summaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/via/via-velocity.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/ethernet/via/via-velocity.c')
-rw-r--r--drivers/net/ethernet/via/via-velocity.c3744
1 files changed, 3744 insertions, 0 deletions
diff --git a/drivers/net/ethernet/via/via-velocity.c b/drivers/net/ethernet/via/via-velocity.c
new file mode 100644
index 0000000000..731f689412
--- /dev/null
+++ b/drivers/net/ethernet/via/via-velocity.c
@@ -0,0 +1,3744 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * This code is derived from the VIA reference driver (copyright message
+ * below) provided to Red Hat by VIA Networking Technologies, Inc. for
+ * addition to the Linux kernel.
+ *
+ * The code has been merged into one source file, cleaned up to follow
+ * Linux coding style, ported to the Linux 2.6 kernel tree and cleaned
+ * for 64bit hardware platforms.
+ *
+ * TODO
+ * rx_copybreak/alignment
+ * More testing
+ *
+ * The changes are (c) Copyright 2004, Red Hat Inc. <alan@lxorguk.ukuu.org.uk>
+ * Additional fixes and clean up: Francois Romieu
+ *
+ * This source has not been verified for use in safety critical systems.
+ *
+ * Please direct queries about the revamped driver to the linux-kernel
+ * list not VIA.
+ *
+ * Original code:
+ *
+ * Copyright (c) 1996, 2003 VIA Networking Technologies, Inc.
+ * All rights reserved.
+ *
+ * Author: Chuang Liang-Shing, AJ Jiang
+ *
+ * Date: Jan 24, 2003
+ *
+ * MODULE_LICENSE("GPL");
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/bitops.h>
+#include <linux/init.h>
+#include <linux/dma-mapping.h>
+#include <linux/mm.h>
+#include <linux/errno.h>
+#include <linux/ioport.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/delay.h>
+#include <linux/timer.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/string.h>
+#include <linux/wait.h>
+#include <linux/io.h>
+#include <linux/if.h>
+#include <linux/uaccess.h>
+#include <linux/proc_fs.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/inetdevice.h>
+#include <linux/platform_device.h>
+#include <linux/reboot.h>
+#include <linux/ethtool.h>
+#include <linux/mii.h>
+#include <linux/in.h>
+#include <linux/if_arp.h>
+#include <linux/if_vlan.h>
+#include <linux/ip.h>
+#include <linux/tcp.h>
+#include <linux/udp.h>
+#include <linux/crc-ccitt.h>
+#include <linux/crc32.h>
+
+#include "via-velocity.h"
+
+enum velocity_bus_type {
+ BUS_PCI,
+ BUS_PLATFORM,
+};
+
+static int velocity_nics;
+
+static void velocity_set_power_state(struct velocity_info *vptr, char state)
+{
+ void *addr = vptr->mac_regs;
+
+ if (vptr->pdev)
+ pci_set_power_state(vptr->pdev, state);
+ else
+ writeb(state, addr + 0x154);
+}
+
+/**
+ * mac_get_cam_mask - Read a CAM mask
+ * @regs: register block for this velocity
+ * @mask: buffer to store mask
+ *
+ * Fetch the mask bits of the selected CAM and store them into the
+ * provided mask buffer.
+ */
+static void mac_get_cam_mask(struct mac_regs __iomem *regs, u8 *mask)
+{
+ int i;
+
+ /* Select CAM mask */
+ BYTE_REG_BITS_SET(CAMCR_PS_CAM_MASK, CAMCR_PS1 | CAMCR_PS0, &regs->CAMCR);
+
+ writeb(0, &regs->CAMADDR);
+
+ /* read mask */
+ for (i = 0; i < 8; i++)
+ *mask++ = readb(&(regs->MARCAM[i]));
+
+ /* disable CAMEN */
+ writeb(0, &regs->CAMADDR);
+
+ /* Select mar */
+ BYTE_REG_BITS_SET(CAMCR_PS_MAR, CAMCR_PS1 | CAMCR_PS0, &regs->CAMCR);
+}
+
+/**
+ * mac_set_cam_mask - Set a CAM mask
+ * @regs: register block for this velocity
+ * @mask: CAM mask to load
+ *
+ * Store a new mask into a CAM
+ */
+static void mac_set_cam_mask(struct mac_regs __iomem *regs, u8 *mask)
+{
+ int i;
+ /* Select CAM mask */
+ BYTE_REG_BITS_SET(CAMCR_PS_CAM_MASK, CAMCR_PS1 | CAMCR_PS0, &regs->CAMCR);
+
+ writeb(CAMADDR_CAMEN, &regs->CAMADDR);
+
+ for (i = 0; i < 8; i++)
+ writeb(*mask++, &(regs->MARCAM[i]));
+
+ /* disable CAMEN */
+ writeb(0, &regs->CAMADDR);
+
+ /* Select mar */
+ BYTE_REG_BITS_SET(CAMCR_PS_MAR, CAMCR_PS1 | CAMCR_PS0, &regs->CAMCR);
+}
+
+static void mac_set_vlan_cam_mask(struct mac_regs __iomem *regs, u8 *mask)
+{
+ int i;
+ /* Select CAM mask */
+ BYTE_REG_BITS_SET(CAMCR_PS_CAM_MASK, CAMCR_PS1 | CAMCR_PS0, &regs->CAMCR);
+
+ writeb(CAMADDR_CAMEN | CAMADDR_VCAMSL, &regs->CAMADDR);
+
+ for (i = 0; i < 8; i++)
+ writeb(*mask++, &(regs->MARCAM[i]));
+
+ /* disable CAMEN */
+ writeb(0, &regs->CAMADDR);
+
+ /* Select mar */
+ BYTE_REG_BITS_SET(CAMCR_PS_MAR, CAMCR_PS1 | CAMCR_PS0, &regs->CAMCR);
+}
+
+/**
+ * mac_set_cam - set CAM data
+ * @regs: register block of this velocity
+ * @idx: Cam index
+ * @addr: 2 or 6 bytes of CAM data
+ *
+ * Load an address or vlan tag into a CAM
+ */
+static void mac_set_cam(struct mac_regs __iomem *regs, int idx, const u8 *addr)
+{
+ int i;
+
+ /* Select CAM mask */
+ BYTE_REG_BITS_SET(CAMCR_PS_CAM_DATA, CAMCR_PS1 | CAMCR_PS0, &regs->CAMCR);
+
+ idx &= (64 - 1);
+
+ writeb(CAMADDR_CAMEN | idx, &regs->CAMADDR);
+
+ for (i = 0; i < 6; i++)
+ writeb(*addr++, &(regs->MARCAM[i]));
+
+ BYTE_REG_BITS_ON(CAMCR_CAMWR, &regs->CAMCR);
+
+ udelay(10);
+
+ writeb(0, &regs->CAMADDR);
+
+ /* Select mar */
+ BYTE_REG_BITS_SET(CAMCR_PS_MAR, CAMCR_PS1 | CAMCR_PS0, &regs->CAMCR);
+}
+
+static void mac_set_vlan_cam(struct mac_regs __iomem *regs, int idx,
+ const u8 *addr)
+{
+
+ /* Select CAM mask */
+ BYTE_REG_BITS_SET(CAMCR_PS_CAM_DATA, CAMCR_PS1 | CAMCR_PS0, &regs->CAMCR);
+
+ idx &= (64 - 1);
+
+ writeb(CAMADDR_CAMEN | CAMADDR_VCAMSL | idx, &regs->CAMADDR);
+ writew(*((u16 *) addr), &regs->MARCAM[0]);
+
+ BYTE_REG_BITS_ON(CAMCR_CAMWR, &regs->CAMCR);
+
+ udelay(10);
+
+ writeb(0, &regs->CAMADDR);
+
+ /* Select mar */
+ BYTE_REG_BITS_SET(CAMCR_PS_MAR, CAMCR_PS1 | CAMCR_PS0, &regs->CAMCR);
+}
+
+
+/**
+ * mac_wol_reset - reset WOL after exiting low power
+ * @regs: register block of this velocity
+ *
+ * Called after we drop out of wake on lan mode in order to
+ * reset the Wake on lan features. This function doesn't restore
+ * the rest of the logic from the result of sleep/wakeup
+ */
+static void mac_wol_reset(struct mac_regs __iomem *regs)
+{
+
+ /* Turn off SWPTAG right after leaving power mode */
+ BYTE_REG_BITS_OFF(STICKHW_SWPTAG, &regs->STICKHW);
+ /* clear sticky bits */
+ BYTE_REG_BITS_OFF((STICKHW_DS1 | STICKHW_DS0), &regs->STICKHW);
+
+ BYTE_REG_BITS_OFF(CHIPGCR_FCGMII, &regs->CHIPGCR);
+ BYTE_REG_BITS_OFF(CHIPGCR_FCMODE, &regs->CHIPGCR);
+ /* disable force PME-enable */
+ writeb(WOLCFG_PMEOVR, &regs->WOLCFGClr);
+ /* disable power-event config bit */
+ writew(0xFFFF, &regs->WOLCRClr);
+ /* clear power status */
+ writew(0xFFFF, &regs->WOLSRClr);
+}
+
+static const struct ethtool_ops velocity_ethtool_ops;
+
+/*
+ Define module options
+*/
+
+MODULE_AUTHOR("VIA Networking Technologies, Inc.");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("VIA Networking Velocity Family Gigabit Ethernet Adapter Driver");
+
+#define VELOCITY_PARAM(N, D) \
+ static int N[MAX_UNITS] = OPTION_DEFAULT;\
+ module_param_array(N, int, NULL, 0); \
+ MODULE_PARM_DESC(N, D);
+
+#define RX_DESC_MIN 64
+#define RX_DESC_MAX 255
+#define RX_DESC_DEF 64
+VELOCITY_PARAM(RxDescriptors, "Number of receive descriptors");
+
+#define TX_DESC_MIN 16
+#define TX_DESC_MAX 256
+#define TX_DESC_DEF 64
+VELOCITY_PARAM(TxDescriptors, "Number of transmit descriptors");
+
+#define RX_THRESH_MIN 0
+#define RX_THRESH_MAX 3
+#define RX_THRESH_DEF 0
+/* rx_thresh[] is used for controlling the receive fifo threshold.
+ 0: indicate the rxfifo threshold is 128 bytes.
+ 1: indicate the rxfifo threshold is 512 bytes.
+ 2: indicate the rxfifo threshold is 1024 bytes.
+ 3: indicate the rxfifo threshold is store & forward.
+*/
+VELOCITY_PARAM(rx_thresh, "Receive fifo threshold");
+
+#define DMA_LENGTH_MIN 0
+#define DMA_LENGTH_MAX 7
+#define DMA_LENGTH_DEF 6
+
+/* DMA_length[] is used for controlling the DMA length
+ 0: 8 DWORDs
+ 1: 16 DWORDs
+ 2: 32 DWORDs
+ 3: 64 DWORDs
+ 4: 128 DWORDs
+ 5: 256 DWORDs
+ 6: SF(flush till emply)
+ 7: SF(flush till emply)
+*/
+VELOCITY_PARAM(DMA_length, "DMA length");
+
+#define IP_ALIG_DEF 0
+/* IP_byte_align[] is used for IP header DWORD byte aligned
+ 0: indicate the IP header won't be DWORD byte aligned.(Default) .
+ 1: indicate the IP header will be DWORD byte aligned.
+ In some environment, the IP header should be DWORD byte aligned,
+ or the packet will be droped when we receive it. (eg: IPVS)
+*/
+VELOCITY_PARAM(IP_byte_align, "Enable IP header dword aligned");
+
+#define FLOW_CNTL_DEF 1
+#define FLOW_CNTL_MIN 1
+#define FLOW_CNTL_MAX 5
+
+/* flow_control[] is used for setting the flow control ability of NIC.
+ 1: hardware deafult - AUTO (default). Use Hardware default value in ANAR.
+ 2: enable TX flow control.
+ 3: enable RX flow control.
+ 4: enable RX/TX flow control.
+ 5: disable
+*/
+VELOCITY_PARAM(flow_control, "Enable flow control ability");
+
+#define MED_LNK_DEF 0
+#define MED_LNK_MIN 0
+#define MED_LNK_MAX 5
+/* speed_duplex[] is used for setting the speed and duplex mode of NIC.
+ 0: indicate autonegotiation for both speed and duplex mode
+ 1: indicate 100Mbps half duplex mode
+ 2: indicate 100Mbps full duplex mode
+ 3: indicate 10Mbps half duplex mode
+ 4: indicate 10Mbps full duplex mode
+ 5: indicate 1000Mbps full duplex mode
+
+ Note:
+ if EEPROM have been set to the force mode, this option is ignored
+ by driver.
+*/
+VELOCITY_PARAM(speed_duplex, "Setting the speed and duplex mode");
+
+#define WOL_OPT_DEF 0
+#define WOL_OPT_MIN 0
+#define WOL_OPT_MAX 7
+/* wol_opts[] is used for controlling wake on lan behavior.
+ 0: Wake up if recevied a magic packet. (Default)
+ 1: Wake up if link status is on/off.
+ 2: Wake up if recevied an arp packet.
+ 4: Wake up if recevied any unicast packet.
+ Those value can be sumed up to support more than one option.
+*/
+VELOCITY_PARAM(wol_opts, "Wake On Lan options");
+
+static int rx_copybreak = 200;
+module_param(rx_copybreak, int, 0644);
+MODULE_PARM_DESC(rx_copybreak, "Copy breakpoint for copy-only-tiny-frames");
+
+/*
+ * Internal board variants. At the moment we have only one
+ */
+static struct velocity_info_tbl chip_info_table[] = {
+ {CHIP_TYPE_VT6110, "VIA Networking Velocity Family Gigabit Ethernet Adapter", 1, 0x00FFFFFFUL},
+ { }
+};
+
+/*
+ * Describe the PCI device identifiers that we support in this
+ * device driver. Used for hotplug autoloading.
+ */
+
+static const struct pci_device_id velocity_pci_id_table[] = {
+ { PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_612X) },
+ { }
+};
+
+MODULE_DEVICE_TABLE(pci, velocity_pci_id_table);
+
+/*
+ * Describe the OF device identifiers that we support in this
+ * device driver. Used for devicetree nodes.
+ */
+static const struct of_device_id velocity_of_ids[] = {
+ { .compatible = "via,velocity-vt6110", .data = &chip_info_table[0] },
+ { /* Sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, velocity_of_ids);
+
+/**
+ * get_chip_name - identifier to name
+ * @chip_id: chip identifier
+ *
+ * Given a chip identifier return a suitable description. Returns
+ * a pointer a static string valid while the driver is loaded.
+ */
+static const char *get_chip_name(enum chip_type chip_id)
+{
+ int i;
+ for (i = 0; chip_info_table[i].name != NULL; i++)
+ if (chip_info_table[i].chip_id == chip_id)
+ break;
+ return chip_info_table[i].name;
+}
+
+/**
+ * velocity_set_int_opt - parser for integer options
+ * @opt: pointer to option value
+ * @val: value the user requested (or -1 for default)
+ * @min: lowest value allowed
+ * @max: highest value allowed
+ * @def: default value
+ * @name: property name
+ *
+ * Set an integer property in the module options. This function does
+ * all the verification and checking as well as reporting so that
+ * we don't duplicate code for each option.
+ */
+static void velocity_set_int_opt(int *opt, int val, int min, int max, int def,
+ char *name)
+{
+ if (val == -1)
+ *opt = def;
+ else if (val < min || val > max) {
+ pr_notice("the value of parameter %s is invalid, the valid range is (%d-%d)\n",
+ name, min, max);
+ *opt = def;
+ } else {
+ pr_info("set value of parameter %s to %d\n", name, val);
+ *opt = val;
+ }
+}
+
+/**
+ * velocity_set_bool_opt - parser for boolean options
+ * @opt: pointer to option value
+ * @val: value the user requested (or -1 for default)
+ * @def: default value (yes/no)
+ * @flag: numeric value to set for true.
+ * @name: property name
+ *
+ * Set a boolean property in the module options. This function does
+ * all the verification and checking as well as reporting so that
+ * we don't duplicate code for each option.
