diff options
Diffstat (limited to 'drivers/net/ethernet/intel/i40e/i40e_txrx.c')
| -rw-r--r-- | drivers/net/ethernet/intel/i40e/i40e_txrx.c | 4058 |
1 files changed, 4058 insertions, 0 deletions
diff --git a/drivers/net/ethernet/intel/i40e/i40e_txrx.c b/drivers/net/ethernet/intel/i40e/i40e_txrx.c new file mode 100644 index 000000000..1df2f9338 --- /dev/null +++ b/drivers/net/ethernet/intel/i40e/i40e_txrx.c @@ -0,0 +1,4058 @@ +// SPDX-License-Identifier: GPL-2.0 +/* Copyright(c) 2013 - 2018 Intel Corporation. */ + +#include <linux/prefetch.h> +#include <linux/bpf_trace.h> +#include <net/mpls.h> +#include <net/xdp.h> +#include "i40e.h" +#include "i40e_trace.h" +#include "i40e_prototype.h" +#include "i40e_txrx_common.h" +#include "i40e_xsk.h" + +#define I40E_TXD_CMD (I40E_TX_DESC_CMD_EOP | I40E_TX_DESC_CMD_RS) +/** + * i40e_fdir - Generate a Flow Director descriptor based on fdata + * @tx_ring: Tx ring to send buffer on + * @fdata: Flow director filter data + * @add: Indicate if we are adding a rule or deleting one + * + **/ +static void i40e_fdir(struct i40e_ring *tx_ring, + struct i40e_fdir_filter *fdata, bool add) +{ + struct i40e_filter_program_desc *fdir_desc; + struct i40e_pf *pf = tx_ring->vsi->back; + u32 flex_ptype, dtype_cmd; + u16 i; + + /* grab the next descriptor */ + i = tx_ring->next_to_use; + fdir_desc = I40E_TX_FDIRDESC(tx_ring, i); + + i++; + tx_ring->next_to_use = (i < tx_ring->count) ? i : 0; + + flex_ptype = I40E_TXD_FLTR_QW0_QINDEX_MASK & + (fdata->q_index << I40E_TXD_FLTR_QW0_QINDEX_SHIFT); + + flex_ptype |= I40E_TXD_FLTR_QW0_FLEXOFF_MASK & + (fdata->flex_off << I40E_TXD_FLTR_QW0_FLEXOFF_SHIFT); + + flex_ptype |= I40E_TXD_FLTR_QW0_PCTYPE_MASK & + (fdata->pctype << I40E_TXD_FLTR_QW0_PCTYPE_SHIFT); + + /* Use LAN VSI Id if not programmed by user */ + flex_ptype |= I40E_TXD_FLTR_QW0_DEST_VSI_MASK & + ((u32)(fdata->dest_vsi ? : pf->vsi[pf->lan_vsi]->id) << + I40E_TXD_FLTR_QW0_DEST_VSI_SHIFT); + + dtype_cmd = I40E_TX_DESC_DTYPE_FILTER_PROG; + + dtype_cmd |= add ? + I40E_FILTER_PROGRAM_DESC_PCMD_ADD_UPDATE << + I40E_TXD_FLTR_QW1_PCMD_SHIFT : + I40E_FILTER_PROGRAM_DESC_PCMD_REMOVE << + I40E_TXD_FLTR_QW1_PCMD_SHIFT; + + dtype_cmd |= I40E_TXD_FLTR_QW1_DEST_MASK & + (fdata->dest_ctl << I40E_TXD_FLTR_QW1_DEST_SHIFT); + + dtype_cmd |= I40E_TXD_FLTR_QW1_FD_STATUS_MASK & + (fdata->fd_status << I40E_TXD_FLTR_QW1_FD_STATUS_SHIFT); + + if (fdata->cnt_index) { + dtype_cmd |= I40E_TXD_FLTR_QW1_CNT_ENA_MASK; + dtype_cmd |= I40E_TXD_FLTR_QW1_CNTINDEX_MASK & + ((u32)fdata->cnt_index << + I40E_TXD_FLTR_QW1_CNTINDEX_SHIFT); + } + + fdir_desc->qindex_flex_ptype_vsi = cpu_to_le32(flex_ptype); + fdir_desc->rsvd = cpu_to_le32(0); + fdir_desc->dtype_cmd_cntindex = cpu_to_le32(dtype_cmd); + fdir_desc->fd_id = cpu_to_le32(fdata->fd_id); +} + +#define I40E_FD_CLEAN_DELAY 10 +/** + * i40e_program_fdir_filter - Program a Flow Director filter + * @fdir_data: Packet data that will be filter parameters + * @raw_packet: the pre-allocated packet buffer for FDir + * @pf: The PF pointer + * @add: True for add/update, False for remove + **/ +static int i40e_program_fdir_filter(struct i40e_fdir_filter *fdir_data, + u8 *raw_packet, struct i40e_pf *pf, + bool add) +{ + struct i40e_tx_buffer *tx_buf, *first; + struct i40e_tx_desc *tx_desc; + struct i40e_ring *tx_ring; + struct i40e_vsi *vsi; + struct device *dev; + dma_addr_t dma; + u32 td_cmd = 0; + u16 i; + + /* find existing FDIR VSI */ + vsi = i40e_find_vsi_by_type(pf, I40E_VSI_FDIR); + if (!vsi) + return -ENOENT; + + tx_ring = vsi->tx_rings[0]; + dev = tx_ring->dev; + + /* we need two descriptors to add/del a filter and we can wait */ + for (i = I40E_FD_CLEAN_DELAY; I40E_DESC_UNUSED(tx_ring) < 2; i--) { + if (!i) + return -EAGAIN; + msleep_interruptible(1); + } + + dma = dma_map_single(dev, raw_packet, + I40E_FDIR_MAX_RAW_PACKET_SIZE, DMA_TO_DEVICE); + if (dma_mapping_error(dev, dma)) + goto dma_fail; + + /* grab the next descriptor */ + i = tx_ring->next_to_use; + first = &tx_ring->tx_bi[i]; + i40e_fdir(tx_ring, fdir_data, add); + + /* Now program a dummy descriptor */ + i = tx_ring->next_to_use; + tx_desc = I40E_TX_DESC(tx_ring, i); + tx_buf = &tx_ring->tx_bi[i]; + + tx_ring->next_to_use = ((i + 1) < tx_ring->count) ? i + 1 : 0; + + memset(tx_buf, 0, sizeof(struct i40e_tx_buffer)); + + /* record length, and DMA address */ + dma_unmap_len_set(tx_buf, len, I40E_FDIR_MAX_RAW_PACKET_SIZE); + dma_unmap_addr_set(tx_buf, dma, dma); + + tx_desc->buffer_addr = cpu_to_le64(dma); + td_cmd = I40E_TXD_CMD | I40E_TX_DESC_CMD_DUMMY; + + tx_buf->tx_flags = I40E_TX_FLAGS_FD_SB; + tx_buf->raw_buf = (void *)raw_packet; + + tx_desc->cmd_type_offset_bsz = + build_ctob(td_cmd, 0, I40E_FDIR_MAX_RAW_PACKET_SIZE, 0); + + /* Force memory writes to complete before letting h/w + * know there are new descriptors to fetch. + */ + wmb(); + + /* Mark the data descriptor to be watched */ + first->next_to_watch = tx_desc; + + writel(tx_ring->next_to_use, tx_ring->tail); + return 0; + +dma_fail: + return -1; +} + +/** + * i40e_create_dummy_packet - Constructs dummy packet for HW + * @dummy_packet: preallocated space for dummy packet + * @ipv4: is layer 3 packet of version 4 or 6 + * @l4proto: next level protocol used in data portion of l3 + * @data: filter data + * + * Returns address of layer 4 protocol dummy packet. + **/ +static char *i40e_create_dummy_packet(u8 *dummy_packet, bool ipv4, u8 l4proto, + struct i40e_fdir_filter *data) +{ + bool is_vlan = !!data->vlan_tag; + struct vlan_hdr vlan = {}; + struct ipv6hdr ipv6 = {}; + struct ethhdr eth = {}; + struct iphdr ip = {}; + u8 *tmp; + + if (ipv4) { + eth.h_proto = cpu_to_be16(ETH_P_IP); + ip.protocol = l4proto; + ip.version = 0x4; + ip.ihl = 0x5; + + ip.daddr = data->dst_ip; + ip.saddr = data->src_ip; + } else { + eth.h_proto = cpu_to_be16(ETH_P_IPV6); + ipv6.nexthdr = l4proto; + ipv6.version = 0x6; + + memcpy(&ipv6.saddr.in6_u.u6_addr32, data->src_ip6, + sizeof(__be32) * 4); + memcpy(&ipv6.daddr.in6_u.u6_addr32, data->dst_ip6, + sizeof(__be32) * 4); + } + + if (is_vlan) { + vlan.h_vlan_TCI = data->vlan_tag; + vlan.h_vlan_encapsulated_proto = eth.h_proto; + eth.h_proto = data->vlan_etype; + } + + tmp = dummy_packet; + memcpy(tmp, ð, sizeof(eth)); + tmp += sizeof(eth); + + if (is_vlan) { + memcpy(tmp, &vlan, sizeof(vlan)); + tmp += sizeof(vlan); + } + + if (ipv4) { + memcpy(tmp, &ip, sizeof(ip)); + tmp += sizeof(ip); + } else { + memcpy(tmp, &ipv6, sizeof(ipv6)); + tmp += sizeof(ipv6); + } + + return tmp; +} + +/** + * i40e_create_dummy_udp_packet - helper function to create UDP packet + * @raw_packet: preallocated space for dummy packet + * @ipv4: is layer 3 packet of version 4 or 6 + * @l4proto: next level protocol used in data portion of l3 + * @data: filter data + * + * Helper function to populate udp fields. + **/ +static void i40e_create_dummy_udp_packet(u8 *raw_packet, bool ipv4, u8 l4proto, + struct i40e_fdir_filter *data) +{ + struct udphdr *udp; + u8 *tmp; + + tmp = i40e_create_dummy_packet(raw_packet, ipv4, IPPROTO_UDP, data); + udp = (struct udphdr *)(tmp); + udp->dest = data->dst_port; + udp->source = data->src_port; +} + +/** + * i40e_create_dummy_tcp_packet - helper function to create TCP packet + * @raw_packet: preallocated space for dummy packet + * @ipv4: is layer 3 packet of version 4 or 6 + * @l4proto: next level protocol used in data portion of l3 + * @data: filter data + * + * Helper function to populate tcp fields. + **/ +static void i40e_create_dummy_tcp_packet(u8 *raw_packet, bool ipv4, u8 l4proto, + struct i40e_fdir_filter *data) +{ + struct tcphdr *tcp; + u8 *tmp; + /* Dummy tcp packet */ + static const char tcp_packet[] = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0x50, 0x11, 0x0, 0x72, 0, 0, 0, 0}; + + tmp = i40e_create_dummy_packet(raw_packet, ipv4, IPPROTO_TCP, data); + + tcp = (struct tcphdr *)tmp; + memcpy(tcp, tcp_packet, sizeof(tcp_packet)); + tcp->dest = data->dst_port; + tcp->source = data->src_port; +} + +/** + * i40e_create_dummy_sctp_packet - helper function to create SCTP packet + * @raw_packet: preallocated space for dummy packet + * @ipv4: is layer 3 packet of version 4 or 6 + * @l4proto: next level protocol used in data portion of l3 + * @data: filter data + * + * Helper function to populate sctp fields. + **/ +static void i40e_create_dummy_sctp_packet(u8 *raw_packet, bool ipv4, + u8 l4proto, + struct i40e_fdir_filter *data) +{ + struct sctphdr *sctp; + u8 *tmp; + + tmp = i40e_create_dummy_packet(raw_packet, ipv4, IPPROTO_SCTP, data); + + sctp = (struct sctphdr *)tmp; + sctp->dest = data->dst_port; + sctp->source = data->src_port; +} + +/** + * i40e_prepare_fdir_filter - Prepare and program fdir filter + * @pf: physical function to attach filter to + * @fd_data: filter data + * @add: add or delete filter + * @packet_addr: address of dummy packet, used in filtering + * @payload_offset: offset from dummy packet address to user defined data + * @pctype: Packet type for which filter is used + * + * Helper function to offset data of dummy packet, program it and + * handle errors. + **/ +static int i40e_prepare_fdir_filter(struct i40e_pf *pf, + struct i40e_fdir_filter *fd_data, + bool add, char *packet_addr, + int payload_offset, u8 pctype) +{ + int ret; + + if (fd_data->flex_filter) { + u8 *payload; + __be16 pattern = fd_data->flex_word; + u16 off = fd_data->flex_offset; + + payload = packet_addr + payload_offset; + + /* If user provided vlan, offset payload by vlan header length */ + if (!!fd_data->vlan_tag) + payload += VLAN_HLEN; + + *((__force __be16 *)(payload + off)) = pattern; + } + + fd_data->pctype = pctype; + ret = i40e_program_fdir_filter(fd_data, packet_addr, pf, add); + if (ret) { + dev_info(&pf->pdev->dev, + "PCTYPE:%d, Filter command send failed for fd_id:%d (ret = %d)\n", + fd_data->pctype, fd_data->fd_id, ret); + /* Free the packet buffer since it wasn't added to the ring */ + return -EOPNOTSUPP; + } else if (I40E_DEBUG_FD & pf->hw.debug_mask) { + if (add) + dev_info(&pf->pdev->dev, + "Filter OK for PCTYPE %d loc = %d\n", + fd_data->pctype, fd_data->fd_id); + else + dev_info(&pf->pdev->dev, + "Filter deleted for PCTYPE %d loc = %d\n", + fd_data->pctype, fd_data->fd_id); + } + + return ret; +} + +/** + * i40e_change_filter_num - Prepare and program fdir filter + * @ipv4: is layer 3 packet of version 4 or 6 + * @add: add or delete filter + * @ipv4_filter_num: field to update + * @ipv6_filter_num: field to update + * + * Update filter number field for pf. + **/ +static void i40e_change_filter_num(bool ipv4, bool add, u16 *ipv4_filter_num, + u16 *ipv6_filter_num) +{ + if (add) { + if (ipv4) + (*ipv4_filter_num)++; + else + (*ipv6_filter_num)++; + } else { + if (ipv4) + (*ipv4_filter_num)--; + else + (*ipv6_filter_num)--; + } +} + +#define I40E_UDPIP_DUMMY_PACKET_LEN 42 +#define I40E_UDPIP6_DUMMY_PACKET_LEN 62 +/** + * i40e_add_del_fdir_udp - Add/Remove UDP filters + * @vsi: pointer to the targeted VSI + * @fd_data: the flow director data required for the FDir descriptor + * @add: true adds a filter, false removes it + * @ipv4: true is v4, false is v6 + * + * Returns 0 if the filters were successfully added or removed + **/ +static int i40e_add_del_fdir_udp(struct i40e_vsi *vsi, + struct i40e_fdir_filter *fd_data, + bool add, + bool ipv4) +{ + struct i40e_pf *pf = vsi->back; + u8 *raw_packet; + int ret; + + raw_packet = kzalloc(I40E_FDIR_MAX_RAW_PACKET_SIZE, GFP_KERNEL); + if (!raw_packet) + return -ENOMEM; + + i40e_create_dummy_udp_packet(raw_packet, ipv4, IPPROTO_UDP, fd_data); + + if (ipv4) + ret = i40e_prepare_fdir_filter + (pf, fd_data, add, raw_packet, + I40E_UDPIP_DUMMY_PACKET_LEN, + I40E_FILTER_PCTYPE_NONF_IPV4_UDP); + else + ret = i40e_prepare_fdir_filter + (pf, fd_data, add, raw_packet, + I40E_UDPIP6_DUMMY_PACKET_LEN, + I40E_FILTER_PCTYPE_NONF_IPV6_UDP); + + if (ret) { + kfree(raw_packet); + return ret; + } + + i40e_change_filter_num(ipv4, add, &pf->fd_udp4_filter_cnt, + &pf->fd_udp6_filter_cnt); + + return 0; +} + +#define I40E_TCPIP_DUMMY_PACKET_LEN 54 +#define I40E_TCPIP6_DUMMY_PACKET_LEN 74 +/** + * i40e_add_del_fdir_tcp - Add/Remove TCPv4 filters + * @vsi: pointer to the targeted VSI + * @fd_data: the flow director data required for the FDir descriptor + * @add: true adds a filter, false removes it + * @ipv4: true is v4, false is v6 + * + * Returns 0 if the filters were successfully added or removed + **/ +static int i40e_add_del_fdir_tcp(struct i40e_vsi *vsi, + struct i40e_fdir_filter *fd_data, + bool add, + bool ipv4) +{ + struct i40e_pf *pf = vsi->back; + u8 *raw_packet; + int ret; + + raw_packet = kzalloc(I40E_FDIR_MAX_RAW_PACKET_SIZE, GFP_KERNEL); + if (!raw_packet) + return -ENOMEM; + + i40e_create_dummy_tcp_packet(raw_packet, ipv4, IPPROTO_TCP, fd_data); + if (ipv4) + ret = i40e_prepare_fdir_filter + (pf, fd_data, add, raw_packet, + I40E_TCPIP_DUMMY_PACKET_LEN, + I40E_FILTER_PCTYPE_NONF_IPV4_TCP); + else + ret = i40e_prepare_fdir_filter + (pf, fd_data, add, raw_packet, + I40E_TCPIP6_DUMMY_PACKET_LEN, + I40E_FILTER_PCTYPE_NONF_IPV6_TCP); + + if (ret) { + kfree(raw_packet); + return ret; + } + + i40e_change_filter_num(ipv4, add, &pf->fd_tcp4_filter_cnt, + &pf->fd_tcp6_filter_cnt); + + if (add) { + if ((pf->flags & I40E_FLAG_FD_ATR_ENABLED) && + I40E_DEBUG_FD & pf->hw.debug_mask) + dev_info(&pf->pdev->dev, "Forcing ATR off, sideband rules for TCP/IPv4 flow being applied\n"); + set_bit(__I40E_FD_ATR_AUTO_DISABLED, pf->state); + } + return 0; +} + +#define I40E_SCTPIP_DUMMY_PACKET_LEN 46 +#define I40E_SCTPIP6_DUMMY_PACKET_LEN 66 +/** + * i40e_add_del_fdir_sctp - Add/Remove SCTPv4 Flow Director filters for + * a specific flow spec + * @vsi: pointer to the targeted VSI + * @fd_data: the flow director data required for the FDir descriptor + * @add: true adds a filter, false removes it + * @ipv4: true is v4, false is v6 + * + * Returns 0 if the filters were successfully added or removed + **/ +static int i40e_add_del_fdir_sctp(struct i40e_vsi *vsi, + struct i40e_fdir_filter *fd_data, + bool add, + bool ipv4) +{ + struct i40e_pf *pf = vsi->back; + u8 *raw_packet; + int ret; + + raw_packet = kzalloc(I40E_FDIR_MAX_RAW_PACKET_SIZE, GFP_KERNEL); + if (!raw_packet) + return -ENOMEM; + + i40e_create_dummy_sctp_packet(raw_packet, ipv4, IPPROTO_SCTP, fd_data); + + if (ipv4) + ret = i40e_prepare_fdir_filter + (pf, fd_data, add, raw_packet, + I40E_SCTPIP_DUMMY_PACKET_LEN, + I40E_FILTER_PCTYPE_NONF_IPV4_SCTP); + else + ret = i40e_prepare_fdir_filter + (pf, fd_data, add, raw_packet, + I40E_SCTPIP6_DUMMY_PACKET_LEN, + I40E_FILTER_PCTYPE_NONF_IPV6_SCTP); + + if (ret) { + kfree(raw_packet); + return ret; + } + + i40e_change_filter_num(ipv4, add, &pf->fd_sctp4_filter_cnt, + &pf->fd_sctp6_filter_cnt); + + return 0; +} + +#define I40E_IP_DUMMY_PACKET_LEN 34 +#define I40E_IP6_DUMMY_PACKET_LEN 54 +/** + * i40e_add_del_fdir_ip - Add/Remove IPv4 Flow Director filters for + * a specific flow spec + * @vsi: pointer to the targeted VSI + * @fd_data: the flow director data required for the FDir descriptor + * @add: true adds a filter, false removes it + * @ipv4: true is v4, false is v6 + * + * Returns 0 if the filters were successfully added or removed + **/ +static int i40e_add_del_fdir_ip(struct i40e_vsi *vsi, + struct i40e_fdir_filter *fd_data, + bool add, + bool ipv4) +{ + struct i40e_pf *pf = vsi->back; + int payload_offset; + u8 *raw_packet; + int iter_start; + int iter_end; + int ret; + int i; + + if (ipv4) { + iter_start = I40E_FILTER_PCTYPE_NONF_IPV4_OTHER; + iter_end = I40E_FILTER_PCTYPE_FRAG_IPV4; + } else { + iter_start = I40E_FILTER_PCTYPE_NONF_IPV6_OTHER; + iter_end = I40E_FILTER_PCTYPE_FRAG_IPV6; + } + + for (i = iter_start; i <= iter_end; i++) { + raw_packet = kzalloc(I40E_FDIR_MAX_RAW_PACKET_SIZE, GFP_KERNEL); + if (!raw_packet) + return -ENOMEM; + + /* IPv6 no header option differs from IPv4 */ + (void)i40e_create_dummy_packet + (raw_packet, ipv4, (ipv4) ? IPPROTO_IP : IPPROTO_NONE, + fd_data); + + payload_offset = (ipv4) ? I40E_IP_DUMMY_PACKET_LEN : + I40E_IP6_DUMMY_PACKET_LEN; + ret = i40e_prepare_fdir_filter(pf, fd_data, add, raw_packet, + payload_offset, i); + if (ret) + goto err; + } + + i40e_change_filter_num(ipv4, add, &pf->fd_ip4_filter_cnt, + &pf->fd_ip6_filter_cnt); + + return 0; +err: + kfree(raw_packet); + return ret; +} + +/** + * i40e_add_del_fdir - Build raw packets to add/del fdir filter + * @vsi: pointer to the targeted VSI + * @input: filter to add or delete + * @add: true adds a filter, false removes it + * + **/ +int i40e_add_del_fdir(struct i40e_vsi *vsi, + struct i40e_fdir_filter *input, bool add) +{ + enum ip_ver { ipv6 = 0, ipv4 = 1 }; + struct i40e_pf *pf = vsi->back; + int ret; + + switch (input->flow_type & ~FLOW_EXT) { + case TCP_V4_FLOW: + ret = i40e_add_del_fdir_tcp(vsi, input, add, ipv4); + break; + case UDP_V4_FLOW: + ret = i40e_add_del_fdir_udp(vsi, input, add, ipv4); + break; + case SCTP_V4_FLOW: + ret = i40e_add_del_fdir_sctp(vsi, input, add, ipv4); + break; + case TCP_V6_FLOW: + ret = i40e_add_del_fdir_tcp(vsi, input, add, ipv6); + break; + case UDP_V6_FLOW: + ret = i40e_add_del_fdir_udp(vsi, input, add, ipv6); + break; + case SCTP_V6_FLOW: + ret = i40e_add_del_fdir_sctp(vsi, input, add, ipv6); + break; + case IP_USER_FLOW: + switch (input->ipl4_proto) { + case IPPROTO_TCP: + ret = i40e_add_del_fdir_tcp(vsi, input, add, ipv4); + break; + case IPPROTO_UDP: + ret = i40e_add_del_fdir_udp(vsi, input, add, ipv4); + break; + case IPPROTO_SCTP: + ret = i40e_add_del_fdir_sctp(vsi, input, add, ipv4); + break; + case IPPROTO_IP: + ret = i40e_add_del_fdir_ip(vsi, input, add, ipv4); + break; + default: + /* We cannot support masking based on protocol */ + dev_info(&pf->pdev->dev, "Unsupported IPv4 protocol 0x%02x\n", + input->ipl4_proto); + return -EINVAL; + } + break; + case IPV6_USER_FLOW: + switch (input->ipl4_proto) { + case IPPROTO_TCP: + ret = i40e_add_del_fdir_tcp(vsi, input, add, ipv6); + break; + case IPPROTO_UDP: + ret = i40e_add_del_fdir_udp(vsi, input, add, ipv6); + break; + case IPPROTO_SCTP: + ret = i40e_add_del_fdir_sctp(vsi, input, add, ipv6); + break; + case IPPROTO_IP: + ret = i40e_add_del_fdir_ip(vsi, input, add, ipv6); + break; + default: + /* We cannot support masking based on protocol */ + dev_info(&pf->pdev->dev, "Unsupported IPv6 protocol 0x%02x\n", + input->ipl4_proto); + return -EINVAL; + } + break; + default: + dev_info(&pf->pdev->dev, "Unsupported flow type 0x%02x\n", + input->flow_type); + return -EINVAL; + } + + /* The buffer allocated here will be normally be freed by + * i40e_clean_fdir_tx_irq() as it reclaims resources after transmit + * completion. In the event of an error adding the buffer to the FDIR + * ring, it will immediately be freed. It may also be freed by + * i40e_clean_tx_ring() when closing the VSI. + */ + return ret; +} + +/** + * i40e_fd_handle_status - check the Programming Status for FD + * @rx_ring: the Rx ring for this descriptor + * @qword0_raw: qword0 + * @qword1: qword1 after le_to_cpu + * @prog_id: the id originally used for programming + * + * This is used to verify if the FD programming or invalidation + * requested by SW to the HW is successful or not and take actions accordingly. + **/ +static void i40e_fd_handle_status(struct i40e_ring *rx_ring, u64 qword0_raw, + u64 qword1, u8 prog_id) +{ + struct i40e_pf *pf = rx_ring->vsi->back; + struct pci_dev *pdev = pf->pdev; + struct i40e_16b_rx_wb_qw0 *qw0; + u32 fcnt_prog, fcnt_avail; + u32 error; + + qw0 = (struct i40e_16b_rx_wb_qw0 *)&qword0_raw; + error = (qword1 & I40E_RX_PROG_STATUS_DESC_QW1_ERROR_MASK) >> + I40E_RX_PROG_STATUS_DESC_QW1_ERROR_SHIFT; + + if (error == BIT(I40E_RX_PROG_STATUS_DESC_FD_TBL_FULL_SHIFT)) { + pf->fd_inv = le32_to_cpu(qw0->hi_dword.fd_id); + if (qw0->hi_dword.fd_id != 0 || + (I40E_DEBUG_FD & pf->hw.debug_mask)) + dev_warn(&pdev->dev, "ntuple filter loc = %d, could not be added\n", + pf->fd_inv); + + /* Check if the programming error is for ATR. + * If so, auto disable ATR and set a state for + * flush in progress. Next time we come here if flush is in + * progress do nothing, once flush is complete the state will + * be cleared. + */ + if (test_bit(__I40E_FD_FLUSH_REQUESTED, pf->state)) + return; + + pf->fd_add_err++; + /* store the current atr filter count */ + pf->fd_atr_cnt = i40e_get_current_atr_cnt(pf); + + if (qw0->hi_dword.fd_id == 0 && + test_bit(__I40E_FD_SB_AUTO_DISABLED, pf->state)) { + /* These set_bit() calls aren't atomic with the + * test_bit() here, but worse case we potentially + * disable ATR and queue a flush right after SB + * support is re-enabled. That shouldn't cause an + * issue in practice + */ + set_bit(__I40E_FD_ATR_AUTO_DISABLED, pf->state); + set_bit(__I40E_FD_FLUSH_REQUESTED, pf->state); + } + + /* filter programming failed most likely due to table full */ + fcnt_prog = i40e_get_global_fd_count(pf); + fcnt_avail = pf->fdir_pf_filter_count; + /* If ATR is running fcnt_prog can quickly change, + * if we are very close to full, it makes sense to disable + * FD ATR/SB and then re-enable it when there is room. + */ + if (fcnt_prog >= (fcnt_avail - I40E_FDIR_BUFFER_FULL_MARGIN)) { + if ((pf->flags & I40E_FLAG_FD_SB_ENABLED) && + !test_and_set_bit(__I40E_FD_SB_AUTO_DISABLED, + pf->state)) + if (I40E_DEBUG_FD & pf->hw.debug_mask) + dev_warn(&pdev->dev, "FD filter space full, new ntuple rules will not be added\n"); + } + } else if (error == BIT(I40E_RX_PROG_STATUS_DESC_NO_FD_ENTRY_SHIFT)) { + if (I40E_DEBUG_FD & pf->hw.debug_mask) + dev_info(&pdev->dev, "ntuple filter fd_id = %d, could not be removed\n", + qw0->hi_dword.fd_id); + } +} + +/** + * i40e_unmap_and_free_tx_resource - Release a Tx buffer + * @ring: the ring that owns the buffer + * @tx_buffer: the buffer to free + **/ +static void i40e_unmap_and_free_tx_resource(struct i40e_ring *ring, + struct i40e_tx_buffer *tx_buffer) +{ + if (tx_buffer->skb) { + if (tx_buffer->tx_flags & I40E_TX_FLAGS_FD_SB) + kfree(tx_buffer->raw_buf); + else if (ring_is_xdp(ring)) + xdp_return_frame(tx_buffer->xdpf); + else + dev_kfree_skb_any(tx_buffer->skb); + if (dma_unmap_len(tx_buffer, len)) + dma_unmap_single(ring->dev, + dma_unmap_addr(tx_buffer, dma), + dma_unmap_len(tx_buffer, len), + DMA_TO_DEVICE); + } else if (dma_unmap_len(tx_buffer, len)) { + dma_unmap_page(ring->dev, + dma_unmap_addr(tx_buffer, dma), + dma_unmap_len(tx_buffer, len), + DMA_TO_DEVICE); + } + + tx_buffer->next_to_watch = NULL; + tx_buffer->skb = NULL; + dma_unmap_len_set(tx_buffer, len, 0); + /* tx_buffer must be completely set up in the transmit path */ +} + +/** + * i40e_clean_tx_ring - Free any empty Tx buffers + * @tx_ring: ring to be cleaned + **/ +void i40e_clean_tx_ring(struct i40e_ring *tx_ring) +{ + unsigned long bi_size; + u16 i; + + if (ring_is_xdp(tx_ring) && tx_ring->xsk_pool) { + i40e_xsk_clean_tx_ring(tx_ring); + } else { + /* ring already cleared, nothing to do */ + if (!tx_ring->tx_bi) + return; + + /* Free all the Tx ring sk_buffs */ + for (i = 0; i < tx_ring->count; i++) + i40e_unmap_and_free_tx_resource(tx_ring, + &tx_ring->tx_bi[i]); + } + + bi_size = sizeof(struct i40e_tx_buffer) * tx_ring->count; + memset(tx_ring->tx_bi, 0, bi_size); + + /* Zero out the descriptor ring */ + memset(tx_ring->desc, 0, tx_ring->size); + + tx_ring->next_to_use = 0; + tx_ring->next_to_clean = 0; + + if (!tx_ring->netdev) + return; + + /* cleanup Tx queue statistics */ + netdev_tx_reset_queue(txring_txq(tx_ring)); +} + +/** + * i40e_free_tx_resources - Free Tx resources per queue + * @tx_ring: Tx descriptor ring for a specific queue + * + * Free all transmit software resources + **/ +void i40e_free_tx_resources(struct i40e_ring *tx_ring) +{ + i40e_clean_tx_ring(tx_ring); + kfree(tx_ring->tx_bi); + tx_ring->tx_bi = NULL; + + if (tx_ring->desc) { + dma_free_coherent(tx_ring->dev, tx_ring->size, + tx_ring->desc, tx_ring->dma); + tx_ring->desc = NULL; + } +} + +/** + * i40e_get_tx_pending - how many tx descriptors not processed + * @ring: the ring of descriptors + * @in_sw: use SW variables + * + * Since there is no access to the ring head register + * in XL710, we need to use our local copies + **/ +u32 i40e_get_tx_pending(struct i40e_ring *ring, bool in_sw) +{ + u32 head, tail; + + if (!in_sw) { + head = i40e_get_head(ring); + tail = readl(ring->tail); + } else { + head = ring->next_to_clean; + tail = ring->next_to_use; + } + + if (head != tail) + return (head < tail) ? + tail - head : (tail + ring->count - head); + + return 0; +} + +/** + * i40e_detect_recover_hung - Function to detect and recover hung_queues + * @vsi: pointer to vsi struct with tx queues + * + * VSI has netdev and netdev has TX queues. This function is to check each of + * those TX queues if they are hung, trigger recovery by issuing SW interrupt. + **/ +void i40e_detect_recover_hung(struct i40e_vsi *vsi) +{ + struct i40e_ring *tx_ring = NULL; + struct net_device *netdev; + unsigned int i; + int packets; + + if (!vsi) + return; + + if (test_bit(__I40E_VSI_DOWN, vsi->state)) + return; + + netdev = vsi->netdev; + if (!netdev) + return; + + if (!netif_carrier_ok(netdev)) + return; + + for (i = 0; i < vsi->num_queue_pairs; i++) { + tx_ring = vsi->tx_rings[i]; + if (tx_ring && tx_ring->desc) { + /* If packet counter has not changed the queue is + * likely stalled, so force an interrupt for this + * queue. + * + * prev_pkt_ctr would be negative if there was no + * pending work. + */ + packets = tx_ring->stats.packets & INT_MAX; + if (tx_ring->tx_stats.prev_pkt_ctr == packets) { + i40e_force_wb(vsi, tx_ring->q_vector); + continue; + } + + /* Memory barrier between read of packet count and call + * to i40e_get_tx_pending() + */ + smp_rmb(); + tx_ring->tx_stats.prev_pkt_ctr = + i40e_get_tx_pending(tx_ring, true) ? packets : -1; + } + } +} + +/** + * i40e_clean_tx_irq - Reclaim resources after transmit completes + * @vsi: the VSI we care about + * @tx_ring: Tx ring to clean + * @napi_budget: Used to determine if we are in netpoll + * @tx_cleaned: Out parameter set to the number of TXes cleaned + * + * Returns true if there's any budget left (e.g. the clean is finished) + **/ +static bool i40e_clean_tx_irq(struct i40e_vsi *vsi, + struct i40e_ring *tx_ring, int napi_budget, + unsigned int *tx_cleaned) +{ + int i = tx_ring->next_to_clean; + struct i40e_tx_buffer *tx_buf; + struct i40e_tx_desc *tx_head; + struct i40e_tx_desc *tx_desc; + unsigned int total_bytes = 0, total_packets = 0; + unsigned int budget = vsi->work_limit; + + tx_buf = &tx_ring->tx_bi[i]; + tx_desc = I40E_TX_DESC(tx_ring, i); + i -= tx_ring->count; + + tx_head = I40E_TX_DESC(tx_ring, i40e_get_head(tx_ring)); + + do { + struct i40e_tx_desc *eop_desc = tx_buf->next_to_watch; + + /* if next_to_watch is not set then there is no work pending */ + if (!eop_desc) + break; + + /* prevent any other reads prior to eop_desc */ + smp_rmb(); + + i40e_trace(clean_tx_irq, tx_ring, tx_desc, tx_buf); + /* we have caught up to head, no work left to do */ + if (tx_head == tx_desc) + break; + + /* clear next_to_watch to prevent false hangs */ + tx_buf->next_to_watch = NULL; + + /* update the statistics for this packet */ + total_bytes += tx_buf->bytecount; + total_packets += tx_buf->gso_segs; + + /* free the skb/XDP data */ + if (ring_is_xdp(tx_ring)) + xdp_return_frame(tx_buf->xdpf); + else + napi_consume_skb(tx_buf->skb, napi_budget); + + /* unmap skb header data */ + dma_unmap_single(tx_ring->dev, + dma_unmap_addr(tx_buf, dma), + dma_unmap_len(tx_buf, len), + DMA_TO_DEVICE); + + /* clear tx_buffer data */ + tx_buf->skb = NULL; + dma_unmap_len_set(tx_buf, len, 0); + + /* unmap remaining buffers */ + while (tx_desc != eop_desc) { + i40e_trace(clean_tx_irq_unmap, + tx_ring, tx_desc, tx_buf); + + tx_buf++; + tx_desc++; + i++; + if (unlikely(!i)) { + i -= tx_ring->count; + tx_buf = tx_ring->tx_bi; + tx_desc = I40E_TX_DESC(tx_ring, 0); + } + + /* unmap any remaining paged data */ + if (dma_unmap_len(tx_buf, len)) { + dma_unmap_page(tx_ring->dev, + dma_unmap_addr(tx_buf, dma), + dma_unmap_len(tx_buf, len), + DMA_TO_DEVICE); + dma_unmap_len_set(tx_buf, len, 0); + } + } + + /* move us one more past the eop_desc for start of next pkt */ + tx_buf++; + tx_desc++; + i++; + if (unlikely(!i)) { + i -= tx_ring->count; + tx_buf = tx_ring->tx_bi; + tx_desc = I40E_TX_DESC(tx_ring, 0); + } + + prefetch(tx_desc); + + /* update budget accounting */ + budget--; + } while (likely(budget)); + + i += tx_ring->count; + tx_ring->next_to_clean = i; + i40e_update_tx_stats(tx_ring, total_packets, total_bytes); + i40e_arm_wb(tx_ring, vsi, budget); + + if (ring_is_xdp(tx_ring)) + return !!budget; + + /* notify netdev of completed buffers */ + netdev_tx_completed_queue(txring_txq(tx_ring), + total_packets, total_bytes); + +#define TX_WAKE_THRESHOLD ((s16)(DESC_NEEDED * 2)) + if (unlikely(total_packets && netif_carrier_ok(tx_ring->netdev) && + (I40E_DESC_UNUSED(tx_ring) >= TX_WAKE_THRESHOLD))) { + /* Make sure that anybody stopping the queue after this + * sees the new next_to_clean. + */ + smp_mb(); + if (__netif_subqueue_stopped(tx_ring->netdev, + tx_ring->queue_index) && + !test_bit(__I40E_VSI_DOWN, vsi->state)) { + netif_wake_subqueue(tx_ring->netdev, + tx_ring->queue_index); + ++tx_ring->tx_stats.restart_queue; + } + } + + *tx_cleaned = total_packets; + return !!budget; +} + +/** + * i40e_enable_wb_on_itr - Arm hardware to do a wb, interrupts are not enabled + * @vsi: the VSI we care about + * @q_vector: the vector on which to enable writeback + * + **/ +static void i40e_enable_wb_on_itr(struct i40e_vsi *vsi, + struct i40e_q_vector *q_vector) +{ + u16 flags = q_vector->tx.ring[0].flags; + u32 val; + + if (!