summaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/ethernet/intel/ixgbe/ixgbe_main.c')
-rw-r--r--drivers/net/ethernet/intel/ixgbe/ixgbe_main.c44
1 files changed, 20 insertions, 24 deletions
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
index dd03b017df..6a3f633406 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
@@ -2421,7 +2421,7 @@ static int ixgbe_clean_rx_irq(struct ixgbe_q_vector *q_vector,
}
if (xdp_xmit & IXGBE_XDP_REDIR)
- xdp_do_flush_map();
+ xdp_do_flush();
if (xdp_xmit & IXGBE_XDP_TX) {
struct ixgbe_ring *ring = ixgbe_determine_xdp_ring(adapter);
@@ -2756,7 +2756,6 @@ static void ixgbe_check_overtemp_subtask(struct ixgbe_adapter *adapter)
{
struct ixgbe_hw *hw = &adapter->hw;
u32 eicr = adapter->interrupt_event;
- s32 rc;
if (test_bit(__IXGBE_DOWN, &adapter->state))
return;
@@ -2790,14 +2789,13 @@ static void ixgbe_check_overtemp_subtask(struct ixgbe_adapter *adapter)
}
/* Check if this is not due to overtemp */
- if (hw->phy.ops.check_overtemp(hw) != IXGBE_ERR_OVERTEMP)
+ if (!hw->phy.ops.check_overtemp(hw))
return;
break;
case IXGBE_DEV_ID_X550EM_A_1G_T:
case IXGBE_DEV_ID_X550EM_A_1G_T_L:
- rc = hw->phy.ops.check_overtemp(hw);
- if (rc != IXGBE_ERR_OVERTEMP)
+ if (!hw->phy.ops.check_overtemp(hw))
return;
break;
default:
@@ -5512,7 +5510,7 @@ static int ixgbe_non_sfp_link_config(struct ixgbe_hw *hw)
{
u32 speed;
bool autoneg, link_up = false;
- int ret = IXGBE_ERR_LINK_SETUP;
+ int ret = -EIO;
if (hw->mac.ops.check_link)
ret = hw->mac.ops.check_link(hw, &speed, &link_up, false);
@@ -5983,13 +5981,13 @@ void ixgbe_reset(struct ixgbe_adapter *adapter)
err = hw->mac.ops.init_hw(hw);
switch (err) {
case 0:
- case IXGBE_ERR_SFP_NOT_PRESENT:
- case IXGBE_ERR_SFP_NOT_SUPPORTED:
+ case -ENOENT:
+ case -EOPNOTSUPP:
break;
- case IXGBE_ERR_PRIMARY_REQUESTS_PENDING:
+ case -EALREADY:
e_dev_err("primary disable timed out\n");
break;
- case IXGBE_ERR_EEPROM_VERSION:
+ case -EACCES:
/* We are running on a pre-production device, log a warning */
e_dev_warn("This device is a pre-production adapter/LOM. "
"Please be aware there may be issues associated with "
@@ -7829,10 +7827,10 @@ static void ixgbe_sfp_detection_subtask(struct ixgbe_adapter *adapter)
adapter->sfp_poll_time = jiffies + IXGBE_SFP_POLL_JIFFIES - 1;
err = hw->phy.ops.identify_sfp(hw);
- if (err == IXGBE_ERR_SFP_NOT_SUPPORTED)
+ if (err == -EOPNOTSUPP)
goto sfp_out;
- if (err == IXGBE_ERR_SFP_NOT_PRESENT) {
+ if (err == -ENOENT) {
/* If no cable is present, then we need to reset
* the next time we find a good cable. */
adapter->flags2 |= IXGBE_FLAG2_SFP_NEEDS_RESET;
@@ -7858,7 +7856,7 @@ static void ixgbe_sfp_detection_subtask(struct ixgbe_adapter *adapter)
else
err = hw->mac.ops.setup_sfp(hw);
- if (err == IXGBE_ERR_SFP_NOT_SUPPORTED)
+ if (err == -EOPNOTSUPP)
goto sfp_out;
adapter->flags |= IXGBE_FLAG_NEED_LINK_CONFIG;
@@ -7867,8 +7865,8 @@ static void ixgbe_sfp_detection_subtask(struct ixgbe_adapter *adapter)
sfp_out:
clear_bit(__IXGBE_IN_SFP_INIT, &adapter->state);
- if ((err == IXGBE_ERR_SFP_NOT_SUPPORTED) &&
- (adapter->netdev->reg_state == NETREG_REGISTERED)) {
+ if (err == -EOPNOTSUPP &&
+ adapter->netdev->reg_state == NETREG_REGISTERED) {
e_dev_err("failed to initialize because an unsupported "
"SFP+ module type was detected.\n");
e_dev_err("Reload the driver after installing a "
@@ -7938,7 +7936,7 @@ static void ixgbe_service_timer(struct timer_list *t)
static void ixgbe_phy_interrupt_subtask(struct ixgbe_adapter *adapter)
{
struct ixgbe_hw *hw = &adapter->hw;
- u32 status;
+ bool overtemp;
if (!(adapter->flags2 & IXGBE_FLAG2_PHY_INTERRUPT))
return;
@@ -7948,11 +7946,9 @@ static void ixgbe_phy_interrupt_subtask(struct ixgbe_adapter *adapter)
if (!hw->phy.ops.handle_lasi)
return;
- status = hw->phy.ops.handle_lasi(&adapter->hw);
- if (status != IXGBE_ERR_OVERTEMP)
- return;
-
- e_crit(drv, "%s\n", ixgbe_overheat_msg);
+ hw->phy.ops.handle_lasi(&adapter->hw, &overtemp);
+ if (overtemp)
+ e_crit(drv, "%s\n", ixgbe_overheat_msg);
}
static void ixgbe_reset_subtask(struct ixgbe_adapter *adapter)
@@ -10922,9 +10918,9 @@ static int ixgbe_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
err = hw->mac.ops.reset_hw(hw);
hw->phy.reset_if_overtemp = false;
ixgbe_set_eee_capable(adapter);
- if (err == IXGBE_ERR_SFP_NOT_PRESENT) {
+ if (err == -ENOENT) {
err = 0;
- } else if (err == IXGBE_ERR_SFP_NOT_SUPPORTED) {
+ } else if (err == -EOPNOTSUPP) {
e_dev_err("failed to load because an unsupported SFP+ or QSFP module type was detected.\n");
e_dev_err("Reload the driver after installing a supported module.\n");
goto err_sw_init;
@@ -11143,7 +11139,7 @@ skip_sriov:
/* reset the hardware with the new settings */
err = hw->mac.ops.start_hw(hw);
- if (err == IXGBE_ERR_EEPROM_VERSION) {
+ if (err == -EACCES) {
/* We are running on a pre-production device, log a warning */
e_dev_warn("This device is a pre-production adapter/LOM. "
"Please be aware there may be issues associated "