+ */
+static void velocity_set_bool_opt(u32 *opt, int val, int def, u32 flag,
+ char *name)
+{
+ (*opt) &= (~flag);
+ if (val == -1)
+ *opt |= (def ? flag : 0);
+ else if (val < 0 || val > 1) {
+ pr_notice("the value of parameter %s is invalid, the valid range is (%d-%d)\n",
+ name, 0, 1);
+ *opt |= (def ? flag : 0);
+ } else {
+ pr_info("set parameter %s to %s\n",
+ name, val ? "TRUE" : "FALSE");
+ *opt |= (val ? flag : 0);
+ }
+}
+
+/**
+ * velocity_get_options - set options on device
+ * @opts: option structure for the device
+ * @index: index of option to use in module options array
+ *
+ * Turn the module and command options into a single structure
+ * for the current device
+ */
+static void velocity_get_options(struct velocity_opt *opts, int index)
+{
+
+ velocity_set_int_opt(&opts->rx_thresh, rx_thresh[index],
+ RX_THRESH_MIN, RX_THRESH_MAX, RX_THRESH_DEF,
+ "rx_thresh");
+ velocity_set_int_opt(&opts->DMA_length, DMA_length[index],
+ DMA_LENGTH_MIN, DMA_LENGTH_MAX, DMA_LENGTH_DEF,
+ "DMA_length");
+ velocity_set_int_opt(&opts->numrx, RxDescriptors[index],
+ RX_DESC_MIN, RX_DESC_MAX, RX_DESC_DEF,
+ "RxDescriptors");
+ velocity_set_int_opt(&opts->numtx, TxDescriptors[index],
+ TX_DESC_MIN, TX_DESC_MAX, TX_DESC_DEF,
+ "TxDescriptors");
+
+ velocity_set_int_opt(&opts->flow_cntl, flow_control[index],
+ FLOW_CNTL_MIN, FLOW_CNTL_MAX, FLOW_CNTL_DEF,
+ "flow_control");
+ velocity_set_bool_opt(&opts->flags, IP_byte_align[index],
+ IP_ALIG_DEF, VELOCITY_FLAGS_IP_ALIGN,
+ "IP_byte_align");
+ velocity_set_int_opt((int *) &opts->spd_dpx, speed_duplex[index],
+ MED_LNK_MIN, MED_LNK_MAX, MED_LNK_DEF,
+ "Media link mode");
+ velocity_set_int_opt(&opts->wol_opts, wol_opts[index],
+ WOL_OPT_MIN, WOL_OPT_MAX, WOL_OPT_DEF,
+ "Wake On Lan options");
+ opts->numrx = (opts->numrx & ~3);
+}
+
+/**
+ * velocity_init_cam_filter - initialise CAM
+ * @vptr: velocity to program
+ *
+ * Initialize the content addressable memory used for filters. Load
+ * appropriately according to the presence of VLAN
+ */
+static void velocity_init_cam_filter(struct velocity_info *vptr)
+{
+ struct mac_regs __iomem *regs = vptr->mac_regs;
+ unsigned int vid, i = 0;
+
+ /* Turn on MCFG_PQEN, turn off MCFG_RTGOPT */
+ WORD_REG_BITS_SET(MCFG_PQEN, MCFG_RTGOPT, &regs->MCFG);
+ WORD_REG_BITS_ON(MCFG_VIDFR, &regs->MCFG);
+
+ /* Disable all CAMs */
+ memset(vptr->vCAMmask, 0, sizeof(u8) * 8);
+ memset(vptr->mCAMmask, 0, sizeof(u8) * 8);
+ mac_set_vlan_cam_mask(regs, vptr->vCAMmask);
+ mac_set_cam_mask(regs, vptr->mCAMmask);
+
+ /* Enable VCAMs */
+ for_each_set_bit(vid, vptr->active_vlans, VLAN_N_VID) {
+ mac_set_vlan_cam(regs, i, (u8 *) &vid);
+ vptr->vCAMmask[i / 8] |= 0x1 << (i % 8);
+ if (++i >= VCAM_SIZE)
+ break;
+ }
+ mac_set_vlan_cam_mask(regs, vptr->vCAMmask);
+}
+
+static int velocity_vlan_rx_add_vid(struct net_device *dev,
+ __be16 proto, u16 vid)
+{
+ struct velocity_info *vptr = netdev_priv(dev);
+
+ spin_lock_irq(&vptr->lock);
+ set_bit(vid, vptr->active_vlans);
+ velocity_init_cam_filter(vptr);
+ spin_unlock_irq(&vptr->lock);
+ return 0;
+}
+
+static int velocity_vlan_rx_kill_vid(struct net_device *dev,
+ __be16 proto, u16 vid)
+{
+ struct velocity_info *vptr = netdev_priv(dev);
+
+ spin_lock_irq(&vptr->lock);
+ clear_bit(vid, vptr->active_vlans);
+ velocity_init_cam_filter(vptr);
+ spin_unlock_irq(&vptr->lock);
+ return 0;
+}
+
+static void velocity_init_rx_ring_indexes(struct velocity_info *vptr)
+{
+ vptr->rx.dirty = vptr->rx.filled = vptr->rx.curr = 0;
+}
+
+/**
+ * velocity_rx_reset - handle a receive reset
+ * @vptr: velocity we are resetting
+ *
+ * Reset the ownership and status for the receive ring side.
+ * Hand all the receive queue to the NIC.
+ */
+static void velocity_rx_reset(struct velocity_info *vptr)
+{
+
+ struct mac_regs __iomem *regs = vptr->mac_regs;
+ int i;
+
+ velocity_init_rx_ring_indexes(vptr);
+
+ /*
+ * Init state, all RD entries belong to the NIC
+ */
+ for (i = 0; i < vptr->options.numrx; ++i)
+ vptr->rx.ring[i].rdesc0.len |= OWNED_BY_NIC;
+
+ writew(vptr->options.numrx, &regs->RBRDU);
+ writel(vptr->rx.pool_dma, &regs->RDBaseLo);
+ writew(0, &regs->RDIdx);
+ writew(vptr->options.numrx - 1, &regs->RDCSize);
+}
+
+/**
+ * velocity_get_opt_media_mode - get media selection
+ * @vptr: velocity adapter
+ *
+ * Get the media mode stored in EEPROM or module options and load
+ * mii_status accordingly. The requested link state information
+ * is also returned.
+ */
+static u32 velocity_get_opt_media_mode(struct velocity_info *vptr)
+{
+ u32 status = 0;
+
+ switch (vptr->options.spd_dpx) {
+ case SPD_DPX_AUTO:
+ status = VELOCITY_AUTONEG_ENABLE;
+ break;
+ case SPD_DPX_100_FULL:
+ status = VELOCITY_SPEED_100 | VELOCITY_DUPLEX_FULL;
+ break;
+ case SPD_DPX_10_FULL:
+ status = VELOCITY_SPEED_10 | VELOCITY_DUPLEX_FULL;
+ break;
+ case SPD_DPX_100_HALF:
+ status = VELOCITY_SPEED_100;
+ break;
+ case SPD_DPX_10_HALF:
+ status = VELOCITY_SPEED_10;
+ break;
+ case SPD_DPX_1000_FULL:
+ status = VELOCITY_SPEED_1000 | VELOCITY_DUPLEX_FULL;
+ break;
+ }
+ vptr->mii_status = status;
+ return status;
+}
+
+/**
+ * safe_disable_mii_autopoll - autopoll off
+ * @regs: velocity registers
+ *
+ * Turn off the autopoll and wait for it to disable on the chip
+ */
+static void safe_disable_mii_autopoll(struct mac_regs __iomem *regs)
+{
+ u16 ww;
+
+ /* turn off MAUTO */
+ writeb(0, &regs->MIICR);
+ for (ww = 0; ww < W_MAX_TIMEOUT; ww++) {
+ udelay(1);
+ if (BYTE_REG_BITS_IS_ON(MIISR_MIDLE, &regs->MIISR))
+ break;
+ }
+}
+
+/**
+ * enable_mii_autopoll - turn on autopolling
+ * @regs: velocity registers
+ *
+ * Enable the MII link status autopoll feature on the Velocity
+ * hardware. Wait for it to enable.
+ */
+static void enable_mii_autopoll(struct mac_regs __iomem *regs)
+{
+ int ii;
+
+ writeb(0, &(regs->MIICR));
+ writeb(MIIADR_SWMPL, &regs->MIIADR);
+
+ for (ii = 0; ii < W_MAX_TIMEOUT; ii++) {
+ udelay(1);
+ if (BYTE_REG_BITS_IS_ON(MIISR_MIDLE, &regs->MIISR))
+ break;
+ }
+
+ writeb(MIICR_MAUTO, &regs->MIICR);
+
+ for (ii = 0; ii < W_MAX_TIMEOUT; ii++) {
+ udelay(1);
+ if (!BYTE_REG_BITS_IS_ON(MIISR_MIDLE, &regs->MIISR))
+ break;
+ }
+
+}
+
+/**
+ * velocity_mii_read - read MII data
+ * @regs: velocity registers
+ * @index: MII register index
+ * @data: buffer for received data
+ *
+ * Perform a single read of an MII 16bit register. Returns zero
+ * on success or -ETIMEDOUT if the PHY did not respond.
+ */
+static int velocity_mii_read(struct mac_regs __iomem *regs, u8 index, u16 *data)
+{
+ u16 ww;
+
+ /*
+ * Disable MIICR_MAUTO, so that mii addr can be set normally
+ */
+ safe_disable_mii_autopoll(regs);
+
+ writeb(index, &regs->MIIADR);
+
+ BYTE_REG_BITS_ON(MIICR_RCMD, &regs->MIICR);
+
+ for (ww = 0; ww < W_MAX_TIMEOUT; ww++) {
+ if (!(readb(&regs->MIICR) & MIICR_RCMD))
+ break;
+ }
+
+ *data = readw(&regs->MIIDATA);
+
+ enable_mii_autopoll(regs);
+ if (ww == W_MAX_TIMEOUT)
+ return -ETIMEDOUT;
+ return 0;
+}
+
+/**
+ * mii_check_media_mode - check media state
+ * @regs: velocity registers
+ *
+ * Check the current MII status and determine the link status
+ * accordingly
+ */
+static u32 mii_check_media_mode(struct mac_regs __iomem *regs)
+{
+ u32 status = 0;
+ u16 ANAR;
+
+ if (!MII_REG_BITS_IS_ON(BMSR_LSTATUS, MII_BMSR, regs))
+ status |= VELOCITY_LINK_FAIL;
+
+ if (MII_REG_BITS_IS_ON(ADVERTISE_1000FULL, MII_CTRL1000, regs))
+ status |= VELOCITY_SPEED_1000 | VELOCITY_DUPLEX_FULL;
+ else if (MII_REG_BITS_IS_ON(ADVERTISE_1000HALF, MII_CTRL1000, regs))
+ status |= (VELOCITY_SPEED_1000);
+ else {
+ velocity_mii_read(regs, MII_ADVERTISE, &ANAR);
+ if (ANAR & ADVERTISE_100FULL)
+ status |= (VELOCITY_SPEED_100 | VELOCITY_DUPLEX_FULL);
+ else if (ANAR & ADVERTISE_100HALF)
+ status |= VELOCITY_SPEED_100;
+ else if (ANAR & ADVERTISE_10FULL)
+ status |= (VELOCITY_SPEED_10 | VELOCITY_DUPLEX_FULL);
+ else
+ status |= (VELOCITY_SPEED_10);
+ }
+
+ if (MII_REG_BITS_IS_ON(BMCR_ANENABLE, MII_BMCR, regs)) {
+ velocity_mii_read(regs, MII_ADVERTISE, &ANAR);
+ if ((ANAR & (ADVERTISE_100FULL | ADVERTISE_100HALF | ADVERTISE_10FULL | ADVERTISE_10HALF))
+ == (ADVERTISE_100FULL | ADVERTISE_100HALF | ADVERTISE_10FULL | ADVERTISE_10HALF)) {
+ if (MII_REG_BITS_IS_ON(ADVERTISE_1000HALF | ADVERTISE_1000FULL, MII_CTRL1000, regs))
+ status |= VELOCITY_AUTONEG_ENABLE;
+ }
+ }
+
+ return status;
+}
+
+/**
+ * velocity_mii_write - write MII data
+ * @regs: velocity registers
+ * @mii_addr: MII register index
+ * @data: 16bit data for the MII register
+ *
+ * Perform a single write to an MII 16bit register. Returns zero
+ * on success or -ETIMEDOUT if the PHY did not respond.
+ */
+static int velocity_mii_write(struct mac_regs __iomem *regs, u8 mii_addr, u16 data)
+{
+ u16 ww;
+
+ /*
+ * Disable MIICR_MAUTO, so that mii addr can be set normally
+ */
+ safe_disable_mii_autopoll(regs);
+
+ /* MII reg offset */
+ writeb(mii_addr, &regs->MIIADR);
+ /* set MII data */
+ writew(data, &regs->MIIDATA);
+
+ /* turn on MIICR_WCMD */
+ BYTE_REG_BITS_ON(MIICR_WCMD, &regs->MIICR);
+
+ /* W_MAX_TIMEOUT is the timeout period */
+ for (ww = 0; ww < W_MAX_TIMEOUT; ww++) {
+ udelay(5);
+ if (!(readb(&regs->MIICR) & MIICR_WCMD))
+ break;
+ }
+ enable_mii_autopoll(regs);
+
+ if (ww == W_MAX_TIMEOUT)
+ return -ETIMEDOUT;
+ return 0;
+}
+
+/**
+ * set_mii_flow_control - flow control setup
+ * @vptr: velocity interface
+ *
+ * Set up the flow control on this interface according to
+ * the supplied user/eeprom options.
+ */
+static void set_mii_flow_control(struct velocity_info *vptr)
+{
+ /*Enable or Disable PAUSE in ANAR */
+ switch (vptr->options.flow_cntl) {
+ case FLOW_CNTL_TX:
+ MII_REG_BITS_OFF(ADVERTISE_PAUSE_CAP, MII_ADVERTISE, vptr->mac_regs);
+ MII_REG_BITS_ON(ADVERTISE_PAUSE_ASYM, MII_ADVERTISE, vptr->mac_regs);
+ break;
+
+ case FLOW_CNTL_RX:
+ MII_REG_BITS_ON(ADVERTISE_PAUSE_CAP, MII_ADVERTISE, vptr->mac_regs);
+ MII_REG_BITS_ON(ADVERTISE_PAUSE_ASYM, MII_ADVERTISE, vptr->mac_regs);
+ break;
+
+ case FLOW_CNTL_TX_RX:
+ MII_REG_BITS_ON(ADVERTISE_PAUSE_CAP, MII_ADVERTISE, vptr->mac_regs);
+ MII_REG_BITS_OFF(ADVERTISE_PAUSE_ASYM, MII_ADVERTISE, vptr->mac_regs);
+ break;
+
+ case FLOW_CNTL_DISABLE:
+ MII_REG_BITS_OFF(ADVERTISE_PAUSE_CAP, MII_ADVERTISE, vptr->mac_regs);
+ MII_REG_BITS_OFF(ADVERTISE_PAUSE_ASYM, MII_ADVERTISE, vptr->mac_regs);
+ break;
+ default:
+ break;
+ }
+}
+
+/**
+ * mii_set_auto_on - autonegotiate on
+ * @vptr: velocity
+ *
+ * Enable autonegotation on this interface
+ */
+static void mii_set_auto_on(struct velocity_info *vptr)
+{
+ if (MII_REG_BITS_IS_ON(BMCR_ANENABLE, MII_BMCR, vptr->mac_regs))
+ MII_REG_BITS_ON(BMCR_ANRESTART, MII_BMCR, vptr->mac_regs);
+ else
+ MII_REG_BITS_ON(BMCR_ANENABLE, MII_BMCR, vptr->mac_regs);
+}
+
+static u32 check_connection_type(struct mac_regs __iomem *regs)
+{
+ u32 status = 0;
+ u8 PHYSR0;
+ u16 ANAR;
+ PHYSR0 = readb(&regs->PHYSR0);
+
+ /*
+ if (!(PHYSR0 & PHYSR0_LINKGD))
+ status|=VELOCITY_LINK_FAIL;
+ */
+
+ if (PHYSR0 & PHYSR0_FDPX)
+ status |= VELOCITY_DUPLEX_FULL;
+
+ if (PHYSR0 & PHYSR0_SPDG)
+ status |= VELOCITY_SPEED_1000;
+ else if (PHYSR0 & PHYSR0_SPD10)
+ status |= VELOCITY_SPEED_10;
+ else
+ status |= VELOCITY_SPEED_100;
+
+ if (MII_REG_BITS_IS_ON(BMCR_ANENABLE, MII_BMCR, regs)) {
+ velocity_mii_read(regs, MII_ADVERTISE, &ANAR);
+ if ((ANAR & (ADVERTISE_100FULL | ADVERTISE_100HALF | ADVERTISE_10FULL | ADVERTISE_10HALF))
+ == (ADVERTISE_100FULL | ADVERTISE_100HALF | ADVERTISE_10FULL | ADVERTISE_10HALF)) {
+ if (MII_REG_BITS_IS_ON(ADVERTISE_1000HALF | ADVERTISE_1000FULL, MII_CTRL1000, regs))
+ status |= VELOCITY_AUTONEG_ENABLE;
+ }
+ }
+
+ return status;
+}
+
+/**
+ * velocity_set_media_mode - set media mode
+ * @vptr: velocity adapter
+ * @mii_status: old MII link state
+ *
+ * Check the media link state and configure the flow control
+ * PHY and also velocity hardware setup accordingly. In particular
+ * we need to set up CD polling and frame bursting.
