;
+
+ ew32(POEMB, data);
+ return 0;
+}
+
+/**
+ * e1000_set_d3_lplu_state_82574 - Sets low power link up state for D3
+ * @hw: pointer to the HW structure
+ * @active: boolean used to enable/disable lplu
+ *
+ * The low power link up (lplu) state is set to the power management level D3
+ * when active is true, else clear lplu for D3. LPLU
+ * is used during Dx states where the power conservation is most important.
+ * During driver activity, SmartSpeed should be enabled so performance is
+ * maintained.
+ **/
+static s32 e1000_set_d3_lplu_state_82574(struct e1000_hw *hw, bool active)
+{
+ u32 data = er32(POEMB);
+
+ if (!active) {
+ data &= ~E1000_PHY_CTRL_NOND0A_LPLU;
+ } else if ((hw->phy.autoneg_advertised == E1000_ALL_SPEED_DUPLEX) ||
+ (hw->phy.autoneg_advertised == E1000_ALL_NOT_GIG) ||
+ (hw->phy.autoneg_advertised == E1000_ALL_10_SPEED)) {
+ data |= E1000_PHY_CTRL_NOND0A_LPLU;
+ }
+
+ ew32(POEMB, data);
+ return 0;
+}
+
+/**
+ * e1000_acquire_nvm_82571 - Request for access to the EEPROM
+ * @hw: pointer to the HW structure
+ *
+ * To gain access to the EEPROM, first we must obtain a hardware semaphore.
+ * Then for non-82573 hardware, set the EEPROM access request bit and wait
+ * for EEPROM access grant bit. If the access grant bit is not set, release
+ * hardware semaphore.
+ **/
+static s32 e1000_acquire_nvm_82571(struct e1000_hw *hw)
+{
+ s32 ret_val;
+
+ ret_val = e1000_get_hw_semaphore_82571(hw);
+ if (ret_val)
+ return ret_val;
+
+ switch (hw->mac.type) {
+ case e1000_82573:
+ break;
+ default:
+ ret_val = e1000e_acquire_nvm(hw);
+ break;
+ }
+
+ if (ret_val)
+ e1000_put_hw_semaphore_82571(hw);
+
+ return ret_val;
+}
+
+/**
+ * e1000_release_nvm_82571 - Release exclusive access to EEPROM
+ * @hw: pointer to the HW structure
+ *
+ * Stop any current commands to the EEPROM and clear the EEPROM request bit.
+ **/
+static void e1000_release_nvm_82571(struct e1000_hw *hw)
+{
+ e1000e_release_nvm(hw);
+ e1000_put_hw_semaphore_82571(hw);
+}
+
+/**
+ * e1000_write_nvm_82571 - Write to EEPROM using appropriate interface
+ * @hw: pointer to the HW structure
+ * @offset: offset within the EEPROM to be written to
+ * @words: number of words to write
+ * @data: 16 bit word(s) to be written to the EEPROM
+ *
+ * For non-82573 silicon, write data to EEPROM at offset using SPI interface.
+ *
+ * If e1000e_update_nvm_checksum is not called after this function, the
+ * EEPROM will most likely contain an invalid checksum.
+ **/
+static s32 e1000_write_nvm_82571(struct e1000_hw *hw, u16 offset, u16 words,
+ u16 *data)
+{
+ s32 ret_val;
+
+ switch (hw->mac.type) {
+ case e1000_82573:
+ case e1000_82574:
+ case e1000_82583:
+ ret_val = e1000_write_nvm_eewr_82571(hw, offset, words, data);
+ break;
+ case e1000_82571:
+ case e1000_82572:
+ ret_val = e1000e_write_nvm_spi(hw, offset, words, data);
+ break;
+ default:
+ ret_val = -E1000_ERR_NVM;
+ break;
+ }
+
+ return ret_val;
+}
+
+/**
+ * e1000_update_nvm_checksum_82571 - Update EEPROM checksum
+ * @hw: pointer to the HW structure
+ *
+ * Updates the EEPROM checksum by reading/adding each word of the EEPROM
+ * up to the checksum. Then calculates the EEPROM checksum and writes the
+ * value to the EEPROM.
+ **/
+static s32 e1000_update_nvm_checksum_82571(struct e1000_hw *hw)
+{
+ u32 eecd;
+ s32 ret_val;
+ u16 i;
+
+ ret_val = e1000e_update_nvm_checksum_generic(hw);
+ if (ret_val)
+ return ret_val;
+
+ /* If our nvm is an EEPROM, then we're done
+ * otherwise, commit the checksum to the flash NVM.
+ */
+ if (hw->nvm.type != e1000_nvm_flash_hw)
+ return 0;
+
+ /* Check for pending operations. */
+ for (i = 0; i < E1000_FLASH_UPDATES; i++) {
+ usleep_range(1000, 2000);
+ if (!(er32(EECD) & E1000_EECD_FLUPD))
+ break;
+ }
+
+ if (i == E1000_FLASH_UPDATES)
+ return -E1000_ERR_NVM;
+
+ /* Reset the firmware if using STM opcode. */
+ if ((er32(FLOP) & 0xFF00) == E1000_STM_OPCODE) {
+ /* The enabling of and the actual reset must be done
+ * in two write cycles.
+ */
+ ew32(HICR, E1000_HICR_FW_RESET_ENABLE);
+ e1e_flush();
+ ew32(HICR, E1000_HICR_FW_RESET);
+ }
+
+ /* Commit the write to flash */
+ eecd = er32(EECD) | E1000_EECD_FLUPD;
+ ew32(EECD, eecd);
+
+ for (i = 0; i < E1000_FLASH_UPDATES; i++) {
+ usleep_range(1000, 2000);
+ if (!(er32(EECD) & E1000_EECD_FLUPD))
+ break;
+ }
+
+ if (i == E1000_FLASH_UPDATES)
+ return -E1000_ERR_NVM;
+
+ return 0;
+}
+
+/**
+ * e1000_validate_nvm_checksum_82571 - Validate EEPROM checksum
+ * @hw: pointer to the HW structure
+ *
+ * Calculates the EEPROM checksum by reading/adding each word of the EEPROM
+ * and then verifies that the sum of the EEPROM is equal to 0xBABA.
+ **/
+static s32 e1000_validate_nvm_checksum_82571(struct e1000_hw *hw)
+{
+ if (hw->nvm.type == e1000_nvm_flash_hw)
+ e1000_fix_nvm_checksum_82571(hw);
+
+ return e1000e_validate_nvm_checksum_generic(hw);
+}
+
+/**
+ * e1000_write_nvm_eewr_82571 - Write to EEPROM for 82573 silicon
+ * @hw: pointer to the HW structure
+ * @offset: offset within the EEPROM to be written to
+ * @words: number of words to write
+ * @data: 16 bit word(s) to be written to the EEPROM
+ *
+ * After checking for invalid values, poll the EEPROM to ensure the previous
+ * command has completed before trying to write the next word. After write
+ * poll for completion.