(flags & I40E_TXR_FLAGS_WB_ON_ITR)) + return; + + if (q_vector->arm_wb_state) + return; + + if (vsi->back->flags & I40E_FLAG_MSIX_ENABLED) { + val = I40E_PFINT_DYN_CTLN_WB_ON_ITR_MASK | + I40E_PFINT_DYN_CTLN_ITR_INDX_MASK; /* set noitr */ + + wr32(&vsi->back->hw, + I40E_PFINT_DYN_CTLN(q_vector->reg_idx), + val); + } else { + val = I40E_PFINT_DYN_CTL0_WB_ON_ITR_MASK | + I40E_PFINT_DYN_CTL0_ITR_INDX_MASK; /* set noitr */ + + wr32(&vsi->back->hw, I40E_PFINT_DYN_CTL0, val); + } + q_vector->arm_wb_state = true; +} + +/** + * i40e_force_wb - Issue SW Interrupt so HW does a wb + * @vsi: the VSI we care about + * @q_vector: the vector on which to force writeback + * + **/ +void i40e_force_wb(struct i40e_vsi *vsi, struct i40e_q_vector *q_vector) +{ + if (vsi->back->flags & I40E_FLAG_MSIX_ENABLED) { + u32 val = I40E_PFINT_DYN_CTLN_INTENA_MASK | + I40E_PFINT_DYN_CTLN_ITR_INDX_MASK | /* set noitr */ + I40E_PFINT_DYN_CTLN_SWINT_TRIG_MASK | + I40E_PFINT_DYN_CTLN_SW_ITR_INDX_ENA_MASK; + /* allow 00 to be written to the index */ + + wr32(&vsi->back->hw, + I40E_PFINT_DYN_CTLN(q_vector->reg_idx), val); + } else { + u32 val = I40E_PFINT_DYN_CTL0_INTENA_MASK | + I40E_PFINT_DYN_CTL0_ITR_INDX_MASK | /* set noitr */ + I40E_PFINT_DYN_CTL0_SWINT_TRIG_MASK | + I40E_PFINT_DYN_CTL0_SW_ITR_INDX_ENA_MASK; + /* allow 00 to be written to the index */ + + wr32(&vsi->back->hw, I40E_PFINT_DYN_CTL0, val); + } +} + +static inline bool i40e_container_is_rx(struct i40e_q_vector *q_vector, + struct i40e_ring_container *rc) +{ + return &q_vector->rx == rc; +} + +static inline unsigned int i40e_itr_divisor(struct i40e_q_vector *q_vector) +{ + unsigned int divisor; + + switch (q_vector->vsi->back->hw.phy.link_info.link_speed) { + case I40E_LINK_SPEED_40GB: + divisor = I40E_ITR_ADAPTIVE_MIN_INC * 1024; + break; + case I40E_LINK_SPEED_25GB: + case I40E_LINK_SPEED_20GB: + divisor = I40E_ITR_ADAPTIVE_MIN_INC * 512; + break; + default: + case I40E_LINK_SPEED_10GB: + divisor = I40E_ITR_ADAPTIVE_MIN_INC * 256; + break; + case I40E_LINK_SPEED_1GB: + case I40E_LINK_SPEED_100MB: + divisor = I40E_ITR_ADAPTIVE_MIN_INC * 32; + break; + } + + return divisor; +} + +/** + * i40e_update_itr - update the dynamic ITR value based on statistics + * @q_vector: structure containing interrupt and ring information + * @rc: structure containing ring performance data + * + * Stores a new ITR value based on packets and byte + * counts during the last interrupt. The advantage of per interrupt + * computation is faster updates and more accurate ITR for the current + * traffic pattern. Constants in this function were computed + * based on theoretical maximum wire speed and thresholds were set based + * on testing data as well as attempting to minimize response time + * while increasing bulk throughput. + **/ +static void i40e_update_itr(struct i40e_q_vector *q_vector, + struct i40e_ring_container *rc) +{ + unsigned int avg_wire_size, packets, bytes, itr; + unsigned long next_update = jiffies; + + /* If we don't have any rings just leave ourselves set for maximum + * possible latency so we take ourselves out of the equation. + */ + if (!rc->ring || !ITR_IS_DYNAMIC(rc->ring->itr_setting)) + return; + + /* For Rx we want to push the delay up and default to low latency. + * for Tx we want to pull the delay down and default to high latency. + */ + itr = i40e_container_is_rx(q_vector, rc) ? + I40E_ITR_ADAPTIVE_MIN_USECS | I40E_ITR_ADAPTIVE_LATENCY : + I40E_ITR_ADAPTIVE_MAX_USECS | I40E_ITR_ADAPTIVE_LATENCY; + + /* If we didn't update within up to 1 - 2 jiffies we can assume + * that either packets are coming in so slow there hasn't been + * any work, or that there is so much work that NAPI is dealing + * with interrupt moderation and we don't need to do anything. + */ + if (time_after(next_update, rc->next_update)) + goto clear_counts; + + /* If itr_countdown is set it means we programmed an ITR within + * the last 4 interrupt cycles. This has a side effect of us + * potentially firing an early interrupt. In order to work around + * this we need to throw out any data received for a few + * interrupts following the update. + */ + if (q_vector->itr_countdown) { + itr = rc->target_itr; + goto clear_counts; + } + + packets = rc->total_packets; + bytes = rc->total_bytes; + + if (i40e_container_is_rx(q_vector, rc)) { + /* If Rx there are 1 to 4 packets and bytes are less than + * 9000 assume insufficient data to use bulk rate limiting + * approach unless Tx is already in bulk rate limiting. We + * are likely latency driven. + */ + if (packets && packets < 4 && bytes < 9000 && + (q_vector->tx.target_itr & I40E_ITR_ADAPTIVE_LATENCY)) { + itr = I40E_ITR_ADAPTIVE_LATENCY; + goto adjust_by_size; + } + } else if (packets < 4) { + /* If we have Tx and Rx ITR maxed and Tx ITR is running in + * bulk mode and we are receiving 4 or fewer packets just + * reset the ITR_ADAPTIVE_LATENCY bit for latency mode so + * that the Rx can relax. + */ + if (rc->target_itr == I40E_ITR_ADAPTIVE_MAX_USECS && + (q_vector->rx.target_itr & I40E_ITR_MASK) == + I40E_ITR_ADAPTIVE_MAX_USECS) + goto clear_counts; + } else if (packets > 32) { + /* If we have processed over 32 packets in a single interrupt + * for Tx assume we need to switch over to "bulk" mode. + */ + rc->target_itr &= ~I40E_ITR_ADAPTIVE_LATENCY; + } + + /* We have no packets to actually measure against. This means + * either one of the other queues on this vector is active or + * we are a Tx queue doing TSO with too high of an interrupt rate. + * + * Between 4 and 56 we can assume that our current interrupt delay + * is only slightly too low. As such we should increase it by a small + * fixed amount. + */ + if (packets < 56) { + itr = rc->target_itr + I40E_ITR_ADAPTIVE_MIN_INC; + if ((itr & I40E_ITR_MASK) > I40E_ITR_ADAPTIVE_MAX_USECS) { + itr &= I40E_ITR_ADAPTIVE_LATENCY; + itr += I40E_ITR_ADAPTIVE_MAX_USECS; + } + goto clear_counts; + } + + if (packets <= 256) { + itr = min(q_vector->tx.current_itr, q_vector->rx.current_itr); + itr &= I40E_ITR_MASK; + + /* Between 56 and 112 is our "goldilocks" zone where we are + * working out "just right". Just report that our current + * ITR is good for us. + */ + if (packets <= 112) + goto clear_counts; + + /* If packet count is 128 or greater we are likely looking + * at a slight overrun of the delay we want. Try halving + * our delay to see if that will cut the number of packets + * in half per interrupt. + */ + itr /= 2; + itr &= I40E_ITR_MASK; + if (itr < I40E_ITR_ADAPTIVE_MIN_USECS) + itr = I40E_ITR_ADAPTIVE_MIN_USECS; + + goto clear_counts; + } + + /* The paths below assume we are dealing with a bulk ITR since + * number of packets is greater than 256. We are just going to have + * to compute a value and try to bring the count under control, + * though for smaller packet sizes there isn't much we can do as + * NAPI polling will likely be kicking in sooner rather than later. + */ + itr = I40E_ITR_ADAPTIVE_BULK; + +adjust_by_size: + /* If packet counts are 256 or greater we can assume we have a gross + * overestimation of what the rate should be. Instead of trying to fine + * tune it just use the formula below to try and dial in an exact value + * give the current packet size of the frame. + */ + avg_wire_size = bytes / packets; + + /* The following is a crude approximation of: + * wmem_default / (size + overhead) = desired_pkts_per_int + * rate / bits_per_byte / (size + ethernet overhead) = pkt_rate + * (desired_pkt_rate / pkt_rate) * usecs_per_sec = ITR value + * + * Assuming wmem_default is 212992 and overhead is 640 bytes per + * packet, (256 skb, 64 headroom, 320 shared info), we can reduce the + * formula down to + * + * (170 * (size + 24)) / (size + 640) = ITR + * + * We first do some math on the packet size and then finally bitshift + * by 8 after rounding up. We also have to account for PCIe link speed + * difference as ITR scales based on this. + */ + if (avg_wire_size <= 60) { + /* Start at 250k ints/sec */ + avg_wire_size = 4096; + } else if (avg_wire_size <= 380) { + /* 250K ints/sec to 60K ints/sec */ + avg_wire_size *= 40; + avg_wire_size += 1696; + } else if (avg_wire_size <= 1084) { + /* 60K ints/sec to 36K ints/sec */ + avg_wire_size *= 15; + avg_wire_size += 11452; + } else if (avg_wire_size <= 1980) { + /* 36K ints/sec to 30K ints/sec */ + avg_wire_size *= 5; + avg_wire_size += 22420; + } else { + /* plateau at a limit of 30K ints/sec */ + avg_wire_size = 32256; + } + + /* If we are in low latency mode halve our delay which doubles the + * rate to somewhere between 100K to 16K ints/sec + */ + if (itr & I40E_ITR_ADAPTIVE_LATENCY) + avg_wire_size /= 2; + + /* Resultant value is 256 times larger than it needs to be. This + * gives us room to adjust the value as needed to either increase + * or decrease the value based on link speeds of 10G, 2.5G, 1G, etc. + * + * Use addition as we have already recorded the new latency flag + * for the ITR value. + */ + itr += DIV_ROUND_UP(avg_wire_size, i40e_itr_divisor(q_vector)) * + I40E_ITR_ADAPTIVE_MIN_INC; + + if ((itr & I40E_ITR_MASK) > I40E_ITR_ADAPTIVE_MAX_USECS) { + itr &= I40E_ITR_ADAPTIVE_LATENCY; + itr += I40E_ITR_ADAPTIVE_MAX_USECS; + } + +clear_counts: + /* write back value */ + rc->target_itr = itr; + + /* next update should occur within next jiffy */ + rc->next_update = next_update + 1; + + rc->total_bytes = 0; + rc->total_packets = 0; +} + +static struct i40e_rx_buffer *i40e_rx_bi(struct i40e_ring *rx_ring, u32 idx) +{ + return &rx_ring->rx_bi[idx]; +} + +/** + * i40e_reuse_rx_page - page flip buffer and store it back on the ring + * @rx_ring: rx descriptor ring to store buffers on + * @old_buff: donor buffer to have page reused + * + * Synchronizes page for reuse by the adapter + **/ +static void i40e_reuse_rx_page(struct i40e_ring *rx_ring, + struct i40e_rx_buffer *old_buff) +{ + struct i40e_rx_buffer *new_buff; + u16 nta = rx_ring->next_to_alloc; + + new_buff = i40e_rx_bi(rx_ring, nta); + + /* update, and store next to alloc */ + nta++; + rx_ring->next_to_alloc = (nta < rx_ring->count) ? nta : 0; + + /* transfer page from old buffer to new buffer */ + new_buff->dma = old_buff->dma; + new_buff->page = old_buff->page; + new_buff->page_offset = old_buff->page_offset; + new_buff->pagecnt_bias = old_buff->pagecnt_bias; + + /* clear contents of buffer_info */ + old_buff->page = NULL; +} + +/** + * i40e_clean_programming_status - clean the programming status descriptor + * @rx_ring: the rx ring that has this descriptor + * @qword0_raw: qword0 + * @qword1: qword1 representing status_error_len in CPU ordering + * + * Flow director should handle FD_FILTER_STATUS to check its filter programming + * status being successful or not and take actions accordingly. FCoE should + * handle its context/filter programming/invalidation status and take actions. + * + * Returns an i40e_rx_buffer to reuse if the cleanup occurred, otherwise NULL. + **/ +void i40e_clean_programming_status(struct i40e_ring *rx_ring, u64 qword0_raw, + u64 qword1) +{ + u8 id; + + id = (qword1 & I40E_RX_PROG_STATUS_DESC_QW1_PROGID_MASK) >> + I40E_RX_PROG_STATUS_DESC_QW1_PROGID_SHIFT; + + if (id == I40E_RX_PROG_STATUS_DESC_FD_FILTER_STATUS) + i40e_fd_handle_status(rx_ring, qword0_raw, qword1, id); +} + +/** + * i40e_setup_tx_descriptors - Allocate the Tx descriptors + * @tx_ring: the tx ring to set up + * + * Return 0 on success, negative on error + **/ +int i40e_setup_tx_descriptors(struct i40e_ring *tx_ring) +{ + struct device *dev = tx_ring->dev; + int bi_size; + + if (!dev) + return -ENOMEM; + + /* warn if we are about to overwrite the pointer */ + WARN_ON(tx_ring->tx_bi); + bi_size = sizeof(struct i40e_tx_buffer) * tx_ring->count; + tx_ring->tx_bi = kzalloc(bi_size, GFP_KERNEL); + if (!tx_ring->tx_bi) + goto err; + + u64_stats_init(&tx_ring->syncp); + + /* round up to nearest 4K */ + tx_ring->size = tx_ring->count * sizeof(struct i40e_tx_desc); + /* add u32 for head writeback, align after this takes care of + * guaranteeing this is at least one cache line in size + */ + tx_ring->size += sizeof(u32); + tx_ring->size = ALIGN(tx_ring->size, 4096); + tx_ring->desc = dma_alloc_coherent(dev, tx_ring->size, + &tx_ring->dma, GFP_KERNEL); + if (!tx_ring->desc) { + dev_info(dev, "Unable to allocate memory for the Tx descriptor ring, size=%d\n", + tx_ring->size); + goto err; + } + + tx_ring->next_to_use = 0; + tx_ring->next_to_clean = 0; + tx_ring->tx_stats.prev_pkt_ctr = -1; + return 0; + +err: + kfree(tx_ring->tx_bi); + tx_ring->tx_bi = NULL; + return -ENOMEM; +} + +static void i40e_clear_rx_bi(struct i40e_ring *rx_ring) +{ + memset(rx_ring->rx_bi, 0, sizeof(*rx_ring->rx_bi) * rx_ring->count); +} + +/** + * i40e_clean_rx_ring - Free Rx buffers + * @rx_ring: ring to be cleaned + **/ +void i40e_clean_rx_ring(struct i40e_ring *rx_ring) +{ + u16 i; + + /* ring already cleared, nothing to do */ + if (!rx_ring->rx_bi) + return; + + if (rx_ring->xsk_pool) { + i40e_xsk_clean_rx_ring(rx_ring); + goto skip_free; + } + + /* Free all the Rx ring sk_buffs */ + for (i = 0; i < rx_ring->count; i++) { + struct i40e_rx_buffer *rx_bi = i40e_rx_bi(rx_ring, i); + + if (!rx_bi->page) + continue; + + /* Invalidate cache lines that may have been written to by + * device so that we avoid corrupting memory. + */ + dma_sync_single_range_for_cpu(rx_ring->dev, + rx_bi->dma, + rx_bi->page_offset, + rx_ring->rx_buf_len, + DMA_FROM_DEVICE); + + /* free resources associated with mapping */ + dma_unmap_page_attrs(rx_ring->dev, rx_bi->dma, + i40e_rx_pg_size(rx_ring), + DMA_FROM_DEVICE, + I40E_RX_DMA_ATTR); + + __page_frag_cache_drain(rx_bi->page, rx_bi->pagecnt_bias); + + rx_bi->page = NULL; + rx_bi->page_offset = 0; + } + +skip_free: + if (rx_ring->xsk_pool) + i40e_clear_rx_bi_zc(rx_ring); + else + i40e_clear_rx_bi(rx_ring); + + /* Zero