+ */
+static int velocity_set_media_mode(struct velocity_info *vptr, u32 mii_status)
+{
+ struct mac_regs __iomem *regs = vptr->mac_regs;
+
+ vptr->mii_status = mii_check_media_mode(vptr->mac_regs);
+
+ /* Set mii link status */
+ set_mii_flow_control(vptr);
+
+ if (PHYID_GET_PHY_ID(vptr->phy_id) == PHYID_CICADA_CS8201)
+ MII_REG_BITS_ON(AUXCR_MDPPS, MII_NCONFIG, vptr->mac_regs);
+
+ /*
+ * If connection type is AUTO
+ */
+ if (mii_status & VELOCITY_AUTONEG_ENABLE) {
+ netdev_info(vptr->netdev, "Velocity is in AUTO mode\n");
+ /* clear force MAC mode bit */
+ BYTE_REG_BITS_OFF(CHIPGCR_FCMODE, &regs->CHIPGCR);
+ /* set duplex mode of MAC according to duplex mode of MII */
+ MII_REG_BITS_ON(ADVERTISE_100FULL | ADVERTISE_100HALF | ADVERTISE_10FULL | ADVERTISE_10HALF, MII_ADVERTISE, vptr->mac_regs);
+ MII_REG_BITS_ON(ADVERTISE_1000FULL | ADVERTISE_1000HALF, MII_CTRL1000, vptr->mac_regs);
+ MII_REG_BITS_ON(BMCR_SPEED1000, MII_BMCR, vptr->mac_regs);
+
+ /* enable AUTO-NEGO mode */
+ mii_set_auto_on(vptr);
+ } else {
+ u16 CTRL1000;
+ u16 ANAR;
+ u8 CHIPGCR;
+
+ /*
+ * 1. if it's 3119, disable frame bursting in halfduplex mode
+ * and enable it in fullduplex mode
+ * 2. set correct MII/GMII and half/full duplex mode in CHIPGCR
+ * 3. only enable CD heart beat counter in 10HD mode
+ */
+
+ /* set force MAC mode bit */
+ BYTE_REG_BITS_ON(CHIPGCR_FCMODE, &regs->CHIPGCR);
+
+ CHIPGCR = readb(&regs->CHIPGCR);
+
+ if (mii_status & VELOCITY_SPEED_1000)
+ CHIPGCR |= CHIPGCR_FCGMII;
+ else
+ CHIPGCR &= ~CHIPGCR_FCGMII;
+
+ if (mii_status & VELOCITY_DUPLEX_FULL) {
+ CHIPGCR |= CHIPGCR_FCFDX;
+ writeb(CHIPGCR, &regs->CHIPGCR);
+ netdev_info(vptr->netdev,
+ "set Velocity to forced full mode\n");
+ if (vptr->rev_id < REV_ID_VT3216_A0)
+ BYTE_REG_BITS_OFF(TCR_TB2BDIS, &regs->TCR);
+ } else {
+ CHIPGCR &= ~CHIPGCR_FCFDX;
+ netdev_info(vptr->netdev,
+ "set Velocity to forced half mode\n");
+ writeb(CHIPGCR, &regs->CHIPGCR);
+ if (vptr->rev_id < REV_ID_VT3216_A0)
+ BYTE_REG_BITS_ON(TCR_TB2BDIS, &regs->TCR);
+ }
+
+ velocity_mii_read(vptr->mac_regs, MII_CTRL1000, &CTRL1000);
+ CTRL1000 &= ~(ADVERTISE_1000FULL | ADVERTISE_1000HALF);
+ if ((mii_status & VELOCITY_SPEED_1000) &&
+ (mii_status & VELOCITY_DUPLEX_FULL)) {
+ CTRL1000 |= ADVERTISE_1000FULL;
+ }
+ velocity_mii_write(vptr->mac_regs, MII_CTRL1000, CTRL1000);
+
+ if (!(mii_status & VELOCITY_DUPLEX_FULL) && (mii_status & VELOCITY_SPEED_10))
+ BYTE_REG_BITS_OFF(TESTCFG_HBDIS, &regs->TESTCFG);
+ else
+ BYTE_REG_BITS_ON(TESTCFG_HBDIS, &regs->TESTCFG);
+
+ /* MII_REG_BITS_OFF(BMCR_SPEED1000, MII_BMCR, vptr->mac_regs); */
+ velocity_mii_read(vptr->mac_regs, MII_ADVERTISE, &ANAR);
+ ANAR &= (~(ADVERTISE_100FULL | ADVERTISE_100HALF | ADVERTISE_10FULL | ADVERTISE_10HALF));
+ if (mii_status & VELOCITY_SPEED_100) {
+ if (mii_status & VELOCITY_DUPLEX_FULL)
+ ANAR |= ADVERTISE_100FULL;
+ else
+ ANAR |= ADVERTISE_100HALF;
+ } else if (mii_status & VELOCITY_SPEED_10) {
+ if (mii_status & VELOCITY_DUPLEX_FULL)
+ ANAR |= ADVERTISE_10FULL;
+ else
+ ANAR |= ADVERTISE_10HALF;
+ }
+ velocity_mii_write(vptr->mac_regs, MII_ADVERTISE, ANAR);
+ /* enable AUTO-NEGO mode */
+ mii_set_auto_on(vptr);
+ /* MII_REG_BITS_ON(BMCR_ANENABLE, MII_BMCR, vptr->mac_regs); */
+ }
+ /* vptr->mii_status=mii_check_media_mode(vptr->mac_regs); */
+ /* vptr->mii_status=check_connection_type(vptr->mac_regs); */
+ return VELOCITY_LINK_CHANGE;
+}
+
+/**
+ * velocity_print_link_status - link status reporting
+ * @vptr: velocity to report on
+ *
+ * Turn the link status of the velocity card into a kernel log
+ * description of the new link state, detailing speed and duplex
+ * status
+ */
+static void velocity_print_link_status(struct velocity_info *vptr)
+{
+ const char *link;
+ const char *speed;
+ const char *duplex;
+
+ if (vptr->mii_status & VELOCITY_LINK_FAIL) {
+ netdev_notice(vptr->netdev, "failed to detect cable link\n");
+ return;
+ }
+
+ if (vptr->options.spd_dpx == SPD_DPX_AUTO) {
+ link = "auto-negotiation";
+
+ if (vptr->mii_status & VELOCITY_SPEED_1000)
+ speed = "1000";
+ else if (vptr->mii_status & VELOCITY_SPEED_100)
+ speed = "100";
+ else
+ speed = "10";
+
+ if (vptr->mii_status & VELOCITY_DUPLEX_FULL)
+ duplex = "full";
+ else
+ duplex = "half";
+ } else {
+ link = "forced";
+
+ switch (vptr->options.spd_dpx) {
+ case SPD_DPX_1000_FULL:
+ speed = "1000";
+ duplex = "full";
+ break;
+ case SPD_DPX_100_HALF:
+ speed = "100";
+ duplex = "half";
+ break;
+ case SPD_DPX_100_FULL:
+ speed = "100";
+ duplex = "full";
+ break;
+ case SPD_DPX_10_HALF:
+ speed = "10";
+ duplex = "half";
+ break;
+ case SPD_DPX_10_FULL:
+ speed = "10";
+ duplex = "full";
+ break;
+ default:
+ speed = "unknown";
+ duplex = "unknown";
+ break;
+ }
+ }
+ netdev_notice(vptr->netdev, "Link %s speed %sM bps %s duplex\n",
+ link, speed, duplex);
+}
+
+/**
+ * enable_flow_control_ability - flow control
+ * @vptr: veloity to configure
+ *
+ * Set up flow control according to the flow control options
+ * determined by the eeprom/configuration.
+ */
+static void enable_flow_control_ability(struct velocity_info *vptr)
+{
+
+ struct mac_regs __iomem *regs = vptr->mac_regs;
+
+ switch (vptr->options.flow_cntl) {
+
+ case FLOW_CNTL_DEFAULT:
+ if (BYTE_REG_BITS_IS_ON(PHYSR0_RXFLC, &regs->PHYSR0))
+ writel(CR0_FDXRFCEN, &regs->CR0Set);
+ else
+ writel(CR0_FDXRFCEN, &regs->CR0Clr);
+
+ if (BYTE_REG_BITS_IS_ON(PHYSR0_TXFLC, &regs->PHYSR0))
+ writel(CR0_FDXTFCEN, &regs->CR0Set);
+ else
+ writel(CR0_FDXTFCEN, &regs->CR0Clr);
+ break;
+
+ case FLOW_CNTL_TX:
+ writel(CR0_FDXTFCEN, &regs->CR0Set);
+ writel(CR0_FDXRFCEN, &regs->CR0Clr);
+ break;
+
+ case FLOW_CNTL_RX:
+ writel(CR0_FDXRFCEN, &regs->CR0Set);
+ writel(CR0_FDXTFCEN, &regs->CR0Clr);
+ break;
+
+ case FLOW_CNTL_TX_RX:
+ writel(CR0_FDXTFCEN, &regs->CR0Set);
+ writel(CR0_FDXRFCEN, &regs->CR0Set);
+ break;
+
+ case FLOW_CNTL_DISABLE:
+ writel(CR0_FDXRFCEN, &regs->CR0Clr);
+ writel(CR0_FDXTFCEN, &regs->CR0Clr);
+ break;
+
+ default:
+ break;
+ }
+
+}
+
+/**
+ * velocity_soft_reset - soft reset
+ * @vptr: velocity to reset
+ *
+ * Kick off a soft reset of the velocity adapter and then poll
+ * until the reset sequence has completed before returning.
+ */
+static int velocity_soft_reset(struct velocity_info *vptr)
+{
+ struct mac_regs __iomem *regs = vptr->mac_regs;
+ int i = 0;
+
+ writel(CR0_SFRST, &regs->CR0Set);
+
+ for (i = 0; i < W_MAX_TIMEOUT; i++) {
+ udelay(5);
+ if (!DWORD_REG_BITS_IS_ON(CR0_SFRST, &regs->CR0Set))
+ break;
+ }
+
+ if (i == W_MAX_TIMEOUT) {
+ writel(CR0_FORSRST, &regs->CR0Set);
+ /* FIXME: PCI POSTING */
+ /* delay 2ms */
+ mdelay(2);
+ }
+ return 0;
+}
+
+/**
+ * velocity_set_multi - filter list change callback
+ * @dev: network device
+ *
+ * Called by the network layer when the filter lists need to change
+ * for a velocity adapter. Reload the CAMs with the new address
+ * filter ruleset.
+ */
+static void velocity_set_multi(struct net_device *dev)
+{
+ struct velocity_info *vptr = netdev_priv(dev);
+ struct mac_regs __iomem *regs = vptr->mac_regs;
+ u8 rx_mode;
+ int i;
+ struct netdev_hw_addr *ha;
+
+ if (dev->flags & IFF_PROMISC) { /* Set promiscuous. */
+ writel(0xffffffff, &regs->MARCAM[0]);
+ writel(0xffffffff, &regs->MARCAM[4]);
+ rx_mode = (RCR_AM | RCR_AB | RCR_PROM);
+ } else if ((netdev_mc_count(dev) > vptr->multicast_limit) ||
+ (dev->flags & IFF_ALLMULTI)) {
+ writel(0xffffffff, &regs->MARCAM[0]);
+ writel(0xffffffff, &regs->MARCAM[4]);
+ rx_mode = (RCR_AM | RCR_AB);
+ } else {
+ int offset = MCAM_SIZE - vptr->multicast_limit;
+ mac_get_cam_mask(regs, vptr->mCAMmask);
+
+ i = 0;
+ netdev_for_each_mc_addr(ha, dev) {
+ mac_set_cam(regs, i + offset, ha->addr);
+ vptr->mCAMmask[(offset + i) / 8] |= 1 << ((offset + i) & 7);
+ i++;
+ }
+
+ mac_set_cam_mask(regs, vptr->mCAMmask);
+ rx_mode = RCR_AM | RCR_AB | RCR_AP;
+ }
+ if (dev->mtu > 1500)
+ rx_mode |= RCR_AL;
+
+ BYTE_REG_BITS_ON(rx_mode, &regs->RCR);
+
+}
+
+/*
+ * MII access , media link mode setting functions
+ */
+
+/**
+ * mii_init - set up MII
+ * @vptr: velocity adapter
+ * @mii_status: links tatus
+ *
+ * Set up the PHY for the current link state.
+ */
+static void mii_init(struct velocity_info *vptr, u32 mii_status)
+{
+ u16 BMCR;
+
+ switch (PHYID_GET_PHY_ID(vptr->phy_id)) {
+ case PHYID_ICPLUS_IP101A:
+ MII_REG_BITS_ON((ADVERTISE_PAUSE_ASYM | ADVERTISE_PAUSE_CAP),
+ MII_ADVERTISE, vptr->mac_regs);
+ if (vptr->mii_status & VELOCITY_DUPLEX_FULL)
+ MII_REG_BITS_ON(TCSR_ECHODIS, MII_SREVISION,
+ vptr->mac_regs);
+ else
+ MII_REG_BITS_OFF(TCSR_ECHODIS, MII_SREVISION,
+ vptr->mac_regs);
+ MII_REG_BITS_ON(PLED_LALBE, MII_TPISTATUS, vptr->mac_regs);
+ break;
+ case PHYID_CICADA_CS8201:
+ /*
+ * Reset to hardware default
+ */
+ MII_REG_BITS_OFF((ADVERTISE_PAUSE_ASYM | ADVERTISE_PAUSE_CAP), MII_ADVERTISE, vptr->mac_regs);
+ /*
+ * Turn on ECHODIS bit in NWay-forced full mode and turn it
+ * off it in NWay-forced half mode for NWay-forced v.s.
+ * legacy-forced issue.
+ */
+ if (vptr->mii_status & VELOCITY_DUPLEX_FULL)
+ MII_REG_BITS_ON(TCSR_ECHODIS, MII_SREVISION, vptr->mac_regs);
+ else
+ MII_REG_BITS_OFF(TCSR_ECHODIS, MII_SREVISION, vptr->mac_regs);
+ /*
+ * Turn on Link/Activity LED enable bit for CIS8201
+ */
+ MII_REG_BITS_ON(PLED_LALBE, MII_TPISTATUS, vptr->mac_regs);
+ break;
+ case PHYID_VT3216_32BIT:
+ case PHYID_VT3216_64BIT:
+ /*
+ * Reset to hardware default
+ */
+ MII_REG_BITS_ON((ADVERTISE_PAUSE_ASYM | ADVERTISE_PAUSE_CAP), MII_ADVERTISE, vptr->mac_regs);
+ /*
+ * Turn on ECHODIS bit in NWay-forced full mode and turn it
+ * off it in NWay-forced half mode for NWay-forced v.s.
+ * legacy-forced issue
+ */
+ if (vptr->mii_status & VELOCITY_DUPLEX_FULL)
+ MII_REG_BITS_ON(TCSR_ECHODIS, MII_SREVISION, vptr->mac_regs);
+ else
+ MII_REG_BITS_OFF(TCSR_ECHODIS, MII_SREVISION, vptr->mac_regs);
+ break;
+
+ case PHYID_MARVELL_1000:
+ case PHYID_MARVELL_1000S:
+ /*
+ * Assert CRS on Transmit
+ */
+ MII_REG_BITS_ON(PSCR_ACRSTX, MII_REG_PSCR, vptr->mac_regs);
+ /*
+ * Reset to hardware default
+ */
+ MII_REG_BITS_ON((ADVERTISE_PAUSE_ASYM | ADVERTISE_PAUSE_CAP), MII_ADVERTISE, vptr->mac_regs);
+ break;
+ default:
+ ;
+ }
+ velocity_mii_read(vptr->mac_regs, MII_BMCR, &BMCR);
+ if (BMCR & BMCR_ISOLATE) {
+ BMCR &= ~BMCR_ISOLATE;
+ velocity_mii_write(vptr->mac_regs, MII_BMCR, BMCR);
+ }
+}
+
+/**
+ * setup_queue_timers - Setup interrupt timers
+ * @vptr: velocity adapter
+ *
+ * Setup interrupt frequency during suppression (timeout if the frame
+ * count isn't filled).
+ */
+static void setup_queue_timers(struct velocity_info *vptr)
+{
+ /* Only for newer revisions */
+ if (vptr->rev_id >= REV_ID_VT3216_A0) {
+ u8 txqueue_timer = 0;
+ u8 rxqueue_timer = 0;
+
+ if (vptr->mii_status & (VELOCITY_SPEED_1000 |
+ VELOCITY_SPEED_100)) {
+ txqueue_timer = vptr->options.txqueue_timer;
+ rxqueue_timer = vptr->options.rxqueue_timer;
+ }
+
+ writeb(txqueue_timer, &vptr->mac_regs->TQETMR);
+ writeb(rxqueue_timer, &vptr->mac_regs->RQETMR);
+ }
+}
+
+/**
+ * setup_adaptive_interrupts - Setup interrupt suppression
+ * @vptr: velocity adapter
+ *
+ * The velocity is able to suppress interrupt during high interrupt load.
+ * This function turns on that feature.
+ */
+static void setup_adaptive_interrupts(struct velocity_info *vptr)
+{
+ struct mac_regs __iomem *regs = vptr->mac_regs;
+ u16 tx_intsup = vptr->options.tx_intsup;
+ u16 rx_intsup = vptr->options.rx_intsup;
+
+ /* Setup default interrupt mask (will be changed below) */
+ vptr->int_mask = INT_MASK_DEF;
+
+ /* Set Tx Interrupt Suppression Threshold */
+ writeb(CAMCR_PS0, &regs->CAMCR);
+ if (tx_intsup != 0) {
+ vptr->int_mask &= ~(ISR_PTXI | ISR_PTX0I | ISR_PTX1I |
+ ISR_PTX2I | ISR_PTX3I);
+ writew(tx_intsup, &regs->ISRCTL);
+ } else
+ writew(ISRCTL_TSUPDIS, &regs->ISRCTL);
+
+ /* Set Rx Interrupt Suppression Threshold */
+ writeb(CAMCR_PS1, &regs->CAMCR);
+ if (rx_intsup != 0) {
+ vptr->int_mask &= ~ISR_PRXI;
+ writew(rx_intsup, &regs->ISRCTL);
+ } else
+ writew(ISRCTL_RSUPDIS, &regs->ISRCTL);
+
+ /* Select page to interrupt hold timer */
+ writeb(0, &regs->CAMCR);
+}
+
+/**
+ * velocity_init_registers - initialise MAC registers
+ * @vptr: velocity to init
+ * @type: type of initialisation (hot or cold)
+ *
+ * Initialise the MAC on a reset or on first set up on the
+ * hardware.
