summaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/intel/fm10k/fm10k_pf.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/ethernet/intel/fm10k/fm10k_pf.c')
-rw-r--r--drivers/net/ethernet/intel/fm10k/fm10k_pf.c1825
1 files changed, 1825 insertions, 0 deletions
diff --git a/drivers/net/ethernet/intel/fm10k/fm10k_pf.c b/drivers/net/ethernet/intel/fm10k/fm10k_pf.c
new file mode 100644
index 000000000..af1b0cde3
--- /dev/null
+++ b/drivers/net/ethernet/intel/fm10k/fm10k_pf.c
@@ -0,0 +1,1825 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright(c) 2013 - 2019 Intel Corporation. */
+
+#include "fm10k_pf.h"
+#include "fm10k_vf.h"
+
+/**
+ * fm10k_reset_hw_pf - PF hardware reset
+ * @hw: pointer to hardware structure
+ *
+ * This function should return the hardware to a state similar to the
+ * one it is in after being powered on.
+ **/
+static s32 fm10k_reset_hw_pf(struct fm10k_hw *hw)
+{
+ s32 err;
+ u32 reg;
+ u16 i;
+
+ /* Disable interrupts */
+ fm10k_write_reg(hw, FM10K_EIMR, FM10K_EIMR_DISABLE(ALL));
+
+ /* Lock ITR2 reg 0 into itself and disable interrupt moderation */
+ fm10k_write_reg(hw, FM10K_ITR2(0), 0);
+ fm10k_write_reg(hw, FM10K_INT_CTRL, 0);
+
+ /* We assume here Tx and Rx queue 0 are owned by the PF */
+
+ /* Shut off VF access to their queues forcing them to queue 0 */
+ for (i = 0; i < FM10K_TQMAP_TABLE_SIZE; i++) {
+ fm10k_write_reg(hw, FM10K_TQMAP(i), 0);
+ fm10k_write_reg(hw, FM10K_RQMAP(i), 0);
+ }
+
+ /* shut down all rings */
+ err = fm10k_disable_queues_generic(hw, FM10K_MAX_QUEUES);
+ if (err == FM10K_ERR_REQUESTS_PENDING) {
+ hw->mac.reset_while_pending++;
+ goto force_reset;
+ } else if (err) {
+ return err;
+ }
+
+ /* Verify that DMA is no longer active */
+ reg = fm10k_read_reg(hw, FM10K_DMA_CTRL);
+ if (reg & (FM10K_DMA_CTRL_TX_ACTIVE | FM10K_DMA_CTRL_RX_ACTIVE))
+ return FM10K_ERR_DMA_PENDING;
+
+force_reset:
+ /* Inititate data path reset */
+ reg = FM10K_DMA_CTRL_DATAPATH_RESET;
+ fm10k_write_reg(hw, FM10K_DMA_CTRL, reg);
+
+ /* Flush write and allow 100us for reset to complete */
+ fm10k_write_flush(hw);
+ udelay(FM10K_RESET_TIMEOUT);
+
+ /* Verify we made it out of reset */
+ reg = fm10k_read_reg(hw, FM10K_IP);
+ if (!(reg & FM10K_IP_NOTINRESET))
+ return FM10K_ERR_RESET_FAILED;
+
+ return 0;
+}
+
+/**
+ * fm10k_is_ari_hierarchy_pf - Indicate ARI hierarchy support
+ * @hw: pointer to hardware structure
+ *
+ * Looks at the ARI hierarchy bit to determine whether ARI is supported or not.
+ **/
+static bool fm10k_is_ari_hierarchy_pf(struct fm10k_hw *hw)
+{
+ u16 sriov_ctrl = fm10k_read_pci_cfg_word(hw, FM10K_PCIE_SRIOV_CTRL);
+
+ return !!(sriov_ctrl & FM10K_PCIE_SRIOV_CTRL_VFARI);
+}
+
+/**
+ * fm10k_init_hw_pf - PF hardware initialization
+ * @hw: pointer to hardware structure
+ *
+ **/
+static s32 fm10k_init_hw_pf(struct fm10k_hw *hw)
+{
+ u32 dma_ctrl, txqctl;
+ u16 i;
+
+ /* Establish default VSI as valid */
+ fm10k_write_reg(hw, FM10K_DGLORTDEC(fm10k_dglort_default), 0);
+ fm10k_write_reg(hw, FM10K_DGLORTMAP(fm10k_dglort_default),
+ FM10K_DGLORTMAP_ANY);
+
+ /* Invalidate all other GLORT entries */
+ for (i = 1; i < FM10K_DGLORT_COUNT; i++)
+ fm10k_write_reg(hw, FM10K_DGLORTMAP(i), FM10K_DGLORTMAP_NONE);
+
+ /* reset ITR2(0) to point to itself */
+ fm10k_write_reg(hw, FM10K_ITR2(0), 0);
+
+ /* reset VF ITR2(0) to point to 0 avoid PF registers */
+ fm10k_write_reg(hw, FM10K_ITR2(FM10K_ITR_REG_COUNT_PF), 0);
+
+ /* loop through all PF ITR2 registers pointing them to the previous */
+ for (i = 1; i < FM10K_ITR_REG_COUNT_PF; i++)
+ fm10k_write_reg(hw, FM10K_ITR2(i), i - 1);
+
+ /* Enable interrupt moderator if not already enabled */
+ fm10k_write_reg(hw, FM10K_INT_CTRL, FM10K_INT_CTRL_ENABLEMODERATOR);
+
+ /* compute the default txqctl configuration */
+ txqctl = FM10K_TXQCTL_PF | FM10K_TXQCTL_UNLIMITED_BW |
+ (hw->mac.default_vid << FM10K_TXQCTL_VID_SHIFT);
+
+ for (i = 0; i < FM10K_MAX_QUEUES; i++) {
+ /* configure rings for 256 Queue / 32 Descriptor cache mode */
+ fm10k_write_reg(hw, FM10K_TQDLOC(i),
+ (i * FM10K_TQDLOC_BASE_32_DESC) |
+ FM10K_TQDLOC_SIZE_32_DESC);
+ fm10k_write_reg(hw, FM10K_TXQCTL(i), txqctl);
+
+ /* configure rings to provide TPH processing hints */
+ fm10k_write_reg(hw, FM10K_TPH_TXCTRL(i),
+ FM10K_TPH_TXCTRL_DESC_TPHEN |
+ FM10K_TPH_TXCTRL_DESC_RROEN |
+ FM10K_TPH_TXCTRL_DESC_WROEN |
+ FM10K_TPH_TXCTRL_DATA_RROEN);
+ fm10k_write_reg(hw, FM10K_TPH_RXCTRL(i),
+ FM10K_TPH_RXCTRL_DESC_TPHEN |
+ FM10K_TPH_RXCTRL_DESC_RROEN |
+ FM10K_TPH_RXCTRL_DATA_WROEN |
+ FM10K_TPH_RXCTRL_HDR_WROEN);
+ }
+
+ /* set max hold interval to align with 1.024 usec in all modes and
+ * store ITR scale
+ */
+ switch (hw->bus.speed) {
+ case fm10k_bus_speed_2500:
+ dma_ctrl = FM10K_DMA_CTRL_MAX_HOLD_1US_GEN1;
+ hw->mac.itr_scale = FM10K_TDLEN_ITR_SCALE_GEN1;
+ break;
+ case fm10k_bus_speed_5000:
+ dma_ctrl = FM10K_DMA_CTRL_MAX_HOLD_1US_GEN2;
+ hw->mac.itr_scale = FM10K_TDLEN_ITR_SCALE_GEN2;
+ break;
+ case fm10k_bus_speed_8000:
+ dma_ctrl = FM10K_DMA_CTRL_MAX_HOLD_1US_GEN3;
+ hw->mac.itr_scale = FM10K_TDLEN_ITR_SCALE_GEN3;
+ break;
+ default:
+ dma_ctrl = 0;
+ /* just in case, assume Gen3 ITR scale */
+ hw->mac.itr_scale = FM10K_TDLEN_ITR_SCALE_GEN3;
+ break;
+ }
+
+ /* Configure TSO flags */
+ fm10k_write_reg(hw, FM10K_DTXTCPFLGL, FM10K_TSO_FLAGS_LOW);
+ fm10k_write_reg(hw, FM10K_DTXTCPFLGH, FM10K_TSO_FLAGS_HI);
+
+ /* Enable DMA engine
+ * Set Rx Descriptor size to 32
+ * Set Minimum MSS to 64
+ * Set Maximum number of Rx queues to 256 / 32 Descriptor
+ */
+ dma_ctrl |= FM10K_DMA_CTRL_TX_ENABLE | FM10K_DMA_CTRL_RX_ENABLE |
+ FM10K_DMA_CTRL_RX_DESC_SIZE | FM10K_DMA_CTRL_MINMSS_64 |
+ FM10K_DMA_CTRL_32_DESC;
+
+ fm10k_write_reg(hw, FM10K_DMA_CTRL, dma_ctrl);
+
+ /* record maximum queue count, we limit ourselves to 128 */
+ hw->mac.max_queues = FM10K_MAX_QUEUES_PF;
+
+ /* We support either 64 VFs or 7 VFs depending on if we have ARI */
+ hw->iov.total_vfs = fm10k_is_ari_hierarchy_pf(hw) ? 64 : 7;
+
+ return 0;
+}
+
+/**
+ * fm10k_update_vlan_pf - Update status of VLAN ID in VLAN filter table
+ * @hw: pointer to hardware structure
+ * @vid: VLAN ID to add to table
+ * @vsi: Index indicating VF ID or PF ID in table
+ * @set: Indicates if this is a set or clear operation
+ *
+ * This function adds or removes the corresponding VLAN ID from the VLAN
+ * filter table for the corresponding function. In addition to the
+ * standard set/clear that supports one bit a multi-bit write is
+ * supported to set 64 bits at a time.
+ **/
+static s32 fm10k_update_vlan_pf(struct fm10k_hw *hw, u32 vid, u8 vsi, bool set)
+{
+ u32 vlan_table, reg, mask, bit, len;
+
+ /* verify the VSI index is valid */
+ if (vsi > FM10K_VLAN_TABLE_VSI_MAX)
+ return FM10K_ERR_PARAM;
+
+ /* VLAN multi-bit write:
+ * The multi-bit write has several parts to it.