out the descriptor ring */ + memset(rx_ring->desc, 0, rx_ring->size); + + rx_ring->next_to_alloc = 0; + rx_ring->next_to_clean = 0; + rx_ring->next_to_process = 0; + rx_ring->next_to_use = 0; +} + +/** + * i40e_free_rx_resources - Free Rx resources + * @rx_ring: ring to clean the resources from + * + * Free all receive software resources + **/ +void i40e_free_rx_resources(struct i40e_ring *rx_ring) +{ + i40e_clean_rx_ring(rx_ring); + if (rx_ring->vsi->type == I40E_VSI_MAIN) + xdp_rxq_info_unreg(&rx_ring->xdp_rxq); + rx_ring->xdp_prog = NULL; + kfree(rx_ring->rx_bi); + rx_ring->rx_bi = NULL; + + if (rx_ring->desc) { + dma_free_coherent(rx_ring->dev, rx_ring->size, + rx_ring->desc, rx_ring->dma); + rx_ring->desc = NULL; + } +} + +/** + * i40e_setup_rx_descriptors - Allocate Rx descriptors + * @rx_ring: Rx descriptor ring (for a specific queue) to setup + * + * Returns 0 on success, negative on failure + **/ +int i40e_setup_rx_descriptors(struct i40e_ring *rx_ring) +{ + struct device *dev = rx_ring->dev; + + u64_stats_init(&rx_ring->syncp); + + /* Round up to nearest 4K */ + rx_ring->size = rx_ring->count * sizeof(union i40e_rx_desc); + rx_ring->size = ALIGN(rx_ring->size, 4096); + rx_ring->desc = dma_alloc_coherent(dev, rx_ring->size, + &rx_ring->dma, GFP_KERNEL); + + if (!rx_ring->desc) { + dev_info(dev, "Unable to allocate memory for the Rx descriptor ring, size=%d\n", + rx_ring->size); + return -ENOMEM; + } + + rx_ring->next_to_alloc = 0; + rx_ring->next_to_clean = 0; + rx_ring->next_to_process = 0; + rx_ring->next_to_use = 0; + + rx_ring->xdp_prog = rx_ring->vsi->xdp_prog; + + rx_ring->rx_bi = + kcalloc(rx_ring->count, sizeof(*rx_ring->rx_bi), GFP_KERNEL); + if (!rx_ring->rx_bi) + return -ENOMEM; + + return 0; +} + +/** + * i40e_release_rx_desc - Store the new tail and head values + * @rx_ring: ring to bump + * @val: new head index + **/ +void i40e_release_rx_desc(struct i40e_ring *rx_ring, u32 val) +{ + rx_ring->next_to_use = val; + + /* update next to alloc since we have filled the ring */ + rx_ring->next_to_alloc = val; + + /* Force memory writes to complete before letting h/w + * know there are new descriptors to fetch. (Only + * applicable for weak-ordered memory model archs, + * such as IA-64). + */ + wmb(); + writel(val, rx_ring->tail); +} + +#if (PAGE_SIZE >= 8192) +static unsigned int i40e_rx_frame_truesize(struct i40e_ring *rx_ring, + unsigned int size) +{ + unsigned int truesize; + + truesize = rx_ring->rx_offset ? + SKB_DATA_ALIGN(size + rx_ring->rx_offset) + + SKB_DATA_ALIGN(sizeof(struct skb_shared_info)) : + SKB_DATA_ALIGN(size); + return truesize; +} +#endif + +/** + * i40e_alloc_mapped_page - recycle or make a new page + * @rx_ring: ring to use + * @bi: rx_buffer struct to modify + * + * Returns true if the page was successfully allocated or + * reused. + **/ +static bool i40e_alloc_mapped_page(struct i40e_ring *rx_ring, + struct i40e_rx_buffer *bi) +{ + struct page *page = bi->page; + dma_addr_t dma; + + /* since we are recycling buffers we should seldom need to alloc */ + if (likely(page)) { + rx_ring->rx_stats.page_reuse_count++; + return true; + } + + /* alloc new page for storage */ + page = dev_alloc_pages(i40e_rx_pg_order(rx_ring)); + if (unlikely(!page)) { + rx_ring->rx_stats.alloc_page_failed++; + return false; + } + + rx_ring->rx_stats.page_alloc_count++; + + /* map page for use */ + dma = dma_map_page_attrs(rx_ring->dev, page, 0, + i40e_rx_pg_size(rx_ring), + DMA_FROM_DEVICE, + I40E_RX_DMA_ATTR); + + /* if mapping failed free memory back to system since + * there isn't much point in holding memory we can't use + */ + if (dma_mapping_error(rx_ring->dev, dma)) { + __free_pages(page, i40e_rx_pg_order(rx_ring)); + rx_ring->rx_stats.alloc_page_failed++; + return false; + } + + bi->dma = dma; + bi->page = page; + bi->page_offset = rx_ring->rx_offset; + page_ref_add(page, USHRT_MAX - 1); + bi->pagecnt_bias = USHRT_MAX; + + return true; +} + +/** + * i40e_alloc_rx_buffers - Replace used receive buffers + * @rx_ring: ring to place buffers on + * @cleaned_count: number of buffers to replace + * + * Returns false if all allocations were successful, true if any fail + **/ +bool i40e_alloc_rx_buffers(struct i40e_ring *rx_ring, u16 cleaned_count) +{ + u16 ntu = rx_ring->next_to_use; + union i40e_rx_desc *rx_desc; + struct i40e_rx_buffer *bi; + + /* do nothing if no valid netdev defined */ + if (!rx_ring->netdev || !cleaned_count) + return false; + + rx_desc = I40E_RX_DESC(rx_ring, ntu); + bi = i40e_rx_bi(rx_ring, ntu); + + do { + if (!i40e_alloc_mapped_page(rx_ring, bi)) + goto no_buffers; + + /* sync the buffer for use by the device */ + dma_sync_single_range_for_device(rx_ring->dev, bi->dma, + bi->page_offset, + rx_ring->rx_buf_len, + DMA_FROM_DEVICE); + + /* Refresh the desc even if buffer_addrs didn't change + * because each write-back erases this info. + */ + rx_desc->read.pkt_addr = cpu_to_le64(bi->dma + bi->page_offset); + + rx_desc++; + bi++; + ntu++; + if (unlikely(ntu == rx_ring->count)) { + rx_desc = I40E_RX_DESC(rx_ring, 0); + bi = i40e_rx_bi(rx_ring, 0); + ntu = 0; + } + + /* clear the status bits for the next_to_use descriptor */ + rx_desc->wb.qword1.status_error_len = 0; + + cleaned_count--; + } while (cleaned_count); + + if (rx_ring->next_to_use != ntu) + i40e_release_rx_desc(rx_ring, ntu); + + return false; + +no_buffers: + if (rx_ring->next_to_use != ntu) + i40e_release_rx_desc(rx_ring, ntu); + + /* make sure to come back via polling to try again after + * allocation failure + */ + return true; +} + +/** + * i40e_rx_checksum - Indicate in skb if hw indicated a good cksum + * @vsi: the VSI we care about + * @skb: skb currently being received and modified + * @rx_desc: the receive descriptor + **/ +static inline void i40e_rx_checksum(struct i40e_vsi *vsi, + struct sk_buff *skb, + union i40e_rx_desc *rx_desc) +{ + struct i40e_rx_ptype_decoded decoded; + u32 rx_error, rx_status; + bool ipv4, ipv6; + u8 ptype; + u64 qword; + + qword = le64_to_cpu(rx_desc->wb.qword1.status_error_len); + ptype = (qword & I40E_RXD_QW1_PTYPE_MASK) >> I40E_RXD_QW1_PTYPE_SHIFT; + rx_error = (qword & I40E_RXD_QW1_ERROR_MASK) >> + I40E_RXD_QW1_ERROR_SHIFT; + rx_status = (qword & I40E_RXD_QW1_STATUS_MASK) >> + I40E_RXD_QW1_STATUS_SHIFT; + decoded = decode_rx_desc_ptype(ptype); + + skb->ip_summed = CHECKSUM_NONE; + + skb_checksum_none_assert(skb); + + /* Rx csum enabled and ip headers found? */ + if (!(vsi->netdev->features & NETIF_F_RXCSUM)) + return; + + /* did the hardware decode the packet and checksum? */ + if (!(rx_status & BIT(I40E_RX_DESC_STATUS_L3L4P_SHIFT))) + return; + + /* both known and outer_ip must be set for the below code to work */ + if (!(decoded.known && decoded.outer_ip)) + return; + + ipv4 = (decoded.outer_ip == I40E_RX_PTYPE_OUTER_IP) && + (decoded.outer_ip_ver == I40E_RX_PTYPE_OUTER_IPV4); + ipv6 = (decoded.outer_ip == I40E_RX_PTYPE_OUTER_IP) && + (decoded.outer_ip_ver == I40E_RX_PTYPE_OUTER_IPV6); + + if (ipv4 && + (rx_error & (BIT(I40E_RX_DESC_ERROR_IPE_SHIFT) | + BIT(I40E_RX_DESC_ERROR_EIPE_SHIFT)))) + goto checksum_fail; + + /* likely incorrect csum if alternate IP extension headers found */ + if (ipv6 && + rx_status & BIT(I40E_RX_DESC_STATUS_IPV6EXADD_SHIFT)) + /* don't increment checksum err here, non-fatal err */ + return; + + /* there was some L4 error, count error and punt packet to the stack */ + if (rx_error & BIT(I40E_RX_DESC_ERROR_L4E_SHIFT)) + goto checksum_fail; + + /* handle packets that were not able to be checksummed due + * to arrival speed, in this case the stack can compute + * the csum. + */ + if (rx_error & BIT(I40E_RX_DESC_ERROR_PPRS_SHIFT)) + return; + + /* If there is an outer header present that might contain a checksum + * we need to bump the checksum level by 1 to reflect the fact that + * we are indicating we validated the inner checksum. + */ + if (decoded.tunnel_type >= I40E_RX_PTYPE_TUNNEL_IP_GRENAT) + skb->csum_level = 1; + + /* Only report checksum unnecessary for TCP, UDP, or SCTP */ + switch (decoded.inner_prot) { + case I40E_RX_PTYPE_INNER_PROT_TCP: + case I40E_RX_PTYPE_INNER_PROT_UDP: + case I40E_RX_PTYPE_INNER_PROT_SCTP: + skb->ip_summed = CHECKSUM_UNNECESSARY; + fallthrough; + default: + break; + } + + return; + +checksum_fail: + vsi->back->hw_csum_rx_error++; +} + +/** + * i40e_ptype_to_htype - get a hash type + * @ptype: the ptype value from the descriptor + * + * Returns a hash type to be used by skb_set_hash + **/ +static inline int i40e_ptype_to_htype(u8 ptype) +{ + struct i40e_rx_ptype_decoded decoded = decode_rx_desc_ptype(ptype); + + if (!decoded.known) + return PKT_HASH_TYPE_NONE; + + if (decoded.outer_ip == I40E_RX_PTYPE_OUTER_IP && + decoded.payload_layer == I40E_RX_PTYPE_PAYLOAD_LAYER_PAY4) + return PKT_HASH_TYPE_L4; + else if (decoded.outer_ip == I40E_RX_PTYPE_OUTER_IP && + decoded.payload_layer == I40E_RX_PTYPE_PAYLOAD_LAYER_PAY3) + return PKT_HASH_TYPE_L3; + else + return PKT_HASH_TYPE_L2; +} + +/** + * i40e_rx_hash - set the hash value in the skb + * @ring: descriptor ring + * @rx_desc: specific descriptor + * @skb: skb currently being received and modified + * @rx_ptype: Rx packet type + **/ +static inline void i40e_rx_hash(struct i40e_ring *ring, + union i40e_rx_desc *rx_desc, + struct sk_buff *skb, + u8 rx_ptype) +{ + u32 hash; + const __le64 rss_mask = + cpu_to_le64((u64)I40E_RX_DESC_FLTSTAT_RSS_HASH << + I40E_RX_DESC_STATUS_FLTSTAT_SHIFT); + + if (!(ring->netdev->features & NETIF_F_RXHASH)) + return; + + if ((rx_desc->wb.qword1.status_error_len & rss_mask) == rss_mask) { + hash = le32_to_cpu(rx_desc->wb.qword0.hi_dword.rss); + skb_set_hash(skb, hash, i40e_ptype_to_htype(rx_ptype)); + } +} + +/** + * i40e_process_skb_fields - Populate skb header fields from Rx descriptor + * @rx_ring: rx descriptor ring packet is being transacted on + * @rx_desc: pointer to the EOP Rx descriptor + * @skb: pointer to current skb being populated + * + * This function checks the ring, descriptor, and packet information in + * order to populate the hash, checksum, VLAN, protocol, and + * other fields within the skb. + **/ +void i40e_process_skb_fields(struct i40e_ring *rx_ring, + union i40e_rx_desc *rx_desc, struct sk_buff *skb) +{ + u64 qword = le64_to_cpu(rx_desc->wb.qword1.status_error_len); + u32 rx_status = (qword & I40E_RXD_QW1_STATUS_MASK) >> + I40E_RXD_QW1_STATUS_SHIFT; + u32 tsynvalid = rx_status & I40E_RXD_QW1_STATUS_TSYNVALID_MASK; + u32 tsyn = (rx_status & I40E_RXD_QW1_STATUS_TSYNINDX_MASK) >> + I40E_RXD_QW1_STATUS_TSYNINDX_SHIFT; + u8 rx_ptype = (qword & I40E_RXD_QW1_PTYPE_MASK) >> + I40E_RXD_QW1_PTYPE_SHIFT; + + if (unlikely(tsynvalid)) + i40e_ptp_rx_hwtstamp(rx_ring->vsi->back, skb, tsyn); + + i40e_rx_hash(rx_ring, rx_desc, skb, rx_ptype); + + i40e_rx_checksum(rx_ring->vsi, skb, rx_desc); + + skb_record_rx_queue(skb, rx_ring->queue_index); + + if (qword & BIT(I40E_RX_DESC_STATUS_L2TAG1P_SHIFT)) { + __le16 vlan_tag = rx_desc->wb.qword0.lo_dword.l2tag1; + + __vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q), + le16_to_cpu(vlan_tag)); + } + + /* modifies the skb - consumes the enet header */ + skb->protocol = eth_type_trans(skb, rx_ring->netdev); +} + +/** + * i40e_cleanup_headers - Correct empty headers + * @rx_ring: rx descriptor ring packet is being transacted on + * @skb: pointer to current skb being fixed + * @rx_desc: pointer to the EOP Rx descriptor + * + * In addition if skb is not at least 60 bytes we need to pad it so that + * it is large enough to qualify as a valid Ethernet frame. + * + * Returns true if an error was encountered and skb was freed. + **/ +static bool i40e_cleanup_headers(struct i40e_ring *rx_ring, struct sk_buff *skb, + union i40e_rx_desc *rx_desc) + +{ + /* ERR_MASK will only have valid bits if EOP set, and + * what we are doing here is actually checking + * I40E_RX_DESC_ERROR_RXE_SHIFT, since it is the zeroth bit in + * the error field + */ + if (unlikely(i40e_test_staterr(rx_desc, + BIT(I40E_RXD_QW1_ERROR_SHIFT)))) { + dev_kfree_skb_any(skb); + return true; + } + + /* if eth_skb_pad returns an error the skb was freed */ + if (eth_skb_pad(skb)) + return true; + + return false; +} + +/** + * i40e_can_reuse_rx_page - Determine if page can be reused for another Rx + * @rx_buffer: buffer containing the page + * @rx_stats: rx stats structure for the rx ring + * + * If page is reusable, we have a green light for calling i40e_reuse_rx_page, + * which will assign the current buffer to the buffer that next_to_alloc is + * pointing to; otherwise, the DMA mapping needs to be destroyed and + * page freed. + * + * rx_stats will be updated to indicate whether the page was waived + * or busy if it could not be reused. + */ +static bool i40e_can_reuse_rx_page(struct i40e_rx_buffer *rx_buffer, + struct i40e_rx_queue_stats *rx_stats) +{ + unsigned int pagecnt_bias = rx_buffer->pagecnt_bias; + struct page *page = rx_buffer->page; + + /* Is any reuse possible? */ + if (!dev_page_is_reusable(page)) { + rx_stats->page_waive_count++; + return false; + } + +#if (PAGE_SIZE < 8192) + /* if we are only owner of page we can reuse it */ + if (unlikely((rx_buffer->page_count - pagecnt_bias) > 1)) { + rx_stats->page_busy_count++; + return false; + } +#else +#define I40E_LAST_OFFSET \ + (SKB_WITH_OVERHEAD(PAGE_SIZE) - I40E_RXBUFFER_2048) + if (rx_buffer->page_offset > I40E_LAST_OFFSET) { + rx_stats->page_busy_count++; + return false; + } +#endif + + /* If we have drained the page fragment pool we need to update + * the pagecnt_bias and page count so that we fully restock the + * number of references the driver holds. + */ + if (unlikely(pagecnt_bias == 1)) { + page_ref_add(page, USHRT_MAX - 1); + rx_buffer->pagecnt_bias = USHRT_MAX; + } + + return true; +} + +/** + * i40e_rx_buffer_flip - adjusted rx_buffer to point to an unused region + * @rx_buffer: Rx buffer to adjust + * @truesize: Size of adjustment + **/ +static void i40e_rx_buffer_flip(struct i40e_rx_buffer *rx_buffer, + unsigned int truesize) +{ +#if (PAGE_SIZE < 8192) + rx_buffer->page_offset ^= truesize; +#else + rx_buffer->page_offset += truesize; +#endif +} + +/** + * i40e_get_rx_buffer - Fetch Rx buffer and synchronize data for use + * @rx_ring: rx descriptor ring to transact packets on + * @size: size of buffer to add to skb + * + * This function will pull an Rx buffer from the ring and synchronize it + * for use by the CPU. + */ +static struct i40e_rx_buffer *i40e_get_rx_buffer(struct i40e_ring *rx_ring, + const unsigned int size) +{ + struct i40e_rx_buffer *rx_buffer; + + rx_buffer = i40e_rx_bi(rx_ring, rx_ring->next_to_process); + rx_buffer->page_count = +#if (PAGE_SIZE < 8192) + page_count(rx_buffer->page); +#else + 0; +#endif + prefetch_page_address(rx_buffer->page); + + /* we are reusing so sync this buffer for CPU use */ + dma_sync_single_range_for_cpu(rx_ring->dev, + rx_buffer->dma, + rx_buffer->page_offset, + size, + DMA_FROM_DEVICE); + + /* We have pulled a buffer for use, so decrement pagecnt_bias */ + rx_buffer->pagecnt_bias--; + + return rx_buffer; +} + +/** + * i40e_put_rx_buffer - Clean up used buffer and either recycle or free + * @rx_ring: rx descriptor ring to transact packets on + * @rx_buffer: rx buffer to pull data from + * + * This function will clean up the contents of the rx_buffer. It will + * either recycle the buffer or unmap it and free the associated resources. + */ +static void i40e_put_rx_buffer(struct i40e_ring *rx_ring, + struct i40e_rx_buffer *rx_buffer) +{ + if (i40e_can_reuse_rx_page(rx_buffer, &rx_ring->rx_stats)) { + /* hand second half of page back to the ring */ + i40e_reuse_rx_page(rx_ring, rx_buffer); + } else { + /* we are not reusing the buffer so unmap it */ + dma_unmap_page_attrs(rx_ring->dev, rx_buffer->dma, + i40e_rx_pg_size(rx_ring), + DMA_FROM_DEVICE, I40E_RX_DMA_ATTR); + __page_frag_cache_drain(rx_buffer->page, + rx_buffer->pagecnt_bias); + /* clear contents of buffer_info */ + rx_buffer->page = NULL; + } +} + +/** + * i40e_process_rx_buffs- Processing of buffers post XDP prog or on error + * @rx_ring: Rx descriptor ring to transact packets on + * @xdp_res: Result of the XDP program + * @xdp: xdp_buff pointing to the data + **/ +static void i40e_process_rx_buffs(struct i40e_ring *rx_ring, int xdp_res, + struct xdp_buff *xdp) +{ + u32 nr_frags = xdp_get_shared_info_from_buff(xdp)->nr_frags; + u32 next = rx_ring->next_to_clean, i = 0; + struct i40e_rx_buffer *rx_buffer; + + xdp->flags = 0; + + while (1) { + rx_buffer = i40e_rx_bi(rx_ring, next); + if (++next == rx_ring->count) + next = 0; + + if (!rx_buffer->page) + continue; + + if (xdp_res != I40E_XDP_CONSUMED) + i40e_rx_buffer_flip(rx_buffer, xdp->frame_sz); + else if (i++ <= nr_frags) + rx_buffer->pagecnt_bias++; + + /* EOP buffer will be put in i40e_clean_rx_irq() */ + if (next == rx_ring->next_to_process) + return; + + i40e_put_rx_buffer(rx_ring, rx_buffer); + } +} + +/** + * i40e_construct_skb - Allocate skb and populate it + * @rx_ring: rx descriptor ring to transact packets on + * @xdp: xdp_buff pointing to the data + * + * This function allocates an skb. It then populates it with the page + * data from the current receive descriptor, taking care to set up the + * skb correctly. + */ +static struct sk_buff *i40e_construct_skb(struct i40e_ring *rx_ring, + struct xdp_buff *xdp) +{ + unsigned int size = xdp->data_end - xdp->data; + struct i40e_rx_buffer *rx_buffer; + struct skb_shared_info *sinfo; + unsigned int headlen; + struct sk_buff *skb; + u32 nr_frags = 0; + + /* prefetch first cache line of first page */ + net_prefetch(xdp->data); + + /* Note, we get here by enabling legacy-rx via: + * + * ethtool --set-priv-flags <dev> legacy-rx on + * + * In this mode, we currently get 0 extra XDP headroom as + * opposed to having legacy-rx off, where we process XDP + * packets going to stack via i40e_build_skb(). The latter + * provides us currently with 192 bytes of headroom. + * + * For i40e_construct_skb() mode it means that the + * xdp->data_meta will always point to xdp->data, since + * the helper cannot expand the head. Should this ever + * change in future for legacy-rx mode on, then lets also + * add xdp->data_meta handling here. + */ + + /* allocate a skb to store the frags */ + skb = __napi_alloc_skb(&rx_ring->q_vector->napi, + I40E_RX_HDR_SIZE, + GFP_ATOMIC | __GFP_NOWARN); + if (unlikely(!skb)) + return NULL; + + /* Determine available headroom for copy */ + headlen = size; + if (headlen > I40E_RX_HDR_SIZE) + headlen = eth_get_headlen(skb->dev, xdp->data, + I40E_RX_HDR_SIZE); + + /* align pull length to size of long to optimize memcpy performance */ + memcpy(__skb_put(skb, headlen), xdp->data, + ALIGN(headlen, sizeof(long))); + + if (unlikely(xdp_buff_has_frags(xdp))) { + sinfo = xdp_get_shared_info_from_buff(xdp); + nr_frags = sinfo->nr_frags; + } + rx_buffer = i40e_rx_bi(rx_ring, rx_ring->next_to_clean); + /* update all of the pointers */ + size -= headlen; + if (size) { + if (unlikely(nr_frags >= MAX_SKB_FRAGS)) { + dev_kfree_skb(skb); + return NULL; + } + skb_add_rx_frag(skb, 0, rx_buffer->page, + rx_buffer->page_offset + headlen, + size, xdp->frame_sz); + /* buffer is used by skb, update page_offset */ + i40e_rx_buffer_flip(rx_buffer, xdp->frame_sz); + } else { + /* buffer is unused, reset bias back to rx_buffer */ + rx_buffer->pagecnt_bias++; + } + + if (unlikely(xdp_buff_has_frags(xdp))) { + struct skb_shared_info *skinfo = skb_shinfo(skb); + + memcpy(&skinfo->frags[skinfo->nr_frags], &sinfo->frags[0], + sizeof(skb_frag_t) * nr_frags); + + xdp_update_skb_shared_info(skb, skinfo->nr_frags + nr_frags, + sinfo->xdp_frags_size, + nr_frags * xdp->frame_sz, + xdp_buff_is_frag_pfmemalloc(xdp)); + + /* First buffer has already been processed, so bump ntc */ + if (++rx_ring->next_to_clean == rx_ring->count) + rx_ring->next_to_clean = 0; + + i40e_process_rx_buffs(rx_ring, I40E_XDP_PASS, xdp); + } + + return skb; +} + +/** + * i40e_build_skb - Build skb around an existing buffer + * @rx_ring: Rx descriptor ring to transact packets on + * @xdp: xdp_buff pointing to the data + * + * This function builds an skb around an existing Rx buffer, taking care + * to set up the skb correctly and avoid any memcpy overhead. + */ +static struct sk_buff *i40e_build_skb(struct i40e_ring *rx_ring, + struct xdp_buff *xdp) +{ + unsigned int metasize = xdp->data - xdp->data_meta; + struct skb_shared_info *sinfo; + struct sk_buff *skb; + u32 nr_frags; + + /* Prefetch first cache line of first page. If xdp->data_meta + * is unused, this points exactly as xdp->data, otherwise we + * likely have a consumer accessing first few bytes of meta + * data, and then actual data. + */ + net_prefetch(xdp->data_meta); + + if (unlikely(xdp_buff_has_frags(xdp))) { + sinfo = xdp_get_shared_info_from_buff(xdp); + nr_frags = sinfo->nr_frags; + } + + /* build an skb around the page buffer */ + skb = napi_build_skb(xdp->data_hard_start, xdp->frame_sz); + if (unlikely(!skb)) + return NULL; + + /* update pointers within the skb to store the data */ + skb_reserve(skb, xdp->data - xdp->data_hard_start); + __skb_put(skb, xdp->data_end - xdp->data); + if (metasize) + skb_metadata_set(skb, metasize); + + if (unlikely(xdp_buff_has_frags(xdp))) { + xdp_update_skb_shared_info(skb, nr_frags, + sinfo->xdp_frags_size, + nr_frags * xdp->frame_sz, + xdp_buff_is_frag_pfmemalloc(xdp)); + + i40e_process_rx_buffs(rx_ring, I40E_XDP_PASS, xdp); + } else { + struct i40e_rx_buffer *rx_buffer; + + rx_buffer = i40e_rx_bi(rx_ring, rx_ring->next_to_clean); + /* buffer is used by skb, update page_offset */ + i40e_rx_buffer_flip(rx_buffer, xdp->frame_sz); + } + + return skb; +} + +/** + * i40e_is_non_eop - process handling of non-EOP buffers + * @rx_ring: Rx ring being processed + * @rx_desc: Rx descriptor for current buffer + * + * If the buffer is an EOP buffer, this function exits returning false, + * otherwise return true indicating that this is in fact a non-EOP buffer. + */ +bool i40e_is_non_eop(struct i40e_ring *rx_ring, + union i40e_rx_desc *rx_desc) +{ + /* if we are the last buffer then there is nothing else to do */ +#define I40E_RXD_EOF BIT(I40E_RX_DESC_STATUS_EOF_SHIFT) + if (likely(i40e_test_staterr(rx_desc, I40E_RXD_EOF))) + return false; + + rx_ring->rx_stats.non_eop_descs++; + + return true; +} + +static int i40e_xmit_xdp_ring(struct xdp_frame *xdpf, + struct i40e_ring *xdp_ring); + +int i40e_xmit_xdp_tx_ring(struct xdp_buff *xdp, struct i40e_ring *xdp_ring) +{ + struct xdp_frame *xdpf = xdp_convert_buff_to_frame(xdp); + + if (unlikely(!xdpf)) + return I40E_XDP_CONSUMED; + + return i40e_xmit_xdp_ring(xdpf, xdp_ring); +} + +/** + * i40e_run_xdp - run an XDP program + * @rx_ring: Rx ring being processed + * @xdp: XDP buffer containing the frame + * @xdp_prog: XDP program to run + **/ +static int i40e_run_xdp(struct i40e_ring *rx_ring, struct xdp_buff *xdp, struct bpf_prog *xdp_prog) +{ + int err, result = I40E_XDP_PASS; + struct i40e_ring *xdp_ring; + u32 act; + + if (!xdp_prog) + goto xdp_out; + + prefetchw(xdp->data_hard_start); /* xdp_frame write */ + + act = bpf_prog_run_xdp(xdp_prog, xdp); + switch (act) { + case XDP_PASS: + break; + case XDP_TX: + xdp_ring = rx_ring->vsi->xdp_rings[rx_ring->queue_index]; + result = i40e_xmit_xdp_tx_ring(xdp, xdp_ring); + if (result == I40E_XDP_CONSUMED) + goto out_failure; + break; + case XDP_REDIRECT: + err = xdp_do_redirect(rx_ring->netdev, xdp, xdp_prog); + if (err) + goto out_failure; + result = I40E_XDP_REDIR; + break; + default: + bpf_warn_invalid_xdp_action(rx_ring->netdev, xdp_prog, act); + fallthrough; + case XDP_ABORTED: +out_failure: + trace_xdp_exception(rx_ring->netdev, xdp_prog, act); + fallthrough; /* handle aborts by dropping packet */ + case XDP_DROP: + result = I40E_XDP_CONSUMED; + break; + } +xdp_out: + return result; +} + +/** + * i40e_xdp_ring_update_tail - Updates the XDP Tx ring tail register + * @xdp_ring: XDP Tx ring + * + * This function updates the XDP Tx ring tail register. + **/ +void i40e_xdp_ring_update_tail(struct i40e_ring *xdp_ring) +{ + /* Force memory writes to complete before letting h/w + * know there are new descriptors to fetch. + */ + wmb(); + writel_relaxed(xdp_ring->next_to_use, xdp_ring->tail); +} + +/** + * i40e_update_rx_stats - Update Rx ring statistics + * @rx_ring: rx descriptor ring + * @total_rx_bytes: number of bytes received + * @total_rx_packets: number of packets received + * + * This function updates the Rx ring statistics. + **/ +void i40e_update_rx_stats(struct i40e_ring *rx_ring, + unsigned int total_rx_bytes, + unsigned int total_rx_packets) +{ + u64_stats_update_begin(&rx_ring->syncp); + rx_ring->stats.packets += total_rx_packets; + rx_ring->stats.bytes += total_rx_bytes; + u64_stats_update_end(&rx_ring->syncp); + rx_ring->q_vector->rx.total_packets += total_rx_packets; + rx_ring->q_vector->rx.total_bytes += total_rx_bytes; +} + +/** + * i40e_finalize_xdp_rx - Bump XDP Tx tail and/or flush redirect map + * @rx_ring: Rx ring + * @xdp_res: Result of the receive batch + * + * This function bumps XDP Tx tail and/or flush redirect map, and + * should be called when a batch of packets has been processed in the + * napi loop. + **/ +void i40e_finalize_xdp_rx(struct i40e_ring *rx_ring, unsigned int xdp_res) +{ + if (xdp_res & I40E_XDP_REDIR) + xdp_do_flush_map(); + + if (xdp_res & I40E_XDP_TX) { + struct i40e_ring *xdp_ring = + rx_ring->vsi->xdp_rings[rx_ring->queue_index]; + + i40e_xdp_ring_update_tail(xdp_ring); + } +} + +/** + * i40e_inc_ntp: Advance the next_to_process index + * @rx_ring: Rx ring + **/ +static void i40e_inc_ntp(struct i40e_ring *rx_ring) +{ + u32 ntp = rx_ring->next_to_process + 1; + + ntp = (ntp < rx_ring->count) ? ntp : 0; + rx_ring->next_to_process = ntp; + prefetch(I40E_RX_DESC(rx_ring, ntp)); +} + +/** + * i40e_add_xdp_frag: Add a frag to xdp_buff + * @xdp: xdp_buff pointing to the data + * @nr_frags: return number of buffers for the packet + * @rx_buffer: rx_buffer holding data of the current frag + * @size: size of data of current frag + */ +static int i40e_add_xdp_frag(struct xdp_buff *xdp, u32 *nr_frags, + struct i40e_rx_buffer *rx_buffer, u32 size) +{ + struct skb_shared_info *sinfo = xdp_get_shared_info_from_buff(xdp); + + if (!xdp_buff_has_frags(xdp)) { + sinfo->nr_frags = 0; + sinfo->xdp_frags_size = 0; + xdp_buff_set_frags_flag(xdp); + } else if (unlikely(sinfo->nr_frags >= MAX_SKB_FRAGS)) { + /* Overflowing packet: All frags need to be dropped */ + return -ENOMEM; + } + + __skb_fill_page_desc_noacc(sinfo, sinfo->nr_frags++, rx_buffer->page, + rx_buffer->page_offset, size); + + sinfo->xdp_frags_size += size; + + if (page_is_pfmemalloc(rx_buffer->page)) + xdp_buff_set_frag_pfmemalloc(xdp); + *nr_frags = sinfo->nr_frags; + + return 0; +} + +/** + * i40e_consume_xdp_buff - Consume all the buffers of the packet and update ntc + * @rx_ring: rx descriptor ring to transact packets on + * @xdp: xdp_buff pointing to the data + * @rx_buffer: rx_buffer of eop desc + */ +static void i40e_consume_xdp_buff(struct i40e_ring *rx_ring, + struct xdp_buff *xdp, + struct i40e_rx_buffer *rx_buffer) +{ + i40e_process_rx_buffs(rx_ring, I40E_XDP_CONSUMED, xdp); + i40e_put_rx_buffer(rx_ring, rx_buffer); + rx_ring->next_to_clean = rx_ring->next_to_process; + xdp->data = NULL; +} + +/** + * i40e_clean_rx_irq - Clean completed descriptors from Rx ring - bounce buf + * @rx_ring: rx descriptor ring to transact packets on + * @budget: Total limit on number of packets to process + * @rx_cleaned: Out parameter of the number of packets processed + * + * This function provides a "bounce buffer" approach to Rx interrupt + * processing. The advantage to this is that on systems that have + * expensive overhead for IOMMU access this provides a means of avoiding + * it by maintaining the mapping of the page to the system. + * + * Returns amount of work completed + **/ +static int i40e_clean_rx_irq(struct i40e_ring *rx_ring, int budget, + unsigned int *rx_cleaned) +{ + unsigned int total_rx_bytes = 0, total_rx_packets = 0; + u16 cleaned_count = I40E_DESC_UNUSED(rx_ring); + u16 clean_threshold = rx_ring->count / 2; + unsigned int offset = rx_ring->rx_offset; + struct xdp_buff *xdp = &rx_ring->xdp; + unsigned int xdp_xmit = 0; + struct bpf_prog *xdp_prog; + bool failure = false; + int xdp_res = 0; + + xdp_prog = READ_ONCE(rx_ring->xdp_prog); + + while (likely(total_rx_packets < (unsigned int)budget)) { + u16 ntp = rx_ring->next_to_process; + struct i40e_rx_buffer *rx_buffer; + union i40e_rx_desc *rx_desc; + struct sk_buff *skb; + unsigned int size; + u32 nfrags = 0; + bool neop; + u64 qword; + + /* return some buffers to hardware, one at a time is too slow */ + if (cleaned_count >= clean_threshold) { + failure = failure || + i40e_alloc_rx_buffers(rx_ring, cleaned_count); + cleaned_count = 0; + } + + rx_desc = I40E_RX_DESC(rx_ring, ntp); + + /* status_error_len will always be zero for unused descriptors + * because it's cleared