+ */
+static void velocity_init_registers(struct velocity_info *vptr,
+ enum velocity_init_type type)
+{
+ struct mac_regs __iomem *regs = vptr->mac_regs;
+ struct net_device *netdev = vptr->netdev;
+ int i, mii_status;
+
+ mac_wol_reset(regs);
+
+ switch (type) {
+ case VELOCITY_INIT_RESET:
+ case VELOCITY_INIT_WOL:
+
+ netif_stop_queue(netdev);
+
+ /*
+ * Reset RX to prevent RX pointer not on the 4X location
+ */
+ velocity_rx_reset(vptr);
+ mac_rx_queue_run(regs);
+ mac_rx_queue_wake(regs);
+
+ mii_status = velocity_get_opt_media_mode(vptr);
+ if (velocity_set_media_mode(vptr, mii_status) != VELOCITY_LINK_CHANGE) {
+ velocity_print_link_status(vptr);
+ if (!(vptr->mii_status & VELOCITY_LINK_FAIL))
+ netif_wake_queue(netdev);
+ }
+
+ enable_flow_control_ability(vptr);
+
+ mac_clear_isr(regs);
+ writel(CR0_STOP, &regs->CR0Clr);
+ writel((CR0_DPOLL | CR0_TXON | CR0_RXON | CR0_STRT),
+ &regs->CR0Set);
+
+ break;
+
+ case VELOCITY_INIT_COLD:
+ default:
+ /*
+ * Do reset
+ */
+ velocity_soft_reset(vptr);
+ mdelay(5);
+
+ if (!vptr->no_eeprom) {
+ mac_eeprom_reload(regs);
+ for (i = 0; i < 6; i++)
+ writeb(netdev->dev_addr[i], regs->PAR + i);
+ }
+
+ /*
+ * clear Pre_ACPI bit.
+ */
+ BYTE_REG_BITS_OFF(CFGA_PACPI, &(regs->CFGA));
+ mac_set_rx_thresh(regs, vptr->options.rx_thresh);
+ mac_set_dma_length(regs, vptr->options.DMA_length);
+
+ writeb(WOLCFG_SAM | WOLCFG_SAB, &regs->WOLCFGSet);
+ /*
+ * Back off algorithm use original IEEE standard
+ */
+ BYTE_REG_BITS_SET(CFGB_OFSET, (CFGB_CRANDOM | CFGB_CAP | CFGB_MBA | CFGB_BAKOPT), &regs->CFGB);
+
+ /*
+ * Init CAM filter
+ */
+ velocity_init_cam_filter(vptr);
+
+ /*
+ * Set packet filter: Receive directed and broadcast address
+ */
+ velocity_set_multi(netdev);
+
+ /*
+ * Enable MII auto-polling
+ */
+ enable_mii_autopoll(regs);
+
+ setup_adaptive_interrupts(vptr);
+
+ writel(vptr->rx.pool_dma, &regs->RDBaseLo);
+ writew(vptr->options.numrx - 1, &regs->RDCSize);
+ mac_rx_queue_run(regs);
+ mac_rx_queue_wake(regs);
+
+ writew(vptr->options.numtx - 1, &regs->TDCSize);
+
+ for (i = 0; i < vptr->tx.numq; i++) {
+ writel(vptr->tx.pool_dma[i], &regs->TDBaseLo[i]);
+ mac_tx_queue_run(regs, i);
+ }
+
+ init_flow_control_register(vptr);
+
+ writel(CR0_STOP, &regs->CR0Clr);
+ writel((CR0_DPOLL | CR0_TXON | CR0_RXON | CR0_STRT), &regs->CR0Set);
+
+ mii_status = velocity_get_opt_media_mode(vptr);
+ netif_stop_queue(netdev);
+
+ mii_init(vptr, mii_status);
+
+ if (velocity_set_media_mode(vptr, mii_status) != VELOCITY_LINK_CHANGE) {
+ velocity_print_link_status(vptr);
+ if (!(vptr->mii_status & VELOCITY_LINK_FAIL))
+ netif_wake_queue(netdev);
+ }
+
+ enable_flow_control_ability(vptr);
+ mac_hw_mibs_init(regs);
+ mac_write_int_mask(vptr->int_mask, regs);
+ mac_clear_isr(regs);
+
+ }
+}
+
+static void velocity_give_many_rx_descs(struct velocity_info *vptr)
+{
+ struct mac_regs __iomem *regs = vptr->mac_regs;
+ int avail, dirty, unusable;
+
+ /*
+ * RD number must be equal to 4X per hardware spec
+ * (programming guide rev 1.20, p.13)
+ */
+ if (vptr->rx.filled < 4)
+ return;
+
+ wmb();
+
+ unusable = vptr->rx.filled & 0x0003;
+ dirty = vptr->rx.dirty - unusable;
+ for (avail = vptr->rx.filled & 0xfffc; avail; avail--) {
+ dirty = (dirty > 0) ? dirty - 1 : vptr->options.numrx - 1;
+ vptr->rx.ring[dirty].rdesc0.len |= OWNED_BY_NIC;
+ }
+
+ writew(vptr->rx.filled & 0xfffc, &regs->RBRDU);
+ vptr->rx.filled = unusable;
+}
+
+/**
+ * velocity_init_dma_rings - set up DMA rings
+ * @vptr: Velocity to set up
+ *
+ * Allocate PCI mapped DMA rings for the receive and transmit layer
+ * to use.
+ */
+static int velocity_init_dma_rings(struct velocity_info *vptr)
+{
+ struct velocity_opt *opt = &vptr->options;
+ const unsigned int rx_ring_size = opt->numrx * sizeof(struct rx_desc);
+ const unsigned int tx_ring_size = opt->numtx * sizeof(struct tx_desc);
+ dma_addr_t pool_dma;
+ void *pool;
+ unsigned int i;
+
+ /*
+ * Allocate all RD/TD rings a single pool.
+ *
+ * dma_alloc_coherent() fulfills the requirement for 64 bytes
+ * alignment
+ */
+ pool = dma_alloc_coherent(vptr->dev, tx_ring_size * vptr->tx.numq +
+ rx_ring_size, &pool_dma, GFP_ATOMIC);
+ if (!pool) {
+ dev_err(vptr->dev, "%s : DMA memory allocation failed.\n",
+ vptr->netdev->name);
+ return -ENOMEM;
+ }
+
+ vptr->rx.ring = pool;
+ vptr->rx.pool_dma = pool_dma;
+
+ pool += rx_ring_size;
+ pool_dma += rx_ring_size;
+
+ for (i = 0; i < vptr->tx.numq; i++) {
+ vptr->tx.rings[i] = pool;
+ vptr->tx.pool_dma[i] = pool_dma;
+ pool += tx_ring_size;
+ pool_dma += tx_ring_size;
+ }
+
+ return 0;
+}
+
+static void velocity_set_rxbufsize(struct velocity_info *vptr, int mtu)
+{
+ vptr->rx.buf_sz = (mtu <= ETH_DATA_LEN) ? PKT_BUF_SZ : mtu + 32;
+}
+
+/**
+ * velocity_alloc_rx_buf - allocate aligned receive buffer
+ * @vptr: velocity
+ * @idx: ring index
+ *
+ * Allocate a new full sized buffer for the reception of a frame and
+ * map it into PCI space for the hardware to use. The hardware
+ * requires *64* byte alignment of the buffer which makes life
+ * less fun than would be ideal.
+ */
+static int velocity_alloc_rx_buf(struct velocity_info *vptr, int idx)
+{
+ struct rx_desc *rd = &(vptr->rx.ring[idx]);
+ struct velocity_rd_info *rd_info = &(vptr->rx.info[idx]);
+
+ rd_info->skb = netdev_alloc_skb(vptr->netdev, vptr->rx.buf_sz + 64);
+ if (rd_info->skb == NULL)
+ return -ENOMEM;
+
+ /*
+ * Do the gymnastics to get the buffer head for data at
+ * 64byte alignment.
+ */
+ skb_reserve(rd_info->skb,
+ 64 - ((unsigned long) rd_info->skb->data & 63));
+ rd_info->skb_dma = dma_map_single(vptr->dev, rd_info->skb->data,
+ vptr->rx.buf_sz, DMA_FROM_DEVICE);
+
+ /*
+ * Fill in the descriptor to match
+ */
+
+ *((u32 *) & (rd->rdesc0)) = 0;
+ rd->size = cpu_to_le16(vptr->rx.buf_sz) | RX_INTEN;
+ rd->pa_low = cpu_to_le32(rd_info->skb_dma);
+ rd->pa_high = 0;
+ return 0;
+}
+
+
+static int velocity_rx_refill(struct velocity_info *vptr)
+{
+ int dirty = vptr->rx.dirty, done = 0;
+
+ do {
+ struct rx_desc *rd = vptr->rx.ring + dirty;
+
+ /* Fine for an all zero Rx desc at init time as well */
+ if (rd->rdesc0.len & OWNED_BY_NIC)
+ break;
+
+ if (!vptr->rx.info[dirty].skb) {
+ if (velocity_alloc_rx_buf(vptr, dirty) < 0)
+ break;
+ }
+ done++;
+ dirty = (dirty < vptr->options.numrx - 1) ? dirty + 1 : 0;
+ } while (dirty != vptr->rx.curr);
+
+ if (done) {
+ vptr->rx.dirty = dirty;
+ vptr->rx.filled += done;
+ }
+
+ return done;
+}
+
+/**
+ * velocity_free_rd_ring - free receive ring
+ * @vptr: velocity to clean up
+ *
+ * Free the receive buffers for each ring slot and any
+ * attached socket buffers that need to go away.
+ */
+static void velocity_free_rd_ring(struct velocity_info *vptr)
+{
+ int i;
+
+ if (vptr->rx.info == NULL)
+ return;
+
+ for (i = 0; i < vptr->options.numrx; i++) {
+ struct velocity_rd_info *rd_info = &(vptr->rx.info[i]);
+ struct rx_desc *rd = vptr->rx.ring + i;
+
+ memset(rd, 0, sizeof(*rd));
+
+ if (!rd_info->skb)
+ continue;
+ dma_unmap_single(vptr->dev, rd_info->skb_dma, vptr->rx.buf_sz,
+ DMA_FROM_DEVICE);
+ rd_info->skb_dma = 0;
+
+ dev_kfree_skb(rd_info->skb);
+ rd_info->skb = NULL;
+ }
+
+ kfree(vptr->rx.info);
+ vptr->rx.info = NULL;
+}
+
+/**
+ * velocity_init_rd_ring - set up receive ring
+ * @vptr: velocity to configure
+ *
+ * Allocate and set up the receive buffers for each ring slot and
+ * assign them to the network adapter.
+ */
+static int velocity_init_rd_ring(struct velocity_info *vptr)
+{
+ int ret = -ENOMEM;
+
+ vptr->rx.info = kcalloc(vptr->options.numrx,
+ sizeof(struct velocity_rd_info), GFP_KERNEL);
+ if (!vptr->rx.info)
+ goto out;
+
+ velocity_init_rx_ring_indexes(vptr);
+
+ if (velocity_rx_refill(vptr) != vptr->options.numrx) {
+ netdev_err(vptr->netdev, "failed to allocate RX buffer\n");
+ velocity_free_rd_ring(vptr);
+ goto out;
+ }
+
+ ret = 0;
+out:
+ return ret;
+}
+
+/**
+ * velocity_init_td_ring - set up transmit ring
+ * @vptr: velocity
+ *
+ * Set up the transmit ring and chain the ring pointers together.
+ * Returns zero on success or a negative posix errno code for
+ * failure.
+ */
+static int velocity_init_td_ring(struct velocity_info *vptr)
+{
+ int j;
+
+ /* Init the TD ring entries */
+ for (j = 0; j < vptr->tx.numq; j++) {
+
+ vptr->tx.infos[j] = kcalloc(vptr->options.numtx,
+ sizeof(struct velocity_td_info),
+ GFP_KERNEL);
+ if (!vptr->tx.infos[j]) {
+ while (--j >= 0)
+ kfree(vptr->tx.infos[j]);
+ return -ENOMEM;
+ }
+
+ vptr->tx.tail[j] = vptr->tx.curr[j] = vptr->tx.used[j] = 0;
+ }
+ return 0;
+}
+
+/**
+ * velocity_free_dma_rings - free PCI ring pointers
+ * @vptr: Velocity to free from
+ *
+ * Clean up the PCI ring buffers allocated to this velocity.
+ */
+static void velocity_free_dma_rings(struct velocity_info *vptr)
+{
+ const int size = vptr->options.numrx * sizeof(struct rx_desc) +
+ vptr->options.numtx * sizeof(struct tx_desc) * vptr->tx.numq;
+
+ dma_free_coherent(vptr->dev, size, vptr->rx.ring, vptr->rx.pool_dma);
+}
+
+static int velocity_init_rings(struct velocity_info *vptr, int mtu)
+{
+ int ret;
+
+ velocity_set_rxbufsize(vptr, mtu);
+
+ ret = velocity_init_dma_rings(vptr);
+ if (ret < 0)
+ goto out;
+
+ ret = velocity_init_rd_ring(vptr);
+ if (ret < 0)
+ goto err_free_dma_rings_0;
+
+ ret = velocity_init_td_ring(vptr);
+ if (ret < 0)
+ goto err_free_rd_ring_1;
+out:
+ return ret;
+
+err_free_rd_ring_1:
+ velocity_free_rd_ring(vptr);
+err_free_dma_rings_0:
+ velocity_free_dma_rings(vptr);
+ goto out;
+}
+
+/**
+ * velocity_free_tx_buf - free transmit buffer
+ * @vptr: velocity
+ * @tdinfo: buffer
+ * @td: transmit descriptor to free
+ *
+ * Release an transmit buffer. If the buffer was preallocated then
+ * recycle it, if not then unmap the buffer.
+ */
+static void velocity_free_tx_buf(struct velocity_info *vptr,
+ struct velocity_td_info *tdinfo, struct tx_desc *td)
+{
+ struct sk_buff *skb = tdinfo->skb;
+ int i;
+
+ /*
+ * Don't unmap the pre-allocated tx_bufs
+ */
+ for (i = 0; i < tdinfo->nskb_dma; i++) {
+ size_t pktlen = max_t(size_t, skb->len, ETH_ZLEN);
+
+ /* For scatter-gather */
+ if (skb_shinfo(skb)->nr_frags > 0)
+ pktlen = max_t(size_t, pktlen,
+ td->td_buf[i].size & ~TD_QUEUE);
+
+ dma_unmap_single(vptr->dev, tdinfo->skb_dma[i],
+ le16_to_cpu(pktlen), DMA_TO_DEVICE);
+ }
+ dev_consume_skb_irq(skb);
+ tdinfo->skb = NULL;
+}
+
+/*
+ * FIXME: could we merge this with velocity_free_tx_buf ?
+ */
+static void velocity_free_td_ring_entry(struct velocity_info *vptr,
+ int q, int n)
+{
+ struct velocity_td_info *td_info = &(vptr->tx.infos[q][n]);
+ int i;
+
+ if (td_info == NULL)
+ return;
+
+ if (td_info->skb) {
+ for (i = 0; i < td_info->nskb_dma; i++) {
+ if (td_info->skb_dma[i]) {
+ dma_unmap_single(vptr->dev, td_info->skb_dma[i],
+ td_info->skb->len, DMA_TO_DEVICE);
+ td_info->skb_dma[i] = 0;
+ }
+ }
+ dev_kfree_skb(td_info->skb);
+ td_info->skb = NULL;
+ }
+}
+
+/**
+ * velocity_free_td_ring - free td ring
+ * @vptr: velocity
+ *
+ * Free up the transmit ring for this particular velocity adapter.
+ * We free the ring contents but not the ring itself.
