summaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/intel/igc/igc_base.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/ethernet/intel/igc/igc_base.c')
-rw-r--r--drivers/net/ethernet/intel/igc/igc_base.c448
1 files changed, 448 insertions, 0 deletions
diff --git a/drivers/net/ethernet/intel/igc/igc_base.c b/drivers/net/ethernet/intel/igc/igc_base.c
new file mode 100644
index 000000000..a1d815af5
--- /dev/null
+++ b/drivers/net/ethernet/intel/igc/igc_base.c
@@ -0,0 +1,448 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright (c) 2018 Intel Corporation */
+
+#include <linux/delay.h>
+
+#include "igc_hw.h"
+#include "igc_i225.h"
+#include "igc_mac.h"
+#include "igc_base.h"
+#include "igc.h"
+
+/**
+ * igc_reset_hw_base - Reset hardware
+ * @hw: pointer to the HW structure
+ *
+ * This resets the hardware into a known state. This is a
+ * function pointer entry point called by the api module.
+ */
+static s32 igc_reset_hw_base(struct igc_hw *hw)
+{
+ s32 ret_val;
+ u32 ctrl;
+
+ /* Prevent the PCI-E bus from sticking if there is no TLP connection
+ * on the last TLP read/write transaction when MAC is reset.
+ */
+ ret_val = igc_disable_pcie_master(hw);
+ if (ret_val)
+ hw_dbg("PCI-E Master disable polling has failed\n");
+
+ hw_dbg("Masking off all interrupts\n");
+ wr32(IGC_IMC, 0xffffffff);
+
+ wr32(IGC_RCTL, 0);
+ wr32(IGC_TCTL, IGC_TCTL_PSP);
+ wrfl();
+
+ usleep_range(10000, 20000);
+
+ ctrl = rd32(IGC_CTRL);
+
+ hw_dbg("Issuing a global reset to MAC\n");
+ wr32(IGC_CTRL, ctrl | IGC_CTRL_RST);
+
+ ret_val = igc_get_auto_rd_done(hw);
+ if (ret_val) {
+ /* When auto config read does not complete, do not
+ * return with an error. This can happen in situations
+ * where there is no eeprom and prevents getting link.
+ */
+ hw_dbg("Auto Read Done did not complete\n");
+ }
+
+ /* Clear any pending interrupt events. */
+ wr32(IGC_IMC, 0xffffffff);
+ rd32(IGC_ICR);
+
+ return ret_val;
+}
+
+/**
+ * igc_init_nvm_params_base - Init NVM func ptrs.
+ * @hw: pointer to the HW structure
+ */
+static s32 igc_init_nvm_params_base(struct igc_hw *hw)
+{
+ struct igc_nvm_info *nvm = &hw->nvm;
+ u32 eecd = rd32(IGC_EECD);
+ u16 size;
+
+ size = (u16)((eecd & IGC_EECD_SIZE_EX_MASK) >>
+ IGC_EECD_SIZE_EX_SHIFT);
+
+ /* Added to a constant, "size" becomes the left-shift value
+ * for setting word_size.
+ */
+ size += NVM_WORD_SIZE_BASE_SHIFT;
+
+ /* Just in case size is out of range, cap it to the largest
+ * EEPROM size supported
+ */
+ if (size > 15)
+ size = 15;
+
+ nvm->type = igc_nvm_eeprom_spi;
+ nvm->word_size = BIT(size);
+ nvm->opcode_bits = 8;
+ nvm->delay_usec = 1;
+
+ nvm->page_size = eecd & IGC_EECD_ADDR_BITS ? 32 : 8;
+ nvm->address_bits = eecd & IGC_EECD_ADDR_BITS ?
+ 16 : 8;
+
+ if (nvm->word_size == BIT(15))
+ nvm->page_size = 128;
+
+ return 0;
+}
+
+/**
+ * igc_setup_copper_link_base - Configure copper link settings
+ * @hw: pointer to the HW structure
+ *
+ * Configures the link for auto-neg or forced speed and duplex. Then we check
+ * for link, once link is established calls to configure collision distance
+ * and flow control are called.
