diff options
Diffstat (limited to 'drivers/net/ethernet/intel/igbvf/vf.c')
-rw-r--r-- | drivers/net/ethernet/intel/igbvf/vf.c | 430 |
1 files changed, 430 insertions, 0 deletions
diff --git a/drivers/net/ethernet/intel/igbvf/vf.c b/drivers/net/ethernet/intel/igbvf/vf.c new file mode 100644 index 0000000000..a47a2e3e54 --- /dev/null +++ b/drivers/net/ethernet/intel/igbvf/vf.c @@ -0,0 +1,430 @@ +// SPDX-License-Identifier: GPL-2.0 +/* Copyright(c) 2009 - 2018 Intel Corporation. */ + +#include <linux/etherdevice.h> + +#include "vf.h" + +static s32 e1000_check_for_link_vf(struct e1000_hw *hw); +static s32 e1000_get_link_up_info_vf(struct e1000_hw *hw, u16 *speed, + u16 *duplex); +static s32 e1000_init_hw_vf(struct e1000_hw *hw); +static s32 e1000_reset_hw_vf(struct e1000_hw *hw); + +static void e1000_update_mc_addr_list_vf(struct e1000_hw *hw, u8 *, + u32, u32, u32); +static void e1000_rar_set_vf(struct e1000_hw *, u8 *, u32); +static s32 e1000_read_mac_addr_vf(struct e1000_hw *); +static s32 e1000_set_uc_addr_vf(struct e1000_hw *hw, u32 subcmd, u8 *addr); +static s32 e1000_set_vfta_vf(struct e1000_hw *, u16, bool); + +/** + * e1000_init_mac_params_vf - Inits MAC params + * @hw: pointer to the HW structure + **/ +static s32 e1000_init_mac_params_vf(struct e1000_hw *hw) +{ + struct e1000_mac_info *mac = &hw->mac; + + /* VF's have no MTA Registers - PF feature only */ + mac->mta_reg_count = 128; + /* VF's have no access to RAR entries */ + mac->rar_entry_count = 1; + + /* Function pointers */ + /* reset */ + mac->ops.reset_hw = e1000_reset_hw_vf; + /* hw initialization */ + mac->ops.init_hw = e1000_init_hw_vf; + /* check for link */ + mac->ops.check_for_link = e1000_check_for_link_vf; + /* link info */ + mac->ops.get_link_up_info = e1000_get_link_up_info_vf; + /* multicast address update */ + mac->ops.update_mc_addr_list = e1000_update_mc_addr_list_vf; + /* set mac address */ + mac->ops.rar_set = e1000_rar_set_vf; + /* read mac address */ + mac->ops.read_mac_addr = e1000_read_mac_addr_vf; + /* set mac filter */ + mac->ops.set_uc_addr = e1000_set_uc_addr_vf; + /* set vlan filter table array */ + mac->ops.set_vfta = e1000_set_vfta_vf; + + return E1000_SUCCESS; +} + +/** + * e1000_init_function_pointers_vf - Inits function pointers + * @hw: pointer to the HW structure + **/ +void e1000_init_function_pointers_vf(struct e1000_hw *hw) +{ + hw->mac.ops.init_params = e1000_init_mac_params_vf; + hw->mbx.ops.init_params = e1000_init_mbx_params_vf; +} + +/** + * e1000_get_link_up_info_vf - Gets link info. + * @hw: pointer to the HW structure + * @speed: pointer to 16 bit value to store link speed. + * @duplex: pointer to 16 bit value to store duplex. + * + * Since we cannot read the PHY and get accurate link info, we must rely upon + * the status register's data which is often stale and inaccurate. + **/ +static s32 e1000_get_link_up_info_vf(struct e1000_hw *hw, u16 *speed, + u16 *duplex) +{ + s32 status; + + status = er32(STATUS); + if (status & E1000_STATUS_SPEED_1000) + *speed = SPEED_1000; + else if (status & E1000_STATUS_SPEED_100) + *speed = SPEED_100; + else + *speed = SPEED_10; + + if (status & E1000_STATUS_FD) + *duplex = FULL_DUPLEX; + else + *duplex = HALF_DUPLEX; + + return E1000_SUCCESS; +} + +/** + * e1000_reset_hw_vf - Resets the HW + * @hw: pointer to the HW structure + * + * VF's provide a function level reset. This is done using bit 26 of ctrl_reg. + * This is all the reset we can perform on a VF. + **/ +static s32 e1000_reset_hw_vf(struct e1000_hw *hw) +{ + struct e1000_mbx_info *mbx = &hw->mbx; + u32 timeout = E1000_VF_INIT_TIMEOUT; + u32 ret_val = -E1000_ERR_MAC_INIT; + u32 msgbuf[3]; + u8 *addr = (u8 *)(&msgbuf[1]); + u32 ctrl; + + /* assert VF queue/interrupt reset */ + ctrl = er32(CTRL); + ew32(CTRL, ctrl | E1000_CTRL_RST); + + /* we cannot initialize while the RSTI / RSTD bits are asserted */ + while (!mbx->ops.check_for_rst(hw) && timeout) { + timeout--; + udelay(5); + } + + if (timeout) { + /* mailbox timeout can now become active */ + mbx->timeout = E1000_VF_MBX_INIT_TIMEOUT; + + /* notify PF of VF reset completion */ + msgbuf[0] = E1000_VF_RESET; + mbx->ops.write_posted(hw, msgbuf, 1); + + mdelay(10); + + /* set our "perm_addr" based on info provided by PF */ + ret_val = mbx->ops.read_posted(hw, msgbuf, 3); + if (!ret_val) { + switch (msgbuf[0]) { + case E1000_VF_RESET | E1000_VT_MSGTYPE_ACK: + memcpy(hw->mac.perm_addr, addr, ETH_ALEN); + break; + case E1000_VF_RESET | E1000_VT_MSGTYPE_NACK: + eth_zero_addr(hw->mac.perm_addr); + break; + default: + ret_val = -E1000_ERR_MAC_INIT; + } + } + } + + return ret_val; +} + +/** + * e1000_init_hw_vf - Inits the HW + * @hw: pointer to the HW structure + * + * Not much to do here except clear the PF Reset indication if there is one. + **/ +static s32 e1000_init_hw_vf(struct e1000_hw *hw) +{ + /* attempt to set and restore our mac address */ + e1000_rar_set_vf(hw, hw->mac.addr, 0); + + return E1000_SUCCESS; +} + +/** + * e1000_hash_mc_addr_vf - Generate a multicast hash value + * @hw: pointer to the HW structure + * @mc_addr: pointer to a multicast address + * + * Generates a multicast address hash value which is used to determine + * the multicast filter table array address and new table value. See + * e1000_mta_set_generic() + **/ +static u32 e1000_hash_mc_addr_vf(struct e1000_hw *hw, u8 *mc_addr) +{ + u32 hash_value, hash_mask; + u8 bit_shift = 0; + + /* Register count multiplied by bits per register */ + hash_mask = (hw->mac.mta_reg_count * 32) - 1; + + /* The bit_shift is the number of left-shifts + * where 0xFF would still fall within the hash mask. + */ + while (hash_mask >> bit_shift != 0xFF) + bit_shift++; + + hash_value = hash_mask & (((mc_addr[4] >> (8 - bit_shift)) | + (((u16)mc_addr[5]) << bit_shift))); + + return hash_value; +} + +/** + * e1000_update_mc_addr_list_vf - Update Multicast addresses + * @hw: pointer to the HW structure + * @mc_addr_list: array of multicast addresses to program + * @mc_addr_count: number of multicast addresses to program + * @rar_used_count: the first RAR register free to program + * @rar_count: total number of supported Receive Address Registers + * + * Updates the Receive Address Registers and Multicast Table Array. + * The caller must have a packed mc_addr_list of multicast