+ */
+static void velocity_free_td_ring(struct velocity_info *vptr)
+{
+ int i, j;
+
+ for (j = 0; j < vptr->tx.numq; j++) {
+ if (vptr->tx.infos[j] == NULL)
+ continue;
+ for (i = 0; i < vptr->options.numtx; i++)
+ velocity_free_td_ring_entry(vptr, j, i);
+
+ kfree(vptr->tx.infos[j]);
+ vptr->tx.infos[j] = NULL;
+ }
+}
+
+static void velocity_free_rings(struct velocity_info *vptr)
+{
+ velocity_free_td_ring(vptr);
+ velocity_free_rd_ring(vptr);
+ velocity_free_dma_rings(vptr);
+}
+
+/**
+ * velocity_error - handle error from controller
+ * @vptr: velocity
+ * @status: card status
+ *
+ * Process an error report from the hardware and attempt to recover
+ * the card itself. At the moment we cannot recover from some
+ * theoretically impossible errors but this could be fixed using
+ * the pci_device_failed logic to bounce the hardware
+ *
+ */
+static void velocity_error(struct velocity_info *vptr, int status)
+{
+
+ if (status & ISR_TXSTLI) {
+ struct mac_regs __iomem *regs = vptr->mac_regs;
+
+ netdev_err(vptr->netdev, "TD structure error TDindex=%hx\n",
+ readw(&regs->TDIdx[0]));
+ BYTE_REG_BITS_ON(TXESR_TDSTR, &regs->TXESR);
+ writew(TRDCSR_RUN, &regs->TDCSRClr);
+ netif_stop_queue(vptr->netdev);
+
+ /* FIXME: port over the pci_device_failed code and use it
+ here */
+ }
+
+ if (status & ISR_SRCI) {
+ struct mac_regs __iomem *regs = vptr->mac_regs;
+ int linked;
+
+ if (vptr->options.spd_dpx == SPD_DPX_AUTO) {
+ vptr->mii_status = check_connection_type(regs);
+
+ /*
+ * If it is a 3119, disable frame bursting in
+ * halfduplex mode and enable it in fullduplex
+ * mode
+ */
+ if (vptr->rev_id < REV_ID_VT3216_A0) {
+ if (vptr->mii_status & VELOCITY_DUPLEX_FULL)
+ BYTE_REG_BITS_ON(TCR_TB2BDIS, &regs->TCR);
+ else
+ BYTE_REG_BITS_OFF(TCR_TB2BDIS, &regs->TCR);
+ }
+ /*
+ * Only enable CD heart beat counter in 10HD mode
+ */
+ if (!(vptr->mii_status & VELOCITY_DUPLEX_FULL) && (vptr->mii_status & VELOCITY_SPEED_10))
+ BYTE_REG_BITS_OFF(TESTCFG_HBDIS, &regs->TESTCFG);
+ else
+ BYTE_REG_BITS_ON(TESTCFG_HBDIS, &regs->TESTCFG);
+
+ setup_queue_timers(vptr);
+ }
+ /*
+ * Get link status from PHYSR0
+ */
+ linked = readb(&regs->PHYSR0) & PHYSR0_LINKGD;
+
+ if (linked) {
+ vptr->mii_status &= ~VELOCITY_LINK_FAIL;
+ netif_carrier_on(vptr->netdev);
+ } else {
+ vptr->mii_status |= VELOCITY_LINK_FAIL;
+ netif_carrier_off(vptr->netdev);
+ }
+
+ velocity_print_link_status(vptr);
+ enable_flow_control_ability(vptr);
+
+ /*
+ * Re-enable auto-polling because SRCI will disable
+ * auto-polling
+ */
+
+ enable_mii_autopoll(regs);
+
+ if (vptr->mii_status & VELOCITY_LINK_FAIL)
+ netif_stop_queue(vptr->netdev);
+ else
+ netif_wake_queue(vptr->netdev);
+
+ }
+ if (status & ISR_MIBFI)
+ velocity_update_hw_mibs(vptr);
+ if (status & ISR_LSTEI)
+ mac_rx_queue_wake(vptr->mac_regs);
+}
+
+/**
+ * velocity_tx_srv - transmit interrupt service
+ * @vptr: Velocity
+ *
+ * Scan the queues looking for transmitted packets that
+ * we can complete and clean up. Update any statistics as
+ * necessary/
+ */
+static int velocity_tx_srv(struct velocity_info *vptr)
+{
+ struct tx_desc *td;
+ int qnum;
+ int full = 0;
+ int idx;
+ int works = 0;
+ struct velocity_td_info *tdinfo;
+ struct net_device_stats *stats = &vptr->netdev->stats;
+
+ for (qnum = 0; qnum < vptr->tx.numq; qnum++) {
+ for (idx = vptr->tx.tail[qnum]; vptr->tx.used[qnum] > 0;
+ idx = (idx + 1) % vptr->options.numtx) {
+
+ /*
+ * Get Tx Descriptor
+ */
+ td = &(vptr->tx.rings[qnum][idx]);
+ tdinfo = &(vptr->tx.infos[qnum][idx]);
+
+ if (td->tdesc0.len & OWNED_BY_NIC)
+ break;
+
+ if ((works++ > 15))
+ break;
+
+ if (td->tdesc0.TSR & TSR0_TERR) {
+ stats->tx_errors++;
+ stats->tx_dropped++;
+ if (td->tdesc0.TSR & TSR0_CDH)
+ stats->tx_heartbeat_errors++;
+ if (td->tdesc0.TSR & TSR0_CRS)
+ stats->tx_carrier_errors++;
+ if (td->tdesc0.TSR & TSR0_ABT)
+ stats->tx_aborted_errors++;
+ if (td->tdesc0.TSR & TSR0_OWC)
+ stats->tx_window_errors++;
+ } else {
+ stats->tx_packets++;
+ stats->tx_bytes += tdinfo->skb->len;
+ }
+ velocity_free_tx_buf(vptr, tdinfo, td);
+ vptr->tx.used[qnum]--;
+ }
+ vptr->tx.tail[qnum] = idx;
+
+ if (AVAIL_TD(vptr, qnum) < 1)
+ full = 1;
+ }
+ /*
+ * Look to see if we should kick the transmit network
+ * layer for more work.
+ */
+ if (netif_queue_stopped(vptr->netdev) && (full == 0) &&
+ (!(vptr->mii_status & VELOCITY_LINK_FAIL))) {
+ netif_wake_queue(vptr->netdev);
+ }
+ return works;
+}
+
+/**
+ * velocity_rx_csum - checksum process
+ * @rd: receive packet descriptor
+ * @skb: network layer packet buffer
+ *
+ * Process the status bits for the received packet and determine
+ * if the checksum was computed and verified by the hardware
+ */
+static inline void velocity_rx_csum(struct rx_desc *rd, struct sk_buff *skb)
+{
+ skb_checksum_none_assert(skb);
+
+ if (rd->rdesc1.CSM & CSM_IPKT) {
+ if (rd->rdesc1.CSM & CSM_IPOK) {
+ if ((rd->rdesc1.CSM & CSM_TCPKT) ||
+ (rd->rdesc1.CSM & CSM_UDPKT)) {
+ if (!(rd->rdesc1.CSM & CSM_TUPOK))
+ return;
+ }
+ skb->ip_summed = CHECKSUM_UNNECESSARY;
+ }
+ }
+}
+
+/**
+ * velocity_rx_copy - in place Rx copy for small packets
+ * @rx_skb: network layer packet buffer candidate
+ * @pkt_size: received data size
+ * @vptr: velocity adapter
+ *
+ * Replace the current skb that is scheduled for Rx processing by a
+ * shorter, immediately allocated skb, if the received packet is small
+ * enough. This function returns a negative value if the received
+ * packet is too big or if memory is exhausted.
+ */
+static int velocity_rx_copy(struct sk_buff **rx_skb, int pkt_size,
+ struct velocity_info *vptr)
+{
+ int ret = -1;
+ if (pkt_size < rx_copybreak) {
+ struct sk_buff *new_skb;
+
+ new_skb = netdev_alloc_skb_ip_align(vptr->netdev, pkt_size);
+ if (new_skb) {
+ new_skb->ip_summed = rx_skb[0]->ip_summed;
+ skb_copy_from_linear_data(*rx_skb, new_skb->data, pkt_size);
+ *rx_skb = new_skb;
+ ret = 0;
+ }
+
+ }
+ return ret;
+}
+
+/**
+ * velocity_iph_realign - IP header alignment
+ * @vptr: velocity we are handling
+ * @skb: network layer packet buffer
+ * @pkt_size: received data size
+ *
+ * Align IP header on a 2 bytes boundary. This behavior can be
+ * configured by the user.
+ */
+static inline void velocity_iph_realign(struct velocity_info *vptr,
+ struct sk_buff *skb, int pkt_size)
+{
+ if (vptr->flags & VELOCITY_FLAGS_IP_ALIGN) {
+ memmove(skb->data + 2, skb->data, pkt_size);
+ skb_reserve(skb, 2);
+ }
+}
+
+/**
+ * velocity_receive_frame - received packet processor
+ * @vptr: velocity we are handling
+ * @idx: ring index
+ *
+ * A packet has arrived. We process the packet and if appropriate
+ * pass the frame up the network stack
+ */
+static int velocity_receive_frame(struct velocity_info *vptr, int idx)
+{
+ struct net_device_stats *stats = &vptr->netdev->stats;
+ struct velocity_rd_info *rd_info = &(vptr->rx.info[idx]);
+ struct rx_desc *rd = &(vptr->rx.ring[idx]);
+ int pkt_len = le16_to_cpu(rd->rdesc0.len) & 0x3fff;
+ struct sk_buff *skb;
+
+ if (unlikely(rd->rdesc0.RSR & (RSR_STP | RSR_EDP | RSR_RL))) {
+ if (rd->rdesc0.RSR & (RSR_STP | RSR_EDP))
+ netdev_err(vptr->netdev, "received frame spans multiple RDs\n");
+ stats->rx_length_errors++;
+ return -EINVAL;
+ }
+
+ if (rd->rdesc0.RSR & RSR_MAR)
+ stats->multicast++;
+
+ skb = rd_info->skb;
+
+ dma_sync_single_for_cpu(vptr->dev, rd_info->skb_dma,
+ vptr->rx.buf_sz, DMA_FROM_DEVICE);
+
+ velocity_rx_csum(rd, skb);
+
+ if (velocity_rx_copy(&skb, pkt_len, vptr) < 0) {
+ velocity_iph_realign(vptr, skb, pkt_len);
+ rd_info->skb = NULL;
+ dma_unmap_single(vptr->dev, rd_info->skb_dma, vptr->rx.buf_sz,
+ DMA_FROM_DEVICE);
+ } else {
+ dma_sync_single_for_device(vptr->dev, rd_info->skb_dma,
+ vptr->rx.buf_sz, DMA_FROM_DEVICE);
+ }
+
+ skb_put(skb, pkt_len - 4);
+ skb->protocol = eth_type_trans(skb, vptr->netdev);
+
+ if (rd->rdesc0.RSR & RSR_DETAG) {
+ u16 vid = swab16(le16_to_cpu(rd->rdesc1.PQTAG));
+
+ __vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q), vid);
+ }
+ netif_receive_skb(skb);
+
+ stats->rx_bytes += pkt_len;
+ stats->rx_packets++;
+
+ return 0;
+}
+
+/**
+ * velocity_rx_srv - service RX interrupt
+ * @vptr: velocity
+ * @budget_left: remaining budget
+ *
+ * Walk the receive ring of the velocity adapter and remove
+ * any received packets from the receive queue. Hand the ring
+ * slots back to the adapter for reuse.
+ */
+static int velocity_rx_srv(struct velocity_info *vptr, int budget_left)
+{
+ struct net_device_stats *stats = &vptr->netdev->stats;
+ int rd_curr = vptr->rx.curr;
+ int works = 0;
+
+ while (works < budget_left) {
+ struct rx_desc *rd = vptr->rx.ring + rd_curr;
+
+ if (!vptr->rx.info[rd_curr].skb)
+ break;
+
+ if (rd->rdesc0.len & OWNED_BY_NIC)
+ break;
+
+ rmb();
+
+ /*
+ * Don't drop CE or RL error frame although RXOK is off
+ */
+ if (rd->rdesc0.RSR & (RSR_RXOK | RSR_CE | RSR_RL)) {
+ if (velocity_receive_frame(vptr, rd_curr) < 0)
+ stats->rx_dropped++;
+ } else {
+ if (rd->rdesc0.RSR & RSR_CRC)
+ stats->rx_crc_errors++;
+ if (rd->rdesc0.RSR & RSR_FAE)
+ stats->rx_frame_errors++;
+
+ stats->rx_dropped++;
+ }
+
+ rd->size |= RX_INTEN;
+
+ rd_curr++;
+ if (rd_curr >= vptr->options.numrx)
+ rd_curr = 0;
+ works++;
+ }
+
+ vptr->rx.curr = rd_curr;
+
+ if ((works > 0) && (velocity_rx_refill(vptr) > 0))
+ velocity_give_many_rx_descs(vptr);
+
+ VAR_USED(stats);
+ return works;
+}
+
+static int velocity_poll(struct napi_struct *napi, int budget)
+{
+ struct velocity_info *vptr = container_of(napi,
+ struct velocity_info, napi);
+ unsigned int rx_done;
+ unsigned long flags;
+
+ /*
+ * Do rx and tx twice for performance (taken from the VIA
+ * out-of-tree driver).
+ */
+ rx_done = velocity_rx_srv(vptr, budget);
+ spin_lock_irqsave(&vptr->lock, flags);
+ velocity_tx_srv(vptr);
+ /* If budget not fully consumed, exit the polling mode */
+ if (rx_done < budget) {
+ napi_complete_done(napi, rx_done);
+ mac_enable_int(vptr->mac_regs);
+ }
+ spin_unlock_irqrestore(&vptr->lock, flags);
+
+ return rx_done;
+}
+
+/**
+ * velocity_intr - interrupt callback
+ * @irq: interrupt number
+ * @dev_instance: interrupting device
+ *
+ * Called whenever an interrupt is generated by the velocity
+ * adapter IRQ line. We may not be the source of the interrupt
+ * and need to identify initially if we are, and if not exit as
+ * efficiently as possible.
+ */
+static irqreturn_t velocity_intr(int irq, void *dev_instance)
+{
+ struct net_device *dev = dev_instance;
+ struct velocity_info *vptr = netdev_priv(dev);
+ u32 isr_status;
+
+ spin_lock(&vptr->lock);
+ isr_status = mac_read_isr(vptr->mac_regs);
+
+ /* Not us ? */
+ if (isr_status == 0) {
+ spin_unlock(&vptr->lock);
+ return IRQ_NONE;
+ }
+
+ /* Ack the interrupt */
+ mac_write_isr(vptr->mac_regs, isr_status);
+
+ if (likely(napi_schedule_prep(&vptr->napi))) {
+ mac_disable_int(vptr->mac_regs);
+ __napi_schedule(&vptr->napi);
+ }
+
+ if (isr_status & (~(ISR_PRXI | ISR_PPRXI | ISR_PTXI | ISR_PPTXI)))
+ velocity_error(vptr, isr_status);
+
+ spin_unlock(&vptr->lock);
+
+ return IRQ_HANDLED;
+}
+
+/**
+ * velocity_open - interface activation callback
+ * @dev: network layer device to open
+ *
+ * Called when the network layer brings the interface up. Returns
+ * a negative posix error code on failure, or zero on success.
+ *
+ * All the ring allocation and set up is done on open for this
+ * adapter to minimise memory usage when inactive
+ */
+static int velocity_open(struct net_device *dev)
+{
+ struct velocity_info *vptr = netdev_priv(dev);
+ int ret;
+
+ ret = velocity_init_rings(vptr, dev->mtu);
+ if (ret < 0)
+ goto out;
+
+ /* Ensure chip is running */
+ velocity_set_power_state(vptr, PCI_D0);
+
+ velocity_init_registers(vptr, VELOCITY_INIT_COLD);
+
+ ret = request_irq(dev->irq, velocity_intr, IRQF_SHARED,
+ dev->name, dev);
+ if (ret < 0) {
+ /* Power down the chip */
+ velocity_set_power_state(vptr, PCI_D3hot);
+ velocity_free_rings(vptr);
+ goto out;
+ }
+
+ velocity_give_many_rx_descs(vptr);
+
+ mac_enable_int(vptr->mac_regs);
+ netif_start_queue(dev);
+ napi_enable(&vptr->napi);
+ vptr->flags |= VELOCITY_FLAGS_OPENED;
+out:
+ return ret;
+}
+
+/**
+ * velocity_shutdown - shut down the chip
+ * @vptr: velocity to deactivate
+ *
+ * Shuts down the internal operations of the velocity and
+ * disables interrupts, autopolling, transmit and receive
+ */
+static void velocity_shutdown(struct velocity_info *vptr)
+{
+ struct mac_regs __iomem *regs = vptr->mac_regs;
+ mac_disable_int(regs);
+ writel(CR0_STOP, &regs->CR0Set);
+ writew(0xFFFF, &regs->TDCSRClr);
+ writeb(0xFF, &regs->RDCSRClr);
+ safe_disable_mii_autopoll(regs);
+ mac_clear_isr(regs);
+}
+
+/**
+ * velocity_change_mtu - MTU change callback
+ * @dev: network device
+ * @new_mtu: desired MTU
+ *
+ * Handle requests from the networking layer for MTU change on
+ * this interface. It gets called on a change by the network layer.
+ * Return zero for success or negative posix error code.