+ *
+ * If e1000e_update_nvm_checksum is not called after this function, the
+ * EEPROM will most likely contain an invalid checksum.
+ **/
+static s32 e1000_write_nvm_eewr_82571(struct e1000_hw *hw, u16 offset,
+ u16 words, u16 *data)
+{
+ struct e1000_nvm_info *nvm = &hw->nvm;
+ u32 i, eewr = 0;
+ s32 ret_val = 0;
+
+ /* A check for invalid values: offset too large, too many words,
+ * and not enough words.
+ */
+ if ((offset >= nvm->word_size) || (words > (nvm->word_size - offset)) ||
+ (words == 0)) {
+ e_dbg("nvm parameter(s) out of bounds\n");
+ return -E1000_ERR_NVM;
+ }
+
+ for (i = 0; i < words; i++) {
+ eewr = ((data[i] << E1000_NVM_RW_REG_DATA) |
+ ((offset + i) << E1000_NVM_RW_ADDR_SHIFT) |
+ E1000_NVM_RW_REG_START);
+
+ ret_val = e1000e_poll_eerd_eewr_done(hw, E1000_NVM_POLL_WRITE);
+ if (ret_val)
+ break;
+
+ ew32(EEWR, eewr);
+
+ ret_val = e1000e_poll_eerd_eewr_done(hw, E1000_NVM_POLL_WRITE);
+ if (ret_val)
+ break;
+ }
+
+ return ret_val;
+}
+
+/**
+ * e1000_get_cfg_done_82571 - Poll for configuration done
+ * @hw: pointer to the HW structure
+ *
+ * Reads the management control register for the config done bit to be set.
+ **/
+static s32 e1000_get_cfg_done_82571(struct e1000_hw *hw)
+{
+ s32 timeout = PHY_CFG_TIMEOUT;
+
+ while (timeout) {
+ if (er32(EEMNGCTL) & E1000_NVM_CFG_DONE_PORT_0)
+ break;
+ usleep_range(1000, 2000);
+ timeout--;
+ }
+ if (!timeout) {
+ e_dbg("MNG configuration cycle has not completed.\n");
+ return -E1000_ERR_RESET;
+ }
+
+ return 0;
+}
+
+/**
+ * e1000_set_d0_lplu_state_82571 - Set Low Power Linkup D0 state
+ * @hw: pointer to the HW structure
+ * @active: true to enable LPLU, false to disable
+ *
+ * Sets the LPLU D0 state according to the active flag. When activating LPLU
+ * this function also disables smart speed and vice versa. LPLU will not be
+ * activated unless the device autonegotiation advertisement meets standards
+ * of either 10 or 10/100 or 10/100/1000 at all duplexes. This is a function
+ * pointer entry point only called by PHY setup routines.
+ **/
+static s32 e1000_set_d0_lplu_state_82571(struct e1000_hw *hw, bool active)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ s32 ret_val;
+ u16 data;
+
+ ret_val = e1e_rphy(hw, IGP02E1000_PHY_POWER_MGMT, &data);
+ if (ret_val)
+ return ret_val;
+
+ if (active) {
+ data |= IGP02E1000_PM_D0_LPLU;
+ ret_val = e1e_wphy(hw, IGP02E1000_PHY_POWER_MGMT, data);
+ if (ret_val)
+ return ret_val;
+
+ /* When LPLU is enabled, we should disable SmartSpeed */
+ ret_val = e1e_rphy(hw, IGP01E1000_PHY_PORT_CONFIG, &data);
+ if (ret_val)
+ return ret_val;
+ data &= ~IGP01E1000_PSCFR_SMART_SPEED;
+ ret_val = e1e_wphy(hw, IGP01E1000_PHY_PORT_CONFIG, data);
+ if (ret_val)
+ return ret_val;
+ } else {
+ data &= ~IGP02E1000_PM_D0_LPLU;
+ ret_val = e1e_wphy(hw, IGP02E1000_PHY_POWER_MGMT, data);
+ if (ret_val)
+ return ret_val;
+ /* LPLU and SmartSpeed are mutually exclusive. LPLU is used
+ * during Dx states where the power conservation is most
+ * important. During driver activity we should enable
+ * SmartSpeed, so performance is maintained.
+ */
+ if (phy->smart_speed == e1000_smart_speed_on) {
+ ret_val = e1e_rphy(hw, IGP01E1000_PHY_PORT_CONFIG,
+ &data);
+ if (ret_val)
+ return ret_val;
+
+ data |= IGP01E1000_PSCFR_SMART_SPEED;
+ ret_val = e1e_wphy(hw, IGP01E1000_PHY_PORT_CONFIG,
+ data);
+ if (ret_val)
+ return ret_val;
+ } else if (phy->smart_speed == e1000_smart_speed_off) {
+ ret_val = e1e_rphy(hw, IGP01E1000_PHY_PORT_CONFIG,
+ &data);
+ if (ret_val)
+ return ret_val;
+
+ data &= ~IGP01E1000_PSCFR_SMART_SPEED;
+ ret_val = e1e_wphy(hw, IGP01E1000_PHY_PORT_CONFIG,
+ data);
+ if (ret_val)
+ return ret_val;
+ }
+ }
+
+ return 0;
+}
+
+/**
+ * e1000_reset_hw_82571 - Reset hardware
+ * @hw: pointer to the HW structure
+ *
+ * This resets the hardware into a known state.
+ **/
+static s32 e1000_reset_hw_82571(struct e1000_hw *hw)
+{
+ u32 ctrl, ctrl_ext, eecd, tctl;
+ s32 ret_val;
+
+ /* Prevent the PCI-E bus from sticking if there is no TLP connection
+ * on the last TLP read/write transaction when MAC is reset.
+ */
+ ret_val = e1000e_disable_pcie_master(hw);
+ if (ret_val)
+ e_dbg("PCI-E Master disable polling has failed.\n");
+
+ e_dbg("Masking off all interrupts\n");
+ ew32(IMC, 0xffffffff);
+
+ ew32(RCTL, 0);
+ tctl = er32(TCTL);
+ tctl &= ~E1000_TCTL_EN;
+ ew32(TCTL, tctl);
+ e1e_flush();
+
+ usleep_range(10000, 11000);
+
+ /* Must acquire the MDIO ownership before MAC reset.
+ * Ownership defaults to firmware after a reset.
