diff options
Diffstat (limited to 'drivers/net/ethernet/marvell/Kconfig')
| -rw-r--r-- | drivers/net/ethernet/marvell/Kconfig | 185 |
1 files changed, 185 insertions, 0 deletions
diff --git a/drivers/net/ethernet/marvell/Kconfig b/drivers/net/ethernet/marvell/Kconfig new file mode 100644 index 0000000000..884d64114b --- /dev/null +++ b/drivers/net/ethernet/marvell/Kconfig @@ -0,0 +1,185 @@ +# SPDX-License-Identifier: GPL-2.0-only +# +# Marvell device configuration +# + +config NET_VENDOR_MARVELL + bool "Marvell devices" + default y + depends on PCI || CPU_PXA168 || PPC32 || PLAT_ORION || INET || COMPILE_TEST + help + If you have a network (Ethernet) card belonging to this class, say Y. + + Note that the answer to this question doesn't directly affect the + kernel: saying N will just cause the configurator to skip all + the questions about Marvell devices. If you say Y, you will be + asked for your specific card in the following questions. + +if NET_VENDOR_MARVELL + +config MV643XX_ETH + tristate "Marvell Discovery (643XX) and Orion ethernet support" + depends on PPC32 || PLAT_ORION || COMPILE_TEST + depends on INET + select PHYLIB + select MVMDIO + help + This driver supports the gigabit ethernet MACs in the + Marvell Discovery PPC/MIPS chipset family (MV643XX) and + in the Marvell Orion ARM SoC family. + + Some boards that use the Discovery chipset are the Momenco + Ocelot C and Jaguar ATX and Pegasos II. + +config MVMDIO + tristate "Marvell MDIO interface support" + depends on HAS_IOMEM + select MDIO_DEVRES + select PHYLIB + help + This driver supports the MDIO interface found in the network + interface units of the Marvell EBU SoCs (Kirkwood, Orion5x, + Dove, Armada 370 and Armada XP). + + This driver is used by the MV643XX_ETH and MVNETA drivers. + +config MVNETA_BM_ENABLE + tristate "Marvell Armada 38x/XP network interface BM support" + depends on MVNETA + depends on !64BIT + help + This driver supports auxiliary block of the network + interface units in the Marvell ARMADA XP and ARMADA 38x SoC + family, which is called buffer manager. + + This driver, when enabled, strictly cooperates with mvneta + driver and is common for all network ports of the devices, + even for Armada 370 SoC, which doesn't support hardware + buffer management. + +config MVNETA + tristate "Marvell Armada 370/38x/XP/37xx network interface support" + depends on ARCH_MVEBU || COMPILE_TEST + select MVMDIO + select PHYLINK + select PAGE_POOL + select PAGE_POOL_STATS + help + This driver supports the network interface units in the + Marvell ARMADA XP, ARMADA 370, ARMADA 38x and + ARMADA 37xx SoC family. + + Note that this driver is distinct from the mv643xx_eth + driver, which should be used for the older Marvell SoCs + (Dove, Orion, Discovery, Kirkwood). + +config MVNETA_BM + tristate + depends on !64BIT + default y if MVNETA=y && MVNETA_BM_ENABLE!=n + default MVNETA_BM_ENABLE + select HWBM + select GENERIC_ALLOCATOR + help + MVNETA_BM must not be 'm' if MVNETA=y, so this symbol ensures + that all dependencies are met. + +config MVPP2 + tristate "Marvell Armada 375/7K/8K network interface support" + depends on ARCH_MVEBU || COMPILE_TEST + select MVMDIO + select PHYLINK + select PAGE_POOL + help + This driver supports the network interface units in the + Marvell ARMADA 375, 7K and 8K SoCs. + +config MVPP2_PTP + bool "Marvell Armada 8K Enable PTP support" + depends on (PTP_1588_CLOCK = y && MVPP2 = y) || \ + (PTP_1588_CLOCK && MVPP2 = m) + +config PXA168_ETH + tristate "Marvell pxa168 ethernet support" + depends on HAS_IOMEM + depends on CPU_PXA168 || ARCH_BERLIN || COMPILE_TEST + select PHYLIB + help + This driver supports the pxa168 Ethernet ports. + + To compile this driver as a module, choose M here. The module + will be called pxa168_eth. + +config SKGE + tristate "Marvell Yukon Gigabit Ethernet support" + depends on PCI + select CRC32 + help + This driver support the Marvell Yukon or SysKonnect SK-98xx/SK-95xx + and related Gigabit Ethernet adapters. It is a new smaller driver + with better performance and more complete ethtool support. + + It does not support the link failover and network management + features that "portable" vendor supplied sk98lin driver does. + + This driver supports adapters based on the original Yukon chipset: + Marvell 88E8001, Belkin F5D5005, CNet GigaCard, DLink DGE-530T, + Linksys EG1032/EG1064, 3Com 3C940/3C940B, SysKonnect SK-9871/9872. + + It does not support the newer Yukon2 chipset: a separate driver, + sky2, is provided for these adapters. + + To compile this driver as a module, choose M here: the module + will be called skge. This is recommended. + +config SKGE_DEBUG + bool "Debugging interface" + depends on SKGE && DEBUG_FS + help + This option adds the ability to dump driver state for debugging. + The file /sys/kernel/debug/skge/ethX displays the state of the internal + transmit and receive rings. + + If unsure, say N. + +config SKGE_GENESIS + bool "Support for older SysKonnect Genesis boards" + depends on SKGE + help + This enables support for the older and uncommon SysKonnect Genesis + chips, which support MII via an external transceiver, instead of + an internal one. Disabling this option will save some memory + by making code smaller. If unsure say Y. + +config SKY2 + tristate "Marvell Yukon 2 support" + depends on PCI + select CRC32 + help + This driver supports Gigabit Ethernet adapters based on the + Marvell Yukon 2 chipset: + Marvell 88E8021/88E8022/88E8035/88E8036/88E8038/88E8050/88E8052/ + 88E8053/88E8055/88E8061/88E8062, SysKonnect SK-9E21D/SK-9S21 + + There is companion driver for the older Marvell Yukon and + SysKonnect Genesis based adapters: skge. + + To compile this driver as a module, choose M here: the module + will be called sky2. This is recommended. + +config SKY2_DEBUG + bool "Debugging interface" + depends on SKY2 && DEBUG_FS + help + This option adds the ability to dump driver state for debugging. + The file /sys/kernel/debug/sky2/ethX displays the state of the internal + transmit and receive rings. + + If unsure, say N. + + +source "drivers/net/ethernet/marvell/octeontx2/Kconfig" +source "drivers/net/ethernet/marvell/octeon_ep/Kconfig" +source "drivers/net/ethernet/marvell/prestera/Kconfig" + +endif # NET_VENDOR_MARVELL |