+ */
+static int velocity_change_mtu(struct net_device *dev, int new_mtu)
+{
+ struct velocity_info *vptr = netdev_priv(dev);
+ int ret = 0;
+
+ if (!netif_running(dev)) {
+ dev->mtu = new_mtu;
+ goto out_0;
+ }
+
+ if (dev->mtu != new_mtu) {
+ struct velocity_info *tmp_vptr;
+ unsigned long flags;
+ struct rx_info rx;
+ struct tx_info tx;
+
+ tmp_vptr = kzalloc(sizeof(*tmp_vptr), GFP_KERNEL);
+ if (!tmp_vptr) {
+ ret = -ENOMEM;
+ goto out_0;
+ }
+
+ tmp_vptr->netdev = dev;
+ tmp_vptr->pdev = vptr->pdev;
+ tmp_vptr->dev = vptr->dev;
+ tmp_vptr->options = vptr->options;
+ tmp_vptr->tx.numq = vptr->tx.numq;
+
+ ret = velocity_init_rings(tmp_vptr, new_mtu);
+ if (ret < 0)
+ goto out_free_tmp_vptr_1;
+
+ napi_disable(&vptr->napi);
+
+ spin_lock_irqsave(&vptr->lock, flags);
+
+ netif_stop_queue(dev);
+ velocity_shutdown(vptr);
+
+ rx = vptr->rx;
+ tx = vptr->tx;
+
+ vptr->rx = tmp_vptr->rx;
+ vptr->tx = tmp_vptr->tx;
+
+ tmp_vptr->rx = rx;
+ tmp_vptr->tx = tx;
+
+ dev->mtu = new_mtu;
+
+ velocity_init_registers(vptr, VELOCITY_INIT_COLD);
+
+ velocity_give_many_rx_descs(vptr);
+
+ napi_enable(&vptr->napi);
+
+ mac_enable_int(vptr->mac_regs);
+ netif_start_queue(dev);
+
+ spin_unlock_irqrestore(&vptr->lock, flags);
+
+ velocity_free_rings(tmp_vptr);
+
+out_free_tmp_vptr_1:
+ kfree(tmp_vptr);
+ }
+out_0:
+ return ret;
+}
+
+#ifdef CONFIG_NET_POLL_CONTROLLER
+/**
+ * velocity_poll_controller - Velocity Poll controller function
+ * @dev: network device
+ *
+ *
+ * Used by NETCONSOLE and other diagnostic tools to allow network I/P
+ * with interrupts disabled.
+ */
+static void velocity_poll_controller(struct net_device *dev)
+{
+ disable_irq(dev->irq);
+ velocity_intr(dev->irq, dev);
+ enable_irq(dev->irq);
+}
+#endif
+
+/**
+ * velocity_mii_ioctl - MII ioctl handler
+ * @dev: network device
+ * @ifr: the ifreq block for the ioctl
+ * @cmd: the command
+ *
+ * Process MII requests made via ioctl from the network layer. These
+ * are used by tools like kudzu to interrogate the link state of the
+ * hardware
+ */
+static int velocity_mii_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
+{
+ struct velocity_info *vptr = netdev_priv(dev);
+ struct mac_regs __iomem *regs = vptr->mac_regs;
+ unsigned long flags;
+ struct mii_ioctl_data *miidata = if_mii(ifr);
+ int err;
+
+ switch (cmd) {
+ case SIOCGMIIPHY:
+ miidata->phy_id = readb(&regs->MIIADR) & 0x1f;
+ break;
+ case SIOCGMIIREG:
+ if (velocity_mii_read(vptr->mac_regs, miidata->reg_num & 0x1f, &(miidata->val_out)) < 0)
+ return -ETIMEDOUT;
+ break;
+ case SIOCSMIIREG:
+ spin_lock_irqsave(&vptr->lock, flags);
+ err = velocity_mii_write(vptr->mac_regs, miidata->reg_num & 0x1f, miidata->val_in);
+ spin_unlock_irqrestore(&vptr->lock, flags);
+ check_connection_type(vptr->mac_regs);
+ if (err)
+ return err;
+ break;
+ default:
+ return -EOPNOTSUPP;
+ }
+ return 0;
+}
+
+/**
+ * velocity_ioctl - ioctl entry point
+ * @dev: network device
+ * @rq: interface request ioctl
+ * @cmd: command code
+ *
+ * Called when the user issues an ioctl request to the network
+ * device in question. The velocity interface supports MII.
+ */
+static int velocity_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
+{
+ struct velocity_info *vptr = netdev_priv(dev);
+ int ret;
+
+ /* If we are asked for information and the device is power
+ saving then we need to bring the device back up to talk to it */
+
+ if (!netif_running(dev))
+ velocity_set_power_state(vptr, PCI_D0);
+
+ switch (cmd) {
+ case SIOCGMIIPHY: /* Get address of MII PHY in use. */
+ case SIOCGMIIREG: /* Read MII PHY register. */
+ case SIOCSMIIREG: /* Write to MII PHY register. */
+ ret = velocity_mii_ioctl(dev, rq, cmd);
+ break;
+
+ default:
+ ret = -EOPNOTSUPP;
+ }
+ if (!netif_running(dev))
+ velocity_set_power_state(vptr, PCI_D3hot);
+
+
+ return ret;
+}
+
+/**
+ * velocity_get_stats - statistics callback
+ * @dev: network device
+ *
+ * Callback from the network layer to allow driver statistics
+ * to be resynchronized with hardware collected state. In the
+ * case of the velocity we need to pull the MIB counters from
+ * the hardware into the counters before letting the network
+ * layer display them.
+ */
+static struct net_device_stats *velocity_get_stats(struct net_device *dev)
+{
+ struct velocity_info *vptr = netdev_priv(dev);
+
+ /* If the hardware is down, don't touch MII */
+ if (!netif_running(dev))
+ return &dev->stats;
+
+ spin_lock_irq(&vptr->lock);
+ velocity_update_hw_mibs(vptr);
+ spin_unlock_irq(&vptr->lock);
+
+ dev->stats.rx_packets = vptr->mib_counter[HW_MIB_ifRxAllPkts];
+ dev->stats.rx_errors = vptr->mib_counter[HW_MIB_ifRxErrorPkts];
+ dev->stats.rx_length_errors = vptr->mib_counter[HW_MIB_ifInRangeLengthErrors];
+
+// unsigned long rx_dropped; /* no space in linux buffers */
+ dev->stats.collisions = vptr->mib_counter[HW_MIB_ifTxEtherCollisions];
+ /* detailed rx_errors: */
+// unsigned long rx_length_errors;
+// unsigned long rx_over_errors; /* receiver ring buff overflow */
+ dev->stats.rx_crc_errors = vptr->mib_counter[HW_MIB_ifRxPktCRCE];
+// unsigned long rx_frame_errors; /* recv'd frame alignment error */
+// unsigned long rx_fifo_errors; /* recv'r fifo overrun */
+// unsigned long rx_missed_errors; /* receiver missed packet */
+
+ /* detailed tx_errors */
+// unsigned long tx_fifo_errors;
+
+ return &dev->stats;
+}
+
+/**
+ * velocity_close - close adapter callback
+ * @dev: network device
+ *
+ * Callback from the network layer when the velocity is being
+ * deactivated by the network layer
+ */
+static int velocity_close(struct net_device *dev)
+{
+ struct velocity_info *vptr = netdev_priv(dev);
+
+ napi_disable(&vptr->napi);
+ netif_stop_queue(dev);
+ velocity_shutdown(vptr);
+
+ if (vptr->flags & VELOCITY_FLAGS_WOL_ENABLED)
+ velocity_get_ip(vptr);
+
+ free_irq(dev->irq, dev);
+
+ velocity_free_rings(vptr);
+
+ vptr->flags &= (~VELOCITY_FLAGS_OPENED);
+ return 0;
+}
+
+/**
+ * velocity_xmit - transmit packet callback
+ * @skb: buffer to transmit
+ * @dev: network device
+ *
+ * Called by the network layer to request a packet is queued to
+ * the velocity. Returns zero on success.
+ */
+static netdev_tx_t velocity_xmit(struct sk_buff *skb,
+ struct net_device *dev)
+{
+ struct velocity_info *vptr = netdev_priv(dev);
+ int qnum = 0;
+ struct tx_desc *td_ptr;
+ struct velocity_td_info *tdinfo;
+ unsigned long flags;
+ int pktlen;
+ int index, prev;
+ int i = 0;
+
+ if (skb_padto(skb, ETH_ZLEN))
+ goto out;
+
+ /* The hardware can handle at most 7 memory segments, so merge
+ * the skb if there are more */
+ if (skb_shinfo(skb)->nr_frags > 6 && __skb_linearize(skb)) {
+ dev_kfree_skb_any(skb);
+ return NETDEV_TX_OK;
+ }
+
+ pktlen = skb_shinfo(skb)->nr_frags == 0 ?
+ max_t(unsigned int, skb->len, ETH_ZLEN) :
+ skb_headlen(skb);
+
+ spin_lock_irqsave(&vptr->lock, flags);
+
+ index = vptr->tx.curr[qnum];
+ td_ptr = &(vptr->tx.rings[qnum][index]);
+ tdinfo = &(vptr->tx.infos[qnum][index]);
+
+ td_ptr->tdesc1.TCR = TCR0_TIC;
+ td_ptr->td_buf[0].size &= ~TD_QUEUE;
+
+ /*
+ * Map the linear network buffer into PCI space and
+ * add it to the transmit ring.
+ */
+ tdinfo->skb = skb;
+ tdinfo->skb_dma[0] = dma_map_single(vptr->dev, skb->data, pktlen,
+ DMA_TO_DEVICE);
+ td_ptr->tdesc0.len = cpu_to_le16(pktlen);
+ td_ptr->td_buf[0].pa_low = cpu_to_le32(tdinfo->skb_dma[0]);
+ td_ptr->td_buf[0].pa_high = 0;
+ td_ptr->td_buf[0].size = cpu_to_le16(pktlen);
+
+ /* Handle fragments */
+ for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) {
+ const skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
+
+ tdinfo->skb_dma[i + 1] = skb_frag_dma_map(vptr->dev,
+ frag, 0,
+ skb_frag_size(frag),
+ DMA_TO_DEVICE);
+
+ td_ptr->td_buf[i + 1].pa_low = cpu_to_le32(tdinfo->skb_dma[i + 1]);
+ td_ptr->td_buf[i + 1].pa_high = 0;
+ td_ptr->td_buf[i + 1].size = cpu_to_le16(skb_frag_size(frag));
+ }
+ tdinfo->nskb_dma = i + 1;
+
+ td_ptr->tdesc1.cmd = TCPLS_NORMAL + (tdinfo->nskb_dma + 1) * 16;
+
+ if (skb_vlan_tag_present(skb)) {
+ td_ptr->tdesc1.vlan = cpu_to_le16(skb_vlan_tag_get(skb));
+ td_ptr->tdesc1.TCR |= TCR0_VETAG;
+ }
+
+ /*
+ * Handle hardware checksum
+ */
+ if (skb->ip_summed == CHECKSUM_PARTIAL) {
+ const struct iphdr *ip = ip_hdr(skb);
+ if (ip->protocol == IPPROTO_TCP)
+ td_ptr->tdesc1.TCR |= TCR0_TCPCK;
+ else if (ip->protocol == IPPROTO_UDP)
+ td_ptr->tdesc1.TCR |= (TCR0_UDPCK);
+ td_ptr->tdesc1.TCR |= TCR0_IPCK;
+ }
+
+ prev = index - 1;
+ if (prev < 0)
+ prev = vptr->options.numtx - 1;
+ td_ptr->tdesc0.len |= OWNED_BY_NIC;
+ vptr->tx.used[qnum]++;
+ vptr->tx.curr[qnum] = (index + 1) % vptr->options.numtx;
+
+ if (AVAIL_TD(vptr, qnum) < 1)
+ netif_stop_queue(dev);
+
+ td_ptr = &(vptr->tx.rings[qnum][prev]);
+ td_ptr->td_buf[0].size |= TD_QUEUE;
+ mac_tx_queue_wake(vptr->mac_regs, qnum);
+
+ spin_unlock_irqrestore(&vptr->lock, flags);
+out:
+ return NETDEV_TX_OK;
+}
+
+static const struct net_device_ops velocity_netdev_ops = {
+ .ndo_open = velocity_open,
+ .ndo_stop = velocity_close,
+ .ndo_start_xmit = velocity_xmit,
+ .ndo_get_stats = velocity_get_stats,
+ .ndo_validate_addr = eth_validate_addr,
+ .ndo_set_mac_address = eth_mac_addr,
+ .ndo_set_rx_mode = velocity_set_multi,
+ .ndo_change_mtu = velocity_change_mtu,
+ .ndo_eth_ioctl = velocity_ioctl,
+ .ndo_vlan_rx_add_vid = velocity_vlan_rx_add_vid,
+ .ndo_vlan_rx_kill_vid = velocity_vlan_rx_kill_vid,
+#ifdef CONFIG_NET_POLL_CONTROLLER
+ .ndo_poll_controller = velocity_poll_controller,
+#endif
+};
+
+/**
+ * velocity_init_info - init private data
+ * @vptr: Velocity info
+ * @info: Board type
+ *
+ * Set up the initial velocity_info struct for the device that has been
+ * discovered.
+ */
+static void velocity_init_info(struct velocity_info *vptr,
+ const struct velocity_info_tbl *info)
+{
+ vptr->chip_id = info->chip_id;
+ vptr->tx.numq = info->txqueue;
+ vptr->multicast_limit = MCAM_SIZE;
+ spin_lock_init(&vptr->lock);
+}
+
+/**
+ * velocity_get_pci_info - retrieve PCI info for device
+ * @vptr: velocity device
+ *
+ * Retrieve the PCI configuration space data that interests us from
+ * the kernel PCI layer
+ */
+static int velocity_get_pci_info(struct velocity_info *vptr)
+{
+ struct pci_dev *pdev = vptr->pdev;
+
+ pci_set_master(pdev);
+
+ vptr->ioaddr = pci_resource_start(pdev, 0);
+ vptr->memaddr = pci_resource_start(pdev, 1);
+
+ if (!(pci_resource_flags(pdev, 0) & IORESOURCE_IO)) {
+ dev_err(&pdev->dev,
+ "region #0 is not an I/O resource, aborting.\n");
+ return -EINVAL;
+ }
+
+ if ((pci_resource_flags(pdev, 1) & IORESOURCE_IO)) {
+ dev_err(&pdev->dev,
+ "region #1 is an I/O resource, aborting.\n");
+ return -EINVAL;
+ }
+
+ if (pci_resource_len(pdev, 1) < VELOCITY_IO_SIZE) {
+ dev_err(&pdev->dev, "region #1 is too small.\n");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+/**
+ * velocity_get_platform_info - retrieve platform info for device
+ * @vptr: velocity device
+ *
+ * Retrieve the Platform configuration data that interests us
+ */
+static int velocity_get_platform_info(struct velocity_info *vptr)
+{
+ struct resource res;
+ int ret;
+
+ vptr->no_eeprom = of_property_read_bool(vptr->dev->of_node, "no-eeprom");
+
+ ret = of_address_to_resource(vptr->dev->of_node, 0, &res);
+ if (ret) {
+ dev_err(vptr->dev, "unable to find memory address\n");
+ return ret;
+ }
+
+ vptr->memaddr = res.start;
+
+ if (resource_size(&res) < VELOCITY_IO_SIZE) {
+ dev_err(vptr->dev, "memory region is too small.\n");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+/**
+ * velocity_print_info - per driver data
+ * @vptr: velocity
+ *
+ * Print per driver data as the kernel driver finds Velocity
+ * hardware
+ */
+static void velocity_print_info(struct velocity_info *vptr)
+{
+ netdev_info(vptr->netdev, "%s - Ethernet Address: %pM\n",
+ get_chip_name(vptr->chip_id), vptr->netdev->dev_addr);
+}
+
+static u32 velocity_get_link(struct net_device *dev)
+{
+ struct velocity_info *vptr = netdev_priv(dev);
+ struct mac_regs __iomem *regs = vptr->mac_regs;
+ return BYTE_REG_BITS_IS_ON(PHYSR0_LINKGD, &regs->PHYSR0) ? 1 : 0;
+}
+
+/**
+ * velocity_probe - set up discovered velocity device
+ * @dev: PCI device
+ * @info: table of match
+ * @irq: interrupt info
+ * @bustype: bus that device is connected to
+ *
+ * Configure a discovered adapter from scratch. Return a negative
+ * errno error code on failure paths.
+ */
+static int velocity_probe(struct device *dev, int irq,
+ const struct velocity_info_tbl *info,
+ enum velocity_bus_type bustype)
+{
+ struct net_device *netdev;
+ int i;
+ struct velocity_info *vptr;
+ struct mac_regs __iomem *regs;
+ int ret = -ENOMEM;
+ u8 addr[ETH_ALEN];
+
+ /* FIXME: this driver, like almost all other ethernet drivers,
+ * can support more than MAX_UNITS.