+ */
+ switch (hw->mac.type) {
+ case e1000_82573:
+ ret_val = e1000_get_hw_semaphore_82573(hw);
+ break;
+ case e1000_82574:
+ case e1000_82583:
+ ret_val = e1000_get_hw_semaphore_82574(hw);
+ break;
+ default:
+ break;
+ }
+
+ ctrl = er32(CTRL);
+
+ e_dbg("Issuing a global reset to MAC\n");
+ ew32(CTRL, ctrl | E1000_CTRL_RST);
+
+ /* Must release MDIO ownership and mutex after MAC reset. */
+ switch (hw->mac.type) {
+ case e1000_82573:
+ /* Release mutex only if the hw semaphore is acquired */
+ if (!ret_val)
+ e1000_put_hw_semaphore_82573(hw);
+ break;
+ case e1000_82574:
+ case e1000_82583:
+ /* Release mutex only if the hw semaphore is acquired */
+ if (!ret_val)
+ e1000_put_hw_semaphore_82574(hw);
+ break;
+ default:
+ break;
+ }
+
+ if (hw->nvm.type == e1000_nvm_flash_hw) {
+ usleep_range(10, 20);
+ ctrl_ext = er32(CTRL_EXT);
+ ctrl_ext |= E1000_CTRL_EXT_EE_RST;
+ ew32(CTRL_EXT, ctrl_ext);
+ e1e_flush();
+ }
+
+ ret_val = e1000e_get_auto_rd_done(hw);
+ if (ret_val)
+ /* We don't want to continue accessing MAC registers. */
+ return ret_val;
+
+ /* Phy configuration from NVM just starts after EECD_AUTO_RD is set.
+ * Need to wait for Phy configuration completion before accessing
+ * NVM and Phy.
+ */
+
+ switch (hw->mac.type) {
+ case e1000_82571:
+ case e1000_82572:
+ /* REQ and GNT bits need to be cleared when using AUTO_RD
+ * to access the EEPROM.
+ */
+ eecd = er32(EECD);
+ eecd &= ~(E1000_EECD_REQ | E1000_EECD_GNT);
+ ew32(EECD, eecd);
+ break;
+ case e1000_82573:
+ case e1000_82574:
+ case e1000_82583:
+ msleep(25);
+ break;
+ default:
+ break;
+ }
+
+ /* Clear any pending interrupt events. */
+ ew32(IMC, 0xffffffff);
+ er32(ICR);
+
+ if (hw->mac.type == e1000_82571) {
+ /* Install any alternate MAC address into RAR0 */
+ ret_val = e1000_check_alt_mac_addr_generic(hw);
+ if (ret_val)
+ return ret_val;
+
+ e1000e_set_laa_state_82571(hw, true);
+ }
+
+ /* Reinitialize the 82571 serdes link state machine */
+ if (hw->phy.media_type == e1000_media_type_internal_serdes)
+ hw->mac.serdes_link_state = e1000_serdes_link_down;
+
+ return 0;
+}
+
+/**
+ * e1000_init_hw_82571 - Initialize hardware
+ * @hw: pointer to the HW structure
+ *
+ * This inits the hardware readying it for operation.
+ **/
+static s32 e1000_init_hw_82571(struct e1000_hw *hw)
+{
+ struct e1000_mac_info *mac = &hw->mac;
+ u32 reg_data;
+ s32 ret_val;
+ u16 i, rar_count = mac->rar_entry_count;
+
+ e1000_initialize_hw_bits_82571(hw);
+
+ /* Initialize identification LED */
+ ret_val = mac->ops.id_led_init(hw);
+ /* An error is not fatal and we should not stop init due to this */
+ if (ret_val)
+ e_dbg("Error initializing identification LED\n");
+
+ /* Disabling VLAN filtering */
+ e_dbg("Initializing the IEEE VLAN\n");
+ mac->ops.clear_vfta(hw);
+
+ /* Setup the receive address.
+ * If, however, a locally administered address was assigned to the
+ * 82571, we must reserve a RAR for it to work around an issue where
+ * resetting one port will reload the MAC on the other port.
+ */
+ if (e1000e_get_laa_state_82571(hw))
+ rar_count--;
+ e1000e_init_rx_addrs(hw, rar_count);
+
+ /* Zero out the Multicast HASH table */
+ e_dbg("Zeroing the MTA\n");
+ for (i = 0; i < mac->mta_reg_count; i++)
+ E1000_WRITE_REG_ARRAY(hw, E1000_MTA, i, 0);
+
+ /* Setup link and flow control */
+ ret_val = mac->ops.setup_link(hw);
+
+ /* Set the transmit descriptor write-back policy */
+ reg_data = er32(TXDCTL(0));
+ reg_data = ((reg_data & ~E1000_TXDCTL_WTHRESH) |
+ E1000_TXDCTL_FULL_TX_DESC_WB | E1000_TXDCTL_COUNT_DESC);
+ ew32(TXDCTL(0), reg_data);
+
+ /* ...for both queues. */
+ switch (mac->type) {
+ case e1000_82573:
+ e1000e_enable_tx_pkt_filtering(hw);
+ fallthrough;
+ case e1000_82574:
+ case e1000_82583:
+ reg_data = er32(GCR);
+ reg_data |= E1000_GCR_L1_ACT_WITHOUT_L0S_RX;
+ ew32(GCR, reg_data);
+ break;
+ default:
+ reg_data = er32(TXDCTL(1));
+ reg_data = ((reg_data & ~E1000_TXDCTL_WTHRESH) |
+ E1000_TXDCTL_FULL_TX_DESC_WB |
+ E1000_TXDCTL_COUNT_DESC);
+ ew32(TXDCTL(1), reg_data);
+ break;
+ }
+
+ /* Clear all of the statistics registers (clear on read). It is
+ * important that we do this after we have tried to establish link
+ * because the symbol error count will increment wildly if there
+ * is no link.
+ */
+ e1000_clear_hw_cntrs_82571(hw);
+
+ return ret_val;
+}
+
+/**
+ * e1000_initialize_hw_bits_82571 - Initialize hardware-dependent bits
+ * @hw: pointer to the HW structure
+ *
+ * Initializes required hardware-dependent bits needed for normal operation.