+ * 24 16 8 0
+ * 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0
+ * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ * | RSVD0 | Length |C|RSVD0| VLAN ID |
+ * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
+ *
+ * VLAN ID: Vlan Starting value
+ * RSVD0: Reserved section, must be 0
+ * C: Flag field, 0 is set, 1 is clear (Used in VF VLAN message)
+ * Length: Number of times to repeat the bit being set
+ */
+ len = vid >> 16;
+ vid = (vid << 17) >> 17;
+
+ /* verify the reserved 0 fields are 0 */
+ if (len >= FM10K_VLAN_TABLE_VID_MAX || vid >= FM10K_VLAN_TABLE_VID_MAX)
+ return FM10K_ERR_PARAM;
+
+ /* Loop through the table updating all required VLANs */
+ for (reg = FM10K_VLAN_TABLE(vsi, vid / 32), bit = vid % 32;
+ len < FM10K_VLAN_TABLE_VID_MAX;
+ len -= 32 - bit, reg++, bit = 0) {
+ /* record the initial state of the register */
+ vlan_table = fm10k_read_reg(hw, reg);
+
+ /* truncate mask if we are at the start or end of the run */
+ mask = (~(u32)0 >> ((len < 31) ? 31 - len : 0)) << bit;
+
+ /* make necessary modifications to the register */
+ mask &= set ? ~vlan_table : vlan_table;
+ if (mask)
+ fm10k_write_reg(hw, reg, vlan_table ^ mask);
+ }
+
+ return 0;
+}
+
+/**
+ * fm10k_read_mac_addr_pf - Read device MAC address
+ * @hw: pointer to the HW structure
+ *
+ * Reads the device MAC address from the SM_AREA and stores the value.
+ **/
+static s32 fm10k_read_mac_addr_pf(struct fm10k_hw *hw)
+{
+ u8 perm_addr[ETH_ALEN];
+ u32 serial_num;
+
+ serial_num = fm10k_read_reg(hw, FM10K_SM_AREA(1));
+
+ /* last byte should be all 1's */
+ if ((~serial_num) << 24)
+ return FM10K_ERR_INVALID_MAC_ADDR;
+
+ perm_addr[0] = (u8)(serial_num >> 24);
+ perm_addr[1] = (u8)(serial_num >> 16);
+ perm_addr[2] = (u8)(serial_num >> 8);
+
+ serial_num = fm10k_read_reg(hw, FM10K_SM_AREA(0));
+
+ /* first byte should be all 1's */
+ if ((~serial_num) >> 24)
+ return FM10K_ERR_INVALID_MAC_ADDR;
+
+ perm_addr[3] = (u8)(serial_num >> 16);
+ perm_addr[4] = (u8)(serial_num >> 8);
+ perm_addr[5] = (u8)(serial_num);
+
+ ether_addr_copy(hw->mac.perm_addr, perm_addr);
+ ether_addr_copy(hw->mac.addr, perm_addr);
+
+ return 0;
+}
+
+/**
+ * fm10k_glort_valid_pf - Validate that the provided glort is valid
+ * @hw: pointer to the HW structure
+ * @glort: base glort to be validated
+ *
+ * This function will return an error if the provided glort is invalid
+ **/
+bool fm10k_glort_valid_pf(struct fm10k_hw *hw, u16 glort)
+{
+ glort &= hw->mac.dglort_map >> FM10K_DGLORTMAP_MASK_SHIFT;
+
+ return glort == (hw->mac.dglort_map & FM10K_DGLORTMAP_NONE);
+}
+
+/**
+ * fm10k_update_xc_addr_pf - Update device addresses
+ * @hw: pointer to the HW structure
+ * @glort: base resource tag for this request
+ * @mac: MAC address to add/remove from table
+ * @vid: VLAN ID to add/remove from table
+ * @add: Indicates if this is an add or remove operation
+ * @flags: flags field to indicate add and secure
+ *
+ * This function generates a message to the Switch API requesting
+ * that the given logical port add/remove the given L2 MAC/VLAN address.
+ **/
+static s32 fm10k_update_xc_addr_pf(struct fm10k_hw *hw, u16 glort,
+ const u8 *mac, u16 vid, bool add, u8 flags)
+{
+ struct fm10k_mbx_info *mbx = &hw->mbx;
+ struct fm10k_mac_update mac_update;
+ u32 msg[5];
+
+ /* clear set bit from VLAN ID */
+ vid &= ~FM10K_VLAN_CLEAR;
+
+ /* if glort or VLAN are not valid return error */
+ if (!fm10k_glort_valid_pf(hw, glort) || vid >= FM10K_VLAN_TABLE_VID_MAX)
+ return FM10K_ERR_PARAM;
+
+ /* record fields */
+ mac_update.mac_lower = cpu_to_le32(((u32)mac[2] << 24) |
+ ((u32)mac[3] << 16) |
+ ((u32)mac[4] << 8) |
+ ((u32)mac[5]));
+ mac_update.mac_upper = cpu_to_le16(((u16)mac[0] << 8) |
+ ((u16)mac[1]));
+ mac_update.vlan = cpu_to_le16(vid);
+ mac_update.glort = cpu_to_le16(glort);
+ mac_update.action = add ? 0 : 1;
+ mac_update.flags = flags;
+
+ /* populate mac_update fields */
+ fm10k_tlv_msg_init(msg, FM10K_PF_MSG_ID_UPDATE_MAC_FWD_RULE);
+ fm10k_tlv_attr_put_le_struct(msg, FM10K_PF_ATTR_ID_MAC_UPDATE,
+ &mac_update, sizeof(mac_update));
+
+ /* load onto outgoing mailbox */
+ return mbx->ops.enqueue_tx(hw, mbx, msg);
+}
+
+/**
+ * fm10k_update_uc_addr_pf - Update device unicast addresses
+ * @hw: pointer to the HW structure
+ * @glort: base resource tag for this request
+ * @mac: MAC address to add/remove from table
+ * @vid: VLAN ID to add/remove from table
+ * @add: Indicates if this is an add or remove operation
+ * @flags: flags field to indicate add and secure
+ *
+ * This function is used to add or remove unicast addresses for
+ * the PF.
+ **/
+static s32 fm10k_update_uc_addr_pf(struct fm10k_hw *hw, u16 glort,
+ const u8 *mac, u16 vid, bool add, u8 flags)
+{
+ /* verify MAC address is valid */
+ if (!is_valid_ether_addr(mac))
+ return FM10K_ERR_PARAM;
+
+ return fm10k_update_xc_addr_pf(hw, glort, mac, vid, add, flags);
+}
+
+/**
+ * fm10k_update_mc_addr_pf - Update device multicast addresses
+ * @hw: pointer to the HW structure
+ * @glort: base resource tag for this request
+ * @mac: MAC address to add/remove from table
+ * @vid: VLAN ID to add/remove from table
+ * @add: Indicates if this is an add or remove operation
+ *
+ * This function is used to add or remove multicast MAC addresses for
+ * the PF.
+ **/
+static s32 fm10k_update_mc_addr_pf(struct fm10k_hw *hw, u16 glort,
+ const u8 *mac, u16 vid, bool add)
+{
+ /* verify multicast address is valid */
+ if (!is_multicast_ether_addr(mac))
+ return FM10K_ERR_PARAM;
+
+ return fm10k_update_xc_addr_pf(hw, glort, mac, vid, add, 0);
+}
+
+/**
+ * fm10k_update_xcast_mode_pf - Request update of multicast mode
+ * @hw: pointer to hardware structure
+ * @glort: base resource tag for this request
+ * @mode: integer value indicating mode being requested
+ *
+ * This function will attempt to request a higher mode for the port
+ * so that it can enable either multicast, multicast promiscuous, or
+ * promiscuous mode of operation.
+ **/
+static s32 fm10k_update_xcast_mode_pf(struct fm10k_hw *hw, u16 glort, u8 mode)
+{
+ struct fm10k_mbx_info *mbx = &hw->mbx;
+ u32 msg[3], xcast_mode;
+
+ if (mode > FM10K_XCAST_MODE_NONE)
+ return FM10K_ERR_PARAM;
+
+ /* if glort is not valid return error */
+ if (!fm10k_glort_valid_pf(hw, glort))
+ return FM10K_ERR_PARAM;
+
+ /* write xcast mode as a single u32 value,
+ * lower 16 bits: glort
+ * upper 16 bits: mode
+ */
+ xcast_mode = ((u32)mode << 16) | glort;
+
+ /* generate message requesting to change xcast mode */
+ fm10k_tlv_msg_init(msg, FM10K_PF_MSG_ID_XCAST_MODES);
+ fm10k_tlv_attr_put_u32(msg, FM10K_PF_ATTR_ID_XCAST_MODE, xcast_mode);
+
+ /* load onto outgoing mailbox */
+ return mbx->ops.enqueue_tx(hw, mbx, msg);
+}
+
+/**
+ * fm10k_update_int_moderator_pf - Update interrupt moderator linked list
+ * @hw: pointer to hardware structure
+ *
+ * This function walks through the MSI-X vector table to determine the
+ * number of active interrupts and based on that information updates the
+ * interrupt moderator linked list.
+ **/
+static void fm10k_update_int_moderator_pf(struct fm10k_hw *hw)
+{
+ u32 i;
+
+ /* Disable interrupt moderator */
+ fm10k_write_reg(hw, FM10K_INT_CTRL, 0);
+
+ /* loop through PF from last to first looking enabled vectors */
+ for (i = FM10K_ITR_REG_COUNT_PF - 1; i; i--) {
+ if (!fm10k_read_reg(hw, FM10K_MSIX_VECTOR_MASK(i)))
+ break;
+ }
+
+ /* always reset VFITR2[0] to point to last enabled PF vector */
+ fm10k_write_reg(hw, FM10K_ITR2(FM10K_ITR_REG_COUNT_PF), i);
+
+ /* reset ITR2[0] to point to last enabled PF vector */
+ if (!hw->iov.num_vfs)
+ fm10k_write_reg(hw, FM10K_ITR2(0), i);
+
+ /* Enable interrupt moderator */
+ fm10k_write_reg(hw, FM10K_INT_CTRL, FM10K_INT_CTRL_ENABLEMODERATOR);
+}
+
+/**
+ * fm10k_update_lport_state_pf - Notify the switch of a change in port state
+ * @hw: pointer to the HW structure
+ * @glort: base resource tag for this request
+ * @count: number of logical ports being updated
+ * @enable: boolean value indicating enable or disable
+ *
+ * This function is used to add/remove a logical port from the switch.