+ */
+ if (velocity_nics >= MAX_UNITS) {
+ dev_notice(dev, "already found %d NICs.\n", velocity_nics);
+ return -ENODEV;
+ }
+
+ netdev = alloc_etherdev(sizeof(struct velocity_info));
+ if (!netdev)
+ goto out;
+
+ /* Chain it all together */
+
+ SET_NETDEV_DEV(netdev, dev);
+ vptr = netdev_priv(netdev);
+
+ pr_info_once("%s Ver. %s\n", VELOCITY_FULL_DRV_NAM, VELOCITY_VERSION);
+ pr_info_once("Copyright (c) 2002, 2003 VIA Networking Technologies, Inc.\n");
+ pr_info_once("Copyright (c) 2004 Red Hat Inc.\n");
+
+ netdev->irq = irq;
+ vptr->netdev = netdev;
+ vptr->dev = dev;
+
+ velocity_init_info(vptr, info);
+
+ if (bustype == BUS_PCI) {
+ vptr->pdev = to_pci_dev(dev);
+
+ ret = velocity_get_pci_info(vptr);
+ if (ret < 0)
+ goto err_free_dev;
+ } else {
+ vptr->pdev = NULL;
+ ret = velocity_get_platform_info(vptr);
+ if (ret < 0)
+ goto err_free_dev;
+ }
+
+ regs = ioremap(vptr->memaddr, VELOCITY_IO_SIZE);
+ if (regs == NULL) {
+ ret = -EIO;
+ goto err_free_dev;
+ }
+
+ vptr->mac_regs = regs;
+ vptr->rev_id = readb(&regs->rev_id);
+
+ mac_wol_reset(regs);
+
+ for (i = 0; i < 6; i++)
+ addr[i] = readb(&regs->PAR[i]);
+ eth_hw_addr_set(netdev, addr);
+
+
+ velocity_get_options(&vptr->options, velocity_nics);
+
+ /*
+ * Mask out the options cannot be set to the chip
+ */
+
+ vptr->options.flags &= info->flags;
+
+ /*
+ * Enable the chip specified capbilities
+ */
+
+ vptr->flags = vptr->options.flags | (info->flags & 0xFF000000UL);
+
+ vptr->wol_opts = vptr->options.wol_opts;
+ vptr->flags |= VELOCITY_FLAGS_WOL_ENABLED;
+
+ vptr->phy_id = MII_GET_PHY_ID(vptr->mac_regs);
+
+ netdev->netdev_ops = &velocity_netdev_ops;
+ netdev->ethtool_ops = &velocity_ethtool_ops;
+ netif_napi_add(netdev, &vptr->napi, velocity_poll);
+
+ netdev->hw_features = NETIF_F_IP_CSUM | NETIF_F_SG |
+ NETIF_F_HW_VLAN_CTAG_TX;
+ netdev->features |= NETIF_F_HW_VLAN_CTAG_TX |
+ NETIF_F_HW_VLAN_CTAG_FILTER | NETIF_F_HW_VLAN_CTAG_RX |
+ NETIF_F_IP_CSUM;
+
+ /* MTU range: 64 - 9000 */
+ netdev->min_mtu = VELOCITY_MIN_MTU;
+ netdev->max_mtu = VELOCITY_MAX_MTU;
+
+ ret = register_netdev(netdev);
+ if (ret < 0)
+ goto err_iounmap;
+
+ if (!velocity_get_link(netdev)) {
+ netif_carrier_off(netdev);
+ vptr->mii_status |= VELOCITY_LINK_FAIL;
+ }
+
+ velocity_print_info(vptr);
+ dev_set_drvdata(vptr->dev, netdev);
+
+ /* and leave the chip powered down */
+
+ velocity_set_power_state(vptr, PCI_D3hot);
+ velocity_nics++;
+out:
+ return ret;
+
+err_iounmap:
+ netif_napi_del(&vptr->napi);
+ iounmap(regs);
+err_free_dev:
+ free_netdev(netdev);
+ goto out;
+}
+
+/**
+ * velocity_remove - device unplug
+ * @dev: device being removed
+ *
+ * Device unload callback. Called on an unplug or on module
+ * unload for each active device that is present. Disconnects
+ * the device from the network layer and frees all the resources
+ */
+static int velocity_remove(struct device *dev)
+{
+ struct net_device *netdev = dev_get_drvdata(dev);
+ struct velocity_info *vptr = netdev_priv(netdev);
+
+ unregister_netdev(netdev);
+ netif_napi_del(&vptr->napi);
+ iounmap(vptr->mac_regs);
+ free_netdev(netdev);
+ velocity_nics--;
+
+ return 0;
+}
+
+static int velocity_pci_probe(struct pci_dev *pdev,
+ const struct pci_device_id *ent)
+{
+ const struct velocity_info_tbl *info =
+ &chip_info_table[ent->driver_data];
+ int ret;
+
+ ret = pci_enable_device(pdev);
+ if (ret < 0)
+ return ret;
+
+ ret = pci_request_regions(pdev, VELOCITY_NAME);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "No PCI resources.\n");
+ goto fail1;
+ }
+
+ ret = velocity_probe(&pdev->dev, pdev->irq, info, BUS_PCI);
+ if (ret == 0)
+ return 0;
+
+ pci_release_regions(pdev);
+fail1:
+ pci_disable_device(pdev);
+ return ret;
+}
+
+static void velocity_pci_remove(struct pci_dev *pdev)
+{
+ velocity_remove(&pdev->dev);
+
+ pci_release_regions(pdev);
+ pci_disable_device(pdev);
+}
+
+static int velocity_platform_probe(struct platform_device *pdev)
+{
+ const struct velocity_info_tbl *info;
+ int irq;
+
+ info = of_device_get_match_data(&pdev->dev);
+ if (!info)
+ return -EINVAL;
+
+ irq = irq_of_parse_and_map(pdev->dev.of_node, 0);
+ if (!irq)
+ return -EINVAL;
+
+ return velocity_probe(&pdev->dev, irq, info, BUS_PLATFORM);
+}
+
+static int velocity_platform_remove(struct platform_device *pdev)
+{
+ velocity_remove(&pdev->dev);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+/**
+ * wol_calc_crc - WOL CRC
+ * @size: size of the wake mask
+ * @pattern: data pattern
+ * @mask_pattern: mask
+ *
+ * Compute the wake on lan crc hashes for the packet header
+ * we are interested in.
+ */
+static u16 wol_calc_crc(int size, u8 *pattern, u8 *mask_pattern)
+{
+ u16 crc = 0xFFFF;
+ u8 mask;
+ int i, j;
+
+ for (i = 0; i < size; i++) {
+ mask = mask_pattern[i];
+
+ /* Skip this loop if the mask equals to zero */
+ if (mask == 0x00)
+ continue;
+
+ for (j = 0; j < 8; j++) {
+ if ((mask & 0x01) == 0) {
+ mask >>= 1;
+ continue;
+ }
+ mask >>= 1;
+ crc = crc_ccitt(crc, &(pattern[i * 8 + j]), 1);
+ }
+ }
+ /* Finally, invert the result once to get the correct data */
+ crc = ~crc;
+ return bitrev32(crc) >> 16;
+}
+
+/**
+ * velocity_set_wol - set up for wake on lan
+ * @vptr: velocity to set WOL status on
+ *
+ * Set a card up for wake on lan either by unicast or by
+ * ARP packet.
+ *
+ * FIXME: check static buffer is safe here
+ */
+static int velocity_set_wol(struct velocity_info *vptr)
+{
+ struct mac_regs __iomem *regs = vptr->mac_regs;
+ enum speed_opt spd_dpx = vptr->options.spd_dpx;
+ static u8 buf[256];
+ int i;
+
+ static u32 mask_pattern[2][4] = {
+ {0x00203000, 0x000003C0, 0x00000000, 0x0000000}, /* ARP */
+ {0xfffff000, 0xffffffff, 0xffffffff, 0x000ffff} /* Magic Packet */
+ };
+
+ writew(0xFFFF, &regs->WOLCRClr);
+ writeb(WOLCFG_SAB | WOLCFG_SAM, &regs->WOLCFGSet);
+ writew(WOLCR_MAGIC_EN, &regs->WOLCRSet);
+
+ /*
+ if (vptr->wol_opts & VELOCITY_WOL_PHY)
+ writew((WOLCR_LINKON_EN|WOLCR_LINKOFF_EN), &regs->WOLCRSet);
+ */
+
+ if (vptr->wol_opts & VELOCITY_WOL_UCAST)
+ writew(WOLCR_UNICAST_EN, &regs->WOLCRSet);
+
+ if (vptr->wol_opts & VELOCITY_WOL_ARP) {
+ struct arp_packet *arp = (struct arp_packet *) buf;
+ u16 crc;
+ memset(buf, 0, sizeof(struct arp_packet) + 7);
+
+ for (i = 0; i < 4; i++)
+ writel(mask_pattern[0][i], &regs->ByteMask[0][i]);
+
+ arp->type = htons(ETH_P_ARP);
+ arp->ar_op = htons(1);
+
+ memcpy(arp->ar_tip, vptr->ip_addr, 4);
+
+ crc = wol_calc_crc((sizeof(struct arp_packet) + 7) / 8, buf,
+ (u8 *) & mask_pattern[0][0]);
+
+ writew(crc, &regs->PatternCRC[0]);
+ writew(WOLCR_ARP_EN, &regs->WOLCRSet);
+ }
+
+ BYTE_REG_BITS_ON(PWCFG_WOLTYPE, &regs->PWCFGSet);
+ BYTE_REG_BITS_ON(PWCFG_LEGACY_WOLEN, &regs->PWCFGSet);
+
+ writew(0x0FFF, &regs->WOLSRClr);
+
+ if (spd_dpx == SPD_DPX_1000_FULL)
+ goto mac_done;
+
+ if (spd_dpx != SPD_DPX_AUTO)
+ goto advertise_done;
+
+ if (vptr->mii_status & VELOCITY_AUTONEG_ENABLE) {
+ if (PHYID_GET_PHY_ID(vptr->phy_id) == PHYID_CICADA_CS8201)
+ MII_REG_BITS_ON(AUXCR_MDPPS, MII_NCONFIG, vptr->mac_regs);
+
+ MII_REG_BITS_OFF(ADVERTISE_1000FULL | ADVERTISE_1000HALF, MII_CTRL1000, vptr->mac_regs);
+ }
+
+ if (vptr->mii_status & VELOCITY_SPEED_1000)
+ MII_REG_BITS_ON(BMCR_ANRESTART, MII_BMCR, vptr->mac_regs);
+
+advertise_done:
+ BYTE_REG_BITS_ON(CHIPGCR_FCMODE, &regs->CHIPGCR);
+
+ {
+ u8 GCR;
+ GCR = readb(&regs->CHIPGCR);
+ GCR = (GCR & ~CHIPGCR_FCGMII) | CHIPGCR_FCFDX;
+ writeb(GCR, &regs->CHIPGCR);
+ }
+
+mac_done:
+ BYTE_REG_BITS_OFF(ISR_PWEI, &regs->ISR);
+ /* Turn on SWPTAG just before entering power mode */
+ BYTE_REG_BITS_ON(STICKHW_SWPTAG, &regs->STICKHW);
+ /* Go to bed ..... */
+ BYTE_REG_BITS_ON((STICKHW_DS1 | STICKHW_DS0), &regs->STICKHW);
+
+ return 0;
+}
+
+/**
+ * velocity_save_context - save registers
+ * @vptr: velocity
+ * @context: buffer for stored context
+ *
+ * Retrieve the current configuration from the velocity hardware
+ * and stash it in the context structure, for use by the context
+ * restore functions. This allows us to save things we need across
+ * power down states
+ */
+static void velocity_save_context(struct velocity_info *vptr, struct velocity_context *context)
+{
+ struct mac_regs __iomem *regs = vptr->mac_regs;
+ u16 i;
+ u8 __iomem *ptr = (u8 __iomem *)regs;
+
+ for (i = MAC_REG_PAR; i < MAC_REG_CR0_CLR; i += 4)
+ *((u32 *) (context->mac_reg + i)) = readl(ptr + i);
+
+ for (i = MAC_REG_MAR; i < MAC_REG_TDCSR_CLR; i += 4)
+ *((u32 *) (context->mac_reg + i)) = readl(ptr + i);
+
+ for (i = MAC_REG_RDBASE_LO; i < MAC_REG_FIFO_TEST0; i += 4)
+ *((u32 *) (context->mac_reg + i)) = readl(ptr + i);
+
+}
+
+static int velocity_suspend(struct device *dev)
+{
+ struct net_device *netdev = dev_get_drvdata(dev);
+ struct velocity_info *vptr = netdev_priv(netdev);
+ unsigned long flags;
+
+ if (!netif_running(vptr->netdev))
+ return 0;
+
+ netif_device_detach(vptr->netdev);
+
+ spin_lock_irqsave(&vptr->lock, flags);
+ if (vptr->pdev)
+ pci_save_state(vptr->pdev);
+
+ if (vptr->flags & VELOCITY_FLAGS_WOL_ENABLED) {
+ velocity_get_ip(vptr);
+ velocity_save_context(vptr, &vptr->context);
+ velocity_shutdown(vptr);
+ velocity_set_wol(vptr);
+ if (vptr->pdev)
+ pci_enable_wake(vptr->pdev, PCI_D3hot, 1);
+ velocity_set_power_state(vptr, PCI_D3hot);
+ } else {
+ velocity_save_context(vptr, &vptr->context);
+ velocity_shutdown(vptr);
+ if (vptr->pdev)
+ pci_disable_device(vptr->pdev);
+ velocity_set_power_state(vptr, PCI_D3hot);
+ }
+
+ spin_unlock_irqrestore(&vptr->lock, flags);
+ return 0;
+}
+
+/**
+ * velocity_restore_context - restore registers
+ * @vptr: velocity
+ * @context: buffer for stored context
+ *
+ * Reload the register configuration from the velocity context
+ * created by velocity_save_context.
+ */
+static void velocity_restore_context(struct velocity_info *vptr, struct velocity_context *context)
+{
+ struct mac_regs __iomem *regs = vptr->mac_regs;
+ int i;
+ u8 __iomem *ptr = (u8 __iomem *)regs;
+
+ for (i = MAC_REG_PAR; i < MAC_REG_CR0_SET; i += 4)
+ writel(*((u32 *) (context->mac_reg + i)), ptr + i);
+
+ /* Just skip cr0 */
+ for (i = MAC_REG_CR1_SET; i < MAC_REG_CR0_CLR; i++) {
+ /* Clear */
+ writeb(~(*((u8 *) (context->mac_reg + i))), ptr + i + 4);
+ /* Set */
+ writeb(*((u8 *) (context->mac_reg + i)), ptr + i);
+ }
+
+ for (i = MAC_REG_MAR; i < MAC_REG_IMR; i += 4)
+ writel(*((u32 *) (context->mac_reg + i)), ptr + i);
+
+ for (i = MAC_REG_RDBASE_LO; i < MAC_REG_FIFO_TEST0; i += 4)
+ writel(*((u32 *) (context->mac_reg + i)), ptr + i);
+
+ for (i = MAC_REG_TDCSR_SET; i <= MAC_REG_RDCSR_SET; i++)
+ writeb(*((u8 *) (context->mac_reg + i)), ptr + i);
+}
+
+static int velocity_resume(struct device *dev)
+{
+ struct net_device *netdev = dev_get_drvdata(dev);
+ struct velocity_info *vptr = netdev_priv(netdev);
+ unsigned long flags;
+ int i;
+
+ if (!netif_running(vptr->netdev))
+ return 0;
+
+ velocity_set_power_state(vptr, PCI_D0);
+
+ if (vptr->pdev) {
+ pci_enable_wake(vptr->pdev, PCI_D0, 0);
+ pci_restore_state(vptr->pdev);
+ }
+
+ mac_wol_reset(vptr->mac_regs);
+
+ spin_lock_irqsave(&vptr->lock, flags);
+ velocity_restore_context(vptr, &vptr->context);
+ velocity_init_registers(vptr, VELOCITY_INIT_WOL);
+ mac_disable_int(vptr->mac_regs);
+
+ velocity_tx_srv(vptr);
+
+ for (i = 0; i < vptr->tx.numq; i++) {
+ if (vptr->tx.used[i])
+ mac_tx_queue_wake(vptr->mac_regs, i);
+ }
+
+ mac_enable_int(vptr->mac_regs);
+ spin_unlock_irqrestore(&vptr->lock, flags);
+ netif_device_attach(vptr->netdev);
+
+ return 0;
+}
+#endif /* CONFIG_PM_SLEEP */
+
+static SIMPLE_DEV_PM_OPS(velocity_pm_ops, velocity_suspend, velocity_resume);
+
+/*
+ * Definition for our device driver. The PCI layer interface
+ * uses this to handle all our card discover and plugging
+ */
+static struct pci_driver velocity_pci_driver = {
+ .name = VELOCITY_NAME,
+ .id_table = velocity_pci_id_table,
+ .probe = velocity_pci_probe,
+ .remove = velocity_pci_remove,
+ .driver = {
+ .pm = &velocity_pm_ops,
+ },
+};
+
+static struct platform_driver velocity_platform_driver = {
+ .probe = velocity_platform_probe,
+ .remove = velocity_platform_remove,
+ .driver = {
+ .name = "via-velocity",
+ .of_match_table = velocity_of_ids,
+ .pm = &velocity_pm_ops,
+ },
+};
+
+/**
+ * velocity_ethtool_up - pre hook for ethtool
+ * @dev: network device
+ *
+ * Called before an ethtool operation. We need to make sure the
+ * chip is out of D3 state before we poke at it. In case of ethtool
+ * ops nesting, only wake the device up in the outermost block.
+ */
+static int velocity_ethtool_up(struct net_device *dev)
+{
+ struct velocity_info *vptr = netdev_priv(dev);
+
+ if (vptr->ethtool_ops_nesting == U32_MAX)
+ return -EBUSY;
+ if (!vptr->ethtool_ops_nesting++ && !netif_running(dev))
+ velocity_set_power_state(vptr, PCI_D0);
+ return 0;
+}
+
+/**
+ * velocity_ethtool_down - post hook for ethtool
+ * @dev: network device
+ *
+ * Called after an ethtool operation. Restore the chip back to D3
+ * state if it isn't running. In case of ethtool ops nesting, only
+ * put the device to sleep in the outermost block.