+ **/
+static void e1000_initialize_hw_bits_82571(struct e1000_hw *hw)
+{
+ u32 reg;
+
+ /* Transmit Descriptor Control 0 */
+ reg = er32(TXDCTL(0));
+ reg |= BIT(22);
+ ew32(TXDCTL(0), reg);
+
+ /* Transmit Descriptor Control 1 */
+ reg = er32(TXDCTL(1));
+ reg |= BIT(22);
+ ew32(TXDCTL(1), reg);
+
+ /* Transmit Arbitration Control 0 */
+ reg = er32(TARC(0));
+ reg &= ~(0xF << 27); /* 30:27 */
+ switch (hw->mac.type) {
+ case e1000_82571:
+ case e1000_82572:
+ reg |= BIT(23) | BIT(24) | BIT(25) | BIT(26);
+ break;
+ case e1000_82574:
+ case e1000_82583:
+ reg |= BIT(26);
+ break;
+ default:
+ break;
+ }
+ ew32(TARC(0), reg);
+
+ /* Transmit Arbitration Control 1 */
+ reg = er32(TARC(1));
+ switch (hw->mac.type) {
+ case e1000_82571:
+ case e1000_82572:
+ reg &= ~(BIT(29) | BIT(30));
+ reg |= BIT(22) | BIT(24) | BIT(25) | BIT(26);
+ if (er32(TCTL) & E1000_TCTL_MULR)
+ reg &= ~BIT(28);
+ else
+ reg |= BIT(28);
+ ew32(TARC(1), reg);
+ break;
+ default:
+ break;
+ }
+
+ /* Device Control */
+ switch (hw->mac.type) {
+ case e1000_82573:
+ case e1000_82574:
+ case e1000_82583:
+ reg = er32(CTRL);
+ reg &= ~BIT(29);
+ ew32(CTRL, reg);
+ break;
+ default:
+ break;
+ }
+
+ /* Extended Device Control */
+ switch (hw->mac.type) {
+ case e1000_82573:
+ case e1000_82574:
+ case e1000_82583:
+ reg = er32(CTRL_EXT);
+ reg &= ~BIT(23);
+ reg |= BIT(22);
+ ew32(CTRL_EXT, reg);
+ break;
+ default:
+ break;
+ }
+
+ if (hw->mac.type == e1000_82571) {
+ reg = er32(PBA_ECC);
+ reg |= E1000_PBA_ECC_CORR_EN;
+ ew32(PBA_ECC, reg);
+ }
+
+ /* Workaround for hardware errata.
+ * Ensure that DMA Dynamic Clock gating is disabled on 82571 and 82572
+ */
+ if ((hw->mac.type == e1000_82571) || (hw->mac.type == e1000_82572)) {
+ reg = er32(CTRL_EXT);
+ reg &= ~E1000_CTRL_EXT_DMA_DYN_CLK_EN;
+ ew32(CTRL_EXT, reg);
+ }
+
+ /* Disable IPv6 extension header parsing because some malformed
+ * IPv6 headers can hang the Rx.
+ */
+ if (hw->mac.type <= e1000_82573) {
+ reg = er32(RFCTL);
+ reg |= (E1000_RFCTL_IPV6_EX_DIS | E1000_RFCTL_NEW_IPV6_EXT_DIS);
+ ew32(RFCTL, reg);
+ }
+
+ /* PCI-Ex Control Registers */
+ switch (hw->mac.type) {
+ case e1000_82574:
+ case e1000_82583:
+ reg = er32(GCR);
+ reg |= BIT(22);
+ ew32(GCR, reg);
+
+ /* Workaround for hardware errata.
+ * apply workaround for hardware errata documented in errata
+ * docs Fixes issue where some error prone or unreliable PCIe
+ * completions are occurring, particularly with ASPM enabled.
+ * Without fix, issue can cause Tx timeouts.
+ */
+ reg = er32(GCR2);
+ reg |= 1;
+ ew32(GCR2, reg);
+ break;
+ default:
+ break;
+ }
+}
+
+/**
+ * e1000_clear_vfta_82571 - Clear VLAN filter table
+ * @hw: pointer to the HW structure
+ *
+ * Clears the register array which contains the VLAN filter table by
+ * setting all the values to 0.
+ **/
+static void e1000_clear_vfta_82571(struct e1000_hw *hw)
+{
+ u32 offset;
+ u32 vfta_value = 0;
+ u32 vfta_offset = 0;
+ u32 vfta_bit_in_reg = 0;
+
+ switch (hw->mac.type) {
+ case e1000_82573:
+ case e1000_82574:
+ case e1000_82583:
+ if (hw->mng_cookie.vlan_id != 0) {
+ /* The VFTA is a 4096b bit-field, each identifying
+ * a single VLAN ID. The following operations
+ * determine which 32b entry (i.e. offset) into the
+ * array we want to set the VLAN ID (i.e. bit) of
+ * the manageability unit.
+ */
+ vfta_offset = (hw->mng_cookie.vlan_id >>
+ E1000_VFTA_ENTRY_SHIFT) &
+ E1000_VFTA_ENTRY_MASK;
+ vfta_bit_in_reg =
+ BIT(hw->mng_cookie.vlan_id &
+ E1000_VFTA_ENTRY_BIT_SHIFT_MASK);
+ }
+ break;
+ default:
+ break;
+ }
+ for (offset = 0; offset < E1000_VLAN_FILTER_TBL_SIZE; offset++) {
+ /* If the offset we want to clear is the same offset of the
+ * manageability VLAN ID, then clear all bits except that of
+ * the manageability unit.
+ */
+ vfta_value = (offset == vfta_offset) ? vfta_bit_in_reg : 0;
+ E1000_WRITE_REG_ARRAY(hw, E1000_VFTA, offset, vfta_value);
+ e1e_flush();
+ }
+}
+
+/**
+ * e1000_check_mng_mode_82574 - Check manageability is enabled
+ * @hw: pointer to the HW structure
+ *
+ * Reads the NVM Initialization Control Word 2 and returns true
+ * (>0) if any manageability is enabled, else false (0).
+ **/
+static bool e1000_check_mng_mode_82574(struct e1000_hw *hw)
+{
+ u16 data;
+
+ e1000_read_nvm(hw, NVM_INIT_CONTROL2_REG, 1, &data);
+ return (data & E1000_NVM_INIT_CTRL2_MNGM) != 0;
+}
+
+/**
+ * e1000_led_on_82574 - Turn LED on
+ * @hw: pointer to the HW structure
+ *
+ * Turn LED on.
+ **/
+static s32 e1000_led_on_82574(struct e1000_hw *hw)
+{
+ u32 ctrl;
+ u32 i;
+
+ ctrl = hw->mac.ledctl_mode2;
+ if (!(E1000_STATUS_LU & er32(STATUS))) {
+ /* If no link, then turn LED on by setting the invert bit
+ * for each LED that's "on" (0x0E) in ledctl_mode2.
+ */
+ for (i = 0; i < 4; i++)
+ if (((hw->mac.ledctl_mode2 >> (i * 8)) & 0xFF) ==
+ E1000_LEDCTL_MODE_LED_ON)
+ ctrl |= (E1000_LEDCTL_LED0_IVRT << (i * 8));
+ }
+ ew32(LEDCTL, ctrl);
+
+ return 0;
+}
+
+/**
+ * e1000_check_phy_82574 - check 82574 phy hung state
+ * @hw: pointer to the HW structure
+ *
+ * Returns whether phy is hung or not
+ **/
+bool e1000_check_phy_82574(struct e1000_hw *hw)
+{
+ u16 status_1kbt = 0;
+ u16 receive_errors = 0;
+ s32 ret_val;
+
+ /* Read PHY Receive Error counter first, if its is max - all F's then
+ * read the Base1000T status register If both are max then PHY is hung.