+ */
+static s32 igc_setup_copper_link_base(struct igc_hw *hw)
+{
+ s32 ret_val = 0;
+ u32 ctrl;
+
+ ctrl = rd32(IGC_CTRL);
+ ctrl |= IGC_CTRL_SLU;
+ ctrl &= ~(IGC_CTRL_FRCSPD | IGC_CTRL_FRCDPX);
+ wr32(IGC_CTRL, ctrl);
+
+ ret_val = igc_setup_copper_link(hw);
+
+ return ret_val;
+}
+
+/**
+ * igc_init_mac_params_base - Init MAC func ptrs.
+ * @hw: pointer to the HW structure
+ */
+static s32 igc_init_mac_params_base(struct igc_hw *hw)
+{
+ struct igc_dev_spec_base *dev_spec = &hw->dev_spec._base;
+ struct igc_mac_info *mac = &hw->mac;
+
+ /* Set mta register count */
+ mac->mta_reg_count = 128;
+ mac->rar_entry_count = IGC_RAR_ENTRIES;
+
+ /* reset */
+ mac->ops.reset_hw = igc_reset_hw_base;
+
+ mac->ops.acquire_swfw_sync = igc_acquire_swfw_sync_i225;
+ mac->ops.release_swfw_sync = igc_release_swfw_sync_i225;
+
+ /* Allow a single clear of the SW semaphore on I225 */
+ if (mac->type == igc_i225)
+ dev_spec->clear_semaphore_once = true;
+
+ /* physical interface link setup */
+ mac->ops.setup_physical_interface = igc_setup_copper_link_base;
+
+ return 0;
+}
+
+/**
+ * igc_init_phy_params_base - Init PHY func ptrs.
+ * @hw: pointer to the HW structure
+ */
+static s32 igc_init_phy_params_base(struct igc_hw *hw)
+{
+ struct igc_phy_info *phy = &hw->phy;
+ s32 ret_val = 0;
+
+ phy->autoneg_mask = AUTONEG_ADVERTISE_SPEED_DEFAULT_2500;
+ phy->reset_delay_us = 100;
+
+ /* set lan id */
+ hw->bus.func = (rd32(IGC_STATUS) & IGC_STATUS_FUNC_MASK) >>
+ IGC_STATUS_FUNC_SHIFT;
+
+ /* Make sure the PHY is in a good state. Several people have reported
+ * firmware leaving the PHY's page select register set to something
+ * other than the default of zero, which causes the PHY ID read to
+ * access something other than the intended register.
+ */
+ ret_val = hw->phy.ops.reset(hw);
+ if (ret_val) {
+ hw_dbg("Error resetting the PHY\n");
+ goto out;
+ }
+
+ ret_val = igc_get_phy_id(hw);
+ if (ret_val)
+ return ret_val;
+
+ igc_check_for_copper_link(hw);
+
+out:
+ return ret_val;
+}
+
+static s32 igc_get_invariants_base(struct igc_hw *hw)
+{
+ struct igc_mac_info *mac = &hw->mac;
+ s32 ret_val = 0;
+
+ switch (hw->device_id) {
+ case IGC_DEV_ID_I225_LM:
+ case IGC_DEV_ID_I225_V:
+ case IGC_DEV_ID_I225_I:
+ case IGC_DEV_ID_I220_V:
+ case IGC_DEV_ID_I225_K:
+ case IGC_DEV_ID_I225_K2:
+ case IGC_DEV_ID_I226_K:
+ case IGC_DEV_ID_I225_LMVP:
+ case IGC_DEV_ID_I226_LMVP:
+ case IGC_DEV_ID_I225_IT:
+ case IGC_DEV_ID_I226_LM:
+ case IGC_DEV_ID_I226_V:
+ case IGC_DEV_ID_I226_IT:
+ case IGC_DEV_ID_I221_V:
+ case IGC_DEV_ID_I226_BLANK_NVM:
+ case IGC_DEV_ID_I225_BLANK_NVM:
+ mac->type = igc_i225;
+ break;
+ default:
+ return -IGC_ERR_MAC_INIT;
+ }
+
+ hw->phy.media_type = igc_media_type_copper;
+
+ /* mac initialization and operations */
+ ret_val = igc_init_mac_params_base(hw);
+ if (ret_val)
+ goto out;
+
+ /* NVM initialization */
+ ret_val = igc_init_nvm_params_base(hw);
+ switch (hw->mac.type) {
+ case igc_i225:
+ ret_val = igc_init_nvm_params_i225(hw);
+ break;
+ default:
+ break;
+ }
+
+ /* setup PHY parameters */
+ ret_val = igc_init_phy_params_base(hw);
+ if (ret_val)
+ goto out;
+
+out:
+ return ret_val;
+}
+
+/**
+ * igc_acquire_phy_base - Acquire rights to access PHY
+ * @hw: pointer to the HW structure
+ *
+ * Acquire access rights to the correct PHY. This is a
+ * function pointer entry point called by the api module.
