diff options
Diffstat (limited to 'drivers/net/ethernet/mellanox/mlxsw/reg.h')
-rw-r--r-- | drivers/net/ethernet/mellanox/mlxsw/reg.h | 103 |
1 files changed, 94 insertions, 9 deletions
diff --git a/drivers/net/ethernet/mellanox/mlxsw/reg.h b/drivers/net/ethernet/mellanox/mlxsw/reg.h index 25b294fdeb..8892654c68 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/reg.h +++ b/drivers/net/ethernet/mellanox/mlxsw/reg.h @@ -1024,6 +1024,8 @@ static inline void mlxsw_reg_spaft_pack(char *payload, u16 local_port, * ------------------------------------------ * The following register controls the association of flooding tables and MIDs * to packet types used for flooding. + * + * Reserved when CONFIG_PROFILE.flood_mode = CFF. */ #define MLXSW_REG_SFGC_ID 0x2011 #define MLXSW_REG_SFGC_LEN 0x14 @@ -1862,6 +1864,7 @@ MLXSW_ITEM32(reg, sfmr, fid, 0x00, 0, 16); * Access: RW * * Note: Reserved when legacy bridge model is used. + * Reserved when CONFIG_PROFILE.flood_mode = CFF. */ MLXSW_ITEM32(reg, sfmr, flood_rsp, 0x08, 31, 1); @@ -1872,6 +1875,7 @@ MLXSW_ITEM32(reg, sfmr, flood_rsp, 0x08, 31, 1); * Access: RW * * Note: Reserved when legacy bridge model is used and when flood_rsp=1. + * Reserved when CONFIG_PROFILE.flood_mode = CFF */ MLXSW_ITEM32(reg, sfmr, flood_bridge_type, 0x08, 28, 1); @@ -1880,6 +1884,8 @@ MLXSW_ITEM32(reg, sfmr, flood_bridge_type, 0x08, 28, 1); * Used to point into the flooding table selected by SFGC register if * the table is of type FID-Offset. Otherwise, this field is reserved. * Access: RW + * + * Note: Reserved when CONFIG_PROFILE.flood_mode = CFF */ MLXSW_ITEM32(reg, sfmr, fid_offset, 0x08, 0, 16); @@ -1938,6 +1944,35 @@ MLXSW_ITEM32(reg, sfmr, irif_v, 0x14, 24, 1); */ MLXSW_ITEM32(reg, sfmr, irif, 0x14, 0, 16); +/* reg_sfmr_cff_mid_base + * Pointer to PGT table. + * Range: 0..(cap_max_pgt-1) + * Access: RW + * + * Note: Reserved when SwitchX/-2 and Spectrum-1. + * Supported when CONFIG_PROFILE.flood_mode = CFF. + */ +MLXSW_ITEM32(reg, sfmr, cff_mid_base, 0x20, 0, 16); + +/* reg_sfmr_nve_flood_prf_id + * FID flooding profile_id for NVE Encap + * Range 0..(max_cap_nve_flood_prf-1) + * Access: RW + * + * Note: Reserved when SwitchX/-2 and Spectrum-1 + */ +MLXSW_ITEM32(reg, sfmr, nve_flood_prf_id, 0x24, 8, 2); + +/* reg_sfmr_cff_prf_id + * Compressed Fid Flooding profile_id + * Range 0..(max_cap_nve_flood_prf-1) + * Access: RW + * + * Note: Reserved when SwitchX/-2 and Spectrum-1 + * Supported only when CONFIG_PROFLE.flood_mode = CFF. + */ +MLXSW_ITEM32(reg, sfmr, cff_prf_id, 0x24, 0, 2); + /* reg_sfmr_smpe_valid * SMPE is valid. * Access: RW @@ -1959,18 +1994,11 @@ MLXSW_ITEM32(reg, sfmr, smpe, 0x28, 0, 16); static inline void mlxsw_reg_sfmr_pack(char *payload, enum mlxsw_reg_sfmr_op op, u16 fid, - u16 fid_offset, bool flood_rsp, - enum mlxsw_reg_bridge_type bridge_type, bool smpe_valid, u16 smpe) { MLXSW_REG_ZERO(sfmr, payload); mlxsw_reg_sfmr_op_set(payload, op); mlxsw_reg_sfmr_fid_set(payload, fid); - mlxsw_reg_sfmr_fid_offset_set(payload, fid_offset); - mlxsw_reg_sfmr_vtfp_set(payload, false); - mlxsw_reg_sfmr_vv_set(payload, false); - mlxsw_reg_sfmr_flood_rsp_set(payload, flood_rsp); - mlxsw_reg_sfmr_flood_bridge_type_set(payload, bridge_type); mlxsw_reg_sfmr_smpe_valid_set(payload, smpe_valid); mlxsw_reg_sfmr_smpe_set(payload, smpe); } @@ -2168,6 +2196,50 @@ static inline void mlxsw_reg_spvc_pack(char *payload, u16 local_port, bool et1, mlxsw_reg_spvc_et0_set(payload, et0); } +/* SFFP - Switch FID Flooding Profiles Register + * -------------------------------------------- + * The SFFP register populates the fid flooding profile tables used for the NVE + * flooding and Compressed-FID Flooding (CFF). + * + * Reserved on Spectrum-1. + */ +#define MLXSW_REG_SFFP_ID 0x2029 +#define MLXSW_REG_SFFP_LEN 0x0C + +MLXSW_REG_DEFINE(sffp, MLXSW_REG_SFFP_ID, MLXSW_REG_SFFP_LEN); + +/* reg_sffp_profile_id + * Profile ID a.k.a. SFMR.nve_flood_prf_id or SFMR.cff_prf_id + * Range 0..max_cap_nve_flood_prf-1 + * Access: Index + */ +MLXSW_ITEM32(reg, sffp, profile_id, 0x00, 16, 2); + +/* reg_sffp_type + * The traffic type to reach the flooding table. + * Same as SFGC.type + * Access: Index + */ +MLXSW_ITEM32(reg, sffp, type, 0x00, 0, 4); + +/* reg_sffp_flood_offset + * Flood offset. Offset to add to SFMR.cff_mid_base to get the final PGT address + * for FID flood; or offset to add to SFMR.nve_tunnel_flood_ptr to get KVD + * pointer for NVE underlay. + * Access: RW + */ +MLXSW_ITEM32(reg, sffp, flood_offset, 0x04, 0, 3); + +static inline void mlxsw_reg_sffp_pack(char *payload, u8 profile_id, + enum mlxsw_reg_sfgc_type type, + u8 flood_offset) +{ + MLXSW_REG_ZERO(sffp, payload); + mlxsw_reg_sffp_profile_id_set(payload, profile_id); + mlxsw_reg_sffp_type_set(payload, type); + mlxsw_reg_sffp_flood_offset_set(payload, flood_offset); +} + /* SPEVET - Switch Port Egress VLAN EtherType * ------------------------------------------ * The switch port egress VLAN EtherType configures which EtherType to push at @@ -10122,6 +10194,15 @@ mlxsw_reg_mgir_unpack(char *payload, u32 *hw_rev, char *fw_info_psid, MLXSW_REG_DEFINE(mrsr, MLXSW_REG_MRSR_ID, MLXSW_REG_MRSR_LEN); +enum mlxsw_reg_mrsr_command { + /* Switch soft reset, does not reset PCI firmware. */ + MLXSW_REG_MRSR_COMMAND_SOFTWARE_RESET = 1, + /* Reset will be done when PCI link will be disabled. + * This command will reset PCI firmware also. + */ + MLXSW_REG_MRSR_COMMAND_RESET_AT_PCI_DISABLE = 6, +}; + /* reg_mrsr_command * Reset/shutdown command * 0 - do nothing @@ -10130,10 +10211,11 @@ MLXSW_REG_DEFINE(mrsr, MLXSW_REG_MRSR_ID, MLXSW_REG_MRSR_LEN); */ MLXSW_ITEM32(reg, mrsr, command, 0x00, 0, 4); -static inline void mlxsw_reg_mrsr_pack(char *payload) +static inline void mlxsw_reg_mrsr_pack(char *payload, + enum mlxsw_reg_mrsr_command command) { MLXSW_REG_ZERO(mrsr, payload); - mlxsw_reg_mrsr_command_set(payload, 1); + mlxsw_reg_mrsr_command_set(payload, command); } /* MLCR - Management LED Control Register @@ -10584,6 +10666,8 @@ MLXSW_ITEM32(reg, mcam, feature_group, 0x00, 16, 8); enum mlxsw_reg_mcam_mng_feature_cap_mask_bits { /* If set, MCIA supports 128 bytes payloads. Otherwise, 48 bytes. */ MLXSW_REG_MCAM_MCIA_128B = 34, + /* If set, MRSR.command=6 is supported. */ + MLXSW_REG_MCAM_PCI_RESET = 48, }; #define MLXSW_REG_BYTES_PER_DWORD 0x4 @@ -12934,6 +13018,7 @@ static const struct mlxsw_reg_info *mlxsw_reg_infos[] = { MLXSW_REG(spvmlr), MLXSW_REG(spfsr), MLXSW_REG(spvc), + MLXSW_REG(sffp), MLXSW_REG(spevet), MLXSW_REG(smpe), MLXSW_REG(smid2), |