+ */
+ ret_val = e1e_rphy(hw, E1000_RECEIVE_ERROR_COUNTER, &receive_errors);
+ if (ret_val)
+ return false;
+ if (receive_errors == E1000_RECEIVE_ERROR_MAX) {
+ ret_val = e1e_rphy(hw, E1000_BASE1000T_STATUS, &status_1kbt);
+ if (ret_val)
+ return false;
+ if ((status_1kbt & E1000_IDLE_ERROR_COUNT_MASK) ==
+ E1000_IDLE_ERROR_COUNT_MASK)
+ return true;
+ }
+
+ return false;
+}
+
+/**
+ * e1000_setup_link_82571 - Setup flow control and link settings
+ * @hw: pointer to the HW structure
+ *
+ * Determines which flow control settings to use, then configures flow
+ * control. Calls the appropriate media-specific link configuration
+ * function. Assuming the adapter has a valid link partner, a valid link
+ * should be established. Assumes the hardware has previously been reset
+ * and the transmitter and receiver are not enabled.
+ **/
+static s32 e1000_setup_link_82571(struct e1000_hw *hw)
+{
+ /* 82573 does not have a word in the NVM to determine
+ * the default flow control setting, so we explicitly
+ * set it to full.
+ */
+ switch (hw->mac.type) {
+ case e1000_82573:
+ case e1000_82574:
+ case e1000_82583:
+ if (hw->fc.requested_mode == e1000_fc_default)
+ hw->fc.requested_mode = e1000_fc_full;
+ break;
+ default:
+ break;
+ }
+
+ return e1000e_setup_link_generic(hw);
+}
+
+/**
+ * e1000_setup_copper_link_82571 - Configure copper link settings
+ * @hw: pointer to the HW structure
+ *
+ * Configures the link for auto-neg or forced speed and duplex. Then we check
+ * for link, once link is established calls to configure collision distance
+ * and flow control are called.
+ **/
+static s32 e1000_setup_copper_link_82571(struct e1000_hw *hw)
+{
+ u32 ctrl;
+ s32 ret_val;
+
+ ctrl = er32(CTRL);
+ ctrl |= E1000_CTRL_SLU;
+ ctrl &= ~(E1000_CTRL_FRCSPD | E1000_CTRL_FRCDPX);
+ ew32(CTRL, ctrl);
+
+ switch (hw->phy.type) {
+ case e1000_phy_m88:
+ case e1000_phy_bm:
+ ret_val = e1000e_copper_link_setup_m88(hw);
+ break;
+ case e1000_phy_igp_2:
+ ret_val = e1000e_copper_link_setup_igp(hw);
+ break;
+ default:
+ return -E1000_ERR_PHY;
+ }
+
+ if (ret_val)
+ return ret_val;
+
+ return e1000e_setup_copper_link(hw);
+}
+
+/**
+ * e1000_setup_fiber_serdes_link_82571 - Setup link for fiber/serdes
+ * @hw: pointer to the HW structure
+ *
+ * Configures collision distance and flow control for fiber and serdes links.
+ * Upon successful setup, poll for link.
+ **/
+static s32 e1000_setup_fiber_serdes_link_82571(struct e1000_hw *hw)
+{
+ switch (hw->mac.type) {
+ case e1000_82571:
+ case e1000_82572:
+ /* If SerDes loopback mode is entered, there is no form
+ * of reset to take the adapter out of that mode. So we
+ * have to explicitly take the adapter out of loopback
+ * mode. This prevents drivers from twiddling their thumbs
+ * if another tool failed to take it out of loopback mode.
+ */
+ ew32(SCTL, E1000_SCTL_DISABLE_SERDES_LOOPBACK);
+ break;
+ default:
+ break;
+ }
+
+ return e1000e_setup_fiber_serdes_link(hw);
+}
+
+/**
+ * e1000_check_for_serdes_link_82571 - Check for link (Serdes)
+ * @hw: pointer to the HW structure
+ *
+ * Reports the link state as up or down.
+ *
+ * If autonegotiation is supported by the link partner, the link state is
+ * determined by the result of autonegotiation. This is the most likely case.
+ * If autonegotiation is not supported by the link partner, and the link
+ * has a valid signal, force the link up.
+ *
+ * The link state is represented internally here by 4 states:
+ *
+ * 1) down
+ * 2) autoneg_progress
+ * 3) autoneg_complete (the link successfully autonegotiated)
+ * 4) forced_up (the link has been forced up, it did not autonegotiate)
+ *
+ **/
+static s32 e1000_check_for_serdes_link_82571(struct e1000_hw *hw)
+{
+ struct e1000_mac_info *mac = &hw->mac;
+ u32 rxcw;
+ u32 ctrl;
+ u32 status;
+ u32 txcw;
+ u32 i;
+ s32 ret_val = 0;
+
+ ctrl = er32(CTRL);
+ status = er32(STATUS);
+ er32(RXCW);
+ /* SYNCH bit and IV bit are sticky */
+ usleep_range(10, 20);
+ rxcw = er32(RXCW);
+
+ if ((rxcw & E1000_RXCW_SYNCH) && !(rxcw & E1000_RXCW_IV)) {
+ /* Receiver is synchronized with no invalid bits. */
+ switch (mac->serdes_link_state) {
+ case e1000_serdes_link_autoneg_complete:
+ if (!(status & E1000_STATUS_LU)) {
+ /* We have lost link, retry autoneg before
+ * reporting link failure
+ */
+ mac->serdes_link_state =
+ e1000_serdes_link_autoneg_progress;
+ mac->serdes_has_link = false;
+ e_dbg("AN_UP -> AN_PROG\n");
+ } else {
+ mac->serdes_has_link = true;
+ }
+ break;
+
+ case e1000_serdes_link_forced_up:
+ /* If we are receiving /C/ ordered sets, re-enable
+ * auto-negotiation in the TXCW register and disable
+ * forced link in the Device Control register in an
+ * attempt to auto-negotiate with our link partner.
+ */
+ if (rxcw & E1000_RXCW_C) {
+ /* Enable autoneg, and unforce link up */
+ ew32(TXCW, mac->txcw);
+ ew32(CTRL, (ctrl & ~E1000_CTRL_SLU));
+ mac->serdes_link_state =
+ e1000_serdes_link_autoneg_progress;
+ mac->serdes_has_link = false;
+ e_dbg("FORCED_UP -> AN_PROG\n");
+ } else {
+ mac->serdes_has_link = true;
+ }
+ break;
+
+ case e1000_serdes_link_autoneg_progress:
+ if (rxcw & E1000_RXCW_C) {
+ /* We received /C/ ordered sets, meaning the
+ * link partner has autonegotiated, and we can
+ * trust the Link Up (LU) status bit.