in cleanup, and overlaps with hdr_addr + * which is always zero because packet split isn't used, if the + * hardware wrote DD then the length will be non-zero + */ + qword = le64_to_cpu(rx_desc->wb.qword1.status_error_len); + + /* This memory barrier is needed to keep us from reading + * any other fields out of the rx_desc until we have + * verified the descriptor has been written back. + */ + dma_rmb(); + + if (i40e_rx_is_programming_status(qword)) { + i40e_clean_programming_status(rx_ring, + rx_desc->raw.qword[0], + qword); + rx_buffer = i40e_rx_bi(rx_ring, ntp); + i40e_inc_ntp(rx_ring); + i40e_reuse_rx_page(rx_ring, rx_buffer); + /* Update ntc and bump cleaned count if not in the + * middle of mb packet. + */ + if (rx_ring->next_to_clean == ntp) { + rx_ring->next_to_clean = + rx_ring->next_to_process; + cleaned_count++; + } + continue; + } + + size = (qword & I40E_RXD_QW1_LENGTH_PBUF_MASK) >> + I40E_RXD_QW1_LENGTH_PBUF_SHIFT; + if (!size) + break; + + i40e_trace(clean_rx_irq, rx_ring, rx_desc, xdp); + /* retrieve a buffer from the ring */ + rx_buffer = i40e_get_rx_buffer(rx_ring, size); + + neop = i40e_is_non_eop(rx_ring, rx_desc); + i40e_inc_ntp(rx_ring); + + if (!xdp->data) { + unsigned char *hard_start; + + hard_start = page_address(rx_buffer->page) + + rx_buffer->page_offset - offset; + xdp_prepare_buff(xdp, hard_start, offset, size, true); +#if (PAGE_SIZE > 4096) + /* At larger PAGE_SIZE, frame_sz depend on len size */ + xdp->frame_sz = i40e_rx_frame_truesize(rx_ring, size); +#endif + } else if (i40e_add_xdp_frag(xdp, &nfrags, rx_buffer, size) && + !neop) { + /* Overflowing packet: Drop all frags on EOP */ + i40e_consume_xdp_buff(rx_ring, xdp, rx_buffer); + break; + } + + if (neop) + continue; + + xdp_res = i40e_run_xdp(rx_ring, xdp, xdp_prog); + + if (xdp_res) { + xdp_xmit |= xdp_res & (I40E_XDP_TX | I40E_XDP_REDIR); + + if (unlikely(xdp_buff_has_frags(xdp))) { + i40e_process_rx_buffs(rx_ring, xdp_res, xdp); + size = xdp_get_buff_len(xdp); + } else if (xdp_res & (I40E_XDP_TX | I40E_XDP_REDIR)) { + i40e_rx_buffer_flip(rx_buffer, xdp->frame_sz); + } else { + rx_buffer->pagecnt_bias++; + } + total_rx_bytes += size; + } else { + if (ring_uses_build_skb(rx_ring)) + skb = i40e_build_skb(rx_ring, xdp); + else + skb = i40e_construct_skb(rx_ring, xdp); + + /* drop if we failed to retrieve a buffer */ + if (!skb) { + rx_ring->rx_stats.alloc_buff_failed++; + i40e_consume_xdp_buff(rx_ring, xdp, rx_buffer); + break; + } + + if (i40e_cleanup_headers(rx_ring, skb, rx_desc)) + goto process_next; + + /* probably a little skewed due to removing CRC */ + total_rx_bytes += skb->len; + + /* populate checksum, VLAN, and protocol */ + i40e_process_skb_fields(rx_ring, rx_desc, skb); + + i40e_trace(clean_rx_irq_rx, rx_ring, rx_desc, xdp); + napi_gro_receive(&rx_ring->q_vector->napi, skb); + } + + /* update budget accounting */ + total_rx_packets++; +process_next: + cleaned_count += nfrags + 1; + i40e_put_rx_buffer(rx_ring, rx_buffer); + rx_ring->next_to_clean = rx_ring->next_to_process; + + xdp->data = NULL; + } + + i40e_finalize_xdp_rx(rx_ring, xdp_xmit); + + i40e_update_rx_stats(rx_ring, total_rx_bytes, total_rx_packets); + + *rx_cleaned = total_rx_packets; + + /* guarantee a trip back through this routine if there was a failure */ + return failure ? budget : (int)total_rx_packets; +} + +static inline u32 i40e_buildreg_itr(const int type, u16 itr) +{ + u32 val; + + /* We don't bother with setting the CLEARPBA bit as the data sheet + * points out doing so is "meaningless since it was already + * auto-cleared". The auto-clearing happens when the interrupt is + * asserted. + * + * Hardware errata 28 for also indicates that writing to a + * xxINT_DYN_CTLx CSR with INTENA_MSK (bit 31) set to 0 will clear + * an event in the PBA anyway so we need to rely on the automask + * to hold pending events for us until the interrupt is re-enabled + * + * The itr value is reported in microseconds, and the register + * value is recorded in 2 microsecond units. For this reason we + * only need to shift by the interval shift - 1 instead of the + * full value. + */ + itr &= I40E_ITR_MASK; + + val = I40E_PFINT_DYN_CTLN_INTENA_MASK | + (type << I40E_PFINT_DYN_CTLN_ITR_INDX_SHIFT) | + (itr << (I40E_PFINT_DYN_CTLN_INTERVAL_SHIFT - 1)); + + return val; +} + +/* a small macro to shorten up some long lines */ +#define INTREG I40E_PFINT_DYN_CTLN + +/* The act of updating the ITR will cause it to immediately trigger. In order + * to prevent this from throwing off adaptive update statistics we defer the + * update so that it can only happen so often. So after either Tx or Rx are + * updated we make the adaptive scheme wait until either the ITR completely + * expires via the next_update expiration or we have been through at least + * 3 interrupts. + */ +#define ITR_COUNTDOWN_START 3 + +/** + * i40e_update_enable_itr - Update itr and re-enable MSIX interrupt + * @vsi: the VSI we care about + * @q_vector: q_vector for which itr is being updated and interrupt enabled + * + **/ +static inline void i40e_update_enable_itr(struct i40e_vsi *vsi, + struct i40e_q_vector *q_vector) +{ + struct i40e_hw *hw = &vsi->back->hw; + u32 intval; + + /* If we don't have MSIX, then we only need to re-enable icr0 */ + if (!(vsi->back->flags & I40E_FLAG_MSIX_ENABLED)) { + i40e_irq_dynamic_enable_icr0(vsi->back); + return; + } + + /* These will do nothing if dynamic updates are not enabled */ + i40e_update_itr(q_vector, &q_vector->tx); + i40e_update_itr(q_vector, &q_vector->rx); + + /* This block of logic allows us to get away with only updating + * one ITR value with each interrupt. The idea is to perform a + * pseudo-lazy update with the following criteria. + * + * 1. Rx is given higher priority than Tx if both are in same state + * 2. If we must reduce an ITR that is given highest priority. + * 3. We then give priority to increasing ITR based on amount. + */ + if (q_vector->rx.target_itr < q_vector->rx.current_itr) { + /* Rx ITR needs to be reduced, this is highest priority */ + intval = i40e_buildreg_itr(I40E_RX_ITR, + q_vector->rx.target_itr); + q_vector->rx.current_itr = q_vector->rx.target_itr; + q_vector->itr_countdown = ITR_COUNTDOWN_START; + } else if ((q_vector->tx.target_itr < q_vector->tx.current_itr) || + ((q_vector->rx.target_itr - q_vector->rx.current_itr) < + (q_vector->tx.target_itr - q_vector->tx.current_itr))) { + /* Tx ITR needs to be reduced, this is second priority + * Tx ITR needs to be increased more than Rx, fourth priority + */ + intval = i40e_buildreg_itr(I40E_TX_ITR, + q_vector->tx.target_itr); + q_vector->tx.current_itr = q_vector->tx.target_itr; + q_vector->itr_countdown = ITR_COUNTDOWN_START; + } else if (q_vector->rx.current_itr != q_vector->rx.target_itr) { + /* Rx ITR needs to be increased, third priority */ + intval = i40e_buildreg_itr(I40E_RX_ITR, + q_vector->rx.target_itr); + q_vector->rx.current_itr = q_vector->rx.target_itr; + q_vector->itr_countdown = ITR_COUNTDOWN_START; + } else { + /* No ITR update, lowest priority */ + intval = i40e_buildreg_itr(I40E_ITR_NONE, 0); + if (q_vector->itr_countdown) + q_vector->itr_countdown--; + } + + if (!test_bit(__I40E_VSI_DOWN, vsi->state)) + wr32(hw, INTREG(q_vector->reg_idx), intval); +} + +/** + * i40e_napi_poll - NAPI polling Rx/Tx cleanup routine + * @napi: napi struct with our devices info in it + * @budget: amount of work driver is allowed to do this pass, in packets + * + * This function will clean all queues associated with a q_vector. + * + * Returns the amount of work done + **/ +int i40e_napi_poll(struct napi_struct *napi, int budget) +{ + struct i40e_q_vector *q_vector = + container_of(napi, struct i40e_q_vector, napi); + struct i40e_vsi *vsi = q_vector->vsi; + struct i40e_ring *ring; + bool tx_clean_complete = true; + bool rx_clean_complete = true; + unsigned int tx_cleaned = 0; + unsigned int rx_cleaned = 0; + bool clean_complete = true; + bool arm_wb = false; + int budget_per_ring; + int work_done = 0; + + if (test_bit(__I40E_VSI_DOWN, vsi->state)) { + napi_complete(napi); + return 0; + } + + /* Since the actual Tx work is minimal, we can give the Tx a larger + * budget and be more aggressive about cleaning up the Tx descriptors. + */ + i40e_for_each_ring(ring, q_vector->tx) { + bool wd = ring->xsk_pool ? + i40e_clean_xdp_tx_irq(vsi, ring) : + i40e_clean_tx_irq(vsi, ring, budget, &tx_cleaned); + + if (!wd) { + clean_complete = tx_clean_complete = false; + continue; + } + arm_wb |= ring->arm_wb; + ring->arm_wb = false; + } + + /* Handle case where we are called by netpoll with a budget of 0 */ + if (budget <= 0) + goto tx_only; + + /* normally we have 1 Rx ring per q_vector */ + if (unlikely(q_vector->num_ringpairs > 1)) + /* We attempt to distribute budget to each Rx queue fairly, but + * don't allow the budget to go below 1 because that would exit + * polling early. + */ + budget_per_ring = max_t(int, budget / q_vector->num_ringpairs, 1); + else + /* Max of 1 Rx ring in this q_vector so give it the budget */ + budget_per_ring = budget; + + i40e_for_each_ring(ring, q_vector->rx) { + int cleaned = ring->xsk_pool ? + i40e_clean_rx_irq_zc(ring, budget_per_ring) : + i40e_clean_rx_irq(ring, budget_per_ring, &rx_cleaned); + + work_done += cleaned; + /* if we clean as many as budgeted, we must not be done */ + if (cleaned >= budget_per_ring) + clean_complete = rx_clean_complete = false; + } + + if (!i40e_enabled_xdp_vsi(vsi)) + trace_i40e_napi_poll(napi, q_vector, budget, budget_per_ring, rx_cleaned, + tx_cleaned, rx_clean_complete, tx_clean_complete); + + /* If work not completed, return budget and polling will return */ + if (!clean_complete) { + int cpu_id = smp_processor_id(); + + /* It is possible that the interrupt affinity has changed but, + * if the cpu is pegged at 100%, polling will never exit while + * traffic continues and the interrupt will be stuck on this + * cpu. We check to make sure affinity is correct before we + * continue to poll, otherwise we must stop polling so the + * interrupt can move to the correct cpu. + */ + if (!cpumask_test_cpu(cpu_id, &q_vector->affinity_mask)) { + /* Tell napi that we are done polling */ + napi_complete_done(napi, work_done); + + /* Force an interrupt */ + i40e_force_wb(vsi, q_vector); + + /* Return budget-1 so that polling stops */ + return budget - 1; + } +tx_only: + if (arm_wb) { + q_vector->tx.ring[0].tx_stats.tx_force_wb++; + i40e_enable_wb_on_itr(vsi, q_vector); + } + return budget; + } + + if (q_vector->tx.ring[0].flags & I40E_TXR_FLAGS_WB_ON_ITR) + q_vector->arm_wb_state = false; + + /* Exit the polling mode, but don't re-enable interrupts if stack might + * poll us due to busy-polling + */ + if (likely(napi_complete_done(napi, work_done))) + i40e_update_enable_itr(vsi, q_vector); + + return min(work_done, budget - 1); +} + +/** + * i40e_atr - Add a Flow Director ATR filter + * @tx_ring: ring to add programming descriptor to + * @skb: send buffer + * @tx_flags: send tx flags + **/ +static void i40e_atr(struct i40e_ring *tx_ring, struct sk_buff *skb, + u32 tx_flags) +{ + struct i40e_filter_program_desc *fdir_desc; + struct i40e_pf *pf = tx_ring->vsi->back; + union { + unsigned char *network; + struct iphdr *ipv4; + struct ipv6hdr *ipv6; + } hdr; + struct tcphdr *th; + unsigned int hlen; + u32 flex_ptype, dtype_cmd; + int l4_proto; + u16 i; + + /* make sure ATR is enabled */ + if (!(pf->flags & I40E_FLAG_FD_ATR_ENABLED)) + return; + + if (test_bit(__I40E_FD_ATR_AUTO_DISABLED, pf->state)) + return; + + /* if sampling is disabled do nothing */ + if (!tx_ring->atr_sample_rate) + return; + + /* Currently only IPv4/IPv6 with TCP is supported */ + if (!(tx_flags & (I40E_TX_FLAGS_IPV4 | I40E_TX_FLAGS_IPV6))) + return; + + /* snag network header to get L4 type and address */ + hdr.network = (tx_flags & I40E_TX_FLAGS_UDP_TUNNEL) ? + skb_inner_network_header(skb) : skb_network_header(skb); + + /* Note: tx_flags gets modified to reflect inner protocols in + * tx_enable_csum function if encap is enabled. + */ + if (tx_flags & I40E_TX_FLAGS_IPV4) { + /* access ihl as u8 to avoid unaligned access on ia64 */ + hlen = (hdr.network[0] & 0x0F) << 2; + l4_proto = hdr.ipv4->protocol; + } else { + /* find the start of the innermost ipv6 header */ + unsigned int inner_hlen = hdr.network - skb->data; + unsigned int h_offset = inner_hlen; + + /* this function updates h_offset to the end of the header */ + l4_proto = + ipv6_find_hdr(skb, &h_offset, IPPROTO_TCP, NULL, NULL); + /* hlen will contain our best estimate of the tcp header */ + hlen = h_offset - inner_hlen; + } + + if (l4_proto != IPPROTO_TCP) + return; + + th = (struct tcphdr *)(hdr.network + hlen); + + /* Due to lack of space, no more new filters can be programmed */ + if (th->syn && test_bit(__I40E_FD_ATR_AUTO_DISABLED, pf->state)) + return; + if (pf->flags & I40E_FLAG_HW_ATR_EVICT_ENABLED) { + /* HW ATR eviction will take care of removing filters on FIN + * and RST packets. + */ + if (th->fin || th->rst) + return; + } + + tx_ring->atr_count++; + + /* sample on all syn/fin/rst packets or once every atr sample rate */ + if (!th->fin && + !th->syn && + !th->rst && + (tx_ring->atr_count < tx_ring->atr_sample_rate)) + return; + + tx_ring->atr_count = 0; + + /* grab the next descriptor */ + i = tx_ring->next_to_use; + fdir_desc = I40E_TX_FDIRDESC(tx_ring, i); + + i++; + tx_ring->next_to_use = (i < tx_ring->count) ? i : 0; + + flex_ptype = (tx_ring->queue_index << I40E_TXD_FLTR_QW0_QINDEX_SHIFT) & + I40E_TXD_FLTR_QW0_QINDEX_MASK; + flex_ptype |= (tx_flags & I40E_TX_FLAGS_IPV4) ? + (I40E_FILTER_PCTYPE_NONF_IPV4_TCP << + I40E_TXD_FLTR_QW0_PCTYPE_SHIFT) : + (I40E_FILTER_PCTYPE_NONF_IPV6_TCP << + I40E_TXD_FLTR_QW0_PCTYPE_SHIFT); + + flex_ptype |= tx_ring->vsi->id << I40E_TXD_FLTR_QW0_DEST_VSI_SHIFT; + + dtype_cmd = I40E_TX_DESC_DTYPE_FILTER_PROG; + + dtype_cmd |= (th->fin || th->rst) ? + (I40E_FILTER_PROGRAM_DESC_PCMD_REMOVE << + I40E_TXD_FLTR_QW1_PCMD_SHIFT) : + (I40E_FILTER_PROGRAM_DESC_PCMD_ADD_UPDATE << + I40E_TXD_FLTR_QW1_PCMD_SHIFT); + + dtype_cmd |= I40E_FILTER_PROGRAM_DESC_DEST_DIRECT_PACKET_QINDEX << + I40E_TXD_FLTR_QW1_DEST_SHIFT; + + dtype_cmd |= I40E_FILTER_PROGRAM_DESC_FD_STATUS_FD_ID << + I40E_TXD_FLTR_QW1_FD_STATUS_SHIFT; + + dtype_cmd |= I40E_TXD_FLTR_QW1_CNT_ENA_MASK; + if (!