+ */
+static s32 igc_acquire_phy_base(struct igc_hw *hw)
+{
+ u16 mask = IGC_SWFW_PHY0_SM;
+
+ return hw->mac.ops.acquire_swfw_sync(hw, mask);
+}
+
+/**
+ * igc_release_phy_base - Release rights to access PHY
+ * @hw: pointer to the HW structure
+ *
+ * A wrapper to release access rights to the correct PHY. This is a
+ * function pointer entry point called by the api module.
+ */
+static void igc_release_phy_base(struct igc_hw *hw)
+{
+ u16 mask = IGC_SWFW_PHY0_SM;
+
+ hw->mac.ops.release_swfw_sync(hw, mask);
+}
+
+/**
+ * igc_init_hw_base - Initialize hardware
+ * @hw: pointer to the HW structure
+ *
+ * This inits the hardware readying it for operation.
+ */
+static s32 igc_init_hw_base(struct igc_hw *hw)
+{
+ struct igc_mac_info *mac = &hw->mac;
+ u16 i, rar_count = mac->rar_entry_count;
+ s32 ret_val = 0;
+
+ /* Setup the receive address */
+ igc_init_rx_addrs(hw, rar_count);
+
+ /* Zero out the Multicast HASH table */
+ hw_dbg("Zeroing the MTA\n");
+ for (i = 0; i < mac->mta_reg_count; i++)
+ array_wr32(IGC_MTA, i, 0);
+
+ /* Zero out the Unicast HASH table */
+ hw_dbg("Zeroing the UTA\n");
+ for (i = 0; i < mac->uta_reg_count; i++)
+ array_wr32(IGC_UTA, i, 0);
+
+ /* Setup link and flow control */
+ ret_val = igc_setup_link(hw);
+
+ /* Clear all of the statistics registers (clear on read). It is
+ * important that we do this after we have tried to establish link
+ * because the symbol error count will increment wildly if there
+ * is no link.
+ */
+ igc_clear_hw_cntrs_base(hw);
+
+ return ret_val;
+}
+
+/**
+ * igc_power_down_phy_copper_base - Remove link during PHY power down
+ * @hw: pointer to the HW structure
+ *
+ * In the case of a PHY power down to save power, or to turn off link during a
+ * driver unload, or wake on lan is not enabled, remove the link.
+ */
+void igc_power_down_phy_copper_base(struct igc_hw *hw)
+{
+ /* If the management interface is not enabled, then power down */
+ if (!(igc_enable_mng_pass_thru(hw) || igc_check_reset_block(hw)))
+ igc_power_down_phy_copper(hw);
+}
+
+/**
+ * igc_rx_fifo_flush_base - Clean rx fifo after Rx enable
+ * @hw: pointer to the HW structure
+ *
+ * After Rx enable, if manageability is enabled then there is likely some
+ * bad data at the start of the fifo and possibly in the DMA fifo. This
+ * function clears the fifos and flushes any packets that came in as rx was
+ * being enabled.