+ **/
+static s32 fm10k_update_lport_state_pf(struct fm10k_hw *hw, u16 glort,
+ u16 count, bool enable)
+{
+ struct fm10k_mbx_info *mbx = &hw->mbx;
+ u32 msg[3], lport_msg;
+
+ /* do nothing if we are being asked to create or destroy 0 ports */
+ if (!count)
+ return 0;
+
+ /* if glort is not valid return error */
+ if (!fm10k_glort_valid_pf(hw, glort))
+ return FM10K_ERR_PARAM;
+
+ /* reset multicast mode if deleting lport */
+ if (!enable)
+ fm10k_update_xcast_mode_pf(hw, glort, FM10K_XCAST_MODE_NONE);
+
+ /* construct the lport message from the 2 pieces of data we have */
+ lport_msg = ((u32)count << 16) | glort;
+
+ /* generate lport create/delete message */
+ fm10k_tlv_msg_init(msg, enable ? FM10K_PF_MSG_ID_LPORT_CREATE :
+ FM10K_PF_MSG_ID_LPORT_DELETE);
+ fm10k_tlv_attr_put_u32(msg, FM10K_PF_ATTR_ID_PORT, lport_msg);
+
+ /* load onto outgoing mailbox */
+ return mbx->ops.enqueue_tx(hw, mbx, msg);
+}
+
+/**
+ * fm10k_configure_dglort_map_pf - Configures GLORT entry and queues
+ * @hw: pointer to hardware structure
+ * @dglort: pointer to dglort configuration structure
+ *
+ * Reads the configuration structure contained in dglort_cfg and uses
+ * that information to then populate a DGLORTMAP/DEC entry and the queues
+ * to which it has been assigned.
+ **/
+static s32 fm10k_configure_dglort_map_pf(struct fm10k_hw *hw,
+ struct fm10k_dglort_cfg *dglort)
+{
+ u16 glort, queue_count, vsi_count, pc_count;
+ u16 vsi, queue, pc, q_idx;
+ u32 txqctl, dglortdec, dglortmap;
+
+ /* verify the dglort pointer */
+ if (!dglort)
+ return FM10K_ERR_PARAM;
+
+ /* verify the dglort values */
+ if ((dglort->idx > 7) || (dglort->rss_l > 7) || (dglort->pc_l > 3) ||
+ (dglort->vsi_l > 6) || (dglort->vsi_b > 64) ||
+ (dglort->queue_l > 8) || (dglort->queue_b >= 256))
+ return FM10K_ERR_PARAM;
+
+ /* determine count of VSIs and queues */
+ queue_count = BIT(dglort->rss_l + dglort->pc_l);
+ vsi_count = BIT(dglort->vsi_l + dglort->queue_l);
+ glort = dglort->glort;
+ q_idx = dglort->queue_b;
+
+ /* configure SGLORT for queues */
+ for (vsi = 0; vsi < vsi_count; vsi++, glort++) {
+ for (queue = 0; queue < queue_count; queue++, q_idx++) {
+ if (q_idx >= FM10K_MAX_QUEUES)
+ break;
+
+ fm10k_write_reg(hw, FM10K_TX_SGLORT(q_idx), glort);
+ fm10k_write_reg(hw, FM10K_RX_SGLORT(q_idx), glort);
+ }
+ }
+
+ /* determine count of PCs and queues */
+ queue_count = BIT(dglort->queue_l + dglort->rss_l + dglort->vsi_l);
+ pc_count = BIT(dglort->pc_l);
+
+ /* configure PC for Tx queues */
+ for (pc = 0; pc < pc_count; pc++) {
+ q_idx = pc + dglort->queue_b;
+ for (queue = 0; queue < queue_count; queue++) {
+ if (q_idx >= FM10K_MAX_QUEUES)
+ break;
+
+ txqctl = fm10k_read_reg(hw, FM10K_TXQCTL(q_idx));
+ txqctl &= ~FM10K_TXQCTL_PC_MASK;
+ txqctl |= pc << FM10K_TXQCTL_PC_SHIFT;
+ fm10k_write_reg(hw, FM10K_TXQCTL(q_idx), txqctl);
+
+ q_idx += pc_count;
+ }
+ }
+
+ /* configure DGLORTDEC */
+ dglortdec = ((u32)(dglort->rss_l) << FM10K_DGLORTDEC_RSSLENGTH_SHIFT) |
+ ((u32)(dglort->queue_b) << FM10K_DGLORTDEC_QBASE_SHIFT) |
+ ((u32)(dglort->pc_l) << FM10K_DGLORTDEC_PCLENGTH_SHIFT) |
+ ((u32)(dglort->vsi_b) << FM10K_DGLORTDEC_VSIBASE_SHIFT) |
+ ((u32)(dglort->vsi_l) << FM10K_DGLORTDEC_VSILENGTH_SHIFT) |
+ ((u32)(dglort->queue_l));
+ if (dglort->inner_rss)
+ dglortdec |= FM10K_DGLORTDEC_INNERRSS_ENABLE;
+
+ /* configure DGLORTMAP */
+ dglortmap = (dglort->idx == fm10k_dglort_default) ?
+ FM10K_DGLORTMAP_ANY : FM10K_DGLORTMAP_ZERO;
+ dglortmap <<= dglort->vsi_l + dglort->queue_l + dglort->shared_l;
+ dglortmap |= dglort->glort;
+
+ /* write values to hardware */
+ fm10k_write_reg(hw, FM10K_DGLORTDEC(dglort->idx), dglortdec);
+ fm10k_write_reg(hw, FM10K_DGLORTMAP(dglort->idx), dglortmap);
+
+ return 0;
+}
+
+u16 fm10k_queues_per_pool(struct fm10k_hw *hw)
+{
+ u16 num_pools = hw->iov.num_pools;
+
+ return (num_pools > 32) ? 2 : (num_pools > 16) ? 4 : (num_pools > 8) ?
+ 8 : FM10K_MAX_QUEUES_POOL;
+}
+
+u16 fm10k_vf_queue_index(struct fm10k_hw *hw, u16 vf_idx)
+{
+ u16 num_vfs = hw->iov.num_vfs;
+ u16 vf_q_idx = FM10K_MAX_QUEUES;
+
+ vf_q_idx -= fm10k_queues_per_pool(hw) * (num_vfs - vf_idx);
+
+ return vf_q_idx;
+}
+
+static u16 fm10k_vectors_per_pool(struct fm10k_hw *hw)
+{
+ u16 num_pools = hw->iov.num_pools;
+
+ return (num_pools > 32) ? 8 : (num_pools > 16) ? 16 :
+ FM10K_MAX_VECTORS_POOL;
+}
+
+static u16 fm10k_vf_vector_index(struct fm10k_hw *hw, u16 vf_idx)
+{
+ u16 vf_v_idx = FM10K_MAX_VECTORS_PF;
+
+ vf_v_idx += fm10k_vectors_per_pool(hw) * vf_idx;
+
+ return vf_v_idx;
+}
+
+/**
+ * fm10k_iov_assign_resources_pf - Assign pool resources for virtualization
+ * @hw: pointer to the HW structure
+ * @num_vfs: number of VFs to be allocated
+ * @num_pools: number of virtualization pools to be allocated
+ *
+ * Allocates queues and traffic classes to virtualization entities to prepare
+ * the PF for SR-IOV and VMDq
+ **/
+static s32 fm10k_iov_assign_resources_pf(struct fm10k_hw *hw, u16 num_vfs,
+ u16 num_pools)
+{
+ u16 qmap_stride, qpp, vpp, vf_q_idx, vf_q_idx0, qmap_idx;
+ u32 vid = hw->mac.default_vid << FM10K_TXQCTL_VID_SHIFT;
+ int i, j;
+
+ /* hardware only supports up to 64 pools */
+ if (num_pools > 64)
+ return FM10K_ERR_PARAM;
+
+ /* the number of VFs cannot exceed the number of pools */
+ if ((num_vfs > num_pools) || (num_vfs > hw->iov.total_vfs))
+ return FM10K_ERR_PARAM;
+
+ /* record number of virtualization entities */
+ hw->iov.num_vfs = num_vfs;
+ hw->iov.num_pools = num_pools;
+
+ /* determine qmap offsets and counts */
+ qmap_stride = (num_vfs > 8) ? 32 : 256;
+ qpp = fm10k_queues_per_pool(hw);
+ vpp = fm10k_vectors_per_pool(hw);
+
+ /* calculate starting index for queues */
+ vf_q_idx = fm10k_vf_queue_index(hw, 0);
+ qmap_idx = 0;
+
+ /* establish TCs with -1 credits and no quanta to prevent transmit */
+ for (i = 0; i < num_vfs; i++) {
+ fm10k_write_reg(hw, FM10K_TC_MAXCREDIT(i), 0);
+ fm10k_write_reg(hw, FM10K_TC_RATE(i), 0);
+ fm10k_write_reg(hw, FM10K_TC_CREDIT(i),
+ FM10K_TC_CREDIT_CREDIT_MASK);
+ }
+
+ /* zero out all mbmem registers */
+ for (i = FM10K_VFMBMEM_LEN * num_vfs; i--;)
+ fm10k_write_reg(hw, FM10K_MBMEM(i), 0);
+
+ /* clear event notification of VF FLR */
+ fm10k_write_reg(hw, FM10K_PFVFLREC(0), ~0);
+ fm10k_write_reg(hw, FM10K_PFVFLREC(1), ~0);
+
+ /* loop through unallocated rings assigning them back to PF */
+ for (i = FM10K_MAX_QUEUES_PF; i < vf_q_idx; i++) {
+ fm10k_write_reg(hw, FM10K_TXDCTL(i), 0);
+ fm10k_write_reg(hw, FM10K_TXQCTL(i), FM10K_TXQCTL_PF |
+ FM10K_TXQCTL_UNLIMITED_BW | vid);
+ fm10k_write_reg(hw, FM10K_RXQCTL(i), FM10K_RXQCTL_PF);
+ }
+
+ /* PF should have already updated VFITR2[0] */
+
+ /* update all ITR registers to flow to VFITR2[0] */
+ for (i = FM10K_ITR_REG_COUNT_PF + 1; i < FM10K_ITR_REG_COUNT; i++) {
+ if (!(i & (vpp - 1)))
+ fm10k_write_reg(hw, FM10K_ITR2(i), i - vpp);
+ else
+ fm10k_write_reg(hw, FM10K_ITR2(i), i - 1);
+ }
+
+ /* update PF ITR2[0] to reference the last vector */
+ fm10k_write_reg(hw, FM10K_ITR2(0),
+ fm10k_vf_vector_index(hw, num_vfs - 1));
+
+ /* loop through rings populating rings and TCs */
+ for (i = 0; i < num_vfs; i++) {
+ /* record index for VF queue 0 for use in end of loop */
+ vf_q_idx0 = vf_q_idx;
+
+ for (j = 0; j < qpp; j++, qmap_idx++, vf_q_idx++) {
+ /* assign VF and locked TC to queues */
+ fm10k_write_reg(hw, FM10K_TXDCTL(vf_q_idx), 0);
+ fm10k_write_reg(hw, FM10K_TXQCTL(vf_q_idx),
+ (i << FM10K_TXQCTL_TC_SHIFT) | i |
+ FM10K_TXQCTL_VF | vid);
+ fm10k_write_reg(hw, FM10K_RXDCTL(vf_q_idx),
+ FM10K_RXDCTL_WRITE_BACK_MIN_DELAY |
+ FM10K_RXDCTL_DROP_ON_EMPTY);
+ fm10k_write_reg(hw, FM10K_RXQCTL(vf_q_idx),
+ (i << FM10K_RXQCTL_VF_SHIFT) |
+ FM10K_RXQCTL_VF);
+
+ /* map queue pair to VF */
+ fm10k_write_reg(hw, FM10K_TQMAP(qmap_idx), vf_q_idx);
+ fm10k_write_reg(hw, FM10K_RQMAP(qmap_idx), vf_q_idx);
+ }
+
+ /* repeat the first ring for all of the remaining VF rings */
+ for (; j < qmap_stride; j++, qmap_idx++) {
+ fm10k_write_reg(hw, FM10K_TQMAP(qmap_idx), vf_q_idx0);
+ fm10k_write_reg(hw, FM10K_RQMAP(qmap_idx), vf_q_idx0);
+ }
+ }
+
+ /* loop through remaining indexes assigning all to queue 0 */
+ while (qmap_idx < FM10K_TQMAP_TABLE_SIZE) {
+ fm10k_write_reg(hw, FM10K_TQMAP(qmap_idx), 0);
+ fm10k_write_reg(hw, FM10K_RQMAP(qmap_idx), 0);
+ qmap_idx++;
+ }
+
+ return 0;
+}
+
+/**
+ * fm10k_iov_configure_tc_pf - Configure the shaping group for VF
+ * @hw: pointer to the HW structure
+ * @vf_idx: index of VF receiving GLORT
+ * @rate: Rate indicated in Mb/s
+ *
+ * Configured the TC for a given VF to allow only up to a given number
+ * of Mb/s of outgoing Tx throughput.