(tx_flags & I40E_TX_FLAGS_UDP_TUNNEL)) + dtype_cmd |= + ((u32)I40E_FD_ATR_STAT_IDX(pf->hw.pf_id) << + I40E_TXD_FLTR_QW1_CNTINDEX_SHIFT) & + I40E_TXD_FLTR_QW1_CNTINDEX_MASK; + else + dtype_cmd |= + ((u32)I40E_FD_ATR_TUNNEL_STAT_IDX(pf->hw.pf_id) << + I40E_TXD_FLTR_QW1_CNTINDEX_SHIFT) & + I40E_TXD_FLTR_QW1_CNTINDEX_MASK; + + if (pf->flags & I40E_FLAG_HW_ATR_EVICT_ENABLED) + dtype_cmd |= I40E_TXD_FLTR_QW1_ATR_MASK; + + fdir_desc->qindex_flex_ptype_vsi = cpu_to_le32(flex_ptype); + fdir_desc->rsvd = cpu_to_le32(0); + fdir_desc->dtype_cmd_cntindex = cpu_to_le32(dtype_cmd); + fdir_desc->fd_id = cpu_to_le32(0); +} + +/** + * i40e_tx_prepare_vlan_flags - prepare generic TX VLAN tagging flags for HW + * @skb: send buffer + * @tx_ring: ring to send buffer on + * @flags: the tx flags to be set + * + * Checks the skb and set up correspondingly several generic transmit flags + * related to VLAN tagging for the HW, such as VLAN, DCB, etc. + * + * Returns error code indicate the frame should be dropped upon error and the + * otherwise returns 0 to indicate the flags has been set properly. + **/ +static inline int i40e_tx_prepare_vlan_flags(struct sk_buff *skb, + struct i40e_ring *tx_ring, + u32 *flags) +{ + __be16 protocol = skb->protocol; + u32 tx_flags = 0; + + if (protocol == htons(ETH_P_8021Q) && + !(tx_ring->netdev->features & NETIF_F_HW_VLAN_CTAG_TX)) { + /* When HW VLAN acceleration is turned off by the user the + * stack sets the protocol to 8021q so that the driver + * can take any steps required to support the SW only + * VLAN handling. In our case the driver doesn't need + * to take any further steps so just set the protocol + * to the encapsulated ethertype. + */ + skb->protocol = vlan_get_protocol(skb); + goto out; + } + + /* if we have a HW VLAN tag being added, default to the HW one */ + if (skb_vlan_tag_present(skb)) { + tx_flags |= skb_vlan_tag_get(skb) << I40E_TX_FLAGS_VLAN_SHIFT; + tx_flags |= I40E_TX_FLAGS_HW_VLAN; + /* else if it is a SW VLAN, check the next protocol and store the tag */ + } else if (protocol == htons(ETH_P_8021Q)) { + struct vlan_hdr *vhdr, _vhdr; + + vhdr = skb_header_pointer(skb, ETH_HLEN, sizeof(_vhdr), &_vhdr); + if (!vhdr) + return -EINVAL; + + protocol = vhdr->h_vlan_encapsulated_proto; + tx_flags |= ntohs(vhdr->h_vlan_TCI) << I40E_TX_FLAGS_VLAN_SHIFT; + tx_flags |= I40E_TX_FLAGS_SW_VLAN; + } + + if (!(tx_ring->vsi->back->flags & I40E_FLAG_DCB_ENABLED)) + goto out; + + /* Insert 802.1p priority into VLAN header */ + if ((tx_flags & (I40E_TX_FLAGS_HW_VLAN | I40E_TX_FLAGS_SW_VLAN)) || + (skb->priority != TC_PRIO_CONTROL)) { + tx_flags &= ~I40E_TX_FLAGS_VLAN_PRIO_MASK; + tx_flags |= (skb->priority & 0x7) << + I40E_TX_FLAGS_VLAN_PRIO_SHIFT; + if (tx_flags & I40E_TX_FLAGS_SW_VLAN) { + struct vlan_ethhdr *vhdr; + int rc; + + rc = skb_cow_head(skb, 0); + if (rc < 0) + return rc; + vhdr = skb_vlan_eth_hdr(skb); + vhdr->h_vlan_TCI = htons(tx_flags >> + I40E_TX_FLAGS_VLAN_SHIFT); + } else { + tx_flags |= I40E_TX_FLAGS_HW_VLAN; + } + } + +out: + *flags = tx_flags; + return 0; +} + +/** + * i40e_tso - set up the tso context descriptor + * @first: pointer to first Tx buffer for xmit + * @hdr_len: ptr to the size of the packet header + * @cd_type_cmd_tso_mss: Quad Word 1 + * + * Returns 0 if no TSO can happen, 1 if tso is going, or error + **/ +static int i40e_tso(struct i40e_tx_buffer *first, u8 *hdr_len, + u64 *cd_type_cmd_tso_mss) +{ + struct sk_buff *skb = first->skb; + u64 cd_cmd, cd_tso_len, cd_mss; + __be16 protocol; + union { + struct iphdr *v4; + struct ipv6hdr *v6; + unsigned char *hdr; + } ip; + union { + struct tcphdr *tcp; + struct udphdr *udp; + unsigned char *hdr; + } l4; + u32 paylen, l4_offset; + u16 gso_size; + int err; + + if (skb->ip_summed != CHECKSUM_PARTIAL) + return 0; + + if (!skb_is_gso(skb)) + return 0; + + err = skb_cow_head(skb, 0); + if (err < 0) + return err; + + protocol = vlan_get_protocol(skb); + + if (eth_p_mpls(protocol)) + ip.hdr = skb_inner_network_header(skb); + else + ip.hdr = skb_network_header(skb); + l4.hdr = skb_checksum_start(skb); + + /* initialize outer IP header fields */ + if (ip.v4->version == 4) { + ip.v4->tot_len = 0; + ip.v4->check = 0; + + first->tx_flags |= I40E_TX_FLAGS_TSO; + } else { + ip.v6->payload_len = 0; + first->tx_flags |= I40E_TX_FLAGS_TSO; + } + + if (skb_shinfo(skb)->gso_type & (SKB_GSO_GRE | + SKB_GSO_GRE_CSUM | + SKB_GSO_IPXIP4 | + SKB_GSO_IPXIP6 | + SKB_GSO_UDP_TUNNEL | + SKB_GSO_UDP_TUNNEL_CSUM)) { + if (!(skb_shinfo(skb)->gso_type & SKB_GSO_PARTIAL) && + (skb_shinfo(skb)->gso_type & SKB_GSO_UDP_TUNNEL_CSUM)) { + l4.udp->len = 0; + + /* determine offset of outer transport header */ + l4_offset = l4.hdr - skb->data; + + /* remove payload length from outer checksum */ + paylen = skb->len - l4_offset; + csum_replace_by_diff(&l4.udp->check, + (__force __wsum)htonl(paylen)); + } + + /* reset pointers to inner headers */ + ip.hdr = skb_inner_network_header(skb); + l4.hdr = skb_inner_transport_header(skb); + + /* initialize inner IP header fields */ + if (ip.v4->version == 4) { + ip.v4->tot_len = 0; + ip.v4->check = 0; + } else { + ip.v6->payload_len = 0; + } + } + + /* determine offset of inner transport header */ + l4_offset = l4.hdr - skb->data; + + /* remove payload length from inner checksum */ + paylen = skb->len - l4_offset; + + if (skb_shinfo(skb)->gso_type & SKB_GSO_UDP_L4) { + csum_replace_by_diff(&l4.udp->check, (__force __wsum)htonl(paylen)); + /* compute length of segmentation header */ + *hdr_len = sizeof(*l4.udp) + l4_offset; + } else { + csum_replace_by_diff(&l4.tcp->check, (__force __wsum)htonl(paylen)); + /* compute length of segmentation header */ + *hdr_len = (l4.tcp->doff * 4) + l4_offset; + } + + /* pull values out of skb_shinfo */ + gso_size = skb_shinfo(skb)->gso_size; + + /* update GSO size and bytecount with header size */ + first->gso_segs = skb_shinfo(skb)->gso_segs; + first->bytecount += (first->gso_segs - 1) * *hdr_len; + + /* find the field values */ + cd_cmd = I40E_TX_CTX_DESC_TSO; + cd_tso_len = skb->len - *hdr_len; + cd_mss = gso_size; + *cd_type_cmd_tso_mss |= (cd_cmd << I40E_TXD_CTX_QW1_CMD_SHIFT) | + (cd_tso_len << I40E_TXD_CTX_QW1_TSO_LEN_SHIFT) | + (cd_mss << I40E_TXD_CTX_QW1_MSS_SHIFT); + return 1; +} + +/** + * i40e_tsyn - set up the tsyn context descriptor + * @tx_ring: ptr to the ring to send + * @skb: ptr to the skb we're sending + * @tx_flags: the collected send information + * @cd_type_cmd_tso_mss: Quad Word 1 + * + * Returns 0 if no Tx timestamp can happen and 1 if the timestamp will happen + **/ +static int i40e_tsyn(struct i40e_ring *tx_ring, struct sk_buff *skb, + u32 tx_flags, u64 *cd_type_cmd_tso_mss) +{ + struct i40e_pf *pf; + + if (likely(!(skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP))) + return 0; + + /* Tx timestamps cannot be sampled when doing TSO */ + if (tx_flags & I40E_TX_FLAGS_TSO) + return 0; + + /* only timestamp the outbound packet if the user has requested it and + * we are not already transmitting a packet to be timestamped + */ + pf = i40e_netdev_to_pf(tx_ring->netdev); + if (!(pf->flags & I40E_FLAG_PTP)) + return 0; + + if (pf->ptp_tx && + !test_and_set_bit_lock(__I40E_PTP_TX_IN_PROGRESS, pf->state)) { + skb_shinfo(skb)->tx_flags |= SKBTX_IN_PROGRESS; + pf->ptp_tx_start = jiffies; + pf->ptp_tx_skb = skb_get(skb); + } else { + pf->tx_hwtstamp_skipped++; + return 0; + } + + *cd_type_cmd_tso_mss |= (u64)I40E_TX_CTX_DESC_TSYN << + I40E_TXD_CTX_QW1_CMD_SHIFT; + + return 1; +} + +/** + * i40e_tx_enable_csum - Enable Tx checksum offloads + * @skb: send buffer + * @tx_flags: pointer to Tx flags currently set + * @td_cmd: Tx descriptor command bits to set + * @td_offset: Tx descriptor header offsets to set + * @tx_ring: Tx descriptor ring + * @cd_tunneling: ptr to context desc bits + **/ +static int i40e_tx_enable_csum(struct sk_buff *skb, u32 *tx_flags, + u32 *td_cmd, u32 *td_offset, + struct i40e_ring *tx_ring, + u32 *cd_tunneling) +{ + union { + struct iphdr *v4; + struct ipv6hdr *v6; + unsigned char *hdr; + } ip; + union { + struct tcphdr *tcp; + struct udphdr *udp; + unsigned char *hdr; + } l4; + unsigned char *exthdr; + u32 offset, cmd = 0; + __be16 frag_off; + __be16 protocol; + u8 l4_proto = 0; + + if (skb->ip_summed != CHECKSUM_PARTIAL) + return 0; + + protocol = vlan_get_protocol(skb); + + if (eth_p_mpls(protocol)) { + ip.hdr = skb_inner_network_header(skb); + l4.hdr = skb_checksum_start(skb); + } else { + ip.hdr = skb_network_header(skb); + l4.hdr = skb_transport_header(skb); + } + + /* set the tx_flags to indicate the IP protocol type. this is + * required so that checksum header computation below is accurate. + */ + if (ip.v4->version == 4) + *tx_flags |= I40E_TX_FLAGS_IPV4; + else + *tx_flags |= I40E_TX_FLAGS_IPV6; + + /* compute outer L2 header size */ + offset = ((ip.hdr - skb->data) / 2) << I40E_TX_DESC_LENGTH_MACLEN_SHIFT; + + if (skb->encapsulation) { + u32 tunnel = 0; + /* define outer network header type */ + if (*tx_flags & I40E_TX_FLAGS_IPV4) { + tunnel |= (*tx_flags & I40E_TX_FLAGS_TSO) ? + I40E_TX_CTX_EXT_IP_IPV4 : + I40E_TX_CTX_EXT_IP_IPV4_NO_CSUM; + + l4_proto = ip.v4->protocol; + } else if (*tx_flags & I40E_TX_FLAGS_IPV6) { + int ret; + + tunnel |= I40E_TX_CTX_EXT_IP_IPV6; + + exthdr = ip.hdr + sizeof(*ip.v6); + l4_proto = ip.v6->nexthdr; + ret = ipv6_skip_exthdr(skb, exthdr - skb->data, + &l4_proto, &frag_off); + if (ret < 0) + return -1; + } + + /* define outer transport */ + switch (l4_proto) { + case IPPROTO_UDP: + tunnel |= I40E_TXD_CTX_UDP_TUNNELING; + *tx_flags |= I40E_TX_FLAGS_UDP_TUNNEL; + break; + case IPPROTO_GRE: + tunnel |= I40E_TXD_CTX_GRE_TUNNELING; + *tx_flags |= I40E_TX_FLAGS_UDP_TUNNEL; + break; + case IPPROTO_IPIP: + case IPPROTO_IPV6: + *tx_flags |= I40E_TX_FLAGS_UDP_TUNNEL; + l4.hdr = skb_inner_network_header(skb); + break; + default: + if (*tx_flags & I40E_TX_FLAGS_TSO) + return -1; + + skb_checksum_help(skb); + return 0; + } + + /* compute outer L3 header size */ + tunnel |= ((l4.hdr - ip.hdr) / 4) << + I40E_TXD_CTX_QW0_EXT_IPLEN_SHIFT; + + /* switch IP header pointer from outer to inner header */ + ip.hdr = skb_inner_network_header(skb); + + /* compute tunnel header size */ + tunnel |= ((ip.hdr - l4.hdr) / 2) << + I40E_TXD_CTX_QW0_NATLEN_SHIFT; + + /* indicate if we need to offload outer UDP header */ + if ((*tx_flags & I40E_TX_FLAGS_TSO) && + !(skb_shinfo(skb)->gso_type & SKB_GSO_PARTIAL) && + (skb_shinfo(skb)->gso_type & SKB_GSO_UDP_TUNNEL_CSUM)) + tunnel |= I40E_TXD_CTX_QW0_L4T_CS_MASK; + + /* record tunnel offload values */ + *cd_tunneling |= tunnel; + + /* switch L4 header pointer from outer to inner */ + l4.hdr = skb_inner_transport_header(skb); + l4_proto = 0; + + /* reset type as we transition from outer to inner headers */ + *tx_flags &= ~(I40E_TX_FLAGS_IPV4 | I40E_TX_FLAGS_IPV6); + if (ip.v4->version == 4) + *tx_flags |= I40E_TX_FLAGS_IPV4; + if (ip.v6->version == 6) + *tx_flags |= I40E_TX_FLAGS_IPV6; + } + + /* Enable IP checksum offloads */ + if (*tx_flags & I40E_TX_FLAGS_IPV4) { + l4_proto = ip.v4->protocol; + /* the stack computes the IP header already, the only time we + * need the hardware to recompute it is in the case of TSO. + */ + cmd |= (*tx_flags & I40E_TX_FLAGS_TSO) ? + I40E_TX_DESC_CMD_IIPT_IPV4_CSUM : + I40E_TX_DESC_CMD_IIPT_IPV4; + } else if (*tx_flags & I40E_TX_FLAGS_IPV6) { + cmd |= I40E_TX_DESC_CMD_IIPT_IPV6; + + exthdr = ip.hdr + sizeof(*ip.v6); + l4_proto = ip.v6->nexthdr; + if (l4.hdr != exthdr) + ipv6_skip_exthdr(skb, exthdr - skb->data, + &l4_proto, &frag_off); + } + + /* compute inner L3 header size */ + offset |= ((l4.hdr - ip.hdr) / 4) << I40E_TX_DESC_LENGTH_IPLEN_SHIFT; + + /* Enable L4 checksum offloads */ + switch (l4_proto) { + case IPPROTO_TCP: + /* enable checksum offloads */ + cmd |= I40E_TX_DESC_CMD_L4T_EOFT_TCP; + offset |= l4.tcp->doff << I40E_TX_DESC_LENGTH_L4_FC_LEN_SHIFT; + break; + case IPPROTO_SCTP: + /* enable SCTP checksum offload */ + cmd |= I40E_TX_DESC_CMD_L4T_EOFT_SCTP; + offset |= (sizeof(struct sctphdr) >> 2) << + I40E_TX_DESC_LENGTH_L4_FC_LEN_SHIFT; + break; + case IPPROTO_UDP: + /* enable UDP checksum offload */ + cmd |= I40E_TX_DESC_CMD_L4T_EOFT_UDP; + offset |= (sizeof(struct udphdr) >> 2) << + I40E_TX_DESC_LENGTH_L4_FC_LEN_SHIFT; + break; + default: + if (*tx_flags & I40E_TX_FLAGS_TSO) + return -1; + skb_checksum_help(skb); + return 0; + } + + *td_cmd |= cmd; + *td_offset |= offset; + + return 1; +} + +/** + * i40e_create_tx_ctx - Build the Tx context descriptor + * @tx_ring: ring to create the descriptor on + * @cd_type_cmd_tso_mss: Quad Word 1 + * @cd_tunneling: Quad Word 0 - bits 0-31 + * @cd_l2tag2: Quad Word 0 - bits 32-63 + **/ +static void i40e_create_tx_ctx(struct i40e_ring *tx_ring, + const u64 cd_type_cmd_tso_mss, + const u32 cd_tunneling, const u32 cd_l2tag2) +{ + struct i40e_tx_context_desc *context_desc; + int i = tx_ring->next_to_use; + + if ((cd_type_cmd_tso_mss == I40E_TX_DESC_DTYPE_CONTEXT) && + !cd_tunneling && !cd_l2tag2) + return; + + /* grab the next descriptor */ + context_desc = I40E_TX_CTXTDESC(tx_ring, i); + + i++; + tx_ring->next_to_use = (i < tx_ring->count) ? i : 0; + + /* cpu_to_le32 and assign to struct fields */ + context_desc->tunneling_params = cpu_to_le32(cd_tunneling); + context_desc->l2tag2 = cpu_to_le16(cd_l2tag2); + context_desc->rsvd = cpu_to_le16(0); + context_desc->type_cmd_tso_mss = cpu_to_le64(cd_type_cmd_tso_mss); +} + +/** + * __i40e_maybe_stop_tx - 2nd level check for tx stop conditions + * @tx_ring: the ring to be checked + * @size: the size buffer we want to assure is available + * + * Returns -EBUSY if a stop is needed, else 0 + **/ +int __i40e_maybe_stop_tx(struct i40e_ring *tx_ring, int size) +{ + netif_stop_subqueue(tx_ring->netdev, tx_ring->queue_index); + /* Memory barrier before checking head and tail */ + smp_mb(); + + ++tx_ring->tx_stats.tx_stopped; + + /* Check again in a case another CPU has just made room available. */ + if (likely(I40E_DESC_UNUSED(tx_ring) < size)) + return -EBUSY; + + /* A reprieve! - use start_queue because it doesn't call schedule */ + netif_start_subqueue(tx_ring->netdev, tx_ring->queue_index); + ++tx_ring->tx_stats.restart_queue; + return 0; +} + +/** + * __i40e_chk_linearize - Check if there are more than 8 buffers per packet + * @skb: send buffer + * + * Note: Our HW can't DMA more than 8 buffers to build a packet on the wire + * and so we need to figure out the cases where we need to linearize the skb. + * + * For TSO we need to count the TSO header and segment payload separately. + * As such we need to check cases where we have 7 fragments or more as we + * can potentially require 