+ */
+void igc_rx_fifo_flush_base(struct igc_hw *hw)
+{
+ u32 rctl, rlpml, rxdctl[4], rfctl, temp_rctl, rx_enabled;
+ int i, ms_wait;
+
+ /* disable IPv6 options as per hardware errata */
+ rfctl = rd32(IGC_RFCTL);
+ rfctl |= IGC_RFCTL_IPV6_EX_DIS;
+ wr32(IGC_RFCTL, rfctl);
+
+ if (!(rd32(IGC_MANC) & IGC_MANC_RCV_TCO_EN))
+ return;
+
+ /* Disable all Rx queues */
+ for (i = 0; i < 4; i++) {
+ rxdctl[i] = rd32(IGC_RXDCTL(i));
+ wr32(IGC_RXDCTL(i),
+ rxdctl[i] & ~IGC_RXDCTL_QUEUE_ENABLE);
+ }
+ /* Poll all queues to verify they have shut down */
+ for (ms_wait = 0; ms_wait < 10; ms_wait++) {
+ usleep_range(1000, 2000);
+ rx_enabled = 0;
+ for (i = 0; i < 4; i++)
+ rx_enabled |= rd32(IGC_RXDCTL(i));
+ if (!(rx_enabled & IGC_RXDCTL_QUEUE_ENABLE))
+ break;
+ }
+
+ if (ms_wait == 10)
+ hw_dbg("Queue disable timed out after 10ms\n");
+
+ /* Clear RLPML, RCTL.SBP, RFCTL.LEF, and set RCTL.LPE so that all
+ * incoming packets are rejected. Set enable and wait 2ms so that
+ * any packet that was coming in as RCTL.EN was set is flushed
+ */
+ wr32(IGC_RFCTL, rfctl & ~IGC_RFCTL_LEF);
+
+ rlpml = rd32(IGC_RLPML);
+ wr32(IGC_RLPML, 0);
+
+ rctl = rd32(IGC_RCTL);
+ temp_rctl = rctl & ~(IGC_RCTL_EN | IGC_RCTL_SBP);
+ temp_rctl |= IGC_RCTL_LPE;
+
+ wr32(IGC_RCTL, temp_rctl);
+ wr32(IGC_RCTL, temp_rctl | IGC_RCTL_EN);
+ wrfl();
+ usleep_range(2000, 3000);
+
+ /* Enable Rx queues that were previously enabled and restore our
+ * previous state
+ */
+ for (i = 0; i < 4; i++)
+ wr32(IGC_RXDCTL(i), rxdctl[i]);
+ wr32(IGC_RCTL, rctl);
+ wrfl();
+
+ wr32(IGC_RLPML, rlpml);
+ wr32(IGC_RFCTL, rfctl);
+
+ /* Flush receive errors generated by workaround */
+ rd32(IGC_ROC);
+ rd32(IGC_RNBC);
+ rd32(IGC_MPC);
+}
+
+bool igc_is_device_id_i225(struct igc_hw *hw)
+{
+ switch (hw->device_id) {
+ case IGC_DEV_ID_I225_LM:
+ case IGC_DEV_ID_I225_V:
+ case IGC_DEV_ID_I225_I:
+ case IGC_DEV_ID_I225_K:
+ case IGC_DEV_ID_I225_K2:
+ case IGC_DEV_ID_I225_LMVP:
+ case IGC_DEV_ID_I225_IT:
+ return true;
+ default:
+ return false;
+ }
+}
+
+bool igc_is_device_id_i226(struct igc_hw *hw)
+{
+ switch (hw->device_id) {
+ case IGC_DEV_ID_I226_LM:
+ case IGC_DEV_ID_I226_V:
+ case IGC_DEV_ID_I226_K:
+ case IGC_DEV_ID_I226_IT:
+ return true;
+ default:
+ return false;
+ }
+}
+
+static struct igc_mac_operations igc_mac_ops_base = {
+ .init_hw = igc_init_hw_base,
+ .check_for_link = igc_check_for_copper_link,
+ .rar_set = igc_rar_set,
+ .read_mac_addr = igc_read_mac_addr,
+ .get_speed_and_duplex = igc_get_speed_and_duplex_copper,
+};
+
+static const struct igc_phy_operations igc_phy_ops_base = {
+ .acquire = igc_acquire_phy_base,
+ .release = igc_release_phy_base,
+ .reset = igc_phy_hw_reset,
+ .read_reg = igc_read_phy_reg_gpy,
+ .write_reg = igc_write_phy_reg_gpy,
+};
+
+const struct igc_info igc_base_info = {
+ .get_invariants = igc_get_invariants_base,
+ .mac_ops = &igc_mac_ops_base,
+ .phy_ops = &igc_phy_ops_base,
+};