+ **/
+static s32 fm10k_iov_configure_tc_pf(struct fm10k_hw *hw, u16 vf_idx, int rate)
+{
+ /* configure defaults */
+ u32 interval = FM10K_TC_RATE_INTERVAL_4US_GEN3;
+ u32 tc_rate = FM10K_TC_RATE_QUANTA_MASK;
+
+ /* verify vf is in range */
+ if (vf_idx >= hw->iov.num_vfs)
+ return FM10K_ERR_PARAM;
+
+ /* set interval to align with 4.096 usec in all modes */
+ switch (hw->bus.speed) {
+ case fm10k_bus_speed_2500:
+ interval = FM10K_TC_RATE_INTERVAL_4US_GEN1;
+ break;
+ case fm10k_bus_speed_5000:
+ interval = FM10K_TC_RATE_INTERVAL_4US_GEN2;
+ break;
+ default:
+ break;
+ }
+
+ if (rate) {
+ if (rate > FM10K_VF_TC_MAX || rate < FM10K_VF_TC_MIN)
+ return FM10K_ERR_PARAM;
+
+ /* The quanta is measured in Bytes per 4.096 or 8.192 usec
+ * The rate is provided in Mbits per second
+ * To tralslate from rate to quanta we need to multiply the
+ * rate by 8.192 usec and divide by 8 bits/byte. To avoid
+ * dealing with floating point we can round the values up
+ * to the nearest whole number ratio which gives us 128 / 125.
+ */
+ tc_rate = (rate * 128) / 125;
+
+ /* try to keep the rate limiting accurate by increasing
+ * the number of credits and interval for rates less than 4Gb/s
+ */
+ if (rate < 4000)
+ interval <<= 1;
+ else
+ tc_rate >>= 1;
+ }
+
+ /* update rate limiter with new values */
+ fm10k_write_reg(hw, FM10K_TC_RATE(vf_idx), tc_rate | interval);
+ fm10k_write_reg(hw, FM10K_TC_MAXCREDIT(vf_idx), FM10K_TC_MAXCREDIT_64K);
+ fm10k_write_reg(hw, FM10K_TC_CREDIT(vf_idx), FM10K_TC_MAXCREDIT_64K);
+
+ return 0;
+}
+
+/**
+ * fm10k_iov_assign_int_moderator_pf - Add VF interrupts to moderator list
+ * @hw: pointer to the HW structure
+ * @vf_idx: index of VF receiving GLORT
+ *
+ * Update the interrupt moderator linked list to include any MSI-X
+ * interrupts which the VF has enabled in the MSI-X vector table.
+ **/
+static s32 fm10k_iov_assign_int_moderator_pf(struct fm10k_hw *hw, u16 vf_idx)
+{
+ u16 vf_v_idx, vf_v_limit, i;
+
+ /* verify vf is in range */
+ if (vf_idx >= hw->iov.num_vfs)
+ return FM10K_ERR_PARAM;
+
+ /* determine vector offset and count */
+ vf_v_idx = fm10k_vf_vector_index(hw, vf_idx);
+ vf_v_limit = vf_v_idx + fm10k_vectors_per_pool(hw);
+
+ /* search for first vector that is not masked */
+ for (i = vf_v_limit - 1; i > vf_v_idx; i--) {
+ if (!fm10k_read_reg(hw, FM10K_MSIX_VECTOR_MASK(i)))
+ break;
+ }
+
+ /* reset linked list so it now includes our active vectors */
+ if (vf_idx == (hw->iov.num_vfs - 1))
+ fm10k_write_reg(hw, FM10K_ITR2(0), i);
+ else
+ fm10k_write_reg(hw, FM10K_ITR2(vf_v_limit), i);
+
+ return 0;
+}
+
+/**
+ * fm10k_iov_assign_default_mac_vlan_pf - Assign a MAC and VLAN to VF
+ * @hw: pointer to the HW structure
+ * @vf_info: pointer to VF information structure
+ *
+ * Assign a MAC address and default VLAN to a VF and notify it of the update
+ **/
+static s32 fm10k_iov_assign_default_mac_vlan_pf(struct fm10k_hw *hw,
+ struct fm10k_vf_info *vf_info)
+{
+ u16 qmap_stride, queues_per_pool, vf_q_idx, timeout, qmap_idx, i;
+ u32 msg[4], txdctl, txqctl, tdbal = 0, tdbah = 0;
+ s32 err = 0;
+ u16 vf_idx, vf_vid;
+
+ /* verify vf is in range */
+ if (!vf_info || vf_info->vf_idx >= hw->iov.num_vfs)
+ return FM10K_ERR_PARAM;
+
+ /* determine qmap offsets and counts */
+ qmap_stride = (hw->iov.num_vfs > 8) ? 32 : 256;
+ queues_per_pool = fm10k_queues_per_pool(hw);
+
+ /* calculate starting index for queues */
+ vf_idx = vf_info->vf_idx;
+ vf_q_idx = fm10k_vf_queue_index(hw, vf_idx);
+ qmap_idx = qmap_stride * vf_idx;
+
+ /* Determine correct default VLAN ID. The FM10K_VLAN_OVERRIDE bit is
+ * used here to indicate to the VF that it will not have privilege to
+ * write VLAN_TABLE. All policy is enforced on the PF but this allows
+ * the VF to correctly report errors to userspace requests.
+ */
+ if (vf_info->pf_vid)
+ vf_vid = vf_info->pf_vid | FM10K_VLAN_OVERRIDE;
+ else
+ vf_vid = vf_info->sw_vid;
+
+ /* generate MAC_ADDR request */
+ fm10k_tlv_msg_init(msg, FM10K_VF_MSG_ID_MAC_VLAN);
+ fm10k_tlv_attr_put_mac_vlan(msg, FM10K_MAC_VLAN_MSG_DEFAULT_MAC,
+ vf_info->mac, vf_vid);
+
+ /* Configure Queue control register with new VLAN ID. The TXQCTL
+ * register is RO from the VF, so the PF must do this even in the
+ * case of notifying the VF of a new VID via the mailbox.
+ */
+ txqctl = ((u32)vf_vid << FM10K_TXQCTL_VID_SHIFT) &
+ FM10K_TXQCTL_VID_MASK;
+ txqctl |= (vf_idx << FM10K_TXQCTL_TC_SHIFT) |
+ FM10K_TXQCTL_VF | vf_idx;
+
+ for (i = 0; i < queues_per_pool; i++)
+ fm10k_write_reg(hw, FM10K_TXQCTL(vf_q_idx + i), txqctl);
+
+ /* try loading a message onto outgoing mailbox first */
+ if (vf_info->mbx.ops.enqueue_tx) {
+ err = vf_info->mbx.ops.enqueue_tx(hw, &vf_info->mbx, msg);
+ if (err != FM10K_MBX_ERR_NO_MBX)
+ return err;
+ err = 0;
+ }
+
+ /* If we aren't connected to a mailbox, this is most likely because
+ * the VF driver is not running. It should thus be safe to re-map
+ * queues and use the registers to pass the MAC address so that the VF
+ * driver gets correct information during its initialization.