addresses. + * The parameter rar_count will usually be hw->mac.rar_entry_count + * unless there are workarounds that change this. + **/ +static void e1000_update_mc_addr_list_vf(struct e1000_hw *hw, + u8 *mc_addr_list, u32 mc_addr_count, + u32 rar_used_count, u32 rar_count) +{ + struct e1000_mbx_info *mbx = &hw->mbx; + u32 msgbuf[E1000_VFMAILBOX_SIZE]; + u16 *hash_list = (u16 *)&msgbuf[1]; + u32 hash_value; + u32 cnt, i; + s32 ret_val; + + /* Each entry in the list uses 1 16 bit word. We have 30 + * 16 bit words available in our HW msg buffer (minus 1 for the + * msg type). That's 30 hash values if we pack 'em right. If + * there are more than 30 MC addresses to add then punt the + * extras for now and then add code to handle more than 30 later. + * It would be unusual for a server to request that many multi-cast + * addresses except for in large enterprise network environments. + */ + + cnt = (mc_addr_count > 30) ? 30 : mc_addr_count; + msgbuf[0] = E1000_VF_SET_MULTICAST; + msgbuf[0] |= cnt << E1000_VT_MSGINFO_SHIFT; + + for (i = 0; i < cnt; i++) { + hash_value = e1000_hash_mc_addr_vf(hw, mc_addr_list); + hash_list[i] = hash_value & 0x0FFFF; + mc_addr_list += ETH_ALEN; + } + + ret_val = mbx->ops.write_posted(hw, msgbuf, E1000_VFMAILBOX_SIZE); + if (!ret_val) + mbx->ops.read_posted(hw, msgbuf, 1); +} + +/** + * e1000_set_vfta_vf - Set/Unset vlan filter table address + * @hw: pointer to the HW structure + * @vid: determines the vfta register and bit to set/unset + * @set: if true then set bit, else clear bit + **/ +static s32 e1000_set_vfta_vf(struct e1000_hw *hw, u16 vid, bool set) +{ + struct e1000_mbx_info *mbx = &hw->mbx; + u32 msgbuf[2]; + s32 err; + + msgbuf[0] = E1000_VF_SET_VLAN; + msgbuf[1] = vid; + /* Setting the 8 bit field MSG INFO to true indicates "add" */ + if (set) + msgbuf[0] |= BIT(E1000_VT_MSGINFO_SHIFT); + + mbx->ops.write_posted(hw, msgbuf, 2); + + err = mbx->ops.read_posted(hw, msgbuf, 2); + + msgbuf[0] &= ~E1000_VT_MSGTYPE_CTS; + + /* if nacked the vlan was rejected */ + if (!err && (msgbuf[0] == (E1000_VF_SET_VLAN | E1000_VT_MSGTYPE_NACK))) + err = -E1000_ERR_MAC_INIT; + + return err; +} + +/** + * e1000_rlpml_set_vf - Set the maximum receive packet length + * @hw: pointer to the HW structure + * @max_size: value to assign to max frame size + **/ +void e1000_rlpml_set_vf(struct e1000_hw *hw, u16 max_size) +{ + struct e1000_mbx_info *mbx = &hw->mbx; + u32 msgbuf[2]; + s32 ret_val; + + msgbuf[0] = E1000_VF_SET_LPE; + msgbuf[1] = max_size; + + ret_val = mbx->ops.write_posted(hw, msgbuf, 2); + if (!ret_val) + mbx->ops.read_posted(hw, msgbuf, 1); +} + +/** + * e1000_rar_set_vf - set device MAC address + * @hw: pointer to the HW structure + * @addr: pointer to the receive address + * @index: receive address array register + **/ +static void e1000_rar_set_vf(struct e1000_hw *hw, u8 *addr, u32 index) +{ + struct e1000_mbx_info *mbx = &hw->mbx; + u32 msgbuf[3]; + u8 *msg_addr = (u8 *)(&msgbuf[1]); + s32 ret_val; + + memset(msgbuf, 0, 12); + msgbuf[0] = E1000_VF_SET_MAC_ADDR; + memcpy(msg_addr, addr, ETH_ALEN); + ret_val = mbx->ops.write_posted(hw, msgbuf, 3); + + if (!ret_val) + ret_val = mbx->ops.read_posted(hw, msgbuf, 3); + + msgbuf[0] &= ~E1000_VT_MSGTYPE_CTS; + + /* if nacked the address was rejected, use "perm_addr" */ + if (!ret_val && + (msgbuf[0] == (E1000_VF_SET_MAC_ADDR | E1000_VT_MSGTYPE_NACK))) + e1000_read_mac_addr_vf(hw); +} + +/** + * e1000_read_mac_addr_vf - Read device MAC address + * @hw: pointer to the HW structure + **/ +static s32 e1000_read_mac_addr_vf(struct e1000_hw *hw) +{ + memcpy(hw->mac.addr, hw->mac.perm_addr, ETH_ALEN); + + return E1000_SUCCESS; +} + +/** + * e1000_set_uc_addr_vf - Set or clear unicast filters + * @hw: pointer to the HW structure + * @sub_cmd: add or clear filters + * @addr: pointer to the filter MAC address + **/ +static s32 e1000_set_uc_addr_vf(struct e1000_hw *hw, u32 sub_cmd, u8 *addr) +{ + struct e1000_mbx_info *mbx = &hw->mbx; + u32 msgbuf[3], msgbuf_chk; + u8 *msg_addr = (u8 *)(&msgbuf[1]); + s32 ret_val; + + memset(msgbuf, 0, sizeof(msgbuf)); + msgbuf[0] |= sub_cmd; + msgbuf[0] |= E1000_VF_SET_MAC_ADDR; + msgbuf_chk = msgbuf[0]; + + if (addr) + memcpy(msg_addr, addr, ETH_ALEN); + + ret_val = mbx->ops.write_posted(hw, msgbuf, 3); + + if (!ret_val) + ret_val = mbx->ops.read_posted(hw, msgbuf, 3); + + msgbuf[0] &= ~E1000_VT_MSGTYPE_CTS; + + if (!ret_val) { + msgbuf[0] &= ~E1000_VT_MSGTYPE_CTS; + + if (msgbuf[0] == (msgbuf_chk | E1000_VT_MSGTYPE_NACK)) + return -ENOSPC; + } + + return ret_val; +} + +/** + * e1000_check_for_link_vf - Check for link for a virtual interface + * @hw: pointer to the HW structure + * + * Checks to see if the underlying PF is still talking to the VF and + * if it is then it reports the link state to the hardware, otherwise + * it reports link down and returns an error. + **/ +static s32 e1000_check_for_link_vf(struct e1000_hw *hw) +{ + struct e1000_mbx_info *mbx = &hw->mbx; + struct e1000_mac_info *mac = &hw->mac; + s32 ret_val = E1000_SUCCESS; + u32 in_msg = 0; + + /* We only want to run this if there has been a rst asserted. + * in this case that could mean a link change, device reset, + * or a virtual function reset + */ + + /* If we were hit with a reset or timeout drop the link */ + if (!mbx->ops.check_for_rst(hw) || !mbx->timeout) + mac->get_link_status = true; + + if (!mac->get_link_status) + goto out; + + /* if link status is down no point in checking to see if PF is up */ + if (!(er32(STATUS) & E1000_STATUS_LU)) + goto out; + + /* if the read failed it could just be a mailbox collision, best wait + * until we are called again and don't report an error + */ + if (mbx->ops.read(hw, &in_msg, 1)) + goto out; + + /* if incoming message isn't clear to send we are waiting on response */ + if (!(in_msg & E1000_VT_MSGTYPE_CTS)) { + /* msg is not CTS and is NACK we must have lost CTS status */ + if (in_msg & E1000_VT_MSGTYPE_NACK) + ret_val = -E1000_ERR_MAC_INIT; + goto out; + } + + /* the PF is talking, if we timed out in the past we reinit */ + if (!mbx->timeout) { + ret_val = -E1000_ERR_MAC_INIT; + goto out; + } + + /* if we passed all the tests above then the link is up and we no + * longer need to check for link + */ + mac->get_link_status = false; + +out: + return ret_val; +} + |