+ */
+ if (status & E1000_STATUS_LU) {
+ mac->serdes_link_state =
+ e1000_serdes_link_autoneg_complete;
+ e_dbg("AN_PROG -> AN_UP\n");
+ mac->serdes_has_link = true;
+ } else {
+ /* Autoneg completed, but failed. */
+ mac->serdes_link_state =
+ e1000_serdes_link_down;
+ e_dbg("AN_PROG -> DOWN\n");
+ }
+ } else {
+ /* The link partner did not autoneg.
+ * Force link up and full duplex, and change
+ * state to forced.
+ */
+ ew32(TXCW, (mac->txcw & ~E1000_TXCW_ANE));
+ ctrl |= (E1000_CTRL_SLU | E1000_CTRL_FD);
+ ew32(CTRL, ctrl);
+
+ /* Configure Flow Control after link up. */
+ ret_val = e1000e_config_fc_after_link_up(hw);
+ if (ret_val) {
+ e_dbg("Error config flow control\n");
+ break;
+ }
+ mac->serdes_link_state =
+ e1000_serdes_link_forced_up;
+ mac->serdes_has_link = true;
+ e_dbg("AN_PROG -> FORCED_UP\n");
+ }
+ break;
+
+ case e1000_serdes_link_down:
+ default:
+ /* The link was down but the receiver has now gained
+ * valid sync, so lets see if we can bring the link
+ * up.
+ */
+ ew32(TXCW, mac->txcw);
+ ew32(CTRL, (ctrl & ~E1000_CTRL_SLU));
+ mac->serdes_link_state =
+ e1000_serdes_link_autoneg_progress;
+ mac->serdes_has_link = false;
+ e_dbg("DOWN -> AN_PROG\n");
+ break;
+ }
+ } else {
+ if (!(rxcw & E1000_RXCW_SYNCH)) {
+ mac->serdes_has_link = false;
+ mac->serdes_link_state = e1000_serdes_link_down;
+ e_dbg("ANYSTATE -> DOWN\n");
+ } else {
+ /* Check several times, if SYNCH bit and CONFIG
+ * bit both are consistently 1 then simply ignore
+ * the IV bit and restart Autoneg
+ */
+ for (i = 0; i < AN_RETRY_COUNT; i++) {
+ usleep_range(10, 20);
+ rxcw = er32(RXCW);
+ if ((rxcw & E1000_RXCW_SYNCH) &&
+ (rxcw & E1000_RXCW_C))
+ continue;
+
+ if (rxcw & E1000_RXCW_IV) {
+ mac->serdes_has_link = false;
+ mac->serdes_link_state =
+ e1000_serdes_link_down;
+ e_dbg("ANYSTATE -> DOWN\n");
+ break;
+ }
+ }
+
+ if (i == AN_RETRY_COUNT) {
+ txcw = er32(TXCW);
+ txcw |= E1000_TXCW_ANE;
+ ew32(TXCW, txcw);
+ mac->serdes_link_state =
+ e1000_serdes_link_autoneg_progress;
+ mac->serdes_has_link = false;
+ e_dbg("ANYSTATE -> AN_PROG\n");
+ }
+ }
+ }
+
+ return ret_val;
+}
+
+/**
+ * e1000_valid_led_default_82571 - Verify a valid default LED config
+ * @hw: pointer to the HW structure
+ * @data: pointer to the NVM (EEPROM)
+ *
+ * Read the EEPROM for the current default LED configuration. If the
+ * LED configuration is not valid, set to a valid LED configuration.
+ **/
+static s32 e1000_valid_led_default_82571(struct e1000_hw *hw, u16 *data)
+{
+ s32 ret_val;
+
+ ret_val = e1000_read_nvm(hw, NVM_ID_LED_SETTINGS, 1, data);
+ if (ret_val) {
+ e_dbg("NVM Read Error\n");
+ return ret_val;
+ }
+
+ switch (hw->mac.type) {
+ case e1000_82573:
+ case e1000_82574:
+ case e1000_82583:
+ if (*data == ID_LED_RESERVED_F746)
+ *data = ID_LED_DEFAULT_82573;
+ break;
+ default:
+ if (*data == ID_LED_RESERVED_0000 ||
+ *data == ID_LED_RESERVED_FFFF)
+ *data = ID_LED_DEFAULT;
+ break;
+ }
+
+ return 0;
+}
+
+/**
+ * e1000e_get_laa_state_82571 - Get locally administered address state
+ * @hw: pointer to the HW structure
+ *
+ * Retrieve and return the current locally administered address state.
+ **/
+bool e1000e_get_laa_state_82571(struct e1000_hw *hw)
+{
+ if (hw->mac.type != e1000_82571)
+ return false;
+
+ return hw->dev_spec.e82571.laa_is_present;
+}
+
+/**
+ * e1000e_set_laa_state_82571 - Set locally administered address state
+ * @hw: pointer to the HW structure
+ * @state: enable/disable locally administered address
+ *
+ * Enable/Disable the current locally administered address state.
+ **/
+void e1000e_set_laa_state_82571(struct e1000_hw *hw, bool state)
+{
+ if (hw->mac.type != e1000_82571)
+ return;
+
+ hw->dev_spec.e82571.laa_is_present = state;
+
+ /* If workaround is activated... */
+ if (state)
+ /* Hold a copy of the LAA in RAR[14] This is done so that
+ * between the time RAR[0] gets clobbered and the time it
+ * gets fixed, the actual LAA is in one of the RARs and no
+ * incoming packets directed to this port are dropped.
+ * Eventually the LAA will be in RAR[0] and RAR[14].
+ */
+ hw->mac.ops.rar_set(hw, hw->mac.addr,
+ hw->mac.rar_entry_count - 1);
+}
+
+/**
+ * e1000_fix_nvm_checksum_82571 - Fix EEPROM checksum
+ * @hw: pointer to the HW structure
+ *
+ * Verifies that the EEPROM has completed the update. After updating the
+ * EEPROM, we need to check bit 15 in work 0x23 for the checksum fix. If
+ * the checksum fix is not implemented, we need to set the bit and update
+ * the checksum. Otherwise, if bit 15 is set and the checksum is incorrect,
+ * we need to return bad checksum.
+ **/
+static s32 e1000_fix_nvm_checksum_82571(struct e1000_hw *hw)
+{
+ struct e1000_nvm_info *nvm = &hw->nvm;
+ s32 ret_val;
+ u16 data;
+
+ if (nvm->type != e1000_nvm_flash_hw)
+ return 0;
+
+ /* Check bit 4 of word 10h. If it is 0, firmware is done updating
+ * 10h-12h. Checksum may need to be fixed.
+ */
+ ret_val = e1000_read_nvm(hw, 0x10, 1, &data);
+ if (ret_val)
+ return ret_val;
+
+ if (!(data & 0x10)) {
+ /* Read 0x23 and check bit 15. This bit is a 1
+ * when the checksum has already been fixed. If
+ * the checksum is still wrong and this bit is a
+ * 1, we need to return bad checksum. Otherwise,
+ * we need to set this bit to a 1 and update the
+ * checksum.