+ */
+
+ /* MAP Tx queue back to 0 temporarily, and disable it */
+ fm10k_write_reg(hw, FM10K_TQMAP(qmap_idx), 0);
+ fm10k_write_reg(hw, FM10K_TXDCTL(vf_q_idx), 0);
+
+ /* verify ring has disabled before modifying base address registers */
+ txdctl = fm10k_read_reg(hw, FM10K_TXDCTL(vf_q_idx));
+ for (timeout = 0; txdctl & FM10K_TXDCTL_ENABLE; timeout++) {
+ /* limit ourselves to a 1ms timeout */
+ if (timeout == 10) {
+ err = FM10K_ERR_DMA_PENDING;
+ goto err_out;
+ }
+
+ usleep_range(100, 200);
+ txdctl = fm10k_read_reg(hw, FM10K_TXDCTL(vf_q_idx));
+ }
+
+ /* Update base address registers to contain MAC address */
+ if (is_valid_ether_addr(vf_info->mac)) {
+ tdbal = (((u32)vf_info->mac[3]) << 24) |
+ (((u32)vf_info->mac[4]) << 16) |
+ (((u32)vf_info->mac[5]) << 8);
+
+ tdbah = (((u32)0xFF) << 24) |
+ (((u32)vf_info->mac[0]) << 16) |
+ (((u32)vf_info->mac[1]) << 8) |
+ ((u32)vf_info->mac[2]);
+ }
+
+ /* Record the base address into queue 0 */
+ fm10k_write_reg(hw, FM10K_TDBAL(vf_q_idx), tdbal);
+ fm10k_write_reg(hw, FM10K_TDBAH(vf_q_idx), tdbah);
+
+ /* Provide the VF the ITR scale, using software-defined fields in TDLEN
+ * to pass the information during VF initialization. See definition of
+ * FM10K_TDLEN_ITR_SCALE_SHIFT for more details.
+ */
+ fm10k_write_reg(hw, FM10K_TDLEN(vf_q_idx), hw->mac.itr_scale <<
+ FM10K_TDLEN_ITR_SCALE_SHIFT);
+
+err_out:
+ /* restore the queue back to VF ownership */
+ fm10k_write_reg(hw, FM10K_TQMAP(qmap_idx), vf_q_idx);
+ return err;
+}
+
+/**
+ * fm10k_iov_reset_resources_pf - Reassign queues and interrupts to a VF
+ * @hw: pointer to the HW structure
+ * @vf_info: pointer to VF information structure
+ *
+ * Reassign the interrupts and queues to a VF following an FLR
+ **/
+static s32 fm10k_iov_reset_resources_pf(struct fm10k_hw *hw,
+ struct fm10k_vf_info *vf_info)
+{
+ u16 qmap_stride, queues_per_pool, vf_q_idx, qmap_idx;
+ u32 tdbal = 0, tdbah = 0, txqctl, rxqctl;
+ u16 vf_v_idx, vf_v_limit, vf_vid;
+ u8 vf_idx = vf_info->vf_idx;
+ int i;
+
+ /* verify vf is in range */
+ if (vf_idx >= hw->iov.num_vfs)
+ return FM10K_ERR_PARAM;
+
+ /* clear event notification of VF FLR */
+ fm10k_write_reg(hw, FM10K_PFVFLREC(vf_idx / 32), BIT(vf_idx % 32));
+
+ /* force timeout and then disconnect the mailbox */
+ vf_info->mbx.timeout = 0;
+ if (vf_info->mbx.ops.disconnect)
+ vf_info->mbx.ops.disconnect(hw, &vf_info->mbx);
+
+ /* determine vector offset and count */
+ vf_v_idx = fm10k_vf_vector_index(hw, vf_idx);
+ vf_v_limit = vf_v_idx + fm10k_vectors_per_pool(hw);
+
+ /* determine qmap offsets and counts */
+ qmap_stride = (hw->iov.num_vfs > 8) ? 32 : 256;
+ queues_per_pool = fm10k_queues_per_pool(hw);
+ qmap_idx = qmap_stride * vf_idx;
+
+ /* make all the queues inaccessible to the VF */
+ for (i = qmap_idx; i < (qmap_idx + qmap_stride); i++) {
+ fm10k_write_reg(hw, FM10K_TQMAP(i), 0);
+ fm10k_write_reg(hw, FM10K_RQMAP(i), 0);
+ }
+
+ /* calculate starting index for queues */
+ vf_q_idx = fm10k_vf_queue_index(hw, vf_idx);
+
+ /* determine correct default VLAN ID */
+ if (vf_info->pf_vid)
+ vf_vid = vf_info->pf_vid;
+ else
+ vf_vid = vf_info->sw_vid;
+
+ /* configure Queue control register */
+ txqctl = ((u32)vf_vid << FM10K_TXQCTL_VID_SHIFT) |
+ (vf_idx << FM10K_TXQCTL_TC_SHIFT) |
+ FM10K_TXQCTL_VF | vf_idx;
+ rxqctl = (vf_idx << FM10K_RXQCTL_VF_SHIFT) | FM10K_RXQCTL_VF;
+
+ /* stop further DMA and reset queue ownership back to VF */
+ for (i = vf_q_idx; i < (queues_per_pool + vf_q_idx); i++) {
+ fm10k_write_reg(hw, FM10K_TXDCTL(i), 0);
+ fm10k_write_reg(hw, FM10K_TXQCTL(i), txqctl);
+ fm10k_write_reg(hw, FM10K_RXDCTL(i),
+ FM10K_RXDCTL_WRITE_BACK_MIN_DELAY |
+ FM10K_RXDCTL_DROP_ON_EMPTY);
+ fm10k_write_reg(hw, FM10K_RXQCTL(i), rxqctl);
+ }
+
+ /* reset TC with -1 credits and no quanta to prevent transmit */
+ fm10k_write_reg(hw, FM10K_TC_MAXCREDIT(vf_idx), 0);
+ fm10k_write_reg(hw, FM10K_TC_RATE(vf_idx), 0);
+ fm10k_write_reg(hw, FM10K_TC_CREDIT(vf_idx),
+ FM10K_TC_CREDIT_CREDIT_MASK);
+
+ /* update our first entry in the table based on previous VF */
+ if (!vf_idx)
+ hw->mac.ops.update_int_moderator(hw);
+ else
+ hw->iov.ops.assign_int_moderator(hw, vf_idx - 1);
+
+ /* reset linked list so it now includes our active vectors */
+ if (vf_idx == (hw->iov.num_vfs - 1))
+ fm10k_write_reg(hw, FM10K_ITR2(0), vf_v_idx);
+ else
+ fm10k_write_reg(hw, FM10K_ITR2(vf_v_limit), vf_v_idx);
+
+ /* link remaining vectors so that next points to previous */
+ for (vf_v_idx++; vf_v_idx < vf_v_limit; vf_v_idx++)
+ fm10k_write_reg(hw, FM10K_ITR2(vf_v_idx), vf_v_idx - 1);
+
+ /* zero out MBMEM, VLAN_TABLE, RETA, RSSRK, and MRQC registers */
+ for (i = FM10K_VFMBMEM_LEN; i--;)
+ fm10k_write_reg(hw, FM10K_MBMEM_VF(vf_idx, i), 0);
+ for (i = FM10K_VLAN_TABLE_SIZE; i--;)
+ fm10k_write_reg(hw, FM10K_VLAN_TABLE(vf_info->vsi, i), 0);
+ for (i = FM10K_RETA_SIZE; i--;)
+ fm10k_write_reg(hw, FM10K_RETA(vf_info->vsi, i), 0);
+ for (i = FM10K_RSSRK_SIZE; i--;)
+ fm10k_write_reg(hw, FM10K_RSSRK(vf_info->vsi, i), 0);
+ fm10k_write_reg(hw, FM10K_MRQC(vf_info->vsi), 0);
+
+ /* Update base address registers to contain MAC address */
+ if (is_valid_ether_addr(vf_info->mac)) {
+ tdbal = (((u32)vf_info->mac[3]) << 24) |
+ (((u32)vf_info->mac[4]) << 16) |
+ (((u32)vf_info->mac[5]) << 8);
+ tdbah = (((u32)0xFF) << 24) |
+ (((u32)vf_info->mac[0]) << 16) |
+ (((u32)vf_info->mac[1]) << 8) |
+ ((u32)vf_info->mac[2]);
+ }
+
+ /* map queue pairs back to VF from last to first */
+ for (i = queues_per_pool; i--;) {
+ fm10k_write_reg(hw, FM10K_TDBAL(vf_q_idx + i), tdbal);
+ fm10k_write_reg(hw, FM10K_TDBAH(vf_q_idx + i), tdbah);
+ /* See definition of FM10K_TDLEN_ITR_SCALE_SHIFT for an
+ * explanation of how TDLEN is used.
+ */
+ fm10k_write_reg(hw, FM10K_TDLEN(vf_q_idx + i),
+ hw->mac.itr_scale <<
+ FM10K_TDLEN_ITR_SCALE_SHIFT);
+ fm10k_write_reg(hw, FM10K_TQMAP(qmap_idx + i), vf_q_idx + i);
+ fm10k_write_reg(hw, FM10K_RQMAP(qmap_idx + i), vf_q_idx + i);
+ }
+
+ /* repeat the first ring for all the remaining VF rings */
+ for (i = queues_per_pool; i < qmap_stride; i++) {
+ fm10k_write_reg(hw, FM10K_TQMAP(qmap_idx + i), vf_q_idx);
+ fm10k_write_reg(hw, FM10K_RQMAP(qmap_idx + i), vf_q_idx);
+ }
+
+ return 0;
+}
+
+/**
+ * fm10k_iov_set_lport_pf - Assign and enable a logical port for a given VF
+ * @hw: pointer to hardware structure
+ * @vf_info: pointer to VF information structure
+ * @lport_idx: Logical port offset from the hardware glort
+ * @flags: Set of capability flags to extend port beyond basic functionality
+ *
+ * This function allows enabling a VF port by assigning it a GLORT and
+ * setting the flags so that it can enable an Rx mode.
+ **/
+static s32 fm10k_iov_set_lport_pf(struct fm10k_hw *hw,
+ struct fm10k_vf_info *vf_info,
+ u16 lport_idx, u8 flags)
+{
+ u16 glort = (hw->mac.dglort_map + lport_idx) & FM10K_DGLORTMAP_NONE;
+
+ /* if glort is not valid return error */
+ if (!fm10k_glort_valid_pf(hw, glort))
+ return FM10K_ERR_PARAM;
+
+ vf_info->vf_flags = flags | FM10K_VF_FLAG_NONE_CAPABLE;
+ vf_info->glort = glort;
+
+ return 0;
+}
+
+/**
+ * fm10k_iov_reset_lport_pf - Disable a logical port for a given VF
+ * @hw: pointer to hardware structure
+ * @vf_info: pointer to VF information structure
+ *
+ * This function disables a VF port by stripping it of a GLORT and
+ * setting the flags so that it cannot enable any Rx mode.