+ */
+static void velocity_ethtool_down(struct net_device *dev)
+{
+ struct velocity_info *vptr = netdev_priv(dev);
+
+ if (!--vptr->ethtool_ops_nesting && !netif_running(dev))
+ velocity_set_power_state(vptr, PCI_D3hot);
+}
+
+static int velocity_get_link_ksettings(struct net_device *dev,
+ struct ethtool_link_ksettings *cmd)
+{
+ struct velocity_info *vptr = netdev_priv(dev);
+ struct mac_regs __iomem *regs = vptr->mac_regs;
+ u32 status;
+ u32 supported, advertising;
+
+ status = check_connection_type(vptr->mac_regs);
+
+ supported = SUPPORTED_TP |
+ SUPPORTED_Autoneg |
+ SUPPORTED_10baseT_Half |
+ SUPPORTED_10baseT_Full |
+ SUPPORTED_100baseT_Half |
+ SUPPORTED_100baseT_Full |
+ SUPPORTED_1000baseT_Half |
+ SUPPORTED_1000baseT_Full;
+
+ advertising = ADVERTISED_TP | ADVERTISED_Autoneg;
+ if (vptr->options.spd_dpx == SPD_DPX_AUTO) {
+ advertising |=
+ ADVERTISED_10baseT_Half |
+ ADVERTISED_10baseT_Full |
+ ADVERTISED_100baseT_Half |
+ ADVERTISED_100baseT_Full |
+ ADVERTISED_1000baseT_Half |
+ ADVERTISED_1000baseT_Full;
+ } else {
+ switch (vptr->options.spd_dpx) {
+ case SPD_DPX_1000_FULL:
+ advertising |= ADVERTISED_1000baseT_Full;
+ break;
+ case SPD_DPX_100_HALF:
+ advertising |= ADVERTISED_100baseT_Half;
+ break;
+ case SPD_DPX_100_FULL:
+ advertising |= ADVERTISED_100baseT_Full;
+ break;
+ case SPD_DPX_10_HALF:
+ advertising |= ADVERTISED_10baseT_Half;
+ break;
+ case SPD_DPX_10_FULL:
+ advertising |= ADVERTISED_10baseT_Full;
+ break;
+ default:
+ break;
+ }
+ }
+
+ if (status & VELOCITY_SPEED_1000)
+ cmd->base.speed = SPEED_1000;
+ else if (status & VELOCITY_SPEED_100)
+ cmd->base.speed = SPEED_100;
+ else
+ cmd->base.speed = SPEED_10;
+
+ cmd->base.autoneg = (status & VELOCITY_AUTONEG_ENABLE) ?
+ AUTONEG_ENABLE : AUTONEG_DISABLE;
+ cmd->base.port = PORT_TP;
+ cmd->base.phy_address = readb(&regs->MIIADR) & 0x1F;
+
+ if (status & VELOCITY_DUPLEX_FULL)
+ cmd->base.duplex = DUPLEX_FULL;
+ else
+ cmd->base.duplex = DUPLEX_HALF;
+
+ ethtool_convert_legacy_u32_to_link_mode(cmd->link_modes.supported,
+ supported);
+ ethtool_convert_legacy_u32_to_link_mode(cmd->link_modes.advertising,
+ advertising);
+
+ return 0;
+}
+
+static int velocity_set_link_ksettings(struct net_device *dev,
+ const struct ethtool_link_ksettings *cmd)
+{
+ struct velocity_info *vptr = netdev_priv(dev);
+ u32 speed = cmd->base.speed;
+ u32 curr_status;
+ u32 new_status = 0;
+ int ret = 0;
+
+ curr_status = check_connection_type(vptr->mac_regs);
+ curr_status &= (~VELOCITY_LINK_FAIL);
+
+ new_status |= ((cmd->base.autoneg) ? VELOCITY_AUTONEG_ENABLE : 0);
+ new_status |= ((speed == SPEED_1000) ? VELOCITY_SPEED_1000 : 0);
+ new_status |= ((speed == SPEED_100) ? VELOCITY_SPEED_100 : 0);
+ new_status |= ((speed == SPEED_10) ? VELOCITY_SPEED_10 : 0);
+ new_status |= ((cmd->base.duplex == DUPLEX_FULL) ?
+ VELOCITY_DUPLEX_FULL : 0);
+
+ if ((new_status & VELOCITY_AUTONEG_ENABLE) &&
+ (new_status != (curr_status | VELOCITY_AUTONEG_ENABLE))) {
+ ret = -EINVAL;
+ } else {
+ enum speed_opt spd_dpx;
+
+ if (new_status & VELOCITY_AUTONEG_ENABLE)
+ spd_dpx = SPD_DPX_AUTO;
+ else if ((new_status & VELOCITY_SPEED_1000) &&
+ (new_status & VELOCITY_DUPLEX_FULL)) {
+ spd_dpx = SPD_DPX_1000_FULL;
+ } else if (new_status & VELOCITY_SPEED_100)
+ spd_dpx = (new_status & VELOCITY_DUPLEX_FULL) ?
+ SPD_DPX_100_FULL : SPD_DPX_100_HALF;
+ else if (new_status & VELOCITY_SPEED_10)
+ spd_dpx = (new_status & VELOCITY_DUPLEX_FULL) ?
+ SPD_DPX_10_FULL : SPD_DPX_10_HALF;
+ else
+ return -EOPNOTSUPP;
+
+ vptr->options.spd_dpx = spd_dpx;
+
+ velocity_set_media_mode(vptr, new_status);
+ }
+
+ return ret;
+}
+
+static void velocity_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
+{
+ struct velocity_info *vptr = netdev_priv(dev);
+
+ strscpy(info->driver, VELOCITY_NAME, sizeof(info->driver));
+ strscpy(info->version, VELOCITY_VERSION, sizeof(info->version));
+ if (vptr->pdev)
+ strscpy(info->bus_info, pci_name(vptr->pdev),
+ sizeof(info->bus_info));
+ else
+ strscpy(info->bus_info, "platform", sizeof(info->bus_info));
+}
+
+static void velocity_ethtool_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
+{
+ struct velocity_info *vptr = netdev_priv(dev);
+ wol->supported = WAKE_PHY | WAKE_MAGIC | WAKE_UCAST | WAKE_ARP;
+ wol->wolopts |= WAKE_MAGIC;
+ /*
+ if (vptr->wol_opts & VELOCITY_WOL_PHY)
+ wol.wolopts|=WAKE_PHY;
+ */
+ if (vptr->wol_opts & VELOCITY_WOL_UCAST)
+ wol->wolopts |= WAKE_UCAST;
+ if (vptr->wol_opts & VELOCITY_WOL_ARP)
+ wol->wolopts |= WAKE_ARP;
+ memcpy(&wol->sopass, vptr->wol_passwd, 6);
+}
+
+static int velocity_ethtool_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
+{
+ struct velocity_info *vptr = netdev_priv(dev);
+
+ if (!(wol->wolopts & (WAKE_PHY | WAKE_MAGIC | WAKE_UCAST | WAKE_ARP)))
+ return -EFAULT;
+ vptr->wol_opts = VELOCITY_WOL_MAGIC;
+
+ /*
+ if (wol.wolopts & WAKE_PHY) {
+ vptr->wol_opts|=VELOCITY_WOL_PHY;
+ vptr->flags |=VELOCITY_FLAGS_WOL_ENABLED;
+ }
+ */
+
+ if (wol->wolopts & WAKE_MAGIC) {
+ vptr->wol_opts |= VELOCITY_WOL_MAGIC;
+ vptr->flags |= VELOCITY_FLAGS_WOL_ENABLED;
+ }
+ if (wol->wolopts & WAKE_UCAST) {
+ vptr->wol_opts |= VELOCITY_WOL_UCAST;
+ vptr->flags |= VELOCITY_FLAGS_WOL_ENABLED;
+ }
+ if (wol->wolopts & WAKE_ARP) {
+ vptr->wol_opts |= VELOCITY_WOL_ARP;
+ vptr->flags |= VELOCITY_FLAGS_WOL_ENABLED;
+ }
+ memcpy(vptr->wol_passwd, wol->sopass, 6);
+ return 0;
+}
+
+static int get_pending_timer_val(int val)
+{
+ int mult_bits = val >> 6;
+ int mult = 1;
+
+ switch (mult_bits)
+ {
+ case 1:
+ mult = 4; break;
+ case 2:
+ mult = 16; break;
+ case 3:
+ mult = 64; break;
+ case 0:
+ default:
+ break;
+ }
+
+ return (val & 0x3f) * mult;
+}
+
+static void set_pending_timer_val(int *val, u32 us)
+{
+ u8 mult = 0;
+ u8 shift = 0;
+
+ if (us >= 0x3f) {
+ mult = 1; /* mult with 4 */
+ shift = 2;
+ }
+ if (us >= 0x3f * 4) {
+ mult = 2; /* mult with 16 */
+ shift = 4;
+ }
+ if (us >= 0x3f * 16) {
+ mult = 3; /* mult with 64 */
+ shift = 6;
+ }
+
+ *val = (mult << 6) | ((us >> shift) & 0x3f);
+}
+
+
+static int velocity_get_coalesce(struct net_device *dev,
+ struct ethtool_coalesce *ecmd,
+ struct kernel_ethtool_coalesce *kernel_coal,
+ struct netlink_ext_ack *extack)
+{
+ struct velocity_info *vptr = netdev_priv(dev);
+
+ ecmd->tx_max_coalesced_frames = vptr->options.tx_intsup;
+ ecmd->rx_max_coalesced_frames = vptr->options.rx_intsup;
+
+ ecmd->rx_coalesce_usecs = get_pending_timer_val(vptr->options.rxqueue_timer);
+ ecmd->tx_coalesce_usecs = get_pending_timer_val(vptr->options.txqueue_timer);
+
+ return 0;
+}
+
+static int velocity_set_coalesce(struct net_device *dev,
+ struct ethtool_coalesce *ecmd,
+ struct kernel_ethtool_coalesce *kernel_coal,
+ struct netlink_ext_ack *extack)
+{
+ struct velocity_info *vptr = netdev_priv(dev);
+ int max_us = 0x3f * 64;
+ unsigned long flags;
+
+ /* 6 bits of */
+ if (ecmd->tx_coalesce_usecs > max_us)
+ return -EINVAL;
+ if (ecmd->rx_coalesce_usecs > max_us)
+ return -EINVAL;
+
+ if (ecmd->tx_max_coalesced_frames > 0xff)
+ return -EINVAL;
+ if (ecmd->rx_max_coalesced_frames > 0xff)
+ return -EINVAL;
+
+ vptr->options.rx_intsup = ecmd->rx_max_coalesced_frames;
+ vptr->options.tx_intsup = ecmd->tx_max_coalesced_frames;
+
+ set_pending_timer_val(&vptr->options.rxqueue_timer,
+ ecmd->rx_coalesce_usecs);
+ set_pending_timer_val(&vptr->options.txqueue_timer,
+ ecmd->tx_coalesce_usecs);
+
+ /* Setup the interrupt suppression and queue timers */
+ spin_lock_irqsave(&vptr->lock, flags);
+ mac_disable_int(vptr->mac_regs);
+ setup_adaptive_interrupts(vptr);
+ setup_queue_timers(vptr);
+
+ mac_write_int_mask(vptr->int_mask, vptr->mac_regs);
+ mac_clear_isr(vptr->mac_regs);
+ mac_enable_int(vptr->mac_regs);
+ spin_unlock_irqrestore(&vptr->lock, flags);
+
+ return 0;
+}
+
+static const char velocity_gstrings[][ETH_GSTRING_LEN] = {
+ "rx_all",
+ "rx_ok",
+ "tx_ok",
+ "rx_error",
+ "rx_runt_ok",
+ "rx_runt_err",
+ "rx_64",
+ "tx_64",
+ "rx_65_to_127",
+ "tx_65_to_127",
+ "rx_128_to_255",
+ "tx_128_to_255",
+ "rx_256_to_511",
+ "tx_256_to_511",
+ "rx_512_to_1023",
+ "tx_512_to_1023",
+ "rx_1024_to_1518",
+ "tx_1024_to_1518",
+ "tx_ether_collisions",
+ "rx_crc_errors",
+ "rx_jumbo",
+ "tx_jumbo",
+ "rx_mac_control_frames",
+ "tx_mac_control_frames",
+ "rx_frame_alignment_errors",
+ "rx_long_ok",
+ "rx_long_err",
+ "tx_sqe_errors",
+ "rx_no_buf",
+ "rx_symbol_errors",
+ "in_range_length_errors",
+ "late_collisions"
+};
+
+static void velocity_get_strings(struct net_device *dev, u32 sset, u8 *data)
+{
+ switch (sset) {
+ case ETH_SS_STATS:
+ memcpy(data, *velocity_gstrings, sizeof(velocity_gstrings));
+ break;
+ }
+}
+
+static int velocity_get_sset_count(struct net_device *dev, int sset)
+{
+ switch (sset) {
+ case ETH_SS_STATS:
+ return ARRAY_SIZE(velocity_gstrings);
+ default:
+ return -EOPNOTSUPP;
+ }
+}
+
+static void velocity_get_ethtool_stats(struct net_device *dev,
+ struct ethtool_stats *stats, u64 *data)
+{
+ if (netif_running(dev)) {
+ struct velocity_info *vptr = netdev_priv(dev);
+ u32 *p = vptr->mib_counter;
+ int i;
+
+ spin_lock_irq(&vptr->lock);
+ velocity_update_hw_mibs(vptr);
+ spin_unlock_irq(&vptr->lock);
+
+ for (i = 0; i < ARRAY_SIZE(velocity_gstrings); i++)
+ *data++ = *p++;
+ }
+}
+
+static const struct ethtool_ops velocity_ethtool_ops = {
+ .supported_coalesce_params = ETHTOOL_COALESCE_USECS |
+ ETHTOOL_COALESCE_MAX_FRAMES,
+ .get_drvinfo = velocity_get_drvinfo,
+ .get_wol = velocity_ethtool_get_wol,
+ .set_wol = velocity_ethtool_set_wol,
+ .get_link = velocity_get_link,
+ .get_strings = velocity_get_strings,
+ .get_sset_count = velocity_get_sset_count,
+ .get_ethtool_stats = velocity_get_ethtool_stats,
+ .get_coalesce = velocity_get_coalesce,
+ .set_coalesce = velocity_set_coalesce,
+ .begin = velocity_ethtool_up,
+ .complete = velocity_ethtool_down,
+ .get_link_ksettings = velocity_get_link_ksettings,
+ .set_link_ksettings = velocity_set_link_ksettings,
+};
+
+#if defined(CONFIG_PM) && defined(CONFIG_INET)
+static int velocity_netdev_event(struct notifier_block *nb, unsigned long notification, void *ptr)
+{
+ struct in_ifaddr *ifa = ptr;
+ struct net_device *dev = ifa->ifa_dev->dev;
+
+ if (dev_net(dev) == &init_net &&
+ dev->netdev_ops == &velocity_netdev_ops)
+ velocity_get_ip(netdev_priv(dev));
+
+ return NOTIFY_DONE;
+}
+
+static struct notifier_block velocity_inetaddr_notifier = {
+ .notifier_call = velocity_netdev_event,
+};
+
+static void velocity_register_notifier(void)
+{
+ register_inetaddr_notifier(&velocity_inetaddr_notifier);
+}
+
+static void velocity_unregister_notifier(void)
+{
+ unregister_inetaddr_notifier(&velocity_inetaddr_notifier);
+}
+
+#else
+
+#define velocity_register_notifier() do {} while (0)
+#define velocity_unregister_notifier() do {} while (0)
+
+#endif /* defined(CONFIG_PM) && defined(CONFIG_INET) */
+
+/**
+ * velocity_init_module - load time function
+ *
+ * Called when the velocity module is loaded. The PCI driver
+ * is registered with the PCI layer, and in turn will call
+ * the probe functions for each velocity adapter installed
+ * in the system.
+ */
+static int __init velocity_init_module(void)
+{
+ int ret_pci, ret_platform;
+
+ velocity_register_notifier();
+
+ ret_pci = pci_register_driver(&velocity_pci_driver);
+ ret_platform = platform_driver_register(&velocity_platform_driver);
+
+ /* if both_registers failed, remove the notifier */
+ if ((ret_pci < 0) && (ret_platform < 0)) {
+ velocity_unregister_notifier();
+ return ret_pci;
+ }
+
+ return 0;
+}
+
+/**
+ * velocity_cleanup_module - module unload
+ *
+ * When the velocity hardware is unloaded this function is called.
+ * It will clean up the notifiers and the unregister the PCI
+ * driver interface for this hardware. This in turn cleans up
+ * all discovered interfaces before returning from the function
+ */
+static void __exit velocity_cleanup_module(void)
+{
+ velocity_unregister_notifier();
+
+ pci_unregister_driver(&velocity_pci_driver);
+ platform_driver_unregister(&velocity_platform_driver);
+}
+
+module_init(velocity_init_module);
+module_exit(velocity_cleanup_module);