9 DMA transactions, 1 for the TSO header, 1 for + * the segment payload in the first descriptor, and another 7 for the + * fragments. + **/ +bool __i40e_chk_linearize(struct sk_buff *skb) +{ + const skb_frag_t *frag, *stale; + int nr_frags, sum; + + /* no need to check if number of frags is less than 7 */ + nr_frags = skb_shinfo(skb)->nr_frags; + if (nr_frags < (I40E_MAX_BUFFER_TXD - 1)) + return false; + + /* We need to walk through the list and validate that each group + * of 6 fragments totals at least gso_size. + */ + nr_frags -= I40E_MAX_BUFFER_TXD - 2; + frag = &skb_shinfo(skb)->frags[0]; + + /* Initialize size to the negative value of gso_size minus 1. We + * use this as the worst case scenerio in which the frag ahead + * of us only provides one byte which is why we are limited to 6 + * descriptors for a single transmit as the header and previous + * fragment are already consuming 2 descriptors. + */ + sum = 1 - skb_shinfo(skb)->gso_size; + + /* Add size of frags 0 through 4 to create our initial sum */ + sum += skb_frag_size(frag++); + sum += skb_frag_size(frag++); + sum += skb_frag_size(frag++); + sum += skb_frag_size(frag++); + sum += skb_frag_size(frag++); + + /* Walk through fragments adding latest fragment, testing it, and + * then removing stale fragments from the sum. + */ + for (stale = &skb_shinfo(skb)->frags[0];; stale++) { + int stale_size = skb_frag_size(stale); + + sum += skb_frag_size(frag++); + + /* The stale fragment may present us with a smaller + * descriptor than the actual fragment size. To account + * for that we need to remove all the data on the front and + * figure out what the remainder would be in the last + * descriptor associated with the fragment. + */ + if (stale_size > I40E_MAX_DATA_PER_TXD) { + int align_pad = -(skb_frag_off(stale)) & + (I40E_MAX_READ_REQ_SIZE - 1); + + sum -= align_pad; + stale_size -= align_pad; + + do { + sum -= I40E_MAX_DATA_PER_TXD_ALIGNED; + stale_size -= I40E_MAX_DATA_PER_TXD_ALIGNED; + } while (stale_size > I40E_MAX_DATA_PER_TXD); + } + + /* if sum is negative we failed to make sufficient progress */ + if (sum < 0) + return true; + + if (!nr_frags--) + break; + + sum -= stale_size; + } + + return false; +} + +/** + * i40e_tx_map - Build the Tx descriptor + * @tx_ring: ring to send buffer on + * @skb: send buffer + * @first: first buffer info buffer to use + * @tx_flags: collected send information + * @hdr_len: size of the packet header + * @td_cmd: the command field in the descriptor + * @td_offset: offset for checksum or crc + * + * Returns 0 on success, -1 on failure to DMA + **/ +static inline int i40e_tx_map(struct i40e_ring *tx_ring, struct sk_buff *skb, + struct i40e_tx_buffer *first, u32 tx_flags, + const u8 hdr_len, u32 td_cmd, u32 td_offset) +{ + unsigned int data_len = skb->data_len; + unsigned int size = skb_headlen(skb); + skb_frag_t *frag; + struct i40e_tx_buffer *tx_bi; + struct i40e_tx_desc *tx_desc; + u16 i = tx_ring->next_to_use; + u32 td_tag = 0; + dma_addr_t dma; + u16 desc_count = 1; + + if (tx_flags & I40E_TX_FLAGS_HW_VLAN) { + td_cmd |= I40E_TX_DESC_CMD_IL2TAG1; + td_tag = (tx_flags & I40E_TX_FLAGS_VLAN_MASK) >> + I40E_TX_FLAGS_VLAN_SHIFT; + } + + first->tx_flags = tx_flags; + + dma = dma_map_single(tx_ring->dev, skb->data, size, DMA_TO_DEVICE); + + tx_desc = I40E_TX_DESC(tx_ring, i); + tx_bi = first; + + for (frag = &skb_shinfo(skb)->frags[0];; frag++) { + unsigned int max_data = I40E_MAX_DATA_PER_TXD_ALIGNED; + + if (dma_mapping_error(tx_ring->dev, dma)) + goto dma_error; + + /* record length, and DMA address */ + dma_unmap_len_set(tx_bi, len, size); + dma_unmap_addr_set(tx_bi, dma, dma); + + /* align size to end of page */ + max_data += -dma & (I40E_MAX_READ_REQ_SIZE - 1); + tx_desc->buffer_addr = cpu_to_le64(dma); + + while (unlikely(size > I40E_MAX_DATA_PER_TXD)) { + tx_desc->cmd_type_offset_bsz = + build_ctob(td_cmd, td_offset, + max_data, td_tag); + + tx_desc++; + i++; + desc_count++; + + if (i == tx_ring->count) { + tx_desc = I40E_TX_DESC(tx_ring, 0); + i = 0; + } + + dma += max_data; + size -= max_data; + + max_data = I40E_MAX_DATA_PER_TXD_ALIGNED; + tx_desc->buffer_addr = cpu_to_le64(dma); + } + + if (likely(!data_len)) + break; + + tx_desc->cmd_type_offset_bsz = build_ctob(td_cmd, td_offset, + size, td_tag); + + tx_desc++; + i++; + desc_count++; + + if (i == tx_ring->count) { + tx_desc = I40E_TX_DESC(tx_ring, 0); + i = 0; + } + + size = skb_frag_size(frag); + data_len -= size; + + dma = skb_frag_dma_map(tx_ring->dev, frag, 0, size, + DMA_TO_DEVICE); + + tx_bi = &tx_ring->tx_bi[i]; + } + + netdev_tx_sent_queue(txring_txq(tx_ring), first->bytecount); + + i++; + if (i == tx_ring->count) + i = 0; + + tx_ring->next_to_use = i; + + i40e_maybe_stop_tx(tx_ring, DESC_NEEDED); + + /* write last descriptor with EOP bit */ + td_cmd |= I40E_TX_DESC_CMD_EOP; + + /* We OR these values together to check both against 4 (WB_STRIDE) + * below. This is safe since we don't re-use desc_count afterwards. + */ + desc_count |= ++tx_ring->packet_stride; + + if (desc_count >= WB_STRIDE) { + /* write last descriptor with RS bit set */ + td_cmd |= I40E_TX_DESC_CMD_RS; + tx_ring->packet_stride = 0; + } + + tx_desc->cmd_type_offset_bsz = + build_ctob(td_cmd, td_offset, size, td_tag); + + skb_tx_timestamp(skb); + + /* Force memory writes to complete before letting h/w know there + * are new descriptors to fetch. + * + * We also use this memory barrier to make certain all of the + * status bits have been updated before next_to_watch is written. + */ + wmb(); + + /* set next_to_watch value indicating a packet is present */ + first->next_to_watch = tx_desc; + + /* notify HW of packet */ + if (netif_xmit_stopped(txring_txq(tx_ring)) || !netdev_xmit_more()) { + writel(i, tx_ring->tail); + } + + return 0; + +dma_error: + dev_info(tx_ring->dev, "TX DMA map failed\n"); + + /* clear dma mappings for failed tx_bi map */ + for (;;) { + tx_bi = &tx_ring->tx_bi[i]; + i40e_unmap_and_free_tx_resource(tx_ring, tx_bi); + if (tx_bi == first) + break; + if (i == 0) + i = tx_ring->count; + i--; + } + + tx_ring->next_to_use = i; + + return -1; +} + +static u16 i40e_swdcb_skb_tx_hash(struct net_device *dev, + const struct sk_buff *skb, + u16 num_tx_queues) +{ + u32 jhash_initval_salt = 0xd631614b; + u32 hash; + + if (skb->sk && skb->sk->sk_hash) + hash = skb->sk->sk_hash; + else + hash = (__force u16)skb->protocol ^ skb->hash; + + hash = jhash_1word(hash, jhash_initval_salt); + + return (u16)(((u64)hash * num_tx_queues) >> 32); +} + +u16 i40e_lan_select_queue(struct net_device *netdev, + struct sk_buff *skb, + struct net_device __always_unused *sb_dev) +{ + struct i40e_netdev_priv *np = netdev_priv(netdev); + struct i40e_vsi *vsi = np->vsi; + struct i40e_hw *hw; + u16 qoffset; + u16 qcount; + u8 tclass; + u16 hash; + u8 prio; + + /* is DCB enabled at all? */ + if (vsi->tc_config.numtc == 1 || + i40e_is_tc_mqprio_enabled(vsi->back)) + return netdev_pick_tx(netdev, skb, sb_dev); + + prio = skb->priority; + hw = &vsi->back->hw; + tclass = hw->local_dcbx_config.etscfg.prioritytable[prio]; + /* sanity check */ + if (unlikely(!(vsi->tc_config.enabled_tc & BIT(tclass)))) + tclass = 0; + + /* select a queue assigned for the given TC */ + qcount = vsi->tc_config.tc_info[tclass].qcount; + hash = i40e_swdcb_skb_tx_hash(netdev, skb, qcount); + + qoffset = vsi->tc_config.tc_info[tclass].qoffset; + return qoffset + hash; +} + +/** + * i40e_xmit_xdp_ring - transmits an XDP buffer to an XDP Tx ring + * @xdpf: data to transmit + * @xdp_ring: XDP Tx ring + **/ +static int i40e_xmit_xdp_ring(struct xdp_frame *xdpf, + struct i40e_ring *xdp_ring) +{ + struct skb_shared_info *sinfo = xdp_get_shared_info_from_frame(xdpf); + u8 nr_frags = unlikely(xdp_frame_has_frags(xdpf)) ? sinfo->nr_frags : 0; + u16 i = 0, index = xdp_ring->next_to_use; + struct i40e_tx_buffer *tx_head = &xdp_ring->tx_bi[index]; + struct i40e_tx_buffer *tx_bi = tx_head; + struct i40e_tx_desc *tx_desc = I40E_TX_DESC(xdp_ring, index); + void *data = xdpf->data; + u32 size = xdpf->len; + + if (unlikely(I40E_DESC_UNUSED(xdp_ring) < 1 + nr_frags)) { + xdp_ring->tx_stats.tx_busy++; + return I40E_XDP_CONSUMED; + } + + tx_head->bytecount = xdp_get_frame_len(xdpf); + tx_head->gso_segs = 1; + tx_head->xdpf = xdpf; + + for (;;) { + dma_addr_t dma; + + dma = dma_map_single(xdp_ring->dev, data, size, DMA_TO_DEVICE); + if (dma_mapping_error(xdp_ring->dev, dma)) + goto unmap; + + /* record length, and DMA address */ + dma_unmap_len_set(tx_bi, len, size); + dma_unmap_addr_set(tx_bi, dma, dma); + + tx_desc->buffer_addr = cpu_to_le64(dma); + tx_desc->cmd_type_offset_bsz = + build_ctob(I40E_TX_DESC_CMD_ICRC, 0, size, 0); + + if (++index == xdp_ring->count) + index = 0; + + if (i == nr_frags) + break; + + tx_bi = &xdp_ring->tx_bi[index]; + tx_desc = I40E_TX_DESC(xdp_ring, index); + + data = skb_frag_address(&sinfo->frags[i]); + size = skb_frag_size(&sinfo->frags[i]); + i++; + } + + tx_desc->cmd_type_offset_bsz |= + cpu_to_le64(I40E_TXD_CMD << I40E_TXD_QW1_CMD_SHIFT); + + /* Make certain all of the status bits have been updated + * before next_to_watch is written. + */ + smp_wmb(); + + xdp_ring->xdp_tx_active++; + + tx_head->next_to_watch = tx_desc; + xdp_ring->next_to_use = index; + + return I40E_XDP_TX; + +unmap: + for (;;) { + tx_bi = &xdp_ring->tx_bi[index]; + if (dma_unmap_len(tx_bi, len)) + dma_unmap_page(xdp_ring->dev, + dma_unmap_addr(tx_bi, dma), + dma_unmap_len(tx_bi, len), + DMA_TO_DEVICE); + dma_unmap_len_set(tx_bi, len, 0); + if (tx_bi == tx_head) + break; + + if (!index) + index += xdp_ring->count; + index--; + } + + return I40E_XDP_CONSUMED; +} + +/** + * i40e_xmit_frame_ring - Sends buffer on Tx ring + * @skb: send buffer + * @tx_ring: ring to send buffer on + * + * Returns NETDEV_TX_OK if sent, else an error code + **/ +static netdev_tx_t i40e_xmit_frame_ring(struct sk_buff *skb, + struct i40e_ring *tx_ring) +{ + u64 cd_type_cmd_tso_mss = I40E_TX_DESC_DTYPE_CONTEXT; + u32 cd_tunneling = 0, cd_l2tag2 = 0; + struct i40e_tx_buffer *first; + u32 td_offset = 0; + u32 tx_flags = 0; + u32 td_cmd = 0; + u8 hdr_len = 0; + int tso, count; + int tsyn; + + /* prefetch the data, we'll need it later */ + prefetch(skb->data); + + i40e_trace(xmit_frame_ring, skb, tx_ring); + + count = i40e_xmit_descriptor_count(skb); + if (i40e_chk_linearize(skb, count)) { + if (__skb_linearize(skb)) { + dev_kfree_skb_any(skb); + return NETDEV_TX_OK; + } + count = i40e_txd_use_count(skb->len); + tx_ring->tx_stats.tx_linearize++; + } + + /* need: 1 descriptor per page * PAGE_SIZE/I40E_MAX_DATA_PER_TXD, + * + 1 desc for skb_head_len/I40E_MAX_DATA_PER_TXD, + * + 4 desc gap to avoid the cache line where head is, + * + 1 desc for context descriptor, + * otherwise try next time + */ + if (i40e_maybe_stop_tx(tx_ring, count + 4 + 1)) { + tx_ring->tx_stats.tx_busy++; + return NETDEV_TX_BUSY; + } + + /* record the location of the first descriptor for this packet */ + first = &tx_ring->tx_bi[tx_ring->next_to_use]; + first->skb = skb; + first->bytecount = skb->len; + first->gso_segs = 1; + + /* prepare the xmit flags */ + if (i40e_tx_prepare_vlan_flags(skb, tx_ring, &tx_flags)) + goto out_drop; + + tso = i40e_tso(first, &hdr_len, &cd_type_cmd_tso_mss); + + if (tso < 0) + goto out_drop; + else if (tso) + tx_flags |= I40E_TX_FLAGS_TSO; + + /* Always offload the checksum, since it's in the data descriptor */ + tso = i40e_tx_enable_csum(skb, &tx_flags, &td_cmd, &td_offset, + tx_ring, &cd_tunneling); + if (tso < 0) + goto out_drop; + + tsyn = i40e_tsyn(tx_ring, skb, tx_flags, &cd_type_cmd_tso_mss); + + if (tsyn) + tx_flags |= I40E_TX_FLAGS_TSYN; + + /* always enable CRC insertion offload */ + td_cmd |= I40E_TX_DESC_CMD_ICRC; + + i40e_create_tx_ctx(tx_ring, cd_type_cmd_tso_mss, + cd_tunneling, cd_l2tag2); + + /* Add Flow Director ATR if it's enabled. + * + * NOTE: this must always be directly before the data descriptor. + */ + i40e_atr(tx_ring, skb, tx_flags); + + if (i40e_tx_map(tx_ring, skb, first, tx_flags, hdr_len, + td_cmd, td_offset)) + goto cleanup_tx_tstamp; + + return NETDEV_TX_OK; + +out_drop: + i40e_trace(xmit_frame_ring_drop, first->skb, tx_ring); + dev_kfree_skb_any(first->skb); + first->skb = NULL; +cleanup_tx_tstamp: + if (unlikely(tx_flags & I40E_TX_FLAGS_TSYN)) { + struct i40e_pf *pf = i40e_netdev_to_pf(tx_ring->netdev); + + dev_kfree_skb_any(pf->ptp_tx_skb); + pf->ptp_tx_skb = NULL; + clear_bit_unlock(__I40E_PTP_TX_IN_PROGRESS, pf->state); + } + + return NETDEV_TX_OK; +} + +/** + * i40e_lan_xmit_frame - Selects the correct VSI and Tx queue to send buffer + * @skb: send buffer + * @netdev: network interface device structure + * + * Returns NETDEV_TX_OK if sent, else an error code + **/ +netdev_tx_t i40e_lan_xmit_frame(struct sk_buff *skb, struct net_device *netdev) +{ + struct i40e_netdev_priv *np = netdev_priv(netdev); + struct i40e_vsi *vsi = np->vsi; + struct i40e_ring *tx_ring = vsi->tx_rings[skb->queue_mapping]; + + /* hardware can't handle really short frames, hardware padding works + * beyond this point + */ + if (skb_put_padto(skb, I40E_MIN_TX_LEN)) + return NETDEV_TX_OK; + + return i40e_xmit_frame_ring(skb, tx_ring); +} + +/** + * i40e_xdp_xmit - Implements ndo_xdp_xmit + * @dev: netdev + * @n: number of frames + * @frames: array of XDP buffer pointers + * @flags: XDP extra info + * + * Returns number of frames successfully sent. Failed frames + * will be free'ed by XDP core. + * + * For error cases, a negative errno code is returned and no-frames + * are transmitted (caller must handle freeing frames). + **/ +int i40e_xdp_xmit(struct net_device *dev, int n, struct xdp_frame **frames, + u32 flags) +{ + struct i40e_netdev_priv *np = netdev_priv(dev); + unsigned int queue_index = smp_processor_id(); + struct i40e_vsi *vsi = np->vsi; + struct i40e_pf *pf = vsi->back; + struct i40e_ring *xdp_ring; + int nxmit = 0; + int i; + + if (test_bit(__I40E_VSI_DOWN, vsi->state)) + return -ENETDOWN; + + if (!i40e_enabled_xdp_vsi(vsi) || queue_index >= vsi->num_queue_pairs || + test_bit(__I40E_CONFIG_BUSY, pf->state)) + return -ENXIO; + + if (unlikely(flags & ~XDP_XMIT_FLAGS_MASK)) + return -EINVAL; + + xdp_ring = vsi->xdp_rings[queue_index]; + + for (i = 0; i < n; i++) { + struct xdp_frame *xdpf = frames[i]; + int err; + + err = i40e_xmit_xdp_ring(xdpf, xdp_ring); + if (err != I40E_XDP_TX) + break; + nxmit++; + } + + if (unlikely(flags & XDP_XMIT_FLUSH)) + i40e_xdp_ring_update_tail(xdp_ring); + + return nxmit; +} |