+ **/
+static void fm10k_iov_reset_lport_pf(struct fm10k_hw *hw,
+ struct fm10k_vf_info *vf_info)
+{
+ u32 msg[1];
+
+ /* need to disable the port if it is already enabled */
+ if (FM10K_VF_FLAG_ENABLED(vf_info)) {
+ /* notify switch that this port has been disabled */
+ fm10k_update_lport_state_pf(hw, vf_info->glort, 1, false);
+
+ /* generate port state response to notify VF it is not ready */
+ fm10k_tlv_msg_init(msg, FM10K_VF_MSG_ID_LPORT_STATE);
+ vf_info->mbx.ops.enqueue_tx(hw, &vf_info->mbx, msg);
+ }
+
+ /* clear flags and glort if it exists */
+ vf_info->vf_flags = 0;
+ vf_info->glort = 0;
+}
+
+/**
+ * fm10k_iov_update_stats_pf - Updates hardware related statistics for VFs
+ * @hw: pointer to hardware structure
+ * @q: stats for all queues of a VF
+ * @vf_idx: index of VF
+ *
+ * This function collects queue stats for VFs.
+ **/
+static void fm10k_iov_update_stats_pf(struct fm10k_hw *hw,
+ struct fm10k_hw_stats_q *q,
+ u16 vf_idx)
+{
+ u32 idx, qpp;
+
+ /* get stats for all of the queues */
+ qpp = fm10k_queues_per_pool(hw);
+ idx = fm10k_vf_queue_index(hw, vf_idx);
+ fm10k_update_hw_stats_q(hw, q, idx, qpp);
+}
+
+/**
+ * fm10k_iov_msg_msix_pf - Message handler for MSI-X request from VF
+ * @hw: Pointer to hardware structure
+ * @results: Pointer array to message, results[0] is pointer to message
+ * @mbx: Pointer to mailbox information structure
+ *
+ * This function is a default handler for MSI-X requests from the VF. The
+ * assumption is that in this case it is acceptable to just directly
+ * hand off the message from the VF to the underlying shared code.
+ **/
+s32 fm10k_iov_msg_msix_pf(struct fm10k_hw *hw, u32 __always_unused **results,
+ struct fm10k_mbx_info *mbx)
+{
+ struct fm10k_vf_info *vf_info = (struct fm10k_vf_info *)mbx;
+ u8 vf_idx = vf_info->vf_idx;
+
+ return hw->iov.ops.assign_int_moderator(hw, vf_idx);
+}
+
+/**
+ * fm10k_iov_select_vid - Select correct default VLAN ID
+ * @vf_info: pointer to VF information structure
+ * @vid: VLAN ID to correct
+ *
+ * Will report an error if the VLAN ID is out of range. For VID = 0, it will
+ * return either the pf_vid or sw_vid depending on which one is set.
+ */
+s32 fm10k_iov_select_vid(struct fm10k_vf_info *vf_info, u16 vid)
+{
+ if (!vid)
+ return vf_info->pf_vid ? vf_info->pf_vid : vf_info->sw_vid;
+ else if (vf_info->pf_vid && vid != vf_info->pf_vid)
+ return FM10K_ERR_PARAM;
+ else
+ return vid;
+}
+
+/**
+ * fm10k_iov_msg_mac_vlan_pf - Message handler for MAC/VLAN request from VF
+ * @hw: Pointer to hardware structure
+ * @results: Pointer array to message, results[0] is pointer to message
+ * @mbx: Pointer to mailbox information structure
+ *
+ * This function is a default handler for MAC/VLAN requests from the VF.
+ * The assumption is that in this case it is acceptable to just directly
+ * hand off the message from the VF to the underlying shared code.
+ **/
+s32 fm10k_iov_msg_mac_vlan_pf(struct fm10k_hw *hw, u32 **results,
+ struct fm10k_mbx_info *mbx)
+{
+ struct fm10k_vf_info *vf_info = (struct fm10k_vf_info *)mbx;
+ u8 mac[ETH_ALEN];
+ u32 *result;
+ int err = 0;
+ bool set;
+ u16 vlan;
+ u32 vid;
+
+ /* we shouldn't be updating rules on a disabled interface */
+ if (!FM10K_VF_FLAG_ENABLED(vf_info))
+ err = FM10K_ERR_PARAM;
+
+ if (!err && !!results[FM10K_MAC_VLAN_MSG_VLAN]) {
+ result = results[FM10K_MAC_VLAN_MSG_VLAN];
+
+ /* record VLAN id requested */
+ err = fm10k_tlv_attr_get_u32(result, &vid);
+ if (err)
+ return err;
+
+ set = !(vid & FM10K_VLAN_CLEAR);
+ vid &= ~FM10K_VLAN_CLEAR;
+
+ /* if the length field has been set, this is a multi-bit
+ * update request. For multi-bit requests, simply disallow
+ * them when the pf_vid has been set. In this case, the PF
+ * should have already cleared the VLAN_TABLE, and if we
+ * allowed them, it could allow a rogue VF to receive traffic
+ * on a VLAN it was not assigned. In the single-bit case, we
+ * need to modify requests for VLAN 0 to use the default PF or
+ * SW vid when assigned.
+ */
+
+ if (vid >> 16) {
+ /* prevent multi-bit requests when PF has
+ * administratively set the VLAN for this VF
+ */
+ if (vf_info->pf_vid)
+ return FM10K_ERR_PARAM;
+ } else {
+ err = fm10k_iov_select_vid(vf_info, (u16)vid);
+ if (err < 0)
+ return err;
+
+ vid = err;
+ }
+
+ /* update VSI info for VF in regards to VLAN table */
+ err = hw->mac.ops.update_vlan(hw, vid, vf_info->vsi, set);
+ }
+
+ if (!err && !!results[FM10K_MAC_VLAN_MSG_MAC]) {
+ result = results[FM10K_MAC_VLAN_MSG_MAC];
+
+ /* record unicast MAC address requested */
+ err = fm10k_tlv_attr_get_mac_vlan(result, mac, &vlan);
+ if (err)
+ return err;
+
+ /* block attempts to set MAC for a locked device */
+ if (is_valid_ether_addr(vf_info->mac) &&
+ !ether_addr_equal(mac, vf_info->mac))
+ return FM10K_ERR_PARAM;
+
+ set = !(vlan & FM10K_VLAN_CLEAR);
+ vlan &= ~FM10K_VLAN_CLEAR;
+
+ err = fm10k_iov_select_vid(vf_info, vlan);
+ if (err < 0)
+ return err;
+
+ vlan = (u16)err;
+
+ /* notify switch of request for new unicast address */
+ err = hw->mac.ops.update_uc_addr(hw, vf_info->glort,
+ mac, vlan, set, 0);
+ }
+
+ if (!err && !!results[FM10K_MAC_VLAN_MSG_MULTICAST]) {
+ result = results[FM10K_MAC_VLAN_MSG_MULTICAST];
+
+ /* record multicast MAC address requested */
+ err = fm10k_tlv_attr_get_mac_vlan(result, mac, &vlan);
+ if (err)
+ return err;
+
+ /* verify that the VF is allowed to request multicast */
+ if (!(vf_info->vf_flags & FM10K_VF_FLAG_MULTI_ENABLED))
+ return FM10K_ERR_PARAM;
+
+ set = !(vlan & FM10K_VLAN_CLEAR);
+ vlan &= ~FM10K_VLAN_CLEAR;
+
+ err = fm10k_iov_select_vid(vf_info, vlan);
+ if (err < 0)
+ return err;
+
+ vlan = (u16)err;
+
+ /* notify switch of request for new multicast address */
+ err = hw->mac.ops.update_mc_addr(hw, vf_info->glort,
+ mac, vlan, set);
+ }
+
+ return err;
+}
+
+/**
+ * fm10k_iov_supported_xcast_mode_pf - Determine best match for xcast mode
+ * @vf_info: VF info structure containing capability flags
+ * @mode: Requested xcast mode
+ *
+ * This function outputs the mode that most closely matches the requested
+ * mode. If not modes match it will request we disable the port
+ **/
+static u8 fm10k_iov_supported_xcast_mode_pf(struct fm10k_vf_info *vf_info,
+ u8 mode)
+{
+ u8 vf_flags = vf_info->vf_flags;
+
+ /* match up mode to capabilities as best as possible */
+ switch (mode) {
+ case FM10K_XCAST_MODE_PROMISC:
+ if (vf_flags & FM10K_VF_FLAG_PROMISC_CAPABLE)
+ return FM10K_XCAST_MODE_PROMISC;
+ fallthrough;
+ case FM10K_XCAST_MODE_ALLMULTI:
+ if (vf_flags & FM10K_VF_FLAG_ALLMULTI_CAPABLE)
+ return FM10K_XCAST_MODE_ALLMULTI;
+ fallthrough;
+ case FM10K_XCAST_MODE_MULTI:
+ if (vf_flags & FM10K_VF_FLAG_MULTI_CAPABLE)
+ return FM10K_XCAST_MODE_MULTI;
+ fallthrough;
+ case FM10K_XCAST_MODE_NONE:
+ if (vf_flags & FM10K_VF_FLAG_NONE_CAPABLE)
+ return FM10K_XCAST_MODE_NONE;
+ fallthrough;
+ default:
+ break;
+ }
+
+ /* disable interface as it should not be able to request any */
+ return FM10K_XCAST_MODE_DISABLE;
+}
+
+/**
+ * fm10k_iov_msg_lport_state_pf - Message handler for port state requests
+ * @hw: Pointer to hardware structure
+ * @results: Pointer array to message, results[0] is pointer to message
+ * @mbx: Pointer to mailbox information structure
+ *
+ * This function is a default handler for port state requests. The port
+ * state requests for now are basic and consist of enabling or disabling
+ * the port.