+ */
+ ret_val = e1000_read_nvm(hw, 0x23, 1, &data);
+ if (ret_val)
+ return ret_val;
+
+ if (!(data & 0x8000)) {
+ data |= 0x8000;
+ ret_val = e1000_write_nvm(hw, 0x23, 1, &data);
+ if (ret_val)
+ return ret_val;
+ ret_val = e1000e_update_nvm_checksum(hw);
+ if (ret_val)
+ return ret_val;
+ }
+ }
+
+ return 0;
+}
+
+/**
+ * e1000_read_mac_addr_82571 - Read device MAC address
+ * @hw: pointer to the HW structure
+ **/
+static s32 e1000_read_mac_addr_82571(struct e1000_hw *hw)
+{
+ if (hw->mac.type == e1000_82571) {
+ s32 ret_val;
+
+ /* If there's an alternate MAC address place it in RAR0
+ * so that it will override the Si installed default perm
+ * address.
+ */
+ ret_val = e1000_check_alt_mac_addr_generic(hw);
+ if (ret_val)
+ return ret_val;
+ }
+
+ return e1000_read_mac_addr_generic(hw);
+}
+
+/**
+ * e1000_power_down_phy_copper_82571 - Remove link during PHY power down
+ * @hw: pointer to the HW structure
+ *
+ * In the case of a PHY power down to save power, or to turn off link during a
+ * driver unload, or wake on lan is not enabled, remove the link.
+ **/
+static void e1000_power_down_phy_copper_82571(struct e1000_hw *hw)
+{
+ struct e1000_phy_info *phy = &hw->phy;
+ struct e1000_mac_info *mac = &hw->mac;
+
+ if (!phy->ops.check_reset_block)
+ return;
+
+ /* If the management interface is not enabled, then power down */
+ if (!(mac->ops.check_mng_mode(hw) || phy->ops.check_reset_block(hw)))
+ e1000_power_down_phy_copper(hw);
+}
+
+/**
+ * e1000_clear_hw_cntrs_82571 - Clear device specific hardware counters
+ * @hw: pointer to the HW structure
+ *
+ * Clears the hardware counters by reading the counter registers.
+ **/
+static void e1000_clear_hw_cntrs_82571(struct e1000_hw *hw)
+{
+ e1000e_clear_hw_cntrs_base(hw);
+
+ er32(PRC64);
+ er32(PRC127);
+ er32(PRC255);
+ er32(PRC511);
+ er32(PRC1023);
+ er32(PRC1522);
+ er32(PTC64);
+ er32(PTC127);
+ er32(PTC255);
+ er32(PTC511);
+ er32(PTC1023);
+ er32(PTC1522);
+
+ er32(ALGNERRC);
+ er32(RXERRC);
+ er32(TNCRS);
+ er32(CEXTERR);
+ er32(TSCTC);
+ er32(TSCTFC);
+
+ er32(MGTPRC);
+ er32(MGTPDC);
+ er32(MGTPTC);
+
+ er32(IAC);
+ er32(ICRXOC);
+
+ er32(ICRXPTC);
+ er32(ICRXATC);
+ er32(ICTXPTC);
+ er32(ICTXATC);
+ er32(ICTXQEC);
+ er32(ICTXQMTC);
+ er32(ICRXDMTC);
+}
+
+static const struct e1000_mac_operations e82571_mac_ops = {
+ /* .check_mng_mode: mac type dependent */
+ /* .check_for_link: media type dependent */
+ .id_led_init = e1000e_id_led_init_generic,
+ .cleanup_led = e1000e_cleanup_led_generic,
+ .clear_hw_cntrs = e1000_clear_hw_cntrs_82571,
+ .get_bus_info = e1000e_get_bus_info_pcie,
+ .set_lan_id = e1000_set_lan_id_multi_port_pcie,
+ /* .get_link_up_info: media type dependent */
+ /* .led_on: mac type dependent */
+ .led_off = e1000e_led_off_generic,
+ .update_mc_addr_list = e1000e_update_mc_addr_list_generic,
+ .write_vfta = e1000_write_vfta_generic,
+ .clear_vfta = e1000_clear_vfta_82571,
+ .reset_hw = e1000_reset_hw_82571,
+ .init_hw = e1000_init_hw_82571,
+ .setup_link = e1000_setup_link_82571,
+ /* .setup_physical_interface: media type dependent */
+ .setup_led = e1000e_setup_led_generic,
+ .config_collision_dist = e1000e_config_collision_dist_generic,
+ .read_mac_addr = e1000_read_mac_addr_82571,
+ .rar_set = e1000e_rar_set_generic,
+ .rar_get_count = e1000e_rar_get_count_generic,
+};
+
+static const struct e1000_phy_operations e82_phy_ops_igp = {
+ .acquire = e1000_get_hw_semaphore_82571,
+ .check_polarity = e1000_check_polarity_igp,
+ .check_reset_block = e1000e_check_reset_block_generic,
+ .commit = NULL,
+ .force_speed_duplex = e1000e_phy_force_speed_duplex_igp,
+ .get_cfg_done = e1000_get_cfg_done_82571,
+ .get_cable_length = e1000e_get_cable_length_igp_2,
+ .get_info = e1000e_get_phy_info_igp,
+ .read_reg = e1000e_read_phy_reg_igp,
+ .release = e1000_put_hw_semaphore_82571,
+ .reset = e1000e_phy_hw_reset_generic,
+ .set_d0_lplu_state = e1000_set_d0_lplu_state_82571,
+ .set_d3_lplu_state = e1000e_set_d3_lplu_state,
+ .write_reg = e1000e_write_phy_reg_igp,
+ .cfg_on_link_up = NULL,
+};
+
+static const struct e1000_phy_operations e82_phy_ops_m88 = {
+ .acquire = e1000_get_hw_semaphore_82571,
+ .check_polarity = e1000_check_polarity_m88,
+ .check_reset_block = e1000e_check_reset_block_generic,
+ .commit = e1000e_phy_sw_reset,
+ .force_speed_duplex = e1000e_phy_force_speed_duplex_m88,
+ .get_cfg_done = e1000e_get_cfg_done_generic,
