diff options
Diffstat (limited to 'drivers/net/ethernet/xscale/ixp4xx_eth.c')
| -rw-r--r-- | drivers/net/ethernet/xscale/ixp4xx_eth.c | 77 |
1 files changed, 69 insertions, 8 deletions
diff --git a/drivers/net/ethernet/xscale/ixp4xx_eth.c b/drivers/net/ethernet/xscale/ixp4xx_eth.c index 3b0c5f1774..e0d26148df 100644 --- a/drivers/net/ethernet/xscale/ixp4xx_eth.c +++ b/drivers/net/ethernet/xscale/ixp4xx_eth.c @@ -24,6 +24,7 @@ #include <linux/dma-mapping.h> #include <linux/dmapool.h> #include <linux/etherdevice.h> +#include <linux/if_vlan.h> #include <linux/io.h> #include <linux/kernel.h> #include <linux/net_tstamp.h> @@ -63,7 +64,15 @@ #define POOL_ALLOC_SIZE (sizeof(struct desc) * (RX_DESCS + TX_DESCS)) #define REGS_SIZE 0x1000 -#define MAX_MRU 1536 /* 0x600 */ + +/* MRU is said to be 14320 in a code dump, the SW manual says that + * MRU/MTU is 16320 and includes VLAN and ethernet headers. + * See "IXP400 Software Programmer's Guide" section 10.3.2, page 161. + * + * FIXME: we have chosen the safe default (14320) but if you can test + * jumboframes, experiment with 16320 and see what happens! + */ +#define MAX_MRU (14320 - VLAN_ETH_HLEN) #define RX_BUFF_SIZE ALIGN((NET_IP_ALIGN) + MAX_MRU, 4) #define NAPI_WEIGHT 16 @@ -154,7 +163,6 @@ typedef void buffer_t; /* Information about built-in Ethernet MAC interfaces */ struct eth_plat_info { - u8 phy; /* MII PHY ID, 0 - 31 */ u8 rxq; /* configurable, currently 0 - 31 only */ u8 txreadyq; u8 hwaddr[ETH_ALEN]; @@ -714,9 +722,9 @@ static int eth_poll(struct napi_struct *napi, int budget) napi_complete(napi); qmgr_enable_irq(rxq); if (!qmgr_stat_below_low_watermark(rxq) && - napi_reschedule(napi)) { /* not empty again */ + napi_schedule(napi)) { /* not empty again */ #if DEBUG_RX - netdev_debug(dev, "eth_poll napi_reschedule succeeded\n"); + netdev_debug(dev, "eth_poll napi_schedule succeeded\n"); #endif qmgr_disable_irq(rxq); continue; @@ -1182,6 +1190,54 @@ static void destroy_queues(struct port *port) } } +static int ixp4xx_do_change_mtu(struct net_device *dev, int new_mtu) +{ + struct port *port = netdev_priv(dev); + struct npe *npe = port->npe; + int framesize, chunks; + struct msg msg = {}; + + /* adjust for ethernet headers */ + framesize = new_mtu + VLAN_ETH_HLEN; + /* max rx/tx 64 byte chunks */ + chunks = DIV_ROUND_UP(framesize, 64); + + msg.cmd = NPE_SETMAXFRAMELENGTHS; + msg.eth_id = port->id; + + /* Firmware wants to know buffer size in 64 byte chunks */ + msg.byte2 = chunks << 8; + msg.byte3 = chunks << 8; + + msg.byte4 = msg.byte6 = framesize >> 8; + msg.byte5 = msg.byte7 = framesize & 0xff; + + if (npe_send_recv_message(npe, &msg, "ETH_SET_MAX_FRAME_LENGTH")) + return -EIO; + netdev_dbg(dev, "set MTU on NPE %s to %d bytes\n", + npe_name(npe), new_mtu); + + return 0; +} + +static int ixp4xx_eth_change_mtu(struct net_device *dev, int new_mtu) +{ + int ret; + + /* MTU can only be changed when the interface is up. We also + * set the MTU from dev->mtu when opening the device. + */ + if (dev->flags & IFF_UP) { + ret = ixp4xx_do_change_mtu(dev, new_mtu); + if (ret < 0) + return ret; + } + + dev->mtu = new_mtu; + + return 0; +} + static int eth_open(struct net_device *dev) { struct port *port = netdev_priv(dev); @@ -1232,6 +1288,8 @@ static int eth_open(struct net_device *dev) if (npe_send_recv_message(port->npe, &msg, "ETH_SET_FIREWALL_MODE")) return -EIO; + ixp4xx_do_change_mtu(dev, dev->mtu); + if ((err = request_queues(port)) != 0) return err; @@ -1374,6 +1432,7 @@ static int eth_close(struct net_device *dev) static const struct net_device_ops ixp4xx_netdev_ops = { .ndo_open = eth_open, .ndo_stop = eth_close, + .ndo_change_mtu = ixp4xx_eth_change_mtu, .ndo_start_xmit = eth_xmit, .ndo_set_rx_mode = eth_set_mcast_list, .ndo_eth_ioctl = eth_ioctl, @@ -1488,6 +1547,9 @@ static int ixp4xx_eth_probe(struct platform_device *pdev) ndev->dev.dma_mask = dev->dma_mask; ndev->dev.coherent_dma_mask = dev->coherent_dma_mask; + ndev->min_mtu = ETH_MIN_MTU; + ndev->max_mtu = MAX_MRU; + netif_napi_add_weight(ndev, &port->napi, eth_poll, NAPI_WEIGHT); if (!(port->npe = npe_request(NPE_ID(port->id)))) @@ -1520,7 +1582,7 @@ static int ixp4xx_eth_probe(struct platform_device *pdev) if ((err = register_netdev(ndev))) goto err_phy_dis; - netdev_info(ndev, "%s: MII PHY %i on %s\n", ndev->name, plat->phy, + netdev_info(ndev, "%s: MII PHY %s on %s\n", ndev->name, phydev_name(phydev), npe_name(port->npe)); return 0; @@ -1533,7 +1595,7 @@ err_free_mem: return err; } -static int ixp4xx_eth_remove(struct platform_device *pdev) +static void ixp4xx_eth_remove(struct platform_device *pdev) { struct net_device *ndev = platform_get_drvdata(pdev); struct phy_device *phydev = ndev->phydev; @@ -1544,7 +1606,6 @@ static int ixp4xx_eth_remove(struct platform_device *pdev) ixp4xx_mdio_remove(); npe_port_tab[NPE_ID(port->id)] = NULL; npe_release(port->npe); - return 0; } static const struct of_device_id ixp4xx_eth_of_match[] = { @@ -1560,7 +1621,7 @@ static struct platform_driver ixp4xx_eth_driver = { .of_match_table = of_match_ptr(ixp4xx_eth_of_match), }, .probe = ixp4xx_eth_probe, - .remove = ixp4xx_eth_remove, + .remove_new = ixp4xx_eth_remove, }; module_platform_driver(ixp4xx_eth_driver); |