+ **/
+s32 fm10k_iov_msg_lport_state_pf(struct fm10k_hw *hw, u32 **results,
+ struct fm10k_mbx_info *mbx)
+{
+ struct fm10k_vf_info *vf_info = (struct fm10k_vf_info *)mbx;
+ s32 err = 0;
+ u32 msg[2];
+ u8 mode = 0;
+
+ /* verify VF is allowed to enable even minimal mode */
+ if (!(vf_info->vf_flags & FM10K_VF_FLAG_NONE_CAPABLE))
+ return FM10K_ERR_PARAM;
+
+ if (!!results[FM10K_LPORT_STATE_MSG_XCAST_MODE]) {
+ u32 *result = results[FM10K_LPORT_STATE_MSG_XCAST_MODE];
+
+ /* XCAST mode update requested */
+ err = fm10k_tlv_attr_get_u8(result, &mode);
+ if (err)
+ return FM10K_ERR_PARAM;
+
+ /* prep for possible demotion depending on capabilities */
+ mode = fm10k_iov_supported_xcast_mode_pf(vf_info, mode);
+
+ /* if mode is not currently enabled, enable it */
+ if (!(FM10K_VF_FLAG_ENABLED(vf_info) & BIT(mode)))
+ fm10k_update_xcast_mode_pf(hw, vf_info->glort, mode);
+
+ /* swap mode back to a bit flag */
+ mode = FM10K_VF_FLAG_SET_MODE(mode);
+ } else if (!results[FM10K_LPORT_STATE_MSG_DISABLE]) {
+ /* need to disable the port if it is already enabled */
+ if (FM10K_VF_FLAG_ENABLED(vf_info))
+ err = fm10k_update_lport_state_pf(hw, vf_info->glort,
+ 1, false);
+
+ /* we need to clear VF_FLAG_ENABLED flags in order to ensure
+ * that we actually re-enable the LPORT state below. Note that
+ * this has no impact if the VF is already disabled, as the
+ * flags are already cleared.
+ */
+ if (!err)
+ vf_info->vf_flags = FM10K_VF_FLAG_CAPABLE(vf_info);
+
+ /* when enabling the port we should reset the rate limiters */
+ hw->iov.ops.configure_tc(hw, vf_info->vf_idx, vf_info->rate);
+
+ /* set mode for minimal functionality */
+ mode = FM10K_VF_FLAG_SET_MODE_NONE;
+
+ /* generate port state response to notify VF it is ready */
+ fm10k_tlv_msg_init(msg, FM10K_VF_MSG_ID_LPORT_STATE);
+ fm10k_tlv_attr_put_bool(msg, FM10K_LPORT_STATE_MSG_READY);
+ mbx->ops.enqueue_tx(hw, mbx, msg);
+ }
+
+ /* if enable state toggled note the update */
+ if (!err && (!FM10K_VF_FLAG_ENABLED(vf_info) != !mode))
+ err = fm10k_update_lport_state_pf(hw, vf_info->glort, 1,
+ !!mode);
+
+ /* if state change succeeded, then update our stored state */
+ mode |= FM10K_VF_FLAG_CAPABLE(vf_info);
+ if (!err)
+ vf_info->vf_flags = mode;
+
+ return err;
+}
+
+/**
+ * fm10k_update_hw_stats_pf - Updates hardware related statistics of PF
+ * @hw: pointer to hardware structure
+ * @stats: pointer to the stats structure to update
+ *
+ * This function collects and aggregates global and per queue hardware
+ * statistics.
+ **/
+static void fm10k_update_hw_stats_pf(struct fm10k_hw *hw,
+ struct fm10k_hw_stats *stats)
+{
+ u32 timeout, ur, ca, um, xec, vlan_drop, loopback_drop, nodesc_drop;
+ u32 id, id_prev;
+
+ /* Use Tx queue 0 as a canary to detect a reset */
+ id = fm10k_read_reg(hw, FM10K_TXQCTL(0));
+
+ /* Read Global Statistics */
+ do {
+ timeout = fm10k_read_hw_stats_32b(hw, FM10K_STATS_TIMEOUT,
+ &stats->timeout);
+ ur = fm10k_read_hw_stats_32b(hw, FM10K_STATS_UR, &stats->ur);
+ ca = fm10k_read_hw_stats_32b(hw, FM10K_STATS_CA, &stats->ca);
+ um = fm10k_read_hw_stats_32b(hw, FM10K_STATS_UM, &stats->um);
+ xec = fm10k_read_hw_stats_32b(hw, FM10K_STATS_XEC, &stats->xec);
+ vlan_drop = fm10k_read_hw_stats_32b(hw, FM10K_STATS_VLAN_DROP,
+ &stats->vlan_drop);
+ loopback_drop =
+ fm10k_read_hw_stats_32b(hw,
+ FM10K_STATS_LOOPBACK_DROP,
+ &stats->loopback_drop);
+ nodesc_drop = fm10k_read_hw_stats_32b(hw,
+ FM10K_STATS_NODESC_DROP,
+ &stats->nodesc_drop);
+
+ /* if value has not changed then we have consistent data */
+ id_prev = id;
+ id = fm10k_read_reg(hw, FM10K_TXQCTL(0));
+ } while ((id ^ id_prev) & FM10K_TXQCTL_ID_MASK);
+
+ /* drop non-ID bits and set VALID ID bit */
+ id &= FM10K_TXQCTL_ID_MASK;
+ id |= FM10K_STAT_VALID;
+
+ /* Update Global Statistics */
+ if (stats->stats_idx == id) {
+ stats->timeout.count += timeout;
+ stats->ur.count += ur;
+ stats->ca.count += ca;
+ stats->um.count += um;
+ stats->xec.count += xec;
+ stats->vlan_drop.count += vlan_drop;
+ stats->loopback_drop.count += loopback_drop;
+ stats->nodesc_drop.count += nodesc_drop;
+ }
+
+ /* Update bases and record current PF id */
+ fm10k_update_hw_base_32b(&stats->timeout, timeout);
+ fm10k_update_hw_base_32b(&stats->ur, ur);
+ fm10k_update_hw_base_32b(&stats->ca, ca);
+ fm10k_update_hw_base_32b(&stats->um, um);
+ fm10k_update_hw_base_32b(&stats->xec, xec);
+ fm10k_update_hw_base_32b(&stats->vlan_drop, vlan_drop);
+ fm10k_update_hw_base_32b(&stats->loopback_drop, loopback_drop);
+ fm10k_update_hw_base_32b(&stats->nodesc_drop, nodesc_drop);
+ stats->stats_idx = id;
+
+ /* Update Queue Statistics */
+ fm10k_update_hw_stats_q(hw, stats->q, 0, hw->mac.max_queues);
+}
+
+/**
+ * fm10k_rebind_hw_stats_pf - Resets base for hardware statistics of PF
+ * @hw: pointer to hardware structure
+ * @stats: pointer to the stats structure to update
+ *
+ * This function resets the base for global and per queue hardware
+ * statistics.
+ **/
+static void fm10k_rebind_hw_stats_pf(struct fm10k_hw *hw,
+ struct fm10k_hw_stats *stats)
+{
+ /* Unbind Global Statistics */
+ fm10k_unbind_hw_stats_32b(&stats->timeout);
+ fm10k_unbind_hw_stats_32b(&stats->ur);
+ fm10k_unbind_hw_stats_32b(&stats->ca);
+ fm10k_unbind_hw_stats_32b(&stats->um);
+ fm10k_unbind_hw_stats_32b(&stats->xec);
+ fm10k_unbind_hw_stats_32b(&stats->vlan_drop);
+ fm10k_unbind_hw_stats_32b(&stats->loopback_drop);
+ fm10k_unbind_hw_stats_32b(&stats->nodesc_drop);
+
+ /* Unbind Queue Statistics */
+ fm10k_unbind_hw_stats_q(stats->q, 0, hw->mac.max_queues);
+
+ /* Reinitialize bases for all stats */
+ fm10k_update_hw_stats_pf(hw, stats);
+}
+
+/**
+ * fm10k_set_dma_mask_pf - Configures PhyAddrSpace to limit DMA to system
+ * @hw: pointer to hardware structure
+ * @dma_mask: 64 bit DMA mask required for platform
+ *
+ * This function sets the PHYADDR.PhyAddrSpace bits for the endpoint in order
+ * to limit the access to memory beyond what is physically in the system.
+ **/
+static void fm10k_set_dma_mask_pf(struct fm10k_hw *hw, u64 dma_mask)
+{
+ /* we need to write the upper 32 bits of DMA mask to PhyAddrSpace */
+ u32 phyaddr = (u32)(dma_mask >> 32);
+
+ fm10k_write_reg(hw, FM10K_PHYADDR, phyaddr);
+}
+
+/**
+ * fm10k_get_fault_pf - Record a fault in one of the interface units
+ * @hw: pointer to hardware structure
+ * @type: pointer to fault type register offset
+ * @fault: pointer to memory location to record the fault
+ *
+ * Record the fault register contents to the fault data structure and
+ * clear the entry from the register.
+ *
+ * Returns ERR_PARAM if invalid register is specified or no error is present.
+ **/
+static s32 fm10k_get_fault_pf(struct fm10k_hw *hw, int type,
+ struct fm10k_fault *fault)
+{
+ u32 func;
+
+ /* verify the fault register is in range and is aligned */
+ switch (type) {
+ case FM10K_PCA_FAULT:
+ case FM10K_THI_FAULT:
+ case FM10K_FUM_FAULT:
+ break;
+ default:
+ return FM10K_ERR_PARAM;
+ }
+
+ /* only service faults that are valid */
+ func = fm10k_read_reg(hw, type + FM10K_FAULT_FUNC);
+ if (!(func & FM10K_FAULT_FUNC_VALID))
+ return FM10K_ERR_PARAM;
+
+ /* read remaining fields */
+ fault->address = fm10k_read_reg(hw, type + FM10K_FAULT_ADDR_HI);
+ fault->address <<= 32;
+ fault->address |= fm10k_read_reg(hw, type + FM10K_FAULT_ADDR_LO);
+ fault->specinfo = fm10k_read_reg(hw, type + FM10K_FAULT_SPECINFO);
+
+ /* clear valid bit to allow for next error */
+ fm10k_write_reg(hw, type + FM10K_FAULT_FUNC, FM10K_FAULT_FUNC_VALID);
+
+ /* Record which function triggered the error */
+ if (func & FM10K_FAULT_FUNC_PF)
+ fault->func = 0;
+ else
+ fault->func = 1 + ((func & FM10K_FAULT_FUNC_VF_MASK) >>
+ FM10K_FAULT_FUNC_VF_SHIFT);
+
+ /* record fault type */
+ fault->type = func & FM10K_FAULT_FUNC_TYPE_MASK;
+
+ return 0;
+}
+
+/**
+ * fm10k_request_lport_map_pf - Request LPORT map from the switch API
+ * @hw: pointer to hardware structure
+ *
+ **/
+static s32 fm10k_request_lport_map_pf(struct fm10k_hw *hw)
+{
+ struct fm10k_mbx_info *mbx = &hw->mbx;
+ u32 msg[1];
+
+ /* issue request asking for LPORT map */
+ fm10k_tlv_msg_init(msg, FM10K_PF_MSG_ID_LPORT_MAP);
+
+ /* load onto outgoing mailbox */
+ return mbx->ops.enqueue_tx(hw, mbx, msg);
+}
+
+/**
+ * fm10k_get_host_state_pf - Returns the state of the switch and mailbox
+ * @hw: pointer to hardware structure
+ * @switch_ready: pointer to boolean value that will record switch state
+ *
+ * This function will check the DMA_CTRL2 register and mailbox in order
+ * to determine if the switch is ready for the PF to begin requesting
+ * addresses and mapping traffic to the local interface.