+ .get_cable_length = e1000e_get_cable_length_m88,
+ .get_info = e1000e_get_phy_info_m88,
+ .read_reg = e1000e_read_phy_reg_m88,
+ .release = e1000_put_hw_semaphore_82571,
+ .reset = e1000e_phy_hw_reset_generic,
+ .set_d0_lplu_state = e1000_set_d0_lplu_state_82571,
+ .set_d3_lplu_state = e1000e_set_d3_lplu_state,
+ .write_reg = e1000e_write_phy_reg_m88,
+ .cfg_on_link_up = NULL,
+};
+
+static const struct e1000_phy_operations e82_phy_ops_bm = {
+ .acquire = e1000_get_hw_semaphore_82571,
+ .check_polarity = e1000_check_polarity_m88,
+ .check_reset_block = e1000e_check_reset_block_generic,
+ .commit = e1000e_phy_sw_reset,
+ .force_speed_duplex = e1000e_phy_force_speed_duplex_m88,
+ .get_cfg_done = e1000e_get_cfg_done_generic,
+ .get_cable_length = e1000e_get_cable_length_m88,
+ .get_info = e1000e_get_phy_info_m88,
+ .read_reg = e1000e_read_phy_reg_bm2,
+ .release = e1000_put_hw_semaphore_82571,
+ .reset = e1000e_phy_hw_reset_generic,
+ .set_d0_lplu_state = e1000_set_d0_lplu_state_82571,
+ .set_d3_lplu_state = e1000e_set_d3_lplu_state,
+ .write_reg = e1000e_write_phy_reg_bm2,
+ .cfg_on_link_up = NULL,
+};
+
+static const struct e1000_nvm_operations e82571_nvm_ops = {
+ .acquire = e1000_acquire_nvm_82571,
+ .read = e1000e_read_nvm_eerd,
+ .release = e1000_release_nvm_82571,
+ .reload = e1000e_reload_nvm_generic,
+ .update = e1000_update_nvm_checksum_82571,
+ .valid_led_default = e1000_valid_led_default_82571,
+ .validate = e1000_validate_nvm_checksum_82571,
+ .write = e1000_write_nvm_82571,
+};
+
+const struct e1000_info e1000_82571_info = {
+ .mac = e1000_82571,
+ .flags = FLAG_HAS_HW_VLAN_FILTER
+ | FLAG_HAS_JUMBO_FRAMES
+ | FLAG_HAS_WOL
+ | FLAG_APME_IN_CTRL3
+ | FLAG_HAS_CTRLEXT_ON_LOAD
+ | FLAG_HAS_SMART_POWER_DOWN
+ | FLAG_RESET_OVERWRITES_LAA /* errata */
+ | FLAG_TARC_SPEED_MODE_BIT /* errata */
+ | FLAG_APME_CHECK_PORT_B,
+ .flags2 = FLAG2_DISABLE_ASPM_L1 /* errata 13 */
+ | FLAG2_DMA_BURST,
+ .pba = 38,
+ .max_hw_frame_size = DEFAULT_JUMBO,
+ .get_variants = e1000_get_variants_82571,
+ .mac_ops = &e82571_mac_ops,
+ .phy_ops = &e82_phy_ops_igp,
+ .nvm_ops = &e82571_nvm_ops,
+};
+
+const struct e1000_info e1000_82572_info = {
+ .mac = e1000_82572,
+ .flags = FLAG_HAS_HW_VLAN_FILTER
+ | FLAG_HAS_JUMBO_FRAMES
+ | FLAG_HAS_WOL
+ | FLAG_APME_IN_CTRL3
+ | FLAG_HAS_CTRLEXT_ON_LOAD
+ | FLAG_TARC_SPEED_MODE_BIT, /* errata */
+ .flags2 = FLAG2_DISABLE_ASPM_L1 /* errata 13 */
+ | FLAG2_DMA_BURST,
+ .pba = 38,
+ .max_hw_frame_size = DEFAULT_JUMBO,
+ .get_variants = e1000_get_variants_82571,
+ .mac_ops = &e82571_mac_ops,
+ .phy_ops = &e82_phy_ops_igp,
+ .nvm_ops = &e82571_nvm_ops,
+};
+
+const struct e1000_info e1000_82573_info = {
+ .mac = e1000_82573,
+ .flags = FLAG_HAS_HW_VLAN_FILTER
+ | FLAG_HAS_WOL
+ | FLAG_APME_IN_CTRL3
+ | FLAG_HAS_SMART_POWER_DOWN
+ | FLAG_HAS_AMT
+ | FLAG_HAS_SWSM_ON_LOAD,
+ .flags2 = FLAG2_DISABLE_ASPM_L1
+ | FLAG2_DISABLE_ASPM_L0S,
+ .pba = 20,
+ .max_hw_frame_size = VLAN_ETH_FRAME_LEN + ETH_FCS_LEN,
+ .get_variants = e1000_get_variants_82571,
+ .mac_ops = &e82571_mac_ops,
+ .phy_ops = &e82_phy_ops_m88,
+ .nvm_ops = &e82571_nvm_ops,
+};
+
+const struct e1000_info e1000_82574_info = {
+ .mac = e1000_82574,
+ .flags = FLAG_HAS_HW_VLAN_FILTER
+ | FLAG_HAS_MSIX
+ | FLAG_HAS_JUMBO_FRAMES
+ | FLAG_HAS_WOL
+ | FLAG_HAS_HW_TIMESTAMP
+ | FLAG_APME_IN_CTRL3
+ | FLAG_HAS_SMART_POWER_DOWN
+ | FLAG_HAS_AMT
+ | FLAG_HAS_CTRLEXT_ON_LOAD,
+ .flags2 = FLAG2_CHECK_PHY_HANG
+ | FLAG2_DISABLE_ASPM_L0S
+ | FLAG2_DISABLE_ASPM_L1
+ | FLAG2_NO_DISABLE_RX
+ | FLAG2_DMA_BURST
+ | FLAG2_CHECK_SYSTIM_OVERFLOW,
+ .pba = 32,
+ .max_hw_frame_size = DEFAULT_JUMBO,
+ .get_variants = e1000_get_variants_82571,
+ .mac_ops = &e82571_mac_ops,
+ .phy_ops = &e82_phy_ops_bm,
+ .nvm_ops = &e82571_nvm_ops,
+};
+
+const struct e1000_info e1000_82583_info = {
+ .mac = e1000_82583,
+ .flags = FLAG_HAS_HW_VLAN_FILTER
+ | FLAG_HAS_WOL
+ | FLAG_HAS_HW_TIMESTAMP
+ | FLAG_APME_IN_CTRL3
+ | FLAG_HAS_SMART_POWER_DOWN
+ | FLAG_HAS_AMT
+ | FLAG_HAS_JUMBO_FRAMES
+ | FLAG_HAS_CTRLEXT_ON_LOAD,
+ .flags2 = FLAG2_DISABLE_ASPM_L0S
+ | FLAG2_DISABLE_ASPM_L1
+ | FLAG2_NO_DISABLE_RX
+ | FLAG2_CHECK_SYSTIM_OVERFLOW,
+ .pba = 32,
+ .max_hw_frame_size = DEFAULT_JUMBO,
+ .get_variants = e1000_get_variants_82571,
+ .mac_ops = &e82571_mac_ops,
+ .phy_ops = &e82_phy_ops_bm,
+ .nvm_ops = &e82571_nvm_ops,
+};