+ **/
+static s32 fm10k_get_host_state_pf(struct fm10k_hw *hw, bool *switch_ready)
+{
+ u32 dma_ctrl2;
+
+ /* verify the switch is ready for interaction */
+ dma_ctrl2 = fm10k_read_reg(hw, FM10K_DMA_CTRL2);
+ if (!(dma_ctrl2 & FM10K_DMA_CTRL2_SWITCH_READY))
+ return 0;
+
+ /* retrieve generic host state info */
+ return fm10k_get_host_state_generic(hw, switch_ready);
+}
+
+/* This structure defines the attibutes to be parsed below */
+const struct fm10k_tlv_attr fm10k_lport_map_msg_attr[] = {
+ FM10K_TLV_ATTR_LE_STRUCT(FM10K_PF_ATTR_ID_ERR,
+ sizeof(struct fm10k_swapi_error)),
+ FM10K_TLV_ATTR_U32(FM10K_PF_ATTR_ID_LPORT_MAP),
+ FM10K_TLV_ATTR_LAST
+};
+
+/**
+ * fm10k_msg_lport_map_pf - Message handler for lport_map message from SM
+ * @hw: Pointer to hardware structure
+ * @results: pointer array containing parsed data
+ * @mbx: Pointer to mailbox information structure
+ *
+ * This handler configures the lport mapping based on the reply from the
+ * switch API.
+ **/
+s32 fm10k_msg_lport_map_pf(struct fm10k_hw *hw, u32 **results,
+ struct fm10k_mbx_info __always_unused *mbx)
+{
+ u16 glort, mask;
+ u32 dglort_map;
+ s32 err;
+
+ err = fm10k_tlv_attr_get_u32(results[FM10K_PF_ATTR_ID_LPORT_MAP],
+ &dglort_map);
+ if (err)
+ return err;
+
+ /* extract values out of the header */
+ glort = FM10K_MSG_HDR_FIELD_GET(dglort_map, LPORT_MAP_GLORT);
+ mask = FM10K_MSG_HDR_FIELD_GET(dglort_map, LPORT_MAP_MASK);
+
+ /* verify mask is set and none of the masked bits in glort are set */
+ if (!mask || (glort & ~mask))
+ return FM10K_ERR_PARAM;
+
+ /* verify the mask is contiguous, and that it is 1's followed by 0's */
+ if (((~(mask - 1) & mask) + mask) & FM10K_DGLORTMAP_NONE)
+ return FM10K_ERR_PARAM;
+
+ /* record the glort, mask, and port count */
+ hw->mac.dglort_map = dglort_map;
+
+ return 0;
+}
+
+const struct fm10k_tlv_attr fm10k_update_pvid_msg_attr[] = {
+ FM10K_TLV_ATTR_U32(FM10K_PF_ATTR_ID_UPDATE_PVID),
+ FM10K_TLV_ATTR_LAST
+};
+
+/**
+ * fm10k_msg_update_pvid_pf - Message handler for port VLAN message from SM
+ * @hw: Pointer to hardware structure
+ * @results: pointer array containing parsed data
+ * @mbx: Pointer to mailbox information structure
+ *
+ * This handler configures the default VLAN for the PF
+ **/
+static s32 fm10k_msg_update_pvid_pf(struct fm10k_hw *hw, u32 **results,
+ struct fm10k_mbx_info __always_unused *mbx)
+{
+ u16 glort, pvid;
+ u32 pvid_update;
+ s32 err;
+
+ err = fm10k_tlv_attr_get_u32(results[FM10K_PF_ATTR_ID_UPDATE_PVID],
+ &pvid_update);
+ if (err)
+ return err;
+
+ /* extract values from the pvid update */
+ glort = FM10K_MSG_HDR_FIELD_GET(pvid_update, UPDATE_PVID_GLORT);
+ pvid = FM10K_MSG_HDR_FIELD_GET(pvid_update, UPDATE_PVID_PVID);
+
+ /* if glort is not valid return error */
+ if (!fm10k_glort_valid_pf(hw, glort))
+ return FM10K_ERR_PARAM;
+
+ /* verify VLAN ID is valid */
+ if (pvid >= FM10K_VLAN_TABLE_VID_MAX)
+ return FM10K_ERR_PARAM;
+
+ /* record the port VLAN ID value */
+ hw->mac.default_vid = pvid;
+
+ return 0;
+}
+
+/**
+ * fm10k_record_global_table_data - Move global table data to swapi table info
+ * @from: pointer to source table data structure
+ * @to: pointer to destination table info structure
+ *
+ * This function is will copy table_data to the table_info contained in
+ * the hw struct.
+ **/
+static void fm10k_record_global_table_data(struct fm10k_global_table_data *from,
+ struct fm10k_swapi_table_info *to)
+{
+ /* convert from le32 struct to CPU byte ordered values */
+ to->used = le32_to_cpu(from->used);
+ to->avail = le32_to_cpu(from->avail);
+}
+
+const struct fm10k_tlv_attr fm10k_err_msg_attr[] = {
+ FM10K_TLV_ATTR_LE_STRUCT(FM10K_PF_ATTR_ID_ERR,
+ sizeof(struct fm10k_swapi_error)),
+ FM10K_TLV_ATTR_LAST
+};
+
+/**
+ * fm10k_msg_err_pf - Message handler for error reply
+ * @hw: Pointer to hardware structure
+ * @results: pointer array containing parsed data
+ * @mbx: Pointer to mailbox information structure
+ *
+ * This handler will capture the data for any error replies to previous
+ * messages that the PF has sent.
+ **/
+s32 fm10k_msg_err_pf(struct fm10k_hw *hw, u32 **results,
+ struct fm10k_mbx_info __always_unused *mbx)
+{
+ struct fm10k_swapi_error err_msg;
+ s32 err;
+
+ /* extract structure from message */
+ err = fm10k_tlv_attr_get_le_struct(results[FM10K_PF_ATTR_ID_ERR],
+ &err_msg, sizeof(err_msg));
+ if (err)
+ return err;
+
+ /* record table status */
+ fm10k_record_global_table_data(&err_msg.mac, &hw->swapi.mac);
+ fm10k_record_global_table_data(&err_msg.nexthop, &hw->swapi.nexthop);
+ fm10k_record_global_table_data(&err_msg.ffu, &hw->swapi.ffu);
+
+ /* record SW API status value */
+ hw->swapi.status = le32_to_cpu(err_msg.status);
+
+ return 0;
+}
+
+static const struct fm10k_msg_data fm10k_msg_data_pf[] = {
+ FM10K_PF_MSG_ERR_HANDLER(XCAST_MODES, fm10k_msg_err_pf),
+ FM10K_PF_MSG_ERR_HANDLER(UPDATE_MAC_FWD_RULE, fm10k_msg_err_pf),
+ FM10K_PF_MSG_LPORT_MAP_HANDLER(fm10k_msg_lport_map_pf),
+ FM10K_PF_MSG_ERR_HANDLER(LPORT_CREATE, fm10k_msg_err_pf),
+ FM10K_PF_MSG_ERR_HANDLER(LPORT_DELETE, fm10k_msg_err_pf),
+ FM10K_PF_MSG_UPDATE_PVID_HANDLER(fm10k_msg_update_pvid_pf),
+ FM10K_TLV_MSG_ERROR_HANDLER(fm10k_tlv_msg_error),
+};
+
+static const struct fm10k_mac_ops mac_ops_pf = {
+ .get_bus_info = fm10k_get_bus_info_generic,
+ .reset_hw = fm10k_reset_hw_pf,
+ .init_hw = fm10k_init_hw_pf,
+ .start_hw = fm10k_start_hw_generic,
+ .stop_hw = fm10k_stop_hw_generic,
+ .update_vlan = fm10k_update_vlan_pf,
+ .read_mac_addr = fm10k_read_mac_addr_pf,
+ .update_uc_addr = fm10k_update_uc_addr_pf,
+ .update_mc_addr = fm10k_update_mc_addr_pf,
+ .update_xcast_mode = fm10k_update_xcast_mode_pf,
+ .update_int_moderator = fm10k_update_int_moderator_pf,
+ .update_lport_state = fm10k_update_lport_state_pf,
+ .update_hw_stats = fm10k_update_hw_stats_pf,
+ .rebind_hw_stats = fm10k_rebind_hw_stats_pf,
+ .configure_dglort_map = fm10k_configure_dglort_map_pf,
+ .set_dma_mask = fm10k_set_dma_mask_pf,
+ .get_fault = fm10k_get_fault_pf,
+ .get_host_state = fm10k_get_host_state_pf,
+ .request_lport_map = fm10k_request_lport_map_pf,
+};
+
+static const struct fm10k_iov_ops iov_ops_pf = {
+ .assign_resources = fm10k_iov_assign_resources_pf,
+ .configure_tc = fm10k_iov_configure_tc_pf,
+ .assign_int_moderator = fm10k_iov_assign_int_moderator_pf,
+ .assign_default_mac_vlan = fm10k_iov_assign_default_mac_vlan_pf,
+ .reset_resources = fm10k_iov_reset_resources_pf,
+ .set_lport = fm10k_iov_set_lport_pf,
+ .reset_lport = fm10k_iov_reset_lport_pf,
+ .update_stats = fm10k_iov_update_stats_pf,
+};
+
+static s32 fm10k_get_invariants_pf(struct fm10k_hw *hw)
+{
+ fm10k_get_invariants_generic(hw);
+
+ return fm10k_sm_mbx_init(hw, &hw->mbx, fm10k_msg_data_pf);
+}
+
+const struct fm10k_info fm10k_pf_info = {
+ .mac = fm10k_mac_pf,
+ .get_invariants = fm10k_get_invariants_pf,
+ .mac_ops = &mac_ops_pf,
+ .iov_ops = &iov_ops_pf,
+};